diff options
| -rw-r--r-- | arch/arm/mach-pxa/tosa.c | 43 | ||||
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/keyboard/tosakbd.c | 415 | ||||
| -rw-r--r-- | include/asm-arm/arch-pxa/tosa.h | 30 |
5 files changed, 510 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 240fd042083..e7e0f52d608 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -21,6 +21,8 @@ #include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/delay.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <asm/setup.h> #include <asm/memory.h> @@ -253,6 +255,46 @@ static struct platform_device tosakbd_device = { .id = -1, }; +static struct gpio_keys_button tosa_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = TOSA_GPIO_ON_KEY, + .desc = "On key", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = TOSA_KEY_RECORD, + .gpio = TOSA_GPIO_RECORD_BTN, + .desc = "Record Button", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = TOSA_KEY_SYNC, + .gpio = TOSA_GPIO_SYNC, + .desc = "Sync Button", + .wakeup = 1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { + .buttons = tosa_gpio_keys, + .nbuttons = ARRAY_SIZE(tosa_gpio_keys), +}; + +static struct platform_device tosa_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &tosa_gpio_keys_platform_data, + }, +}; + /* * Tosa LEDs */ @@ -265,6 +307,7 @@ static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, &tosakbd_device, + &tosa_gpio_keys_device, &tosaled_device, }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 086d58c0ccb..0c327621bd8 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -154,6 +154,27 @@ config KEYBOARD_SPITZ To compile this driver as a module, choose M here: the module will be called spitzkbd. +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index e97455fdcc8..6caa065e27a 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c new file mode 100644 index 00000000000..3884d1e3f07 --- /dev/null +++ b/drivers/input/keyboard/tosakbd.c @@ -0,0 +1,415 @@ +/* + * Keyboard driver for Sharp Tosa models (SL-6000x) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007 Dmitry Baryshkov + * + * Based on xtkbd.c/locomkbd.c/corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/tosa.h> + +#define KB_ROWMASK(r) (1 << (r)) +#define SCANCODE(r, c) (((r)<<4) + (c) + 1) +#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 + +#define SCAN_INTERVAL (HZ/10) + +#define KB_DISCHARGE_DELAY 10 +#define KB_ACTIVATE_DELAY 10 + +static unsigned int tosakbd_keycode[NR_SCANCODES] = { +0, +0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, +KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, +KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, +0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, +KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, +0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, +KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, +0, 0, 0, +}; + +struct tosakbd { + unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)]; + struct input_dev *input; + + spinlock_t lock; /* protect kbd scanning */ + struct timer_list timer; +}; + + +/* Helper functions for reading the keyboard matrix + * Note: We should really be using pxa_gpio_mode to alter GPDR but it + * requires a function call per GPIO bit which is excessive + * when we need to access 12 bits at once, multiple times. + * These functions must be called within local_irq_save()/local_irq_restore() + * or similar. + */ +#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) + +static inline void tosakbd_discharge_all(void) +{ + /* STROBE All HiZ */ + GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; + GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; + GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; + GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; +} + +static inline void tosakbd_activate_all(void) +{ + /* STROBE ALL -> High */ + GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; + GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; + GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; + GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; + + udelay(KB_DISCHARGE_DELAY); + + /* STATE CLEAR */ + GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; +} + +static inline void tosakbd_activate_col(int col) +{ + if (col <= 5) { + /* STROBE col -> High, not col -> HiZ */ + GPSR1 = TOSA_GPIO_STROBE_BIT(col); + GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } else { + /* STROBE col -> High, not col -> HiZ */ + GPSR2 = TOSA_GPIO_STROBE_BIT(col); + GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } +} + +static inline void tosakbd_reset_col(int col) +{ + if (col <= 5) { + /* STROBE col -> Low */ + GPCR1 = TOSA_GPIO_STROBE_BIT(col); + /* STROBE col -> out, not col -> HiZ */ + GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } else { + /* STROBE col -> Low */ + GPCR2 = TOSA_GPIO_STROBE_BIT(col); + /* STROBE col -> out, not col -> HiZ */ + GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } +} +/* + * The tosa keyboard only generates interrupts when a key is pressed. + * So when a key is pressed, we enable a timer. This timer scans the + * keyboard, and this is how we detect when the key is released. + */ + +/* Scan the hardware keyboard and push any changes up through the input layer */ +static void tosakbd_scankeyboard(struct platform_device *dev) +{ + struct tosakbd *tosakbd = platform_get_drvdata(dev); + unsigned int row, col, rowd; + unsigned long flags; + unsigned int num_pressed = 0; + + spin_lock_irqsave(&tosakbd->lock, flags); + + for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { + /* + * Discharge the output driver capacitatance + * in the keyboard matrix. (Yes it is significant..) + */ + tosakbd_discharge_all(); + udelay(KB_DISCHARGE_DELAY); + + tosakbd_activate_col(col); + udelay(KB_ACTIVATE_DELAY); + + rowd = GET_ROWS_STATUS(col); + + for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { + unsigned int scancode, pressed; + scancode = SCANCODE(row, col); + pressed = rowd & KB_ROWMASK(row); + + if (pressed && !tosakbd->keycode[scancode]) + dev_warn(&dev->dev, + "unhandled scancode: 0x%02x\n", + scancode); + + input_report_key(tosakbd->input, + tosakbd->keycode[scancode], + pressed); + if (pressed) + num_pressed++; + } + + tosakbd_reset_col(col); + } + + tosakbd_activate_all(); + + input_sync(tosakbd->input); + + /* if any keys are pressed, enable the timer */ + if (num_pressed) + mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); + + spin_unlock_irqrestore(&tosakbd->lock, flags); +} + +/* + * tosa keyboard interrupt handler. + */ +static irqreturn_t tosakbd_interrupt(int irq, void *__dev) +{ + struct platform_device *dev = __dev; + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + if (!timer_pending(&tosakbd->timer)) { + /** wait chattering delay **/ + udelay(20); + tosakbd_scankeyboard(dev); + } + + return IRQ_HANDLED; +} + +/* + * tosa timer checking for released keys + */ +static void tosakbd_timer_callback(unsigned long __dev) +{ + struct platform_device *dev = (struct platform_device *)__dev; + tosakbd_scankeyboard(dev); +} + +#ifdef CONFIG_PM +static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) +{ + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + del_timer_sync(&tosakbd->timer); + + return 0; +} + +static int tosakbd_resume(struct platform_device *dev) +{ + tosakbd_scankeyboard(dev); + + return 0; +} +#else +#define tosakbd_suspend NULL +#define tosakbd_resume NULL +#endif + +static int __devinit tosakbd_probe(struct platform_device *pdev) { + + int i; + struct tosakbd *tosakbd; + struct input_dev *input_dev; + int error; + + tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); + if (!tosakbd) + return -ENOMEM; + + input_dev = input_allocate_device(); + if (!input_dev) { + kfree(tosakbd); + return -ENOMEM; + } + + platform_set_drvdata(pdev, tosakbd); + + spin_lock_init(&tosakbd->lock); + + /* Init Keyboard rescan timer */ + init_timer(&tosakbd->timer); + tosakbd->timer.function = tosakbd_timer_callback; + tosakbd->timer.data = (unsigned long) pdev; + + tosakbd->input = input_dev; + + input_set_drvdata(input_dev, tosakbd); + input_dev->name = "Tosa Keyboard"; + input_dev->phys = "tosakbd/input0"; + input_dev->dev.parent = &pdev->dev; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = tosakbd->keycode; + input_dev->keycodesize = sizeof(unsigned int); + input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); + + memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); + + for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) + __set_bit(tosakbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ + for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { + int gpio = TOSA_GPIO_KEY_SENSE(i); + int irq; + error = gpio_request(gpio, "tosakbd"); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to request GPIO %d, " + " error %d\n", gpio, error); + goto fail; + } + + error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to configure input" + " direction for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + irq = gpio_to_irq(gpio); + if (irq < 0) { + error = irq; + printk(KERN_ERR "gpio-keys: Unable to get irq number" + " for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + error = request_irq(irq, tosakbd_interrupt, + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "tosakbd", pdev); + + if (error) { + printk("tosakbd: Can't get IRQ: %d: error %d!\n", + irq, error); + gpio_free(gpio); + goto fail; + } + } + + /* Set Strobe lines as outputs - set high */ + for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { + int gpio = TOSA_GPIO_KEY_STROBE(i); + error = gpio_request(gpio, "tosakbd"); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to request GPIO %d, " + " error %d\n", gpio, error); + goto fail2; + } + + error = gpio_direction_output(gpio, 1); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to configure input" + " direction for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + } + + error = input_register_device(input_dev); + if (error) { + printk(KERN_ERR "tosakbd: Unable to register input device, " + "error: %d\n", error); + goto fail; + } + + printk(KERN_INFO "input: Tosa Keyboard Registered\n"); + + return 0; + +fail2: + while (--i >= 0) + gpio_free(TOSA_GPIO_KEY_STROBE(i)); + + i = TOSA_KEY_SENSE_NUM; +fail: + while (--i >= 0) { + free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); + gpio_free(TOSA_GPIO_KEY_SENSE(i)); + } + + platform_set_drvdata(pdev, NULL); + input_free_device(input_dev); + kfree(tosakbd); + + return error; +} + +static int __devexit tosakbd_remove(struct platform_device *dev) { + + int i; + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) + gpio_free(TOSA_GPIO_KEY_STROBE(i)); + + for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { + free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); + gpio_free(TOSA_GPIO_KEY_SENSE(i)); + } + + del_timer_sync(&tosakbd->timer); + + input_unregister_device(tosakbd->input); + + kfree(tosakbd); + + return 0; +} + +static struct platform_driver tosakbd_driver = { + .probe = tosakbd_probe, + .remove = __devexit_p(tosakbd_remove), + .suspend = tosakbd_suspend, + .resume = tosakbd_resume, + .driver = { + .name = "tosa-keyboard", + }, +}; + +static int __devinit tosakbd_init(void) +{ + return platform_driver_register(&tosakbd_driver); +} + +static void __exit tosakbd_exit(void) +{ + platform_driver_unregister(&tosakbd_driver); +} + +module_init(tosakbd_init); +module_exit(tosakbd_exit); + +MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>"); +MODULE_DESCRIPTION("Tosa Keyboard Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c3364a2c475..c05e4faf85a 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -163,4 +163,34 @@ extern struct platform_device tosascoop_jc_device; extern struct platform_device tosascoop_device; + +#define TOSA_KEY_SYNC KEY_102ND /* ??? */ + + +#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#define TOSA_KEY_RECORD KEY_YEN +#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA +#define TOSA_KEY_CANCEL KEY_ESC +#define TOSA_KEY_CENTER KEY_HIRAGANA +#define TOSA_KEY_OK KEY_HENKAN +#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA +#define TOSA_KEY_HOMEPAGE KEY_HANGEUL +#define TOSA_KEY_LIGHT KEY_MUHENKAN +#define TOSA_KEY_MENU KEY_HANJA +#define TOSA_KEY_FN KEY_RIGHTALT +#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU +#else +#define TOSA_KEY_RECORD KEY_RECORD +#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK +#define TOSA_KEY_CANCEL KEY_CANCEL +#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ +#define TOSA_KEY_OK KEY_OK +#define TOSA_KEY_CALENDAR KEY_CALENDAR +#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE +#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE +#define TOSA_KEY_MENU KEY_MENU +#define TOSA_KEY_FN KEY_FN +#define TOSA_KEY_MAIL KEY_MAIL +#endif + #endif /* _ASM_ARCH_TOSA_H_ */ |