diff options
| -rw-r--r-- | drivers/char/isicom.c | 66 | ||||
| -rw-r--r-- | drivers/char/istallion.c | 78 | ||||
| -rw-r--r-- | drivers/char/mxser.c | 56 | ||||
| -rw-r--r-- | drivers/char/riscom8.c | 49 | ||||
| -rw-r--r-- | drivers/char/stallion.c | 39 | ||||
| -rw-r--r-- | drivers/char/synclink.c | 58 | ||||
| -rw-r--r-- | drivers/char/synclink_gt.c | 51 | ||||
| -rw-r--r-- | drivers/char/synclinkmp.c | 58 | ||||
| -rw-r--r-- | drivers/char/tty_port.c | 58 | ||||
| -rw-r--r-- | include/linux/istallion.h | 1 | ||||
| -rw-r--r-- | include/linux/tty.h | 3 |
11 files changed, 126 insertions, 391 deletions
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index bac55cf4424..24aa6e88e22 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -945,76 +945,30 @@ static void isicom_flush_buffer(struct tty_struct *tty) static void isicom_close(struct tty_struct *tty, struct file *filp) { - struct isi_port *port = tty->driver_data; + struct isi_port *ip = tty->driver_data; + struct tty_port *port = &ip->port; struct isi_board *card; unsigned long flags; - if (!port) - return; - card = port->card; - if (isicom_paranoia_check(port, tty->name, "isicom_close")) - return; - - pr_dbg("Close start!!!.\n"); - - spin_lock_irqsave(&port->port.lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->port.lock, flags); - return; - } - - if (tty->count == 1 && port->port.count != 1) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count tty->count = 1 port count = %d.\n", - card->base, port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port " - "count for channel%d = %d", card->base, port->channel, - port->port.count); - port->port.count = 0; - } + BUG_ON(!ip); - if (port->port.count) { - spin_unlock_irqrestore(&port->port.lock, flags); + card = ip->card; + if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - } - port->port.flags |= ASYNC_CLOSING; - tty->closing = 1; - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->port.flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << port->channel); + if (port->flags & ASYNC_INITIALIZED) { + card->port_status &= ~(1 << ip->channel); outw(card->port_status, card->base + 0x02); } - isicom_shutdown_port(port); + isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); isicom_flush_buffer(tty); - tty_ldisc_flush(tty); - - spin_lock_irqsave(&port->port.lock, flags); - tty->closing = 0; - - if (port->port.blocked_open) { - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->port.close_delay) { - pr_dbg("scheduling until time out.\n"); - msleep_interruptible( - jiffies_to_msecs(port->port.close_delay)); - } - spin_lock_irqsave(&port->port.lock, flags); - wake_up_interruptible(&port->port.open_wait); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - spin_unlock_irqrestore(&port->port.lock, flags); + + tty_port_close_end(port, tty); } /* write et all */ diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 4c69ab97339..5c3dc6b8411 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -767,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) break; } if (i == ARRAY_SIZE(stli_brdstr)) { - printk("STALLION: unknown board name, %s?\n", argp[0]); + printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]); return 0; } @@ -855,21 +855,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) return; port = &portp->port; - spin_lock_irqsave(&port->lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); - return; - } - if (tty->count == 1 && port->count != 1) - port->count = 1; - if (port->count-- > 1) { - spin_unlock_irqrestore(&port->lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - port->flags |= ASYNC_CLOSING; - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); /* * May want to wait for data to drain before closing. The BUSY flag @@ -882,6 +869,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) stli_flushchars(tty); spin_unlock_irqrestore(&stli_lock, flags); + /* We end up doing this twice for the moment. This needs looking at + eventually. Note we still use portp->closing_wait as a result */ if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, portp->closing_wait); @@ -905,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp) set_bit(ST_DOFLUSHRX, &portp->state); stli_flushbuffer(tty); - tty->closing = 0; - tty_port_tty_set(&portp->port, NULL); - - if (port->blocked_open) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&port->open_wait); - } - - port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } /*****************************************************************************/ @@ -1482,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s sio.irq = 0; sio.flags = portp->port.flags; sio.baud_base = portp->baud_base; - sio.close_delay = portp->close_delay; + sio.close_delay = portp->port.close_delay; sio.closing_wait = portp->closing_wait; sio.custom_divisor = portp->custom_divisor; sio.xmit_fifo_size = 0; @@ -1514,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s return -EFAULT; if (!capable(CAP_SYS_ADMIN)) { if ((sio.baud_base != portp->baud_base) || - (sio.close_delay != portp->close_delay) || + (sio.close_delay != portp->port.close_delay) || ((sio.flags & ~ASYNC_USR_MASK) != (portp->port.flags & ~ASYNC_USR_MASK))) return -EPERM; @@ -1523,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) | (sio.flags & ASYNC_USR_MASK); portp->baud_base = sio.baud_base; - portp->close_delay = sio.close_delay; + portp->port.close_delay = sio.close_delay; portp->closing_wait = sio.closing_wait; portp->custom_divisor = sio.custom_divisor; @@ -2065,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne unsigned char __iomem *bits; if (test_bit(ST_CMDING, &portp->state)) { - printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n", + printk(KERN_ERR "istallion: command already busy, cmd=%x!\n", (int) cmd); return; } @@ -2625,7 +2605,7 @@ static int stli_initports(struct stlibrd *brdp) for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) { portp = kzalloc(sizeof(struct stliport), GFP_KERNEL); if (!portp) { - printk("STALLION: failed to allocate port structure\n"); + printk(KERN_WARNING "istallion: failed to allocate port structure\n"); continue; } tty_port_init(&portp->port); @@ -2635,7 +2615,7 @@ static int stli_initports(struct stlibrd *brdp) portp->brdnr = brdp->brdnr; portp->panelnr = panelnr; portp->baud_base = STL_BAUDBASE; - portp->close_delay = STL_CLOSEDELAY; + portp->port.close_delay = STL_CLOSEDELAY; portp->closing_wait = 30 * HZ; init_waitqueue_head(&portp->port.open_wait); init_waitqueue_head(&portp->port.close_wait); @@ -2692,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2766,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2818,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2863,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), board=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2928,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse void __iomem *ptr; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -2994,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs unsigned char val; if (offset > brdp->memsize) { - printk(KERN_ERR "STALLION: shared memory pointer=%x out of " + printk(KERN_ERR "istallion: shared memory pointer=%x out of " "range at line=%d(%d), brd=%d\n", (int) offset, line, __LINE__, brdp->brdnr); ptr = NULL; @@ -3433,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp) #endif if (nrdevs < (brdp->nrports + 1)) { - printk(KERN_ERR "STALLION: slave failed to allocate memory for " + printk(KERN_ERR "istallion: slave failed to allocate memory for " "all devices, devices=%d\n", nrdevs); brdp->nrports = nrdevs - 1; } @@ -3443,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp) brdp->bitsize = (nrdevs + 7) / 8; memoff = readl(&hdrp->memp); if (memoff > brdp->memsize) { - printk(KERN_ERR "STALLION: corrupted shared memory region?\n"); + printk(KERN_ERR "istallion: corrupted shared memory region?\n"); rc = -EIO; goto stli_donestartup; } memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff); if (readw(&memp->dtype) != TYP_ASYNCTRL) { - printk(KERN_ERR "STALLION: no slave control device found\n"); + printk(KERN_ERR "istallion: no slave control device found\n"); goto stli_donestartup; } memp++; @@ -3534,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) retval = stli_initonb(brdp); break; default: - printk(KERN_ERR "STALLION: board=%d is unknown board " + printk(KERN_ERR "istallion: board=%d is unknown board " "type=%d\n", brdp->brdnr, brdp->brdtype); retval = -ENODEV; } @@ -3543,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp) return retval; stli_initports(brdp); - printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x " + printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x " "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype], brdp->brdnr, brdp->iobase, (int) brdp->memaddr, brdp->nrpanels, brdp->nrports); @@ -3637,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp) if (! foundit) { brdp->memaddr = 0; brdp->membase = NULL; - printk(KERN_ERR "STALLION: failed to probe shared memory " + printk(KERN_ERR "istallion: failed to probe shared memory " "region for %s in EISA slot=%d\n", stli_brdnames[brdp->brdtype], (brdp->iobase >> 12)); return -ENODEV; @@ -3782,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev, mutex_lock(&stli_brdslock); brdnr = stli_getbrdnr(); if (brdnr < 0) { - printk(KERN_INFO "STALLION: too many boards found, " + printk(KERN_INFO "istallion: too many boards found, " "maximum supported %d\n", STL_MAXBRDS); mutex_unlock(&stli_brdslock); retval = -EIO; @@ -3854,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void) brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL); if (!brdp) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%Zd)\n", sizeof(struct stlibrd)); return NULL; } @@ -4493,7 +4473,7 @@ static int __init istallion_module_init(void) stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL); if (!stli_txcookbuf) { - printk(KERN_ERR "STALLION: failed to allocate memory " + printk(KERN_ERR "istallion: failed to allocate memory " "(size=%d)\n", STLI_TXBUFSIZE); retval = -ENOMEM; goto err; @@ -4518,7 +4498,7 @@ static int __init istallion_module_init(void) retval = tty_register_driver(stli_serial); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial driver\n"); + printk(KERN_ERR "istallion: failed to register serial driver\n"); goto err_ttyput; } @@ -4532,7 +4512,7 @@ static int __init istallion_module_init(void) */ retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem); if (retval) { - printk(KERN_ERR "STALLION: failed to register serial memory " + printk(KERN_ERR "istallion: failed to register serial memory " "device\n"); goto err_deinit; } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 08ba6eb1a38..402c9f217f8 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1080,58 +1080,27 @@ static void mxser_flush_buffer(struct tty_struct *tty) static void mxser_close(struct tty_struct *tty, struct file *filp) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; unsigned long timeout; - unsigned long flags; if (tty->index == MXSER_PORTS) return; if (!info) return; - spin_lock_irqsave(&info->port.lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&info->port.lock, flags); - return; - } - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->port.count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - spin_unlock_irqrestore(&info->port.lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - info->port.flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->port.lock, flags); + /* * Save the termios structure, since this port may have * separate termios for callout and dialin. + * + * FIXME: Can this go ? */ if (info->port.flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->port.closing_wait); - /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the @@ -1156,19 +1125,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) } } mxser_shutdown(tty); - mxser_flush_buffer(tty); - tty_ldisc_flush(tty); - - tty->closing = 0; - tty_port_tty_set(&info->port, NULL); - if (info->port.blocked_open) { - if (info->port.close_delay) - schedule_timeout_interruptible(info->port.close_delay); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index af34c2054a0..9ac5febd8ab 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -929,35 +929,11 @@ static void rc_close(struct tty_struct *tty, struct file *filp) if (!port || rc_paranoia_check(port, tty->name, "close")) return; - spin_lock_irqsave(&port->port.lock, flags); - - if (tty_hung_up_p(filp)) - goto out; - bp = port_Board(port); - if ((tty->count == 1) && (port->port.count != 1)) { - printk(KERN_INFO "rc%d: rc_close: bad port count;" - " tty->count is 1, port count is %d\n", - board_No(bp), port->port.count); - port->port.count = 1; - } - if (--port->port.count < 0) { - printk(KERN_INFO "rc%d: rc_close: bad port count " - "for tty%d: %d\n", - board_No(bp), port_No(port), port->port.count); - port->port.count = 0; - } - if (port->port.count) - goto out; - port->port.flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, port->port.closing_wait); + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the @@ -989,23 +965,8 @@ static void rc_close(struct tty_struct *tty, struct file *filp) rc_shutdown_port(tty, bp, port); rc_flush_buffer(tty); spin_unlock_irqrestore(&riscom_lock, flags); - tty_ldisc_flush(tty); - spin_lock_irqsave(&port->port.lock, flags); - tty->closing = 0; - port->port.tty = NULL; - if (port->port.blocked_open) { - spin_unlock_irqrestore(&port->port.lock, flags); - if (port->port.close_delay) - msleep_interruptible(jiffies_to_msecs(port->port.close_delay)); - wake_up_interruptible(&port->port.open_wait); - spin_lock_irqsave(&port->port.lock, flags); - } - port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->port.close_wait); - -out: - spin_unlock_irqrestore(&riscom_lock, flags); + tty_port_close_end(&port->port, tty); } static int rc_write(struct tty_struct *tty, diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 77eef61c46f..e1e0dd89ac9 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -833,40 +833,20 @@ static void stl_close(struct tty_struct *tty, struct file *filp) pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); portp = tty->driver_data; - if (portp == NULL) - return; + BUG_ON(portp == NULL); + port = &portp->port; - spin_lock_irqsave(&port->lock, flags); - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - if (tty->count == 1 && port->count != 1) - port->count = 1; - if (port->count-- > 1) { - spin_unlock_irqrestore(&port->lock, flags); - return; - } - - port->count = 0; - port->flags |= ASYNC_CLOSING; - /* * May want to wait for any data to drain before closing. The BUSY * flag keeps track of whether we are still sending or not - it is * very accurate for the cd1400, not quite so for the sc26198. * (The sc26198 has no "end-of-data" interrupt only empty FIFO) */ - tty->closing = 1; - - spin_unlock_irqrestore(&port->lock, flags); - - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); stl_waituntilsent(tty, (HZ / 2)); - spin_lock_irqsave(&port->lock, flags); portp->port.flags &= ~ASYNC_INITIALIZED; spin_unlock_irqrestore(&port->lock, flags); @@ -883,20 +863,9 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - tty->closing = 0; + tty_port_close_end(port, tty); tty_port_tty_set(port, NULL); - - if (port->blocked_open) { - if (portp->close_delay) - msleep_interruptible(jiffies_to_msecs(portp->close_delay)); - wake_up_interruptible(&portp->port.open_wait); - } - - portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); } /*****************************************************************************/ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 0ded4ed3da3..fbd5a5ce2e1 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -3104,70 +3104,18 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - - if (!info->port.count) - return; - if (tty_hung_up_p(filp)) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("mgsl_close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) - goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) mgsl_wait_until_sent(tty, info->timeout); - mgsl_flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - - tty->closing = 0; + + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 625c9bde3be..53544e21f19 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -720,44 +720,9 @@ static void close(struct tty_struct *tty, struct file *filp) return; DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count)); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - DBGERR(("%s close: bad refcount; tty->count=1, " - "info->port.count=%d\n", info->device_name, info->port.count)); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) - goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - DBGINFO(("%s call tty_wait_until_sent\n", info->device_name)); - tty_wait_until_sent(tty, info->port.closing_wait); - } - if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); @@ -765,20 +730,8 @@ static void close(struct tty_struct *tty, struct file *filp) shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count)); } diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 1f5c21ec4b1..2aac55bcf5f 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -810,70 +810,18 @@ static void close(struct tty_struct *tty, struct file *filp) printk("%s(%d):%s close() entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->port.count); - if (!info->port.count) - return; - - if (tty_hung_up_p(filp)) - goto cleanup; - - if ((tty->count == 1) && (info->port.count != 1)) { - /* - * tty->count is 1 and the tty structure will be freed. - * info->port.count should be one in this case. - * if it's not, correct it so that the port is shutdown. - */ - printk("%s(%d):%s close: bad refcount; tty->count is 1, " - "info->port.count is %d\n", - __FILE__,__LINE__, info->device_name, info->port.count); - info->port.count = 1; - } - - info->port.count--; - - /* if at least one open remaining, leave hardware active */ - if (info->port.count) + if (tty_port_close_start(&info->port, tty, filp) == 0) goto cleanup; - - info->port.flags |= ASYNC_CLOSING; - - /* set tty->closing to notify line discipline to - * only process XON/XOFF characters. Only the N_TTY - * discipline appears to use this (ppp does not). - */ - tty->closing = 1; - - /* wait for transmit data to clear all layers */ - - if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) { - if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):%s close() calling tty_wait_until_sent\n", - __FILE__,__LINE__, info->device_name ); - tty_wait_until_sent(tty, info->port.closing_wait); - } - + if (info->port.flags & ASYNC_INITIALIZED) wait_until_sent(tty, info->timeout); flush_buffer(tty); - tty_ldisc_flush(tty); - shutdown(info); - tty->closing = 0; + tty_port_close_end(&info->port, tty); info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->port.close_delay) { - msleep_interruptible(jiffies_to_msecs(info->port.close_delay)); - } - wake_up_interruptible(&info->port.open_wait); - } - - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - - wake_up_interruptible(&info->port.close_wait); - cleanup: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__, diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 0723664fe0a..b3175f54fe0 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -257,3 +257,61 @@ int tty_port_block_til_ready(struct tty_port *port, } EXPORT_SYMBOL(tty_port_block_til_ready); +int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + + if( tty->count == 1 && port->count != 1) { + printk(KERN_WARNING + "tty_port_close_start: tty->count = 1 port count = %d.\n", + port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_WARNING "tty_port_close_start: count = %d\n", + port->count); + port->count = 0; + } + + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + port->flags |= ASYNC_CLOSING; + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, port->closing_wait); + return 1; +} +EXPORT_SYMBOL(tty_port_close_start); + +void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) +{ + unsigned long flags; + + tty_ldisc_flush(tty); + + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) { + msleep_interruptible( + jiffies_to_msecs(port->close_delay)); + } + spin_lock_irqsave(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + } + port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + wake_up_interruptible(&port->close_wait); + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL(tty_port_close_end); diff --git a/include/linux/istallion.h b/include/linux/istallion.h index 053d5aea925..7faca98c7d1 100644 --- a/include/linux/istallion.h +++ b/include/linux/istallion.h @@ -59,7 +59,6 @@ struct stliport { unsigned int devnr; int baud_base; int custom_divisor; - int close_delay; int closing_wait; int rc; int argsize; diff --git a/include/linux/tty.h b/include/linux/tty.h index 61a0ab32cf1..fc39db95499 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -441,6 +441,9 @@ extern void tty_port_raise_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); +extern int tty_port_close_start(struct tty_port *port, + struct tty_struct *tty, struct file *filp); +extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); |