diff options
| -rw-r--r-- | arch/arm/include/asm/mach/udc_pxa2xx.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/mioa701.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/z2.c | 26 | ||||
| -rw-r--r-- | arch/arm/plat-pxa/Makefile | 3 | ||||
| -rw-r--r-- | drivers/power/z2_battery.c | 12 |
5 files changed, 18 insertions, 29 deletions
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h index f3eabf1ecec..833306ee9e7 100644 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info { * here. Note that sometimes the signals go through inverters... */ bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ + int gpio_vbus; /* high == vbus present */ bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ + int gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d60db87dde0..fa6a708b409 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { }; /* Board I2C devices. */ -static struct i2c_board_info __initdata mioa701_i2c_devices[] = { +static struct i2c_board_info mioa701_i2c_devices[] = { { I2C_BOARD_INFO("mt9m111", 0x5d), }, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index f5d1ae3db3a..d303c6929d3 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -3,8 +3,9 @@ * * Support for the Zipit Z2 Handheld device. * - * Author: Ken McGuire - * Created: Jan 25, 2009 + * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> + * + * Based on research and code by: Ken McGuire * Based on mainstone.c as modified for the Zipit Z2. * * This program is free software; you can redistribute it and/or modify @@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = { { .name = "U-Boot Bootloader", .offset = 0x0, - .size = 0x20000, - }, - { - .name = "Linux Kernel", - .offset = 0x20000, - .size = 0x220000, - }, - { - .name = "Filesystem", - .offset = 0x240000, - .size = 0x5b0000, - }, - { + .size = 0x40000, + }, { .name = "U-Boot Environment", - .offset = 0x7f0000, + .offset = 0x40000, + .size = 0x60000, + }, { + .name = "Flash", + .offset = 0x60000, .size = MTDPART_SIZ_FULL, }, }; diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 6187edfbcb7..a17cc0c6a6b 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,8 +2,9 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o pmu.o +obj-y := dma.o +obj-$(CONFIG_ARCH_PXA) += pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index 9cca465436e..85064a9f649 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -9,19 +9,13 @@ * */ -#include <linux/init.h> -#include <linux/kernel.h> #include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/power_supply.h> -#include <linux/i2c.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <asm/irq.h> -#include <asm/mach/irq.h> +#include <linux/power_supply.h> +#include <linux/slab.h> #include <linux/z2_battery.h> #define Z2_DEFAULT_NAME "Z2" |