diff options
| -rw-r--r-- | drivers/net/e1000/e1000.h | 1 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 31 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_main.c | 10 |
3 files changed, 41 insertions, 1 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 658f36ad8b4..a18782748d5 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -242,6 +242,7 @@ struct e1000_adapter { uint32_t rx_buffer_len; uint32_t part_num; uint32_t wol; + uint32_t ksp3_port_a; uint32_t smartspeed; uint32_t en_mng_pt; uint16_t link_speed; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index f7e81e96a19..f1b9cf4643c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1632,10 +1632,26 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82546EB_QUAD_COPPER: case E1000_DEV_ID_82545EM_FIBER: case E1000_DEV_ID_82545EM_COPPER: + case E1000_DEV_ID_82546GB_QUAD_COPPER: wol->supported = 0; wol->wolopts = 0; return; + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* device id 10B5 port-A supports wol */ + if (!adapter->ksp3_port_a) { + wol->supported = 0; + return; + } + /* KSP3 does not suppport UCAST wake-ups for any interface */ + wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + + if (adapter->wol & E1000_WUFC_EX) + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + wol->wolopts = 0; + goto do_defaults; + case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: @@ -1650,8 +1666,9 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) default: wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; - wol->wolopts = 0; + +do_defaults: if (adapter->wol & E1000_WUFC_EX) wol->wolopts |= WAKE_UCAST; if (adapter->wol & E1000_WUFC_MC) @@ -1676,10 +1693,22 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) case E1000_DEV_ID_82543GC_COPPER: case E1000_DEV_ID_82544EI_FIBER: case E1000_DEV_ID_82546EB_QUAD_COPPER: + case E1000_DEV_ID_82546GB_QUAD_COPPER: case E1000_DEV_ID_82545EM_FIBER: case E1000_DEV_ID_82545EM_COPPER: return wol->wolopts ? -EOPNOTSUPP : 0; + case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: + /* device id 10B5 port-A supports wol */ + if (!adapter->ksp3_port_a) + return wol->wolopts ? -EOPNOTSUPP : 0; + + if (wol->wolopts & WAKE_UCAST) { + DPRINTK(DRV, ERR, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + return -EOPNOTSUPP; + } + case E1000_DEV_ID_82546EB_FIBER: case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82571EB_FIBER: diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a525c95266f..aad5373a8ae 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -651,6 +651,7 @@ e1000_probe(struct pci_dev *pdev, unsigned long mmio_start, mmio_len; static int cards_found = 0; + static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */ int i, err, pci_using_dac; uint16_t eeprom_data; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; @@ -743,6 +744,15 @@ e1000_probe(struct pci_dev *pdev, if ((err = e1000_check_phy_reset_block(&adapter->hw))) DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); + /* if ksp3, indicate if it's port a being setup */ + if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && + e1000_ksp3_port_a == 0) + adapter->ksp3_port_a = 1; + e1000_ksp3_port_a++; + /* Reset for multiple KP3 adapters */ + if (e1000_ksp3_port_a == 4) + e1000_ksp3_port_a = 0; + if (adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | |