diff options
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 56 |
1 files changed, 36 insertions, 20 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 04c11655541..f7928054cc9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static struct tfp410_platform_data dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = -1, +static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { + .name = "dvi", + .source = "tfp410.0", + .i2c_bus_num = 3, }; -static struct omap_dss_device beagle_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &dvi_panel, - .phy.dpi.data_lines = 24, +static struct platform_device beagle_dvi_connector_device = { + .name = "connector-dvi", + .id = 0, + .dev.platform_data = &beagle_dvi_connector_pdata, }; -static struct omap_dss_device beagle_tv_device = { +static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { + .name = "tfp410.0", + .source = "dpi.0", + .data_lines = 24, + .power_down_gpio = -1, +}; + +static struct platform_device beagle_tfp410_device = { + .name = "tfp410", + .id = 0, + .dev.platform_data = &beagle_tfp410_pdata, +}; + +static struct connector_atv_platform_data beagle_tv_pdata = { .name = "tv", - .driver_name = "venc", - .type = OMAP_DISPLAY_TYPE_VENC, - .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .source = "venc.0", + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, + .invert_polarity = false, }; -static struct omap_dss_device *beagle_dss_devices[] = { - &beagle_dvi_device, - &beagle_tv_device, +static struct platform_device beagle_tv_connector_device = { + .name = "connector-analog-tv", + .id = 0, + .dev.platform_data = &beagle_tv_pdata, }; static struct omap_dss_board_info beagle_dss_data = { - .num_devices = ARRAY_SIZE(beagle_dss_devices), - .devices = beagle_dss_devices, - .default_device = &beagle_dvi_device, + .default_display_name = "dvi", }; #include "sdram-micron-mt46h32m32lf-6.h" @@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; + beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; + + platform_device_register(&beagle_tfp410_device); + platform_device_register(&beagle_dvi_connector_device); + platform_device_register(&beagle_tv_connector_device); /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; @@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void) if (gpio_is_valid(beagle_config.dvi_pd_gpio)) omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); + omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); |