diff options
| -rw-r--r-- | drivers/usb/dwc3/core.c | 13 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 107 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-exynos.c | 1 | ||||
| -rw-r--r-- | drivers/usb/dwc3/ep0.c | 146 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 363 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.h | 6 |
6 files changed, 407 insertions, 229 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 1040bdb8dc8..c34452a7304 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -148,6 +148,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + mdelay(100); + /* After PHYs are stable we can take Core out of reset state */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; @@ -255,7 +257,7 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) * * Returns 0 on success otherwise negative errno. */ -static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc) +static int dwc3_event_buffers_setup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; int n; @@ -266,6 +268,8 @@ static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc) evt->buf, (unsigned long long) evt->dma, evt->length); + evt->lpos = 0; + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), lower_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), @@ -285,6 +289,9 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) for (n = 0; n < dwc->num_event_buffers; n++) { evt = dwc->ev_buffs[n]; + + evt->lpos = 0; + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); @@ -328,8 +335,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) } dwc->revision = reg; - dwc3_core_soft_reset(dwc); - /* issue device SoftReset too */ timeout = jiffies + msecs_to_jiffies(500); dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); @@ -347,6 +352,8 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) cpu_relax(); } while (true); + dwc3_core_soft_reset(dwc); + dwc3_cache_hwparams(dwc); reg = dwc3_readl(dwc->regs, DWC3_GCTL); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f69c877add0..151eca876df 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -67,6 +67,7 @@ #define DWC3_DEVICE_EVENT_CONNECT_DONE 2 #define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3 #define DWC3_DEVICE_EVENT_WAKEUP 4 +#define DWC3_DEVICE_EVENT_HIBER_REQ 5 #define DWC3_DEVICE_EVENT_EOPF 6 #define DWC3_DEVICE_EVENT_SOF 7 #define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9 @@ -171,28 +172,36 @@ #define DWC3_GCTL_PRTCAP_DEVICE 2 #define DWC3_GCTL_PRTCAP_OTG 3 -#define DWC3_GCTL_CORESOFTRESET (1 << 11) -#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) -#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) -#define DWC3_GCTL_DISSCRAMBLE (1 << 3) -#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) +#define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) +#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) +#define DWC3_GCTL_DISSCRAMBLE (1 << 3) +#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) +#define DWC3_GCTL_DSBLCLKGTNG (1 << 0) /* Global USB2 PHY Configuration Register */ -#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) -#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) +#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) /* Global USB3 PIPE Control Register */ -#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) -#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) +#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) +#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) /* Global TX Fifo Size Register */ -#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) -#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) +#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) +#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) /* Global HWPARAMS1 Register */ #define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24) #define DWC3_GHWPARAMS1_EN_PWROPT_NO 0 #define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 +#define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2 +#define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24) +#define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3) + +/* Global HWPARAMS4 Register */ +#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13) +#define DWC3_MAX_HIBER_SCRATCHBUFS 15 /* Device Configuration Register */ #define DWC3_DCFG_LPM_CAP (1 << 22) @@ -206,24 +215,32 @@ #define DWC3_DCFG_LOWSPEED (2 << 0) #define DWC3_DCFG_FULLSPEED1 (3 << 0) +#define DWC3_DCFG_LPM_CAP (1 << 22) + /* Device Control Register */ #define DWC3_DCTL_RUN_STOP (1 << 31) #define DWC3_DCTL_CSFTRST (1 << 30) #define DWC3_DCTL_LSFTRST (1 << 29) #define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24) -#define DWC3_DCTL_HIRD_THRES(n) (((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24) +#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24) #define DWC3_DCTL_APPL1RES (1 << 23) -#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17) -#define DWC3_DCTL_TRGTULST(n) ((n) << 17) - -#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2)) -#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3)) -#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4)) -#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5)) -#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) +/* These apply for core versions 1.87a and earlier */ +#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17) +#define DWC3_DCTL_TRGTULST(n) ((n) << 17) +#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2)) +#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3)) +#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4)) +#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5)) +#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) + +/* These apply for core versions 1.94a and later */ +#define DWC3_DCTL_KEEP_CONNECT (1 << 19) +#define DWC3_DCTL_L1_HIBER_EN (1 << 18) +#define DWC3_DCTL_CRS (1 << 17) +#define DWC3_DCTL_CSS (1 << 16) #define DWC3_DCTL_INITU2ENA (1 << 12) #define DWC3_DCTL_ACCEPTU2ENA (1 << 11) @@ -249,6 +266,7 @@ #define DWC3_DEVTEN_ERRTICERREN (1 << 9) #define DWC3_DEVTEN_SOFEN (1 << 7) #define DWC3_DEVTEN_EOPFEN (1 << 6) +#define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5) #define DWC3_DEVTEN_WKUPEVTEN (1 << 4) #define DWC3_DEVTEN_ULSTCNGEN (1 << 3) #define DWC3_DEVTEN_CONNECTDONEEN (1 << 2) @@ -256,7 +274,15 @@ #define DWC3_DEVTEN_DISCONNEVTEN (1 << 0) /* Device Status Register */ +#define DWC3_DSTS_DCNRD (1 << 29) + +/* This applies for core versions 1.87a and earlier */ #define DWC3_DSTS_PWRUPREQ (1 << 24) + +/* These apply for core versions 1.94a and later */ +#define DWC3_DSTS_RSS (1 << 25) +#define DWC3_DSTS_SSS (1 << 24) + #define DWC3_DSTS_COREIDLE (1 << 23) #define DWC3_DSTS_DEVCTRLHLT (1 << 22) @@ -265,7 +291,7 @@ #define DWC3_DSTS_RXFIFOEMPTY (1 << 17) -#define DWC3_DSTS_SOFFN_MASK (0x3ff << 3) +#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3) #define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3) #define DWC3_DSTS_CONNECTSPD (7 << 0) @@ -280,6 +306,11 @@ #define DWC3_DGCMD_SET_LMP 0x01 #define DWC3_DGCMD_SET_PERIODIC_PAR 0x02 #define DWC3_DGCMD_XMIT_FUNCTION 0x03 + +/* These apply for core versions 1.94a and later */ +#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04 +#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05 + #define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09 #define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c @@ -287,6 +318,15 @@ #define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1) #define DWC3_DGCMD_CMDACT (1 << 10) +#define DWC3_DGCMD_CMDIOC (1 << 8) + +/* Device Generic Command Parameter Register */ +#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0) +#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0) +#define DWC3_DGCMDPAR_RX_FIFO (0 << 5) +#define DWC3_DGCMDPAR_TX_FIFO (1 << 5) +#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0) +#define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0) /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 @@ -303,7 +343,10 @@ #define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0) #define DWC3_DEPCMD_CLEARSTALL (0x05 << 0) #define DWC3_DEPCMD_SETSTALL (0x04 << 0) +/* This applies for core versions 1.90a and earlier */ #define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0) +/* This applies for core versions 1.94a and later */ +#define DWC3_DEPCMD_GETEPSTATE (0x03 << 0) #define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0) #define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0) @@ -361,7 +404,8 @@ struct dwc3_event_buffer { * @current_trb: index of current used trb * @number: endpoint number (1 - 15) * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK - * @res_trans_idx: Resource transfer index + * @resource_index: Resource transfer index + * @current_uf: Current uf received through last event parameter * @interval: the intervall on which the ISOC transfer is started * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX @@ -385,6 +429,7 @@ struct dwc3_ep { #define DWC3_EP_WEDGE (1 << 2) #define DWC3_EP_BUSY (1 << 4) #define DWC3_EP_PENDING_REQUEST (1 << 5) +#define DWC3_EP_MISSED_ISOC (1 << 6) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN (1 << 31) @@ -393,7 +438,8 @@ struct dwc3_ep { u8 number; u8 type; - u8 res_trans_idx; + u8 resource_index; + u16 current_uf; u32 interval; char name[20]; @@ -437,6 +483,8 @@ enum dwc3_link_state { DWC3_LINK_STATE_HRESET = 0x09, DWC3_LINK_STATE_CMPLY = 0x0a, DWC3_LINK_STATE_LPBK = 0x0b, + DWC3_LINK_STATE_RESET = 0x0e, + DWC3_LINK_STATE_RESUME = 0x0f, DWC3_LINK_STATE_MASK = 0x0f, }; @@ -450,11 +498,12 @@ enum dwc3_device_state { #define DWC3_TRB_SIZE_MASK (0x00ffffff) #define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK) #define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24) -#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28) >> 28)) +#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28) #define DWC3_TRBSTS_OK 0 #define DWC3_TRBSTS_MISSED_ISOC 1 #define DWC3_TRBSTS_SETUP_PENDING 2 +#define DWC3_TRB_STS_XFER_IN_PROG 4 /* TRB Control */ #define DWC3_TRB_CTRL_HWO (1 << 0) @@ -543,6 +592,14 @@ struct dwc3_request { unsigned queued:1; }; +/* + * struct dwc3_scratchpad_array - hibernation scratchpad array + * (format defined by hw) + */ +struct dwc3_scratchpad_array { + __le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS]; +}; + /** * struct dwc3 - representation of our controller * @ctrl_req: usb control request which is used for ep0 @@ -624,8 +681,10 @@ struct dwc3 { #define DWC3_REVISION_180A 0x5533180a #define DWC3_REVISION_183A 0x5533183a #define DWC3_REVISION_185A 0x5533185a +#define DWC3_REVISION_187A 0x5533187a #define DWC3_REVISION_188A 0x5533188a #define DWC3_REVISION_190A 0x5533190a +#define DWC3_REVISION_194A 0x5533194a #define DWC3_REVISION_200A 0x5533200a #define DWC3_REVISION_202A 0x5533202a #define DWC3_REVISION_210A 0x5533210a diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index d1903019808..b8f00389fa3 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -18,7 +18,6 @@ #include <linux/platform_device.h> #include <linux/platform_data/dwc3-exynos.h> #include <linux/dma-mapping.h> -#include <linux/module.h> #include <linux/clk.h> #include "core.h" diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9e8a3dce69f..9b94886b66e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -54,7 +54,9 @@ #include "gadget.h" #include "io.h" -static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum); +static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep); +static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, + struct dwc3_ep *dep, struct dwc3_request *req); static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) { @@ -111,7 +113,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, } dep->flags |= DWC3_EP_BUSY; - dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc, dep->number); dwc->ep0_next_event = DWC3_EP0_COMPLETE; @@ -150,16 +152,15 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, return 0; } - ret = dwc3_ep0_start_trans(dwc, direction, - req->request.dma, req->request.length, - DWC3_TRBCTL_CONTROL_DATA); + __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req); + dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); } else if (dwc->delayed_status) { dwc->delayed_status = false; if (dwc->ep0state == EP0_STATUS_PHASE) - dwc3_ep0_do_control_status(dwc, 1); + __dwc3_ep0_do_control_status(dwc, dwc->eps[1]); else dev_dbg(dwc->dev, "too early for delayed status\n"); } @@ -224,6 +225,16 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) dwc3_ep0_out_start(dwc); } +int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + dwc3_ep0_stall_and_restart(dwc); + + return 0; +} + void dwc3_ep0_out_start(struct dwc3 *dwc) { int ret; @@ -463,6 +474,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { u32 cfg; int ret; + u32 reg; dwc->start_config_issued = false; cfg = le16_to_cpu(ctrl->wValue); @@ -477,6 +489,14 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) /* if the cfg matches and the cfg is non zero */ if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { dwc->dev_state = DWC3_CONFIGURED_STATE; + /* + * Enable transition to U1/U2 state when + * nothing is pending from application. + */ + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA); + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc->resize_fifos = true; dev_dbg(dwc->dev, "resize fifos flag SET\n"); } @@ -514,8 +534,8 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) dwc->u1sel = timing.u1sel; dwc->u1pel = timing.u1pel; - dwc->u2sel = timing.u2sel; - dwc->u2pel = timing.u2pel; + dwc->u2sel = le16_to_cpu(timing.u2sel); + dwc->u2pel = le16_to_cpu(timing.u2pel); reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (reg & DWC3_DCTL_INITU2ENA) @@ -640,11 +660,11 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { struct usb_ctrlrequest *ctrl = dwc->ctrl_req; - int ret; + int ret = -EINVAL; u32 len; if (!dwc->gadget_driver) - goto err; + goto out; len = le16_to_cpu(ctrl->wLength); if (!len) { @@ -665,11 +685,9 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, if (ret == USB_GADGET_DELAYED_STATUS) dwc->delayed_status = true; - if (ret >= 0) - return; - -err: - dwc3_ep0_stall_and_restart(dwc); +out: + if (ret < 0) + dwc3_ep0_stall_and_restart(dwc); } static void dwc3_ep0_complete_data(struct dwc3 *dwc, @@ -723,7 +741,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, } } -static void dwc3_ep0_complete_req(struct dwc3 *dwc, +static void dwc3_ep0_complete_status(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { struct dwc3_request *r; @@ -745,6 +763,7 @@ static void dwc3_ep0_complete_req(struct dwc3 *dwc, dev_dbg(dwc->dev, "Invalid Test #%d\n", dwc->test_mode_nr); dwc3_ep0_stall_and_restart(dwc); + return; } } @@ -758,7 +777,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; dep->flags &= ~DWC3_EP_BUSY; - dep->res_trans_idx = 0; + dep->resource_index = 0; dwc->setup_packet_pending = false; switch (dwc->ep0state) { @@ -774,7 +793,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, case EP0_STATUS_PHASE: dev_vdbg(dwc->dev, "Status Phase\n"); - dwc3_ep0_complete_req(dwc, event); + dwc3_ep0_complete_status(dwc, event); break; default: WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state); @@ -787,68 +806,81 @@ static void dwc3_ep0_do_control_setup(struct dwc3 *dwc, dwc3_ep0_out_start(dwc); } -static void dwc3_ep0_do_control_data(struct dwc3 *dwc, - const struct dwc3_event_depevt *event) +static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, + struct dwc3_ep *dep, struct dwc3_request *req) { - struct dwc3_ep *dep; - struct dwc3_request *req; int ret; - dep = dwc->eps[0]; - - if (list_empty(&dep->request_list)) { - dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n"); - dep->flags |= DWC3_EP_PENDING_REQUEST; - - if (event->endpoint_number) - dep->flags |= DWC3_EP0_DIR_IN; - return; - } - - req = next_request(&dep->request_list); - req->direction = !!event->endpoint_number; + req->direction = !!dep->number; if (req->request.length == 0) { - ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, + ret = dwc3_ep0_start_trans(dwc, dep->number, dwc->ctrl_req_addr, 0, DWC3_TRBCTL_CONTROL_DATA); - } else if ((req->request.length % dep->endpoint.maxpacket) - && (event->endpoint_number == 0)) { + } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) + && (dep->number == 0)) { + u32 transfer_size; + ret = usb_gadget_map_request(&dwc->gadget, &req->request, - event->endpoint_number); + dep->number); if (ret) { dev_dbg(dwc->dev, "failed to map request\n"); return; } - WARN_ON(req->request.length > dep->endpoint.maxpacket); + WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE); + + transfer_size = roundup(req->request.length, + (u32) dep->endpoint.maxpacket); dwc->ep0_bounced = true; /* - * REVISIT in case request length is bigger than EP0 - * wMaxPacketSize, we will need two chained TRBs to handle - * the transfer. + * REVISIT in case request length is bigger than + * DWC3_EP0_BOUNCE_SIZE we will need two chained + * TRBs to handle the transfer. */ - ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, - dwc->ep0_bounce_addr, dep->endpoint.maxpacket, + ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc->ep0_bounce_addr, transfer_size, DWC3_TRBCTL_CONTROL_DATA); } else { ret = usb_gadget_map_request(&dwc->gadget, &req->request, - event->endpoint_number); + dep->number); if (ret) { dev_dbg(dwc->dev, "failed to map request\n"); return; } - ret = dwc3_ep0_start_trans(dwc, event->endpoint_number, - req->request.dma, req->request.length, - DWC3_TRBCTL_CONTROL_DATA); + ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, + req->request.length, DWC3_TRBCTL_CONTROL_DATA); } WARN_ON(ret < 0); } +static void dwc3_ep0_do_control_data(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep; + struct dwc3_request *req; + + dep = dwc->eps[0]; + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n"); + dep->flags |= DWC3_EP_PENDING_REQUEST; + + if (event->endpoint_number) + dep->flags |= DWC3_EP0_DIR_IN; + return; + } + + req = next_request(&dep->request_list); + dep = dwc->eps[event->endpoint_number]; + + __dwc3_ep0_do_control_data(dwc, dep, req); +} + static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; @@ -861,10 +893,8 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) dwc->ctrl_req_addr, 0, type); } -static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum) +static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) { - struct dwc3_ep *dep = dwc->eps[epnum]; - if (dwc->resize_fifos) { dev_dbg(dwc->dev, "starting to resize fifos\n"); dwc3_gadget_resize_tx_fifos(dwc); @@ -874,13 +904,21 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum) WARN_ON(dwc3_ep0_start_control_status(dep)); } +static void dwc3_ep0_do_control_status(struct dwc3 *dwc, + const struct dwc3_event_depevt *event) +{ + struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; + + __dwc3_ep0_do_control_status(dwc, dep); +} + static void dwc3_ep0_xfernotready(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { dwc->setup_packet_pending = true; /* - * This part is very tricky: If we has just handled + * This part is very tricky: If we have just handled * XferNotReady(Setup) and we're now expecting a * XferComplete but, instead, we receive another * XferNotReady(Setup), we should STALL and restart @@ -974,7 +1012,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, return; } - dwc3_ep0_do_control_status(dwc, event->endpoint_number); + dwc3_ep0_do_control_status(dwc, event); } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4f3e8811dae..58fdfad96b4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -100,6 +100,23 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) int retries = 10000; u32 reg; + /* + * Wait until device controller is ready. Only applies to 1.94a and + * later RTL. + */ + if (dwc->revision >= DWC3_REVISION_194A) { + while (--retries) { + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (reg & DWC3_DSTS_DCNRD) + udelay(5); + else + break; + } + + if (retries <= 0) + return -ETIMEDOUT; + } + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; @@ -107,7 +124,15 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) reg |= DWC3_DCTL_ULSTCHNGREQ(state); dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* + * The following code is racy when called from dwc3_gadget_wakeup, + * and is not needed, at least on newer versions + */ + if (dwc->revision >= DWC3_REVISION_194A) + return 0; + /* wait for a change in DSTS */ + retries = 10000; while (--retries) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); @@ -265,8 +290,8 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd) return "Clear Stall"; case DWC3_DEPCMD_SETSTALL: return "Set Stall"; - case DWC3_DEPCMD_GETSEQNUMBER: - return "Get Data Sequence Number"; + case DWC3_DEPCMD_GETEPSTATE: + return "Get Endpoint State"; case DWC3_DEPCMD_SETTRANSFRESOURCE: return "Set Endpoint Transfer Resource"; case DWC3_DEPCMD_SETEPCONFIG: @@ -530,9 +555,37 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; - if (!list_empty(&dep->req_queued)) + if (!list_empty(&dep->req_queued)) { dwc3_stop_active_transfer(dwc, dep->number); + /* + * NOTICE: We are violating what the Databook says about the + * EndTransfer command. Ideally we would _always_ wait for the + * EndTransfer Command Completion IRQ, but that's causing too + * much trouble synchronizing between us and gadget driver. + * + * We have discussed this with the IP Provider and it was + * suggested to giveback all requests here, but give HW some + * extra time to synchronize with the interconnect. We're using + * an arbitraty 100us delay for that. + * + * Note also that a similar handling was tested by Synopsys + * (thanks a lot Paul) and nothing bad has come out of it. + * In short, what we're doing is: + * + * - Issue EndTransfer WITH CMDIOC bit set + * - Wait 100us + * - giveback all requests to gadget driver + */ + udelay(100); + + while (!list_empty(&dep->req_queued)) { + req = next_request(&dep->req_queued); + + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + } + } + while (!list_empty(&dep->request_list)) { req = next_request(&dep->request_list); @@ -741,8 +794,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, case USB_ENDPOINT_XFER_ISOC: trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; - /* IOC every DWC3_TRB_NUM / 4 so we can refill */ - if (!(cur_slot % (DWC3_TRB_NUM / 4))) + if (!req->request.no_interrupt) trb->ctrl |= DWC3_TRB_CTRL_IOC; break; @@ -958,14 +1010,42 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param, dep->flags |= DWC3_EP_BUSY; if (start_new) { - dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc, + dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc, dep->number); - WARN_ON_ONCE(!dep->res_trans_idx); + WARN_ON_ONCE(!dep->resource_index); } return 0; } +static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, + struct dwc3_ep *dep, u32 cur_uf) +{ + u32 uf; + + if (list_empty(&dep->request_list)) { + dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", + dep->name); + return; + } + + /* 4 micro frames in the future */ + uf = cur_uf + dep->interval * 4; + + __dwc3_gadget_kick_transfer(dep, uf, 1); +} + +static void dwc3_gadget_start_isoc(struct dwc3 *dwc, + struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +{ + u32 cur_uf, mask; + + mask = ~(dep->interval - 1); + cur_uf = event->parameters & mask; + + __dwc3_gadget_start_isoc(dwc, dep, cur_uf); +} + static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; @@ -995,11 +1075,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->request_list); - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY)) - dep->flags |= DWC3_EP_PENDING_REQUEST; - /* - * There are two special cases: + * There are a few special cases: * * 1. XferNotReady with empty list of requests. We need to kick the * transfer here in that situation, otherwise we will be NAKing @@ -1008,31 +1085,46 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * able to receive the data until the next request is queued. * The following code is handling exactly that. * - * 2. XferInProgress on Isoc EP with an active transfer. We need to - * kick the transfer here after queuing a request, otherwise the - * core may not see the modified TRB(s). */ if (dep->flags & DWC3_EP_PENDING_REQUEST) { int ret; - int start_trans = 1; - u8 trans_idx = dep->res_trans_idx; - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY)) { - start_trans = 0; - WARN_ON_ONCE(!trans_idx); - } else { - trans_idx = 0; + ret = __dwc3_gadget_kick_transfer(dep, 0, true); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); } + } - ret = __dwc3_gadget_kick_transfer(dep, trans_idx, start_trans); + /* + * 2. XferInProgress on Isoc EP with an active transfer. We need to + * kick the transfer here after queuing a request, otherwise the + * core may not see the modified TRB(s). + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (dep->flags & DWC3_EP_BUSY)) { + WARN_ON_ONCE(!dep->resource_index); + ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index, + false); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; dev_dbg(dwc->dev, "%s: failed to kick transfers\n", dep->name); } - }; + } + + /* + * 3. Missed ISOC Handling. We need to start isoc transfer on the saved + * uframe number. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (dep->flags & DWC3_EP_MISSED_ISOC)) { + __dwc3_gadget_start_isoc(dwc, dep, dep->current_uf); + dep->flags &= ~DWC3_EP_MISSED_ISOC; + } return 0; } @@ -1118,15 +1210,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) memset(¶ms, 0x00, sizeof(params)); if (value) { - if (dep->number == 0 || dep->number == 1) { - /* - * Whenever EP0 is stalled, we will restart - * the state machine, thus moving back to - * Setup Phase - */ - dwc->ep0state = EP0_SETUP_PHASE; - } - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETSTALL, ¶ms); if (ret) @@ -1186,7 +1269,10 @@ static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep) dep->flags |= DWC3_EP_WEDGE; spin_unlock_irqrestore(&dwc->lock, flags); - return dwc3_gadget_ep_set_halt(ep, 1); + if (dep->number == 0 || dep->number == 1) + return dwc3_gadget_ep0_set_halt(ep, 1); + else + return dwc3_gadget_ep_set_halt(ep, 1); } /* -------------------------------------------------------------------------- */ @@ -1204,7 +1290,7 @@ static const struct usb_ep_ops dwc3_gadget_ep0_ops = { .free_request = dwc3_gadget_ep_free_request, .queue = dwc3_gadget_ep0_queue, .dequeue = dwc3_gadget_ep_dequeue, - .set_halt = dwc3_gadget_ep_set_halt, + .set_halt = dwc3_gadget_ep0_set_halt, .set_wedge = dwc3_gadget_ep_set_wedge, }; @@ -1280,9 +1366,13 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g) goto out; } - /* write zeroes to Link Change Request */ - reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* Recent versions do this automatically */ + if (dwc->revision < DWC3_REVISION_194A) { + /* write zeroes to Link Change Request */ + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + } /* poll until Link State changes to ON */ timeout = jiffies + msecs_to_jiffies(100); @@ -1319,16 +1409,21 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, return 0; } -static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) { u32 reg; u32 timeout = 500; reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (is_on) { - reg &= ~DWC3_DCTL_TRGTULST_MASK; - reg |= (DWC3_DCTL_RUN_STOP - | DWC3_DCTL_TRGTULST_RX_DET); + if (dwc->revision <= DWC3_REVISION_187A) { + reg &= ~DWC3_DCTL_TRGTULST_MASK; + reg |= DWC3_DCTL_TRGTULST_RX_DET; + } + + if (dwc->revision >= DWC3_REVISION_194A) + reg &= ~DWC3_DCTL_KEEP_CONNECT; + reg |= DWC3_DCTL_RUN_STOP; } else { reg &= ~DWC3_DCTL_RUN_STOP; } @@ -1346,7 +1441,7 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) } timeout--; if (!timeout) - break; + return -ETIMEDOUT; udelay(1); } while (1); @@ -1354,20 +1449,23 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) dwc->gadget_driver ? dwc->gadget_driver->function : "no-function", is_on ? "connect" : "disconnect"); + + return 0; } static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; + int ret; is_on = !!is_on; spin_lock_irqsave(&dwc->lock, flags); - dwc3_gadget_run_stop(dwc, is_on); + ret = dwc3_gadget_run_stop(dwc, is_on); spin_unlock_irqrestore(&dwc->lock, flags); - return 0; + return ret; } static int dwc3_gadget_start(struct usb_gadget *g, @@ -1468,6 +1566,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g, return 0; } + static const struct usb_gadget_ops dwc3_gadget_ops = { .get_frame = dwc3_gadget_get_frame, .wakeup = dwc3_gadget_wakeup, @@ -1558,6 +1657,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_trb *trb; unsigned int count; unsigned int s_pkt = 0; + unsigned int trb_status; do { req = next_request(&dep->req_queued); @@ -1583,9 +1683,18 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, if (dep->direction) { if (count) { - dev_err(dwc->dev, "incomplete IN transfer %s\n", - dep->name); - status = -ECONNRESET; + trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); + if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { + dev_dbg(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + dep->current_uf = event->parameters & + ~(dep->interval - 1); + dep->flags |= DWC3_EP_MISSED_ISOC; + } else { + dev_err(dwc->dev, "incomplete IN transfer %s\n", + dep->name); + status = -ECONNRESET; + } } } else { if (count && (event->status & DEPEVT_STATUS_SHORT)) @@ -1604,7 +1713,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, if (s_pkt) break; if ((event->status & DEPEVT_STATUS_LST) && - (trb->ctrl & DWC3_TRB_CTRL_LST)) + (trb->ctrl & (DWC3_TRB_CTRL_LST | + DWC3_TRB_CTRL_HWO))) break; if ((event->status & DEPEVT_STATUS_IOC) && (trb->ctrl & DWC3_TRB_CTRL_IOC)) @@ -1657,65 +1767,6 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, } } -static void dwc3_gadget_start_isoc(struct dwc3 *dwc, - struct dwc3_ep *dep, const struct dwc3_event_depevt *event) -{ - u32 uf, mask; - - if (list_empty(&dep->request_list)) { - dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", - dep->name); - return; - } - - mask = ~(dep->interval - 1); - uf = event->parameters & mask; - /* 4 micro frames in the future */ - uf += dep->interval * 4; - - __dwc3_gadget_kick_transfer(dep, uf, 1); -} - -static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep, - const struct dwc3_event_depevt *event) -{ - struct dwc3 *dwc = dep->dwc; - struct dwc3_event_depevt mod_ev = *event; - - /* - * We were asked to remove one request. It is possible that this - * request and a few others were started together and have the same - * transfer index. Since we stopped the complete endpoint we don't - * know how many requests were already completed (and not yet) - * reported and how could be done (later). We purge them all until - * the end of the list. - */ - mod_ev.status = DEPEVT_STATUS_LST; - dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN); - dep->flags &= ~DWC3_EP_BUSY; - /* pending requests are ignored and are queued on XferNotReady */ -} - -static void dwc3_ep_cmd_compl(struct dwc3_ep *dep, - const struct dwc3_event_depevt *event) -{ - u32 param = event->parameters; - u32 cmd_type = (param >> 8) & ((1 << 5) - 1); - - switch (cmd_type) { - case DWC3_DEPCMD_ENDTRANSFER: - dwc3_process_ep_cmd_complete(dep, event); - break; - case DWC3_DEPCMD_STARTTRANSFER: - dep->res_trans_idx = param & 0x7f; - break; - default: - printk(KERN_ERR "%s() unknown /unexpected type: %d\n", - __func__, cmd_type); - break; - }; -} - static void dwc3_endpoint_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { @@ -1724,6 +1775,9 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep = dwc->eps[epnum]; + if (!(dep->flags & DWC3_EP_ENABLED)) + return; + dev_vdbg(dwc->dev, "%s: %s\n", dep->name, dwc3_ep_event_string(event->endpoint_event)); @@ -1734,7 +1788,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, switch (event->endpoint_event) { case DWC3_DEPEVT_XFERCOMPLETE: - dep->res_trans_idx = 0; + dep->resource_index = 0; if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n", @@ -1797,7 +1851,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name); break; case DWC3_DEPEVT_EPCMDCMPLT: - dwc3_ep_cmd_compl(dep, event); + dev_vdbg(dwc->dev, "Endpoint Command Complete\n"); break; } } @@ -1820,16 +1874,16 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) dep = dwc->eps[epnum]; - WARN_ON(!dep->res_trans_idx); - if (dep->res_trans_idx) { - cmd = DWC3_DEPCMD_ENDTRANSFER; - cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; - cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx); - memset(¶ms, 0, sizeof(params)); - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); - WARN_ON_ONCE(ret); - dep->res_trans_idx = 0; - } + if (!dep->resource_index) + return; + + cmd = DWC3_DEPCMD_ENDTRANSFER; + cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); + memset(¶ms, 0, sizeof(params)); + ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); + WARN_ON_ONCE(ret); + dep->resource_index = 0; } static void dwc3_stop_active_transfers(struct dwc3 *dwc) @@ -1872,11 +1926,9 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) { + int reg; + dev_vdbg(dwc->dev, "%s\n", __func__); -#if 0 - XXX - U1/U2 is powersave optimization. Skip it for now. Anyway we need to - enable it before we can disable it. reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_INITU1ENA; @@ -1884,9 +1936,7 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) reg &= ~DWC3_DCTL_INITU2ENA; dwc3_writel(dwc->regs, DWC3_DCTL, reg); -#endif - dwc3_stop_active_transfers(dwc); dwc3_disconnect_gadget(dwc); dwc->start_config_issued = false; @@ -1894,30 +1944,30 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc->setup_packet_pending = false; } -static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on) +static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - if (on) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; - else + if (suspend) reg |= DWC3_GUSB3PIPECTL_SUSPHY; + else + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); } -static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on) +static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend) { u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (on) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - else + if (suspend) reg |= DWC3_GUSB2PHYCFG_SUSPHY; + else + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } @@ -1962,16 +2012,18 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) /* after reset -> Default State */ dwc->dev_state = DWC3_DEFAULT_STATE; - /* Enable PHYs */ - dwc3_gadget_usb2_phy_power(dwc, true); - dwc3_gadget_usb3_phy_power(dwc, true); + /* Recent versions support automatic phy suspend and don't need this */ + if (dwc->revision < DWC3_REVISION_194A) { + /* Resume PHYs */ + dwc3_gadget_usb2_phy_suspend(dwc, false); + dwc3_gadget_usb3_phy_suspend(dwc, false); + } if (dwc->gadget.speed != USB_SPEED_UNKNOWN) dwc3_disconnect_gadget(dwc); reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; - reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->test_mode = false; @@ -2010,16 +2062,16 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed) dwc3_writel(dwc->regs, DWC3_GCTL, reg); } -static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed) +static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed) { switch (speed) { case USB_SPEED_SUPER: - dwc3_gadget_usb2_phy_power(dwc, false); + dwc3_gadget_usb2_phy_suspend(dwc, true); break; case USB_SPEED_HIGH: case USB_SPEED_FULL: case USB_SPEED_LOW: - dwc3_gadget_usb3_phy_power(dwc, false); + dwc3_gadget_usb3_phy_suspend(dwc, true); break; } } @@ -2082,8 +2134,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) break; } - /* Disable unneded PHY */ - dwc3_gadget_disable_phy(dwc, dwc->gadget.speed); + /* Recent versions support automatic phy suspend and don't need this */ + if (dwc->revision < DWC3_REVISION_194A) { + /* Suspend unneeded PHY */ + dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed); + } dep = dwc->eps[0]; ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL); @@ -2373,10 +2428,6 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg); - reg = dwc3_readl(dwc->regs, DWC3_DCTL); - reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); - /* Enable all but Start and End of Frame IRQs */ reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | DWC3_DEVTEN_EVNTOVERFLOWEN | @@ -2389,6 +2440,24 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) DWC3_DEVTEN_DISCONNEVTEN); dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); + /* Enable USB2 LPM and automatic phy suspend only on recent versions */ + if (dwc->revision >= DWC3_REVISION_194A) { + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_LPM_CAP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); + + /* TODO: This should be configurable */ + reg |= DWC3_DCTL_HIRD_THRES(28); + + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + + dwc3_gadget_usb2_phy_suspend(dwc, false); + dwc3_gadget_usb3_phy_suspend(dwc, false); + } + ret = device_register(&dwc->gadget.dev); if (ret) { dev_err(dwc->dev, "failed to register gadget device\n"); diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 95ef6a2f776..99e6d724882 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -66,7 +66,12 @@ struct dwc3; #define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17) #define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22) #define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26) +/* This applies for core versions earlier than 1.94a */ #define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31) +/* These apply for core versions 1.94a and later */ +#define DWC3_DEPCFG_ACTION_INIT (0 << 30) +#define DWC3_DEPCFG_ACTION_RESTORE (1 << 30) +#define DWC3_DEPCFG_ACTION_MODIFY (2 << 30) /* DEPXFERCFG parameter 0 */ #define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) @@ -106,6 +111,7 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event); void dwc3_ep0_out_start(struct dwc3 *dwc); +int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); |