Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull updates of sound stuff from Takashi Iwai:
 "Here is the first big update chunk of sound stuff for 3.4-rc1.

  In the common sound infrastructure, there are a few changes for
  dynamic PCM support (used in ASoC) and a few clean-ups.  Majority of
  changes are found, as usual, in HD-audio and ASoC.

  Some highlights of HD-audio changes:

   - All the long-standing static quirk codes for Realtek codec were
     finally removed by fixing and extending the Realtek auto-parser.

   - The mute-LED control is standardized over all HD-audio codec
     drivers using the extended vmaster hook.

   - The vmaster slave mixer elements are initialized to 0dB as default
     so that the user won't be annoyed by the silent output after
     updates, e.g.  due to the additions of new elements.

   - Other many fix-ups for the misc HD-audio devices.

  In the ASoC side, this is a very active release, including a quite a
  few framework enhancements.  Some highlights:

   - Support for widgets not associated with a CODEC, an important part
     of the dynamic PCM framework.

   - A library factoring out the common code shared by dmaengine based
     DMA drivers contributed by Lars-Peter Clausen.  This will save a
     lot of code and make it much easier to deploy enhancements to
     dmaengine.

   - Support for binary controls, used for providing runtime
     configuration of algorithm coefficients.

   - A new DAPM widget type for regulator supplies allowing drivers for
     devices that can power down unused supplies while active to do
     without any per-driver code.

   - DAPM widgets for DAIs, initially giving a speed boost for playback
     startup and shutdown and also the basis for CODEC<->CODEC DAI link
     support.

   - Support for specifying the number of significant bits on audio
     interfaces, useful for allowing applications to know how much
     effort to put into generating data for a larger sample format.

   - Conversion of the FSI driver used on some SH processors to
     DMAEngine.

   - Conversion of EP93xx drivers to DMAEngine.

   - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics
     WM2200.

   - Move audmux driver from arc/arm to sound/soc

   - McBSP move from arch/ to sound/ and updates

  Also, a few small updates and fixes for other drivers like au88x0,
  ymfpci, USB 6fire, USB usx2yaudio are included."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits)
  ASoC: wm8994: Provide VMID mode control and fix default sequence
  ASoC: wm8994: Add missing break in resume
  ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF
  ASoC: pxa-ssp: atomically set stream active masks
  ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
  ASoC: Samsung: Added to support mono recording
  ALSA: hda - Fix build with CONFIG_PM=n
  ALSA: au88x0 - Avoid possible Oops at unbinding
  ALSA: usb-audio - Fix build error by consitification of rate list
  ASoC: core: Fix obscure leak of runtime array
  ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()
  ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
  ASoC: wm8996: Add 44.1kHz support
  ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE
  ASoC: mx27vis-aic32x4: Convert it to platform driver
  ALSA: hda - fix printing of high HDMI sample rates
  ALSA: ymfpci - Fix legacy registers on S3/S4 resume
  ALSA: control - Fixe a trailing white space error
  ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()
  ALSA: hda - Add "Mute-LED Mode" enum control
  ...

1 files changed, 21 insertions, 59 deletions

diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index a6bab392700..076c126ed9b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -824,6 +824,8 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
 static int wm9081_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
+	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
+
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		break;
@@ -841,6 +843,9 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec,
 	case SND_SOC_BIAS_STANDBY:
 		/* Initial cold start */
 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+			regcache_cache_only(wm9081->regmap, false);
+			regcache_sync(wm9081->regmap);
+
 			/* Disable LINEOUT discharge */
 			snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
 					    WM9081_LINEOUT_DISCH, 0);
@@ -892,6 +897,8 @@ static int wm9081_set_bias_level(struct snd_soc_codec *codec,
 		snd_soc_update_bits(codec, WM9081_ANTI_POP_CONTROL,
 				    WM9081_LINEOUT_DISCH,
 				    WM9081_LINEOUT_DISCH);
+
+		regcache_cache_only(wm9081->regmap, true);
 		break;
 	}
 
@@ -1258,7 +1265,6 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 {
 	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
 	int ret;
-	u16 reg;
 
 	codec->control_data = wm9081->regmap;
 
@@ -1268,16 +1274,6 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 		return ret;
 	}
 
-	reg = 0;
-	if (wm9081->pdata.irq_high)
-		reg |= WM9081_IRQ_POL;
-	if (!wm9081->pdata.irq_cmos)
-		reg |= WM9081_IRQ_OP_CTRL;
-	snd_soc_update_bits(codec, WM9081_INTERRUPT_CONTROL,
-			    WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);
-
-	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	/* Enable zero cross by default */
 	snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
 			    WM9081_LINEOUTZC, WM9081_LINEOUTZC);
@@ -1287,7 +1283,7 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 	if (!wm9081->pdata.num_retune_configs) {
 		dev_dbg(codec->dev,
 			"No ReTune Mobile data, using normal EQ\n");
-		snd_soc_add_controls(codec, wm9081_eq_controls,
+		snd_soc_add_codec_controls(codec, wm9081_eq_controls,
 				     ARRAY_SIZE(wm9081_eq_controls));
 	}
 
@@ -1300,38 +1296,15 @@ static int wm9081_remove(struct snd_soc_codec *codec)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm9081_suspend(struct snd_soc_codec *codec)
-{
-	wm9081_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
-	return 0;
-}
-
-static int wm9081_resume(struct snd_soc_codec *codec)
-{
-	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
-
-	regcache_sync(wm9081->regmap);
-
-	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
-	return 0;
-}
-#else
-#define wm9081_suspend NULL
-#define wm9081_resume NULL
-#endif
-
 static struct snd_soc_codec_driver soc_codec_dev_wm9081 = {
 	.probe = 	wm9081_probe,
 	.remove = 	wm9081_remove,
-	.suspend =	wm9081_suspend,
-	.resume =	wm9081_resume,
 
 	.set_sysclk = wm9081_set_sysclk,
 	.set_bias_level = wm9081_set_bias_level,
 
+	.idle_bias_off = true,
+
 	.controls         = wm9081_snd_controls,
 	.num_controls     = ARRAY_SIZE(wm9081_snd_controls),
 	.dapm_widgets	  = wm9081_dapm_widgets,
@@ -1395,6 +1368,16 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
 		memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev),
 		       sizeof(wm9081->pdata));
 
+	reg = 0;
+	if (wm9081->pdata.irq_high)
+		reg |= WM9081_IRQ_POL;
+	if (!wm9081->pdata.irq_cmos)
+		reg |= WM9081_IRQ_OP_CTRL;
+	regmap_update_bits(wm9081->regmap, WM9081_INTERRUPT_CONTROL,
+			   WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);
+
+	regcache_cache_only(wm9081->regmap, true);
+
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm9081, &wm9081_dai, 1);
 	if (ret < 0)
@@ -1435,28 +1418,7 @@ static struct i2c_driver wm9081_i2c_driver = {
 };
 #endif
 
-static int __init wm9081_modinit(void)
-{
-	int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	ret = i2c_add_driver(&wm9081_i2c_driver);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to register WM9081 I2C driver: %d\n",
-		       ret);
-	}
-#endif
-	return ret;
-}
-module_init(wm9081_modinit);
-
-static void __exit wm9081_exit(void)
-{
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_del_driver(&wm9081_i2c_driver);
-#endif
-}
-module_exit(wm9081_exit);
-
+module_i2c_driver(wm9081_i2c_driver);
 
 MODULE_DESCRIPTION("ASoC WM9081 driver");
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");