diff options
| -rw-r--r-- | drivers/input/serio/i8042.c | 50 |
1 files changed, 49 insertions, 1 deletions
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index b53a015bf8a..8aaf8fcacf6 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -264,6 +264,49 @@ static int i8042_aux_write(struct serio *serio, unsigned char c) I8042_CMD_MUX_SEND + port->mux); } + +/* + * i8042_aux_close attempts to clear AUX or KBD port state by disabling + * and then re-enabling it. + */ + +static void i8042_port_close(struct serio *serio) +{ + int irq_bit; + int disable_bit; + const char *port_name; + + if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) { + irq_bit = I8042_CTR_AUXINT; + disable_bit = I8042_CTR_AUXDIS; + port_name = "AUX"; + } else { + irq_bit = I8042_CTR_KBDINT; + disable_bit = I8042_CTR_KBDDIS; + port_name = "KBD"; + } + + i8042_ctr &= ~irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING + "i8042.c: Can't write CTR while closing %s port.\n", + port_name); + + udelay(50); + + i8042_ctr &= ~disable_bit; + i8042_ctr |= irq_bit; + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n", + port_name); + + /* + * See if there is any data appeared while we were messing with + * port state. + */ + i8042_interrupt(0, NULL); +} + /* * i8042_start() is called by serio core when port is about to finish * registering. It will mark port as existing so i8042_interrupt can @@ -393,7 +436,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id) } /* - * i8042_enable_kbd_port enables keybaord port on chip + * i8042_enable_kbd_port enables keyboard port on chip */ static int i8042_enable_kbd_port(void) @@ -841,6 +884,9 @@ static void i8042_controller_reset(void) i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); + if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n"); + /* * Disable MUX mode if present. */ @@ -1026,6 +1072,7 @@ static int __devinit i8042_create_kbd_port(void) serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; serio->start = i8042_start; serio->stop = i8042_stop; + serio->close = i8042_port_close; serio->port_data = port; serio->dev.parent = &i8042_platform_device->dev; strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name)); @@ -1056,6 +1103,7 @@ static int __devinit i8042_create_aux_port(int idx) if (idx < 0) { strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name)); strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + serio->close = i8042_port_close; } else { snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); |