summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/power/devices.txt34
-rw-r--r--arch/alpha/include/asm/suspend.h6
-rw-r--r--arch/arm/include/asm/suspend.h4
-rw-r--r--arch/ia64/include/asm/suspend.h1
-rw-r--r--arch/m68k/include/asm/suspend.h6
-rw-r--r--arch/mips/include/asm/suspend.h6
-rw-r--r--arch/s390/include/asm/suspend.h5
-rw-r--r--arch/um/include/asm/suspend.h4
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--arch/x86/kernel/apm_32.c14
-rw-r--r--arch/x86/power/Makefile2
-rw-r--r--arch/x86/power/cpu.c (renamed from arch/x86/power/cpu_64.c)165
-rw-r--r--arch/x86/power/cpu_32.c148
-rw-r--r--drivers/base/platform.c36
-rw-r--r--drivers/base/power/main.c94
-rw-r--r--drivers/base/sys.c16
-rw-r--r--drivers/xen/manage.c16
-rw-r--r--include/linux/device.h5
-rw-r--r--include/linux/interrupt.h6
-rw-r--r--include/linux/pm.h11
-rw-r--r--include/linux/suspend.h18
-rw-r--r--kernel/kexec.c14
-rw-r--r--kernel/power/Kconfig4
-rw-r--r--kernel/power/Makefile5
-rw-r--r--kernel/power/hibernate.c (renamed from kernel/power/disk.c)34
-rw-r--r--kernel/power/hibernate_nvs.c135
-rw-r--r--kernel/power/main.c521
-rw-r--r--kernel/power/power.h25
-rw-r--r--kernel/power/snapshot.c80
-rw-r--r--kernel/power/suspend.c300
-rw-r--r--kernel/power/suspend_test.c187
-rw-r--r--kernel/power/swsusp.c198
-rw-r--r--mm/vmscan.c4
33 files changed, 984 insertions, 1122 deletions
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 421e7d00ffd..c9abbd86bc1 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices:
struct bus_type {
...
int (*suspend)(struct device *dev, pm_message_t state);
- int (*suspend_late)(struct device *dev, pm_message_t state);
-
- int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
};
@@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order:
This call should handle parts of device suspend logic that require
sleeping. It probably does work to quiesce the device which hasn't
- been abstracted into class.suspend() or bus.suspend_late().
-
- 3 bus.suspend_late(dev, message) is called with IRQs disabled, and
- with only one CPU active. Until the bus.resume_early() phase
- completes (see later), IRQs are not enabled again. This method
- won't be exposed by all busses; for message based busses like USB,
- I2C, or SPI, device interactions normally require IRQs. This bus
- call may be morphed into a driver call with bus-specific parameters.
-
- This call might save low level hardware state that might otherwise
- be lost in the upcoming low power state, and actually put the
- device into a low power state ... so that in some cases the device
- may stay partly usable until this late. This "late" call may also
- help when coping with hardware that behaves badly.
+ been abstracted into class.suspend().
The pm_message_t parameter is currently used to refine those semantics
(described later).
@@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins.
The phases are seen by driver notifications issued in this order:
- 1 bus.resume_early(dev) is called with IRQs disabled, and with
- only one CPU active. As with bus.suspend_late(), this method
- won't be supported on busses that require IRQs in order to
- interact with devices.
-
- This reverses the effects of bus.suspend_late().
-
- 2 bus.resume(dev) is called next. This may be morphed into a device
- driver call with bus-specific parameters; implementations may sleep.
-
- This reverses the effects of bus.suspend().
+ 1 bus.resume(dev) reverses the effects of bus.suspend(). This may
+ be morphed into a device driver call with bus-specific parameters;
+ implementations may sleep.
- 3 class.resume(dev) is called for devices associated with a class
+ 2 class.resume(dev) is called for devices associated with a class
that has such a method. Implementations may sleep.
This reverses the effects of class.suspend(), and would usually
diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h
deleted file mode 100644
index c7042d57585..00000000000
--- a/arch/alpha/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ALPHA_SUSPEND_H
-#define __ALPHA_SUSPEND_H
-
-/* Dummy include. */
-
-#endif /* __ALPHA_SUSPEND_H */
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
deleted file mode 100644
index cf0d0bdee74..00000000000
--- a/arch/arm/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif
diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h
deleted file mode 100644
index b05bbb6074e..00000000000
--- a/arch/ia64/include/asm/suspend.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/arch/m68k/include/asm/suspend.h b/arch/m68k/include/asm/suspend.h
deleted file mode 100644
index 57b3ddb4d26..00000000000
--- a/arch/m68k/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SUSPEND_H
-#define _M68K_SUSPEND_H
-
-/* Dummy include. */
-
-#endif /* _M68K_SUSPEND_H */
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
deleted file mode 100644
index 2562f8f9be0..00000000000
--- a/arch/mips/include/asm/suspend.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SUSPEND_H
-#define __ASM_SUSPEND_H
-
-/* Somewhen... Maybe :-) */
-
-#endif /* __ASM_SUSPEND_H */
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
deleted file mode 100644
index 1f34580e67a..00000000000
--- a/arch/s390/include/asm/suspend.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_S390_SUSPEND_H
-#define __ASM_S390_SUSPEND_H
-
-#endif
-
diff --git a/arch/um/include/asm/suspend.h b/arch/um/include/asm/suspend.h
deleted file mode 100644
index f4e8e007f46..00000000000
--- a/arch/um/include/asm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __UM_SUSPEND_H
-#define __UM_SUSPEND_H
-
-#endif
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 7c243a2c511..ca93638ba43 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -104,7 +104,7 @@ int acpi_save_state_mem(void)
initial_gs = per_cpu_offset(smp_processor_id());
#endif
initial_code = (unsigned long)wakeup_long64;
- saved_magic = 0x123456789abcdef0;
+ saved_magic = 0x123456789abcdef0L;
#endif /* CONFIG_64BIT */
return 0;
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 49e0939bac4..79302e9a33a 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1233,9 +1233,9 @@ static int suspend(int vetoable)
int err;
struct apm_user *as;
- device_suspend(PMSG_SUSPEND);
+ dpm_suspend_start(PMSG_SUSPEND);
- device_power_down(PMSG_SUSPEND);
+ dpm_suspend_noirq(PMSG_SUSPEND);
local_irq_disable();
sysdev_suspend(PMSG_SUSPEND);
@@ -1259,9 +1259,9 @@ static int suspend(int vetoable)
sysdev_resume();
local_irq_enable();
- device_power_up(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
- device_resume(PMSG_RESUME);
+ dpm_resume_end(PMSG_RESUME);
queue_event(APM_NORMAL_RESUME, NULL);
spin_lock(&user_list_lock);
for (as = user_list; as != NULL; as = as->next) {
@@ -1277,7 +1277,7 @@ static void standby(void)
{
int err;
- device_power_down(PMSG_SUSPEND);
+ dpm_suspend_noirq(PMSG_SUSPEND);
local_irq_disable();
sysdev_suspend(PMSG_SUSPEND);
@@ -1291,7 +1291,7 @@ static void standby(void)
sysdev_resume();
local_irq_enable();
- device_power_up(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
}
static apm_event_t get_event(void)
@@ -1376,7 +1376,7 @@ static void check_events(void)
ignore_bounce = 1;
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
- device_resume(PMSG_RESUME);
+ dpm_resume_end(PMSG_RESUME);
queue_event(event, NULL);
}
ignore_normal_resume = 0;
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index 58b32db3312..de2abbd0754 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -3,5 +3,5 @@
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_cpu_$(BITS).o := $(nostackp)
-obj-$(CONFIG_PM_SLEEP) += cpu_$(BITS).o
+obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu_64.c b/arch/x86/power/cpu.c
index 5343540f260..d277ef1eea5 100644
--- a/arch/x86/power/cpu_64.c
+++ b/arch/x86/power/cpu.c
@@ -1,5 +1,5 @@
/*
- * Suspend and hibernation support for x86-64
+ * Suspend support specific for i386/x86-64.
*
* Distribute under GPLv2
*
@@ -8,18 +8,28 @@
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
-#include <linux/smp.h>
#include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
+#include <linux/smp.h>
+
#include <asm/pgtable.h>
+#include <asm/proto.h>
#include <asm/mtrr.h>
+#include <asm/page.h>
+#include <asm/mce.h>
#include <asm/xcr.h>
#include <asm/suspend.h>
-static void fix_processor_context(void);
+#ifdef CONFIG_X86_32
+static struct saved_context saved_context;
+unsigned long saved_context_ebx;
+unsigned long saved_context_esp, saved_context_ebp;
+unsigned long saved_context_esi, saved_context_edi;
+unsigned long saved_context_eflags;
+#else
+/* CONFIG_X86_64 */
struct saved_context saved_context;
+#endif
/**
* __save_processor_state - save CPU registers before creating a
@@ -38,19 +48,35 @@ struct saved_context saved_context;
*/
static void __save_processor_state(struct saved_context *ctxt)
{
+#ifdef CONFIG_X86_32
+ mtrr_save_fixed_ranges(NULL);
+#endif
kernel_fpu_begin();
/*
* descriptor tables
*/
+#ifdef CONFIG_X86_32
+ store_gdt(&ctxt->gdt);
+ store_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
store_idt((struct desc_ptr *)&ctxt->idt_limit);
+#endif
store_tr(ctxt->tr);
/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
/*
* segment registers
*/
+#ifdef CONFIG_X86_32
+ savesegment(es, ctxt->es);
+ savesegment(fs, ctxt->fs);
+ savesegment(gs, ctxt->gs);
+ savesegment(ss, ctxt->ss);
+#else
+/* CONFIG_X86_64 */
asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
@@ -62,30 +88,87 @@ static void __save_processor_state(struct saved_context *ctxt)
rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
mtrr_save_fixed_ranges(NULL);
+ rdmsrl(MSR_EFER, ctxt->efer);
+#endif
+
/*
* control registers
*/
- rdmsrl(MSR_EFER, ctxt->efer);
ctxt->cr0 = read_cr0();
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
+#ifdef CONFIG_X86_32
+ ctxt->cr4 = read_cr4_safe();
+#else
+/* CONFIG_X86_64 */
ctxt->cr4 = read_cr4();
ctxt->cr8 = read_cr8();
+#endif
}
+/* Needed by apm.c */
void save_processor_state(void)
{
__save_processor_state(&saved_context);
}
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(save_processor_state);
+#endif
static void do_fpu_end(void)
{
/*
- * Restore FPU regs if necessary
+ * Restore FPU regs if necessary.
*/
kernel_fpu_end();
}
+static void fix_processor_context(void)
+{
+ int cpu = smp_processor_id();
+ struct tss_struct *t = &per_cpu(init_tss, cpu);
+
+ set_tss_desc(cpu, t); /*
+ * This just modifies memory; should not be
+ * necessary. But... This is necessary, because
+ * 386 hardware has concept of busy TSS or some
+ * similar stupidity.
+ */
+
+#ifdef CONFIG_X86_64
+ get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
+
+ syscall_init(); /* This sets MSR_*STAR and related */
+#endif
+ load_TR_desc(); /* This does ltr */
+ load_LDT(&current->active_mm->context); /* This does lldt */
+
+ /*
+ * Now maybe reload the debug registers
+ */
+ if (current->thread.debugreg7) {
+#ifdef CONFIG_X86_32
+ set_debugreg(current->thread.debugreg0, 0);
+ set_debugreg(current->thread.debugreg1, 1);
+ set_debugreg(current->thread.debugreg2, 2);
+ set_debugreg(current->thread.debugreg3, 3);
+ /* no 4 and 5 */
+ set_debugreg(current->thread.debugreg6, 6);
+ set_debugreg(current->thread.debugreg7, 7);
+#else
+ /* CONFIG_X86_64 */
+ loaddebug(&current->thread, 0);
+ loaddebug(&current->thread, 1);
+ loaddebug(&current->thread, 2);
+ loaddebug(&current->thread, 3);
+ /* no 4 and 5 */
+ loaddebug(&current->thread, 6);
+ loaddebug(&current->thread, 7);
+#endif
+ }
+
+}
+
/**
* __restore_processor_state - restore the contents of CPU registers saved
* by __save_processor_state()
@@ -96,9 +179,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
/*
* control registers
*/
+ /* cr4 was introduced in the Pentium CPU */
+#ifdef CONFIG_X86_32
+ if (ctxt->cr4)
+ write_cr4(ctxt->cr4);
+#else
+/* CONFIG X86_64 */
wrmsrl(MSR_EFER, ctxt->efer);
write_cr8(ctxt->cr8);
write_cr4(ctxt->cr4);
+#endif
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
@@ -107,13 +197,31 @@ static void __restore_processor_state(struct saved_context *ctxt)
* now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context().
*/
+#ifdef CONFIG_X86_32
+ load_gdt(&ctxt->gdt);
+ load_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-
+#endif
/*
* segment registers
*/
+#ifdef CONFIG_X86_32
+ loadsegment(es, ctxt->es);
+ loadsegment(fs, ctxt->fs);
+ loadsegment(gs, ctxt->gs);
+ loadsegment(ss, ctxt->ss);
+
+ /*
+ * sysenter MSRs
+ */
+ if (boot_cpu_has(X86_FEATURE_SEP))
+ enable_sep_cpu();
+#else
+/* CONFIG_X86_64 */
asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
@@ -123,6 +231,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
wrmsrl(MSR_FS_BASE, ctxt->fs_base);
wrmsrl(MSR_GS_BASE, ctxt->gs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+#endif
/*
* restore XCR0 for xsave capable cpu's.
@@ -134,41 +243,17 @@ static void __restore_processor_state(struct saved_context *ctxt)
do_fpu_end();
mtrr_ap_init();
+
+#ifdef CONFIG_X86_32
+ mcheck_init(&boot_cpu_data);
+#endif
}
+/* Needed by apm.c */
void restore_processor_state(void)
{
__restore_processor_state(&saved_context);
}
-
-static void fix_processor_context(void)
-{
- int cpu = smp_processor_id();
- struct tss_struct *t = &per_cpu(init_tss, cpu);
-
- /*
- * This just modifies memory; should not be necessary. But... This
- * is necessary, because 386 hardware has concept of busy TSS or some
- * similar stupidity.
- */
- set_tss_desc(cpu, t);
-
- get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
-
- syscall_init(); /* This sets MSR_*STAR and related */
- load_TR_desc(); /* This does ltr */
- load_LDT(&current->active_mm->context); /* This does lldt */
-
- /*
- * Now maybe reload the debug registers
- */
- if (current->thread.debugreg7){
- loaddebug(&current->thread, 0);
- loaddebug(&current->thread, 1);
- loaddebug(&current->thread, 2);
- loaddebug(&current->thread, 3);
- /* no 4 and 5 */
- loaddebug(&current->thread, 6);
- loaddebug(&current->thread, 7);
- }
-}
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(restore_processor_state);
+#endif
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
deleted file mode 100644
index ce702c5b3a2..00000000000
--- a/arch/x86/power/cpu_32.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/xcr.h>
-#include <asm/suspend.h>
-
-static struct saved_context saved_context;
-
-unsigned long saved_context_ebx;
-unsigned long saved_context_esp, saved_context_ebp;
-unsigned long saved_context_esi, saved_context_edi;
-unsigned long saved_context_eflags;
-
-static void __save_processor_state(struct saved_context *ctxt)
-{
- mtrr_save_fixed_ranges(NULL);
- kernel_fpu_begin();
-
- /*
- * descriptor tables
- */
- store_gdt(&ctxt->gdt);
- store_idt(&ctxt->idt);
- store_tr(ctxt->tr);
-
- /*
- * segment registers
- */
- savesegment(es, ctxt->es);
- savesegment(fs, ctxt->fs);
- savesegment(gs, ctxt->gs);
- savesegment(ss, ctxt->ss);
-
- /*
- * control registers
- */
- ctxt->cr0 = read_cr0();
- ctxt->cr2 = read_cr2();
- ctxt->cr3 = read_cr3();
- ctxt->cr4 = read_cr4_safe();
-}
-
-/* Needed by apm.c */
-void save_processor_state(void)
-{
- __save_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(save_processor_state);
-
-static void do_fpu_end(void)
-{
- /*
- * Restore FPU regs if necessary.
- */
- kernel_fpu_end();
-}
-
-static void fix_processor_context(void)
-{
- int cpu = smp_processor_id();
- struct tss_struct *t = &per_cpu(init_tss, cpu);
-
- set_tss_desc(cpu, t); /*
- * This just modifies memory; should not be
- * necessary. But... This is necessary, because
- * 386 hardware has concept of busy TSS or some
- * similar stupidity.
- */
-
- load_TR_desc(); /* This does ltr */
- load_LDT(&current->active_mm->context); /* This does lldt */
-
- /*
- * Now maybe reload the debug registers
- */
- if (current->thread.debugreg7) {
- set_debugreg(current->thread.debugreg0, 0);
- set_debugreg(current->thread.debugreg1, 1);
- set_debugreg(current->thread.debugreg2, 2);
- set_debugreg(current->thread.debugreg3, 3);
- /* no 4 and 5 */
- set_debugreg(current->thread.debugreg6, 6);
- set_debugreg(current->thread.debugreg7, 7);
- }
-
-}
-
-static void __restore_processor_state(struct saved_context *ctxt)
-{
- /*
- * control registers
- */
- /* cr4 was introduced in the Pentium CPU */
- if (ctxt->cr4)
- write_cr4(ctxt->cr4);
- write_cr3(ctxt->cr3);
- write_cr2(ctxt->cr2);
- write_cr0(ctxt->cr0);
-
- /*
- * now restore the descriptor tables to their proper values
- * ltr is done i fix_processor_context().
- */
- load_gdt(&ctxt->gdt);
- load_idt(&ctxt->idt);
-
- /*
- * segment registers
- */
- loadsegment(es, ctxt->es);
- loadsegment(fs, ctxt->fs);
- loadsegment(gs, ctxt->gs);
- loadsegment(ss, ctxt->ss);
-
- /*
- * sysenter MSRs
- */
- if (boot_cpu_has(X86_FEATURE_SEP))
- enable_sep_cpu();
-
- /*
- * restore XCR0 for xsave capable cpu's.
- */
- if (cpu_has_xsave)
- xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
-
- fix_processor_context();
- do_fpu_end();
- mtrr_ap_init();
- mcheck_init(&boot_cpu_data);
-}
-
-/* Needed by apm.c */
-void restore_processor_state(void)
-{
- __restore_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(restore_processor_state);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 8b4708e0624..ead3f64c41d 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -469,22 +469,6 @@ static void platform_drv_shutdown(struct device *_dev)
drv->shutdown(dev);
}
-static int platform_drv_suspend(struct device *_dev, pm_message_t state)
-{
- struct platform_driver *drv = to_platform_driver(_dev->driver);
- struct platform_device *dev = to_platform_device(_dev);
-
- return drv->suspend(dev, state);
-}
-
-static int platform_drv_resume(struct device *_dev)
-{
- struct platform_driver *drv = to_platform_driver(_dev->driver);
- struct platform_device *dev = to_platform_device(_dev);
-
- return drv->resume(dev);
-}
-
/**
* platform_driver_register
* @drv: platform driver structure
@@ -498,10 +482,10 @@ int platform_driver_register(struct platform_driver *drv)
drv->driver.remove = platform_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = platform_drv_shutdown;
- if (drv->suspend)
- drv->driver.suspend = platform_drv_suspend;
- if (drv->resume)
- drv->driver.resume = platform_drv_resume;
+ if (drv->suspend || drv->resume)
+ pr_warning("Platform driver '%s' needs updating - please use "
+ "dev_pm_ops\n", drv->driver.name);
+
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -633,10 +617,12 @@ static int platform_match(struct device *dev, struct device_driver *drv)
static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
+ struct platform_driver *pdrv = to_platform_driver(dev->driver);
+ struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
- if (dev->driver && dev->driver->suspend)
- ret = dev->driver->suspend(dev, mesg);
+ if (dev->driver && pdrv->suspend)
+ ret = pdrv->suspend(pdev, mesg);
return ret;
}
@@ -667,10 +653,12 @@ static int platform_legacy_resume_early(struct device *dev)
static int platform_legacy_resume(struct device *dev)
{
+ struct platform_driver *pdrv = to_platform_driver(dev->driver);
+ struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
- if (dev->driver && dev->driver->resume)
- ret = dev->driver->resume(dev);
+ if (dev->driver && pdrv->resume)
+ ret = pdrv->resume(pdev);
return ret;
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3e4bc699bc0..fae72545898 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
/*------------------------- Resume routines -------------------------*/
/**
- * resume_device_noirq - Power on one device (early resume).
+ * device_resume_noirq - Power on one device (early resume).
* @dev: Device.
* @state: PM transition of the system being carried out.
*
* Must be called with interrupts disabled.
*/
-static int resume_device_noirq(struct device *dev, pm_message_t state)
+static int device_resume_noirq(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
if (dev->bus->pm) {
pm_dev_dbg(dev, state, "EARLY ");
error = pm_noirq_op(dev, dev->bus->pm, state);
- } else if (dev->bus->resume_early) {
- pm_dev_dbg(dev, state, "legacy EARLY ");
- error = dev->bus->resume_early(dev);
}
End:
TRACE_RESUME(error);
@@ -344,16 +341,16 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
}
/**
- * dpm_power_up - Power on all regular (non-sysdev) devices.
+ * dpm_resume_noirq - Power on all regular (non-sysdev) devices.
* @state: PM transition of the system being carried out.
*
- * Execute the appropriate "noirq resume" callback for all devices marked
- * as DPM_OFF_IRQ.
+ * Call the "noirq" resume handlers for all devices marked as
+ * DPM_OFF_IRQ and enable device drivers to receive interrupts.
*
* Must be called under dpm_list_mtx. Device drivers should not receive
* interrupts while it's being executed.
*/
-static void dpm_power_up(pm_message_t state)
+void dpm_resume_noirq(pm_message_t state)
{
struct device *dev;
@@ -363,33 +360,21 @@ static void dpm_power_up(pm_message_t state)
int error;
dev->power.status = DPM_OFF;
- error = resume_device_noirq(dev, state);
+ error = device_resume_noirq(dev, state);
if (error)
pm_dev_err(dev, state, " early", error);
}
mutex_unlock(&dpm_list_mtx);
-}
-
-/**
- * device_power_up - Turn on all devices that need special attention.
- * @state: PM transition of the system being carried out.
- *
- * Call the "early" resume handlers and enable device drivers to receive
- * interrupts.
- */
-void device_power_up(pm_message_t state)
-{
- dpm_power_up(state);
resume_device_irqs();
}
-EXPORT_SYMBOL_GPL(device_power_up);
+EXPORT_SYMBOL_GPL(dpm_resume_noirq);
/**
- * resume_device - Restore state for one device.
+ * device_resume - Restore state for one device.
* @dev: Device.
* @state: PM transition of the system being carried out.
*/
-static int resume_device(struct device *dev, pm_message_t state)
+static int device_resume(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -414,9 +399,6 @@ static int resume_device(struct device *dev, pm_message_t state)
if (dev->type->pm) {
pm_dev_dbg(dev, state, "type ");
error = pm_op(dev, dev->type->pm, state);
- } else if (dev->type->resume) {
- pm_dev_dbg(dev, state, "legacy type ");
- error = dev->type->resume(dev);
}
if (error)
goto End;
@@ -462,7 +444,7 @@ static void dpm_resume(pm_message_t state)
dev->power.status = DPM_RESUMING;
mutex_unlock(&dpm_list_mtx);
- error = resume_device(dev, state);
+ error = device_resume(dev, state);
mutex_lock(&dpm_list_mtx);
if (error)
@@ -480,11 +462,11 @@ static void dpm_resume(pm_message_t state)
}
/**
- * complete_device - Complete a PM transition for given device
+ * device_complete - Complete a PM transition for given device
* @dev: Device.
* @state: PM transition of the system being carried out.
*/
-static void complete_device(struct device *dev, pm_message_t state)
+static void device_complete(struct device *dev, pm_message_t state)
{
down(&dev->sem);
@@ -527,7 +509,7 @@ static void dpm_complete(pm_message_t state)
dev->power.status = DPM_ON;
mutex_unlock(&dpm_list_mtx);
- complete_device(dev, state);
+ device_complete(dev, state);
mutex_lock(&dpm_list_mtx);
}
@@ -540,19 +522,19 @@ static void dpm_complete(pm_message_t state)
}
/**
- * device_resume - Restore state of each device in system.
+ * dpm_resume_end - Restore state of each device in system.
* @state: PM transition of the system being carried out.
*
* Resume all the devices, unlock them all, and allow new
* devices to be registered once again.
*/
-void device_resume(pm_message_t state)
+void dpm_resume_end(pm_message_t state)
{
might_sleep();
dpm_resume(state);
dpm_complete(state);
}
-EXPORT_SYMBOL_GPL(device_resume);
+EXPORT_SYMBOL_GPL(dpm_resume_end);
/*------------------------- Suspend routines -------------------------*/
@@ -577,13 +559,13 @@ static pm_message_t resume_event(pm_message_t sleep_state)
}
/**
- * suspend_device_noirq - Shut down one device (late suspend).
+ * device_suspend_noirq - Shut down one device (late suspend).
* @dev: Device.
* @state: PM transition of the system being carried out.
*
* This is called with interrupts off and only a single CPU running.
*/
-static int suspend_device_noirq(struct device *dev, pm_message_t state)
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -593,24 +575,20 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state)
if (dev->bus->pm) {
pm_dev_dbg(dev, state, "LATE ");
error = pm_noirq_op(dev, dev->bus->pm, state);
- } else if (dev->bus->suspend_late) {
- pm_dev_dbg(dev, state, "legacy LATE ");
- error = dev->bus->suspend_late(dev, state);
- suspend_report_result(dev->bus->suspend_late, error);
}
return error;
}
/**
- * device_power_down - Shut down special devices.
+ * dpm_suspend_noirq - Power down all regular (non-sysdev) devices.
* @state: PM transition of the system being carried out.
*
- * Prevent device drivers from receiving interrupts and call the "late"
+ * Prevent device drivers from receiving interrupts and call the "noirq"
* suspend handlers.
*
* Must be called under dpm_list_mtx.
*/
-int device_power_down(pm_message_t state)
+int dpm_suspend_noirq(pm_message_t state)
{
struct device *dev;
int error = 0;
@@ -618,7 +596,7 @@ int device_power_down(pm_message_t state)
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
- error = suspend_device_noirq(dev, state);
+ error = device_suspend_noirq(dev, state);
if (error) {
pm_dev_err(dev, state, " late", error);
break;
@@ -627,17 +605,17 @@ int device_power_down(pm_message_t state)
}
mutex_unlock(&dpm_list_mtx);
if (error)
- device_power_up(resume_event(state));
+ dpm_resume_noirq(resume_event(state));
return error;
}
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
/**
- * suspend_device - Save state of one device.
+ * device_suspend - Save state of one device.
* @dev: Device.
* @state: PM transition of the system being carried out.
*/
-static int suspend_device(struct device *dev, pm_message_t state)
+static int device_suspend(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -660,10 +638,6 @@ static int suspend_device(struct device *dev, pm_message_t state)
if (dev->type->pm) {
pm_dev_dbg(dev, state, "type ");
error = pm_op(dev, dev->type->pm, state);
- } else if (dev->type->suspend) {
- pm_dev_dbg(dev, state, "legacy type ");
- error = dev->type->suspend(dev, state);
- suspend_report_result(dev->type->suspend, error);
}
if (error)
goto End;
@@ -704,7 +678,7 @@ static int dpm_suspend(pm_message_t state)
get_device(dev);
mutex_unlock(&dpm_list_mtx);
- error = suspend_device(dev, state);
+ error = device_suspend(dev, state);
mutex_lock(&dpm_list_mtx);
if (error) {
@@ -723,11 +697,11 @@ static int dpm_suspend(pm_message_t state)
}
/**
- * prepare_device - Execute the ->prepare() callback(s) for given device.
+ * device_prepare - Execute the ->prepare() callback(s) for given device.
* @dev: Device.
* @state: PM transition of the system being carried out.
*/
-static int prepare_device(struct device *dev, pm_message_t state)
+static int device_prepare(struct device *dev, pm_message_t state)
{
int error = 0;
@@ -781,7 +755,7 @@ static int dpm_prepare(pm_message_t state)
dev->power.status = DPM_PREPARING;
mutex_unlock(&dpm_list_mtx);
- error = prepare_device(dev, state);
+ error = device_prepare(dev, state);
mutex_lock(&dpm_list_mtx);
if (error) {
@@ -807,12 +781,12 @@ static int dpm_prepare(pm_message_t state)
}
/**
- * device_suspend - Save state and stop all devices in system.
+ * dpm_suspend_start - Save state and stop all devices in system.
* @state: PM transition of the system being carried out.
*
* Prepare and suspend all devices.
*/
-int device_suspend(pm_message_t state)
+int dpm_suspend_start(pm_message_t state)
{
int error;
@@ -822,7 +796,7 @@ int device_suspend(pm_message_t state)
error = dpm_suspend(state);
return error;
}
-EXPORT_SYMBOL_GPL(device_suspend);
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
void __suspend_report_result(const char *function, void *fn, int ret)
{
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 3236b434b96..9742a78c9fe 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -343,11 +343,15 @@ static void __sysdev_resume(struct sys_device *dev)
/* First, call the class-specific one */
if (cls->resume)
cls->resume(dev);
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled after %pF\n", cls->resume);
/* Call auxillary drivers next. */
list_for_each_entry(drv, &cls->drivers, entry) {
if (drv->resume)
drv->resume(dev);
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled after %pF\n", drv->resume);
}
}
@@ -377,6 +381,9 @@ int sysdev_suspend(pm_message_t state)
if (ret)
return ret;
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled while suspending system devices\n");
+
pr_debug("Suspending System Devices\n");
list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
@@ -393,6 +400,9 @@ int sysdev_suspend(pm_message_t state)
if (ret)
goto aux_driver;
}
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled after %pF\n",
+ drv->suspend);
}
/* Now call the generic one */
@@ -400,6 +410,9 @@ int sysdev_suspend(pm_message_t state)
ret = cls->suspend(sysdev, state);
if (ret)
goto cls_driver;
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled after %pF\n",
+ cls->suspend);
}
}
}
@@ -452,6 +465,9 @@ int sysdev_resume(void)
{
struct sysdev_class *cls;
+ WARN_ONCE(!irqs_disabled(),
+ "Interrupts enabled while resuming system devices\n");
+
pr_debug("Resuming System Devices\n");
list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index fddc2025dec..10d03d7931c 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -43,7 +43,7 @@ static int xen_suspend(void *data)
if (err) {
printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
err);
- device_power_up(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
return err;
}
@@ -69,7 +69,7 @@ static int xen_suspend(void *data)
}
sysdev_resume();
- device_power_up(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
return 0;
}
@@ -92,18 +92,18 @@ static void do_suspend(void)
}
#endif
- err = device_suspend(PMSG_SUSPEND);
+ err = dpm_suspend_start(PMSG_SUSPEND);
if (err) {
- printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+ printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
goto out;
}
printk(KERN_DEBUG "suspending xenstore...\n");
xs_suspend();
- err = device_power_down(PMSG_SUSPEND);
+ err = dpm_suspend_noirq(PMSG_SUSPEND);
if (err) {
- printk(KERN_ERR "device_power_down failed: %d\n", err);
+ printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
goto resume_devices;
}
@@ -119,10 +119,10 @@ static void do_suspend(void)
} else
xs_suspend_cancel();
- device_power_up(PMSG_RESUME);
+ dpm_resume_noirq(PMSG_RESUME);
resume_devices:
- device_resume(PMSG_RESUME);
+ dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
clock_was_set();
diff --git a/include/linux/device.h b/include/linux/device.h
index 5d5c197bad4..a4a7b10aaa4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -62,8 +62,6 @@ struct bus_type {
void (*shutdown)(struct device *dev);
int (*suspend)(struct device *dev, pm_message_t state);
- int (*suspend_late)(struct device *dev, pm_message_t state);
- int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
struct dev_pm_ops *pm;
@@ -291,9 +289,6 @@ struct device_type {
int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
void (*release)(struct device *dev);
- int (*suspend)(struct device *dev, pm_message_t state);
- int (*resume)(struct device *dev);
-
struct dev_pm_ops *pm;
};
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index ff374ceface..c41e812e9d5 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
/* The following three functions are for the core kernel use only. */
+#ifdef CONFIG_GENERIC_HARDIRQS
extern void suspend_device_irqs(void);
extern void resume_device_irqs(void);
#ifdef CONFIG_PM_SLEEP
@@ -190,6 +191,11 @@ extern int check_wakeup_irqs(void);
#else
static inline int check_wakeup_irqs(void) { return 0; }
#endif
+#else
+static inline void suspend_device_irqs(void) { };
+static inline void resume_device_irqs(void) { };
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 1d4e2d28982..b3f74764a58 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -382,14 +382,13 @@ struct dev_pm_info {
#ifdef CONFIG_PM_SLEEP
extern void device_pm_lock(void);
extern int sysdev_resume(void);
-extern void device_power_up(pm_message_t state);
-extern void device_resume(pm_message_t state);
+extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
extern void device_pm_unlock(void);
extern int sysdev_suspend(pm_message_t state);
-extern int device_power_down(pm_message_t state);
-extern int device_suspend(pm_message_t state);
-extern int device_prepare_suspend(pm_message_t state);
+extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
extern void __suspend_report_result(const char *function, void *fn, int ret);
@@ -403,7 +402,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
#define device_pm_lock() do {} while (0)
#define device_pm_unlock() do {} while (0)
-static inline int device_suspend(pm_message_t state)
+static inline int dpm_suspend_start(pm_message_t state)
{
return 0;
}
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 795032edfc4..cd15df6c63c 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -245,11 +245,6 @@ extern unsigned long get_safe_page(gfp_t gfp_mask);
extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
extern int hibernate(void);
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
extern bool system_entering_hibernation(void);
#else /* CONFIG_HIBERNATION */
static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
@@ -258,6 +253,16 @@ static inline void swsusp_unset_page_free(struct page *p) {}
static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
static inline int hibernate(void) { return -ENOSYS; }
+static inline bool system_entering_hibernation(void) { return false; }
+#endif /* CONFIG_HIBERNATION */
+
+#ifdef CONFIG_HIBERNATION_NVS
+extern int hibernate_nvs_register(unsigned long start, unsigned long size);
+extern int hibernate_nvs_alloc(void);
+extern void hibernate_nvs_free(void);
+extern void hibernate_nvs_save(void);
+extern void hibernate_nvs_restore(void);
+#else /* CONFIG_HIBERNATION_NVS */
static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
{
return 0;
@@ -266,8 +271,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; }
static inline void hibernate_nvs_free(void) {}
static inline void hibernate_nvs_save(void) {}
static inline void hibernate_nvs_restore(void) {}
-static inline bool system_entering_hibernation(void) { return false; }
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION_NVS */
#ifdef CONFIG_PM_SLEEP
void save_processor_state(void);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index e4983770913..ae1c35201cc 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1448,17 +1448,17 @@ int kernel_kexec(void)
goto Restore_console;
}
suspend_console();
- error = device_suspend(PMSG_FREEZE);
+ error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Resume_console;
- /* At this point, device_suspend() has been called,
- * but *not* device_power_down(). We *must*
- * device_power_down() now. Otherwise, drivers for
+ /* At this point, dpm_suspend_start() has been called,
+ * but *not* dpm_suspend_noirq(). We *must* call
+ * dpm_suspend_noirq() now. Otherwise, drivers for
* some devices (e.g. interrupt controllers) become
* desynchronized with the actual state of the
* hardware at resume time, and evil weirdness ensues.
*/
- error = device_power_down(PMSG_FREEZE);
+ error = dpm_suspend_noirq(PMSG_FREEZE);
if (error)
goto Resume_devices;
error = disable_nonboot_cpus();
@@ -1486,9 +1486,9 @@ int kernel_kexec(void)
local_irq_enable();
Enable_cpus:
enable_nonboot_cpus();
- device_power_up(PMSG_RESTORE);
+ dpm_resume_noirq(PMSG_RESTORE);
Resume_devices:
- device_resume(PMSG_RESTORE);
+ dpm_resume_end(PMSG_RESTORE);
Resume_console:
resume_console();
thaw_processes();
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 23bd4daeb96..72067cbdb37 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -116,9 +116,13 @@ config SUSPEND_FREEZER
Turning OFF this setting is NOT recommended! If in doubt, say Y.
+config HIBERNATION_NVS
+ bool
+
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
+ select HIBERNATION_NVS if HAS_IOMEM
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 720ea4f781b..c3b81c30e5d 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -6,6 +6,9 @@ endif
obj-$(CONFIG_PM) += main.o
obj-$(CONFIG_PM_SLEEP) += console.o
obj-$(CONFIG_FREEZER) += process.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
+obj-$(CONFIG_SUSPEND) += suspend.o
+obj-$(CONFIG_PM_TEST_SUSPEND) += suspend_test.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION_NVS) += hibernate_nvs.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
diff --git a/kernel/power/disk.c b/kernel/power/hibernate.c
index 5cb080e7eeb..81d2e746489 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/hibernate.c
@@ -1,12 +1,12 @@
/*
- * kernel/power/disk.c - Suspend-to-disk support.
+ * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
* Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
*
* This file is released under the GPLv2.
- *
*/
#include <linux/suspend.h>
@@ -215,13 +215,13 @@ static int create_image(int platform_mode)
if (error)
return error;
- /* At this point, device_suspend() has been called, but *not*
- * device_power_down(). We *must* call device_power_down() now.
+ /* At this point, dpm_suspend_start() has been called, but *not*
+ * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
* become desynchronized with the actual state of the hardware
* at resume time, and evil weirdness ensues.
*/
- error = device_power_down(PMSG_FREEZE);
+ error = dpm_suspend_noirq(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
@@ -262,7 +262,7 @@ static int create_image(int platform_mode)
Power_up:
sysdev_resume();
- /* NOTE: device_power_up() is just a resume() for devices
+ /* NOTE: dpm_resume_noirq() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
@@ -275,7 +275,7 @@ static int create_image(int platform_mode)
Platform_finish:
platform_finish(platform_mode);
- device_power_up(in_suspend ?
+ dpm_resume_noirq(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
return error;
@@ -304,7 +304,7 @@ int hibernation_snapshot(int platform_mode)
goto Close;
suspend_console();
- error = device_suspend(PMSG_FREEZE);
+ error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Recover_platform;
@@ -315,7 +315,7 @@ int hibernation_snapshot(int platform_mode)
/* Control returns here after successful restore */
Resume_devices:
- device_resume(in_suspend ?
+ dpm_resume_end(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
resume_console();
Close:
@@ -339,7 +339,7 @@ static int resume_target_kernel(bool platform_mode)
{
int error;
- error = device_power_down(PMSG_QUIESCE);
+ error = dpm_suspend_noirq(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
@@ -394,7 +394,7 @@ static int resume_target_kernel(bool platform_mode)
Cleanup:
platform_restore_cleanup(platform_mode);
- device_power_up(PMSG_RECOVER);
+ dpm_resume_noirq(PMSG_RECOVER);
return error;
}
@@ -414,10 +414,10 @@ int hibernation_restore(int platform_mode)
pm_prepare_console();
suspend_console();
- error = device_suspend(PMSG_QUIESCE);
+ error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
- device_resume(PMSG_RECOVER);
+ dpm_resume_end(PMSG_RECOVER);
}
resume_console();
pm_restore_console();
@@ -447,14 +447,14 @@ int hibernation_platform_enter(void)
entering_platform_hibernation = true;
suspend_console();
- error = device_suspend(PMSG_HIBERNATE);
+ error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
hibernation_ops->recover();
goto Resume_devices;
}
- error = device_power_down(PMSG_HIBERNATE);
+ error = dpm_suspend_noirq(PMSG_HIBERNATE);
if (error)
goto Resume_devices;
@@ -479,11 +479,11 @@ int hibernation_platform_enter(void)
Platofrm_finish:
hibernation_ops->finish();
- device_power_up(PMSG_RESTORE);
+ dpm_suspend_noirq(PMSG_RESTORE);
Resume_devices:
entering_platform_hibernation = false;
- device_resume(PMSG_RESTORE);
+ dpm_resume_end(PMSG_RESTORE);
resume_console();
Close:
diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/hibernate_nvs.c
new file mode 100644
index 00000000000..39ac698ef83
--- /dev/null
+++ b/kernel/power/hibernate_nvs.c
@@ -0,0 +1,135 @@
+/*
+ * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
+ *
+ * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/suspend.h>
+
+/*
+ * Platforms, like ACPI, may want us to save some memory used by them during
+ * hibernation and to restore the contents of this memory during the subsequent
+ * resume. The code below implements a mechanism allowing us to do that.
+ */
+
+struct nvs_page {
+ unsigned long phys_start;
+ unsigned int size;
+ void *kaddr;
+ void *data;
+ struct list_head node;
+};
+
+static LIST_HEAD(nvs_list);
+
+/**
+ * hibernate_nvs_register - register platform NVS memory region to save
+ * @start - physical address of the region
+ * @size - size of the region
+ *
+ * The NVS region need not be page-aligned (both ends) and we arrange
+ * things so that the data from page-aligned addresses in this region will
+ * be copied into separate RAM pages.
+ */
+int hibernate_nvs_register(unsigned long start, unsigned long size)
+{
+ struct nvs_page *entry, *next;
+
+ while (size > 0) {
+ unsigned int nr_bytes;
+
+ entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
+ if (!entry)
+ goto Error;
+
+ list_add_tail(&entry->node, &nvs_list);
+ entry->phys_start = start;
+ nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
+ entry->size = (size < nr_bytes) ? size : nr_bytes;
+
+ start += entry->size;
+ size -= entry->size;
+ }
+ return 0;
+
+ Error:
+ list_for_each_entry_safe(entry, next, &nvs_list, node) {
+ list_del(&entry->node);
+ kfree(entry);
+ }
+ return -ENOMEM;
+}
+
+/**
+ * hibernate_nvs_free - free data pages allocated for saving NVS regions
+ */
+void hibernate_nvs_free(void)
+{
+ struct nvs_page *entry;
+
+ list_for_each_entry(entry, &nvs_list, node)
+ if (entry->data) {
+ free_page((unsigned long)entry->data);
+ entry->data = NULL;
+ if (entry->kaddr) {
+ iounmap(entry->kaddr);
+ entry->kaddr = NULL;
+ }
+ }
+}
+
+/**
+ * hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ */
+int hibernate_nvs_alloc(void)
+{
+ struct nvs_page *entry;
+
+ list_for_each_entry(entry, &nvs_list, node) {
+ entry->data = (void *)__get_free_page(GFP_KERNEL);
+ if (!entry->data) {
+ hibernate_nvs_free();
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+/**
+ * hibernate_nvs_save - save NVS memory regions
+ */
+void hibernate_nvs_save(void)
+{
+ struct nvs_page *entry;
+
+ printk(KERN_INFO "PM: Saving platform NVS memory\n");
+
+ list_for_each_entry(entry, &nvs_list, node)
+ if (entry->data) {
+ entry->kaddr = ioremap(entry->phys_start, entry->size);
+ memcpy(entry->data, entry->kaddr, entry->size);
+ }
+}
+
+/**
+ * hibernate_nvs_restore - restore NVS memory regions
+ *
+ * This function is going to be called with interrupts disabled, so it
+ * cannot iounmap the virtual addresses used to access the NVS region.
+ */
+void hibernate_nvs_restore(void)
+{
+ struct nvs_page *entry;
+
+ printk(KERN_INFO "PM: Restoring platform NVS memory\n");
+
+ list_for_each_entry(entry, &nvs_list, node)
+ if (entry->data)
+ memcpy(entry->kaddr, entry->data, entry->size);
+}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 868028280d1..f710e36930c 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -8,20 +8,9 @@
*
*/
-#include <linux/module.h>
-#include <linux/suspend.h>
#include <linux/kobject.h>
#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/cpu.h>
#include <linux/resume-trace.h>
-#include <linux/freezer.h>
-#include <linux/vmstat.h>
-#include <linux/syscalls.h>
#include "power.h"
@@ -119,373 +108,6 @@ power_attr(pm_test);
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_SUSPEND
-
-static int suspend_test(int level)
-{
-#ifdef CONFIG_PM_DEBUG
- if (pm_test_level == level) {
- printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
- mdelay(5000);
- return 1;
- }
-#endif /* !CONFIG_PM_DEBUG */
- return 0;
-}
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-/*
- * We test the system suspend code by setting an RTC wakealarm a short
- * time in the future, then suspending. Suspending the devices won't
- * normally take long ... some systems only need a few milliseconds.
- *
- * The time it takes is system-specific though, so when we test this
- * during system bootup we allow a LOT of time.
- */
-#define TEST_SUSPEND_SECONDS 5
-
-static unsigned long suspend_test_start_time;
-
-static void suspend_test_start(void)
-{
- /* FIXME Use better timebase than "jiffies", ideally a clocksource.
- * What we want is a hardware counter that will work correctly even
- * during the irqs-are-off stages of the suspend/resume cycle...
- */
- suspend_test_start_time = jiffies;
-}
-
-static void suspend_test_finish(const char *label)
-{
- long nj = jiffies - suspend_test_start_time;
- unsigned msec;
-
- msec = jiffies_to_msecs(abs(nj));
- pr_info("PM: %s took %d.%03d seconds\n", label,
- msec / 1000, msec % 1000);
-
- /* Warning on suspend means the RTC alarm period needs to be
- * larger -- the system was sooo slooowwww to suspend that the
- * alarm (should have) fired before the system went to sleep!
- *
- * Warning on either suspend or resume also means the system
- * has some performance issues. The stack dump of a WARN_ON
- * is more likely to get the right attention than a printk...
- */
- WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
-}
-
-#else
-
-static void suspend_test_start(void)
-{
-}
-
-static void suspend_test_finish(const char *label)
-{
-}
-
-#endif
-
-/* This is just an arbitrary number */
-#define FREE_PAGE_NUMBER (100)
-
-static struct platform_suspend_ops *suspend_ops;
-
-/**
- * suspend_set_ops - Set the global suspend method table.
- * @ops: Pointer to ops structure.
- */
-
-void suspend_set_ops(struct platform_suspend_ops *ops)
-{
- mutex_lock(&pm_mutex);
- suspend_ops = ops;
- mutex_unlock(&pm_mutex);
-}
-
-/**
- * suspend_valid_only_mem - generic memory-only valid callback
- *
- * Platform drivers that implement mem suspend only and only need
- * to check for that in their .valid callback can use this instead
- * of rolling their own .valid callback.
- */
-int suspend_valid_only_mem(suspend_state_t state)
-{
- return state == PM_SUSPEND_MEM;
-}
-
-/**
- * suspend_prepare - Do prep work before entering low-power state.
- *
- * This is common code that is called for each state that we're entering.
- * Run suspend notifiers, allocate a console and stop all processes.
- */
-static int suspend_prepare(void)
-{
- int error;
- unsigned int free_pages;
-
- if (!suspend_ops || !suspend_ops->enter)
- return -EPERM;
-
- pm_prepare_console();
-
- error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
- if (error)
- goto Finish;
-
- error = usermodehelper_disable();
- if (error)
- goto Finish;
-
- if (suspend_freeze_processes()) {
- error = -EAGAIN;
- goto Thaw;
- }
-
- free_pages = global_page_state(NR_FREE_PAGES);
- if (free_pages < FREE_PAGE_NUMBER) {
- pr_debug("PM: free some memory\n");
- shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
- if (nr_free_pages() < FREE_PAGE_NUMBER) {
- error = -ENOMEM;
- printk(KERN_ERR "PM: No enough memory\n");
- }
- }
- if (!error)
- return 0;
-
- Thaw:
- suspend_thaw_processes();
- usermodehelper_enable();
- Finish:
- pm_notifier_call_chain(PM_POST_SUSPEND);
- pm_restore_console();
- return error;
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
-{
- local_irq_disable();
-}
-
-/* default implementation */
-void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
-{
- local_irq_enable();
-}
-
-/**
- * suspend_enter - enter the desired system sleep state.
- * @state: state to enter
- *
- * This function should be called after devices have been suspended.
- */
-static int suspend_enter(suspend_state_t state)
-{
- int error;
-
- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
- if (error)
- return error;
- }
-
- error = device_power_down(PMSG_SUSPEND);
- if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down\n");
- goto Platfrom_finish;
- }
-
- if (suspend_ops->prepare_late) {
- error = suspend_ops->prepare_late();
- if (error)
- goto Power_up_devices;
- }
-
- if (suspend_test(TEST_PLATFORM))
- goto Platform_wake;
-
- error = disable_nonboot_cpus();
- if (error || suspend_test(TEST_CPUS))
- goto Enable_cpus;
-
- arch_suspend_disable_irqs();
- BUG_ON(!irqs_disabled());
-
- error = sysdev_suspend(PMSG_SUSPEND);
- if (!error) {
- if (!suspend_test(TEST_CORE))
- error = suspend_ops->enter(state);
- sysdev_resume();
- }
-
- arch_suspend_enable_irqs();
- BUG_ON(irqs_disabled());
-
- Enable_cpus:
- enable_nonboot_cpus();
-
- Platform_wake:
- if (suspend_ops->wake)
- suspend_ops->wake();
-
- Power_up_devices:
- device_power_up(PMSG_RESUME);
-
- Platfrom_finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
-
- return error;
-}
-
-/**
- * suspend_devices_and_enter - suspend devices and enter the desired system
- * sleep state.
- * @state: state to enter
- */
-int suspend_devices_and_enter(suspend_state_t state)
-{
- int error;
-
- if (!suspend_ops)
- return -ENOSYS;
-
- if (suspend_ops->begin) {
- error = suspend_ops->begin(state);
- if (error)
- goto Close;
- }
- suspend_console();
- suspend_test_start();
- error = device_suspend(PMSG_SUSPEND);
- if (error) {
- printk(KERN_ERR "PM: Some devices failed to suspend\n");
- goto Recover_platform;
- }
- suspend_test_finish("suspend devices");
- if (suspend_test(TEST_DEVICES))
- goto Recover_platform;
-
- suspend_enter(state);
-
- Resume_devices:
- suspend_test_start();
- device_resume(PMSG_RESUME);
- suspend_test_finish("resume devices");
- resume_console();
- Close:
- if (suspend_ops->end)
- suspend_ops->end();
- return error;
-
- Recover_platform:
- if (suspend_ops->recover)
- suspend_ops->recover();
- goto Resume_devices;
-}
-
-/**
- * suspend_finish - Do final work before exiting suspend sequence.
- *
- * Call platform code to clean up, restart processes, and free the
- * console that we've allocated. This is not called for suspend-to-disk.
- */
-static void suspend_finish(void)
-{
- suspend_thaw_processes();
- usermodehelper_enable();
- pm_notifier_call_chain(PM_POST_SUSPEND);
- pm_restore_console();
-}
-
-
-
-
-static const char * const pm_states[PM_SUSPEND_MAX] = {
- [PM_SUSPEND_STANDBY] = "standby",
- [PM_SUSPEND_MEM] = "mem",
-};
-
-static inline int valid_state(suspend_state_t state)
-{
- /* All states need lowlevel support and need to be valid
- * to the lowlevel implementation, no valid callback
- * implies that none are valid. */
- if (!suspend_ops || !suspend_ops->valid || !suspend_ops->valid(state))
- return 0;
- return 1;
-}
-
-
-/**
- * enter_state - Do common work of entering low-power state.
- * @state: pm_state structure for state we're entering.
- *
- * Make sure we're the only ones trying to enter a sleep state. Fail
- * if someone has beat us to it, since we don't want anything weird to
- * happen when we wake up.
- * Then, do the setup for suspend, enter the state, and cleaup (after
- * we've woken up).
- */
-static int enter_state(suspend_state_t state)
-{
- int error;
-
- if (!valid_state(state))
- return -ENODEV;
-
- if (!mutex_trylock(&pm_mutex))
- return -EBUSY;
-
- printk(KERN_INFO "PM: Syncing filesystems ... ");
- sys_sync();
- printk("done.\n");
-
- pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
- error = suspend_prepare();
- if (error)
- goto Unlock;
-
- if (suspend_test(TEST_FREEZER))
- goto Finish;
-
- pr_debug("PM: Entering %s sleep\n", pm_states[state]);
- error = suspend_devices_and_enter(state);
-
- Finish:
- pr_debug("PM: Finishing wakeup.\n");
- suspend_finish();
- Unlock:
- mutex_unlock(&pm_mutex);
- return error;
-}
-
-
-/**
- * pm_suspend - Externally visible function for suspending system.
- * @state: Enumerated value of state to enter.
- *
- * Determine whether or not value is within range, get state
- * structure, and enter (above).
- */
-
-int pm_suspend(suspend_state_t state)
-{
- if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
- return enter_state(state);
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(pm_suspend);
-
-#endif /* CONFIG_SUSPEND */
-
struct kobject *power_kobj;
/**
@@ -498,7 +120,6 @@ struct kobject *power_kobj;
* store() accepts one of those strings, translates it into the
* proper enumerated value, and initiates a suspend transition.
*/
-
static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
@@ -596,7 +217,6 @@ static struct attribute_group attr_group = {
.attrs = g,
};
-
static int __init pm_init(void)
{
power_kobj = kobject_create_and_add("power", NULL);
@@ -606,144 +226,3 @@ static int __init pm_init(void)
}
core_initcall(pm_init);
-
-
-#ifdef CONFIG_PM_TEST_SUSPEND
-
-#include <linux/rtc.h>
-
-/*
- * To test system suspend, we need a hands-off mechanism to resume the
- * system. RTCs wake alarms are a common self-contained mechanism.
- */
-
-static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
-{
- static char err_readtime[] __initdata =
- KERN_ERR "PM: can't read %s time, err %d\n";
- static char err_wakealarm [] __initdata =
- KERN_ERR "PM: can't set %s wakealarm, err %d\n";
- static char err_suspend[] __initdata =
- KERN_ERR "PM: suspend test failed, error %d\n";
- static char info_test[] __initdata =
- KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
-
- unsigned long now;
- struct rtc_wkalrm alm;
- int status;
-
- /* this may fail if the RTC hasn't been initialized */
- status = rtc_read_time(rtc, &alm.time);
- if (status < 0) {
- printk(err_readtime, dev_name(&rtc->dev), status);
- return;
- }
- rtc_tm_to_time(&alm.time, &now);
-
- memset(&alm, 0, sizeof alm);
- rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
- alm.enabled = true;
-
- status = rtc_set_alarm(rtc, &alm);
- if (status < 0) {
- printk(err_wakealarm, dev_name(&rtc->dev), status);
- return;
- }
-
- if (state == PM_SUSPEND_MEM) {
- printk(info_test, pm_states[state]);
- status = pm_suspend(state);
- if (status == -ENODEV)
- state = PM_SUSPEND_STANDBY;
- }
- if (state == PM_SUSPEND_STANDBY) {
- printk(info_test, pm_states[state]);
- status = pm_suspend(state);
- }
- if (status < 0)
- printk(err_suspend, status);
-
- /* Some platforms can't detect that the alarm triggered the
- * wakeup, or (accordingly) disable it after it afterwards.
- * It's supposed to give oneshot behavior; cope.
- */
- alm.enabled = false;
- rtc_set_alarm(rtc, &alm);
-}
-
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
- struct rtc_device *candidate = to_rtc_device(dev);
-
- if (!candidate->ops->set_alarm)
- return 0;
- if (!device_may_wakeup(candidate->dev.parent))
- return 0;
-
- *(const char **)name_ptr = dev_name(dev);
- return 1;
-}
-
-/*
- * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
- * at startup time. They're normally disabled, for faster boot and because
- * we can't know which states really work on this particular system.
- */
-static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
-
-static char warn_bad_state[] __initdata =
- KERN_WARNING "PM: can't test '%s' suspend state\n";
-
-static int __init setup_test_suspend(char *value)
-{
- unsigned i;
-
- /* "=mem" ==> "mem" */
- value++;
- for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (!pm_states[i])
- continue;
- if (strcmp(pm_states[i], value) != 0)
- continue;
- test_state = (__force suspend_state_t) i;
- return 0;
- }
- printk(warn_bad_state, value);
- return 0;
-}
-__setup("test_suspend", setup_test_suspend);
-
-static int __init test_suspend(void)
-{
- static char warn_no_rtc[] __initdata =
- KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
-
- char *pony = NULL;
- struct rtc_device *rtc = NULL;
-
- /* PM is initialized by now; is that state testable? */
- if (test_state == PM_SUSPEND_ON)
- goto done;
- if (!valid_state(test_state)) {
- printk(warn_bad_state, pm_states[test_state]);
- goto done;
- }
-
- /* RTCs have initialized by now too ... can we use one? */
- class_find_device(rtc_class, NULL, &pony, has_wakealarm);
- if (pony)
- rtc = rtc_class_open(pony);
- if (!rtc) {
- printk(warn_no_rtc);
- goto done;
- }
-
- /* go for it */
- test_wakealarm(rtc, test_state);
- rtc_class_close(rtc);
-done:
- return 0;
-}
-late_initcall(test_suspend);
-
-#endif /* CONFIG_PM_TEST_SUSPEND */
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 46b5ec7a3af..26d5a26f82e 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -45,7 +45,7 @@ static inline char *check_image_kernel(struct swsusp_info *info)
*/
#define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
extern int hibernation_snapshot(int platform_mode);
extern int hibernation_restore(int platform_mode);
extern int hibernation_platform_enter(void);
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resume(void);
extern int create_basic_memory_bitmaps(void);
extern void free_basic_memory_bitmaps(void);
-extern unsigned int count_data_pages(void);
+extern int swsusp_shrink_memory(void);
/**
* Auxiliary structure used for reading the snapshot image data and
@@ -147,9 +147,8 @@ extern int swsusp_swap_in_use(void);
*/
#define SF_PLATFORM_MODE 1
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
extern int swsusp_check(void);
-extern int swsusp_shrink_memory(void);
extern void swsusp_free(void);
extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags);
@@ -161,22 +160,36 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *,
unsigned int, char *);
#ifdef CONFIG_SUSPEND
-/* kernel/power/main.c */
+/* kernel/power/suspend.c */
+extern const char *const pm_states[];
+
+extern bool valid_state(suspend_state_t state);
extern int suspend_devices_and_enter(suspend_state_t state);
+extern int enter_state(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
static inline int suspend_devices_and_enter(suspend_state_t state)
{
return -ENOSYS;
}
+static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
+static inline bool valid_state(suspend_state_t state) { return false; }
#endif /* !CONFIG_SUSPEND */
+#ifdef CONFIG_PM_TEST_SUSPEND
+/* kernel/power/suspend_test.c */
+extern void suspend_test_start(void);
+extern void suspend_test_finish(const char *label);
+#else /* !CONFIG_PM_TEST_SUSPEND */
+static inline void suspend_test_start(void) {}
+static inline void suspend_test_finish(const char *label) {}
+#endif /* !CONFIG_PM_TEST_SUSPEND */
+
#ifdef CONFIG_PM_SLEEP
/* kernel/power/main.c */
extern int pm_notifier_call_chain(unsigned long val);
#endif
#ifdef CONFIG_HIGHMEM
-unsigned int count_highmem_pages(void);
int restore_highmem(void);
#else
static inline unsigned int count_highmem_pages(void) { return 0; }
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 33e2e4a819f..523a451b45d 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct page *);
static void swsusp_set_page_forbidden(struct page *);
static void swsusp_unset_page_forbidden(struct page *);
+/*
+ * Preferred image size in bytes (tunable via /sys/power/image_size).
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
+ */
+unsigned long image_size = 500 * 1024 * 1024;
+
/* List of PBEs needed for restoring the pages that were allocated before
* the suspend and included in the suspend image, but have also been
* allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_page(struct zone *zone, unsigned long pfn)
* pages.
*/
-unsigned int count_highmem_pages(void)
+static unsigned int count_highmem_pages(void)
{
struct zone *zone;
unsigned int n = 0;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct zone *zone, unsigned long pfn)
* pages.
*/
-unsigned int count_data_pages(void)
+static unsigned int count_data_pages(void)
{
struct zone *zone;
unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void)
buffer = NULL;
}
+/**
+ * swsusp_shrink_memory - Try to free as much memory as needed
+ *
+ * ... but do not OOM-kill anyone
+ *
+ * Notice: all userland should be stopped before it is called, or
+ * livelock is possible.
+ */
+
+#define SHRINK_BITE 10000
+static inline unsigned long __shrink_memory(long tmp)
+{
+ if (tmp > SHRINK_BITE)
+ tmp = SHRINK_BITE;
+ return shrink_all_memory(tmp);
+}
+
+int swsusp_shrink_memory(void)
+{
+ long tmp;
+ struct zone *zone;
+ unsigned long pages = 0;
+ unsigned int i = 0;
+ char *p = "-\\|/";
+ struct timeval start, stop;
+
+ printk(KERN_INFO "PM: Shrinking memory... ");
+ do_gettimeofday(&start);
+ do {
+ long size, highmem_size;
+
+ highmem_size = count_highmem_pages();
+ size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
+ tmp = size;
+ size += highmem_size;
+ for_each_populated_zone(zone) {
+ tmp += snapshot_additional_pages(zone);
+ if (is_highmem(zone)) {
+ highmem_size -=
+ zone_page_state(zone, NR_FREE_PAGES);
+ } else {
+ tmp -= zone_page_state(zone, NR_FREE_PAGES);
+ tmp += zone->lowmem_reserve[ZONE_NORMAL];
+ }
+ }
+
+ if (highmem_size < 0)
+ highmem_size = 0;
+
+ tmp += highmem_size;
+ if (tmp > 0) {
+ tmp = __shrink_memory(tmp);
+ if (!tmp)
+ return -ENOMEM;
+ pages += tmp;
+ } else if (size > image_size / PAGE_SIZE) {
+ tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
+ pages += tmp;
+ }
+ printk("\b%c", p[i++%4]);
+ } while (tmp > 0);
+ do_gettimeofday(&stop);
+ printk("\bdone (%lu pages freed)\n", pages);
+ swsusp_show_speed(&start, &stop, pages, "Freed");
+
+ return 0;
+}
+
#ifdef CONFIG_HIGHMEM
/**
* count_pages_for_highmem - compute the number of non-highmem pages
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
new file mode 100644
index 00000000000..6f10dfc2d3e
--- /dev/null
+++ b/kernel/power/suspend.c
@@ -0,0 +1,300 @@
+/*
+ * kernel/power/suspend.c - Suspend to RAM and standby functionality.
+ *
+ * Copyright (c) 2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/syscalls.h>
+
+#include "power.h"
+
+const char *const pm_states[PM_SUSPEND_MAX] = {
+ [PM_SUSPEND_STANDBY] = "standby",
+ [PM_SUSPEND_MEM] = "mem",
+};
+
+static struct platform_suspend_ops *suspend_ops;
+
+/**
+ * suspend_set_ops - Set the global suspend method table.
+ * @ops: Pointer to ops structure.
+ */
+void suspend_set_ops(struct platform_suspend_ops *ops)
+{
+ mutex_lock(&pm_mutex);
+ suspend_ops = ops;
+ mutex_unlock(&pm_mutex);
+}
+
+bool valid_state(suspend_state_t state)
+{
+ /*
+ * All states need lowlevel support and need to be valid to the lowlevel
+ * implementation, no valid callback implies that none are valid.
+ */
+ return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
+}
+
+/**
+ * suspend_valid_only_mem - generic memory-only valid callback
+ *
+ * Platform drivers that implement mem suspend only and only need
+ * to check for that in their .valid callback can use this instead
+ * of rolling their own .valid callback.
+ */
+int suspend_valid_only_mem(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM;
+}
+
+static int suspend_test(int level)
+{
+#ifdef CONFIG_PM_DEBUG
+ if (pm_test_level == level) {
+ printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
+ mdelay(5000);
+ return 1;
+ }
+#endif /* !CONFIG_PM_DEBUG */
+ return 0;
+}
+
+/**
+ * suspend_prepare - Do prep work before entering low-power state.
+ *
+ * This is common code that is called for each state that we're entering.
+ * Run suspend notifiers, allocate a console and stop all processes.
+ */
+static int suspend_prepare(void)
+{
+ int error;
+
+ if (!suspend_ops || !suspend_ops->enter)
+ return -EPERM;
+
+ pm_prepare_console();
+
+ error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+ if (error)
+ goto Finish;
+
+ error = usermodehelper_disable();
+ if (error)
+ goto Finish;
+
+ error = suspend_freeze_processes();
+ if (!error)
+ return 0;
+
+ suspend_thaw_processes();
+ usermodehelper_enable();
+ Finish:
+ pm_notifier_call_chain(PM_POST_SUSPEND);
+ pm_restore_console();
+ return error;
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
+{
+ local_irq_disable();
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
+{
+ local_irq_enable();
+}
+
+/**
+ * suspend_enter - enter the desired system sleep state.
+ * @state: state to enter
+ *
+ * This function should be called after devices have been suspended.
+ */
+static int suspend_enter(suspend_state_t state)
+{
+ int error;
+
+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ return error;
+ }
+
+ error = dpm_suspend_noirq(PMSG_SUSPEND);
+ if (error) {
+ printk(KERN_ERR "PM: Some devices failed to power down\n");
+ goto Platfrom_finish;
+ }
+
+ if (suspend_ops->prepare_late) {
+ error = suspend_ops->prepare_late();
+ if (error)
+ goto Power_up_devices;
+ }
+
+ if (suspend_test(TEST_PLATFORM))
+ goto Platform_wake;
+
+ error = disable_nonboot_cpus();
+ if (error || suspend_test(TEST_CPUS))
+ goto Enable_cpus;
+
+ arch_suspend_disable_irqs();
+ BUG_ON(!irqs_disabled());
+
+ error = sysdev_suspend(PMSG_SUSPEND);
+ if (!error) {
+ if (!suspend_test(TEST_CORE))
+ error = suspend_ops->enter(state);
+ sysdev_resume();
+ }
+
+ arch_suspend_enable_irqs();
+ BUG_ON(irqs_disabled());
+
+ Enable_cpus:
+ enable_nonboot_cpus();
+
+ Platform_wake:
+ if (suspend_ops->wake)
+ suspend_ops->wake();
+
+ Power_up_devices:
+ dpm_resume_noirq(PMSG_RESUME);
+
+ Platfrom_finish:
+ if (suspend_ops->finish)
+ suspend_ops->finish();
+
+ return error;
+}
+
+/**
+ * suspend_devices_and_enter - suspend devices and enter the desired system
+ * sleep state.
+ * @state: state to enter
+ */
+int suspend_devices_and_enter(suspend_state_t state)
+{
+ int error;
+
+ if (!suspend_ops)
+ return -ENOSYS;
+
+ if (suspend_ops->begin) {
+ error = suspend_ops->begin(state);
+ if (error)
+ goto Close;
+ }
+ suspend_console();
+ suspend_test_start();
+ error = dpm_suspend_start(PMSG_SUSPEND);
+ if (error) {
+ printk(KERN_ERR "PM: Some devices failed to suspend\n");
+ goto Recover_platform;
+ }
+ suspend_test_finish("suspend devices");
+ if (suspend_test(TEST_DEVICES))
+ goto Recover_platform;
+
+ suspend_enter(state);
+
+ Resume_devices:
+ suspend_test_start();
+ dpm_resume_end(PMSG_RESUME);
+ suspend_test_finish("resume devices");
+ resume_console();
+ Close:
+ if (suspend_ops->end)
+ suspend_ops->end();
+ return error;
+
+ Recover_platform:
+ if (suspend_ops->recover)
+ suspend_ops->recover();
+ goto Resume_devices;
+}
+
+/**
+ * suspend_finish - Do final work before exiting suspend sequence.
+ *
+ * Call platform code to clean up, restart processes, and free the
+ * console that we've allocated. This is not called for suspend-to-disk.
+ */
+static void suspend_finish(void)
+{
+ suspend_thaw_processes();
+ usermodehelper_enable();
+ pm_notifier_call_chain(PM_POST_SUSPEND);
+ pm_restore_console();
+}
+
+/**
+ * enter_state - Do common work of entering low-power state.
+ * @state: pm_state structure for state we're entering.
+ *
+ * Make sure we're the only ones trying to enter a sleep state. Fail
+ * if someone has beat us to it, since we don't want anything weird to
+ * happen when we wake up.
+ * Then, do the setup for suspend, enter the state, and cleaup (after
+ * we've woken up).
+ */
+int enter_state(suspend_state_t state)
+{
+ int error;
+
+ if (!valid_state(state))
+ return -ENODEV;
+
+ if (!mutex_trylock(&pm_mutex))
+ return -EBUSY;
+
+ printk(KERN_INFO "PM: Syncing filesystems ... ");
+ sys_sync();
+ printk("done.\n");
+
+ pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
+ error = suspend_prepare();
+ if (error)
+ goto Unlock;
+
+ if (suspend_test(TEST_FREEZER))
+ goto Finish;
+
+ pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+ error = suspend_devices_and_enter(state);
+
+ Finish:
+ pr_debug("PM: Finishing wakeup.\n");
+ suspend_finish();
+ Unlock:
+ mutex_unlock(&pm_mutex);
+ return error;
+}
+
+/**
+ * pm_suspend - Externally visible function for suspending system.
+ * @state: Enumerated value of state to enter.
+ *
+ * Determine whether or not value is within range, get state
+ * structure, and enter (above).
+ */
+int pm_suspend(suspend_state_t state)
+{
+ if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+ return enter_state(state);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(pm_suspend);
diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c
new file mode 100644
index 00000000000..17d8bb1acf9
--- /dev/null
+++ b/kernel/power/suspend_test.c
@@ -0,0 +1,187 @@
+/*
+ * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
+ *
+ * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/rtc.h>
+
+#include "power.h"
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending. Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS 5
+
+static unsigned long suspend_test_start_time;
+
+void suspend_test_start(void)
+{
+ /* FIXME Use better timebase than "jiffies", ideally a clocksource.
+ * What we want is a hardware counter that will work correctly even
+ * during the irqs-are-off stages of the suspend/resume cycle...
+ */
+ suspend_test_start_time = jiffies;
+}
+
+void suspend_test_finish(const char *label)
+{
+ long nj = jiffies - suspend_test_start_time;
+ unsigned msec;
+
+ msec = jiffies_to_msecs(abs(nj));
+ pr_info("PM: %s took %d.%03d seconds\n", label,
+ msec / 1000, msec % 1000);
+
+ /* Warning on suspend means the RTC alarm period needs to be
+ * larger -- the system was sooo slooowwww to suspend that the
+ * alarm (should have) fired before the system went to sleep!
+ *
+ * Warning on either suspend or resume also means the system
+ * has some performance issues. The stack dump of a WARN_ON
+ * is more likely to get the right attention than a printk...
+ */
+ WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+}
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system. RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+ static char err_readtime[] __initdata =
+ KERN_ERR "PM: can't read %s time, err %d\n";
+ static char err_wakealarm [] __initdata =
+ KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+ static char err_suspend[] __initdata =
+ KERN_ERR "PM: suspend test failed, error %d\n";
+ static char info_test[] __initdata =
+ KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+ unsigned long now;
+ struct rtc_wkalrm alm;
+ int status;
+
+ /* this may fail if the RTC hasn't been initialized */
+ status = rtc_read_time(rtc, &alm.time);
+ if (status < 0) {
+ printk(err_readtime, dev_name(&rtc->dev), status);
+ return;
+ }
+ rtc_tm_to_time(&alm.time, &now);
+
+ memset(&alm, 0, sizeof alm);
+ rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+ alm.enabled = true;
+
+ status = rtc_set_alarm(rtc, &alm);
+ if (status < 0) {
+ printk(err_wakealarm, dev_name(&rtc->dev), status);
+ return;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ if (status == -ENODEV)
+ state = PM_SUSPEND_STANDBY;
+ }
+ if (state == PM_SUSPEND_STANDBY) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ }
+ if (status < 0)
+ printk(err_suspend, status);
+
+ /* Some platforms can't detect that the alarm triggered the
+ * wakeup, or (accordingly) disable it after it afterwards.
+ * It's supposed to give oneshot behavior; cope.
+ */
+ alm.enabled = false;
+ rtc_set_alarm(rtc, &alm);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(const char **)name_ptr = dev_name(dev);
+ return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time. They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
+
+static char warn_bad_state[] __initdata =
+ KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+ unsigned i;
+
+ /* "=mem" ==> "mem" */
+ value++;
+ for (i = 0; i < PM_SUSPEND_MAX; i++) {
+ if (!pm_states[i])
+ continue;
+ if (strcmp(pm_states[i], value) != 0)
+ continue;
+ test_state = (__force suspend_state_t) i;
+ return 0;
+ }
+ printk(warn_bad_state, value);
+ return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+ static char warn_no_rtc[] __initdata =
+ KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+ char *pony = NULL;
+ struct rtc_device *rtc = NULL;
+
+ /* PM is initialized by now; is that state testable? */
+ if (test_state == PM_SUSPEND_ON)
+ goto done;
+ if (!valid_state(test_state)) {
+ printk(warn_bad_state, pm_states[test_state]);
+ goto done;
+ }
+
+ /* RTCs have initialized by now too ... can we use one? */
+ class_find_device(rtc_class, NULL, &pony, has_wakealarm);
+ if (pony)
+ rtc = rtc_class_open(pony);
+ if (!rtc) {
+ printk(warn_no_rtc);
+ goto done;
+ }
+
+ /* go for it */
+ test_wakealarm(rtc, test_state);
+ rtc_class_close(rtc);
+done:
+ return 0;
+}
+late_initcall(test_suspend);
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 78c35047586..6a07f4dbf2f 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -55,14 +55,6 @@
#include "power.h"
-/*
- * Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, swsusp will do its best to ensure the image
- * size will not exceed N bytes, but if that is impossible, it will
- * try to create the smallest image possible.
- */
-unsigned long image_size = 500 * 1024 * 1024;
-
int in_suspend __nosavedata = 0;
/**
@@ -194,193 +186,3 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,
centisecs / 100, centisecs % 100,
kps / 1000, (kps % 1000) / 10);
}
-
-/**
- * swsusp_shrink_memory - Try to free as much memory as needed
- *
- * ... but do not OOM-kill anyone
- *
- * Notice: all userland should be stopped before it is called, or
- * livelock is possible.
- */
-
-#define SHRINK_BITE 10000
-static inline unsigned long __shrink_memory(long tmp)
-{
- if (tmp > SHRINK_BITE)
- tmp = SHRINK_BITE;
- return shrink_all_memory(tmp);
-}
-
-int swsusp_shrink_memory(void)
-{
- long tmp;
- struct zone *zone;
- unsigned long pages = 0;
- unsigned int i = 0;
- char *p = "-\\|/";
- struct timeval start, stop;
-
- printk(KERN_INFO "PM: Shrinking memory... ");
- do_gettimeofday(&start);
- do {
- long size, highmem_size;
-
- highmem_size = count_highmem_pages();
- size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
- tmp = size;
- size += highmem_size;
- for_each_populated_zone(zone) {
- tmp += snapshot_additional_pages(zone);
- if (is_highmem(zone)) {
- highmem_size -=
- zone_page_state(zone, NR_FREE_PAGES);
- } else {
- tmp -= zone_page_state(zone, NR_FREE_PAGES);
- tmp += zone->lowmem_reserve[ZONE_NORMAL];
- }
- }
-
- if (highmem_size < 0)
- highmem_size = 0;
-
- tmp += highmem_size;
- if (tmp > 0) {
- tmp = __shrink_memory(tmp);
- if (!tmp)
- return -ENOMEM;
- pages += tmp;
- } else if (size > image_size / PAGE_SIZE) {
- tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
- pages += tmp;
- }
- printk("\b%c", p[i++%4]);
- } while (tmp > 0);
- do_gettimeofday(&stop);
- printk("\bdone (%lu pages freed)\n", pages);
- swsusp_show_speed(&start, &stop, pages, "Freed");
-
- return 0;
-}
-
-/*
- * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
- * resume. The code below implements a mechanism allowing us to do that.
- */
-
-struct nvs_page {
- unsigned long phys_start;
- unsigned int size;
- void *kaddr;
- void *data;
- struct list_head node;
-};
-
-static LIST_HEAD(nvs_list);
-
-/**
- * hibernate_nvs_register - register platform NVS memory region to save
- * @start - physical address of the region
- * @size - size of the region
- *
- * The NVS region need not be page-aligned (both ends) and we arrange
- * things so that the data from page-aligned addresses in this region will
- * be copied into separate RAM pages.
- */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
-{
- struct nvs_page *entry, *next;
-
- while (size > 0) {
- unsigned int nr_bytes;
-
- entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
- if (!entry)
- goto Error;
-
- list_add_tail(&entry->node, &nvs_list);
- entry->phys_start = start;
- nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
- entry->size = (size < nr_bytes) ? size : nr_bytes;
-
- start += entry->size;
- size -= entry->size;
- }
- return 0;
-
- Error:
- list_for_each_entry_safe(entry, next, &nvs_list, node) {
- list_del(&entry->node);
- kfree(entry);
- }
- return -ENOMEM;
-}
-
-/**
- * hibernate_nvs_free - free data pages allocated for saving NVS regions
- */
-void hibernate_nvs_free(void)
-{
- struct nvs_page *entry;
-
- list_for_each_entry(entry, &nvs_list, node)
- if (entry->data) {
- free_page((unsigned long)entry->data);
- entry->data = NULL;
- if (entry->kaddr) {
- iounmap(entry->kaddr);
- entry->kaddr = NULL;
- }
- }
-}
-
-/**
- * hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
- */
-int hibernate_nvs_alloc(void)
-{
- struct nvs_page *entry;
-
- list_for_each_entry(entry, &nvs_list, node) {
- entry->data = (void *)__get_free_page(GFP_KERNEL);
- if (!entry->data) {
- hibernate_nvs_free();
- return -ENOMEM;
- }
- }
- return 0;
-}
-
-/**
- * hibernate_nvs_save - save NVS memory regions
- */
-void hibernate_nvs_save(void)
-{
- struct nvs_page *entry;
-
- printk(KERN_INFO "PM: Saving platform NVS memory\n");
-
- list_for_each_entry(entry, &nvs_list, node)
- if (entry->data) {
- entry->kaddr = ioremap(entry->phys_start, entry->size);
- memcpy(entry->data, entry->kaddr, entry->size);
- }
-}
-
-/**
- * hibernate_nvs_restore - restore NVS memory regions
- *
- * This function is going to be called with interrupts disabled, so it
- * cannot iounmap the virtual addresses used to access the NVS region.
- */
-void hibernate_nvs_restore(void)
-{
- struct nvs_page *entry;
-
- printk(KERN_INFO "PM: Restoring platform NVS memory\n");
-
- list_for_each_entry(entry, &nvs_list, node)
- if (entry->data)
- memcpy(entry->kaddr, entry->data, entry->size);
-}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d254306562c..95c08a8cc2b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2056,7 +2056,7 @@ unsigned long global_lru_pages(void)
+ global_page_state(NR_INACTIVE_FILE);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_HIBERNATION
/*
* Helper function for shrink_all_memory(). Tries to reclaim 'nr_pages' pages
* from LRU lists system-wide, for given pass and priority.
@@ -2196,7 +2196,7 @@ out:
return sc.nr_reclaimed;
}
-#endif
+#endif /* CONFIG_HIBERNATION */
/* It's optimal to keep kswapds on the same CPUs as their memory, but
not required for correctness. So if the last cpu in a node goes