diff options
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700.h | 3 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_core.c | 108 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_devices.c | 2 |
3 files changed, 110 insertions, 3 deletions
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 66d4dc6ba46..cc0c51d82f2 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -31,6 +31,8 @@ extern int dvb_usb_dib0700_debug; // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) #define REQUEST_SET_RC 0x11 +#define REQUEST_NEW_I2C_READ 0x12 +#define REQUEST_NEW_I2C_WRITE 0x13 #define REQUEST_GET_VERSION 0x15 struct dib0700_state { @@ -39,6 +41,7 @@ struct dib0700_state { u8 rc_toggle; u8 rc_counter; u8 is_dib7000pc; + u8 fw_use_new_i2c_api; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 595a04696c8..4daac864200 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -82,9 +82,98 @@ int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_ } /* - * I2C master xfer function + * I2C master xfer function (supported in 1.20 firmware) */ -static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num) +static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + /* The new i2c firmware messages are more reliable and in particular + properly support i2c read calls not preceded by a write */ + + struct dvb_usb_device *d = i2c_get_adapdata(adap); + uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */ + uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */ + uint8_t en_start = 0; + uint8_t en_stop = 0; + uint8_t buf[255]; /* TBV: malloc ? */ + int result, i; + + /* Ensure nobody else hits the i2c bus while we're sending our + sequence of messages, (such as the remote control thread) */ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (i == 0) { + /* First message in the transaction */ + en_start = 1; + } else if (!(msg[i].flags & I2C_M_NOSTART)) { + /* Device supports repeated-start */ + en_start = 1; + } else { + /* Not the first packet and device doesn't support + repeated start */ + en_start = 0; + } + if (i == (num - 1)) { + /* Last message in the transaction */ + en_stop = 1; + } + + if (msg[i].flags & I2C_M_RD) { + /* Read request */ + u16 index, value; + uint8_t i2c_dest; + + i2c_dest = (msg[i].addr << 1); + value = ((en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F)) << 8 | i2c_dest; + /* I2C ctrl + FE bus; */ + index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + + result = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_READ, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, msg[i].buf, + msg[i].len, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c read error (status = %d)\n", result); + break; + } + } else { + /* Write request */ + buf[0] = REQUEST_NEW_I2C_WRITE; + buf[1] = (msg[i].addr << 1); + buf[2] = (en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F); + /* I2C ctrl + FE bus; */ + buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + /* The Actual i2c payload */ + memcpy(&buf[4], msg[i].buf, msg[i].len); + + result = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_WRITE, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, buf, msg[i].len + 4, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + err("i2c write error (status = %d)\n", result); + break; + } + } + } + mutex_unlock(&d->i2c_mutex); + return i; +} + +/* + * I2C master xfer function (pre-1.20 firmware) + */ +static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, + struct i2c_msg *msg, int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); int i,len; @@ -124,6 +213,21 @@ static int dib0700_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg *msg,int num return i; } +static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + + if (st->fw_use_new_i2c_api == 1) { + /* User running at least fw 1.20 */ + return dib0700_i2c_xfer_new(adap, msg, num); + } else { + /* Use legacy calls */ + return dib0700_i2c_xfer_legacy(adap, msg, num); + } +} + static u32 dib0700_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 110d9344bc9..2555e53b31d 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1127,7 +1127,7 @@ MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ .usb_ctrl = DEVICE_SPECIFIC, \ - .firmware = "dvb-usb-dib0700-1.10.fw", \ + .firmware = "dvb-usb-dib0700-1.20.fw", \ .download_firmware = dib0700_download_firmware, \ .no_reconnect = 1, \ .size_of_priv = sizeof(struct dib0700_state), \ |