diff options
| -rw-r--r-- | drivers/net/Kconfig | 38 | ||||
| -rw-r--r-- | net/core/sock.c | 13 | ||||
| -rw-r--r-- | net/core/utils.c | 37 | ||||
| -rw-r--r-- | net/ipv4/Kconfig | 2 | ||||
| -rw-r--r-- | net/ipv4/Makefile | 2 | ||||
| -rw-r--r-- | net/ipv4/netfilter/ip_conntrack_core.c | 2 | ||||
| -rw-r--r-- | net/ipv4/utils.c | 59 |
7 files changed, 64 insertions, 89 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 534b598866b..8a835eb5880 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -23,9 +23,12 @@ config NETDEVICES If unsure, say Y. +# All the following symbols are dependent on NETDEVICES - do not repeat +# that for each of the symbols. +if NETDEVICES + config DUMMY tristate "Dummy net driver support" - depends on NETDEVICES ---help--- This is essentially a bit-bucket device (i.e. traffic you send to this device is consigned into oblivion) with a configurable IP @@ -45,7 +48,6 @@ config DUMMY config BONDING tristate "Bonding driver support" - depends on NETDEVICES depends on INET ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet @@ -63,7 +65,6 @@ config BONDING config EQUALIZER tristate "EQL (serial line load balancing) support" - depends on NETDEVICES ---help--- If you have two serial connections to some other computer (this usually requires two modems and two telephone lines) and you use @@ -83,7 +84,6 @@ config EQUALIZER config TUN tristate "Universal TUN/TAP device driver support" - depends on NETDEVICES select CRC32 ---help--- TUN/TAP provides packet reception and transmission for user space @@ -107,7 +107,7 @@ config TUN config NET_SB1000 tristate "General Instruments Surfboard 1000" - depends on NETDEVICES && PNP + depends on PNP ---help--- This is a driver for the General Instrument (also known as NextLevel) SURFboard 1000 internal @@ -129,16 +129,14 @@ config NET_SB1000 If you don't have this card, of course say N. -if NETDEVICES source "drivers/net/arcnet/Kconfig" -endif # # Ethernet # menu "Ethernet (10 or 100Mbit)" - depends on NETDEVICES && !UML + depends on !UML config NET_ETHERNET bool "Ethernet (10 or 100Mbit)" @@ -1137,7 +1135,7 @@ config IBMLANA config IBMVETH tristate "IBM LAN Virtual Ethernet support" - depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES + depends on NET_ETHERNET && PPC_PSERIES ---help--- This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -1760,7 +1758,7 @@ endmenu # menu "Ethernet (1000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config ACENIC tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" @@ -2091,7 +2089,7 @@ endmenu # menu "Ethernet (10000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig" config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" - depends on NETDEVICES && PPC_ISERIES + depends on PPC_ISERIES config FDDI bool "FDDI driver support" - depends on NETDEVICES && (PCI || EISA) + depends on (PCI || EISA) help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can @@ -2239,7 +2237,7 @@ config SKFP config HIPPI bool "HIPPI driver support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL && INET && PCI + depends on EXPERIMENTAL && INET && PCI help HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI @@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS config PLIP tristate "PLIP (parallel port) support" - depends on NETDEVICES && PARPORT + depends on PARPORT ---help--- PLIP (Parallel Line Internet Protocol) is used to create a reasonably fast mini network consisting of two (or, rarely, more) @@ -2307,7 +2305,6 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" - depends on NETDEVICES ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2443,7 +2440,6 @@ config PPPOATM config SLIP tristate "SLIP (serial line) support" - depends on NETDEVICES ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some @@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6 config NET_FC bool "Fibre Channel driver support" - depends on NETDEVICES && SCSI && PCI + depends on SCSI && PCI help Fibre Channel is a high speed serial protocol mainly used to connect large storage devices to the computer; it is compatible with and @@ -2523,7 +2519,7 @@ config NET_FC config SHAPER tristate "Traffic Shaper (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to limit the rate of outgoing data flow over some other network device. @@ -2544,11 +2540,13 @@ config SHAPER config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" - depends on NETDEVICES && INET && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. +endif #NETDEVICES + config NETPOLL def_bool NETCONSOLE diff --git a/net/core/sock.c b/net/core/sock.c index 8b35ccdc2b3..12f6d9a2a52 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -206,13 +206,14 @@ int sock_setsockopt(struct socket *sock, int level, int optname, */ #ifdef SO_DONTLINGER /* Compatibility item... */ - switch (optname) { - case SO_DONTLINGER: - sock_reset_flag(sk, SOCK_LINGER); - return 0; + if (optname == SO_DONTLINGER) { + lock_sock(sk); + sock_reset_flag(sk, SOCK_LINGER); + release_sock(sk); + return 0; } -#endif - +#endif + if(optlen<sizeof(int)) return(-EINVAL); diff --git a/net/core/utils.c b/net/core/utils.c index e11a8654f36..88eb8b68e26 100644 --- a/net/core/utils.c +++ b/net/core/utils.c @@ -23,10 +23,10 @@ #include <linux/percpu.h> #include <linux/init.h> +#include <asm/byteorder.h> #include <asm/system.h> #include <asm/uaccess.h> - /* This is a maximally equidistributed combined Tausworthe generator based on code from GNU Scientific Library 1.5 (30 Jun 2004) @@ -153,3 +153,38 @@ int net_ratelimit(void) EXPORT_SYMBOL(net_random); EXPORT_SYMBOL(net_ratelimit); EXPORT_SYMBOL(net_srandom); + +/* + * Convert an ASCII string to binary IP. + * This is outside of net/ipv4/ because various code that uses IP addresses + * is otherwise not dependent on the TCP/IP stack. + */ + +__u32 in_aton(const char *str) +{ + unsigned long l; + unsigned int val; + int i; + + l = 0; + for (i = 0; i < 4; i++) + { + l <<= 8; + if (*str != '\0') + { + val = 0; + while (*str != '\0' && *str != '.') + { + val *= 10; + val += *str - '0'; + str++; + } + l |= val; + if (*str != '\0') + str++; + } + } + return(htonl(l)); +} + +EXPORT_SYMBOL(in_aton); diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index fc561c0ae8e..0b3d9f1d806 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -124,7 +124,7 @@ config IP_ROUTE_MULTIPATH config IP_ROUTE_MULTIPATH_CACHED bool "IP: equal cost multipath with caching support (EXPERIMENTAL)" - depends on: IP_ROUTE_MULTIPATH + depends on IP_ROUTE_MULTIPATH help Normally, equal cost multipath routing is not supported by the routing cache. If you say Y here, alternative routes are cached diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile index 5718cdb3a61..55dc6cca1e7 100644 --- a/net/ipv4/Makefile +++ b/net/ipv4/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux TCP/IP (INET) layer. # -obj-y := utils.o route.o inetpeer.o protocol.o \ +obj-y := route.o inetpeer.o protocol.o \ ip_input.o ip_fragment.o ip_forward.o ip_options.o \ ip_output.o ip_sockglue.o \ tcp.o tcp_input.o tcp_output.o tcp_timer.o tcp_ipv4.o \ diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c index 63bf8826498..86f04e41dd8 100644 --- a/net/ipv4/netfilter/ip_conntrack_core.c +++ b/net/ipv4/netfilter/ip_conntrack_core.c @@ -510,7 +510,7 @@ init_conntrack(const struct ip_conntrack_tuple *tuple, /* Welcome, Mr. Bond. We've been expecting you... */ __set_bit(IPS_EXPECTED_BIT, &conntrack->status); conntrack->master = exp->master; -#if CONFIG_IP_NF_CONNTRACK_MARK +#ifdef CONFIG_IP_NF_CONNTRACK_MARK conntrack->mark = exp->master->mark; #endif nf_conntrack_get(&conntrack->master->ct_general); diff --git a/net/ipv4/utils.c b/net/ipv4/utils.c deleted file mode 100644 index 6aecd7a4353..00000000000 --- a/net/ipv4/utils.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Various kernel-resident INET utility functions; mainly - * for format conversion and debugging output. - * - * Version: $Id: utils.c,v 1.8 2000/10/03 07:29:01 anton Exp $ - * - * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> - * - * Fixes: - * Alan Cox : verify_area check. - * Alan Cox : removed old debugging. - * Andi Kleen : add net_ratelimit() - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <asm/byteorder.h> - -/* - * Convert an ASCII string to binary IP. - */ - -__u32 in_aton(const char *str) -{ - unsigned long l; - unsigned int val; - int i; - - l = 0; - for (i = 0; i < 4; i++) - { - l <<= 8; - if (*str != '\0') - { - val = 0; - while (*str != '\0' && *str != '.') - { - val *= 10; - val += *str - '0'; - str++; - } - l |= val; - if (*str != '\0') - str++; - } - } - return(htonl(l)); -} - -EXPORT_SYMBOL(in_aton); |