diff options
| -rw-r--r-- | drivers/platform/x86/intel_mid_thermal.c | 606 |
1 files changed, 300 insertions, 306 deletions
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index c2f4bd8013b..f0776504521 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -37,49 +37,50 @@ #include <asm/intel_scu_ipc.h> /* Number of thermal sensors */ -#define MSIC_THERMAL_SENSORS 4 +#define MSIC_THERMAL_SENSORS 4 /* ADC1 - thermal registers */ -#define MSIC_THERM_ADC1CNTL1 0x1C0 -#define MSIC_ADC_ENBL 0x10 -#define MSIC_ADC_START 0x08 +#define MSIC_THERM_ADC1CNTL1 0x1C0 +#define MSIC_ADC_ENBL 0x10 +#define MSIC_ADC_START 0x08 -#define MSIC_THERM_ADC1CNTL3 0x1C2 -#define MSIC_ADCTHERM_ENBL 0x04 -#define MSIC_ADCRRDATA_ENBL 0x05 -#define MSIC_CHANL_MASK_VAL 0x0F +#define MSIC_THERM_ADC1CNTL3 0x1C2 +#define MSIC_ADCTHERM_ENBL 0x04 +#define MSIC_ADCRRDATA_ENBL 0x05 +#define MSIC_CHANL_MASK_VAL 0x0F -#define MSIC_STOPBIT_MASK 16 -#define MSIC_ADCTHERM_MASK 4 -#define ADC_CHANLS_MAX 15 /* Number of ADC channels */ -#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS) +#define MSIC_STOPBIT_MASK 16 +#define MSIC_ADCTHERM_MASK 4 +/* Number of ADC channels */ +#define ADC_CHANLS_MAX 15 +#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS) /* ADC channel code values */ -#define SKIN_SENSOR0_CODE 0x08 -#define SKIN_SENSOR1_CODE 0x09 -#define SYS_SENSOR_CODE 0x0A -#define MSIC_DIE_SENSOR_CODE 0x03 +#define SKIN_SENSOR0_CODE 0x08 +#define SKIN_SENSOR1_CODE 0x09 +#define SYS_SENSOR_CODE 0x0A +#define MSIC_DIE_SENSOR_CODE 0x03 -#define SKIN_THERM_SENSOR0 0 -#define SKIN_THERM_SENSOR1 1 -#define SYS_THERM_SENSOR2 2 -#define MSIC_DIE_THERM_SENSOR3 3 +#define SKIN_THERM_SENSOR0 0 +#define SKIN_THERM_SENSOR1 1 +#define SYS_THERM_SENSOR2 2 +#define MSIC_DIE_THERM_SENSOR3 3 /* ADC code range */ -#define ADC_MAX 977 -#define ADC_MIN 162 -#define ADC_VAL0C 887 -#define ADC_VAL20C 720 -#define ADC_VAL40C 508 -#define ADC_VAL60C 315 +#define ADC_MAX 977 +#define ADC_MIN 162 +#define ADC_VAL0C 887 +#define ADC_VAL20C 720 +#define ADC_VAL40C 508 +#define ADC_VAL60C 315 /* ADC base addresses */ -#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ -#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ +#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ +#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ /* MSIC die attributes */ -#define MSIC_DIE_ADC_MIN 488 -#define MSIC_DIE_ADC_MAX 1004 +#define MSIC_DIE_ADC_MIN 488 +#define MSIC_DIE_ADC_MAX 1004 /* This holds the address of the first free ADC channel, * among the 15 channels @@ -87,15 +88,15 @@ static int channel_index; struct platform_info { - struct platform_device *pdev; - struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS]; + struct platform_device *pdev; + struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS]; }; struct thermal_device_info { - unsigned int chnl_addr; - int direct; - /* This holds the current temperature in millidegree celsius */ - long curr_temp; + unsigned int chnl_addr; + int direct; + /* This holds the current temperature in millidegree celsius */ + long curr_temp; }; /** @@ -106,7 +107,7 @@ struct thermal_device_info { */ static int to_msic_die_temp(uint16_t adc_val) { - return (368 * (adc_val) / 1000) - 220; + return (368 * (adc_val) / 1000) - 220; } /** @@ -118,7 +119,7 @@ static int to_msic_die_temp(uint16_t adc_val) */ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max) { - return (adc_val >= min) && (adc_val <= max); + return (adc_val >= min) && (adc_val <= max); } /** @@ -136,35 +137,35 @@ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max) */ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp) { - int temp; - - /* Direct conversion for die temperature */ - if (direct) { - if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) { - *tp = to_msic_die_temp(adc_val) * 1000; - return 0; - } - return -ERANGE; - } - - if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX)) - return -ERANGE; - - /* Linear approximation for skin temperature */ - if (adc_val > ADC_VAL0C) - temp = 177 - (adc_val/5); - else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C)) - temp = 111 - (adc_val/8); - else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C)) - temp = 92 - (adc_val/10); - else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C)) - temp = 91 - (adc_val/10); - else - temp = 112 - (adc_val/6); - - /* Convert temperature in celsius to milli degree celsius */ - *tp = temp * 1000; - return 0; + int temp; + + /* Direct conversion for die temperature */ + if (direct) { + if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) { + *tp = to_msic_die_temp(adc_val) * 1000; + return 0; + } + return -ERANGE; + } + + if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX)) + return -ERANGE; + + /* Linear approximation for skin temperature */ + if (adc_val > ADC_VAL0C) + temp = 177 - (adc_val/5); + else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C)) + temp = 111 - (adc_val/8); + else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C)) + temp = 92 - (adc_val/10); + else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C)) + temp = 91 - (adc_val/10); + else + temp = 112 - (adc_val/6); + + /* Convert temperature in celsius to milli degree celsius */ + *tp = temp * 1000; + return 0; } /** @@ -178,47 +179,47 @@ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp) */ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) { - struct thermal_device_info *td_info = tzd->devdata; - uint16_t adc_val, addr; - uint8_t data = 0; - int ret; - unsigned long curr_temp; - - - addr = td_info->chnl_addr; - - /* Enable the msic for conversion before reading */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); - if (ret) - return ret; - - /* Re-toggle the RRDATARD bit (temporary workaround) */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); - if (ret) - return ret; - - /* Read the higher bits of data */ - ret = intel_scu_ipc_ioread8(addr, &data); - if (ret) - return ret; - - /* Shift bits to accommodate the lower two data bits */ - adc_val = (data << 2); - addr++; - - ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ - if (ret) - return ret; - - /* Adding lower two bits to the higher bits */ - data &= 03; - adc_val += data; - - /* Convert ADC value to temperature */ - ret = adc_to_temp(td_info->direct, adc_val, &curr_temp); - if (ret == 0) - *temp = td_info->curr_temp = curr_temp; - return ret; + struct thermal_device_info *td_info = tzd->devdata; + uint16_t adc_val, addr; + uint8_t data = 0; + int ret; + unsigned long curr_temp; + + + addr = td_info->chnl_addr; + + /* Enable the msic for conversion before reading */ + ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); + if (ret) + return ret; + + /* Re-toggle the RRDATARD bit (temporary workaround) */ + ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); + if (ret) + return ret; + + /* Read the higher bits of data */ + ret = intel_scu_ipc_ioread8(addr, &data); + if (ret) + return ret; + + /* Shift bits to accommodate the lower two data bits */ + adc_val = (data << 2); + addr++; + + ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ + if (ret) + return ret; + + /* Adding lower two bits to the higher bits */ + data &= 03; + adc_val += data; + + /* Convert ADC value to temperature */ + ret = adc_to_temp(td_info->direct, adc_val, &curr_temp); + if (ret == 0) + *temp = td_info->curr_temp = curr_temp; + return ret; } /** @@ -231,22 +232,21 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) */ static int configure_adc(int val) { - int ret; - uint8_t data; - - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); - if (ret) - return ret; - - if (val) { - /* Enable and start the ADC */ - data |= (MSIC_ADC_ENBL | MSIC_ADC_START); - } else { - /* Just stop the ADC */ - data &= (~MSIC_ADC_START); - } - - return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); + int ret; + uint8_t data; + + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + if (ret) + return ret; + + if (val) { + /* Enable and start the ADC */ + data |= (MSIC_ADC_ENBL | MSIC_ADC_START); + } else { + /* Just stop the ADC */ + data &= (~MSIC_ADC_START); + } + return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); } /** @@ -259,30 +259,30 @@ static int configure_adc(int val) */ static int set_up_therm_channel(u16 base_addr) { - int ret; - - /* Enable all the sensor channels */ - ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); - if (ret) - return ret; - - ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); - if (ret) - return ret; - - ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); - if (ret) - return ret; - - /* Since this is the last channel, set the stop bit - to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ - ret = intel_scu_ipc_iowrite8(base_addr + 3, - (MSIC_DIE_SENSOR_CODE | 0x10)); - if (ret) - return ret; - - /* Enable ADC and start it */ - return configure_adc(1); + int ret; + + /* Enable all the sensor channels */ + ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); + if (ret) + return ret; + + ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); + if (ret) + return ret; + + ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); + if (ret) + return ret; + + /* Since this is the last channel, set the stop bit + * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ + ret = intel_scu_ipc_iowrite8(base_addr + 3, + (MSIC_DIE_SENSOR_CODE | 0x10)); + if (ret) + return ret; + + /* Enable ADC and start it */ + return configure_adc(1); } /** @@ -293,13 +293,13 @@ static int set_up_therm_channel(u16 base_addr) */ static int reset_stopbit(uint16_t addr) { - int ret; - uint8_t data; - ret = intel_scu_ipc_ioread8(addr, &data); - if (ret) - return ret; - /* Set the stop bit to zero */ - return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); + int ret; + uint8_t data; + ret = intel_scu_ipc_ioread8(addr, &data); + if (ret) + return ret; + /* Set the stop bit to zero */ + return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); } /** @@ -317,30 +317,30 @@ static int reset_stopbit(uint16_t addr) */ static int find_free_channel(void) { - int ret; - int i; - uint8_t data; - - /* check whether ADC is enabled */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); - if (ret) - return ret; - - if ((data & MSIC_ADC_ENBL) == 0) - return 0; - - /* ADC is already enabled; Looking for an empty channel */ - for (i = 0; i < ADC_CHANLS_MAX; i++) { - ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); - if (ret) - return ret; - - if (data & MSIC_STOPBIT_MASK) { - ret = i; - break; - } - } - return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret; + int ret; + int i; + uint8_t data; + + /* check whether ADC is enabled */ + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + if (ret) + return ret; + + if ((data & MSIC_ADC_ENBL) == 0) + return 0; + + /* ADC is already enabled; Looking for an empty channel */ + for (i = 0; i < ADC_CHANLS_MAX; i++) { + ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); + if (ret) + return ret; + + if (data & MSIC_STOPBIT_MASK) { + ret = i; + break; + } + } + return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret; } /** @@ -351,48 +351,48 @@ static int find_free_channel(void) */ static int mid_initialize_adc(struct device *dev) { - u8 data; - u16 base_addr; - int ret; - - /* - * Ensure that adctherm is disabled before we - * initialize the ADC - */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); - if (ret) - return ret; - - if (data & MSIC_ADCTHERM_MASK) - dev_warn(dev, "ADCTHERM already set"); - - /* Index of the first channel in which the stop bit is set */ - channel_index = find_free_channel(); - if (channel_index < 0) { - dev_err(dev, "No free ADC channels"); - return channel_index; - } - - base_addr = ADC_CHNL_START_ADDR + channel_index; - - if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) { - /* Reset stop bit for channels other than 0 and 12 */ - ret = reset_stopbit(base_addr); - if (ret) - return ret; - - /* Index of the first free channel */ - base_addr++; - channel_index++; - } - - ret = set_up_therm_channel(base_addr); - if (ret) { - dev_err(dev, "unable to enable ADC"); - return ret; - } - dev_dbg(dev, "ADC initialization successful"); - return ret; + u8 data; + u16 base_addr; + int ret; + + /* + * Ensure that adctherm is disabled before we + * initialize the ADC + */ + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); + if (ret) + return ret; + + if (data & MSIC_ADCTHERM_MASK) + dev_warn(dev, "ADCTHERM already set"); + + /* Index of the first channel in which the stop bit is set */ + channel_index = find_free_channel(); + if (channel_index < 0) { + dev_err(dev, "No free ADC channels"); + return channel_index; + } + + base_addr = ADC_CHNL_START_ADDR + channel_index; + + if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) { + /* Reset stop bit for channels other than 0 and 12 */ + ret = reset_stopbit(base_addr); + if (ret) + return ret; + + /* Index of the first free channel */ + base_addr++; + channel_index++; + } + + ret = set_up_therm_channel(base_addr); + if (ret) { + dev_err(dev, "unable to enable ADC"); + return ret; + } + dev_dbg(dev, "ADC initialization successful"); + return ret; } /** @@ -403,18 +403,18 @@ static int mid_initialize_adc(struct device *dev) */ static struct thermal_device_info *initialize_sensor(int index) { - struct thermal_device_info *td_info = - kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL); - - if (!td_info) - return NULL; - - /* Set the base addr of the channel for this sensor */ - td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index); - /* Sensor 3 is direct conversion */ - if (index == 3) - td_info->direct = 1; - return td_info; + struct thermal_device_info *td_info = + kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL); + + if (!td_info) + return NULL; + + /* Set the base addr of the channel for this sensor */ + td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index); + /* Sensor 3 is direct conversion */ + if (index == 3) + td_info->direct = 1; + return td_info; } /** @@ -425,7 +425,7 @@ static struct thermal_device_info *initialize_sensor(int index) */ static int mid_thermal_resume(struct platform_device *pdev) { - return mid_initialize_adc(&pdev->dev); + return mid_initialize_adc(&pdev->dev); } /** @@ -437,12 +437,12 @@ static int mid_thermal_resume(struct platform_device *pdev) */ static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg) { - /* - * This just stops the ADC and does not disable it. - * temporary workaround until we have a generic ADC driver. - * If 0 is passed, it disables the ADC. - */ - return configure_adc(0); + /* + * This just stops the ADC and does not disable it. + * temporary workaround until we have a generic ADC driver. + * If 0 is passed, it disables the ADC. + */ + return configure_adc(0); } /** @@ -453,16 +453,15 @@ static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg) */ static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp) { - WARN_ON(tzd == NULL); - return mid_read_temp(tzd, temp); + WARN_ON(tzd == NULL); + return mid_read_temp(tzd, temp); } /* Can't be const */ static struct thermal_zone_device_ops tzd_ops = { - .get_temp = read_curr_temp, + .get_temp = read_curr_temp, }; - /** * mid_thermal_probe - mfld thermal initialize * @pdev: platform device structure @@ -472,46 +471,45 @@ static struct thermal_zone_device_ops tzd_ops = { */ static int mid_thermal_probe(struct platform_device *pdev) { - static char *name[MSIC_THERMAL_SENSORS] = { - "skin0", "skin1", "sys", "msicdie" - }; - - int ret; - int i; - struct platform_info *pinfo; - - pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - /* Initializing the hardware */ - ret = mid_initialize_adc(&pdev->dev); - if (ret) { - dev_err(&pdev->dev, "ADC init failed"); - kfree(pinfo); - return ret; - } - - /* Register each sensor with the generic thermal framework*/ - for (i = 0; i < MSIC_THERMAL_SENSORS; i++) { - pinfo->tzd[i] = thermal_zone_device_register(name[i], - 0, initialize_sensor(i), - &tzd_ops, 0, 0, 0, 0); - if (IS_ERR(pinfo->tzd[i])) - goto reg_fail; - } - - pinfo->pdev = pdev; - platform_set_drvdata(pdev, pinfo); - return 0; + static char *name[MSIC_THERMAL_SENSORS] = { + "skin0", "skin1", "sys", "msicdie" + }; + + int ret; + int i; + struct platform_info *pinfo; + + pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + /* Initializing the hardware */ + ret = mid_initialize_adc(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "ADC init failed"); + kfree(pinfo); + return ret; + } + + /* Register each sensor with the generic thermal framework*/ + for (i = 0; i < MSIC_THERMAL_SENSORS; i++) { + pinfo->tzd[i] = thermal_zone_device_register(name[i], + 0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0); + if (IS_ERR(pinfo->tzd[i])) + goto reg_fail; + } + + pinfo->pdev = pdev; + platform_set_drvdata(pdev, pinfo); + return 0; reg_fail: - ret = PTR_ERR(pinfo->tzd[i]); - while (--i >= 0) - thermal_zone_device_unregister(pinfo->tzd[i]); - configure_adc(0); - kfree(pinfo); - return ret; + ret = PTR_ERR(pinfo->tzd[i]); + while (--i >= 0) + thermal_zone_device_unregister(pinfo->tzd[i]); + configure_adc(0); + kfree(pinfo); + return ret; } /** @@ -523,49 +521,45 @@ reg_fail: */ static int mid_thermal_remove(struct platform_device *pdev) { - int i; - struct platform_info *pinfo = platform_get_drvdata(pdev); + int i; + struct platform_info *pinfo = platform_get_drvdata(pdev); - for (i = 0; i < MSIC_THERMAL_SENSORS; i++) - thermal_zone_device_unregister(pinfo->tzd[i]); + for (i = 0; i < MSIC_THERMAL_SENSORS; i++) + thermal_zone_device_unregister(pinfo->tzd[i]); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(pdev, NULL); - /* Stop the ADC */ - return configure_adc(0); + /* Stop the ADC */ + return configure_adc(0); } -/********************************************************************* - * Driver initialisation and finalization - *********************************************************************/ - #define DRIVER_NAME "msic_sensor" static const struct platform_device_id therm_id_table[] = { - { DRIVER_NAME, 1 }, - { } + { DRIVER_NAME, 1 }, + { } }; static struct platform_driver mid_thermal_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .probe = mid_thermal_probe, - .suspend = mid_thermal_suspend, - .resume = mid_thermal_resume, - .remove = __devexit_p(mid_thermal_remove), - .id_table = therm_id_table, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = mid_thermal_probe, + .suspend = mid_thermal_suspend, + .resume = mid_thermal_resume, + .remove = __devexit_p(mid_thermal_remove), + .id_table = therm_id_table, }; static int __init mid_thermal_module_init(void) { - return platform_driver_register(&mid_thermal_driver); + return platform_driver_register(&mid_thermal_driver); } static void __exit mid_thermal_module_exit(void) { - platform_driver_unregister(&mid_thermal_driver); + platform_driver_unregister(&mid_thermal_driver); } module_init(mid_thermal_module_init); |