diff options
| -rw-r--r-- | drivers/leds/leds-lp5523.c | 1065 | ||||
| -rw-r--r-- | include/linux/leds-lp5523.h | 47 |
2 files changed, 1112 insertions, 0 deletions
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c new file mode 100644 index 00000000000..1e11fcc08b2 --- /dev/null +++ b/drivers/leds/leds-lp5523.c @@ -0,0 +1,1065 @@ +/* + * lp5523.c - LP5523 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/leds-lp5523.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#define LP5523_REG_ENABLE 0x00 +#define LP5523_REG_OP_MODE 0x01 +#define LP5523_REG_RATIOMETRIC_MSB 0x02 +#define LP5523_REG_RATIOMETRIC_LSB 0x03 +#define LP5523_REG_ENABLE_LEDS_MSB 0x04 +#define LP5523_REG_ENABLE_LEDS_LSB 0x05 +#define LP5523_REG_LED_CNTRL_BASE 0x06 +#define LP5523_REG_LED_PWM_BASE 0x16 +#define LP5523_REG_LED_CURRENT_BASE 0x26 +#define LP5523_REG_CONFIG 0x36 +#define LP5523_REG_CHANNEL1_PC 0x37 +#define LP5523_REG_CHANNEL2_PC 0x38 +#define LP5523_REG_CHANNEL3_PC 0x39 +#define LP5523_REG_STATUS 0x3a +#define LP5523_REG_GPO 0x3b +#define LP5523_REG_VARIABLE 0x3c +#define LP5523_REG_RESET 0x3d +#define LP5523_REG_TEMP_CTRL 0x3e +#define LP5523_REG_TEMP_READ 0x3f +#define LP5523_REG_TEMP_WRITE 0x40 +#define LP5523_REG_LED_TEST_CTRL 0x41 +#define LP5523_REG_LED_TEST_ADC 0x42 +#define LP5523_REG_ENG1_VARIABLE 0x45 +#define LP5523_REG_ENG2_VARIABLE 0x46 +#define LP5523_REG_ENG3_VARIABLE 0x47 +#define LP5523_REG_MASTER_FADER1 0x48 +#define LP5523_REG_MASTER_FADER2 0x49 +#define LP5523_REG_MASTER_FADER3 0x4a +#define LP5523_REG_CH1_PROG_START 0x4c +#define LP5523_REG_CH2_PROG_START 0x4d +#define LP5523_REG_CH3_PROG_START 0x4e +#define LP5523_REG_PROG_PAGE_SEL 0x4f +#define LP5523_REG_PROG_MEM 0x50 + +#define LP5523_CMD_LOAD 0x15 /* 00010101 */ +#define LP5523_CMD_RUN 0x2a /* 00101010 */ +#define LP5523_CMD_DISABLED 0x00 /* 00000000 */ + +#define LP5523_ENABLE 0x40 +#define LP5523_AUTO_INC 0x40 +#define LP5523_PWR_SAVE 0x20 +#define LP5523_PWM_PWR_SAVE 0x04 +#define LP5523_CP_1 0x08 +#define LP5523_CP_1_5 0x10 +#define LP5523_CP_AUTO 0x18 +#define LP5523_INT_CLK 0x01 +#define LP5523_AUTO_CLK 0x02 +#define LP5523_EN_LEDTEST 0x80 +#define LP5523_LEDTEST_DONE 0x80 + +#define LP5523_DEFAULT_CURRENT 50 /* microAmps */ +#define LP5523_PROGRAM_LENGTH 32 /* in bytes */ +#define LP5523_PROGRAM_PAGES 6 +#define LP5523_ADC_SHORTCIRC_LIM 80 + +#define LP5523_LEDS 9 +#define LP5523_ENGINES 3 + +#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */ + +#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING + +#define LP5523_EXT_CLK_USED 0x08 + +#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) +#define SHIFT_MASK(id) (((id) - 1) * 2) + +struct lp5523_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 mux_page; + u16 led_mux; + u8 engine_mask; +}; + +struct lp5523_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5523_chip { + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5523_engine engines[LP5523_ENGINES]; + struct lp5523_led leds[LP5523_LEDS]; + struct lp5523_platform_data *pdata; + u8 num_channels; + u8 num_leds; +}; + +#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev) + +static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) +{ + return container_of(engine, struct lp5523_chip, + engines[engine->id - 1]); +} + +static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) +{ + return container_of(led, struct lp5523_chip, + leds[led->id]); +} + +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern); + +static void lp5523_led_brightness_work(struct work_struct *work); + +static int lp5523_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5523_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40); + if (ret) + return ret; + ret = lp5523_read(client, LP5523_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf == 0x40) + return 0; + else + return -ENODEV; +} + +static int lp5523_configure(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int ret = 0; + u8 status; + + /* one pattern per engine setting led mux start and stop addresses */ + u8 pattern[][LP5523_PROGRAM_LENGTH] = { + { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, + }; + + lp5523_write(client, LP5523_REG_RESET, 0xff); + + usleep_range(10000, 100000); + + ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); + /* Chip startup time after reset is 500 us */ + usleep_range(1000, 10000); + + ret |= lp5523_write(client, LP5523_REG_CONFIG, + LP5523_AUTO_INC | LP5523_PWR_SAVE | + LP5523_CP_AUTO | LP5523_AUTO_CLK | + LP5523_PWM_PWR_SAVE); + + /* turn on all leds */ + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff); + + /* hardcode 32 bytes of memory for each engine from program memory */ + ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00); + ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10); + ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20); + + /* write led mux address space for each channel */ + ret |= lp5523_load_program(&chip->engines[0], pattern[0]); + ret |= lp5523_load_program(&chip->engines[1], pattern[1]); + ret |= lp5523_load_program(&chip->engines[2], pattern[2]); + + if (ret) { + dev_err(&client->dev, "could not load mux programs\n"); + return -1; + } + + /* set all engines exec state and mode to run 00101010 */ + ret |= lp5523_write(client, LP5523_REG_ENABLE, + (LP5523_CMD_RUN | LP5523_ENABLE)); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN); + + if (ret) { + dev_err(&client->dev, "could not start mux programs\n"); + return -1; + } + + /* Wait 3ms and check the engine status */ + usleep_range(3000, 20000); + lp5523_read(client, LP5523_REG_STATUS, &status); + status &= LP5523_ENG_STATUS_MASK; + + if (status == LP5523_ENG_STATUS_MASK) { + dev_dbg(&client->dev, "all engines configured\n"); + } else { + dev_info(&client->dev, "status == %x\n", status); + dev_err(&client->dev, "cound not configure LED engine\n"); + return -1; + } + + dev_info(&client->dev, "disabling engines\n"); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED); + + return ret; +} + +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state); + if (ret) + goto fail; + + engine_state &= ~(engine->engine_mask); + + /* set mode only for this engine */ + mode &= engine->engine_mask; + + engine_state |= mode; + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state); +fail: + return ret; +} + +static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM, + (u8)(mux >> 8)); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux)); + engine->led_mux = mux; + + return ret; +} + +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, + engine->prog_page); + ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM, + LP5523_PROGRAM_LENGTH, pattern); + + return ret; +} + +static int lp5523_run_program(struct lp5523_engine *engine) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + + ret = lp5523_write(client, LP5523_REG_ENABLE, + LP5523_CMD_RUN | LP5523_ENABLE); + if (ret) + goto fail; + + ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN); +fail: + return ret; +} + +static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) +{ + int i; + u16 tmp_mux = 0; + len = len < LP5523_LEDS ? len : LP5523_LEDS; + for (i = 0; i < len; i++) { + switch (buf[i]) { + case '1': + tmp_mux |= (1 << i); + break; + case '0': + break; + case '\n': + i = len; + break; + default: + return -1; + } + } + *mux = tmp_mux; + + return 0; +} + +static void lp5523_mux_to_array(u16 led_mux, char *array) +{ + int i, pos = 0; + for (i = 0; i < LP5523_LEDS; i++) + pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); + + array[pos] = '\0'; +} + +/*--------------------------------------------------------------*/ +/* Sysfs interface */ +/*--------------------------------------------------------------*/ + +static ssize_t show_engine_leds(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + char mux[LP5523_LEDS + 1]; + + lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); + + return sprintf(buf, "%s\n", mux); +} + +#define show_leds(nr) \ +static ssize_t show_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_leds(dev, attr, buf, nr); \ +} +show_leds(1) +show_leds(2) +show_leds(3) + +static ssize_t store_engine_leds(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + u16 mux = 0; + + if (lp5523_mux_parse(buf, &mux, len)) + return -EINVAL; + + if (lp5523_load_mux(&chip->engines[nr - 1], mux)) + return -EINVAL; + + return len; +} + +#define store_leds(nr) \ +static ssize_t store_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_leds(dev, attr, buf, len, nr); \ +} +store_leds(1) +store_leds(2) +store_leds(3) + +static ssize_t lp5523_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i, ret, pos = 0; + int led = 0; + u8 status, adc, vdd; + + mutex_lock(&chip->lock); + + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + /* Check that ext clock is really in use if requested */ + if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT)) + if ((status & LP5523_EXT_CLK_USED) == 0) + goto fail; + + /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ + lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | 16); + usleep_range(3000, 10000); + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 10000); + + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd); + vdd--; /* There may be some fluctuation in measurement */ + + for (i = 0; i < LP5523_LEDS; i++) { + /* Skip non-existing channels */ + if (chip->pdata->led_config[i].led_current == 0) + continue; + + /* Set default current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->pdata->led_config[i].led_current); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff); + /* let current stabilize 2ms before measurements start */ + usleep_range(2000, 10000); + lp5523_write(chip->client, + LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | i); + /* ledtest takes 2.7ms */ + usleep_range(3000, 10000); + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 10000); + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc); + + if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) + pos += sprintf(buf + pos, "LED %d FAIL\n", i); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00); + + /* Restore current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->leds[led].led_current); + led++; + } + if (pos == 0) + pos = sprintf(buf, "OK\n"); + goto release_lock; +fail: + pos = sprintf(buf, "FAIL\n"); + +release_lock: + mutex_unlock(&chip->lock); + + return pos; +} + +static void lp5523_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5523_led *led = cdev_to_led(cdev); + + led->brightness = (u8)brightness; + + schedule_work(&led->brightness_work); +} + +static void lp5523_led_brightness_work(struct work_struct *work) +{ + struct lp5523_led *led = container_of(work, + struct lp5523_led, + brightness_work); + struct lp5523_chip *chip = led_to_lp5523(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + + lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + + mutex_unlock(&chip->lock); +} + +static int lp5523_do_store_load(struct lp5523_engine *engine, + const char *buf, size_t len) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + + ret = lp5523_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + return lp5523_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5523_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5523_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5523_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct lp5523_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5523_set_mode(engine, LP5523_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5523_set_mode(engine, LP5523_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5523_set_mode(engine, LP5523_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + struct lp5523_chip *chip = led_to_lp5523(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + (u8)curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5523_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5523_led_attribute_group = { + .attrs = lp5523_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO, + show_engine1_leds, store_engine1_leds); +static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO, + show_engine2_leds, store_engine2_leds); +static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO, + show_engine3_leds, store_engine3_leds); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL); + +static struct attribute *lp5523_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5523_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + &dev_attr_engine1_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + &dev_attr_engine2_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + &dev_attr_engine3_leds.attr, + NULL +}; + +static const struct attribute_group lp5523_group = { + .attrs = lp5523_attributes, +}; + +static const struct attribute_group lp5523_engine_group[] = { + {.attrs = lp5523_engine1_attributes }, + {.attrs = lp5523_engine2_attributes }, + {.attrs = lp5523_engine3_attributes }, +}; + +static int lp5523_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int ret; + + ret = sysfs_create_group(&dev->kobj, &lp5523_group); + if (ret < 0) + return ret; + + return 0; +} + +static void lp5523_unregister_sysfs(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5523_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) + if (chip->engines[i].mode == LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]); + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5523_led_attribute_group); +} + +/*--------------------------------------------------------------*/ +/* Set chip operating mode */ +/*--------------------------------------------------------------*/ +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode) +{ + /* engine to chip */ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5523_CMD_RUN) + return 0; + + if (mode == LP5523_CMD_RUN) { + ret = lp5523_run_program(engine); + } else if (mode == LP5523_CMD_LOAD) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5523_CMD_DISABLED) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +/*--------------------------------------------------------------*/ +/* Probe, Attach, Remove */ +/*--------------------------------------------------------------*/ +static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) +{ + if (id < 1 || id > LP5523_ENGINES) + return -1; + engine->id = id; + engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id); + engine->prog_page = id - 1; + engine->mux_page = id + 2; + engine->attributes = &lp5523_engine_group[id - 1]; + + return 0; +} + +static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, + int chan, struct lp5523_platform_data *pdata) +{ + char name[32]; + int res; + + if (chan >= LP5523_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current) { + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5523_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5523_LEDS - 1); + return -EINVAL; + } + + snprintf(name, 32, "lp5523:channel%d", chan); + + led->cdev.name = name; + led->cdev.brightness_set = lp5523_set_brightness; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", + chan); + return res; + } + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5523_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + } else { + led->led_current = 0; + } + return 0; +} + +static struct i2c_driver lp5523_driver; + +static int lp5523_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5523_chip *chip; + struct lp5523_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 10000); + pdata->enable(1); + usleep_range(1000, 10000); /* Spec says min 500us */ + } + + ret = lp5523_detect(client); + if (ret) + goto fail2; + + dev_info(&client->dev, "LP5523 Programmable led chip found\n"); + + /* Initialize engines */ + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + ret = lp5523_init_engine(&chip->engines[i], i + 1); + if (ret) { + dev_err(&client->dev, "error initializing engine\n"); + goto fail2; + } + } + ret = lp5523_configure(client); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set LED current */ + lp5523_write(client, + LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5523_led_brightness_work); + + led++; + } + + ret = lp5523_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5523_remove(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i; + + lp5523_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5523_id[] = { + { "lp5523", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, lp5523_id); + +static struct i2c_driver lp5523_driver = { + .driver = { + .name = "lp5523", + }, + .probe = lp5523_probe, + .remove = lp5523_remove, + .id_table = lp5523_id, +}; + +static int __init lp5523_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5523_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5523 driver failed\n"); + + return ret; +} + +static void __exit lp5523_exit(void) +{ + i2c_del_driver(&lp5523_driver); +} + +module_init(lp5523_init); +module_exit(lp5523_exit); + +MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>"); +MODULE_DESCRIPTION("LP5523 LED engine"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h new file mode 100644 index 00000000000..796747637b8 --- /dev/null +++ b/include/linux/leds-lp5523.h @@ -0,0 +1,47 @@ +/* + * LP5523 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_LP5523_H +#define __LINUX_LP5523_H + +/* See Documentation/leds/leds-lp5523.txt */ + +struct lp5523_led_config { + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +#define LP5523_CLOCK_AUTO 0 +#define LP5523_CLOCK_INT 1 +#define LP5523_CLOCK_EXT 2 + +struct lp5523_platform_data { + struct lp5523_led_config *led_config; + u8 num_channels; + u8 clock_mode; + int (*setup_resources)(void); + void (*release_resources)(void); + void (*enable)(bool state); +}; + +#endif /* __LINUX_LP5523_H */ |