diff options
46 files changed, 1582 insertions, 1052 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt index b032dd76e9d..a2331372068 100644 --- a/Documentation/devicetree/bindings/spi/fsl-spi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt @@ -42,6 +42,10 @@ Required properties: - interrupts : should contain eSPI interrupt, the device has one interrupt. - fsl,espi-num-chipselects : the number of the chipselect signals. +Optional properties: +- fsl,csbef: chip select assertion time in bits before frame starts +- fsl,csaft: chip select negation time in bits after frame ends + Example: spi@110000 { #address-cells = <1>; @@ -51,4 +55,6 @@ Example: interrupts = <53 0x2>; interrupt-parent = <&mpic>; fsl,espi-num-chipselects = <4>; + fsl,csbef = <1>; + fsl,csaft = <1>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index e5a4d1b4acf..22d57404fdc 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -55,6 +55,8 @@ contain the following properties. chip select active high - spi-3wire - (optional) Empty property indicating device requires 3-wire mode. +- spi-lsb-first - (optional) Empty property indicating device requires + LSB first mode. - spi-tx-bus-width - (optional) The bus width(number of data wires) that used for MOSI. Defaults to 1 if not present. - spi-rx-bus-width - (optional) The bus width(number of data wires) that diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt new file mode 100644 index 00000000000..94f09141a4f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.txt @@ -0,0 +1,31 @@ +Cadence SPI controller Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". +- reg : Physical base address and size of SPI registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller +- clock-names : List of input clock names - "ref_clk", "pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). + +Optional properties: +- num-cs : Number of chip selects used. + If a decoder is used, this will be the number of + chip selects after the decoder. +- is-decoded-cs : Flag to indicate whether decoder is used or not. + +Example: + + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + } ; diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt new file mode 100644 index 00000000000..7b63ed60199 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-dw.txt @@ -0,0 +1,24 @@ +Synopsys DesignWare SPI master + +Required properties: +- compatible: should be "snps,designware-spi" +- #address-cells: see spi-bus.txt +- #size-cells: see spi-bus.txt +- reg: address and length of the spi master registers +- interrupts: should contain one interrupt +- clocks: spi clock phandle +- num-cs: see spi-bus.txt + +Optional properties: +- cs-gpios: see spi-bus.txt + +Example: + +spi: spi@4020a000 { + compatible = "snps,designware-spi"; + interrupts = <11 1>; + reg = <0x4020a000 0x1000>; + clocks = <&pclk>; + num-cs = <2>; + cs-gpios = <&banka 0 0>; +}; diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 943f7e95ec1..1ba4600de69 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -20,7 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-adi2.h> -#include <asm/bfin_spi3.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin_spi3_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if IS_ENABLED(CONFIG_SPI_SPIDEV) -static struct bfin_spi3_chip spidev_chip_info = { +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin_spi3_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin_spi3_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif @@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 56200f37cfc..244fa4ab4c5 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -363,6 +363,12 @@ static struct clk ethclk = { .ops = &dummy_clk_ops, }; +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + static struct clk_lookup bf609_clks[] = { CLK(sys_clkin, NULL, "SYS_CLKIN"), CLK(pll_clk, NULL, "PLLCLK"), @@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = { CLK(dclk, NULL, "DCLK"), CLK(oclk, NULL, "OCLK"), CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), }; int __init clk_init(void) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 60f2b41c731..213b5cbb9dc 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -91,8 +91,8 @@ config SPI_BFIN5XX help This is the SPI controller master driver for Blackfin 5xx processor. -config SPI_BFIN_V3 - tristate "SPI controller v3 for Blackfin" +config SPI_ADI_V3 + tristate "SPI controller v3 for ADI" depends on BF60x help This is the SPI controller v3 master driver @@ -148,6 +148,13 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_CADENCE + tristate "Cadence SPI controller" + depends on ARM + help + This selects the Cadence SPI controller master driver + used by Xilinx Zynq. + config SPI_CLPS711X tristate "CLPS711X host SPI controller" depends on ARCH_CLPS711X || COMPILE_TEST @@ -505,7 +512,7 @@ config SPI_TEGRA20_SLINK config SPI_TOPCLIFF_PCH tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus used in some x86 embedded processors. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index bd792669e56..929c9f5eac0 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -18,10 +18,11 @@ obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o -obj-$(CONFIG_SPI_BFIN_V3) += spi-bfin-v3.o +obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o +obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o diff --git a/drivers/spi/spi-bfin-v3.c b/drivers/spi/spi-adi-v3.c index 4089d0e0d84..dcb2287c7f8 100644 --- a/drivers/spi/spi-bfin-v3.c +++ b/drivers/spi/spi-adi-v3.c @@ -1,7 +1,7 @@ /* * Analog Devices SPI3 controller driver * - * Copyright (c) 2013 Analog Devices Inc. + * Copyright (c) 2014 Analog Devices Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/dma-mapping.h> @@ -26,35 +27,34 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spi/spi.h> +#include <linux/spi/adi_spi3.h> #include <linux/types.h> -#include <asm/bfin_spi3.h> -#include <asm/cacheflush.h> #include <asm/dma.h> #include <asm/portmux.h> -enum bfin_spi_state { +enum adi_spi_state { START_STATE, RUNNING_STATE, DONE_STATE, ERROR_STATE }; -struct bfin_spi_master; +struct adi_spi_master; -struct bfin_spi_transfer_ops { - void (*write) (struct bfin_spi_master *); - void (*read) (struct bfin_spi_master *); - void (*duplex) (struct bfin_spi_master *); +struct adi_spi_transfer_ops { + void (*write) (struct adi_spi_master *); + void (*read) (struct adi_spi_master *); + void (*duplex) (struct adi_spi_master *); }; /* runtime info for spi master */ -struct bfin_spi_master { +struct adi_spi_master { /* SPI framework hookup */ struct spi_master *master; /* Regs base of SPI controller */ - struct bfin_spi_regs __iomem *regs; + struct adi_spi_regs __iomem *regs; /* Pin request list */ u16 *pin_req; @@ -65,7 +65,7 @@ struct bfin_spi_master { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct bfin_spi_device *cur_chip; + struct adi_spi_device *cur_chip; unsigned transfer_len; /* transfer buffer */ @@ -90,12 +90,12 @@ struct bfin_spi_master { u32 ssel; unsigned long sclk; - enum bfin_spi_state state; + enum adi_spi_state state; - const struct bfin_spi_transfer_ops *ops; + const struct adi_spi_transfer_ops *ops; }; -struct bfin_spi_device { +struct adi_spi_device { u32 control; u32 clock; u32 ssel; @@ -105,17 +105,25 @@ struct bfin_spi_device { u32 cs_gpio; u32 tx_dummy_val; /* tx value for rx only transfer */ bool enable_dma; - const struct bfin_spi_transfer_ops *ops; + const struct adi_spi_transfer_ops *ops; }; -static void bfin_spi_enable(struct bfin_spi_master *drv_data) +static void adi_spi_enable(struct adi_spi_master *drv_data) { - bfin_write_or(&drv_data->regs->control, SPI_CTL_EN); + u32 ctl; + + ctl = ioread32(&drv_data->regs->control); + ctl |= SPI_CTL_EN; + iowrite32(ctl, &drv_data->regs->control); } -static void bfin_spi_disable(struct bfin_spi_master *drv_data) +static void adi_spi_disable(struct adi_spi_master *drv_data) { - bfin_write_and(&drv_data->regs->control, ~SPI_CTL_EN); + u32 ctl; + + ctl = ioread32(&drv_data->regs->control); + ctl &= ~SPI_CTL_EN; + iowrite32(ctl, &drv_data->regs->control); } /* Caculate the SPI_CLOCK register value based on input HZ */ @@ -128,35 +136,43 @@ static u32 hz_to_spi_clock(u32 sclk, u32 speed_hz) return spi_clock; } -static int bfin_spi_flush(struct bfin_spi_master *drv_data) +static int adi_spi_flush(struct adi_spi_master *drv_data) { unsigned long limit = loops_per_jiffy << 1; /* wait for stop and clear stat */ - while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit) + while (!(ioread32(&drv_data->regs->status) & SPI_STAT_SPIF) && --limit) cpu_relax(); - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); return limit; } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct bfin_spi_master *drv_data, struct bfin_spi_device *chip) +static void adi_spi_cs_active(struct adi_spi_master *drv_data, struct adi_spi_device *chip) { - if (likely(chip->cs < MAX_CTRL_CS)) - bfin_write_and(&drv_data->regs->ssel, ~chip->ssel); - else + if (likely(chip->cs < MAX_CTRL_CS)) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg &= ~chip->ssel; + iowrite32(reg, &drv_data->regs->ssel); + } else { gpio_set_value(chip->cs_gpio, 0); + } } -static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static void adi_spi_cs_deactive(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (likely(chip->cs < MAX_CTRL_CS)) - bfin_write_or(&drv_data->regs->ssel, chip->ssel); - else + if (likely(chip->cs < MAX_CTRL_CS)) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg |= chip->ssel; + iowrite32(reg, &drv_data->regs->ssel); + } else { gpio_set_value(chip->cs_gpio, 1); + } /* Move delay here for consistency */ if (chip->cs_chg_udelay) @@ -164,187 +180,192 @@ static void bfin_spi_cs_deactive(struct bfin_spi_master *drv_data, } /* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ -static inline void bfin_spi_cs_enable(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static inline void adi_spi_cs_enable(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (chip->cs < MAX_CTRL_CS) - bfin_write_or(&drv_data->regs->ssel, chip->ssel >> 8); + if (chip->cs < MAX_CTRL_CS) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg |= chip->ssel >> 8; + iowrite32(reg, &drv_data->regs->ssel); + } } -static inline void bfin_spi_cs_disable(struct bfin_spi_master *drv_data, - struct bfin_spi_device *chip) +static inline void adi_spi_cs_disable(struct adi_spi_master *drv_data, + struct adi_spi_device *chip) { - if (chip->cs < MAX_CTRL_CS) - bfin_write_and(&drv_data->regs->ssel, ~(chip->ssel >> 8)); + if (chip->cs < MAX_CTRL_CS) { + u32 reg; + reg = ioread32(&drv_data->regs->ssel); + reg &= ~(chip->ssel >> 8); + iowrite32(reg, &drv_data->regs->ssel); + } } /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct bfin_spi_master *drv_data) +static void adi_spi_restore_state(struct adi_spi_master *drv_data) { - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; /* Clear status and disable clock */ - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); - bfin_write(&drv_data->regs->rx_control, 0x0); - bfin_write(&drv_data->regs->tx_control, 0x0); - bfin_spi_disable(drv_data); - - SSYNC(); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); + iowrite32(0x0, &drv_data->regs->rx_control); + iowrite32(0x0, &drv_data->regs->tx_control); + adi_spi_disable(drv_data); /* Load the registers */ - bfin_write(&drv_data->regs->control, chip->control); - bfin_write(&drv_data->regs->clock, chip->clock); + iowrite32(chip->control, &drv_data->regs->control); + iowrite32(chip->clock, &drv_data->regs->clock); - bfin_spi_enable(drv_data); + adi_spi_enable(drv_data); drv_data->tx_num = drv_data->rx_num = 0; /* we always choose tx transfer initiate */ - bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN); - bfin_write(&drv_data->regs->tx_control, - SPI_TXCTL_TEN | SPI_TXCTL_TTI); - bfin_spi_cs_active(drv_data, chip); + iowrite32(SPI_RXCTL_REN, &drv_data->regs->rx_control); + iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI, &drv_data->regs->tx_control); + adi_spi_cs_active(drv_data, chip); } /* discard invalid rx data and empty rfifo */ -static inline void dummy_read(struct bfin_spi_master *drv_data) +static inline void dummy_read(struct adi_spi_master *drv_data) { - while (!(bfin_read(&drv_data->regs->status) & SPI_STAT_RFE)) - bfin_read(&drv_data->regs->rfifo); + while (!(ioread32(&drv_data->regs->status) & SPI_STAT_RFE)) + ioread32(&drv_data->regs->rfifo); } -static void bfin_spi_u8_write(struct bfin_spi_master *drv_data) +static void adi_spi_u8_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++))); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u8_read(struct bfin_spi_master *drv_data) +static void adi_spi_u8_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo); + *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u8_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u8_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u8 *)(drv_data->tx++))); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(*(u8 *)(drv_data->tx++), &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u8 *)(drv_data->rx++) = bfin_read(&drv_data->regs->rfifo); + *(u8 *)(drv_data->rx++) = ioread32(&drv_data->regs->rfifo); } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { - .write = bfin_spi_u8_write, - .read = bfin_spi_u8_read, - .duplex = bfin_spi_u8_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u8 = { + .write = adi_spi_u8_write, + .read = adi_spi_u8_read, + .duplex = adi_spi_u8_duplex, }; -static void bfin_spi_u16_write(struct bfin_spi_master *drv_data) +static void adi_spi_u16_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx)); + iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 2; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u16_read(struct bfin_spi_master *drv_data) +static void adi_spi_u16_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 2; } } -static void bfin_spi_u16_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u16_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u16 *)drv_data->tx)); + iowrite32(*(u16 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 2; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u16 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u16 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 2; } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { - .write = bfin_spi_u16_write, - .read = bfin_spi_u16_read, - .duplex = bfin_spi_u16_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u16 = { + .write = adi_spi_u16_write, + .read = adi_spi_u16_read, + .duplex = adi_spi_u16_duplex, }; -static void bfin_spi_u32_write(struct bfin_spi_master *drv_data) +static void adi_spi_u32_write(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx)); + iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 4; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - bfin_read(&drv_data->regs->rfifo); + ioread32(&drv_data->regs->rfifo); } } -static void bfin_spi_u32_read(struct bfin_spi_master *drv_data) +static void adi_spi_u32_read(struct adi_spi_master *drv_data) { u32 tx_val = drv_data->cur_chip->tx_dummy_val; dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, tx_val); - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + iowrite32(tx_val, &drv_data->regs->tfifo); + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 4; } } -static void bfin_spi_u32_duplex(struct bfin_spi_master *drv_data) +static void adi_spi_u32_duplex(struct adi_spi_master *drv_data) { dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - bfin_write(&drv_data->regs->tfifo, (*(u32 *)drv_data->tx)); + iowrite32(*(u32 *)drv_data->tx, &drv_data->regs->tfifo); drv_data->tx += 4; - while (bfin_read(&drv_data->regs->status) & SPI_STAT_RFE) + while (ioread32(&drv_data->regs->status) & SPI_STAT_RFE) cpu_relax(); - *(u32 *)drv_data->rx = bfin_read(&drv_data->regs->rfifo); + *(u32 *)drv_data->rx = ioread32(&drv_data->regs->rfifo); drv_data->rx += 4; } } -static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u32 = { - .write = bfin_spi_u32_write, - .read = bfin_spi_u32_read, - .duplex = bfin_spi_u32_duplex, +static const struct adi_spi_transfer_ops adi_spi_transfer_ops_u32 = { + .write = adi_spi_u32_write, + .read = adi_spi_u32_read, + .duplex = adi_spi_u32_duplex, }; /* test if there is more transfer to be done */ -static void bfin_spi_next_transfer(struct bfin_spi_master *drv) +static void adi_spi_next_transfer(struct adi_spi_master *drv) { struct spi_message *msg = drv->cur_msg; struct spi_transfer *t = drv->cur_transfer; @@ -360,15 +381,15 @@ static void bfin_spi_next_transfer(struct bfin_spi_master *drv) } } -static void bfin_spi_giveback(struct bfin_spi_master *drv_data) +static void adi_spi_giveback(struct adi_spi_master *drv_data) { - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; - bfin_spi_cs_deactive(drv_data, chip); + adi_spi_cs_deactive(drv_data, chip); spi_finalize_current_message(drv_data->master); } -static int bfin_spi_setup_transfer(struct bfin_spi_master *drv) +static int adi_spi_setup_transfer(struct adi_spi_master *drv) { struct spi_transfer *t = drv->cur_transfer; u32 cr, cr_width; @@ -393,34 +414,33 @@ static int bfin_spi_setup_transfer(struct bfin_spi_master *drv) switch (t->bits_per_word) { case 8: cr_width = SPI_CTL_SIZE08; - drv->ops = &bfin_bfin_spi_transfer_ops_u8; + drv->ops = &adi_spi_transfer_ops_u8; break; case 16: cr_width = SPI_CTL_SIZE16; - drv->ops = &bfin_bfin_spi_transfer_ops_u16; + drv->ops = &adi_spi_transfer_ops_u16; break; case 32: cr_width = SPI_CTL_SIZE32; - drv->ops = &bfin_bfin_spi_transfer_ops_u32; + drv->ops = &adi_spi_transfer_ops_u32; break; default: return -EINVAL; } - cr = bfin_read(&drv->regs->control) & ~SPI_CTL_SIZE; + cr = ioread32(&drv->regs->control) & ~SPI_CTL_SIZE; cr |= cr_width; - bfin_write(&drv->regs->control, cr); + iowrite32(cr, &drv->regs->control); /* speed setup */ - bfin_write(&drv->regs->clock, - hz_to_spi_clock(drv->sclk, t->speed_hz)); + iowrite32(hz_to_spi_clock(drv->sclk, t->speed_hz), &drv->regs->clock); return 0; } -static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data) +static int adi_spi_dma_xfer(struct adi_spi_master *drv_data) { struct spi_transfer *t = drv_data->cur_transfer; struct spi_message *msg = drv_data->cur_msg; - struct bfin_spi_device *chip = drv_data->cur_chip; + struct adi_spi_device *chip = drv_data->cur_chip; u32 dma_config; unsigned long word_count, word_size; void *tx_buf, *rx_buf; @@ -498,17 +518,16 @@ static int bfin_spi_dma_xfer(struct bfin_spi_master *drv_data) set_dma_config(drv_data->rx_dma, dma_config | WNR); enable_dma(drv_data->tx_dma); enable_dma(drv_data->rx_dma); - SSYNC(); - bfin_write(&drv_data->regs->rx_control, SPI_RXCTL_REN | SPI_RXCTL_RDR_NE); - SSYNC(); - bfin_write(&drv_data->regs->tx_control, - SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF); + iowrite32(SPI_RXCTL_REN | SPI_RXCTL_RDR_NE, + &drv_data->regs->rx_control); + iowrite32(SPI_TXCTL_TEN | SPI_TXCTL_TTI | SPI_TXCTL_TDR_NF, + &drv_data->regs->tx_control); return 0; } -static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data) +static int adi_spi_pio_xfer(struct adi_spi_master *drv_data) { struct spi_message *msg = drv_data->cur_msg; @@ -529,19 +548,19 @@ static int bfin_spi_pio_xfer(struct bfin_spi_master *drv_data) return -EIO; } - if (!bfin_spi_flush(drv_data)) + if (!adi_spi_flush(drv_data)) return -EIO; msg->actual_length += drv_data->transfer_len; tasklet_schedule(&drv_data->pump_transfers); return 0; } -static void bfin_spi_pump_transfers(unsigned long data) +static void adi_spi_pump_transfers(unsigned long data) { - struct bfin_spi_master *drv_data = (struct bfin_spi_master *)data; + struct adi_spi_master *drv_data = (struct adi_spi_master *)data; struct spi_message *msg = NULL; struct spi_transfer *t = NULL; - struct bfin_spi_device *chip = NULL; + struct adi_spi_device *chip = NULL; int ret; /* Get current state information */ @@ -552,7 +571,7 @@ static void bfin_spi_pump_transfers(unsigned long data) /* Handle for abort */ if (drv_data->state == ERROR_STATE) { msg->status = -EIO; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); return; } @@ -560,14 +579,14 @@ static void bfin_spi_pump_transfers(unsigned long data) if (t->delay_usecs) udelay(t->delay_usecs); if (t->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - bfin_spi_next_transfer(drv_data); + adi_spi_cs_deactive(drv_data, chip); + adi_spi_next_transfer(drv_data); t = drv_data->cur_transfer; } /* Handle end of message */ if (drv_data->state == DONE_STATE) { msg->status = 0; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); return; } @@ -577,34 +596,34 @@ static void bfin_spi_pump_transfers(unsigned long data) return; } - ret = bfin_spi_setup_transfer(drv_data); + ret = adi_spi_setup_transfer(drv_data); if (ret) { msg->status = ret; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); } - bfin_write(&drv_data->regs->status, 0xFFFFFFFF); - bfin_spi_cs_active(drv_data, chip); + iowrite32(0xFFFFFFFF, &drv_data->regs->status); + adi_spi_cs_active(drv_data, chip); drv_data->state = RUNNING_STATE; if (chip->enable_dma) - ret = bfin_spi_dma_xfer(drv_data); + ret = adi_spi_dma_xfer(drv_data); else - ret = bfin_spi_pio_xfer(drv_data); + ret = adi_spi_pio_xfer(drv_data); if (ret) { msg->status = ret; - bfin_spi_giveback(drv_data); + adi_spi_giveback(drv_data); } } -static int bfin_spi_transfer_one_message(struct spi_master *master, +static int adi_spi_transfer_one_message(struct spi_master *master, struct spi_message *m) { - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); drv_data->cur_msg = m; drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); - bfin_spi_restore_state(drv_data); + adi_spi_restore_state(drv_data); drv_data->state = START_STATE; drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, @@ -630,15 +649,15 @@ static const u16 ssel[][MAX_SPI_SSEL] = { P_SPI2_SSEL6, P_SPI2_SSEL7}, }; -static int bfin_spi_setup(struct spi_device *spi) +static int adi_spi_setup(struct spi_device *spi) { - struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master); - struct bfin_spi_device *chip = spi_get_ctldata(spi); - u32 bfin_ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE; + struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master); + struct adi_spi_device *chip = spi_get_ctldata(spi); + u32 ctl_reg = SPI_CTL_ODM | SPI_CTL_PSSE; int ret = -EINVAL; if (!chip) { - struct bfin_spi3_chip *chip_info = spi->controller_data; + struct adi_spi3_chip *chip_info = spi->controller_data; chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (!chip) { @@ -646,7 +665,7 @@ static int bfin_spi_setup(struct spi_device *spi) return -ENOMEM; } if (chip_info) { - if (chip_info->control & ~bfin_ctl_reg) { + if (chip_info->control & ~ctl_reg) { dev_err(&spi->dev, "do not set bits that the SPI framework manages\n"); goto error; @@ -657,6 +676,7 @@ static int bfin_spi_setup(struct spi_device *spi) chip->enable_dma = chip_info->enable_dma; } chip->cs = spi->chip_select; + if (chip->cs < MAX_CTRL_CS) { chip->ssel = (1 << chip->cs) << 8; ret = peripheral_request(ssel[spi->master->bus_num] @@ -678,7 +698,7 @@ static int bfin_spi_setup(struct spi_device *spi) } /* force a default base state */ - chip->control &= bfin_ctl_reg; + chip->control &= ctl_reg; if (spi->mode & SPI_CPOL) chip->control |= SPI_CTL_CPOL; @@ -692,8 +712,8 @@ static int bfin_spi_setup(struct spi_device *spi) chip->clock = hz_to_spi_clock(drv_data->sclk, spi->max_speed_hz); - bfin_spi_cs_enable(drv_data, chip); - bfin_spi_cs_deactive(drv_data, chip); + adi_spi_cs_enable(drv_data, chip); + adi_spi_cs_deactive(drv_data, chip); return 0; error: @@ -705,10 +725,10 @@ error: return ret; } -static void bfin_spi_cleanup(struct spi_device *spi) +static void adi_spi_cleanup(struct spi_device *spi) { - struct bfin_spi_device *chip = spi_get_ctldata(spi); - struct bfin_spi_master *drv_data = spi_master_get_devdata(spi->master); + struct adi_spi_device *chip = spi_get_ctldata(spi); + struct adi_spi_master *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; @@ -716,7 +736,7 @@ static void bfin_spi_cleanup(struct spi_device *spi) if (chip->cs < MAX_CTRL_CS) { peripheral_free(ssel[spi->master->bus_num] [chip->cs-1]); - bfin_spi_cs_disable(drv_data, chip); + adi_spi_cs_disable(drv_data, chip); } else { gpio_free(chip->cs_gpio); } @@ -725,10 +745,11 @@ static void bfin_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } -static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id) +static irqreturn_t adi_spi_tx_dma_isr(int irq, void *dev_id) { - struct bfin_spi_master *drv_data = dev_id; + struct adi_spi_master *drv_data = dev_id; u32 dma_stat = get_dma_curr_irqstat(drv_data->tx_dma); + u32 tx_ctl; clear_dma_irqstat(drv_data->tx_dma); if (dma_stat & DMA_DONE) { @@ -739,13 +760,15 @@ static irqreturn_t bfin_spi_tx_dma_isr(int irq, void *dev_id) if (drv_data->tx) drv_data->state = ERROR_STATE; } - bfin_write_and(&drv_data->regs->tx_control, ~SPI_TXCTL_TDR_NF); + tx_ctl = ioread32(&drv_data->regs->tx_control); + tx_ctl &= ~SPI_TXCTL_TDR_NF; + iowrite32(tx_ctl, &drv_data->regs->tx_control); return IRQ_HANDLED; } -static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) +static irqreturn_t adi_spi_rx_dma_isr(int irq, void *dev_id) { - struct bfin_spi_master *drv_data = dev_id; + struct adi_spi_master *drv_data = dev_id; struct spi_message *msg = drv_data->cur_msg; u32 dma_stat = get_dma_curr_irqstat(drv_data->rx_dma); @@ -760,8 +783,8 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) dev_err(&drv_data->master->dev, "spi rx dma error: %d\n", dma_stat); } - bfin_write(&drv_data->regs->tx_control, 0); - bfin_write(&drv_data->regs->rx_control, 0); + iowrite32(0, &drv_data->regs->tx_control); + iowrite32(0, &drv_data->regs->rx_control); if (drv_data->rx_num != drv_data->tx_num) dev_dbg(&drv_data->master->dev, "dma interrupt missing: tx=%d,rx=%d\n", @@ -770,15 +793,15 @@ static irqreturn_t bfin_spi_rx_dma_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int bfin_spi_probe(struct platform_device *pdev) +static int adi_spi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct bfin_spi3_master *info = dev_get_platdata(dev); + struct adi_spi3_master *info = dev_get_platdata(dev); struct spi_master *master; - struct bfin_spi_master *drv_data; + struct adi_spi_master *drv_data; struct resource *mem, *res; unsigned int tx_dma, rx_dma; - unsigned long sclk; + struct clk *sclk; int ret; if (!info) { @@ -786,10 +809,10 @@ static int bfin_spi_probe(struct platform_device *pdev) return -ENODEV; } - sclk = get_sclk1(); - if (!sclk) { - dev_err(dev, "can not get sclk1\n"); - return -ENXIO; + sclk = devm_clk_get(dev, "spi"); + if (IS_ERR(sclk)) { + dev_err(dev, "can not get spi clock\n"); + return PTR_ERR(sclk); } res = platform_get_resource(pdev, IORESOURCE_DMA, 0); @@ -819,9 +842,9 @@ static int bfin_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = info->num_chipselect; - master->cleanup = bfin_spi_cleanup; - master->setup = bfin_spi_setup; - master->transfer_one_message = bfin_spi_transfer_one_message; + master->cleanup = adi_spi_cleanup; + master->setup = adi_spi_setup; + master->transfer_one_message = adi_spi_transfer_one_message; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); @@ -830,7 +853,7 @@ static int bfin_spi_probe(struct platform_device *pdev) drv_data->tx_dma = tx_dma; drv_data->rx_dma = rx_dma; drv_data->pin_req = info->pin_req; - drv_data->sclk = sclk; + drv_data->sclk = clk_get_rate(sclk); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); drv_data->regs = devm_ioremap_resource(dev, mem); @@ -845,28 +868,28 @@ static int bfin_spi_probe(struct platform_device *pdev) dev_err(dev, "can not request SPI TX DMA channel\n"); goto err_put_master; } - set_dma_callback(tx_dma, bfin_spi_tx_dma_isr, drv_data); + set_dma_callback(tx_dma, adi_spi_tx_dma_isr, drv_data); ret = request_dma(rx_dma, "SPI_RX_DMA"); if (ret) { dev_err(dev, "can not request SPI RX DMA channel\n"); goto err_free_tx_dma; } - set_dma_callback(drv_data->rx_dma, bfin_spi_rx_dma_isr, drv_data); + set_dma_callback(drv_data->rx_dma, adi_spi_rx_dma_isr, drv_data); /* request CLK, MOSI and MISO */ - ret = peripheral_request_list(drv_data->pin_req, "bfin-spi3"); + ret = peripheral_request_list(drv_data->pin_req, "adi-spi3"); if (ret < 0) { dev_err(dev, "can not request spi pins\n"); goto err_free_rx_dma; } - bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA); - bfin_write(&drv_data->regs->ssel, 0x0000FE00); - bfin_write(&drv_data->regs->delay, 0x0); + iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control); + iowrite32(0x0000FE00, &drv_data->regs->ssel); + iowrite32(0x0, &drv_data->regs->delay); tasklet_init(&drv_data->pump_transfers, - bfin_spi_pump_transfers, (unsigned long)drv_data); + adi_spi_pump_transfers, (unsigned long)drv_data); /* register with the SPI framework */ ret = devm_spi_register_master(dev, master); if (ret) { @@ -888,43 +911,41 @@ err_put_master: return ret; } -static int bfin_spi_remove(struct platform_device *pdev) +static int adi_spi_remove(struct platform_device *pdev) { struct spi_master *master = platform_get_drvdata(pdev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); - - bfin_spi_disable(drv_data); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); + adi_spi_disable(drv_data); peripheral_free_list(drv_data->pin_req); free_dma(drv_data->rx_dma); free_dma(drv_data->tx_dma); - return 0; } #ifdef CONFIG_PM -static int bfin_spi_suspend(struct device *dev) +static int adi_spi_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); spi_master_suspend(master); - drv_data->control = bfin_read(&drv_data->regs->control); - drv_data->ssel = bfin_read(&drv_data->regs->ssel); + drv_data->control = ioread32(&drv_data->regs->control); + drv_data->ssel = ioread32(&drv_data->regs->ssel); - bfin_write(&drv_data->regs->control, SPI_CTL_MSTR | SPI_CTL_CPHA); - bfin_write(&drv_data->regs->ssel, 0x0000FE00); + iowrite32(SPI_CTL_MSTR | SPI_CTL_CPHA, &drv_data->regs->control); + iowrite32(0x0000FE00, &drv_data->regs->ssel); dma_disable_irq(drv_data->rx_dma); dma_disable_irq(drv_data->tx_dma); return 0; } -static int bfin_spi_resume(struct device *dev) +static int adi_spi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); - struct bfin_spi_master *drv_data = spi_master_get_devdata(master); + struct adi_spi_master *drv_data = spi_master_get_devdata(master); int ret = 0; /* bootrom may modify spi and dma status when resume in spi boot mode */ @@ -932,8 +953,8 @@ static int bfin_spi_resume(struct device *dev) dma_enable_irq(drv_data->rx_dma); dma_enable_irq(drv_data->tx_dma); - bfin_write(&drv_data->regs->control, drv_data->control); - bfin_write(&drv_data->regs->ssel, drv_data->ssel); + iowrite32(drv_data->control, &drv_data->regs->control); + iowrite32(drv_data->ssel, &drv_data->regs->ssel); ret = spi_master_resume(master); if (ret) { @@ -944,21 +965,21 @@ static int bfin_spi_resume(struct device *dev) return ret; } #endif -static const struct dev_pm_ops bfin_spi_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(bfin_spi_suspend, bfin_spi_resume) +static const struct dev_pm_ops adi_spi_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(adi_spi_suspend, adi_spi_resume) }; -MODULE_ALIAS("platform:bfin-spi3"); -static struct platform_driver bfin_spi_driver = { +MODULE_ALIAS("platform:adi-spi3"); +static struct platform_driver adi_spi_driver = { .driver = { - .name = "bfin-spi3", + .name = "adi-spi3", .owner = THIS_MODULE, - .pm = &bfin_spi_pm_ops, + .pm = &adi_spi_pm_ops, }, - .remove = bfin_spi_remove, + .remove = adi_spi_remove, }; -module_platform_driver_probe(bfin_spi_driver, bfin_spi_probe); +module_platform_driver_probe(adi_spi_driver, adi_spi_probe); MODULE_DESCRIPTION("Analog Devices SPI3 controller driver"); MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 3898b0b9ee7..058db0fe8dc 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/spinlock.h> -#include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 079e6b1b0cd..92a6f0d9323 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -224,7 +224,7 @@ struct atmel_spi { struct platform_device *pdev; struct spi_transfer *current_transfer; - unsigned long current_remaining_bytes; + int current_remaining_bytes; int done_status; struct completion xfer_completion; @@ -874,8 +874,9 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer) spi_readl(as, RDR); } if (xfer->bits_per_word > 8) { - as->current_remaining_bytes -= 2; - if (as->current_remaining_bytes < 0) + if (as->current_remaining_bytes > 2) + as->current_remaining_bytes -= 2; + else as->current_remaining_bytes = 0; } else { as->current_remaining_bytes--; @@ -1110,6 +1111,8 @@ static int atmel_spi_one_transfer(struct spi_master *master, atmel_spi_next_xfer_pio(master, xfer); } else { as->current_remaining_bytes -= len; + if (as->current_remaining_bytes < 0) + as->current_remaining_bytes = 0; } } else { atmel_spi_next_xfer_pio(master, xfer); diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index 5a211e98383..86f5a98aa7a 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/spi/spi.h> -#include <linux/workqueue.h> #include <linux/mutex.h> #define HSSPI_GLOBAL_CTRL_REG 0x0 diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 0250fa721ce..8510400e786 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -29,7 +29,6 @@ #include <linux/spi/spi.h> #include <linux/completion.h> #include <linux/err.h> -#include <linux/workqueue.h> #include <linux/pm_runtime.h> #include <bcm63xx_dev_spi.h> diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c new file mode 100644 index 00000000000..bb758978465 --- /dev/null +++ b/drivers/spi/spi-cadence.c @@ -0,0 +1,673 @@ +/* + * Cadence SPI controller driver (master mode only) + * + * Copyright (C) 2008 - 2014 Xilinx, Inc. + * + * based on Blackfin On-Chip SPI Driver (spi_bfin5xx.c) + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +/* Name of this driver */ +#define CDNS_SPI_NAME "cdns-spi" + +/* Register offset definitions */ +#define CDNS_SPI_CR_OFFSET 0x00 /* Configuration Register, RW */ +#define CDNS_SPI_ISR_OFFSET 0x04 /* Interrupt Status Register, RO */ +#define CDNS_SPI_IER_OFFSET 0x08 /* Interrupt Enable Register, WO */ +#define CDNS_SPI_IDR_OFFSET 0x0c /* Interrupt Disable Register, WO */ +#define CDNS_SPI_IMR_OFFSET 0x10 /* Interrupt Enabled Mask Register, RO */ +#define CDNS_SPI_ER_OFFSET 0x14 /* Enable/Disable Register, RW */ +#define CDNS_SPI_DR_OFFSET 0x18 /* Delay Register, RW */ +#define CDNS_SPI_TXD_OFFSET 0x1C /* Data Transmit Register, WO */ +#define CDNS_SPI_RXD_OFFSET 0x20 /* Data Receive Register, RO */ +#define CDNS_SPI_SICR_OFFSET 0x24 /* Slave Idle Count Register, RW */ +#define CDNS_SPI_THLD_OFFSET 0x28 /* Transmit FIFO Watermark Register,RW */ + +/* + * SPI Configuration Register bit Masks + * + * This register contains various control bits that affect the operation + * of the SPI controller + */ +#define CDNS_SPI_CR_MANSTRT_MASK 0x00010000 /* Manual TX Start */ +#define CDNS_SPI_CR_CPHA_MASK 0x00000004 /* Clock Phase Control */ +#define CDNS_SPI_CR_CPOL_MASK 0x00000002 /* Clock Polarity Control */ +#define CDNS_SPI_CR_SSCTRL_MASK 0x00003C00 /* Slave Select Mask */ +#define CDNS_SPI_CR_BAUD_DIV_MASK 0x00000038 /* Baud Rate Divisor Mask */ +#define CDNS_SPI_CR_MSTREN_MASK 0x00000001 /* Master Enable Mask */ +#define CDNS_SPI_CR_MANSTRTEN_MASK 0x00008000 /* Manual TX Enable Mask */ +#define CDNS_SPI_CR_SSFORCE_MASK 0x00004000 /* Manual SS Enable Mask */ +#define CDNS_SPI_CR_BAUD_DIV_4_MASK 0x00000008 /* Default Baud Div Mask */ +#define CDNS_SPI_CR_DEFAULT_MASK (CDNS_SPI_CR_MSTREN_MASK | \ + CDNS_SPI_CR_SSCTRL_MASK | \ + CDNS_SPI_CR_SSFORCE_MASK | \ + CDNS_SPI_CR_BAUD_DIV_4_MASK) + +/* + * SPI Configuration Register - Baud rate and slave select + * + * These are the values used in the calculation of baud rate divisor and + * setting the slave select. + */ + +#define CDNS_SPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */ +#define CDNS_SPI_BAUD_DIV_MIN 1 /* Baud rate divisor minimum */ +#define CDNS_SPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ +#define CDNS_SPI_SS_SHIFT 10 /* Slave Select field shift in CR */ +#define CDNS_SPI_SS0 0x1 /* Slave Select zero */ + +/* + * SPI Interrupt Registers bit Masks + * + * All the four interrupt registers (Status/Mask/Enable/Disable) have the same + * bit definitions. + */ +#define CDNS_SPI_IXR_TXOW_MASK 0x00000004 /* SPI TX FIFO Overwater */ +#define CDNS_SPI_IXR_MODF_MASK 0x00000002 /* SPI Mode Fault */ +#define CDNS_SPI_IXR_RXNEMTY_MASK 0x00000010 /* SPI RX FIFO Not Empty */ +#define CDNS_SPI_IXR_DEFAULT_MASK (CDNS_SPI_IXR_TXOW_MASK | \ + CDNS_SPI_IXR_MODF_MASK) +#define CDNS_SPI_IXR_TXFULL_MASK 0x00000008 /* SPI TX Full */ +#define CDNS_SPI_IXR_ALL_MASK 0x0000007F /* SPI all interrupts */ + +/* + * SPI Enable Register bit Masks + * + * This register is used to enable or disable the SPI controller + */ +#define CDNS_SPI_ER_ENABLE_MASK 0x00000001 /* SPI Enable Bit Mask */ +#define CDNS_SPI_ER_DISABLE_MASK 0x0 /* SPI Disable Bit Mask */ + +/* SPI FIFO depth in bytes */ +#define CDNS_SPI_FIFO_DEPTH 128 + +/* Default number of chip select lines */ +#define CDNS_SPI_DEFAULT_NUM_CS 4 + +/** + * struct cdns_spi - This definition defines spi driver instance + * @regs: Virtual address of the SPI controller registers + * @ref_clk: Pointer to the peripheral clock + * @pclk: Pointer to the APB clock + * @speed_hz: Current SPI bus clock speed in Hz + * @txbuf: Pointer to the TX buffer + * @rxbuf: Pointer to the RX buffer + * @tx_bytes: Number of bytes left to transfer + * @rx_bytes: Number of bytes requested + * @dev_busy: Device busy flag + * @is_decoded_cs: Flag for decoder property set or not + */ +struct cdns_spi { + void __iomem *regs; + struct clk *ref_clk; + struct clk *pclk; + u32 speed_hz; + const u8 *txbuf; + u8 *rxbuf; + int tx_bytes; + int rx_bytes; + u8 dev_busy; + u32 is_decoded_cs; +}; + +/* Macros for the SPI controller read/write */ +static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset) +{ + return readl_relaxed(xspi->regs + offset); +} + +static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val) +{ + writel_relaxed(val, xspi->regs + offset); +} + +/** + * cdns_spi_init_hw - Initialize the hardware and configure the SPI controller + * @xspi: Pointer to the cdns_spi structure + * + * On reset the SPI controller is configured to be in master mode, baud rate + * divisor is set to 4, threshold value for TX FIFO not full interrupt is set + * to 1 and size of the word to be transferred as 8 bit. + * This function initializes the SPI controller to disable and clear all the + * interrupts, enable manual slave select and manual start, deselect all the + * chip select lines, and enable the SPI controller. + */ +static void cdns_spi_init_hw(struct cdns_spi *xspi) +{ + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_ALL_MASK); + + /* Clear the RX FIFO */ + while (cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET) & + CDNS_SPI_IXR_RXNEMTY_MASK) + cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET); + + cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, + CDNS_SPI_IXR_ALL_MASK); + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, + CDNS_SPI_CR_DEFAULT_MASK); + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_ENABLE_MASK); +} + +/** + * cdns_spi_chipselect - Select or deselect the chip select line + * @spi: Pointer to the spi_device structure + * @is_on: Select(0) or deselect (1) the chip select line + */ +static void cdns_spi_chipselect(struct spi_device *spi, bool is_high) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg; + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + if (is_high) { + /* Deselect the slave */ + ctrl_reg |= CDNS_SPI_CR_SSCTRL_MASK; + } else { + /* Select the slave */ + ctrl_reg &= ~CDNS_SPI_CR_SSCTRL_MASK; + if (!(xspi->is_decoded_cs)) + ctrl_reg |= ((~(CDNS_SPI_SS0 << spi->chip_select)) << + CDNS_SPI_SS_SHIFT) & + CDNS_SPI_CR_SSCTRL_MASK; + else + ctrl_reg |= (spi->chip_select << CDNS_SPI_SS_SHIFT) & + CDNS_SPI_CR_SSCTRL_MASK; + } + + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_config_clock_mode - Sets clock polarity and phase + * @spi: Pointer to the spi_device structure + * + * Sets the requested clock polarity and phase. + */ +static void cdns_spi_config_clock_mode(struct spi_device *spi) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg; + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + /* Set the SPI clock phase and clock polarity */ + ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK); + if (spi->mode & SPI_CPHA) + ctrl_reg |= CDNS_SPI_CR_CPHA_MASK; + if (spi->mode & SPI_CPOL) + ctrl_reg |= CDNS_SPI_CR_CPOL_MASK; + + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_config_clock_freq - Sets clock frequency + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer setup parameters + * + * Sets the requested clock frequency. + * Note: If the requested frequency is not an exact match with what can be + * obtained using the prescalar value the driver sets the clock frequency which + * is lower than the requested frequency (maximum lower) for the transfer. If + * the requested frequency is higher or lower than that is supported by the SPI + * controller the driver will set the highest or lowest frequency supported by + * controller. + */ +static void cdns_spi_config_clock_freq(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + u32 ctrl_reg, baud_rate_val; + unsigned long frequency; + + frequency = clk_get_rate(xspi->ref_clk); + + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + + /* Set the clock frequency */ + if (xspi->speed_hz != transfer->speed_hz) { + /* first valid value is 1 */ + baud_rate_val = CDNS_SPI_BAUD_DIV_MIN; + while ((baud_rate_val < CDNS_SPI_BAUD_DIV_MAX) && + (frequency / (2 << baud_rate_val)) > transfer->speed_hz) + baud_rate_val++; + + ctrl_reg &= ~CDNS_SPI_CR_BAUD_DIV_MASK; + ctrl_reg |= baud_rate_val << CDNS_SPI_BAUD_DIV_SHIFT; + + xspi->speed_hz = frequency / (2 << baud_rate_val); + } + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); +} + +/** + * cdns_spi_setup_transfer - Configure SPI controller for specified transfer + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer setup parameters + * + * Sets the operational mode of SPI controller for the next SPI transfer and + * sets the requested clock frequency. + * + * Return: Always 0 + */ +static int cdns_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(spi->master); + + cdns_spi_config_clock_freq(spi, transfer); + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u clock speed\n", + __func__, spi->mode, spi->bits_per_word, + xspi->speed_hz); + + return 0; +} + +/** + * cdns_spi_fill_tx_fifo - Fills the TX FIFO with as many bytes as possible + * @xspi: Pointer to the cdns_spi structure + */ +static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi) +{ + unsigned long trans_cnt = 0; + + while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) && + (xspi->tx_bytes > 0)) { + if (xspi->txbuf) + cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, + *xspi->txbuf++); + else + cdns_spi_write(xspi, CDNS_SPI_TXD_OFFSET, 0); + + xspi->tx_bytes--; + trans_cnt++; + } +} + +/** + * cdns_spi_irq - Interrupt service routine of the SPI controller + * @irq: IRQ number + * @dev_id: Pointer to the xspi structure + * + * This function handles TX empty and Mode Fault interrupts only. + * On TX empty interrupt this function reads the received data from RX FIFO and + * fills the TX FIFO if there is any data remaining to be transferred. + * On Mode Fault interrupt this function indicates that transfer is completed, + * the SPI subsystem will identify the error as the remaining bytes to be + * transferred is non-zero. + * + * Return: IRQ_HANDLED when handled; IRQ_NONE otherwise. + */ +static irqreturn_t cdns_spi_irq(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct cdns_spi *xspi = spi_master_get_devdata(master); + u32 intr_status, status; + + status = IRQ_NONE; + intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR_OFFSET); + cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, intr_status); + + if (intr_status & CDNS_SPI_IXR_MODF_MASK) { + /* Indicate that transfer is completed, the SPI subsystem will + * identify the error as the remaining bytes to be + * transferred is non-zero + */ + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + spi_finalize_current_transfer(master); + status = IRQ_HANDLED; + } else if (intr_status & CDNS_SPI_IXR_TXOW_MASK) { + unsigned long trans_cnt; + + trans_cnt = xspi->rx_bytes - xspi->tx_bytes; + + /* Read out the data from the RX FIFO */ + while (trans_cnt) { + u8 data; + + data = cdns_spi_read(xspi, CDNS_SPI_RXD_OFFSET); + if (xspi->rxbuf) + *xspi->rxbuf++ = data; + + xspi->rx_bytes--; + trans_cnt--; + } + + if (xspi->tx_bytes) { + /* There is more data to send */ + cdns_spi_fill_tx_fifo(xspi); + } else { + /* Transfer is completed */ + cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + spi_finalize_current_transfer(master); + } + status = IRQ_HANDLED; + } + + return status; +} + +/** + * cdns_transfer_one - Initiates the SPI transfer + * @master: Pointer to spi_master structure + * @spi: Pointer to the spi_device structure + * @transfer: Pointer to the spi_transfer structure which provides + * information about next transfer parameters + * + * This function fills the TX FIFO, starts the SPI transfer and + * returns a positive transfer count so that core will wait for completion. + * + * Return: Number of bytes transferred in the last transfer + */ +static int cdns_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + xspi->txbuf = transfer->tx_buf; + xspi->rxbuf = transfer->rx_buf; + xspi->tx_bytes = transfer->len; + xspi->rx_bytes = transfer->len; + + cdns_spi_setup_transfer(spi, transfer); + + cdns_spi_fill_tx_fifo(xspi); + + cdns_spi_write(xspi, CDNS_SPI_IER_OFFSET, + CDNS_SPI_IXR_DEFAULT_MASK); + return transfer->len; +} + +/** + * cdns_prepare_transfer_hardware - Prepares hardware for transfer. + * @master: Pointer to the spi_master structure which provides + * information about the controller. + * + * This function enables SPI master controller. + * + * Return: 0 always + */ +static int cdns_prepare_transfer_hardware(struct spi_master *master) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_config_clock_mode(master->cur_msg->spi); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_ENABLE_MASK); + + return 0; +} + +/** + * cdns_unprepare_transfer_hardware - Relaxes hardware after transfer + * @master: Pointer to the spi_master structure which provides + * information about the controller. + * + * This function disables the SPI master controller. + * + * Return: 0 always + */ +static int cdns_unprepare_transfer_hardware(struct spi_master *master) +{ + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + + return 0; +} + +/** + * cdns_spi_probe - Probe method for the SPI driver + * @pdev: Pointer to the platform_device structure + * + * This function initializes the driver data structures and the hardware. + * + * Return: 0 on success and error value on error + */ +static int cdns_spi_probe(struct platform_device *pdev) +{ + int ret = 0, irq; + struct spi_master *master; + struct cdns_spi *xspi; + struct resource *res; + u32 num_cs; + + master = spi_alloc_master(&pdev->dev, sizeof(*xspi)); + if (master == NULL) + return -ENOMEM; + + xspi = spi_master_get_devdata(master); + master->dev.of_node = pdev->dev.of_node; + platform_set_drvdata(pdev, master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xspi->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(xspi->regs)) { + ret = PTR_ERR(xspi->regs); + goto remove_master; + } + + xspi->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(xspi->pclk)) { + dev_err(&pdev->dev, "pclk clock not found.\n"); + ret = PTR_ERR(xspi->pclk); + goto remove_master; + } + + xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk"); + if (IS_ERR(xspi->ref_clk)) { + dev_err(&pdev->dev, "ref_clk clock not found.\n"); + ret = PTR_ERR(xspi->ref_clk); + goto remove_master; + } + + ret = clk_prepare_enable(xspi->pclk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable APB clock.\n"); + goto remove_master; + } + + ret = clk_prepare_enable(xspi->ref_clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable device clock.\n"); + goto clk_dis_apb; + } + + /* SPI controller initializations */ + cdns_spi_init_hw(xspi); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "irq number is invalid\n"); + goto remove_master; + } + + ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq, + 0, pdev->name, master); + if (ret != 0) { + ret = -ENXIO; + dev_err(&pdev->dev, "request_irq failed\n"); + goto remove_master; + } + + ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); + + if (ret < 0) + master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS; + else + master->num_chipselect = num_cs; + + ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs", + &xspi->is_decoded_cs); + + if (ret < 0) + xspi->is_decoded_cs = 0; + + master->prepare_transfer_hardware = cdns_prepare_transfer_hardware; + master->transfer_one = cdns_transfer_one; + master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware; + master->set_cs = cdns_spi_chipselect; + master->mode_bits = SPI_CPOL | SPI_CPHA; + + /* Set to default valid value */ + master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4; + xspi->speed_hz = master->max_speed_hz; + + master->bits_per_word_mask = SPI_BPW_MASK(8); + + ret = spi_register_master(master); + if (ret) { + dev_err(&pdev->dev, "spi_register_master failed\n"); + goto clk_dis_all; + } + + return ret; + +clk_dis_all: + clk_disable_unprepare(xspi->ref_clk); +clk_dis_apb: + clk_disable_unprepare(xspi->pclk); +remove_master: + spi_master_put(master); + return ret; +} + +/** + * cdns_spi_remove - Remove method for the SPI driver + * @pdev: Pointer to the platform_device structure + * + * This function is called if a device is physically removed from the system or + * if the driver module is being unloaded. It frees all resources allocated to + * the device. + * + * Return: 0 on success and error value on error + */ +static int cdns_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + + clk_disable_unprepare(xspi->ref_clk); + clk_disable_unprepare(xspi->pclk); + + spi_unregister_master(master); + + return 0; +} + +/** + * cdns_spi_suspend - Suspend method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function disables the SPI controller and + * changes the driver state to "suspend" + * + * Return: Always 0 + */ +static int __maybe_unused cdns_spi_suspend(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + + spi_master_suspend(master); + + clk_disable_unprepare(xspi->ref_clk); + + clk_disable_unprepare(xspi->pclk); + + return 0; +} + +/** + * cdns_spi_resume - Resume method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function changes the driver state to "ready" + * + * Return: 0 on success and error value on error + */ +static int __maybe_unused cdns_spi_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct cdns_spi *xspi = spi_master_get_devdata(master); + int ret = 0; + + ret = clk_prepare_enable(xspi->pclk); + if (ret) { + dev_err(dev, "Cannot enable APB clock.\n"); + return ret; + } + + ret = clk_prepare_enable(xspi->ref_clk); + if (ret) { + dev_err(dev, "Cannot enable device clock.\n"); + clk_disable(xspi->pclk); + return ret; + } + spi_master_resume(master); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend, + cdns_spi_resume); + +static struct of_device_id cdns_spi_of_match[] = { + { .compatible = "xlnx,zynq-spi-r1p6" }, + { .compatible = "cdns,spi-r1p6" }, + { /* end of table */ } +}; +MODULE_DEVICE_TABLE(of, cdns_spi_of_match); + +/* cdns_spi_driver - This structure defines the SPI subsystem platform driver */ +static struct platform_driver cdns_spi_driver = { + .probe = cdns_spi_probe, + .remove = cdns_spi_remove, + .driver = { + .name = CDNS_SPI_NAME, + .owner = THIS_MODULE, + .of_match_table = cdns_spi_of_match, + .pm = &cdns_spi_dev_pm_ops, + }, +}; + +module_platform_driver(cdns_spi_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Cadence SPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 1492f5ee9aa..a5cba14ac3d 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -16,6 +16,7 @@ #include <linux/spi/spi.h> #include <linux/scatterlist.h> #include <linux/module.h> +#include <linux/of_gpio.h> #include "spi-dw.h" @@ -70,6 +71,27 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) dws->num_cs = 4; dws->max_freq = clk_get_rate(dwsmmio->clk); + if (pdev->dev.of_node) { + int i; + + for (i = 0; i < dws->num_cs; i++) { + int cs_gpio = of_get_named_gpio(pdev->dev.of_node, + "cs-gpios", i); + + if (cs_gpio == -EPROBE_DEFER) { + ret = cs_gpio; + goto out; + } + + if (gpio_is_valid(cs_gpio)) { + ret = devm_gpio_request(&pdev->dev, cs_gpio, + dev_name(&pdev->dev)); + if (ret) + goto out; + } + } + } + ret = dw_spi_add_host(&pdev->dev, dws); if (ret) goto out; diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 712ac5629cd..29f33143b79 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -24,6 +24,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/spi/spi.h> +#include <linux/gpio.h> #include "spi-dw.h" @@ -36,12 +37,6 @@ #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 - -#define MRST_SPI_DEASSERT 0 -#define MRST_SPI_ASSERT 1 - /* Slave spi_dev related */ struct chip_data { u16 cr0; @@ -263,28 +258,22 @@ static int map_dma_buffers(struct dw_spi *dws) static void giveback(struct dw_spi *dws) { struct spi_transfer *last_transfer; - unsigned long flags; struct spi_message *msg; - spin_lock_irqsave(&dws->lock, flags); msg = dws->cur_msg; dws->cur_msg = NULL; dws->cur_transfer = NULL; dws->prev_chip = dws->cur_chip; dws->cur_chip = NULL; dws->dma_mapped = 0; - queue_work(dws->workqueue, &dws->pump_messages); - spin_unlock_irqrestore(&dws->lock, flags); last_transfer = list_last_entry(&msg->transfers, struct spi_transfer, transfer_list); - if (!last_transfer->cs_change && dws->cs_control) - dws->cs_control(MRST_SPI_DEASSERT); + if (!last_transfer->cs_change) + spi_chip_sel(dws, dws->cur_msg->spi, 0); - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); + spi_finalize_current_message(dws->master); } static void int_error_stop(struct dw_spi *dws, const char *msg) @@ -502,7 +491,7 @@ static void pump_transfers(unsigned long data) dw_writew(dws, DW_SPI_CTRL0, cr0); spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi->chip_select); + spi_chip_sel(dws, spi, 1); /* Set the interrupt mask, for poll mode just disable all int */ spi_mask_intr(dws, 0xff); @@ -529,30 +518,12 @@ early_exit: return; } -static void pump_messages(struct work_struct *work) +static int dw_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) { - struct dw_spi *dws = - container_of(work, struct dw_spi, pump_messages); - unsigned long flags; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&dws->lock, flags); - if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { - dws->busy = 0; - spin_unlock_irqrestore(&dws->lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (dws->cur_msg) { - spin_unlock_irqrestore(&dws->lock, flags); - return; - } - - /* Extract head of queue */ - dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); - list_del_init(&dws->cur_msg->queue); + struct dw_spi *dws = spi_master_get_devdata(master); + dws->cur_msg = msg; /* Initial message state*/ dws->cur_msg->state = START_STATE; dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, @@ -560,46 +531,9 @@ static void pump_messages(struct work_struct *work) transfer_list); dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); - /* Mark as busy and launch transfers */ + /* Launch transfers */ tasklet_schedule(&dws->pump_transfers); - dws->busy = 1; - spin_unlock_irqrestore(&dws->lock, flags); -} - -/* spi_device use this to queue in their spi_msg */ -static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct dw_spi *dws = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&dws->lock, flags); - - if (dws->run == QUEUE_STOPPED) { - spin_unlock_irqrestore(&dws->lock, flags); - return -ESHUTDOWN; - } - - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = START_STATE; - - list_add_tail(&msg->queue, &dws->queue); - - if (dws->run == QUEUE_RUNNING && !dws->busy) { - - if (dws->cur_transfer || dws->cur_msg) - queue_work(dws->workqueue, - &dws->pump_messages); - else { - /* If no other data transaction in air, just go */ - spin_unlock_irqrestore(&dws->lock, flags); - pump_messages(&dws->pump_messages); - return 0; - } - } - - spin_unlock_irqrestore(&dws->lock, flags); return 0; } @@ -608,6 +542,7 @@ static int dw_spi_setup(struct spi_device *spi) { struct dw_spi_chip *chip_info = NULL; struct chip_data *chip; + int ret; /* Only alloc on first setup */ chip = spi_get_ctldata(spi); @@ -661,81 +596,13 @@ static int dw_spi_setup(struct spi_device *spi) | (spi->mode << SPI_MODE_OFFSET) | (chip->tmode << SPI_TMOD_OFFSET); - return 0; -} - -static int init_queue(struct dw_spi *dws) -{ - INIT_LIST_HEAD(&dws->queue); - spin_lock_init(&dws->lock); - - dws->run = QUEUE_STOPPED; - dws->busy = 0; - - tasklet_init(&dws->pump_transfers, - pump_transfers, (unsigned long)dws); - - INIT_WORK(&dws->pump_messages, pump_messages); - dws->workqueue = create_singlethread_workqueue( - dev_name(dws->master->dev.parent)); - if (dws->workqueue == NULL) - return -EBUSY; - - return 0; -} - -static int start_queue(struct dw_spi *dws) -{ - unsigned long flags; - - spin_lock_irqsave(&dws->lock, flags); - - if (dws->run == QUEUE_RUNNING || dws->busy) { - spin_unlock_irqrestore(&dws->lock, flags); - return -EBUSY; + if (gpio_is_valid(spi->cs_gpio)) { + ret = gpio_direction_output(spi->cs_gpio, + !(spi->mode & SPI_CS_HIGH)); + if (ret) + return ret; } - dws->run = QUEUE_RUNNING; - dws->cur_msg = NULL; - dws->cur_transfer = NULL; - dws->cur_chip = NULL; - dws->prev_chip = NULL; - spin_unlock_irqrestore(&dws->lock, flags); - - queue_work(dws->workqueue, &dws->pump_messages); - - return 0; -} - -static int stop_queue(struct dw_spi *dws) -{ - unsigned long flags; - unsigned limit = 50; - int status = 0; - - spin_lock_irqsave(&dws->lock, flags); - dws->run = QUEUE_STOPPED; - while ((!list_empty(&dws->queue) || dws->busy) && limit--) { - spin_unlock_irqrestore(&dws->lock, flags); - msleep(10); - spin_lock_irqsave(&dws->lock, flags); - } - - if (!list_empty(&dws->queue) || dws->busy) - status = -EBUSY; - spin_unlock_irqrestore(&dws->lock, flags); - - return status; -} - -static int destroy_queue(struct dw_spi *dws) -{ - int status; - - status = stop_queue(dws); - if (status != 0) - return status; - destroy_workqueue(dws->workqueue); return 0; } @@ -794,7 +661,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; master->setup = dw_spi_setup; - master->transfer = dw_spi_transfer; + master->transfer_one_message = dw_spi_transfer_one_message; master->max_speed_hz = dws->max_freq; /* Basic HW init */ @@ -808,33 +675,21 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) } } - /* Initial and start queue */ - ret = init_queue(dws); - if (ret) { - dev_err(&master->dev, "problem initializing queue\n"); - goto err_diable_hw; - } - ret = start_queue(dws); - if (ret) { - dev_err(&master->dev, "problem starting queue\n"); - goto err_diable_hw; - } + tasklet_init(&dws->pump_transfers, pump_transfers, (unsigned long)dws); spi_master_set_devdata(master, dws); ret = devm_spi_register_master(dev, master); if (ret) { dev_err(&master->dev, "problem registering spi master\n"); - goto err_queue_alloc; + goto err_dma_exit; } mrst_spi_debugfs_init(dws); return 0; -err_queue_alloc: - destroy_queue(dws); +err_dma_exit: if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); -err_diable_hw: spi_enable_chip(dws, 0); err_free_master: spi_master_put(master); @@ -844,18 +699,10 @@ EXPORT_SYMBOL_GPL(dw_spi_add_host); void dw_spi_remove_host(struct dw_spi *dws) { - int status = 0; - if (!dws) return; mrst_spi_debugfs_remove(dws); - /* Remove the queue */ - status = destroy_queue(dws); - if (status != 0) - dev_err(&dws->master->dev, - "dw_spi_remove: workqueue will not complete, message memory not freed\n"); - if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); spi_enable_chip(dws, 0); @@ -868,7 +715,7 @@ int dw_spi_suspend_host(struct dw_spi *dws) { int ret = 0; - ret = stop_queue(dws); + ret = spi_master_suspend(dws->master); if (ret) return ret; spi_enable_chip(dws, 0); @@ -882,7 +729,7 @@ int dw_spi_resume_host(struct dw_spi *dws) int ret; spi_hw_init(dws); - ret = start_queue(dws); + ret = spi_master_resume(dws->master); if (ret) dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); return ret; diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 587643dae11..6d2acad34f6 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -3,6 +3,7 @@ #include <linux/io.h> #include <linux/scatterlist.h> +#include <linux/gpio.h> /* Register offsets */ #define DW_SPI_CTRL0 0x00 @@ -104,14 +105,6 @@ struct dw_spi { u16 bus_num; u16 num_cs; /* supported slave numbers */ - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t lock; - struct list_head queue; - int busy; - int run; - /* Message Transfer pump */ struct tasklet_struct pump_transfers; @@ -186,15 +179,20 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div) dw_writel(dws, DW_SPI_BAUDR, div); } -static inline void spi_chip_sel(struct dw_spi *dws, u16 cs) +static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi, + int active) { - if (cs > dws->num_cs) - return; + u16 cs = spi->chip_select; + int gpio_val = active ? (spi->mode & SPI_CS_HIGH) : + !(spi->mode & SPI_CS_HIGH); if (dws->cs_control) - dws->cs_control(1); + dws->cs_control(active); + if (gpio_is_valid(spi->cs_gpio)) + gpio_set_value(spi->cs_gpio, gpio_val); - dw_writel(dws, DW_SPI_SER, 1 << cs); + if (active) + dw_writel(dws, DW_SPI_SER, 1 << cs); } /* Disable IRQ bits */ diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c index 09965f069a1..ba441ad9a00 100644 --- a/drivers/spi/spi-falcon.c +++ b/drivers/spi/spi-falcon.c @@ -11,7 +11,6 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/delay.h> -#include <linux/workqueue.h> #include <linux/of.h> #include <linux/of_platform.h> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index d565eeee3bd..5021ddf03f6 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -406,7 +406,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static struct of_device_id fsl_dspi_dt_ids[] = { +static const struct of_device_id fsl_dspi_dt_ids[] = { { .compatible = "fsl,vf610-dspi", .data = NULL, }, { /* sentinel */ } }; diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index e767f5831b9..8ebd724e4c5 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -348,7 +348,7 @@ static void fsl_espi_cmd_trans(struct spi_message *m, } espi_trans->tx_buf = local_buf; - espi_trans->rx_buf = local_buf + espi_trans->n_tx; + espi_trans->rx_buf = local_buf; fsl_espi_do_trans(m, espi_trans); espi_trans->actual_length = espi_trans->len; @@ -397,7 +397,7 @@ static void fsl_espi_rw_trans(struct spi_message *m, espi_trans->n_rx = trans_len; espi_trans->len = trans_len + n_tx; espi_trans->tx_buf = local_buf; - espi_trans->rx_buf = local_buf + n_tx; + espi_trans->rx_buf = local_buf; fsl_espi_do_trans(m, espi_trans); memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); @@ -458,7 +458,7 @@ static int fsl_espi_setup(struct spi_device *spi) return -EINVAL; if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; @@ -586,8 +586,10 @@ static struct spi_master * fsl_espi_probe(struct device *dev, struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; struct fsl_espi_reg *reg_base; - u32 regval; - int i, ret = 0; + struct device_node *nc; + const __be32 *prop; + u32 regval, csmode; + int i, len, ret = 0; master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); if (!master) { @@ -634,8 +636,32 @@ static struct spi_master * fsl_espi_probe(struct device *dev, mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); /* Init eSPI CS mode register */ - for (i = 0; i < pdata->max_chipselect; i++) - mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); + for_each_available_child_of_node(master->dev.of_node, nc) { + /* get chip select */ + prop = of_get_property(nc, "reg", &len); + if (!prop || len < sizeof(*prop)) + continue; + i = be32_to_cpup(prop); + if (i < 0 || i >= pdata->max_chipselect) + continue; + + csmode = CSMODE_INIT_VAL; + /* check if CSBEF is set in device tree */ + prop = of_get_property(nc, "fsl,csbef", &len); + if (prop && len >= sizeof(*prop)) { + csmode &= ~(CSMODE_BEF(0xf)); + csmode |= CSMODE_BEF(be32_to_cpup(prop)); + } + /* check if CSAFT is set in device tree */ + prop = of_get_property(nc, "fsl,csaft", &len); + if (prop && len >= sizeof(*prop)) { + csmode &= ~(CSMODE_AFT(0xf)); + csmode |= CSMODE_AFT(be32_to_cpup(prop)); + } + mpc8xxx_spi_write_reg(®_base->csmode[i], csmode); + + dev_info(dev, "cs=%d, init_csmode=0x%x\n", i, csmode); + } /* Enable SPI interface */ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; diff --git a/drivers/spi/spi-fsl-lib.c b/drivers/spi/spi-fsl-lib.c index e5d45fca355..95212ea96c8 100644 --- a/drivers/spi/spi-fsl-lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -99,11 +99,6 @@ int mpc8xxx_spi_transfer(struct spi_device *spi, return 0; } -void mpc8xxx_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - const char *mpc8xxx_spi_strmode(unsigned int flags) { if (flags & SPI_QE_CPU_MODE) { @@ -134,7 +129,6 @@ int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, | SPI_LSB_FIRST | SPI_LOOP; master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; master->dev.of_node = dev->of_node; mpc8xxx_spi = spi_master_get_devdata(master); diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h index 52db6936778..2fcbfd01d10 100644 --- a/drivers/spi/spi-fsl-lib.h +++ b/drivers/spi/spi-fsl-lib.h @@ -124,7 +124,6 @@ extern struct mpc8xxx_spi_probe_info *to_of_pinfo( extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len); extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); -extern void mpc8xxx_spi_cleanup(struct spi_device *spi); extern const char *mpc8xxx_spi_strmode(unsigned int flags); extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index b3e7775034d..98ccd231bf0 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -431,7 +431,7 @@ static int fsl_spi_setup(struct spi_device *spi) return -EINVAL; if (!cs) { - cs = kzalloc(sizeof *cs, GFP_KERNEL); + cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; spi->controller_state = cs; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 09823076df8..9f595535cf2 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -340,7 +340,7 @@ done: } #ifdef CONFIG_OF -static struct of_device_id spi_gpio_dt_ids[] = { +static const struct of_device_id spi_gpio_dt_ids[] = { { .compatible = "spi-gpio" }, {} }; diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 16e30de650b..73e91d5a43d 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -10,7 +10,6 @@ #include <linux/module.h> #include <linux/spinlock.h> -#include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/errno.h> diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index be2a2e108e2..0f5a0aa3b87 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -37,7 +37,6 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/err.h> #include <linux/clk.h> diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 51d99779682..66d2ae21e78 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1111,10 +1111,8 @@ static int pl022_dma_probe(struct pl022 *pl022) } pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!pl022->dummypage) { - dev_dbg(&pl022->adev->dev, "no DMA dummypage!\n"); + if (!pl022->dummypage) goto err_no_dummypage; - } dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", dma_chan_name(pl022->dma_rx_channel), @@ -1809,11 +1807,8 @@ static int pl022_setup(struct spi_device *spi) if (chip == NULL) { chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, - "cannot allocate controller state\n"); + if (!chip) return -ENOMEM; - } dev_dbg(&spi->dev, "allocated memory for controller's runtime state\n"); } @@ -2050,10 +2045,8 @@ pl022_platform_data_dt_get(struct device *dev) } pd = devm_kzalloc(dev, sizeof(struct pl022_ssp_controller), GFP_KERNEL); - if (!pd) { - dev_err(dev, "cannot allocate platform data memory\n"); + if (!pd) return NULL; - } pd->bus_id = -1; pd->enable_dma = 1; diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 3f006d3ed2a..c1865c92ccb 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -8,7 +8,43 @@ #include <linux/module.h> #include <linux/spi/pxa2xx_spi.h> -static int ce4100_spi_probe(struct pci_dev *dev, +enum { + PORT_CE4100, + PORT_BYT, +}; + +struct pxa_spi_info { + enum pxa_ssp_type type; + int port_id; + int num_chipselect; + int tx_slave_id; + int tx_chan_id; + int rx_slave_id; + int rx_chan_id; +}; + +static struct pxa_spi_info spi_info_configs[] = { + [PORT_CE4100] = { + .type = PXA25x_SSP, + .port_id = -1, + .num_chipselect = -1, + .tx_slave_id = -1, + .tx_chan_id = -1, + .rx_slave_id = -1, + .rx_chan_id = -1, + }, + [PORT_BYT] = { + .type = LPSS_SSP, + .port_id = 0, + .num_chipselect = 1, + .tx_slave_id = 0, + .tx_chan_id = 0, + .rx_slave_id = 1, + .rx_chan_id = 1, + }, +}; + +static int pxa2xx_spi_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { struct platform_device_info pi; @@ -16,6 +52,7 @@ static int ce4100_spi_probe(struct pci_dev *dev, struct platform_device *pdev; struct pxa2xx_spi_master spi_pdata; struct ssp_device *ssp; + struct pxa_spi_info *c; ret = pcim_enable_device(dev); if (ret) @@ -25,8 +62,16 @@ static int ce4100_spi_probe(struct pci_dev *dev, if (ret) return ret; + c = &spi_info_configs[ent->driver_data]; + memset(&spi_pdata, 0, sizeof(spi_pdata)); - spi_pdata.num_chipselect = dev->devfn; + spi_pdata.num_chipselect = (c->num_chipselect > 0) ? + c->num_chipselect : dev->devfn; + spi_pdata.tx_slave_id = c->tx_slave_id; + spi_pdata.tx_chan_id = c->tx_chan_id; + spi_pdata.rx_slave_id = c->rx_slave_id; + spi_pdata.rx_chan_id = c->rx_chan_id; + spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0; ssp = &spi_pdata.ssp; ssp->phys_base = pci_resource_start(dev, 0); @@ -36,8 +81,8 @@ static int ce4100_spi_probe(struct pci_dev *dev, return -EIO; } ssp->irq = dev->irq; - ssp->port_id = dev->devfn; - ssp->type = PXA25x_SSP; + ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; + ssp->type = c->type; memset(&pi, 0, sizeof(pi)); pi.parent = &dev->dev; @@ -55,28 +100,29 @@ static int ce4100_spi_probe(struct pci_dev *dev, return 0; } -static void ce4100_spi_remove(struct pci_dev *dev) +static void pxa2xx_spi_pci_remove(struct pci_dev *dev) { struct platform_device *pdev = pci_get_drvdata(dev); platform_device_unregister(pdev); } -static const struct pci_device_id ce4100_spi_devices[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) }, +static const struct pci_device_id pxa2xx_spi_pci_devices[] = { + { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 }, + { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT }, { }, }; -MODULE_DEVICE_TABLE(pci, ce4100_spi_devices); +MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices); -static struct pci_driver ce4100_spi_driver = { - .name = "ce4100_spi", - .id_table = ce4100_spi_devices, - .probe = ce4100_spi_probe, - .remove = ce4100_spi_remove, +static struct pci_driver pxa2xx_spi_pci_driver = { + .name = "pxa2xx_spi_pci", + .id_table = pxa2xx_spi_pci_devices, + .probe = pxa2xx_spi_pci_probe, + .remove = pxa2xx_spi_pci_remove, }; -module_pci_driver(ce4100_spi_driver); +module_pci_driver(pxa2xx_spi_pci_driver); -MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver"); +MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 41185d0557f..a98df7eeb42 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -27,7 +27,6 @@ #include <linux/platform_device.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/spi.h> -#include <linux/workqueue.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -886,11 +885,8 @@ static int setup(struct spi_device *spi) chip = spi_get_ctldata(spi); if (!chip) { chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) { - dev_err(&spi->dev, - "failed setup: can't allocate chip data\n"); + if (!chip) return -ENOMEM; - } if (drv_data->ssp_type == CE4100_SSP) { if (spi->chip_select > 4) { @@ -1037,11 +1033,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev) return NULL; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(&pdev->dev, - "failed to allocate memory for platform data\n"); + if (!pdata) return NULL; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -1202,6 +1195,11 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) tasklet_init(&drv_data->pump_transfers, pump_transfers, (unsigned long)drv_data); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = devm_spi_register_master(&pdev->dev, master); @@ -1210,11 +1208,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) goto out_error_clock_enabled; } - pm_runtime_set_autosuspend_delay(&pdev->dev, 50); - pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - return status; out_error_clock_enabled: diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 78c66e3c53e..fc1de86d3c8 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -287,7 +287,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); if (!xfer) { - dev_err_ratelimited(controller->dev, "unexpected irq %x08 %x08 %x08\n", + dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n", qup_err, spi_err, opflags); return IRQ_HANDLED; } @@ -366,7 +366,7 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) n_words = xfer->len / w_size; controller->w_size = w_size; - if (n_words <= controller->in_fifo_sz) { + if (n_words <= (controller->in_fifo_sz / sizeof(u32))) { mode = QUP_IO_M_MODE_FIFO; writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT); writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT); @@ -749,7 +749,7 @@ static int spi_qup_remove(struct platform_device *pdev) return 0; } -static struct of_device_id spi_qup_dt_match[] = { +static const struct of_device_id spi_qup_dt_match[] = { { .compatible = "qcom,spi-qup-v2.1.1", }, { .compatible = "qcom,spi-qup-v2.2.1", }, { } diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 1fb0ad21332..10112745bb1 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -183,8 +183,6 @@ #define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ #define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ -#define DUMMY_DATA 0x00 - struct rspi_data { void __iomem *addr; u32 max_speed_hz; @@ -197,11 +195,6 @@ struct rspi_data { int rx_irq, tx_irq; const struct spi_ops *ops; - /* for dmaengine */ - struct dma_chan *chan_tx; - struct dma_chan *chan_rx; - - unsigned dma_width_16bit:1; unsigned dma_callbacked:1; unsigned byte_access:1; }; @@ -253,6 +246,8 @@ struct spi_ops { int (*transfer_one)(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer); u16 mode_bits; + u16 flags; + u16 fifo_size; }; /* @@ -266,7 +261,8 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ - spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; + spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), + 2 * rspi->max_speed_hz) - 1; rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); /* Disable dummy transmission, set 16-bit word access, 1 frame */ @@ -302,7 +298,8 @@ static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ - spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; + spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), + 2 * rspi->max_speed_hz) - 1; rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); /* Disable dummy transmission, set byte access */ @@ -335,7 +332,7 @@ static int qspi_set_config_register(struct rspi_data *rspi, int access_size) rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); /* Sets transfer bit rate */ - spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz); + spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz); rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); /* Disable dummy transmission, set byte access */ @@ -403,11 +400,22 @@ static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, return 0; } +static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi) +{ + return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); +} + +static inline int rspi_wait_for_rx_full(struct rspi_data *rspi) +{ + return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE); +} + static int rspi_data_out(struct rspi_data *rspi, u8 data) { - if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { + int error = rspi_wait_for_tx_empty(rspi); + if (error < 0) { dev_err(&rspi->master->dev, "transmit timeout\n"); - return -ETIMEDOUT; + return error; } rspi_write_data(rspi, data); return 0; @@ -415,25 +423,36 @@ static int rspi_data_out(struct rspi_data *rspi, u8 data) static int rspi_data_in(struct rspi_data *rspi) { + int error; u8 data; - if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { + error = rspi_wait_for_rx_full(rspi); + if (error < 0) { dev_err(&rspi->master->dev, "receive timeout\n"); - return -ETIMEDOUT; + return error; } data = rspi_read_data(rspi); return data; } -static int rspi_data_out_in(struct rspi_data *rspi, u8 data) +static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx, + unsigned int n) { - int ret; - - ret = rspi_data_out(rspi, data); - if (ret < 0) - return ret; + while (n-- > 0) { + if (tx) { + int ret = rspi_data_out(rspi, *tx++); + if (ret < 0) + return ret; + } + if (rx) { + int ret = rspi_data_in(rspi); + if (ret < 0) + return ret; + *rx++ = ret; + } + } - return rspi_data_in(rspi); + return 0; } static void rspi_dma_complete(void *arg) @@ -444,97 +463,67 @@ static void rspi_dma_complete(void *arg) wake_up_interruptible(&rspi->wait); } -static int rspi_dma_map_sg(struct scatterlist *sg, const void *buf, - unsigned len, struct dma_chan *chan, - enum dma_transfer_direction dir) -{ - sg_init_table(sg, 1); - sg_set_buf(sg, buf, len); - sg_dma_len(sg) = len; - return dma_map_sg(chan->device->dev, sg, 1, dir); -} - -static void rspi_dma_unmap_sg(struct scatterlist *sg, struct dma_chan *chan, - enum dma_transfer_direction dir) +static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, + struct sg_table *rx) { - dma_unmap_sg(chan->device->dev, sg, 1, dir); -} - -static void rspi_memory_to_8bit(void *buf, const void *data, unsigned len) -{ - u16 *dst = buf; - const u8 *src = data; - - while (len) { - *dst++ = (u16)(*src++); - len--; - } -} - -static void rspi_memory_from_8bit(void *buf, const void *data, unsigned len) -{ - u8 *dst = buf; - const u16 *src = data; - - while (len) { - *dst++ = (u8)*src++; - len--; - } -} + struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL; + u8 irq_mask = 0; + unsigned int other_irq = 0; + dma_cookie_t cookie; + int ret; -static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) -{ - struct scatterlist sg; - const void *buf = NULL; - struct dma_async_tx_descriptor *desc; - unsigned int len; - int ret = 0; - - if (rspi->dma_width_16bit) { - void *tmp; - /* - * If DMAC bus width is 16-bit, the driver allocates a dummy - * buffer. And, the driver converts original data into the - * DMAC data as the following format: - * original data: 1st byte, 2nd byte ... - * DMAC data: 1st byte, dummy, 2nd byte, dummy ... - */ - len = t->len * 2; - tmp = kmalloc(len, GFP_KERNEL); - if (!tmp) - return -ENOMEM; - rspi_memory_to_8bit(tmp, t->tx_buf, t->len); - buf = tmp; - } else { - len = t->len; - buf = t->tx_buf; - } + if (tx) { + desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx, + tx->sgl, tx->nents, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) + return -EIO; - if (!rspi_dma_map_sg(&sg, buf, len, rspi->chan_tx, DMA_TO_DEVICE)) { - ret = -EFAULT; - goto end_nomap; + irq_mask |= SPCR_SPTIE; } - desc = dmaengine_prep_slave_sg(rspi->chan_tx, &sg, 1, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - ret = -EIO; - goto end; + if (rx) { + desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx, + rx->sgl, rx->nents, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_rx) + return -EIO; + + irq_mask |= SPCR_SPRIE; } /* - * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be + * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be * called. So, this driver disables the IRQ while DMA transfer. */ - disable_irq(rspi->tx_irq); + if (tx) + disable_irq(other_irq = rspi->tx_irq); + if (rx && rspi->rx_irq != other_irq) + disable_irq(rspi->rx_irq); - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR); - rspi_enable_irq(rspi, SPCR_SPTIE); + rspi_enable_irq(rspi, irq_mask); rspi->dma_callbacked = 0; - desc->callback = rspi_dma_complete; - desc->callback_param = rspi; - dmaengine_submit(desc); - dma_async_issue_pending(rspi->chan_tx); + if (rx) { + desc_rx->callback = rspi_dma_complete; + desc_rx->callback_param = rspi; + cookie = dmaengine_submit(desc_rx); + if (dma_submit_error(cookie)) + return cookie; + dma_async_issue_pending(rspi->master->dma_rx); + } + if (tx) { + if (rx) { + /* No callback */ + desc_tx->callback = NULL; + } else { + desc_tx->callback = rspi_dma_complete; + desc_tx->callback_param = rspi; + } + cookie = dmaengine_submit(desc_tx); + if (dma_submit_error(cookie)) + return cookie; + dma_async_issue_pending(rspi->master->dma_tx); + } ret = wait_event_interruptible_timeout(rspi->wait, rspi->dma_callbacked, HZ); @@ -542,15 +531,13 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t) ret = 0; else if (!ret) ret = -ETIMEDOUT; - rspi_disable_irq(rspi, SPCR_SPTIE); - enable_irq(rspi->tx_irq); + rspi_disable_irq(rspi, irq_mask); -end: - rspi_dma_unmap_sg(&sg, rspi->chan_tx, DMA_TO_DEVICE); -end_nomap: - if (rspi->dma_width_16bit) - kfree(buf); + if (tx) + enable_irq(rspi->tx_irq); + if (rx && rspi->rx_irq != other_irq) + enable_irq(rspi->rx_irq); return ret; } @@ -585,157 +572,37 @@ static void qspi_receive_init(const struct rspi_data *rspi) rspi_write8(rspi, 0, QSPI_SPBFCR); } -static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t) +static bool __rspi_can_dma(const struct rspi_data *rspi, + const struct spi_transfer *xfer) { - struct scatterlist sg, sg_dummy; - void *dummy = NULL, *rx_buf = NULL; - struct dma_async_tx_descriptor *desc, *desc_dummy; - unsigned int len; - int ret = 0; - - if (rspi->dma_width_16bit) { - /* - * If DMAC bus width is 16-bit, the driver allocates a dummy - * buffer. And, finally the driver converts the DMAC data into - * actual data as the following format: - * DMAC data: 1st byte, dummy, 2nd byte, dummy ... - * actual data: 1st byte, 2nd byte ... - */ - len = t->len * 2; - rx_buf = kmalloc(len, GFP_KERNEL); - if (!rx_buf) - return -ENOMEM; - } else { - len = t->len; - rx_buf = t->rx_buf; - } - - /* prepare dummy transfer to generate SPI clocks */ - dummy = kzalloc(len, GFP_KERNEL); - if (!dummy) { - ret = -ENOMEM; - goto end_nomap; - } - if (!rspi_dma_map_sg(&sg_dummy, dummy, len, rspi->chan_tx, - DMA_TO_DEVICE)) { - ret = -EFAULT; - goto end_nomap; - } - desc_dummy = dmaengine_prep_slave_sg(rspi->chan_tx, &sg_dummy, 1, - DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_dummy) { - ret = -EIO; - goto end_dummy_mapped; - } - - /* prepare receive transfer */ - if (!rspi_dma_map_sg(&sg, rx_buf, len, rspi->chan_rx, - DMA_FROM_DEVICE)) { - ret = -EFAULT; - goto end_dummy_mapped; - - } - desc = dmaengine_prep_slave_sg(rspi->chan_rx, &sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - ret = -EIO; - goto end; - } - - rspi_receive_init(rspi); - - /* - * DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be - * called. So, this driver disables the IRQ while DMA transfer. - */ - disable_irq(rspi->tx_irq); - if (rspi->rx_irq != rspi->tx_irq) - disable_irq(rspi->rx_irq); - - rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR); - rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE); - rspi->dma_callbacked = 0; - - desc->callback = rspi_dma_complete; - desc->callback_param = rspi; - dmaengine_submit(desc); - dma_async_issue_pending(rspi->chan_rx); - - desc_dummy->callback = NULL; /* No callback */ - dmaengine_submit(desc_dummy); - dma_async_issue_pending(rspi->chan_tx); - - ret = wait_event_interruptible_timeout(rspi->wait, - rspi->dma_callbacked, HZ); - if (ret > 0 && rspi->dma_callbacked) - ret = 0; - else if (!ret) - ret = -ETIMEDOUT; - rspi_disable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE); - - enable_irq(rspi->tx_irq); - if (rspi->rx_irq != rspi->tx_irq) - enable_irq(rspi->rx_irq); - -end: - rspi_dma_unmap_sg(&sg, rspi->chan_rx, DMA_FROM_DEVICE); -end_dummy_mapped: - rspi_dma_unmap_sg(&sg_dummy, rspi->chan_tx, DMA_TO_DEVICE); -end_nomap: - if (rspi->dma_width_16bit) { - if (!ret) - rspi_memory_from_8bit(t->rx_buf, rx_buf, t->len); - kfree(rx_buf); - } - kfree(dummy); - - return ret; + return xfer->len > rspi->ops->fifo_size; } -static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t) +static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *xfer) { - if (t->tx_buf && rspi->chan_tx) - return 1; - /* If the module receives data by DMAC, it also needs TX DMAC */ - if (t->rx_buf && rspi->chan_tx && rspi->chan_rx) - return 1; + struct rspi_data *rspi = spi_master_get_devdata(master); - return 0; + return __rspi_can_dma(rspi, xfer); } -static int rspi_transfer_out_in(struct rspi_data *rspi, +static int rspi_common_transfer(struct rspi_data *rspi, struct spi_transfer *xfer) { - int remain = xfer->len, ret; - const u8 *tx_buf = xfer->tx_buf; - u8 *rx_buf = xfer->rx_buf; - u8 spcr, data; - - rspi_receive_init(rspi); - - spcr = rspi_read8(rspi, RSPI_SPCR); - if (rx_buf) - spcr &= ~SPCR_TXMD; - else - spcr |= SPCR_TXMD; - rspi_write8(rspi, spcr, RSPI_SPCR); + int ret; - while (remain > 0) { - data = tx_buf ? *tx_buf++ : DUMMY_DATA; - ret = rspi_data_out(rspi, data); - if (ret < 0) - return ret; - if (rx_buf) { - ret = rspi_data_in(rspi); - if (ret < 0) - return ret; - *rx_buf++ = ret; - } - remain--; + if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) { + /* rx_buf can be NULL on RSPI on SH in TX-only Mode */ + return rspi_dma_transfer(rspi, &xfer->tx_sg, + xfer->rx_buf ? &xfer->rx_sg : NULL); } + ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len); + if (ret < 0) + return ret; + /* Wait for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + rspi_wait_for_tx_empty(rspi); return 0; } @@ -744,46 +611,18 @@ static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { struct rspi_data *rspi = spi_master_get_devdata(master); - int ret; + u8 spcr; - if (!rspi_is_dma(rspi, xfer)) - return rspi_transfer_out_in(rspi, xfer); - - if (xfer->tx_buf) { - ret = rspi_send_dma(rspi, xfer); - if (ret < 0) - return ret; - } - if (xfer->rx_buf) - return rspi_receive_dma(rspi, xfer); - - return 0; -} - -static int rspi_rz_transfer_out_in(struct rspi_data *rspi, - struct spi_transfer *xfer) -{ - int remain = xfer->len, ret; - const u8 *tx_buf = xfer->tx_buf; - u8 *rx_buf = xfer->rx_buf; - u8 data; - - rspi_rz_receive_init(rspi); - - while (remain > 0) { - data = tx_buf ? *tx_buf++ : DUMMY_DATA; - ret = rspi_data_out_in(rspi, data); - if (ret < 0) - return ret; - if (rx_buf) - *rx_buf++ = ret; - remain--; + spcr = rspi_read8(rspi, RSPI_SPCR); + if (xfer->rx_buf) { + rspi_receive_init(rspi); + spcr &= ~SPCR_TXMD; + } else { + spcr |= SPCR_TXMD; } + rspi_write8(rspi, spcr, RSPI_SPCR); - /* Wait for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); - - return 0; + return rspi_common_transfer(rspi, xfer); } static int rspi_rz_transfer_one(struct spi_master *master, @@ -791,68 +630,44 @@ static int rspi_rz_transfer_one(struct spi_master *master, struct spi_transfer *xfer) { struct rspi_data *rspi = spi_master_get_devdata(master); + int ret; - return rspi_rz_transfer_out_in(rspi, xfer); + rspi_rz_receive_init(rspi); + + return rspi_common_transfer(rspi, xfer); } static int qspi_transfer_out_in(struct rspi_data *rspi, struct spi_transfer *xfer) { - int remain = xfer->len, ret; - const u8 *tx_buf = xfer->tx_buf; - u8 *rx_buf = xfer->rx_buf; - u8 data; - qspi_receive_init(rspi); - while (remain > 0) { - data = tx_buf ? *tx_buf++ : DUMMY_DATA; - ret = rspi_data_out_in(rspi, data); - if (ret < 0) - return ret; - if (rx_buf) - *rx_buf++ = ret; - remain--; - } - - /* Wait for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); - - return 0; + return rspi_common_transfer(rspi, xfer); } static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) { - const u8 *buf = xfer->tx_buf; - unsigned int i; int ret; - for (i = 0; i < xfer->len; i++) { - ret = rspi_data_out(rspi, *buf++); - if (ret < 0) - return ret; - } + if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) + return rspi_dma_transfer(rspi, &xfer->tx_sg, NULL); + + ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len); + if (ret < 0) + return ret; /* Wait for the last transmission */ - rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + rspi_wait_for_tx_empty(rspi); return 0; } static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer) { - u8 *buf = xfer->rx_buf; - unsigned int i; - int ret; - - for (i = 0; i < xfer->len; i++) { - ret = rspi_data_in(rspi); - if (ret < 0) - return ret; - *buf++ = ret; - } + if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) + return rspi_dma_transfer(rspi, NULL, &xfer->rx_sg); - return 0; + return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len); } static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi, @@ -862,10 +677,10 @@ static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi, if (spi->mode & SPI_LOOP) { return qspi_transfer_out_in(rspi, xfer); - } else if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) { + } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) { /* Quad or Dual SPI Write */ return qspi_transfer_out(rspi, xfer); - } else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) { + } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) { /* Quad or Dual SPI Read */ return qspi_transfer_in(rspi, xfer); } else { @@ -1046,65 +861,78 @@ static irqreturn_t rspi_irq_tx(int irq, void *_sr) return 0; } -static int rspi_request_dma(struct rspi_data *rspi, - struct platform_device *pdev) +static struct dma_chan *rspi_request_dma_chan(struct device *dev, + enum dma_transfer_direction dir, + unsigned int id, + dma_addr_t port_addr) { - const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev); - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dma_cap_mask_t mask; + struct dma_chan *chan; struct dma_slave_config cfg; int ret; - if (!res || !rspi_pd) - return 0; /* The driver assumes no error. */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - rspi->dma_width_16bit = rspi_pd->dma_width_16bit; - - /* If the module receives data by DMAC, it also needs TX DMAC */ - if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter, - (void *)rspi_pd->dma_rx_id); - if (rspi->chan_rx) { - cfg.slave_id = rspi_pd->dma_rx_id; - cfg.direction = DMA_DEV_TO_MEM; - cfg.dst_addr = 0; - cfg.src_addr = res->start + RSPI_SPDR; - ret = dmaengine_slave_config(rspi->chan_rx, &cfg); - if (!ret) - dev_info(&pdev->dev, "Use DMA when rx.\n"); - else - return ret; - } + chan = dma_request_channel(mask, shdma_chan_filter, + (void *)(unsigned long)id); + if (!chan) { + dev_warn(dev, "dma_request_channel failed\n"); + return NULL; } - if (rspi_pd->dma_tx_id) { - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter, - (void *)rspi_pd->dma_tx_id); - if (rspi->chan_tx) { - cfg.slave_id = rspi_pd->dma_tx_id; - cfg.direction = DMA_MEM_TO_DEV; - cfg.dst_addr = res->start + RSPI_SPDR; - cfg.src_addr = 0; - ret = dmaengine_slave_config(rspi->chan_tx, &cfg); - if (!ret) - dev_info(&pdev->dev, "Use DMA when tx\n"); - else - return ret; - } + + memset(&cfg, 0, sizeof(cfg)); + cfg.slave_id = id; + cfg.direction = dir; + if (dir == DMA_MEM_TO_DEV) + cfg.dst_addr = port_addr; + else + cfg.src_addr = port_addr; + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) { + dev_warn(dev, "dmaengine_slave_config failed %d\n", ret); + dma_release_channel(chan); + return NULL; } + return chan; +} + +static int rspi_request_dma(struct device *dev, struct spi_master *master, + const struct resource *res) +{ + const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev); + + if (!rspi_pd || !rspi_pd->dma_rx_id || !rspi_pd->dma_tx_id) + return 0; /* The driver assumes no error. */ + + master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, + rspi_pd->dma_rx_id, + res->start + RSPI_SPDR); + if (!master->dma_rx) + return -ENODEV; + + master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, + rspi_pd->dma_tx_id, + res->start + RSPI_SPDR); + if (!master->dma_tx) { + dma_release_channel(master->dma_rx); + master->dma_rx = NULL; + return -ENODEV; + } + + master->can_dma = rspi_can_dma; + dev_info(dev, "DMA available"); return 0; } static void rspi_release_dma(struct rspi_data *rspi) { - if (rspi->chan_tx) - dma_release_channel(rspi->chan_tx); - if (rspi->chan_rx) - dma_release_channel(rspi->chan_rx); + if (rspi->master->dma_tx) + dma_release_channel(rspi->master->dma_tx); + if (rspi->master->dma_rx) + dma_release_channel(rspi->master->dma_rx); } static int rspi_remove(struct platform_device *pdev) @@ -1118,23 +946,29 @@ static int rspi_remove(struct platform_device *pdev) } static const struct spi_ops rspi_ops = { - .set_config_register = rspi_set_config_register, - .transfer_one = rspi_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, + .set_config_register = rspi_set_config_register, + .transfer_one = rspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, + .flags = SPI_MASTER_MUST_TX, + .fifo_size = 8, }; static const struct spi_ops rspi_rz_ops = { - .set_config_register = rspi_rz_set_config_register, - .transfer_one = rspi_rz_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, + .set_config_register = rspi_rz_set_config_register, + .transfer_one = rspi_rz_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, + .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX, + .fifo_size = 8, /* 8 for TX, 32 for RX */ }; static const struct spi_ops qspi_ops = { - .set_config_register = qspi_set_config_register, - .transfer_one = qspi_transfer_one, - .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | - SPI_TX_DUAL | SPI_TX_QUAD | - SPI_RX_DUAL | SPI_RX_QUAD, + .set_config_register = qspi_set_config_register, + .transfer_one = qspi_transfer_one, + .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | + SPI_TX_DUAL | SPI_TX_QUAD | + SPI_RX_DUAL | SPI_RX_QUAD, + .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX, + .fifo_size = 32, }; #ifdef CONFIG_OF @@ -1254,6 +1088,7 @@ static int rspi_probe(struct platform_device *pdev) master->prepare_message = rspi_prepare_message; master->unprepare_message = rspi_unprepare_message; master->mode_bits = ops->mode_bits; + master->flags = ops->flags; master->dev.of_node = pdev->dev.of_node; ret = platform_get_irq_byname(pdev, "rx"); @@ -1291,11 +1126,9 @@ static int rspi_probe(struct platform_device *pdev) goto error2; } - ret = rspi_request_dma(rspi, pdev); - if (ret < 0) { - dev_err(&pdev->dev, "rspi_request_dma failed.\n"); - goto error3; - } + ret = rspi_request_dma(&pdev->dev, master, res); + if (ret < 0) + dev_warn(&pdev->dev, "DMA not available, using PIO\n"); ret = devm_spi_register_master(&pdev->dev, master); if (ret < 0) { diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index bed23384dfa..e713737d784 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -10,7 +10,6 @@ */ #include <linux/spinlock.h> -#include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/errno.h> @@ -183,11 +182,11 @@ static int s3c24xx_spi_setup(struct spi_device *spi) /* allocate settings on the first call */ if (!cs) { - cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL); - if (!cs) { - dev_err(&spi->dev, "no memory for controller state\n"); + cs = devm_kzalloc(&spi->dev, + sizeof(struct s3c24xx_spi_devstate), + GFP_KERNEL); + if (!cs) return -ENOMEM; - } cs->spcon = SPCON_DEFAULT; cs->hz = -1; @@ -209,11 +208,6 @@ static int s3c24xx_spi_setup(struct spi_device *spi) return 0; } -static void s3c24xx_spi_cleanup(struct spi_device *spi) -{ - kfree(spi->controller_state); -} - static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) { return hw->tx ? hw->tx[count] : 0; @@ -543,7 +537,6 @@ static int s3c24xx_spi_probe(struct platform_device *pdev) hw->bitbang.txrx_bufs = s3c24xx_spi_txrx; hw->master->setup = s3c24xx_spi_setup; - hw->master->cleanup = s3c24xx_spi_cleanup; dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index f19cd97855e..75a56968b14 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -19,7 +19,6 @@ #include <linux/init.h> #include <linux/module.h> -#include <linux/workqueue.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/clk.h> @@ -773,7 +772,6 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) { - dev_err(&spi->dev, "could not allocate memory for controller data\n"); of_node_put(data_np); return ERR_PTR(-ENOMEM); } @@ -987,10 +985,8 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) u32 temp; sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL); - if (!sci) { - dev_err(dev, "memory allocation for spi_info failed\n"); + if (!sci) return ERR_PTR(-ENOMEM); - } if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) { dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index e850d03e719..45b09142afe 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -642,10 +642,8 @@ static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev) u32 num_cs = 1; info = devm_kzalloc(dev, sizeof(struct sh_msiof_spi_info), GFP_KERNEL); - if (!info) { - dev_err(dev, "failed to allocate setup data\n"); + if (!info) return NULL; - } /* Parse the MSIOF properties */ of_property_read_u32(np, "num-cs", &num_cs); diff --git a/drivers/spi/spi-sh-sci.c b/drivers/spi/spi-sh-sci.c index 8b44b71f502..1f56ef651d1 100644 --- a/drivers/spi/spi-sh-sci.c +++ b/drivers/spi/spi-sh-sci.c @@ -16,7 +16,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/spinlock.h> -#include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 67d8909dcf3..95ac276eaaf 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/completion.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/of.h> @@ -85,6 +86,7 @@ #define SIRFSOC_SPI_TX_DONE BIT(1) #define SIRFSOC_SPI_RX_OFLOW BIT(2) #define SIRFSOC_SPI_TX_UFLOW BIT(3) +#define SIRFSOC_SPI_RX_IO_DMA BIT(4) #define SIRFSOC_SPI_RX_FIFO_FULL BIT(6) #define SIRFSOC_SPI_TXFIFO_EMPTY BIT(7) #define SIRFSOC_SPI_RXFIFO_THD_REACH BIT(8) @@ -264,41 +266,34 @@ static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id) { struct sirfsoc_spi *sspi = dev_id; u32 spi_stat = readl(sspi->base + SIRFSOC_SPI_INT_STATUS); - - writel(spi_stat, sspi->base + SIRFSOC_SPI_INT_STATUS); - if (sspi->tx_by_cmd && (spi_stat & SIRFSOC_SPI_FRM_END)) { complete(&sspi->tx_done); writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_INT_MASK_ALL, + sspi->base + SIRFSOC_SPI_INT_STATUS); return IRQ_HANDLED; } /* Error Conditions */ if (spi_stat & SIRFSOC_SPI_RX_OFLOW || spi_stat & SIRFSOC_SPI_TX_UFLOW) { + complete(&sspi->tx_done); complete(&sspi->rx_done); writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_INT_MASK_ALL, + sspi->base + SIRFSOC_SPI_INT_STATUS); + return IRQ_HANDLED; } + if (spi_stat & SIRFSOC_SPI_TXFIFO_EMPTY) + complete(&sspi->tx_done); + while (!(readl(sspi->base + SIRFSOC_SPI_INT_STATUS) & + SIRFSOC_SPI_RX_IO_DMA)) + cpu_relax(); + complete(&sspi->rx_done); + writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_INT_MASK_ALL, + sspi->base + SIRFSOC_SPI_INT_STATUS); - if (spi_stat & (SIRFSOC_SPI_FRM_END - | SIRFSOC_SPI_RXFIFO_THD_REACH)) - while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS) - & SIRFSOC_SPI_FIFO_EMPTY)) && - sspi->left_rx_word) - sspi->rx_word(sspi); - - if (spi_stat & (SIRFSOC_SPI_TXFIFO_EMPTY | - SIRFSOC_SPI_TXFIFO_THD_REACH)) - while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS) - & SIRFSOC_SPI_FIFO_FULL)) && - sspi->left_tx_word) - sspi->tx_word(sspi); - - /* Received all words */ - if ((sspi->left_rx_word == 0) && (sspi->left_tx_word == 0)) { - complete(&sspi->rx_done); - writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); - } return IRQ_HANDLED; } @@ -309,59 +304,51 @@ static void spi_sirfsoc_dma_fini_callback(void *data) complete(dma_complete); } -static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t) +static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, + struct spi_transfer *t) { struct sirfsoc_spi *sspi; int timeout = t->len * 10; - sspi = spi_master_get_devdata(spi->master); + u32 cmd; - sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage; - sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage; - sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width; - reinit_completion(&sspi->rx_done); - reinit_completion(&sspi->tx_done); - - writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS); - - /* - * fill tx_buf into command register and wait for its completion - */ - if (sspi->tx_by_cmd) { - u32 cmd; - memcpy(&cmd, sspi->tx, t->len); - - if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST)) - cmd = cpu_to_be32(cmd) >> - ((SIRFSOC_MAX_CMD_BYTES - t->len) * 8); - if (sspi->word_width == 2 && t->len == 4 && - (!(spi->mode & SPI_LSB_FIRST))) - cmd = ((cmd & 0xffff) << 16) | (cmd >> 16); - - writel(cmd, sspi->base + SIRFSOC_SPI_CMD); - writel(SIRFSOC_SPI_FRM_END_INT_EN, - sspi->base + SIRFSOC_SPI_INT_EN); - writel(SIRFSOC_SPI_CMD_TX_EN, - sspi->base + SIRFSOC_SPI_TX_RX_EN); + sspi = spi_master_get_devdata(spi->master); + memcpy(&cmd, sspi->tx, t->len); + if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST)) + cmd = cpu_to_be32(cmd) >> + ((SIRFSOC_MAX_CMD_BYTES - t->len) * 8); + if (sspi->word_width == 2 && t->len == 4 && + (!(spi->mode & SPI_LSB_FIRST))) + cmd = ((cmd & 0xffff) << 16) | (cmd >> 16); + writel(cmd, sspi->base + SIRFSOC_SPI_CMD); + writel(SIRFSOC_SPI_FRM_END_INT_EN, + sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_CMD_TX_EN, + sspi->base + SIRFSOC_SPI_TX_RX_EN); + if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { + dev_err(&spi->dev, "cmd transfer timeout\n"); + return 0; + } - if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { - dev_err(&spi->dev, "transfer timeout\n"); - return 0; - } + return t->len; +} - return t->len; - } +static void spi_sirfsoc_dma_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct sirfsoc_spi *sspi; + struct dma_async_tx_descriptor *rx_desc, *tx_desc; + int timeout = t->len * 10; - if (sspi->left_tx_word == 1) { - writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | - SIRFSOC_SPI_ENA_AUTO_CLR, - sspi->base + SIRFSOC_SPI_CTRL); - writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); - writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); - } else if ((sspi->left_tx_word > 1) && (sspi->left_tx_word < - SIRFSOC_SPI_DAT_FRM_LEN_MAX)) { + sspi = spi_master_get_devdata(spi->master); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(0, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS); + if (sspi->left_tx_word < SIRFSOC_SPI_DAT_FRM_LEN_MAX) { writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | - SIRFSOC_SPI_MUL_DAT_MODE | - SIRFSOC_SPI_ENA_AUTO_CLR, + SIRFSOC_SPI_ENA_AUTO_CLR | SIRFSOC_SPI_MUL_DAT_MODE, sspi->base + SIRFSOC_SPI_CTRL); writel(sspi->left_tx_word - 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); @@ -373,76 +360,122 @@ static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t) writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); } - - writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP); - writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); - writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); - writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); - - if (IS_DMA_VALID(t)) { - struct dma_async_tx_descriptor *rx_desc, *tx_desc; - - sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len, DMA_FROM_DEVICE); - rx_desc = dmaengine_prep_slave_single(sspi->rx_chan, - sspi->dst_start, t->len, DMA_DEV_TO_MEM, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - rx_desc->callback = spi_sirfsoc_dma_fini_callback; - rx_desc->callback_param = &sspi->rx_done; - - sspi->src_start = dma_map_single(&spi->dev, (void *)sspi->tx, t->len, DMA_TO_DEVICE); - tx_desc = dmaengine_prep_slave_single(sspi->tx_chan, - sspi->src_start, t->len, DMA_MEM_TO_DEV, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - tx_desc->callback = spi_sirfsoc_dma_fini_callback; - tx_desc->callback_param = &sspi->tx_done; - - dmaengine_submit(tx_desc); - dmaengine_submit(rx_desc); - dma_async_issue_pending(sspi->tx_chan); - dma_async_issue_pending(sspi->rx_chan); - } else { - /* Send the first word to trigger the whole tx/rx process */ - sspi->tx_word(sspi); - - writel(SIRFSOC_SPI_RX_OFLOW_INT_EN | SIRFSOC_SPI_TX_UFLOW_INT_EN | - SIRFSOC_SPI_RXFIFO_THD_INT_EN | SIRFSOC_SPI_TXFIFO_THD_INT_EN | - SIRFSOC_SPI_FRM_END_INT_EN | SIRFSOC_SPI_RXFIFO_FULL_INT_EN | - SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN, sspi->base + SIRFSOC_SPI_INT_EN); - } - - writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, sspi->base + SIRFSOC_SPI_TX_RX_EN); - - if (!IS_DMA_VALID(t)) { /* for PIO */ - if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) - dev_err(&spi->dev, "transfer timeout\n"); - } else if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) { + sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len, + (t->tx_buf != t->rx_buf) ? + DMA_FROM_DEVICE : DMA_BIDIRECTIONAL); + rx_desc = dmaengine_prep_slave_single(sspi->rx_chan, + sspi->dst_start, t->len, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + rx_desc->callback = spi_sirfsoc_dma_fini_callback; + rx_desc->callback_param = &sspi->rx_done; + + sspi->src_start = dma_map_single(&spi->dev, (void *)sspi->tx, t->len, + (t->tx_buf != t->rx_buf) ? + DMA_TO_DEVICE : DMA_BIDIRECTIONAL); + tx_desc = dmaengine_prep_slave_single(sspi->tx_chan, + sspi->src_start, t->len, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + tx_desc->callback = spi_sirfsoc_dma_fini_callback; + tx_desc->callback_param = &sspi->tx_done; + + dmaengine_submit(tx_desc); + dmaengine_submit(rx_desc); + dma_async_issue_pending(sspi->tx_chan); + dma_async_issue_pending(sspi->rx_chan); + writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, + sspi->base + SIRFSOC_SPI_TX_RX_EN); + if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) { dev_err(&spi->dev, "transfer timeout\n"); dmaengine_terminate_all(sspi->rx_chan); } else sspi->left_rx_word = 0; - /* * we only wait tx-done event if transferring by DMA. for PIO, * we get rx data by writing tx data, so if rx is done, tx has * done earlier */ - if (IS_DMA_VALID(t)) { - if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { - dev_err(&spi->dev, "transfer timeout\n"); - dmaengine_terminate_all(sspi->tx_chan); - } - } - - if (IS_DMA_VALID(t)) { - dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE); - dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE); + if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { + dev_err(&spi->dev, "transfer timeout\n"); + dmaengine_terminate_all(sspi->tx_chan); } - + dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE); + dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE); /* TX, RX FIFO stop */ writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP); writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP); - writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN); - writel(0, sspi->base + SIRFSOC_SPI_INT_EN); + if (sspi->left_tx_word >= SIRFSOC_SPI_DAT_FRM_LEN_MAX) + writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN); +} + +static void spi_sirfsoc_pio_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct sirfsoc_spi *sspi; + int timeout = t->len * 10; + + sspi = spi_master_get_devdata(spi->master); + do { + writel(SIRFSOC_SPI_FIFO_RESET, + sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_RESET, + sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, + sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, + sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(0, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_INT_MASK_ALL, + sspi->base + SIRFSOC_SPI_INT_STATUS); + writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | + SIRFSOC_SPI_MUL_DAT_MODE | SIRFSOC_SPI_ENA_AUTO_CLR, + sspi->base + SIRFSOC_SPI_CTRL); + writel(min(sspi->left_tx_word, (u32)(256 / sspi->word_width)) + - 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); + writel(min(sspi->left_rx_word, (u32)(256 / sspi->word_width)) + - 1, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); + while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS) + & SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word) + sspi->tx_word(sspi); + writel(SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN | + SIRFSOC_SPI_TX_UFLOW_INT_EN | + SIRFSOC_SPI_RX_OFLOW_INT_EN, + sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, + sspi->base + SIRFSOC_SPI_TX_RX_EN); + if (!wait_for_completion_timeout(&sspi->tx_done, timeout) || + !wait_for_completion_timeout(&sspi->rx_done, timeout)) { + dev_err(&spi->dev, "transfer timeout\n"); + break; + } + while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS) + & SIRFSOC_SPI_FIFO_EMPTY)) && sspi->left_rx_word) + sspi->rx_word(sspi); + writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + } while (sspi->left_tx_word != 0 || sspi->left_rx_word != 0); +} + +static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct sirfsoc_spi *sspi; + sspi = spi_master_get_devdata(spi->master); + + sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage; + sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage; + sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width; + reinit_completion(&sspi->rx_done); + reinit_completion(&sspi->tx_done); + /* + * in the transfer, if transfer data using command register with rx_buf + * null, just fill command data into command register and wait for its + * completion. + */ + if (sspi->tx_by_cmd) + spi_sirfsoc_cmd_transfer(spi, t); + else if (IS_DMA_VALID(t)) + spi_sirfsoc_dma_transfer(spi, t); + else + spi_sirfsoc_pio_transfer(spi, t); return t->len - sspi->left_rx_word * sspi->word_width; } @@ -512,7 +545,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) break; case 12: case 16: - regval |= (bits_per_word == 12) ? SIRFSOC_SPI_TRAN_DAT_FORMAT_12 : + regval |= (bits_per_word == 12) ? + SIRFSOC_SPI_TRAN_DAT_FORMAT_12 : SIRFSOC_SPI_TRAN_DAT_FORMAT_16; sspi->rx_word = spi_sirfsoc_rx_word_u16; sspi->tx_word = spi_sirfsoc_tx_word_u16; @@ -540,8 +574,8 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) regval |= SIRFSOC_SPI_CLK_IDLE_STAT; /* - * Data should be driven at least 1/2 cycle before the fetch edge to make - * sure that data gets stable at the fetch edge. + * Data should be driven at least 1/2 cycle before the fetch edge + * to make sure that data gets stable at the fetch edge. */ if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) || (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA))) @@ -578,11 +612,14 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (IS_DMA_VALID(t)) { /* Enable DMA mode for RX, TX */ writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL); - writel(SIRFSOC_SPI_RX_DMA_FLUSH, sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL); + writel(SIRFSOC_SPI_RX_DMA_FLUSH, + sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL); } else { /* Enable IO mode for RX, TX */ - writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL); - writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL); + writel(SIRFSOC_SPI_IO_MODE_SEL, + sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL); + writel(SIRFSOC_SPI_IO_MODE_SEL, + sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL); } return 0; @@ -612,7 +649,8 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) goto err_cs; } - master = spi_alloc_master(&pdev->dev, sizeof(*sspi) + sizeof(int) * num_cs); + master = spi_alloc_master(&pdev->dev, + sizeof(*sspi) + sizeof(int) * num_cs); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); return -ENOMEM; @@ -808,8 +846,7 @@ static struct platform_driver spi_sirfsoc_driver = { .remove = spi_sirfsoc_remove, }; module_platform_driver(spi_sirfsoc_driver); - MODULE_DESCRIPTION("SiRF SoC SPI master driver"); -MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, " - "Barry Song <Baohua.Song@csr.com>"); +MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>"); +MODULE_AUTHOR("Barry Song <Baohua.Song@csr.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index d266a870206..85204c93f3d 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/workqueue.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index b3e3498a7e6..bd24093f403 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -20,7 +20,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/reset.h> -#include <linux/workqueue.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 40064959550..e4a85ada861 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -1012,7 +1012,7 @@ static irqreturn_t tegra_spi_isr(int irq, void *context_data) return IRQ_WAKE_THREAD; } -static struct of_device_id tegra_spi_of_match[] = { +static const struct of_device_id tegra_spi_of_match[] = { { .compatible = "nvidia,tegra114-spi", }, {} }; diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 47869ea636e..3548ce25c08 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -419,7 +419,7 @@ static irqreturn_t tegra_sflash_isr(int irq, void *context_data) return handle_cpu_based_xfer(tsd); } -static struct of_device_id tegra_sflash_of_match[] = { +static const struct of_device_id tegra_sflash_of_match[] = { { .compatible = "nvidia,tegra20-sflash", }, {} }; diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index e3c1b93e45d..0b9e32e9f49 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1001,7 +1001,7 @@ static const struct tegra_slink_chip_data tegra20_spi_cdata = { .cs_hold_time = false, }; -static struct of_device_id tegra_slink_of_match[] = { +static const struct of_device_id tegra_slink_of_match[] = { { .compatible = "nvidia,tegra30-slink", .data = &tegra30_spi_cdata, }, { .compatible = "nvidia,tegra20-slink", .data = &tegra20_spi_cdata, }, {} diff --git a/drivers/spi/spi-tle62x0.c b/drivers/spi/spi-tle62x0.c index 2d4010d8082..daf5aa1c24c 100644 --- a/drivers/spi/spi-tle62x0.c +++ b/drivers/spi/spi-tle62x0.c @@ -253,10 +253,8 @@ static int tle62x0_probe(struct spi_device *spi) } st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL); - if (st == NULL) { - dev_err(&spi->dev, "no memory for device state\n"); + if (st == NULL) return -ENOMEM; - } st->us = spi; st->nr_gpio = pdata->gpio_count; diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index f406b30af96..f05abf89c06 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1578,14 +1578,11 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct pch_pd_dev_save *pd_dev_save; pd_dev_save = kzalloc(sizeof(struct pch_pd_dev_save), GFP_KERNEL); - if (!pd_dev_save) { - dev_err(&pdev->dev, "%s Can't allocate pd_dev_sav\n", __func__); + if (!pd_dev_save) return -ENOMEM; - } board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); if (!board_dat) { - dev_err(&pdev->dev, "%s Can't allocate board_dat\n", __func__); retval = -ENOMEM; goto err_no_mem; } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 939edf47323..d4f9670b51b 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -796,7 +796,7 @@ static int spi_transfer_one_message(struct spi_master *master, if (ret > 0) { ret = 0; ms = xfer->len * 8 * 1000 / xfer->speed_hz; - ms += 10; /* some tolerance */ + ms += ms + 100; /* some tolerance */ ms = wait_for_completion_timeout(&master->xfer_completion, msecs_to_jiffies(ms)); @@ -1255,6 +1255,8 @@ static void of_register_spi_devices(struct spi_master *master) spi->mode |= SPI_CS_HIGH; if (of_find_property(nc, "spi-3wire", NULL)) spi->mode |= SPI_3WIRE; + if (of_find_property(nc, "spi-lsb-first", NULL)) + spi->mode |= SPI_LSB_FIRST; /* Device DUAL/QUAD mode */ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { @@ -1268,11 +1270,10 @@ static void of_register_spi_devices(struct spi_master *master) spi->mode |= SPI_TX_QUAD; break; default: - dev_err(&master->dev, - "spi-tx-bus-width %d not supported\n", - value); - spi_dev_put(spi); - continue; + dev_warn(&master->dev, + "spi-tx-bus-width %d not supported\n", + value); + break; } } @@ -1287,11 +1288,10 @@ static void of_register_spi_devices(struct spi_master *master) spi->mode |= SPI_RX_QUAD; break; default: - dev_err(&master->dev, - "spi-rx-bus-width %d not supported\n", - value); - spi_dev_put(spi); - continue; + dev_warn(&master->dev, + "spi-rx-bus-width %d not supported\n", + value); + break; } } diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/include/linux/spi/adi_spi3.h index 0957e65a54b..c84123aa1d0 100644 --- a/arch/blackfin/include/asm/bfin_spi3.h +++ b/include/linux/spi/adi_spi3.h @@ -1,7 +1,7 @@ /* * Analog Devices SPI3 controller driver * - * Copyright (c) 2011 Analog Devices Inc. + * Copyright (c) 2014 Analog Devices Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,14 +11,10 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ +#ifndef _ADI_SPI3_H_ +#define _ADI_SPI3_H_ #include <linux/types.h> @@ -209,9 +205,9 @@ #define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ /* - * bfin spi3 registers layout + * adi spi3 registers layout */ -struct bfin_spi_regs { +struct adi_spi_regs { u32 revid; u32 control; u32 rx_control; @@ -240,7 +236,7 @@ struct bfin_spi_regs { #define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ -struct bfin_spi3_master { +struct adi_spi3_master { u16 num_chipselect; u16 pin_req[7]; }; @@ -248,11 +244,11 @@ struct bfin_spi3_master { /* spi_board_info.controller_data for SPI slave devices, * copied to spi_device.platform_data ... mostly for dma tuning */ -struct bfin_spi3_chip { +struct adi_spi3_chip { u32 control; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ u32 tx_dummy_val; /* tx value for rx only transfer */ bool enable_dma; }; -#endif /* _SPI_CHANNEL_H_ */ +#endif /* _ADI_SPI3_H_ */ diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h index a25bd6f65e7..e546b2ceb62 100644 --- a/include/linux/spi/rspi.h +++ b/include/linux/spi/rspi.h @@ -25,8 +25,6 @@ struct rspi_plat_data { unsigned int dma_tx_id; unsigned int dma_rx_id; - unsigned dma_width_16bit:1; /* DMAC read/write width = 16-bit */ - u16 num_chipselect; }; |