diff options
| -rw-r--r-- | drivers/net/s2io.c | 162 | ||||
| -rw-r--r-- | drivers/net/s2io.h | 8 |
2 files changed, 77 insertions, 93 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 36937cb1fd6..063040bc62d 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -401,9 +401,10 @@ S2IO_PARM_INT(lro, 0); * aggregation happens until we hit max IP pkt size(64K) */ S2IO_PARM_INT(lro_max_pkts, 0xFFFF); -#ifndef CONFIG_S2IO_NAPI S2IO_PARM_INT(indicate_max_pkts, 0); -#endif + +S2IO_PARM_INT(napi, 1); +S2IO_PARM_INT(ufo, 0); static unsigned int tx_fifo_len[MAX_TX_FIFOS] = {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; @@ -2274,9 +2275,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) struct config_param *config; u64 tmp; buffAdd_t *ba; -#ifndef CONFIG_S2IO_NAPI unsigned long flags; -#endif RxD_t *first_rxdp = NULL; mac_control = &nic->mac_control; @@ -2320,12 +2319,15 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", dev->name, rxdp); } -#ifndef CONFIG_S2IO_NAPI - spin_lock_irqsave(&nic->put_lock, flags); - mac_control->rings[ring_no].put_pos = - (block_no * (rxd_count[nic->rxd_mode] + 1)) + off; - spin_unlock_irqrestore(&nic->put_lock, flags); -#endif + if(!napi) { + spin_lock_irqsave(&nic->put_lock, flags); + mac_control->rings[ring_no].put_pos = + (block_no * (rxd_count[nic->rxd_mode] + 1)) + off; + spin_unlock_irqrestore(&nic->put_lock, flags); + } else { + mac_control->rings[ring_no].put_pos = + (block_no * (rxd_count[nic->rxd_mode] + 1)) + off; + } if ((rxdp->Control_1 & RXD_OWN_XENA) && ((nic->rxd_mode >= RXD_MODE_3A) && (rxdp->Control_2 & BIT(0)))) { @@ -2568,7 +2570,6 @@ static void free_rx_buffers(struct s2io_nic *sp) * 0 on success and 1 if there are No Rx packets to be processed. */ -#if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget) { nic_t *nic = dev->priv; @@ -2633,7 +2634,6 @@ no_rx: atomic_dec(&nic->isr_cnt); return 1; } -#endif #ifdef CONFIG_NET_POLL_CONTROLLER /** @@ -2707,9 +2707,7 @@ static void rx_intr_handler(ring_info_t *ring_data) rx_curr_get_info_t get_info, put_info; RxD_t *rxdp; struct sk_buff *skb; -#ifndef CONFIG_S2IO_NAPI int pkt_cnt = 0; -#endif int i; spin_lock(&nic->rx_lock); @@ -2725,16 +2723,18 @@ static void rx_intr_handler(ring_info_t *ring_data) put_info = ring_data->rx_curr_put_info; put_block = put_info.block_index; rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr; -#ifndef CONFIG_S2IO_NAPI - spin_lock(&nic->put_lock); - put_offset = ring_data->put_pos; - spin_unlock(&nic->put_lock); -#else - put_offset = (put_block * (rxd_count[nic->rxd_mode] + 1)) + - put_info.offset; -#endif + if (!napi) { + spin_lock(&nic->put_lock); + put_offset = ring_data->put_pos; + spin_unlock(&nic->put_lock); + } else + put_offset = ring_data->put_pos; + while (RXD_IS_UP2DT(rxdp)) { - /* If your are next to put index then it's FIFO full condition */ + /* + * If your are next to put index then it's + * FIFO full condition + */ if ((get_block == put_block) && (get_info.offset + 1) == put_info.offset) { DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name); @@ -2792,15 +2792,12 @@ static void rx_intr_handler(ring_info_t *ring_data) rxdp = ring_data->rx_blocks[get_block].block_virt_addr; } -#ifdef CONFIG_S2IO_NAPI nic->pkts_to_process -= 1; - if (!nic->pkts_to_process) + if ((napi) && (!nic->pkts_to_process)) break; -#else pkt_cnt++; if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts)) break; -#endif } if (nic->lro) { /* Clear all LRO sessions before exiting */ @@ -4193,26 +4190,26 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) org_mask = readq(&bar0->general_int_mask); writeq(val64, &bar0->general_int_mask); -#ifdef CONFIG_S2IO_NAPI - if (reason & GEN_INTR_RXTRAFFIC) { - if (netif_rx_schedule_prep(dev)) { - writeq(val64, &bar0->rx_traffic_mask); - __netif_rx_schedule(dev); + if (napi) { + if (reason & GEN_INTR_RXTRAFFIC) { + if (netif_rx_schedule_prep(dev)) { + writeq(val64, &bar0->rx_traffic_mask); + __netif_rx_schedule(dev); + } + } + } else { + /* + * Rx handler is called by default, without checking for the + * cause of interrupt. + * rx_traffic_int reg is an R1 register, writing all 1's + * will ensure that the actual interrupt causing bit get's + * cleared and hence a read can be avoided. + */ + writeq(val64, &bar0->rx_traffic_int); + for (i = 0; i < config->rx_ring_num; i++) { + rx_intr_handler(&mac_control->rings[i]); } } -#else - /* - * Rx handler is called by default, without checking for the - * cause of interrupt. - * rx_traffic_int reg is an R1 register, writing all 1's - * will ensure that the actual interrupt causing bit get's - * cleared and hence a read can be avoided. - */ - writeq(val64, &bar0->rx_traffic_int); - for (i = 0; i < config->rx_ring_num; i++) { - rx_intr_handler(&mac_control->rings[i]); - } -#endif /* * tx_traffic_int reg is an R1 register, writing all 1's @@ -4231,11 +4228,14 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) * reallocate the buffers from the interrupt handler itself, * else schedule a tasklet to reallocate the buffers. */ -#ifndef CONFIG_S2IO_NAPI - for (i = 0; i < config->rx_ring_num; i++) - s2io_chk_rx_buffers(sp, i); -#endif - writeq(org_mask, &bar0->general_int_mask); + if (!napi) { + for (i = 0; i < config->rx_ring_num; i++) + s2io_chk_rx_buffers(sp, i); + } + + writeq(0, &bar0->general_int_mask); + readl(&bar0->general_int_status); + atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } @@ -6578,23 +6578,20 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) if (!sp->lro) { skb->protocol = eth_type_trans(skb, dev); -#ifdef CONFIG_S2IO_NAPI if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { /* Queueing the vlan frame to the upper layer */ - vlan_hwaccel_receive_skb(skb, sp->vlgrp, - RXD_GET_VLAN_TAG(rxdp->Control_2)); - } else { - netif_receive_skb(skb); - } -#else - if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { - /* Queueing the vlan frame to the upper layer */ - vlan_hwaccel_rx(skb, sp->vlgrp, - RXD_GET_VLAN_TAG(rxdp->Control_2)); + if (napi) + vlan_hwaccel_receive_skb(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); + else + vlan_hwaccel_rx(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); } else { - netif_rx(skb); + if (napi) + netif_receive_skb(skb); + else + netif_rx(skb); } -#endif } else { send_up: queue_rx_frame(skb); @@ -6695,13 +6692,9 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type) DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n"); rx_ring_num = 8; } -#ifdef CONFIG_S2IO_NAPI - if (*dev_intr_type != INTA) { - DBG_PRINT(ERR_DBG, "s2io: NAPI cannot be enabled when " - "MSI/MSI-X is enabled. Defaulting to INTA\n"); - *dev_intr_type = INTA; - } -#endif + if (*dev_intr_type != INTA) + napi = 0; + #ifndef CONFIG_PCI_MSI if (*dev_intr_type != INTA) { DBG_PRINT(ERR_DBG, "s2io: This kernel does not support" @@ -6962,10 +6955,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) * will use eth_mac_addr() for dev->set_mac_address * mac address will be set every time dev->open() is called */ -#if defined(CONFIG_S2IO_NAPI) dev->poll = s2io_poll; dev->weight = 32; -#endif #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = s2io_netpoll; @@ -6976,7 +6967,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_TSO; dev->features |= NETIF_F_TSO6; - if (sp->device_type & XFRAME_II_DEVICE) { + if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) { dev->features |= NETIF_F_UFO; dev->features |= NETIF_F_HW_CSUM; } @@ -7057,9 +7048,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* Initialize spinlocks */ spin_lock_init(&sp->tx_lock); -#ifndef CONFIG_S2IO_NAPI - spin_lock_init(&sp->put_lock); -#endif + + if (!napi) + spin_lock_init(&sp->put_lock); spin_lock_init(&sp->rx_lock); /* @@ -7120,9 +7111,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->name); break; } -#ifdef CONFIG_S2IO_NAPI - DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); -#endif + + if (napi) + DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); switch(sp->intr_type) { case INTA: DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); @@ -7137,7 +7128,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (sp->lro) DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", dev->name); - + if (ufo) + DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)" + " enabled\n", dev->name); /* Initialize device name */ sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name); @@ -7539,11 +7532,10 @@ static void queue_rx_frame(struct sk_buff *skb) struct net_device *dev = skb->dev; skb->protocol = eth_type_trans(skb, dev); -#ifdef CONFIG_S2IO_NAPI - netif_receive_skb(skb); -#else - netif_rx(skb); -#endif + if (napi) + netif_receive_skb(skb); + else + netif_rx(skb); } static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 3b0bafd273c..577fa3ad214 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -616,10 +616,8 @@ typedef struct ring_info { */ rx_curr_get_info_t rx_curr_get_info; -#ifndef CONFIG_S2IO_NAPI /* Index to the absolute position of the put pointer of Rx ring */ int put_pos; -#endif /* Buffer Address store. */ buffAdd_t **ba; @@ -738,13 +736,11 @@ typedef struct lro { /* Structure representing one instance of the NIC */ struct s2io_nic { int rxd_mode; -#ifdef CONFIG_S2IO_NAPI /* * Count of packets to be processed in a given iteration, it will be indicated * by the quota field of the device structure when NAPI is enabled. */ int pkts_to_process; -#endif struct net_device *dev; mac_info_t mac_control; struct config_param config; @@ -775,9 +771,7 @@ struct s2io_nic { atomic_t rx_bufs_left[MAX_RX_RINGS]; spinlock_t tx_lock; -#ifndef CONFIG_S2IO_NAPI spinlock_t put_lock; -#endif #define PROMISC 1 #define ALL_MULTI 2 @@ -985,9 +979,7 @@ static void s2io_tasklet(unsigned long dev_addr); static void s2io_set_multicast(struct net_device *dev); static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp); static void s2io_link(nic_t * sp, int link); -#if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget); -#endif static void s2io_init_pci(nic_t * sp); static int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static void s2io_alarm_handle(unsigned long data); |