Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

1 files changed, 10 insertions, 14 deletions

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index c4118120268..d6e2bb49c59 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -141,7 +141,7 @@ int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep)
  *
  * For implicit feedback, next_packet_size() is unused.
  */
-static int next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
 {
 	unsigned long flags;
 	int ret;
@@ -177,15 +177,6 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep,
 		ep->retire_data_urb(ep->data_subs, urb);
 }
 
-static void prepare_outbound_urb_sizes(struct snd_usb_endpoint *ep,
-				       struct snd_urb_ctx *ctx)
-{
-	int i;
-
-	for (i = 0; i < ctx->packets; ++i)
-		ctx->packet_size[i] = next_packet_size(ep);
-}
-
 /*
  * Prepare a PLAYBACK urb for submission to the bus.
  */
@@ -370,7 +361,6 @@ static void snd_complete_urb(struct urb *urb)
 			goto exit_clear;
 		}
 
-		prepare_outbound_urb_sizes(ep, ctx);
 		prepare_outbound_urb(ep, ctx);
 	} else {
 		retire_inbound_urb(ep, ctx);
@@ -799,7 +789,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 /**
  * snd_usb_endpoint_start: start an snd_usb_endpoint
  *
- * @ep: the endpoint to start
+ * @ep:		the endpoint to start
+ * @can_sleep:	flag indicating whether the operation is executed in
+ * 		non-atomic context
  *
  * A call to this function will increment the use count of the endpoint.
  * In case it is not already running, the URBs for this endpoint will be
@@ -809,7 +801,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
  *
  * Returns an error if the URB submission failed, 0 in all other cases.
  */
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep)
 {
 	int err;
 	unsigned int i;
@@ -821,6 +813,11 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (++ep->use_count != 1)
 		return 0;
 
+	/* just to be sure */
+	deactivate_urbs(ep, 0, can_sleep);
+	if (can_sleep)
+		wait_clear_urbs(ep);
+
 	ep->active_mask = 0;
 	ep->unlink_mask = 0;
 	ep->phase = 0;
@@ -850,7 +847,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 			goto __error;
 
 		if (usb_pipeout(ep->pipe)) {
-			prepare_outbound_urb_sizes(ep, urb->context);
 			prepare_outbound_urb(ep, urb->context);
 		} else {
 			prepare_inbound_urb(ep, urb->context);