diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2011-03-01 20:10:46 +0000 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2011-03-01 23:30:53 +0000 |
| commit | 4a5f7bda8fe9d0ed08ed4c5beb5dc3fa62f09d05 (patch) | |
| tree | 5934fb36dc1cc858100893b70bbb0cbd27a57c68 /sound/soc/codecs/wm9081.c | |
| parent | 49542656ade68b4d4952feec6a4d508fd32be6f1 (diff) | |
ASoC: Add platform data for WM9081 IRQ pin configuration
The WM9081 IRQ output can be either active high or active low and can
support either CMOS or open drain modes.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'sound/soc/codecs/wm9081.c')
| -rw-r--r-- | sound/soc/codecs/wm9081.c | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index 2103623a077..7883f3ed797 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -167,7 +167,7 @@ struct wm9081_priv { int fll_fref; int fll_fout; int tdm_width; - struct wm9081_retune_mobile_config *retune; + struct wm9081_pdata pdata; }; static int wm9081_volatile_register(struct snd_soc_codec *codec, unsigned int reg) @@ -1082,21 +1082,22 @@ static int wm9081_hw_params(struct snd_pcm_substream *substream, aif4 |= wm9081->bclk / wm9081->fs; /* Apply a ReTune Mobile configuration if it's in use */ - if (wm9081->retune) { - struct wm9081_retune_mobile_config *retune = wm9081->retune; + if (wm9081->pdata.num_retune_configs) { + struct wm9081_pdata *pdata = &wm9081->pdata; struct wm9081_retune_mobile_setting *s; int eq1; best = 0; - best_val = abs(retune->configs[0].rate - wm9081->fs); - for (i = 0; i < retune->num_configs; i++) { - cur_val = abs(retune->configs[i].rate - wm9081->fs); + best_val = abs(pdata->retune_configs[0].rate - wm9081->fs); + for (i = 0; i < pdata->num_retune_configs; i++) { + cur_val = abs(pdata->retune_configs[i].rate - + wm9081->fs); if (cur_val < best_val) { best_val = cur_val; best = i; } } - s = &retune->configs[best]; + s = &pdata->retune_configs[best]; dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n", s->name, s->rate); @@ -1255,6 +1256,14 @@ static int wm9081_probe(struct snd_soc_codec *codec) return ret; } + reg = 0; + if (wm9081->pdata.irq_high) + reg |= WM9081_IRQ_POL; + if (!wm9081->pdata.irq_cmos) + reg |= WM9081_IRQ_OP_CTRL; + snd_soc_update_bits(codec, WM9081_INTERRUPT_CONTROL, + WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg); + wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* Enable zero cross by default */ @@ -1266,7 +1275,7 @@ static int wm9081_probe(struct snd_soc_codec *codec) snd_soc_add_controls(codec, wm9081_snd_controls, ARRAY_SIZE(wm9081_snd_controls)); - if (!wm9081->retune) { + if (!wm9081->pdata.num_retune_configs) { dev_dbg(codec->dev, "No ReTune Mobile data, using normal EQ\n"); snd_soc_add_controls(codec, wm9081_eq_controls, @@ -1343,8 +1352,8 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, wm9081->control_data = i2c; if (dev_get_platdata(&i2c->dev)) - memcpy(&wm9081->retune, dev_get_platdata(&i2c->dev), - sizeof(wm9081->retune)); + memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev), + sizeof(wm9081->pdata)); ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm9081, &wm9081_dai, 1); |