Merge branch 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

* 'imx/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx51-babbage: fix esdhc cd/wp properties
  ARM: imx6: spin the cpu until hardware takes it down
  ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path

Also updates to Linux 3.6-rc2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 24 insertions, 0 deletions

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index aba71bfa33b..b3030718c22 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -394,9 +394,14 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *cpu_dai)
 {
 	struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
+	struct mxs_saif *master_saif;
 	u32 scr, stat;
 	int ret;
 
+	master_saif = mxs_saif_get_master(saif);
+	if (!master_saif)
+		return -EINVAL;
+
 	/* mclk should already be set */
 	if (!saif->mclk && saif->mclk_in_use) {
 		dev_err(cpu_dai->dev, "set mclk first\n");
@@ -420,6 +425,25 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
+	/* prepare clk in hw_param, enable in trigger */
+	clk_prepare(saif->clk);
+	if (saif != master_saif) {
+		/*
+		* Set an initial clock rate for the saif internal logic to work
+		* properly. This is important when working in EXTMASTER mode
+		* that uses the other saif's BITCLK&LRCLK but it still needs a
+		* basic clock which should be fast enough for the internal
+		* logic.
+		*/
+		clk_enable(saif->clk);
+		ret = clk_set_rate(saif->clk, 24000000);
+		clk_disable(saif->clk);
+		if (ret)
+			return ret;
+
+		clk_prepare(master_saif->clk);
+	}
+
 	scr = __raw_readl(saif->base + SAIF_CTRL);
 
 	scr &= ~BM_SAIF_CTRL_WORD_LENGTH;