summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--net/dsa/Kconfig4
-rw-r--r--net/dsa/mv88e6131.c26
2 files changed, 23 insertions, 7 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 87bb5f4de0e..c53ded2a98d 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU
default n
config NET_DSA_MV88E6131
- bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+ bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
select NET_DSA_MV88E6XXX
select NET_DSA_MV88E6XXX_NEED_PPU
select NET_DSA_TAG_DSA
---help---
- This enables support for the Marvell 88E6095/6095F/6131
+ This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
config NET_DSA_MV88E6123_61_65
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index 3da418894ef..45f7411e90b 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -207,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* mode, but do not enable forwarding of unknown unicasts.
*/
val = 0x0433;
- if (p == dsa_upstream_port(ds))
+ if (p == dsa_upstream_port(ds)) {
val |= 0x0104;
+ /*
+ * On 6085, unknown multicast forward is controlled
+ * here rather than in Port Control 2 register.
+ */
+ if (ps->id == ID_6085)
+ val |= 0x0008;
+ }
if (ds->dsa_port_mask & (1 << p))
val |= 0x0100;
REG_WRITE(addr, 0x04, val);
@@ -251,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* If this is the upstream port for this switch, enable
* forwarding of unknown multicast addresses.
*/
- val = 0x0080 | dsa_upstream_port(ds);
- if (p == dsa_upstream_port(ds))
- val |= 0x0040;
- REG_WRITE(addr, 0x08, val);
+ if (ps->id == ID_6085)
+ /*
+ * on 6085, bits 3:0 are reserved, bit 6 control ARP
+ * mirroring, and multicast forward is handled in
+ * Port Control register.
+ */
+ REG_WRITE(addr, 0x08, 0x0080);
+ else {
+ val = 0x0080 | dsa_upstream_port(ds);
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0040;
+ REG_WRITE(addr, 0x08, val);
+ }
/*
* Rate Control: disable ingress rate limiting.