summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/phy/Kconfig12
-rw-r--r--drivers/net/phy/Makefile12
-rw-r--r--drivers/net/phy/mdio_bus.c4
-rw-r--r--drivers/net/phy/phy.c9
-rw-r--r--drivers/net/phy/phy.c.orig860
-rw-r--r--drivers/net/phy/phy_device.c48
-rw-r--r--include/linux/phy.h1
7 files changed, 53 insertions, 893 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 8b5db2343cc..c2f1bf1d02d 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
menu "PHY device support"
config PHYLIB
- bool "PHY Device support and infrastructure"
+ tristate "PHY Device support and infrastructure"
depends on NET_ETHERNET
help
Ethernet controllers are usually attached to PHY
@@ -24,31 +24,31 @@ comment "MII PHY device drivers"
depends on PHYLIB
config MARVELL_PHY
- bool "Drivers for Marvell PHYs"
+ tristate "Drivers for Marvell PHYs"
depends on PHYLIB
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
- bool "Drivers for Davicom PHYs"
+ tristate "Drivers for Davicom PHYs"
depends on PHYLIB
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
- bool "Drivers for Quality Semiconductor PHYs"
+ tristate "Drivers for Quality Semiconductor PHYs"
depends on PHYLIB
---help---
Currently supports the qs6612
config LXT_PHY
- bool "Drivers for the Intel LXT PHYs"
+ tristate "Drivers for the Intel LXT PHYs"
depends on PHYLIB
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
- bool "Drivers for the Cicada PHYs"
+ tristate "Drivers for the Cicada PHYs"
depends on PHYLIB
---help---
Currently supports the cis8204
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1af05de6ced..fb7cb385a65 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,9 +1,9 @@
# Makefile for Linux PHY drivers
-obj-$(CONFIG_PHYLIB) += phy.o phy_device.o mdio_bus.o
+libphy-objs := phy.o phy_device.o mdio_bus.o
-obj-$(CONFIG_MARVELL_PHY) += marvell.o
-obj-$(CONFIG_DAVICOM_PHY) += davicom.o
-obj-$(CONFIG_CICADA_PHY) += cicada.o
-obj-$(CONFIG_LXT_PHY) += lxt.o
-obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_MARVELL_PHY) += libphy.o marvell.o
+obj-$(CONFIG_DAVICOM_PHY) += libphy.o davicom.o
+obj-$(CONFIG_CICADA_PHY) += libphy.o cicada.o
+obj-$(CONFIG_LXT_PHY) += libphy.o lxt.o
+obj-$(CONFIG_QSEMI_PHY) += libphy.o qsemi.o
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e75103ba6f8..5fbea6acfe8 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -165,9 +165,9 @@ struct bus_type mdio_bus_type = {
.resume = mdio_bus_resume,
};
-static int __init mdio_bus_init(void)
+int __init mdio_bus_init(void)
{
return bus_register(&mdio_bus_type);
}
-subsys_initcall(mdio_bus_init);
+
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e2c6896b92d..934065dd637 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -39,7 +39,6 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-static void phy_change(void *data);
static void phy_timer(unsigned long data);
/* Convenience function to print out the current phy status
@@ -464,7 +463,6 @@ void phy_stop_machine(struct phy_device *phydev)
phydev->adjust_state = NULL;
}
-#ifdef CONFIG_PHYCONTROL
/* phy_error:
*
* Moves the PHY to the HALTED state in response to a read
@@ -479,6 +477,10 @@ void phy_error(struct phy_device *phydev)
spin_unlock(&phydev->lock);
}
+#ifdef CONFIG_PHYCONTROL
+
+static void phy_change(void *data);
+
/* phy_interrupt
*
* description: When a PHY interrupt occurs, the handler disables
@@ -672,6 +674,8 @@ void phy_start(struct phy_device *phydev)
EXPORT_SYMBOL(phy_stop);
EXPORT_SYMBOL(phy_start);
+#endif /* CONFIG_PHYCONTROL */
+
/* PHY timer which handles the state machine */
static void phy_timer(unsigned long data)
{
@@ -859,4 +863,3 @@ static void phy_timer(unsigned long data)
mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
}
-#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy.c.orig b/drivers/net/phy/phy.c.orig
deleted file mode 100644
index 6af17cec9ac..00000000000
--- a/drivers/net/phy/phy.c.orig
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * drivers/net/phy/phy.c
- *
- * Framework for configuring and reading PHY devices
- * Based on code in sungem_phy.c and gianfar_phy.c
- *
- * Author: Andy Fleming
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-static void phy_change(void *data);
-static void phy_timer(unsigned long data);
-
-/* Convenience function to print out the current phy status
- */
-void phy_print_status(struct phy_device *phydev)
-{
- pr_info("%s: Link is %s", phydev->dev.bus_id,
- phydev->link ? "Up" : "Down");
- if (phydev->link)
- printk(" - %d/%s", phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "Full" : "Half");
-
- printk("\n");
-}
-EXPORT_SYMBOL(phy_print_status);
-
-
-/* Convenience functions for reading/writing a given PHY
- * register. They MUST NOT be called from interrupt context,
- * because the bus read/write functions may wait for an interrupt
- * to conclude the operation. */
-int phy_read(struct phy_device *phydev, u16 regnum)
-{
- int retval;
- struct mii_bus *bus = phydev->bus;
-
- spin_lock_bh(&bus->mdio_lock);
- retval = bus->read(bus, phydev->addr, regnum);
- spin_unlock_bh(&bus->mdio_lock);
-
- return retval;
-}
-EXPORT_SYMBOL(phy_read);
-
-int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
-{
- int err;
- struct mii_bus *bus = phydev->bus;
-
- spin_lock_bh(&bus->mdio_lock);
- err = bus->write(bus, phydev->addr, regnum, val);
- spin_unlock_bh(&bus->mdio_lock);
-
- return err;
-}
-EXPORT_SYMBOL(phy_write);
-
-
-int phy_clear_interrupt(struct phy_device *phydev)
-{
- int err = 0;
-
- if (phydev->drv->ack_interrupt)
- err = phydev->drv->ack_interrupt(phydev);
-
- return err;
-}
-
-
-int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
-{
- int err = 0;
-
- phydev->interrupts = interrupts;
- if (phydev->drv->config_intr)
- err = phydev->drv->config_intr(phydev);
-
- return err;
-}
-
-
-/* phy_aneg_done
- *
- * description: Reads the status register and returns 0 either if
- * auto-negotiation is incomplete, or if there was an error.
- * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
- */
-static inline int phy_aneg_done(struct phy_device *phydev)
-{
- int retval;
-
- retval = phy_read(phydev, MII_BMSR);
-
- return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
-}
-
-/* phy_start_aneg
- *
- * description: Calls the PHY driver's config_aneg, and then
- * sets the PHY state to PHY_AN if auto-negotiation is enabled,
- * and to PHY_FORCING if auto-negotiation is disabled. Unless
- * the PHY is currently HALTED.
- */
-int phy_start_aneg(struct phy_device *phydev)
-{
- int err;
-
- spin_lock(&phydev->lock);
-
- if (AUTONEG_DISABLE == phydev->autoneg)
- phy_sanitize_settings(phydev);
-
- err = phydev->drv->config_aneg(phydev);
-
- if (err < 0)
- goto out_unlock;
-
- if (phydev->state != PHY_HALTED) {
- if (AUTONEG_ENABLE == phydev->autoneg) {
- phydev->state = PHY_AN;
- phydev->link_timeout = PHY_AN_TIMEOUT;
- } else {
- phydev->state = PHY_FORCING;
- phydev->link_timeout = PHY_FORCE_TIMEOUT;
- }
- }
-
-out_unlock:
- spin_unlock(&phydev->lock);
- return err;
-}
-EXPORT_SYMBOL(phy_start_aneg);
-
-
-/* A structure for mapping a particular speed and duplex
- * combination to a particular SUPPORTED and ADVERTISED value */
-struct phy_setting {
- int speed;
- int duplex;
- u32 setting;
-};
-
-/* A mapping of all SUPPORTED settings to speed/duplex */
-static struct phy_setting settings[] = {
- {
- .speed = 10000,
- .duplex = DUPLEX_FULL,
- .setting = SUPPORTED_10000baseT_Full,
- },
- {
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
- .setting = SUPPORTED_1000baseT_Full,
- },
- {
- .speed = SPEED_1000,
- .duplex = DUPLEX_HALF,
- .setting = SUPPORTED_1000baseT_Half,
- },
- {
- .speed = SPEED_100,
- .duplex = DUPLEX_FULL,
- .setting = SUPPORTED_100baseT_Full,
- },
- {
- .speed = SPEED_100,
- .duplex = DUPLEX_HALF,
- .setting = SUPPORTED_100baseT_Half,
- },
- {
- .speed = SPEED_10,
- .duplex = DUPLEX_FULL,
- .setting = SUPPORTED_10baseT_Full,
- },
- {
- .speed = SPEED_10,
- .duplex = DUPLEX_HALF,
- .setting = SUPPORTED_10baseT_Half,
- },
-};
-
-#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
-
-/* phy_find_setting
- *
- * description: Searches the settings array for the setting which
- * matches the desired speed and duplex, and returns the index
- * of that setting. Returns the index of the last setting if
- * none of the others match.
- */
-static inline int phy_find_setting(int speed, int duplex)
-{
- int idx = 0;
-
- while (idx < ARRAY_SIZE(settings) &&
- (settings[idx].speed != speed ||
- settings[idx].duplex != duplex))
- idx++;
-
- return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
-}
-
-/* phy_find_valid
- * idx: The first index in settings[] to search
- * features: A mask of the valid settings
- *
- * description: Returns the index of the first valid setting less
- * than or equal to the one pointed to by idx, as determined by
- * the mask in features. Returns the index of the last setting
- * if nothing else matches.
- */
-static inline int phy_find_valid(int idx, u32 features)
-{
- while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
- idx++;
-
- return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
-}
-
-/* phy_sanitize_settings
- *
- * description: Make sure the PHY is set to supported speeds and
- * duplexes. Drop down by one in this order: 1000/FULL,
- * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
- */
-void phy_sanitize_settings(struct phy_device *phydev)
-{
- u32 features = phydev->supported;
- int idx;
-
- /* Sanitize settings based on PHY capabilities */
- if ((features & SUPPORTED_Autoneg) == 0)
- phydev->autoneg = 0;
-
- idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
- features);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-}
-EXPORT_SYMBOL(phy_sanitize_settings);
-
-/* phy_force_reduction
- *
- * description: Reduces the speed/duplex settings by
- * one notch. The order is so:
- * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
- * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
- */
-static void phy_force_reduction(struct phy_device *phydev)
-{
- int idx;
-
- idx = phy_find_setting(phydev->speed, phydev->duplex);
-
- idx++;
-
- idx = phy_find_valid(idx, phydev->supported);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-
- pr_info("Trying %d/%s\n", phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "FULL" : "HALF");
-}
-
-/* phy_ethtool_sset:
- * A generic ethtool sset function. Handles all the details
- *
- * A few notes about parameter checking:
- * - We don't set port or transceiver, so we don't care what they
- * were set to.
- * - phy_start_aneg() will make sure forced settings are sane, and
- * choose the next best ones from the ones selected, so we don't
- * care if ethtool tries to give us bad values
- */
-int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
-{
- if (cmd->phy_address != phydev->addr)
- return -EINVAL;
-
- /* We make sure that we don't pass unsupported
- * values in to the PHY */
- cmd->advertising &= phydev->supported;
-
- /* Verify the settings we care about. */
- if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
- return -EINVAL;
-
- if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
- return -EINVAL;
-
- if (cmd->autoneg == AUTONEG_DISABLE
- && ((cmd->speed != SPEED_1000
- && cmd->speed != SPEED_100
- && cmd->speed != SPEED_10)
- || (cmd->duplex != DUPLEX_HALF
- && cmd->duplex != DUPLEX_FULL)))
- return -EINVAL;
-
- phydev->autoneg = cmd->autoneg;
-
- phydev->speed = cmd->speed;
-
- phydev->advertising = cmd->advertising;
-
- if (AUTONEG_ENABLE == cmd->autoneg)
- phydev->advertising |= ADVERTISED_Autoneg;
- else
- phydev->advertising &= ~ADVERTISED_Autoneg;
-
- phydev->duplex = cmd->duplex;
-
- /* Restart the PHY */
- phy_start_aneg(phydev);
-
- return 0;
-}
-
-int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
-{
- cmd->supported = phydev->supported;
-
- cmd->advertising = phydev->advertising;
-
- cmd->speed = phydev->speed;
- cmd->duplex = phydev->duplex;
- cmd->port = PORT_MII;
- cmd->phy_address = phydev->addr;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->autoneg = phydev->autoneg;
-
- return 0;
-}
-
-
-/* Note that this function is currently incompatible with the
- * PHYCONTROL layer. It changes registers without regard to
- * current state. Use at own risk
- */
-int phy_mii_ioctl(struct phy_device *phydev,
- struct mii_ioctl_data *mii_data, int cmd)
-{
- u16 val = mii_data->val_in;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- mii_data->phy_id = phydev->addr;
- break;
- case SIOCGMIIREG:
- mii_data->val_out = phy_read(phydev, mii_data->reg_num);
- break;
-
- case SIOCSMIIREG:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (mii_data->phy_id == phydev->addr) {
- switch(mii_data->reg_num) {
- case MII_BMCR:
- if (val & (BMCR_RESET|BMCR_ANENABLE))
- phydev->autoneg = AUTONEG_DISABLE;
- else
- phydev->autoneg = AUTONEG_ENABLE;
- if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
- break;
- case MII_ADVERTISE:
- phydev->advertising = val;
- break;
- default:
- /* do nothing */
- break;
- }
- }
-
- phy_write(phydev, mii_data->reg_num, val);
-
- if (mii_data->reg_num == MII_BMCR
- && val & BMCR_RESET
- && phydev->drv->config_init)
- phydev->drv->config_init(phydev);
- break;
- }
-
- return 0;
-}
-
-/* phy_start_machine:
- *
- * description: The PHY infrastructure can run a state machine
- * which tracks whether the PHY is starting up, negotiating,
- * etc. This function starts the timer which tracks the state
- * of the PHY. If you want to be notified when the state
- * changes, pass in the callback, otherwise, pass NULL. If you
- * want to maintain your own state machine, do not call this
- * function. */
-void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *))
-{
- phydev->adjust_state = handler;
-
- init_timer(&phydev->phy_timer);
- phydev->phy_timer.function = &phy_timer;
- phydev->phy_timer.data = (unsigned long) phydev;
- mod_timer(&phydev->phy_timer, jiffies + HZ);
-}
-
-/* phy_stop_machine
- *
- * description: Stops the state machine timer, sets the state to
- * UP (unless it wasn't up yet), and then frees the interrupt,
- * if it is in use. This function must be called BEFORE
- * phy_detach.
- */
-void phy_stop_machine(struct phy_device *phydev)
-{
- del_timer_sync(&phydev->phy_timer);
-
- spin_lock(&phydev->lock);
- if (phydev->state > PHY_UP)
- phydev->state = PHY_UP;
- spin_unlock(&phydev->lock);
-
- if (phydev->irq != PHY_POLL)
- phy_stop_interrupts(phydev);
-
- phydev->adjust_state = NULL;
-}
-
-#ifdef CONFIG_PHYCONTROL
-/* phy_error:
- *
- * Moves the PHY to the HALTED state in response to a read
- * or write error, and tells the controller the link is down.
- * Must not be called from interrupt context, or while the
- * phydev->lock is held.
- */
-void phy_error(struct phy_device *phydev)
-{
- spin_lock(&phydev->lock);
- phydev->state = PHY_HALTED;
- spin_unlock(&phydev->lock);
-}
-
-/* phy_interrupt
- *
- * description: When a PHY interrupt occurs, the handler disables
- * interrupts, and schedules a work task to clear the interrupt.
- */
-static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
-{
- struct phy_device *phydev = phy_dat;
-
- /* The MDIO bus is not allowed to be written in interrupt
- * context, so we need to disable the irq here. A work
- * queue will write the PHY to disable and clear the
- * interrupt, and then reenable the irq line. */
- disable_irq_nosync(irq);
-
- schedule_work(&phydev->phy_queue);
-
- return IRQ_HANDLED;
-}
-
-/* Enable the interrupts from the PHY side */
-int phy_enable_interrupts(struct phy_device *phydev)
-{
- int err;
-
- err = phy_clear_interrupt(phydev);
-
- if (err < 0)
- return err;
-
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
- return err;
-}
-
-/* Disable the PHY interrupts from the PHY side */
-int phy_disable_interrupts(struct phy_device *phydev)
-{
- int err;
-
- /* Disable PHY interrupts */
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-
- if (err)
- goto phy_err;
-
- /* Clear the interrupt */
- err = phy_clear_interrupt(phydev);
-
- if (err)
- goto phy_err;
-
- return 0;
-
-phy_err:
- phy_error(phydev);
-
- return err;
-}
-
-/* phy_start_interrupts
- *
- * description: Request the interrupt for the given PHY. If
- * this fails, then we set irq to PHY_POLL.
- * Otherwise, we enable the interrupts in the PHY.
- * Returns 0 on success.
- * This should only be called with a valid IRQ number.
- */
-int phy_start_interrupts(struct phy_device *phydev)
-{
- int err = 0;
-
- INIT_WORK(&phydev->phy_queue, phy_change, phydev);
-
- if (request_irq(phydev->irq, phy_interrupt,
- SA_SHIRQ,
- "phy_interrupt",
- phydev) < 0) {
- printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
- phydev->bus->name,
- phydev->irq);
- phydev->irq = PHY_POLL;
- return 0;
- }
-
- err = phy_enable_interrupts(phydev);
-
- return err;
-}
-EXPORT_SYMBOL(phy_start_interrupts);
-
-int phy_stop_interrupts(struct phy_device *phydev)
-{
- int err;
-
- err = phy_disable_interrupts(phydev);
-
- if (err)
- phy_error(phydev);
-
- free_irq(phydev->irq, phydev);
-
- return err;
-}
-EXPORT_SYMBOL(phy_stop_interrupts);
-
-
-/* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void phy_change(void *data)
-{
- int err;
- struct phy_device *phydev = data;
-
- err = phy_disable_interrupts(phydev);
-
- if (err)
- goto phy_err;
-
- spin_lock(&phydev->lock);
- if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
- phydev->state = PHY_CHANGELINK;
- spin_unlock(&phydev->lock);
-
- enable_irq(phydev->irq);
-
- /* Reenable interrupts */
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
- if (err)
- goto irq_enable_err;
-
- return;
-
-irq_enable_err:
- disable_irq(phydev->irq);
-phy_err:
- phy_error(phydev);
-}
-
-/* Bring down the PHY link, and stop checking the status. */
-void phy_stop(struct phy_device *phydev)
-{
- spin_lock(&phydev->lock);
-
- if (PHY_HALTED == phydev->state)
- goto out_unlock;
-
- if (phydev->irq != PHY_POLL) {
- /* Clear any pending interrupts */
- phy_clear_interrupt(phydev);
-
- /* Disable PHY Interrupts */
- phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
- }
-
- phydev->state = PHY_HALTED;
-
-out_unlock:
- spin_unlock(&phydev->lock);
-}
-
-
-/* phy_start
- *
- * description: Indicates the attached device's readiness to
- * handle PHY-related work. Used during startup to start the
- * PHY, and after a call to phy_stop() to resume operation.
- * Also used to indicate the MDIO bus has cleared an error
- * condition.
- */
-void phy_start(struct phy_device *phydev)
-{
- spin_lock(&phydev->lock);
-
- switch (phydev->state) {
- case PHY_STARTING:
- phydev->state = PHY_PENDING;
- break;
- case PHY_READY:
- phydev->state = PHY_UP;
- break;
- case PHY_HALTED:
- phydev->state = PHY_RESUMING;
- default:
- break;
- }
- spin_unlock(&phydev->lock);
-}
-EXPORT_SYMBOL(phy_stop);
-EXPORT_SYMBOL(phy_start);
-
-/* PHY timer which handles the state machine */
-static void phy_timer(unsigned long data)
-{
- struct phy_device *phydev = (struct phy_device *)data;
- int needs_aneg = 0;
- int err = 0;
-
- spin_lock(&phydev->lock);
-
- if (phydev->adjust_state)
- phydev->adjust_state(phydev->attached_dev);
-
- switch(phydev->state) {
- case PHY_DOWN:
- case PHY_STARTING:
- case PHY_READY:
- case PHY_PENDING:
- break;
- case PHY_UP:
- needs_aneg = 1;
-
- phydev->link_timeout = PHY_AN_TIMEOUT;
-
- break;
- case PHY_AN:
- /* Check if negotiation is done. Break
- * if there's an error */
- err = phy_aneg_done(phydev);
- if (err < 0)
- break;
-
- /* If auto-negotiation is done, we change to
- * either RUNNING, or NOLINK */
- if (err > 0) {
- err = phy_read_status(phydev);
-
- if (err)
- break;
-
- if (phydev->link) {
- phydev->state = PHY_RUNNING;
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-
- } else if (0 == phydev->link_timeout--) {
- /* The counter expired, so either we
- * switch to forced mode, or the
- * magic_aneg bit exists, and we try aneg
- * again */
- if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) {
- int idx;
-
- /* We'll start from the
- * fastest speed, and work
- * our way down */
- idx = phy_find_valid(0,
- phydev->supported);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-
- phydev->autoneg = AUTONEG_DISABLE;
- phydev->state = PHY_FORCING;
- phydev->link_timeout =
- PHY_FORCE_TIMEOUT;
-
- pr_info("Trying %d/%s\n",
- phydev->speed,
- DUPLEX_FULL ==
- phydev->duplex ?
- "FULL" : "HALF");
- }
-
- needs_aneg = 1;
- }
- break;
- case PHY_NOLINK:
- err = phy_read_status(phydev);
-
- if (err)
- break;
-
- if (phydev->link) {
- phydev->state = PHY_RUNNING;
- netif_carrier_on(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- }
- break;
- case PHY_FORCING:
- err = phy_read_status(phydev);
-
- if (err)
- break;
-
- if (phydev->link) {
- phydev->state = PHY_RUNNING;
- netif_carrier_on(phydev->attached_dev);
- } else {
- if (0 == phydev->link_timeout--) {
- phy_force_reduction(phydev);
- needs_aneg = 1;
- }
- }
-
- phydev->adjust_link(phydev->attached_dev);
- break;
- case PHY_RUNNING:
- /* Only register a CHANGE if we are
- * polling */
- if (PHY_POLL == phydev->irq)
- phydev->state = PHY_CHANGELINK;
- break;
- case PHY_CHANGELINK:
- err = phy_read_status(phydev);
-
- if (err)
- break;
-
- if (phydev->link) {
- phydev->state = PHY_RUNNING;
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
- netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-
- if (PHY_POLL != phydev->irq)
- err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
- break;
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
- netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- }
- break;
- case PHY_RESUMING:
-
- err = phy_clear_interrupt(phydev);
-
- if (err)
- break;
-
- err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
-
- if (err)
- break;
-
- if (AUTONEG_ENABLE == phydev->autoneg) {
- err = phy_aneg_done(phydev);
- if (err < 0)
- break;
-
- /* err > 0 if AN is done.
- * Otherwise, it's 0, and we're
- * still waiting for AN */
- if (err > 0) {
- phydev->state = PHY_RUNNING;
- } else {
- phydev->state = PHY_AN;
- phydev->link_timeout = PHY_AN_TIMEOUT;
- }
- } else
- phydev->state = PHY_RUNNING;
- break;
- }
-
- spin_unlock(&phydev->lock);
-
- if (needs_aneg)
- err = phy_start_aneg(phydev);
-
- if (err < 0)
- phy_error(phydev);
-
- mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
-}
-
-#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f0595af4c83..c11138330fe 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,6 +39,19 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
+static int genphy_config_init(struct phy_device *phydev);
+
+static struct phy_driver genphy_driver = {
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic PHY",
+ .config_init = genphy_config_init,
+ .features = 0,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {.owner = THIS_MODULE, },
+};
+
/* get_phy_device
*
* description: Reads the ID registers of the PHY at addr on the
@@ -656,27 +669,32 @@ void phy_driver_unregister(struct phy_driver *drv)
}
EXPORT_SYMBOL(phy_driver_unregister);
-static struct phy_driver genphy_driver = {
- .phy_id = 0xffffffff,
- .phy_id_mask = 0xffffffff,
- .name = "Generic PHY",
- .config_init = genphy_config_init,
- .features = 0,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .driver = {.owner = THIS_MODULE, },
-};
-static int __init genphy_init(void)
+static int __init phy_init(void)
{
- return phy_driver_register(&genphy_driver);
+ int rc;
+ extern int mdio_bus_init(void);
+
+ rc = phy_driver_register(&genphy_driver);
+ if (rc)
+ goto out;
+
+ rc = mdio_bus_init();
+ if (rc)
+ goto out_unreg;
+ return 0;
+
+out_unreg:
+ phy_driver_unregister(&genphy_driver);
+out:
+ return rc;
}
-static void __exit genphy_exit(void)
+static void __exit phy_exit(void)
{
phy_driver_unregister(&genphy_driver);
}
-module_init(genphy_init);
-module_exit(genphy_exit);
+module_init(phy_init);
+module_exit(phy_exit);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3404804dc22..72cb67b66e0 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -374,5 +374,4 @@ int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
extern struct bus_type mdio_bus_type;
-extern struct phy_driver genphy_driver;
#endif /* __PHY_H */