diff options
| -rw-r--r-- | drivers/net/ieee802154/at86rf230.c | 47 | ||||
| -rw-r--r-- | include/linux/spi/at86rf230.h | 14 |
2 files changed, 45 insertions, 16 deletions
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index fc315ddea61..cf098889ba6 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -219,6 +219,9 @@ struct at86rf230_local { #define IRQ_PLL_UNL (1 << 1) #define IRQ_PLL_LOCK (1 << 0) +#define IRQ_ACTIVE_HIGH 0 +#define IRQ_ACTIVE_LOW 1 + #define STATE_P_ON 0x00 /* BUSY */ #define STATE_BUSY_RX 0x01 #define STATE_BUSY_TX 0x02 @@ -726,11 +729,16 @@ static irqreturn_t at86rf230_isr(int irq, void *data) return IRQ_HANDLED; } +static int at86rf230_irq_polarity(struct at86rf230_local *lp, int pol) +{ + return at86rf230_write_subreg(lp, SR_IRQ_POLARITY, pol); +} static int at86rf230_hw_init(struct at86rf230_local *lp) { + struct at86rf230_platform_data *pdata = lp->spi->dev.platform_data; + int rc, irq_pol; u8 status; - int rc; rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status); if (rc) @@ -748,6 +756,16 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) dev_info(&lp->spi->dev, "Status: %02x\n", status); } + /* configure irq polarity, defaults to high active */ + if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) + irq_pol = IRQ_ACTIVE_LOW; + else + irq_pol = IRQ_ACTIVE_HIGH; + + rc = at86rf230_irq_polarity(lp, irq_pol); + if (rc) + return rc; + rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, 0xff); /* IRQ_TRX_UR | * IRQ_CCA_ED | * IRQ_TRX_END | @@ -798,37 +816,36 @@ static int at86rf230_hw_init(struct at86rf230_local *lp) return 0; } -static int at86rf230_fill_data(struct spi_device *spi) +static void at86rf230_fill_data(struct spi_device *spi) { struct at86rf230_local *lp = spi_get_drvdata(spi); struct at86rf230_platform_data *pdata = spi->dev.platform_data; - if (!pdata) { - dev_err(&spi->dev, "no platform_data\n"); - return -EINVAL; - } - lp->rstn = pdata->rstn; lp->slp_tr = pdata->slp_tr; lp->dig2 = pdata->dig2; - - return 0; } static int at86rf230_probe(struct spi_device *spi) { + struct at86rf230_platform_data *pdata; struct ieee802154_dev *dev; struct at86rf230_local *lp; u8 man_id_0, man_id_1; - int rc; + int rc, supported = 0; const char *chip; - int supported = 0; if (!spi->irq) { dev_err(&spi->dev, "no IRQ specified\n"); return -EINVAL; } + pdata = spi->dev.platform_data; + if (!pdata) { + dev_err(&spi->dev, "no platform_data\n"); + return -EINVAL; + } + dev = ieee802154_alloc_device(sizeof(*lp), &at86rf230_ops); if (!dev) return -ENOMEM; @@ -851,9 +868,7 @@ static int at86rf230_probe(struct spi_device *spi) spi_set_drvdata(spi, lp); - rc = at86rf230_fill_data(spi); - if (rc) - goto err_fill; + at86rf230_fill_data(spi); rc = gpio_request(lp->rstn, "rstn"); if (rc) @@ -928,7 +943,8 @@ static int at86rf230_probe(struct spi_device *spi) if (rc) goto err_gpio_dir; - rc = request_irq(spi->irq, at86rf230_isr, IRQF_SHARED, + rc = request_irq(spi->irq, at86rf230_isr, + IRQF_SHARED | pdata->irq_type, dev_name(&spi->dev), lp); if (rc) goto err_gpio_dir; @@ -948,7 +964,6 @@ err_gpio_dir: err_slp_tr: gpio_free(lp->rstn); err_rstn: -err_fill: spi_set_drvdata(spi, NULL); mutex_destroy(&lp->bmux); ieee802154_free_device(lp->dev); diff --git a/include/linux/spi/at86rf230.h b/include/linux/spi/at86rf230.h index b2b1afbb320..aa327a8105a 100644 --- a/include/linux/spi/at86rf230.h +++ b/include/linux/spi/at86rf230.h @@ -26,6 +26,20 @@ struct at86rf230_platform_data { int rstn; int slp_tr; int dig2; + + /* Setting the irq_type will configure the driver to request + * the platform irq trigger type according to the given value + * and configure the interrupt polarity of the device to the + * corresponding polarity. + * + * Allowed values are: IRQF_TRIGGER_RISING, IRQF_TRIGGER_FALLING, + * IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW + * + * Setting it to 0, the driver does not touch the trigger type + * configuration of the interrupt and sets the interrupt polarity + * of the device to high active (the default value). + */ + int irq_type; }; #endif |