diff options
| -rw-r--r-- | include/net/mac802154.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/include/net/mac802154.h b/include/net/mac802154.h new file mode 100644 index 00000000000..941c4e170b0 --- /dev/null +++ b/include/net/mac802154.h @@ -0,0 +1,126 @@ +/* + * IEEE802.15.4-2003 specification + * + * Copyright (C) 2007-2012 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef NET_MAC802154_H +#define NET_MAC802154_H + +#include <net/af_ieee802154.h> + +/* The following flags are used to indicate changed address settings from + * the stack to the hardware. + */ + +/* indicates that the Short Address changed */ +#define IEEE802515_AFILT_SADDR_CHANGED 0x00000001 +/* indicates that the IEEE Address changed */ +#define IEEE802515_AFILT_IEEEADDR_CHANGED 0x00000002 +/* indicates that the PAN ID changed */ +#define IEEE802515_AFILT_PANID_CHANGED 0x00000004 +/* indicates that PAN Coordinator status changed */ +#define IEEE802515_AFILT_PANC_CHANGED 0x00000008 + +struct ieee802154_hw_addr_filt { + __le16 pan_id; /* Each independent PAN selects a unique + * identifier. This PAN id allows communication + * between devices within a network using short + * addresses and enables transmissions between + * devices across independent networks. + */ + __le16 short_addr; + u8 ieee_addr[IEEE802154_ADDR_LEN]; + u8 pan_coord; +}; + +struct ieee802154_dev { + /* filled by the driver */ + int extra_tx_headroom; + u32 flags; + struct device *parent; + + /* filled by mac802154 core */ + struct ieee802154_hw_addr_filt hw_filt; + void *priv; + struct wpan_phy *phy; +}; + +/* Checksum is in hardware and is omitted from a packet + * + * These following flags are used to indicate hardware capabilities to + * the stack. Generally, flags here should have their meaning + * done in a way that the simplest hardware doesn't need setting + * any particular flags. There are some exceptions to this rule, + * however, so you are advised to review these flags carefully. + */ + +/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */ +#define IEEE802154_HW_OMIT_CKSUM 0x00000001 +/* Indicates that receiver will autorespond with ACK frames. */ +#define IEEE802154_HW_AACK 0x00000002 + +/* struct ieee802154_ops - callbacks from mac802154 to the driver + * + * This structure contains various callbacks that the driver may + * handle or, in some cases, must handle, for example to transmit + * a frame. + * + * start: Handler that 802.15.4 module calls for device initialization. + * This function is called before the first interface is attached. + * + * stop: Handler that 802.15.4 module calls for device cleanup. + * This function is called after the last interface is removed. + * + * xmit: Handler that 802.15.4 module calls for each transmitted frame. + * skb cntains the buffer starting from the IEEE 802.15.4 header. + * The low-level driver should send the frame based on available + * configuration. + * This function should return zero or negative errno. Called with + * pib_lock held. + * + * ed: Handler that 802.15.4 module calls for Energy Detection. + * This function should place the value for detected energy + * (usually device-dependant) in the level pointer and return + * either zero or negative errno. Called with pib_lock held. + * + * set_channel: + * Set radio for listening on specific channel. + * Set the device for listening on specified channel. + * Returns either zero, or negative errno. Called with pib_lock held. + * + * set_hw_addr_filt: + * Set radio for listening on specific address. + * Set the device for listening on specified address. + * Returns either zero, or negative errno. + */ +struct ieee802154_ops { + struct module *owner; + int (*start)(struct ieee802154_dev *dev); + void (*stop)(struct ieee802154_dev *dev); + int (*xmit)(struct ieee802154_dev *dev, + struct sk_buff *skb); + int (*ed)(struct ieee802154_dev *dev, u8 *level); + int (*set_channel)(struct ieee802154_dev *dev, + int page, + int channel); + int (*set_hw_addr_filt)(struct ieee802154_dev *dev, + struct ieee802154_hw_addr_filt *filt, + unsigned long changed); + int (*ieee_addr)(struct ieee802154_dev *dev, + u8 addr[IEEE802154_ADDR_LEN]); +}; + +#endif /* NET_MAC802154_H */ |