diff options
-rw-r--r-- | drivers/ide/Kconfig | 11 | ||||
-rw-r--r-- | drivers/ide/arm/ide_arm.c | 4 | ||||
-rw-r--r-- | drivers/ide/cris/ide-cris.c | 9 | ||||
-rw-r--r-- | drivers/ide/h8300/ide-h8300.c | 6 | ||||
-rw-r--r-- | drivers/ide/ide-pnp.c | 4 | ||||
-rw-r--r-- | drivers/ide/ide.c | 4 | ||||
-rw-r--r-- | drivers/ide/legacy/buddha.c | 10 | ||||
-rw-r--r-- | drivers/ide/legacy/falconide.c | 3 | ||||
-rw-r--r-- | drivers/ide/legacy/gayle.c | 5 | ||||
-rw-r--r-- | drivers/ide/legacy/macide.c | 3 | ||||
-rw-r--r-- | drivers/ide/legacy/q40ide.c | 5 | ||||
-rw-r--r-- | drivers/ide/pci/cmd640.c | 8 | ||||
-rw-r--r-- | drivers/ide/ppc/mpc8xx.c | 14 |
13 files changed, 70 insertions, 16 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 2a584b3f181..7c419e87a4a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -327,7 +327,6 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 bool "CMD640 chipset bugfix/support" depends on X86 - select IDE_GENERIC ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or @@ -362,7 +361,6 @@ config BLK_DEV_CMD640_ENHANCED config BLK_DEV_IDEPNP bool "PNP EIDE support" depends on PNP - select IDE_GENERIC help If you have a PnP (Plug and Play) compatible EIDE card and would like the kernel to automatically detect and activate @@ -845,7 +843,6 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ config IDE_ARM def_bool ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) - select IDE_GENERIC config BLK_DEV_IDE_ICSIDE tristate "ICS IDE interface support" @@ -880,7 +877,6 @@ config ETRAX_IDE bool "ETRAX IDE support" depends on CRIS && BROKEN select BLK_DEV_IDEDMA - select IDE_GENERIC help Enables the ETRAX IDE driver. @@ -914,7 +910,6 @@ endchoice config IDE_H8300 bool "H8300 IDE support" depends on H8300 - select IDE_GENERIC default y help Enables the H8300 IDE driver. @@ -922,7 +917,6 @@ config IDE_H8300 config BLK_DEV_GAYLE bool "Amiga Gayle IDE interface support" depends on AMIGA - select IDE_GENERIC help This is the IDE driver for the Amiga Gayle IDE interface. It supports both the `A1200 style' and `A4000 style' of the Gayle IDE interface, @@ -954,7 +948,6 @@ config BLK_DEV_IDEDOUBLER config BLK_DEV_BUDDHA bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)" depends on ZORRO && EXPERIMENTAL - select IDE_GENERIC help This is the IDE driver for the IDE interfaces on the Buddha, Catweasel and X-Surf expansion boards. It supports up to two interfaces @@ -967,7 +960,6 @@ config BLK_DEV_BUDDHA config BLK_DEV_FALCON_IDE bool "Falcon IDE interface support" depends on ATARI - select IDE_GENERIC help This is the IDE driver for the builtin IDE interface on the Atari Falcon. Say Y if you have a Falcon and want to use IDE devices (hard @@ -977,7 +969,6 @@ config BLK_DEV_FALCON_IDE config BLK_DEV_MAC_IDE bool "Macintosh Quadra/Powerbook IDE interface support" depends on MAC - select IDE_GENERIC help This is the IDE driver for the builtin IDE interface on some m68k Macintosh models. It supports both the `Quadra style' (used in @@ -991,7 +982,6 @@ config BLK_DEV_MAC_IDE config BLK_DEV_Q40IDE bool "Q40/Q60 IDE interface support" depends on Q40 - select IDE_GENERIC help Enable the on-board IDE controller in the Q40/Q60. This should normally be on; disable it only if you are running a custom hard @@ -1000,7 +990,6 @@ config BLK_DEV_Q40IDE config BLK_DEV_MPC8xx_IDE bool "MPC8xx IDE support" depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - select IDE_GENERIC help This option provides support for IDE on Motorola MPC8xx Systems. Please see 'Type of MPC8xx IDE interface' for details. diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 21ba6ac2f82..a1b5ddab6a4 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -28,6 +28,7 @@ void __init ide_arm_init(void) { ide_hwif_t *hwif; hw_regs_t hw; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); @@ -36,5 +37,8 @@ void __init ide_arm_init(void) hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { ide_init_port_hw(hwif, &hw); + idx[0] = hwif->index; + + ide_device_add(idx); } } diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 7e33e2b42e9..92453629703 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -758,9 +758,8 @@ void __init init_e100_ide (void) { hw_regs_t hw; - int ide_offsets[IDE_NR_PORTS]; - int h; - int i; + int ide_offsets[IDE_NR_PORTS], h, i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; printk("ide: ETRAX FS built-in ATA DMA controller\n"); @@ -808,6 +807,8 @@ init_e100_ide (void) hwif->drives[1].autotune = 1; hwif->ultra_mask = cris_ultra_mask; hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ + + idx[h] = hwif->index; } /* Reset pulse */ @@ -820,6 +821,8 @@ init_e100_ide (void) cris_ide_set_speed(TYPE_PIO, ATA_PIO4_SETUP, ATA_PIO4_STROBE, ATA_PIO4_HOLD); cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD); cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); + + ide_device_add(idx); } static cris_dma_descr_type mydescr __attribute__ ((__aligned__(16))); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 57d0d4ce858..9fa78e98d1b 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -89,6 +89,7 @@ void __init h8300_ide_init(void) hw_regs_t hw; ide_hwif_t *hwif; int index; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) goto out_busy; @@ -111,6 +112,11 @@ void __init h8300_ide_init(void) ide_init_port_hw(hwif, &hw); hwif_setup(hwif); printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); + + idx[0] = index; + + ide_device_add(idx); + return; out_busy: diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 664bc489c55..802efd4d976 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -43,12 +43,16 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev,hwif); + + ide_device_add(idx); + return 0; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 77af743425e..6f99f5c9006 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1555,6 +1555,7 @@ done: extern void __init pnpide_init(void); extern void __exit pnpide_exit(void); extern void __init h8300_ide_init(void); +extern void __init mpc8xx_ide_probe(void); /* * probe_for_hwifs() finds/initializes "known" IDE interfaces @@ -1619,6 +1620,9 @@ static void __init probe_for_hwifs (void) #ifdef CONFIG_H8300 h8300_ide_init(); #endif +#ifdef BLK_DEV_MPC8xx_IDE + mpc8xx_ide_probe(); +#endif } /* diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 8b9cb39c961..ba64c4b9f91 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -156,6 +156,8 @@ void __init buddha_init(void) while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { unsigned long board; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { buddha_num_hwifs = BUDDHA_NUM_HWIFS; type=BOARD_BUDDHA; @@ -233,8 +235,12 @@ fail_base2: printk("X-Surf"); break; } - printk(" IDE interface\n"); - } + printk(" IDE interface\n"); + + idx[i] = index; + } } + + ide_device_add(idx); } } diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index b861cfe2590..c1a84540beb 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -75,10 +75,13 @@ void __init falconide_init(void) hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); printk("ide%d: Falcon IDE interface\n", index); + + ide_device_add(idx); } } diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index 705d0b8a3f5..ec53dc9b483 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -113,6 +113,7 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif) void __init gayle_init(void) { int a4000, i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_AMIGA) return; @@ -183,7 +184,11 @@ found: break; #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ } + + idx[i] = index; } else release_mem_region(res_start, res_n); } + + ide_device_add(idx); } diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 1840fede521..c1b7881c280 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -112,6 +112,7 @@ void __init macide_init(void) hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { u8 index = hwif->index; + u8 idx[4] = { index, 0xff, 0xff, 0xff }; ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); @@ -135,5 +136,7 @@ void __init macide_init(void) printk(KERN_INFO "ide%d: Macintosh Powerbook Baboon IDE interface\n", index); else printk(KERN_INFO "ide%d: Unknown Macintosh IDE interface\n", index); + + ide_device_add(idx); } } diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 31e54ffdfee..2082e9c6efd 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -116,6 +116,7 @@ void __init q40ide_init(void) int i; ide_hwif_t *hwif; const char *name; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (!MACH_IS_Q40) return ; @@ -146,7 +147,11 @@ void __init q40ide_init(void) ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); hwif->mmio = 1; + + idx[i] = hwif->index; } } + + ide_device_add(idx); } diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 4aa48104e0c..5096e059ac5 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -717,6 +717,7 @@ int __init ide_probe_for_cmd640x (void) const char *bus_type, *port2; unsigned int index; u8 b, cfr; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; if (cmd640_vlb && probe_for_cmd640_vlb()) { bus_type = "VLB"; @@ -769,6 +770,8 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + idx[0] = cmd_hwif0->index; + /* * Ensure compatibility by always using the slowest timings * for access to the drive's command register block, @@ -826,6 +829,8 @@ int __init ide_probe_for_cmd640x (void) cmd_hwif1->pio_mask = ATA_PIO5; cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + + idx[1] = cmd_hwif1->index; } printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, cmd_hwif0->serialized ? "" : "not ", port2); @@ -872,6 +877,9 @@ int __init ide_probe_for_cmd640x (void) #ifdef CMD640_DUMP_REGS cmd640_dump_regs(); #endif + + ide_device_add(idx); + return 1; } diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 5f0da35ab5a..8172e813b03 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -838,3 +838,17 @@ void m8xx_ide_init(void) ppc_ide_md.default_io_base = m8xx_ide_default_io_base; ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports; } + +void __init mpc8xx_ide_probe(void) +{ + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + +#ifdef IDE0_BASE_OFFSET + idx[0] = 0; +#ifdef IDE1_BASE_OFFSET + idx[1] = 1; +#endif +#endif + + ide_device_add(idx); +} |