ALSA: hda - Enable sync_write workaround for AMD generically

The workaround for AMD chipset via sync_write flag seems needed for
machines with Realtek codecs.  So, it's better to activate it
generically in hda_intel.c from the beginning.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

2 files changed, 11 insertions, 16 deletions

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 6f891ee82a7..f95ff6e029a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1447,6 +1447,17 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model)
 		}
 	}
 
+	/* AMD chipsets often cause the communication stalls upon certain
+	 * sequence like the pin-detection.  It seems that forcing the synced
+	 * access works around the stall.  Grrr...
+	 */
+	if (chip->pci->vendor == PCI_VENDOR_ID_AMD ||
+	    chip->pci->vendor == PCI_VENDOR_ID_ATI) {
+		snd_printk(KERN_INFO SFX "Enable sync_write for AMD chipset\n");
+		chip->bus->sync_write = 1;
+		chip->bus->allow_bus_reset = 1;
+	}
+
 	/* Then create codec instances */
 	for (c = 0; c < max_slots; c++) {
 		if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 75b7155b164..6c5af3e77d8 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -5449,13 +5449,6 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 	spec->multiout.dac_nids = spec->dac_nids;
 	spec->init = stac92hd83xxx_core_init;
 
-	if (codec->bus->pci && codec->bus->pci->vendor == PCI_VENDOR_ID_AMD) {
-		snd_printk(KERN_INFO "idt92hd83xxx: "
-			   "Enable sync_write for AMD chipset\n");
-		codec->bus->sync_write = 1;
-		codec->bus->allow_bus_reset = 1;
-	}
-
 	spec->board_config = snd_hda_check_board_config(codec,
 							STAC_92HD83XXX_MODELS,
 							stac92hd83xxx_models,
@@ -5736,15 +5729,6 @@ again:
 	if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
 		snd_hda_sequence_write_cache(codec, unmute_init);
 
-	/* Some HP machines seem to have unstable codec communications
-	 * especially with ATI fglrx driver.  For recovering from the
-	 * CORB/RIRB stall, allow the BUS reset and keep always sync
-	 */
-	if (spec->board_config == STAC_HP_DV5) {
-		codec->bus->sync_write = 1;
-		codec->bus->allow_bus_reset = 1;
-	}
-
 	spec->aloopback_ctl = stac92hd71bxx_loopback;
 	spec->aloopback_mask = 0x50;
 	spec->aloopback_shift = 0;