diff options
134 files changed, 1724 insertions, 2014 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 508e2a2c986..4cd1a5da80a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -170,11 +170,6 @@ and is between 256 and 4096 characters. It is defined in the file acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA Format: <irq>,<irq>... - acpi_new_pts_ordering [HW,ACPI] - Enforce the ACPI 2.0 ordering of the _PTS control - method wrt putting devices into low power states - default: pre ACPI 2.0 ordering of _PTS - acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 02e56d447a8..c485ee028bd 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -84,9 +84,6 @@ policy-routing.txt - IP policy-based routing ray_cs.txt - Raylink Wireless LAN card driver info. -sk98lin.txt - - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit - Ethernet Adapter family driver info skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt deleted file mode 100644 index 8590a954df1..00000000000 --- a/Documentation/networking/sk98lin.txt +++ /dev/null @@ -1,568 +0,0 @@ -(C)Copyright 1999-2004 Marvell(R). -All rights reserved -=========================================================================== - -sk98lin.txt created 13-Feb-2004 - -Readme File for sk98lin v6.23 -Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX - -This file contains - 1 Overview - 2 Required Files - 3 Installation - 3.1 Driver Installation - 3.2 Inclusion of adapter at system start - 4 Driver Parameters - 4.1 Per-Port Parameters - 4.2 Adapter Parameters - 5 Large Frame Support - 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) - 7 Troubleshooting - -=========================================================================== - - -1 Overview -=========== - -The sk98lin driver supports the Marvell Yukon and SysKonnect -SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has -been tested with Linux on Intel/x86 machines. -*** - - -2 Required Files -================= - -The linux kernel source. -No additional files required. -*** - - -3 Installation -=============== - -It is recommended to download the latest version of the driver from the -SysKonnect web site www.syskonnect.com. If you have downloaded the latest -driver, the Linux kernel has to be patched before the driver can be -installed. For details on how to patch a Linux kernel, refer to the -patch.txt file. - -3.1 Driver Installation ------------------------- - -The following steps describe the actions that are required to install -the driver and to start it manually. These steps should be carried -out for the initial driver setup. Once confirmed to be ok, they can -be included in the system start. - -NOTE 1: To perform the following tasks you need 'root' access. - -NOTE 2: In case of problems, please read the section "Troubleshooting" - below. - -The driver can either be integrated into the kernel or it can be compiled -as a module. Select the appropriate option during the kernel -configuration. - -Compile/use the driver as a module ----------------------------------- -To compile the driver, go to the directory /usr/src/linux and -execute the command "make menuconfig" or "make xconfig" and proceed as -follows: - -To integrate the driver permanently into the kernel, proceed as follows: - -1. Select the menu "Network device support" and then "Ethernet(1000Mbit)" -2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" - with (*) -3. Build a new kernel when the configuration of the above options is - finished. -4. Install the new kernel. -5. Reboot your system. - -To use the driver as a module, proceed as follows: - -1. Enable 'loadable module support' in the kernel. -2. For automatic driver start, enable the 'Kernel module loader'. -3. Select the menu "Network device support" and then "Ethernet(1000Mbit)" -4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" - with (M) -5. Execute the command "make modules". -6. Execute the command "make modules_install". - The appropriate modules will be installed. -7. Reboot your system. - - -Load the module manually ------------------------- -To load the module manually, proceed as follows: - -1. Enter "modprobe sk98lin". -2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in - your computer and you have a /proc file system, execute the command: - "ls /proc/net/sk98lin/" - This should produce an output containing a line with the following - format: - eth0 eth1 ... - which indicates that your adapter has been found and initialized. - - NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx - adapter installed, the adapters will be listed as 'eth0', - 'eth1', 'eth2', etc. - For each adapter, repeat steps 3 and 4 below. - - NOTE 2: If you have other Ethernet adapters installed, your Marvell - Yukon or SysKonnect SK-98xx adapter will be mapped to the - next available number, e.g. 'eth1'. The mapping is executed - automatically. - The module installation message (displayed either in a system - log file or on the console) prints a line for each adapter - found containing the corresponding 'ethX'. - -3. Select an IP address and assign it to the respective adapter by - entering: - ifconfig eth0 <ip-address> - With this command, the adapter is connected to the Ethernet. - - SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter - is now active, the link status LED of the primary port is active and - the link status LED of the secondary port (on dual port adapters) is - blinking (if the ports are connected to a switch or hub). - SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active. - In addition, you will receive a status message on the console stating - "ethX: network connection up using port Y" and showing the selected - connection parameters (x stands for the ethernet device number - (0,1,2, etc), y stands for the port name (A or B)). - - NOTE: If you are in doubt about IP addresses, ask your network - administrator for assistance. - -4. Your adapter should now be fully operational. - Use 'ping <otherstation>' to verify the connection to other computers - on your network. -5. To check the adapter configuration view /proc/net/sk98lin/[devicename]. - For example by executing: - "cat /proc/net/sk98lin/eth0" - -Unload the module ------------------ -To stop and unload the driver modules, proceed as follows: - -1. Execute the command "ifconfig eth0 down". -2. Execute the command "rmmod sk98lin". - -3.2 Inclusion of adapter at system start ------------------------------------------ - -Since a large number of different Linux distributions are -available, we are unable to describe a general installation procedure -for the driver module. -Because the driver is now integrated in the kernel, installation should -be easy, using the standard mechanism of your distribution. -Refer to the distribution's manual for installation of ethernet adapters. - -*** - -4 Driver Parameters -==================== - -Parameters can be set at the command line after the module has been -loaded with the command 'modprobe'. -In some distributions, the configuration tools are able to pass parameters -to the driver module. - -If you use the kernel module loader, you can set driver parameters -in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier). -To set the driver parameters in this file, proceed as follows: - -1. Insert a line of the form : - options sk98lin ... - For "...", the same syntax is required as described for the command - line parameters of modprobe below. -2. To activate the new parameters, either reboot your computer - or - unload and reload the driver. - The syntax of the driver parameters is: - - modprobe sk98lin parameter=value1[,value2[,value3...]] - - where value1 refers to the first adapter, value2 to the second etc. - -NOTE: All parameters are case sensitive. Write them exactly as shown - below. - -Example: -Suppose you have two adapters. You want to set auto-negotiation -on the first adapter to ON and on the second adapter to OFF. -You also want to set DuplexCapabilities on the first adapter -to FULL, and on the second adapter to HALF. -Then, you must enter: - - modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half - -NOTE: The number of adapters that can be configured this way is - limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM). - The current limit is 16. If you happen to install - more adapters, adjust this and recompile. - - -4.1 Per-Port Parameters ------------------------- - -These settings are available for each port on the adapter. -In the following description, '?' stands for the port for -which you set the parameter (A or B). - -Speed ------ -Parameter: Speed_? -Values: 10, 100, 1000, Auto -Default: Auto - -This parameter is used to set the speed capabilities. It is only valid -for the SK-98xx V2.0 copper adapters. -Usually, the speed is negotiated between the two ports during link -establishment. If this fails, a port can be forced to a specific setting -with this parameter. - -Auto-Negotiation ----------------- -Parameter: AutoNeg_? -Values: On, Off, Sense -Default: On - -The "Sense"-mode automatically detects whether the link partner supports -auto-negotiation or not. - -Duplex Capabilities -------------------- -Parameter: DupCap_? -Values: Half, Full, Both -Default: Both - -This parameters is only relevant if auto-negotiation for this port is -not set to "Sense". If auto-negotiation is set to "On", all three values -are possible. If it is set to "Off", only "Full" and "Half" are allowed. -This parameter is useful if your link partner does not support all -possible combinations. - -Flow Control ------------- -Parameter: FlowCtrl_? -Values: Sym, SymOrRem, LocSend, None -Default: SymOrRem - -This parameter can be used to set the flow control capabilities the -port reports during auto-negotiation. It can be set for each port -individually. -Possible modes: - -- Sym = Symmetric: both link partners are allowed to send - PAUSE frames - -- SymOrRem = SymmetricOrRemote: both or only remote partner - are allowed to send PAUSE frames - -- LocSend = LocalSend: only local link partner is allowed - to send PAUSE frames - -- None = no link partner is allowed to send PAUSE frames - -NOTE: This parameter is ignored if auto-negotiation is set to "Off". - -Role in Master-Slave-Negotiation (1000Base-T only) --------------------------------------------------- -Parameter: Role_? -Values: Auto, Master, Slave -Default: Auto - -This parameter is only valid for the SK-9821 and SK-9822 adapters. -For two 1000Base-T ports to communicate, one must take the role of the -master (providing timing information), while the other must be the -slave. Usually, this is negotiated between the two ports during link -establishment. If this fails, a port can be forced to a specific setting -with this parameter. - - -4.2 Adapter Parameters ------------------------ - -Connection Type (SK-98xx V2.0 copper adapters only) ---------------- -Parameter: ConType -Values: Auto, 100FD, 100HD, 10FD, 10HD -Default: Auto - -The parameter 'ConType' is a combination of all five per-port parameters -within one single parameter. This simplifies the configuration of both ports -of an adapter card! The different values of this variable reflect the most -meaningful combinations of port parameters. - -The following table shows the values of 'ConType' and the corresponding -combinations of the per-port parameters: - - ConType | DupCap AutoNeg FlowCtrl Role Speed - ----------+------------------------------------------------------ - Auto | Both On SymOrRem Auto Auto - 100FD | Full Off None Auto (ignored) 100 - 100HD | Half Off None Auto (ignored) 100 - 10FD | Full Off None Auto (ignored) 10 - 10HD | Half Off None Auto (ignored) 10 - -Stating any other port parameter together with this 'ConType' variable -will result in a merged configuration of those settings. This due to -the fact, that the per-port parameters (e.g. Speed_? ) have a higher -priority than the combined variable 'ConType'. - -NOTE: This parameter is always used on both ports of the adapter card. - -Interrupt Moderation --------------------- -Parameter: Moderation -Values: None, Static, Dynamic -Default: None - -Interrupt moderation is employed to limit the maximum number of interrupts -the driver has to serve. That is, one or more interrupts (which indicate any -transmit or receive packet to be processed) are queued until the driver -processes them. When queued interrupts are to be served, is determined by the -'IntsPerSec' parameter, which is explained later below. - -Possible modes: - - -- None - No interrupt moderation is applied on the adapter card. - Therefore, each transmit or receive interrupt is served immediately - as soon as it appears on the interrupt line of the adapter card. - - -- Static - Interrupt moderation is applied on the adapter card. - All transmit and receive interrupts are queued until a complete - moderation interval ends. If such a moderation interval ends, all - queued interrupts are processed in one big bunch without any delay. - The term 'static' reflects the fact, that interrupt moderation is - always enabled, regardless how much network load is currently - passing via a particular interface. In addition, the duration of - the moderation interval has a fixed length that never changes while - the driver is operational. - - -- Dynamic - Interrupt moderation might be applied on the adapter card, - depending on the load of the system. If the driver detects that the - system load is too high, the driver tries to shield the system against - too much network load by enabling interrupt moderation. If - at a later - time - the CPU utilization decreases again (or if the network load is - negligible) the interrupt moderation will automatically be disabled. - -Interrupt moderation should be used when the driver has to handle one or more -interfaces with a high network load, which - as a consequence - leads also to a -high CPU utilization. When moderation is applied in such high network load -situations, CPU load might be reduced by 20-30%. - -NOTE: The drawback of using interrupt moderation is an increase of the round- -trip-time (RTT), due to the queueing and serving of interrupts at dedicated -moderation times. - -Interrupts per second ---------------------- -Parameter: IntsPerSec -Values: 30...40000 (interrupts per second) -Default: 2000 - -This parameter is only used if either static or dynamic interrupt moderation -is used on a network adapter card. Using this parameter if no moderation is -applied will lead to no action performed. - -This parameter determines the length of any interrupt moderation interval. -Assuming that static interrupt moderation is to be used, an 'IntsPerSec' -parameter value of 2000 will lead to an interrupt moderation interval of -500 microseconds. - -NOTE: The duration of the moderation interval is to be chosen with care. -At first glance, selecting a very long duration (e.g. only 100 interrupts per -second) seems to be meaningful, but the increase of packet-processing delay -is tremendous. On the other hand, selecting a very short moderation time might -compensate the use of any moderation being applied. - - -Preferred Port --------------- -Parameter: PrefPort -Values: A, B -Default: A - -This is used to force the preferred port to A or B (on dual-port network -adapters). The preferred port is the one that is used if both are detected -as fully functional. - -RLMT Mode (Redundant Link Management Technology) ------------------------------------------------- -Parameter: RlmtMode -Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet -Default: CheckLinkState - -RLMT monitors the status of the port. If the link of the active port -fails, RLMT switches immediately to the standby link. The virtual link is -maintained as long as at least one 'physical' link is up. - -Possible modes: - - -- CheckLinkState - Check link state only: RLMT uses the link state - reported by the adapter hardware for each individual port to - determine whether a port can be used for all network traffic or - not. - - -- CheckLocalPort - In this mode, RLMT monitors the network path - between the two ports of an adapter by regularly exchanging packets - between them. This mode requires a network configuration in which - the two ports are able to "see" each other (i.e. there must not be - any router between the ports). - - -- CheckSeg - Check local port and segmentation: This mode supports the - same functions as the CheckLocalPort mode and additionally checks - network segmentation between the ports. Therefore, this mode is only - to be used if Gigabit Ethernet switches are installed on the network - that have been configured to use the Spanning Tree protocol. - - -- DualNet - In this mode, ports A and B are used as separate devices. - If you have a dual port adapter, port A will be configured as eth0 - and port B as eth1. Both ports can be used independently with - distinct IP addresses. The preferred port setting is not used. - RLMT is turned off. - -NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations - where a network path between the ports on one adapter exists. - Moreover, they are not designed to work where adapters are connected - back-to-back. -*** - - -5 Large Frame Support -====================== - -The driver supports large frames (also called jumbo frames). Using large -frames can result in an improved throughput if transferring large amounts -of data. -To enable large frames, set the MTU (maximum transfer unit) of the -interface to the desired value (up to 9000), execute the following -command: - ifconfig eth0 mtu 9000 -This will only work if you have two adapters connected back-to-back -or if you use a switch that supports large frames. When using a switch, -it should be configured to allow large frames and auto-negotiation should -be set to OFF. The setting must be configured on all adapters that can be -reached by the large frames. If one adapter is not set to receive large -frames, it will simply drop them. - -You can switch back to the standard ethernet frame size by executing the -following command: - ifconfig eth0 mtu 1500 - -To permanently configure this setting, add a script with the 'ifconfig' -line to the system startup sequence (named something like "S99sk98lin" -in /etc/rc.d/rc2.d). -*** - - -6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) -================================================================== - -The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and -Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. -These features are only available after installation of open source -modules available on the Internet: -For VLAN go to: http://www.candelatech.com/~greear/vlan.html -For Link Aggregation go to: http://www.st.rim.or.jp/~yumo - -NOTE: SysKonnect GmbH does not offer any support for these open source - modules and does not take the responsibility for any kind of - failures or problems arising in connection with these modules. - -NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may - cause problems when unloading the driver. - - -7 Troubleshooting -================== - -If any problems occur during the installation process, check the -following list: - - -Problem: The SK-98xx adapter cannot be found by the driver. -Solution: In /proc/pci search for the following entry: - 'Ethernet controller: SysKonnect SK-98xx ...' - If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has - been found by the system and should be operational. - If this entry does not exist or if the file '/proc/pci' is not - found, there may be a hardware problem or the PCI support may - not be enabled in your kernel. - The adapter can be checked using the diagnostics program which - is available on the SysKonnect web site: - www.syskonnect.com - - Some COMPAQ machines have problems dealing with PCI under Linux. - This problem is described in the 'PCI howto' document - (included in some distributions or available from the - web, e.g. at 'www.linux.org'). - - -Problem: Programs such as 'ifconfig' or 'route' cannot be found or the - error message 'Operation not permitted' is displayed. -Reason: You are not logged in as user 'root'. -Solution: Logout and login as 'root' or change to 'root' via 'su'. - - -Problem: Upon use of the command 'ping <address>' the message - "ping: sendto: Network is unreachable" is displayed. -Reason: Your route is not set correctly. -Solution: If you are using RedHat, you probably forgot to set up the - route in the 'network configuration'. - Check the existing routes with the 'route' command and check - if an entry for 'eth0' exists, and if so, if it is set correctly. - - -Problem: The driver can be started, the adapter is connected to the - network, but you cannot receive or transmit any packets; - e.g. 'ping' does not work. -Reason: There is an incorrect route in your routing table. -Solution: Check the routing table with the command 'route' and read the - manual help pages dealing with routes (enter 'man route'). - -NOTE: Although the 2.2.x kernel versions generate the routing entry - automatically, problems of this kind may occur here as well. We've - come across a situation in which the driver started correctly at - system start, but after the driver has been removed and reloaded, - the route of the adapter's network pointed to the 'dummy0'device - and had to be corrected manually. - - -Problem: Your computer should act as a router between multiple - IP subnetworks (using multiple adapters), but computers in - other subnetworks cannot be reached. -Reason: Either the router's kernel is not configured for IP forwarding - or the routing table and gateway configuration of at least one - computer is not working. - -Problem: Upon driver start, the following error message is displayed: - "eth0: -- ERROR -- - Class: internal Software error - Nr: 0xcc - Msg: SkGeInitPort() cannot init running ports" -Reason: You are using a driver compiled for single processor machines - on a multiprocessor machine with SMP (Symmetric MultiProcessor) - kernel. -Solution: Configure your kernel appropriately and recompile the kernel or - the modules. - - - -If your problem is not listed here, please contact SysKonnect's technical -support for help (linux@syskonnect.de). -When contacting our technical support, please ensure that the following -information is available: -- System Manufacturer and HW Informations (CPU, Memory... ) -- PCI-Boards in your system -- Distribution -- Kernel version -- Driver version -*** - - - -***End of Readme File*** @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 25 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION* diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 53826224148..5fe9588db07 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -120,6 +120,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) time, when they all three were 0. */ bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); + bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); if (!(bits_ld | bits_lp | bits_pd)) return; } @@ -133,14 +134,14 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1); while (bits_lp) { - i = __ffs(bits_pd); + i = __ffs(bits_lp); it8152_irq(IT8152_LP_IRQ(i)); bits_lp &= ~(1 << i); } bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1); while (bits_ld) { - i = __ffs(bits_pd); + i = __ffs(bits_ld); it8152_irq(IT8152_LD_IRQ(i)); bits_ld &= ~(1 << i); } diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 283e14fff99..7e97b737656 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -336,7 +336,7 @@ CALL(sys_mknodat) /* 325 */ CALL(sys_fchownat) CALL(sys_futimesat) - CALL(sys_fstatat64) + CALL(ABI(sys_fstatat64, sys_oabi_fstatat64)) CALL(sys_unlinkat) CALL(sys_renameat) /* 330 */ CALL(sys_linkat) diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index e8b98046895..96ab5f52949 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -25,6 +25,7 @@ * sys_stat64: * sys_lstat64: * sys_fstat64: + * sys_fstatat64: * * struct stat64 has different sizes and some members are shifted * Compatibility wrappers are needed for them and provided below. @@ -169,6 +170,29 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd, return error; } +asmlinkage long sys_oabi_fstatat64(int dfd, + char __user *filename, + struct oldabi_stat64 __user *statbuf, + int flag) +{ + struct kstat stat; + int error = -EINVAL; + + if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0) + goto out; + + if (flag & AT_SYMLINK_NOFOLLOW) + error = vfs_lstat_fd(dfd, filename, &stat); + else + error = vfs_stat_fd(dfd, filename, &stat); + + if (!error) + error = cp_oldabi_stat64(&stat, statbuf); + +out: + return error; +} + struct oabi_flock64 { short l_type; short l_whence; diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 72097dacabd..1c62381f5c2 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -482,10 +482,13 @@ endif # be 16kb aligned or the handling of the current variable will break. # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # -#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o +ifdef CONFIG_SGI_IP28 + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + endif +endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28 -#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index d8df5fdb045..5c0d35d6e22 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS]; /* With some thought, we can probably use the mask to reduce the * size of the table. */ -struct cpu_spec cpu_specs[] = { - { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 }, - { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 }, - { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 }, - { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 }, - { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 }, - { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 }, - { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 }, - { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 }, - { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 }, - { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 }, - { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 }, - { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 }, - { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, - { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, - { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, - { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 }, - { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, +struct cpu_spec cpu_specs[] = { + { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 }, + { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 }, + { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 }, + { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 }, + { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 }, + { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 }, + { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 }, + { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 }, + { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 }, + { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 }, + { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 }, + { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 }, + { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 }, + { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 }, + { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } }; void diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index d885e3848ec..9e4ab80caab 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -57,7 +57,7 @@ void __init plat_mem_setup(void) { struct cpu_spec *sp; char *argptr; - unsigned long prid, cpupll, bclk = 1; + unsigned long prid, cpufreq, bclk = 1; set_cpuspec(); sp = cur_cpu_spec[0]; @@ -65,8 +65,15 @@ void __init plat_mem_setup(void) board_setup(); /* board specific setup */ prid = read_c0_prid(); - cpupll = (au_readl(0xB1900060) & 0x3F) * 12; - printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll); + if (sp->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000; +#else + cpufreq = 396; +#endif + else + cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; + printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); bclk = sp->cpu_bclk; if (bclk) diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index f113b512d7b..e122bbc6cd8 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -209,18 +209,22 @@ unsigned long cal_r4koff(void) while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); au_writel(0, SYS_TOYWRITE); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + } else + no_au1xxx_32khz = 1; - cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * - AU1000_SRC_CLK; - } - else { - /* The 32KHz oscillator isn't running, so assume there - * isn't one and grab the processor speed from the PLL. - * NOTE: some old silicon doesn't allow reading the PLL. - */ + /* + * On early Au1000, sys_cpupll was write-only. Since these + * silicon versions of Au1000 are not sold by AMD, we don't bend + * over backwards trying to determine the frequency. + */ + if (cur_cpu_spec[0]->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpu_speed = CONFIG_SOC_AU1000_FREQUENCY; +#else + cpu_speed = 396000000; +#endif + else cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; - no_au1xxx_32khz = 1; - } mips_hpt_frequency = cpu_speed; // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c index a9237f41933..b2e413e597a 100644 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ b/arch/mips/au1000/xxs1500/board_setup.c @@ -33,11 +33,10 @@ #include <asm/cpu.h> #include <asm/bootinfo.h> #include <asm/irq.h> -#include <asm/keyboard.h> #include <asm/mipsregs.h> #include <asm/reboot.h> #include <asm/pgtable.h> -#include <asm/au1000.h> +#include <asm/mach-au1x00/au1000.h> void board_reset(void) { diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c index 389349295d7..a343da13433 100644 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ b/arch/mips/au1000/xxs1500/irqmap.c @@ -45,7 +45,7 @@ #include <asm/io.h> #include <asm/mipsregs.h> #include <asm/system.h> -#include <asm/au1000.h> +#include <asm/mach-au1x00/au1000.h> struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index abf70d74e9d..3b42cea2e40 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,58 +1,48 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:22 2007 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 08:11:19 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -CONFIG_SIBYTE_BIGSUR=y -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +CONFIG_SIBYTE_BIGSUR=y # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_BCM1x80=y CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_1 is not set @@ -68,9 +58,11 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -81,11 +73,17 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_CEVT_BCM1480=y CONFIG_CSRC_BCM1480=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -93,10 +91,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set @@ -137,14 +131,15 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -152,13 +147,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -171,38 +172,45 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -211,24 +219,33 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -236,12 +253,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -255,6 +270,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -262,23 +278,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +CONFIG_ZONE_DMA32=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -292,7 +304,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -302,7 +313,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -310,10 +320,11 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y @@ -322,41 +333,141 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_IP_VS=m +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_STATE=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,10 +480,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -380,9 +487,21 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,85 +510,70 @@ CONFIG_NETWORK_SECMARK=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y +# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -495,87 +599,196 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_BLK_DEV_TC86C001=m # CONFIG_BLK_DEV_IDE_SWARM is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +CONFIG_SATA_SIL24=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +CONFIG_PATA_SIL680=y +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -585,52 +798,53 @@ CONFIG_SB1250_MAC=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -660,17 +874,16 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_NOZOMI is not set # # Serial drivers @@ -680,39 +893,24 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -736,29 +934,30 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIBYTE=y +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -CONFIG_SENSORS_DS1337=y -CONFIG_SENSORS_DS1374=y +# CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y -CONFIG_SENSORS_PCA9539=y +# CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y +# CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=y +# CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -769,43 +968,49 @@ CONFIG_I2C_DEBUG_CHIP=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -814,104 +1019,73 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # -CONFIG_EXT2_FS=y +CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y # # Pseudo filesystems @@ -923,7 +1097,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -939,14 +1112,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -958,6 +1130,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -965,37 +1138,61 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Distributed Lock Manager -# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1003,8 +1200,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -1014,15 +1211,19 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SB1XXX_CORELIS is not set @@ -1034,23 +1235,22 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_GF128MUL=m @@ -1058,39 +1258,50 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index fc4aa07b6d3..38fa1a194bf 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -15,6 +15,7 @@ #include <asm/time.h> DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); /* * Initialize the PIT timer. diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 9f85d4cecc5..b45a7093ca2 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -157,6 +157,6 @@ void __init time_init(void) { plat_time_init(); - if (mips_clockevent_init() || !cpu_has_mfc0_count_bug()) + if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug()) init_mips_clocksource(); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index eed2dc4273e..39804c584ed 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -262,13 +262,21 @@ void dump_mtregs(void) /* Find some VPE program space */ static void *alloc_progmem(unsigned long len) { + void *addr; + #ifdef CONFIG_MIPS_VPE_LOADER_TOM - /* this means you must tell linux to use less memory than you physically have */ - return pfn_to_kaddr(max_pfn); + /* + * This means you must tell Linux to use less memory than you + * physically have, for example by passing a mem= boot argument. + */ + addr = pfn_to_kaddr(max_pfn); + memset(addr, 0, len); #else - // simple grab some mem for now - return kmalloc(len, GFP_KERNEL); + /* simple grab some mem for now */ + addr = kzalloc(len, GFP_KERNEL); #endif + + return addr; } static void release_progmem(void *ptr) @@ -884,9 +892,10 @@ static int vpe_elfload(struct vpe * v) } v->load_addr = alloc_progmem(mod.core_size); - memset(v->load_addr, 0, mod.core_size); + if (!v->load_addr) + return -ENOMEM; - printk("VPE loader: loading to %p\n", v->load_addr); + pr_info("VPE loader: loading to %p\n", v->load_addr); if (relocate) { for (i = 0; i < hdr->e_shnum; i++) { diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 3a93d4ce270..382738ca8a0 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -307,6 +307,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R12000: case CPU_R14000: case CPU_4KC: + case CPU_4KEC: case CPU_SB1: case CPU_SB1A: case CPU_4KSC: diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index ab68c4318a3..87e2c8f54e2 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = { static struct resource bcm1480_io_resource = { .name = "BCM1480 PCI I/O", - .start = 0x2c000000UL, - .end = 0x2dffffffUL, + .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL, .flags = IORESOURCE_IO, }; @@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = { .pci_ops = &bcm1480_pci_ops, .mem_resource = &bcm1480_mem_resource, .io_resource = &bcm1480_io_resource, + .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, }; @@ -251,6 +252,7 @@ static int __init bcm1480_pcibios_init(void) bcm1480_controller.io_map_base = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536); + bcm1480_controller.io_map_base -= bcm1480_controller.io_offset; set_io_port_base(bcm1480_controller.io_map_base); isa_slot_offset = (unsigned long) ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index 005e7fecab0..f54f45412b0 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = { static struct resource bcm1480ht_io_resource = { .name = "BCM1480 HT I/O", - .start = 0x00000000UL, - .end = 0x01ffffffUL, + .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, + .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL, .flags = IORESOURCE_IO, }; @@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = { .io_resource = &bcm1480ht_io_resource, .index = 1, .get_busno = bcm1480ht_pcibios_get_busno, + .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, }; static int __init bcm1480ht_pcibios_init(void) { - uint32_t cmdreg; - ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); - /* - * See if the PCI bus has been configured by the firmware. - */ - cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), - PCI_COMMAND)); - if (!(cmdreg & PCI_COMMAND_MASTER)) { - printk("HT: Skipping HT probe. Bus is not initialized.\n"); - iounmap(ht_cfg_space); - return 1; /* XXX */ - } + /* CFE doesn't always init all HT paths, so we always scan */ bcm1480ht_bus_status |= PCI_BUS_ENABLED; ht_eoi_space = (unsigned long) ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, 4 * 1024 * 1024); + bcm1480ht_controller.io_map_base = (unsigned long) + ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536); + bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset; register_pci_controller(&bcm1480ht_controller); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 12720489e45..8d2cd1de572 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -72,9 +72,6 @@ config SYS_SUPPORTS_NUMA config SYS_SUPPORTS_PCI bool -config ARCH_MAY_HAVE_PC_FDC - bool - config STACKTRACE_SUPPORT def_bool y diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 3dda24daa0a..89b408620dc 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -44,7 +44,7 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ + -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ $(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c index ff99562456f..5627c0b3ffa 100644 --- a/arch/sh/kernel/cpu/sh2a/fpu.c +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -13,6 +13,7 @@ #include <linux/signal.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/fpu.h> /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 817f9939cda..8020796139f 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -16,6 +16,7 @@ #include <asm/cpu/fpu.h> #include <asm/processor.h> #include <asm/system.h> +#include <asm/fpu.h> /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c index 30b76a94abf..dd4f51ffb50 100644 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -17,6 +17,7 @@ #include <asm/processor.h> #include <asm/user.h> #include <asm/io.h> +#include <asm/fpu.h> /* * Initially load the FPU with signalling NANS. This bit pattern diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c index 4a8a4083ff0..1db7ce0f25d 100644 --- a/arch/sh/kernel/dump_task.c +++ b/arch/sh/kernel/dump_task.c @@ -1,5 +1,6 @@ #include <linux/elfcore.h> #include <linux/sched.h> +#include <asm/fpu.h> /* * Capture the user space registers if the task is not running (in user space) diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 9ab1926b9d1..b98e37a1f54 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -25,6 +25,7 @@ #include <asm/pgalloc.h> #include <asm/system.h> #include <asm/ubc.h> +#include <asm/fpu.h> static int hlt_counter; int ubc_usercnt = 0; diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f6b5fbfe75c..f311551d9a0 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -29,6 +29,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/cacheflush.h> +#include <asm/fpu.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c index b781d3d54fb..756fa24eeef 100644 --- a/arch/sparc64/kernel/iommu.c +++ b/arch/sparc64/kernel/iommu.c @@ -516,9 +516,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist, unsigned long flags, handle, prot, ctx; dma_addr_t dma_next = 0, dma_addr; unsigned int max_seg_size; + unsigned long seg_boundary_size; int outcount, incount, i; struct strbuf *strbuf; struct iommu *iommu; + unsigned long base_shift; BUG_ON(direction == DMA_NONE); @@ -549,8 +551,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist, outs->dma_length = 0; max_seg_size = dma_get_max_seg_size(dev); + seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, + IO_PAGE_SIZE) >> IO_PAGE_SHIFT; + base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT; for_each_sg(sglist, s, nelems, i) { - unsigned long paddr, npages, entry, slen; + unsigned long paddr, npages, entry, out_entry = 0, slen; iopte_t *base; slen = s->length; @@ -593,7 +598,9 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist, * - allocated dma_addr isn't contiguous to previous allocation */ if ((dma_addr != dma_next) || - (outs->dma_length + s->length > max_seg_size)) { + (outs->dma_length + s->length > max_seg_size) || + (is_span_boundary(out_entry, base_shift, + seg_boundary_size, outs, s))) { /* Can't merge: create a new segment */ segstart = s; outcount++; @@ -607,6 +614,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist, /* This is a new segment, fill entries */ outs->dma_address = dma_addr; outs->dma_length = slen; + out_entry = entry; } /* Calculate next page pointer for contiguous check */ diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h index 0713bd58499..f3575a614fa 100644 --- a/arch/sparc64/kernel/iommu_common.h +++ b/arch/sparc64/kernel/iommu_common.h @@ -12,6 +12,7 @@ #include <linux/mm.h> #include <linux/scatterlist.h> #include <linux/device.h> +#include <linux/iommu-helper.h> #include <asm/iommu.h> #include <asm/scatterlist.h> @@ -45,17 +46,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr, return npages; } -static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems) +static inline int is_span_boundary(unsigned long entry, + unsigned long shift, + unsigned long boundary_size, + struct scatterlist *outs, + struct scatterlist *sg) { - unsigned long i, npages = 0; - struct scatterlist *sg; + unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs); + int nr = iommu_num_pages(paddr, outs->dma_length + sg->length); - for_each_sg(sglist, sg, nelems, i) { - unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg); - npages += iommu_num_pages(paddr, sg->length); - } - - return npages; + return iommu_is_span_boundary(entry, nr, shift, boundary_size); } extern unsigned long iommu_range_alloc(struct device *dev, diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index ddca6c6c0b4..01839706bd5 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -335,8 +335,10 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, unsigned long flags, handle, prot; dma_addr_t dma_next = 0, dma_addr; unsigned int max_seg_size; + unsigned long seg_boundary_size; int outcount, incount, i; struct iommu *iommu; + unsigned long base_shift; long err; BUG_ON(direction == DMA_NONE); @@ -362,8 +364,11 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, iommu_batch_start(dev, prot, ~0UL); max_seg_size = dma_get_max_seg_size(dev); + seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, + IO_PAGE_SIZE) >> IO_PAGE_SHIFT; + base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT; for_each_sg(sglist, s, nelems, i) { - unsigned long paddr, npages, entry, slen; + unsigned long paddr, npages, entry, out_entry = 0, slen; slen = s->length; /* Sanity check */ @@ -406,7 +411,9 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, * - allocated dma_addr isn't contiguous to previous allocation */ if ((dma_addr != dma_next) || - (outs->dma_length + s->length > max_seg_size)) { + (outs->dma_length + s->length > max_seg_size) || + (is_span_boundary(out_entry, base_shift, + seg_boundary_size, outs, s))) { /* Can't merge: create a new segment */ segstart = s; outcount++; @@ -420,6 +427,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, /* This is a new segment, fill entries */ outs->dma_address = dma_addr; outs->dma_length = slen; + out_entry = entry; } /* Calculate next page pointer for contiguous check */ diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c index a0f000b293d..ae24919cba7 100644 --- a/arch/sparc64/mm/tlb.c +++ b/arch/sparc64/mm/tlb.c @@ -23,11 +23,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, }; void flush_tlb_pending(void) { - struct mmu_gather *mp; + struct mmu_gather *mp = &get_cpu_var(mmu_gathers); - preempt_disable(); - - mp = &__get_cpu_var(mmu_gathers); if (mp->tlb_nr) { flush_tsb_user(mp); @@ -43,7 +40,7 @@ void flush_tlb_pending(void) mp->tlb_nr = 0; } - preempt_enable(); + put_cpu_var(mmu_gathers); } void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig) diff --git a/block/blk-settings.c b/block/blk-settings.c index 1344a0ea5cc..5713f7e5cbd 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -140,7 +140,7 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr) /* Assume anything <= 4GB can be handled by IOMMU. Actually some IOMMUs can handle everything, but I don't know of a way to test this here. */ - if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) + if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) dma = 1; q->bounce_pfn = max_low_pfn; #else diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0f962ecae91..f26da2bfcc1 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1143,24 +1143,37 @@ static void cfq_put_queue(struct cfq_queue *cfqq) } /* - * Call func for each cic attached to this ioc. Returns number of cic's seen. + * Call func for each cic attached to this ioc. */ -static unsigned int +static void call_for_each_cic(struct io_context *ioc, void (*func)(struct io_context *, struct cfq_io_context *)) { struct cfq_io_context *cic; struct hlist_node *n; - int called = 0; rcu_read_lock(); - hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) { + hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) func(ioc, cic); - called++; - } rcu_read_unlock(); +} + +static void cfq_cic_free_rcu(struct rcu_head *head) +{ + struct cfq_io_context *cic; + + cic = container_of(head, struct cfq_io_context, rcu_head); + + kmem_cache_free(cfq_ioc_pool, cic); + elv_ioc_count_dec(ioc_count); + + if (ioc_gone && !elv_ioc_count_read(ioc_count)) + complete(ioc_gone); +} - return called; +static void cfq_cic_free(struct cfq_io_context *cic) +{ + call_rcu(&cic->rcu_head, cfq_cic_free_rcu); } static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic) @@ -1174,24 +1187,18 @@ static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic) hlist_del_rcu(&cic->cic_list); spin_unlock_irqrestore(&ioc->lock, flags); - kmem_cache_free(cfq_ioc_pool, cic); + cfq_cic_free(cic); } static void cfq_free_io_context(struct io_context *ioc) { - int freed; - /* - * ioc->refcount is zero here, so no more cic's are allowed to be - * linked into this ioc. So it should be ok to iterate over the known - * list, we will see all cic's since no new ones are added. + * ioc->refcount is zero here, or we are called from elv_unregister(), + * so no more cic's are allowed to be linked into this ioc. So it + * should be ok to iterate over the known list, we will see all cic's + * since no new ones are added. */ - freed = call_for_each_cic(ioc, cic_free_func); - - elv_ioc_count_mod(ioc_count, -freed); - - if (ioc_gone && !elv_ioc_count_read(ioc_count)) - complete(ioc_gone); + call_for_each_cic(ioc, cic_free_func); } static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq) @@ -1458,15 +1465,6 @@ cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc, return cfqq; } -static void cfq_cic_free(struct cfq_io_context *cic) -{ - kmem_cache_free(cfq_ioc_pool, cic); - elv_ioc_count_dec(ioc_count); - - if (ioc_gone && !elv_ioc_count_read(ioc_count)) - complete(ioc_gone); -} - /* * We drop cfq io contexts lazily, so we may find a dead one. */ @@ -2138,7 +2136,7 @@ static int __init cfq_slab_setup(void) if (!cfq_pool) goto fail; - cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU); + cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0); if (!cfq_ioc_pool) goto fail; @@ -2286,7 +2284,6 @@ static void __exit cfq_exit(void) smp_wmb(); if (elv_ioc_count_read(ioc_count)) wait_for_completion(ioc_gone); - synchronize_rcu(); cfq_slab_kill(); } diff --git a/crypto/xcbc.c b/crypto/xcbc.c index 2feb0f239c3..b63b633e549 100644 --- a/crypto/xcbc.c +++ b/crypto/xcbc.c @@ -116,13 +116,11 @@ static int crypto_xcbc_digest_update2(struct hash_desc *pdesc, struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent); struct crypto_cipher *tfm = ctx->child; int bs = crypto_hash_blocksize(parent); - unsigned int i = 0; - do { - - struct page *pg = sg_page(&sg[i]); - unsigned int offset = sg[i].offset; - unsigned int slen = sg[i].length; + for (;;) { + struct page *pg = sg_page(sg); + unsigned int offset = sg->offset; + unsigned int slen = sg->length; if (unlikely(slen > nbytes)) slen = nbytes; @@ -182,8 +180,11 @@ static int crypto_xcbc_digest_update2(struct hash_desc *pdesc, offset = 0; pg++; } - i++; - } while (nbytes>0); + + if (!nbytes) + break; + sg = scatterwalk_sg_next(sg); + } return 0; } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index d2f71a54726..71183eea790 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -26,21 +26,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; #ifdef CONFIG_PM_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; -static bool acpi_sleep_finish_wake_up; - -/* - * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we - * allow the user to request that behavior by using the 'acpi_new_pts_ordering' - * kernel command line option that causes the following variable to be set. - */ -static bool new_pts_ordering; - -static int __init acpi_new_pts_ordering(char *str) -{ - new_pts_ordering = true; - return 1; -} -__setup("acpi_new_pts_ordering", acpi_new_pts_ordering); #endif static int acpi_sleep_prepare(u32 acpi_state) @@ -91,14 +76,6 @@ static int acpi_pm_begin(suspend_state_t pm_state) if (sleep_states[acpi_state]) { acpi_target_sleep_state = acpi_state; - if (new_pts_ordering) - return 0; - - error = acpi_sleep_prepare(acpi_state); - if (error) - acpi_target_sleep_state = ACPI_STATE_S0; - else - acpi_sleep_finish_wake_up = true; } else { printk(KERN_ERR "ACPI does not support this state: %d\n", pm_state); @@ -116,14 +93,11 @@ static int acpi_pm_begin(suspend_state_t pm_state) static int acpi_pm_prepare(void) { - if (new_pts_ordering) { - int error = acpi_sleep_prepare(acpi_target_sleep_state); + int error = acpi_sleep_prepare(acpi_target_sleep_state); - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - acpi_sleep_finish_wake_up = true; + if (error) { + acpi_target_sleep_state = ACPI_STATE_S0; + return error; } return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; @@ -212,7 +186,6 @@ static void acpi_pm_finish(void) acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; - acpi_sleep_finish_wake_up = false; #ifdef CONFIG_X86 if (init_8259A_after_S1) { @@ -229,11 +202,10 @@ static void acpi_pm_finish(void) static void acpi_pm_end(void) { /* - * This is necessary in case acpi_pm_finish() is not called directly - * during a failing transition to a sleep state. + * This is necessary in case acpi_pm_finish() is not called during a + * failing transition to a sleep state. */ - if (acpi_sleep_finish_wake_up) - acpi_pm_finish(); + acpi_target_sleep_state = ACPI_STATE_S0; } static int acpi_pm_state_valid(suspend_state_t pm_state) @@ -285,31 +257,18 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #ifdef CONFIG_HIBERNATION static int acpi_hibernation_begin(void) { - int error; - acpi_target_sleep_state = ACPI_STATE_S4; - if (new_pts_ordering) - return 0; - error = acpi_sleep_prepare(ACPI_STATE_S4); - if (error) - acpi_target_sleep_state = ACPI_STATE_S0; - else - acpi_sleep_finish_wake_up = true; - - return error; + return 0; } static int acpi_hibernation_prepare(void) { - if (new_pts_ordering) { - int error = acpi_sleep_prepare(ACPI_STATE_S4); + int error = acpi_sleep_prepare(ACPI_STATE_S4); - if (error) { - acpi_target_sleep_state = ACPI_STATE_S0; - return error; - } - acpi_sleep_finish_wake_up = true; + if (error) { + acpi_target_sleep_state = ACPI_STATE_S0; + return error; } return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT; @@ -353,17 +312,15 @@ static void acpi_hibernation_finish(void) acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; - acpi_sleep_finish_wake_up = false; } static void acpi_hibernation_end(void) { /* * This is necessary in case acpi_hibernation_finish() is not called - * directly during a failing transition to the sleep state. + * during a failing transition to the sleep state. */ - if (acpi_sleep_finish_wake_up) - acpi_hibernation_finish(); + acpi_target_sleep_state = ACPI_STATE_S0; } static int acpi_hibernation_pre_restore(void) diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 47c57a4294b..98099f526d8 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -978,6 +978,7 @@ static int fs_open(struct atm_vcc *atm_vcc) /* Docs are vague about this atm_hdr field. By the way, the FS * chip makes odd errors if lower bits are set.... -- REW */ tc->atm_hdr = (vpi << 20) | (vci << 4); + tmc0 = 0; { int pcr = atm_pcr_goal (txtp); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 2e3395b7e8c..ffc4a5a4194 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -3000,8 +3000,7 @@ he_proc_read(struct atm_dev *dev, loff_t *pos, char *page) /* eeprom routines -- see 4.7 */ -u8 -read_prom_byte(struct he_dev *he_dev, int addr) +static u8 read_prom_byte(struct he_dev *he_dev, int addr) { u32 val = 0, tmp_read = 0; int i, j = 0; diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index b967919fb7e..28d77b5195d 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -2016,8 +2016,7 @@ idt77252_send_skb(struct atm_vcc *vcc, struct sk_buff *skb, int oam) return 0; } -int -idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb) +static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb) { return idt77252_send_skb(vcc, skb, 0); } @@ -3072,8 +3071,7 @@ idt77252_dev_open(struct idt77252_dev *card) return 0; } -void -idt77252_dev_close(struct atm_dev *dev) +static void idt77252_dev_close(struct atm_dev *dev) { struct idt77252_dev *card = dev->dev_data; u32 conf; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index ef52452640e..670c093ed25 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -958,6 +958,7 @@ static void ia_suni_pm7345_init (IADEV *iadev) /***************************** IA_LIB END *****************************/ +#ifdef CONFIG_ATM_IA_DEBUG static int tcnter = 0; static void xdump( u_char* cp, int length, char* prefix ) { @@ -992,6 +993,7 @@ static void xdump( u_char* cp, int length, char* prefix ) } } /* close xdump(... */ +#endif /* CONFIG_ATM_IA_DEBUG */ static struct atm_dev *ia_boards = NULL; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 996d61f0d46..ca6d51efd8b 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -401,7 +401,8 @@ static void ar_context_tasklet(unsigned long data) if (d->res_count == 0) { size_t size, rest, offset; - dma_addr_t buffer_bus; + dma_addr_t start_bus; + void *start; /* * This descriptor is finished and we may have a @@ -410,9 +411,9 @@ static void ar_context_tasklet(unsigned long data) */ offset = offsetof(struct ar_buffer, data); - buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + start = buffer = ab; + start_bus = le32_to_cpu(ab->descriptor.data_address) - offset; - buffer = ab; ab = ab->next; d = &ab->descriptor; size = buffer + PAGE_SIZE - ctx->pointer; @@ -427,7 +428,7 @@ static void ar_context_tasklet(unsigned long data) buffer = handle_ar_packet(ctx, buffer); dma_free_coherent(ohci->card.device, PAGE_SIZE, - buffer, buffer_bus); + start, start_bus); ar_context_add_page(ctx); } else { buffer = ctx->pointer; diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 5c85670e2d1..f942ecdd47c 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1367,7 +1367,8 @@ w83781d_isa_probe(struct platform_device *pdev) /* Reserve the ISA region */ res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, W83781D_EXTENT, "w83781d")) { + if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2, + "w83781d")) { err = -EBUSY; goto exit; } @@ -1415,7 +1416,7 @@ w83781d_isa_probe(struct platform_device *pdev) device_remove_file(&pdev->dev, &dev_attr_name); kfree(data); exit_release_region: - release_region(res->start, W83781D_EXTENT); + release_region(res->start + W83781D_ADDR_REG_OFFSET, 2); exit: return err; } @@ -1429,7 +1430,7 @@ w83781d_isa_remove(struct platform_device *pdev) sysfs_remove_group(&pdev->dev.kobj, &w83781d_group); sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt); device_remove_file(&pdev->dev, &dev_attr_name); - release_region(data->client.addr, W83781D_EXTENT); + release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2); kfree(data); return 0; @@ -1797,8 +1798,17 @@ w83781d_isa_found(unsigned short address) { int val, save, found = 0; - if (!request_region(address, W83781D_EXTENT, "w83781d")) + /* We have to request the region in two parts because some + boards declare base+4 to base+7 as a PNP device */ + if (!request_region(address, 4, "w83781d")) { + pr_debug("w83781d: Failed to request low part of region\n"); return 0; + } + if (!request_region(address + 4, 4, "w83781d")) { + pr_debug("w83781d: Failed to request high part of region\n"); + release_region(address, 4); + return 0; + } #define REALLY_SLOW_IO /* We need the timeouts for at least some W83781D-like @@ -1871,7 +1881,8 @@ w83781d_isa_found(unsigned short address) val == 0x30 ? "W83782D" : "W83781D", (int)address); release: - release_region(address, W83781D_EXTENT); + release_region(address + 4, 4); + release_region(address, 4); return found; } diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c index c36d110b349..7d61a966080 100644 --- a/drivers/input/apm-power.c +++ b/drivers/input/apm-power.c @@ -63,8 +63,6 @@ static int apmpower_connect(struct input_handler *handler, handle->handler = handler; handle->name = "apm-power"; - handler->private = handle; - error = input_register_handle(handle); if (error) { printk(KERN_ERR @@ -87,11 +85,10 @@ static int apmpower_connect(struct input_handler *handler, return 0; } -static void apmpower_disconnect(struct input_handle *handler) +static void apmpower_disconnect(struct input_handle *handle) { - struct input_handle *handle = handler->private; - input_close_device(handle); + input_unregister_handle(handle); kfree(handle); } diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 99562cee827..b32984bc516 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -124,6 +124,7 @@ static void evdev_free(struct device *dev) { struct evdev *evdev = container_of(dev, struct evdev, dev); + input_put_device(evdev->handle.dev); kfree(evdev); } @@ -853,9 +854,6 @@ static void evdev_cleanup(struct evdev *evdev) evdev_hangup(evdev); evdev_remove_chrdev(evdev); - if (evdev->grab) - evdev_ungrab(evdev, evdev->grab); - /* evdev is marked dead so no one else accesses evdev->open */ if (evdev->open) { input_flush_device(handle, NULL); @@ -896,7 +894,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, evdev->exist = 1; evdev->minor = minor; - evdev->handle.dev = dev; + evdev->handle.dev = input_get_device(dev); evdev->handle.name = evdev->name; evdev->handle.handler = handler; evdev->handle.private = evdev; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 22b2789ef58..65d7077a75a 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -171,6 +171,7 @@ static void joydev_free(struct device *dev) { struct joydev *joydev = container_of(dev, struct joydev, dev); + input_put_device(joydev->handle.dev); kfree(joydev); } @@ -750,7 +751,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, joydev->minor = minor; joydev->exist = 1; - joydev->handle.dev = dev; + joydev->handle.dev = input_get_device(dev); joydev->handle.name = joydev->name; joydev->handle.handler = handler; joydev->handle.private = joydev; diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6224c2fb3b6..4e651c11c1d 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -50,9 +50,9 @@ #define KPKDI 0x0048 /* bit definitions */ -#define KPC_MKRN(n) ((((n) & 0x7) - 1) << 26) /* matrix key row number */ -#define KPC_MKCN(n) ((((n) & 0x7) - 1) << 23) /* matrix key column number */ -#define KPC_DKN(n) ((((n) & 0x7) - 1) << 6) /* direct key number */ +#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */ +#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */ +#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */ #define KPC_AS (0x1 << 30) /* Automatic Scan bit */ #define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index bbbe5e81adc..b989748598a 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -414,6 +414,7 @@ static void mousedev_free(struct device *dev) { struct mousedev *mousedev = container_of(dev, struct mousedev, dev); + input_put_device(mousedev->handle.dev); kfree(mousedev); } @@ -865,7 +866,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev, mousedev->minor = minor; mousedev->exist = 1; - mousedev->handle.dev = dev; + mousedev->handle.dev = input_get_device(dev); mousedev->handle.name = mousedev->name; mousedev->handle.handler = handler; mousedev->handle.private = mousedev; diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 6c0a9c4761e..4c0b05852cb 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -49,13 +49,13 @@ static void gpio_led_set(struct led_classdev *led_cdev, if (led_dat->active_low) level = !level; - /* setting GPIOs with I2C/etc requires a preemptible task context */ + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so + * let's just assume the worst. + */ if (led_dat->can_sleep) { - if (preempt_count()) { - led_dat->new_level = level; - schedule_work(&led_dat->work); - } else - gpio_set_value_cansleep(led_dat->gpio, level); + led_dat->new_level = level; + schedule_work(&led_dat->work); } else gpio_set_value(led_dat->gpio, level); } @@ -79,6 +79,10 @@ static int gpio_led_probe(struct platform_device *pdev) cur_led = &pdata->leds[i]; led_dat = &leds_data[i]; + ret = gpio_request(cur_led->gpio, cur_led->name); + if (ret < 0) + goto err; + led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->gpio = cur_led->gpio; @@ -87,10 +91,6 @@ static int gpio_led_probe(struct platform_device *pdev) led_dat->cdev.brightness_set = gpio_led_set; led_dat->cdev.brightness = LED_OFF; - ret = gpio_request(led_dat->gpio, led_dat->cdev.name); - if (ret < 0) - goto err; - gpio_direction_output(led_dat->gpio, led_dat->active_low); INIT_WORK(&led_dat->work, gpio_led_work); diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 34e317ced5a..57b9e3adc8f 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -587,6 +587,8 @@ static struct video_device cadet_radio= .vidioc_s_input = vidioc_s_input, }; +#ifdef CONFIG_PNP + static struct pnp_device_id cadet_pnp_devices[] = { /* ADS Cadet AM/FM Radio Card */ {.id = "MSM0c24", .driver_data = 0}, @@ -621,6 +623,10 @@ static struct pnp_driver cadet_pnp_driver = { .remove = NULL, }; +#else +static struct pnp_driver cadet_pnp_driver; +#endif + static int cadet_probe(void) { static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e}; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a080c149cc6..fcf8f2d208a 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1990,7 +1990,7 @@ static int bttv_g_frequency(struct file *file, void *priv, if (0 != err) return err; - f->type = V4L2_TUNER_ANALOG_TV; + f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; f->frequency = btv->freq; return 0; @@ -2009,7 +2009,8 @@ static int bttv_s_frequency(struct file *file, void *priv, if (unlikely(f->tuner != 0)) return -EINVAL; - if (unlikely(f->type != V4L2_TUNER_ANALOG_TV)) + if (unlikely(f->type != (btv->radio_user + ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV))) return -EINVAL; mutex_lock(&btv->lock); btv->freq = f->frequency; @@ -3415,6 +3416,7 @@ static int radio_open(struct inode *inode, struct file *file) { int minor = iminor(inode); struct bttv *btv = NULL; + struct bttv_fh *fh; unsigned int i; dprintk("bttv: open minor=%d\n",minor); @@ -3429,12 +3431,19 @@ static int radio_open(struct inode *inode, struct file *file) return -ENODEV; dprintk("bttv%d: open called (radio)\n",btv->c.nr); + + /* allocate per filehandle data */ + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + file->private_data = fh; + *fh = btv->init; + v4l2_prio_open(&btv->prio, &fh->prio); + mutex_lock(&btv->lock); btv->radio_user++; - file->private_data = btv; - bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL); audio_input(btv,TVAUDIO_INPUT_RADIO); @@ -3444,7 +3453,8 @@ static int radio_open(struct inode *inode, struct file *file) static int radio_release(struct inode *inode, struct file *file) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; btv->radio_user--; @@ -3508,8 +3518,12 @@ static int radio_enum_input(struct file *file, void *priv, static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { + if (a->index != 0) + return -EINVAL; + memset(a, 0, sizeof(*a)); strcpy(a->name, "Radio"); + return 0; } @@ -3569,7 +3583,8 @@ static int radio_g_input(struct file *filp, void *priv, unsigned int *i) static ssize_t radio_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; cmd.block_count = count/3; cmd.buffer = data; @@ -3583,7 +3598,8 @@ static ssize_t radio_read(struct file *file, char __user *data, static unsigned int radio_poll(struct file *file, poll_table *wait) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = file->private_data; + struct bttv *btv = fh->btv; struct rds_command cmd; cmd.instance = file; cmd.event_list = wait; @@ -3599,6 +3615,7 @@ static const struct file_operations radio_fops = .open = radio_open, .read = radio_read, .release = radio_release, + .compat_ioctl = v4l_compat_ioctl32, .ioctl = video_ioctl2, .llseek = no_llseek, .poll = radio_poll, diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 2d414dad5c3..dfa269838e0 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -232,6 +232,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */ case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */ + case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ break; @@ -347,10 +348,13 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0x80); + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: if (dev->i2c_bus[0].i2c_rc == 0) - hauppauge_eeprom(dev, eeprom+0x80); + hauppauge_eeprom(dev, eeprom+0xc0); break; } diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 8e40c7bcc06..7f10b273598 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -56,137 +56,6 @@ LIST_HEAD(cx23885_devlist); #define NO_SYNC_LINE (-1U) -/* - * CX23885 Assumptions - * 1 line = 16 bytes of CDT - * cmds size = 80 - * cdt size = 16 * linesize - * iqsize = 64 - * maxlines = 6 - * - * Address Space: - * 0x00000000 0x00008fff FIFO clusters - * 0x00010000 0x000104af Channel Management Data Structures - * 0x000104b0 0x000104ff Free - * 0x00010500 0x000108bf 15 channels * iqsize - * 0x000108c0 0x000108ff Free - * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables - * 15 channels * (iqsize + (maxlines * linesize)) - * 0x00010ea0 0x00010xxx Free - */ - -static struct sram_channel cx23885_sram_channels[] = { - [SRAM_CH01] = { - .name = "VID A", - .cmds_start = 0x10000, - .ctrl_start = 0x105b0, - .cdt = 0x107b0, - .fifo_start = 0x40, - .fifo_size = 0x2800, - .ptr1_reg = DMA1_PTR1, - .ptr2_reg = DMA1_PTR2, - .cnt1_reg = DMA1_CNT1, - .cnt2_reg = DMA1_CNT2, - .jumponly = 1, - }, - [SRAM_CH02] = { - .name = "ch2", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA2_PTR1, - .ptr2_reg = DMA2_PTR2, - .cnt1_reg = DMA2_CNT1, - .cnt2_reg = DMA2_CNT2, - }, - [SRAM_CH03] = { - .name = "TS1 B", - .cmds_start = 0x100A0, - .ctrl_start = 0x10630, - .cdt = 0x10870, - .fifo_start = 0x5000, - .fifo_size = 0x1000, - .ptr1_reg = DMA3_PTR1, - .ptr2_reg = DMA3_PTR2, - .cnt1_reg = DMA3_CNT1, - .cnt2_reg = DMA3_CNT2, - }, - [SRAM_CH04] = { - .name = "ch4", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA4_PTR1, - .ptr2_reg = DMA4_PTR2, - .cnt1_reg = DMA4_CNT1, - .cnt2_reg = DMA4_CNT2, - }, - [SRAM_CH05] = { - .name = "ch5", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA5_PTR1, - .ptr2_reg = DMA5_PTR2, - .cnt1_reg = DMA5_CNT1, - .cnt2_reg = DMA5_CNT2, - }, - [SRAM_CH06] = { - .name = "TS2 C", - .cmds_start = 0x10140, - .ctrl_start = 0x10680, - .cdt = 0x108d0, - .fifo_start = 0x6000, - .fifo_size = 0x1000, - .ptr1_reg = DMA5_PTR1, - .ptr2_reg = DMA5_PTR2, - .cnt1_reg = DMA5_CNT1, - .cnt2_reg = DMA5_CNT2, - }, - [SRAM_CH07] = { - .name = "ch7", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA6_PTR1, - .ptr2_reg = DMA6_PTR2, - .cnt1_reg = DMA6_CNT1, - .cnt2_reg = DMA6_CNT2, - }, - [SRAM_CH08] = { - .name = "ch8", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA7_PTR1, - .ptr2_reg = DMA7_PTR2, - .cnt1_reg = DMA7_CNT1, - .cnt2_reg = DMA7_CNT2, - }, - [SRAM_CH09] = { - .name = "ch9", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, - .ptr1_reg = DMA8_PTR1, - .ptr2_reg = DMA8_PTR2, - .cnt1_reg = DMA8_CNT1, - .cnt2_reg = DMA8_CNT2, - }, -}; - /* FIXME, these allocations will change when * analog arrives. The be reviewed. * CX23887 Assumptions @@ -754,6 +623,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) atomic_inc(&dev->refcount); dev->nr = cx23885_devcount++; + dev->sram_channels = cx23887_sram_channels; sprintf(dev->name, "cx23885[%d]", dev->nr); mutex_lock(&devlist); @@ -763,13 +633,11 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) /* Configure the internal memory */ if(dev->pci->device == 0x8880) { dev->bridge = CX23885_BRIDGE_887; - dev->sram_channels = cx23887_sram_channels; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 25000000; } else if(dev->pci->device == 0x8852) { dev->bridge = CX23885_BRIDGE_885; - dev->sram_channels = cx23885_sram_channels; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 28000000; } else diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c index a545dcaf857..0e4549922f2 100644 --- a/drivers/media/video/v4l2-int-device.c +++ b/drivers/media/video/v4l2-int-device.c @@ -156,3 +156,5 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg); } + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fe7b5ec0970..3a0b20afec7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2635,7 +2635,7 @@ config NIU config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC64 && PCI + depends on PPC_PASEMI && PCI select PHYLIB select INET_LRO help diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index c993a32b3f5..26b2dd5016c 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -575,7 +575,6 @@ adjust_head: static int bf537mac_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct bf537mac_local *lp = netdev_priv(dev); unsigned int data; current_tx_ptr->skb = skb; @@ -634,7 +633,6 @@ out: static void bf537mac_rx(struct net_device *dev) { struct sk_buff *skb, *new_skb; - struct bf537mac_local *lp = netdev_priv(dev); unsigned short len; /* allocate a new skb for next time receive */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 90a1f31e8e6..979c2d05ff9 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -341,6 +341,7 @@ static ssize_t bonding_store_slaves(struct device *d, if (command[0] == '-') { dev = NULL; + original_mtu = 0; bond_for_each_slave(bond, slave, i) if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { dev = slave->dev; diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 6f7e3fde9e7..980c2c229a7 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1854,6 +1854,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) struct ring_desc* start_tx; struct ring_desc* prev_tx; struct nv_skb_map* prev_tx_ctx; + unsigned long flags; /* add fragments to entries count */ for (i = 0; i < fragments; i++) { @@ -1863,10 +1864,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) empty_slots = nv_get_empty_tx_slots(np); if (unlikely(empty_slots <= entries)) { - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); netif_stop_queue(dev); np->tx_stop = 1; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); return NETDEV_TX_BUSY; } @@ -1929,13 +1930,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ? NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0; - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); /* set tx flags */ start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); np->put_tx.orig = put_tx; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n", dev->name, entries, tx_flags_extra); @@ -1971,6 +1972,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) struct ring_desc_ex* prev_tx; struct nv_skb_map* prev_tx_ctx; struct nv_skb_map* start_tx_ctx; + unsigned long flags; /* add fragments to entries count */ for (i = 0; i < fragments; i++) { @@ -1980,10 +1982,10 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) empty_slots = nv_get_empty_tx_slots(np); if (unlikely(empty_slots <= entries)) { - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); netif_stop_queue(dev); np->tx_stop = 1; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); return NETDEV_TX_BUSY; } @@ -2059,7 +2061,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) start_tx->txvlan = 0; } - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); if (np->tx_limit) { /* Limit the number of outstanding tx. Setup all fragments, but @@ -2085,7 +2087,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); np->put_tx.ex = put_tx; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n", dev->name, entries, tx_flags_extra); diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 0789802d59e..378a2396349 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1242,8 +1242,8 @@ static int emac_close(struct net_device *ndev) static inline u16 emac_tx_csum(struct emac_instance *dev, struct sk_buff *skb) { - if (emac_has_feature(dev, EMAC_FTR_HAS_TAH && - skb->ip_summed == CHECKSUM_PARTIAL)) { + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && + (skb->ip_summed == CHECKSUM_PARTIAL)) { ++dev->stats.tx_packets_csum; return EMAC_TX_CTRL_TAH_CSUM; } diff --git a/drivers/net/plip.c b/drivers/net/plip.c index fee3d7b1feb..1e965427b0e 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -903,17 +903,18 @@ plip_interrupt(void *dev_id) struct net_local *nl; struct plip_local *rcv; unsigned char c0; + unsigned long flags; nl = netdev_priv(dev); rcv = &nl->rcv_data; - spin_lock_irq (&nl->lock); + spin_lock_irqsave (&nl->lock, flags); c0 = read_status(dev); if ((c0 & 0xf8) != 0xc0) { if ((dev->irq != -1) && (net_debug > 1)) printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name); - spin_unlock_irq (&nl->lock); + spin_unlock_irqrestore (&nl->lock, flags); return; } @@ -942,7 +943,7 @@ plip_interrupt(void *dev_id) break; } - spin_unlock_irq(&nl->lock); + spin_unlock_irqrestore(&nl->lock, flags); } static int diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 3c915b82e19..c082cf0b1ac 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -84,7 +84,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.15-2" +#define DRV_VERSION "2.0.26.20" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 54c662690f6..853bce0ac47 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4329,10 +4329,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) if (!hw) return 0; + del_timer_sync(&hw->watchdog_timer); + cancel_work_sync(&hw->restart_work); + for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; struct sky2_port *sky2 = netdev_priv(dev); + netif_device_detach(dev); if (netif_running(dev)) sky2_down(dev); @@ -4383,6 +4387,8 @@ static int sky2_resume(struct pci_dev *pdev) for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; + + netif_device_attach(dev); if (netif_running(dev)) { err = sky2_up(dev); if (err) { diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 206918bad53..da2206f6021 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -343,6 +343,12 @@ int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_l void __iomem *ee_addr = tp->base_addr + CSR9; int read_cmd = location | (EE_READ_CMD << addr_len); + /* If location is past the end of what we can address, don't + * read some other location (ie truncate). Just return zero. + */ + if (location > (1 << addr_len) - 1) + return 0; + iowrite32(EE_ENB & ~EE_CS, ee_addr); iowrite32(EE_ENB, ee_addr); diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index ed600bf56e7..82f404b76d8 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1437,6 +1437,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, EEPROM. */ ee_data = tp->eeprom; + memset(ee_data, 0, sizeof(tp->eeprom)); sum = 0; if (chip_idx == LC82C168) { for (i = 0; i < 3; i++) { @@ -1458,8 +1459,12 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, /* A serial EEPROM interface, we read now and sort it out later. */ int sa_offset = 0; int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6; + int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16); - for (i = 0; i < sizeof(tp->eeprom); i+=2) { + if (ee_max_addr > sizeof(tp->eeprom)) + ee_max_addr = sizeof(tp->eeprom); + + for (i = 0; i < ee_max_addr ; i += sizeof(u16)) { u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size); ee_data[i] = data & 0xff; ee_data[i + 1] = data >> 8; diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index a12c9c41b21..0604f3faf04 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -129,7 +129,7 @@ config USB_USBNET config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" - depends on USB_USBNET && NET_ETHERNET + depends on USB_USBNET select CRC32 default y help diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 0343b00cf1f..01660f68943 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -354,7 +354,7 @@ static void dm9601_set_multicast(struct net_device *net) struct dev_mc_list *mc_list = net->mc_list; int i; - for (i = 0; i < net->mc_count; i++) { + for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) { u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26; hashes[crc >> 3] |= 1 << (crc & 0x7); } diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index d1ed68a11e7..b588c890ea7 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1128,12 +1128,8 @@ pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { pegasus_t *pegasus; - if (in_atomic()) - return 0; - pegasus = netdev_priv(dev); mii_ethtool_gset(&pegasus->mii, ecmd); - return 0; } diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index fb37b809523..824df3b5ea4 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -58,7 +58,7 @@ struct lapbethdev { struct net_device_stats stats; /* some statistics */ }; -static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices); +static LIST_HEAD(lapbeth_devices); /* ------------------------------------------------------------------------ */ diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index cfbc1a26f60..948eb1fe916 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -619,6 +619,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, } if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { + b43err(ring->dev->wl, "RX DMA buffer allocation failed\n"); dev_kfree_skb_any(skb); return -EIO; } @@ -874,8 +875,12 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, - b43_txhdr_size(dev), 1)) + b43_txhdr_size(dev), 1)) { + + b43err(dev->wl, + "TXHDR DMA allocation failed\n"); goto err_kfree_txhdr_cache; + } } dma_unmap_single(dev->dev->dev, diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index b79a6bd5396..371e4a11951 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -91,6 +91,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.ConfigBase = parse.config.base; dev->conf.Present = parse.config.rmask[0]; + dev->conf.Attributes = CONF_ENABLE_IRQ; + dev->conf.IntType = INT_MEMORY_AND_IO; dev->io.BasePort2 = 0; dev->io.NumPorts2 = 0; @@ -112,8 +114,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (res != CS_SUCCESS) goto err_disable; - dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED; - dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID; + dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; + dev->irq.IRQInfo1 = IRQ_LEVEL_ID; dev->irq.Handler = NULL; /* The handler is registered later. */ dev->irq.Instance = NULL; res = pcmcia_request_irq(dev, &dev->irq); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index d727de8b96f..65767570be6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -4589,7 +4589,7 @@ static u8 iwl4965_is_fat_tx_allowed(struct iwl4965_priv *priv, if (sta_ht_inf) { if ((!sta_ht_inf->ht_supported) || - (!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)) + (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))) return 0; } diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 5a9cadb9750..038c66a98f1 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -677,9 +677,7 @@ sbi_get_int_status_exit: /* Card has a command result for us */ if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) { - spin_lock(&priv->driver_lock); ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len); - spin_unlock(&priv->driver_lock); if (ret < 0) lbs_pr_err("could not receive cmd from card\n"); } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index bd305f7f3ef..e873a39fcce 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1393,11 +1393,20 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) exit: /* - * Set device mode to sleep for power management. + * Set device mode to sleep for power management, + * on some hardware this call seems to consistently fail. + * From the specifications it is hard to tell why it fails, + * and if this is a "bad thing". + * Overall it is safe to just ignore the failure and + * continue suspending. The only downside is that the + * device will not be in optimal power save mode, but with + * the radio and the other components already disabled the + * device is as good as disabled. */ retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); if (retval) - return retval; + WARNING(rt2x00dev, "Device failed to enter sleep state, " + "continue suspending.\n"); return 0; } diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 880c78bff0e..ed7e0a1fc34 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -218,18 +218,24 @@ int scsi_add_host(struct Scsi_Host *shost, struct device *dev) get_device(&shost->shost_gendev); - if (shost->transportt->host_size && - (shost->shost_data = kzalloc(shost->transportt->host_size, - GFP_KERNEL)) == NULL) - goto out_del_classdev; + if (shost->transportt->host_size) { + shost->shost_data = kzalloc(shost->transportt->host_size, + GFP_KERNEL); + if (shost->shost_data == NULL) { + error = -ENOMEM; + goto out_del_classdev; + } + } if (shost->transportt->create_work_queue) { snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d", shost->host_no); shost->work_q = create_singlethread_workqueue( shost->work_q_name); - if (!shost->work_q) + if (!shost->work_q) { + error = -EINVAL; goto out_free_shost_data; + } } error = scsi_sysfs_add_host(shost); diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 31b9af22424..709a6f75ca9 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -295,11 +295,14 @@ static void sas_discover_domain(struct work_struct *work) case FANOUT_DEV: error = sas_discover_root_expander(dev); break; -#ifdef CONFIG_SCSI_SAS_ATA case SATA_DEV: case SATA_PM: +#ifdef CONFIG_SCSI_SAS_ATA error = sas_discover_sata(dev); break; +#else + SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n"); + /* Fall through */ #endif default: error = -ENXIO; diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c index 5ec0665b3a3..e55b9037adb 100644 --- a/drivers/scsi/mvsas.c +++ b/drivers/scsi/mvsas.c @@ -37,11 +37,13 @@ #include <linux/dma-mapping.h> #include <linux/ctype.h> #include <scsi/libsas.h> +#include <scsi/scsi_tcq.h> +#include <scsi/sas_ata.h> #include <asm/io.h> #define DRV_NAME "mvsas" -#define DRV_VERSION "0.5.1" -#define _MV_DUMP 0 +#define DRV_VERSION "0.5.2" +#define _MV_DUMP 0 #define MVS_DISABLE_NVRAM #define MVS_DISABLE_MSI @@ -52,7 +54,7 @@ readl(regs + MVS_##reg); \ } while (0) -#define MVS_ID_NOT_MAPPED 0xff +#define MVS_ID_NOT_MAPPED 0x7f #define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width) /* offset for D2H FIS in the Received FIS List Structure */ @@ -84,6 +86,7 @@ enum driver_configuration { MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */ MVS_QUEUE_SIZE = 30, /* Support Queue depth */ + MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */ }; /* unchangeable hardware details */ @@ -358,7 +361,20 @@ enum hw_register_bits { /* VSR */ /* PHYMODE 6 (CDB) */ - PHY_MODE6_DTL_SPEED = (1U << 27), + PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */ + PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */ + PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/ + PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */ + PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */ + PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */ + PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */ + PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */ + PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */ + PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */ + PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */ + PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */ + PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */ + PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */ }; enum mvs_info_flags { @@ -511,7 +527,43 @@ enum status_buffer { }; enum error_info_rec { - CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */ + CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */ + CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */ + RSP_OVER = (1U << 29), /* rsp buffer overflow */ + RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */ + UNK_FIS = (1U << 27), /* unknown FIS */ + DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */ + SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */ + TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */ + R_ERR = (1U << 23), /* SATA returned R_ERR prim */ + RD_OFS = (1U << 20), /* Read DATA frame invalid offset */ + XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */ + UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */ + DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */ + INTERLOCK = (1U << 15), /* interlock error */ + NAK = (1U << 14), /* NAK rx'd */ + ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */ + CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */ + OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */ + PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */ + NO_DEST = (1U << 9), /* I_T nexus lost, no destination */ + STP_RES_BSY = (1U << 8), /* STP resources busy */ + BREAK = (1U << 7), /* break received */ + BAD_DEST = (1U << 6), /* bad destination */ + BAD_PROTO = (1U << 5), /* protocol not supported */ + BAD_RATE = (1U << 4), /* cxn rate not supported */ + WRONG_DEST = (1U << 3), /* wrong destination error */ + CREDIT_TO = (1U << 2), /* credit timeout */ + WDOG_TO = (1U << 1), /* watchdog timeout */ + BUF_PAR = (1U << 0), /* buffer parity error */ +}; + +enum error_info_rec_2 { + SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */ + GRD_CHK_ERR = (1U << 14), /* Guard Check Error */ + APP_CHK_ERR = (1U << 13), /* Application Check error */ + REF_CHK_ERR = (1U << 12), /* Reference Check Error */ + USR_BLK_NM = (1U << 0), /* User Block Number */ }; struct mvs_chip_info { @@ -543,28 +595,12 @@ struct mvs_cmd_hdr { __le32 reserved[4]; }; -struct mvs_slot_info { - struct sas_task *task; - u32 n_elem; - u32 tx; - - /* DMA buffer for storing cmd tbl, open addr frame, status buffer, - * and PRD table - */ - void *buf; - dma_addr_t buf_dma; -#if _MV_DUMP - u32 cmd_size; -#endif - - void *response; -}; - struct mvs_port { struct asd_sas_port sas_port; u8 port_attached; u8 taskfileset; u8 wide_port_phymap; + struct list_head list; }; struct mvs_phy { @@ -582,6 +618,27 @@ struct mvs_phy { u32 frame_rcvd_size; u8 frame_rcvd[32]; u8 phy_attached; + enum sas_linkrate minimum_linkrate; + enum sas_linkrate maximum_linkrate; +}; + +struct mvs_slot_info { + struct list_head list; + struct sas_task *task; + u32 n_elem; + u32 tx; + + /* DMA buffer for storing cmd tbl, open addr frame, status buffer, + * and PRD table + */ + void *buf; + dma_addr_t buf_dma; +#if _MV_DUMP + u32 cmd_size; +#endif + + void *response; + struct mvs_port *port; }; struct mvs_info { @@ -612,21 +669,14 @@ struct mvs_info { const struct mvs_chip_info *chip; - unsigned long tags[MVS_SLOTS]; + u8 tags[MVS_SLOTS]; struct mvs_slot_info slot_info[MVS_SLOTS]; /* further per-slot information */ struct mvs_phy phy[MVS_MAX_PHYS]; struct mvs_port port[MVS_MAX_PHYS]; - - u32 can_queue; /* per adapter */ - u32 tag_out; /*Get*/ - u32 tag_in; /*Give*/ -}; - -struct mvs_queue_task { - struct list_head list; - - void *uldd_task; +#ifdef MVS_USE_TASKLET + struct tasklet_struct tasklet; +#endif }; static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, @@ -641,10 +691,11 @@ static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port); static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i); static void mvs_detect_porttype(struct mvs_info *mvi, int i); static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st); +static void mvs_release_task(struct mvs_info *mvi, int phy_no); static int mvs_scan_finished(struct Scsi_Host *, unsigned long); static void mvs_scan_start(struct Scsi_Host *); -static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev); +static int mvs_slave_configure(struct scsi_device *sdev); static struct scsi_transport_template *mvs_stt; @@ -659,7 +710,7 @@ static struct scsi_host_template mvs_sht = { .name = DRV_NAME, .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, - .slave_configure = sas_slave_configure, + .slave_configure = mvs_slave_configure, .slave_destroy = sas_slave_destroy, .scan_finished = mvs_scan_finished, .scan_start = mvs_scan_start, @@ -674,7 +725,7 @@ static struct scsi_host_template mvs_sht = { .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, - .slave_alloc = mvs_sas_slave_alloc, + .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, }; @@ -709,10 +760,10 @@ static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr) printk("\n"); } +#if _MV_DUMP static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag, enum sas_protocol proto) { -#if _MV_DUMP u32 offset; struct pci_dev *pdev = mvi->pdev; struct mvs_slot_info *slot = &mvi->slot_info[tag]; @@ -723,14 +774,14 @@ static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag, tag); mvs_hexdump(32, (u8 *) slot->response, (u32) slot->buf_dma + offset); -#endif } +#endif static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag, enum sas_protocol proto) { #if _MV_DUMP - u32 sz, w_ptr, r_ptr; + u32 sz, w_ptr; u64 addr; void __iomem *regs = mvi->regs; struct pci_dev *pdev = mvi->pdev; @@ -738,12 +789,10 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag, /*Delivery Queue */ sz = mr32(TX_CFG) & TX_RING_SZ_MASK; - w_ptr = mr32(TX_PROD_IDX) & TX_RING_SZ_MASK; - r_ptr = mr32(TX_CONS_IDX) & TX_RING_SZ_MASK; + w_ptr = slot->tx; addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO); dev_printk(KERN_DEBUG, &pdev->dev, - "Delivery Queue Size=%04d , WRT_PTR=%04X , RD_PTR=%04X\n", - sz, w_ptr, r_ptr); + "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr); dev_printk(KERN_DEBUG, &pdev->dev, "Delivery Queue Base Address=0x%llX (PA)" "(tx_dma=0x%llX), Entry=%04d\n", @@ -751,11 +800,11 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag, mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]), (u32) mvi->tx_dma + sizeof(u32) * w_ptr); /*Command List */ - addr = mr32(CMD_LIST_HI) << 16 << 16 | mr32(CMD_LIST_LO); + addr = mvi->slot_dma; dev_printk(KERN_DEBUG, &pdev->dev, "Command List Base Address=0x%llX (PA)" "(slot_dma=0x%llX), Header=%03d\n", - addr, mvi->slot_dma, tag); + addr, slot->buf_dma, tag); dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag); /*mvs_cmd_hdr */ mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]), @@ -779,7 +828,7 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag, static void mvs_hba_cq_dump(struct mvs_info *mvi) { -#if _MV_DUMP +#if (_MV_DUMP > 2) u64 addr; void __iomem *regs = mvi->regs; struct pci_dev *pdev = mvi->pdev; @@ -788,8 +837,8 @@ static void mvs_hba_cq_dump(struct mvs_info *mvi) /*Completion Queue */ addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO); - dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%08X\n", - (u32) mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task); + dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n", + mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task); dev_printk(KERN_DEBUG, &pdev->dev, "Completion List Base Address=0x%llX (PA), " "CQ_Entry=%04d, CQ_WP=0x%08X\n", @@ -854,34 +903,53 @@ static int pci_go_64(struct pci_dev *pdev) return rc; } +static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag) +{ + if (task->lldd_task) { + struct mvs_slot_info *slot; + slot = (struct mvs_slot_info *) task->lldd_task; + *tag = slot - mvi->slot_info; + return 1; + } + return 0; +} + static void mvs_tag_clear(struct mvs_info *mvi, u32 tag) { - mvi->tag_in = (mvi->tag_in + 1) & (MVS_SLOTS - 1); - mvi->tags[mvi->tag_in] = tag; + void *bitmap = (void *) &mvi->tags; + clear_bit(tag, bitmap); } static void mvs_tag_free(struct mvs_info *mvi, u32 tag) { - mvi->tag_out = (mvi->tag_out - 1) & (MVS_SLOTS - 1); + mvs_tag_clear(mvi, tag); +} + +static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag) +{ + void *bitmap = (void *) &mvi->tags; + set_bit(tag, bitmap); } static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out) { - if (mvi->tag_out != mvi->tag_in) { - *tag_out = mvi->tags[mvi->tag_out]; - mvi->tag_out = (mvi->tag_out + 1) & (MVS_SLOTS - 1); - return 0; - } - return -EBUSY; + unsigned int index, tag; + void *bitmap = (void *) &mvi->tags; + + index = find_first_zero_bit(bitmap, MVS_SLOTS); + tag = index; + if (tag >= MVS_SLOTS) + return -SAS_QUEUE_FULL; + mvs_tag_set(mvi, tag); + *tag_out = tag; + return 0; } static void mvs_tag_init(struct mvs_info *mvi) { int i; for (i = 0; i < MVS_SLOTS; ++i) - mvi->tags[i] = i; - mvi->tag_out = 0; - mvi->tag_in = MVS_SLOTS - 1; + mvs_tag_clear(mvi, i); } #ifndef MVS_DISABLE_NVRAM @@ -1013,10 +1081,21 @@ err_out: static void mvs_bytes_dmaed(struct mvs_info *mvi, int i) { struct mvs_phy *phy = &mvi->phy[i]; + struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i]; if (!phy->phy_attached) return; + if (sas_phy->phy) { + struct sas_phy *sphy = sas_phy->phy; + + sphy->negotiated_linkrate = sas_phy->linkrate; + sphy->minimum_linkrate = phy->minimum_linkrate; + sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + sphy->maximum_linkrate = phy->maximum_linkrate; + sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + } + if (phy->phy_type & PORT_TYPE_SAS) { struct sas_identify_frame *id; @@ -1053,80 +1132,149 @@ static void mvs_scan_start(struct Scsi_Host *shost) } } -static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev) +static int mvs_slave_configure(struct scsi_device *sdev) { - int rc; + struct domain_device *dev = sdev_to_domain_dev(sdev); + int ret = sas_slave_configure(sdev); - rc = sas_slave_alloc(scsi_dev); + if (ret) + return ret; - return rc; + if (dev_is_sata(dev)) { + /* struct ata_port *ap = dev->sata_dev.ap; */ + /* struct ata_device *adev = ap->link.device; */ + + /* clamp at no NCQ for the time being */ + /* adev->flags |= ATA_DFLAG_NCQ_OFF; */ + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1); + } + return 0; } -static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events) +static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events) { struct pci_dev *pdev = mvi->pdev; struct sas_ha_struct *sas_ha = &mvi->sas; - struct mvs_phy *phy = &mvi->phy[port_no]; + struct mvs_phy *phy = &mvi->phy[phy_no]; struct asd_sas_phy *sas_phy = &phy->sas_phy; - phy->irq_status = mvs_read_port_irq_stat(mvi, port_no); + phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no); /* * events is port event now , * we need check the interrupt status which belongs to per port. */ dev_printk(KERN_DEBUG, &pdev->dev, "Port %d Event = %X\n", - port_no, phy->irq_status); + phy_no, phy->irq_status); if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) { - if (!mvs_is_phy_ready(mvi, port_no)) { + mvs_release_task(mvi, phy_no); + if (!mvs_is_phy_ready(mvi, phy_no)) { sas_phy_disconnected(sas_phy); sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL); + dev_printk(KERN_INFO, &pdev->dev, + "Port %d Unplug Notice\n", phy_no); + } else mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL); } if (!(phy->irq_status & PHYEV_DEC_ERR)) { if (phy->irq_status & PHYEV_COMWAKE) { - u32 tmp = mvs_read_port_irq_mask(mvi, port_no); - mvs_write_port_irq_mask(mvi, port_no, + u32 tmp = mvs_read_port_irq_mask(mvi, phy_no); + mvs_write_port_irq_mask(mvi, phy_no, tmp | PHYEV_SIG_FIS); } if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) { - phy->phy_status = mvs_is_phy_ready(mvi, port_no); + phy->phy_status = mvs_is_phy_ready(mvi, phy_no); if (phy->phy_status) { - mvs_detect_porttype(mvi, port_no); + mvs_detect_porttype(mvi, phy_no); if (phy->phy_type & PORT_TYPE_SATA) { u32 tmp = mvs_read_port_irq_mask(mvi, - port_no); + phy_no); tmp &= ~PHYEV_SIG_FIS; mvs_write_port_irq_mask(mvi, - port_no, tmp); + phy_no, tmp); } - mvs_update_phyinfo(mvi, port_no, 0); + mvs_update_phyinfo(mvi, phy_no, 0); sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE); - mvs_bytes_dmaed(mvi, port_no); + mvs_bytes_dmaed(mvi, phy_no); } else { dev_printk(KERN_DEBUG, &pdev->dev, "plugin interrupt but phy is gone\n"); mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL); } - } else if (phy->irq_status & PHYEV_BROAD_CH) + } else if (phy->irq_status & PHYEV_BROAD_CH) { + mvs_release_task(mvi, phy_no); sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); + } } - mvs_write_port_irq_stat(mvi, port_no, phy->irq_status); + mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status); } static void mvs_int_sata(struct mvs_info *mvi) { - /* FIXME */ + u32 tmp; + void __iomem *regs = mvi->regs; + tmp = mr32(INT_STAT_SRS); + mw32(INT_STAT_SRS, tmp & 0xFFFF); +} + +static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task, + u32 slot_idx) +{ + void __iomem *regs = mvi->regs; + struct domain_device *dev = task->dev; + struct asd_sas_port *sas_port = dev->port; + struct mvs_port *port = mvi->slot_info[slot_idx].port; + u32 reg_set, phy_mask; + + if (!sas_protocol_ata(task->task_proto)) { + reg_set = 0; + phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap : + sas_port->phy_mask; + } else { + reg_set = port->taskfileset; + phy_mask = sas_port->phy_mask; + } + mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx | + (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) | + (phy_mask << TXQ_PHY_SHIFT) | + (reg_set << TXQ_SRS_SHIFT)); + + mw32(TX_PROD_IDX, mvi->tx_prod); + mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1); +} + +static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task, + u32 slot_idx, int err) +{ + struct mvs_port *port = mvi->slot_info[slot_idx].port; + struct task_status_struct *tstat = &task->task_status; + struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf; + int stat = SAM_GOOD; + + resp->frame_len = sizeof(struct dev_to_host_fis); + memcpy(&resp->ending_fis[0], + SATA_RECEIVED_D2H_FIS(port->taskfileset), + sizeof(struct dev_to_host_fis)); + tstat->buf_valid_size = sizeof(*resp); + if (unlikely(err)) + stat = SAS_PROTO_RESPONSE; + return stat; } -static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task, +static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc) +{ + u32 slot_idx = rx_desc & RXQ_SLOT_MASK; + mvs_tag_clear(mvi, slot_idx); +} + +static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task, struct mvs_slot_info *slot, u32 slot_idx) { if (!sas_protocol_ata(task->task_proto)) @@ -1149,38 +1297,58 @@ static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task, /* do nothing */ break; } - + list_del(&slot->list); + task->lldd_task = NULL; slot->task = NULL; - mvs_tag_clear(mvi, slot_idx); + slot->port = NULL; } -static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task, +static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task, u32 slot_idx) { struct mvs_slot_info *slot = &mvi->slot_info[slot_idx]; - u64 err_dw0 = *(u32 *) slot->response; - void __iomem *regs = mvi->regs; - u32 tmp; + u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response)); + u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4)); + int stat = SAM_CHECK_COND; - if (err_dw0 & CMD_ISS_STPD) - if (sas_protocol_ata(task->task_proto)) { - tmp = mr32(INT_STAT_SRS); - mw32(INT_STAT_SRS, tmp & 0xFFFF); - } + if (err_dw1 & SLOT_BSY_ERR) { + stat = SAS_QUEUE_FULL; + mvs_slot_reset(mvi, task, slot_idx); + } + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + break; + case SAS_PROTOCOL_SMP: + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + if (err_dw0 & TFILE_ERR) + stat = mvs_sata_done(mvi, task, slot_idx, 1); + break; + default: + break; + } - mvs_hba_sb_dump(mvi, slot_idx, task->task_proto); + mvs_hexdump(16, (u8 *) slot->response, 0); + return stat; } -static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc) +static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags) { u32 slot_idx = rx_desc & RXQ_SLOT_MASK; struct mvs_slot_info *slot = &mvi->slot_info[slot_idx]; struct sas_task *task = slot->task; - struct task_status_struct *tstat = &task->task_status; - struct mvs_port *port = &mvi->port[task->dev->port->id]; + struct task_status_struct *tstat; + struct mvs_port *port; bool aborted; void *to; + if (unlikely(!task || !task->lldd_task)) + return -1; + + mvs_hba_cq_dump(mvi); + spin_lock(&task->task_state_lock); aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED; if (!aborted) { @@ -1190,22 +1358,27 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc) } spin_unlock(&task->task_state_lock); - if (aborted) + if (aborted) { + mvs_slot_task_free(mvi, task, slot, slot_idx); + mvs_slot_free(mvi, rx_desc); return -1; + } + port = slot->port; + tstat = &task->task_status; memset(tstat, 0, sizeof(*tstat)); tstat->resp = SAS_TASK_COMPLETE; - - if (unlikely(!port->port_attached)) { - tstat->stat = SAS_PHY_DOWN; + if (unlikely(!port->port_attached || flags)) { + mvs_slot_err(mvi, task, slot_idx); + if (!sas_protocol_ata(task->task_proto)) + tstat->stat = SAS_PHY_DOWN; goto out; } /* error info record present */ - if ((rx_desc & RXQ_ERR) && (*(u64 *) slot->response)) { - tstat->stat = SAM_CHECK_COND; - mvs_slot_err(mvi, task, slot_idx); + if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) { + tstat->stat = mvs_slot_err(mvi, task, slot_idx); goto out; } @@ -1242,21 +1415,7 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc) case SAS_PROTOCOL_SATA: case SAS_PROTOCOL_STP: case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: { - struct ata_task_resp *resp = - (struct ata_task_resp *)tstat->buf; - - if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) == - RXQ_DONE) - tstat->stat = SAM_GOOD; - else - tstat->stat = SAM_CHECK_COND; - - resp->frame_len = sizeof(struct dev_to_host_fis); - memcpy(&resp->ending_fis[0], - SATA_RECEIVED_D2H_FIS(port->taskfileset), - sizeof(struct dev_to_host_fis)); - if (resp->ending_fis[2] & ATA_ERR) - mvs_hexdump(16, resp->ending_fis, 0); + tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0); break; } @@ -1266,11 +1425,34 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc) } out: - mvs_slot_free(mvi, task, slot, slot_idx); + mvs_slot_task_free(mvi, task, slot, slot_idx); + if (unlikely(tstat->stat != SAS_QUEUE_FULL)) + mvs_slot_free(mvi, rx_desc); + + spin_unlock(&mvi->lock); task->task_done(task); + spin_lock(&mvi->lock); return tstat->stat; } +static void mvs_release_task(struct mvs_info *mvi, int phy_no) +{ + struct list_head *pos, *n; + struct mvs_slot_info *slot; + struct mvs_phy *phy = &mvi->phy[phy_no]; + struct mvs_port *port = phy->port; + u32 rx_desc; + + if (!port) + return; + + list_for_each_safe(pos, n, &port->list) { + slot = container_of(pos, struct mvs_slot_info, list); + rx_desc = (u32) (slot - mvi->slot_info); + mvs_slot_complete(mvi, rx_desc, 1); + } +} + static void mvs_int_full(struct mvs_info *mvi) { void __iomem *regs = mvi->regs; @@ -1305,40 +1487,43 @@ static int mvs_int_rx(struct mvs_info *mvi, bool self_clear) * we don't have to stall the CPU reading that register. * The actual RX ring is offset by one dword, due to this. */ - rx_prod_idx = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK; - if (rx_prod_idx == 0xfff) { /* h/w hasn't touched RX ring yet */ - mvi->rx_cons = 0xfff; + rx_prod_idx = mvi->rx_cons; + mvi->rx_cons = le32_to_cpu(mvi->rx[0]); + if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */ return 0; - } /* The CMPL_Q may come late, read from register and try again * note: if coalescing is enabled, * it will need to read from register every time for sure */ if (mvi->rx_cons == rx_prod_idx) - return 0; + mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK; - if (mvi->rx_cons == 0xfff) - mvi->rx_cons = MVS_RX_RING_SZ - 1; + if (mvi->rx_cons == rx_prod_idx) + return 0; while (mvi->rx_cons != rx_prod_idx) { /* increment our internal RX consumer pointer */ - mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1); + rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1); - rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]); - - mvs_hba_cq_dump(mvi); + rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]); if (likely(rx_desc & RXQ_DONE)) - mvs_slot_complete(mvi, rx_desc); + mvs_slot_complete(mvi, rx_desc, 0); if (rx_desc & RXQ_ATTN) { attn = true; dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n", rx_desc); } else if (rx_desc & RXQ_ERR) { + if (!(rx_desc & RXQ_DONE)) + mvs_slot_complete(mvi, rx_desc, 0); dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n", rx_desc); + } else if (rx_desc & RXQ_SLOT_RESET) { + dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n", + rx_desc); + mvs_slot_free(mvi, rx_desc); } } @@ -1348,6 +1533,23 @@ static int mvs_int_rx(struct mvs_info *mvi, bool self_clear) return 0; } +#ifdef MVS_USE_TASKLET +static void mvs_tasklet(unsigned long data) +{ + struct mvs_info *mvi = (struct mvs_info *) data; + unsigned long flags; + + spin_lock_irqsave(&mvi->lock, flags); + +#ifdef MVS_DISABLE_MSI + mvs_int_full(mvi); +#else + mvs_int_rx(mvi, true); +#endif + spin_unlock_irqrestore(&mvi->lock, flags); +} +#endif + static irqreturn_t mvs_interrupt(int irq, void *opaque) { struct mvs_info *mvi = opaque; @@ -1356,18 +1558,21 @@ static irqreturn_t mvs_interrupt(int irq, void *opaque) stat = mr32(GBL_INT_STAT); - /* clear CMD_CMPLT ASAP */ - mw32_f(INT_STAT, CINT_DONE); - if (stat == 0 || stat == 0xffffffff) return IRQ_NONE; + /* clear CMD_CMPLT ASAP */ + mw32_f(INT_STAT, CINT_DONE); + +#ifndef MVS_USE_TASKLET spin_lock(&mvi->lock); mvs_int_full(mvi); spin_unlock(&mvi->lock); - +#else + tasklet_schedule(&mvi->tasklet); +#endif return IRQ_HANDLED; } @@ -1376,12 +1581,15 @@ static irqreturn_t mvs_msi_interrupt(int irq, void *opaque) { struct mvs_info *mvi = opaque; +#ifndef MVS_USE_TASKLET spin_lock(&mvi->lock); mvs_int_rx(mvi, true); spin_unlock(&mvi->lock); - +#else + tasklet_schedule(&mvi->tasklet); +#endif return IRQ_HANDLED; } #endif @@ -1576,15 +1784,19 @@ static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port) return MVS_ID_NOT_MAPPED; } -static u32 mvs_get_ncq_tag(struct sas_task *task) +static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag) { - u32 tag = 0; struct ata_queued_cmd *qc = task->uldd_task; - if (qc) - tag = qc->tag; + if (qc) { + if (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ) { + *tag = qc->tag; + return 1; + } + } - return tag; + return 0; } static int mvs_task_prep_ata(struct mvs_info *mvi, @@ -1628,11 +1840,9 @@ static int mvs_task_prep_ata(struct mvs_info *mvi, hdr->flags = cpu_to_le32(flags); /* FIXME: the low order order 5 bits for the TAG if enable NCQ */ - if (task->ata_task.use_ncq) { - hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task)); - /*Fill in task file */ - task->ata_task.fis.sector_count = hdr->tags << 3; - } else + if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags)) + task->ata_task.fis.sector_count |= hdr->tags << 3; + else hdr->tags = cpu_to_le32(tag); hdr->data_len = cpu_to_le32(task->total_xfer_len); @@ -1725,13 +1935,16 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi, u32 flags; u32 resp_len, req_len, i, tag = tei->tag; const u32 max_resp_len = SB_RFB_MAX; + u8 phy_mask; slot = &mvi->slot_info[tag]; + phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap : + task->dev->port->phy_mask; slot->tx = mvi->tx_prod; mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag | (TXQ_CMD_SSP << TXQ_CMD_SHIFT) | - (port->wide_port_phymap << TXQ_PHY_SHIFT)); + (phy_mask << TXQ_PHY_SHIFT)); flags = MCH_RETRY; if (task->ssp_task.enable_first_burst) { @@ -1832,22 +2045,32 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags) void __iomem *regs = mvi->regs; struct mvs_task_exec_info tei; struct sas_task *t = task; + struct mvs_slot_info *slot; u32 tag = 0xdeadbeef, rc, n_elem = 0; unsigned long flags; u32 n = num, pass = 0; spin_lock_irqsave(&mvi->lock, flags); - do { + dev = t->dev; tei.port = &mvi->port[dev->port->id]; if (!tei.port->port_attached) { - struct task_status_struct *ts = &t->task_status; - ts->stat = SAS_PHY_DOWN; - t->task_done(t); - rc = 0; - goto exec_exit; + if (sas_protocol_ata(t->task_proto)) { + rc = SAS_PHY_DOWN; + goto out_done; + } else { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + t->task_done(t); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } } + if (!sas_protocol_ata(t->task_proto)) { if (t->num_scatter) { n_elem = pci_map_sg(mvi->pdev, t->scatter, @@ -1866,9 +2089,10 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags) if (rc) goto err_out; - mvi->slot_info[tag].task = t; - mvi->slot_info[tag].n_elem = n_elem; - memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ); + slot = &mvi->slot_info[tag]; + t->lldd_task = NULL; + slot->n_elem = n_elem; + memset(slot->buf, 0, MVS_SLOT_BUF_SZ); tei.task = t; tei.hdr = &mvi->slot[tag]; tei.tag = tag; @@ -1897,28 +2121,26 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags) if (rc) goto err_out_tag; + slot->task = t; + slot->port = tei.port; + t->lldd_task = (void *) slot; + list_add_tail(&slot->list, &slot->port->list); /* TODO: select normal or high priority */ spin_lock(&t->task_state_lock); t->task_state_flags |= SAS_TASK_AT_INITIATOR; spin_unlock(&t->task_state_lock); - if (n == 1) { - spin_unlock_irqrestore(&mvi->lock, flags); - mw32(TX_PROD_IDX, mvi->tx_prod); - } mvs_hba_memory_dump(mvi, tag, t->task_proto); ++pass; mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1); - - if (n == 1) - break; - - t = list_entry(t->list.next, struct sas_task, list); + if (n > 1) + t = list_entry(t->list.next, struct sas_task, list); } while (--n); - return 0; + rc = 0; + goto out_done; err_out_tag: mvs_tag_free(mvi, tag); @@ -1928,7 +2150,7 @@ err_out: if (n_elem) pci_unmap_sg(mvi->pdev, t->scatter, n_elem, t->data_dir); -exec_exit: +out_done: if (pass) mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1)); spin_unlock_irqrestore(&mvi->lock, flags); @@ -1937,42 +2159,59 @@ exec_exit: static int mvs_task_abort(struct sas_task *task) { - int rc = 1; + int rc; unsigned long flags; struct mvs_info *mvi = task->dev->port->ha->lldd_ha; struct pci_dev *pdev = mvi->pdev; + int tag; spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_DONE) { rc = TMF_RESP_FUNC_COMPLETE; + spin_unlock_irqrestore(&task->task_state_lock, flags); goto out_done; } spin_unlock_irqrestore(&task->task_state_lock, flags); - /*FIXME*/ - rc = TMF_RESP_FUNC_COMPLETE; - switch (task->task_proto) { case SAS_PROTOCOL_SMP: - dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! "); + dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n"); break; case SAS_PROTOCOL_SSP: - dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! "); + dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n"); break; case SAS_PROTOCOL_SATA: case SAS_PROTOCOL_STP: case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{ - dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! " - "Dump D2H FIS: \n"); + dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n"); +#if _MV_DUMP + dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n"); mvs_hexdump(sizeof(struct host_to_dev_fis), (void *)&task->ata_task.fis, 0); dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n"); mvs_hexdump(16, task->ata_task.atapi_packet, 0); +#endif + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { + /* TODO */ + ; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); break; } default: break; } + + if (mvs_find_tag(mvi, task, &tag)) { + spin_lock_irqsave(&mvi->lock, flags); + mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag); + spin_unlock_irqrestore(&mvi->lock, flags); + } + if (!mvs_task_exec(task, 1, GFP_ATOMIC)) + rc = TMF_RESP_FUNC_COMPLETE; + else + rc = TMF_RESP_FUNC_FAILED; out_done: return rc; } @@ -2001,7 +2240,7 @@ static void mvs_free(struct mvs_info *mvi) mvi->rx_fis, mvi->rx_fis_dma); if (mvi->rx) dma_free_coherent(&mvi->pdev->dev, - sizeof(*mvi->rx) * MVS_RX_RING_SZ, + sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1), mvi->rx, mvi->rx_dma); if (mvi->slot) dma_free_coherent(&mvi->pdev->dev, @@ -2109,6 +2348,9 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev, return NULL; spin_lock_init(&mvi->lock); +#ifdef MVS_USE_TASKLET + tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi); +#endif mvi->pdev = pdev; mvi->chip = chip; @@ -2132,6 +2374,10 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev, mvs_phy_init(mvi, i); arr_phy[i] = &mvi->phy[i].sas_phy; arr_port[i] = &mvi->port[i].sas_port; + mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED; + mvi->port[i].wide_port_phymap = 0; + mvi->port[i].port_attached = 0; + INIT_LIST_HEAD(&mvi->port[i].list); } SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas; @@ -2148,9 +2394,10 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev, mvi->sas.sas_phy = arr_phy; mvi->sas.sas_port = arr_port; mvi->sas.num_phys = chip->n_phy; - mvi->sas.lldd_max_execute_num = MVS_CHIP_SLOT_SZ - 1; + mvi->sas.lldd_max_execute_num = 1; mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE; - mvi->can_queue = (MVS_CHIP_SLOT_SZ >> 1) - 1; + mvi->shost->can_queue = MVS_CAN_QUEUE; + mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys; mvi->sas.lldd_ha = mvi; mvi->sas.core.shost = mvi->shost; @@ -2203,11 +2450,11 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev, memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ); mvi->rx = dma_alloc_coherent(&pdev->dev, - sizeof(*mvi->rx) * MVS_RX_RING_SZ, + sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1), &mvi->rx_dma, GFP_KERNEL); if (!mvi->rx) goto err_out; - memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ); + memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1)); mvi->rx[0] = cpu_to_le32(0xfff); mvi->rx_cons = 0xfff; @@ -2357,7 +2604,7 @@ static void __devinit mvs_phy_hacks(struct mvs_info *mvi) mvs_cw32(regs, CMD_SAS_CTL0, tmp); /* workaround for WDTIMEOUT , set to 550 ms */ - mvs_cw32(regs, CMD_WD_TIMER, 0xffffff); + mvs_cw32(regs, CMD_WD_TIMER, 0x86470); /* not to halt for different port op during wideport link change */ mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d); @@ -2465,17 +2712,16 @@ static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i) { u32 tmp; struct mvs_phy *phy = &mvi->phy[i]; - struct mvs_port *port; + struct mvs_port *port = phy->port;; tmp = mvs_read_phy_ctl(mvi, i); if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) { - if (!phy->port) + if (!port) phy->phy_attached = 1; return tmp; } - port = phy->port; if (port) { if (phy->phy_type & PORT_TYPE_SAS) { port->wide_port_phymap &= ~(1U << i); @@ -2497,7 +2743,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i, { struct mvs_phy *phy = &mvi->phy[i]; struct pci_dev *pdev = mvi->pdev; - u32 tmp, j; + u32 tmp; u64 tmp64; mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY); @@ -2524,46 +2770,20 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i, sas_phy->linkrate = (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >> PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET; - - /* Updated attached_sas_addr */ - mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI); - phy->att_dev_sas_addr = - (u64) mvs_read_port_cfg_data(mvi, i) << 32; - - mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO); - phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i); - - dev_printk(KERN_DEBUG, &pdev->dev, - "phy[%d] Get Attached Address 0x%llX ," - " SAS Address 0x%llX\n", - i, phy->att_dev_sas_addr, phy->dev_sas_addr); - dev_printk(KERN_DEBUG, &pdev->dev, - "Rate = %x , type = %d\n", - sas_phy->linkrate, phy->phy_type); - -#if 1 - /* - * If the device is capable of supporting a wide port - * on its phys, it may configure the phys as a wide port. - */ - if (phy->phy_type & PORT_TYPE_SAS) - for (j = 0; j < mvi->chip->n_phy && j != i; ++j) { - if ((mvi->phy[j].phy_attached) && - (mvi->phy[j].phy_type & PORT_TYPE_SAS)) - if (phy->att_dev_sas_addr == - mvi->phy[j].att_dev_sas_addr - 1) { - phy->att_dev_sas_addr = - mvi->phy[j].att_dev_sas_addr; - break; - } - } - -#endif - - tmp64 = cpu_to_be64(phy->att_dev_sas_addr); - memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE); + phy->minimum_linkrate = + (phy->phy_status & + PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8; + phy->maximum_linkrate = + (phy->phy_status & + PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12; if (phy->phy_type & PORT_TYPE_SAS) { + /* Updated attached_sas_addr */ + mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI); + phy->att_dev_sas_addr = + (u64) mvs_read_port_cfg_data(mvi, i) << 32; + mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO); + phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i); mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO); phy->att_dev_info = mvs_read_port_cfg_data(mvi, i); phy->identify.device_type = @@ -2582,6 +2802,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i, } else if (phy->phy_type & PORT_TYPE_SATA) { phy->identify.target_port_protocols = SAS_PROTOCOL_STP; if (mvs_is_sig_fis_received(phy->irq_status)) { + phy->att_dev_sas_addr = i; /* temp */ if (phy_st & PHY_OOB_DTCTD) sas_phy->oob_mode = SATA_OOB_MODE; phy->frame_rcvd_size = @@ -2591,20 +2812,34 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i, } else { dev_printk(KERN_DEBUG, &pdev->dev, "No sig fis\n"); + phy->phy_type &= ~(PORT_TYPE_SATA); + goto out_done; } } + tmp64 = cpu_to_be64(phy->att_dev_sas_addr); + memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE); + + dev_printk(KERN_DEBUG, &pdev->dev, + "phy[%d] Get Attached Address 0x%llX ," + " SAS Address 0x%llX\n", + i, phy->att_dev_sas_addr, phy->dev_sas_addr); + dev_printk(KERN_DEBUG, &pdev->dev, + "Rate = %x , type = %d\n", + sas_phy->linkrate, phy->phy_type); + /* workaround for HW phy decoding error on 1.5g disk drive */ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6); tmp = mvs_read_port_vsr_data(mvi, i); if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >> PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) == SAS_LINK_RATE_1_5_GBPS) - tmp &= ~PHY_MODE6_DTL_SPEED; + tmp &= ~PHY_MODE6_LATECLK; else - tmp |= PHY_MODE6_DTL_SPEED; + tmp |= PHY_MODE6_LATECLK; mvs_write_port_vsr_data(mvi, i, tmp); } +out_done: if (get_st) mvs_write_port_irq_stat(mvi, i, phy->irq_status); } @@ -2629,6 +2864,11 @@ static void mvs_port_formed(struct asd_sas_phy *sas_phy) spin_unlock_irqrestore(&mvi->lock, flags); } +static int mvs_I_T_nexus_reset(struct domain_device *dev) +{ + return TMF_RESP_FUNC_FAILED; +} + static int __devinit mvs_hw_init(struct mvs_info *mvi) { void __iomem *regs = mvi->regs; @@ -2790,13 +3030,12 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi) /* enable CMD/CMPL_Q/RESP mode */ mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN); - /* re-enable interrupts globally */ - mvs_hba_interrupt_enable(mvi); - /* enable completion queue interrupt */ - tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM); + tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS); mw32(INT_MASK, tmp); + /* Enable SRS interrupt */ + mw32(INT_MASK_SRS, 0xFF); return 0; } @@ -2870,6 +3109,8 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev, mvs_print_info(mvi); + mvs_hba_interrupt_enable(mvi); + scsi_scan_host(mvi->shost); return 0; @@ -2915,12 +3156,22 @@ static struct sas_domain_function_template mvs_transport_ops = { .lldd_execute_task = mvs_task_exec, .lldd_control_phy = mvs_phy_control, .lldd_abort_task = mvs_task_abort, - .lldd_port_formed = mvs_port_formed + .lldd_port_formed = mvs_port_formed, + .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset, }; static struct pci_device_id __devinitdata mvs_pci_table[] = { { PCI_VDEVICE(MARVELL, 0x6320), chip_6320 }, { PCI_VDEVICE(MARVELL, 0x6340), chip_6440 }, + { + .vendor = PCI_VENDOR_ID_MARVELL, + .device = 0x6440, + .subvendor = PCI_ANY_ID, + .subdevice = 0x6480, + .class = 0, + .class_mask = 0, + .driver_data = chip_6480, + }, { PCI_VDEVICE(MARVELL, 0x6440), chip_6440 }, { PCI_VDEVICE(MARVELL, 0x6480), chip_6480 }, diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index b9b09a70458..ed83cdb6e67 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -294,7 +294,6 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) } if (sdev->request_queue) { - bsg_unregister_queue(sdev->request_queue); sdev->request_queue->queuedata = NULL; /* user context needed to free queue */ scsi_free_queue(sdev->request_queue); @@ -858,6 +857,7 @@ void __scsi_remove_device(struct scsi_device *sdev) if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) return; + bsg_unregister_queue(sdev->request_queue); class_device_unregister(&sdev->sdev_classdev); transport_remove_device(dev); device_del(dev); diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 1efcad3b6fc..ca90c519259 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -111,15 +111,6 @@ superio_inw(int reg) return val; } -static void -superio_outw(int val, int reg) -{ - outb(reg++, REG); - outb((val >> 8) & 0xff, VAL); - outb(reg, REG); - outb(val & 0xff, VAL); -} - static inline void superio_select(int ldn) { @@ -170,9 +161,8 @@ it8712f_wdt_update_margin(void) superio_outb(config, WDT_CONFIG); if (revision >= 0x08) - superio_outw(units, WDT_TIMEOUT); - else - superio_outb(units, WDT_TIMEOUT); + superio_outb(units >> 8, WDT_TIMEOUT + 1); + superio_outb(units, WDT_TIMEOUT); } static int diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 788865df1bc..584bb0f9c36 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -138,6 +138,7 @@ struct afs_cell *afs_cell_create(const char *name, char *vllist) cell = afs_cell_alloc(name, vllist); if (IS_ERR(cell)) { _leave(" = %ld", PTR_ERR(cell)); + up_write(&afs_cells_sem); return cell; } diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index cb18af98964..5bb57bf2b9d 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1786,6 +1786,7 @@ struct cpu_spec { char *cpu_name; unsigned char cpu_od; /* Set Config[OD] */ unsigned char cpu_bclk; /* Enable BCLK switching */ + unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ }; extern struct cpu_spec cpu_specs[]; diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h deleted file mode 100644 index 59fbfdc90df..00000000000 --- a/include/asm-sh/floppy.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Architecture specific parts of the Floppy driver - * include/asm-i386/floppy.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - */ -#ifndef __ASM_SH_FLOPPY_H -#define __ASM_SH_FLOPPY_H - -#include <linux/vmalloc.h> - - -/* - * The DMA channel used by the floppy controller cannot access data at - * addresses >= 16MB - * - * Went back to the 1MB limit, as some people had problems with the floppy - * driver otherwise. It doesn't matter much for performance anyway, as most - * floppy accesses go through the track buffer. - */ -#define _CROSS_64KB(a,s,vdma) \ -(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) - -#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1) - - -#define SW fd_routine[use_virtual_dma&1] -#define CSW fd_routine[can_use_virtual_dma & 1] - - -#define fd_inb(port) inb_p(port) -#define fd_outb(value,port) outb_p(value,port) - -#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy") -#define fd_free_dma() CSW._free_dma(FLOPPY_DMA) -#define fd_enable_irq() enable_irq(FLOPPY_IRQ) -#define fd_disable_irq() disable_irq(FLOPPY_IRQ) -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) -#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA) -#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size) -#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io) - -#define FLOPPY_CAN_FALLBACK_ON_NODMA - -static int virtual_dma_count; -static int virtual_dma_residue; -static char *virtual_dma_addr; -static int virtual_dma_mode; -static int doing_pdma; - -static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs) -{ - register unsigned char st; - -#undef TRACE_FLPY_INT - -#ifdef TRACE_FLPY_INT - static int calls=0; - static int bytes=0; - static int dma_wait=0; -#endif - if(!doing_pdma) { - floppy_interrupt(irq, dev_id, regs); - return; - } - -#ifdef TRACE_FLPY_INT - if(!calls) - bytes = virtual_dma_count; -#endif - - { - register int lcount; - register char *lptr; - - st = 1; - for(lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if(st != 0xa0) - break; - if(virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - } - -#ifdef TRACE_FLPY_INT - calls++; -#endif - if(st == 0x20) - return; - if(!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -#ifdef TRACE_FLPY_INT - printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", - virtual_dma_count, virtual_dma_residue, calls, bytes, - dma_wait); - calls = 0; - dma_wait=0; -#endif - doing_pdma = 0; - floppy_interrupt(irq, dev_id, regs); - return; - } -#ifdef TRACE_FLPY_INT - if(!virtual_dma_count) - dma_wait++; -#endif -} - -static void fd_disable_dma(void) -{ - if(! (can_use_virtual_dma & 1)) - disable_dma(FLOPPY_DMA); - doing_pdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - -static int vdma_request_dma(unsigned int dmanr, const char * device_id) -{ - return 0; -} - -static void vdma_nop(unsigned int dummy) -{ -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static int fd_request_irq(void) -{ - if(can_use_virtual_dma) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); - else - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static unsigned long dma_mem_alloc(unsigned long size) -{ - return __get_dma_pages(GFP_KERNEL,get_order(size)); -} - - -static unsigned long vdma_mem_alloc(unsigned long size) -{ - return (unsigned long) vmalloc(size); - -} - -#define nodma_mem_alloc(size) vdma_mem_alloc(size) - -static void _fd_dma_mem_free(unsigned long addr, unsigned long size) -{ - if((unsigned int) addr >= (unsigned int) high_memory) - return vfree((void *)addr); - else - free_pages(addr, get_order(size)); -} - -#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size) - -static void _fd_chose_dma_mode(char *addr, unsigned long size) -{ - if(can_use_virtual_dma == 2) { - if((unsigned int) addr >= (unsigned int) high_memory || - virt_to_phys(addr) >= 0x10000000) - use_virtual_dma = 1; - else - use_virtual_dma = 0; - } else { - use_virtual_dma = can_use_virtual_dma & 1; - } -} - -#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size) - - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_pdma = 1; - virtual_dma_port = io; - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - -static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) -{ -#ifdef FLOPPY_SANITY_CHECK - if (CROSS_64KB(addr, size)) { - printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); - return -1; - } -#endif - - __flush_purge_region(addr, size); - - /* actual, physical DMA */ - doing_pdma = 0; - clear_dma_ff(FLOPPY_DMA); - set_dma_mode(FLOPPY_DMA,mode); - set_dma_addr(FLOPPY_DMA,virt_to_phys(addr)); - set_dma_count(FLOPPY_DMA,size); - enable_dma(FLOPPY_DMA); - return 0; -} - -static struct fd_routine_l { - int (*_request_dma)(unsigned int dmanr, const char * device_id); - void (*_free_dma)(unsigned int dmanr); - int (*_get_dma_residue)(unsigned int dummy); - unsigned long (*_dma_mem_alloc) (unsigned long size); - int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); -} fd_routine[] = { - { - request_dma, - free_dma, - get_dma_residue, - dma_mem_alloc, - hard_dma_setup - }, - { - vdma_request_dma, - vdma_nop, - vdma_get_dma_residue, - vdma_mem_alloc, - vdma_dma_setup - } -}; - - -static int FDC1 = 0x3f0; -static int FDC2 = -1; - -/* - * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock - * is needed to prevent corrupted CMOS RAM in case "insmod floppy" - * coincides with another rtc CMOS user. Paul G. - */ -#define FLOPPY0_TYPE (4) -#define FLOPPY1_TYPE (0) - -#define N_FDC 2 -#define N_DRIVE 8 - -#define EXTRA_FLOPPY_PARAMS - -#endif /* __ASM_SH_FLOPPY_H */ diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h index f8429880a27..91462fea150 100644 --- a/include/asm-sh/fpu.h +++ b/include/asm-sh/fpu.h @@ -1,9 +1,8 @@ #ifndef __ASM_SH_FPU_H #define __ASM_SH_FPU_H -#define SR_FD 0x00008000 - #ifndef __ASSEMBLY__ +#include <linux/preempt.h> #include <asm/ptrace.h> #ifdef CONFIG_SH_FPU @@ -21,25 +20,35 @@ struct task_struct; extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); #else + #define release_fpu(regs) do { } while (0) #define grab_fpu(regs) do { } while (0) -#define save_fpu(tsk, regs) do { } while (0) + +static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); +} #endif extern int do_fpu_inst(unsigned short, struct pt_regs *); -#define unlazy_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - save_fpu(tsk, regs); \ - } \ -} while (0) - -#define clear_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); \ - release_fpu(regs); \ - } \ -} while (0) +static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) + save_fpu(tsk, regs); + preempt_enable(); +} + +static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + release_fpu(regs); + } + preempt_enable(); +} #endif /* __ASSEMBLY__ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 19fe47c1ca1..ec707b98e5b 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,7 +2,6 @@ #define __ASM_SH_PROCESSOR_H #include <asm/cpu-features.h> -#include <asm/fpu.h> #ifndef __ASSEMBLY__ /* diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index df2d5b039ef..c09305d6a9d 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -70,6 +70,7 @@ extern struct sh_cpuinfo cpu_data[]; */ #define SR_DSP 0x00001000 #define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 /* * FPU structure and data diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index eda4bef448e..88a2edf8fa5 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -112,6 +112,7 @@ extern struct sh_cpuinfo cpu_data[]; #endif #define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 #define SR_SSTEP 0x08000000 #ifndef __ASSEMBLY__ diff --git a/include/linux/input.h b/include/linux/input.h index 1bdc39a8c76..cae2c35d120 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1227,12 +1227,13 @@ void input_free_device(struct input_dev *dev); static inline struct input_dev *input_get_device(struct input_dev *dev) { - return to_input_dev(get_device(&dev->dev)); + return dev ? to_input_dev(get_device(&dev->dev)) : NULL; } static inline void input_put_device(struct input_dev *dev) { - put_device(&dev->dev); + if (dev) + put_device(&dev->dev); } static inline void *input_get_drvdata(struct input_dev *dev) diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 1b4ccf25b4d..cac4b364cd4 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -2,6 +2,7 @@ #define IOCONTEXT_H #include <linux/radix-tree.h> +#include <linux/rcupdate.h> /* * This is the per-process anticipatory I/O scheduler state. @@ -54,6 +55,8 @@ struct cfq_io_context { void (*dtor)(struct io_context *); /* destructor */ void (*exit)(struct io_context *); /* called on task exit */ + + struct rcu_head rcu_head; }; /* diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a2f003239c8..ee81906b516 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -383,9 +383,11 @@ static inline void __napi_complete(struct napi_struct *n) static inline void napi_complete(struct napi_struct *n) { - local_irq_disable(); + unsigned long flags; + + local_irq_save(flags); __napi_complete(n); - local_irq_enable(); + local_irq_restore(flags); } /** @@ -1072,12 +1074,14 @@ static inline int netif_is_multiqueue(const struct net_device *dev) } /* Use this variant when it is known for sure that it - * is executing from interrupt context. + * is executing from hardware interrupt context or with hardware interrupts + * disabled. */ extern void dev_kfree_skb_irq(struct sk_buff *skb); /* Use this variant in places where it could be invoked - * either from interrupt or non-interrupt context. + * from either hardware interrupt or other context, with hardware interrupts + * either disabled or enabled. */ extern void dev_kfree_skb_any(struct sk_buff *skb); diff --git a/include/net/llc.h b/include/net/llc.h index f5024583fc8..7940da1606e 100644 --- a/include/net/llc.h +++ b/include/net/llc.h @@ -65,7 +65,6 @@ struct llc_sap { extern struct list_head llc_sap_list; extern rwlock_t llc_sap_list_lock; -extern unsigned char llc_station_mac_sa[ETH_ALEN]; extern int llc_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev); diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h index 4a8f58b17e4..75b8e2968c9 100644 --- a/include/net/llc_pdu.h +++ b/include/net/llc_pdu.h @@ -381,7 +381,7 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb, xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */ xid_info->type = svcs_supported; xid_info->rw = rx_window << 1; /* size of receive window */ - skb_put(skb, 3); + skb_put(skb, sizeof(struct llc_xid_info)); } /** @@ -406,7 +406,7 @@ static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb, xid_info->fmt_id = LLC_XID_FMT_ID; xid_info->type = svcs_supported; xid_info->rw = rx_window << 1; - skb_put(skb, 3); + skb_put(skb, sizeof(struct llc_xid_info)); } /* LLC Type 2 FRMR response information field format */ diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h index 2c56dbece72..ed25bec2f64 100644 --- a/include/net/llc_sap.h +++ b/include/net/llc_sap.h @@ -1,5 +1,8 @@ #ifndef LLC_SAP_H #define LLC_SAP_H + +#include <asm/types.h> + /* * Copyright (c) 1997 by Procom Technology,Inc. * 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br> @@ -19,8 +22,8 @@ struct sock; extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb); extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb, unsigned char prim); -extern struct sk_buff *llc_alloc_frame(struct sock *sk, - struct net_device *dev); +extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev, + u8 type, u32 data_size); extern void llc_build_and_send_test_pkt(struct llc_sap *sap, struct sk_buff *skb, diff --git a/mm/slub.c b/mm/slub.c index 84ed734b96b..acc975fcc8c 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2688,7 +2688,7 @@ void kfree(const void *x) } EXPORT_SYMBOL(kfree); -#if defined(SLUB_DEBUG) || defined(CONFIG_SLABINFO) +#if defined(CONFIG_SLUB_DEBUG) || defined(CONFIG_SLABINFO) static unsigned long count_partial(struct kmem_cache_node *n) { unsigned long flags; diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index dbc81b96509..b33410abfd6 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -374,17 +374,35 @@ static void vlan_sync_address(struct net_device *dev, memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN); } +static void __vlan_device_event(struct net_device *dev, unsigned long event) +{ + switch (event) { + case NETDEV_CHANGENAME: + vlan_proc_rem_dev(dev); + if (vlan_proc_add_dev(dev) < 0) + pr_warning("8021q: failed to change proc name for %s\n", + dev->name); + break; + } +} + static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) { struct net_device *dev = ptr; - struct vlan_group *grp = __vlan_find_group(dev->ifindex); + struct vlan_group *grp; int i, flgs; struct net_device *vlandev; if (dev->nd_net != &init_net) return NOTIFY_DONE; + if (is_vlan_dev(dev)) { + __vlan_device_event(dev, event); + goto out; + } + + grp = __vlan_find_group(dev->ifindex); if (!grp) goto out; diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h index 73efcc715cc..51271aea402 100644 --- a/net/8021q/vlan.h +++ b/net/8021q/vlan.h @@ -45,4 +45,9 @@ void vlan_netlink_fini(void); extern struct rtnl_link_ops vlan_link_ops; +static inline int is_vlan_dev(struct net_device *dev) +{ + return dev->priv_flags & IFF_802_1Q_VLAN; +} + #endif /* !(__BEN_VLAN_802_1Q_INC__) */ diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index 146cfb0e988..9671aa51af2 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -210,11 +210,6 @@ int vlan_proc_rem_dev(struct net_device *vlandev) * The following few functions build the content of /proc/net/vlan/config */ -static inline int is_vlan_dev(struct net_device *dev) -{ - return dev->priv_flags & IFF_802_1Q_VLAN; -} - /* start read of /proc/net/vlan/config */ static void *vlan_seq_start(struct seq_file *seq, loff_t *pos) __acquires(dev_base_lock) diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 1220d8a41eb..d366423c839 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -53,6 +53,30 @@ /* Bluetooth sockets */ #define BT_MAX_PROTO 8 static struct net_proto_family *bt_proto[BT_MAX_PROTO]; + +static struct lock_class_key bt_slock_key[BT_MAX_PROTO]; +static struct lock_class_key bt_lock_key[BT_MAX_PROTO]; +static const char *bt_key_strings[BT_MAX_PROTO] = { + "sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP", + "sk_lock-AF_BLUETOOTH-BTPROTO_HCI", + "sk_lock-AF_BLUETOOTH-BTPROTO_SCO", + "sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM", + "sk_lock-AF_BLUETOOTH-BTPROTO_BNEP", + "sk_lock-AF_BLUETOOTH-BTPROTO_CMTP", + "sk_lock-AF_BLUETOOTH-BTPROTO_HIDP", + "sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP", +}; + +static const char *bt_slock_key_strings[BT_MAX_PROTO] = { + "slock-AF_BLUETOOTH-BTPROTO_L2CAP", + "slock-AF_BLUETOOTH-BTPROTO_HCI", + "slock-AF_BLUETOOTH-BTPROTO_SCO", + "slock-AF_BLUETOOTH-BTPROTO_RFCOMM", + "slock-AF_BLUETOOTH-BTPROTO_BNEP", + "slock-AF_BLUETOOTH-BTPROTO_CMTP", + "slock-AF_BLUETOOTH-BTPROTO_HIDP", + "slock-AF_BLUETOOTH-BTPROTO_AVDTP", +}; static DEFINE_RWLOCK(bt_proto_lock); int bt_sock_register(int proto, struct net_proto_family *ops) @@ -95,6 +119,21 @@ int bt_sock_unregister(int proto) } EXPORT_SYMBOL(bt_sock_unregister); +static void bt_reclassify_sock_lock(struct socket *sock, int proto) +{ + struct sock *sk = sock->sk; + + if (!sk) + return; + BUG_ON(sock_owned_by_user(sk)); + + sock_lock_init_class_and_name(sk, + bt_slock_key_strings[proto], + &bt_slock_key[proto], + bt_key_strings[proto], + &bt_lock_key[proto]); +} + static int bt_sock_create(struct net *net, struct socket *sock, int proto) { int err; @@ -117,6 +156,7 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto) if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) { err = bt_proto[proto]->create(net, sock, proto); + bt_reclassify_sock_lock(sock, proto); module_put(bt_proto[proto]->owner); } diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index b5d4019d357..1d36c093523 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -84,7 +84,7 @@ static struct hci_sec_filter hci_sec_filter = { }; static struct bt_sock_list hci_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock) }; /* Send frame to RAW socket */ diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 34f8bf98bc0..2957df4b6c0 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -62,7 +62,7 @@ static u32 l2cap_feat_mask = 0x0000; static const struct proto_ops l2cap_sock_ops; static struct bt_sock_list l2cap_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock) }; static void __l2cap_sock_close(struct sock *sk, int reason); diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 0c2c93735e9..eb62558e9b0 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err) rfcomm_dlc_lock(d); d->state = BT_CLOSED; - d->state_change(d, err); rfcomm_dlc_unlock(d); + d->state_change(d, err); skb_queue_purge(&d->tx_queue); rfcomm_dlc_unlink(d); diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index c46d51035e7..af4e3934ee8 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -60,7 +60,7 @@ static const struct proto_ops rfcomm_sock_ops; static struct bt_sock_list rfcomm_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock) }; static void rfcomm_sock_close(struct sock *sk); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index e4c779bb8d7..c3f749abb2d 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -570,12 +570,7 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) return; rfcomm_dev_del(dev); - /* We have to drop DLC lock here, otherwise - rfcomm_dev_put() will dead lock if it's - the last reference. */ - rfcomm_dlc_unlock(dlc); rfcomm_dev_put(dev); - rfcomm_dlc_lock(dlc); } } else tty_hangup(dev->tty); diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index b91d3c81a73..cd887cdca42 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -58,7 +58,7 @@ static const struct proto_ops sco_sock_ops; static struct bt_sock_list sco_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock) }; static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent); diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index f3ceca31aa4..4e73e5708e7 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -336,7 +336,7 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb) struct scatterlist *asg; int err = -EINVAL; - if (!pskb_may_pull(skb, sizeof(*esph))) + if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) goto out; if (elen <= 0) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 724d69aed03..a0a3c78cb5e 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -86,7 +86,10 @@ EXPORT_SYMBOL(inet_frags_fini); void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f) { nf->low_thresh = 0; + + local_bh_disable(); inet_frag_evictor(nf, f); + local_bh_enable(); } EXPORT_SYMBOL(inet_frags_exit_net); diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 0b3b328d82d..a4506c8cfef 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -85,7 +85,7 @@ int ip_forward(struct sk_buff *skb) if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway) goto sr_failed; - if (unlikely(skb->len > dst_mtu(&rt->u.dst) && + if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) && (ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) { IP_INC_STATS(IPSTATS_MIB_FRAGFAILS); icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index fe05da41d6b..4dc162894cb 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -588,11 +588,9 @@ static int __init ip_queue_init(void) } #ifdef CONFIG_PROC_FS - proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net); - if (proc) { - proc->owner = THIS_MODULE; - proc->proc_fops = &ip_queue_proc_fops; - } else { + proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net, + &ip_queue_proc_fops); + if (!proc) { printk(KERN_ERR "ip_queue: failed to create proc entry\n"); goto cleanup_ipqnl; } diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index c6cf84c7761..52926c8e3cc 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -167,14 +167,13 @@ clusterip_config_init(struct ipt_clusterip_tgt_info *i, __be32 ip, /* create proc dir entry */ sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(ip)); - c->pde = create_proc_entry(buffer, S_IWUSR|S_IRUSR, - clusterip_procdir); + c->pde = proc_create(buffer, S_IWUSR|S_IRUSR, + clusterip_procdir, &clusterip_proc_fops); if (!c->pde) { kfree(c); return NULL; } } - c->pde->proc_fops = &clusterip_proc_fops; c->pde->data = c; #endif diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c index 8e8f0425a8e..50e06690eb5 100644 --- a/net/ipv4/netfilter/ipt_recent.c +++ b/net/ipv4/netfilter/ipt_recent.c @@ -276,12 +276,11 @@ recent_mt_check(const char *tablename, const void *ip, for (i = 0; i < ip_list_hash_size; i++) INIT_LIST_HEAD(&t->iphash[i]); #ifdef CONFIG_PROC_FS - t->proc = create_proc_entry(t->name, ip_list_perms, proc_dir); + t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops); if (t->proc == NULL) { kfree(t); goto out; } - t->proc->proc_fops = &recent_fops; t->proc->uid = ip_list_uid; t->proc->gid = ip_list_gid; t->proc->data = t; diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c index 089252e82c0..f500b0fdaef 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c @@ -395,13 +395,10 @@ int __init nf_conntrack_ipv4_compat_init(void) if (!proc_exp) goto err2; - proc_stat = create_proc_entry("ip_conntrack", S_IRUGO, init_net.proc_net_stat); + proc_stat = proc_create("ip_conntrack", S_IRUGO, + init_net.proc_net_stat, &ct_cpu_seq_fops); if (!proc_stat) goto err3; - - proc_stat->proc_fops = &ct_cpu_seq_fops; - proc_stat->owner = THIS_MODULE; - return 0; err3: diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 7ea1b67b6de..1704c1474ea 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1556,14 +1556,14 @@ static void *udp_seq_start(struct seq_file *seq, loff_t *pos) __acquires(udp_hash_lock) { read_lock(&udp_hash_lock); - return *pos ? udp_get_idx(seq, *pos-1) : (void *)1; + return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN; } static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct sock *sk; - if (v == (void *)1) + if (v == SEQ_START_TOKEN) sk = udp_get_idx(seq, 0); else sk = udp_get_next(seq, v); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 101e0e70ba2..e7a1882db04 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -776,6 +776,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i struct inet6_dev *idev = ifp->idev; struct in6_addr addr, *tmpaddr; unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp; + unsigned long regen_advance; int tmp_plen; int ret = 0; int max_addresses; @@ -836,8 +837,23 @@ retry: tmp_tstamp = ifp->tstamp; spin_unlock_bh(&ifp->lock); + regen_advance = idev->cnf.regen_max_retry * + idev->cnf.dad_transmits * + idev->nd_parms->retrans_time / HZ; write_unlock(&idev->lock); + /* A temporary address is created only if this calculated Preferred + * Lifetime is greater than REGEN_ADVANCE time units. In particular, + * an implementation must not create a temporary address with a zero + * Preferred Lifetime. + */ + if (tmp_prefered_lft <= regen_advance) { + in6_ifa_put(ifp); + in6_dev_put(idev); + ret = -1; + goto out; + } + addr_flags = IFA_F_TEMPORARY; /* set in addrconf_prefix_rcv() */ if (ifp->flags & IFA_F_OPTIMISTIC) @@ -1831,6 +1847,9 @@ ok: * lifetimes of an existing temporary address * when processing a Prefix Information Option. */ + if (ifp != ift->ifpub) + continue; + spin_lock(&ift->lock); flags = ift->flags; if (ift->valid_lft > valid_lft && diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 0ec1402320e..c6bb4c6d24b 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -282,7 +282,7 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb) struct scatterlist *sg; struct scatterlist *asg; - if (!pskb_may_pull(skb, sizeof(*esph))) { + if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) { ret = -EINVAL; goto out; } diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 121d517bf91..f204a7275a0 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -436,10 +436,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, } if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6)) - goto out; + goto out_dst_release; if (ip6_dst_lookup(sk, &dst2, &fl)) - goto out; + goto out_dst_release; err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP); if (err == -ENOENT) { diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 178aebc0427..98ab4f45990 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -239,8 +239,7 @@ int ip6_mc_input(struct sk_buff *skb) IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS); hdr = ipv6_hdr(skb); - deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) || - ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL); + deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL); /* * IPv6 multicast router mode isnt currently supported. diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index cc2f9afcf80..8d366f7f2a9 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -591,11 +591,9 @@ static int __init ip6_queue_init(void) } #ifdef CONFIG_PROC_FS - proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net); - if (proc) { - proc->owner = THIS_MODULE; - proc->proc_fops = &ip6_queue_proc_fops; - } else { + proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net, + &ip6_queue_proc_fops); + if (!proc) { printk(KERN_ERR "ip6_queue: failed to create proc entry\n"); goto cleanup_ipqnl; } diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 2a0d698b24d..24c0d03095b 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -171,7 +171,9 @@ static __inline__ void fq_kill(struct nf_ct_frag6_queue *fq) static void nf_ct_frag6_evictor(void) { + local_bh_disable(); inet_frag_evictor(&nf_init_frags, &nf_frags); + local_bh_enable(); } static void nf_ct_frag6_expire(unsigned long data) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 46cf962f7f8..8c50eb430c1 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -155,6 +155,9 @@ static int llc_ui_create(struct net *net, struct socket *sock, int protocol) struct sock *sk; int rc = -ESOCKTNOSUPPORT; + if (!capable(CAP_NET_RAW)) + return -EPERM; + if (net != &init_net) return -EAFNOSUPPORT; diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index 860140caa6e..71a00225bdb 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -198,7 +198,7 @@ int llc_conn_ac_send_disc_cmd_p_set_x(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -223,7 +223,7 @@ int llc_conn_ac_send_dm_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -249,7 +249,7 @@ int llc_conn_ac_send_dm_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -282,7 +282,8 @@ int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock *sk, struct sk_buff *skb) llc_pdu_decode_pf_bit(skb, &f_bit); else f_bit = 0; - nskb = llc_alloc_frame(sk, llc->dev); + nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; @@ -306,7 +307,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; @@ -336,7 +338,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); llc_pdu_decode_pf_bit(skb, &f_bit); - nskb = llc_alloc_frame(sk, llc->dev); + nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); @@ -424,7 +427,7 @@ int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock *sk, struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -459,7 +462,7 @@ int llc_conn_ac_send_rej_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -483,7 +486,7 @@ int llc_conn_ac_send_rej_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -507,7 +510,7 @@ int llc_conn_ac_send_rej_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -531,7 +534,7 @@ int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -555,7 +558,7 @@ int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -579,7 +582,7 @@ int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -615,7 +618,7 @@ int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -639,7 +642,7 @@ int llc_conn_ac_send_rr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -663,7 +666,7 @@ int llc_conn_ac_send_rr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -688,7 +691,7 @@ int llc_conn_ac_send_ack_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -712,7 +715,7 @@ int llc_conn_ac_send_rr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -736,7 +739,7 @@ int llc_conn_ac_send_ack_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -770,7 +773,7 @@ int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -799,7 +802,7 @@ int llc_conn_ac_send_ua_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) u8 f_bit; int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); llc_pdu_decode_pf_bit(skb, &f_bit); if (nskb) { @@ -956,7 +959,7 @@ static int llc_conn_ac_send_rr_rsp_f_set_ackpf(struct sock *sk, { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c index 248b5903bb1..50d5b10e23a 100644 --- a/net/llc/llc_core.c +++ b/net/llc/llc_core.c @@ -25,8 +25,6 @@ LIST_HEAD(llc_sap_list); DEFINE_RWLOCK(llc_sap_list_lock); -unsigned char llc_station_mac_sa[ETH_ALEN]; - /** * llc_sap_alloc - allocates and initializes sap. * @@ -37,8 +35,8 @@ static struct llc_sap *llc_sap_alloc(void) struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC); if (sap) { + /* sap->laddr.mac - leave as a null, it's filled by bind */ sap->state = LLC_SAP_STATE_ACTIVE; - memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN); rwlock_init(&sap->sk_list.lock); atomic_set(&sap->refcnt, 1); } @@ -167,10 +165,6 @@ static int __init llc_init(void) if (dev != NULL) dev = next_net_device(dev); - if (dev != NULL) - memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN); - else - memset(llc_station_mac_sa, 0, ETH_ALEN); dev_add_pack(&llc_packet_type); dev_add_pack(&llc_tr_packet_type); return 0; @@ -185,7 +179,6 @@ static void __exit llc_exit(void) module_init(llc_init); module_exit(llc_exit); -EXPORT_SYMBOL(llc_station_mac_sa); EXPORT_SYMBOL(llc_sap_list); EXPORT_SYMBOL(llc_sap_list_lock); EXPORT_SYMBOL(llc_sap_find); diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c index c40c9b2a345..bfd2567dd36 100644 --- a/net/llc/llc_input.c +++ b/net/llc/llc_input.c @@ -117,8 +117,12 @@ static inline int llc_fixup_skb(struct sk_buff *skb) skb_pull(skb, llc_len); if (skb->protocol == htons(ETH_P_802_2)) { __be16 pdulen = eth_hdr(skb)->h_proto; - u16 data_size = ntohs(pdulen) - llc_len; + s32 data_size = ntohs(pdulen) - llc_len; + if (data_size < 0 || + ((skb_tail_pointer(skb) - + (u8 *)pdu) - llc_len) < data_size) + return 0; if (unlikely(pskb_trim_rcsum(skb, data_size))) return 0; } diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c index fa8324396db..2e6cb79196b 100644 --- a/net/llc/llc_pdu.c +++ b/net/llc/llc_pdu.c @@ -241,7 +241,7 @@ void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb, struct llc_pdu_sn *prev_pdu, FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw); FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw); FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw); - skb_put(skb, 5); + skb_put(skb, sizeof(struct llc_frmr_info)); } /** diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c index ac3d93b210d..a94bd56bcac 100644 --- a/net/llc/llc_s_ac.c +++ b/net/llc/llc_s_ac.c @@ -103,7 +103,8 @@ int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb) llc_pdu_decode_sa(skb, mac_da); llc_pdu_decode_da(skb, mac_sa); llc_pdu_decode_ssap(skb, &dsap); - nskb = llc_alloc_frame(NULL, skb->dev); + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap, @@ -144,11 +145,15 @@ int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb) u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap; struct sk_buff *nskb; int rc = 1; + u32 data_size; llc_pdu_decode_sa(skb, mac_da); llc_pdu_decode_da(skb, mac_sa); llc_pdu_decode_ssap(skb, &dsap); - nskb = llc_alloc_frame(NULL, skb->dev); + + /* The test request command is type U (llc_len = 3) */ + data_size = ntohs(eth_hdr(skb)->h_proto) - 3; + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap, diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c index 2525165e2e8..e2ddde75501 100644 --- a/net/llc/llc_sap.c +++ b/net/llc/llc_sap.c @@ -24,20 +24,41 @@ #include <net/tcp_states.h> #include <linux/llc.h> +static int llc_mac_header_len(unsigned short devtype) +{ + switch (devtype) { + case ARPHRD_ETHER: + case ARPHRD_LOOPBACK: + return sizeof(struct ethhdr); +#ifdef CONFIG_TR + case ARPHRD_IEEE802_TR: + return sizeof(struct trh_hdr); +#endif + } + return 0; +} + /** * llc_alloc_frame - allocates sk_buff for frame * @dev: network device this skb will be sent over + * @type: pdu type to allocate + * @data_size: data size to allocate * * Allocates an sk_buff for frame and initializes sk_buff fields. * Returns allocated skb or %NULL when out of memory. */ -struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev) +struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev, + u8 type, u32 data_size) { - struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC); + int hlen = type == LLC_PDU_TYPE_U ? 3 : 4; + struct sk_buff *skb; + + hlen += llc_mac_header_len(dev->type); + skb = alloc_skb(hlen + data_size, GFP_ATOMIC); if (skb) { skb_reset_mac_header(skb); - skb_reserve(skb, 50); + skb_reserve(skb, hlen); skb_reset_network_header(skb); skb_reset_transport_header(skb); skb->protocol = htons(ETH_P_802_2); diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 6f2ea209032..83da1333949 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -253,13 +253,14 @@ static int llc_station_ac_inc_xid_r_cnt_by_1(struct sk_buff *skb) static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb) { int rc = 1; - struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev); + struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD); llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); @@ -274,7 +275,8 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb) { u8 mac_da[ETH_ALEN], dsap; int rc = 1; - struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev); + struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; @@ -283,7 +285,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb) llc_pdu_decode_ssap(skb, &dsap); llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP); llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); @@ -298,7 +300,12 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb) { u8 mac_da[ETH_ALEN], dsap; int rc = 1; - struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev); + u32 data_size; + struct sk_buff *nskb; + + /* The test request command is type U (llc_len = 3) */ + data_size = ntohs(eth_hdr(skb)->h_proto) - 3; + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size); if (!nskb) goto out; @@ -307,7 +314,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb) llc_pdu_decode_ssap(skb, &dsap); llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP); llc_pdu_init_as_test_rsp(nskb, skb); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 28bcdf9fc3d..8e586390a2e 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -286,6 +286,18 @@ static int ieee80211_open(struct net_device *dev) if (need_hw_reconfig) ieee80211_hw_config(local); + /* + * ieee80211_sta_work is disabled while network interface + * is down. Therefore, some configuration changes may not + * yet be effective. Trigger execution of ieee80211_sta_work + * to fix this. + */ + if(sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + queue_work(local->hw.workqueue, &ifsta->work); + } + netif_start_queue(dev); return 0; diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index 9aeed532022..e0c72d04584 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -319,7 +319,7 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf; struct ieee80211_if_sta *ifsta = &sdata->u.sta; bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0; - bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0; + bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0; DECLARE_MAC_BUF(mac); u32 changed = 0; @@ -335,16 +335,15 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata, changed |= BSS_CHANGED_ERP_CTS_PROT; } - if (preamble_mode != bss_conf->use_short_preamble) { + if (use_short_preamble != bss_conf->use_short_preamble) { if (net_ratelimit()) { printk(KERN_DEBUG "%s: switched to %s barker preamble" " (BSSID=%s)\n", sdata->dev->name, - (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ? - "short" : "long", + use_short_preamble ? "short" : "long", print_mac(mac, ifsta->bssid)); } - bss_conf->use_short_preamble = preamble_mode; + bss_conf->use_short_preamble = use_short_preamble; changed |= BSS_CHANGED_ERP_PREAMBLE; } diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index e88e96af613..8599068050e 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid); static int __init nf_conntrack_standalone_init(void) { #ifdef CONFIG_PROC_FS - struct proc_dir_entry *proc, *proc_stat; + struct proc_dir_entry *proc; #endif int ret = 0; @@ -407,12 +407,9 @@ static int __init nf_conntrack_standalone_init(void) proc = proc_net_fops_create(&init_net, "nf_conntrack", 0440, &ct_file_ops); if (!proc) goto cleanup_init; - proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, init_net.proc_net_stat); - if (!proc_stat) + if (!proc_create("nf_conntrack", S_IRUGO, + init_net.proc_net_stat, &ct_cpu_seq_fops)) goto cleanup_proc; - - proc_stat->proc_fops = &ct_cpu_seq_fops; - proc_stat->owner = THIS_MODULE; #endif #ifdef CONFIG_SYSCTL nf_ct_sysctl_header = register_sysctl_paths(nf_ct_path, diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index cec9976aecb..bc11d709203 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -168,13 +168,9 @@ static const struct file_operations nflog_file_ops = { int __init netfilter_log_init(void) { #ifdef CONFIG_PROC_FS - struct proc_dir_entry *pde; - - pde = create_proc_entry("nf_log", S_IRUGO, proc_net_netfilter); - if (!pde) + if (!proc_create("nf_log", S_IRUGO, + proc_net_netfilter, &nflog_file_ops)) return -1; - - pde->proc_fops = &nflog_file_ops; #endif return 0; } diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c index ddc80ea114c..bbd26893c0c 100644 --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -348,12 +348,9 @@ static const struct file_operations nfqueue_file_ops = { int __init netfilter_queue_init(void) { #ifdef CONFIG_PROC_FS - struct proc_dir_entry *pde; - - pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter); - if (!pde) + if (!proc_create("nf_queue", S_IRUGO, + proc_net_netfilter, &nfqueue_file_ops)) return -1; - pde->proc_fops = &nfqueue_file_ops; #endif return 0; } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index bf3f19b21fe..b8173af8c24 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -923,9 +923,6 @@ static const struct file_operations nful_file_ops = { static int __init nfnetlink_log_init(void) { int i, status = -ENOMEM; -#ifdef CONFIG_PROC_FS - struct proc_dir_entry *proc_nful; -#endif for (i = 0; i < INSTANCE_BUCKETS; i++) INIT_HLIST_HEAD(&instance_table[i]); @@ -943,11 +940,9 @@ static int __init nfnetlink_log_init(void) } #ifdef CONFIG_PROC_FS - proc_nful = create_proc_entry("nfnetlink_log", 0440, - proc_net_netfilter); - if (!proc_nful) + if (!proc_create("nfnetlink_log", 0440, + proc_net_netfilter, &nful_file_ops)) goto cleanup_subsys; - proc_nful->proc_fops = &nful_file_ops; #endif return status; diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 012cb691082..10522c04ed2 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -896,9 +896,6 @@ static const struct file_operations nfqnl_file_ops = { static int __init nfnetlink_queue_init(void) { int i, status = -ENOMEM; -#ifdef CONFIG_PROC_FS - struct proc_dir_entry *proc_nfqueue; -#endif for (i = 0; i < INSTANCE_BUCKETS; i++) INIT_HLIST_HEAD(&instance_table[i]); @@ -911,11 +908,9 @@ static int __init nfnetlink_queue_init(void) } #ifdef CONFIG_PROC_FS - proc_nfqueue = create_proc_entry("nfnetlink_queue", 0440, - proc_net_netfilter); - if (!proc_nfqueue) + if (!proc_create("nfnetlink_queue", 0440, + proc_net_netfilter, &nfqnl_file_ops)) goto cleanup_subsys; - proc_nfqueue->proc_fops = &nfqnl_file_ops; #endif register_netdevice_notifier(&nfqnl_dev_notifier); diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 5418ce59ac3..dc29007c52c 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -237,14 +237,14 @@ static int htable_create_v0(struct xt_hashlimit_info *minfo, int family) hinfo->family = family; hinfo->rnd_initialized = 0; spin_lock_init(&hinfo->lock); - hinfo->pde = create_proc_entry(minfo->name, 0, - family == AF_INET ? hashlimit_procdir4 : - hashlimit_procdir6); + hinfo->pde = proc_create(minfo->name, 0, + family == AF_INET ? hashlimit_procdir4 : + hashlimit_procdir6, + &dl_file_ops); if (!hinfo->pde) { vfree(hinfo); return -1; } - hinfo->pde->proc_fops = &dl_file_ops; hinfo->pde->data = hinfo; setup_timer(&hinfo->timer, htable_gc, (unsigned long )hinfo); @@ -301,14 +301,14 @@ static int htable_create(struct xt_hashlimit_mtinfo1 *minfo, hinfo->rnd_initialized = 0; spin_lock_init(&hinfo->lock); - hinfo->pde = create_proc_entry(minfo->name, 0, - family == AF_INET ? hashlimit_procdir4 : - hashlimit_procdir6); + hinfo->pde = proc_create(minfo->name, 0, + family == AF_INET ? hashlimit_procdir4 : + hashlimit_procdir6, + &dl_file_ops); if (hinfo->pde == NULL) { vfree(hinfo); return -1; } - hinfo->pde->proc_fops = &dl_file_ops; hinfo->pde->data = hinfo; setup_timer(&hinfo->timer, htable_gc, (unsigned long)hinfo); diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 4a31a81059a..063cbc5c26b 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -598,17 +598,24 @@ static int rose_release(struct socket *sock) if (sk == NULL) return 0; + sock_hold(sk); + sock_orphan(sk); + lock_sock(sk); rose = rose_sk(sk); switch (rose->state) { case ROSE_STATE_0: + release_sock(sk); rose_disconnect(sk, 0, -1, -1); + lock_sock(sk); rose_destroy_socket(sk); break; case ROSE_STATE_2: rose->neighbour->use--; + release_sock(sk); rose_disconnect(sk, 0, -1, -1); + lock_sock(sk); rose_destroy_socket(sk); break; @@ -633,6 +640,8 @@ static int rose_release(struct socket *sock) } sock->sk = NULL; + release_sock(sk); + sock_put(sk); return 0; } diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 10b5c0887ff..b741618e4d5 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -184,10 +184,22 @@ static inline int qdisc_restart(struct net_device *dev) void __qdisc_run(struct net_device *dev) { - do { - if (!qdisc_restart(dev)) + unsigned long start_time = jiffies; + + while (qdisc_restart(dev)) { + if (netif_queue_stopped(dev)) + break; + + /* + * Postpone processing if + * 1. another process needs the CPU; + * 2. we've been doing it for too long. + */ + if (need_resched() || jiffies != start_time) { + netif_schedule(dev); break; - } while (!netif_queue_stopped(dev)); + } + } clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state); } diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 41a049f50f5..c2fef7b12dc 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1630,6 +1630,12 @@ static inline u32 file_to_av(struct file *file) else av |= FILE__WRITE; } + if (!av) { + /* + * Special file opened with flags 3 for ioctl-only use. + */ + av = FILE__IOCTL; + } return av; } |