diff options
-rw-r--r-- | Documentation/fb/vesafb.txt | 16 | ||||
-rw-r--r-- | arch/ppc/kernel/head_44x.S | 12 | ||||
-rw-r--r-- | arch/ppc/kernel/misc.S | 3 | ||||
-rw-r--r-- | arch/ppc/platforms/4xx/ebony.c | 6 | ||||
-rw-r--r-- | arch/ppc/platforms/4xx/ebony.h | 13 | ||||
-rw-r--r-- | arch/ppc/platforms/4xx/ocotea.c | 4 | ||||
-rw-r--r-- | arch/ppc/platforms/4xx/ocotea.h | 13 | ||||
-rw-r--r-- | arch/ppc64/kernel/misc.S | 6 | ||||
-rw-r--r-- | arch/x86_64/lib/csum-copy.S | 2 | ||||
-rw-r--r-- | include/asm-ppc/unistd.h | 5 | ||||
-rw-r--r-- | include/asm-ppc64/unistd.h | 5 | ||||
-rw-r--r-- | mm/page_alloc.c | 21 |
12 files changed, 80 insertions, 26 deletions
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt index 814e2f56a6a..62db6758d1c 100644 --- a/Documentation/fb/vesafb.txt +++ b/Documentation/fb/vesafb.txt @@ -144,7 +144,21 @@ vgapal Use the standard vga registers for palette changes. This is the default. pmipal Use the protected mode interface for palette changes. -mtrr setup memory type range registers for the vesafb framebuffer. +mtrr:n setup memory type range registers for the vesafb framebuffer + where n: + 0 - disabled (equivalent to nomtrr) + 1 - uncachable + 2 - write-back + 3 - write-combining (default) + 4 - write-through + + If you see the following in dmesg, choose the type that matches the + old one. In this example, use "mtrr:2". +... +mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining +... + +nomtrr disable mtrr vremap:n remap 'n' MiB of video RAM. If 0 or not specified, remap memory diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 6c7ae605246..72ee8f33bde 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -179,14 +179,14 @@ skpinv: addi r4,r4,1 /* Increment */ 4: #ifdef CONFIG_SERIAL_TEXT_DEBUG /* - * Add temporary UART mapping for early debug. This - * mapping must be identical to that used by the early - * bootloader code since the same asm/serial.h parameters - * are used for polled operation. + * Add temporary UART mapping for early debug. + * We can map UART registers wherever we want as long as they don't + * interfere with other system mappings (e.g. with pinned entries). + * For an example of how we handle this - see ocotea.h. --ebs */ /* pageid fields */ lis r3,UART0_IO_BASE@h - ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M + ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ @@ -196,7 +196,7 @@ skpinv: addi r4,r4,1 /* Increment */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,1 /* TLB slot 1 */ + li r0,0 /* TLB slot 0 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 191a8def3bd..c2fb85b49a1 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -1451,3 +1451,6 @@ _GLOBAL(sys_call_table) .long sys_waitid .long sys_ioprio_set .long sys_ioprio_get + .long sys_inotify_init /* 275 */ + .long sys_inotify_add_watch + .long sys_inotify_rm_watch diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index cd11734ef7c..509e69a095f 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -7,7 +7,7 @@ * Copyright 2002-2005 MontaVista Software Inc. * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003-2005 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,6 +50,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gp_common.h> @@ -248,6 +249,9 @@ ebony_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index 47c391c9174..d08faa46a0a 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -56,9 +56,18 @@ * Serial port defines */ -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif /* external Epson SG-615P */ #define BASE_BAUD 691200 @@ -66,7 +75,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 5f82a6bc704..8fc34a34476 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -48,6 +48,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> @@ -266,6 +267,9 @@ ocotea_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 202dc825119..33251153ac5 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -55,15 +55,24 @@ */ #define RS_TABLE_SIZE 2 -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif #define BASE_BAUD 11059200/16 #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 59f4f997381..a05b50b738e 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -1129,6 +1129,9 @@ _GLOBAL(sys_call_table32) .llong .compat_sys_waitid .llong .sys32_ioprio_set .llong .sys32_ioprio_get + .llong .sys_inotify_init /* 275 */ + .llong .sys_inotify_add_watch + .llong .sys_inotify_rm_watch .balign 8 _GLOBAL(sys_call_table) @@ -1407,3 +1410,6 @@ _GLOBAL(sys_call_table) .llong .sys_waitid .llong .sys_ioprio_set .llong .sys_ioprio_get + .llong .sys_inotify_init /* 275 */ + .llong .sys_inotify_add_watch + .llong .sys_inotify_rm_watch diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S index 01808ec3783..72fd55ee896 100644 --- a/arch/x86_64/lib/csum-copy.S +++ b/arch/x86_64/lib/csum-copy.S @@ -188,8 +188,8 @@ csum_partial_copy_generic: source movw (%rdi),%bx adcl %ebx,%eax - dest decl %ecx + dest movw %bx,(%rsi) leaq 2(%rdi),%rdi leaq 2(%rsi),%rsi diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h index a7894e0fbbb..3173ab3d2eb 100644 --- a/include/asm-ppc/unistd.h +++ b/include/asm-ppc/unistd.h @@ -279,8 +279,11 @@ #define __NR_waitid 272 #define __NR_ioprio_set 273 #define __NR_ioprio_get 274 +#define __NR_inotify_init 275 +#define __NR_inotify_add_watch 276 +#define __NR_inotify_rm_watch 277 -#define __NR_syscalls 275 +#define __NR_syscalls 278 #define __NR(n) #n diff --git a/include/asm-ppc64/unistd.h b/include/asm-ppc64/unistd.h index 4a94acf6bfe..977bc980c1a 100644 --- a/include/asm-ppc64/unistd.h +++ b/include/asm-ppc64/unistd.h @@ -285,8 +285,11 @@ #define __NR_waitid 272 #define __NR_ioprio_set 273 #define __NR_ioprio_get 274 +#define __NR_inotify_init 275 +#define __NR_inotify_add_watch 276 +#define __NR_inotify_rm_watch 277 -#define __NR_syscalls 275 +#define __NR_syscalls 278 #ifdef __KERNEL__ #define NR_syscalls __NR_syscalls #endif diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 42bccfb8464..8d088371196 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1061,20 +1061,19 @@ unsigned int nr_free_pages_pgdat(pg_data_t *pgdat) static unsigned int nr_free_zone_pages(int offset) { - pg_data_t *pgdat; + /* Just pick one node, since fallback list is circular */ + pg_data_t *pgdat = NODE_DATA(numa_node_id()); unsigned int sum = 0; - for_each_pgdat(pgdat) { - struct zonelist *zonelist = pgdat->node_zonelists + offset; - struct zone **zonep = zonelist->zones; - struct zone *zone; + struct zonelist *zonelist = pgdat->node_zonelists + offset; + struct zone **zonep = zonelist->zones; + struct zone *zone; - for (zone = *zonep++; zone; zone = *zonep++) { - unsigned long size = zone->present_pages; - unsigned long high = zone->pages_high; - if (size > high) - sum += size - high; - } + for (zone = *zonep++; zone; zone = *zonep++) { + unsigned long size = zone->present_pages; + unsigned long high = zone->pages_high; + if (size > high) + sum += size - high; } return sum; |