ASoC: wm_hubs: Improve single ended line output enable performance

The enable of the single ended line outputs on wm_hubs devices performs
better if the output is enabled prior to starting VMID. Since inactive
outputs are held at VMID anyway there is little cost to doing this for
unused outputs. Add callbacks into wm_hubs and keep track of which outputs
are really active so we can disable them once we're active.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 105 insertions, 8 deletions

diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index a53daf64aa4..f7650c5cc5c 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -500,6 +500,36 @@ static int earpiece_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int lineout_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *control, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
+	bool *flag;
+
+	switch (w->shift) {
+	case WM8993_LINEOUT1N_ENA_SHIFT:
+		flag = &hubs->lineout1n_ena;
+		break;
+	case WM8993_LINEOUT1P_ENA_SHIFT:
+		flag = &hubs->lineout1p_ena;
+		break;
+	case WM8993_LINEOUT2N_ENA_SHIFT:
+		flag = &hubs->lineout2n_ena;
+		break;
+	case WM8993_LINEOUT2P_ENA_SHIFT:
+		flag = &hubs->lineout2p_ena;
+		break;
+	default:
+		WARN(1, "Unknown line output");
+		return -EINVAL;
+	}
+
+	*flag = SND_SOC_DAPM_EVENT_ON(event);
+
+	return 0;
+}
+
 static const struct snd_kcontrol_new in1l_pga[] = {
 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0),
 SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0),
@@ -675,14 +705,18 @@ SND_SOC_DAPM_MIXER("LINEOUT2N Mixer", SND_SOC_NOPM, 0, 0,
 SND_SOC_DAPM_MIXER("LINEOUT2P Mixer", SND_SOC_NOPM, 0, 0,
 		   line2p_mix, ARRAY_SIZE(line2p_mix)),
 
-SND_SOC_DAPM_OUT_DRV("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0,
-		     NULL, 0),
-SND_SOC_DAPM_OUT_DRV("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0,
-		     NULL, 0),
-SND_SOC_DAPM_OUT_DRV("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0,
-		     NULL, 0),
-SND_SOC_DAPM_OUT_DRV("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0,
-		     NULL, 0),
+SND_SOC_DAPM_OUT_DRV_E("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0,
+		       NULL, 0, lineout_event,
+		     SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_OUT_DRV_E("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0,
+		       NULL, 0, lineout_event,
+		       SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_OUT_DRV_E("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0,
+		       NULL, 0, lineout_event,
+		       SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_OUT_DRV_E("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0,
+		       NULL, 0, lineout_event,
+		       SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 
 SND_SOC_DAPM_OUTPUT("SPKOUTLP"),
 SND_SOC_DAPM_OUTPUT("SPKOUTLN"),
@@ -949,6 +983,11 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec,
 				  int jd_scthr, int jd_thr, int micbias1_lvl,
 				  int micbias2_lvl)
 {
+	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
+
+	hubs->lineout1_se = !lineout1_diff;
+	hubs->lineout2_se = !lineout2_diff;
+
 	if (!lineout1_diff)
 		snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
 				    WM8993_LINEOUT1_MODE,
@@ -978,6 +1017,64 @@ int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec,
 }
 EXPORT_SYMBOL_GPL(wm_hubs_handle_analogue_pdata);
 
+void wm_hubs_vmid_ena(struct snd_soc_codec *codec)
+{
+	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
+	int val = 0;
+
+	if (hubs->lineout1_se)
+		val |= WM8993_LINEOUT1N_ENA | WM8993_LINEOUT1P_ENA;
+
+	if (hubs->lineout2_se)
+		val |= WM8993_LINEOUT2N_ENA | WM8993_LINEOUT2P_ENA;
+
+	/* Enable the line outputs while we power up */
+	snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_3, val, val);
+}
+EXPORT_SYMBOL_GPL(wm_hubs_vmid_ena);
+
+void wm_hubs_set_bias_level(struct snd_soc_codec *codec,
+			    enum snd_soc_bias_level level)
+{
+	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
+	int val;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* Turn off any unneded single ended outputs */
+		val = 0;
+
+		if (hubs->lineout1_se && hubs->lineout1n_ena)
+			val |= WM8993_LINEOUT1N_ENA;
+
+		if (hubs->lineout1_se && hubs->lineout1p_ena)
+			val |= WM8993_LINEOUT1P_ENA;
+
+		if (hubs->lineout2_se && hubs->lineout2n_ena)
+			val |= WM8993_LINEOUT2N_ENA;
+
+		if (hubs->lineout2_se && hubs->lineout2p_ena)
+			val |= WM8993_LINEOUT2P_ENA;
+
+		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_3,
+				    WM8993_LINEOUT1N_ENA |
+				    WM8993_LINEOUT1P_ENA |
+				    WM8993_LINEOUT2N_ENA |
+				    WM8993_LINEOUT2P_ENA,
+				    val);
+
+		if (!hubs->lineout1n_ena && !hubs->lineout1p_ena &&
+		    !hubs->lineout2n_ena && !hubs->lineout2p_ena)
+			snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+					    WM8993_LINEOUT_VMID_BUF_ENA, 0);
+		break;
+
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(wm_hubs_set_bias_level);
+
 MODULE_DESCRIPTION("Shared support for Wolfson hubs products");
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_LICENSE("GPL");