summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap1/gpio15xx.c14
-rw-r--r--arch/arm/mach-omap1/gpio16xx.c19
-rw-r--r--arch/arm/mach-omap1/gpio7xx.c19
-rw-r--r--arch/arm/mach-omap2/gpio.c16
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h10
-rw-r--r--drivers/gpio/gpio-omap.c243
6 files changed, 121 insertions, 200 deletions
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 04c4b04cf54..a622d567b53 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -34,11 +34,18 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+ .direction = OMAP_MPUIO_IO_CNTL,
+ .datain = OMAP_MPUIO_INPUT_LATCH,
+ .dataout = OMAP_MPUIO_OUTPUT,
+};
+
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
+ .regs = &omap15xx_mpuio_regs,
};
static struct __initdata platform_device omap15xx_mpu_gpio = {
@@ -64,10 +71,17 @@ static struct __initdata resource omap15xx_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+ .direction = OMAP1510_GPIO_DIR_CONTROL,
+ .datain = OMAP1510_GPIO_DATA_INPUT,
+ .dataout = OMAP1510_GPIO_DATA_OUTPUT,
+};
+
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1510,
.bank_width = 16,
+ .regs = &omap15xx_gpio_regs,
};
static struct __initdata platform_device omap15xx_gpio = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5dd0d4c82b2..4ff6ff36ab7 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -37,11 +37,18 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+ .direction = OMAP_MPUIO_IO_CNTL,
+ .datain = OMAP_MPUIO_INPUT_LATCH,
+ .dataout = OMAP_MPUIO_OUTPUT,
+};
+
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
+ .regs = &omap16xx_mpuio_regs,
};
static struct __initdata platform_device omap16xx_mpu_gpio = {
@@ -67,10 +74,19 @@ static struct __initdata resource omap16xx_gpio1_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+ .direction = OMAP1610_GPIO_DIRECTION,
+ .set_dataout = OMAP1610_GPIO_SET_DATAOUT,
+ .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT,
+ .datain = OMAP1610_GPIO_DATAIN,
+ .dataout = OMAP1610_GPIO_DATAOUT,
+};
+
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct __initdata platform_device omap16xx_gpio1 = {
@@ -100,6 +116,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 16,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct __initdata platform_device omap16xx_gpio2 = {
@@ -129,6 +146,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct __initdata platform_device omap16xx_gpio3 = {
@@ -158,6 +176,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 48,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct __initdata platform_device omap16xx_gpio4 = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 1204c8b871a..efe4dccaa4f 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -39,11 +39,18 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+ .direction = OMAP_MPUIO_IO_CNTL / 2,
+ .datain = OMAP_MPUIO_INPUT_LATCH / 2,
+ .dataout = OMAP_MPUIO_OUTPUT / 2,
+};
+
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 32,
.bank_stride = 2,
+ .regs = &omap7xx_mpuio_regs,
};
static struct __initdata platform_device omap7xx_mpu_gpio = {
@@ -69,10 +76,17 @@ static struct __initdata resource omap7xx_gpio1_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+ .direction = OMAP7XX_GPIO_DIR_CONTROL,
+ .datain = OMAP7XX_GPIO_DATA_INPUT,
+ .dataout = OMAP7XX_GPIO_DATA_OUTPUT,
+};
+
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio1 = {
@@ -102,6 +116,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio2 = {
@@ -131,6 +146,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 64,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio3 = {
@@ -160,6 +176,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 96,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio4 = {
@@ -189,6 +206,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
.virtual_irq_start = IH_GPIO_BASE + 128,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio5 = {
@@ -218,6 +236,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
.virtual_irq_start = IH_GPIO_BASE + 160,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct __initdata platform_device omap7xx_gpio6 = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9529842ae05..357e06956b0 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -61,13 +61,29 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+ pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("gpio%d: Memory allocation failed\n", id);
+ return -ENOMEM;
+ }
+
switch (oh->class->rev) {
case 0:
case 1:
pdata->bank_type = METHOD_GPIO_24XX;
+ pdata->regs->direction = OMAP24XX_GPIO_OE;
+ pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
+ pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
+ pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
+ pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
break;
case 2:
pdata->bank_type = METHOD_GPIO_44XX;
+ pdata->regs->direction = OMAP4_GPIO_OE;
+ pdata->regs->datain = OMAP4_GPIO_DATAIN;
+ pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
+ pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
+ pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
break;
default:
WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index ec97e00cb58..268bccd0f7f 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -174,12 +174,22 @@ struct omap_gpio_dev_attr {
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
};
+struct omap_gpio_reg_offs {
+ u16 direction;
+ u16 datain;
+ u16 dataout;
+ u16 set_dataout;
+ u16 clr_dataout;
+};
+
struct omap_gpio_platform_data {
u16 virtual_irq_start;
int bank_type;
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+
+ struct omap_gpio_reg_offs *regs;
};
/* TODO: Analyze removing gpio_bank_count usage from driver code */
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 25a7ee6bddb..945642143e1 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -55,6 +55,10 @@ struct gpio_bank {
bool dbck_flag;
int stride;
u32 width;
+
+ void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+
+ struct omap_gpio_reg_offs *regs;
};
#ifdef CONFIG_ARCH_OMAP3
@@ -125,41 +129,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
void __iomem *reg = bank->base;
u32 l;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
+ reg += bank->regs->direction;
l = __raw_readl(reg);
if (is_input)
l |= 1 << gpio;
@@ -168,163 +138,52 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
__raw_writel(l, reg);
}
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+
+/* set data out value using dedicate set/clear register */
+static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
{
void __iomem *reg = bank->base;
- u32 l = 0;
+ u32 l = GPIO_BIT(bank, gpio);
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_DATAOUT;
- else
- reg += OMAP1610_GPIO_CLEAR_DATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETDATAOUT;
- else
- reg += OMAP24XX_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_SETDATAOUT;
- else
- reg += OMAP4_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
+ if (enable)
+ reg += bank->regs->set_dataout;
+ else
+ reg += bank->regs->clr_dataout;
+
+ __raw_writel(l, reg);
+}
+
+/* set data out value using mask register */
+static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
+{
+ void __iomem *reg = bank->base + bank->regs->dataout;
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 l;
+
+ l = __raw_readl(reg);
+ if (enable)
+ l |= gpio_bit;
+ else
+ l &= ~gpio_bit;
__raw_writel(l, reg);
}
static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
{
- void __iomem *reg;
+ void __iomem *reg = bank->base + bank->regs->datain;
if (check_gpio(gpio) < 0)
return -EINVAL;
- reg = bank->base;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_INPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAIN;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_INPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAIN;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAIN;
- break;
-#endif
- default:
- return -EINVAL;
- }
- return (__raw_readl(reg)
- & (GPIO_BIT(bank, gpio))) != 0;
+
+ return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
{
- void __iomem *reg;
+ void __iomem *reg = bank->base + bank->regs->dataout;
if (check_gpio(gpio) < 0)
return -EINVAL;
- reg = bank->base;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAOUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAOUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAOUT;
- break;
-#endif
- default:
- return -EINVAL;
- }
return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
@@ -1281,31 +1140,8 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
static int gpio_is_input(struct gpio_bank *bank, int mask)
{
- void __iomem *reg = bank->base;
+ void __iomem *reg = bank->base + bank->regs->direction;
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
- default:
- WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
- return -EINVAL;
- }
return __raw_readl(reg) & mask;
}
@@ -1334,7 +1170,7 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
+ bank->set_dataout(bank, offset, value);
_set_gpio_direction(bank, offset, 0);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -1368,7 +1204,7 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
+ bank->set_dataout(bank, offset, value);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1564,6 +1400,13 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->stride = pdata->bank_stride;
bank->width = pdata->bank_width;
+ bank->regs = pdata->regs;
+
+ if (bank->regs->set_dataout && bank->regs->clr_dataout)
+ bank->set_dataout = _set_gpio_dataout_reg;
+ else
+ bank->set_dataout = _set_gpio_dataout_mask;
+
spin_lock_init(&bank->lock);
/* Static mapping, never released */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 11:59:22 +0000