diff options
39 files changed, 1110 insertions, 80 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8..eddcbba87c6 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -110,6 +110,8 @@ CHECKFLAGS += -D__arm__ head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o textofs-y := 0x00008000 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 +# We don't want the htc bootloader to corrupt kernel during resume +textofs-$(CONFIG_PM_H1940) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 9e5e96f12d8..a4c0b3fcdbb 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -96,12 +96,19 @@ config PM_H1940 config MACH_N30 bool "Acer N30 family" select CPU_S3C2410 + select MACH_N35 select S3C_DEV_USB_HOST select S3C_DEV_NAND help Say Y here if you want suppt for the Acer N30, Acer N35, Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. +config MACH_N35 + bool + help + Internal node in order to enable support for Acer N35 if Acer N30 is + selected. + config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select CPU_S3C2410 @@ -111,6 +118,7 @@ config ARCH_BAST select MACH_BAST_IDE select S3C24XX_DCLK select ISA + select S3C_DEV_HWMON select S3C_DEV_USB_HOST select S3C_DEV_NAND help diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c2410/Makefile.boot index 7dab2a0325b..58c1dd7f8e1 100644 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ b/arch/arm/mach-s3c2410/Makefile.boot @@ -1,3 +1,7 @@ - zreladdr-y := 0x30008000 -params_phys-y := 0x30000100 - +ifeq ($(CONFIG_PM_H1940),y) + zreladdr-y := 0x30108000 + params_phys-y := 0x30100100 +else + zreladdr-y := 0x30008000 + params_phys-y := 0x30000100 +endif diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index b061ddcf306..c1f90f6fab4 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -633,7 +633,7 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_device_hwmon.dev.platform_data = &bast_hwmon_info; + s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 9531b4c41de..d2a2fad7db9 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -163,8 +163,8 @@ static struct s3c2410fb_display h1940_lcd __initdata = { .xres = 240, .yres = 320, .bpp = 16, - .left_margin = 20, - .right_margin = 8, + .left_margin = 8, + .right_margin = 20, .hsync_len = 4, .upper_margin = 8, .lower_margin = 7, @@ -272,7 +272,6 @@ static struct platform_device h1940_lcd_powerdev = { }; static struct platform_device *h1940_devices[] __initdata = { - &s3c_device_ts, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -286,6 +285,8 @@ static struct platform_device *h1940_devices[] __initdata = { &s3c_device_timer[0], &h1940_backlight, &h1940_lcd_powerdev, + &s3c_device_adc, + &s3c_device_ts, }; static void __init h1940_map_io(void) @@ -339,7 +340,7 @@ static void __init h1940_init(void) } MACHINE_START(H1940, "IPAQ-H1940") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 75a9fd37a46..41f299d983e 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -26,6 +26,7 @@ #include <linux/serial_core.h> #include <linux/timer.h> #include <linux/io.h> +#include <linux/mmc/host.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -46,6 +47,7 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/mci.h> #include <plat/s3c2410.h> #include <plat/udc.h> @@ -172,8 +174,10 @@ static struct gpio_keys_button n35_buttons[] = { { .gpio = S3C2410_GPF(0), .code = KEY_POWER, + .type = EV_PWR, .desc = "Power", .active_low = 0, + .wakeup = 1, }, { .gpio = S3C2410_GPG(9), @@ -264,6 +268,14 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .def_trigger = "", }; +/* This is the blue LED on the device. Originaly used to indicate GPS activity + * by flashing. */ +static struct s3c24xx_led_platdata n35_blue_led_pdata = { + .name = "blue_led", + .gpio = S3C2410_GPD(8), + .def_trigger = "", +}; + /* This LED is driven by the battery microcontroller, and is blinking * red, blinking green or solid green when the battery is low, * charging or full respectively. By driving GPD9 low, it's possible @@ -275,6 +287,13 @@ static struct s3c24xx_led_platdata n30_warning_led_pdata = { .def_trigger = "", }; +static struct s3c24xx_led_platdata n35_warning_led_pdata = { + .name = "warning_led", + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE, + .gpio = S3C2410_GPD(9), + .def_trigger = "", +}; + static struct platform_device n30_blue_led = { .name = "s3c24xx_led", .id = 1, @@ -283,6 +302,14 @@ static struct platform_device n30_blue_led = { }, }; +static struct platform_device n35_blue_led = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &n35_blue_led_pdata, + }, +}; + static struct platform_device n30_warning_led = { .name = "s3c24xx_led", .id = 2, @@ -291,6 +318,14 @@ static struct platform_device n30_warning_led = { }, }; +static struct platform_device n35_warning_led = { + .name = "s3c24xx_led", + .id = 2, + .dev = { + .platform_data = &n35_warning_led_pdata, + }, +}; + static struct s3c2410fb_display n30_display __initdata = { .type = S3C2410_LCDCON1_TFT, .width = 240, @@ -317,13 +352,36 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = { .lpcsel = 0x06, }; +static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd) +{ + switch (power_mode) { + case MMC_POWER_ON: + case MMC_POWER_UP: + gpio_set_value(S3C2410_GPG(4), 1); + break; + case MMC_POWER_OFF: + default: + gpio_set_value(S3C2410_GPG(4), 0); + break; + } +} + +static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = { + .gpio_detect = S3C2410_GPF(1), + .gpio_wprotect = S3C2410_GPG(10), + .ocr_avail = MMC_VDD_32_33, + .set_power = n30_sdi_set_power, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, &s3c_device_ohci, + &s3c_device_rtc, &s3c_device_usbgadget, + &s3c_device_sdi, &n30_button_device, &n30_blue_led, &n30_warning_led, @@ -334,8 +392,12 @@ static struct platform_device *n35_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_iis, + &s3c_device_rtc, &s3c_device_usbgadget, + &s3c_device_sdi, &n35_button_device, + &n35_blue_led, + &n35_warning_led, }; static struct s3c2410_platform_i2c __initdata n30_i2ccfg = { @@ -490,17 +552,15 @@ static void __init n30_map_io(void) s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); } -static void __init n30_init_irq(void) -{ - s3c24xx_init_irq(); -} - /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) { + WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power")); + s3c24xx_fb_set_platdata(&n30_fb_info); s3c24xx_udc_set_platdata(&n30_udc_cfg); + s3c24xx_mci_set_platdata(&n30_mci_cfg); s3c_i2c0_set_platdata(&n30_i2ccfg); /* Turn off suspend on both USB ports, and switch the @@ -532,7 +592,7 @@ static void __init n30_init(void) s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, - S3C2410_MISCCR_USBSUSPND1); + S3C2410_MISCCR_USBSUSPND0); platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } @@ -550,7 +610,7 @@ MACHINE_START(N30, "Acer-N30") .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, - .init_irq = n30_init_irq, + .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, MACHINE_END @@ -562,6 +622,6 @@ MACHINE_START(N35, "Acer-N35") .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, - .init_irq = n30_init_irq, + .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 966119c8efe..725636fc4dc 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -60,10 +60,10 @@ static void s3c2410_pm_prepare(void) __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM)); } - /* the RX3715 uses similar code and the same H1940 and the + /* RX3715 and RX1950 use similar to H1940 code and the * same offsets for resume and checksum pointers */ - if (machine_is_rx3715()) { + if (machine_is_rx3715() || machine_is_rx1950()) { void *base = phys_to_virt(H1940_SUSPEND_CHECK); unsigned long ptr; unsigned long calc = 0; @@ -79,6 +79,17 @@ static void s3c2410_pm_prepare(void) if ( machine_is_aml_m5900() ) s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + if (machine_is_rx1950()) { + /* According to S3C2442 user's manual, page 7-17, + * when the system is operating in NAND boot mode, + * the hardware pin configuration - EINT[23:21] – + * must be set as input for starting up after + * wakeup from sleep mode + */ + s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT); + } } static int s3c2410_pm_resume(struct sys_device *dev) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 43160183571..478f4b4606c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -674,7 +674,7 @@ static void __init jive_machine_init(void) } MACHINE_START(JIVE, "JIVE") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index faddb36ed23..ba93a356a83 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -150,7 +150,7 @@ static void __init smdk2413_machine_init(void) } MACHINE_START(S3C2413, "S3C2413") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, @@ -163,7 +163,7 @@ MACHINE_START(S3C2413, "S3C2413") MACHINE_END MACHINE_START(SMDK2412, "SMDK2412") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, @@ -176,7 +176,7 @@ MACHINE_START(SMDK2412, "SMDK2412") MACHINE_END MACHINE_START(SMDK2413, "SMDK2413") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 9d102b91209..cd8e7de388f 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -188,4 +188,17 @@ config MACH_MINI2440 Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. +config MACH_RX1950 + bool "HP iPAQ rx1950" + select CPU_S3C2442 + select S3C24XX_DCLK + select PM_H1940 if PM + select I2C + select S3C2410_PWM + select S3C_DEV_NAND + select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2440_XTAL_16934400 + help + Say Y here if you're using HP iPAQ rx1950 + endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index c85ba32d895..d5440fa34b0 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o +obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o # extra machine support diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c new file mode 100644 index 00000000000..8603b577a24 --- /dev/null +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -0,0 +1,582 @@ +/* linux/arch/arm/mach-s3c2440/mach-rx1950.c + * + * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, + * Copyright (c) 2007-2010 Vasily Khoruzhick + * + * based on smdk2440 written by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/sysdev.h> +#include <linux/pwm_backlight.h> +#include <linux/pwm.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <linux/mmc/host.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach-types.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-gpioj.h> +#include <mach/h1940.h> +#include <mach/fb.h> + +#include <plat/clock.h> +#include <plat/regs-serial.h> +#include <plat/regs-iic.h> +#include <plat/mci.h> +#include <plat/udc.h> +#include <plat/nand.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> +#include <plat/ts.h> + +#define LCD_PWM_PERIOD 192960 +#define LCD_PWM_DUTY 127353 + +static struct map_desc rx1950_iodesc[] __initdata = { +}; + +static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = { + [0] = { + .name = "fclk", + .divisor = 0x0a, + .min_baud = 0, + .max_baud = 0, + }, +}; + +static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + .clocks = rx1950_serial_clocks, + .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + .clocks = rx1950_serial_clocks, + .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x43, + .ufcon = 0xf1, + .clocks = rx1950_serial_clocks, + .clocks_size = ARRAY_SIZE(rx1950_serial_clocks), + }, +}; + +static struct s3c2410fb_display rx1950_display = { + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + .xres = 240, + .yres = 320, + .bpp = 16, + + .pixclock = 260000, + .left_margin = 10, + .right_margin = 20, + .hsync_len = 10, + .upper_margin = 2, + .lower_margin = 2, + .vsync_len = 2, + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_HWSWP | + (0x02 << 13) | + (0x02 << 15), + +}; + +static struct s3c2410fb_mach_info rx1950_lcd_cfg = { + .displays = &rx1950_display, + .num_displays = 1, + .default_display = 0, + + .lpcsel = 0x02, + .gpccon = 0xaa9556a9, + .gpccon_mask = 0xffc003fc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa90aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000fcfd, + .gpdup_mask = 0xffffffff, + +}; + +static struct pwm_device *lcd_pwm; + +void rx1950_lcd_power(int enable) +{ + int i; + static int enabled; + if (enabled == enable) + return; + if (!enable) { + + /* GPC11-GPC15->OUTPUT */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPC(i), 1); + + /* Wait a bit here... */ + mdelay(100); + + /* GPD2-GPD7->OUTPUT */ + /* GPD11-GPD15->OUTPUT */ + /* GPD2-GPD7->1, GPD11-GPD15->1 */ + for (i = 2; i < 8; i++) + gpio_direction_output(S3C2410_GPD(i), 1); + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPD(i), 1); + + /* Wait a bit here...*/ + mdelay(100); + + /* GPB0->OUTPUT, GPB0->0 */ + gpio_direction_output(S3C2410_GPB(0), 0); + + /* GPC1-GPC4->OUTPUT, GPC1-4->0 */ + for (i = 1; i < 5; i++) + gpio_direction_output(S3C2410_GPC(i), 0); + + /* GPC15-GPC11->0 */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPC(i), 0); + + /* GPD15-GPD11->0, GPD2->GPD7->0 */ + for (i = 11; i < 16; i++) + gpio_direction_output(S3C2410_GPD(i), 0); + + for (i = 2; i < 8; i++) + gpio_direction_output(S3C2410_GPD(i), 0); + + /* GPC6->0, GPC7->0, GPC5->0 */ + gpio_direction_output(S3C2410_GPC(6), 0); + gpio_direction_output(S3C2410_GPC(7), 0); + gpio_direction_output(S3C2410_GPC(5), 0); + + /* GPB1->OUTPUT, GPB1->0 */ + gpio_direction_output(S3C2410_GPB(1), 0); + pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD); + pwm_disable(lcd_pwm); + + /* GPC0->0, GPC10->0 */ + gpio_direction_output(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(10), 0); + } else { + pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD); + pwm_enable(lcd_pwm); + + gpio_direction_output(S3C2410_GPC(0), 1); + gpio_direction_output(S3C2410_GPC(5), 1); + + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1); + gpio_direction_output(S3C2410_GPC(7), 1); + + for (i = 1; i < 5; i++) + s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); + + for (i = 11; i < 16; i++) + s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2)); + + for (i = 2; i < 8; i++) + s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); + + for (i = 11; i < 16; i++) + s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2)); + + gpio_direction_output(S3C2410_GPC(10), 1); + gpio_direction_output(S3C2410_GPC(6), 1); + } + enabled = enable; +} + +static void rx1950_bl_power(int enable) +{ + static int enabled; + if (enabled == enable) + return; + if (!enable) { + gpio_direction_output(S3C2410_GPB(0), 0); + } else { + /* LED driver need a "push" to power on */ + gpio_direction_output(S3C2410_GPB(0), 1); + /* Warm up backlight for one period of PWM. + * Without this trick its almost impossible to + * enable backlight with low brightness value + */ + ndelay(48000); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + } + enabled = enable; +} + +static int rx1950_backlight_init(struct device *dev) +{ + WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); + lcd_pwm = pwm_request(1, "RX1950 LCD"); + if (IS_ERR(lcd_pwm)) { + dev_err(dev, "Unable to request PWM for LCD power!\n"); + return PTR_ERR(lcd_pwm); + } + + rx1950_lcd_power(1); + rx1950_bl_power(1); + + return 0; +} + +static void rx1950_backlight_exit(struct device *dev) +{ + rx1950_bl_power(0); + rx1950_lcd_power(0); + + pwm_free(lcd_pwm); + gpio_free(S3C2410_GPB(0)); +} + + +static int rx1950_backlight_notify(struct device *dev, int brightness) +{ + if (!brightness) { + rx1950_bl_power(0); + rx1950_lcd_power(0); + } else { + rx1950_lcd_power(1); + rx1950_bl_power(1); + } + return brightness; +} + +static struct platform_pwm_backlight_data rx1950_backlight_data = { + .pwm_id = 0, + .max_brightness = 24, + .dft_brightness = 4, + .pwm_period_ns = 48000, + .init = rx1950_backlight_init, + .notify = rx1950_backlight_notify, + .exit = rx1950_backlight_exit, +}; + +static struct platform_device rx1950_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &rx1950_backlight_data, + }, +}; + +static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd) +{ + switch (power_mode) { + case MMC_POWER_OFF: + gpio_direction_output(S3C2410_GPJ(1), 0); + break; + case MMC_POWER_UP: + case MMC_POWER_ON: + gpio_direction_output(S3C2410_GPJ(1), 1); + break; + default: + break; + } +} + +static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = { + .gpio_detect = S3C2410_GPF(5), + .gpio_wprotect = S3C2410_GPH(8), + .set_power = rx1950_set_mmc_power, + .ocr_avail = MMC_VDD_32_33, +}; + +static struct mtd_partition rx1950_nand_part[] = { + [0] = { + .name = "Boot0", + .offset = 0, + .size = 0x4000, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "Boot1", + .offset = MTDPART_OFS_APPEND, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, + }, + [2] = { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x300000, + .mask_flags = 0, + }, + [3] = { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct s3c2410_nand_set rx1950_nand_sets[] = { + [0] = { + .name = "Internal", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(rx1950_nand_part), + .partitions = rx1950_nand_part, + }, +}; + +static struct s3c2410_platform_nand rx1950_nand_info = { + .tacls = 25, + .twrph0 = 50, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(rx1950_nand_sets), + .sets = rx1950_nand_sets, +}; + +static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + switch (cmd) { + case S3C2410_UDC_P_ENABLE: + gpio_direction_output(S3C2410_GPJ(5), 1); + break; + case S3C2410_UDC_P_DISABLE: + gpio_direction_output(S3C2410_GPJ(5), 0); + break; + case S3C2410_UDC_P_RESET: + break; + default: + break; + } +} + +static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { + .udc_command = rx1950_udc_pullup, + .vbus_pin = S3C2410_GPG(5), + .vbus_pin_inverted = 1, +}; + +static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 3, +}; + +static struct gpio_keys_button rx1950_gpio_keys_table[] = { + { + .code = KEY_POWER, + .gpio = S3C2410_GPF(0), + .active_low = 1, + .desc = "Power button", + .wakeup = 1, + }, + { + .code = KEY_F5, + .gpio = S3C2410_GPF(7), + .active_low = 1, + .desc = "Record button", + }, + { + .code = KEY_F1, + .gpio = S3C2410_GPG(0), + .active_low = 1, + .desc = "Calendar button", + }, + { + .code = KEY_F2, + .gpio = S3C2410_GPG(2), + .active_low = 1, + .desc = "Contacts button", + }, + { + .code = KEY_F3, + .gpio = S3C2410_GPG(3), + .active_low = 1, + .desc = "Mail button", + }, + { + .code = KEY_F4, + .gpio = S3C2410_GPG(7), + .active_low = 1, + .desc = "WLAN button", + }, + { + .code = KEY_LEFT, + .gpio = S3C2410_GPG(10), + .active_low = 1, + .desc = "Left button", + }, + { + .code = KEY_RIGHT, + .gpio = S3C2410_GPG(11), + .active_low = 1, + .desc = "Right button", + }, + { + .code = KEY_UP, + .gpio = S3C2410_GPG(4), + .active_low = 1, + .desc = "Up button", + }, + { + .code = KEY_DOWN, + .gpio = S3C2410_GPG(6), + .active_low = 1, + .desc = "Down button", + }, + { + .code = KEY_ENTER, + .gpio = S3C2410_GPG(9), + .active_low = 1, + .desc = "Ok button" + }, +}; + +static struct gpio_keys_platform_data rx1950_gpio_keys_data = { + .buttons = rx1950_gpio_keys_table, + .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table), +}; + +static struct platform_device rx1950_device_gpiokeys = { + .name = "gpio-keys", + .dev.platform_data = &rx1950_gpio_keys_data, +}; + +static struct s3c2410_platform_i2c rx1950_i2c_data = { + .flags = 0, + .slave_addr = 0x42, + .frequency = 400 * 1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +static struct platform_device *rx1950_devices[] __initdata = { + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_iis, + &s3c_device_usbgadget, + &s3c_device_rtc, + &s3c_device_nand, + &s3c_device_sdi, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_timer[0], + &s3c_device_timer[1], + &rx1950_backlight, + &rx1950_device_gpiokeys, +}; + +static struct clk *rx1950_clocks[] __initdata = { + &s3c24xx_clkout0, + &s3c24xx_clkout1, +}; + +static void __init rx1950_map_io(void) +{ + s3c24xx_clkout0.parent = &clk_h; + s3c24xx_clkout1.parent = &clk_f; + + s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); + + s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); + s3c24xx_init_clocks(16934000); + s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + + /* setup PM */ + +#ifdef CONFIG_PM_H1940 + memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8); +#endif + + s3c_pm_init(); +} + +static void __init rx1950_init_machine(void) +{ + int i; + + s3c24xx_fb_set_platdata(&rx1950_lcd_cfg); + s3c24xx_udc_set_platdata(&rx1950_udc_cfg); + s3c24xx_ts_set_platdata(&rx1950_ts_cfg); + s3c24xx_mci_set_platdata(&rx1950_mmc_cfg); + s3c_i2c0_set_platdata(&rx1950_i2c_data); + s3c_nand_set_platdata(&rx1950_nand_info); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup")); + gpio_direction_output(S3C2410_GPJ(5), 0); + + /* mmc power is disabled by default */ + WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power")); + gpio_direction_output(S3C2410_GPJ(1), 0); + + for (i = 0; i < 8; i++) + WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); + + for (i = 10; i < 16; i++) + WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power")); + + for (i = 2; i < 8; i++) + WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); + + for (i = 11; i < 16; i++) + WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power")); + + WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power")); + + platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); +} + +MACHINE_START(RX1950, "HP iPAQ RX1950") + /* Maintainers: Vasily Khoruzhick */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = rx1950_map_io, + .init_irq = s3c24xx_init_irq, + .init_machine = rx1950_init_machine, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 1e836e506f8..d2946de3f36 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -209,7 +209,7 @@ static void __init rx3715_init_machine(void) } MACHINE_START(RX3715, "IPAQ-RX3715") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 3ac3d636d61..df83276d85a 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -174,7 +174,7 @@ static void __init smdk2440_machine_init(void) } MACHINE_START(S3C2440, "SMDK2440") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index e2e362bda9b..4c863d3a52f 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -131,7 +131,7 @@ static void __init smdk2443_machine_init(void) } MACHINE_START(SMDK2443, "SMDK2443") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 33ccf7bf766..5567e037b0d 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -414,7 +414,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(int channel, +int s3c2410_dma_devconfig(unsigned int channel, enum s3c2410_dmasrc source, unsigned long devaddr) { diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index f7b18983950..59916676d8d 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -84,7 +84,7 @@ static void __init smdk6400_machine_init(void) } MACHINE_START(SMDK6400, "SMDK6400") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 2d5afd221d7..9d51455feb3 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -656,7 +656,7 @@ static void __init smdk6410_machine_init(void) } MACHINE_START(SMDK6410, "SMDK6410") - /* Maintainer: Ben Dooks <ben@fluff.org> */ + /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .phys_io = S3C_PA_UART & 0xfff00000, .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, .boot_params = S3C64XX_PA_SDRAM + 0x100, diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 1794131aeac..ca3b3206e6f 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -88,7 +88,7 @@ void __init s5p6440_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5p6440_sysclass = { +struct sysdev_class s5p6440_sysclass = { .name = "s5p6440-core", }; diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h index c4bb7c55547..6a2a02fdf12 100644 --- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h @@ -1,11 +1,14 @@ /* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Copyright 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * * S5P6440 - pwm clock and timer support * @@ -14,16 +17,19 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_ARCH_PWMCLK_H +#define __ASM_ARCH_PWMCLK_H __FILE__ + /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. + * @tcfg: The timer TCFG1 register bits shifted down to 0. * * Return true if the given configuration from TCFG1 is a TCLK instead * any of the TDIV clocks. */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C2410_TCFG1_MUX_TCLK; + return 0; } /** @@ -35,7 +41,7 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << (1 + tcfg1); + return 1 << tcfg1; } /** @@ -45,7 +51,7 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 0; + return 1; } /** @@ -56,7 +62,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div) - 1; + return ilog2(div); } -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK +#define S3C_TCFG1_MUX_TCLK 0 + +#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index bc2524df89b..a48fb553fd0 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -95,7 +95,7 @@ void __init s5p6442_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5p6442_sysclass = { +struct sysdev_class s5p6442_sysclass = { .name = "s5p6442-core", }; diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h index 15e8525da0f..2724b37def3 100644 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h @@ -1,13 +1,14 @@ /* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Copyright 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * * S5P6442 - pwm clock and timer support * @@ -21,14 +22,14 @@ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. + * @tcfg: The timer TCFG1 register bits shifted down to 0. * * Return true if the given configuration from TCFG1 is a TCLK instead * any of the TDIV clocks. */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C2410_TCFG1_MUX_TCLK; + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -40,7 +41,7 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << (1 + tcfg1); + return 1 << tcfg1; } /** @@ -50,7 +51,7 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 0; + return 1; } /** @@ -61,9 +62,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div) - 1; + return ilog2(div); } -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK #endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 8ebf51c52a0..0acbdb34b56 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpiolib.o # machine support diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 0e0f8fde2aa..2b776eb5d15 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -100,7 +100,7 @@ void __init s5pv210_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5pv210_sysclass = { +struct sysdev_class s5pv210_sysclass = { .name = "s5pv210-core", }; diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c new file mode 100644 index 00000000000..9ea8972e023 --- /dev/null +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -0,0 +1,261 @@ +/* linux/arch/arm/mach-s5pv210/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <mach/map.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* GPIO bank's base address given the index of the bank in the + * list of all gpio banks. + */ +#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* + * Following are the gpio banks in v210. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + }, + }, +}; + +static __init int s5pv210_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; + int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int i = 0; + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5PV210_BANK_BASE(i); + } + + samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); + + return 0; +} +core_initcall(s5pv210_gpiolib_init); diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h index 533b020e21e..d6461ba2b71 100644 --- a/arch/arm/mach-s5pv210/include/mach/gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/gpio.h @@ -18,6 +18,8 @@ #define gpio_cansleep __gpio_cansleep #define gpio_to_irq __gpio_to_irq +/* Practically, GPIO banks upto MP03 are the configurable gpio banks */ + /* GPIO bank sizes */ #define S5PV210_GPIO_A0_NR (8) #define S5PV210_GPIO_A1_NR (4) @@ -47,6 +49,10 @@ #define S5PV210_GPIO_J3_NR (8) #define S5PV210_GPIO_J4_NR (5) +#define S5PV210_GPIO_MP01_NR (8) +#define S5PV210_GPIO_MP02_NR (4) +#define S5PV210_GPIO_MP03_NR (8) + /* GPIO bank numbers */ /* CONFIG_S3C_GPIO_SPACE allows the user to select extra @@ -85,6 +91,9 @@ enum s5p_gpio_number { S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1), S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2), S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3), + S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4), + S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01), + S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02), }; /* S5PV210 GPIO number definitions */ @@ -115,13 +124,16 @@ enum s5p_gpio_number { #define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr)) #define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr)) #define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr)) +#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr)) +#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr)) +#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr)) /* the end of the S5PV210 specific gpios */ -#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1) +#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1) #define S3C_GPIO_END S5PV210_GPIO_END -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \ +/* define the number of gpios we need to the one after the MP03() range */ +#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \ CONFIG_SAMSUNG_GPIO_EXTRA + 1) #include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h index 69027fea987..f8a9f1b330e 100644 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h @@ -1,13 +1,14 @@ /* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * * S5PV210 - pwm clock and timer support * @@ -21,14 +22,14 @@ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. + * @tcfg: The timer TCFG1 register bits shifted down to 0. * * Return true if the given configuration from TCFG1 is a TCLK instead * any of the TDIV clocks. */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C2410_TCFG1_MUX_TCLK; + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -40,7 +41,7 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << (1 + tcfg1); + return 1 << tcfg1; } /** @@ -50,7 +51,7 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 0; + return 1; } /** @@ -61,9 +62,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div) - 1; + return ilog2(div); } -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK #endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 241c24a1c18..45a1bc275f0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -869,9 +869,10 @@ void __init reserve_node_zero(pg_data_t *pgdat) if (machine_is_p720t()) res_size = 0x00014000; - /* H1940 and RX3715 need to reserve this for suspend */ + /* H1940, RX3715 and RX1950 need to reserve this for suspend */ - if (machine_is_h1940() || machine_is_rx3715()) { + if (machine_is_h1940() || machine_is_rx3715() + || machine_is_rx1950()) { reserve_bootmem_node(pgdat, 0x30003000, 0x1000, BOOTMEM_DEFAULT); reserve_bootmem_node(pgdat, 0x30081000, 0x1000, diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 9265f09bfa5..cd5b41d0b5a 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/string.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -149,10 +150,14 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) { struct s3c2410fb_mach_info *npd; - npd = kmalloc(sizeof(*npd), GFP_KERNEL); + npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL); if (npd) { - memcpy(npd, pd, sizeof(*npd)); s3c_device_lcd.dev.platform_data = npd; + npd->displays = kmemdup(pd->displays, + sizeof(struct s3c2410fb_display) * npd->num_displays, + GFP_KERNEL); + if (!npd->displays) + printk(KERN_ERR "no memory for LCD display data\n"); } else { printk(KERN_ERR "no memory for LCD platform data\n"); } @@ -338,14 +343,6 @@ struct platform_device s3c_device_adc = { .resource = s3c_adc_resource, }; -/* HWMON */ - -struct platform_device s3c_device_hwmon = { - .name = "s3c-hwmon", - .id = -1, - .dev.parent = &s3c_device_adc.dev, -}; - /* SDI */ static struct resource s3c_sdi_resource[] = { @@ -371,7 +368,7 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); -void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) +void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) { struct s3c24xx_mci_pdata *npd; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 93827b3d4e8..6ad274e7593 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1104,7 +1104,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(int channel, +int s3c2410_dma_devconfig(unsigned int channel, enum s3c2410_dmasrc source, unsigned long devaddr) { diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index aa96e335073..3fef951445d 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -33,6 +33,11 @@ struct clk clk_ext_xtal_mux = { .id = -1, }; +struct clk clk_xusbxti = { + .name = "xusbxti", + .id = -1, +}; + static struct clk s5p_clk_27m = { .name = "clk_27m", .id = -1, diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 42e757f2e40..9ff3d718be3 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -79,7 +79,7 @@ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) -#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x)) +#define S5P_TIMER_IRQ(x) (11 + (x)) #define IRQ_TIMER0 S5P_TIMER_IRQ(0) #define IRQ_TIMER1 S5P_TIMER_IRQ(1) diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 56fb8b414d4..a476a9f1469 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -23,6 +23,7 @@ #define clk_fin_vpll clk_ext_xtal_mux extern struct clk clk_ext_xtal_mux; +extern struct clk clk_xusbxti; extern struct clk clk_48m; extern struct clk clk_fout_apll; extern struct clk clk_fout_mpll; diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index d552c65fa1b..7a36cf85e13 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HWMON + bool + help + Compile in platform device definitions for HWMON + config S3C_DEV_I2C1 bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 22c89d08f6e..0ad820acc38 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c new file mode 100644 index 00000000000..b3ffb958725 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hwmon.c @@ -0,0 +1,42 @@ +/* linux/arch/arm/plat-samsung/dev-hwmon.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Adapted for HWMON by Maurus Cuelenaere + * + * Samsung series device definition for HWMON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <plat/devs.h> +#include <plat/hwmon.h> + +struct platform_device s3c_device_hwmon = { + .name = "s3c-hwmon", + .id = -1, + .dev.parent = &s3c_device_adc.dev, +}; + +void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) +{ + struct s3c_hwmon_pdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_hwmon.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f..c54f318991b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -78,6 +78,9 @@ extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; +extern struct sysdev_class s5p6440_sysclass; +extern struct sysdev_class s5p6442_sysclass; +extern struct sysdev_class s5pv210_sysclass; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 7584d751ed5..2e8f8c6560d 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -110,8 +110,8 @@ extern int s3c2410_dma_config(unsigned int channel, int xferunit); * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - unsigned long devaddr); +extern int s3c2410_dma_devconfig(unsigned int channel, + enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition * diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h index 1ba88ea0aa3..c167e4429bc 100644 --- a/arch/arm/plat-samsung/include/plat/hwmon.h +++ b/arch/arm/plat-samsung/include/plat/hwmon.h @@ -37,5 +37,15 @@ struct s3c_hwmon_pdata { struct s3c_hwmon_chcfg *in[8]; }; +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + #endif /* __ASM_ARCH_ADC_HWMON_H */ |