diff options
| -rw-r--r-- | drivers/hwmon/w83627ehf.c | 59 |
1 files changed, 56 insertions, 3 deletions
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 0dcaba9b718..e01a3e97aa1 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -277,6 +277,11 @@ struct w83627ehf_data { struct device *hwmon_dev; struct mutex lock; + const u8 *REG_FAN_START_OUTPUT; + const u8 *REG_FAN_STOP_OUTPUT; + const u8 *REG_FAN_MAX_OUTPUT; + const u8 *REG_FAN_STEP_OUTPUT; + struct mutex update_lock; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ @@ -524,7 +529,10 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } } - for (i = 0; i < 4; i++) { + for (i = 0; i < data->pwm_num; i++) { + if (!(data->has_fan & (1 << i))) + continue; + /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i != 1) { pwmcfg = w83627ehf_read_value(data, @@ -546,6 +554,17 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) W83627EHF_REG_FAN_STOP_OUTPUT[i]); data->fan_stop_time[i] = w83627ehf_read_value(data, W83627EHF_REG_FAN_STOP_TIME[i]); + + if (data->REG_FAN_MAX_OUTPUT[i] != 0xff) + data->fan_max_output[i] = + w83627ehf_read_value(data, + data->REG_FAN_MAX_OUTPUT[i]); + + if (data->REG_FAN_STEP_OUTPUT[i] != 0xff) + data->fan_step_output[i] = + w83627ehf_read_value(data, + data->REG_FAN_STEP_OUTPUT[i]); + data->target_temp[i] = w83627ehf_read_value(data, W83627EHF_REG_TARGET[i]) & @@ -1126,7 +1145,7 @@ store_##reg(struct device *dev, struct device_attribute *attr, \ u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \ mutex_lock(&data->update_lock); \ data->reg[nr] = val; \ - w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \ + w83627ehf_write_value(data, data->REG_##REG[nr], val); \ mutex_unlock(&data->update_lock); \ return count; \ } @@ -1206,12 +1225,26 @@ static struct sensor_device_attribute sda_sf3_arrays[] = { store_fan_stop_output, 1), SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output, store_fan_stop_output, 2), +}; - /* pwm1 and pwm3 don't support max and step settings */ + +/* + * pwm1 and pwm3 don't support max and step settings on all chips. + * Need to check support while generating/removing attribute files. + */ +static struct sensor_device_attribute sda_sf3_max_step_arrays[] = { + SENSOR_ATTR(pwm1_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, + store_fan_max_output, 0), + SENSOR_ATTR(pwm1_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, + store_fan_step_output, 0), SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, store_fan_max_output, 1), SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, store_fan_step_output, 1), + SENSOR_ATTR(pwm3_max_output, S_IWUSR | S_IRUGO, show_fan_max_output, + store_fan_max_output, 2), + SENSOR_ATTR(pwm3_step_output, S_IWUSR | S_IRUGO, show_fan_step_output, + store_fan_step_output, 2), }; static ssize_t @@ -1235,6 +1268,12 @@ static void w83627ehf_device_remove_files(struct device *dev) for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) device_remove_file(dev, &sda_sf3_arrays[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) { + struct sensor_device_attribute *attr = + &sda_sf3_max_step_arrays[i]; + if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) + device_remove_file(dev, &attr->dev_attr); + } for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); for (i = 0; i < data->in_num; i++) { @@ -1352,6 +1391,11 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) data->in6_skip = !data->temp3_disable; } + data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT; + data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT; + data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT; + data->REG_FAN_STEP_OUTPUT = W83627EHF_REG_FAN_STEP_OUTPUT; + /* Initialize the chip */ w83627ehf_init_device(data); @@ -1440,6 +1484,15 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) &sda_sf3_arrays[i].dev_attr))) goto exit_remove; + for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) { + struct sensor_device_attribute *attr = + &sda_sf3_max_step_arrays[i]; + if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) { + err = device_create_file(dev, &attr->dev_attr); + if (err) + goto exit_remove; + } + } /* if fan4 is enabled create the sf3 files for it */ if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4) for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) { |