Merge tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no too intrusive changes in this update batch.  The biggest
  LOC is found in the new DICE driver, and other small changes are
  scattered over the whole sound subtree (which is a common pattern).

  Below are highlights:

   - ALSA core:
     * Memory allocation support with genpool
     * Fix blocking in drain ioctl of compress_offload

   - HD-audio:
     * Improved AMD HDMI supports
     * Intel HDMI detection improvements
     * thinkpad_acpi mute-key integration
     * New PCI ID, New ALC255,285,293 codecs, CX20952

   - USB-audio:
     * New buffer size management
     * Clean up endpoint handling codes

   - ASoC:
     * Further work on the dmaengine helpers, including support for
       configuring the parameters for DMA by reading the capabilities of
       the DMA controller which removes some guesswork and magic numbers
       from drivers.
     * A refresh of the documentation.
     * Conversions of many drivers to direct regmap API usage in order
       to allow the ASoC level register I/O code to be removed, this
       will hopefully be completed by v3.14.
     * Support for using async register I/O in DAPM, reducing the time
       taken to implement power transitions on systems that support it.

   - Firewire: DICE driver

   - Lots of small fixes for bugs reported by Coverity"

* tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits)
  ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
  ALSA: hda - Apply MacBook fixups for CS4208 correctly
  ASoC: fsl: imx-wm8962: remove an unneeded check
  ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
  ALSA: hda/realtek - Make fixup regs persist after resume
  ALSA: hda_intel: ratelimit "spurious response" message
  ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
  ASoC: dapm: Use WARN_ON() instead of BUG_ON()
  ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
  ASoC: Replace BUG() with WARN()
  ASoC: wm_hubs: Replace BUG() with WARN()
  ASoC: wm8996: Replace BUG() with WARN()
  ASoC: wm8962: Replace BUG() with WARN()
  ASoC: wm8958: Replace BUG() with WARN()
  ASoC: wm8904: Replace BUG() with WARN()
  ASoC: wm8900: Replace BUG() with WARN()
  ASoC: wm8350: Replace BUG() with WARN()
  ASoC: txx9: Use WARN_ON() instead of BUG_ON()
  ASoC: sh: Use WARN_ON() instead of BUG_ON()
  ASoC: rcar: Use WARN_ON() instead of BUG_ON()
  ...

1 files changed, 73 insertions, 66 deletions

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 93e970f2b3c..b9ba0fcc45d 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -33,7 +33,6 @@
 #include "pcm.h"
 #include "quirks.h"
 
-#define EP_FLAG_ACTIVATED	0
 #define EP_FLAG_RUNNING		1
 #define EP_FLAG_STOPPING	2
 
@@ -426,9 +425,9 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 	list_for_each_entry(ep, &chip->ep_list, list) {
 		if (ep->ep_num == ep_num &&
 		    ep->iface == alts->desc.bInterfaceNumber &&
-		    ep->alt_idx == alts->desc.bAlternateSetting) {
+		    ep->altsetting == alts->desc.bAlternateSetting) {
 			snd_printdd(KERN_DEBUG "Re-using EP %x in iface %d,%d @%p\n",
-					ep_num, ep->iface, ep->alt_idx, ep);
+					ep_num, ep->iface, ep->altsetting, ep);
 			goto __exit_unlock;
 		}
 	}
@@ -447,7 +446,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 	ep->type = type;
 	ep->ep_num = ep_num;
 	ep->iface = alts->desc.bInterfaceNumber;
-	ep->alt_idx = alts->desc.bAlternateSetting;
+	ep->altsetting = alts->desc.bAlternateSetting;
 	INIT_LIST_HEAD(&ep->ready_playback_urbs);
 	ep_num &= USB_ENDPOINT_NUMBER_MASK;
 
@@ -574,11 +573,14 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 			      snd_pcm_format_t pcm_format,
 			      unsigned int channels,
 			      unsigned int period_bytes,
+			      unsigned int frames_per_period,
+			      unsigned int periods_per_buffer,
 			      struct audioformat *fmt,
 			      struct snd_usb_endpoint *sync_ep)
 {
-	unsigned int maxsize, i, urb_packs, total_packs, packs_per_ms;
-	int is_playback = usb_pipeout(ep->pipe);
+	unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb;
+	unsigned int max_packs_per_period, urbs_per_period, urb_packs;
+	unsigned int max_urbs, i;
 	int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
 
 	if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) {
@@ -611,58 +613,67 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 	else
 		ep->curpacksize = maxsize;
 
-	if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL)
+	if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) {
 		packs_per_ms = 8 >> ep->datainterval;
-	else
-		packs_per_ms = 1;
-
-	if (is_playback && !snd_usb_endpoint_implicit_feedback_sink(ep)) {
-		urb_packs = max(ep->chip->nrpacks, 1);
-		urb_packs = min(urb_packs, (unsigned int) MAX_PACKS);
+		max_packs_per_urb = MAX_PACKS_HS;
 	} else {
-		urb_packs = 1;
+		packs_per_ms = 1;
+		max_packs_per_urb = MAX_PACKS;
 	}
+	if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
+		max_packs_per_urb = min(max_packs_per_urb,
+					1U << sync_ep->syncinterval);
+	max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval);
 
-	urb_packs *= packs_per_ms;
+	/*
+	 * Capture endpoints need to use small URBs because there's no way
+	 * to tell in advance where the next period will end, and we don't
+	 * want the next URB to complete much after the period ends.
+	 *
+	 * Playback endpoints with implicit sync much use the same parameters
+	 * as their corresponding capture endpoint.
+	 */
+	if (usb_pipein(ep->pipe) ||
+			snd_usb_endpoint_implicit_feedback_sink(ep)) {
 
-	if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep))
-		urb_packs = min(urb_packs, 1U << sync_ep->syncinterval);
+		/* make capture URBs <= 1 ms and smaller than a period */
+		urb_packs = min(max_packs_per_urb, packs_per_ms);
+		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
+			urb_packs >>= 1;
+		ep->nurbs = MAX_URBS;
 
-	/* decide how many packets to be used */
-	if (is_playback && !snd_usb_endpoint_implicit_feedback_sink(ep)) {
-		unsigned int minsize, maxpacks;
+	/*
+	 * Playback endpoints without implicit sync are adjusted so that
+	 * a period fits as evenly as possible in the smallest number of
+	 * URBs.  The total number of URBs is adjusted to the size of the
+	 * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits.
+	 */
+	} else {
 		/* determine how small a packet can be */
-		minsize = (ep->freqn >> (16 - ep->datainterval))
-			  * (frame_bits >> 3);
+		minsize = (ep->freqn >> (16 - ep->datainterval)) *
+				(frame_bits >> 3);
 		/* with sync from device, assume it can be 12% lower */
 		if (sync_ep)
 			minsize -= minsize >> 3;
 		minsize = max(minsize, 1u);
-		total_packs = (period_bytes + minsize - 1) / minsize;
-		/* we need at least two URBs for queueing */
-		if (total_packs < 2) {
-			total_packs = 2;
-		} else {
-			/* and we don't want too long a queue either */
-			maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
-			total_packs = min(total_packs, maxpacks);
-		}
-	} else {
-		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
-			urb_packs >>= 1;
-		total_packs = MAX_URBS * urb_packs;
-	}
 
-	ep->nurbs = (total_packs + urb_packs - 1) / urb_packs;
-	if (ep->nurbs > MAX_URBS) {
-		/* too much... */
-		ep->nurbs = MAX_URBS;
-		total_packs = MAX_URBS * urb_packs;
-	} else if (ep->nurbs < 2) {
-		/* too little - we need at least two packets
-		 * to ensure contiguous playback/capture
-		 */
-		ep->nurbs = 2;
+		/* how many packets will contain an entire ALSA period? */
+		max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize);
+
+		/* how many URBs will contain a period? */
+		urbs_per_period = DIV_ROUND_UP(max_packs_per_period,
+				max_packs_per_urb);
+		/* how many packets are needed in each URB? */
+		urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period);
+
+		/* limit the number of frames in a single URB */
+		ep->max_urb_frames = DIV_ROUND_UP(frames_per_period,
+					urbs_per_period);
+
+		/* try to use enough URBs to contain an entire ALSA buffer */
+		max_urbs = min((unsigned) MAX_URBS,
+				MAX_QUEUE * packs_per_ms / urb_packs);
+		ep->nurbs = min(max_urbs, urbs_per_period * periods_per_buffer);
 	}
 
 	/* allocate and initialize data urbs */
@@ -670,8 +681,7 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
 		struct snd_urb_ctx *u = &ep->urb[i];
 		u->index = i;
 		u->ep = ep;
-		u->packets = (i + 1) * total_packs / ep->nurbs
-			- i * total_packs / ep->nurbs;
+		u->packets = urb_packs;
 		u->buffer_size = maxsize * u->packets;
 
 		if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
@@ -703,8 +713,7 @@ out_of_memory:
 /*
  * configure a sync endpoint
  */
-static int sync_ep_set_params(struct snd_usb_endpoint *ep,
-			      struct audioformat *fmt)
+static int sync_ep_set_params(struct snd_usb_endpoint *ep)
 {
 	int i;
 
@@ -748,6 +757,8 @@ out_of_memory:
  * @pcm_format: the audio fomat.
  * @channels: the number of audio channels.
  * @period_bytes: the number of bytes in one alsa period.
+ * @period_frames: the number of frames in one alsa period.
+ * @buffer_periods: the number of periods in one alsa buffer.
  * @rate: the frame rate.
  * @fmt: the USB audio format information
  * @sync_ep: the sync endpoint to use, if any
@@ -760,6 +771,8 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 				snd_pcm_format_t pcm_format,
 				unsigned int channels,
 				unsigned int period_bytes,
+				unsigned int period_frames,
+				unsigned int buffer_periods,
 				unsigned int rate,
 				struct audioformat *fmt,
 				struct snd_usb_endpoint *sync_ep)
@@ -793,10 +806,11 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 	switch (ep->type) {
 	case  SND_USB_ENDPOINT_TYPE_DATA:
 		err = data_ep_set_params(ep, pcm_format, channels,
-					 period_bytes, fmt, sync_ep);
+					 period_bytes, period_frames,
+					 buffer_periods, fmt, sync_ep);
 		break;
 	case  SND_USB_ENDPOINT_TYPE_SYNC:
-		err = sync_ep_set_params(ep, fmt);
+		err = sync_ep_set_params(ep);
 		break;
 	default:
 		err = -EINVAL;
@@ -931,28 +945,21 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
  *
  * @ep: the endpoint to deactivate
  *
- * If the endpoint is not currently in use, this functions will select the
- * alternate interface setting 0 for the interface of this endpoint.
+ * If the endpoint is not currently in use, this functions will
+ * deactivate its associated URBs.
  *
  * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
  */
-int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
+void snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 {
 	if (!ep)
-		return -EINVAL;
-
-	deactivate_urbs(ep, true);
-	wait_clear_urbs(ep);
+		return;
 
 	if (ep->use_count != 0)
-		return 0;
-
-	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
+		return;
 
-	return 0;
+	deactivate_urbs(ep, true);
+	wait_clear_urbs(ep);
 }
 
 /**