diff options
| -rw-r--r-- | drivers/ide/pci/hpt366.c | 149 |
1 files changed, 29 insertions, 120 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 7534171c2c6..51f40f2db77 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -67,6 +67,10 @@ * - add support for HPT302N and HPT371N clocking (the same as for HPT372N) * - HPT371/N are single channel chips, so avoid touching the primary channel * which exists only virtually (there's no pins for it) + * - fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really + * needed and had many modes over- and underclocked, HPT372 33 MHz table was + * for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was + * really for 50 MHz; switch to using HPT372 tables for HPT374... * <source@mvista.com> * */ @@ -264,26 +268,6 @@ static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = { { 0, 0x06514e57 } }; -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = { - { XFER_UDMA_5, 0x14846231 }, - { XFER_UDMA_4, 0x14886231 }, - { XFER_UDMA_3, 0x148c6231 }, - { XFER_UDMA_2, 0x148c6231 }, - { XFER_UDMA_1, 0x14906231 }, - { XFER_UDMA_0, 0x14986231 }, - - { XFER_MW_DMA_2, 0x26514e21 }, - { XFER_MW_DMA_1, 0x26514e33 }, - { XFER_MW_DMA_0, 0x26514e97 }, - - { XFER_PIO_4, 0x06514e21 }, - { XFER_PIO_3, 0x06514e22 }, - { XFER_PIO_2, 0x06514e33 }, - { XFER_PIO_1, 0x06914e43 }, - { XFER_PIO_0, 0x06914e57 }, - { 0, 0x06514e57 } -}; - /* these are the current (4 sep 2001) timings from highpoint */ static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = { { XFER_UDMA_5, 0x12446231 }, @@ -305,27 +289,6 @@ static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = { { 0, 0x06814ea7 } }; -/* 2x 33MHz timings */ -static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = { - { XFER_UDMA_5, 0x1488e673 }, - { XFER_UDMA_4, 0x1488e673 }, - { XFER_UDMA_3, 0x1498e673 }, - { XFER_UDMA_2, 0x1490e673 }, - { XFER_UDMA_1, 0x1498e677 }, - { XFER_UDMA_0, 0x14a0e73f }, - - { XFER_MW_DMA_2, 0x2480fa73 }, - { XFER_MW_DMA_1, 0x2480fa77 }, - { XFER_MW_DMA_0, 0x2480fb3f }, - - { XFER_PIO_4, 0x0c82be73 }, - { XFER_PIO_3, 0x0c82be95 }, - { XFER_PIO_2, 0x0c82beb7 }, - { XFER_PIO_1, 0x0d02bf37 }, - { XFER_PIO_0, 0x0d02bf5f }, - { 0, 0x0d02bf5f } -}; - static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = { { XFER_UDMA_5, 0x12848242 }, { XFER_UDMA_4, 0x12ac8242 }, @@ -347,27 +310,28 @@ static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = { }; static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = { - { XFER_UDMA_6, 0x1c81dc62 }, - { XFER_UDMA_5, 0x1c6ddc62 }, - { XFER_UDMA_4, 0x1c8ddc62 }, - { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */ - { XFER_UDMA_2, 0x1c91dc62 }, - { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */ - { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */ - - { XFER_MW_DMA_2, 0x2c829262 }, - { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */ - { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */ + { XFER_UDMA_6, 0x12446231 }, /* 0x12646231 ?? */ + { XFER_UDMA_5, 0x12446231 }, + { XFER_UDMA_4, 0x12446231 }, + { XFER_UDMA_3, 0x126c6231 }, + { XFER_UDMA_2, 0x12486231 }, + { XFER_UDMA_1, 0x124c6233 }, + { XFER_UDMA_0, 0x12506297 }, - { XFER_PIO_4, 0x0c829c62 }, - { XFER_PIO_3, 0x0c829c84 }, - { XFER_PIO_2, 0x0c829ca6 }, - { XFER_PIO_1, 0x0d029d26 }, - { XFER_PIO_0, 0x0d029d5e }, - { 0, 0x0d029d5e } + { XFER_MW_DMA_2, 0x22406c31 }, + { XFER_MW_DMA_1, 0x22406c33 }, + { XFER_MW_DMA_0, 0x22406c97 }, + + { XFER_PIO_4, 0x06414e31 }, + { XFER_PIO_3, 0x06414e42 }, + { XFER_PIO_2, 0x06414e53 }, + { XFER_PIO_1, 0x06814e93 }, + { XFER_PIO_0, 0x06814ea7 }, + { 0, 0x06814ea7 } }; static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = { + { XFER_UDMA_6, 0x12848242 }, { XFER_UDMA_5, 0x12848242 }, { XFER_UDMA_4, 0x12ac8242 }, { XFER_UDMA_3, 0x128c8242 }, @@ -389,7 +353,7 @@ static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = { static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = { { XFER_UDMA_6, 0x1c869c62 }, - { XFER_UDMA_5, 0x1cae9c62 }, + { XFER_UDMA_5, 0x1cae9c62 }, /* 0x1c8a9c62 */ { XFER_UDMA_4, 0x1c8a9c62 }, { XFER_UDMA_3, 0x1c8e9c62 }, { XFER_UDMA_2, 0x1c929c62 }, @@ -408,50 +372,6 @@ static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = { { 0, 0x0d029d26 } }; -static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = { - { XFER_UDMA_6, 0x12808242 }, - { XFER_UDMA_5, 0x12848242 }, - { XFER_UDMA_4, 0x12ac8242 }, - { XFER_UDMA_3, 0x128c8242 }, - { XFER_UDMA_2, 0x120c8242 }, - { XFER_UDMA_1, 0x12148254 }, - { XFER_UDMA_0, 0x121882ea }, - - { XFER_MW_DMA_2, 0x22808242 }, - { XFER_MW_DMA_1, 0x22808254 }, - { XFER_MW_DMA_0, 0x228082ea }, - - { XFER_PIO_4, 0x0a81f442 }, - { XFER_PIO_3, 0x0a81f443 }, - { XFER_PIO_2, 0x0a81f454 }, - { XFER_PIO_1, 0x0ac1f465 }, - { XFER_PIO_0, 0x0ac1f48a }, - { 0, 0x06814e93 } -}; - -/* FIXME: 50MHz timings for HPT374 */ - -#if 0 -static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = { - { XFER_UDMA_6, 0x12406231 }, /* checkme */ - { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */ - { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */ - { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */ - { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */ - { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */ - { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */ - { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */ - { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */ - { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */ - { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */ - { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */ - { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */ - { 0, 0x06814ea7 } -}; -#endif - #define HPT366_DEBUG_DRIVE_INFO 0 #define HPT374_ALLOW_ATA133_6 0 #define HPT371_ALLOW_ATA133_6 0 @@ -1211,9 +1131,7 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) pll = F_LOW_PCI_66; if (pll == F_LOW_PCI_33) { - if (info->revision >= 8) - info->speed = thirty_three_base_hpt374; - else if (info->revision >= 5) + if (info->revision >= 5) info->speed = thirty_three_base_hpt372; else if (info->revision >= 4) info->speed = thirty_three_base_hpt370a; @@ -1223,26 +1141,17 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif) } else if (pll == F_LOW_PCI_40) { /* Unsupported */ } else if (pll == F_LOW_PCI_50) { - if (info->revision >= 8) - info->speed = fifty_base_hpt370a; - else if (info->revision >= 5) + if (info->revision >= 5) info->speed = fifty_base_hpt372; - else if (info->revision >= 4) - info->speed = fifty_base_hpt370a; else info->speed = fifty_base_hpt370a; printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n"); } else { - if (info->revision >= 8) { - printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n"); - } - else if (info->revision >= 5) + if (info->revision >= 5) { info->speed = sixty_six_base_hpt372; - else if (info->revision >= 4) - info->speed = sixty_six_base_hpt370a; - else - info->speed = sixty_six_base_hpt370; - printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n"); + printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n"); + } else + printk(KERN_ERR "HPT37x: 66MHz timings not supported.\n"); } } |