summaryrefslogtreecommitdiffstats
path: root/sound/usb/endpoint.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-09 07:07:14 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-09 07:07:14 +0900
commitf5a246eab9a268f51ba8189ea5b098a1bfff200e (patch)
treea6ff7169e0bcaca498d9aec8b0624de1b74eaecb /sound/usb/endpoint.c
parentd5bbd43d5f450c3fca058f5b85f3dfb4e8cc88c9 (diff)
parent7ff34ad80b7080fafaac8efa9ef0061708eddd51 (diff)
Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
Diffstat (limited to 'sound/usb/endpoint.c')
-rw-r--r--sound/usb/endpoint.c39
1 files changed, 26 insertions, 13 deletions
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 060dccb9ec7..7f78c6d782b 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -31,6 +31,7 @@
#include "card.h"
#include "endpoint.h"
#include "pcm.h"
+#include "quirks.h"
#define EP_FLAG_ACTIVATED 0
#define EP_FLAG_RUNNING 1
@@ -170,6 +171,11 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep,
{
struct urb *urb = urb_ctx->urb;
+ if (unlikely(ep->skip_packets > 0)) {
+ ep->skip_packets--;
+ return;
+ }
+
if (ep->sync_slave)
snd_usb_handle_sync_urb(ep->sync_slave, ep, urb);
@@ -567,20 +573,19 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force)
* configure a data endpoint
*/
static int data_ep_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels,
+ unsigned int period_bytes,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep)
{
unsigned int maxsize, i, urb_packs, total_packs, packs_per_ms;
- int period_bytes = params_period_bytes(hw_params);
- int format = params_format(hw_params);
int is_playback = usb_pipeout(ep->pipe);
- int frame_bits = snd_pcm_format_physical_width(params_format(hw_params)) *
- params_channels(hw_params);
+ int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
ep->datainterval = fmt->datainterval;
ep->stride = frame_bits >> 3;
- ep->silence_value = format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
+ ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
/* calculate max. frequency */
if (ep->maxpacksize) {
@@ -693,7 +698,6 @@ out_of_memory:
* configure a sync endpoint
*/
static int sync_ep_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
struct audioformat *fmt)
{
int i;
@@ -736,7 +740,10 @@ out_of_memory:
* snd_usb_endpoint_set_params: configure an snd_usb_endpoint
*
* @ep: the snd_usb_endpoint to configure
- * @hw_params: the hardware parameters
+ * @pcm_format: the audio fomat.
+ * @channels: the number of audio channels.
+ * @period_bytes: the number of bytes in one alsa period.
+ * @rate: the frame rate.
* @fmt: the USB audio format information
* @sync_ep: the sync endpoint to use, if any
*
@@ -745,7 +752,10 @@ out_of_memory:
* An endpoint that is already running can not be reconfigured.
*/
int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels,
+ unsigned int period_bytes,
+ unsigned int rate,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep)
{
@@ -765,9 +775,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
- ep->freqn = get_usb_full_speed_rate(params_rate(hw_params));
+ ep->freqn = get_usb_full_speed_rate(rate);
else
- ep->freqn = get_usb_high_speed_rate(params_rate(hw_params));
+ ep->freqn = get_usb_high_speed_rate(rate);
/* calculate the frequency in 16.16 format */
ep->freqm = ep->freqn;
@@ -777,10 +787,11 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
switch (ep->type) {
case SND_USB_ENDPOINT_TYPE_DATA:
- err = data_ep_set_params(ep, hw_params, fmt, sync_ep);
+ err = data_ep_set_params(ep, pcm_format, channels,
+ period_bytes, fmt, sync_ep);
break;
case SND_USB_ENDPOINT_TYPE_SYNC:
- err = sync_ep_set_params(ep, hw_params, fmt);
+ err = sync_ep_set_params(ep, fmt);
break;
default:
err = -EINVAL;
@@ -828,6 +839,8 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep)
ep->unlink_mask = 0;
ep->phase = 0;
+ snd_usb_endpoint_start_quirk(ep);
+
/*
* If this endpoint has a data endpoint as implicit feedback source,
* don't start the urbs here. Instead, mark them all as available,