diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/exynos5410-clock.txt | 45 | ||||
| -rw-r--r-- | drivers/clk/samsung/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/samsung/clk-exynos5410.c | 209 | ||||
| -rw-r--r-- | include/dt-bindings/clock/exynos5410.h | 33 |
4 files changed, 288 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt new file mode 100644 index 00000000000..aeab635b07b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt @@ -0,0 +1,45 @@ +* Samsung Exynos5410 Clock Controller + +The Exynos5410 clock controller generates and supplies clock to various +controllers within the Exynos5410 SoC. + +Required Properties: + +- compatible: should be "samsung,exynos5410-clock" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos5410.h header and can be used in device +tree sources. + +External clock: + +There is clock that is generated outside the SoC. It +is expected that it is defined using standard clock bindings +with following clock-output-name: + + - "fin_pll" - PLL input clock from XXTI + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 25646c61a02..69e81773164 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o +obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c new file mode 100644 index 00000000000..c9505ab9ee7 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5410.c @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Author: Tarek Dakhran <t.dakhran@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5410 SoC. +*/ + +#include <dt-bindings/clock/exynos5410.h> + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk.h" + +#define APLL_LOCK 0x0 +#define APLL_CON0 0x100 +#define CPLL_LOCK 0x10020 +#define CPLL_CON0 0x10120 +#define MPLL_LOCK 0x4000 +#define MPLL_CON0 0x4100 +#define BPLL_LOCK 0x20010 +#define BPLL_CON0 0x20110 +#define KPLL_LOCK 0x28000 +#define KPLL_CON0 0x28100 + +#define SRC_CPU 0x200 +#define DIV_CPU0 0x500 +#define SRC_CPERI1 0x4204 +#define DIV_TOP0 0x10510 +#define DIV_TOP1 0x10514 +#define DIV_FSYS1 0x1054c +#define DIV_FSYS2 0x10550 +#define DIV_PERIC0 0x10558 +#define SRC_TOP0 0x10210 +#define SRC_TOP1 0x10214 +#define SRC_TOP2 0x10218 +#define SRC_FSYS 0x10244 +#define SRC_PERIC0 0x10250 +#define SRC_MASK_FSYS 0x10340 +#define SRC_MASK_PERIC0 0x10350 +#define GATE_BUS_FSYS0 0x10740 +#define GATE_IP_FSYS 0x10944 +#define GATE_IP_PERIC 0x10950 +#define GATE_IP_PERIS 0x10960 +#define SRC_CDREX 0x20200 +#define SRC_KFC 0x28200 +#define DIV_KFC0 0x28500 + +/* list of PLLs */ +enum exynos5410_plls { + apll, cpll, mpll, + bpll, kpll, + nr_plls /* number of PLLs */ +}; + +/* list of all parent clocks */ +PNAME(apll_p) = { "fin_pll", "fout_apll", }; +PNAME(bpll_p) = { "fin_pll", "fout_bpll", }; +PNAME(cpll_p) = { "fin_pll", "fout_cpll" }; +PNAME(mpll_p) = { "fin_pll", "fout_mpll", }; +PNAME(kpll_p) = { "fin_pll", "fout_kpll", }; + +PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", }; +PNAME(mout_kfc_p) = { "mout_kpll", "sclk_mpll", }; + +PNAME(mpll_user_p) = { "fin_pll", "sclk_mpll", }; +PNAME(bpll_user_p) = { "fin_pll", "sclk_bpll", }; +PNAME(mpll_bpll_p) = { "sclk_mpll_muxed", "sclk_bpll_muxed", }; + +PNAME(group2_p) = { "fin_pll", "fin_pll", "none", "none", + "none", "none", "sclk_mpll_bpll", + "none", "none", "sclk_cpll" }; + +static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = { + MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1), + MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1), + + MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1), + MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1), + + MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1), + MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1), + + MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1), + MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1), + + MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1), + + MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1), + + MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4), + MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4), + MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4), + + MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4), + MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4), + MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4), + + MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1), + MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1), +}; + +static struct samsung_div_clock exynos5410_div_clks[] __initdata = { + DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3), + DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3), + + DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3), + DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3), + DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3), + DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3), + + DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3), + DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3), + DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3), + + DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3), + DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3), + + DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), + + DIV_F(0, "div_mmc_pre0", "div_mmc0", + DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(0, "div_mmc_pre1", "div_mmc1", + DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(0, "div_mmc_pre2", "div_mmc2", + DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0), + + DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4), + DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4), + DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4), + DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4), + + DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3), + DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3), +}; + +static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = { + GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0), + + GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0", + SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1", + SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2", + SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0), + + GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0), + GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0), + GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0), + + GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0), + GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0), + GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0), + + GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0", + SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1", + SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0), + GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2", + SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0), +}; + +static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = { + [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK, + APLL_CON0, NULL), + [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK, + CPLL_CON0, NULL), + [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK, + MPLL_CON0, NULL), + [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK, + BPLL_CON0, NULL), + [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK, + KPLL_CON0, NULL), +}; + +/* register exynos5410 clocks */ +static void __init exynos5410_clk_init(struct device_node *np) +{ + struct samsung_clk_provider *ctx; + void __iomem *reg_base; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS); + + samsung_clk_register_pll(ctx, exynos5410_plls, + ARRAY_SIZE(exynos5410_plls), reg_base); + + samsung_clk_register_mux(ctx, exynos5410_mux_clks, + ARRAY_SIZE(exynos5410_mux_clks)); + samsung_clk_register_div(ctx, exynos5410_div_clks, + ARRAY_SIZE(exynos5410_div_clks)); + samsung_clk_register_gate(ctx, exynos5410_gate_clks, + ARRAY_SIZE(exynos5410_gate_clks)); + + pr_debug("Exynos5410: clock setup completed.\n"); +} +CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init); diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h new file mode 100644 index 00000000000..9b180f032e2 --- /dev/null +++ b/include/dt-bindings/clock/exynos5410.h @@ -0,0 +1,33 @@ +#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H +#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H + +/* core clocks */ +#define CLK_FIN_PLL 1 +#define CLK_FOUT_APLL 2 +#define CLK_FOUT_CPLL 3 +#define CLK_FOUT_MPLL 4 +#define CLK_FOUT_BPLL 5 +#define CLK_FOUT_KPLL 6 + +/* gate for special clocks (sclk) */ +#define CLK_SCLK_UART0 128 +#define CLK_SCLK_UART1 129 +#define CLK_SCLK_UART2 130 +#define CLK_SCLK_UART3 131 +#define CLK_SCLK_MMC0 132 +#define CLK_SCLK_MMC1 133 +#define CLK_SCLK_MMC2 134 + +/* gate clocks */ +#define CLK_UART0 257 +#define CLK_UART1 258 +#define CLK_UART2 259 +#define CLK_UART3 260 +#define CLK_MCT 315 +#define CLK_MMC0 351 +#define CLK_MMC1 352 +#define CLK_MMC2 353 + +#define CLK_NR_CLKS 512 + +#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */ |