diff options
| -rw-r--r-- | drivers/serial/amba-pl010.c | 258 |
1 files changed, 134 insertions, 124 deletions
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index f69bd097166..ea49aafd66b 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -77,73 +77,77 @@ struct uart_amba_port { static void pl010_stop_tx(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(port->membase + UART010_CR); + cr = readb(uap->port.membase + UART010_CR); cr &= ~UART010_CR_TIE; - writel(cr, port->membase + UART010_CR); + writel(cr, uap->port.membase + UART010_CR); } static void pl010_start_tx(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(port->membase + UART010_CR); + cr = readb(uap->port.membase + UART010_CR); cr |= UART010_CR_TIE; - writel(cr, port->membase + UART010_CR); + writel(cr, uap->port.membase + UART010_CR); } static void pl010_stop_rx(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(port->membase + UART010_CR); + cr = readb(uap->port.membase + UART010_CR); cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, port->membase + UART010_CR); + writel(cr, uap->port.membase + UART010_CR); } static void pl010_enable_ms(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(port->membase + UART010_CR); + cr = readb(uap->port.membase + UART010_CR); cr |= UART010_CR_MSIE; - writel(cr, port->membase + UART010_CR); + writel(cr, uap->port.membase + UART010_CR); } -static void pl010_rx_chars(struct uart_port *port) +static void pl010_rx_chars(struct uart_amba_port *uap) { - struct tty_struct *tty = port->info->tty; + struct tty_struct *tty = uap->port.info->tty; unsigned int status, ch, flag, rsr, max_count = 256; - status = readb(port->membase + UART01x_FR); + status = readb(uap->port.membase + UART01x_FR); while (UART_RX_DATA(status) && max_count--) { - ch = readb(port->membase + UART01x_DR); + ch = readb(uap->port.membase + UART01x_DR); flag = TTY_NORMAL; - port->icount.rx++; + uap->port.icount.rx++; /* * Note that the error handling code is * out of the main execution path */ - rsr = readb(port->membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, port->membase + UART01x_ECR); + writel(0, uap->port.membase + UART01x_ECR); if (rsr & UART01x_RSR_BE) { rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); - port->icount.brk++; - if (uart_handle_break(port)) + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) goto ignore_char; } else if (rsr & UART01x_RSR_PE) - port->icount.parity++; + uap->port.icount.parity++; else if (rsr & UART01x_RSR_FE) - port->icount.frame++; + uap->port.icount.frame++; if (rsr & UART01x_RSR_OE) - port->icount.overrun++; + uap->port.icount.overrun++; - rsr &= port->read_status_mask; + rsr &= uap->port.read_status_mask; if (rsr & UART01x_RSR_BE) flag = TTY_BREAK; @@ -153,53 +157,52 @@ static void pl010_rx_chars(struct uart_port *port) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(port, ch)) + if (uart_handle_sysrq_char(&uap->port, ch)) goto ignore_char; - uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag); + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: - status = readb(port->membase + UART01x_FR); + status = readb(uap->port.membase + UART01x_FR); } tty_flip_buffer_push(tty); return; } -static void pl010_tx_chars(struct uart_port *port) +static void pl010_tx_chars(struct uart_amba_port *uap) { - struct circ_buf *xmit = &port->info->xmit; + struct circ_buf *xmit = &uap->port.info->xmit; int count; - if (port->x_char) { - writel(port->x_char, port->membase + UART01x_DR); - port->icount.tx++; - port->x_char = 0; + if (uap->port.x_char) { + writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; return; } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - pl010_stop_tx(port); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl010_stop_tx(&uap->port); return; } - count = port->fifosize >> 1; + count = uap->port.fifosize >> 1; do { - writel(xmit->buf[xmit->tail], port->membase + UART01x_DR); + writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; + uap->port.icount.tx++; if (uart_circ_empty(xmit)) break; } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); + uart_write_wakeup(&uap->port); if (uart_circ_empty(xmit)) - pl010_stop_tx(port); + pl010_stop_tx(&uap->port); } -static void pl010_modem_status(struct uart_port *port) +static void pl010_modem_status(struct uart_amba_port *uap) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int status, delta; writel(0, uap->port.membase + UART010_ICR); @@ -226,47 +229,50 @@ static void pl010_modem_status(struct uart_port *port) static irqreturn_t pl010_int(int irq, void *dev_id) { - struct uart_port *port = dev_id; + struct uart_amba_port *uap = dev_id; unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; int handled = 0; - spin_lock(&port->lock); + spin_lock(&uap->port.lock); - status = readb(port->membase + UART010_IIR); + status = readb(uap->port.membase + UART010_IIR); if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) - pl010_rx_chars(port); + pl010_rx_chars(uap); if (status & UART010_IIR_MIS) - pl010_modem_status(port); + pl010_modem_status(uap); if (status & UART010_IIR_TIS) - pl010_tx_chars(port); + pl010_tx_chars(uap); if (pass_counter-- == 0) break; - status = readb(port->membase + UART010_IIR); + status = readb(uap->port.membase + UART010_IIR); } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; } - spin_unlock(&port->lock); + spin_unlock(&uap->port.lock); return IRQ_RETVAL(handled); } static unsigned int pl010_tx_empty(struct uart_port *port) { - return readb(port->membase + UART01x_FR) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readb(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } static unsigned int pl010_get_mctrl(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int result = 0; unsigned int status; - status = readb(port->membase + UART01x_FR); + status = readb(uap->port.membase + UART01x_FR); if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) @@ -287,17 +293,18 @@ static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) static void pl010_break_ctl(struct uart_port *port, int break_state) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned long flags; unsigned int lcr_h; - spin_lock_irqsave(&port->lock, flags); - lcr_h = readb(port->membase + UART010_LCRH); + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readb(uap->port.membase + UART010_LCRH); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writel(lcr_h, port->membase + UART010_LCRH); - spin_unlock_irqrestore(&port->lock, flags); + writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); } static int pl010_startup(struct uart_port *port) @@ -308,46 +315,49 @@ static int pl010_startup(struct uart_port *port) /* * Allocate the IRQ */ - retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", port); + retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); if (retval) return retval; /* * initialise the old status of the modem signals */ - uap->old_status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; /* * Finally, enable interrupts */ writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, - port->membase + UART010_CR); + uap->port.membase + UART010_CR); return 0; } static void pl010_shutdown(struct uart_port *port) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; + /* * Free the interrupt */ - free_irq(port->irq, port); + free_irq(uap->port.irq, uap); /* * disable all interrupts, disable the port */ - writel(0, port->membase + UART010_CR); + writel(0, uap->port.membase + UART010_CR); /* disable break condition and fifos */ - writel(readb(port->membase + UART010_LCRH) & + writel(readb(uap->port.membase + UART010_LCRH) & ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - port->membase + UART010_LCRH); + uap->port.membase + UART010_LCRH); } static void pl010_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int lcr_h, old_cr; unsigned long flags; unsigned int baud, quot; @@ -355,7 +365,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { @@ -379,66 +389,66 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios, if (!(termios->c_cflag & PARODD)) lcr_h |= UART01x_LCRH_EPS; } - if (port->fifosize > 1) + if (uap->port.fifosize > 1) lcr_h |= UART01x_LCRH_FEN; - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&uap->port.lock, flags); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); - port->read_status_mask = UART01x_RSR_OE; + uap->port.read_status_mask = UART01x_RSR_OE; if (termios->c_iflag & INPCK) - port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART01x_RSR_BE; + uap->port.read_status_mask |= UART01x_RSR_BE; /* * Characters to ignore */ - port->ignore_status_mask = 0; + uap->port.ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART01x_RSR_BE; + uap->port.ignore_status_mask |= UART01x_RSR_BE; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_OE; + uap->port.ignore_status_mask |= UART01x_RSR_OE; } /* * Ignore all characters if CREAD is not set. */ if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_RSR_RX; + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ - old_cr = readb(port->membase + UART010_CR) & ~UART010_CR_MSIE; + old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; - writel(0, port->membase + UART010_CR); + writel(0, uap->port.membase + UART010_CR); /* Set baud rate */ quot -= 1; - writel((quot & 0xf00) >> 8, port->membase + UART010_LCRM); - writel(quot & 0xff, port->membase + UART010_LCRL); + writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); + writel(quot & 0xff, uap->port.membase + UART010_LCRL); /* * ----------v----------v----------v----------v----- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L * ----------^----------^----------^----------^----- */ - writel(lcr_h, port->membase + UART010_LCRH); - writel(old_cr, port->membase + UART010_CR); + writel(lcr_h, uap->port.membase + UART010_LCRH); + writel(old_cr, uap->port.membase + UART010_CR); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&uap->port.lock, flags); } static const char *pl010_type(struct uart_port *port) @@ -514,47 +524,48 @@ static struct uart_amba_port *amba_ports[UART_NR]; static void pl010_console_putchar(struct uart_port *port, int ch) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int status; do { - status = readb(port->membase + UART01x_FR); + status = readb(uap->port.membase + UART01x_FR); barrier(); } while (!UART_TX_READY(status)); - writel(ch, port->membase + UART01x_DR); + writel(ch, uap->port.membase + UART01x_DR); } static void pl010_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_port *port = &amba_ports[co->index]->port; + struct uart_amba_port *uap = amba_ports[co->index]; unsigned int status, old_cr; /* * First save the CR then disable the interrupts */ - old_cr = readb(port->membase + UART010_CR); - writel(UART01x_CR_UARTEN, port->membase + UART010_CR); + old_cr = readb(uap->port.membase + UART010_CR); + writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - uart_console_write(port, s, count, pl010_console_putchar); + uart_console_write(&uap->port, s, count, pl010_console_putchar); /* * Finally, wait for transmitter to become empty * and restore the TCR */ do { - status = readb(port->membase + UART01x_FR); + status = readb(uap->port.membase + UART01x_FR); barrier(); } while (status & UART01x_FR_BUSY); - writel(old_cr, port->membase + UART010_CR); + writel(old_cr, uap->port.membase + UART010_CR); } static void __init -pl010_console_get_options(struct uart_port *port, int *baud, +pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (readb(port->membase + UART010_CR) & UART01x_CR_UARTEN) { + if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, quot; - lcr_h = readb(port->membase + UART010_LCRH); + lcr_h = readb(uap->port.membase + UART010_LCRH); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -569,14 +580,15 @@ pl010_console_get_options(struct uart_port *port, int *baud, else *bits = 8; - quot = readb(port->membase + UART010_LCRL) | readb(port->membase + UART010_LCRM) << 8; - *baud = port->uartclk / (16 * (quot + 1)); + quot = readb(uap->port.membase + UART010_LCRL) | + readb(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); } } static int __init pl010_console_setup(struct console *co, char *options) { - struct uart_port *port; + struct uart_amba_port *uap; int baud = 38400; int bits = 8; int parity = 'n'; @@ -589,16 +601,16 @@ static int __init pl010_console_setup(struct console *co, char *options) */ if (co->index >= UART_NR) co->index = 0; - if (!amba_ports[co->index]) + uap = amba_ports[co->index]; + if (!uap) return -ENODEV; - port = &amba_ports[co->index]->port; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - pl010_console_get_options(port, &baud, &parity, &bits); + pl010_console_get_options(uap, &baud, &parity, &bits); - return uart_set_options(port, co, baud, parity, bits, flow); + return uart_set_options(&uap->port, co, baud, parity, bits, flow); } static struct uart_driver amba_reg; @@ -629,7 +641,7 @@ static struct uart_driver amba_reg = { static int pl010_probe(struct amba_device *dev, void *id) { - struct uart_amba_port *port; + struct uart_amba_port *uap; void __iomem *base; int i, ret; @@ -642,8 +654,8 @@ static int pl010_probe(struct amba_device *dev, void *id) goto out; } - port = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); - if (!port) { + uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (!uap) { ret = -ENOMEM; goto out; } @@ -654,51 +666,49 @@ static int pl010_probe(struct amba_device *dev, void *id) goto free; } - port->port.dev = &dev->dev; - port->port.mapbase = dev->res.start; - port->port.membase = base; - port->port.iotype = UPIO_MEM; - port->port.irq = dev->irq[0]; - port->port.uartclk = 14745600; - port->port.fifosize = 16; - port->port.ops = &amba_pl010_pops; - port->port.flags = UPF_BOOT_AUTOCONF; - port->port.line = i; - port->dev = dev; - port->data = dev->dev.platform_data; - - amba_ports[i] = port; - - amba_set_drvdata(dev, port); - ret = uart_add_one_port(&amba_reg, &port->port); + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.uartclk = 14745600; + uap->port.fifosize = 16; + uap->port.ops = &amba_pl010_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + uap->dev = dev; + uap->data = dev->dev.platform_data; + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); if (ret) { amba_set_drvdata(dev, NULL); amba_ports[i] = NULL; iounmap(base); free: - kfree(port); + kfree(uap); } - out: return ret; } static int pl010_remove(struct amba_device *dev) { - struct uart_amba_port *port = amba_get_drvdata(dev); + struct uart_amba_port *uap = amba_get_drvdata(dev); int i; amba_set_drvdata(dev, NULL); - uart_remove_one_port(&amba_reg, &port->port); + uart_remove_one_port(&amba_reg, &uap->port); for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == port) + if (amba_ports[i] == uap) amba_ports[i] = NULL; - iounmap(port->port.membase); - kfree(port); - + iounmap(uap->port.membase); + kfree(uap); return 0; } |