diff options
| -rw-r--r-- | arch/mips/Kconfig | 1001 | ||||
| -rw-r--r-- | arch/mips/ddb5xxx/Kconfig | 4 | ||||
| -rw-r--r-- | arch/mips/gt64120/ev64120/Kconfig | 3 | ||||
| -rw-r--r-- | arch/mips/ite-boards/Kconfig | 8 | ||||
| -rw-r--r-- | arch/mips/jazz/Kconfig | 33 | ||||
| -rw-r--r-- | arch/mips/lasat/Kconfig | 15 | ||||
| -rw-r--r-- | arch/mips/momentum/Kconfig | 6 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/Kconfig | 3 | ||||
| -rw-r--r-- | arch/mips/tx4927/Kconfig | 3 | ||||
| -rw-r--r-- | arch/mips/vr41xx/Kconfig | 88 |
10 files changed, 610 insertions, 554 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7f826da6e59..bafd7755380 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -4,230 +4,120 @@ config MIPS # Horrible source of confusion. Die, die, die ... select EMBEDDED -# shouldn't it be per-subarchitecture? -config ARCH_MAY_HAVE_PC_FDC - bool - default y - mainmenu "Linux/MIPS Kernel Configuration" source "init/Kconfig" -# -# These two indicate any levelof the MIPS32 and MIPS64 architecture -# -config CPU_MIPS32 - bool - default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 - -config CPU_MIPS64 - bool - default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 - -# -# These two indicate the revision of the architecture, either 32 bot 64 bit. -# -config CPU_MIPSR1 - bool - default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 - -config CPU_MIPSR2 - bool - default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 - -config SYS_SUPPORTS_32BIT_KERNEL - bool -config SYS_SUPPORTS_64BIT_KERNEL - bool -config CPU_SUPPORTS_32BIT_KERNEL - bool -config CPU_SUPPORTS_64BIT_KERNEL - bool - -menu "Kernel type" - -choice - - prompt "Kernel code model" - help - You should only select this option if you have a workload that - actually benefits from 64-bit processing or if your machine has - large memory. You will only be presented a single option in this - menu if your system does not support both 32-bit and 64-bit kernels. - -config 32BIT - bool "32-bit kernel" - depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL - select TRAD_SIGNALS - help - Select this option if you want to build a 32-bit kernel. - -config 64BIT - bool "64-bit kernel" - depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL - help - Select this option if you want to build a 64-bit kernel. - -endchoice - -endmenu - menu "Machine selection" -config MACH_JAZZ - bool "Support for the Jazz family of machines" - select ARC - select ARC32 - select ARCH_MAY_HAVE_PC_FDC - select GENERIC_ISA_DMA - select I8259 - select ISA - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - help - This a family of machines based on the MIPS R4030 chipset which was - used by several vendors to build RISC/os and Windows NT workstations. - Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and - Olivetti M700-10 workstations. +choice + prompt "System type" + default SGI_IP22 -config ACER_PICA_61 - bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" - depends on MACH_JAZZ && EXPERIMENTAL +config MIPS_MTX1 + bool "Support for 4G Systems MTX-1 board" select DMA_NONCOHERENT - help - This is a machine with a R4400 133/150 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. + select HW_HAS_PCI + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_MAGNUM_4000 - bool "Support for MIPS Magnum 4000" - depends on MACH_JAZZ +config MIPS_BOSPORUS + bool "AMD Alchemy Bosporus board" + select SOC_AU1500 select DMA_NONCOHERENT - help - This is a machine with a R4000 100 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. + select SYS_SUPPORTS_LITTLE_ENDIAN -config OLIVETTI_M700 - bool "Support for Olivetti M700-10" - depends on MACH_JAZZ +config MIPS_PB1000 + bool "AMD Alchemy PB1000 board" + select SOC_AU1000 select DMA_NONCOHERENT - help - This is a machine with a R4000 100 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. - -config MACH_VR41XX - bool "Support for NEC VR4100 series based machines" - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN -config NEC_CMBVR4133 - bool "Support for NEC CMB-VR4133" - depends on MACH_VR41XX - select CPU_VR41XX +config MIPS_PB1100 + bool "AMD Alchemy PB1100 board" + select SOC_AU1100 select DMA_NONCOHERENT - select IRQ_CPU select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN -config ROCKHOPPER - bool "Support for Rockhopper baseboard" - depends on NEC_CMBVR4133 - select I8259 - select HAVE_STD_PC_SERIAL_PORT +config MIPS_PB1500 + bool "AMD Alchemy PB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN -config CASIO_E55 - bool "Support for CASIO CASSIOPEIA E-10/15/55/65" - depends on MACH_VR41XX - select CPU_LITTLE_ENDIAN +config MIPS_PB1550 + bool "AMD Alchemy PB1550 board" + select SOC_AU1550 select DMA_NONCOHERENT - select IRQ_CPU - select ISA + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN -config IBM_WORKPAD - bool "Support for IBM WorkPad z50" - depends on MACH_VR41XX - select CPU_LITTLE_ENDIAN +config MIPS_PB1200 + bool "AMD Alchemy PB1200 board" + select SOC_AU1200 select DMA_NONCOHERENT - select IRQ_CPU - select ISA + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN -config TANBAC_TB022X - bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM" - depends on MACH_VR41XX - select CPU_LITTLE_ENDIAN +config MIPS_DB1000 + bool "AMD Alchemy DB1000 board" + select SOC_AU1000 select DMA_NONCOHERENT - select IRQ_CPU select HW_HAS_PCI - help - The TANBAC VR4131 multichip module(TB0225) and - the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms - manufactured by TANBAC. - Please refer to <http://www.tanbac.co.jp/> - about VR4131 multichip module and VR4131DIMM. - -config TANBAC_TB0226 - bool "Support for TANBAC Mbase(TB0226)" - depends on TANBAC_TB022X - select GPIO_VR41XX - help - The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC. - Please refer to <http://www.tanbac.co.jp/> about Mbase. - -config TANBAC_TB0287 - bool "Support for TANBAC Mini-ITX DIMM base(TB0287)" - depends on TANBAC_TB022X - help - The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC. - Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base. + select SYS_SUPPORTS_LITTLE_ENDIAN -config VICTOR_MPC30X - bool "Support for Victor MP-C303/304" - depends on MACH_VR41XX - select CPU_LITTLE_ENDIAN +config MIPS_DB1100 + bool "AMD Alchemy DB1100 board" + select SOC_AU1100 select DMA_NONCOHERENT - select IRQ_CPU - select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN -config ZAO_CAPCELLA - bool "Support for ZAO Networks Capcella" - depends on MACH_VR41XX - select CPU_LITTLE_ENDIAN +config MIPS_DB1500 + bool "AMD Alchemy DB1500 board" + select SOC_AU1500 select DMA_NONCOHERENT - select IRQ_CPU select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN -config PCI_VR41XX - bool "Add PCI control unit support of NEC VR4100 series" - depends on MACH_VR41XX && HW_HAS_PCI - default y - select PCI +config MIPS_DB1550 + bool "AMD Alchemy DB1550 board" + select SOC_AU1550 + select HW_HAS_PCI + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN -config VRC4173 - tristate "Add NEC VRC4173 companion chip support" - depends on MACH_VR41XX && PCI_VR41XX - ---help--- - The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. +config MIPS_DB1200 + bool "AMD Alchemy DB1200 board" + select SOC_AU1200 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN -config TOSHIBA_JMR3927 - bool "Support for Toshiba JMR-TX3927 board" +config MIPS_MIRAGE + bool "AMD Alchemy Mirage board" select DMA_NONCOHERENT - select HW_HAS_PCI - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_COBALT bool "Support for Cobalt Server" - depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI select I8259 select IRQ_CPU + select MIPS_GT64111 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN config MACH_DECSTATION bool "Support for DECstations" @@ -237,7 +127,8 @@ config MACH_DECSTATION select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - ---help--- + select SYS_SUPPORTS_LITTLE_ENDIAN + help This enables support for DEC's MIPS based workstations. For details see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the DECstation porting pages on <http://decstation.unix-ag.org/>. @@ -256,11 +147,11 @@ config MIPS_EV64120 bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT - select IRQ_CPU select HW_HAS_PCI select MIPS_GT64120 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help This is an evaluation board based on the Galileo GT-64120 single-chip system controller that contains a MIPS R5000 compatible @@ -268,10 +159,6 @@ config MIPS_EV64120 <http://www.marvell.com/>. Say Y here if you wish to build a kernel for this platform. -config EVB_PCI1 - bool "Enable Second PCI (PCI1)" - depends on MIPS_EV64120 - config MIPS_EV96100 bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -282,7 +169,8 @@ config MIPS_EV96100 select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_BIG_ENDIAN help This is an evaluation board based on the Galileo GT-96100 LAN/WAN communications controllers containing a MIPS R5000 compatible core @@ -293,8 +181,10 @@ config MIPS_IVR bool "Support for Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI + select ITE_BOARD_GEN select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN help This is an evaluation board built by Globespan to showcase thir iVR (Internet Video Recorder) design. It utilizes a QED RM5231 @@ -302,37 +192,14 @@ config MIPS_IVR located at <http://www.globespan.net/>. Say Y here if you wish to build a kernel for this platform. -config LASAT - bool "Support for LASAT Networks platforms" - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_GT64120 - select R5000_CPU_SCACHE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - -config PICVUE - tristate "PICVUE LCD display driver" - depends on LASAT - -config PICVUE_PROC - tristate "PICVUE LCD display driver /proc interface" - depends on PICVUE - -config DS1603 - bool "DS1603 RTC driver" - depends on LASAT - -config LASAT_SYSCTL - bool "LASAT sysctl interface" - depends on LASAT - config MIPS_ITE8172 bool "Support for ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI + select ITE_BOARD_GEN select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN help Ths is an evaluation board made by ITE <http://www.ite.com.tw/> with ATX form factor that utilizes a MIPS R5000 to work with its @@ -340,25 +207,49 @@ config MIPS_ITE8172 either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build a kernel for this platform. -config IT8172_REVC - bool "Support for older IT8172 (Rev C)" - depends on MIPS_ITE8172 +config MACH_JAZZ + bool "Support for the Jazz family of machines" + select ARC + select ARC32 + select ARCH_MAY_HAVE_PC_FDC + select GENERIC_ISA_DMA + select I8259 + select ISA + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL help - Say Y here to support the older, Revision C version of the Integrated - Technology Express, Inc. ITE8172 SBC. Vendor page at - <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the - board at <http://www.mvista.com/partners/semiconductor/ite.html>. + This a family of machines based on the MIPS R4030 chipset which was + used by several vendors to build RISC/os and Windows NT workstations. + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and + Olivetti M700-10 workstations. + +config LASAT + bool "Support for LASAT Networks platforms" + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_GT64120 + select MIPS_NILE4 + select R5000_CPU_SCACHE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_ATLAS bool "Support for MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT + select IRQ_CPU select HW_HAS_PCI + select MIPS_BOARDS_GEN + select MIPS_BONITO64 select MIPS_GT64120 + select MIPS_MSC select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the MIPS Technologies Atlas evaluation board. @@ -373,10 +264,15 @@ config MIPS_MALTA select GENERIC_ISA_DMA select HW_HAS_PCI select I8259 + select MIPS_BOARDS_GEN + select MIPS_BONITO64 select MIPS_GT64120 + select MIPS_MSC select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the MIPS Technologies Malta evaluation board. @@ -386,53 +282,57 @@ config MIPS_SEAD depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT + select MIPS_BOARDS_GEN select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the MIPS Technologies SEAD evaluation board. -config MOMENCO_OCELOT - bool "Support for Momentum Ocelot board" +config MIPS_SIM + bool 'Support for MIPS simulator (MIPSsim)' select DMA_NONCOHERENT - select HW_HAS_PCI select IRQ_CPU - select IRQ_CPU_RM7K - select MIPS_GT64120 - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by - Momentum Computer <http://www.momenco.com/>. + This option enables support for MIPS Technologies MIPSsim software + emulator. -config MOMENCO_OCELOT_G - bool "Support for Momentum Ocelot-G board" +config MOMENCO_JAGUAR_ATX + bool "Support for Momentum Jaguar board" + select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K + select IRQ_MV64340 + select LIMITED_DMA select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help - The Ocelot is a MIPS-based Single Board Computer (SBC) made by + The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. -config MOMENCO_OCELOT_C - bool "Support for Momentum Ocelot-C board" +config MOMENCO_OCELOT + bool "Support for Momentum Ocelot board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU - select IRQ_MV64340 - select PCI_MARVELL + select IRQ_CPU_RM7K + select MIPS_GT64120 select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -450,63 +350,48 @@ config MOMENCO_OCELOT_3 select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help The Ocelot-3 is based off Discovery III System Controller and PMC-Sierra Rm79000 core. -config MIPS_SIM - bool 'Support for MIPS simulator (MIPSsim)' - select DMA_NONCOHERENT - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - help - This option enables support for MIPS Technologies MIPSsim software - emulator. - -config MOMENCO_JAGUAR_ATX - bool "Support for Momentum Jaguar board" - select BOOT_ELF32 +config MOMENCO_OCELOT_C + bool "Support for Momentum Ocelot-C board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU - select IRQ_CPU_RM7K select IRQ_MV64340 - select LIMITED_DMA select PCI_MARVELL select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help - The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by + The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. -config JAGUAR_DMALOW - bool "Low DMA Mode" - depends on MOMENCO_JAGUAR_ATX - help - Select to Y if jump JP5 is set on your board, N otherwise. Normally - the jumper is set, so if you feel unsafe, just say Y. - -config PMC_YOSEMITE - bool "Support for PMC-Sierra Yosemite eval board" - select DMA_COHERENT +config MOMENCO_OCELOT_G + bool "Support for Momentum Ocelot-G board" + select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K - select IRQ_CPU_RM9K + select PCI_MARVELL + select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help - Yosemite is an evaluation board for the RM9000x2 processor - manufactured by PMC-Sierra + The Ocelot is a MIPS-based Single Board Computer (SBC) made by + Momentum Computer <http://www.momenco.com/>. -config HYPERTRANSPORT - bool "Hypertransport Support for PMC-Sierra Yosemite" - depends on PMC_YOSEMITE +config MIPS_XXS1500 + bool "Support for MyCable XXS1500 board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_V2PCI bool "Support for Philips PNX8550 based Viper2-PCI board" @@ -521,6 +406,7 @@ config PNX8550_JBS config DDB5074 bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" depends on EXPERIMENTAL + select DDB5XXX_COMMON select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT select HW_HAS_PCI @@ -528,13 +414,15 @@ config DDB5074 select I8259 select ISA select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the VR5000-based NEC DDB Vrc-5074 evaluation board. config DDB5476 bool "Support for NEC DDB Vrc-5476" + select DDB5XXX_COMMON select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT select HW_HAS_PCI @@ -543,6 +431,7 @@ config DDB5476 select ISA select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the R5432-based NEC DDB Vrc-5476 evaluation board. @@ -553,12 +442,14 @@ config DDB5476 config DDB5477 bool "Support for NEC DDB Vrc-5477" + select DDB5XXX_COMMON select DMA_NONCOHERENT select HW_HAS_PCI select I8259 select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the R5432-based NEC DDB Vrc-5477, or Rockhopper/SolutionGear boards with R5432/R5500 CPUs. @@ -566,10 +457,26 @@ config DDB5477 Features : kernel debugging, serial terminal, NFS root fs, on-board ether port USB, AC97, PCI, etc. -config DDB5477_BUS_FREQUENCY - int "bus frequency (in kHZ, 0 for auto-detect)" - depends on DDB5477 - default 0 +config MACH_VR41XX + bool "Support for NEC VR4100 series based machines" + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + +config PMC_YOSEMITE + bool "Support for PMC-Sierra Yosemite eval board" + select DMA_COHERENT + select HW_HAS_PCI + select IRQ_CPU + select IRQ_CPU_RM7K + select IRQ_CPU_RM9K + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + help + Yosemite is an evaluation board for the RM9000x2 processor + manufactured by PMC-Sierra. config QEMU bool "Support for Qemu" @@ -581,14 +488,13 @@ config QEMU select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_HIGHMEM help - Qemu is a software emulator which among other architectures also - can simulate a MIPS32 4Kc system. This patch adds support for the - system architecture that currently is being simulated by Qemu. It - will eventually be removed again when Qemu has the capability to - simulate actual MIPS hardware platforms. More information on Qemu - can be found at http://www.linux-mips.org/wiki/Qemu. + Qemu is a software emulator which among other architectures also + can simulate a MIPS32 4Kc system. This patch adds support for the + system architecture that currently is being simulated by Qemu. It + will eventually be removed again when Qemu has the capability to + simulate actual MIPS hardware platforms. More information on Qemu + can be found at http://www.linux-mips.org/wiki/Qemu. config SGI_IP22 bool "Support for SGI IP22 (Indy/Indigo2)" @@ -596,11 +502,13 @@ config SGI_IP22 select ARC32 select BOOT_ELF32 select DMA_NONCOHERENT + select HW_HAS_EISA select IP22_CPU_SCACHE select IRQ_CPU select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help This are the SGI Indy, Challenge S and Indigo2, as well as certain OEM variants like the Tandem CMN B006S. To compile a Linux kernel @@ -610,70 +518,17 @@ config SGI_IP27 bool "Support for SGI IP27 (Origin200/2000)" select ARC select ARC64 + select BOOT_ELF64 select DMA_IP27 select HW_HAS_PCI select PCI_DOMAINS select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y here. -#config SGI_SN0_XXL -# bool "IP27 XXL" -# depends on SGI_IP27 -# This options adds support for userspace processes upto 16TB size. -# Normally the limit is just .5TB. - -config SGI_SN0_N_MODE - bool "IP27 N-Mode" - depends on SGI_IP27 - help - The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be - configured in either N-Modes which allows for more nodes or M-Mode - which allows for more memory. Your system is most probably - running in M-Mode, so you should say N here. - -config ARCH_DISCONTIGMEM_ENABLE - bool - default y if SGI_IP27 - help - Say Y to upport efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa> for more. - -config NUMA - bool "NUMA Support" - depends on SGI_IP27 - help - Say Y to compile the kernel to support NUMA (Non-Uniform Memory - Access). This option is for configuring high-end multiprocessor - server machines. If in doubt, say N. - -config MAPPED_KERNEL - bool "Mapped kernel support" - depends on SGI_IP27 - help - Change the way a Linux kernel is loaded into memory on a MIPS64 - machine. This is required in order to support text replication and - NUMA. If you need to understand it, read the source code. - -config REPLICATE_KTEXT - bool "Kernel text replication support" - depends on SGI_IP27 - help - Say Y here to enable replicating the kernel text across multiple - nodes in a NUMA cluster. This trades memory for speed. - -config REPLICATE_EXHANDLERS - bool "Exception handler replication support" - depends on SGI_IP27 - help - Say Y here to enable replicating the kernel exception handlers - across multiple nodes in a NUMA cluster. This trades memory for - speed. - config SGI_IP32 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -683,162 +538,96 @@ config SGI_IP32 select OWN_DMA select DMA_IP32 select DMA_NONCOHERENT - select HAS_TXX9_SERIAL select HW_HAS_PCI select R5000_CPU_SCACHE select RM7000_CPU_SCACHE select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN help If you want this kernel to run on SGI O2 workstation, say Y here. -config SOC_AU1200 - bool - select SOC_AU1X00 - -config SOC_AU1X00 - bool "Support for AMD/Alchemy Au1X00 SOCs" - select SYS_SUPPORTS_32BIT_KERNEL - -choice - prompt "Au1X00 SOC Type" - depends on SOC_AU1X00 - help - Say Y here to enable support for one of three AMD/Alchemy - SOCs. For additional documentation see www.amd.com. - -config SOC_AU1000 - bool "SOC_AU1000" -config SOC_AU1100 - bool "SOC_AU1100" -config SOC_AU1500 - bool "SOC_AU1500" -config SOC_AU1550 - bool "SOC_AU1550" - -config TOSHIBA_RBTX4938 - bool "Support for Toshiba RBTX4938 board" - select HAVE_STD_PC_SERIAL_PORT - select DMA_NONCOHERENT - select GENERIC_ISA_DMA - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select I8259 - select ISA +config SIBYTE_SWARM + bool "Support for Sibyte BCM91250A-SWARM" + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_SB1250 select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select TOSHIBA_BOARDS - help - This Toshiba board is based on the TX4938 processor. Say Y here to - support this machine type - -endchoice - -choice - prompt "AMD/Alchemy Au1x00 board support" - depends on SOC_AU1X00 - help - These are evaluation boards built by AMD/Alchemy to - showcase their Au1X00 Internet Edge Processors. The SOC design - is based on the MIPS32 architecture running at 266/400/500MHz - with many integrated peripherals. Further information can be - found at their website, <http://www.amd.com/>. Say Y here if you - wish to build a kernel for this platform. + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_PB1000 - bool "PB1000 board" - depends on SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI +config SIBYTE_SENTOSA + bool "Support for Sibyte BCM91250E-Sentosa" + depends on EXPERIMENTAL + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_SB1250 select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_PB1100 - bool "PB1100 board" - depends on SOC_AU1100 - select DMA_NONCOHERENT - select HW_HAS_PCI +config SIBYTE_RHONE + bool "Support for Sibyte BCM91125E-Rhone" + depends on EXPERIMENTAL + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_BCM1125H select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_PB1500 - bool "PB1500 board" - depends on SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - -config MIPS_PB1550 - bool "PB1550 board" - depends on SOC_AU1550 +config SIBYTE_CARMEL + bool "Support for Sibyte BCM91120x-Carmel" + depends on EXPERIMENTAL + select BOOT_ELF32 select DMA_COHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE + select SIBYTE_BCM1120 + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_PB1200 - bool "AMD Alchemy PB1200 board" - select SOC_AU1200 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE +config SIBYTE_PTSWARM + bool "Support for Sibyte BCM91250PT-PTSWARM" + depends on EXPERIMENTAL + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_SB1250 + select SWAP_IO_SPACE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_DB1000 - bool "DB1000 board" - depends on SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - -config MIPS_DB1100 - bool "DB1100 board" - depends on SOC_AU1100 - select DMA_NONCOHERENT - -config MIPS_DB1500 - bool "DB1500 board" - depends on SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - -config MIPS_DB1550 - bool "DB1550 board" - depends on SOC_AU1550 - select HW_HAS_PCI - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - -config MIPS_BOSPORUS - bool "Bosporus board" - depends on SOC_AU1500 - select DMA_NONCOHERENT - -config MIPS_DB1200 - bool "AMD Alchemy DB1200 board" - select SOC_AU1200 +config SIBYTE_LITTLESUR + bool "Support for Sibyte BCM91250C2-LittleSur" + depends on EXPERIMENTAL + select BOOT_ELF32 select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE + select SIBYTE_SB1250 + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN -config MIPS_MIRAGE - bool "Mirage board" - depends on SOC_AU1500 - select DMA_NONCOHERENT - -config MIPS_XXS1500 - bool "MyCable XXS1500 board" - depends on SOC_AU1500 - select DMA_NONCOHERENT - -config MIPS_MTX1 - bool "4G Systems MTX-1 board" - depends on SOC_AU1500 - select HW_HAS_PCI - select DMA_NONCOHERENT +config SIBYTE_CRHINE + bool "Support for Sibyte BCM91120C-CRhine" + depends on EXPERIMENTAL + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_BCM1120 + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN -endchoice +config SIBYTE_CRHONE + bool "Support for Sibyte BCM91125C-CRhone" + depends on EXPERIMENTAL + select BOOT_ELF32 + select DMA_COHERENT + select SIBYTE_BCM1125 + select SWAP_IO_SPACE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN config SNI_RM200_PCI bool "Support for SNI RM200 PCI" @@ -849,18 +638,31 @@ config SNI_RM200_PCI select DMA_NONCOHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT + select HW_HAS_EISA select HW_HAS_PCI select I8259 select ISA select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN help The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. +config TOSHIBA_JMR3927 + bool "Support for Toshiba JMR-TX3927 board" + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_TX3927 + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select TOSHIBA_BOARDS + config TOSHIBA_RBTX4927 bool "Support for Toshiba TBTX49[23]7 board" select DMA_NONCOHERENT @@ -871,26 +673,54 @@ config TOSHIBA_RBTX4927 select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select TOSHIBA_BOARDS help This Toshiba board is based on the TX4927 processor. Say Y here to support this machine type -config TOSHIBA_FPCIB0 - bool "FPCIB0 Backplane Support" - depends on TOSHIBA_RBTX4927 +config TOSHIBA_RBTX4938 + bool "Support for Toshiba RBTX4938 board" + select HAVE_STD_PC_SERIAL_PORT + select DMA_NONCOHERENT + select GENERIC_ISA_DMA + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select I8259 + select ISA + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select TOSHIBA_BOARDS + help + This Toshiba board is based on the TX4938 processor. Say Y here to + support this machine type +endchoice + +source "arch/mips/ddb5xxx/Kconfig" +source "arch/mips/gt64120/ev64120/Kconfig" +source "arch/mips/jazz/Kconfig" +source "arch/mips/ite-boards/Kconfig" +source "arch/mips/lasat/Kconfig" +source "arch/mips/momentum/Kconfig" +source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" +source "arch/mips/tx4927/Kconfig" source "arch/mips/tx4938/Kconfig" +source "arch/mips/vr41xx/Kconfig" source "arch/mips/philips/pnx8550/common/Kconfig" +endmenu + config RWSEM_GENERIC_SPINLOCK bool default y config RWSEM_XCHGADD_ALGORITHM bool - select HAS_TXX9_SERIAL config GENERIC_CALIBRATE_DELAY bool @@ -901,8 +731,6 @@ config GENERIC_CALIBRATE_DELAY # config ARC bool - depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 - default y config ARCH_MAY_HAVE_PC_FDC bool @@ -924,20 +752,17 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool +config OWN_DMA + bool + config EARLY_PRINTK bool - depends on MACH_DECSTATION - default y config GENERIC_ISA_DMA bool - depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA - default y config I8259 bool - depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT - default y config LIMITED_DMA bool @@ -946,30 +771,46 @@ config LIMITED_DMA config MIPS_BONITO64 bool - depends on MIPS_ATLAS || MIPS_MALTA - default y config MIPS_MSC bool - depends on MIPS_ATLAS || MIPS_MALTA - default y config MIPS_NILE4 bool - depends on LASAT - default y config MIPS_DISABLE_OBSOLETE_IDE bool -config CPU_LITTLE_ENDIAN - bool "Generate little endian code" - default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA - default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927 +# +# Endianess selection. Suffiently obscure so many users don't know what to +# answer,so we try hard to limit the available choices. Also the use of a +# choice statement should be more obvious to the user. +# +choice + prompt "Endianess selection" help Some MIPS machines can be configured for either little or big endian - byte order. These modes require different kernels. Say Y if your - machine is little endian, N if it's a big endian machine. + byte order. These modes require different kernels and a different + Linux distribution. In general there is one prefered byteorder for a + particular system but some systems are just as commonly used in the + one or the other endianess. + +config CPU_BIG_ENDIAN + bool "Big endian" + depends on SYS_SUPPORTS_BIG_ENDIAN + +config CPU_LITTLE_ENDIAN + bool "Little endian" + depends on SYS_SUPPORTS_LITTLE_ENDIAN + help + +endchoice + +config SYS_SUPPORTS_BIG_ENDIAN + bool + +config SYS_SUPPORTS_LITTLE_ENDIAN + bool config IRQ_CPU bool @@ -977,42 +818,57 @@ config IRQ_CPU config IRQ_CPU_RM7K bool +config IRQ_CPU_RM9K + bool + config IRQ_MV64340 bool config DDB5XXX_COMMON bool - depends on DDB5074 || DDB5476 || DDB5477 - default y config MIPS_BOARDS_GEN bool - depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD - default y config MIPS_GT64111 bool - depends on MIPS_COBALT - default y config MIPS_GT64120 bool - depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT - default y config MIPS_TX3927 bool - depends on TOSHIBA_JMR3927 select HAS_TXX9_SERIAL - default y config PCI_MARVELL bool config ITE_BOARD_GEN bool - depends on MIPS_IVR || MIPS_ITE8172 - default y + +config SOC_AU1000 + bool + select SOC_AU1X00 + +config SOC_AU1100 + bool + select SOC_AU1X00 + +config SOC_AU1500 + bool + select SOC_AU1X00 + +config SOC_AU1550 + bool + select SOC_AU1X00 + +config SOC_AU1200 + bool + select SOC_AU1X00 + +config SOC_AU1X00 + bool + select SYS_SUPPORTS_32BIT_KERNEL config PNX8550 bool @@ -1049,6 +905,9 @@ config SYSCLK_100 endchoice +config ARC32 + bool + config AU1X00_USB_DEVICE bool depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 @@ -1056,11 +915,7 @@ config AU1X00_USB_DEVICE config MIPS_GT96100 bool - depends on MIPS_EV96100 - default y - help - Say Y here to support the Galileo Technology GT96100 communications - controller card. There is a web page at <http://www.galileot.com/>. + select MIPS_GT64120 config IT8172_CIR bool @@ -1074,8 +929,6 @@ config IT8712 config BOOT_ELF32 bool - depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI - default y config MIPS_L1_CACHE_SHIFT int @@ -1083,11 +936,6 @@ config MIPS_L1_CACHE_SHIFT default "7" if SGI_IP27 default "5" -config ARC32 - bool - depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32 - default y - config HAVE_STD_PC_SERIAL_PORT bool @@ -1107,25 +955,12 @@ config ARC_PROMLIB config ARC64 bool - depends on SGI_IP27 - default y config BOOT_ELF64 bool - depends on SGI_IP27 - default y - -#config MAPPED_PCI_IO y -# bool -# depends on SGI_IP27 -# default y config TOSHIBA_BOARDS bool - depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 - default y - -endmenu menu "CPU selection" @@ -1138,7 +973,7 @@ config CPU_MIPS32_R1 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL help - Choose this option to build a kernel for release 2 or later of the + Choose this option to build a kernel for release 1 or later of the MIPS32 architecture. Most modern embedded systems with a 32-bit MIPS processor are based on a MIPS32 processor. If you know the specific type of processor in your system, choose those that one @@ -1153,7 +988,7 @@ config CPU_MIPS32_R2 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL help - Choose this option to build a kernel for release 1 or later of the + Choose this option to build a kernel for release 2 or later of the MIPS32 architecture. Most modern embedded systems with a 32-bit MIPS processor are based on a MIPS32 processor. If you know the specific type of processor in your system, choose those that one @@ -1208,7 +1043,7 @@ config CPU_VR41XX select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help - The options selects support for the NEC VR41xx series of processors. + The options selects support for the NEC VR4100 series of processors. Only choose this option if you have one of these processors as a kernel built with this option will not run on any other type of processor or vice versa. @@ -1242,6 +1077,8 @@ config CPU_R5000 config CPU_R5432 bool "R5432" + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL config CPU_R6000 bool "R6000" @@ -1261,6 +1098,7 @@ config CPU_NEVADA config CPU_R8000 bool "R8000" depends on EXPERIMENTAL + select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL help MIPS Technologies R8000 processors. Note these processors are @@ -1268,6 +1106,7 @@ config CPU_R8000 config CPU_R10000 bool "R10000" + select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1276,12 +1115,14 @@ config CPU_R10000 config CPU_RM7000 bool "RM7000" + select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM config CPU_RM9000 bool "RM9000" + select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1294,6 +1135,64 @@ config CPU_SB1 endchoice +endmenu + +# +# These two indicate any levelof the MIPS32 and MIPS64 architecture +# +config CPU_MIPS32 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 + +config CPU_MIPS64 + bool + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 + +# +# These two indicate the revision of the architecture, either 32 bot 64 bit. +# +config CPU_MIPSR1 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 + +config CPU_MIPSR2 + bool + default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 + +config SYS_SUPPORTS_32BIT_KERNEL + bool +config SYS_SUPPORTS_64BIT_KERNEL + bool +config CPU_SUPPORTS_32BIT_KERNEL + bool +config CPU_SUPPORTS_64BIT_KERNEL + bool + +menu "Kernel type" + +choice + + prompt "Kernel code model" + help + You should only select this option if you have a workload that + actually benefits from 64-bit processing or if your machine has + large memory. You will only be presented a single option in this + menu if your system does not support both 32-bit and 64-bit kernels. + +config 32BIT + bool "32-bit kernel" + depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL + select TRAD_SIGNALS + help + Select this option if you want to build a 32-bit kernel. +config 64BIT + bool "64-bit kernel" + depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + help + Select this option if you want to build a 64-bit kernel. + +endchoice + choice prompt "Kernel page size" default PAGE_SIZE_4KB @@ -1396,8 +1295,9 @@ config MIPS_VPE_LOADER_TOM # this should possibly be in drivers/char, but it is rather cpu related. Hmmm config MIPS_VPE_APSP_API - bool "Enable support for AP/SP API (RTLX)" - depends on MIPS_VPE_LOADER + bool "Enable support for AP/SP API (RTLX)" + depends on MIPS_VPE_LOADER + help config SB1_PASS_1_WORKAROUNDS bool @@ -1580,14 +1480,16 @@ config MIPS_INSANE_LARGE This will result in additional memory usage, so it is not recommended for normal users. +endmenu + config RWSEM_GENERIC_SPINLOCK bool default y -endmenu - menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" +config HW_HAS_EISA + bool config HW_HAS_PCI bool @@ -1621,7 +1523,7 @@ config ISA config EISA bool "EISA support" - depends on SGI_IP22 || SNI_RM200_PCI + depends on HW_HAS_EISA select ISA ---help--- The Extended Industry Standard Architecture (EISA) bus was @@ -1655,12 +1557,6 @@ config MMU bool default y -config MCA - bool - -config SBUS - bool - source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" @@ -1673,7 +1569,6 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool - default y if 32BIT config BUILD_ELF64 bool "Use 64-bit ELF format for building" @@ -1692,7 +1587,7 @@ config BUILD_ELF64 config BINFMT_IRIX bool "Include IRIX binary compatibility" - depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN + depends on CPU_BIG_ENDIAN && 32BIT && BROKEN config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" @@ -1751,7 +1646,7 @@ config SECCOMP config PM bool "Power Management support (EXPERIMENTAL)" - depends on EXPERIMENTAL && MACH_AU1X00 + depends on EXPERIMENTAL && SOC_AU1X00 endmenu @@ -1761,6 +1656,8 @@ source "drivers/Kconfig" source "fs/Kconfig" +source "arch/mips/oprofile/Kconfig" + source "arch/mips/Kconfig.debug" source "security/Kconfig" @@ -1768,7 +1665,3 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" - -config ISA_DMA_API - bool - default y diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig new file mode 100644 index 00000000000..e9b5de49f4c --- /dev/null +++ b/arch/mips/ddb5xxx/Kconfig @@ -0,0 +1,4 @@ +config DDB5477_BUS_FREQUENCY + int "bus frequency (in kHZ, 0 for auto-detect)" + depends on DDB5477 + default 0 diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig new file mode 100644 index 00000000000..d691762cb0f --- /dev/null +++ b/arch/mips/gt64120/ev64120/Kconfig @@ -0,0 +1,3 @@ +config EVB_PCI1 + bool "Enable Second PCI (PCI1)" + depends on MIPS_EV64120 diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig new file mode 100644 index 00000000000..a6d59ad8f84 --- /dev/null +++ b/arch/mips/ite-boards/Kconfig @@ -0,0 +1,8 @@ +config IT8172_REVC + bool "Support for older IT8172 (Rev C)" + depends on MIPS_ITE8172 + help + Say Y here to support the older, Revision C version of the Integrated + Technology Express, Inc. ITE8172 SBC. Vendor page at + <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the + board at <http://www.mvista.com/partners/semiconductor/ite.html>. diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig new file mode 100644 index 00000000000..1f372b0d255 --- /dev/null +++ b/arch/mips/jazz/Kconfig @@ -0,0 +1,33 @@ +config ACER_PICA_61 + bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)" + depends on MACH_JAZZ && EXPERIMENTAL + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + help + This is a machine with a R4400 133/150 MHz CPU. To compile a Linux + kernel that runs on these, say Y here. For details about Linux on + the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at + <http://www.linux-mips.org/>. + +config MIPS_MAGNUM_4000 + bool "Support for MIPS Magnum 4000" + depends on MACH_JAZZ + select DMA_NONCOHERENT + select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL + select SYS_SUPPORTS_LITTLE_ENDIAN + help + This is a machine with a R4000 100 MHz CPU. To compile a Linux + kernel that runs on these, say Y here. For details about Linux on + the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at + <http://www.linux-mips.org/>. + +config OLIVETTI_M700 + bool "Support for Olivetti M700-10" + depends on MACH_JAZZ + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + help + This is a machine with a R4000 100 MHz CPU. To compile a Linux + kernel that runs on these, say Y here. For details about Linux on + the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at + <http://www.linux-mips.org/>. diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig new file mode 100644 index 00000000000..1d2ee8a9be1 --- /dev/null +++ b/arch/mips/lasat/Kconfig @@ -0,0 +1,15 @@ +config PICVUE + tristate "PICVUE LCD display driver" + depends on LASAT + +config PICVUE_PROC + tristate "PICVUE LCD display driver /proc interface" + depends on PICVUE + +config DS1603 + bool "DS1603 RTC driver" + depends on LASAT + +config LASAT_SYSCTL + bool "LASAT sysctl interface" + depends on LASAT diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig new file mode 100644 index 00000000000..70a61cf7174 --- /dev/null +++ b/arch/mips/momentum/Kconfig @@ -0,0 +1,6 @@ +config JAGUAR_DMALOW + bool "Low DMA Mode" + depends on MOMENCO_JAGUAR_ATX + help + Select to Y if jump JP5 is set on your board, N otherwise. Normally + the jumper is set, so if you feel unsafe, just say Y. diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig new file mode 100644 index 00000000000..24d514c9dff --- /dev/null +++ b/arch/mips/pmc-sierra/Kconfig @@ -0,0 +1,3 @@ +config HYPERTRANSPORT + bool "Hypertransport Support for PMC-Sierra Yosemite" + depends on PMC_YOSEMITE diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig new file mode 100644 index 00000000000..5fbbe12e0fc --- /dev/null +++ b/arch/mips/tx4927/Kconfig @@ -0,0 +1,3 @@ +config TOSHIBA_FPCIB0 + bool "FPCIB0 Backplane Support" + depends on TOSHIBA_RBTX4927 diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig new file mode 100644 index 00000000000..a7add16c9aa --- /dev/null +++ b/arch/mips/vr41xx/Kconfig @@ -0,0 +1,88 @@ +config CASIO_E55 + bool "Support for CASIO CASSIOPEIA E-10/15/55/65" + depends on MACH_VR41XX + select DMA_NONCOHERENT + select IRQ_CPU + select ISA + select SYS_SUPPORTS_LITTLE_ENDIAN + +config IBM_WORKPAD + bool "Support for IBM WorkPad z50" + depends on MACH_VR41XX + select DMA_NONCOHERENT + select IRQ_CPU + select ISA + select SYS_SUPPORTS_LITTLE_ENDIAN + +config NEC_CMBVR4133 + bool "Support for NEC CMB-VR4133" + depends on MACH_VR41XX + select CPU_VR41XX + select DMA_NONCOHERENT + select IRQ_CPU + select HW_HAS_PCI + +config ROCKHOPPER + bool "Support for Rockhopper baseboard" + depends on NEC_CMBVR4133 + select I8259 + select HAVE_STD_PC_SERIAL_PORT + +config TANBAC_TB022X + bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM" + depends on MACH_VR41XX + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU + select SYS_SUPPORTS_LITTLE_ENDIAN + help + The TANBAC VR4131 multichip module(TB0225) and + the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms + manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> + about VR4131 multichip module and VR4131DIMM. + +config TANBAC_TB0226 + bool "Support for TANBAC Mbase(TB0226)" + depends on TANBAC_TB022X + select GPIO_VR41XX + help + The TANBAC Mbase(TB0226) is a MIPS-based platform + manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> about Mbase. + +config TANBAC_TB0287 + bool "Support for TANBAC Mini-ITX DIMM base(TB0287)" + depends on TANBAC_TB022X + help + The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform + manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base. + +config VICTOR_MPC30X + bool "Support for Victor MP-C303/304" + depends on MACH_VR41XX + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU + select SYS_SUPPORTS_LITTLE_ENDIAN + +config ZAO_CAPCELLA + bool "Support for ZAO Networks Capcella" + depends on MACH_VR41XX + select DMA_NONCOHERENT + select HW_HAS_PCI + select IRQ_CPU + select SYS_SUPPORTS_LITTLE_ENDIAN + +config PCI_VR41XX + bool "Add PCI control unit support of NEC VR4100 series" + depends on MACH_VR41XX && HW_HAS_PCI + default y + select PCI + +config VRC4173 + tristate "Add NEC VRC4173 companion chip support" + depends on MACH_VR41XX && PCI_VR41XX + help + The NEC VRC4173 is a companion chip for NEC VR4122/VR4131. |