Merge remote-tracking branch 'origin' into irqdomain/next

4 files changed, 147 insertions, 148 deletions

diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 64aed432ae2..7da0d0aa72c 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -485,7 +485,7 @@ static int __devinit snd_probe(struct usb_interface *intf,
 		     const struct usb_device_id *id)
 {
 	int ret;
-	struct snd_card *card;
+	struct snd_card *card = NULL;
 	struct usb_device *device = interface_to_usbdev(intf);
 
 	ret = create_card(device, intf, &card);
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index e6906901deb..0f647d22cb4 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -414,7 +414,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 {
 	struct list_head *p;
 	struct snd_usb_endpoint *ep;
-	int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+	int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
 
 	mutex_lock(&chip->mutex);
 
@@ -434,16 +434,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
 		    type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
 		    ep_num);
 
-	/* select the alt setting once so the endpoints become valid */
-	ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
-				alts->desc.bAlternateSetting);
-	if (ret < 0) {
-		snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-					__func__, ret);
-		ep = NULL;
-		goto __exit_unlock;
-	}
-
 	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
 	if (!ep)
 		goto __exit_unlock;
@@ -831,9 +821,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (++ep->use_count != 1)
 		return 0;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return -EINVAL;
-
 	/* just to be sure */
 	deactivate_urbs(ep, 0, 1);
 	wait_clear_urbs(ep);
@@ -911,9 +898,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 	if (snd_BUG_ON(ep->use_count == 0))
 		return;
 
-	if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
-		return;
-
 	if (--ep->use_count == 0) {
 		deactivate_urbs(ep, force, can_sleep);
 		ep->data_subs = NULL;
@@ -927,42 +911,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
 }
 
 /**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
-	if (ep->use_count != 0)
-		return 0;
-
-	if (!ep->chip->shutdown &&
-	    !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
-			return ret;
-		}
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-
-/**
  * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
  *
  * @ep: the endpoint to deactivate
@@ -980,24 +928,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep)
 	if (!ep)
 		return -EINVAL;
 
+	deactivate_urbs(ep, 1, 1);
+	wait_clear_urbs(ep);
+
 	if (ep->use_count != 0)
 		return 0;
 
-	if (!ep->chip->shutdown &&
-	    test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
-		int ret;
-
-		ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
-		if (ret < 0) {
-			snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
-						__func__, ret);
-			return ret;
-		}
+	clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
 
-		return 0;
-	}
-
-	return -EBUSY;
+	return 0;
 }
 
 /**
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 41f4b691192..690000db0ec 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -42,6 +42,13 @@
 
 extern struct snd_kcontrol_new *snd_usb_feature_unit_ctl;
 
+struct std_mono_table {
+	unsigned int unitid, control, cmask;
+	int val_type;
+	const char *name;
+	snd_kcontrol_tlv_rw_t *tlv_callback;
+};
+
 /* private_free callback */
 static void usb_mixer_elem_free(struct snd_kcontrol *kctl)
 {
@@ -114,6 +121,25 @@ static int snd_create_std_mono_ctl(struct usb_mixer_interface *mixer,
 }
 
 /*
+ * Create a set of standard UAC controls from a table
+ */
+static int snd_create_std_mono_table(struct usb_mixer_interface *mixer,
+				struct std_mono_table *t)
+{
+	int err;
+
+	while (t->name != NULL) {
+		err = snd_create_std_mono_ctl(mixer, t->unitid, t->control,
+				t->cmask, t->val_type, t->name, t->tlv_callback);
+		if (err < 0)
+			return err;
+		t++;
+	}
+
+	return 0;
+}
+
+/*
  * Sound Blaster remote control configuration
  *
  * format of remote control data:
@@ -916,61 +942,6 @@ static int snd_ftu_create_mixer(struct usb_mixer_interface *mixer)
 	return 0;
 }
 
-
-/*
- * Create mixer for Electrix Ebox-44
- *
- * The mixer units from this device are corrupt, and even where they
- * are valid they presents mono controls as L and R channels of
- * stereo. So we create a good mixer in code.
- */
-
-static int snd_ebox44_create_mixer(struct usb_mixer_interface *mixer)
-{
-	int err;
-
-	err = snd_create_std_mono_ctl(mixer, 4, 1, 0x0, USB_MIXER_INV_BOOLEAN,
-				"Headphone Playback Switch", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 4, 2, 0x1, USB_MIXER_S16,
-				"Headphone A Mix Playback Volume", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 4, 2, 0x2, USB_MIXER_S16,
-				"Headphone B Mix Playback Volume", NULL);
-	if (err < 0)
-		return err;
-
-	err = snd_create_std_mono_ctl(mixer, 7, 1, 0x0, USB_MIXER_INV_BOOLEAN,
-				"Output Playback Switch", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 7, 2, 0x1, USB_MIXER_S16,
-				"Output A Playback Volume", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 7, 2, 0x2, USB_MIXER_S16,
-				"Output B Playback Volume", NULL);
-	if (err < 0)
-		return err;
-
-	err = snd_create_std_mono_ctl(mixer, 10, 1, 0x0, USB_MIXER_INV_BOOLEAN,
-				"Input Capture Switch", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 10, 2, 0x1, USB_MIXER_S16,
-				"Input A Capture Volume", NULL);
-	if (err < 0)
-		return err;
-	err = snd_create_std_mono_ctl(mixer, 10, 2, 0x2, USB_MIXER_S16,
-				"Input B Capture Volume", NULL);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
 void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
 			       unsigned char samplerate_id)
 {
@@ -990,6 +961,81 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
 	}
 }
 
+/*
+ * The mixer units for Ebox-44 are corrupt, and even where they
+ * are valid they presents mono controls as L and R channels of
+ * stereo. So we provide a good mixer here.
+ */
+struct std_mono_table ebox44_table[] = {
+	{
+		.unitid = 4,
+		.control = 1,
+		.cmask = 0x0,
+		.val_type = USB_MIXER_INV_BOOLEAN,
+		.name = "Headphone Playback Switch"
+	},
+	{
+		.unitid = 4,
+		.control = 2,
+		.cmask = 0x1,
+		.val_type = USB_MIXER_S16,
+		.name = "Headphone A Mix Playback Volume"
+	},
+	{
+		.unitid = 4,
+		.control = 2,
+		.cmask = 0x2,
+		.val_type = USB_MIXER_S16,
+		.name = "Headphone B Mix Playback Volume"
+	},
+
+	{
+		.unitid = 7,
+		.control = 1,
+		.cmask = 0x0,
+		.val_type = USB_MIXER_INV_BOOLEAN,
+		.name = "Output Playback Switch"
+	},
+	{
+		.unitid = 7,
+		.control = 2,
+		.cmask = 0x1,
+		.val_type = USB_MIXER_S16,
+		.name = "Output A Playback Volume"
+	},
+	{
+		.unitid = 7,
+		.control = 2,
+		.cmask = 0x2,
+		.val_type = USB_MIXER_S16,
+		.name = "Output B Playback Volume"
+	},
+
+	{
+		.unitid = 10,
+		.control = 1,
+		.cmask = 0x0,
+		.val_type = USB_MIXER_INV_BOOLEAN,
+		.name = "Input Capture Switch"
+	},
+	{
+		.unitid = 10,
+		.control = 2,
+		.cmask = 0x1,
+		.val_type = USB_MIXER_S16,
+		.name = "Input A Capture Volume"
+	},
+	{
+		.unitid = 10,
+		.control = 2,
+		.cmask = 0x2,
+		.val_type = USB_MIXER_S16,
+		.name = "Input B Capture Volume"
+	},
+
+	{}
+};
+
 int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 {
 	int err = 0;
@@ -1035,7 +1081,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 		break;
 
 	case USB_ID(0x200c, 0x1018): /* Electrix Ebox-44 */
-		err = snd_ebox44_create_mixer(mixer);
+		/* detection is disabled in mixer_maps.c */
+		err = snd_create_std_mono_table(mixer, ebox44_table);
 		break;
 	}
 
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 54607f8c4f6..a1298f37942 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -261,19 +261,6 @@ static void stop_endpoints(struct snd_usb_substream *subs,
 				      force, can_sleep, wait);
 }
 
-static int activate_endpoints(struct snd_usb_substream *subs)
-{
-	if (subs->sync_endpoint) {
-		int ret;
-
-		ret = snd_usb_endpoint_activate(subs->sync_endpoint);
-		if (ret < 0)
-			return ret;
-	}
-
-	return snd_usb_endpoint_activate(subs->data_endpoint);
-}
-
 static int deactivate_endpoints(struct snd_usb_substream *subs)
 {
 	int reta, retb;
@@ -314,6 +301,33 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
 	if (fmt == subs->cur_audiofmt)
 		return 0;
 
+	/* close the old interface */
+	if (subs->interface >= 0 && subs->interface != fmt->iface) {
+		err = usb_set_interface(subs->dev, subs->interface, 0);
+		if (err < 0) {
+			snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
+				dev->devnum, fmt->iface, fmt->altsetting, err);
+			return -EIO;
+		}
+		subs->interface = -1;
+		subs->altset_idx = 0;
+	}
+
+	/* set interface */
+	if (subs->interface != fmt->iface ||
+	    subs->altset_idx != fmt->altset_idx) {
+		err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
+		if (err < 0) {
+			snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
+				   dev->devnum, fmt->iface, fmt->altsetting, err);
+			return -EIO;
+		}
+		snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
+				fmt->iface, fmt->altsetting);
+		subs->interface = fmt->iface;
+		subs->altset_idx = fmt->altset_idx;
+	}
+
 	subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip,
 						   alts, fmt->endpoint, subs->direction,
 						   SND_USB_ENDPOINT_TYPE_DATA);
@@ -387,7 +401,7 @@ add_sync_ep:
 		subs->data_endpoint->sync_master = subs->sync_endpoint;
 	}
 
-	if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0)
+	if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0)
 		return err;
 
 	subs->cur_audiofmt = fmt;
@@ -450,7 +464,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
 		struct usb_interface *iface;
 		iface = usb_ifnum_to_if(subs->dev, fmt->iface);
 		alts = &iface->altsetting[fmt->altset_idx];
-		ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate);
+		ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate);
 		if (ret < 0)
 			return ret;
 		subs->cur_rate = rate;
@@ -460,12 +474,6 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
 		mutex_lock(&subs->stream->chip->shutdown_mutex);
 		/* format changed */
 		stop_endpoints(subs, 0, 0, 0);
-		deactivate_endpoints(subs);
-
-		ret = activate_endpoints(subs);
-		if (ret < 0)
-			goto unlock;
-
 		ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
 						  subs->sync_endpoint);
 		if (ret < 0)
@@ -500,6 +508,7 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream)
 	subs->period_bytes = 0;
 	mutex_lock(&subs->stream->chip->shutdown_mutex);
 	stop_endpoints(subs, 0, 1, 1);
+	deactivate_endpoints(subs);
 	mutex_unlock(&subs->stream->chip->shutdown_mutex);
 	return snd_pcm_lib_free_vmalloc_buffer(substream);
 }
@@ -938,16 +947,20 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction)
 
 static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction)
 {
-	int ret;
 	struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
 	struct snd_usb_substream *subs = &as->substream[direction];
 
 	stop_endpoints(subs, 0, 0, 0);
-	ret = deactivate_endpoints(subs);
+
+	if (!as->chip->shutdown && subs->interface >= 0) {
+		usb_set_interface(subs->dev, subs->interface, 0);
+		subs->interface = -1;
+	}
+
 	subs->pcm_substream = NULL;
 	snd_usb_autosuspend(subs->stream->chip);
 
-	return ret;
+	return 0;
 }
 
 /* Since a URB can handle only a single linear buffer, we must use double