summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-scsi_host13
-rw-r--r--Documentation/cgroups/memory.txt85
-rw-r--r--Documentation/hwmon/coretemp14
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--Documentation/networking/dmfe.txt3
-rw-r--r--Documentation/networking/ip-sysctl.txt4
-rw-r--r--Documentation/networking/scaling.txt2
-rw-r--r--Documentation/vm/transhuge.txt7
-rw-r--r--MAINTAINERS24
-rw-r--r--Makefile2
-rw-r--r--arch/alpha/Kconfig2
-rw-r--r--arch/arm/Kconfig15
-rw-r--r--arch/arm/boot/dts/tegra-harmony.dts12
-rw-r--r--arch/arm/boot/dts/tegra-seaboard.dts6
-rw-r--r--arch/arm/common/scoop.c2
-rw-r--r--arch/arm/configs/exynos4_defconfig1
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/include/asm/futex.h34
-rw-r--r--arch/arm/include/asm/gpio.h19
-rw-r--r--arch/arm/include/asm/hardware/iop3xx-gpio.h2
-rw-r--r--arch/arm/include/asm/unistd.h4
-rw-r--r--arch/arm/kernel/smp_scu.c10
-rw-r--r--arch/arm/kernel/vmlinux.lds.S15
-rw-r--r--arch/arm/mach-at91/Kconfig13
-rw-r--r--arch/arm/mach-at91/Makefile6
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c2
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c2
-rw-r--r--arch/arm/mach-at91/board-1arm.c2
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c2
-rw-r--r--arch/arm/mach-at91/board-cam60.c2
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c2
-rw-r--r--arch/arm/mach-at91/board-carmeva.c2
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c2
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c2
-rw-r--r--arch/arm/mach-at91/board-csb337.c2
-rw-r--r--arch/arm/mach-at91/board-csb637.c2
-rw-r--r--arch/arm/mach-at91/board-eb9200.c2
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c2
-rw-r--r--arch/arm/mach-at91/board-kafa.c2
-rw-r--r--arch/arm/mach-at91/board-kb9202.c2
-rw-r--r--arch/arm/mach-at91/board-neocore926.c2
-rw-r--r--arch/arm/mach-at91/board-picotux200.c2
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c2
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c2
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c2
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c233
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c2
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c2
-rw-r--r--arch/arm/mach-at91/board-usb-a9260.c230
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c (renamed from arch/arm/mach-at91/board-usb-a9263.c)181
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c2
-rw-r--r--arch/arm/mach-at91/gpio.c4
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-at91/include/mach/timex.h5
-rw-r--r--arch/arm/mach-at91/leds.c2
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-davinci/Makefile3
-rw-r--r--arch/arm/mach-davinci/da830.c3
-rw-r--r--arch/arm/mach-davinci/da850.c3
-rw-r--r--arch/arm/mach-davinci/dm355.c2
-rw-r--r--arch/arm/mach-davinci/dm365.c3
-rw-r--r--arch/arm/mach-davinci/dm644x.c2
-rw-r--r--arch/arm/mach-davinci/dm646x.c2
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio-davinci.h91
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h79
-rw-r--r--arch/arm/mach-davinci/tnetv107x.c3
-rw-r--r--arch/arm/mach-dove/common.c2
-rw-r--r--arch/arm/mach-ep93xx/Kconfig7
-rw-r--r--arch/arm/mach-ep93xx/Makefile1
-rw-r--r--arch/arm/mach-ep93xx/core.c1
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c1
-rw-r--r--arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h (renamed from arch/arm/mach-ep93xx/include/mach/gpio.h)28
-rw-r--r--arch/arm/mach-ep93xx/simone.c2
-rw-r--r--arch/arm/mach-ep93xx/snappercl15.c2
-rw-r--r--arch/arm/mach-ep93xx/vision_ep9307.c364
-rw-r--r--arch/arm/mach-exynos4/Kconfig71
-rw-r--r--arch/arm/mach-exynos4/Makefile12
-rw-r--r--arch/arm/mach-exynos4/clock-exynos4210.c139
-rw-r--r--arch/arm/mach-exynos4/clock-exynos4212.c118
-rw-r--r--arch/arm/mach-exynos4/clock.c224
-rw-r--r--arch/arm/mach-exynos4/cpu.c57
-rw-r--r--arch/arm/mach-exynos4/include/mach/entry-macro.S23
-rw-r--r--arch/arm/mach-exynos4/include/mach/exynos4-clock.h43
-rw-r--r--arch/arm/mach-exynos4/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-exynos4/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-exynos4/include/mach/map.h4
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-clock.h54
-rw-r--r--arch/arm/mach-exynos4/include/mach/regs-mct.h5
-rw-r--r--arch/arm/mach-exynos4/mach-origen.c108
-rw-r--r--arch/arm/mach-exynos4/mach-smdk4x12.c302
-rw-r--r--arch/arm/mach-exynos4/mach-smdkc210.c309
-rw-r--r--arch/arm/mach-exynos4/mach-smdkv310.c78
-rw-r--r--arch/arm/mach-exynos4/mct.c175
-rw-r--r--arch/arm/mach-exynos4/platsmp.c15
-rw-r--r--arch/arm/mach-exynos4/pm.c79
-rw-r--r--arch/arm/mach-exynos4/setup-keypad.c11
-rw-r--r--arch/arm/mach-gemini/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-imx/iomux-imx31.c3
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c3
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-integrator/pci_v3.c2
-rw-r--r--arch/arm/mach-ixp2000/core.c4
-rw-r--r--arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h (renamed from arch/arm/mach-ixp2000/include/mach/gpio.h)4
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x00.c4
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig19
-rw-r--r--arch/arm/mach-ixp4xx/Makefile4
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/gpio.h3
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-ixp4xx/miccpt-pci.c78
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/omixp-setup.c273
-rw-r--r--arch/arm/mach-kirkwood/irq.c3
-rw-r--r--arch/arm/mach-kirkwood/mpp.c3
-rw-r--r--arch/arm/mach-ks8695/Makefile2
-rw-r--r--arch/arm/mach-ks8695/board-acs5k.c4
-rw-r--r--arch/arm/mach-ks8695/board-dsm320.c4
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c4
-rw-r--r--arch/arm/mach-ks8695/devices.c1
-rw-r--r--arch/arm/mach-ks8695/include/mach/gpio-ks8695.h39
-rw-r--r--arch/arm/mach-ks8695/include/mach/gpio.h38
-rw-r--r--arch/arm/mach-ks8695/leds.c4
-rw-r--r--arch/arm/mach-lpc32xx/Makefile2
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h50
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/gpio.h74
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c1
-rw-r--r--arch/arm/mach-mmp/aspenite.c4
-rw-r--r--arch/arm/mach-mmp/brownstone.c1
-rw-r--r--arch/arm/mach-mmp/gplugd.c2
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio-pxa.h30
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio.h23
-rw-r--r--arch/arm/mach-mmp/jasper.c1
-rw-r--r--arch/arm/mach-mmp/mmp2.c3
-rw-r--r--arch/arm/mach-mmp/pxa168.c3
-rw-r--r--arch/arm/mach-mmp/pxa910.c3
-rw-r--r--arch/arm/mach-mmp/tavorevb.c4
-rw-r--r--arch/arm/mach-msm/board-msm7x27.c3
-rw-r--r--arch/arm/mach-msm/board-msm7x30.c3
-rw-r--r--arch/arm/mach-msm/board-qsd8x50.c3
-rw-r--r--arch/arm/mach-msm/board-sapphire.c3
-rw-r--r--arch/arm/mach-msm/board-trout-mmc.c3
-rw-r--r--arch/arm/mach-msm/board-trout-panel.c3
-rw-r--r--arch/arm/mach-msm/include/mach/gpio.h27
-rw-r--r--arch/arm/mach-mv78xx0/irq.c3
-rw-r--r--arch/arm/mach-mv78xx0/mpp.c3
-rw-r--r--arch/arm/mach-mxs/Kconfig17
-rw-r--r--arch/arm/mach-mxs/Makefile1
-rw-r--r--arch/arm/mach-mxs/clock-mx28.c16
-rw-r--r--arch/arm/mach-mxs/include/mach/gpio.h8
-rw-r--r--arch/arm/mach-mxs/include/mach/mxs.h1
-rw-r--r--arch/arm/mach-mxs/include/mach/uncompress.h1
-rw-r--r--arch/arm/mach-mxs/mach-m28evk.c366
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c1
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c2
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c2
-rw-r--r--arch/arm/mach-nomadik/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c3
-rw-r--r--arch/arm/mach-omap1/board-fsample.c3
-rw-r--r--arch/arm/mach-omap1/board-generic.c3
-rw-r--r--arch/arm/mach-omap1/board-h2-mmc.c3
-rw-r--r--arch/arm/mach-omap1/board-h2.c3
-rw-r--r--arch/arm/mach-omap1/board-h3-mmc.c3
-rw-r--r--arch/arm/mach-omap1/board-h3.c3
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c1
-rw-r--r--arch/arm/mach-omap1/board-innovator.c3
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c3
-rw-r--r--arch/arm/mach-omap1/board-osk.c3
-rw-r--r--arch/arm/mach-omap1/board-palmte.c3
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c2
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c2
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c3
-rw-r--r--arch/arm/mach-omap1/board-sx1-mmc.c2
-rw-r--r--arch/arm/mach-omap1/board-sx1.c3
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c2
-rw-r--r--arch/arm/mach-omap1/devices.c2
-rw-r--r--arch/arm/mach-omap1/fpga.c2
-rw-r--r--arch/arm/mach-omap1/irq.c3
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c2
-rw-r--r--arch/arm/mach-omap1/leds-osk.c3
-rw-r--r--arch/arm/mach-omap1/leds.c2
-rw-r--r--arch/arm/mach-omap1/serial.c3
-rw-r--r--arch/arm/mach-omap2/board-generic.c3
-rw-r--r--arch/arm/mach-omap2/board-h4.c3
-rw-r--r--arch/arm/mach-omap2/board-ldp.c3
-rw-r--r--arch/arm/mach-omap2/devices.c3
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c3
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c3
-rw-r--r--arch/arm/mach-orion5x/irq.c3
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c3
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c3
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c3
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c3
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c3
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c3
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c3
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c3
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c3
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c3
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c3
-rw-r--r--arch/arm/mach-pnx4008/gpio.c3
-rw-r--r--arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h (renamed from arch/arm/mach-pnx4008/include/mach/gpio.h)2
-rw-r--r--arch/arm/mach-pnx4008/serial.c3
-rw-r--r--arch/arm/mach-pxa/cm-x255.c1
-rw-r--r--arch/arm/mach-pxa/generic.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/gpio-pxa.h133
-rw-r--r--arch/arm/mach-pxa/include/mach/gpio.h110
-rw-r--r--arch/arm/mach-pxa/include/mach/littleton.h2
-rw-r--r--arch/arm/mach-pxa/irq.c3
-rw-r--r--arch/arm/mach-pxa/lpd270.c3
-rw-r--r--arch/arm/mach-pxa/lubbock.c2
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c4
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c3
-rw-r--r--arch/arm/mach-pxa/pxa25x.c3
-rw-r--r--arch/arm/mach-pxa/pxa27x.c3
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c3
-rw-r--r--arch/arm/mach-pxa/pxa95x.c3
-rw-r--r--arch/arm/mach-pxa/saarb.c4
-rw-r--r--arch/arm/mach-realview/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-s3c2410/include/mach/h1940-latch.h2
-rw-r--r--arch/arm/mach-s3c2443/clock.c2
-rw-r--r--arch/arm/mach-s3c64xx/cpu.c22
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c39
-rw-r--r--arch/arm/mach-s5p64x0/dev-spi.c8
-rw-r--r--arch/arm/mach-s5p64x0/dma.c7
-rw-r--r--arch/arm/mach-s5p64x0/gpiolib.c7
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s5p64x0/irq-eint.c3
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-s5pv210/clock.c6
-rw-r--r--arch/arm/mach-s5pv210/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-sa1100/Makefile2
-rw-r--r--arch/arm/mach-sa1100/generic.c2
-rw-r--r--arch/arm/mach-sa1100/include/mach/gpio.h4
-rw-r--r--arch/arm/mach-shmobile/include/mach/gpio.h24
-rw-r--r--arch/arm/mach-tegra/board-harmony-pcie.c10
-rw-r--r--arch/arm/mach-tegra/board-harmony.c5
-rw-r--r--arch/arm/mach-tegra/board-harmony.h3
-rw-r--r--arch/arm/mach-tegra/board-paz00-pinmux.c3
-rw-r--r--arch/arm/mach-tegra/board-paz00.c64
-rw-r--r--arch/arm/mach-tegra/board-paz00.h10
-rw-r--r--arch/arm/mach-tegra/board-seaboard-pinmux.c6
-rw-r--r--arch/arm/mach-tegra/board-seaboard.c81
-rw-r--r--arch/arm/mach-tegra/board-seaboard.h14
-rw-r--r--arch/arm/mach-tegra/board-trimslice-pinmux.c3
-rw-r--r--arch/arm/mach-tegra/board-trimslice.c4
-rw-r--r--arch/arm/mach-tegra/board-trimslice.h2
-rw-r--r--arch/arm/mach-tegra/include/mach/gpio-tegra.h39
-rw-r--r--arch/arm/mach-tegra/include/mach/gpio.h60
-rw-r--r--arch/arm/mach-tegra/usb_phy.c1
-rw-r--r--arch/arm/mach-u300/Kconfig1
-rw-r--r--arch/arm/mach-u300/core.c31
-rw-r--r--arch/arm/mach-u300/include/mach/gpio-u300.h150
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h294
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h25
-rw-r--r--arch/arm/mach-u300/mmc.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500-u8500uib.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500.c1
-rw-r--r--arch/arm/mach-ux500/board-u5500-sdi.c2
-rw-r--r--arch/arm/mach-ux500/board-u5500.c2
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c2
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c2
-rw-r--r--arch/arm/mach-ux500/devices-common.c2
-rw-r--r--arch/arm/mach-ux500/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-versatile/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-vt8500/include/mach/gpio.h7
-rw-r--r--arch/arm/mach-w90x900/include/mach/gpio.h6
-rw-r--r--arch/arm/mm/cache-v7.S20
-rw-r--r--arch/arm/mm/dma-mapping.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/gpio.h6
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio-nomadik.h (renamed from arch/arm/plat-nomadik/include/plat/gpio.h)17
-rw-r--r--arch/arm/plat-omap/debug-devices.c3
-rw-r--r--arch/arm/plat-omap/debug-leds.c3
-rw-r--r--arch/arm/plat-omap/devices.c3
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h20
-rw-r--r--arch/arm/plat-orion/include/plat/gpio.h10
-rw-r--r--arch/arm/plat-pxa/Makefile1
-rw-r--r--arch/arm/plat-pxa/include/plat/gpio-pxa.h44
-rw-r--r--arch/arm/plat-pxa/include/plat/gpio.h40
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c9
-rw-r--r--arch/arm/plat-s5p/cpu.c46
-rw-r--r--arch/arm/plat-s5p/include/plat/exynos4.h5
-rw-r--r--arch/arm/plat-s5p/include/plat/pll.h55
-rw-r--r--arch/arm/plat-s5p/irq-gpioint.c9
-rw-r--r--arch/arm/plat-samsung/Makefile2
-rw-r--r--arch/arm/plat-samsung/clock.c11
-rw-r--r--arch/arm/plat-samsung/cpu.c58
-rw-r--r--arch/arm/plat-samsung/include/plat/clock.h8
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h113
-rw-r--r--arch/arm/plat-samsung/include/plat/watchdog-reset.h10
-rw-r--r--arch/arm/plat-spear/include/plat/gpio.h25
-rw-r--r--arch/powerpc/platforms/powermac/pci.c14
-rw-r--r--arch/s390/include/asm/elf.h3
-rw-r--r--arch/s390/include/asm/pgtable.h2
-rw-r--r--arch/s390/kernel/asm-offsets.c3
-rw-r--r--arch/s390/kernel/entry64.S6
-rw-r--r--arch/s390/kvm/kvm-s390.c5
-rw-r--r--arch/s390/mm/pgtable.c17
-rw-r--r--arch/sparc/include/asm/spitfire.h2
-rw-r--r--arch/sparc/include/asm/xor_64.h4
-rw-r--r--arch/sparc/kernel/cpu.c12
-rw-r--r--arch/sparc/kernel/cpumap.c2
-rw-r--r--arch/sparc/kernel/head_64.S25
-rw-r--r--arch/sparc/kernel/process_32.c3
-rw-r--r--arch/sparc/kernel/process_64.c3
-rw-r--r--arch/sparc/kernel/setup_32.c2
-rw-r--r--arch/sparc/kernel/setup_64.c18
-rw-r--r--arch/sparc/mm/init_64.c5
-rw-r--r--arch/um/Kconfig.x864
-rw-r--r--arch/um/Makefile2
-rw-r--r--arch/um/drivers/line.c61
-rw-r--r--arch/um/drivers/xterm.c1
-rw-r--r--arch/um/include/asm/ptrace-generic.h4
-rw-r--r--arch/um/include/shared/line.h1
-rw-r--r--arch/um/include/shared/registers.h2
-rw-r--r--arch/um/kernel/process.c2
-rw-r--r--arch/um/kernel/ptrace.c28
-rw-r--r--arch/um/os-Linux/registers.c9
-rw-r--r--arch/um/os-Linux/skas/mem.c2
-rw-r--r--arch/um/os-Linux/skas/process.c19
-rw-r--r--arch/um/sys-i386/asm/ptrace.h5
-rw-r--r--arch/um/sys-i386/ptrace.c28
-rw-r--r--arch/um/sys-i386/shared/sysdep/ptrace.h1
-rw-r--r--arch/um/sys-x86_64/ptrace.c12
-rw-r--r--arch/um/sys-x86_64/shared/sysdep/ptrace.h1
-rw-r--r--arch/x86/include/asm/alternative-asm.h1
-rw-r--r--arch/x86/include/asm/alternative.h4
-rw-r--r--arch/x86/include/asm/cpufeature.h2
-rw-r--r--arch/x86/kernel/rtc.c23
-rw-r--r--arch/x86/kvm/emulate.c2
-rw-r--r--arch/x86/kvm/mmu.c3
-rw-r--r--arch/x86/platform/mrst/vrtc.c9
-rw-r--r--arch/x86/xen/mmu.c6
-rw-r--r--arch/x86/xen/setup.c10
-rw-r--r--arch/x86/xen/smp.c1
-rw-r--r--arch/x86/xen/time.c5
-rw-r--r--block/blk-cgroup.c37
-rw-r--r--block/blk-core.c28
-rw-r--r--block/blk-softirq.c2
-rw-r--r--block/blk-sysfs.c15
-rw-r--r--block/cfq-iosched.c20
-rw-r--r--drivers/acpi/acpica/acconfig.h2
-rw-r--r--drivers/acpi/apei/Kconfig1
-rw-r--r--drivers/acpi/apei/apei-base.c2
-rw-r--r--drivers/ata/pata_at91.c2
-rw-r--r--drivers/base/power/clock_ops.c75
-rw-r--r--drivers/block/floppy.c8
-rw-r--r--drivers/block/xen-blkback/common.h2
-rw-r--r--drivers/block/xen-blkback/xenbus.c6
-rw-r--r--drivers/bluetooth/btusb.c6
-rw-r--r--drivers/bluetooth/btwilink.c16
-rw-r--r--drivers/char/tpm/Kconfig1
-rw-r--r--drivers/char/tpm/tpm.c9
-rw-r--r--drivers/char/tpm/tpm_nsc.c2
-rw-r--r--drivers/cpufreq/pcc-cpufreq.c3
-rw-r--r--drivers/firewire/ohci.c3
-rw-r--r--drivers/gpio/Kconfig9
-rw-r--r--drivers/gpio/Makefile7
-rw-r--r--drivers/gpio/gpio-davinci.c (renamed from arch/arm/mach-davinci/gpio.c)7
-rw-r--r--drivers/gpio/gpio-ep93xx.c22
-rw-r--r--drivers/gpio/gpio-generic.c15
-rw-r--r--drivers/gpio/gpio-ks8695.c (renamed from arch/arm/mach-ks8695/gpio.c)4
-rw-r--r--drivers/gpio/gpio-lpc32xx.c (renamed from arch/arm/mach-lpc32xx/gpiolib.c)2
-rw-r--r--drivers/gpio/gpio-nomadik.c3
-rw-r--r--drivers/gpio/gpio-omap.c2
-rw-r--r--drivers/gpio/gpio-pxa.c (renamed from arch/arm/plat-pxa/gpio.c)4
-rw-r--r--drivers/gpio/gpio-sa1100.c (renamed from arch/arm/mach-sa1100/gpio.c)4
-rw-r--r--drivers/gpio/gpio-tegra.c23
-rw-r--r--drivers/gpio/gpio-tnetv107x.c (renamed from arch/arm/mach-davinci/gpio-tnetv107x.c)0
-rw-r--r--drivers/gpio/gpio-u300.c1190
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c4
-rw-r--r--drivers/gpu/drm/i915/intel_display.c22
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h3
-rw-r--r--drivers/gpu/drm/i915/intel_sdvo.c88
-rw-r--r--drivers/gpu/drm/radeon/atombios_dp.c16
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c58
-rw-r--r--drivers/gpu/drm/radeon/ni.c44
-rw-r--r--drivers/gpu/drm/radeon/r100.c22
-rw-r--r--drivers/gpu/drm/radeon/r200.c4
-rw-r--r--drivers/gpu/drm/radeon/r600.c14
-rw-r--r--drivers/gpu/drm/radeon/radeon.h7
-rw-r--r--drivers/gpu/drm/radeon/radeon_asic.h8
-rw-r--r--drivers/gpu/drm/radeon/radeon_connectors.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon_cursor.c40
-rw-r--r--drivers/gpu/drm/radeon/radeon_display.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_encoders.c9
-rw-r--r--drivers/gpu/drm/radeon/radeon_ttm.c7
-rw-r--r--drivers/gpu/drm/radeon/rv770.c51
-rw-r--r--drivers/gpu/drm/ttm/ttm_bo.c3
-rw-r--r--drivers/hid/hid-wacom.c2
-rw-r--r--drivers/hwmon/coretemp.c216
-rw-r--r--drivers/hwmon/ds620.c2
-rw-r--r--drivers/hwmon/pmbus/pmbus_core.c9
-rw-r--r--drivers/hwmon/w83791d.c4
-rw-r--r--drivers/i2c/busses/i2c-ixp2000.c2
-rw-r--r--drivers/ide/at91_ide.c2
-rw-r--r--drivers/ide/ide-disk.c7
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_cm.c10
-rw-r--r--drivers/input/keyboard/adp5588-keys.c1
-rw-r--r--drivers/input/keyboard/omap-keypad.c2
-rw-r--r--drivers/input/misc/cm109.c2
-rw-r--r--drivers/input/mouse/bcm5974.c20
-rw-r--r--drivers/input/tablet/wacom_sys.c14
-rw-r--r--drivers/input/tablet/wacom_wac.c45
-rw-r--r--drivers/input/touchscreen/wacom_w8001.c2
-rw-r--r--drivers/iommu/dmar.c2
-rw-r--r--drivers/leds/ledtrig-timer.c2
-rw-r--r--drivers/media/video/omap/omap_vout.c13
-rw-r--r--drivers/media/video/omap3isp/ispccdc.c1
-rw-r--r--drivers/media/video/uvc/uvc_driver.c2
-rw-r--r--drivers/media/video/uvc/uvc_entity.c2
-rw-r--r--drivers/media/video/uvc/uvc_video.c10
-rw-r--r--drivers/media/video/uvc/uvcvideo.h2
-rw-r--r--drivers/media/video/v4l2-dev.c11
-rw-r--r--drivers/media/video/v4l2-device.c2
-rw-r--r--drivers/mfd/jz4740-adc.c2
-rw-r--r--drivers/mfd/max8997.c5
-rw-r--r--drivers/mfd/menelaus.c2
-rw-r--r--drivers/mfd/omap-usb-host.c2
-rw-r--r--drivers/mfd/tps65910-irq.c2
-rw-r--r--drivers/mfd/twl4030-madc.c5
-rw-r--r--drivers/mfd/wm8350-gpio.c4
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d.c14
-rw-r--r--drivers/misc/pti.c12
-rw-r--r--drivers/mmc/card/block.c3
-rw-r--r--drivers/mmc/host/omap.c2
-rw-r--r--drivers/mmc/host/sdhci-tegra.c4
-rw-r--r--drivers/mtd/nand/ams-delta.c2
-rw-r--r--drivers/mtd/onenand/omap2.c2
-rw-r--r--drivers/net/Kconfig11
-rw-r--r--drivers/net/arm/at91_ether.c2
-rw-r--r--drivers/net/bnx2x/bnx2x.h124
-rw-r--r--drivers/net/bnx2x/bnx2x_cmn.c27
-rw-r--r--drivers/net/bnx2x/bnx2x_dcb.c1
-rw-r--r--drivers/net/bnx2x/bnx2x_ethtool.c48
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c46
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c178
-rw-r--r--drivers/net/bnx2x/bnx2x_reg.h19
-rw-r--r--drivers/net/bnx2x/bnx2x_stats.c7
-rw-r--r--drivers/net/bonding/bond_3ad.c3
-rw-r--r--drivers/net/bonding/bond_alb.c3
-rw-r--r--drivers/net/bonding/bond_main.c13
-rw-r--r--drivers/net/can/ti_hecc.c1
-rw-r--r--drivers/net/cxgb3/cxgb3_offload.c23
-rw-r--r--drivers/net/cxgb3/l2t.c15
-rw-r--r--drivers/net/cxgb3/l2t.h16
-rw-r--r--drivers/net/cxgb4/cxgb4_main.c3
-rw-r--r--drivers/net/e1000/e1000_hw.c6
-rw-r--r--drivers/net/gianfar_ethtool.c8
-rw-r--r--drivers/net/greth.c12
-rw-r--r--drivers/net/greth.h1
-rw-r--r--drivers/net/ibmveth.c52
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c4
-rw-r--r--drivers/net/netconsole.c8
-rw-r--r--drivers/net/pch_gbe/pch_gbe.h12
-rw-r--r--drivers/net/pch_gbe/pch_gbe_main.c346
-rw-r--r--drivers/net/phy/dp83640.c4
-rw-r--r--drivers/net/ppp_generic.c7
-rw-r--r--drivers/net/pxa168_eth.c1
-rw-r--r--drivers/net/r8169.c32
-rw-r--r--drivers/net/sfc/efx.c18
-rw-r--r--drivers/net/sfc/io.h6
-rw-r--r--drivers/net/sfc/mcdi.c46
-rw-r--r--drivers/net/sfc/nic.c7
-rw-r--r--drivers/net/sfc/nic.h2
-rw-r--r--drivers/net/sfc/siena.c25
-rw-r--r--drivers/net/sfc/workarounds.h2
-rw-r--r--drivers/net/tg3.c2
-rw-r--r--drivers/net/usb/ipheth.c5
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9002_calib.c3
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h2
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_phy.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c10
-rw-r--r--drivers/net/wireless/b43/main.c3
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c21
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c39
-rw-r--r--drivers/net/wireless/iwlegacy/iwl-3945-rs.c13
-rw-r--r--drivers/net/wireless/iwlegacy/iwl-core.c4
-rw-r--r--drivers/net/wireless/iwlegacy/iwl-hcmd.c2
-rw-r--r--drivers/net/wireless/iwlegacy/iwl-tx.c4
-rw-r--r--drivers/net/wireless/iwlegacy/iwl3945-base.c8
-rw-r--r--drivers/net/wireless/iwlegacy/iwl4965-base.c10
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-ucode.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c30
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c47
-rw-r--r--drivers/net/wireless/rtlwifi/core.c8
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/trx.c11
-rw-r--r--drivers/net/wireless/rtlwifi/usb.c1
-rw-r--r--drivers/net/xen-netback/interface.c4
-rw-r--r--drivers/pci/pci.c6
-rw-r--r--drivers/pci/probe.c17
-rw-r--r--drivers/pcmcia/pxa2xx_vpac270.c2
-rw-r--r--drivers/rtc/rtc-imxdi.c1
-rw-r--r--drivers/rtc/rtc-s3c.c26
-rw-r--r--drivers/s390/cio/cio.c8
-rw-r--r--drivers/scsi/3w-9xxx.c2
-rw-r--r--drivers/scsi/Kconfig1
-rw-r--r--drivers/scsi/Makefile2
-rw-r--r--drivers/scsi/aacraid/commsup.c2
-rw-r--r--drivers/scsi/bnx2i/bnx2i_hwi.c2
-rw-r--r--drivers/scsi/cxgbi/cxgb3i/cxgb3i.c2
-rw-r--r--drivers/scsi/fcoe/fcoe.c13
-rw-r--r--drivers/scsi/hpsa.c57
-rw-r--r--drivers/scsi/isci/host.c13
-rw-r--r--drivers/scsi/isci/host.h3
-rw-r--r--drivers/scsi/isci/init.c47
-rw-r--r--drivers/scsi/isci/phy.c13
-rw-r--r--drivers/scsi/isci/registers.h12
-rw-r--r--drivers/scsi/isci/request.c30
-rw-r--r--drivers/scsi/isci/unsolicited_frame_control.c2
-rw-r--r--drivers/scsi/isci/unsolicited_frame_control.h2
-rw-r--r--drivers/scsi/libfc/fc_exch.c59
-rw-r--r--drivers/scsi/libfc/fc_fcp.c11
-rw-r--r--drivers/scsi/libfc/fc_lport.c11
-rw-r--r--drivers/scsi/libsas/sas_expander.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_attr.c7
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c36
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h2
-rw-r--r--drivers/scsi/qla2xxx/qla_fw.h5
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c3
-rw-r--r--drivers/scsi/qla2xxx/qla_inline.h29
-rw-r--r--drivers/scsi/qla2xxx/qla_iocb.c282
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c109
-rw-r--r--drivers/scsi/qla2xxx/qla_mid.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c25
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c30
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/spi/spi-atmel.c2
-rw-r--r--drivers/spi/spi-fsl-spi.c3
-rw-r--r--drivers/spi/spi-imx.c4
-rw-r--r--drivers/spi/spi-topcliff-pch.c93
-rw-r--r--drivers/staging/comedi/drivers/ni_labpc.c4
-rw-r--r--drivers/staging/zcache/zcache-main.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_parameters.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_util.c270
-rw-r--r--drivers/target/target_core_cdb.c35
-rw-r--r--drivers/target/target_core_transport.c9
-rw-r--r--drivers/target/tcm_fc/tcm_fc.h12
-rw-r--r--drivers/target/tcm_fc/tfc_cmd.c90
-rw-r--r--drivers/target/tcm_fc/tfc_conf.c7
-rw-r--r--drivers/target/tcm_fc/tfc_io.c62
-rw-r--r--drivers/tty/serial/atmel_serial.c2
-rw-r--r--drivers/tty/serial/crisv10.c4
-rw-r--r--drivers/usb/host/ohci-pnx4008.c2
-rw-r--r--drivers/usb/host/xhci-hub.c2
-rw-r--r--drivers/usb/host/xhci-ring.c19
-rw-r--r--drivers/usb/musb/davinci.c2
-rw-r--r--drivers/video/atmel_lcdfb.c2
-rw-r--r--drivers/video/omap/lcd_apollon.c2
-rw-r--r--drivers/video/omap/lcd_h3.c2
-rw-r--r--drivers/video/omap/lcd_inn1610.c2
-rw-r--r--drivers/video/omap/lcd_ldp.c2
-rw-r--r--drivers/video/omap/lcd_osk.c2
-rw-r--r--drivers/video/omap/lcd_overo.c2
-rw-r--r--drivers/video/omap/lcd_palmtt.c2
-rw-r--r--drivers/video/pnx4008/sdum.c2
-rw-r--r--drivers/watchdog/hpwdt.c9
-rw-r--r--drivers/watchdog/lantiq_wdt.c8
-rw-r--r--drivers/watchdog/sbc_epx_c3.c2
-rw-r--r--drivers/watchdog/watchdog_dev.c14
-rw-r--r--drivers/xen/events.c40
-rw-r--r--drivers/zorro/zorro.c7
-rw-r--r--fs/btrfs/file.c33
-rw-r--r--fs/btrfs/inode.c18
-rw-r--r--fs/btrfs/ioctl.c21
-rw-r--r--fs/cifs/cifsencrypt.c54
-rw-r--r--fs/cifs/cifsfs.c10
-rw-r--r--fs/cifs/cifssmb.c3
-rw-r--r--fs/cifs/connect.c4
-rw-r--r--fs/ext3/inode.c4
-rw-r--r--fs/ext3/namei.c3
-rw-r--r--fs/ext4/inode.c4
-rw-r--r--fs/ext4/namei.c3
-rw-r--r--fs/gfs2/log.c4
-rw-r--r--fs/gfs2/meta_io.c6
-rw-r--r--fs/gfs2/ops_fstype.c2
-rw-r--r--fs/gfs2/quota.c2
-rw-r--r--fs/hfsplus/super.c15
-rw-r--r--fs/hfsplus/wrapper.c4
-rw-r--r--fs/namei.c12
-rw-r--r--fs/namespace.c2
-rw-r--r--fs/nfs/nfs4_fs.h8
-rw-r--r--fs/nfs/nfs4proc.c20
-rw-r--r--fs/nfs/nfs4renewd.c12
-rw-r--r--fs/nfs/nfs4state.c6
-rw-r--r--fs/nfs/super.c25
-rw-r--r--fs/nfs/write.c2
-rw-r--r--fs/proc/task_mmu.c80
-rw-r--r--fs/quota/quota.c2
-rw-r--r--fs/stat.c2
-rw-r--r--fs/xfs/xfs_aops.c3
-rw-r--r--include/linux/basic_mmio_gpio.h15
-rw-r--r--include/linux/blk_types.h6
-rw-r--r--include/linux/blkdev.h1
-rw-r--r--include/linux/fs.h2
-rw-r--r--include/linux/irqdomain.h1
-rw-r--r--include/linux/kvm.h1
-rw-r--r--include/linux/memcontrol.h19
-rw-r--r--include/linux/mfd/wm8994/pdata.h2
-rw-r--r--include/linux/namei.h3
-rw-r--r--include/linux/pci.h3
-rw-r--r--include/linux/ptp_classify.h13
-rw-r--r--include/linux/sched.h1
-rw-r--r--include/linux/skbuff.h1
-rw-r--r--include/linux/snmp.h2
-rw-r--r--include/linux/swap.h6
-rw-r--r--include/net/flow.h25
-rw-r--r--include/net/request_sock.h3
-rw-r--r--include/net/sctp/command.h1
-rw-r--r--include/net/tcp.h22
-rw-r--r--include/net/transp_v6.h1
-rw-r--r--include/trace/events/writeback.h10
-rw-r--r--init/main.c19
-rw-r--r--kernel/irq/irqdomain.c6
-rw-r--r--kernel/posix-cpu-timers.c5
-rw-r--r--kernel/ptrace.c23
-rw-r--r--kernel/resource.c7
-rw-r--r--kernel/sched.c26
-rw-r--r--kernel/sched_rt.c4
-rw-r--r--kernel/taskstats.c1
-rw-r--r--kernel/tsacct.c15
-rw-r--r--kernel/workqueue.c7
-rw-r--r--lib/sha1.c1
-rw-r--r--lib/xz/xz_dec_bcj.c27
-rw-r--r--mm/backing-dev.c30
-rw-r--r--mm/filemap.c6
-rw-r--r--mm/memcontrol.c172
-rw-r--r--mm/mempolicy.c9
-rw-r--r--mm/slub.c2
-rw-r--r--mm/vmalloc.c8
-rw-r--r--mm/vmscan.c66
-rw-r--r--mm/vmstat.c4
-rw-r--r--net/batman-adv/soft-interface.c10
-rw-r--r--net/bluetooth/hci_event.c17
-rw-r--r--net/bridge/netfilter/Kconfig2
-rw-r--r--net/caif/caif_dev.c6
-rw-r--r--net/can/af_can.c2
-rw-r--r--net/can/bcm.c53
-rw-r--r--net/ceph/ceph_common.c1
-rw-r--r--net/ceph/messenger.c1
-rw-r--r--net/ceph/osd_client.c4
-rw-r--r--net/ceph/osdmap.c84
-rw-r--r--net/core/dev.c8
-rw-r--r--net/core/fib_rules.c4
-rw-r--r--net/core/flow.c36
-rw-r--r--net/core/skbuff.c22
-rw-r--r--net/ethernet/eth.c2
-rw-r--r--net/ipv4/af_inet.c7
-rw-r--r--net/ipv4/fib_semantics.c10
-rw-r--r--net/ipv4/netfilter/ip_queue.c12
-rw-r--r--net/ipv4/proc.c2
-rw-r--r--net/ipv4/tcp_input.c2
-rw-r--r--net/ipv4/tcp_ipv4.c49
-rw-r--r--net/ipv6/addrconf.c4
-rw-r--r--net/ipv6/datagram.c5
-rw-r--r--net/ipv6/ip6_flowlabel.c8
-rw-r--r--net/ipv6/ip6mr.c8
-rw-r--r--net/ipv6/ipv6_sockglue.c2
-rw-r--r--net/ipv6/netfilter/ip6_queue.c12
-rw-r--r--net/ipv6/raw.c4
-rw-r--r--net/ipv6/route.c37
-rw-r--r--net/ipv6/tcp_ipv6.c34
-rw-r--r--net/ipv6/udp.c4
-rw-r--r--net/irda/irsysctl.c6
-rw-r--r--net/irda/qos.c6
-rw-r--r--net/mac80211/sta_info.c2
-rw-r--r--net/netfilter/nf_conntrack_pptp.c1
-rw-r--r--net/netfilter/nf_conntrack_proto_tcp.c6
-rw-r--r--net/netfilter/nfnetlink_queue.c4
-rw-r--r--net/netfilter/xt_rateest.c9
-rw-r--r--net/packet/af_packet.c5
-rw-r--r--net/rds/iw_rdma.c13
-rw-r--r--net/sched/cls_rsvp.h27
-rw-r--r--net/sctp/sm_sideeffect.c5
-rw-r--r--net/sctp/sm_statefuns.c6
-rw-r--r--net/wireless/nl80211.c5
-rw-r--r--net/wireless/reg.c1
-rw-r--r--net/wireless/sme.c2
-rw-r--r--net/xfrm/xfrm_input.c5
-rw-r--r--net/xfrm/xfrm_policy.c10
-rw-r--r--sound/core/pcm_lib.c33
-rw-r--r--sound/pci/fm801.c15
-rw-r--r--sound/pci/hda/hda_codec.c6
-rw-r--r--sound/pci/hda/hda_intel.c9
-rw-r--r--sound/pci/hda/patch_cirrus.c2
-rw-r--r--sound/pci/hda/patch_realtek.c17
-rw-r--r--sound/pci/hda/patch_sigmatel.c2
-rw-r--r--sound/soc/blackfin/bf5xx-ad193x.c4
-rw-r--r--sound/soc/blackfin/bf5xx-ad73311.c2
-rw-r--r--sound/soc/codecs/ssm2602.c3
-rw-r--r--sound/soc/codecs/wm8753.c4
-rw-r--r--sound/soc/codecs/wm8962.c26
-rw-r--r--sound/soc/fsl/mpc5200_dma.c6
-rw-r--r--sound/soc/imx/imx-pcm-fiq.c1
-rw-r--r--sound/soc/kirkwood/kirkwood-i2s.c2
-rw-r--r--sound/soc/omap/mcpdm.c2
-rw-r--r--sound/soc/omap/mcpdm.h2
-rw-r--r--sound/soc/omap/omap-mcbsp.c6
-rw-r--r--sound/soc/pxa/zylonite.c8
-rw-r--r--sound/soc/soc-cache.c12
-rw-r--r--sound/soc/soc-core.c22
-rw-r--r--sound/soc/soc-dapm.c2
-rw-r--r--sound/soc/soc-jack.c2
-rw-r--r--sound/usb/card.c7
-rw-r--r--tools/perf/Makefile9
-rw-r--r--tools/perf/builtin-record.c3
-rw-r--r--tools/perf/builtin-test.c2
-rw-r--r--tools/perf/builtin-top.c9
-rw-r--r--tools/perf/util/event.c5
-rw-r--r--tools/perf/util/event.h2
-rw-r--r--tools/perf/util/evlist.c13
-rw-r--r--tools/perf/util/evlist.h1
-rw-r--r--tools/perf/util/evsel.c57
-rw-r--r--tools/perf/util/probe-finder.c2
-rw-r--r--tools/perf/util/python.c2
-rw-r--r--tools/perf/util/session.h3
-rw-r--r--tools/perf/util/sort.c10
-rw-r--r--tools/perf/util/symbol.c153
736 files changed, 8673 insertions, 5649 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host
new file mode 100644
index 00000000000..29a4f892e43
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -0,0 +1,13 @@
+What: /sys/class/scsi_host/hostX/isci_id
+Date: June 2011
+Contact: Dave Jiang <dave.jiang@intel.com>
+Description:
+ This file contains the enumerated host ID for the Intel
+ SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+ Storage Control Unit embeds up to two 4-port controllers in
+ a single PCI device. The controllers are enumerated in order
+ which usually means the lowest number scsi_host corresponds
+ with the first controller, but this association is not
+ guaranteed. The 'isci_id' attribute unambiguously identifies
+ the controller index: '0' for the first controller,
+ '1' for the second.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 6f3c598971f..06eb6d957c8 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -380,7 +380,7 @@ will be charged as a new owner of it.
5.2 stat file
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
# per-memory cgroup local status
cache - # of bytes of page cache memory.
@@ -438,89 +438,6 @@ Note:
file_mapped is accounted only when the memory cgroup is owner of page
cache.)
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
- scanned_file_pages_by_limit indicates the number of scanned
- file pages at vmscan.
-
-Now, 3 parameters are supported
-
- scanned - the number of pages scanned by vmscan
- rotated - the number of pages activated at vmscan
- freed - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
- limit - the memory cgroup's limit
- system - global memory pressure + softlimit
- (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index fa8776ab9b1..84d46c0c71a 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
All Sysfs entries are named with their core_id (represented here by 'X').
tempX_input - Core temperature (in millidegrees Celsius).
tempX_max - All cooling devices should be turned on (on Core2).
- Initialized with IA32_THERM_INTERRUPT. When the CPU
- temperature reaches this temperature, an interrupt is
- generated and tempX_max_alarm is set.
-tempX_max_hyst - If the CPU temperature falls below than temperature,
- an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max.
- Reset if the temperature drops to or below tempX_max_hyst.
tempX_crit - Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
@@ -49,9 +42,10 @@ tempX_label - Contains string "Core X", where X is processor
number. For Package temp, this will be "Physical id Y",
where Y is the package number.
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
Appendix A. Known TjMax lists (TBD):
Some information comes from ark.intel.com
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 614d0382e2c..854ed5ca7e3 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Override pmtimer IOPort with a hex value.
e.g. pmtmr=0x508
- pnp.debug [PNP]
- Enable PNP debug messages. This depends on the
- CONFIG_PNP_DEBUG_MESSAGES option.
+ pnp.debug=1 [PNP]
+ Enable PNP debug messages (depends on the
+ CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
+ via /sys/module/pnp/parameters/debug. We always show
+ current resource usage; turning this on also shows
+ possible settings and some assignment information.
pnpacpi= [ACPI]
{ off }
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
index 8006c227fda..25320bf19c8 100644
--- a/Documentation/networking/dmfe.txt
+++ b/Documentation/networking/dmfe.txt
@@ -1,3 +1,5 @@
+Note: This driver doesn't have a maintainer.
+
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
This program is free software; you can redistribute it and/or
@@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases.
Authors:
Sten Wang <sten_wang@davicom.com.tw > : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
Contributors:
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 81546990f41..ca5cdcd0f0e 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1042,7 +1042,7 @@ conf/interface/*:
The functional behaviour for certain settings is different
depending on whether local forwarding is enabled or not.
-accept_ra - BOOLEAN
+accept_ra - INTEGER
Accept Router Advertisements; autoconfigure using them.
Possible values are:
@@ -1106,7 +1106,7 @@ dad_transmits - INTEGER
The amount of Duplicate Address Detection probes to send.
Default: 1
-forwarding - BOOLEAN
+forwarding - INTEGER
Configure interface-specific Host/Router behaviour.
Note: It is recommended to have the same setting on all
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 58fd7414e6c..8ce7c30e723 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -243,7 +243,7 @@ configured. The number of entries in the global flow table is set through:
The number of entries in the per-queue flow table are set through:
- /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
+ /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt
== Suggested Configuration
diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt
index 0924aaca330..29bdf62aac0 100644
--- a/Documentation/vm/transhuge.txt
+++ b/Documentation/vm/transhuge.txt
@@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never".
khugepaged runs usually at low frequency so while one may not want to
invoke defrag algorithms synchronously during the page faults, it
should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
You can also control how many pages khugepaged should scan at each
pass:
diff --git a/MAINTAINERS b/MAINTAINERS
index 28f65c249b9..ace8f9c81b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c
ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
-M: Jie Yang <jie.yang@atheros.com>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
@@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/
BROCADE BNA 10 GIGABIT ETHERNET DRIVER
M: Rasesh Mody <rmody@brocade.com>
-M: Debashis Dutt <ddutt@brocade.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bna/
@@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
-M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
M: David Wang <dwang2@cisco.com>
S: Supported
@@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M: Intel SCU Linux support <intel-linux-scu@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
+M: Dave Jiang <dave.jiang@intel.com>
+M: Ed Nadolski <edmund.nadolski@intel.com>
+L: linux-scsi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S: Maintained
+F: drivers/scsi/isci/
+F: firmware/isci/
+
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
@@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
@@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <bharrosh@panasas.com>
-M: Benny Halevy <bhalevy@panasas.com>
+M: Benny Halevy <bhalevy@tonian.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
@@ -6365,7 +6374,6 @@ S: Supported
F: arch/arm/mach-tegra
TEHUTI ETHERNET DRIVER
-M: Alexander Indenbaum <baum@tehutinetworks.net>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
S: Supported
@@ -7200,6 +7208,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
+F: drivers/input/misc/wm831x-on.c
+F: drivers/input/touchscreen/wm831x-ts.c
+F: drivers/input/touchscreen/wm97*.c
F: drivers/mfd/wm8*.c
F: drivers/power/wm83*.c
F: drivers/rtc/rtc-wm83*.c
@@ -7209,6 +7220,7 @@ F: drivers/watchdog/wm83*_wdt.c
F: include/linux/mfd/wm831x/
F: include/linux/mfd/wm8350/
F: include/linux/mfd/wm8400*
+F: include/linux/wm97xx.h
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
diff --git a/Makefile b/Makefile
index 522fa4784e6..31f967c31e7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc9
NAME = "Divemaster Edition"
# *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 60cde53d266..8bb936226de 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config ZONE_DMA
bool
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2686959319a..7bbb03558d2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -861,6 +861,7 @@ config ARCH_U300
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -1310,6 +1311,20 @@ config ARM_ERRATA_364296
processor into full low interrupt latency mode. ARM11MPCore
is not affected.
+config ARM_ERRATA_764369
+ bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for erratum 764369
+ affecting Cortex-A9 MPCore with two or more processors (all
+ current revisions). Under certain timing circumstances, a data
+ cache line maintenance operation by MVA targeting an Inner
+ Shareable memory region may fail to proceed up to either the
+ Point of Coherency or to the Point of Unification of the
+ system. This workaround adds a DSB instruction before the
+ relevant cache maintenance functions and sets a specific bit
+ in the diagnostic control register of the SCU.
+
endmenu
source "arch/arm/common/Kconfig"
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 4c053340ce3..e5818668d09 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -57,14 +57,14 @@
};
sdhci@c8000200 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 155 0>; /* power, gpio PT3 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000600 {
- gpios = <&gpio 58 0>, /* cd, gpio PH2 */
- <&gpio 59 0>, /* wp, gpio PH3 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 1940cae0074..64cedca6fc7 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -21,8 +21,8 @@
};
sdhci@c8000400 {
- gpios = <&gpio 69 0>, /* cd, gpio PI5 */
- <&gpio 57 0>, /* wp, gpio PH1 */
- <&gpio 70 0>; /* power, gpio PI6 */
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
};
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a07b0e763a8..1cde34a080d 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,11 +12,11 @@
*/
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <asm/hardware/scoop.h>
/* PCMCIA to Scoop linkage
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3b4d7..cd40bb56e56 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d180d..6ee781bf6bf 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@ CONFIG_MACH_MX23EVK=y
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 8c73900da9e..253cc86318b 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -25,17 +25,17 @@
#ifdef CONFIG_SMP
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
smp_mb(); \
__asm__ __volatile__( \
- "1: ldrex %1, [%2]\n" \
+ "1: ldrex %1, [%3]\n" \
" " insn "\n" \
- "2: strex %1, %0, [%2]\n" \
- " teq %1, #0\n" \
+ "2: strex %2, %0, [%3]\n" \
+ " teq %2, #0\n" \
" bne 1b\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
#include <linux/preempt.h>
#include <asm/domain.h>
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
__asm__ __volatile__( \
- "1: " T(ldr) " %1, [%2]\n" \
+ "1: " T(ldr) " %1, [%3]\n" \
" " insn "\n" \
- "2: " T(str) " %0, [%2]\n" \
+ "2: " T(str) " %0, [%3]\n" \
" mov %0, #0\n" \
- __futex_atomic_ex_table("%4") \
- : "=&r" (ret), "=&r" (oldval) \
+ __futex_atomic_ex_table("%5") \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
- int oldval = 0, ret;
+ int oldval = 0, ret, tmp;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
+ __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg);
break;
default:
ret = -ENOSYS;
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 166a7a3e284..11ad0bfbb0a 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,4 +4,23 @@
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
+#ifndef __ARM_GPIOLIB_COMPLEX
+/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
+#include <asm-generic/gpio.h>
+
+/* The trivial gpiolib dispatchers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#endif
+
+/*
+ * Provide a default gpio_to_irq() which should satisfy every case.
+ * However, some platforms want to do this differently, so allow them
+ * to override it.
+ */
+#ifndef gpio_to_irq
+#define gpio_to_irq __gpio_to_irq
+#endif
+
#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index b69d972b1f7..9eda7dc92ad 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
#define IOP3XX_N_GPIOS 8
static inline int gpio_get_value(unsigned gpio)
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 2c04ed5efeb..c60a2944f95 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -478,8 +478,8 @@
/*
* Unimplemented (or alternatively implemented) syscalls
*/
-#define __IGNORE_fadvise64_64 1
-#define __IGNORE_migrate_pages 1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 5b6d536cbfe..8f5dd796335 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -13,6 +13,7 @@
#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#define SCU_CTRL 0x00
#define SCU_CONFIG 0x04
@@ -37,6 +38,15 @@ void scu_enable(void __iomem *scu_base)
{
u32 scu_ctrl;
+#ifdef CONFIG_ARM_ERRATA_764369
+ /* Cortex-A9 only */
+ if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+ scu_ctrl = __raw_readl(scu_base + 0x30);
+ if (!(scu_ctrl & 1))
+ __raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+ }
+#endif
+
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
/* already enabled? */
if (scu_ctrl & 1)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index bf977f8514f..4e66f62b8d4 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,8 +23,10 @@
#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
#define ARM_EXIT_KEEP(x) x
+#define ARM_EXIT_DISCARD(x)
#else
#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x) x
#endif
OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
SECTIONS
{
/*
+ * XXX: The linker does not define how output sections are
+ * assigned to input sections when there are multiple statements
+ * matching the same input section name. There is no documented
+ * order of matching.
+ *
* unwind exit sections must be discarded before the rest of the
* unwind sections get included.
*/
@@ -47,6 +54,9 @@ SECTIONS
*(.ARM.extab.exit.text)
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+ ARM_EXIT_DISCARD(EXIT_TEXT)
+ ARM_EXIT_DISCARD(EXIT_DATA)
+ EXIT_CALL
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
#ifndef CONFIG_SMP_ON_UP
*(.alt.smp.init)
#endif
+ *(.discard)
+ *(.discard.*)
}
#ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
STABS_DEBUG
.comment 0 : { *(.comment) }
-
- /* Default discards */
- DISCARDS
}
/*
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22484670e7b..04a85c546ab 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@ config MACH_ECO920
help
Select this if you are using the eco920 board
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
@@ -381,6 +386,14 @@ config MACH_GSIA18S
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b1c9d..d992dd5d932 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@ obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
@@ -53,7 +54,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@ obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dba0d8d8a4b..f87f5040e78 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -16,6 +16,7 @@
#include <asm/mach/irq.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -23,7 +24,6 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
#include <mach/at91cap9.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7227755ffec..978be950035 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -14,11 +14,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f47b4b..a53b3de9daa 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -13,11 +13,11 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0f917928eeb..4e647b65333 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a050f41fc86..dd7662bc395 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -20,7 +21,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 600bffb01ed..c3dfb1b3b1e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -21,7 +22,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index aacb19dc922..305a851b5bf 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -10,6 +10,7 @@
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -17,7 +18,6 @@
#include <video/atmel_lcdc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 5aa58851eb3..367d5cd5e36 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index b0c796d42e4..0487ea10c2d 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -25,6 +25,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d1abd5898e8..747b2eaa973 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b743e9..062670351a6 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/map.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c578c5d9072..774c87fcbd5 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index f4da8a16d5d..fc885a4ce24 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2d919f5a4f5..d35e65b08cc 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +37,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5e94e..c3936665e64 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 72b55674616..586100e2acb 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -35,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 01170a2766a..45db7a3dbef 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c51f2..2f9c16d2921 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a170890b3b..3bae73e6363 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -19,6 +19,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -34,7 +35,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d496ead..15a3f1a87ab 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -35,7 +36,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9bc6ab32e0a..6094496f7ed 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index b7b8390e8a0..0a8fe6a1b7c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 81f91103368..938cc390bea 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -40,7 +41,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faadb47..b4ac30e38a9 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd7b9e..99fd7f8aee0 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 00000000000..e927df0175d
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ * Copyright (C)
+ * 2005 SAN People,
+ * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+ .ports = 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("24c01", 0x50),
+ }
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB6,
+ .active_low = 0,
+ },
+ {
+ .name = "led1",
+ .gpio = AT91_PIN_PB7,
+ .active_low = 0,
+ },
+ {
+ .name = "led2",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 0,
+ },
+ {
+ .name = "led3",
+ .gpio = AT91_PIN_PB9,
+ .active_low = 0,
+ },
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+ { /* DataFlash chip 1*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+ { /* DataFlash chip 2*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M - (3 * SZ_128K)
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_8M
+ },
+ {
+ .name = "kernelupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "rootupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 9 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+ .width = 2,
+ .parts = rsiews_nor_partitions,
+ .nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_16M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rsiews_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rsiews_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ /* Ethernet */
+ at91_add_device_eth(&rsi_ews_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&rsi_ews_usbh_data);
+ /* I2C */
+ at91_add_device_i2c(rsi_ews_i2c_devices,
+ ARRAY_SIZE(rsi_ews_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(rsi_ews_spi_devices,
+ ARRAY_SIZE(rsi_ews_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ /* NOR Flash */
+ platform_device_register(&rsiews_nor_flash);
+ /* LEDs */
+ at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+ /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = rsi_ews_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f1289..2a21e790250 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -21,6 +21,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -37,7 +38,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 8a50c3e6718..89c8b579bfd 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0ec50c..3741f43cdae 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -45,7 +46,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ea8f185d3b9..a580dd451a4 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -20,6 +20,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -44,7 +45,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 817f59d7251..8d77c2ff96b 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -18,6 +18,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -41,7 +42,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ad234ccbf57..2d6203ac1a4 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -14,6 +14,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -38,7 +39,6 @@
#include <asm/mach/irq.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 4f14b54b93a..39a28effc3d 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -8,6 +8,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -30,7 +31,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index 8c4c1a02c4b..00000000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Uboot & Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 0,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a926x.c
index 25e793782a4..5852d3d9890 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -1,9 +1,10 @@
/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2007 Calao-systems
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,7 +28,9 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -39,7 +42,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
@@ -74,10 +76,42 @@ static struct at91_udc_data __initdata ek_udc_data = {
.pullup_pin = 0, /* pull-up driven by UDC */
};
+static void __init ek_add_device_udc(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+ at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+ irqreturn_t (*detect_int)(int, void *), void *data)
+{
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+ return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+ .init = at91_mmc_spi_init,
+ .exit = at91_mmc_spi_exit,
+ .detect_delay = 100, /* msecs */
+};
+#endif
+
/*
* SPI devices.
*/
-static struct spi_board_info ek_spi_devices[] = {
+static struct spi_board_info usb_a9263_spi_devices[] = {
#if !defined(CONFIG_MMC_AT91)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
@@ -88,6 +122,27 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &at91_mmc_spi_pdata,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+ if (machine_is_usb_a9263())
+ at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+ else if (machine_is_usb_a9g20())
+ at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
/*
* MACB Ethernet device
*/
@@ -96,24 +151,42 @@ static struct at91_eth_data __initdata ek_macb_data = {
.is_rmii = 1,
};
+static void __init ek_add_device_eth(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+ at91_add_device_eth(&ek_macb_data);
+}
+
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
- .name = "Linux Kernel",
+ .name = "barebox",
.offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
+ .size = 3 * SZ_128K,
+ }, {
+ .name = "bareboxenv",
.offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
+ .size = SZ_128K,
+ }, {
+ .name = "bareboxenv2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 4 * SZ_1M,
+ }, {
+ .name = "rootfs",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
}
};
@@ -132,7 +205,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.partition_info = nand_partitions,
};
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
@@ -150,10 +223,36 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
.tdf_cycles = 2,
};
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+
static void __init ek_add_device_nand(void)
{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+ ek_nand_data.rdy_pin = AT91_PIN_PC13;
+ ek_nand_data.enable_pin = AT91_PIN_PC14;
+ }
+
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ if (machine_is_usb_a9g20())
+ sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ else
+ sam9_smc_configure(3, &usb_a9260_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -210,6 +309,19 @@ static struct gpio_led ek_leds[] = {
}
};
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rv3029c2", 0x56),
+ },
+};
+
+static void __init ek_add_device_leds(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_leds[0].active_low = 0;
+
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
static void __init ek_board_init(void)
{
@@ -218,22 +330,29 @@ static void __init ek_board_init(void)
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
- at91_add_device_udc(&ek_udc_data);
+ ek_add_device_udc();
/* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ ek_add_device_spi();
/* Ethernet */
- at91_add_device_eth(&ek_macb_data);
+ ek_add_device_eth();
/* NAND */
ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+ ek_add_device_leds();
+
+ if (machine_is_usb_a9g20()) {
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ } else {
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+ | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
+ }
}
MACHINE_START(USB_A9263, "CALAO USB_A9263")
@@ -244,3 +363,21 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263")
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+ /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd2aec..3c288b396fc 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -43,7 +44,6 @@
#include <mach/hardware.h>
#include <mach/board.h>
-#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4615528205c..224e9e2f867 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/debugfs.h>
@@ -22,9 +23,6 @@
#include <mach/hardware.h>
#include <mach/at91_pio.h>
-#include <mach/gpio.h>
-
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 056dc6674b6..2b9a1f51210 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -214,11 +214,6 @@ extern void at91_gpio_resume(void);
*/
#include <asm/errno.h>
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) (gpio)
#define irq_to_gpio(irq) (irq)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d97f14..85820ad801c 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK 133000000
+#else
#define AT91SAM9_MASTER_CLOCK 132096000
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839e1a..8dfafe76ffe 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -9,13 +9,13 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4159eca7894..7046158109d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,6 +10,7 @@
* (at your option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
@@ -25,7 +26,6 @@
#include <asm/mach/irq.h>
#include <mach/at91_pmc.h>
-#include <mach/gpio.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1ca2bb..495e31306fc 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
- gpio.o dma.o usb.o common.o sram.o aemif.o
+ dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
@@ -17,7 +17,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o
obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f822fc4..a6bf5dcaef1 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -19,7 +20,7 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed5c54..4aae01576aa 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
@@ -27,7 +28,7 @@
#include <mach/da8xx.h>
#include <mach/cpufreq.h>
#include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9c937..c143f43addc 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
@@ -30,6 +29,7 @@
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72d7d9..679e168dce3 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
@@ -34,7 +33,7 @@
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c271629..9a274665edc 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -26,6 +25,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e711a2b..03e5f4931b4 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
@@ -27,6 +26,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 00000000000..1fdd1fd3544
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DAVINCI_DAVINCI_GPIO_H
+#define __DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+ GPIO_TYPE_DAVINCI = 0,
+ GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip. For now, they won't be usable as IRQ sources.
+ */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+ struct gpio_chip chip;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *regs;
+ void __iomem *set_data;
+ void __iomem *clr_data;
+ void __iomem *in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+ struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+ int index = gpio / 32;
+
+ if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+ return NULL;
+
+ return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+ return 1 << (gpio % 32);
+}
+
+#endif /* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece126c2b..fbaae4772b9 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,10 @@
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
#include <asm-generic/gpio.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
- GPIO_TYPE_DAVINCI = 0,
- GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code may write GPIO(N). These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip. For now, they won't be usable as IRQ sources.
- */
-#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
- struct gpio_chip chip;
- int irq_base;
- spinlock_t lock;
- void __iomem *regs;
- void __iomem *set_data;
- void __iomem *clr_data;
- void __iomem *in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
- struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
- int index = gpio / 32;
-
- if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
- return NULL;
-
- return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
- return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
/*
* The get/set/clear functions will inline when called with constant
@@ -147,11 +77,6 @@ static inline int gpio_cansleep(unsigned gpio)
return __gpio_cansleep(gpio);
}
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd892a..409bb869c7c 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
@@ -27,9 +28,9 @@
#include <mach/psc.h>
#include <mach/cp_intc.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
#include "clock.h"
#include "mux.h"
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 83dce859886..a9e0dae86a2 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
void __init dove_spi1_init(void)
{
- orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+ orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
}
/*****************************************************************************
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18f643..97a249395b5 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@ config MACH_TS72XX
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
+config MACH_VISION_EP9307
+ bool "Support Vision Engraving Systems EP9307 SoM"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Vision Engraving Systems EP9307 SoM.
+
choice
prompt "Select a UART for early kernel messages"
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2d39e..574209d9e24 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index c60f081e930..94c78bc6627 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -38,6 +38,7 @@
#include <mach/fb.h>
#include <mach/ep93xx_keypad.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 257175edc57..c63a5ec1a8e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
index c57152c231f..8aff2ea3587 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
@@ -1,9 +1,7 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gpio.h
- */
+/* Include file for the EP93XX GPIO controller machine specifics */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
@@ -99,22 +97,4 @@
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/*
- * Map GPIO A0..A7 (0..7) to irq 64..71,
- * B0..B7 (7..15) to irq 72..79, and
- * F0..F7 (16..24) to irq 80..87.
- */
-#define gpio_to_irq(gpio) \
- (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
-
-#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
-
-#endif
+#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 238bc603da8..d6f286b4db9 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 3bdf3a2e5ad..2b4d4b0201d 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/fb.h>
@@ -30,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 00000000000..d96e4dbec6a
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE 0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+ {
+ .virtual = VISION_VIRT_BASE,
+ .pfn = __phys_to_pfn(VISION_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init vision_map_io(void)
+{
+ ep93xx_map_io();
+
+ iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+ int err;
+
+ err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+ EP93XX_SYSCON_DEVCFG_RASONP3 |
+ EP93XX_SYSCON_DEVCFG_EXVC);
+
+ return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+ gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+ if (blank_mode)
+ gpio_set_value(VISION_LCD_ENABLE, 0);
+ else
+ gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+ .setup = vision_lcd_setup,
+ .teardown = vision_lcd_teardown,
+ .blank = vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+ .gpio_base = PCA9539_74_GPIO_BASE,
+ .irq_base = EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+ .gpio_base = PCA9539_75_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+ .gpio_base = PCA9539_76_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+ .gpio_base = PCA9539_77_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = IRQ_EP93XX_EXT1,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &pca953x_74_gpio_data,
+ .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x75),
+ .platform_data = &pca953x_75_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x76),
+ .platform_data = &pca953x_76_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x77),
+ .platform_data = &pca953x_77_gpio_data,
+ },
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+ {
+ .name = "SPI bootstrap",
+ .offset = 0,
+ .size = SZ_4K,
+ }, {
+ .name = "Bootstrap config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4K,
+ }, {
+ .name = "System config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+ .name = "SPI Flash",
+ .parts = vision_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+ .setup = vision_spi_flash_hw_setup,
+ .cleanup = vision_spi_flash_hw_cleanup,
+ .cs_control = vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+ { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+ { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+ irqreturn_t (*func)(int, void *), void *pdata)
+{
+ int err;
+
+ err = gpio_request_array(vision_spi_mmc_gpios,
+ ARRAY_SIZE(vision_spi_mmc_gpios));
+ if (err)
+ return err;
+
+ err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+ if (err)
+ goto exit_err;
+
+ err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+ IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+ if (err)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+ return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+ free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+ return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+ return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+ .init = vision_spi_mmc_init,
+ .exit = vision_spi_mmc_exit,
+ .get_ro = vision_spi_mmc_get_ro,
+ .get_cd = vision_spi_mmc_get_cd,
+ .detect_delay = 100,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+ .setup = vision_spi_mmc_hw_setup,
+ .cleanup = vision_spi_mmc_hw_cleanup,
+ .cs_control = vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+ {
+ .modalias = "sst25l",
+ .platform_data = &vision_spi_flash_data,
+ .controller_data = &vision_spi_flash_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "mmc_spi",
+ .platform_data = &vision_spi_mmc_data,
+ .controller_data = &vision_spi_mmc_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+ .num_chipselect = ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+ ep93xx_register_eth(&vision_eth_data, 1);
+ ep93xx_register_fb(&ep93xxfb_info);
+ ep93xx_register_pwm(1, 0);
+
+ /*
+ * Request the gpio expander's interrupt gpio line now to prevent
+ * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+ */
+ if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+ "pca9539:74"))
+ pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+ ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+ ARRAY_SIZE(vision_i2c_info));
+ ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+ ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .map_io = vision_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab99fa1..fec23859388 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -15,6 +15,16 @@ config CPU_EXYNOS4210
help
Enable EXYNOS4210 CPU support
+config SOC_EXYNOS4212
+ bool
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool
+ help
+ Enable EXYNOS4412 SoC support
+
config EXYNOS4_MCT
bool
default y
@@ -111,24 +121,11 @@ config EXYNOS4_SETUP_USB_PHY
menu "EXYNOS4 Machines"
+comment "EXYNOS4210 Boards"
+
config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
@@ -218,6 +215,48 @@ config MACH_NURI
help
Machine support for Samsung Mobile NURI Board.
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC2
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+
endmenu
comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7b0b1..c9b2e1f97e4 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@ obj- :=
# Core support for EXYNOS4 system
-obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@@ -25,11 +27,15 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
# device support
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 00000000000..b9d5ef670eb
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKSRC_LCD1),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_LCD1),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+ /* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "sataphy",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+ return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+ .suspend = exynos4210_clock_suspend,
+ .resume = exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+ int ptr;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+ clk_mout_mpll.reg_src.shift = 8;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 00000000000..77d5decb34f
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+ .sources = clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &clk_src_mpll_user,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+ /* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+ /* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+ return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+ .suspend = exynos4212_clock_suspend,
+ .resume = exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+ int ptr;
+
+ /* usbphy1 is removed */
+ clkset_group_list[4] = NULL;
+
+ /* mout_mpll_user is used */
+ clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+ clk_mout_mpll.reg_src.shift = 12;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 1561b036a9b..0d59be3fa1f 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -20,26 +21,93 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
-
-static struct clk clk_sclk_hdmi27m = {
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
@@ -58,12 +126,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
@@ -103,12 +166,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
@@ -133,7 +196,7 @@ static struct clksrc_clk clk_mout_apll = {
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
@@ -141,7 +204,7 @@ static struct clksrc_clk clk_sclk_apll = {
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
@@ -149,12 +212,13 @@ static struct clksrc_clk clk_mout_epll = {
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+ /* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@ static struct clksrc_clk clk_periphclk = {
/* Core list of CMU_CORE side */
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
@@ -284,12 +348,12 @@ static struct clksrc_clk clk_pclk_acp = {
/* Core list of CMU_TOP side */
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
@@ -321,7 +385,7 @@ static struct clksrc_clk clk_aclk_160 = {
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
@@ -360,7 +424,7 @@ static struct clksrc_sources clkset_sclk_vpll = {
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
@@ -410,16 +474,6 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sataphy",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
@@ -449,11 +503,6 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
.name = "pdma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@ static struct clk init_clocks[] = {
}
};
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@ static struct clk *clkset_group_list[] = {
[8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
@@ -899,8 +948,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.0",
+ .name = "sclk_cam0",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 16),
},
@@ -909,8 +957,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "exynos4-fimc.1",
+ .name = "sclk_cam1",
.enable = exynos4_clksrc_mask_cam_ctrl,
.ctrlbit = (1 << 20),
},
@@ -969,25 +1016,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
@@ -1116,7 +1144,13 @@ static int xtal_rate;
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
@@ -1126,10 +1160,10 @@ static struct clk_ops exynos4_fout_apll_ops = {
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
@@ -1153,14 +1187,29 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650);
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
@@ -1195,6 +1244,28 @@ static struct clk *clks[] __initdata = {
/* Nothing here yet */
};
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
void __init exynos4_register_clocks(void)
{
int ptr;
@@ -1210,5 +1281,6 @@ void __init exynos4_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ register_syscore_ops(&exynos4_clock_syscore_ops);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc6d39..a348434f17b 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
+unsigned int gic_bank_offset __read_mostly;
+
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -121,6 +118,24 @@ static struct map_desc exynos4_iodesc[] __initdata = {
},
};
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static void exynos4_idle(void)
{
if (!need_resched())
@@ -143,6 +158,11 @@ void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@@ -170,24 +190,37 @@ void __init exynos4_init_clocks(int xtal)
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
exynos4_register_clocks();
exynos4_setup_clocks();
}
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
@@ -223,7 +256,11 @@ static int __init exynos4_l2x0_cache_init(void)
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
/* L2X0 Prefetch Control */
__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 006a4f4c65c..f5e9fd8e37b 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
+ mov \tmp, #0
+
+ mrc p15, 0, \base, c0, c0, 5
+ and \base, \base, #3
+ cmp \base, #0
+ beq 1f
+
+ ldr \tmp, =gic_bank_offset
+ ldr \tmp, [\tmp]
+ cmp \base, #1
+ beq 1f
+
+ cmp \base, #2
+ addeq \tmp, \tmp, \tmp
+ addne \tmp, \tmp, \tmp, LSL #1
+
+1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
- mrc p15, 0, \tmp, c0, c0, 5
- and \tmp, \tmp, #3
- cmp \tmp, #1
- addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+ add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 00000000000..a07fcbf5525
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index be9266b10fd..80523ca9bb4 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
/* GPIO bank sizes */
@@ -151,6 +146,4 @@ enum s5p_gpio_number {
#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8f375..2d3f6bcd9bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296dc65e..9f97eb8499e 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -61,7 +62,6 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb422f..6c37ebe9482 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+#include <plat/cpu.h>
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
-
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C930) : \
+ S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C960) : \
+ S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14004) : \
+ S5P_CLKREG(0x10008))
#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14108) : \
+ S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x1410C) : \
+ S5P_CLKREG(0x1010C))
#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c8434b02..80dd02ad6d6 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 00000000000..b5f6f38557c
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 00000000000..fcf2e0e23d5
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+ REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_SMDK4X12",
+ .min_uV = 925000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
+ .regulators = smdk4x12_max8997_regulators,
+
+ .buck1_voltage[0] = 1100000, /* 1.1V */
+ .buck1_voltage[1] = 1100000, /* 1.1V */
+ .buck1_voltage[2] = 1100000, /* 1.1V */
+ .buck1_voltage[3] = 1100000, /* 1.1V */
+ .buck1_voltage[4] = 1100000, /* 1.1V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1100000, /* 1.1V */
+ .buck5_voltage[1] = 1100000, /* 1.1V */
+ .buck5_voltage[2] = 1100000, /* 1.1V */
+ .buck5_voltage[3] = 1100000, /* 1.1V */
+ .buck5_voltage[4] = 1100000, /* 1.1V */
+ .buck5_voltage[5] = 1100000, /* 1.1V */
+ .buck5_voltage[6] = 1100000, /* 1.1V */
+ .buck5_voltage[7] = 1100000, /* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", 0x66),
+ .platform_data = &smdk4x12_max8997_pdata,
+ }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+ KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+ .keymap = smdk4x12_keymap,
+ .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+ .keymap_data = &smdk4x12_keymap_data,
+ .rows = 2,
+ .cols = 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c3,
+ &s3c_device_i2c7,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+ clk_xusbxti.rate = 24000000;
+
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
+ s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, smdk4x12_i2c_devs0,
+ ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, smdk4x12_i2c_devs1,
+ ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, smdk4x12_i2c_devs3,
+ ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+ s3c_i2c7_set_platdata(NULL);
+ i2c_register_board_info(7, smdk4x12_i2c_devs7,
+ ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+ samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+ samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+ s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+ platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index b24ddd7ad8f..00000000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
- .win[0] = &smdkc210_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
- .resource = smdkc210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &s5p_device_fimd0,
- &smdkc210_lcd_lte480wv,
- &smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkc210_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
- samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
- s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
- platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkc210_map_io,
- .init_machine = smdkc210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index d90fcddbee1..2c1a076c6a7 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
@@ -112,6 +117,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
};
@@ -248,6 +316,7 @@ static void __init smdkv310_machine_init(void)
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -261,3 +330,12 @@ MACHINE_START(SMDKV310, "SMDKV310")
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 85a1bb79f11..f191608b28d 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
#include <linux/delay.h>
#include <linux/percpu.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
+static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
+ char name[10];
};
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
static void exynos4_mct_write(unsigned int value, void *addr)
{
@@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr)
__raw_writel(value, addr);
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 16; /* G_TCON write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 0; /* G_COMP0_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 1; /* G_COMP0_U write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 0; /* G_CNT_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 1; /* G_CNT_U write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L0_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L1_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L0_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L1_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L0_ICNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L1_ICNTB write status */
- break;
- default:
- return;
+ if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+ u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+ switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+ case (u32) MCT_L_TCON_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case (u32) MCT_L_ICNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case (u32) MCT_L_TCNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
}
/* Wait maximum 1 ms until written values are applied */
@@ -132,12 +140,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
return ((cycle_t)hi << 32) | lo;
}
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+ exynos4_mct_frc_start(0, 0);
+}
+
struct clocksource mct_frc = {
.name = "mct-frc",
.rating = 400,
.read = exynos4_frc_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .resume = exynos4_frc_resume,
};
static void __init exynos4_clocksource_init(void)
@@ -315,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
}
}
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
- struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
/*
@@ -329,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
@@ -354,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
mct_tick[cpu].evt = evt;
- if (cpu == 0) {
- mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
- evt->name = "mct_tick0";
- } else {
- mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
- evt->name = "mct_tick1";
- }
+ mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+ evt->name = mct_tick[cpu].name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
@@ -378,22 +400,28 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
- if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ if (mct_int_type == MCT_INT_SPI) {
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ }
} else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ gic_enable_ppi(IRQ_MCT_LOCALTIMER);
}
}
/* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
exynos4_mct_tick_init(evt);
+
+ return 0;
}
void local_timer_stop(struct clock_event_device *evt)
@@ -414,6 +442,11 @@ static void __init exynos4_timer_resources(void)
static void __init exynos4_timer_init(void)
{
+ if (soc_is_exynos4210())
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index a08c536923f..782dcf11d23 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock);
static void __cpuinit exynos4_gic_secondary_init(void)
{
void __iomem *dist_base = S5P_VA_GIC_DIST +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
int i;
/*
@@ -106,6 +110,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
+
+ set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -214,5 +220,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
}
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca9482de..62e4f436300 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
@@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4210_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+};
+
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(S5P_EPLL_CON0),
SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = {
};
static struct sleep_save exynos4_core_save[] = {
- /* CMU side */
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void)
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+ if (soc_is_exynos4210())
+ s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
}
static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c
index 1ee0ebff111..7862bfb5933 100644
--- a/arch/arm/mach-exynos4/setup-keypad.c
+++ b/arch/arm/mach-exynos4/setup-keypad.c
@@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
if (rows > 8) {
/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
/* Set all the necessary GPX3 pins: KP_ROW[8~] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
} else {
/* Set all the necessary GPX2 pins: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
- S3C_GPIO_SFN(3));
+ s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+ S3C_GPIO_PULL_UP);
}
/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
index 3bc2c70f298..40a0527bada 100644
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -13,11 +13,6 @@
#define __MACH_GPIO_H__
#include <mach/irqs.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index cf8f8099ebd..82bd4403b45 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -17,13 +17,12 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
/*
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index efe6109099f..635b0509068 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,7 +13,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -27,7 +27,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index b19ae180556..a20fb3f2bc4 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
static void __init ap_map_io(void)
{
iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+ vga_base = PCI_MEMORY_VADDR;
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index dd56bfb351e..11b86e5b71c 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,7 +27,6 @@
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
- vga_base = PCI_MEMORY_VADDR;
/*
* Hook in our fault handler for PCI errors
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4068166c899..59a512672bb 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -13,7 +13,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -39,7 +39,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static DEFINE_SPINLOCK(ixp2000_slowport_lock);
static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
index 4a88d2c33da..af836c76c3f 100644
--- a/arch/arm/mach-ixp2000/include/mach/gpio.h
+++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2002 Intel Corporation.
*
- * This program is free software, you can redistribute it and/or modify
+ * This program is free software, you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
@@ -11,7 +11,7 @@
/*
* IXP2000 GPIO in/out, edge/level detection for IRQs:
* IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
+ * or both Falling-edge and Rising-edge.
* This must be called *before* the corresponding IRQ is registerd.
* Use this instead of directly setting the GPIO registers.
* GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 235638f800e..634b6c852f6 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -14,6 +14,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
@@ -40,8 +41,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
-#include <mach/gpio.h>
-
+#include <mach/gpio-ixp2000.h>
/*************************************************************************
* IXDP2x00 IRQ Initialization
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5ae86..fd5e7b6881b 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@ config MACH_GTWX5715
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
+config MACH_DEVIXP
+ bool "Omicron DEVIXP"
+ help
+ Say 'Y' here if you want your kernel to support the DEVIXP
+ board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+ bool "Omicron MICCPT"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the MICCPT
+ board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+ bool "Omicron MIC256"
+ help
+ Say 'Y' here if you want your kernel to support the MIC256
+ board from OMICRON electronics GmbH.
+
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc367dd..eded94c96dd 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@ obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
@@ -25,6 +26,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.o
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
+obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 71607a7ecc7..8837fbca27c 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -16,7 +16,7 @@
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index a9540cd9037..2887c3578c1 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -14,7 +14,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -27,7 +27,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index a5f87ded2f2..83d6b4ed60b 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <linux/kernel.h>
#include <mach/hardware.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_request(unsigned gpio, const char *label)
{
return 0;
@@ -70,6 +72,7 @@ static inline void gpio_set_value(unsigned gpio, int value)
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int gpio_to_irq(int gpio);
+#define gpio_to_irq gpio_to_irq
extern int irq_to_gpio(unsigned int irq);
#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1dcdb..eb945a926d0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2())
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 00000000000..ca0bae7fca9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV 4
+#define IRQ_LINES 4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+
+void __init miccpt_pci_preinit(void)
+{
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[IRQ_LINES] = {
+ IXP4XX_GPIO_IRQ(INTA),
+ IXP4XX_GPIO_IRQ(INTB),
+ IXP4XX_GPIO_IRQ(INTC),
+ IXP4XX_GPIO_IRQ(INTD)
+ };
+
+ if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+ return pci_irq_table[(slot + pin - 2) % 4];
+
+ return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = miccpt_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+ if (machine_is_miccpt())
+ pci_common_init(&miccpt_pci);
+ return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 9f4669260d4..de716fa1aab 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -17,7 +17,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
@@ -32,7 +32,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <asm/gpio.h>
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 3676fbf6ef9..ac81ccb26bf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -16,7 +16,7 @@
* Maintainers: http://www.nslu2-linux.org/
*
*/
-
+#include <linux/gpio.h>
#include <linux/if_ether.h>
#include <linux/irq.h>
#include <linux/serial.h>
@@ -30,7 +30,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <asm/gpio.h>
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 00000000000..3b6a81a696f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ * Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition omixp_partitions[] = {
+ {
+ .name = "Recovery Bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ }, {
+ .name = "Calibration Data",
+ .size = 0x00020000,
+ .offset = 0x00020000,
+ }, {
+ .name = "Recovery FPGA",
+ .size = 0x00020000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Release Bootloader",
+ .size = 0x00020000,
+ .offset = 0x00060000,
+ }, {
+ .name = "Release FPGA",
+ .size = 0x00020000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Kernel",
+ .size = 0x00160000,
+ .offset = 0x000a0000,
+ }, {
+ .name = "Filesystem",
+ .size = 0x00C00000,
+ .offset = 0x00200000,
+ }, {
+ .name = "Persistent Storage",
+ .size = 0x00200000,
+ .offset = 0x00E00000,
+ },
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = omixp_partitions,
+ .nr_parts = ARRAY_SIZE(omixp_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device omixp_flash_device[] = {
+ {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &omixp_flash_data[0],
+ },
+ .resource = &omixp_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "IXP4XX-Flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &omixp_flash_data[1],
+ },
+ .resource = &omixp_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ * ttyS0 .. UART2
+ * ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ /* list termination */
+ }
+};
+
+static struct platform_device omixp_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = omixp_uart_data,
+ .num_resources = 2,
+ .resource = omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+ {
+ .name = "LED-A",
+ .gpio = 7,
+ },
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+ .num_leds = ARRAY_SIZE(mic256_led_pins),
+ .leds = mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ },
+};
+
+static struct platform_device ixdp425_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_eth,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_eth + 1,
+ },
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &mic256_leds,
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &omixp_flash_device[1],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+ ixp4xx_sys_init();
+
+ /* 16MiB Boot Flash */
+ omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+ omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
+
+ /* 32 MiB Data Flash */
+ omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ if (machine_is_devixp())
+ platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+ else if (machine_is_miccpt())
+ platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+ else if (machine_is_mic256())
+ platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 05d193a25b2..c4c68e5b94f 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,14 +7,13 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
-#include <asm/gpio.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index b0a7d979a8e..cc431fa22cc 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
#include "common.h"
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e8160ed3..853efd9133c 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -3,7 +3,7 @@
# Makefile for KS8695 architecture support
#
-obj-y := cpu.o irq.o time.o gpio.o devices.o
+obj-y := cpu.o irq.o time.o devices.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a5fcc7c7fe1..a91f99d265a 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -34,7 +34,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index fb91a716a7d..d24bcef2e2d 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -29,7 +29,7 @@
#include <asm/mach/irq.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8f67a750b6c..16c95657f8f 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -5,7 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -18,7 +18,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
#include <mach/devices.h>
#include "generic.h"
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d46cc..73bd6381287 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -20,6 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
new file mode 100644
index 00000000000..6eb034d6032
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_KS8659_GPIO_H
+#define __MACH_KS8659_GPIO_H
+
+#include <linux/kernel.h>
+
+#define KS8695_GPIO_0 0
+#define KS8695_GPIO_1 1
+#define KS8695_GPIO_2 2
+#define KS8695_GPIO_3 3
+#define KS8695_GPIO_4 4
+#define KS8695_GPIO_5 5
+#define KS8695_GPIO_6 6
+#define KS8695_GPIO_7 7
+#define KS8695_GPIO_8 8
+#define KS8695_GPIO_9 9
+#define KS8695_GPIO_10 10
+#define KS8695_GPIO_11 11
+#define KS8695_GPIO_12 12
+#define KS8695_GPIO_13 13
+#define KS8695_GPIO_14 14
+#define KS8695_GPIO_15 15
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
+
+#endif /* __MACH_KS8659_GPIO_H */
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 86312d476bc..f5fda36e451 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -11,47 +11,9 @@
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0 0
-#define KS8695_GPIO_1 1
-#define KS8695_GPIO_2 2
-#define KS8695_GPIO_3 3
-#define KS8695_GPIO_4 4
-#define KS8695_GPIO_5 5
-#define KS8695_GPIO_6 6
-#define KS8695_GPIO_7 7
-#define KS8695_GPIO_8 8
-#define KS8695_GPIO_9 9
-#define KS8695_GPIO_10 10
-#define KS8695_GPIO_11 11
-#define KS8695_GPIO_12 12
-#define KS8695_GPIO_13 13
-#define KS8695_GPIO_14 14
-#define KS8695_GPIO_15 15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
/*
* Map IRQ number to GPIO line.
*/
extern int irq_to_gpio(unsigned int irq);
-#include <asm-generic/gpio.h>
-
-/* If it turns out that we need to optimise GPIO access for the
- * Micrel's GPIOs, then these can be changed to check their argument
- * directly as static inlines. However for now it's probably not
- * worthwhile.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_to_irq __gpio_to_irq
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
#endif
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 184ef74e4be..d6f6502ac9b 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -7,14 +7,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/leds.h>
#include <mach/devices.h>
-#include <mach/gpio.h>
static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index a5fc5d0eeae..f5db805ab95 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -3,6 +3,6 @@
#
obj-y := timer.o irq.o common.o serial.o clock.o
-obj-y += gpiolib.o pm.o suspend.o
+obj-y += pm.o suspend.o
obj-y += phy3250.o
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
new file mode 100644
index 00000000000..1816e22a347
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
@@ -0,0 +1,50 @@
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 67d03da1eee..e69de29bb2d 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/gpio.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 9b621e14d16..6d2f0d1b937 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
#include "common.h"
/*
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5fa853c9..833c3a2784a 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -17,13 +17,13 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa168.h>
#include <mach/pxa168.h>
-#include <mach/gpio.h>
#include <video/pxa168fb.h>
#include <linux/input.h>
#include <plat/pxa27x_keypad.h>
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index c79162a50f2..e411252e3d3 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 98e25d9aaab..32776f3739f 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,11 +9,11 @@
*/
#include <linux/init.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
new file mode 100644
index 00000000000..c017a983ece
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_GPIO_PXA_H
+#define __ASM_MACH_GPIO_PXA_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio-pxa.h>
+
+#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 7bfb827f3fe..681262359d1 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -1,36 +1,13 @@
#ifndef __ASM_MACH_GPIO_H
#define __ASM_MACH_GPIO_H
-#include <mach/addr-map.h>
-#include <mach/irqs.h>
#include <asm-generic/gpio.h>
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
-
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 5d6421d6325..8bfac661262 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c18861d5..65d8689e40c 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -25,7 +24,7 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 0156f535dae..50c1763911f 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1464607aa60..4ebbfbba39f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,7 +19,7 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index c296b75c445..eb5be879fd8 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -7,18 +7,18 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
-#include <mach/gpio.h>
#include "common.h"
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index a80765533f1..6d84ee740df 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -13,7 +13,7 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <mach/vreg.h>
#include <mach/mpp.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index bb72ea0383b..71de5062c71 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -31,7 +31,6 @@
#include <asm/memory.h>
#include <asm/setup.h>
-#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 51109b1f434..7e8909c978c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -32,7 +32,6 @@
#include <mach/board.h>
#include <mach/irqs.h>
#include <mach/sirc.h>
-#include <mach/gpio.h>
#include <mach/vreg.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index dc0bcb5a6b9..afa9293d580 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -11,7 +11,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,7 +22,6 @@
#include <linux/delay.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index f7a9724788b..8650342b749 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mmc.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <linux/debugfs.h>
-#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 729bb49a44c..25105c1027f 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -11,7 +11,6 @@
#include <linux/err.h>
#include <asm/io.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <mach/msm_fb.h>
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 36ad50d3bfa..40a8c178f10 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -1,26 +1 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_MSM_GPIO_H
-#define __ASM_ARCH_MSM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __ASM_ARCH_MSM_GPIO_H */
+/* empty */
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 3e24431bb5e..e421b701663 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -7,12 +7,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/irq.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 59b7686b920..cf4e494d44b 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -7,13 +7,12 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231ee53..ea5ec0f3b5b 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -64,8 +64,25 @@ config MODULE_TX28
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
+config MODULE_M28
+ bool
+ select SOC_IMX28
+ select LEDS_GPIO_REGISTER
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_FEC
+ select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_OCOTP
+
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
+config MACH_M28EVK
+ bool "Support DENX M28EVK Platform"
+ select MODULE_M28
+
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 6c38262a3aa..adcfb4e4510 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5dcc59d5b9e..31223106ad6 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -738,11 +738,17 @@ static int clk_misc_init(void)
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
- /* Extra fec clock setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- reg &= ~BM_CLKCTRL_ENET_SLEEP;
- reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * Extra fec clock setting
+ * The DENX M28 uses an external clock source
+ * and the clock output must not be enabled
+ */
+ if (!machine_is_m28evk()) {
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ reg &= ~BM_CLKCTRL_ENET_SLEEP;
+ reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ }
/*
* 480 MHz seems too high to be ssp clock source directly,
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
index 828ccccb6aa..bb11e63261e 100644
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -20,16 +20,8 @@
#ifndef __MACH_MXS_GPIO_H__
#define __MACH_MXS_GPIO_H__
-#include <asm-generic/gpio.h>
-
#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
#endif /* __MACH_MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 35a89dd2724..05823187ec0 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
+ machine_is_m28evk() || \
machine_is_tx28() || \
0)
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf653964..67776746f14 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
+ case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 00000000000..3b1681e4f49
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+ /* auart0 */
+ MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+ /* auart3 */
+ MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+ /* fec1 */
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+ /* flexcan0 */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* flexcan1 */
+ MX28_PAD_GPMI_CE2N__CAN1_TX,
+ MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* mxsfb (lcdif) */
+ MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+ MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+ /* nand */
+ MX28_PAD_GPMI_D00__GPMI_D0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D01__GPMI_D1 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D02__GPMI_D2 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D03__GPMI_D3 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D04__GPMI_D4 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D05__GPMI_D5 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D06__GPMI_D6 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D07__GPMI_D7 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_ALE__GPMI_ALE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_CLE__GPMI_CLE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+ /* Backlight */
+ MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+ {
+ .name = "user-led1",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED1,
+ },
+ {
+ .name = "user-led2",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED2,
+ },
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+ .leds = m28evk_leds,
+ .num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+ {
+ /* fec0 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ }, {
+ /* fec1 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ },
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+ int i;
+ u32 val;
+ const u32 *ocotp = mxs_get_ocotp();
+
+ if (!ocotp) {
+ pr_err("%s: timeout when reading fec mac from OCOTP\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code DENX OUI (C0:E5:4E) here.
+ */
+ for (i = 0; i < 2; i++) {
+ val = ocotp[i * 4];
+ mx28_fec_pdata[i].mac[0] = 0xC0;
+ mx28_fec_pdata[i].mac[1] = 0xE5;
+ mx28_fec_pdata[i].mac[2] = 0x4E;
+ mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+ mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+ mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+ }
+
+ return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+ {
+ .name = "Ampire AM-800480R2TMQW-T01H",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30066, /* picosecond (33.26 MHz) */
+ .left_margin = 0,
+ .right_margin = 256,
+ .upper_margin = 0,
+ .lower_margin = 45,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
+ },
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+ .mode_list = m28evk_video_modes,
+ .mode_count = ARRAY_SIZE(m28evk_video_modes),
+ .default_bpp = 16,
+ .ld_intf_width = STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+ .byte_len = 16384,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+ {
+ I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
+ .platform_data = &m28evk_eeprom,
+ },
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
+static void __init m28evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+ mx28_add_duart();
+ mx28_add_auart0();
+ mx28_add_auart3();
+
+ if (!m28evk_fec_get_mac()) {
+ mx28_add_fec(0, &mx28_fec_pdata[0]);
+ mx28_add_fec(1, &mx28_fec_pdata[1]);
+ }
+
+ mx28_add_flexcan(0, NULL);
+ mx28_add_flexcan(1, NULL);
+
+ mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+ mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+ mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &m28evk_led_data);
+
+ /* I2C */
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+ ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+ .init = m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .init_machine = m28evk_init,
+ .timer = &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 398a75f62be..0cbb74c96ef 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index ac58e3b03b1..dc67717db6f 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,8 +21,8 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index abfe25a08d6..0fc2f6f1cc9 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -3,8 +3,8 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <plat/gpio-nomadik.h>
/*
* There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 7a81a042034..efdde0ae0a4 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,6 +1,4 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index eb36b25450a..4ea60e2038e 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -30,7 +30,6 @@
#include <plat/io.h>
#include <plat/board-ams-delta.h>
-#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 999789c4811..31e089b6f03 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 23cc9e4ad50..05c6e9d858f 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -22,7 +22,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index f2fc43d8382..da0e37d4082 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 6c70c28d055..c2e279173d4 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -18,7 +18,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -32,7 +32,6 @@
#include <linux/smc91x.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 2098525e7cc..f8242aa9b76 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -11,13 +11,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 8e2b64a4692..8f5b6af7ed5 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -13,7 +13,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/major.h>
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index e81ead1c89e..fcd1a3c3189 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,7 +23,6 @@
* 02110-1301, USA.
*
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 8b034594fbc..c2234caf8a7 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -15,7 +15,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <plat/mux.h>
#include <plat/flash.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 6825635ac68..02789c5d370 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mutex.h>
@@ -26,7 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 44b8e9362bf..e4dca1deebb 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -42,7 +42,6 @@
#include <linux/i2c/tps65010.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 3d8cd90b1db..50c4e398bcc 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -16,7 +16,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -33,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d0eefe81cd1..273771cb1b6 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -12,6 +12,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -30,7 +31,6 @@
#include <asm/mach/map.h>
#include <plat/led.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 98e79bc0921..de36ade38ef 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -15,6 +15,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -32,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index ad3a1567604..04b1befaced 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/flash.h>
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index e8ddd86e3fd..b59f78850e6 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,11 +12,11 @@
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 602b55c39d3..2bea941741d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -14,7 +14,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 80165154617..940faed82be 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -13,6 +13,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -33,7 +34,6 @@
#include <plat/board-voiceblue.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 36f26c3fa25..7c50ecf6812 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -10,6 +10,7 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +25,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index cddbf8b089c..0a17a1a7e00 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -17,6 +17,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -28,7 +29,6 @@
#include <asm/mach/irq.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
static void fpga_mask_irq(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e2b9c901ab6..e5b104b7fce 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,7 +35,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -45,7 +45,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
#include <plat/cpu.h>
#define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index b4f9be52e1e..4b818eb9f91 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -9,6 +9,7 @@
* The "surfer" expansion board and H2 sample board also have two-color
* green+red LEDs (in parallel), used here for timer and idle indicators.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sched.h>
@@ -20,7 +21,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 499d7ad8697..da09f436497 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -3,14 +3,13 @@
*
* LED driver for OSK with optional Mistral QVGA board
*/
+#include <linux/gpio.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/gpio.h>
-
#include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 22eb11dde9e..ae6dd93b8dd 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -3,13 +3,13 @@
*
* OMAP LEDs dispatcher
*/
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <mach/gpio.h>
#include <plat/mux.h>
#include "leds.h"
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 550ca9d9991..93ae8f29727 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +24,6 @@
#include <plat/board.h>
#include <plat/mux.h>
-#include <mach/gpio.h>
#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 25642697281..4431ad36456 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,7 +15,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
@@ -25,7 +25,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a58c6ba06f7..82421a4cfa9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index edf752bb24b..abe8c7e496a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -34,7 +34,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad663f9..5391079c868 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -26,7 +26,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mcbsp.h>
-#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88432aba972..4b79a80d5e1 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e5c1663fc4..343f60e9639 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -13,7 +13,7 @@
* License, or (at your option) any later version.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -30,7 +30,6 @@
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 43cf8bc9767..b1b45fff776 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -9,12 +9,11 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 9115511dc03..d3cd3f63258 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b3356ada64b..201ae367628 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -7,7 +7,7 @@
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <mach/orion5x.h>
#include "common.h"
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 8c876664f49..ebd6767d8e8 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 994644f59d8..05db2d336b0 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 1903d25ecae..e47fa0578ae 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -9,7 +9,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index e06fdae77f0..64317251ec0 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -7,7 +7,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -21,7 +21,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 306183273eb..29f1526f7b7 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 3dbcd5ed77e..31e51f9b4b6 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -23,7 +23,6 @@
#include <linux/serial_reg.h>
#include <linux/ata_platform.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 23c9e2e5e55..0fbcc14e09d 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -11,7 +11,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -25,7 +25,6 @@
#include <linux/i2c.h>
#include <linux/serial_reg.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1c63a76f3ca..b8be7d8d0cf 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -17,7 +17,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 4fd9f18c9d5..faf81a03936 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -5,7 +5,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -20,7 +20,6 @@
#include <linux/input.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index f219914f5b2..d3e71d3847b 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -13,14 +13,13 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
/* register definitions */
#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
index 9591467eb9e..41027dd7cf7 100644
--- a/arch/arm/mach-pnx4008/include/mach/gpio.h
+++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-pnx4008/include/mach/gpio.h
+ * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
*
* PNX4008 GPIO driver - header file
*
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index f40961e5191..374c138ac1a 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/io.h>
@@ -19,8 +18,8 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
#include <mach/clock.h>
#define UART_3 0
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 93f59f877fc..be751470d37 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index f5d91efc296..5432ecb15de 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +27,6 @@
#include <asm/mach-types.h>
#include <mach/reset.h>
-#include <mach/gpio.h>
#include <mach/smemc.h>
#include <mach/pxa3xx-regs.h>
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
new file mode 100644
index 00000000000..41b4c93a96c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -0,0 +1,133 @@
+/*
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __MACH_PXA_GPIO_PXA_H
+#define __MACH_PXA_GPIO_PXA_H
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio-pxa.h>
+#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c4639502efc..004cade7bb1 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,84 +24,10 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <asm-generic/gpio.h>
+/* The defines for the driver are needed for the accelerated accessors */
+#include "gpio-pxa.h"
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
static inline int irq_to_gpio(unsigned int irq)
@@ -118,37 +44,5 @@ static inline int irq_to_gpio(unsigned int irq)
return -1;
}
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 2a5726c15e0..b6238cbd8ae 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ca607571782..8d9200f9226 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -23,7 +22,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 16df0fc0879..64540d90895 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -39,7 +39,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696bfc13..c48ce6da918 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -42,7 +43,6 @@
#include <asm/hardware/sa1111.h>
#include <mach/pxa25x.h>
-#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index cc6e14f6d11..0567d3965fd 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -12,7 +12,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -43,7 +43,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b27544bcafc..43a5f6861ca 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -12,15 +12,15 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/syscore_ops.h>
-#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
+#include <mach/gpio-pxa.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d5b7e06212..9a9c539f6c0 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -19,7 +19,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -28,7 +28,6 @@
#include <media/soc_camera.h>
-#include <asm/gpio.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9c434d21a27..8746e1090b6 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -23,12 +24,12 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9d2400b5f50..2bb5cf8ba6e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,13 +21,13 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/suspend.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b5cd9e5aba3..f940a134553 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,7 +12,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -26,7 +25,7 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 0ee166b61f8..51371b39d2a 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -21,7 +20,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 5ce340320ab..3c988b6f718 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -9,12 +9,13 @@
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -23,7 +24,6 @@
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/mfp-pxa930.h>
-#include <mach/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
index 94ff27678a4..40a8c178f10 100644
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index f7f6b07df30..6fac70f3484 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -11,11 +11,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* some boards require extra gpio capacity to support external
* devices that need GPIO.
*/
@@ -28,7 +23,6 @@
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
-#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index 97e42bfce81..fc897d3a056 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x))
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index a1a7176675b..38058af4897 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
unsigned long clkcon0;
clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+ clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
__raw_writel(clkcon0, S3C2443_CLKDIV0);
}
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 8dc05763a7e..c7047838e11 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -44,16 +44,16 @@ static const char name_s3c6410[] = "S3C6410";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x36400000,
- .idmask = 0xfffff000,
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_clocks = s3c6400_init_clocks,
.init_uarts = s3c6400_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
- .idcode = 0x36410100,
- .idmask = 0xffffff00,
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_clocks = s3c6410_init_clocks,
.init_uarts = s3c6410_init_uarts,
@@ -141,23 +141,15 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
init_consistent_dma_size(SZ_8M);
- idcode = __raw_readl(S3C_VA_SYS + 0x118);
- if (!idcode) {
- /* S3C6400 has the ID register in a different place,
- * and needs a write before it can be read. */
-
- __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
- idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
- }
+ /* detect cpu id */
+ s3c64xx_init_cpu();
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
index 0d46e994048..6e34c2f6e67 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -12,11 +12,6 @@
* published by the Free Software Foundation.
*/
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
@@ -96,5 +91,3 @@ enum s3c_gpio_number {
#define BOARD_NR_GPIOS 16
#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
-
-#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index dcf2d73b478..7b66ede9fbc 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
.cols = 8,
};
-static int smdk6410_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(S3C64XX_GPF(15), "Backlight");
- if (ret) {
- printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
- return ret;
- }
-
- /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
- s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
- gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
- .pwm_id = 1,
- .max_brightness = 255,
- .dft_brightness = 255,
- .pwm_period_ns = 78770,
- .init = smdk6410_backlight_init,
- .exit = smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &s3c_device_timer[1].dev,
- .platform_data = &smdk6410_backlight_data,
- },
-};
-
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e82632..1fd9c79c7db 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
+#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
@@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = {
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
- unsigned int id;
struct s3c64xx_spi_info *pd;
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
switch (cntrlr) {
case 0:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944b347..0e5b3e63e5b 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
@@ -133,11 +134,7 @@ static struct platform_device s5p64x0_device_pdma = {
static int __init s5p64x0_dma_init(void)
{
- unsigned int id;
-
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
- if (id == 0x50000)
+ if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b004e7..700dac6c43f 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
static int __init s5p64x0_gpiolib_init(void)
{
- unsigned int chipid;
-
- chipid = __raw_readl(S5P64X0_SYS_ID);
-
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
- if ((chipid & 0xff000) == 0x50000) {
+ if (soc_is_s5p6450()) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index adb5f298ead..06cd3c9b16a 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5P6440_GPIO_A_NR (6)
@@ -134,6 +129,4 @@ enum s5p6450_gpio_number {
#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f5c3c..494e1a8f6f6 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
@@ -67,7 +68,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12d9b4..5e1a924b595 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -15,11 +15,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* GPIO bank sizes */
#define S5PC100_GPIO_A0_NR (8)
#define S5PC100_GPIO_A1_NR (5)
@@ -146,6 +141,4 @@ enum s5p_gpio_number {
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e607bcc..f5f8fa89679 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.0",
+ .name = "sclk_cam0",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 3),
},
@@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
}, {
.clk = {
- .name = "sclk_cam",
- .devname = "s5pv210-fimc.1",
+ .name = "sclk_cam1",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 4),
},
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index a5a1e331f8e..6c8b903c02e 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -13,11 +13,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
/* GPIO bank sizes */
@@ -142,6 +137,4 @@ enum s5p_gpio_number {
#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 41252d22e65..73a5c643179 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e21f3470eec..5fa5ae1f39e 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -9,6 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
-#include <asm/gpio.h>
#include "generic.h"
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 7befc104e9a..703631887c9 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -28,6 +28,8 @@
#include <asm/irq.h>
#include <asm-generic/gpio.h>
+#define __ARM_GPIOLIB_COMPLEX
+
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
@@ -51,7 +53,5 @@ static inline void gpio_set_value(unsigned gpio, int value)
#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
(IRQ_GPIO11 - 11 + gpio))
-#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
- (irq - IRQ_GPIO11 + 11))
#endif
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 2b1bb9e43dd..7bf0890e16b 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -18,31 +18,15 @@
#ifdef CONFIG_GPIOLIB
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned int irq)
{
return -ENOSYS;
}
+#else
+
+#define __ARM_GPIOLIB_COMPLEX
+
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 9c27b95b8d8..6db7d699ef1 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -24,12 +24,10 @@
#include <mach/pinmux.h>
#include "board.h"
+#include "board-harmony.h"
#ifdef CONFIG_TEGRA_PCI
-/* GPIO 3 of the PMIC */
-#define EN_VDD_1V05_GPIO (TEGRA_NR_GPIOS + 2)
-
static int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
@@ -38,11 +36,11 @@ static int __init harmony_pcie_init(void)
if (!machine_is_harmony())
return 0;
- err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05");
+ err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
- gpio_direction_output(EN_VDD_1V05_GPIO, 1);
+ gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
regulator = regulator_get(NULL, "pex_clk");
if (IS_ERR_OR_NULL(regulator))
@@ -68,7 +66,7 @@ err_pcie:
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
- gpio_free(EN_VDD_1V05_GPIO);
+ gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
return err;
}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index a4d1980e697..58352259787 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -117,6 +118,7 @@ static struct platform_device *harmony_devices[] __initdata = {
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
+ &tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
@@ -140,6 +142,7 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
+ { "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
index d85142edaf6..139d96c9384 100644
--- a/arch/arm/mach-tegra/board-harmony.h
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_HARMONY_H
#define _MACH_TEGRA_BOARD_HARMONY_H
+#include <mach/gpio-tegra.h>
+
#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_))
@@ -31,6 +33,7 @@
#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PW2
#define TEGRA_GPIO_INT_MIC_EN TEGRA_GPIO_PX0
#define TEGRA_GPIO_EXT_MIC_EN TEGRA_GPIO_PX1
+#define TEGRA_GPIO_EN_VDD_1V05_GPIO HARMONY_GPIO_TPS6586X(2)
void harmony_pinmux_init(void);
int harmony_regulator_init(void);
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627dd87..22257697d3e 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,9 @@ static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
{ .gpio = TEGRA_ULPI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_PWRN, .enable = true },
+ { .gpio = TEGRA_WIFI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_LED, .enable = true },
};
void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 3197c4cbaa7..39363e583c6 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
@@ -45,10 +46,22 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
+ /* serial port on JP1 */
+ .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
+ .mapbase = TEGRA_UARTA_BASE,
+ .irq = INT_UARTA,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 216000000,
+ }, {
+ /* serial port on mini-pcie */
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -65,10 +78,48 @@ static struct platform_device debug_uart = {
},
};
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+ .name = "wifi_rfkill",
+ .reset_gpio = TEGRA_WIFI_RST,
+ .shutdown_gpio = TEGRA_WIFI_PWRN,
+ .type = RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wifi_rfkill_platform_data,
+ },
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "wifi-led",
+ .default_trigger = "rfkill0",
+ .gpio = TEGRA_WIFI_LED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
- &tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_sdhci_device1,
+ &wifi_rfkill_device,
+ &leds_gpio,
};
static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@ static void __init tegra_paz00_fixup(struct machine_desc *desc,
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
+ { "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
+
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "usbd", "clk_m", 12000000, false },
+ { "usb2", "clk_m", 12000000, false },
+ { "usb3", "clk_m", 12000000, false },
+
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39ddaeb..8aff06eb58c 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,11 +17,21 @@
#ifndef _MACH_TEGRA_BOARD_PAZ00_H
#define _MACH_TEGRA_BOARD_PAZ00_H
+#include <mach/gpio-tegra.h>
+
+/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+
+/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
+/* WIFI */
+#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
+
void paz00_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495e974..74f78b7e3f1 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -49,7 +49,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -133,7 +133,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -167,6 +167,8 @@ static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_USB1, .enable = true },
};
void __init seaboard_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9e98ac706f4..bf13ea355ef 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <sound/wm8903.h>
+
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -62,6 +66,12 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "usbd", "clk_m", 12000000, true},
+ { "usb3", "clk_m", 12000000, true},
{ NULL, NULL, 0, 0},
};
@@ -117,6 +127,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.is_8bit = 1,
};
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+ .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+ .name = "tegra-snd-wm8903",
+ .id = 0,
+ .dev = {
+ .platform_data = &seaboard_audio_pdata,
+ },
+};
+
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
@@ -124,6 +150,10 @@ static struct platform_device *seaboard_devices[] __initdata = {
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@ static struct i2c_board_info __initdata adt7461_device = {
I2C_BOARD_INFO("adt7461", 0x4c),
};
+static struct wm8903_platform_data wm8903_pdata = {
+ .irq_active_low = 0,
+ .micdet_cfg = 0,
+ .micdet_delay = 100,
+ .gpio_base = SEABOARD_GPIO_WM8903(0),
+ .gpio_cfg = {
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ 0,
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ },
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+ I2C_BOARD_INFO("wm8903", 0x1a),
+ .platform_data = &wm8903_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+ int gpio_status;
+
+ gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO FAILED\n");
+ WARN_ON(1);
+ }
+
+ gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+ WARN_ON(1);
+ }
+ gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+ platform_device_register(&tegra_ehci1_device);
+ platform_device_register(&tegra_ehci3_device);
+
+ return 0;
+}
+
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+ i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
@@ -161,6 +235,8 @@ static void __init seaboard_common_init(void)
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+ seaboard_ehci_init();
}
static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@ static void __init tegra_kaen_init(void)
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
+ seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+ tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
seaboard_common_init();
seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index d8415e1a843..4c45d4ca3c4 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -17,6 +17,11 @@
#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
#define _MACH_TEGRA_BOARD_SEABOARD_H
+#include <mach/gpio-tegra.h>
+
+#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
@@ -31,10 +36,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 47c596cdbf3..bcb1916e68b 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -13,12 +13,11 @@
* GNU General Public License for more details.
*
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/pinmux.h>
-#include <mach/gpio.h>
#include "gpio-names.h"
#include "board-trimslice.h"
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 8489aa8f515..990889443c1 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
@@ -46,7 +45,8 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index 7a7dee86b4d..50f128d8777 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -17,6 +17,8 @@
#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
#define _MACH_TEGRA_BOARD_TRIMSLICE_H
+#include <mach/gpio-tegra.h>
+
#define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */
#define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
new file mode 100644
index 00000000000..87d37fdf508
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_TEGRA_H
+#define __MACH_TEGRA_GPIO_TEGRA_H
+
+#include <linux/types.h>
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS INT_GPIO_NR
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+
+struct tegra_gpio_table {
+ int gpio; /* GPIO number */
+ bool enable; /* Enable for GPIO at init? */
+};
+
+void tegra_gpio_config(struct tegra_gpio_table *table, int num);
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
index 196f114dc24..e69de29bb2d 100644
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_H
-#define __MACH_TEGRA_GPIO_H
-
-#include <linux/init.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS INT_GPIO_NR
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE)
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
- if (gpio < TEGRA_NR_GPIOS)
- return INT_GPIO_BASE + gpio;
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
- return irq - INT_GPIO_BASE;
- return -EINVAL;
-}
-
-struct tegra_gpio_table {
- int gpio; /* GPIO number */
- bool enable; /* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 88081bb3ec5..37576a721ae 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -28,6 +28,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <mach/gpio-tegra.h>
#include <mach/usb_phy.h>
#include <mach/iomap.h>
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 32a7b0f7e9f..7b5c229dc7e 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -6,6 +6,7 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
+ select GPIO_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 376b6dfdfae..22c5ab79a74 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -38,6 +38,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "clock.h"
#include "mmc.h"
@@ -242,7 +243,7 @@ static struct resource gpio_resources[] = {
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
@@ -255,6 +256,7 @@ static struct resource gpio_resources[] = {
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
+#endif
#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
@@ -269,7 +271,6 @@ static struct resource gpio_resources[] = {
.flags = IORESOURCE_IRQ,
},
#endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
};
static struct resource keypad_resources[] = {
@@ -1559,11 +1560,35 @@ static struct platform_device i2c1_device = {
.resource = i2c1_resources,
};
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+ .variant = U300_GPIO_COH901335,
+ .ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ .variant = U300_GPIO_COH901571_3_BS335,
+ .ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ .variant = U300_GPIO_COH901571_3_BS365,
+ .ports = 5,
+#endif
+ .gpio_base = 0,
+ .gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
static struct platform_device gpio_device = {
.name = "u300-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(gpio_resources),
.resource = gpio_resources,
+ .dev = {
+ .platform_data = &u300_gpio_plat,
+ },
};
static struct platform_device keypad_device = {
@@ -1669,7 +1694,7 @@ void __init u300_init_irq(void)
BUG_ON(IS_ERR(clk));
clk_enable(clk);
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
new file mode 100644
index 00000000000..0c2b2021951
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
+
+/**
+ * enum u300_gpio_variant - the type of U300 GPIO employed
+ */
+enum u300_gpio_variant {
+ U300_GPIO_COH901335,
+ U300_GPIO_COH901571_3_BS335,
+ U300_GPIO_COH901571_3_BS365,
+};
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @variant: IP block variant
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ */
+struct u300_gpio_platform {
+ enum u300_gpio_variant variant;
+ u8 ports;
+ int gpio_base;
+ int gpio_irq_base;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index d5a71abcbae..e69de29bb2d 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -1,294 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index 09b1b28fa8f..d270fea3292 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -72,7 +72,7 @@
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
+#define U300_VIC_IRQS_END 45
#endif
/* The DB3350-specific interrupt lines */
@@ -88,7 +88,7 @@
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
+#define U300_VIC_IRQS_END 56
#endif
/* The DB3210-specific interrupt lines */
@@ -106,16 +106,25 @@
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
+#define U300_VIC_IRQS_END 48
#endif
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
+#else
+#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
+#endif
-#define NR_IRQS (IRQ_AB3550_END + 1)
+/* Optional AB3550 mixsig chip */
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
+#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
#else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
#endif
+#define NR_IRQS (IRQ_AB3550_END)
+
#endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 677ccef5cd3..d9a5c92db74 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -13,12 +13,12 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <linux/dmaengine.h>
#include <linux/amba/mmci.h>
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "mmc.h"
#include "padmux.h"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76f72b..15b23e4bd48 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,10 +6,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index 8ce46c0fdfd..feb5744d98b 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -4,7 +4,7 @@
* Board data for the U8500 UIB, also known as the New UIB
* License terms: GNU General Public License (GPL), version 2
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
@@ -13,7 +13,6 @@
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include "board-mop500.h"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2cc4876db21..f67b83dd901 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,6 +37,7 @@
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c5b16..63c3f8058ff 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -7,9 +7,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/db5500-regs.h>
#include <plat/ste_dma40.h>
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 166d47a5f4f..e014aa749b0 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -8,7 +8,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/i2c.h>
@@ -17,6 +16,7 @@
#include <plat/pincfg.h>
#include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 22705d246fc..9de1af00809 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -13,7 +13,7 @@
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06c8c5..13e8890a8b8 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -14,12 +14,12 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce046ae..c563e5418d8 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 3c4cd31ad9f..7389df911b1 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -7,6 +7,4 @@
*/
#define ARCH_NR_GPIOS 350
-#include <plat/gpio.h>
-
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
index 94ff27678a4..40a8c178f10 100644
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
index 94ff27678a4..40a8c178f10 100644
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
index 034da3e390c..5385a420327 100644
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -15,16 +15,12 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
+#define gpio_to_irq gpio_to_irq
static inline int irq_to_gpio(unsigned irq)
{
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 3b24bfa3b82..07c4bc8ea0a 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range)
dcache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
add r12, r12, r2
@@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area)
add r1, r0, r1
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
add r0, r0, r2
@@ -247,6 +255,10 @@ v7_dma_inv_range:
sub r3, r2, #1
tst r0, r3
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
tst r1, r3
@@ -270,6 +282,10 @@ v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c10, 1 @ clean D / U line
add r0, r0, r2
@@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range)
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+ ALT_SMP(W(dsb))
+ ALT_UP(W(nop))
+#endif
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line
add r0, r0, r2
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 50be842e89f..01f5987eb1a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -347,6 +347,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
if (addr)
*handle = pfn_to_dma(dev, page_to_pfn(page));
+ else
+ __dma_free_buffer(page, size);
return addr;
}
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 31c820c1b79..3e1ffc8b8f0 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -21,18 +21,12 @@
#include <linux/spinlock.h>
#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
/* There's a off-by-one betweem the gpio bank number and the gpiochip */
/* range e.g. GPIO_1_5 is gpio 5 under linux */
#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-/* use gpiolib dispatchers */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
index d5d7e651269..3ba4d8f8073 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
@@ -9,20 +9,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
/*
* "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
@@ -93,4 +82,4 @@ struct nmk_gpio_platform_data {
bool supports_sleepmode;
};
-#endif /* __ASM_PLAT_GPIO_H */
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 923c9621096..caa1f7b6cc2 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -18,7 +18,6 @@
#include <mach/hardware.h>
#include <plat/board.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b102260..61a1ec2a6af 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
@@ -19,7 +19,6 @@
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98d5d6..64c3bd4aa54 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -8,7 +8,7 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,7 +24,6 @@
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
#include <plat/menelaus.h>
#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 91e8de3db08..9e86ee0aed0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -222,26 +222,6 @@ extern void omap_gpio_restore_context(void);
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int gpio_get_value(unsigned gpio)
-{
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- __gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return __gpio_to_irq(gpio);
-}
-
static inline int irq_to_gpio(unsigned irq)
{
int tmp;
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 3075b9fdde8..3abf30428be 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -12,15 +12,7 @@
#define __PLAT_GPIO_H
#include <linux/init.h>
-#include <asm-generic/gpio.h>
-
-/*
- * GENERIC_GPIO primitives.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
+#include <linux/types.h>
/*
* Orion-specific GPIO API extensions.
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 3aca5ba0f87..f302d048392 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
obj-y := dma.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
new file mode 100644
index 00000000000..b6390beff32
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -0,0 +1,44 @@
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
index 1ddd2b97a72..258f77210b0 100644
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -1,35 +1,10 @@
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
-struct irq_data;
+#define __ARM_GPIOLIB_COMPLEX
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
+/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
+#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
@@ -52,13 +27,4 @@ static inline void gpio_set_value(unsigned gpio, int value)
#define gpio_cansleep __gpio_cansleep
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6fac7..3c6335307fb 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd)
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode = 0x0;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
- idcode = s3c24xx_read_idcode_v5();
+ samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
- idcode = s3c24xx_read_idcode_v4();
+ samsung_cpu_id = s3c24xx_read_idcode_v4();
}
+ s3c24xx_init_cpu();
arm_pm_restart = s3c24xx_pm_restart;
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7449c..7b0a28f73a6 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@ static const char name_s5p6450[] = "S5P6450";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x56440100,
- .idmask = 0xfffff000,
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
- .idcode = 0x36450000,
- .idmask = 0xfffff000,
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
}, {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
- .idcode = 0x43110000,
- .idmask = 0xfffff000,
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
.init_clocks = s5pv210_init_clocks,
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
}, {
- .idcode = 0x43210000,
- .idmask = 0xfffe0000,
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4412,
},
};
@@ -114,13 +132,13 @@ static struct map_desc s5p_iodesc[] __initdata = {
void __init s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr)
{
- unsigned long idcode;
-
/* initialize the io descriptors we need for initialization */
iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
- idcode = __raw_readl(cpuid_addr);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ /* detect cpu id and rev. */
+ s5p_init_cpu(cpuid_addr);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab53dc..f680a143e38 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
extern void exynos4_setup_clocks(void);
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
extern int exynos4_init(void);
extern void exynos4_init_irq(void);
extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fadee7a..1bfd61a4c8d 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
* published by the Free Software Foundation.
*/
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
#define PLL45XX_MDIV_MASK (0x3FF)
#define PLL45XX_PDIV_MASK (0x3F)
#define PLL45XX_SDIV_MASK (0x7)
@@ -19,8 +72,6 @@
#define PLL45XX_PDIV_SHIFT (8)
#define PLL45XX_SDIV_SHIFT (0)
-#include <asm/div64.h>
-
enum pll45xx_type_t {
pll_4500,
pll_4502,
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078ef6bb..f88216d2399 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
{
static int used_gpioint_groups = 0;
int group = chip->group;
- struct s5p_gpioint_bank *bank = NULL;
+ struct s5p_gpioint_bank *b, *bank = NULL;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
return -ENOMEM;
- list_for_each_entry(bank, &banks, list) {
- if (group >= bank->start &&
- group < bank->start + bank->nr_groups)
+ list_for_each_entry(b, &banks, list) {
+ if (group >= b->start && group < b->start + b->nr_groups) {
+ bank = b;
break;
+ }
}
if (!bank)
return -EINVAL;
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc..3de756da5ea 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@ obj- :=
# Objects we always build independent of SoC choice
-obj-y += init.o
+obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 302c42670bd..3b4451979d1 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -64,6 +64,17 @@ static LIST_HEAD(clocks);
*/
DEFINE_SPINLOCK(clocks_lock);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+ s3c2410_wdtclk = clk_get(NULL, "watchdog");
+ if (IS_ERR(s3c2410_wdtclk))
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 00000000000..81c06d44c11
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+ return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+ /* nothing here yet */
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!samsung_cpu_id) {
+ /*
+ * S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read.
+ */
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+ samsung_cpu_id = __raw_readl(cpuid_addr);
+ samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 87d5b38a86f..73c66d4d10f 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -9,6 +9,9 @@
* published by the Free Software Foundation.
*/
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
#include <linux/spinlock.h>
#include <linux/clkdev.h>
@@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
extern void s3c_pwmclk_init(void);
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741b23e..54f370f0fc0 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
#ifndef __SAMSUNG_PLAT_CPU_H
#define __SAMSUNG_PLAT_CPU_H
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID 0x32400000
+#define S3C24XX_CPU_MASK 0xFFF00000
+
+#define S3C6400_CPU_ID 0x36400000
+#define S3C6410_CPU_ID 0x36410000
+#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK 0xFFFFF000
+
+#define S5P6440_CPU_ID 0x56440000
+#define S5P6450_CPU_ID 0x36450000
+#define S5P64XX_CPU_MASK 0xFFFFF000
+
+#define S5PC100_CPU_ID 0x43100000
+#define S5PC100_CPU_MASK 0xFFFFF000
+
+#define S5PV210_CPU_ID 0x43110000
+#define S5PV210_CPU_MASK 0xFFFFF000
+
+#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
+#define EXYNOS4412_CPU_ID 0xE4412200
+#define EXYNOS4_CPU_MASK 0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+ defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx() is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx() is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440() is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450() is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100() is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210() is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210() 0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210() is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412() is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412() 0
+#endif
+
+#define EXYNOS4210_REV_0 (0x0)
+#define EXYNOS4210_REV_1_0 (0x10)
+#define EXYNOS4210_REV_1_1 (0x11)
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
@@ -55,6 +160,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 54b762acb5a..40dbb2b0ae2 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <plat/clock.h>
#include <plat/regs-watchdog.h>
#include <mach/map.h>
@@ -19,17 +20,12 @@
static inline void arch_wdt_reset(void)
{
- struct clk *wdtclk;
-
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+ if (s3c2410_wdtclk)
+ clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
index b857c91257d..40a8c178f10 100644
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -1,24 +1 @@
-/*
- * arch/arm/plat-spear/include/plat/gpio.h
- *
- * GPIO macros for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-#endif /* __PLAT_GPIO_H */
+/* empty */
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 5cc83851ad0..31a7d3a7ce2 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -561,6 +561,20 @@ static struct pci_ops u4_pcie_pci_ops =
.write = u4_pcie_write_config,
};
+static void __devinit pmac_pci_fixup_u4_of_node(struct pci_dev *dev)
+{
+ /* Apple's device-tree "hides" the root complex virtual P2P bridge
+ * on U4. However, Linux sees it, causing the PCI <-> OF matching
+ * code to fail to properly match devices below it. This works around
+ * it by setting the node of the bridge to point to the PHB node,
+ * which is not entirely correct but fixes the matching code and
+ * doesn't break anything else. It's also the simplest possible fix.
+ */
+ if (dev->dev.of_node == NULL)
+ dev->dev.of_node = pcibios_get_phb_of_node(dev->bus);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node);
+
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 64b61bf72e9..547f1a6a35d 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -188,7 +188,8 @@ extern char elf_platform[];
#define SET_PERSONALITY(ex) \
do { \
if (personality(current->personality) != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ set_personality(PER_LINUX | \
+ (current->personality & ~PER_MASK)); \
if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
set_thread_flag(TIF_31BIT); \
else \
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 519eb5f187e..c0cb794bb36 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
* struct gmap_struct - guest address space
* @mm: pointer to the parent mm_struct
* @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
* @crst_list: list of all crst tables used in the guest address space
*/
struct gmap {
struct list_head list;
struct mm_struct *mm;
unsigned long *table;
+ unsigned long asce;
struct list_head crst_list;
};
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 532fd432215..2b45591e158 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -10,6 +10,7 @@
#include <linux/sched.h>
#include <asm/vdso.h>
#include <asm/sigp.h>
+#include <asm/pgtable.h>
/*
* Make sure that the compiler is new enough. We want a compiler that
@@ -126,6 +127,7 @@ int main(void)
DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+ DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
@@ -151,6 +153,7 @@ int main(void)
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+ DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
#endif /* CONFIG_32BIT */
return 0;
}
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 5f729d627ce..713da076053 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -1076,6 +1076,11 @@ sie_loop:
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
tm __TI_flags+7(%r14),_TIF_EXIT_SIE
jnz sie_exit
+ lg %r14,__LC_GMAP # get gmap pointer
+ ltgr %r14,%r14
+ jz sie_gmap
+ lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
+sie_gmap:
lg %r14,__SF_EMPTY(%r15) # get control block pointer
SPP __SF_EMPTY(%r15) # set guest id
sie 0(%r14)
@@ -1083,6 +1088,7 @@ sie_done:
SPP __LC_CMF_HPP # set host id
lg %r14,__LC_THREAD_INFO # pointer thread_info struct
sie_exit:
+ lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
ni __TI_flags+6(%r14),255-(_TIF_SIE>>8)
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f17296e4fc8..dc2b580e27b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext)
switch (ext) {
case KVM_CAP_S390_PSW:
+ case KVM_CAP_S390_GMAP:
r = 1;
break;
default:
@@ -263,10 +264,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
restore_fp_regs(&vcpu->arch.guest_fpregs);
restore_access_regs(vcpu->arch.guest_acrs);
+ gmap_enable(vcpu->arch.gmap);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ gmap_disable(vcpu->arch.gmap);
save_fp_regs(&vcpu->arch.guest_fpregs);
save_access_regs(vcpu->arch.guest_acrs);
restore_fp_regs(&vcpu->arch.host_fpregs);
@@ -461,7 +464,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
- gmap_enable(vcpu->arch.gmap);
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
@@ -470,7 +472,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
}
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
- gmap_disable(vcpu->arch.gmap);
local_irq_disable();
kvm_guest_exit();
local_irq_enable();
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 4d1f2bce87b..5d56c2b95b1 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm)
table = (unsigned long *) page_to_phys(page);
crst_table_init(table, _REGION1_ENTRY_EMPTY);
gmap->table = table;
+ gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | __pa(table);
list_add(&gmap->list, &mm->context.gmap_list);
return gmap;
@@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free);
*/
void gmap_enable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS | __pa(gmap->table);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = (unsigned long) gmap;
}
EXPORT_SYMBOL_GPL(gmap_enable);
@@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable);
*/
void gmap_disable(struct gmap *gmap)
{
- /* Load primary space page table origin. */
- S390_lowcore.user_asce =
- gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
- asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
S390_lowcore.gmap = 0UL;
}
EXPORT_SYMBOL_GPL(gmap_disable);
@@ -309,15 +303,15 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
/* Walk the guest addr space page table */
table = gmap->table + (((to + off) >> 53) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 42) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 31) & 0x7ff);
if (*table & _REGION_ENTRY_INV)
- return 0;
+ goto out;
table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
table = table + (((to + off) >> 20) & 0x7ff);
@@ -325,6 +319,7 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
flush |= gmap_unlink_segment(gmap, table);
*table = _SEGMENT_ENTRY_INV;
}
+out:
up_read(&gmap->mm->mmap_sem);
if (flush)
gmap_flush_tlb(gmap);
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
index 55a17c6efeb..d06a2660175 100644
--- a/arch/sparc/include/asm/spitfire.h
+++ b/arch/sparc/include/asm/spitfire.h
@@ -43,6 +43,8 @@
#define SUN4V_CHIP_NIAGARA1 0x01
#define SUN4V_CHIP_NIAGARA2 0x02
#define SUN4V_CHIP_NIAGARA3 0x03
+#define SUN4V_CHIP_NIAGARA4 0x04
+#define SUN4V_CHIP_NIAGARA5 0x05
#define SUN4V_CHIP_UNKNOWN 0xff
#ifndef __ASSEMBLY__
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
index 9ed6ff679ab..ee8edc68423 100644
--- a/arch/sparc/include/asm/xor_64.h
+++ b/arch/sparc/include/asm/xor_64.h
@@ -66,6 +66,8 @@ static struct xor_block_template xor_block_niagara = {
((tlb_type == hypervisor && \
(sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || \
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)) ? \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || \
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)) ? \
&xor_block_niagara : \
&xor_block_VIS)
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 9810fd88105..ba9b1cec4e6 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -481,6 +481,18 @@ static void __init sun4v_cpu_probe(void)
sparc_pmu_type = "niagara3";
break;
+ case SUN4V_CHIP_NIAGARA4:
+ sparc_cpu_type = "UltraSparc T4 (Niagara4)";
+ sparc_fpu_type = "UltraSparc T4 integrated FPU";
+ sparc_pmu_type = "niagara4";
+ break;
+
+ case SUN4V_CHIP_NIAGARA5:
+ sparc_cpu_type = "UltraSparc T5 (Niagara5)";
+ sparc_fpu_type = "UltraSparc T5 integrated FPU";
+ sparc_pmu_type = "niagara5";
+ break;
+
default:
printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
prom_cpu_compatible);
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index 4197e8d62d4..9323eafccb9 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -325,6 +325,8 @@ static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index)
case SUN4V_CHIP_NIAGARA1:
case SUN4V_CHIP_NIAGARA2:
case SUN4V_CHIP_NIAGARA3:
+ case SUN4V_CHIP_NIAGARA4:
+ case SUN4V_CHIP_NIAGARA5:
rover_inc_table = niagara_iterate_method;
break;
default:
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 0eac1b2fc53..0d810c2f1d0 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -133,7 +133,7 @@ prom_sun4v_name:
prom_niagara_prefix:
.asciz "SUNW,UltraSPARC-T"
prom_sparc_prefix:
- .asciz "SPARC-T"
+ .asciz "SPARC-"
.align 4
prom_root_compatible:
.skip 64
@@ -396,7 +396,7 @@ sun4v_chip_type:
or %g1, %lo(prom_cpu_compatible), %g1
sethi %hi(prom_sparc_prefix), %g7
or %g7, %lo(prom_sparc_prefix), %g7
- mov 7, %g3
+ mov 6, %g3
90: ldub [%g7], %g2
ldub [%g1], %g4
cmp %g2, %g4
@@ -408,10 +408,23 @@ sun4v_chip_type:
sethi %hi(prom_cpu_compatible), %g1
or %g1, %lo(prom_cpu_compatible), %g1
- ldub [%g1 + 7], %g2
+ ldub [%g1 + 6], %g2
+ cmp %g2, 'T'
+ be,pt %xcc, 70f
+ cmp %g2, 'M'
+ bne,pn %xcc, 4f
+ nop
+
+70: ldub [%g1 + 7], %g2
cmp %g2, '3'
be,pt %xcc, 5f
mov SUN4V_CHIP_NIAGARA3, %g4
+ cmp %g2, '4'
+ be,pt %xcc, 5f
+ mov SUN4V_CHIP_NIAGARA4, %g4
+ cmp %g2, '5'
+ be,pt %xcc, 5f
+ mov SUN4V_CHIP_NIAGARA5, %g4
ba,pt %xcc, 4f
nop
@@ -545,6 +558,12 @@ niagara_tlb_fixup:
cmp %g1, SUN4V_CHIP_NIAGARA3
be,pt %xcc, niagara2_patch
nop
+ cmp %g1, SUN4V_CHIP_NIAGARA4
+ be,pt %xcc, niagara2_patch
+ nop
+ cmp %g1, SUN4V_CHIP_NIAGARA5
+ be,pt %xcc, niagara2_patch
+ nop
call generic_patch_copyops
nop
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index c8cc461ff75..f793742eec2 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -380,8 +380,7 @@ void flush_thread(void)
#endif
}
- /* Now, this task is no longer a kernel thread. */
- current->thread.current_ds = USER_DS;
+ /* This task is no longer a kernel thread. */
if (current->thread.flags & SPARC_FLAG_KTHREAD) {
current->thread.flags &= ~SPARC_FLAG_KTHREAD;
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index c158a95ec66..d959cd0a4aa 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -368,9 +368,6 @@ void flush_thread(void)
/* Clear FPU register state. */
t->fpsaved[0] = 0;
-
- if (get_thread_current_ds() != ASI_AIUS)
- set_fs(USER_DS);
}
/* It's a bit more tricky when 64-bit tasks are involved... */
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index d26e1f6c717..3e3e2914c70 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -137,7 +137,7 @@ static void __init process_switch(char c)
prom_halt();
break;
case 'p':
- /* Just ignore, this behavior is now the default. */
+ prom_early_console.flags &= ~CON_BOOT;
break;
default:
printk("Unknown boot switch (-%c)\n", c);
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 3c5bb784214..c965595aa7e 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -106,7 +106,7 @@ static void __init process_switch(char c)
prom_halt();
break;
case 'p':
- /* Just ignore, this behavior is now the default. */
+ prom_early_console.flags &= ~CON_BOOT;
break;
case 'P':
/* Force UltraSPARC-III P-Cache on. */
@@ -425,10 +425,14 @@ static void __init init_sparc64_elf_hwcap(void)
else if (tlb_type == hypervisor) {
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= HWCAP_SPARC_BLKINIT;
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= HWCAP_SPARC_N2;
}
@@ -452,11 +456,15 @@ static void __init init_sparc64_elf_hwcap(void)
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1)
cap |= AV_SPARC_ASI_BLK_INIT;
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
- sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
AV_SPARC_ASI_BLK_INIT |
AV_SPARC_POPC);
- if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+ if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+ sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
AV_SPARC_FMAF);
}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 581531dbc8b..8e073d80213 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -511,6 +511,11 @@ static void __init read_obp_translations(void)
for (i = 0; i < prom_trans_ents; i++)
prom_trans[i].data &= ~0x0003fe0000000000UL;
}
+
+ /* Force execute bit on. */
+ for (i = 0; i < prom_trans_ents; i++)
+ prom_trans[i].data |= (tlb_type == hypervisor ?
+ _PAGE_EXEC_4V : _PAGE_EXEC_4U);
}
static void __init hypervisor_tlb_lock(unsigned long vaddr,
diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
index d31ecf346b4..21bebe63df6 100644
--- a/arch/um/Kconfig.x86
+++ b/arch/um/Kconfig.x86
@@ -10,6 +10,10 @@ config CMPXCHG_LOCAL
bool
default n
+config CMPXCHG_DOUBLE
+ bool
+ default n
+
source "arch/x86/Kconfig.cpu"
endmenu
diff --git a/arch/um/Makefile b/arch/um/Makefile
index fab8121d2b3..c0f712cc7c5 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
-Din6addr_loopback=kernel_in6addr_loopback \
- -Din6addr_any=kernel_in6addr_any
+ -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
KBUILD_AFLAGS += $(ARCH_INCLUDE)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d51c404239a..364c8a15c4c 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
* is done under a spinlock. Checking whether the device is in use is
* line->tty->count > 1, also under the spinlock.
*
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host. If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host. If it's equal to 0, then we are doing the
* first open or last close. Otherwise, open and close just return.
*/
@@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty)
goto out_unlock;
err = 0;
- if (tty->count > 1)
+ if (line->count++)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
+ BUG_ON(tty->driver_data);
tty->driver_data = line;
line->tty = tty;
+ spin_unlock(&line->count_lock);
err = enable_chan(line);
- if (err)
+ if (err) /* line_close() will be called by our caller */
return err;
INIT_DELAYED_WORK(&line->task, line_timer_cb);
@@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty)
chan_window_size(&line->chan_list, &tty->winsize.ws_row,
&tty->winsize.ws_col);
- return err;
+ return 0;
out_unlock:
spin_unlock(&line->count_lock);
@@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp)
flush_buffer(line);
spin_lock(&line->count_lock);
- if (!line->valid)
- goto out_unlock;
+ BUG_ON(!line->valid);
- if (tty->count > 1)
+ if (--line->count)
goto out_unlock;
- spin_unlock(&line->count_lock);
-
line->tty = NULL;
tty->driver_data = NULL;
+ spin_unlock(&line->count_lock);
+
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
@@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio,
spin_lock(&line->count_lock);
- if (line->tty != NULL) {
+ if (line->count) {
*error_out = "Device is already open";
goto out;
}
@@ -722,41 +721,53 @@ struct winch {
int pid;
struct tty_struct *tty;
unsigned long stack;
+ struct work_struct work;
};
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
{
- if (free_irq_ok)
- free_irq(WINCH_IRQ, winch);
-
- list_del(&winch->list);
+ struct winch *winch = container_of(work, struct winch, work);
+ free_irq(WINCH_IRQ, winch);
if (winch->pid != -1)
os_kill_process(winch->pid, 1);
- if (winch->fd != -1)
- os_close_file(winch->fd);
if (winch->stack != 0)
free_stack(winch->stack, 0);
kfree(winch);
}
+static void free_winch(struct winch *winch)
+{
+ int fd = winch->fd;
+ winch->fd = -1;
+ if (fd != -1)
+ os_close_file(fd);
+ list_del(&winch->list);
+ __free_winch(&winch->work);
+}
+
static irqreturn_t winch_interrupt(int irq, void *data)
{
struct winch *winch = data;
struct tty_struct *tty;
struct line *line;
+ int fd = winch->fd;
int err;
char c;
- if (winch->fd != -1) {
- err = generic_read(winch->fd, &c, NULL);
+ if (fd != -1) {
+ err = generic_read(fd, &c, NULL);
if (err < 0) {
if (err != -EAGAIN) {
+ winch->fd = -1;
+ list_del(&winch->list);
+ os_close_file(fd);
printk(KERN_ERR "winch_interrupt : "
"read failed, errno = %d\n", -err);
printk(KERN_ERR "fd %d is losing SIGWINCH "
"support\n", winch->tty_fd);
- free_winch(winch, 0);
+ INIT_WORK(&winch->work, __free_winch);
+ schedule_work(&winch->work);
return IRQ_HANDLED;
}
goto out;
@@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty)
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
if (winch->tty == tty) {
- free_winch(winch, 1);
+ free_winch(winch);
break;
}
}
@@ -844,7 +855,7 @@ static void winch_cleanup(void)
list_for_each_safe(ele, next, &winch_handlers) {
winch = list_entry(ele, struct winch, list);
- free_winch(winch, 1);
+ free_winch(winch);
}
spin_unlock(&winch_handler_lock);
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8ac7146c237..2e1de572860 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d,
err = -errno;
printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
errno);
+ close(fd);
return err;
}
close(fd);
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index ae084ad1a3a..1a7d2757fe0 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *child);
extern int arch_copy_tls(struct task_struct *new);
extern void clear_flushed_tls(struct task_struct *task);
diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h
index 72f4f25af24..63df3ca02ac 100644
--- a/arch/um/include/shared/line.h
+++ b/arch/um/include/shared/line.h
@@ -33,6 +33,7 @@ struct line_driver {
struct line {
struct tty_struct *tty;
spinlock_t count_lock;
+ unsigned long count;
int valid;
char *init_str;
diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index b0b4589e0eb..f1e0aa56c52 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
extern int save_registers(int pid, struct uml_pt_regs *regs);
extern int restore_registers(int pid, struct uml_pt_regs *regs);
extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
extern int get_fp_registers(int pid, unsigned long *regs);
extern int put_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index fab4371184f..21c1ae7c3d7 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
arch_copy_thread(&current->thread.arch, &p->thread.arch);
}
else {
- get_safe_registers(p->thread.regs.regs.gp);
+ get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
p->thread.request.u.thread = current->thread.request.u.thread;
handler = new_thread_handler;
}
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 701b672c112..c9da32b0c70 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request,
void __user *vp = p;
switch (request) {
- /* read word at location addr. */
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
- ret = generic_ptrace_peekdata(child, addr, data);
- break;
-
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
ret = peek_user(child, addr, data);
break;
- /* write the word at location addr. */
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- ret = generic_ptrace_pokedata(child, addr, data);
- break;
-
/* write the word at location addr in the USER area */
case PTRACE_POKEUSR:
ret = poke_user(child, addr, data);
@@ -107,16 +95,6 @@ long arch_ptrace(struct task_struct *child, long request,
break;
}
#endif
-#ifdef PTRACE_GETFPREGS
- case PTRACE_GETFPREGS: /* Get the child FPU state. */
- ret = get_fpregs(vp, child);
- break;
-#endif
-#ifdef PTRACE_SETFPREGS
- case PTRACE_SETFPREGS: /* Set the child FPU state. */
- ret = set_fpregs(vp, child);
- break;
-#endif
case PTRACE_GET_THREAD_AREA:
ret = ptrace_get_thread_area(child, addr, vp);
break;
@@ -154,12 +132,6 @@ long arch_ptrace(struct task_struct *child, long request,
break;
}
#endif
-#ifdef PTRACE_ARCH_PRCTL
- case PTRACE_ARCH_PRCTL:
- /* XXX Calls ptrace on the host - needs some SMP thinking */
- ret = arch_prctl(child, data, (void __user *) addr);
- break;
-#endif
default:
ret = ptrace_request(child, request, addr, data);
if (ret == -EIO)
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 830fe6a1518..b866b9e3bef 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -8,6 +8,8 @@
#include <string.h>
#include <sys/ptrace.h>
#include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
int save_registers(int pid, struct uml_pt_regs *regs)
{
@@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
/* This is set once at boot time and not changed thereafter */
static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
int init_registers(int pid)
{
@@ -42,10 +45,14 @@ int init_registers(int pid)
return -errno;
arch_init_registers(pid);
+ get_fp_registers(pid, exec_fp_regs);
return 0;
}
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
{
memcpy(regs, exec_regs, sizeof(exec_regs));
+
+ if (fp_regs)
+ memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
}
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index d261f170d12..e771398be5f 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR];
static int __init init_syscall_regs(void)
{
- get_safe_registers(syscall_regs);
+ get_safe_registers(syscall_regs, NULL);
syscall_regs[REGS_IP_INDEX] = STUB_CODE +
((unsigned long) &batch_syscall_stub -
(unsigned long) &__syscall_stub_start);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d6e0a2234b8..dee0e8cf8ad 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs)
if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
fatal_sigsegv();
+ if (put_fp_registers(pid, regs->fp))
+ fatal_sigsegv();
+
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
@@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs)
fatal_sigsegv();
}
+ if (get_fp_registers(pid, regs->fp)) {
+ printk(UM_KERN_ERR "userspace - get_fp_registers failed, "
+ "errno = %d\n", errno);
+ fatal_sigsegv();
+ }
+
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if (WIFSTOPPED(status)) {
@@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs)
}
static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
static int __init init_thread_regs(void)
{
- get_safe_registers(thread_regs);
+ get_safe_registers(thread_regs, thread_fp_regs);
/* Set parent's instruction pointer to start of clone-stub */
thread_regs[REGS_IP_INDEX] = STUB_CODE +
(unsigned long) stub_clone_handler -
@@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid)
return err;
}
+ err = put_fp_registers(pid, thread_fp_regs);
+ if (err < 0) {
+ printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+ "failed, pid = %d, err = %d\n", pid, err);
+ return err;
+ }
+
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h
index 0273e4d09af..5d2a5911253 100644
--- a/arch/um/sys-i386/asm/ptrace.h
+++ b/arch/um/sys-i386/asm/ptrace.h
@@ -42,11 +42,6 @@
*/
struct user_desc;
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *tsk);
-
extern int ptrace_get_thread_area(struct task_struct *child, int idx,
struct user_desc __user *user_desc);
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index d23b2d3ea38..3375c271785 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data)
return put_user(tmp, (unsigned long __user *) data);
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
@@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_i387_struct fpregs;
@@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
(unsigned long *) &fpregs);
}
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
@@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
return n;
}
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
struct user_fxsr_struct fpregs;
@@ -206,5 +206,23 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
long subarch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
- return -EIO;
+ int ret = -EIO;
+ void __user *datap = (void __user *) data;
+ switch (request) {
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ ret = get_fpregs(datap, child);
+ break;
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ ret = set_fpregs(datap, child);
+ break;
+ case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ ret = get_fpxregs(datap, child);
+ break;
+ case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ ret = set_fpxregs(datap, child);
+ break;
+ default:
+ ret = -EIO;
+ }
+ return ret;
}
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
index d50e62e0707..c398a507611 100644
--- a/arch/um/sys-i386/shared/sysdep/ptrace.h
+++ b/arch/um/sys-i386/shared/sysdep/ptrace.h
@@ -53,6 +53,7 @@ extern int sysemu_supported;
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FPX_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index f43613643cd..4005506834f 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -145,7 +145,7 @@ int is_syscall(unsigned long addr)
return instr == 0x050f;
}
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
@@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
return n;
}
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
long fpregs[HOST_FP_SIZE];
@@ -182,12 +182,16 @@ long subarch_ptrace(struct task_struct *child, long request,
void __user *datap = (void __user *) data;
switch (request) {
- case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
ret = get_fpregs(datap, child);
break;
- case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
ret = set_fpregs(datap, child);
break;
+ case PTRACE_ARCH_PRCTL:
+ /* XXX Calls ptrace on the host - needs some SMP thinking */
+ ret = arch_prctl(child, data, (void __user *) addr);
+ break;
}
return ret;
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
index fdba5457947..8ee8f8e12af 100644
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
@@ -85,6 +85,7 @@
struct uml_pt_regs {
unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 4554cc6fb96..091508b533b 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -16,7 +16,6 @@
#endif
.macro altinstruction_entry orig alt feature orig_len alt_len
- .align 8
.long \orig - .
.long \alt - .
.word \feature
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 23fb6d79f20..37ad100a221 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -48,9 +48,6 @@ struct alt_instr {
u16 cpuid; /* cpuid bit set for replacement */
u8 instrlen; /* length of original instruction */
u8 replacementlen; /* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
- u32 pad2;
-#endif
};
extern void alternative_instructions(void);
@@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end)
\
"661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
" .long 661b - .\n" /* label */ \
" .long 663f - .\n" /* new instruction */ \
" .word " __stringify(feature) "\n" /* feature bit */ \
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4258aac99a6..88b23a43f34 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -332,7 +332,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
asm goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 0\n" /* no replacement */
" .word %P0\n" /* feature bit */
@@ -350,7 +349,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
asm volatile("1: movb $0,%0\n"
"2:\n"
".section .altinstructions,\"a\"\n"
- _ASM_ALIGN "\n"
" .long 1b - .\n"
" .long 3f - .\n"
" .word %P1\n" /* feature bit */
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 3f2ad2640d8..ccdbc16b894 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -42,8 +42,11 @@ int mach_set_rtc_mmss(unsigned long nowtime)
{
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
+ unsigned long flags;
int retval = 0;
+ spin_lock_irqsave(&rtc_lock, flags);
+
/* tell the clock it's being set */
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
@@ -93,12 +96,17 @@ int mach_set_rtc_mmss(unsigned long nowtime)
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
return retval;
}
unsigned long mach_get_cmos_time(void)
{
unsigned int status, year, mon, day, hour, min, sec, century = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
/*
* If UIP is clear, then we have >= 244 microseconds before
@@ -125,6 +133,8 @@ unsigned long mach_get_cmos_time(void)
status = CMOS_READ(RTC_CONTROL);
WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
sec = bcd2bin(sec);
min = bcd2bin(min);
@@ -169,24 +179,15 @@ EXPORT_SYMBOL(rtc_cmos_write);
int update_persistent_clock(struct timespec now)
{
- unsigned long flags;
- int retval;
-
- spin_lock_irqsave(&rtc_lock, flags);
- retval = x86_platform.set_wallclock(now.tv_sec);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return retval;
+ return x86_platform.set_wallclock(now.tv_sec);
}
/* not static: needed by APM */
void read_persistent_clock(struct timespec *ts)
{
- unsigned long retval, flags;
+ unsigned long retval;
- spin_lock_irqsave(&rtc_lock, flags);
retval = x86_platform.get_wallclock();
- spin_unlock_irqrestore(&rtc_lock, flags);
ts->tv_sec = retval;
ts->tv_nsec = 0;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 6f08bc940fa..8b4cc5f067d 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3603,7 +3603,7 @@ done_prefixes:
break;
case Src2CL:
ctxt->src2.bytes = 1;
- ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+ ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
break;
case Src2ImmByte:
rc = decode_imm(ctxt, &ctxt->src2, 1, true);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1c5b69373a0..8e8da7960db 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
/* xchg acts as a barrier before the setting of the high bits */
orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
- orig.spte_high = ssptep->spte_high = sspte.spte_high;
+ orig.spte_high = ssptep->spte_high;
+ ssptep->spte_high = sspte.spte_high;
count_spte_clear(sptep, spte);
return orig.spte;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 73d70d65e76..6d5dbcdd444 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -58,8 +58,11 @@ EXPORT_SYMBOL_GPL(vrtc_cmos_write);
unsigned long vrtc_get_time(void)
{
u8 sec, min, hour, mday, mon;
+ unsigned long flags;
u32 year;
+ spin_lock_irqsave(&rtc_lock, flags);
+
while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
cpu_relax();
@@ -70,6 +73,8 @@ unsigned long vrtc_get_time(void)
mon = vrtc_cmos_read(RTC_MONTH);
year = vrtc_cmos_read(RTC_YEAR);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
/* vRTC YEAR reg contains the offset to 1960 */
year += 1960;
@@ -83,8 +88,10 @@ unsigned long vrtc_get_time(void)
int vrtc_set_mmss(unsigned long nowtime)
{
int real_sec, real_min;
+ unsigned long flags;
int vrtc_min;
+ spin_lock_irqsave(&rtc_lock, flags);
vrtc_min = vrtc_cmos_read(RTC_MINUTES);
real_sec = nowtime % 60;
@@ -95,6 +102,8 @@ int vrtc_set_mmss(unsigned long nowtime)
vrtc_cmos_write(real_sec, RTC_SECONDS);
vrtc_cmos_write(real_min, RTC_MINUTES);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
return 0;
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 20a61427506..3dd53f997b1 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1721,10 +1721,8 @@ void __init xen_setup_machphys_mapping(void)
machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
}
#ifdef CONFIG_X86_32
- if ((machine_to_phys_mapping + machine_to_phys_nr)
- < machine_to_phys_mapping)
- machine_to_phys_nr = (unsigned long *)NULL
- - machine_to_phys_mapping;
+ WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+ < machine_to_phys_mapping);
#endif
}
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index c3b8d440873..46d6d21dbdb 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -306,10 +306,12 @@ char * __init xen_memory_setup(void)
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
extra_limit = xen_get_max_pages();
- if (extra_limit >= max_pfn)
- extra_pages = extra_limit - max_pfn;
- else
- extra_pages = 0;
+ if (max_pfn + extra_pages > extra_limit) {
+ if (extra_limit > max_pfn)
+ extra_pages = extra_limit - max_pfn;
+ else
+ extra_pages = 0;
+ }
extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d4fc6d454f8..041d4fe9dfe 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -532,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus)
WARN_ON(xen_smp_intr_init(0));
xen_init_lock_cpu(0);
- xen_init_spinlocks();
}
static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 5158c505bef..163b4679556 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void)
struct pvclock_vcpu_time_info *src;
cycle_t ret;
- src = &get_cpu_var(xen_vcpu)->time;
+ preempt_disable_notrace();
+ src = &__get_cpu_var(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
- put_cpu_var(xen_vcpu);
+ preempt_enable_notrace();
return ret;
}
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index bcaf16ee6ad..b596e54ddd7 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf,
{
char *s[4], *p, *major_s = NULL, *minor_s = NULL;
int ret;
- unsigned long major, minor, temp;
+ unsigned long major, minor;
int i = 0;
dev_t dev;
- u64 bps, iops;
+ u64 temp;
memset(s, 0, sizeof(s));
@@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf,
dev = MKDEV(major, minor);
- ret = blkio_check_dev_num(dev);
+ ret = strict_strtoull(s[1], 10, &temp);
if (ret)
- return ret;
+ return -EINVAL;
- newpn->dev = dev;
+ /* For rule removal, do not check for device presence. */
+ if (temp) {
+ ret = blkio_check_dev_num(dev);
+ if (ret)
+ return ret;
+ }
- if (s[1] == NULL)
- return -EINVAL;
+ newpn->dev = dev;
switch (plid) {
case BLKIO_POLICY_PROP:
- ret = strict_strtoul(s[1], 10, &temp);
- if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) ||
- temp > BLKIO_WEIGHT_MAX)
+ if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
+ temp > BLKIO_WEIGHT_MAX)
return -EINVAL;
newpn->plid = plid;
@@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf,
switch(fileid) {
case BLKIO_THROTL_read_bps_device:
case BLKIO_THROTL_write_bps_device:
- ret = strict_strtoull(s[1], 10, &bps);
- if (ret)
- return -EINVAL;
-
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.bps = bps;
+ newpn->val.bps = temp;
break;
case BLKIO_THROTL_read_iops_device:
case BLKIO_THROTL_write_iops_device:
- ret = strict_strtoull(s[1], 10, &iops);
- if (ret)
- return -EINVAL;
-
- if (iops > THROTL_IOPS_MAX)
+ if (temp > THROTL_IOPS_MAX)
return -EINVAL;
newpn->plid = plid;
newpn->fileid = fileid;
- newpn->val.iops = (unsigned int)iops;
+ newpn->val.iops = (unsigned int)temp;
break;
}
break;
diff --git a/block/blk-core.c b/block/blk-core.c
index 90e1ffdeb41..d34433ae791 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -348,9 +348,10 @@ void blk_put_queue(struct request_queue *q)
EXPORT_SYMBOL(blk_put_queue);
/*
- * Note: If a driver supplied the queue lock, it should not zap that lock
- * unexpectedly as some queue cleanup components like elevator_exit() and
- * blk_throtl_exit() need queue lock.
+ * Note: If a driver supplied the queue lock, it is disconnected
+ * by this function. The actual state of the lock doesn't matter
+ * here as the request_queue isn't accessible after this point
+ * (QUEUE_FLAG_DEAD is set) and no other requests will be queued.
*/
void blk_cleanup_queue(struct request_queue *q)
{
@@ -367,10 +368,8 @@ void blk_cleanup_queue(struct request_queue *q)
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
mutex_unlock(&q->sysfs_lock);
- if (q->elevator)
- elevator_exit(q->elevator);
-
- blk_throtl_exit(q);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
blk_put_queue(q);
}
@@ -1167,7 +1166,7 @@ static bool bio_attempt_front_merge(struct request_queue *q,
* true if merge was successful, otherwise false.
*/
static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
- struct bio *bio)
+ struct bio *bio, unsigned int *request_count)
{
struct blk_plug *plug;
struct request *rq;
@@ -1176,10 +1175,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
plug = tsk->plug;
if (!plug)
goto out;
+ *request_count = 0;
list_for_each_entry_reverse(rq, &plug->list, queuelist) {
int el_ret;
+ (*request_count)++;
+
if (rq->q != q)
continue;
@@ -1219,6 +1221,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
struct blk_plug *plug;
int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
struct request *req;
+ unsigned int request_count = 0;
/*
* low level driver can indicate that it wants pages above a
@@ -1237,7 +1240,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
- if (attempt_plug_merge(current, q, bio))
+ if (attempt_plug_merge(current, q, bio, &request_count))
goto out;
spin_lock_irq(q->queue_lock);
@@ -1302,11 +1305,10 @@ get_rq:
if (__rq->q != q)
plug->should_sort = 1;
}
+ if (request_count >= BLK_MAX_REQUEST_COUNT)
+ blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
- plug->count++;
drive_stat_acct(req, 1);
- if (plug->count >= BLK_MAX_REQUEST_COUNT)
- blk_flush_plug_list(plug, false);
} else {
spin_lock_irq(q->queue_lock);
add_acct_request(q, req, where);
@@ -2634,7 +2636,6 @@ void blk_start_plug(struct blk_plug *plug)
INIT_LIST_HEAD(&plug->list);
INIT_LIST_HEAD(&plug->cb_list);
plug->should_sort = 0;
- plug->count = 0;
/*
* If this is a nested plug, don't actually assign it. It will be
@@ -2718,7 +2719,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
return;
list_splice_init(&plug->list, &list);
- plug->count = 0;
if (plug->should_sort) {
list_sort(NULL, &list, plug_rq_cmp);
diff --git a/block/blk-softirq.c b/block/blk-softirq.c
index 58340d0cb23..1366a89d8e6 100644
--- a/block/blk-softirq.c
+++ b/block/blk-softirq.c
@@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req)
/*
* Select completion CPU
*/
- if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) {
+ if (req->cpu != -1) {
ccpu = req->cpu;
if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) {
ccpu = blk_cpu_to_group(ccpu);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 0ee17b5e7fb..60fda88c57f 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
ret = queue_var_store(&val, page, count);
spin_lock_irq(q->queue_lock);
- if (val) {
+ if (val == 2) {
queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
- if (val == 2)
- queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
- } else {
+ queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 1) {
+ queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
+ queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
+ } else if (val == 0) {
queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
}
@@ -477,6 +479,11 @@ static void blk_release_queue(struct kobject *kobj)
blk_sync_queue(q);
+ if (q->elevator)
+ elevator_exit(q->elevator);
+
+ blk_throtl_exit(q);
+
if (rl->rq_pool)
mempool_destroy(rl->rq_pool);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a33bd4377c6..16ace89613b 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -130,8 +130,8 @@ struct cfq_queue {
unsigned long slice_end;
long slice_resid;
- /* pending metadata requests */
- int meta_pending;
+ /* pending priority requests */
+ int prio_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
@@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2,
if (rq_is_sync(rq1) != rq_is_sync(rq2))
return rq_is_sync(rq1) ? rq1 : rq2;
- if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META)
- return rq1->cmd_flags & REQ_META ? rq1 : rq2;
+ if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO)
+ return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2;
s1 = blk_rq_pos(rq1);
s2 = blk_rq_pos(rq2);
@@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq)
cfqq->cfqd->rq_queued--;
cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(rq), rq_is_sync(rq));
- if (rq->cmd_flags & REQ_META) {
- WARN_ON(!cfqq->meta_pending);
- cfqq->meta_pending--;
+ if (rq->cmd_flags & REQ_PRIO) {
+ WARN_ON(!cfqq->prio_pending);
+ cfqq->prio_pending--;
}
}
@@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
- if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
+ if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending)
return true;
/*
@@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_io_context *cic = RQ_CIC(rq);
cfqd->rq_queued++;
- if (rq->cmd_flags & REQ_META)
- cfqq->meta_pending++;
+ if (rq->cmd_flags & REQ_PRIO)
+ cfqq->prio_pending++;
cfq_update_io_thinktime(cfqd, cfqq, cic);
cfq_update_io_seektime(cfqd, cfqq, rq);
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index bc533dde16c..f895a244ca7 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -121,7 +121,7 @@
/* Maximum sleep allowed via Sleep() operator */
-#define ACPI_MAX_SLEEP 20000 /* Two seconds */
+#define ACPI_MAX_SLEEP 2000 /* Two seconds */
/******************************************************************************
*
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index c34aa51af4e..e3f47872ec2 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -13,6 +13,7 @@ config ACPI_APEI_GHES
bool "APEI Generic Hardware Error Source"
depends on ACPI_APEI && X86
select ACPI_HED
+ select IRQ_WORK
select LLIST
select GENERIC_ALLOCATOR
help
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 8041248fce9..61540360d5c 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -618,7 +618,7 @@ int apei_osc_setup(void)
};
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- capbuf[OSC_SUPPORT_TYPE] = 0;
+ capbuf[OSC_SUPPORT_TYPE] = 1;
capbuf[OSC_CONTROL_TYPE] = 0;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c7257139..3f4c2613b3d 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
#define DRV_VERSION "0.3"
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 2c18d584066..b97294e2d95 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -42,6 +42,22 @@ static struct pm_clk_data *__to_pcd(struct device *dev)
}
/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
+/**
* pm_clk_add - Start using a device clock for power management.
* @dev: Device whose clock is going to be used for power management.
* @con_id: Connection ID of the clock.
@@ -73,6 +89,8 @@ int pm_clk_add(struct device *dev, const char *con_id)
}
}
+ pm_clk_acquire(dev, ce);
+
spin_lock_irq(&pcd->lock);
list_add_tail(&ce->node, &pcd->clock_list);
spin_unlock_irq(&pcd->lock);
@@ -82,17 +100,12 @@ int pm_clk_add(struct device *dev, const char *con_id)
/**
* __pm_clk_remove - Destroy PM clock entry.
* @ce: PM clock entry to destroy.
- *
- * This routine must be called under the spinlock protecting the PM list of
- * clocks corresponding the the @ce's device.
*/
static void __pm_clk_remove(struct pm_clock_entry *ce)
{
if (!ce)
return;
- list_del(&ce->node);
-
if (ce->status < PCE_STATUS_ERROR) {
if (ce->status == PCE_STATUS_ENABLED)
clk_disable(ce->clk);
@@ -126,18 +139,22 @@ void pm_clk_remove(struct device *dev, const char *con_id)
spin_lock_irq(&pcd->lock);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (!con_id && !ce->con_id) {
- __pm_clk_remove(ce);
- break;
- } else if (!con_id || !ce->con_id) {
+ if (!con_id && !ce->con_id)
+ goto remove;
+ else if (!con_id || !ce->con_id)
continue;
- } else if (!strcmp(con_id, ce->con_id)) {
- __pm_clk_remove(ce);
- break;
- }
+ else if (!strcmp(con_id, ce->con_id))
+ goto remove;
}
spin_unlock_irq(&pcd->lock);
+ return;
+
+ remove:
+ list_del(&ce->node);
+ spin_unlock_irq(&pcd->lock);
+
+ __pm_clk_remove(ce);
}
/**
@@ -175,20 +192,27 @@ void pm_clk_destroy(struct device *dev)
{
struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce, *c;
+ struct list_head list;
if (!pcd)
return;
dev->power.subsys_data = NULL;
+ INIT_LIST_HEAD(&list);
spin_lock_irq(&pcd->lock);
list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
- __pm_clk_remove(ce);
+ list_move(&ce->node, &list);
spin_unlock_irq(&pcd->lock);
kfree(pcd);
+
+ list_for_each_entry_safe_reverse(ce, c, &list, node) {
+ list_del(&ce->node);
+ __pm_clk_remove(ce);
+ }
}
#endif /* CONFIG_PM */
@@ -196,23 +220,6 @@ void pm_clk_destroy(struct device *dev)
#ifdef CONFIG_PM_RUNTIME
/**
- * pm_clk_acquire - Acquire a device clock.
- * @dev: Device whose clock is to be acquired.
- * @con_id: Connection ID of the clock.
- */
-static void pm_clk_acquire(struct device *dev,
- struct pm_clock_entry *ce)
-{
- ce->clk = clk_get(dev, ce->con_id);
- if (IS_ERR(ce->clk)) {
- ce->status = PCE_STATUS_ERROR;
- } else {
- ce->status = PCE_STATUS_ACQUIRED;
- dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
- }
-}
-
-/**
* pm_clk_suspend - Disable clocks in a device's PM clock list.
* @dev: Device to disable the clocks for.
*/
@@ -230,9 +237,6 @@ int pm_clk_suspend(struct device *dev)
spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_disable(ce->clk);
ce->status = PCE_STATUS_ACQUIRED;
@@ -262,9 +266,6 @@ int pm_clk_resume(struct device *dev)
spin_lock_irqsave(&pcd->lock, flags);
list_for_each_entry(ce, &pcd->clock_list, node) {
- if (ce->status == PCE_STATUS_NONE)
- pm_clk_acquire(dev, ce);
-
if (ce->status < PCE_STATUS_ERROR) {
clk_enable(ce->clk);
ce->status = PCE_STATUS_ENABLED;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 98de8f41867..9955a53733b 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4250,7 +4250,7 @@ static int __init floppy_init(void)
use_virtual_dma = can_use_virtual_dma & 1;
fdc_state[0].address = FDC1;
if (fdc_state[0].address == -1) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -ENODEV;
goto out_unreg_region;
}
@@ -4261,7 +4261,7 @@ static int __init floppy_init(void)
fdc = 0; /* reset fdc in case of unexpected interrupt */
err = floppy_grab_irq_and_dma();
if (err) {
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
err = -EBUSY;
goto out_unreg_region;
}
@@ -4318,7 +4318,7 @@ static int __init floppy_init(void)
user_reset_fdc(-1, FD_RESET_ALWAYS, false);
}
fdc = 0;
- del_timer(&fd_timeout);
+ del_timer_sync(&fd_timeout);
current_drive = 0;
initialized = true;
if (have_no_fdc) {
@@ -4368,7 +4368,7 @@ out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
while (dr--) {
- del_timer(&motor_off_timer[dr]);
+ del_timer_sync(&motor_off_timer[dr]);
if (disks[dr]->queue)
blk_cleanup_queue(disks[dr]->queue);
put_disk(disks[dr]);
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 9e40b283a46..00c57c90e2d 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -46,7 +46,7 @@
#define DRV_PFX "xen-blkback:"
#define DPRINTK(fmt, args...) \
- pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
+ pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \
__func__, __LINE__, ##args)
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 3f129b45451..5fd2010f7d2 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -590,7 +590,7 @@ static void frontend_changed(struct xenbus_device *dev,
/*
* Enforce precondition before potential leak point.
- * blkif_disconnect() is idempotent.
+ * xen_blkif_disconnect() is idempotent.
*/
xen_blkif_disconnect(be->blkif);
@@ -601,17 +601,17 @@ static void frontend_changed(struct xenbus_device *dev,
break;
case XenbusStateClosing:
- xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosing);
break;
case XenbusStateClosed:
+ xen_blkif_disconnect(be->blkif);
xenbus_switch_state(dev, XenbusStateClosed);
if (xenbus_dev_is_online(dev))
break;
/* fall through if not online */
case XenbusStateUnknown:
- /* implies blkif_disconnect() via blkback_remove() */
+ /* implies xen_blkif_disconnect() via xen_blkbk_remove() */
device_unregister(&dev->dev);
break;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3ef476070ba..9cbac6b445e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -72,9 +72,15 @@ static struct usb_device_id btusb_table[] = {
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
+ /* Apple MacBookAir4,1 */
+ { USB_DEVICE(0x05ac, 0x821f) },
+
/* Apple MacBookPro8,2 */
{ USB_DEVICE(0x05ac, 0x821a) },
+ /* Apple MacMini5,1 */
+ { USB_DEVICE(0x05ac, 0x8281) },
+
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 65d27aff553..04d353f58d7 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -125,6 +125,13 @@ static long st_receive(void *priv_data, struct sk_buff *skb)
/* protocol structure registered with shared transport */
static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
{
+ .chnl_id = HCI_EVENT_PKT, /* HCI Events */
+ .hdr_len = sizeof(struct hci_event_hdr),
+ .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
+ .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
+ .reserve = 8,
+ },
+ {
.chnl_id = HCI_ACLDATA_PKT, /* ACL */
.hdr_len = sizeof(struct hci_acl_hdr),
.offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen),
@@ -138,13 +145,6 @@ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
.reserve = 8,
},
- {
- .chnl_id = HCI_EVENT_PKT, /* HCI Events */
- .hdr_len = sizeof(struct hci_event_hdr),
- .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
- .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
- .reserve = 8,
- },
};
/* Called from HCI core to initialize the device */
@@ -240,7 +240,7 @@ static int ti_st_close(struct hci_dev *hdev)
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
- for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
+ for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
err = st_unregister(&ti_st_proto[i]);
if (err)
BT_ERR("st_unregister(%d) failed with error %d",
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index f6595aba4f0..fa567f1158c 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -43,6 +43,7 @@ config TCG_NSC
config TCG_ATMEL
tristate "Atmel TPM Interface"
+ depends on PPC64 || HAS_IOPORT
---help---
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index caf8012ef47..9ca5c021d0b 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -383,6 +383,9 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
u32 count, ordinal;
unsigned long stop;
+ if (bufsiz > TPM_BUFSIZE)
+ bufsiz = TPM_BUFSIZE;
+
count = be32_to_cpu(*((__be32 *) (buf + 2)));
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
if (count == 0)
@@ -1102,6 +1105,7 @@ ssize_t tpm_read(struct file *file, char __user *buf,
{
struct tpm_chip *chip = file->private_data;
ssize_t ret_size;
+ int rc;
del_singleshot_timer_sync(&chip->user_read_timer);
flush_work_sync(&chip->work);
@@ -1112,8 +1116,11 @@ ssize_t tpm_read(struct file *file, char __user *buf,
ret_size = size;
mutex_lock(&chip->buffer_mutex);
- if (copy_to_user(buf, chip->data_buffer, ret_size))
+ rc = copy_to_user(buf, chip->data_buffer, ret_size);
+ memset(chip->data_buffer, 0, ret_size);
+ if (rc)
ret_size = -EFAULT;
+
mutex_unlock(&chip->buffer_mutex);
}
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 82facc9104c..4d2464871ad 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -396,8 +396,6 @@ static void __exit cleanup_nsc(void)
if (pdev) {
tpm_nsc_remove(&pdev->dev);
platform_device_unregister(pdev);
- kfree(pdev);
- pdev = NULL;
}
platform_driver_unregister(&nsc_drv);
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 7b0603eb012..cdc02ac8f41 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -261,6 +261,9 @@ static int pcc_get_offset(int cpu)
pr = per_cpu(processors, cpu);
pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+ if (!pr)
+ return -ENODEV;
+
status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
if (ACPI_FAILURE(status))
return -ENODEV;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 57cd3a406ed..fd7170a9ad2 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -290,6 +290,9 @@ static const struct {
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_CYCLE_TIMER},
+ {PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_NO_MSI},
+
{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_CYCLE_TIMER},
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd96d4..4caa3d37bbd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,6 +178,15 @@ config GPIO_SCH
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948c96f..19c5d27b6d2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
@@ -37,18 +40,20 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
diff --git a/arch/arm/mach-davinci/gpio.c b/drivers/gpio/gpio-davinci.c
index cafbe13a82a..df0d59570a8 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -9,15 +9,13 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
+#include <linux/gpio.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <mach/gpio.h>
-
#include <asm/mach/irq.h>
struct davinci_gpio_regs {
@@ -232,9 +230,6 @@ static void gpio_irq_enable(struct irq_data *d)
static int gpio_irq_type(struct irq_data *d, unsigned trigger)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c66532..7aafbb43733 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
#include <linux/basic_mmio_gpio.h>
#include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
struct ep93xx_gpio {
void __iomem *mmio_base;
@@ -307,6 +310,21 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
return 0;
}
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+ return -EINVAL;
+
+ return 64 + gpio;
+}
+
static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
{
@@ -321,8 +339,10 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
bgc->gc.label = bank->label;
bgc->gc.base = bank->base;
- if (bank->has_debounce)
+ if (bank->has_debounce) {
bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+ bgc->gc.to_irq = ep93xx_gpio_to_irq;
+ }
return gpiochip_add(&bgc->gc);
}
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 231714def4d..4e24436b0f8 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -351,7 +351,7 @@ static int bgpio_setup_direction(struct bgpio_chip *bgc,
return 0;
}
-int __devexit bgpio_remove(struct bgpio_chip *bgc)
+int bgpio_remove(struct bgpio_chip *bgc)
{
int err = gpiochip_remove(&bgc->gc);
@@ -361,15 +361,10 @@ int __devexit bgpio_remove(struct bgpio_chip *bgc)
}
EXPORT_SYMBOL_GPL(bgpio_remove);
-int __devinit bgpio_init(struct bgpio_chip *bgc,
- struct device *dev,
- unsigned long sz,
- void __iomem *dat,
- void __iomem *set,
- void __iomem *clr,
- void __iomem *dirout,
- void __iomem *dirin,
- bool big_endian)
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+ unsigned long sz, void __iomem *dat, void __iomem *set,
+ void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+ bool big_endian)
{
int ret;
diff --git a/arch/arm/mach-ks8695/gpio.c b/drivers/gpio/gpio-ks8695.c
index 31e456508a6..a3ac66ea364 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/drivers/gpio/gpio-ks8695.c
@@ -18,7 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
@@ -31,7 +31,7 @@
#include <asm/mach/irq.h>
#include <mach/regs-gpio.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
/*
* Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/drivers/gpio/gpio-lpc32xx.c
index 69061ea8997..5b6948081f8 100644
--- a/arch/arm/mach-lpc32xx/gpiolib.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -24,7 +24,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
-#include "common.h"
+#include <mach/gpio-lpc32xx.h>
#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c732d7..740caed2b27 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854e221..9c27244fd68 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <asm/mach/irq.h>
struct gpio_bank {
diff --git a/arch/arm/plat-pxa/gpio.c b/drivers/gpio/gpio-pxa.c
index a11dc367050..9052925c6fa 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
int pxa_last_gpio;
diff --git a/arch/arm/mach-sa1100/gpio.c b/drivers/gpio/gpio-sa1100.c
index 0d3829a8c2c..b6c1f6d8064 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -7,13 +7,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
-#include "generic.h"
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40e8af..6b65207c810 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
+#include <mach/gpio-tegra.h>
#include <mach/iomap.h>
#include <mach/suspend.h>
@@ -134,7 +135,10 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
return 0;
}
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return TEGRA_GPIO_TO_IRQ(offset);
+}
static struct gpio_chip tegra_gpio_chip = {
.label = "tegra-gpio",
@@ -142,6 +146,7 @@ static struct gpio_chip tegra_gpio_chip = {
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .to_irq = tegra_gpio_to_irq,
.base = 0,
.ngpio = TEGRA_NR_GPIOS,
};
@@ -331,6 +336,7 @@ static struct lock_class_key gpio_lock_class;
static int __init tegra_gpio_init(void)
{
struct tegra_gpio_bank *bank;
+ int gpio;
int i;
int j;
@@ -352,14 +358,17 @@ static int __init tegra_gpio_init(void)
gpiochip_add(&tegra_gpio_chip);
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+ for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+ int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ /* No validity check; all Tegra GPIOs are valid IRQs */
+
+ bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
+ irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
index 3fa3e2867e1..3fa3e2867e1 100644
--- a/arch/arm/mach-davinci/gpio-tnetv107x.c
+++ b/drivers/gpio/gpio-tnetv107x.c
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255cb0b..4035778852b 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* This can driver either of the two basic GPIO cores
* available in the U300 platforms:
* COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -21,677 +20,898 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ * is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ * impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN 0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT 0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP 0x1002
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ * low, this is the most typical case and is typically achieved with two
+ * active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ * (open collector) which means it is usually wired with other output
+ * ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ * (open emitter) which is the same as open drain mutatis mutandis but
+ * pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL 0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN 0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE 0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR (0x00)
+#define U300_335_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR (0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV (0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN (0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR (0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR (0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER (0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR (0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE (0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR (0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR (0x04)
+#define U300_571_PXPDOR (0x08)
+#define U300_571_PXPCR (0x0C)
+#define U300_571_PXPER (0x10)
+#define U300_571_PXIEV (0x14)
+#define U300_571_PXIEN (0x18)
+#define U300_571_PXIFR (0x1C)
+#define U300_571_PXICR (0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+ struct gpio_chip chip;
+ struct list_head port_list;
+ struct clk *clk;
+ struct resource *memres;
+ void __iomem *base;
+ struct device *dev;
+ int irq_base;
+ u32 stride;
+ /* Register offsets */
+ u32 pcr;
+ u32 dor;
+ u32 dir;
+ u32 per;
+ u32 icr;
+ u32 ien;
+ u32 iev;
+};
struct u300_gpio_port {
- const char *name;
+ struct list_head node;
+ struct u300_gpio *gpio;
+ char name[8];
int irq;
int number;
+ u8 toggle_edge_mode;
};
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+ (gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
-static struct u300_gpio_port gpio_ports[] = {
- {
- .name = "gpio0",
- .number = 0,
- },
- {
- .name = "gpio1",
- .number = 1,
- },
- {
- .name = "gpio2",
- .number = 2,
- },
-#ifdef U300_COH901571_3
- {
- .name = "gpio3",
- .number = 3,
- },
- {
- .name = "gpio4",
- .number = 4,
- },
-#ifdef CONFIG_MACH_U300_BS335
- {
- .name = "gpio5",
- .number = 5,
- },
- {
- .name = "gpio6",
- .number = 6,
- },
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+ (1 << (pin & 0x07))
+struct u300_gpio_confdata {
+ u16 bias_mode;
+ bool output;
+ int outval;
};
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+ .output = false, \
+}
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW 0
-#define DEFAULT_OUTPUT_HIGH 1
+#define U300_PULL_UP_INPUT { \
+ .bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+ .output = false, \
+}
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP 0
-#define ENABLE_PULL_UP 1
+#define U300_OUTPUT_LOW { \
+ .output = true, \
+ .outval = 0, \
+}
-#define GPIO_NOT_USED 0
-#define GPIO_IN 1
-#define GPIO_OUT 2
+#define U300_OUTPUT_HIGH { \
+ .output = true, \
+ .outval = 1, \
+}
-struct u300_gpio_configuration_data {
- unsigned char pin_usage;
- unsigned char default_output_value;
- unsigned char pull_up;
-};
/* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 5, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 6, pind 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
}
-#endif
+};
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
/* Port 0, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_FLOATING_INPUT,
},
/* Port 1, pins 0-7 */
{
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_LOW,
+ U300_FLOATING_INPUT,
+ U300_FLOATING_INPUT,
+ U300_OUTPUT_HIGH,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
},
/* Port 2, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_FLOATING_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 3, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
},
/* Port 4, pins 0-7 */
{
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
+ U300_PULL_UP_INPUT,
/* These 4 pins doesn't exist on DB3210 */
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
- {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
+ U300_OUTPUT_LOW,
}
-#endif
};
-#endif
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
- int (*callback)(void *);
- void *data;
- int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
*/
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
{
- if (gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "registered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = func;
- gpio_pin[gpio].data = data;
-
- return 0;
+ return container_of(chip, struct u300_gpio, chip);
}
-EXPORT_SYMBOL(gpio_register_callback);
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- if (!gpio_pin[gpio].callback)
- dev_warn(gpiodev, "%s: WARNING: callback already "
- "unregistered for gpio pin#%d\n", __func__, gpio);
- gpio_pin[gpio].callback = NULL;
- gpio_pin[gpio].data = NULL;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
- return 0;
+ return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
}
-EXPORT_SYMBOL(gpio_unregister_callback);
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- if (number >= 0 &&
- number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
- return 1;
- return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-int gpio_request(unsigned gpio, const char *label)
-{
- if (gpio_pin[gpio].users)
- return -EINVAL;
- else
- gpio_pin[gpio].users++;
+ local_irq_save(flags);
- gpio_users++;
+ val = readl(U300_PIN_REG(offset, dor));
+ if (value)
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
+ else
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
- return 0;
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- gpio_users--;
- gpio_pin[gpio].users--;
- if (unlikely(gpio_pin[gpio].users < 0)) {
- dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
- gpio);
- gpio_pin[gpio].users = 0;
- }
-
- return;
-}
-EXPORT_SYMBOL(gpio_free);
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ unsigned long flags;
+ u32 val;
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
- return readl(virtbase + U300_GPIO_PXPDIR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+ local_irq_save(flags);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /* Mask out this pin, note 2 bits per setting */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_get_value);
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
- u32 val;
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
+ u32 oldmode;
+ u32 val;
local_irq_save(flags);
- if (value) {
- /* set */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val | (1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- /* clear */
- val = readl(virtbase + U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
- & (1 << (gpio & 0x07));
- writel(val & ~(1 << (gpio & 0x07)), virtbase +
- U300_GPIO_PXPDOR +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, pcr));
+ /*
+ * Drive mode must be set by the special mode set function, set
+ * push/pull mode by default if no mode has been selected.
+ */
+ oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ /* mode = 0 means input, else some mode is already set */
+ if (oldmode == 0) {
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+ ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
}
+ u300_gpio_set(chip, offset, value);
local_irq_restore(flags);
+ return 0;
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
+ int retirq = gpio->irq_base + offset;
+
+ dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+ retirq);
+ return retirq;
+}
+
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+ u16 param, unsigned long *data)
+{
+ struct u300_gpio *gpio = to_u300_gpio(chip);
unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin*/
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /* This is not needed since it sets the bits to zero.*/
- /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ switch (param) {
+ case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+ case GPIO_U300_CONFIG_BIAS_FLOAT:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_BIAS_PULL_UP:
+ val = readl(U300_PIN_REG(offset, per));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+ val = readl(U300_PIN_REG(offset, pcr));
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+ << ((offset & 0x07) << 1));
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+ << ((offset & 0x07) << 1));
+ writel(val, U300_PIN_REG(offset, pcr));
+ break;
+ default:
+ local_irq_restore(flags);
+ dev_err(gpio->dev, "illegal configuration requested\n");
+ return -EINVAL;
+ }
local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio, int value)
+static struct gpio_chip u300_gpio_chip = {
+ .label = "u300-gpio-chip",
+ .owner = THIS_MODULE,
+ .get = u300_gpio_get,
+ .set = u300_gpio_set,
+ .direction_input = u300_gpio_direction_input,
+ .direction_output = u300_gpio_direction_output,
+ .to_irq = u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
{
- unsigned long flags;
u32 val;
- if (gpio > U300_GPIO_MAX)
- return -EINVAL;
-
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
- /*
- * FIXME: configure for push/pull, open drain or open source per pin
- * in setup. The current driver will only support push/pull.
- */
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
- << ((gpio & 0x07) << 1));
- writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- gpio_set_value(gpio, value);
- local_irq_restore(flags);
- return 0;
+ val = readl(U300_PIN_REG(offset, icr));
+ /* Set mode depending on state */
+ if (u300_gpio_get(&gpio->chip, offset)) {
+ /* High now, let's trigger on falling edge next then */
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+ offset);
+ } else {
+ /* Low now, let's trigger on rising edge next then */
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+ offset);
+ }
}
-EXPORT_SYMBOL(gpio_direction_output);
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
- unsigned long flags;
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val |= (1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- if (edge)
- val |= (1 << (gpio & 0x07));
- else
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ if ((trigger & IRQF_TRIGGER_RISING) &&
+ (trigger & IRQF_TRIGGER_FALLING)) {
+ /*
+ * The GPIO block can only trigger on falling OR rising edges,
+ * not both. So we need to toggle the mode whenever the pin
+ * goes from one state to the other with a special state flag
+ */
+ dev_dbg(gpio->dev,
+ "trigger on both rising and falling edge on pin %d\n",
+ offset);
+ port->toggle_edge_mode |= U300_PIN_BIT(offset);
+ u300_toggle_trigger(gpio, offset);
+ } else if (trigger & IRQF_TRIGGER_RISING) {
+ dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ } else if (trigger & IRQF_TRIGGER_FALLING) {
+ dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+ offset);
+ val = readl(U300_PIN_REG(offset, icr));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+ port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+ }
+
+ return 0;
}
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
-void disable_irq_on_gpio_pin(unsigned gpio)
+static void u300_gpio_irq_enable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- val &= ~(1 << (gpio & 0x07));
- writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
+static void u300_gpio_irq_disable(struct irq_data *d)
{
+ struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+ struct u300_gpio *gpio = port->gpio;
+ int offset = d->irq - gpio->irq_base;
u32 val;
unsigned long flags;
local_irq_save(flags);
- if (value) {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- } else {
- val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
- U300_GPIO_PORTX_SPACING);
- writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
- PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
- }
+ val = readl(U300_PIN_REG(offset, ien));
+ writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_pullup);
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+static struct irq_chip u300_gpio_irqchip = {
+ .name = "u300-gpio-irqchip",
+ .irq_enable = u300_gpio_irq_enable,
+ .irq_disable = u300_gpio_irq_disable,
+ .irq_set_type = u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct u300_gpio_port *port = dev_id;
- u32 val;
- int pin;
+ struct u300_gpio_port *port = irq_get_handler_data(irq);
+ struct u300_gpio *gpio = port->gpio;
+ int pinoffset = port->number << 3; /* get the right stride */
+ unsigned long val;
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
/* Read event register */
- val = readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Mask with enable register */
- val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
+ val = readl(U300_PIN_REG(pinoffset, iev));
/* Mask relevant bits */
- val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+ val &= 0xFFU; /* 8 bits per port */
/* ACK IRQ (clear event) */
- writel(val, virtbase + U300_GPIO_PXIEV + port->number *
- U300_GPIO_PORTX_SPACING);
- /* Print message */
- while (val != 0) {
- unsigned gpio;
-
- pin = __ffs(val);
- /* mask off this pin */
- val &= ~(1 << pin);
- gpio = (port->number << 3) + pin;
-
- if (gpio_pin[gpio].callback)
- (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
- else
- dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
- gpio);
+ writel(val, U300_PIN_REG(pinoffset, iev));
+
+ /* Call IRQ handler */
+ if (val != 0) {
+ int irqoffset;
+
+ for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+ int pin_irq = gpio->irq_base + (port->number << 3)
+ + irqoffset;
+ int offset = pinoffset + irqoffset;
+
+ dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+ pin_irq, offset);
+ generic_handle_irq(pin_irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs mockery
+ */
+ if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+ u300_toggle_trigger(gpio, offset);
+ }
}
- return IRQ_HANDLED;
+
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
-static void gpio_set_initial_values(void)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+ int offset,
+ const struct u300_gpio_confdata *conf)
{
-#ifdef U300_COH901571_3
- int i, j;
- unsigned long flags;
- u32 val;
+ /* Set mode: input or output */
+ if (conf->output) {
+ u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
- /* Write default values to all pins */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+ /* Deactivate bias mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_BIAS_FLOAT,
+ NULL);
+
+ /* Set drive mode for output */
+ u300_gpio_config(&gpio->chip, offset,
+ GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+ offset, conf->outval);
+ } else {
+ u300_gpio_direction_input(&gpio->chip, offset);
+
+ /* Always set output low on input pins */
+ u300_gpio_set(&gpio->chip, offset, 0);
+
+ /* Set bias mode for input */
+ u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+ dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+ offset, conf->bias_mode);
}
+}
- /*
- * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initialize
- * default value on outputs.
- */
- for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
- for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
- local_irq_save(flags);
- val = readl(virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- /* Mask out this pin */
- val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
- if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
- val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
- writel(val, virtbase + U300_GPIO_PXPCR +
- i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+ struct u300_gpio_platform *plat)
+{
+ int i, j;
+
+ /* Write default config and values to all pins */
+ for (i = 0; i < plat->ports; i++) {
+ for (j = 0; j < 8; j++) {
+ const struct u300_gpio_confdata *conf;
+ int offset = (i*8) + j;
+
+ if (plat->variant == U300_GPIO_COH901571_3_BS335)
+ conf = &bs335_gpio_config[i][j];
+ else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+ conf = &bs365_gpio_config[i][j];
+ else
+ break;
+
+ u300_gpio_init_pin(gpio, offset, conf);
}
}
+}
- /* Enable or disable the internal pull-ups in the GPIO ASIC block */
- for (i = 0; i < U300_GPIO_MAX; i++) {
- val = 0;
- for (j = 0; j < 8; j++)
- val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
- local_irq_save(flags);
- writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
- local_irq_restore(flags);
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+ struct u300_gpio_port *port;
+ struct list_head *p, *n;
+
+ list_for_each_safe(p, n, &gpio->port_list) {
+ port = list_entry(p, struct u300_gpio_port, node);
+ list_del(&port->node);
+ free_irq(port->irq, port);
+ kfree(port);
}
-#endif
}
-static int __init gpio_probe(struct platform_device *pdev)
+static int __init u300_gpio_probe(struct platform_device *pdev)
{
- u32 val;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio;
int err = 0;
+ int portno;
+ u32 val;
+ u32 ifr;
int i;
- int num_irqs;
- gpiodev = &pdev->dev;
- memset(gpio_pin, 0, sizeof(gpio_pin));
+ gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+ if (gpio == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ gpio->chip = u300_gpio_chip;
+ gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+ gpio->irq_base = plat->gpio_irq_base;
+ gpio->chip.dev = &pdev->dev;
+ gpio->chip.base = plat->gpio_base;
+ gpio->dev = &pdev->dev;
/* Get GPIO clock */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- dev_err(gpiodev, "could not get GPIO clock\n");
+ gpio->clk = clk_get(gpio->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ err = PTR_ERR(gpio->clk);
+ dev_err(gpio->dev, "could not get GPIO clock\n");
goto err_no_clk;
}
- err = clk_enable(clk);
+ err = clk_enable(gpio->clk);
if (err) {
- dev_err(gpiodev, "could not enable GPIO clock\n");
+ dev_err(gpio->dev, "could not enable GPIO clock\n");
goto err_no_clk_enable;
}
- memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!memres)
+ gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!gpio->memres) {
+ dev_err(gpio->dev, "could not get GPIO memory resource\n");
+ err = -ENODEV;
goto err_no_resource;
+ }
- if (!request_mem_region(memres->start, resource_size(memres),
+ if (!request_mem_region(gpio->memres->start,
+ resource_size(gpio->memres),
"GPIO Controller")) {
err = -ENODEV;
goto err_no_ioregion;
}
- virtbase = ioremap(memres->start, resource_size(memres));
- if (!virtbase) {
+ gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+ if (!gpio->base) {
err = -ENOMEM;
goto err_no_ioremap;
}
- dev_info(gpiodev, "remapped 0x%08x to %p\n",
- memres->start, virtbase);
-
-#ifdef U300_COH901335
- dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
- /* Turn on the GPIO block */
- writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
- dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
- val = readl(virtbase + U300_GPIO_CR);
- dev_info(gpiodev, "COH901571/3 block version: %d, " \
- "number of cores: %d\n",
- ((val & 0x0000FE00) >> 9),
- ((val & 0x000001FC) >> 2));
- writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
- gpio_set_initial_values();
-
- for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
- gpio_ports[num_irqs].irq =
- platform_get_irq_byname(pdev,
- gpio_ports[num_irqs].name);
-
- err = request_irq(gpio_ports[num_irqs].irq,
- gpio_irq_handler, IRQF_DISABLED,
- gpio_ports[num_irqs].name,
- &gpio_ports[num_irqs]);
- if (err) {
- dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
- gpio_ports[num_irqs].name);
- goto err_no_irq;
+
+ if (plat->variant == U300_GPIO_COH901335) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 335\n");
+ gpio->stride = U300_335_PORT_STRIDE;
+ gpio->pcr = U300_335_PXPCR;
+ gpio->dor = U300_335_PXPDOR;
+ gpio->dir = U300_335_PXPDIR;
+ gpio->per = U300_335_PXPER;
+ gpio->icr = U300_335_PXICR;
+ gpio->ien = U300_335_PXIEN;
+ gpio->iev = U300_335_PXIEV;
+ ifr = U300_335_PXIFR;
+
+ /* Turn on the GPIO block */
+ writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+ gpio->base + U300_335_CR);
+ } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365) {
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_571_PORT_STRIDE;
+ gpio->pcr = U300_571_PXPCR;
+ gpio->dor = U300_571_PXPDOR;
+ gpio->dir = U300_571_PXPDIR;
+ gpio->per = U300_571_PXPER;
+ gpio->icr = U300_571_PXICR;
+ gpio->ien = U300_571_PXIEN;
+ gpio->iev = U300_571_PXIEV;
+ ifr = U300_571_PXIFR;
+
+ val = readl(gpio->base + U300_571_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_571_CR);
+ u300_gpio_init_coh901571(gpio, plat);
+ } else {
+ dev_err(gpio->dev, "unknown block variant\n");
+ err = -ENODEV;
+ goto err_unknown_variant;
+ }
+
+ /* Add each port with its IRQ separately */
+ INIT_LIST_HEAD(&gpio->port_list);
+ for (portno = 0 ; portno < plat->ports; portno++) {
+ struct u300_gpio_port *port =
+ kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+ if (!port) {
+ dev_err(gpio->dev, "out of memory\n");
+ err = -ENOMEM;
+ goto err_no_port;
}
- /* Turns off PortX_irq_force */
- writel(0x0, virtbase + U300_GPIO_PXIFR +
- num_irqs * U300_GPIO_PORTX_SPACING);
+
+ snprintf(port->name, 8, "gpio%d", portno);
+ port->number = portno;
+ port->gpio = gpio;
+
+ port->irq = platform_get_irq_byname(pdev,
+ port->name);
+
+ dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+ port->name);
+
+ irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+ irq_set_handler_data(port->irq, port);
+
+ /* For each GPIO pin set the unique IRQ handler */
+ for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+ int irqno = gpio->irq_base + (portno << 3) + i;
+
+ dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+ irqno, port->name);
+ irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ irq_set_chip_data(irqno, port);
+ }
+
+ /* Turns off irq force (test register) for this port */
+ writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+ list_add_tail(&port->node, &gpio->port_list);
}
+ dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+ err = gpiochip_add(&gpio->chip);
+ if (err) {
+ dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+ goto err_no_chip;
+ }
+
+ platform_set_drvdata(pdev, gpio);
return 0;
- err_no_irq:
- for (i = 0; i < num_irqs; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- err_no_ioremap:
- release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
- clk_disable(clk);
- err_no_clk_enable:
- clk_put(clk);
- err_no_clk:
- dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+ u300_gpio_free_ports(gpio);
+err_unknown_variant:
+ iounmap(gpio->base);
+err_no_ioremap:
+ release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+ clk_disable(gpio->clk);
+err_no_clk_enable:
+ clk_put(gpio->clk);
+err_no_clk:
+ kfree(gpio);
+ dev_info(&pdev->dev, "module ERROR:%d\n", err);
return err;
}
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- int i;
+ struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+ struct u300_gpio *gpio = platform_get_drvdata(pdev);
+ int err;
/* Turn off the GPIO block */
- writel(0x00000000U, virtbase + U300_GPIO_CR);
- for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
- free_irq(gpio_ports[i].irq, &gpio_ports[i]);
- iounmap(virtbase);
- release_mem_region(memres->start, resource_size(memres));
- clk_disable(clk);
- clk_put(clk);
+ if (plat->variant == U300_GPIO_COH901335)
+ writel(0x00000000U, gpio->base + U300_335_CR);
+ if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+ plat->variant == U300_GPIO_COH901571_3_BS365)
+ writel(0x00000000U, gpio->base + U300_571_CR);
+
+ err = gpiochip_remove(&gpio->chip);
+ if (err < 0) {
+ dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+ return err;
+ }
+ u300_gpio_free_ports(gpio);
+ iounmap(gpio->base);
+ release_mem_region(gpio->memres->start,
+ resource_size(gpio->memres));
+ clk_disable(gpio->clk);
+ clk_put(gpio->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(gpio);
return 0;
}
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
.driver = {
.name = "u300-gpio",
},
- .remove = __exit_p(gpio_remove),
+ .remove = __exit_p(u300_gpio_remove),
};
static int __init u300_gpio_init(void)
{
- return platform_driver_probe(&gpio_driver, gpio_probe);
+ return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
}
static void __exit u300_gpio_exit(void)
{
- platform_driver_unregister(&gpio_driver);
+ platform_driver_unregister(&u300_gpio_driver);
}
arch_initcall(u300_gpio_init);
module_exit(u300_gpio_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ce045a8cf82..f07e4252b70 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -67,11 +67,11 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6 (default: true)");
-unsigned int i915_enable_fbc __read_mostly = 1;
+unsigned int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
- "(default: false)");
+ "(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 56a8554d903..04411ad2e77 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1799,6 +1799,7 @@ static void intel_update_fbc(struct drm_device *dev)
struct drm_framebuffer *fb;
struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj;
+ int enable_fbc;
DRM_DEBUG_KMS("\n");
@@ -1839,8 +1840,15 @@ static void intel_update_fbc(struct drm_device *dev)
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
- if (!i915_enable_fbc) {
- DRM_DEBUG_KMS("fbc disabled per module param (default off)\n");
+ enable_fbc = i915_enable_fbc;
+ if (enable_fbc < 0) {
+ DRM_DEBUG_KMS("fbc set to per-chip default\n");
+ enable_fbc = 1;
+ if (INTEL_INFO(dev)->gen <= 5)
+ enable_fbc = 0;
+ }
+ if (!enable_fbc) {
+ DRM_DEBUG_KMS("fbc disabled per module param\n");
dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
goto out_disable;
}
@@ -4687,13 +4695,13 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
bpc = 6; /* min is 18bpp */
break;
case 24:
- bpc = min((unsigned int)8, display_bpc);
+ bpc = 8;
break;
case 30:
- bpc = min((unsigned int)10, display_bpc);
+ bpc = 10;
break;
case 48:
- bpc = min((unsigned int)12, display_bpc);
+ bpc = 12;
break;
default:
DRM_DEBUG("unsupported depth, assuming 24 bits\n");
@@ -4701,10 +4709,12 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
break;
}
+ display_bpc = min(display_bpc, bpc);
+
DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
bpc, display_bpc);
- *pipe_bpp = bpc * 3;
+ *pipe_bpp = display_bpc * 3;
return display_bpc != bpc;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0b2ee9d3998..fe1099d8817 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -337,9 +337,6 @@ extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_connector *connector,
struct intel_load_detect_pipe *old);
-extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
-extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
-extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 30fe554d893..6348c499616 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -92,6 +92,11 @@ struct intel_sdvo {
*/
uint16_t attached_output;
+ /*
+ * Hotplug activation bits for this device
+ */
+ uint8_t hotplug_active[2];
+
/**
* This is used to select the color range of RBG outputs in HDMI mode.
* It is only valid when using TMDS encoding and 8 bit per color mode.
@@ -1208,74 +1213,20 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
return true;
}
-/* No use! */
-#if 0
-struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
- struct drm_connector *connector = NULL;
- struct intel_sdvo *iout = NULL;
- struct intel_sdvo *sdvo;
-
- /* find the sdvo connector */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- iout = to_intel_sdvo(connector);
-
- if (iout->type != INTEL_OUTPUT_SDVO)
- continue;
-
- sdvo = iout->dev_priv;
-
- if (sdvo->sdvo_reg == SDVOB && sdvoB)
- return connector;
-
- if (sdvo->sdvo_reg == SDVOC && !sdvoB)
- return connector;
-
- }
-
- return NULL;
-}
-
-int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
{
u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo;
- DRM_DEBUG_KMS("\n");
-
- if (!connector)
- return 0;
-
- intel_sdvo = to_intel_sdvo(connector);
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&response, 2) && response[0];
}
-void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
{
- u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- if (on) {
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
- status = intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- } else {
- response[0] = 0;
- response[1] = 0;
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- }
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
+ intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
}
-#endif
static bool
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
@@ -2045,6 +1996,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
{
struct drm_encoder *encoder = &intel_sdvo->base.base;
struct drm_connector *connector;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
struct intel_connector *intel_connector;
struct intel_sdvo_connector *intel_sdvo_connector;
@@ -2062,7 +2014,17 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+ if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ intel_sdvo->hotplug_active[0] |= 1 << device;
+ /* Some SDVO devices have one-shot hotplug interrupts.
+ * Ensure that they get re-enabled when an interrupt happens.
+ */
+ intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+ intel_sdvo_enable_hotplug(intel_encoder);
+ }
+ else
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
@@ -2569,6 +2531,14 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
+ /* Set up hotplug command - note paranoia about contents of reply.
+ * We assume that the hardware is in a sane state, and only touch
+ * the bits we think we understand.
+ */
+ intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+ &intel_sdvo->hotplug_active, 2);
+ intel_sdvo->hotplug_active[0] &= ~0x3;
+
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 7ad43c6b1db..4da23889fea 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -115,6 +115,7 @@ static int radeon_dp_aux_native_write(struct radeon_connector *radeon_connector,
u8 msg[20];
int msg_bytes = send_bytes + 4;
u8 ack;
+ unsigned retry;
if (send_bytes > 16)
return -1;
@@ -125,20 +126,20 @@ static int radeon_dp_aux_native_write(struct radeon_connector *radeon_connector,
msg[3] = (msg_bytes << 4) | (send_bytes - 1);
memcpy(&msg[4], send, send_bytes);
- while (1) {
+ for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, NULL, 0, delay, &ack);
if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
- break;
+ return send_bytes;
else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
udelay(400);
else
return -EIO;
}
- return send_bytes;
+ return -EIO;
}
static int radeon_dp_aux_native_read(struct radeon_connector *radeon_connector,
@@ -149,26 +150,29 @@ static int radeon_dp_aux_native_read(struct radeon_connector *radeon_connector,
int msg_bytes = 4;
u8 ack;
int ret;
+ unsigned retry;
msg[0] = address;
msg[1] = address >> 8;
msg[2] = AUX_NATIVE_READ << 4;
msg[3] = (msg_bytes << 4) | (recv_bytes - 1);
- while (1) {
+ for (retry = 0; retry < 4; retry++) {
ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
msg, msg_bytes, recv, recv_bytes, delay, &ack);
- if (ret == 0)
- return -EPROTO;
if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
return ret;
else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
udelay(400);
+ else if (ret == 0)
+ return -EPROTO;
else
return -EIO;
}
+
+ return -EIO;
}
static void radeon_write_dpcd_reg(struct radeon_connector *radeon_connector,
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index dc0a5b56c81..c4ffa14fb2f 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1404,7 +1404,8 @@ int evergreen_cp_resume(struct radeon_device *rdev)
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
WREG32(CP_RB_RPTR_WR, 0);
- WREG32(CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
@@ -1426,7 +1427,6 @@ int evergreen_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
rdev->cp.rptr = RREG32(CP_RB_RPTR);
- rdev->cp.wptr = RREG32(CP_RB_WPTR);
evergreen_cp_start(rdev);
rdev->cp.ready = true;
@@ -1590,48 +1590,6 @@ static u32 evergreen_get_tile_pipe_to_backend_map(struct radeon_device *rdev,
return backend_map;
}
-static void evergreen_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- case 2:
- case 3:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- }
-
- switch (rdev->family) {
- case CHIP_HEMLOCK:
- case CHIP_CYPRESS:
- case CHIP_BARTS:
- tcp_chan_steer_lo = 0x54763210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- case CHIP_JUNIPER:
- case CHIP_REDWOOD:
- case CHIP_CEDAR:
- case CHIP_PALM:
- case CHIP_SUMO:
- case CHIP_SUMO2:
- case CHIP_TURKS:
- case CHIP_CAICOS:
- default:
- tcp_chan_steer_lo = 0x76543210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- }
-
- WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
- WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static void evergreen_gpu_init(struct radeon_device *rdev)
{
u32 cc_rb_backend_disable = 0;
@@ -2078,8 +2036,6 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
- evergreen_program_channel_remap(rdev);
-
num_shader_engines = ((RREG32(GB_ADDR_CONFIG) & NUM_SHADER_ENGINES(3)) >> 12) + 1;
grbm_gfx_index = INSTANCE_BROADCAST_WRITES;
@@ -3171,21 +3127,23 @@ int evergreen_suspend(struct radeon_device *rdev)
}
int evergreen_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence)
+ uint64_t src_offset,
+ uint64_t dst_offset,
+ unsigned num_gpu_pages,
+ struct radeon_fence *fence)
{
int r;
mutex_lock(&rdev->r600_blit.mutex);
rdev->r600_blit.vb_ib = NULL;
- r = evergreen_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
if (r) {
if (rdev->r600_blit.vb_ib)
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
mutex_unlock(&rdev->r600_blit.mutex);
return r;
}
- evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+ evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
evergreen_blit_done_copy(rdev, fence);
mutex_unlock(&rdev->r600_blit.mutex);
return 0;
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index cbf57d75d92..8c79ca97753 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -569,36 +569,6 @@ static u32 cayman_get_tile_pipe_to_backend_map(struct radeon_device *rdev,
return backend_map;
}
-static void cayman_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- case 2:
- case 3:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- }
-
- switch (rdev->family) {
- case CHIP_CAYMAN:
- default:
- //tcp_chan_steer_lo = 0x54763210
- tcp_chan_steer_lo = 0x76543210;
- tcp_chan_steer_hi = 0x0000ba98;
- break;
- }
-
- WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
- WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static u32 cayman_get_disable_mask_per_asic(struct radeon_device *rdev,
u32 disable_mask_per_se,
u32 max_disable_mask_per_se,
@@ -842,8 +812,6 @@ static void cayman_gpu_init(struct radeon_device *rdev)
WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
- cayman_program_channel_remap(rdev);
-
/* primary versions */
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
@@ -1187,7 +1155,8 @@ int cayman_cp_resume(struct radeon_device *rdev)
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB0_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB0_WPTR, rdev->cp.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1207,7 +1176,6 @@ int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_RB0_BASE, rdev->cp.gpu_addr >> 8);
rdev->cp.rptr = RREG32(CP_RB0_RPTR);
- rdev->cp.wptr = RREG32(CP_RB0_WPTR);
/* ring1 - compute only */
/* Set ring buffer size */
@@ -1220,7 +1188,8 @@ int cayman_cp_resume(struct radeon_device *rdev)
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB1_WPTR, 0);
+ rdev->cp1.wptr = 0;
+ WREG32(CP_RB1_WPTR, rdev->cp1.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1232,7 +1201,6 @@ int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_RB1_BASE, rdev->cp1.gpu_addr >> 8);
rdev->cp1.rptr = RREG32(CP_RB1_RPTR);
- rdev->cp1.wptr = RREG32(CP_RB1_WPTR);
/* ring2 - compute only */
/* Set ring buffer size */
@@ -1245,7 +1213,8 @@ int cayman_cp_resume(struct radeon_device *rdev)
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA);
- WREG32(CP_RB2_WPTR, 0);
+ rdev->cp2.wptr = 0;
+ WREG32(CP_RB2_WPTR, rdev->cp2.wptr);
/* set the wb address wether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1257,7 +1226,6 @@ int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_RB2_BASE, rdev->cp2.gpu_addr >> 8);
rdev->cp2.rptr = RREG32(CP_RB2_RPTR);
- rdev->cp2.wptr = RREG32(CP_RB2_WPTR);
/* start the rings */
cayman_cp_start(rdev);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index f2204cb1ccd..7fcdbbbf297 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -721,11 +721,11 @@ void r100_fence_ring_emit(struct radeon_device *rdev,
int r100_copy_blit(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence)
{
uint32_t cur_pages;
- uint32_t stride_bytes = PAGE_SIZE;
+ uint32_t stride_bytes = RADEON_GPU_PAGE_SIZE;
uint32_t pitch;
uint32_t stride_pixels;
unsigned ndw;
@@ -737,7 +737,7 @@ int r100_copy_blit(struct radeon_device *rdev,
/* radeon pitch is /64 */
pitch = stride_bytes / 64;
stride_pixels = stride_bytes / 4;
- num_loops = DIV_ROUND_UP(num_pages, 8191);
+ num_loops = DIV_ROUND_UP(num_gpu_pages, 8191);
/* Ask for enough room for blit + flush + fence */
ndw = 64 + (10 * num_loops);
@@ -746,12 +746,12 @@ int r100_copy_blit(struct radeon_device *rdev,
DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw);
return -EINVAL;
}
- while (num_pages > 0) {
- cur_pages = num_pages;
+ while (num_gpu_pages > 0) {
+ cur_pages = num_gpu_pages;
if (cur_pages > 8191) {
cur_pages = 8191;
}
- num_pages -= cur_pages;
+ num_gpu_pages -= cur_pages;
/* pages are in Y direction - height
page width in X direction - width */
@@ -773,8 +773,8 @@ int r100_copy_blit(struct radeon_device *rdev,
radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
- radeon_ring_write(rdev, num_pages);
- radeon_ring_write(rdev, num_pages);
+ radeon_ring_write(rdev, num_gpu_pages);
+ radeon_ring_write(rdev, num_gpu_pages);
radeon_ring_write(rdev, cur_pages | (stride_pixels << 16));
}
radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0));
@@ -990,7 +990,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
/* Force read & write ptr to 0 */
WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA | RADEON_RB_NO_UPDATE);
WREG32(RADEON_CP_RB_RPTR_WR, 0);
- WREG32(RADEON_CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address whether it's enabled or not */
WREG32(R_00070C_CP_RB_RPTR_ADDR,
@@ -1007,9 +1008,6 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size)
WREG32(RADEON_CP_RB_CNTL, tmp);
udelay(10);
rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
- rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
- /* protect against crazy HW on resume */
- rdev->cp.wptr &= rdev->cp.ptr_mask;
/* Set cp mode to bus mastering & enable cp*/
WREG32(RADEON_CP_CSQ_MODE,
REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index f2405830041..a1f3ba063c2 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -84,7 +84,7 @@ static int r200_get_vtx_size_0(uint32_t vtx_fmt_0)
int r200_copy_dma(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence)
{
uint32_t size;
@@ -93,7 +93,7 @@ int r200_copy_dma(struct radeon_device *rdev,
int r = 0;
/* radeon pitch is /64 */
- size = num_pages << PAGE_SHIFT;
+ size = num_gpu_pages << RADEON_GPU_PAGE_SHIFT;
num_loops = DIV_ROUND_UP(size, 0x1FFFFF);
r = radeon_ring_lock(rdev, num_loops * 4 + 64);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index aa5571b73aa..720dd99163f 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2209,7 +2209,8 @@ int r600_cp_resume(struct radeon_device *rdev)
/* Initialize the ring buffer's read and write pointers */
WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
WREG32(CP_RB_RPTR_WR, 0);
- WREG32(CP_RB_WPTR, 0);
+ rdev->cp.wptr = 0;
+ WREG32(CP_RB_WPTR, rdev->cp.wptr);
/* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
@@ -2231,7 +2232,6 @@ int r600_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
rdev->cp.rptr = RREG32(CP_RB_RPTR);
- rdev->cp.wptr = RREG32(CP_RB_WPTR);
r600_cp_start(rdev);
rdev->cp.ready = true;
@@ -2353,21 +2353,23 @@ void r600_fence_ring_emit(struct radeon_device *rdev,
}
int r600_copy_blit(struct radeon_device *rdev,
- uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence)
+ uint64_t src_offset,
+ uint64_t dst_offset,
+ unsigned num_gpu_pages,
+ struct radeon_fence *fence)
{
int r;
mutex_lock(&rdev->r600_blit.mutex);
rdev->r600_blit.vb_ib = NULL;
- r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
if (r) {
if (rdev->r600_blit.vb_ib)
radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
mutex_unlock(&rdev->r600_blit.mutex);
return r;
}
- r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+ r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
r600_blit_done_copy(rdev, fence);
mutex_unlock(&rdev->r600_blit.mutex);
return 0;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 32807baf55e..c1e056b35b2 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -322,6 +322,7 @@ union radeon_gart_table {
#define RADEON_GPU_PAGE_SIZE 4096
#define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1)
+#define RADEON_GPU_PAGE_SHIFT 12
struct radeon_gart {
dma_addr_t table_addr;
@@ -914,17 +915,17 @@ struct radeon_asic {
int (*copy_blit)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int (*copy_dma)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int (*copy)(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
uint32_t (*get_engine_clock)(struct radeon_device *rdev);
void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock);
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 3d7a0d7c6a9..3dedaa07aac 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -75,7 +75,7 @@ uint32_t r100_pll_rreg(struct radeon_device *rdev, uint32_t reg);
int r100_copy_blit(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
int r100_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
@@ -143,7 +143,7 @@ extern void r100_post_page_flip(struct radeon_device *rdev, int crtc);
extern int r200_copy_dma(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
- unsigned num_pages,
+ unsigned num_gpu_pages,
struct radeon_fence *fence);
void r200_set_safe_registers(struct radeon_device *rdev);
@@ -311,7 +311,7 @@ void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int r600_ring_test(struct radeon_device *rdev);
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence);
+ unsigned num_gpu_pages, struct radeon_fence *fence);
void r600_hpd_init(struct radeon_device *rdev);
void r600_hpd_fini(struct radeon_device *rdev);
bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -403,7 +403,7 @@ void evergreen_bandwidth_update(struct radeon_device *rdev);
void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int evergreen_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
- unsigned num_pages, struct radeon_fence *fence);
+ unsigned num_gpu_pages, struct radeon_fence *fence);
void evergreen_hpd_init(struct radeon_device *rdev);
void evergreen_hpd_fini(struct radeon_device *rdev);
bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index c4b8741dbf5..bce63fd329d 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -68,11 +68,11 @@ void radeon_connector_hotplug(struct drm_connector *connector)
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
int saved_dpms = connector->dpms;
- if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd) &&
- radeon_dp_needs_link_train(radeon_connector))
- drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
- else
+ /* Only turn off the display it it's physically disconnected */
+ if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+ else if (radeon_dp_needs_link_train(radeon_connector))
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
connector->dpms = saved_dpms;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 3189a7efb2e..fde25c0d65a 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -208,23 +208,25 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
int xorigin = 0, yorigin = 0;
int w = radeon_crtc->cursor_width;
- if (x < 0)
- xorigin = -x + 1;
- if (y < 0)
- yorigin = -y + 1;
- if (xorigin >= CURSOR_WIDTH)
- xorigin = CURSOR_WIDTH - 1;
- if (yorigin >= CURSOR_HEIGHT)
- yorigin = CURSOR_HEIGHT - 1;
-
if (ASIC_IS_AVIVO(rdev)) {
- int i = 0;
- struct drm_crtc *crtc_p;
-
/* avivo cursor are offset into the total surface */
x += crtc->x;
y += crtc->y;
- DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+ }
+ DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+
+ if (x < 0) {
+ xorigin = min(-x, CURSOR_WIDTH - 1);
+ x = 0;
+ }
+ if (y < 0) {
+ yorigin = min(-y, CURSOR_HEIGHT - 1);
+ y = 0;
+ }
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ int i = 0;
+ struct drm_crtc *crtc_p;
/* avivo cursor image can't end on 128 pixel boundary or
* go past the end of the frame if both crtcs are enabled
@@ -253,16 +255,12 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
radeon_lock_cursor(crtc, true);
if (ASIC_IS_DCE4(rdev)) {
- WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset,
- ((xorigin ? 0 : x) << 16) |
- (yorigin ? 0 : y));
+ WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset,
((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
} else if (ASIC_IS_AVIVO(rdev)) {
- WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset,
- ((xorigin ? 0 : x) << 16) |
- (yorigin ? 0 : y));
+ WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
WREG32(AVIVO_D1CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
WREG32(AVIVO_D1CUR_SIZE + radeon_crtc->crtc_offset,
((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
@@ -276,8 +274,8 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
| yorigin));
WREG32(RADEON_CUR_HORZ_VERT_POSN + radeon_crtc->crtc_offset,
(RADEON_CUR_LOCK
- | ((xorigin ? 0 : x) << 16)
- | (yorigin ? 0 : y)));
+ | (x << 16)
+ | y));
/* offset is from DISP(2)_BASE_ADDRESS */
WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
(yorigin * 256)));
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 6cc17fb96a5..6adb3e58aff 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -473,8 +473,8 @@ pflip_cleanup:
spin_lock_irqsave(&dev->event_lock, flags);
radeon_crtc->unpin_work = NULL;
unlock_free:
- drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
spin_unlock_irqrestore(&dev->event_lock, flags);
+ drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
radeon_fence_unref(&work->fence);
kfree(work);
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 319d85d7e75..13690f3eb4a 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1507,7 +1507,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
args.ucAction = ATOM_ENABLE;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ /* workaround for DVOOutputControl on some RS690 systems */
+ if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+ u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ WREG32(RADEON_BIOS_3_SCRATCH, reg);
+ } else
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
args.ucAction = ATOM_LCD_BLON;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 9b86fb0e412..0b5468bfaf5 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -277,7 +277,12 @@ static int radeon_move_blit(struct ttm_buffer_object *bo,
DRM_ERROR("Trying to move memory with CP turned off.\n");
return -EINVAL;
}
- r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence);
+
+ BUILD_BUG_ON((PAGE_SIZE % RADEON_GPU_PAGE_SIZE) != 0);
+
+ r = radeon_copy(rdev, old_start, new_start,
+ new_mem->num_pages * (PAGE_SIZE / RADEON_GPU_PAGE_SIZE), /* GPU pages */
+ fence);
/* FIXME: handle copy error */
r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL,
evict, no_wait_reserve, no_wait_gpu, new_mem);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 4720d000d44..b13c2eedc32 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -536,55 +536,6 @@ static u32 r700_get_tile_pipe_to_backend_map(struct radeon_device *rdev,
return backend_map;
}
-static void rv770_program_channel_remap(struct radeon_device *rdev)
-{
- u32 tcp_chan_steer, mc_shared_chremap, tmp;
- bool force_no_swizzle;
-
- switch (rdev->family) {
- case CHIP_RV770:
- case CHIP_RV730:
- force_no_swizzle = false;
- break;
- case CHIP_RV710:
- case CHIP_RV740:
- default:
- force_no_swizzle = true;
- break;
- }
-
- tmp = RREG32(MC_SHARED_CHMAP);
- switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
- case 0:
- case 1:
- default:
- /* default mapping */
- mc_shared_chremap = 0x00fac688;
- break;
- case 2:
- case 3:
- if (force_no_swizzle)
- mc_shared_chremap = 0x00fac688;
- else
- mc_shared_chremap = 0x00bbc298;
- break;
- }
-
- if (rdev->family == CHIP_RV740)
- tcp_chan_steer = 0x00ef2a60;
- else
- tcp_chan_steer = 0x00fac688;
-
- /* RV770 CE has special chremap setup */
- if (rdev->pdev->device == 0x944e) {
- tcp_chan_steer = 0x00b08b08;
- mc_shared_chremap = 0x00b08b08;
- }
-
- WREG32(TCP_CHAN_STEER, tcp_chan_steer);
- WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
static void rv770_gpu_init(struct radeon_device *rdev)
{
int i, j, num_qd_pipes;
@@ -785,8 +736,6 @@ static void rv770_gpu_init(struct radeon_device *rdev)
WREG32(DCP_TILING_CONFIG, (gb_tiling_config & 0xffff));
WREG32(HDP_TILING_CONFIG, (gb_tiling_config & 0xffff));
- rv770_program_channel_remap(rdev);
-
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_GC_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
WREG32(GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a4d38d85909..ef06194c5aa 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -394,7 +394,8 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) {
if (bo->ttm == NULL) {
- ret = ttm_bo_add_ttm(bo, false);
+ bool zero = !(old_man->flags & TTM_MEMTYPE_FLAG_FIXED);
+ ret = ttm_bo_add_ttm(bo, zero);
if (ret)
goto out_err;
}
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index a597039d075..72ca689b647 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -373,6 +373,8 @@ static int wacom_probe(struct hid_device *hdev,
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
+ __set_bit(INPUT_PROP_POINTER, input->propbit);
+
/* Basics */
input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 59d83e83da7..93238378664 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,17 +36,25 @@
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/smp.h>
+#include <linux/moduleparam.h>
#include <asm/msr.h>
#include <asm/processor.h>
#define DRVNAME "coretemp"
+/*
+ * force_tjmax only matters when TjMax can't be read from the CPU itself.
+ * When set, it replaces the driver's suboptimal heuristic.
+ */
+static int force_tjmax;
+module_param_named(tjmax, force_tjmax, int, 0444);
+MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
+
#define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */
#define NUM_REAL_CORES 16 /* Number of Real cores per cpu */
#define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */
#define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */
-#define MAX_THRESH_ATTRS 3 /* Maximum no of Threshold attrs */
-#define TOTAL_ATTRS (MAX_CORE_ATTRS + MAX_THRESH_ATTRS)
+#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
#ifdef CONFIG_SMP
@@ -69,8 +77,6 @@
* This value is passed as "id" field to rdmsr/wrmsr functions.
* @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS,
* from where the temperature values should be read.
- * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT,
- * from where the thresholds are read.
* @attr_size: Total number of pre-core attrs displayed in the sysfs.
* @is_pkg_data: If this is 1, the temp_data holds pkgtemp data.
* Otherwise, temp_data holds coretemp data.
@@ -79,13 +85,11 @@
struct temp_data {
int temp;
int ttarget;
- int tmin;
int tjmax;
unsigned long last_updated;
unsigned int cpu;
u32 cpu_core_id;
u32 status_reg;
- u32 intrpt_reg;
int attr_size;
bool is_pkg_data;
bool valid;
@@ -143,19 +147,6 @@ static ssize_t show_crit_alarm(struct device *dev,
return sprintf(buf, "%d\n", (eax >> 5) & 1);
}
-static ssize_t show_max_alarm(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- u32 eax, edx;
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct temp_data *tdata = pdata->core_data[attr->index];
-
- rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx);
-
- return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1));
-}
-
static ssize_t show_tjmax(struct device *dev,
struct device_attribute *devattr, char *buf)
{
@@ -174,83 +165,6 @@ static ssize_t show_ttarget(struct device *dev,
return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget);
}
-static ssize_t store_ttarget(struct device *dev,
- struct device_attribute *devattr,
- const char *buf, size_t count)
-{
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct temp_data *tdata = pdata->core_data[attr->index];
- u32 eax, edx;
- unsigned long val;
- int diff;
-
- if (strict_strtoul(buf, 10, &val))
- return -EINVAL;
-
- /*
- * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms
- * of milli degree celsius. Hence don't accept val > (127 * 1000)
- */
- if (val > tdata->tjmax || val > 127000)
- return -EINVAL;
-
- diff = (tdata->tjmax - val) / 1000;
-
- mutex_lock(&tdata->update_lock);
- rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
- eax = (eax & ~THERM_MASK_THRESHOLD1) |
- (diff << THERM_SHIFT_THRESHOLD1);
- wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
- tdata->ttarget = val;
- mutex_unlock(&tdata->update_lock);
-
- return count;
-}
-
-static ssize_t show_tmin(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct platform_data *pdata = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin);
-}
-
-static ssize_t store_tmin(struct device *dev,
- struct device_attribute *devattr,
- const char *buf, size_t count)
-{
- struct platform_data *pdata = dev_get_drvdata(dev);
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct temp_data *tdata = pdata->core_data[attr->index];
- u32 eax, edx;
- unsigned long val;
- int diff;
-
- if (strict_strtoul(buf, 10, &val))
- return -EINVAL;
-
- /*
- * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms
- * of milli degree celsius. Hence don't accept val > (127 * 1000)
- */
- if (val > tdata->tjmax || val > 127000)
- return -EINVAL;
-
- diff = (tdata->tjmax - val) / 1000;
-
- mutex_lock(&tdata->update_lock);
- rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
- eax = (eax & ~THERM_MASK_THRESHOLD0) |
- (diff << THERM_SHIFT_THRESHOLD0);
- wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
- tdata->tmin = val;
- mutex_unlock(&tdata->update_lock);
-
- return count;
-}
-
static ssize_t show_temp(struct device *dev,
struct device_attribute *devattr, char *buf)
{
@@ -374,7 +288,6 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
{
- /* The 100C is default for both mobile and non mobile CPUs */
int err;
u32 eax, edx;
u32 val;
@@ -385,7 +298,8 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
*/
err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (err) {
- dev_warn(dev, "Unable to read TjMax from CPU.\n");
+ if (c->x86_model > 0xe && c->x86_model != 0x1c)
+ dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
} else {
val = (eax >> 16) & 0xff;
/*
@@ -393,11 +307,17 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
* will be used
*/
if (val) {
- dev_info(dev, "TjMax is %d C.\n", val);
+ dev_dbg(dev, "TjMax is %d degrees C\n", val);
return val * 1000;
}
}
+ if (force_tjmax) {
+ dev_notice(dev, "TjMax forced to %d degrees C by user\n",
+ force_tjmax);
+ return force_tjmax * 1000;
+ }
+
/*
* An assumption is made for early CPUs and unreadable MSR.
* NOTE: the calculated value may not be correct.
@@ -414,21 +334,6 @@ static void __devinit get_ucode_rev_on_cpu(void *edx)
rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
}
-static int get_pkg_tjmax(unsigned int cpu, struct device *dev)
-{
- int err;
- u32 eax, edx, val;
-
- err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
- if (!err) {
- val = (eax >> 16) & 0xff;
- if (val)
- return val * 1000;
- }
- dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu);
- return 100000; /* Default TjMax: 100 degree celsius */
-}
-
static int create_name_attr(struct platform_data *pdata, struct device *dev)
{
sysfs_attr_init(&pdata->name_attr.attr);
@@ -442,19 +347,14 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev,
int attr_no)
{
int err, i;
- static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev,
+ static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev,
struct device_attribute *devattr, char *buf) = {
show_label, show_crit_alarm, show_temp, show_tjmax,
- show_max_alarm, show_ttarget, show_tmin };
- static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev,
- struct device_attribute *devattr, const char *buf,
- size_t count) = { NULL, NULL, NULL, NULL, NULL,
- store_ttarget, store_tmin };
- static const char *names[TOTAL_ATTRS] = {
+ show_ttarget };
+ static const char *const names[TOTAL_ATTRS] = {
"temp%d_label", "temp%d_crit_alarm",
"temp%d_input", "temp%d_crit",
- "temp%d_max_alarm", "temp%d_max",
- "temp%d_max_hyst" };
+ "temp%d_max" };
for (i = 0; i < tdata->attr_size; i++) {
snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
@@ -462,10 +362,6 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev,
sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
- if (rw_ptr[i]) {
- tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR;
- tdata->sd_attrs[i].dev_attr.store = rw_ptr[i];
- }
tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
tdata->sd_attrs[i].index = attr_no;
err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
@@ -481,9 +377,9 @@ exit_free:
}
-static int __devinit chk_ucode_version(struct platform_device *pdev)
+static int __cpuinit chk_ucode_version(unsigned int cpu)
{
- struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
int err;
u32 edx;
@@ -494,17 +390,15 @@ static int __devinit chk_ucode_version(struct platform_device *pdev)
*/
if (c->x86_model == 0xe && c->x86_mask < 0xc) {
/* check for microcode update */
- err = smp_call_function_single(pdev->id, get_ucode_rev_on_cpu,
+ err = smp_call_function_single(cpu, get_ucode_rev_on_cpu,
&edx, 1);
if (err) {
- dev_err(&pdev->dev,
- "Cannot determine microcode revision of "
- "CPU#%u (%d)!\n", pdev->id, err);
+ pr_err("Cannot determine microcode revision of "
+ "CPU#%u (%d)!\n", cpu, err);
return -ENODEV;
} else if (edx < 0x39) {
- dev_err(&pdev->dev,
- "Errata AE18 not fixed, update BIOS or "
- "microcode of the CPU!\n");
+ pr_err("Errata AE18 not fixed, update BIOS or "
+ "microcode of the CPU!\n");
return -ENODEV;
}
}
@@ -538,8 +432,6 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag)
tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS :
MSR_IA32_THERM_STATUS;
- tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT :
- MSR_IA32_THERM_INTERRUPT;
tdata->is_pkg_data = pkg_flag;
tdata->cpu = cpu;
tdata->cpu_core_id = TO_CORE_ID(cpu);
@@ -548,11 +440,11 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag)
return tdata;
}
-static int create_core_data(struct platform_data *pdata,
- struct platform_device *pdev,
+static int create_core_data(struct platform_device *pdev,
unsigned int cpu, int pkg_flag)
{
struct temp_data *tdata;
+ struct platform_data *pdata = platform_get_drvdata(pdev);
struct cpuinfo_x86 *c = &cpu_data(cpu);
u32 eax, edx;
int err, attr_no;
@@ -588,20 +480,21 @@ static int create_core_data(struct platform_data *pdata,
goto exit_free;
/* We can access status register. Get Critical Temperature */
- if (pkg_flag)
- tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev);
- else
- tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
+ tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
/*
- * Test if we can access the intrpt register. If so, increase the
- * 'size' enough to have ttarget/tmin/max_alarm interfaces.
- * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT
+ * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET.
+ * The target temperature is available on older CPUs but not in this
+ * register. Atoms don't have the register at all.
*/
- err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx);
- if (!err) {
- tdata->attr_size += MAX_THRESH_ATTRS;
- tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000;
+ if (c->x86_model > 0xe && c->x86_model != 0x1c) {
+ err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET,
+ &eax, &edx);
+ if (!err) {
+ tdata->ttarget
+ = tdata->tjmax - ((eax >> 8) & 0xff) * 1000;
+ tdata->attr_size++;
+ }
}
pdata->core_data[attr_no] = tdata;
@@ -613,22 +506,20 @@ static int create_core_data(struct platform_data *pdata,
return 0;
exit_free:
+ pdata->core_data[attr_no] = NULL;
kfree(tdata);
return err;
}
static void coretemp_add_core(unsigned int cpu, int pkg_flag)
{
- struct platform_data *pdata;
struct platform_device *pdev = coretemp_get_pdev(cpu);
int err;
if (!pdev)
return;
- pdata = platform_get_drvdata(pdev);
-
- err = create_core_data(pdata, pdev, cpu, pkg_flag);
+ err = create_core_data(pdev, cpu, pkg_flag);
if (err)
dev_err(&pdev->dev, "Adding Core %u failed\n", cpu);
}
@@ -652,11 +543,6 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
struct platform_data *pdata;
int err;
- /* Check the microcode version of the CPU */
- err = chk_ucode_version(pdev);
- if (err)
- return err;
-
/* Initialize the per-package data structures */
pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL);
if (!pdata)
@@ -666,7 +552,7 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
if (err)
goto exit_free;
- pdata->phys_proc_id = TO_PHYS_ID(pdev->id);
+ pdata->phys_proc_id = pdev->id;
platform_set_drvdata(pdev, pdata);
pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -718,7 +604,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
mutex_lock(&pdev_list_mutex);
- pdev = platform_device_alloc(DRVNAME, cpu);
+ pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu));
if (!pdev) {
err = -ENOMEM;
pr_err("Device allocation failed\n");
@@ -738,7 +624,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
}
pdev_entry->pdev = pdev;
- pdev_entry->phys_proc_id = TO_PHYS_ID(cpu);
+ pdev_entry->phys_proc_id = pdev->id;
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
@@ -799,6 +685,10 @@ static void __cpuinit get_core_online(unsigned int cpu)
return;
if (!pdev) {
+ /* Check the microcode version of the CPU */
+ if (chk_ucode_version(cpu))
+ return;
+
/*
* Alright, we have DTS support.
* We are bringing the _first_ core in this pkg
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 257957c69d9..4f7c3fc40a8 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -72,7 +72,7 @@ struct ds620_data {
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u16 temp[3]; /* Register values, word */
+ s16 temp[3]; /* Register values, word */
};
/*
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index a561c3a0e91..397fc59b568 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -978,6 +978,8 @@ static void pmbus_find_max_attr(struct i2c_client *client,
struct pmbus_limit_attr {
u16 reg; /* Limit register */
bool update; /* True if register needs updates */
+ bool low; /* True if low limit; for limits with compare
+ functions only */
const char *attr; /* Attribute name */
const char *alarm; /* Alarm attribute name */
u32 sbit; /* Alarm attribute status bit */
@@ -1029,7 +1031,8 @@ static bool pmbus_add_limit_attrs(struct i2c_client *client,
if (attr->compare) {
pmbus_add_boolean_cmp(data, name,
l->alarm, index,
- cbase, cindex,
+ l->low ? cindex : cbase,
+ l->low ? cbase : cindex,
attr->sbase + page, l->sbit);
} else {
pmbus_add_boolean_reg(data, name,
@@ -1366,11 +1369,13 @@ static const struct pmbus_sensor_attr power_attributes[] = {
static const struct pmbus_limit_attr temp_limit_attrs[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
@@ -1399,11 +1404,13 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = {
static const struct pmbus_limit_attr temp_limit_attrs23[] = {
{
.reg = PMBUS_UT_WARN_LIMIT,
+ .low = true,
.attr = "min",
.alarm = "min_alarm",
.sbit = PB_TEMP_UT_WARNING,
}, {
.reg = PMBUS_UT_FAULT_LIMIT,
+ .low = true,
.attr = "lcrit",
.alarm = "lcrit_alarm",
.sbit = PB_TEMP_UT_FAULT,
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 17cf1ab9552..8c2844e5691 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -329,8 +329,8 @@ static int w83791d_detect(struct i2c_client *client,
struct i2c_board_info *info);
static int w83791d_remove(struct i2c_client *client);
-static int w83791d_read(struct i2c_client *client, u8 register);
-static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
+static int w83791d_read(struct i2c_client *client, u8 reg);
+static int w83791d_write(struct i2c_client *client, u8 reg, u8 value);
static struct w83791d_data *w83791d_update_device(struct device *dev);
#ifdef DEBUG
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5d8aed5ec21..c01e9519f6c 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -35,7 +35,7 @@
#include <linux/slab.h>
#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
static inline int ixp2000_scl_pin(void *data)
{
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 000a78e5246..6dede8f366c 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -28,7 +28,7 @@
#include <linux/platform_device.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/at91sam9_smc.h>
#define DRV_NAME "at91_ide"
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 274798068a5..16f69be820c 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -435,7 +435,12 @@ static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
if (!(rq->cmd_flags & REQ_FLUSH))
return BLKPREP_OK;
- cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ if (rq->special) {
+ cmd = rq->special;
+ memset(cmd, 0, sizeof(*cmd));
+ } else {
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ }
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(cmd == NULL);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 17bf9d95463..6cd642aaa4d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -287,7 +287,7 @@ void __free_ep(struct kref *kref)
if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
dst_release(ep->dst);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
}
kfree(ep);
}
@@ -1178,7 +1178,7 @@ static int act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
release_tid(ep->com.tdev, GET_TID(rpl), NULL);
cxgb3_free_atid(ep->com.tdev, ep->atid);
dst_release(ep->dst);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
put_ep(&ep->com);
return CPL_RET_BUF_DONE;
}
@@ -1377,7 +1377,7 @@ static int pass_accept_req(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
if (!child_ep) {
printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n",
__func__);
- l2t_release(L2DATA(tdev), l2t);
+ l2t_release(tdev, l2t);
dst_release(dst);
goto reject;
}
@@ -1956,7 +1956,7 @@ int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
if (!err)
goto out;
- l2t_release(L2DATA(h->rdev.t3cdev_p), ep->l2t);
+ l2t_release(h->rdev.t3cdev_p, ep->l2t);
fail4:
dst_release(ep->dst);
fail3:
@@ -2127,7 +2127,7 @@ int iwch_ep_redirect(void *ctx, struct dst_entry *old, struct dst_entry *new,
PDBG("%s ep %p redirect to dst %p l2t %p\n", __func__, ep, new,
l2t);
dst_hold(new);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ l2t_release(ep->com.tdev, ep->l2t);
ep->l2t = l2t;
dst_release(old);
ep->dst = new;
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 7b404e5443e..e34eeb8ae37 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -668,4 +668,3 @@ module_exit(adp5588_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
-MODULE_ALIAS("platform:adp5588-keys");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 33d0bdc837c..323bcdfff24 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,7 +35,7 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <asm/irq.h>
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index b09c7d12721..ab860511f01 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -475,7 +475,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
le16_to_cpu(dev->ctl_req->wIndex),
dev->ctl_data,
USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
- if (error && error != EINTR)
+ if (error < 0 && error != -EINTR)
err("%s: usb_control_msg() failed %d", __func__, error);
}
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index da280189ef0..5ec617e28f7 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -67,6 +67,10 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+/* MacbookAir4,1 (unibody, July 2011) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
/* MacbookAir4,2 (unibody, July 2011) */
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
@@ -112,6 +116,10 @@ static const struct usb_device_id bcm5974_table[] = {
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
+ /* MacbookAir4,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
/* MacbookAir4,2 */
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO),
@@ -334,6 +342,18 @@ static const struct bcm5974_config bcm5974_config_table[] = {
{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
{}
};
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d27c9d91630..958b4eb6369 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -229,13 +229,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
get_unaligned_le16(&report[i + 3]);
i += 4;
}
- } else if (usage == WCM_DIGITIZER) {
- /* max pressure isn't reported
- features->pressure_max = (unsigned short)
- (report[i+4] << 8 | report[i + 3]);
- */
- features->pressure_max = 255;
- i += 4;
}
break;
@@ -291,13 +284,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
pen = 1;
i++;
break;
-
- case HID_USAGE_UNDEFINED:
- if (usage == WCM_DESKTOP && finger) /* capacity */
- features->pressure_max =
- get_unaligned_le16(&report[i + 3]);
- i += 4;
- break;
}
break;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index c1c2f7b28d8..0dc97ec15c2 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -800,25 +800,26 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
int i;
for (i = 0; i < 2; i++) {
- int p = data[9 * i + 2];
- bool touch = p && !wacom->shared->stylus_in_proximity;
+ int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
+ bool touch = data[offset + 3] & 0x80;
- input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
/*
* Touch events need to be disabled while stylus is
* in proximity because user's hand is resting on touchpad
* and sending unwanted events. User expects tablet buttons
* to continue working though.
*/
+ touch = touch && !wacom->shared->stylus_in_proximity;
+
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
- int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
- int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
+ int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
+ int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
x <<= 5;
y <<= 5;
}
- input_report_abs(input, ABS_MT_PRESSURE, p);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
@@ -1056,10 +1057,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
features->y_fuzz, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
- features->pressure_fuzz, 0);
if (features->device_type == BTN_TOOL_PEN) {
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
+ features->pressure_fuzz, 0);
+
/* penabled devices have fixed resolution for each model */
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
@@ -1098,6 +1100,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case WACOM_21UX2:
@@ -1126,6 +1130,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
}
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
wacom_setup_cintiq(wacom_wac);
break;
@@ -1150,6 +1157,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
/* fall through */
case INTUOS:
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
wacom_setup_intuos(wacom_wac);
break;
@@ -1165,6 +1174,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
wacom_setup_intuos(wacom_wac);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case TABLETPC2FG:
@@ -1183,26 +1194,40 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
case TABLETPC:
__clear_bit(ABS_MISC, input_dev->absbit);
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
if (features->device_type != BTN_TOOL_PEN)
break; /* no need to process stylus stuff */
/* fall through */
case PL:
- case PTU:
case DTU:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+ __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+ break;
+
+ case PTU:
+ __set_bit(BTN_STYLUS2, input_dev->keybit);
/* fall through */
case PENPARTNER:
+ __set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+ __set_bit(BTN_STYLUS, input_dev->keybit);
+
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
case BAMBOO_PT:
__clear_bit(ABS_MISC, input_dev->absbit);
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
if (features->device_type == BTN_TOOL_DOUBLETAP) {
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index c14412ef464..9941d39df43 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -383,6 +383,8 @@ static int w8001_setup(struct w8001 *w8001)
dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+ __set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
/* penabled? */
error = w8001_command(w8001, W8001_CMD_QUERY, true);
if (!error) {
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 3dc9befa5ae..6dcc7e2d54d 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1388,7 +1388,7 @@ int dmar_set_interrupt(struct intel_iommu *iommu)
return ret;
}
- ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu);
+ ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
if (ret)
printk(KERN_ERR "IOMMU: can't request irq\n");
return ret;
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index d87c9d02f78..328c64c0841 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -41,6 +41,7 @@ static ssize_t led_delay_on_store(struct device *dev,
if (count == size) {
led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+ led_cdev->blink_delay_on = state;
ret = count;
}
@@ -69,6 +70,7 @@ static ssize_t led_delay_off_store(struct device *dev,
if (count == size) {
led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+ led_cdev->blink_delay_off = state;
ret = count;
}
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index b5ef3622244..b3a5ecdb33a 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -2194,19 +2194,6 @@ static int __init omap_vout_probe(struct platform_device *pdev)
"'%s' Display already enabled\n",
def_display->name);
}
- /* set the update mode */
- if (def_display->caps &
- OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
- if (dssdrv->enable_te)
- dssdrv->enable_te(def_display, 0);
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_MANUAL);
- } else {
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_AUTO);
- }
}
}
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 9d3459de04b..80796eb0c53 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -31,6 +31,7 @@
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <media/v4l2-event.h>
#include "isp.h"
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index d29f9c2d085..e4100b1f68d 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1961,7 +1961,7 @@ static int __uvc_resume(struct usb_interface *intf, int reset)
list_for_each_entry(stream, &dev->streams, list) {
if (stream->intf == intf)
- return uvc_video_resume(stream);
+ return uvc_video_resume(stream, reset);
}
uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c
index 48fea373c25..29e239911d0 100644
--- a/drivers/media/video/uvc/uvc_entity.c
+++ b/drivers/media/video/uvc/uvc_entity.c
@@ -49,7 +49,7 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain,
if (remote == NULL)
return -EINVAL;
- source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+ source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
? (remote->vdev ? &remote->vdev->entity : NULL)
: &remote->subdev.entity;
if (source == NULL)
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 8244167c891..ffd1158628b 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1104,10 +1104,18 @@ int uvc_video_suspend(struct uvc_streaming *stream)
* buffers, making sure userspace applications are notified of the problem
* instead of waiting forever.
*/
-int uvc_video_resume(struct uvc_streaming *stream)
+int uvc_video_resume(struct uvc_streaming *stream, int reset)
{
int ret;
+ /* If the bus has been reset on resume, set the alternate setting to 0.
+ * This should be the default value, but some devices crash or otherwise
+ * misbehave if they don't receive a SET_INTERFACE request before any
+ * other video control request.
+ */
+ if (reset)
+ usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+
stream->frozen = 0;
ret = uvc_commit_video(stream, &stream->ctrl);
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index df32a43ca86..cbdd49bf8b6 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -638,7 +638,7 @@ extern void uvc_mc_cleanup_entity(struct uvc_entity *entity);
/* Video */
extern int uvc_video_init(struct uvc_streaming *stream);
extern int uvc_video_suspend(struct uvc_streaming *stream);
-extern int uvc_video_resume(struct uvc_streaming *stream);
+extern int uvc_video_resume(struct uvc_streaming *stream, int reset);
extern int uvc_video_enable(struct uvc_streaming *stream, int enable);
extern int uvc_probe_video(struct uvc_streaming *stream,
struct uvc_streaming_control *probe);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 06f14008b34..d7215651772 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -173,6 +173,17 @@ static void v4l2_device_release(struct device *cd)
media_device_unregister_entity(&vdev->entity);
#endif
+ /* Do not call v4l2_device_put if there is no release callback set.
+ * Drivers that have no v4l2_device release callback might free the
+ * v4l2_dev instance in the video_device release callback below, so we
+ * must perform this check here.
+ *
+ * TODO: In the long run all drivers that use v4l2_device should use the
+ * v4l2_device release callback. This check will then be unnecessary.
+ */
+ if (v4l2_dev->release == NULL)
+ v4l2_dev = NULL;
+
/* Release video_device and perform other
cleanups as needed. */
vdev->release(vdev);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index c72856c4143..e6a2c3b302d 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -38,6 +38,7 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
mutex_init(&v4l2_dev->ioctl_lock);
v4l2_prio_init(&v4l2_dev->prio);
kref_init(&v4l2_dev->ref);
+ get_device(dev);
v4l2_dev->dev = dev;
if (dev == NULL) {
/* If dev == NULL, then name must be filled in by the caller */
@@ -93,6 +94,7 @@ void v4l2_device_disconnect(struct v4l2_device *v4l2_dev)
if (dev_get_drvdata(v4l2_dev->dev) == v4l2_dev)
dev_set_drvdata(v4l2_dev->dev, NULL);
+ put_device(v4l2_dev->dev);
v4l2_dev->dev = NULL;
}
EXPORT_SYMBOL_GPL(v4l2_device_disconnect);
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 21131c7b0f1..563654c9b19 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -273,7 +273,7 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev)
ct->regs.ack = JZ_REG_ADC_STATUS;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(5), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 5d1fca0277e..f83103b8970 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -135,10 +135,13 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
max8997->dev = &i2c->dev;
max8997->i2c = i2c;
max8997->type = id->driver_data;
+ max8997->irq = i2c->irq;
if (!pdata)
goto err;
+ max8997->irq_base = pdata->irq_base;
+ max8997->ono = pdata->ono;
max8997->wakeup = pdata->wakeup;
mutex_init(&max8997->iolock);
@@ -152,6 +155,8 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
pm_runtime_set_active(max8997->dev);
+ max8997_irq_init(max8997);
+
mfd_add_devices(max8997->dev, -1, max8997_devs,
ARRAY_SIZE(max8997_devs),
NULL, 0);
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7f0bc..af5d9d06137 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
#include <asm/mach/irq.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 29601e7d606..86e14583a08 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -17,6 +17,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
@@ -676,7 +677,6 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
- reg |= (1 << (i + 1));
} else
continue;
diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c
index 2bfad5c86cc..a56be931551 100644
--- a/drivers/mfd/tps65910-irq.c
+++ b/drivers/mfd/tps65910-irq.c
@@ -178,8 +178,10 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq,
switch (tps65910_chip_id(tps65910)) {
case TPS65910:
tps65910->irq_num = TPS65910_NUM_IRQ;
+ break;
case TPS65911:
tps65910->irq_num = TPS65911_NUM_IRQ;
+ break;
}
/* Register with genirq */
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index b5d598c3aa7..7cbf2aa9e64 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -510,8 +510,9 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
u8 ch_msb, ch_lsb;
int ret;
- if (!req)
+ if (!req || !twl4030_madc)
return -EINVAL;
+
mutex_lock(&twl4030_madc->lock);
if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
ret = -EINVAL;
@@ -706,6 +707,8 @@ static int __devinit twl4030_madc_probe(struct platform_device *pdev)
if (!madc)
return -ENOMEM;
+ madc->dev = &pdev->dev;
+
/*
* Phoenix provides 2 interrupt lines. The first one is connected to
* the OMAP. The other one can be connected to the other processor such
diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c
index ebf99bef392..d584f6b4d6e 100644
--- a/drivers/mfd/wm8350-gpio.c
+++ b/drivers/mfd/wm8350-gpio.c
@@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir)
return ret;
}
-static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
+static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
{
if (db == WM8350_GPIO_DEBOUNCE_ON)
return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
@@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
goto err;
if (gpio_set_polarity(wm8350, gpio, pol))
goto err;
- if (gpio_set_debounce(wm8350, gpio, debounce))
+ if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
goto err;
if (gpio_set_dir(wm8350, gpio, dir))
goto err;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index b928bc14e97..8b51cd62d06 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -375,12 +375,14 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
* both have been read. So the value read will always be correct.
* Set BOOT bit to refresh factory tuning values.
*/
- lis3->read(lis3, CTRL_REG2, &reg);
- if (lis3->whoami == WAI_12B)
- reg |= CTRL2_BDU | CTRL2_BOOT;
- else
- reg |= CTRL2_BOOT_8B;
- lis3->write(lis3, CTRL_REG2, reg);
+ if (lis3->pdata) {
+ lis3->read(lis3, CTRL_REG2, &reg);
+ if (lis3->whoami == WAI_12B)
+ reg |= CTRL2_BDU | CTRL2_BOOT;
+ else
+ reg |= CTRL2_BOOT_8B;
+ lis3->write(lis3, CTRL_REG2, reg);
+ }
/* LIS3 power on delay is quite long */
msleep(lis3->pwron_delay / lis3lv02d_get_odr());
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 06df1877ad0..0b56e3f4357 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -165,6 +165,11 @@ static void pti_write_to_aperture(struct pti_masterchannel *mc,
static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc,
const char *thread_name)
{
+ /*
+ * Since we access the comm member in current's task_struct, we only
+ * need to be as large as what 'comm' in that structure is.
+ */
+ char comm[TASK_COMM_LEN];
struct pti_masterchannel mccontrol = {.master = CONTROL_ID,
.channel = 0};
const char *thread_name_p;
@@ -172,13 +177,6 @@ static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc,
u8 control_frame[CONTROL_FRAME_LEN];
if (!thread_name) {
- /*
- * Since we access the comm member in current's task_struct,
- * we only need to be as large as what 'comm' in that
- * structure is.
- */
- char comm[TASK_COMM_LEN];
-
if (!in_interrupt())
get_task_comm(comm, current);
else
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1ff5486213f..4c1a648d00f 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -926,6 +926,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
/*
* Reliable writes are used to implement Forced Unit Access and
* REQ_META accesses, and are supported only on MMCs.
+ *
+ * XXX: this really needs a good explanation of why REQ_META
+ * is treated special.
*/
bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
(req->cmd_flags & REQ_META)) &&
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a6c32904014..2dba999caf2 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,7 @@
#include <plat/board.h>
#include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
#include <plat/mux.h>
#include <plat/fpga.h>
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 18b0bd31de7..21b00cefae6 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -21,7 +21,9 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78017eb9318..9e6b498c9be 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/board-ams-delta.h>
/*
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index a916dec2921..6a1d6d9a2df 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -40,7 +40,7 @@
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/dma.h>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8d0314dbd94..a44874e24f2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2535,7 +2535,7 @@ config S6GMAC
source "drivers/net/stmmac/Kconfig"
config PCH_GBE
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
+ tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI
select MII
---help---
@@ -2548,10 +2548,11 @@ config PCH_GBE
This driver enables Gigabit Ethernet function.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7223.
- ML7223 IOH is for MP(Media Phone) use.
- ML7223 is companion chip for Intel Atom E6xx series.
- ML7223 is completely compatible for Intel EG20T PCH.
+ Output Hub), ML7223/ML7831.
+ ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general
+ purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config FTGMAC100
tristate "Faraday FTGMAC100 Gigabit Ethernet support"
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 29dc43523ce..48b4ec121f7 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -35,7 +35,7 @@
#include <asm/mach-types.h>
#include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index c423504a755..e46df5331c5 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -315,6 +315,14 @@ union db_prod {
u32 raw;
};
+/* dropless fc FW/HW related params */
+#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512)
+#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \
+ ETH_MAX_AGGREGATION_QUEUES_E1 :\
+ ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
+#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
+#define FW_PREFETCH_CNT 16
+#define DROPLESS_FC_HEADROOM 100
/* MC hsi */
#define BCM_PAGE_SHIFT 12
@@ -331,15 +339,35 @@ union db_prod {
/* SGE ring related macros */
#define NUM_RX_SGE_PAGES 2
#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
-#define MAX_RX_SGE_CNT (RX_SGE_CNT - 2)
+#define NEXT_PAGE_SGE_DESC_CNT 2
+#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
/* RX_SGE_CNT is promised to be a power of 2 */
#define RX_SGE_MASK (RX_SGE_CNT - 1)
#define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES)
#define MAX_RX_SGE (NUM_RX_SGE - 1)
#define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \
- (MAX_RX_SGE_CNT - 1)) ? (x) + 3 : (x) + 1)
+ (MAX_RX_SGE_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
+ (x) + 1)
#define RX_SGE(x) ((x) & MAX_RX_SGE)
+/*
+ * Number of required SGEs is the sum of two:
+ * 1. Number of possible opened aggregations (next packet for
+ * these aggregations will probably consume SGE immidiatelly)
+ * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
+ * after placement on BD for new TPA aggregation)
+ *
+ * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
+ */
+#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \
+ (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
+#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
+ MAX_RX_SGE_CNT)
+#define SGE_TH_LO(bp) (NUM_SGE_REQ + \
+ NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
+#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
/* Manipulate a bit vector defined as an array of u64 */
/* Number of bits in one sge_mask array element */
@@ -551,24 +579,43 @@ struct bnx2x_fastpath {
#define NUM_TX_RINGS 16
#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
-#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1)
+#define NEXT_PAGE_TX_DESC_CNT 1
+#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
#define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS)
#define MAX_TX_BD (NUM_TX_BD - 1)
#define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
#define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \
- (MAX_TX_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+ (MAX_TX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
+ (x) + 1)
#define TX_BD(x) ((x) & MAX_TX_BD)
#define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT)
/* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
#define NUM_RX_RINGS 8
#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
-#define MAX_RX_DESC_CNT (RX_DESC_CNT - 2)
+#define NEXT_PAGE_RX_DESC_CNT 2
+#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
#define RX_DESC_MASK (RX_DESC_CNT - 1)
#define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS)
#define MAX_RX_BD (NUM_RX_BD - 1)
#define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
-#define MIN_RX_AVAIL 128
+
+/* dropless fc calculations for BDs
+ *
+ * Number of BDs should as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_BD_REQ BRB_SIZE(bp)
+#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
+ MAX_RX_DESC_CNT)
+#define BD_TH_LO(bp) (NUM_BD_REQ + \
+ NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)
#define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \
ETH_MIN_RX_CQES_WITH_TPA_E1 : \
@@ -579,7 +626,9 @@ struct bnx2x_fastpath {
MIN_RX_AVAIL))
#define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \
- (MAX_RX_DESC_CNT - 1)) ? (x) + 3 : (x) + 1)
+ (MAX_RX_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
+ (x) + 1)
#define RX_BD(x) ((x) & MAX_RX_BD)
/*
@@ -589,14 +638,31 @@ struct bnx2x_fastpath {
#define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
#define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL)
#define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
-#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - 1)
+#define NEXT_PAGE_RCQ_DESC_CNT 1
+#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
#define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS)
#define MAX_RCQ_BD (NUM_RCQ_BD - 1)
#define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
#define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \
- (MAX_RCQ_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+ (MAX_RCQ_DESC_CNT - 1)) ? \
+ (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
+ (x) + 1)
#define RCQ_BD(x) ((x) & MAX_RCQ_BD)
+/* dropless fc calculations for RCQs
+ *
+ * Number of RCQs should be as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_RCQ_REQ BRB_SIZE(bp)
+#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
+ MAX_RCQ_DESC_CNT)
+#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \
+ NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
+ FW_DROP_LEVEL(bp))
+#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
/* This is needed for determining of last_max */
#define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b))
@@ -685,24 +751,17 @@ struct bnx2x_fastpath {
#define FP_CSB_FUNC_OFF \
offsetof(struct cstorm_status_block_c, func)
-#define HC_INDEX_TOE_RX_CQ_CONS 0 /* Formerly Ustorm TOE CQ index */
- /* (HC_INDEX_U_TOE_RX_CQ_CONS) */
-#define HC_INDEX_ETH_RX_CQ_CONS 1 /* Formerly Ustorm ETH CQ index */
- /* (HC_INDEX_U_ETH_RX_CQ_CONS) */
-#define HC_INDEX_ETH_RX_BD_CONS 2 /* Formerly Ustorm ETH BD index */
- /* (HC_INDEX_U_ETH_RX_BD_CONS) */
-
-#define HC_INDEX_TOE_TX_CQ_CONS 4 /* Formerly Cstorm TOE CQ index */
- /* (HC_INDEX_C_TOE_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 /* Formerly Cstorm ETH CQ index */
- /* (HC_INDEX_C_ETH_TX_CQ_CONS) */
+#define HC_INDEX_ETH_RX_CQ_CONS 1
-#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0
+#define HC_INDEX_OOO_TX_CQ_CONS 4
+#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7
+
+#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0
#define BNX2X_RX_SB_INDEX \
(&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])
@@ -1100,11 +1159,12 @@ struct bnx2x {
#define BP_PORT(bp) (bp->pfid & 1)
#define BP_FUNC(bp) (bp->pfid)
#define BP_ABS_FUNC(bp) (bp->pf_num)
-#define BP_E1HVN(bp) (bp->pfid >> 1)
-#define BP_VN(bp) (BP_E1HVN(bp)) /*remove when approved*/
-#define BP_L_ID(bp) (BP_E1HVN(bp) << 2)
-#define BP_FW_MB_IDX(bp) (BP_PORT(bp) +\
- BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_VN(bp) ((bp)->pfid >> 1)
+#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
+#define BP_L_ID(bp) (BP_VN(bp) << 2)
+#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\
+ (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
+#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp))
struct net_device *dev;
struct pci_dev *pdev;
@@ -1767,7 +1827,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
#define MAX_DMAE_C_PER_PORT 8
#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
- BP_E1HVN(bp))
+ BP_VN(bp))
#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
@@ -1793,7 +1853,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
/* must be used on a CID before placing it on a HW ring */
#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \
- (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \
+ (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
(x))
#define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe))
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 37e5790681a..c4cbf973641 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -987,8 +987,6 @@ void __bnx2x_link_report(struct bnx2x *bp)
void bnx2x_init_rx_rings(struct bnx2x *bp)
{
int func = BP_FUNC(bp);
- int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
u16 ring_prod;
int i, j;
@@ -1001,7 +999,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
if (!fp->disable_tpa) {
/* Fill the per-aggregtion pool */
- for (i = 0; i < max_agg_queues; i++) {
+ for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
&fp->tpa_info[i];
struct sw_rx_bd *first_buf =
@@ -1041,7 +1039,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
bnx2x_free_rx_sge_range(bp, fp,
ring_prod);
bnx2x_free_tpa_pool(bp, fp,
- max_agg_queues);
+ MAX_AGG_QS(bp));
fp->disable_tpa = 1;
ring_prod = 0;
break;
@@ -1137,9 +1135,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
bnx2x_free_rx_bds(fp);
if (!fp->disable_tpa)
- bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
- ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+ bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
}
}
@@ -3095,15 +3091,20 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
struct bnx2x_fastpath *fp = &bp->fp[index];
int ring_size = 0;
u8 cos;
+ int rx_ring_size = 0;
/* if rx_ring_size specified - use it */
- int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
- MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+ if (!bp->rx_ring_size) {
- /* allocate at least number of buffers required by FW */
- rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
- MIN_RX_SIZE_TPA,
- rx_ring_size);
+ rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+
+ /* allocate at least number of buffers required by FW */
+ rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+ MIN_RX_SIZE_TPA, rx_ring_size);
+
+ bp->rx_ring_size = rx_ring_size;
+ } else
+ rx_ring_size = bp->rx_ring_size;
/* Common */
sb = &bnx2x_fp(bp, index, status_blk);
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index a1e004a82f7..0b4acf67e0c 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -2120,6 +2120,7 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap)
break;
case DCB_CAP_ATTR_DCBX:
*cap = BNX2X_DCBX_CAPS;
+ break;
default:
rval = -EINVAL;
break;
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 221863059da..cf3e47914dd 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -363,13 +363,50 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
/* advertise the requested speed and duplex if supported */
- cmd->advertising &= bp->port.supported[cfg_idx];
+ if (cmd->advertising & ~(bp->port.supported[cfg_idx])) {
+ DP(NETIF_MSG_LINK, "Advertisement parameters "
+ "are not supported\n");
+ return -EINVAL;
+ }
bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
- bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL;
- bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg |
+ bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
+ bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg |
cmd->advertising);
+ if (cmd->advertising) {
+
+ bp->link_params.speed_cap_mask[cfg_idx] = 0;
+ if (cmd->advertising & ADVERTISED_10baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF;
+ }
+ if (cmd->advertising & ADVERTISED_10baseT_Full)
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL;
+ if (cmd->advertising & ADVERTISED_100baseT_Full)
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL;
+
+ if (cmd->advertising & ADVERTISED_100baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF;
+ }
+ if (cmd->advertising & ADVERTISED_1000baseT_Half) {
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+ }
+ if (cmd->advertising & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseKX_Full))
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+
+ if (cmd->advertising & (ADVERTISED_10000baseT_Full |
+ ADVERTISED_10000baseKX4_Full |
+ ADVERTISED_10000baseKR_Full))
+ bp->link_params.speed_cap_mask[cfg_idx] |=
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+ }
} else { /* forced speed */
/* advertise the requested speed and duplex if supported */
switch (speed) {
@@ -1310,10 +1347,7 @@ static void bnx2x_get_ringparam(struct net_device *dev,
if (bp->rx_ring_size)
ering->rx_pending = bp->rx_ring_size;
else
- if (bp->state == BNX2X_STATE_OPEN && bp->num_queues)
- ering->rx_pending = MAX_RX_AVAIL/bp->num_queues;
- else
- ering->rx_pending = MAX_RX_AVAIL;
+ ering->rx_pending = MAX_RX_AVAIL;
ering->rx_mini_pending = 0;
ering->rx_jumbo_pending = 0;
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index d45b1555a60..ba15bdc5a1a 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -778,9 +778,9 @@ static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp,
{
u32 nig_reg_adress_crd_weight = 0;
u32 pbf_reg_adress_crd_weight = 0;
- /* Calculate and set BW for this COS*/
- const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw;
- const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw;
+ /* Calculate and set BW for this COS - use 1 instead of 0 for BW */
+ const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw;
+ const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw;
switch (cos_entry) {
case 0:
@@ -852,18 +852,12 @@ static int bnx2x_ets_e3b0_get_total_bw(
/* Calculate total BW requested */
for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) {
if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
-
- if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
- DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
- "was set to 0\n");
- return -EINVAL;
+ *total_bw +=
+ ets_params->cos[cos_idx].params.bw_params.bw;
}
- *total_bw +=
- ets_params->cos[cos_idx].params.bw_params.bw;
- }
}
- /*Check taotl BW is valid */
+ /* Check total BW is valid */
if ((100 != *total_bw) || (0 == *total_bw)) {
if (0 == *total_bw) {
DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
@@ -1726,7 +1720,7 @@ static int bnx2x_xmac_enable(struct link_params *params,
/* Check loopback mode */
if (lb)
- val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK;
+ val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
REG_WR(bp, xmac_base + XMAC_REG_CTRL, val);
bnx2x_set_xumac_nig(params,
((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
@@ -3630,6 +3624,12 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ /* Advertised and set FEC (Forward Error Correction) */
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2,
+ (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY |
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ));
+
/* Enable CL37 BAM */
if (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
@@ -5924,7 +5924,7 @@ int bnx2x_set_led(struct link_params *params,
(tmp | EMAC_LED_OVERRIDE));
/*
* return here without enabling traffic
- * LED blink andsetting rate in ON mode.
+ * LED blink and setting rate in ON mode.
* In oper mode, enabling LED blink
* and setting rate is needed.
*/
@@ -5936,7 +5936,11 @@ int bnx2x_set_led(struct link_params *params,
* This is a work-around for HW issue found when link
* is up in CL73
*/
- REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+ if ((!CHIP_IS_E3(bp)) ||
+ (CHIP_IS_E3(bp) &&
+ mode == LED_MODE_ON))
+ REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+
if (CHIP_IS_E1x(bp) ||
CHIP_IS_E2(bp) ||
(mode == LED_MODE_ON))
@@ -10638,8 +10642,7 @@ static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_HW_LOCK_REQUIRED |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_HW_LOCK_REQUIRED,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10765,8 +10768,7 @@ static struct bnx2x_phy phy_8706 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_INIT_XGXS_FIRST |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_INIT_XGXS_FIRST,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10797,8 +10799,7 @@ static struct bnx2x_phy phy_8726 = {
.addr = 0xff,
.def_md_devad = 0,
.flags = (FLAGS_HW_LOCK_REQUIRED |
- FLAGS_INIT_XGXS_FIRST |
- FLAGS_TX_ERROR_CHECK),
+ FLAGS_INIT_XGXS_FIRST),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@@ -10829,8 +10830,7 @@ static struct bnx2x_phy phy_8727 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
.addr = 0xff,
.def_md_devad = 0,
- .flags = (FLAGS_FAN_FAILURE_DET_REQ |
- FLAGS_TX_ERROR_CHECK),
+ .flags = FLAGS_FAN_FAILURE_DET_REQ,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index f74582a22c6..15f800085bb 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -407,8 +407,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
- opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) |
- (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
+ opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
+ (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
#ifdef __BIG_ENDIAN
@@ -1419,7 +1419,7 @@ static void bnx2x_hc_int_enable(struct bnx2x *bp)
if (!CHIP_IS_E1(bp)) {
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
@@ -1471,7 +1471,7 @@ static void bnx2x_igu_int_enable(struct bnx2x *bp)
/* init leading/trailing edge */
if (IS_MF(bp)) {
- val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xee0f | (1 << (BP_VN(bp) + 4)));
if (bp->port.pmf)
/* enable nig and gpio3 attention */
val |= 0x1100;
@@ -2287,7 +2287,7 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
int vn;
bp->vn_weight_sum = 0;
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
u32 vn_cfg = bp->mf_config[vn];
u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
@@ -2320,12 +2320,18 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
}
+/* returns func by VN for current port */
+static inline int func_by_vn(struct bnx2x *bp, int vn)
+{
+ return 2 * vn + BP_PORT(bp);
+}
+
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
{
struct rate_shaping_vars_per_vn m_rs_vn;
struct fairness_vars_per_vn m_fair_vn;
u32 vn_cfg = bp->mf_config[vn];
- int func = 2*vn + BP_PORT(bp);
+ int func = func_by_vn(bp, vn);
u16 vn_min_rate, vn_max_rate;
int i;
@@ -2422,7 +2428,7 @@ void bnx2x_read_mf_cfg(struct bnx2x *bp)
*
* and there are 2 functions per port
*/
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
if (func >= E1H_FUNC_MAX)
@@ -2454,7 +2460,7 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
/* calculate and set min-max rate for each vn */
if (bp->port.pmf)
- for (vn = VN_0; vn < E1HVN_MAX; vn++)
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
bnx2x_init_vn_minmax(bp, vn);
/* always enable rate shaping and fairness */
@@ -2473,16 +2479,15 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type)
static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
{
- int port = BP_PORT(bp);
int func;
int vn;
/* Set the attention towards other drivers on the same port */
- for (vn = VN_0; vn < E1HVN_MAX; vn++) {
- if (vn == BP_E1HVN(bp))
+ for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
+ if (vn == BP_VN(bp))
continue;
- func = ((vn << 1) | port);
+ func = func_by_vn(bp, vn);
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
(LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
}
@@ -2577,7 +2582,7 @@ static void bnx2x_pmf_update(struct bnx2x *bp)
bnx2x_dcbx_pmf_update(bp);
/* enable nig attention */
- val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
+ val = (0xff0f | (1 << (BP_VN(bp) + 4)));
if (bp->common.int_block == INT_BLOCK_HC) {
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
@@ -2756,8 +2761,14 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
u16 tpa_agg_size = 0;
if (!fp->disable_tpa) {
- pause->sge_th_hi = 250;
- pause->sge_th_lo = 150;
+ pause->sge_th_lo = SGE_TH_LO(bp);
+ pause->sge_th_hi = SGE_TH_HI(bp);
+
+ /* validate SGE ring has enough to cross high threshold */
+ WARN_ON(bp->dropless_fc &&
+ pause->sge_th_hi + FW_PREFETCH_CNT >
+ MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
+
tpa_agg_size = min_t(u32,
(min_t(u32, 8, MAX_SKB_FRAGS) *
SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
@@ -2771,10 +2782,21 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
/* pause - not for e1 */
if (!CHIP_IS_E1(bp)) {
- pause->bd_th_hi = 350;
- pause->bd_th_lo = 250;
- pause->rcq_th_hi = 350;
- pause->rcq_th_lo = 250;
+ pause->bd_th_lo = BD_TH_LO(bp);
+ pause->bd_th_hi = BD_TH_HI(bp);
+
+ pause->rcq_th_lo = RCQ_TH_LO(bp);
+ pause->rcq_th_hi = RCQ_TH_HI(bp);
+ /*
+ * validate that rings have enough entries to cross
+ * high thresholds
+ */
+ WARN_ON(bp->dropless_fc &&
+ pause->bd_th_hi + FW_PREFETCH_CNT >
+ bp->rx_ring_size);
+ WARN_ON(bp->dropless_fc &&
+ pause->rcq_th_hi + FW_PREFETCH_CNT >
+ NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
pause->pri_map = 1;
}
@@ -2802,9 +2824,7 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
* For PF Clients it should be the maximum avaliable number.
* VF driver(s) may want to define it to a smaller value.
*/
- rxq_init->max_tpa_queues =
- (CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
- ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+ rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
rxq_init->fw_sb_id = fp->fw_sb_id;
@@ -4808,6 +4828,37 @@ void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm,
hc_sm->time_to_expire = 0xFFFFFFFF;
}
+
+/* allocates state machine ids. */
+static inline
+void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
+{
+ /* zero out state machine indices */
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
+
+ /* map indices */
+ /* rx indices */
+ index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
+ SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+
+ /* tx indices */
+ index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+ index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
+ SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+}
+
static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
u8 vf_valid, int fw_sb_id, int igu_sb_id)
{
@@ -4839,6 +4890,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
hc_sm_p = sb_data_e2.common.state_machine;
sb_data_p = (u32 *)&sb_data_e2;
data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
+ bnx2x_map_sb_state_machines(sb_data_e2.index_data);
} else {
memset(&sb_data_e1x, 0,
sizeof(struct hc_status_block_data_e1x));
@@ -4853,6 +4905,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
hc_sm_p = sb_data_e1x.common.state_machine;
sb_data_p = (u32 *)&sb_data_e1x;
data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
+ bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
}
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
@@ -4890,7 +4943,7 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
int igu_seg_id;
int port = BP_PORT(bp);
int func = BP_FUNC(bp);
- int reg_offset;
+ int reg_offset, reg_offset_en5;
u64 section;
int index;
struct hc_sp_status_block_data sp_sb_data;
@@ -4913,6 +4966,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+ MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
int sindex;
/* take care of sig[0]..sig[4] */
@@ -4927,7 +4982,7 @@ static void bnx2x_init_def_sb(struct bnx2x *bp)
* and not 16 between the different groups
*/
bp->attn_group[index].sig[4] = REG_RD(bp,
- reg_offset + 0x10 + 0x4*index);
+ reg_offset_en5 + 0x4*index);
else
bp->attn_group[index].sig[4] = 0;
}
@@ -5802,7 +5857,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
* take the UNDI lock to protect undi_unload flow from accessing
* registers while we're resetting the chip
*/
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
@@ -5814,7 +5869,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
}
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
@@ -6671,12 +6726,16 @@ static int bnx2x_init_hw_func(struct bnx2x *bp)
if (CHIP_MODE_IS_4_PORT(bp))
dsb_idx = BP_FUNC(bp);
else
- dsb_idx = BP_E1HVN(bp);
+ dsb_idx = BP_VN(bp);
prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
IGU_BC_BASE_DSB_PROD + dsb_idx :
IGU_NORM_BASE_DSB_PROD + dsb_idx);
+ /*
+ * igu prods come in chunks of E1HVN_MAX (4) -
+ * does not matters what is the current chip mode
+ */
for (i = 0; i < (num_segs * E1HVN_MAX);
i += E1HVN_MAX) {
addr = IGU_REG_PROD_CONS_MEMORY +
@@ -7568,9 +7627,12 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
u8 *mac_addr = bp->dev->dev_addr;
u32 val;
+ u16 pmc;
+
/* The mac address is written to entries 1-4 to
- preserve entry 0 which is used by the PMF */
- u8 entry = (BP_E1HVN(bp) + 1)*8;
+ * preserve entry 0 which is used by the PMF
+ */
+ u8 entry = (BP_VN(bp) + 1)*8;
val = (mac_addr[0] << 8) | mac_addr[1];
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
@@ -7579,6 +7641,11 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode)
(mac_addr[4] << 8) | mac_addr[5];
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
+ /* Enable the PME and clear the status */
+ pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc);
+ pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
+ pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc);
+
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
} else
@@ -8546,10 +8613,12 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
/* Check if there is any driver already loaded */
val = REG_RD(bp, MISC_REG_UNPREPARED);
if (val == 0x1) {
- /* Check if it is the UNDI driver
+
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+ /*
+ * Check if it is the UNDI driver
* UNDI driver initializes CID offset for normal bell to 0x7
*/
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
if (val == 0x7) {
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
@@ -8587,9 +8656,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
bnx2x_fw_command(bp, reset_code, 0);
}
- /* now it's safe to release the lock */
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
bnx2x_undi_int_disable(bp);
port = BP_PORT(bp);
@@ -8639,8 +8705,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
- } else
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+ }
+
+ /* now it's safe to release the lock */
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
}
@@ -8777,13 +8845,13 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
{
int pfid = BP_FUNC(bp);
- int vn = BP_E1HVN(bp);
int igu_sb_id;
u32 val;
u8 fid, igu_sb_cnt = 0;
bp->igu_base_sb = 0xff;
if (CHIP_INT_MODE_IS_BC(bp)) {
+ int vn = BP_VN(bp);
igu_sb_cnt = bp->igu_sb_cnt;
bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
FP_SB_MAX_E1x;
@@ -9416,6 +9484,10 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
bp->igu_base_sb = 0;
} else {
bp->common.int_block = INT_BLOCK_IGU;
+
+ /* do not allow device reset during IGU info preocessing */
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+
val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
@@ -9447,6 +9519,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
bnx2x_get_igu_cam_info(bp);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
}
/*
@@ -9473,7 +9546,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
bp->mf_ov = 0;
bp->mf_mode = 0;
- vn = BP_E1HVN(bp);
+ vn = BP_VN(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
@@ -9593,13 +9666,6 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
/* port info */
bnx2x_get_port_hwinfo(bp);
- if (!BP_NOMCP(bp)) {
- bp->fw_seq =
- (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
- DRV_MSG_SEQ_NUMBER_MASK);
- BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
- }
-
/* Get MAC addresses */
bnx2x_get_mac_hwinfo(bp);
@@ -9765,6 +9831,14 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
if (!BP_NOMCP(bp))
bnx2x_undi_unload(bp);
+ /* init fw_seq after undi_unload! */
+ if (!BP_NOMCP(bp)) {
+ bp->fw_seq =
+ (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+ DRV_MSG_SEQ_NUMBER_MASK);
+ BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+ }
+
if (CHIP_REV_IS_FPGA(bp))
dev_err(&bp->pdev->dev, "FPGA detected\n");
@@ -10259,17 +10333,21 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
/* clean indirect addresses */
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET);
- /* Clean the following indirect addresses for all functions since it
+ /*
+ * Clean the following indirect addresses for all functions since it
* is not used by the driver.
*/
REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+
+ if (CHIP_IS_E1x(bp)) {
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+ }
/*
* Enable internal target-read (in case we are probed after PF FLR).
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 40266c14e6d..fc7bd0f23c0 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1384,6 +1384,18 @@
Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
+/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688
+/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0
/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
128 bit vector */
#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
@@ -5320,7 +5332,7 @@
#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0)
#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1)
-#define XMAC_CTRL_REG_CORE_LOCAL_LPBK (0x1<<3)
+#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2)
#define XMAC_CTRL_REG_RX_EN (0x1<<1)
#define XMAC_CTRL_REG_SOFT_RESET (0x1<<6)
#define XMAC_CTRL_REG_TX_EN (0x1<<0)
@@ -5766,7 +5778,7 @@
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
#define HW_LOCK_RESOURCE_SPIO 2
-#define HW_LOCK_RESOURCE_UNDI 5
+#define HW_LOCK_RESOURCE_RESET 5
#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18)
@@ -6853,6 +6865,9 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
#define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000
#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 771f6803b23..9908f2bbcf7 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -710,7 +710,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp)
break;
case MAC_TYPE_NONE: /* unreached */
- BNX2X_ERR("stats updated by DMAE but no MAC active\n");
+ DP(BNX2X_MSG_STATS,
+ "stats updated by DMAE but no MAC active\n");
return -1;
default: /* unreached */
@@ -1391,7 +1392,7 @@ static void bnx2x_port_stats_base_init(struct bnx2x *bp)
static void bnx2x_func_stats_base_init(struct bnx2x *bp)
{
- int vn, vn_max = IS_MF(bp) ? E1HVN_MAX : E1VN_MAX;
+ int vn, vn_max = IS_MF(bp) ? BP_MAX_VN_NUM(bp) : E1VN_MAX;
u32 func_stx;
/* sanity */
@@ -1404,7 +1405,7 @@ static void bnx2x_func_stats_base_init(struct bnx2x *bp)
func_stx = bp->func_stx;
for (vn = VN_0; vn < vn_max; vn++) {
- int mb_idx = CHIP_IS_E1x(bp) ? 2*vn + BP_PORT(bp) : vn;
+ int mb_idx = BP_FW_MB_IDX_VN(bp, vn);
bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param);
bnx2x_func_stats_init(bp);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a047eb973e3..47b928ed08f 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2168,7 +2168,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
}
re_arm:
- queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
+ if (!bond->kill_timers)
+ queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
out:
read_unlock(&bond->lock);
}
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 7f8b20a34ee..d4fbd2e6261 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1440,7 +1440,8 @@ void bond_alb_monitor(struct work_struct *work)
}
re_arm:
- queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
+ if (!bond->kill_timers)
+ queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
out:
read_unlock(&bond->lock);
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 43f2ea54108..6d79b78cfc7 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -777,6 +777,9 @@ static void bond_resend_igmp_join_requests(struct bonding *bond)
read_lock(&bond->lock);
+ if (bond->kill_timers)
+ goto out;
+
/* rejoin all groups on bond device */
__bond_resend_igmp_join_requests(bond->dev);
@@ -790,9 +793,9 @@ static void bond_resend_igmp_join_requests(struct bonding *bond)
__bond_resend_igmp_join_requests(vlan_dev);
}
- if (--bond->igmp_retrans > 0)
+ if ((--bond->igmp_retrans > 0) && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
-
+out:
read_unlock(&bond->lock);
}
@@ -2538,7 +2541,7 @@ void bond_mii_monitor(struct work_struct *work)
}
re_arm:
- if (bond->params.miimon)
+ if (bond->params.miimon && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->mii_work,
msecs_to_jiffies(bond->params.miimon));
out:
@@ -2886,7 +2889,7 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
}
re_arm:
- if (bond->params.arp_interval)
+ if (bond->params.arp_interval && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
read_unlock(&bond->lock);
@@ -3154,7 +3157,7 @@ void bond_activebackup_arp_mon(struct work_struct *work)
bond_ab_arp_probe(bond);
re_arm:
- if (bond->params.arp_interval)
+ if (bond->params.arp_interval && !bond->kill_timers)
queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
read_unlock(&bond->lock);
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index a81249246ec..2adc294f512 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -46,6 +46,7 @@
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 805076c54f1..da5a5d9b8af 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1146,12 +1146,14 @@ static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new)
if (te && te->ctx && te->client && te->client->redirect) {
update_tcb = te->client->redirect(te->ctx, old, new, e);
if (update_tcb) {
+ rcu_read_lock();
l2t_hold(L2DATA(tdev), e);
+ rcu_read_unlock();
set_l2t_ix(tdev, tid, e);
}
}
}
- l2t_release(L2DATA(tdev), e);
+ l2t_release(tdev, e);
}
/*
@@ -1264,7 +1266,7 @@ int cxgb3_offload_activate(struct adapter *adapter)
goto out_free;
err = -ENOMEM;
- L2DATA(dev) = t3_init_l2t(l2t_capacity);
+ RCU_INIT_POINTER(dev->l2opt, t3_init_l2t(l2t_capacity));
if (!L2DATA(dev))
goto out_free;
@@ -1298,16 +1300,24 @@ int cxgb3_offload_activate(struct adapter *adapter)
out_free_l2t:
t3_free_l2t(L2DATA(dev));
- L2DATA(dev) = NULL;
+ rcu_assign_pointer(dev->l2opt, NULL);
out_free:
kfree(t);
return err;
}
+static void clean_l2_data(struct rcu_head *head)
+{
+ struct l2t_data *d = container_of(head, struct l2t_data, rcu_head);
+ t3_free_l2t(d);
+}
+
+
void cxgb3_offload_deactivate(struct adapter *adapter)
{
struct t3cdev *tdev = &adapter->tdev;
struct t3c_data *t = T3C_DATA(tdev);
+ struct l2t_data *d;
remove_adapter(adapter);
if (list_empty(&adapter_list))
@@ -1315,8 +1325,11 @@ void cxgb3_offload_deactivate(struct adapter *adapter)
free_tid_maps(&t->tid_maps);
T3C_DATA(tdev) = NULL;
- t3_free_l2t(L2DATA(tdev));
- L2DATA(tdev) = NULL;
+ rcu_read_lock();
+ d = L2DATA(tdev);
+ rcu_read_unlock();
+ rcu_assign_pointer(tdev->l2opt, NULL);
+ call_rcu(&d->rcu_head, clean_l2_data);
if (t->nofail_skb)
kfree_skb(t->nofail_skb);
kfree(t);
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index f452c400325..41540978a17 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -300,14 +300,21 @@ static inline void reuse_entry(struct l2t_entry *e, struct neighbour *neigh)
struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
struct net_device *dev)
{
- struct l2t_entry *e;
- struct l2t_data *d = L2DATA(cdev);
+ struct l2t_entry *e = NULL;
+ struct l2t_data *d;
+ int hash;
u32 addr = *(u32 *) neigh->primary_key;
int ifidx = neigh->dev->ifindex;
- int hash = arp_hash(addr, ifidx, d);
struct port_info *p = netdev_priv(dev);
int smt_idx = p->port_id;
+ rcu_read_lock();
+ d = L2DATA(cdev);
+ if (!d)
+ goto done_rcu;
+
+ hash = arp_hash(addr, ifidx, d);
+
write_lock_bh(&d->lock);
for (e = d->l2tab[hash].first; e; e = e->next)
if (e->addr == addr && e->ifindex == ifidx &&
@@ -338,6 +345,8 @@ struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
}
done:
write_unlock_bh(&d->lock);
+done_rcu:
+ rcu_read_unlock();
return e;
}
diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/cxgb3/l2t.h
index 7a12d52ed4f..c5f54796e2c 100644
--- a/drivers/net/cxgb3/l2t.h
+++ b/drivers/net/cxgb3/l2t.h
@@ -76,6 +76,7 @@ struct l2t_data {
atomic_t nfree; /* number of free entries */
rwlock_t lock;
struct l2t_entry l2tab[0];
+ struct rcu_head rcu_head; /* to handle rcu cleanup */
};
typedef void (*arp_failure_handler_func)(struct t3cdev * dev,
@@ -99,7 +100,7 @@ static inline void set_arp_failure_handler(struct sk_buff *skb,
/*
* Getting to the L2 data from an offload device.
*/
-#define L2DATA(dev) ((dev)->l2opt)
+#define L2DATA(cdev) (rcu_dereference((cdev)->l2opt))
#define W_TCB_L2T_IX 0
#define S_TCB_L2T_IX 7
@@ -126,15 +127,22 @@ static inline int l2t_send(struct t3cdev *dev, struct sk_buff *skb,
return t3_l2t_send_slow(dev, skb, e);
}
-static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e)
+static inline void l2t_release(struct t3cdev *t, struct l2t_entry *e)
{
- if (atomic_dec_and_test(&e->refcnt))
+ struct l2t_data *d;
+
+ rcu_read_lock();
+ d = L2DATA(t);
+
+ if (atomic_dec_and_test(&e->refcnt) && d)
t3_l2e_free(d, e);
+
+ rcu_read_unlock();
}
static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e)
{
- if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
+ if (d && atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
atomic_dec(&d->nfree);
}
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index c9957b7f17b..b4efa292fd6 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -3712,6 +3712,9 @@ static int __devinit init_one(struct pci_dev *pdev,
setup_debugfs(adapter);
}
+ /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
+ pdev->needs_freset = 1;
+
if (is_offload(adapter))
attach_ulds(adapter);
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8545c7aa93e..a5a89ecb6f3 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -4026,6 +4026,12 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
checksum += eeprom_data;
}
+#ifdef CONFIG_PARISC
+ /* This is a signature and not a checksum on HP c8000 */
+ if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6))
+ return E1000_SUCCESS;
+
+#endif
if (checksum == (u16) EEPROM_SUM)
return E1000_SUCCESS;
else {
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 25a8c2adb00..0caf3c323ec 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -1669,10 +1669,10 @@ static int gfar_get_cls_all(struct gfar_private *priv,
u32 i = 0;
list_for_each_entry(comp, &priv->rx_list.list, list) {
- if (i <= cmd->rule_cnt) {
- rule_locs[i] = comp->fs.location;
- i++;
- }
+ if (i == cmd->rule_cnt)
+ return -EMSGSIZE;
+ rule_locs[i] = comp->fs.location;
+ i++;
}
cmd->data = MAX_FILER_IDX;
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 16ce45c1193..52a39000c42 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -428,6 +428,7 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev)
dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE);
status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN);
+ greth->tx_bufs_length[greth->tx_next] = skb->len & GRETH_BD_LEN;
/* Wrap around descriptor ring */
if (greth->tx_next == GRETH_TXBD_NUM_MASK) {
@@ -490,7 +491,8 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
if (nr_frags != 0)
status = GRETH_TXBD_MORE;
- status |= GRETH_TXBD_CSALL;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ status |= GRETH_TXBD_CSALL;
status |= skb_headlen(skb) & GRETH_BD_LEN;
if (greth->tx_next == GRETH_TXBD_NUM_MASK)
status |= GRETH_BD_WR;
@@ -513,7 +515,9 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev)
greth->tx_skbuff[curr_tx] = NULL;
bdp = greth->tx_bd_base + curr_tx;
- status = GRETH_TXBD_CSALL | GRETH_BD_EN;
+ status = GRETH_BD_EN;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ status |= GRETH_TXBD_CSALL;
status |= frag->size & GRETH_BD_LEN;
/* Wrap around descriptor ring */
@@ -641,6 +645,7 @@ static void greth_clean_tx(struct net_device *dev)
dev->stats.tx_fifo_errors++;
}
dev->stats.tx_packets++;
+ dev->stats.tx_bytes += greth->tx_bufs_length[greth->tx_last];
greth->tx_last = NEXT_TX(greth->tx_last);
greth->tx_free++;
}
@@ -695,6 +700,7 @@ static void greth_clean_tx_gbit(struct net_device *dev)
greth->tx_skbuff[greth->tx_last] = NULL;
greth_update_tx_stats(dev, stat);
+ dev->stats.tx_bytes += skb->len;
bdp = greth->tx_bd_base + greth->tx_last;
@@ -796,6 +802,7 @@ static int greth_rx(struct net_device *dev, int limit)
memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len);
skb->protocol = eth_type_trans(skb, dev);
+ dev->stats.rx_bytes += pkt_len;
dev->stats.rx_packets++;
netif_receive_skb(skb);
}
@@ -910,6 +917,7 @@ static int greth_rx_gbit(struct net_device *dev, int limit)
skb->protocol = eth_type_trans(skb, dev);
dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
netif_receive_skb(skb);
greth->rx_skbuff[greth->rx_cur] = newskb;
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
index 9a0040dee4d..232a622a85b 100644
--- a/drivers/net/greth.h
+++ b/drivers/net/greth.h
@@ -103,6 +103,7 @@ struct greth_private {
unsigned char *tx_bufs[GRETH_TXBD_NUM];
unsigned char *rx_bufs[GRETH_RXBD_NUM];
+ u16 tx_bufs_length[GRETH_TXBD_NUM];
u16 tx_next;
u16 tx_last;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 3e667926940..d393f1e764e 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -636,8 +636,8 @@ static int ibmveth_open(struct net_device *netdev)
netdev_err(netdev, "unable to request irq 0x%x, rc %d\n",
netdev->irq, rc);
do {
- rc = h_free_logical_lan(adapter->vdev->unit_address);
- } while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
+ lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
+ } while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
goto err_out;
}
@@ -757,7 +757,7 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
struct ibmveth_adapter *adapter = netdev_priv(dev);
unsigned long set_attr, clr_attr, ret_attr;
unsigned long set_attr6, clr_attr6;
- long ret, ret6;
+ long ret, ret4, ret6;
int rc1 = 0, rc2 = 0;
int restart = 0;
@@ -770,6 +770,8 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
set_attr = 0;
clr_attr = 0;
+ set_attr6 = 0;
+ clr_attr6 = 0;
if (data) {
set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM;
@@ -784,16 +786,20 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) &&
!(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) &&
(ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) {
- ret = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
+ ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
set_attr, &ret_attr);
- if (ret != H_SUCCESS) {
+ if (ret4 != H_SUCCESS) {
netdev_err(dev, "unable to change IPv4 checksum "
"offload settings. %d rc=%ld\n",
- data, ret);
+ data, ret4);
+
+ h_illan_attributes(adapter->vdev->unit_address,
+ set_attr, clr_attr, &ret_attr);
+
+ if (data == 1)
+ dev->features &= ~NETIF_F_IP_CSUM;
- ret = h_illan_attributes(adapter->vdev->unit_address,
- set_attr, clr_attr, &ret_attr);
} else {
adapter->fw_ipv4_csum_support = data;
}
@@ -804,15 +810,18 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
if (ret6 != H_SUCCESS) {
netdev_err(dev, "unable to change IPv6 checksum "
"offload settings. %d rc=%ld\n",
- data, ret);
+ data, ret6);
+
+ h_illan_attributes(adapter->vdev->unit_address,
+ set_attr6, clr_attr6, &ret_attr);
+
+ if (data == 1)
+ dev->features &= ~NETIF_F_IPV6_CSUM;
- ret = h_illan_attributes(adapter->vdev->unit_address,
- set_attr6, clr_attr6,
- &ret_attr);
} else
adapter->fw_ipv6_csum_support = data;
- if (ret != H_SUCCESS || ret6 != H_SUCCESS)
+ if (ret4 == H_SUCCESS || ret6 == H_SUCCESS)
adapter->rx_csum = data;
else
rc1 = -EIO;
@@ -930,6 +939,7 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
union ibmveth_buf_desc descs[6];
int last, i;
int force_bounce = 0;
+ dma_addr_t dma_addr;
/*
* veth handles a maximum of 6 segments including the header, so
@@ -994,17 +1004,16 @@ retry_bounce:
}
/* Map the header */
- descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
- skb_headlen(skb),
- DMA_TO_DEVICE);
- if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address))
+ dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
goto map_failed;
descs[0].fields.flags_len = desc_flags | skb_headlen(skb);
+ descs[0].fields.address = dma_addr;
/* Map the frags */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- unsigned long dma_addr;
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
dma_addr = dma_map_page(&adapter->vdev->dev, frag->page,
@@ -1026,7 +1035,12 @@ retry_bounce:
netdev->stats.tx_bytes += skb->len;
}
- for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++)
+ dma_unmap_single(&adapter->vdev->dev,
+ descs[0].fields.address,
+ descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+ DMA_TO_DEVICE);
+
+ for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++)
dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
DMA_TO_DEVICE);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 22790394318..e1fcc958927 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1321,8 +1321,8 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
if (ring_is_rsc_enabled(rx_ring))
pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
- /* if this is a skb from previous receive DMA will be 0 */
- if (rx_buffer_info->dma) {
+ /* linear means we are building an skb from multiple pages */
+ if (!skb_is_nonlinear(skb)) {
u16 hlen;
if (pkt_is_rsc &&
!(staterr & IXGBE_RXD_STAT_EOP) &&
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index dfc82720065..ed2a3977c6e 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -799,5 +799,11 @@ static void __exit cleanup_netconsole(void)
}
}
-module_init(init_netconsole);
+/*
+ * Use late_initcall to ensure netconsole is
+ * initialized after network device driver if built-in.
+ *
+ * late_initcall() and module_init() are identical if built as module.
+ */
+late_initcall(init_netconsole);
module_exit(cleanup_netconsole);
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index 59fac77d0db..a09a07197eb 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -127,8 +127,8 @@ struct pch_gbe_regs {
/* Reset */
#define PCH_GBE_ALL_RST 0x80000000 /* All reset */
-#define PCH_GBE_TX_RST 0x40000000 /* TX MAC, TX FIFO, TX DMA reset */
-#define PCH_GBE_RX_RST 0x04000000 /* RX MAC, RX FIFO, RX DMA reset */
+#define PCH_GBE_TX_RST 0x00008000 /* TX MAC, TX FIFO, TX DMA reset */
+#define PCH_GBE_RX_RST 0x00004000 /* RX MAC, RX FIFO, RX DMA reset */
/* TCP/IP Accelerator Control */
#define PCH_GBE_EX_LIST_EN 0x00000008 /* External List Enable */
@@ -276,6 +276,9 @@ struct pch_gbe_regs {
#define PCH_GBE_RX_DMA_EN 0x00000002 /* Enables Receive DMA */
#define PCH_GBE_TX_DMA_EN 0x00000001 /* Enables Transmission DMA */
+/* RX DMA STATUS */
+#define PCH_GBE_IDLE_CHECK 0xFFFFFFFE
+
/* Wake On LAN Status */
#define PCH_GBE_WLS_BR 0x00000008 /* Broadcas Address */
#define PCH_GBE_WLS_MLT 0x00000004 /* Multicast Address */
@@ -471,6 +474,7 @@ struct pch_gbe_tx_desc {
struct pch_gbe_buffer {
struct sk_buff *skb;
dma_addr_t dma;
+ unsigned char *rx_buffer;
unsigned long time_stamp;
u16 length;
bool mapped;
@@ -511,6 +515,9 @@ struct pch_gbe_tx_ring {
struct pch_gbe_rx_ring {
struct pch_gbe_rx_desc *desc;
dma_addr_t dma;
+ unsigned char *rx_buff_pool;
+ dma_addr_t rx_buff_pool_logic;
+ unsigned int rx_buff_pool_size;
unsigned int size;
unsigned int count;
unsigned int next_to_use;
@@ -622,6 +629,7 @@ struct pch_gbe_adapter {
unsigned long rx_buffer_len;
unsigned long tx_queue_len;
bool have_msi;
+ bool rx_stop_flag;
};
extern const char pch_driver_version[];
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index eac3c5ca973..b8b4ba27b0e 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -20,7 +20,6 @@
#include "pch_gbe.h"
#include "pch_gbe_api.h"
-#include <linux/prefetch.h>
#define DRV_VERSION "1.00"
const char pch_driver_version[] = DRV_VERSION;
@@ -34,11 +33,15 @@ const char pch_driver_version[] = DRV_VERSION;
#define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */
#define PCH_GBE_COPYBREAK_DEFAULT 256
#define PCH_GBE_PCI_BAR 1
+#define PCH_GBE_RESERVE_MEMORY 0x200000 /* 2MB */
/* Macros for ML7223 */
#define PCI_VENDOR_ID_ROHM 0x10db
#define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802
+
#define PCH_GBE_TX_WEIGHT 64
#define PCH_GBE_RX_WEIGHT 64
#define PCH_GBE_RX_BUFFER_WRITE 16
@@ -52,6 +55,7 @@ const char pch_driver_version[] = DRV_VERSION;
)
/* Ethertype field values */
+#define PCH_GBE_MAX_RX_BUFFER_SIZE 0x2880
#define PCH_GBE_MAX_JUMBO_FRAME_SIZE 10318
#define PCH_GBE_FRAME_SIZE_2048 2048
#define PCH_GBE_FRAME_SIZE_4096 4096
@@ -83,10 +87,12 @@ const char pch_driver_version[] = DRV_VERSION;
#define PCH_GBE_INT_ENABLE_MASK ( \
PCH_GBE_INT_RX_DMA_CMPLT | \
PCH_GBE_INT_RX_DSC_EMP | \
+ PCH_GBE_INT_RX_FIFO_ERR | \
PCH_GBE_INT_WOL_DET | \
PCH_GBE_INT_TX_CMPLT \
)
+#define PCH_GBE_INT_DISABLE_ALL 0
static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
@@ -138,6 +144,27 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit)
if (!tmp)
pr_err("Error: busy bit is not cleared\n");
}
+
+/**
+ * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
+ * @reg: Pointer of register
+ * @busy: Busy bit
+ */
+static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
+{
+ u32 tmp;
+ int ret = -1;
+ /* wait busy */
+ tmp = 20;
+ while ((ioread32(reg) & bit) && --tmp)
+ udelay(5);
+ if (!tmp)
+ pr_err("Error: busy bit is not cleared\n");
+ else
+ ret = 0;
+ return ret;
+}
+
/**
* pch_gbe_mac_mar_set - Set MAC address register
* @hw: Pointer to the HW structure
@@ -189,6 +216,17 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
return;
}
+static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
+{
+ /* Read the MAC address. and store to the private data */
+ pch_gbe_mac_read_mac_addr(hw);
+ iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
+ pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
+ /* Setup the MAC address */
+ pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
+ return;
+}
+
/**
* pch_gbe_mac_init_rx_addrs - Initialize receive address's
* @hw: Pointer to the HW structure
@@ -671,13 +709,8 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter)
tcpip = ioread32(&hw->reg->TCPIP_ACC);
- if (netdev->features & NETIF_F_RXCSUM) {
- tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF;
- tcpip |= PCH_GBE_RX_TCPIPACC_EN;
- } else {
- tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
- tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
- }
+ tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
+ tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
iowrite32(tcpip, &hw->reg->TCPIP_ACC);
return;
}
@@ -717,13 +750,6 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter)
iowrite32(rdba, &hw->reg->RX_DSC_BASE);
iowrite32(rdlen, &hw->reg->RX_DSC_SIZE);
iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P);
-
- /* Enables Receive DMA */
- rxdma = ioread32(&hw->reg->DMA_CTRL);
- rxdma |= PCH_GBE_RX_DMA_EN;
- iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Enables Receive */
- iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
}
/**
@@ -1097,6 +1123,48 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
+static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+{
+ struct pch_gbe_hw *hw = &adapter->hw;
+ u32 rxdma;
+ u16 value;
+ int ret;
+
+ /* Disable Receive DMA */
+ rxdma = ioread32(&hw->reg->DMA_CTRL);
+ rxdma &= ~PCH_GBE_RX_DMA_EN;
+ iowrite32(rxdma, &hw->reg->DMA_CTRL);
+ /* Wait Rx DMA BUS is IDLE */
+ ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
+ if (ret) {
+ /* Disable Bus master */
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
+ value &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+ /* Stop Receive */
+ pch_gbe_mac_reset_rx(hw);
+ /* Enable Bus master */
+ value |= PCI_COMMAND_MASTER;
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+ } else {
+ /* Stop Receive */
+ pch_gbe_mac_reset_rx(hw);
+ }
+}
+
+static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+{
+ u32 rxdma;
+
+ /* Enables Receive DMA */
+ rxdma = ioread32(&hw->reg->DMA_CTRL);
+ rxdma |= PCH_GBE_RX_DMA_EN;
+ iowrite32(rxdma, &hw->reg->DMA_CTRL);
+ /* Enables Receive */
+ iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
+ return;
+}
+
/**
* pch_gbe_intr - Interrupt Handler
* @irq: Interrupt number
@@ -1123,7 +1191,17 @@ static irqreturn_t pch_gbe_intr(int irq, void *data)
if (int_st & PCH_GBE_INT_RX_FRAME_ERR)
adapter->stats.intr_rx_frame_err_count++;
if (int_st & PCH_GBE_INT_RX_FIFO_ERR)
- adapter->stats.intr_rx_fifo_err_count++;
+ if (!adapter->rx_stop_flag) {
+ adapter->stats.intr_rx_fifo_err_count++;
+ pr_debug("Rx fifo over run\n");
+ adapter->rx_stop_flag = true;
+ int_en = ioread32(&hw->reg->INT_EN);
+ iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
+ &hw->reg->INT_EN);
+ pch_gbe_stop_receive(adapter);
+ int_st |= ioread32(&hw->reg->INT_ST);
+ int_st = int_st & ioread32(&hw->reg->INT_EN);
+ }
if (int_st & PCH_GBE_INT_RX_DMA_ERR)
adapter->stats.intr_rx_dma_err_count++;
if (int_st & PCH_GBE_INT_TX_FIFO_ERR)
@@ -1135,21 +1213,18 @@ static irqreturn_t pch_gbe_intr(int irq, void *data)
/* When Rx descriptor is empty */
if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) {
adapter->stats.intr_rx_dsc_empty_count++;
- pr_err("Rx descriptor is empty\n");
+ pr_debug("Rx descriptor is empty\n");
int_en = ioread32(&hw->reg->INT_EN);
iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN);
if (hw->mac.tx_fc_enable) {
/* Set Pause packet */
pch_gbe_mac_set_pause_packet(hw);
}
- if ((int_en & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))
- == 0) {
- return IRQ_HANDLED;
- }
}
/* When request status is Receive interruption */
- if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))) {
+ if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) ||
+ (adapter->rx_stop_flag == true)) {
if (likely(napi_schedule_prep(&adapter->napi))) {
/* Enable only Rx Descriptor empty */
atomic_inc(&adapter->irq_sem);
@@ -1185,29 +1260,23 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter,
unsigned int i;
unsigned int bufsz;
- bufsz = adapter->rx_buffer_len + PCH_GBE_DMA_ALIGN;
+ bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
while ((cleaned_count--)) {
buffer_info = &rx_ring->buffer_info[i];
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- } else {
- skb = netdev_alloc_skb(netdev, bufsz);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->stats.rx_alloc_buff_failed++;
- break;
- }
- /* 64byte align */
- skb_reserve(skb, PCH_GBE_DMA_ALIGN);
-
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->stats.rx_alloc_buff_failed++;
+ break;
}
+ /* align */
+ skb_reserve(skb, NET_IP_ALIGN);
+ buffer_info->skb = skb;
+
buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data,
+ buffer_info->rx_buffer,
buffer_info->length,
DMA_FROM_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) {
@@ -1240,6 +1309,36 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter,
return;
}
+static int
+pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter,
+ struct pch_gbe_rx_ring *rx_ring, int cleaned_count)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct pch_gbe_buffer *buffer_info;
+ unsigned int i;
+ unsigned int bufsz;
+ unsigned int size;
+
+ bufsz = adapter->rx_buffer_len;
+
+ size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY;
+ rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size,
+ &rx_ring->rx_buff_pool_logic,
+ GFP_KERNEL);
+ if (!rx_ring->rx_buff_pool) {
+ pr_err("Unable to allocate memory for the receive poll buffer\n");
+ return -ENOMEM;
+ }
+ memset(rx_ring->rx_buff_pool, 0, size);
+ rx_ring->rx_buff_pool_size = size;
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i;
+ buffer_info->length = bufsz;
+ }
+ return 0;
+}
+
/**
* pch_gbe_alloc_tx_buffers - Allocate transmit buffers
* @adapter: Board private structure
@@ -1285,7 +1384,7 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
struct sk_buff *skb;
unsigned int i;
unsigned int cleaned_count = 0;
- bool cleaned = false;
+ bool cleaned = true;
pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean);
@@ -1296,7 +1395,6 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
while ((tx_desc->gbec_status & DSC_INIT16) == 0x0000) {
pr_debug("gbec_status:0x%04x\n", tx_desc->gbec_status);
- cleaned = true;
buffer_info = &tx_ring->buffer_info[i];
skb = buffer_info->skb;
@@ -1339,8 +1437,10 @@ pch_gbe_clean_tx(struct pch_gbe_adapter *adapter,
tx_desc = PCH_GBE_TX_DESC(*tx_ring, i);
/* weight of a sort for tx, to avoid endless transmit cleanup */
- if (cleaned_count++ == PCH_GBE_TX_WEIGHT)
+ if (cleaned_count++ == PCH_GBE_TX_WEIGHT) {
+ cleaned = false;
break;
+ }
}
pr_debug("called pch_gbe_unmap_and_free_tx_resource() %d count\n",
cleaned_count);
@@ -1380,7 +1480,7 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
unsigned int i;
unsigned int cleaned_count = 0;
bool cleaned = false;
- struct sk_buff *skb, *new_skb;
+ struct sk_buff *skb;
u8 dma_status;
u16 gbec_status;
u32 tcp_ip_status;
@@ -1401,13 +1501,12 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
rx_desc->gbec_status = DSC_INIT16;
buffer_info = &rx_ring->buffer_info[i];
skb = buffer_info->skb;
+ buffer_info->skb = NULL;
/* unmap dma */
dma_unmap_single(&pdev->dev, buffer_info->dma,
buffer_info->length, DMA_FROM_DEVICE);
buffer_info->mapped = false;
- /* Prefetch the packet */
- prefetch(skb->data);
pr_debug("RxDecNo = 0x%04x Status[DMA:0x%02x GBE:0x%04x "
"TCP:0x%08x] BufInf = 0x%p\n",
@@ -1427,70 +1526,16 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
pr_err("Receive CRC Error\n");
} else {
/* get receive length */
- /* length convert[-3] */
- length = (rx_desc->rx_words_eob) - 3;
-
- /* Decide the data conversion method */
- if (!(netdev->features & NETIF_F_RXCSUM)) {
- /* [Header:14][payload] */
- if (NET_IP_ALIGN) {
- /* Because alignment differs,
- * the new_skb is newly allocated,
- * and data is copied to new_skb.*/
- new_skb = netdev_alloc_skb(netdev,
- length + NET_IP_ALIGN);
- if (!new_skb) {
- /* dorrop error */
- pr_err("New skb allocation "
- "Error\n");
- goto dorrop;
- }
- skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data, skb->data,
- length);
- skb = new_skb;
- } else {
- /* DMA buffer is used as SKB as it is.*/
- buffer_info->skb = NULL;
- }
- } else {
- /* [Header:14][padding:2][payload] */
- /* The length includes padding length */
- length = length - PCH_GBE_DMA_PADDING;
- if ((length < copybreak) ||
- (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) {
- /* Because alignment differs,
- * the new_skb is newly allocated,
- * and data is copied to new_skb.
- * Padding data is deleted
- * at the time of a copy.*/
- new_skb = netdev_alloc_skb(netdev,
- length + NET_IP_ALIGN);
- if (!new_skb) {
- /* dorrop error */
- pr_err("New skb allocation "
- "Error\n");
- goto dorrop;
- }
- skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data, skb->data,
- ETH_HLEN);
- memcpy(&new_skb->data[ETH_HLEN],
- &skb->data[ETH_HLEN +
- PCH_GBE_DMA_PADDING],
- length - ETH_HLEN);
- skb = new_skb;
- } else {
- /* Padding data is deleted
- * by moving header data.*/
- memmove(&skb->data[PCH_GBE_DMA_PADDING],
- &skb->data[0], ETH_HLEN);
- skb_reserve(skb, NET_IP_ALIGN);
- buffer_info->skb = NULL;
- }
- }
- /* The length includes FCS length */
- length = length - ETH_FCS_LEN;
+ /* length convert[-3], length includes FCS length */
+ length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN;
+ if (rx_desc->rx_words_eob & 0x02)
+ length = length - 4;
+ /*
+ * buffer_info->rx_buffer: [Header:14][payload]
+ * skb->data: [Reserve:2][Header:14][payload]
+ */
+ memcpy(skb->data, buffer_info->rx_buffer, length);
+
/* update status of driver */
adapter->stats.rx_bytes += length;
adapter->stats.rx_packets++;
@@ -1509,7 +1554,6 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter,
pr_debug("Receive skb->ip_summed: %d length: %d\n",
skb->ip_summed, length);
}
-dorrop:
/* return some buffers to hardware, one at a time is too slow */
if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) {
pch_gbe_alloc_rx_buffers(adapter, rx_ring,
@@ -1714,9 +1758,15 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
pr_err("Error: can't bring device up\n");
return err;
}
+ err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
+ if (err) {
+ pr_err("Error: can't bring device up\n");
+ return err;
+ }
pch_gbe_alloc_tx_buffers(adapter, tx_ring);
pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
adapter->tx_queue_len = netdev->tx_queue_len;
+ pch_gbe_start_receive(&adapter->hw);
mod_timer(&adapter->watchdog_timer, jiffies);
@@ -1734,6 +1784,7 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter)
void pch_gbe_down(struct pch_gbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
/* signal that we're down so the interrupt handler does not
* reschedule our watchdog timer */
@@ -1752,6 +1803,12 @@ void pch_gbe_down(struct pch_gbe_adapter *adapter)
pch_gbe_reset(adapter);
pch_gbe_clean_tx_ring(adapter, adapter->tx_ring);
pch_gbe_clean_rx_ring(adapter, adapter->rx_ring);
+
+ pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size,
+ rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic);
+ rx_ring->rx_buff_pool_logic = 0;
+ rx_ring->rx_buff_pool_size = 0;
+ rx_ring->rx_buff_pool = NULL;
}
/**
@@ -2004,6 +2061,8 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu)
{
struct pch_gbe_adapter *adapter = netdev_priv(netdev);
int max_frame;
+ unsigned long old_rx_buffer_len = adapter->rx_buffer_len;
+ int err;
max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
@@ -2018,14 +2077,24 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu)
else if (max_frame <= PCH_GBE_FRAME_SIZE_8192)
adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192;
else
- adapter->rx_buffer_len = PCH_GBE_MAX_JUMBO_FRAME_SIZE;
- netdev->mtu = new_mtu;
- adapter->hw.mac.max_frame_size = max_frame;
+ adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE;
- if (netif_running(netdev))
- pch_gbe_reinit_locked(adapter);
- else
+ if (netif_running(netdev)) {
+ pch_gbe_down(adapter);
+ err = pch_gbe_up(adapter);
+ if (err) {
+ adapter->rx_buffer_len = old_rx_buffer_len;
+ pch_gbe_up(adapter);
+ return -ENOMEM;
+ } else {
+ netdev->mtu = new_mtu;
+ adapter->hw.mac.max_frame_size = max_frame;
+ }
+ } else {
pch_gbe_reset(adapter);
+ netdev->mtu = new_mtu;
+ adapter->hw.mac.max_frame_size = max_frame;
+ }
pr_debug("max_frame : %d rx_buffer_len : %d mtu : %d max_frame_size : %d\n",
max_frame, (u32) adapter->rx_buffer_len, netdev->mtu,
@@ -2099,33 +2168,39 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget)
{
struct pch_gbe_adapter *adapter =
container_of(napi, struct pch_gbe_adapter, napi);
- struct net_device *netdev = adapter->netdev;
int work_done = 0;
bool poll_end_flag = false;
bool cleaned = false;
+ u32 int_en;
pr_debug("budget : %d\n", budget);
- /* Keep link state information with original netdev */
- if (!netif_carrier_ok(netdev)) {
- poll_end_flag = true;
- } else {
- cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
- pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+ pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+ cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
- if (cleaned)
- work_done = budget;
- /* If no Tx and not enough Rx work done,
- * exit the polling mode
- */
- if ((work_done < budget) || !netif_running(netdev))
- poll_end_flag = true;
- }
+ if (!cleaned)
+ work_done = budget;
+ /* If no Tx and not enough Rx work done,
+ * exit the polling mode
+ */
+ if (work_done < budget)
+ poll_end_flag = true;
if (poll_end_flag) {
napi_complete(napi);
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_start_receive(&adapter->hw);
+ }
pch_gbe_irq_enable(adapter);
- }
+ } else
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_start_receive(&adapter->hw);
+ int_en = ioread32(&adapter->hw.reg->INT_EN);
+ iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
+ &adapter->hw.reg->INT_EN);
+ }
pr_debug("poll_end_flag : %d work_done : %d budget : %d\n",
poll_end_flag, work_done, budget);
@@ -2452,6 +2527,13 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = {
.class = (PCI_CLASS_NETWORK_ETHERNET << 8),
.class_mask = (0xFFFF00)
},
+ {.vendor = PCI_VENDOR_ID_ROHM,
+ .device = PCI_DEVICE_ID_ROHM_ML7831_GBE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+ .class_mask = (0xFFFF00)
+ },
/* required last entry */
{0}
};
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index cb6e0b486b1..edd7304773e 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -589,7 +589,7 @@ static void decode_rxts(struct dp83640_private *dp83640,
prune_rx_ts(dp83640);
if (list_empty(&dp83640->rxpool)) {
- pr_warning("dp83640: rx timestamp pool is empty\n");
+ pr_debug("dp83640: rx timestamp pool is empty\n");
goto out;
}
rxts = list_first_entry(&dp83640->rxpool, struct rxts, list);
@@ -612,7 +612,7 @@ static void decode_txts(struct dp83640_private *dp83640,
skb = skb_dequeue(&dp83640->tx_queue);
if (!skb) {
- pr_warning("dp83640: have timestamp but tx_queue empty\n");
+ pr_debug("dp83640: have timestamp but tx_queue empty\n");
return;
}
ns = phy2txts(phy_txts);
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 10e5d985afa..edfa15d2e79 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1465,7 +1465,12 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
continue;
}
- mtu = pch->chan->mtu - hdrlen;
+ /*
+ * hdrlen includes the 2-byte PPP protocol field, but the
+ * MTU counts only the payload excluding the protocol field.
+ * (RFC1661 Section 2)
+ */
+ mtu = pch->chan->mtu - (hdrlen - 2);
if (mtu < 4)
mtu = 4;
if (flen > mtu)
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 1a3033d8e7e..d17d0624c5e 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -40,6 +40,7 @@
#include <linux/clk.h>
#include <linux/phy.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/types.h>
#include <asm/pgtable.h>
#include <asm/system.h>
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 02339b3352e..c2366701792 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -407,6 +407,7 @@ enum rtl_register_content {
RxOK = 0x0001,
/* RxStatusDesc */
+ RxBOVF = (1 << 24),
RxFOVF = (1 << 23),
RxRWT = (1 << 22),
RxRES = (1 << 21),
@@ -682,6 +683,7 @@ struct rtl8169_private {
struct mii_if_info mii;
struct rtl8169_counters counters;
u32 saved_wolopts;
+ u32 opts1_mask;
struct rtl_fw {
const struct firmware *fw;
@@ -710,6 +712,7 @@ MODULE_FIRMWARE(FIRMWARE_8168D_1);
MODULE_FIRMWARE(FIRMWARE_8168D_2);
MODULE_FIRMWARE(FIRMWARE_8168E_1);
MODULE_FIRMWARE(FIRMWARE_8168E_2);
+MODULE_FIRMWARE(FIRMWARE_8168E_3);
MODULE_FIRMWARE(FIRMWARE_8105E_1);
static int rtl8169_open(struct net_device *dev);
@@ -3077,6 +3080,14 @@ static void rtl8169_phy_reset(struct net_device *dev,
netif_err(tp, link, dev, "PHY reset failed\n");
}
+static bool rtl_tbi_enabled(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ return (tp->mac_version == RTL_GIGA_MAC_VER_01) &&
+ (RTL_R8(PHYstatus) & TBI_Enable);
+}
+
static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
@@ -3109,7 +3120,7 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full : 0));
- if (RTL_R8(PHYstatus) & TBI_Enable)
+ if (rtl_tbi_enabled(tp))
netif_info(tp, link, dev, "TBI auto-negotiating\n");
}
@@ -3319,9 +3330,16 @@ static void r810x_phy_power_up(struct rtl8169_private *tp)
static void r810x_pll_power_down(struct rtl8169_private *tp)
{
+ void __iomem *ioaddr = tp->mmio_addr;
+
if (__rtl8169_get_wol(tp) & WAKE_ANY) {
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, 0x0000);
+
+ if (tp->mac_version == RTL_GIGA_MAC_VER_29 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_30)
+ RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
+ AcceptMulticast | AcceptMyPhys);
return;
}
@@ -3417,7 +3435,8 @@ static void r8168_pll_power_down(struct rtl8169_private *tp)
rtl_writephy(tp, MII_BMCR, 0x0000);
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
- tp->mac_version == RTL_GIGA_MAC_VER_33)
+ tp->mac_version == RTL_GIGA_MAC_VER_33 ||
+ tp->mac_version == RTL_GIGA_MAC_VER_34)
RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
AcceptMulticast | AcceptMyPhys);
return;
@@ -3727,8 +3746,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
RTL_W8(Cfg9346, Cfg9346_Lock);
- if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
- (RTL_R8(PHYstatus) & TBI_Enable)) {
+ if (rtl_tbi_enabled(tp)) {
tp->set_speed = rtl8169_set_speed_tbi;
tp->get_settings = rtl8169_gset_tbi;
tp->phy_reset_enable = rtl8169_tbi_reset_enable;
@@ -3777,6 +3795,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->intr_event = cfg->intr_event;
tp->napi_event = cfg->napi_event;
+ tp->opts1_mask = (tp->mac_version != RTL_GIGA_MAC_VER_01) ?
+ ~(RxBOVF | RxFOVF) : ~0;
+
init_timer(&tp->timer);
tp->timer.data = (unsigned long) dev;
tp->timer.function = rtl8169_phy_timer;
@@ -3988,6 +4009,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp)
while (RTL_R8(TxPoll) & NPQ)
udelay(20);
} else if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
+ RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq);
while (!(RTL_R32(TxConfig) & TXCFG_EMPTY))
udelay(100);
} else {
@@ -5314,7 +5336,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
u32 status;
rmb();
- status = le32_to_cpu(desc->opts1);
+ status = le32_to_cpu(desc->opts1) & tp->opts1_mask;
if (status & DescOwn)
break;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index faca764aa21..b59abc706d9 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1050,7 +1050,6 @@ static int efx_init_io(struct efx_nic *efx)
{
struct pci_dev *pci_dev = efx->pci_dev;
dma_addr_t dma_mask = efx->type->max_dma_mask;
- bool use_wc;
int rc;
netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
@@ -1101,21 +1100,8 @@ static int efx_init_io(struct efx_nic *efx)
rc = -EIO;
goto fail3;
}
-
- /* bug22643: If SR-IOV is enabled then tx push over a write combined
- * mapping is unsafe. We need to disable write combining in this case.
- * MSI is unsupported when SR-IOV is enabled, and the firmware will
- * have removed the MSI capability. So write combining is safe if
- * there is an MSI capability.
- */
- use_wc = (!EFX_WORKAROUND_22643(efx) ||
- pci_find_capability(pci_dev, PCI_CAP_ID_MSI));
- if (use_wc)
- efx->membase = ioremap_wc(efx->membase_phys,
- efx->type->mem_map_size);
- else
- efx->membase = ioremap_nocache(efx->membase_phys,
- efx->type->mem_map_size);
+ efx->membase = ioremap_nocache(efx->membase_phys,
+ efx->type->mem_map_size);
if (!efx->membase) {
netif_err(efx, probe, efx->net_dev,
"could not map memory BAR at %llx+%x\n",
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
index cc978803d48..751d1ec112c 100644
--- a/drivers/net/sfc/io.h
+++ b/drivers/net/sfc/io.h
@@ -103,7 +103,6 @@ static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value,
_efx_writed(efx, value->u32[2], reg + 8);
_efx_writed(efx, value->u32[3], reg + 12);
#endif
- wmb();
mmiowb();
spin_unlock_irqrestore(&efx->biu_lock, flags);
}
@@ -126,7 +125,6 @@ static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase,
__raw_writel((__force u32)value->u32[0], membase + addr);
__raw_writel((__force u32)value->u32[1], membase + addr + 4);
#endif
- wmb();
mmiowb();
spin_unlock_irqrestore(&efx->biu_lock, flags);
}
@@ -141,7 +139,6 @@ static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value,
/* No lock required */
_efx_writed(efx, value->u32[0], reg);
- wmb();
}
/* Read a 128-bit CSR, locking as appropriate. */
@@ -152,7 +149,6 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
spin_lock_irqsave(&efx->biu_lock, flags);
value->u32[0] = _efx_readd(efx, reg + 0);
- rmb();
value->u32[1] = _efx_readd(efx, reg + 4);
value->u32[2] = _efx_readd(efx, reg + 8);
value->u32[3] = _efx_readd(efx, reg + 12);
@@ -175,7 +171,6 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
value->u64[0] = (__force __le64)__raw_readq(membase + addr);
#else
value->u32[0] = (__force __le32)__raw_readl(membase + addr);
- rmb();
value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
#endif
spin_unlock_irqrestore(&efx->biu_lock, flags);
@@ -249,7 +244,6 @@ static inline void _efx_writeo_page(struct efx_nic *efx, efx_oword_t *value,
_efx_writed(efx, value->u32[2], reg + 8);
_efx_writed(efx, value->u32[3], reg + 12);
#endif
- wmb();
}
#define efx_writeo_page(efx, value, reg, page) \
_efx_writeo_page(efx, value, \
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 3dd45ed61f0..81a42539746 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -50,20 +50,6 @@ static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
return &nic_data->mcdi;
}
-static inline void
-efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg)
-{
- struct siena_nic_data *nic_data = efx->nic_data;
- value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg);
-}
-
-static inline void
-efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg)
-{
- struct siena_nic_data *nic_data = efx->nic_data;
- __raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg);
-}
-
void efx_mcdi_init(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi;
@@ -84,8 +70,8 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd,
const u8 *inbuf, size_t inlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned pdu = MCDI_PDU(efx);
- unsigned doorbell = MCDI_DOORBELL(efx);
+ unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+ unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
unsigned int i;
efx_dword_t hdr;
u32 xflags, seqno;
@@ -106,28 +92,29 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd,
MCDI_HEADER_SEQ, seqno,
MCDI_HEADER_XFLAGS, xflags);
- efx_mcdi_writed(efx, &hdr, pdu);
+ efx_writed(efx, &hdr, pdu);
for (i = 0; i < inlen; i += 4)
- efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i),
- pdu + 4 + i);
+ _efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
+
+ /* Ensure the payload is written out before the header */
+ wmb();
/* ring the doorbell with a distinctive value */
- EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc);
- efx_mcdi_writed(efx, &hdr, doorbell);
+ _efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
}
static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
- unsigned int pdu = MCDI_PDU(efx);
+ unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
int i;
BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
BUG_ON(outlen & 3 || outlen >= 0x100);
for (i = 0; i < outlen; i += 4)
- efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i);
+ *((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
}
static int efx_mcdi_poll(struct efx_nic *efx)
@@ -135,7 +122,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
unsigned int time, finish;
unsigned int respseq, respcmd, error;
- unsigned int pdu = MCDI_PDU(efx);
+ unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
unsigned int rc, spins;
efx_dword_t reg;
@@ -161,7 +148,8 @@ static int efx_mcdi_poll(struct efx_nic *efx)
time = get_seconds();
- efx_mcdi_readd(efx, &reg, pdu);
+ rmb();
+ efx_readd(efx, &reg, pdu);
/* All 1's indicates that shared memory is in reset (and is
* not a valid header). Wait for it to come out reset before
@@ -188,7 +176,7 @@ static int efx_mcdi_poll(struct efx_nic *efx)
respseq, mcdi->seqno);
rc = EIO;
} else if (error) {
- efx_mcdi_readd(efx, &reg, pdu + 4);
+ efx_readd(efx, &reg, pdu + 4);
switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
#define TRANSLATE_ERROR(name) \
case MC_CMD_ERR_ ## name: \
@@ -222,21 +210,21 @@ out:
/* Test and clear MC-rebooted flag for this port/function */
int efx_mcdi_poll_reboot(struct efx_nic *efx)
{
- unsigned int addr = MCDI_REBOOT_FLAG(efx);
+ unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
efx_dword_t reg;
uint32_t value;
if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
return false;
- efx_mcdi_readd(efx, &reg, addr);
+ efx_readd(efx, &reg, addr);
value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
if (value == 0)
return 0;
EFX_ZERO_DWORD(reg);
- efx_mcdi_writed(efx, &reg, addr);
+ efx_writed(efx, &reg, addr);
if (value == MC_STATUS_DWORD_ASSERT)
return -EINTR;
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index bafa23a6874..3edfbaf5f02 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1936,13 +1936,6 @@ void efx_nic_get_regs(struct efx_nic *efx, void *buf)
size = min_t(size_t, table->step, 16);
- if (table->offset >= efx->type->mem_map_size) {
- /* No longer mapped; return dummy data */
- memcpy(buf, "\xde\xc0\xad\xde", 4);
- buf += table->rows * size;
- continue;
- }
-
for (i = 0; i < table->rows; i++) {
switch (table->step) {
case 4: /* 32-bit register or SRAM */
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
index 4bd1f2839df..7443f99c977 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -143,12 +143,10 @@ static inline struct falcon_board *falcon_board(struct efx_nic *efx)
/**
* struct siena_nic_data - Siena NIC state
* @mcdi: Management-Controller-to-Driver Interface
- * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable.
* @wol_filter_id: Wake-on-LAN packet filter id
*/
struct siena_nic_data {
struct efx_mcdi_iface mcdi;
- void __iomem *mcdi_smem;
int wol_filter_id;
};
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 5735e84c69d..2c3bd93fab5 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -250,26 +250,12 @@ static int siena_probe_nic(struct efx_nic *efx)
efx_reado(efx, &reg, FR_AZ_CS_DEBUG);
efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
- /* Initialise MCDI */
- nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys +
- FR_CZ_MC_TREG_SMEM,
- FR_CZ_MC_TREG_SMEM_STEP *
- FR_CZ_MC_TREG_SMEM_ROWS);
- if (!nic_data->mcdi_smem) {
- netif_err(efx, probe, efx->net_dev,
- "could not map MCDI at %llx+%x\n",
- (unsigned long long)efx->membase_phys +
- FR_CZ_MC_TREG_SMEM,
- FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS);
- rc = -ENOMEM;
- goto fail1;
- }
efx_mcdi_init(efx);
/* Recover from a failed assertion before probing */
rc = efx_mcdi_handle_assertion(efx);
if (rc)
- goto fail2;
+ goto fail1;
/* Let the BMC know that the driver is now in charge of link and
* filter settings. We must do this before we reset the NIC */
@@ -324,7 +310,6 @@ fail4:
fail3:
efx_mcdi_drv_attach(efx, false, NULL);
fail2:
- iounmap(nic_data->mcdi_smem);
fail1:
kfree(efx->nic_data);
return rc;
@@ -404,8 +389,6 @@ static int siena_init_nic(struct efx_nic *efx)
static void siena_remove_nic(struct efx_nic *efx)
{
- struct siena_nic_data *nic_data = efx->nic_data;
-
efx_nic_free_buffer(efx, &efx->irq_status);
siena_reset_hw(efx, RESET_TYPE_ALL);
@@ -415,8 +398,7 @@ static void siena_remove_nic(struct efx_nic *efx)
efx_mcdi_drv_attach(efx, false, NULL);
/* Tear down the private nic state */
- iounmap(nic_data->mcdi_smem);
- kfree(nic_data);
+ kfree(efx->nic_data);
efx->nic_data = NULL;
}
@@ -656,7 +638,8 @@ const struct efx_nic_type siena_a0_nic_type = {
.default_mac_ops = &efx_mcdi_mac_operations,
.revision = EFX_REV_SIENA_A0,
- .mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */
+ .mem_map_size = (FR_CZ_MC_TREG_SMEM +
+ FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index 99ff11400ce..e4dd3a7f304 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -38,8 +38,6 @@
#define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS
/* Legacy interrupt storm when interrupt fifo fills */
#define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA
-/* Write combining and sriov=enabled are incompatible */
-#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA
/* Spurious parity errors in TSORT buffers */
#define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dc3fbf61910..4a1374df608 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6234,12 +6234,10 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
}
-#ifdef BCM_KERNEL_SUPPORTS_8021Q
if (vlan_tx_tag_present(skb)) {
base_flags |= TXD_FLAG_VLAN;
vlan = vlan_tx_tag_get(skb);
}
-#endif
if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
!mss && skb->len > VLAN_ETH_FRAME_LEN)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 15772b1b6a9..13c1f044b40 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -59,6 +59,7 @@
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
@@ -98,6 +99,10 @@ static struct usb_device_id ipheth_table[] = {
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 2d4c0910295..2d394af8217 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -41,7 +41,8 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah,
case ADC_DC_CAL:
/* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
if (!IS_CHAN_B(chan) &&
- !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+ !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
+ IS_CHAN_HT20(chan)))
supported = true;
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 2339728a730..3e69c631ebb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -1514,7 +1514,7 @@ static const u32 ar9300_2p2_mac_core[][2] = {
{0x00008258, 0x00000000},
{0x0000825c, 0x40000000},
{0x00008260, 0x00080922},
- {0x00008264, 0x9bc00010},
+ {0x00008264, 0x9d400010},
{0x00008268, 0xffffffff},
{0x0000826c, 0x0000ffff},
{0x00008270, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 1baca8e4715..fcafec0605f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -671,7 +671,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
REG_WRITE_ARRAY(&ah->iniModesAdditional,
modesIndex, regWrites);
- if (AR_SREV_9300(ah))
+ if (AR_SREV_9330(ah))
REG_WRITE_ARRAY(&ah->iniModesAdditional, 1, regWrites);
if (AR_SREV_9340(ah) && !ah->is_clk_25mhz)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6530694a59a..722967b86cf 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2303,6 +2303,12 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop)
mutex_lock(&sc->mutex);
cancel_delayed_work_sync(&sc->tx_complete_work);
+ if (ah->ah_flags & AH_UNPLUGGED) {
+ ath_dbg(common, ATH_DBG_ANY, "Device has been unplugged!\n");
+ mutex_unlock(&sc->mutex);
+ return;
+ }
+
if (sc->sc_flags & SC_OP_INVALID) {
ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
mutex_unlock(&sc->mutex);
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9a4850154fb..4c21f8cbdeb 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -205,14 +205,22 @@ static void ath_rx_remove_buffer(struct ath_softc *sc,
static void ath_rx_edma_cleanup(struct ath_softc *sc)
{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct ath_buf *bf;
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- if (bf->bf_mpdu)
+ if (bf->bf_mpdu) {
+ dma_unmap_single(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize,
+ DMA_BIDIRECTIONAL);
dev_kfree_skb_any(bf->bf_mpdu);
+ bf->bf_buf_addr = 0;
+ bf->bf_mpdu = NULL;
+ }
}
INIT_LIST_HEAD(&sc->rx.rxbuf);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 26f1ab840cc..e293a7921bf 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1632,7 +1632,8 @@ static void handle_irq_beacon(struct b43_wldev *dev)
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
- !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
+ !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
+ !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
return;
/* This is the bottom half of the asynchronous beacon update. */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 3774dd03474..ef9ad79d1bf 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1903,15 +1903,17 @@ static void ipw2100_down(struct ipw2100_priv *priv)
static int ipw2100_net_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
+
+ return ipw2100_up(priv, 1);
+}
+
+static int ipw2100_wdev_init(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = libipw_priv(dev);
const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct wireless_dev *wdev = &priv->ieee->wdev;
- int ret;
int i;
- ret = ipw2100_up(priv, 1);
- if (ret)
- return ret;
-
memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
/* fill-out priv->ieee->bg_band */
@@ -6350,9 +6352,13 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
"Error calling register_netdev.\n");
goto fail;
}
+ registered = 1;
+
+ err = ipw2100_wdev_init(dev);
+ if (err)
+ goto fail;
mutex_lock(&priv->action_mutex);
- registered = 1;
IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
@@ -6389,7 +6395,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
fail_unlock:
mutex_unlock(&priv->action_mutex);
-
+ wiphy_unregister(priv->ieee->wdev.wiphy);
+ kfree(priv->ieee->bg_band.channels);
fail:
if (dev) {
if (registered)
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 87813c33bdc..4ffebede5e0 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11425,16 +11425,23 @@ static void ipw_bg_down(struct work_struct *work)
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
{
+ int rc = 0;
+ struct ipw_priv *priv = libipw_priv(dev);
+
+ mutex_lock(&priv->mutex);
+ if (ipw_up(priv))
+ rc = -EIO;
+ mutex_unlock(&priv->mutex);
+
+ return rc;
+}
+
+static int ipw_wdev_init(struct net_device *dev)
+{
int i, rc = 0;
struct ipw_priv *priv = libipw_priv(dev);
const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
struct wireless_dev *wdev = &priv->ieee->wdev;
- mutex_lock(&priv->mutex);
-
- if (ipw_up(priv)) {
- rc = -EIO;
- goto out;
- }
memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
@@ -11519,13 +11526,9 @@ static int ipw_net_init(struct net_device *dev)
set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
/* With that information in place, we can now register the wiphy... */
- if (wiphy_register(wdev->wiphy)) {
+ if (wiphy_register(wdev->wiphy))
rc = -EIO;
- goto out;
- }
-
out:
- mutex_unlock(&priv->mutex);
return rc;
}
@@ -11832,14 +11835,22 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
goto out_remove_sysfs;
}
+ err = ipw_wdev_init(net_dev);
+ if (err) {
+ IPW_ERROR("failed to register wireless device\n");
+ goto out_unregister_netdev;
+ }
+
#ifdef CONFIG_IPW2200_PROMISCUOUS
if (rtap_iface) {
err = ipw_prom_alloc(priv);
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
- unregister_netdev(priv->net_dev);
- goto out_remove_sysfs;
+ wiphy_unregister(priv->ieee->wdev.wiphy);
+ kfree(priv->ieee->a_band.channels);
+ kfree(priv->ieee->bg_band.channels);
+ goto out_unregister_netdev;
}
}
#endif
@@ -11851,6 +11862,8 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
return 0;
+ out_unregister_netdev:
+ unregister_netdev(priv->net_dev);
out_remove_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
out_release_irq:
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
index 977bd2477c6..164bcae821f 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
@@ -822,12 +822,15 @@ static void iwl3945_rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
out:
- rs_sta->last_txrate_idx = index;
- if (sband->band == IEEE80211_BAND_5GHZ)
- info->control.rates[0].idx = rs_sta->last_txrate_idx -
- IWL_FIRST_OFDM_RATE;
- else
+ if (sband->band == IEEE80211_BAND_5GHZ) {
+ if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE))
+ index = IWL_FIRST_OFDM_RATE;
+ rs_sta->last_txrate_idx = index;
+ info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE;
+ } else {
+ rs_sta->last_txrate_idx = index;
info->control.rates[0].idx = rs_sta->last_txrate_idx;
+ }
IWL_DEBUG_RATE(priv, "leave: %d\n", index);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index 35cd2537e7f..e5971fe9d16 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -937,7 +937,7 @@ void iwl_legacy_irq_handle_error(struct iwl_priv *priv)
&priv->contexts[IWL_RXON_CTX_BSS]);
#endif
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
/* Keep the restart process from trying to send host
* commands by clearing the INIT status bit */
@@ -1746,7 +1746,7 @@ int iwl_legacy_force_reset(struct iwl_priv *priv, bool external)
/* Set the FW error flag -- cleared on iwl_down */
set_bit(STATUS_FW_ERROR, &priv->status);
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
/*
* Keep the restart process from trying to send host
* commands by clearing the INIT status bit
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
index 62b4b09122c..ce1fc9feb61 100644
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
@@ -167,7 +167,7 @@ int iwl_legacy_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
goto out;
}
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
!test_bit(STATUS_HCMD_ACTIVE, &priv->status),
HOST_COMPLETE_TIMEOUT);
if (!ret) {
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
index 4fff995c6f3..ef9e268bf8a 100644
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-tx.c
@@ -625,6 +625,8 @@ iwl_legacy_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
+ txq->time_stamp = jiffies;
+
pci_unmap_single(priv->pci_dev,
dma_unmap_addr(meta, mapping),
dma_unmap_len(meta, len),
@@ -645,7 +647,7 @@ iwl_legacy_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
iwl_legacy_get_cmd_string(cmd->hdr.cmd));
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/* Mark as unmapped */
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index 795826a014e..66ee15629a7 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -841,7 +841,7 @@ static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/**
@@ -2269,7 +2269,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
iwl3945_reg_txpower_periodic(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
return;
@@ -2300,7 +2300,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
iwl_legacy_clear_driver_stations(priv);
/* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
+ wake_up_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
@@ -2853,7 +2853,7 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index 14334668034..aa0c2539761 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -576,7 +576,7 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
/**
@@ -926,7 +926,7 @@ static void iwl4965_irq_tasklet(struct iwl_priv *priv)
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
}
if (inta & ~handled) {
@@ -1795,7 +1795,7 @@ static void iwl4965_alive_start(struct iwl_priv *priv)
iwl4965_rf_kill_ct_config(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
+ wake_up(&priv->wait_command_queue);
iwl_legacy_power_update_mode(priv, true);
IWL_DEBUG_INFO(priv, "Updated power mode\n");
@@ -1828,7 +1828,7 @@ static void __iwl4965_down(struct iwl_priv *priv)
iwl_legacy_clear_driver_stations(priv);
/* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
+ wake_up_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
@@ -2266,7 +2266,7 @@ int iwl4965_mac_start(struct ieee80211_hw *hw)
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ ret = wait_event_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index a895a099d08..56211006a18 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -167,7 +167,7 @@ static int iwlagn_set_temperature_offset_calib(struct iwl_priv *priv)
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
- memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(offset_calib));
+ memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index b0ae4de7f08..f9c3cd95d61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2140,7 +2140,12 @@ static int iwl_mac_setup_register(struct iwl_priv *priv,
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+ /*
+ * Including the following line will crash some AP's. This
+ * workaround removes the stimulus which causes the crash until
+ * the AP software can be fixed.
hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+ */
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd6937e9705..77e528f5db8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -405,31 +405,33 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
mutex_lock(&priv->mutex);
- if (test_bit(STATUS_SCANNING, &priv->status) &&
- priv->scan_type != IWL_SCAN_NORMAL) {
- IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
- ret = -EAGAIN;
- goto out_unlock;
- }
-
- /* mac80211 will only ask for one band at a time */
- priv->scan_request = req;
- priv->scan_vif = vif;
-
/*
* If an internal scan is in progress, just set
* up the scan_request as per above.
*/
if (priv->scan_type != IWL_SCAN_NORMAL) {
- IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
+ IWL_DEBUG_SCAN(priv,
+ "SCAN request during internal scan - defer\n");
+ priv->scan_request = req;
+ priv->scan_vif = vif;
ret = 0;
- } else
+ } else {
+ priv->scan_request = req;
+ priv->scan_vif = vif;
+ /*
+ * mac80211 will only ask for one band at a time
+ * so using channels[0] here is ok
+ */
ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
req->channels[0]->band);
+ if (ret) {
+ priv->scan_request = NULL;
+ priv->scan_vif = NULL;
+ }
+ }
IWL_DEBUG_MAC80211(priv, "leave\n");
-out_unlock:
mutex_unlock(&priv->mutex);
return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
index a6b2b1db0b1..222d410c586 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
@@ -771,6 +771,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
+ txq->time_stamp = jiffies;
+
iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
/* Input error checking is done when commands are added to queue. */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index ef67f6786a8..0019dfd8fb0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3697,14 +3697,15 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
/* Apparently the data is read from end to start */
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3,
- (u32 *)&rt2x00dev->eeprom[i]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2,
- (u32 *)&rt2x00dev->eeprom[i + 2]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1,
- (u32 *)&rt2x00dev->eeprom[i + 4]);
- rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0,
- (u32 *)&rt2x00dev->eeprom[i + 6]);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, &reg);
+ /* The returned value is in CPU order, but eeprom is le */
+ rt2x00dev->eeprom[i] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, &reg);
+ *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, &reg);
+ *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
+ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, &reg);
+ *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
mutex_unlock(&rt2x00dev->csr_mutex);
}
@@ -3870,19 +3871,23 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
return -ENODEV;
}
- if (!rt2x00_rf(rt2x00dev, RF2820) &&
- !rt2x00_rf(rt2x00dev, RF2850) &&
- !rt2x00_rf(rt2x00dev, RF2720) &&
- !rt2x00_rf(rt2x00dev, RF2750) &&
- !rt2x00_rf(rt2x00dev, RF3020) &&
- !rt2x00_rf(rt2x00dev, RF2020) &&
- !rt2x00_rf(rt2x00dev, RF3021) &&
- !rt2x00_rf(rt2x00dev, RF3022) &&
- !rt2x00_rf(rt2x00dev, RF3052) &&
- !rt2x00_rf(rt2x00dev, RF3320) &&
- !rt2x00_rf(rt2x00dev, RF5370) &&
- !rt2x00_rf(rt2x00dev, RF5390)) {
- ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ switch (rt2x00dev->chip.rf) {
+ case RF2820:
+ case RF2850:
+ case RF2720:
+ case RF2750:
+ case RF3020:
+ case RF2020:
+ case RF3021:
+ case RF3022:
+ case RF3052:
+ case RF3320:
+ case RF5370:
+ case RF5390:
+ break;
+ default:
+ ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
+ rt2x00dev->chip.rf);
return -ENODEV;
}
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 1bdc1aa305c..04c4e9eb6ee 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -610,6 +610,11 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
+
+ /* reset sec info */
+ rtl_cam_reset_sec_info(hw);
+
+ rtl_cam_reset_all_entry(hw);
mac->vendor = PEER_UNKNOWN;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
@@ -1063,6 +1068,9 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
*or clear all entry here.
*/
rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
+
+ rtl_cam_reset_sec_info(hw);
+
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index 906e7aa55bc..3e52a549622 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -549,15 +549,16 @@ void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
(tcb_desc->rts_use_shortpreamble ? 1 : 0)
: (tcb_desc->rts_use_shortgi ? 1 : 0)));
if (mac->bw_40) {
- if (tcb_desc->packet_bw) {
+ if (rate_flag & IEEE80211_TX_RC_DUP_DATA) {
SET_TX_DESC_DATA_BW(txdesc, 1);
SET_TX_DESC_DATA_SC(txdesc, 3);
+ } else if(rate_flag & IEEE80211_TX_RC_40_MHZ_WIDTH){
+ SET_TX_DESC_DATA_BW(txdesc, 1);
+ SET_TX_DESC_DATA_SC(txdesc, mac->cur_40_prime_sc);
} else {
SET_TX_DESC_DATA_BW(txdesc, 0);
- if (rate_flag & IEEE80211_TX_RC_DUP_DATA)
- SET_TX_DESC_DATA_SC(txdesc,
- mac->cur_40_prime_sc);
- }
+ SET_TX_DESC_DATA_SC(txdesc, 0);
+ }
} else {
SET_TX_DESC_DATA_BW(txdesc, 0);
SET_TX_DESC_DATA_SC(txdesc, 0);
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 8b1cef0ffde..4bf3cf457ef 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -863,6 +863,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb,
u8 tid = 0;
u16 seq_number = 0;
+ memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
if (ieee80211_is_auth(fc)) {
RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
rtl_ips_nic_on(hw);
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 0ca86f9ec4e..182562952c7 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -327,12 +327,12 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
xenvif_get(vif);
rtnl_lock();
- if (netif_running(vif->dev))
- xenvif_up(vif);
if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
dev_set_mtu(vif->dev, ETH_DATA_LEN);
netdev_update_features(vif->dev);
netif_carrier_on(vif->dev);
+ if (netif_running(vif->dev))
+ xenvif_up(vif);
rtnl_unlock();
return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4e84fd4a431..e9651f0a881 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -77,7 +77,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
-enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE;
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
/*
* The default CLS is used if arch didn't set CLS explicitly and not
@@ -3568,10 +3568,14 @@ static int __init pci_setup(char *str)
pci_hotplug_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "hpmemsize=", 10)) {
pci_hotplug_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
+ pcie_bus_config = PCIE_BUS_TUNE_OFF;
} else if (!strncmp(str, "pcie_bus_safe", 13)) {
pcie_bus_config = PCIE_BUS_SAFE;
} else if (!strncmp(str, "pcie_bus_perf", 13)) {
pcie_bus_config = PCIE_BUS_PERFORMANCE;
+ } else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
+ pcie_bus_config = PCIE_BUS_PEER2PEER;
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1187ff31d8..6ab6bd3df4b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1351,7 +1351,8 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data)
* will occur as normal.
*/
if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
- dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))
+ (dev->bus->self &&
+ dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)))
*smpss = 0;
if (*smpss > dev->pcie_mpss)
@@ -1457,12 +1458,24 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
*/
void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss)
{
- u8 smpss = mpss;
+ u8 smpss;
if (!pci_is_pcie(bus->self))
return;
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+ return;
+
+ /* FIXME - Peer to peer DMA is possible, though the endpoint would need
+ * to be aware to the MPS of the destination. To work around this,
+ * simply force the MPS of the entire system to the smallest possible.
+ */
+ if (pcie_bus_config == PCIE_BUS_PEER2PEER)
+ smpss = 0;
+
if (pcie_bus_config == PCIE_BUS_SAFE) {
+ smpss = mpss;
+
pcie_find_smpss(bus->self, &smpss);
pci_walk_bus(bus, pcie_find_smpss, &smpss);
}
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index e956f659089..66ab92cf310 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -17,7 +17,7 @@
#include <asm/mach-types.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/vpac270.h>
#include "soc_common.h"
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index 2dd3c016327..d93a9608b1f 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -35,6 +35,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#include <linux/sched.h>
#include <linux/workqueue.h>
/* DryIce Register Definitions */
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 4e7c04e773e..7639ab906f0 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -51,6 +51,27 @@ static enum s3c_cpu_type s3c_rtc_cpu_type;
static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
+static void s3c_rtc_alarm_clk_enable(bool enable)
+{
+ static DEFINE_SPINLOCK(s3c_rtc_alarm_clk_lock);
+ static bool alarm_clk_enabled;
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&s3c_rtc_alarm_clk_lock, irq_flags);
+ if (enable) {
+ if (!alarm_clk_enabled) {
+ clk_enable(rtc_clk);
+ alarm_clk_enabled = true;
+ }
+ } else {
+ if (alarm_clk_enabled) {
+ clk_disable(rtc_clk);
+ alarm_clk_enabled = false;
+ }
+ }
+ spin_unlock_irqrestore(&s3c_rtc_alarm_clk_lock, irq_flags);
+}
+
/* IRQ Handlers */
static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
@@ -64,6 +85,9 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
clk_disable(rtc_clk);
+
+ s3c_rtc_alarm_clk_enable(false);
+
return IRQ_HANDLED;
}
@@ -97,6 +121,8 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
clk_disable(rtc_clk);
+ s3c_rtc_alarm_clk_enable(enabled);
+
return 0;
}
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index cbde448f994..eb3140ee821 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -654,8 +654,8 @@ static struct io_subchannel_private console_priv;
static int console_subchannel_in_use;
/*
- * Use tpi to get a pending interrupt, call the interrupt handler and
- * return a pointer to the subchannel structure.
+ * Use cio_tpi to get a pending interrupt and call the interrupt handler.
+ * Return non-zero if an interrupt was processed, zero otherwise.
*/
static int cio_tpi(void)
{
@@ -667,6 +667,10 @@ static int cio_tpi(void)
tpi_info = (struct tpi_info *)&S390_lowcore.subchannel_id;
if (tpi(NULL) != 1)
return 0;
+ if (tpi_info->adapter_IO) {
+ do_adapter_IO(tpi_info->isc);
+ return 1;
+ }
irb = (struct irb *)&S390_lowcore.irb;
/* Store interrupt response block to lowcore. */
if (tsch(tpi_info->schid, irb) != 0)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b7bd5b0cc7a..3868ab2397c 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1800,10 +1800,12 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
twa_free_request_id(tw_dev, request_id);
+ twa_unmap_scsi_data(tw_dev, request_id);
break;
case 1:
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
+ twa_unmap_scsi_data(tw_dev, request_id);
SCpnt->result = (DID_ERROR << 16);
done(SCpnt);
retval = 0;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8d9dae89f06..3878b739508 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -837,6 +837,7 @@ config SCSI_ISCI
# (temporary): known alpha quality driver
depends on EXPERIMENTAL
select SCSI_SAS_LIBSAS
+ select SCSI_SAS_HOST_SMP
---help---
This driver supports the 6Gb/s SAS capabilities of the storage
control unit found in the Intel(R) C600 series chipset.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 3c08f5352b2..6153a66a8a3 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -88,7 +88,7 @@ obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
-obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/
+obj-$(CONFIG_SCSI_QLA_ISCSI) += libiscsi.o qla4xxx/
obj-$(CONFIG_SCSI_LPFC) += lpfc/
obj-$(CONFIG_SCSI_BFA_FC) += bfa/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index e7d0d47b918..e5f2d7d9002 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1283,6 +1283,8 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
kfree(aac->queues);
aac->queues = NULL;
free_irq(aac->pdev->irq, aac);
+ if (aac->msi)
+ pci_disable_msi(aac->pdev);
kfree(aac->fsa_dev);
aac->fsa_dev = NULL;
quirks = aac_get_driver_ident(index)->quirks;
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 9ae80cd5953..dba72a4e6a1 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -563,7 +563,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
nopout_wqe->itt = ((u16)task->itt |
(ISCSI_TASK_TYPE_MPATH <<
ISCSI_TMF_REQUEST_TYPE_SHIFT));
- nopout_wqe->ttt = nopout_hdr->ttt;
+ nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
nopout_wqe->flags = 0;
if (!unsol)
nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index bd22041e278..f5864485033 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -913,7 +913,7 @@ static void l2t_put(struct cxgbi_sock *csk)
struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev;
if (csk->l2t) {
- l2t_release(L2DATA(t3dev), csk->l2t);
+ l2t_release(t3dev, csk->l2t);
csk->l2t = NULL;
cxgbi_sock_put(csk);
}
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ba710e350ac..5d0e9a24ae9 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -432,6 +432,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
u8 flogi_maddr[ETH_ALEN];
const struct net_device_ops *ops;
+ rtnl_lock();
+
/*
* Don't listen for Ethernet packets anymore.
* synchronize_net() ensures that the packet handlers are not running
@@ -461,6 +463,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
" specific feature for LLD.\n");
}
+ rtnl_unlock();
+
/* Release the self-reference taken during fcoe_interface_create() */
fcoe_interface_put(fcoe);
}
@@ -1951,11 +1955,8 @@ static void fcoe_destroy_work(struct work_struct *work)
fcoe_if_destroy(port->lport);
/* Do not tear down the fcoe interface for NPIV port */
- if (!npiv) {
- rtnl_lock();
+ if (!npiv)
fcoe_interface_cleanup(fcoe);
- rtnl_unlock();
- }
mutex_unlock(&fcoe_config_mutex);
}
@@ -2009,8 +2010,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
rc = -EIO;
+ rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nodev;
+ goto out_nortnl;
}
/* Make this the "master" N_Port */
@@ -2027,6 +2029,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
out_nodev:
rtnl_unlock();
+out_nortnl:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ec61bdb833a..b200b736b00 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -676,6 +676,16 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
removed[*nremoved] = h->dev[entry];
(*nremoved)++;
+
+ /*
+ * New physical devices won't have target/lun assigned yet
+ * so we need to preserve the values in the slot we are replacing.
+ */
+ if (new_entry->target == -1) {
+ new_entry->target = h->dev[entry]->target;
+ new_entry->lun = h->dev[entry]->lun;
+ }
+
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
@@ -1548,10 +1558,17 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
}
static int hpsa_update_device_info(struct ctlr_info *h,
- unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+ unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
+ unsigned char *is_OBDR_device)
{
-#define OBDR_TAPE_INQ_SIZE 49
+
+#define OBDR_SIG_OFFSET 43
+#define OBDR_TAPE_SIG "$DR-10"
+#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
+#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
+
unsigned char *inq_buff;
+ unsigned char *obdr_sig;
inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
if (!inq_buff)
@@ -1583,6 +1600,16 @@ static int hpsa_update_device_info(struct ctlr_info *h,
else
this_device->raid_level = RAID_UNKNOWN;
+ if (is_OBDR_device) {
+ /* See if this is a One-Button-Disaster-Recovery device
+ * by looking for "$DR-10" at offset 43 in inquiry data.
+ */
+ obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
+ *is_OBDR_device = (this_device->devtype == TYPE_ROM &&
+ strncmp(obdr_sig, OBDR_TAPE_SIG,
+ OBDR_SIG_LEN) == 0);
+ }
+
kfree(inq_buff);
return 0;
@@ -1716,7 +1743,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
return 0;
}
- if (hpsa_update_device_info(h, scsi3addr, this_device))
+ if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
return 0;
(*nmsa2xxx_enclosures)++;
hpsa_set_bus_target_lun(this_device, bus, target, 0);
@@ -1808,7 +1835,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
*/
struct ReportLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
- unsigned char *inq_buff = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
u32 ndev_allocated = 0;
@@ -1824,11 +1850,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
- inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
- if (!currentsd || !physdev_list || !logdev_list ||
- !inq_buff || !tmpdevice) {
+ if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
@@ -1863,7 +1887,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
/* adjust our table of devices */
nmsa2xxx_enclosures = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
- u8 *lunaddrbytes;
+ u8 *lunaddrbytes, is_OBDR = 0;
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
@@ -1874,7 +1898,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
continue;
/* Get device type, vendor, model, device id */
- if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+ if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+ &is_OBDR))
continue; /* skip it if we can't talk to it. */
figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
tmpdevice);
@@ -1898,7 +1923,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
hpsa_set_bus_target_lun(this_device, bus, target, lun);
switch (this_device->devtype) {
- case TYPE_ROM: {
+ case TYPE_ROM:
/* We don't *really* support actual CD-ROM devices,
* just "One Button Disaster Recovery" tape drive
* which temporarily pretends to be a CD-ROM drive.
@@ -1906,15 +1931,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
* device by checking for "$DR-10" in bytes 43-48 of
* the inquiry data.
*/
- char obdr_sig[7];
-#define OBDR_TAPE_SIG "$DR-10"
- strncpy(obdr_sig, &inq_buff[43], 6);
- obdr_sig[6] = '\0';
- if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
- /* Not OBDR device, ignore it. */
- break;
- }
- ncurrent++;
+ if (is_OBDR)
+ ncurrent++;
break;
case TYPE_DISK:
if (i < nphysicals)
@@ -1947,7 +1965,6 @@ out:
for (i = 0; i < ndev_allocated; i++)
kfree(currentsd[i]);
kfree(currentsd);
- kfree(inq_buff);
kfree(physdev_list);
kfree(logdev_list);
}
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 26072f1e985..6981b773a88 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -531,6 +531,9 @@ static void sci_controller_process_completions(struct isci_host *ihost)
break;
case SCU_COMPLETION_TYPE_EVENT:
+ sci_controller_event_completion(ihost, ent);
+ break;
+
case SCU_COMPLETION_TYPE_NOTIFY: {
event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
(SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
@@ -1091,6 +1094,7 @@ static void isci_host_completion_routine(unsigned long data)
struct isci_request *request;
struct isci_request *next_request;
struct sas_task *task;
+ u16 active;
INIT_LIST_HEAD(&completed_request_list);
INIT_LIST_HEAD(&errored_request_list);
@@ -1181,6 +1185,13 @@ static void isci_host_completion_routine(unsigned long data)
}
}
+ /* the coalesence timeout doubles at each encoding step, so
+ * update it based on the ilog2 value of the outstanding requests
+ */
+ active = isci_tci_active(ihost);
+ writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+ SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+ &ihost->smu_registers->interrupt_coalesce_control);
}
/**
@@ -1471,7 +1482,7 @@ static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm)
struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
/* set the default interrupt coalescence number and timeout value. */
- sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
}
static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 062101a39f7..9f33831a2f0 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -369,6 +369,9 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
+/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
+#define ISCI_COALESCE_BASE 9
+
/* expander attached sata devices require 3 rnc slots */
static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
{
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 61e0d09e2b5..29aa34efb0f 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -59,10 +59,19 @@
#include <linux/firmware.h>
#include <linux/efi.h>
#include <asm/string.h>
+#include <scsi/scsi_host.h>
#include "isci.h"
#include "task.h"
#include "probe_roms.h"
+#define MAJ 1
+#define MIN 0
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
static struct scsi_transport_template *isci_transport_template;
static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
@@ -113,6 +122,22 @@ unsigned char max_concurr_spinup = 1;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+ &dev_attr_isci_id,
+ NULL
+};
+
static struct scsi_host_template isci_sht = {
.module = THIS_MODULE,
@@ -138,6 +163,7 @@ static struct scsi_host_template isci_sht = {
.slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
+ .shost_attrs = isci_host_attrs,
};
static struct sas_domain_function_template isci_transport_ops = {
@@ -232,17 +258,6 @@ static int isci_register_sas_ha(struct isci_host *isci_host)
return 0;
}
-static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
- struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
- struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
-}
-
-static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
-
static void isci_unregister(struct isci_host *isci_host)
{
struct Scsi_Host *shost;
@@ -251,7 +266,6 @@ static void isci_unregister(struct isci_host *isci_host)
return;
shost = isci_host->shost;
- device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
sas_unregister_ha(&isci_host->sas_ha);
@@ -415,14 +429,8 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
if (err)
goto err_shost_remove;
- err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
- if (err)
- goto err_unregister_ha;
-
return isci_host;
- err_unregister_ha:
- sas_unregister_ha(&(isci_host->sas_ha));
err_shost_remove:
scsi_remove_host(shost);
err_shost:
@@ -540,7 +548,8 @@ static __init int isci_init(void)
{
int err;
- pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+ pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+ DRV_NAME, DRV_VERSION);
isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
if (!isci_transport_template)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 79313a7a235..430fc8ff014 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
+ u32 sp_timeouts = 0;
iphy->link_layer_registers = reg;
@@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+ /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+ /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can
+ * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+ */
+ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+ writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
if (is_a2(ihost->pdev)) {
/* Program the max ARB time for the PHY to 700us so we inter-operate with
* the PMC expander which shuts down PHYs if the expander PHY generates too
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 9b266c7428e..00afc738bbe 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -1299,6 +1299,18 @@ struct scu_transport_layer_registers {
#define SCU_AFE_XCVRCR_OFFSET 0x00DC
#define SCU_AFE_LUTCR_OFFSET 0x00E0
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL)
+
+#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value)
+
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index a46e07ac789..b5d3a8c4d32 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -732,12 +732,20 @@ sci_io_request_terminate(struct isci_request *ireq)
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
return SCI_SUCCESS;
case SCI_REQ_TASK_WAIT_TC_RESP:
+ /* The task frame was already confirmed to have been
+ * sent by the SCU HW. Since the state machine is
+ * now only waiting for the task response itself,
+ * abort the request and complete it immediately
+ * and don't wait for the task response.
+ */
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
return SCI_SUCCESS;
case SCI_REQ_ABORTING:
- sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
- return SCI_SUCCESS;
+ /* If a request has a termination requested twice, return
+ * a failure indication, since HW confirmation of the first
+ * abort is still outstanding.
+ */
case SCI_REQ_COMPLETED:
default:
dev_warn(&ireq->owning_controller->pdev->dev,
@@ -2399,22 +2407,19 @@ static void isci_task_save_for_upper_layer_completion(
}
}
-static void isci_request_process_stp_response(struct sas_task *task,
- void *response_buffer)
+static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
{
- struct dev_to_host_fis *d2h_reg_fis = response_buffer;
struct task_status_struct *ts = &task->task_status;
struct ata_task_resp *resp = (void *)&ts->buf[0];
- resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
- memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+ resp->frame_len = sizeof(*fis);
+ memcpy(resp->ending_fis, fis, sizeof(*fis));
ts->buf_valid_size = sizeof(*resp);
- /**
- * If the device fault bit is set in the status register, then
+ /* If the device fault bit is set in the status register, then
* set the sense data and return.
*/
- if (d2h_reg_fis->status & ATA_DF)
+ if (fis->status & ATA_DF)
ts->stat = SAS_PROTO_RESPONSE;
else
ts->stat = SAM_STAT_GOOD;
@@ -2428,7 +2433,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
{
struct sas_task *task = isci_request_access_task(request);
struct ssp_response_iu *resp_iu;
- void *resp_buf;
unsigned long task_flags;
struct isci_remote_device *idev = isci_lookup_device(task->dev);
enum service_response response = SAS_TASK_UNDELIVERED;
@@ -2565,9 +2569,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
task);
if (sas_protocol_ata(task->task_proto)) {
- resp_buf = &request->stp.rsp;
- isci_request_process_stp_response(task,
- resp_buf);
+ isci_process_stp_response(task, &request->stp.rsp);
} else if (SAS_PROTOCOL_SSP == task->task_proto) {
/* crack the iu response buffer. */
diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c
index e9e1e2abacb..16f88ab939c 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.c
+++ b/drivers/scsi/isci/unsolicited_frame_control.c
@@ -72,7 +72,7 @@ int sci_unsolicited_frame_control_construct(struct isci_host *ihost)
*/
buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
- size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+ size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]);
/*
* The Unsolicited Frame buffers are set at the start of the UF
diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h
index 31cb9506f52..75d896686f5 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.h
+++ b/drivers/scsi/isci/unsolicited_frame_control.h
@@ -214,7 +214,7 @@ struct sci_uf_address_table_array {
* starting address of the UF address table.
* 64-bit pointers are required by the hardware.
*/
- dma_addr_t *array;
+ u64 *array;
/**
* This field specifies the physical address location for the UF
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 01ff082dc34..d261e982a2f 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -494,6 +494,9 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
*/
error = lport->tt.frame_send(lport, fp);
+ if (fh->fh_type == FC_TYPE_BLS)
+ return error;
+
/*
* Update the exchange and sequence flags,
* assuming all frames for the sequence have been sent.
@@ -575,42 +578,35 @@ static void fc_seq_set_resp(struct fc_seq *sp,
}
/**
- * fc_seq_exch_abort() - Abort an exchange and sequence
- * @req_sp: The sequence to be aborted
+ * fc_exch_abort_locked() - Abort an exchange
+ * @ep: The exchange to be aborted
* @timer_msec: The period of time to wait before aborting
*
- * Generally called because of a timeout or an abort from the upper layer.
+ * Locking notes: Called with exch lock held
+ *
+ * Return value: 0 on success else error code
*/
-static int fc_seq_exch_abort(const struct fc_seq *req_sp,
- unsigned int timer_msec)
+static int fc_exch_abort_locked(struct fc_exch *ep,
+ unsigned int timer_msec)
{
struct fc_seq *sp;
- struct fc_exch *ep;
struct fc_frame *fp;
int error;
- ep = fc_seq_exch(req_sp);
-
- spin_lock_bh(&ep->ex_lock);
if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) ||
- ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) {
- spin_unlock_bh(&ep->ex_lock);
+ ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP))
return -ENXIO;
- }
/*
* Send the abort on a new sequence if possible.
*/
sp = fc_seq_start_next_locked(&ep->seq);
- if (!sp) {
- spin_unlock_bh(&ep->ex_lock);
+ if (!sp)
return -ENOMEM;
- }
ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
if (timer_msec)
fc_exch_timer_set_locked(ep, timer_msec);
- spin_unlock_bh(&ep->ex_lock);
/*
* If not logged into the fabric, don't send ABTS but leave
@@ -633,6 +629,28 @@ static int fc_seq_exch_abort(const struct fc_seq *req_sp,
}
/**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp: The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ *
+ * Return value: 0 on success else error code
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+ unsigned int timer_msec)
+{
+ struct fc_exch *ep;
+ int error;
+
+ ep = fc_seq_exch(req_sp);
+ spin_lock_bh(&ep->ex_lock);
+ error = fc_exch_abort_locked(ep, timer_msec);
+ spin_unlock_bh(&ep->ex_lock);
+ return error;
+}
+
+/**
* fc_exch_timeout() - Handle exchange timer expiration
* @work: The work_struct identifying the exchange that timed out
*/
@@ -1715,6 +1733,7 @@ static void fc_exch_reset(struct fc_exch *ep)
int rc = 1;
spin_lock_bh(&ep->ex_lock);
+ fc_exch_abort_locked(ep, 0);
ep->state |= FC_EX_RST_CLEANUP;
if (cancel_delayed_work(&ep->timeout_work))
atomic_dec(&ep->ex_refcnt); /* drop hold for timer */
@@ -1962,6 +1981,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
struct fc_exch *ep;
struct fc_seq *sp = NULL;
struct fc_frame_header *fh;
+ struct fc_fcp_pkt *fsp = NULL;
int rc = 1;
ep = fc_exch_alloc(lport, fp);
@@ -1984,8 +2004,10 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
fc_exch_setup_hdr(ep, fp, ep->f_ctl);
sp->cnt++;
- if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
+ if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) {
+ fsp = fr_fsp(fp);
fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+ }
if (unlikely(lport->tt.frame_send(lport, fp)))
goto err;
@@ -1999,7 +2021,8 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
spin_unlock_bh(&ep->ex_lock);
return sp;
err:
- fc_fcp_ddp_done(fr_fsp(fp));
+ if (fsp)
+ fc_fcp_ddp_done(fsp);
rc = fc_exch_done_locked(ep);
spin_unlock_bh(&ep->ex_lock);
if (!rc)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index afb63c84314..4c41ee816f0 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2019,6 +2019,11 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd)
struct fc_fcp_internal *si;
int rc = FAILED;
unsigned long flags;
+ int rval;
+
+ rval = fc_block_scsi_eh(sc_cmd);
+ if (rval)
+ return rval;
lport = shost_priv(sc_cmd->device->host);
if (lport->state != LPORT_ST_READY)
@@ -2068,9 +2073,9 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
int rc = FAILED;
int rval;
- rval = fc_remote_port_chkready(rport);
+ rval = fc_block_scsi_eh(sc_cmd);
if (rval)
- goto out;
+ return rval;
lport = shost_priv(sc_cmd->device->host);
@@ -2116,6 +2121,8 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
FC_SCSI_DBG(lport, "Resetting host\n");
+ fc_block_scsi_eh(sc_cmd);
+
lport->tt.lport_reset(lport);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e55ed9cf23f..628f347404f 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -88,6 +88,7 @@
*/
#include <linux/timer.h>
+#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
@@ -1029,8 +1030,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport)
FCH_EVT_LIPRESET, 0);
fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
- if (lport->link_up)
+ if (lport->link_up) {
+ /*
+ * Wait upto resource allocation time out before
+ * doing re-login since incomplete FIP exchanged
+ * from last session may collide with exchanges
+ * in new session.
+ */
+ msleep(lport->r_a_tov);
fc_lport_enter_flogi(lport);
+ }
}
/**
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f84084bba2f..c9e3dc024bc 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1721,7 +1721,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
list_for_each_entry(ch, &ex->children, siblings) {
if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
res = sas_find_bcast_dev(ch, src_dev);
- if (src_dev)
+ if (*src_dev)
return res;
}
}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7836eb01c7f..a31e05f3bfd 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1786,13 +1786,16 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
}
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_user, vha, 0x7082,
"Registered for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(vha->host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2155071f310..d79cd8a5f83 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -8,24 +8,24 @@
/*
* Table for showing the current message id in use for particular level
* Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * | Level | Last Value Used |
- * -----------------------------------------------------
- * | Module Init and Probe | 0x0116 |
- * | Mailbox commands | 0x111e |
- * | Device Discovery | 0x2083 |
- * | Queue Command and IO tracing | 0x302e |
- * | DPC Thread | 0x401c |
- * | Async Events | 0x5059 |
- * | Timer Routines | 0x600d |
- * | User Space Interactions | 0x709c |
- * | Task Management | 0x8043 |
- * | AER/EEH | 0x900f |
- * | Virtual Port | 0xa007 |
- * | ISP82XX Specific | 0xb027 |
- * | MultiQ | 0xc00b |
- * | Misc | 0xd00b |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * | Level | Last Value Used | Holes |
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe | 0x0116 | |
+ * | Mailbox commands | 0x1126 | |
+ * | Device Discovery | 0x2083 | |
+ * | Queue Command and IO tracing | 0x302e | 0x3008 |
+ * | DPC Thread | 0x401c | |
+ * | Async Events | 0x5059 | |
+ * | Timer Routines | 0x600d | |
+ * | User Space Interactions | 0x709d | |
+ * | Task Management | 0x8041 | |
+ * | AER/EEH | 0x900f | |
+ * | Virtual Port | 0xa007 | |
+ * | ISP82XX Specific | 0xb04f | |
+ * | MultiQ | 0xc00b | |
+ * | Misc | 0xd00b | |
+ * ----------------------------------------------------------------------
*/
#include "qla_def.h"
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index cc5a79259d3..a03eaf40f37 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2529,6 +2529,7 @@ struct qla_hw_data {
#define DT_ISP8021 BIT_14
#define DT_ISP_LAST (DT_ISP8021 << 1)
+#define DT_T10_PI BIT_25
#define DT_IIDMA BIT_26
#define DT_FWI2 BIT_27
#define DT_ZIO_SUPPORTED BIT_28
@@ -2572,6 +2573,7 @@ struct qla_hw_data {
#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))
#define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
+#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI)
#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 691783abfb6..aa69486dc06 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -537,6 +537,11 @@ struct sts_entry_24xx {
/*
* If DIF Error is set in comp_status, these additional fields are
* defined:
+ *
+ * !!! NOTE: Firmware sends expected/actual DIF data in big endian
+ * format; but all of the "data" field gets swab32-d in the beginning
+ * of qla2x00_status_entry().
+ *
* &data[10] : uint8_t report_runt_bg[2]; - computed guard
* &data[12] : uint8_t actual_dif[8]; - DIF Data received
* &data[20] : uint8_t expected_dif[8]; - DIF Data computed
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index def694271bf..37da04d3db2 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3838,15 +3838,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
req = vha->req;
rsp = req->rsp;
- atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
if (vha->flags.online) {
if (!(rval = qla2x00_fw_ready(vha))) {
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- atomic_set(&vha->loop_state, LOOP_UPDATE);
-
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0,
MK_SYNC_ALL);
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index d2e904bc21c..9902834e0b7 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -102,3 +102,32 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state)
fcport->d_id.b.al_pa);
}
}
+
+static inline int
+qla2x00_hba_err_chk_enabled(srb_t *sp)
+{
+ /*
+ * Uncomment when corresponding SCSI changes are done.
+ *
+ if (!sp->cmd->prot_chk)
+ return 0;
+ *
+ */
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ if (ql2xenablehba_err_chk >= 1)
+ return 1;
+ break;
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ if (ql2xenablehba_err_chk >= 2)
+ return 1;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ return 1;
+ }
+ return 0;
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 49d6906af88..dbec89622a0 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -709,20 +709,28 @@ struct fw_dif_context {
*
*/
static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
unsigned int protcnt)
{
- struct sd_dif_tuple *spt;
+ struct scsi_cmnd *cmd = sp->cmd;
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- unsigned char op = scsi_get_prot_op(cmd);
switch (scsi_get_prot_type(cmd)) {
- /* For TYPE 0 protection: no checking */
case SCSI_PROT_DIF_TYPE0:
- pkt->ref_tag_mask[0] = 0x00;
- pkt->ref_tag_mask[1] = 0x00;
- pkt->ref_tag_mask[2] = 0x00;
- pkt->ref_tag_mask[3] = 0x00;
+ /*
+ * No check for ql2xenablehba_err_chk, as it would be an
+ * I/O error if hba tag generation is not done.
+ */
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
+ pkt->ref_tag_mask[0] = 0xff;
+ pkt->ref_tag_mask[1] = 0xff;
+ pkt->ref_tag_mask[2] = 0xff;
+ pkt->ref_tag_mask[3] = 0xff;
break;
/*
@@ -730,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
* match LBA in CDB + N
*/
case SCSI_PROT_DIF_TYPE2:
- if (!ql2xenablehba_err_chk)
- break;
-
- if (scsi_prot_sg_count(cmd)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- pkt->app_tag = swab32(spt->app_tag);
- pkt->app_tag_mask[0] = 0xff;
- pkt->app_tag_mask[1] = 0xff;
- }
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
@@ -763,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
* 16 bit app tag.
*/
case SCSI_PROT_DIF_TYPE1:
- if (!ql2xenablehba_err_chk)
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
break;
- if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
- op == SCSI_PROT_WRITE_PASS)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- ql_dbg(ql_dbg_io, vha, 0x3008,
- "LBA from user %p, lba = 0x%x for cmd=%p.\n",
- spt, (int)spt->ref_tag, cmd);
- pkt->ref_tag = swab32(spt->ref_tag);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- } else {
- pkt->ref_tag = cpu_to_le32((uint32_t)
- (0xffffffff & scsi_get_lba(cmd)));
- pkt->app_tag = __constant_cpu_to_le16(0);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- }
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
@@ -798,8 +791,162 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
scsi_get_prot_type(cmd), cmd);
}
+struct qla2_sgx {
+ dma_addr_t dma_addr; /* OUT */
+ uint32_t dma_len; /* OUT */
+
+ uint32_t tot_bytes; /* IN */
+ struct scatterlist *cur_sg; /* IN */
+
+ /* for book keeping, bzero on initial invocation */
+ uint32_t bytes_consumed;
+ uint32_t num_bytes;
+ uint32_t tot_partial;
+
+ /* for debugging */
+ uint32_t num_sg;
+ srb_t *sp;
+};
static int
+qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
+ uint32_t *partial)
+{
+ struct scatterlist *sg;
+ uint32_t cumulative_partial, sg_len;
+ dma_addr_t sg_dma_addr;
+
+ if (sgx->num_bytes == sgx->tot_bytes)
+ return 0;
+
+ sg = sgx->cur_sg;
+ cumulative_partial = sgx->tot_partial;
+
+ sg_dma_addr = sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
+
+ if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
+ sgx->dma_len = (blk_sz - cumulative_partial);
+ sgx->tot_partial = 0;
+ sgx->num_bytes += blk_sz;
+ *partial = 0;
+ } else {
+ sgx->dma_len = sg_len - sgx->bytes_consumed;
+ sgx->tot_partial += sgx->dma_len;
+ *partial = 1;
+ }
+
+ sgx->bytes_consumed += sgx->dma_len;
+
+ if (sg_len == sgx->bytes_consumed) {
+ sg = sg_next(sg);
+ sgx->num_sg++;
+ sgx->cur_sg = sg;
+ sgx->bytes_consumed = 0;
+ }
+
+ return 1;
+}
+
+static int
+qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
+ uint32_t *dsd, uint16_t tot_dsds)
+{
+ void *next_dsd;
+ uint8_t avail_dsds = 0;
+ uint32_t dsd_list_len;
+ struct dsd_dma *dsd_ptr;
+ struct scatterlist *sg_prot;
+ uint32_t *cur_dsd = dsd;
+ uint16_t used_dsds = tot_dsds;
+
+ uint32_t prot_int;
+ uint32_t partial;
+ struct qla2_sgx sgx;
+ dma_addr_t sle_dma;
+ uint32_t sle_dma_len, tot_prot_dma_len = 0;
+ struct scsi_cmnd *cmd = sp->cmd;
+
+ prot_int = cmd->device->sector_size;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(sp->cmd);
+ sgx.cur_sg = scsi_sglist(sp->cmd);
+ sgx.sp = sp;
+
+ sg_prot = scsi_prot_sglist(sp->cmd);
+
+ while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
+
+ sle_dma = sgx.dma_addr;
+ sle_dma_len = sgx.dma_len;
+alloc_and_fill:
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
+ QLA_DSDS_PER_IOCB : used_dsds;
+ dsd_list_len = (avail_dsds + 1) * 12;
+ used_dsds -= avail_dsds;
+
+ /* allocate tracking DS */
+ dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
+ if (!dsd_ptr)
+ return 1;
+
+ /* allocate new list */
+ dsd_ptr->dsd_addr = next_dsd =
+ dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
+ &dsd_ptr->dsd_list_dma);
+
+ if (!next_dsd) {
+ /*
+ * Need to cleanup only this dsd_ptr, rest
+ * will be done by sp_free_dma()
+ */
+ kfree(dsd_ptr);
+ return 1;
+ }
+
+ list_add_tail(&dsd_ptr->list,
+ &((struct crc_context *)sp->ctx)->dsd_list);
+
+ sp->flags |= SRB_CRC_CTX_DSD_VALID;
+
+ /* add new list to cmd iocb or last list */
+ *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = dsd_list_len;
+ cur_dsd = (uint32_t *)next_dsd;
+ }
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sle_dma_len);
+ avail_dsds--;
+
+ if (partial == 0) {
+ /* Got a full protection interval */
+ sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
+ sle_dma_len = 8;
+
+ tot_prot_dma_len += sle_dma_len;
+ if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
+ tot_prot_dma_len = 0;
+ sg_prot = sg_next(sg_prot);
+ }
+
+ partial = 1; /* So as to not re-enter this block */
+ goto alloc_and_fill;
+ }
+ }
+ /* Null termination */
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ return 0;
+}
+static int
qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
uint16_t tot_dsds)
{
@@ -981,7 +1128,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
struct scsi_cmnd *cmd;
struct scatterlist *cur_seg;
int sgc;
- uint32_t total_bytes;
+ uint32_t total_bytes = 0;
uint32_t data_bytes;
uint32_t dif_bytes;
uint8_t bundling = 1;
@@ -1023,8 +1170,10 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
__constant_cpu_to_le16(CF_READ_DATA);
}
- tot_prot_dsds = scsi_prot_sg_count(cmd);
- if (!tot_prot_dsds)
+ if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT))
bundling = 0;
/* Allocate CRC context from global pool */
@@ -1047,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
- qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+ qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
&crc_ctx_pkt->ref_tag, tot_prot_dsds);
cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
@@ -1076,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
- host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
@@ -1107,15 +1255,28 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
/* Compute dif len and adjust data len to incude protection */
- total_bytes = data_bytes;
dif_bytes = 0;
blk_size = cmd->device->sector_size;
- if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
- dif_bytes = (data_bytes / blk_size) * 8;
- total_bytes += dif_bytes;
+ dif_bytes = (data_bytes / blk_size) * 8;
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ total_bytes = data_bytes;
+ data_bytes += dif_bytes;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ total_bytes = data_bytes + dif_bytes;
+ break;
+ default:
+ BUG();
}
- if (!ql2xenablehba_err_chk)
+ if (!qla2x00_hba_err_chk_enabled(sp))
fw_prot_opts |= 0x10; /* Disable Guard tag checking */
if (!bundling) {
@@ -1151,7 +1312,12 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
cmd_pkt->control_flags |=
__constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
- if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
+
+ if (!bundling && tot_prot_dsds) {
+ if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
+ cur_dsd, tot_dsds))
+ goto crc_queuing_error;
+ } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
(tot_dsds - tot_prot_dsds)))
goto crc_queuing_error;
@@ -1414,6 +1580,22 @@ qla24xx_dif_start_scsi(srb_t *sp)
goto queuing_error;
else
sp->flags |= SRB_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ struct qla2_sgx sgx;
+ uint32_t partial;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(cmd);
+ sgx.cur_sg = scsi_sglist(cmd);
+ sgx.sp = sp;
+
+ nseg = 0;
+ while (qla24xx_get_one_block_sg(
+ cmd->device->sector_size, &sgx, &partial))
+ nseg++;
+ }
} else
nseg = 0;
@@ -1428,6 +1610,11 @@ qla24xx_dif_start_scsi(srb_t *sp)
goto queuing_error;
else
sp->flags |= SRB_CRC_PROT_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
+ }
} else {
nseg = 0;
}
@@ -1454,6 +1641,7 @@ qla24xx_dif_start_scsi(srb_t *sp)
/* Build header part of command packet (excluding the OPCODE). */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
+ sp->handle = handle;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index b16b7725dee..8a7591f035e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -719,7 +719,6 @@ skip_rio:
vha->flags.rscn_queue_overflow = 1;
}
- atomic_set(&vha->loop_state, LOOP_UPDATE);
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
@@ -1435,25 +1434,27 @@ struct scsi_dif_tuple {
* ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
* to indicate to the kernel that the HBA detected error.
*/
-static inline void
+static inline int
qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
{
struct scsi_qla_host *vha = sp->fcport->vha;
struct scsi_cmnd *cmd = sp->cmd;
- struct scsi_dif_tuple *ep =
- (struct scsi_dif_tuple *)&sts24->data[20];
- struct scsi_dif_tuple *ap =
- (struct scsi_dif_tuple *)&sts24->data[12];
+ uint8_t *ap = &sts24->data[12];
+ uint8_t *ep = &sts24->data[20];
uint32_t e_ref_tag, a_ref_tag;
uint16_t e_app_tag, a_app_tag;
uint16_t e_guard, a_guard;
- e_ref_tag = be32_to_cpu(ep->ref_tag);
- a_ref_tag = be32_to_cpu(ap->ref_tag);
- e_app_tag = be16_to_cpu(ep->app_tag);
- a_app_tag = be16_to_cpu(ap->app_tag);
- e_guard = be16_to_cpu(ep->guard);
- a_guard = be16_to_cpu(ap->guard);
+ /*
+ * swab32 of the "data" field in the beginning of qla2x00_status_entry()
+ * would make guard field appear at offset 2
+ */
+ a_guard = le16_to_cpu(*(uint16_t *)(ap + 2));
+ a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
+ a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
+ e_guard = le16_to_cpu(*(uint16_t *)(ep + 2));
+ e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
+ e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
ql_dbg(ql_dbg_io, vha, 0x3023,
"iocb(s) %p Returned STATUS.\n", sts24);
@@ -1465,6 +1466,63 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
a_app_tag, e_app_tag, a_guard, e_guard);
+ /*
+ * Ignore sector if:
+ * For type 3: ref & app tag is all 'f's
+ * For type 0,1,2: app tag is all 'f's
+ */
+ if ((a_app_tag == 0xffff) &&
+ ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
+ (a_ref_tag == 0xffffffff))) {
+ uint32_t blocks_done, resid;
+ sector_t lba_s = scsi_get_lba(cmd);
+
+ /* 2TB boundary case covered automatically with this */
+ blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
+
+ resid = scsi_bufflen(cmd) - (blocks_done *
+ cmd->device->sector_size);
+
+ scsi_set_resid(cmd, resid);
+ cmd->result = DID_OK << 16;
+
+ /* Update protection tag */
+ if (scsi_prot_sg_count(cmd)) {
+ uint32_t i, j = 0, k = 0, num_ent;
+ struct scatterlist *sg;
+ struct sd_dif_tuple *spt;
+
+ /* Patch the corresponding protection tags */
+ scsi_for_each_prot_sg(cmd, sg,
+ scsi_prot_sg_count(cmd), i) {
+ num_ent = sg_dma_len(sg) / 8;
+ if (k + num_ent < blocks_done) {
+ k += num_ent;
+ continue;
+ }
+ j = blocks_done - k - 1;
+ k = blocks_done;
+ break;
+ }
+
+ if (k != blocks_done) {
+ qla_printk(KERN_WARNING, sp->fcport->vha->hw,
+ "unexpected tag values tag:lba=%x:%llx)\n",
+ e_ref_tag, (unsigned long long)lba_s);
+ return 1;
+ }
+
+ spt = page_address(sg_page(sg)) + sg->offset;
+ spt += j;
+
+ spt->app_tag = 0xffff;
+ if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
+ spt->ref_tag = 0xffffffff;
+ }
+
+ return 0;
+ }
+
/* check guard */
if (e_guard != a_guard) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
@@ -1472,28 +1530,30 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check appl tag */
- if (e_app_tag != a_app_tag) {
+ /* check ref tag */
+ if (e_ref_tag != a_ref_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x2);
+ 0x10, 0x3);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check ref tag */
- if (e_ref_tag != a_ref_tag) {
+ /* check appl tag */
+ if (e_app_tag != a_app_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x3);
+ 0x10, 0x2);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
+
+ return 1;
}
/**
@@ -1767,7 +1827,7 @@ check_scsi_status:
break;
case CS_DIF_ERROR:
- qla2x00_handle_dif_error(sp, sts24);
+ logit = qla2x00_handle_dif_error(sp, sts24);
break;
default:
cp->result = DID_ERROR << 16;
@@ -2468,11 +2528,10 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
goto skip_msi;
}
- if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
- !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
+ if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
ql_log(ql_log_warn, vha, 0x0035,
"MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
- ha->pdev->revision, ha->fw_attributes);
+ ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
goto skip_msix;
}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index c706ed37000..f488cc69fc7 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
host->can_queue = base_vha->req->length + 128;
host->this_id = 255;
host->cmd_per_lun = 3;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 5cbf33a50b1..049807cda41 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2208,6 +2208,7 @@ qla82xx_msix_rsp_q(int irq, void *dev_id)
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_82xx __iomem *reg;
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -2218,11 +2219,11 @@ qla82xx_msix_rsp_q(int irq, void *dev_id)
ha = rsp->hw;
reg = &ha->iobase->isp82;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
WRT_REG_DWORD(&reg->host_int, 0);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
@@ -2838,6 +2839,16 @@ sufficient_dsds:
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
+ /* build FCP_CMND IU */
+ memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+ int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
+ ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 1;
+ else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 2;
+
/*
* Update tagged queuing modifier -- default is TSK_SIMPLE (0).
*/
@@ -2854,16 +2865,6 @@ sufficient_dsds:
}
}
- /* build FCP_CMND IU */
- memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
- int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
- ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
-
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 1;
- else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 2;
-
memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e02df276804..4cace3f20c0 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to report for target devices.");
/* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenabledif,
" Enable T10-CRC-DIF "
- " Default is 0 - No DIF Support. 1 - Enable it");
+ " Default is 0 - No DIF Support. 1 - Enable it"
+ ", 2 - Enable DIF for all types, except Type 0.");
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
- " Enable T10-CRC-DIF Error isolation by HBA"
- " Default is 0 - Error isolation disabled, 1 - Enable it");
+ " Enable T10-CRC-DIF Error isolation by HBA:\n"
+ " Default is 1.\n"
+ " 0 -- Error isolation disabled\n"
+ " 1 -- Error isolation enabled only for DIX Type 0\n"
+ " 2 -- Error isolation enabled for all Types\n");
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO);
@@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
"Abort command mbx success.\n");
wait = 1;
}
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_sp_compl(ha, sp);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Did the command return during mailbox execution? */
+ if (ret == FAILED && !CMD_SP(cmd))
+ ret = SUCCESS;
/* Wait for the command to be returned. */
if (wait) {
@@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
host->this_id = 255;
host->cmd_per_lun = 3;
host->unique_id = host->host_no;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
@@ -2378,13 +2389,16 @@ skip_dpc:
"Detected hba at address=%p.\n",
ha);
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
base_vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_init, base_vha, 0x00f1,
"Registering for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 062c97bf62f..13b6357c1fa 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.03-k"
+#define QLA2XXX_VERSION "8.03.07.07-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 82dee9a6c0d..d3bff424286 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -22,7 +22,7 @@
#include <asm/io.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cpu.h>
/* SPI register offsets */
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index d2407558773..24cacff5778 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -825,6 +825,9 @@ static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi)
{
struct device *dev = mspi->dev;
+ if (!(mspi->flags & SPI_CPM_MODE))
+ return;
+
dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 8ac6542aedc..fa594d604ac 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -786,9 +786,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
if (cs_gpio < 0)
cs_gpio = mxc_platform_info->chipselect[i];
+
+ spi_imx->chipselect[i] = cs_gpio;
if (cs_gpio < 0)
continue;
- spi_imx->chipselect[i] = cs_gpio;
+
ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
if (ret) {
while (i > 0) {
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 1d23f383186..6a80749391d 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -50,6 +50,8 @@
#define PCH_RX_THOLD 7
#define PCH_RX_THOLD_MAX 15
+#define PCH_TX_THOLD 2
+
#define PCH_MAX_BAUDRATE 5000000
#define PCH_MAX_FIFO_DEPTH 16
@@ -58,6 +60,7 @@
#define PCH_SLEEP_TIME 10
#define SSN_LOW 0x02U
+#define SSN_HIGH 0x03U
#define SSN_NO_CONTROL 0x00U
#define PCH_MAX_CS 0xFF
#define PCI_DEVICE_ID_GE_SPI 0x8816
@@ -316,16 +319,19 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
/* if transfer complete interrupt */
if (reg_spsr_val & SPSR_FI_BIT) {
- if (tx_index < bpw_len)
+ if ((tx_index == bpw_len) && (rx_index == tx_index)) {
+ /* disable interrupts */
+ pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
+
+ /* transfer is completed;
+ inform pch_spi_process_messages */
+ data->transfer_complete = true;
+ data->transfer_active = false;
+ wake_up(&data->wait);
+ } else {
dev_err(&data->master->dev,
"%s : Transfer is not completed", __func__);
- /* disable interrupts */
- pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
-
- /* transfer is completed;inform pch_spi_process_messages */
- data->transfer_complete = true;
- data->transfer_active = false;
- wake_up(&data->wait);
+ }
}
}
@@ -348,16 +354,26 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id)
"%s returning due to suspend\n", __func__);
return IRQ_NONE;
}
- if (data->use_dma)
- return IRQ_NONE;
io_remap_addr = data->io_remap_addr;
spsr = io_remap_addr + PCH_SPSR;
reg_spsr_val = ioread32(spsr);
- if (reg_spsr_val & SPSR_ORF_BIT)
- dev_err(&board_dat->pdev->dev, "%s Over run error", __func__);
+ if (reg_spsr_val & SPSR_ORF_BIT) {
+ dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
+ if (data->current_msg->complete != 0) {
+ data->transfer_complete = true;
+ data->current_msg->status = -EIO;
+ data->current_msg->complete(data->current_msg->context);
+ data->bcurrent_msg_processing = false;
+ data->current_msg = NULL;
+ data->cur_trans = NULL;
+ }
+ }
+
+ if (data->use_dma)
+ return IRQ_NONE;
/* Check if the interrupt is for SPI device */
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
@@ -756,10 +772,6 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
wait_event_interruptible(data->wait, data->transfer_complete);
- pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
- dev_dbg(&data->master->dev,
- "%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
-
/* clear all interrupts */
pch_spi_writereg(data->master, PCH_SPSR,
pch_spi_readreg(data->master, PCH_SPSR));
@@ -815,10 +827,11 @@ static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
}
}
-static void pch_spi_start_transfer(struct pch_spi_data *data)
+static int pch_spi_start_transfer(struct pch_spi_data *data)
{
struct pch_spi_dma_ctrl *dma;
unsigned long flags;
+ int rtn;
dma = &data->dma;
@@ -833,19 +846,23 @@ static void pch_spi_start_transfer(struct pch_spi_data *data)
initiating the transfer. */
dev_dbg(&data->master->dev,
"%s:waiting for transfer to get over\n", __func__);
- wait_event_interruptible(data->wait, data->transfer_complete);
+ rtn = wait_event_interruptible_timeout(data->wait,
+ data->transfer_complete,
+ msecs_to_jiffies(2 * HZ));
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
DMA_FROM_DEVICE);
+
+ dma_sync_sg_for_cpu(&data->master->dev, dma->sg_tx_p, dma->nent,
+ DMA_FROM_DEVICE);
+ memset(data->dma.tx_buf_virt, 0, PAGE_SIZE);
+
async_tx_ack(dma->desc_rx);
async_tx_ack(dma->desc_tx);
kfree(dma->sg_tx_p);
kfree(dma->sg_rx_p);
spin_lock_irqsave(&data->lock, flags);
- pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
- dev_dbg(&data->master->dev,
- "%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
/* clear fifo threshold, disable interrupts, disable SPI transfer */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
@@ -858,6 +875,8 @@ static void pch_spi_start_transfer(struct pch_spi_data *data)
pch_spi_clear_fifo(data->master);
spin_unlock_irqrestore(&data->lock, flags);
+
+ return rtn;
}
static void pch_dma_rx_complete(void *arg)
@@ -1023,8 +1042,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
/* set receive fifo threshold and transmit fifo threshold */
pch_spi_setclr_reg(data->master, PCH_SPCR,
((size - 1) << SPCR_RFIC_FIELD) |
- ((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) <<
- SPCR_TFIC_FIELD),
+ (PCH_TX_THOLD << SPCR_TFIC_FIELD),
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
spin_unlock_irqrestore(&data->lock, flags);
@@ -1035,13 +1053,20 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
/* offset, length setting */
sg = dma->sg_rx_p;
for (i = 0; i < num; i++, sg++) {
- if (i == 0) {
- sg->offset = 0;
+ if (i == (num - 2)) {
+ sg->offset = size * i;
+ sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
sg->offset);
sg_dma_len(sg) = rem;
+ } else if (i == (num - 1)) {
+ sg->offset = size * (i - 1) + rem;
+ sg->offset = sg->offset * (*bpw / 8);
+ sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
+ sg->offset);
+ sg_dma_len(sg) = size;
} else {
- sg->offset = rem + size * (i - 1);
+ sg->offset = size * i;
sg->offset = sg->offset * (*bpw / 8);
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
sg->offset);
@@ -1065,6 +1090,16 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
dma->desc_rx = desc_rx;
/* TX */
+ if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
+ num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+ size = PCH_DMA_TRANS_SIZE;
+ rem = 16;
+ } else {
+ num = 1;
+ size = data->bpw_len;
+ rem = data->bpw_len;
+ }
+
dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
/* offset, length setting */
@@ -1162,6 +1197,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
if (data->use_dma)
pch_spi_request_dma(data,
data->current_msg->spi->bits_per_word);
+ pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
do {
/* If we are already processing a message get the next
transfer structure from the message otherwise retrieve
@@ -1184,7 +1220,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
if (data->use_dma) {
pch_spi_handle_dma(data, &bpw);
- pch_spi_start_transfer(data);
+ if (!pch_spi_start_transfer(data))
+ goto out;
pch_spi_copy_rx_data_for_dma(data, bpw);
} else {
pch_spi_set_tx(data, &bpw);
@@ -1222,6 +1259,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
} while (data->cur_trans != NULL);
+out:
+ pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
if (data->use_dma)
pch_spi_release_dma(data);
}
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 6859af0778c..7611def97d0 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -241,8 +241,10 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data);
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_ISA_DMA_API
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
+#endif
+#ifdef CONFIG_COMEDI_PCI
static int labpc_find_device(struct comedi_device *dev, int bus, int slot);
#endif
static int labpc_dio_mem_callback(int dir, int port, int data,
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index a3f5162bfed..462fbc20561 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1242,7 +1242,7 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw,
int ret = 0;
BUG_ON(!is_ephemeral(pool));
- zbud_decompress(virt_to_page(data), pampd);
+ zbud_decompress((struct page *)(data), pampd);
zbud_free_and_delist((struct zbud_hdr *)pampd);
atomic_dec(&zcache_curr_eph_pampd_count);
return ret;
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 497b2e718a7..5b773160200 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1430,7 +1430,7 @@ static int iscsi_enforce_integrity_rules(
u8 DataSequenceInOrder = 0;
u8 ErrorRecoveryLevel = 0, SessionType = 0;
u8 IFMarker = 0, OFMarker = 0;
- u8 IFMarkInt_Reject = 0, OFMarkInt_Reject = 0;
+ u8 IFMarkInt_Reject = 1, OFMarkInt_Reject = 1;
u32 FirstBurstLength = 0, MaxBurstLength = 0;
struct iscsi_param *param = NULL;
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index a0d23bc0fc9..f00137f377b 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -875,40 +875,6 @@ void iscsit_inc_session_usage_count(struct iscsi_session *sess)
}
/*
- * Used before iscsi_do[rx,tx]_data() to determine iov and [rx,tx]_marker
- * array counts needed for sync and steering.
- */
-static int iscsit_determine_sync_and_steering_counts(
- struct iscsi_conn *conn,
- struct iscsi_data_count *count)
-{
- u32 length = count->data_length;
- u32 marker, markint;
-
- count->sync_and_steering = 1;
-
- marker = (count->type == ISCSI_RX_DATA) ?
- conn->of_marker : conn->if_marker;
- markint = (count->type == ISCSI_RX_DATA) ?
- (conn->conn_ops->OFMarkInt * 4) :
- (conn->conn_ops->IFMarkInt * 4);
- count->ss_iov_count = count->iov_count;
-
- while (length > 0) {
- if (length >= marker) {
- count->ss_iov_count += 3;
- count->ss_marker_count += 2;
-
- length -= marker;
- marker = markint;
- } else
- length = 0;
- }
-
- return 0;
-}
-
-/*
* Setup conn->if_marker and conn->of_marker values based upon
* the initial marker-less interval. (see iSCSI v19 A.2)
*/
@@ -1290,7 +1256,7 @@ int iscsit_fe_sendpage_sg(
struct kvec iov;
u32 tx_hdr_size, data_len;
u32 offset = cmd->first_data_sg_off;
- int tx_sent;
+ int tx_sent, iov_off;
send_hdr:
tx_hdr_size = ISCSI_HDR_LEN;
@@ -1310,9 +1276,19 @@ send_hdr:
}
data_len = cmd->tx_size - tx_hdr_size - cmd->padding;
- if (conn->conn_ops->DataDigest)
+ /*
+ * Set iov_off used by padding and data digest tx_data() calls below
+ * in order to determine proper offset into cmd->iov_data[]
+ */
+ if (conn->conn_ops->DataDigest) {
data_len -= ISCSI_CRC_LEN;
-
+ if (cmd->padding)
+ iov_off = (cmd->iov_data_count - 2);
+ else
+ iov_off = (cmd->iov_data_count - 1);
+ } else {
+ iov_off = (cmd->iov_data_count - 1);
+ }
/*
* Perform sendpage() for each page in the scatterlist
*/
@@ -1341,8 +1317,7 @@ send_pg:
send_padding:
if (cmd->padding) {
- struct kvec *iov_p =
- &cmd->iov_data[cmd->iov_data_count-1];
+ struct kvec *iov_p = &cmd->iov_data[iov_off++];
tx_sent = tx_data(conn, iov_p, 1, cmd->padding);
if (cmd->padding != tx_sent) {
@@ -1356,8 +1331,7 @@ send_padding:
send_datacrc:
if (conn->conn_ops->DataDigest) {
- struct kvec *iov_d =
- &cmd->iov_data[cmd->iov_data_count];
+ struct kvec *iov_d = &cmd->iov_data[iov_off];
tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN);
if (ISCSI_CRC_LEN != tx_sent) {
@@ -1431,8 +1405,7 @@ static int iscsit_do_rx_data(
struct iscsi_data_count *count)
{
int data = count->data_length, rx_loop = 0, total_rx = 0, iov_len;
- u32 rx_marker_val[count->ss_marker_count], rx_marker_iov = 0;
- struct kvec iov[count->ss_iov_count], *iov_p;
+ struct kvec *iov_p;
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
@@ -1440,93 +1413,8 @@ static int iscsit_do_rx_data(
memset(&msg, 0, sizeof(struct msghdr));
- if (count->sync_and_steering) {
- int size = 0;
- u32 i, orig_iov_count = 0;
- u32 orig_iov_len = 0, orig_iov_loc = 0;
- u32 iov_count = 0, per_iov_bytes = 0;
- u32 *rx_marker, old_rx_marker = 0;
- struct kvec *iov_record;
-
- memset(&rx_marker_val, 0,
- count->ss_marker_count * sizeof(u32));
- memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
- iov_record = count->iov;
- orig_iov_count = count->iov_count;
- rx_marker = &conn->of_marker;
-
- i = 0;
- size = data;
- orig_iov_len = iov_record[orig_iov_loc].iov_len;
- while (size > 0) {
- pr_debug("rx_data: #1 orig_iov_len %u,"
- " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
- pr_debug("rx_data: #2 rx_marker %u, size"
- " %u\n", *rx_marker, size);
-
- if (orig_iov_len >= *rx_marker) {
- iov[iov_count].iov_len = *rx_marker;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &rx_marker_val[rx_marker_iov++];
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &rx_marker_val[rx_marker_iov++];
- old_rx_marker = *rx_marker;
-
- /*
- * OFMarkInt is in 32-bit words.
- */
- *rx_marker = (conn->conn_ops->OFMarkInt * 4);
- size -= old_rx_marker;
- orig_iov_len -= old_rx_marker;
- per_iov_bytes += old_rx_marker;
-
- pr_debug("rx_data: #3 new_rx_marker"
- " %u, size %u\n", *rx_marker, size);
- } else {
- iov[iov_count].iov_len = orig_iov_len;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- per_iov_bytes = 0;
- *rx_marker -= orig_iov_len;
- size -= orig_iov_len;
-
- if (size)
- orig_iov_len =
- iov_record[++orig_iov_loc].iov_len;
-
- pr_debug("rx_data: #4 new_rx_marker"
- " %u, size %u\n", *rx_marker, size);
- }
- }
- data += (rx_marker_iov * (MARKER_SIZE / 2));
-
- iov_p = &iov[0];
- iov_len = iov_count;
-
- if (iov_count > count->ss_iov_count) {
- pr_err("iov_count: %d, count->ss_iov_count:"
- " %d\n", iov_count, count->ss_iov_count);
- return -1;
- }
- if (rx_marker_iov > count->ss_marker_count) {
- pr_err("rx_marker_iov: %d, count->ss_marker"
- "_count: %d\n", rx_marker_iov,
- count->ss_marker_count);
- return -1;
- }
- } else {
- iov_p = count->iov;
- iov_len = count->iov_count;
- }
+ iov_p = count->iov;
+ iov_len = count->iov_count;
while (total_rx < data) {
rx_loop = kernel_recvmsg(conn->sock, &msg, iov_p, iov_len,
@@ -1541,16 +1429,6 @@ static int iscsit_do_rx_data(
rx_loop, total_rx, data);
}
- if (count->sync_and_steering) {
- int j;
- for (j = 0; j < rx_marker_iov; j++) {
- pr_debug("rx_data: #5 j: %d, offset: %d\n",
- j, rx_marker_val[j]);
- conn->of_marker_offset = rx_marker_val[j];
- }
- total_rx -= (rx_marker_iov * (MARKER_SIZE / 2));
- }
-
return total_rx;
}
@@ -1559,8 +1437,7 @@ static int iscsit_do_tx_data(
struct iscsi_data_count *count)
{
int data = count->data_length, total_tx = 0, tx_loop = 0, iov_len;
- u32 tx_marker_val[count->ss_marker_count], tx_marker_iov = 0;
- struct kvec iov[count->ss_iov_count], *iov_p;
+ struct kvec *iov_p;
struct msghdr msg;
if (!conn || !conn->sock || !conn->conn_ops)
@@ -1573,98 +1450,8 @@ static int iscsit_do_tx_data(
memset(&msg, 0, sizeof(struct msghdr));
- if (count->sync_and_steering) {
- int size = 0;
- u32 i, orig_iov_count = 0;
- u32 orig_iov_len = 0, orig_iov_loc = 0;
- u32 iov_count = 0, per_iov_bytes = 0;
- u32 *tx_marker, old_tx_marker = 0;
- struct kvec *iov_record;
-
- memset(&tx_marker_val, 0,
- count->ss_marker_count * sizeof(u32));
- memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
- iov_record = count->iov;
- orig_iov_count = count->iov_count;
- tx_marker = &conn->if_marker;
-
- i = 0;
- size = data;
- orig_iov_len = iov_record[orig_iov_loc].iov_len;
- while (size > 0) {
- pr_debug("tx_data: #1 orig_iov_len %u,"
- " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
- pr_debug("tx_data: #2 tx_marker %u, size"
- " %u\n", *tx_marker, size);
-
- if (orig_iov_len >= *tx_marker) {
- iov[iov_count].iov_len = *tx_marker;
- iov[iov_count++].iov_base =
- (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- tx_marker_val[tx_marker_iov] =
- (size - *tx_marker);
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &tx_marker_val[tx_marker_iov++];
- iov[iov_count].iov_len = (MARKER_SIZE / 2);
- iov[iov_count++].iov_base =
- &tx_marker_val[tx_marker_iov++];
- old_tx_marker = *tx_marker;
-
- /*
- * IFMarkInt is in 32-bit words.
- */
- *tx_marker = (conn->conn_ops->IFMarkInt * 4);
- size -= old_tx_marker;
- orig_iov_len -= old_tx_marker;
- per_iov_bytes += old_tx_marker;
-
- pr_debug("tx_data: #3 new_tx_marker"
- " %u, size %u\n", *tx_marker, size);
- pr_debug("tx_data: #4 offset %u\n",
- tx_marker_val[tx_marker_iov-1]);
- } else {
- iov[iov_count].iov_len = orig_iov_len;
- iov[iov_count++].iov_base
- = (iov_record[orig_iov_loc].iov_base +
- per_iov_bytes);
-
- per_iov_bytes = 0;
- *tx_marker -= orig_iov_len;
- size -= orig_iov_len;
-
- if (size)
- orig_iov_len =
- iov_record[++orig_iov_loc].iov_len;
-
- pr_debug("tx_data: #5 new_tx_marker"
- " %u, size %u\n", *tx_marker, size);
- }
- }
-
- data += (tx_marker_iov * (MARKER_SIZE / 2));
-
- iov_p = &iov[0];
- iov_len = iov_count;
-
- if (iov_count > count->ss_iov_count) {
- pr_err("iov_count: %d, count->ss_iov_count:"
- " %d\n", iov_count, count->ss_iov_count);
- return -1;
- }
- if (tx_marker_iov > count->ss_marker_count) {
- pr_err("tx_marker_iov: %d, count->ss_marker"
- "_count: %d\n", tx_marker_iov,
- count->ss_marker_count);
- return -1;
- }
- } else {
- iov_p = count->iov;
- iov_len = count->iov_count;
- }
+ iov_p = count->iov;
+ iov_len = count->iov_count;
while (total_tx < data) {
tx_loop = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len,
@@ -1679,9 +1466,6 @@ static int iscsit_do_tx_data(
tx_loop, total_tx, data);
}
- if (count->sync_and_steering)
- total_tx -= (tx_marker_iov * (MARKER_SIZE / 2));
-
return total_tx;
}
@@ -1702,12 +1486,6 @@ int rx_data(
c.data_length = data;
c.type = ISCSI_RX_DATA;
- if (conn->conn_ops->OFMarker &&
- (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
- if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
- return -1;
- }
-
return iscsit_do_rx_data(conn, &c);
}
@@ -1728,12 +1506,6 @@ int tx_data(
c.data_length = data;
c.type = ISCSI_TX_DATA;
- if (conn->conn_ops->IFMarker &&
- (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
- if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
- return -1;
- }
-
return iscsit_do_tx_data(conn, &c);
}
diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c
index 89ae923c5da..f04d4ef99dc 100644
--- a/drivers/target/target_core_cdb.c
+++ b/drivers/target/target_core_cdb.c
@@ -24,6 +24,7 @@
*/
#include <linux/kernel.h>
+#include <linux/ctype.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
@@ -154,6 +155,37 @@ target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf)
return 0;
}
+static void
+target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf_off)
+{
+ unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0];
+ unsigned char *buf = buf_off;
+ int cnt = 0, next = 1;
+ /*
+ * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on
+ * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field
+ * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION
+ * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL
+ * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure
+ * per device uniqeness.
+ */
+ while (*p != '\0') {
+ if (cnt >= 13)
+ break;
+ if (!isxdigit(*p)) {
+ p++;
+ continue;
+ }
+ if (next != 0) {
+ buf[cnt++] |= hex_to_bin(*p++);
+ next = 0;
+ } else {
+ buf[cnt] = hex_to_bin(*p++) << 4;
+ next = 1;
+ }
+ }
+}
+
/*
* Device identification VPD, for a complete list of
* DESIGNATOR TYPEs see spc4r17 Table 459.
@@ -219,8 +251,7 @@ target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf)
* VENDOR_SPECIFIC_IDENTIFIER and
* VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
*/
- buf[off++] |= hex_to_bin(dev->se_sub_dev->t10_wwn.unit_serial[0]);
- hex2bin(&buf[off], &dev->se_sub_dev->t10_wwn.unit_serial[1], 12);
+ target_parse_naa_6h_vendor_specific(dev, &buf[off]);
len = 20;
off = (len + 4);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 8d0c58ea631..a4b0a8d27f2 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -977,15 +977,17 @@ static void target_qf_do_work(struct work_struct *work)
{
struct se_device *dev = container_of(work, struct se_device,
qf_work_queue);
+ LIST_HEAD(qf_cmd_list);
struct se_cmd *cmd, *cmd_tmp;
spin_lock_irq(&dev->qf_cmd_lock);
- list_for_each_entry_safe(cmd, cmd_tmp, &dev->qf_cmd_list, se_qf_node) {
+ list_splice_init(&dev->qf_cmd_list, &qf_cmd_list);
+ spin_unlock_irq(&dev->qf_cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) {
list_del(&cmd->se_qf_node);
atomic_dec(&dev->dev_qf_count);
smp_mb__after_atomic_dec();
- spin_unlock_irq(&dev->qf_cmd_lock);
pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue"
" context: %s\n", cmd->se_tfo->get_fabric_name(), cmd,
@@ -997,10 +999,7 @@ static void target_qf_do_work(struct work_struct *work)
* has been added to head of queue
*/
transport_add_cmd_to_queue(cmd, cmd->t_state);
-
- spin_lock_irq(&dev->qf_cmd_lock);
}
- spin_unlock_irq(&dev->qf_cmd_lock);
}
unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd)
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
index bd4fe21a23b..3749d8b4b42 100644
--- a/drivers/target/tcm_fc/tcm_fc.h
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -98,8 +98,7 @@ struct ft_tpg {
struct list_head list; /* linkage in ft_lport_acl tpg_list */
struct list_head lun_list; /* head of LUNs */
struct se_portal_group se_tpg;
- struct task_struct *thread; /* processing thread */
- struct se_queue_obj qobj; /* queue for processing thread */
+ struct workqueue_struct *workqueue;
};
struct ft_lport_acl {
@@ -110,16 +109,10 @@ struct ft_lport_acl {
struct se_wwn fc_lport_wwn;
};
-enum ft_cmd_state {
- FC_CMD_ST_NEW = 0,
- FC_CMD_ST_REJ
-};
-
/*
* Commands
*/
struct ft_cmd {
- enum ft_cmd_state state;
u32 lun; /* LUN from request */
struct ft_sess *sess; /* session held for cmd */
struct fc_seq *seq; /* sequence in exchange mgr */
@@ -127,7 +120,7 @@ struct ft_cmd {
struct fc_frame *req_frame;
unsigned char *cdb; /* pointer to CDB inside frame */
u32 write_data_len; /* data received on writes */
- struct se_queue_req se_req;
+ struct work_struct work;
/* Local sense buffer */
unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER];
u32 was_ddp_setup:1; /* Set only if ddp is setup */
@@ -177,7 +170,6 @@ int ft_is_state_remove(struct se_cmd *);
/*
* other internal functions.
*/
-int ft_thread(void *);
void ft_recv_req(struct ft_sess *, struct fc_frame *);
struct ft_tpg *ft_lport_find_tpg(struct fc_lport *);
struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *);
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index 5654dc22f7a..80fbcde00cb 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -62,8 +62,8 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller)
int count;
se_cmd = &cmd->se_cmd;
- pr_debug("%s: cmd %p state %d sess %p seq %p se_cmd %p\n",
- caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd);
+ pr_debug("%s: cmd %p sess %p seq %p se_cmd %p\n",
+ caller, cmd, cmd->sess, cmd->seq, se_cmd);
pr_debug("%s: cmd %p cdb %p\n",
caller, cmd, cmd->cdb);
pr_debug("%s: cmd %p lun %d\n", caller, cmd, cmd->lun);
@@ -90,38 +90,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller)
16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
}
-static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
-{
- struct ft_tpg *tpg = sess->tport->tpg;
- struct se_queue_obj *qobj = &tpg->qobj;
- unsigned long flags;
-
- qobj = &sess->tport->tpg->qobj;
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list);
- atomic_inc(&qobj->queue_cnt);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
- wake_up_process(tpg->thread);
-}
-
-static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj)
-{
- unsigned long flags;
- struct se_queue_req *qr;
-
- spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
- if (list_empty(&qobj->qobj_list)) {
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return NULL;
- }
- qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list);
- list_del(&qr->qr_list);
- atomic_dec(&qobj->queue_cnt);
- spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
- return container_of(qr, struct ft_cmd, se_req);
-}
-
static void ft_free_cmd(struct ft_cmd *cmd)
{
struct fc_frame *fp;
@@ -282,9 +250,7 @@ u32 ft_get_task_tag(struct se_cmd *se_cmd)
int ft_get_cmd_state(struct se_cmd *se_cmd)
{
- struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
-
- return cmd->state;
+ return 0;
}
int ft_is_state_remove(struct se_cmd *se_cmd)
@@ -505,6 +471,8 @@ int ft_queue_tm_resp(struct se_cmd *se_cmd)
return 0;
}
+static void ft_send_work(struct work_struct *work);
+
/*
* Handle incoming FCP command.
*/
@@ -523,7 +491,9 @@ static void ft_recv_cmd(struct ft_sess *sess, struct fc_frame *fp)
goto busy;
}
cmd->req_frame = fp; /* hold frame during cmd */
- ft_queue_cmd(sess, cmd);
+
+ INIT_WORK(&cmd->work, ft_send_work);
+ queue_work(sess->tport->tpg->workqueue, &cmd->work);
return;
busy:
@@ -563,12 +533,13 @@ void ft_recv_req(struct ft_sess *sess, struct fc_frame *fp)
/*
* Send new command to target.
*/
-static void ft_send_cmd(struct ft_cmd *cmd)
+static void ft_send_work(struct work_struct *work)
{
+ struct ft_cmd *cmd = container_of(work, struct ft_cmd, work);
struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame);
struct se_cmd *se_cmd;
struct fcp_cmnd *fcp;
- int data_dir;
+ int data_dir = 0;
u32 data_len;
int task_attr;
int ret;
@@ -675,42 +646,3 @@ static void ft_send_cmd(struct ft_cmd *cmd)
err:
ft_send_resp_code_and_free(cmd, FCP_CMND_FIELDS_INVALID);
}
-
-/*
- * Handle request in the command thread.
- */
-static void ft_exec_req(struct ft_cmd *cmd)
-{
- pr_debug("cmd state %x\n", cmd->state);
- switch (cmd->state) {
- case FC_CMD_ST_NEW:
- ft_send_cmd(cmd);
- break;
- default:
- break;
- }
-}
-
-/*
- * Processing thread.
- * Currently one thread per tpg.
- */
-int ft_thread(void *arg)
-{
- struct ft_tpg *tpg = arg;
- struct se_queue_obj *qobj = &tpg->qobj;
- struct ft_cmd *cmd;
-
- while (!kthread_should_stop()) {
- schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
- if (kthread_should_stop())
- goto out;
-
- cmd = ft_dequeue_cmd(qobj);
- if (cmd)
- ft_exec_req(cmd);
- }
-
-out:
- return 0;
-}
diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c
index b15879d43e2..8fa39b74f22 100644
--- a/drivers/target/tcm_fc/tfc_conf.c
+++ b/drivers/target/tcm_fc/tfc_conf.c
@@ -327,7 +327,6 @@ static struct se_portal_group *ft_add_tpg(
tpg->index = index;
tpg->lport_acl = lacl;
INIT_LIST_HEAD(&tpg->lun_list);
- transport_init_queue_obj(&tpg->qobj);
ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg,
tpg, TRANSPORT_TPG_TYPE_NORMAL);
@@ -336,8 +335,8 @@ static struct se_portal_group *ft_add_tpg(
return NULL;
}
- tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index);
- if (IS_ERR(tpg->thread)) {
+ tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1);
+ if (!tpg->workqueue) {
kfree(tpg);
return NULL;
}
@@ -356,7 +355,7 @@ static void ft_del_tpg(struct se_portal_group *se_tpg)
pr_debug("del tpg %s\n",
config_item_name(&tpg->se_tpg.tpg_group.cg_item));
- kthread_stop(tpg->thread);
+ destroy_workqueue(tpg->workqueue);
/* Wait for sessions to be freed thru RCU, for BUG_ON below */
synchronize_rcu();
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index c37f4cd9645..d35ea5a3d56 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -219,43 +219,41 @@ void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp)
if (cmd->was_ddp_setup) {
BUG_ON(!ep);
BUG_ON(!lport);
- }
-
- /*
- * Doesn't expect payload if DDP is setup. Payload
- * is expected to be copied directly to user buffers
- * due to DDP (Large Rx offload),
- */
- buf = fc_frame_payload_get(fp, 1);
- if (buf)
- pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
+ /*
+ * Since DDP (Large Rx offload) was setup for this request,
+ * payload is expected to be copied directly to user buffers.
+ */
+ buf = fc_frame_payload_get(fp, 1);
+ if (buf)
+ pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
"cmd->sg_cnt 0x%x. DDP was setup"
" hence not expected to receive frame with "
- "payload, Frame will be dropped if "
- "'Sequence Initiative' bit in f_ctl is "
+ "payload, Frame will be dropped if"
+ "'Sequence Initiative' bit in f_ctl is"
"not set\n", __func__, ep->xid, f_ctl,
cmd->sg, cmd->sg_cnt);
- /*
- * Invalidate HW DDP context if it was setup for respective
- * command. Invalidation of HW DDP context is requited in both
- * situation (success and error).
- */
- ft_invl_hw_context(cmd);
+ /*
+ * Invalidate HW DDP context if it was setup for respective
+ * command. Invalidation of HW DDP context is requited in both
+ * situation (success and error).
+ */
+ ft_invl_hw_context(cmd);
- /*
- * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
- * write data frame is received successfully where payload is
- * posted directly to user buffer and only the last frame's
- * header is posted in receive queue.
- *
- * If "Sequence Initiative (TSI)" bit is not set, means error
- * condition w.r.t. DDP, hence drop the packet and let explict
- * ABORTS from other end of exchange timer trigger the recovery.
- */
- if (f_ctl & FC_FC_SEQ_INIT)
- goto last_frame;
- else
- goto drop;
+ /*
+ * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
+ * write data frame is received successfully where payload is
+ * posted directly to user buffer and only the last frame's
+ * header is posted in receive queue.
+ *
+ * If "Sequence Initiative (TSI)" bit is not set, means error
+ * condition w.r.t. DDP, hence drop the packet and let explict
+ * ABORTS from other end of exchange timer trigger the recovery.
+ */
+ if (f_ctl & FC_FC_SEQ_INIT)
+ goto last_frame;
+ else
+ goto drop;
+ }
rel_off = ntohl(fh->fh_parm_offset);
frame_len = fr_len(fp);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b922f5d2e61..caba6730a94 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -46,7 +46,7 @@
#ifdef CONFIG_ARM
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#endif
#define PDC_BUFFER_SIZE 512
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 225123b37f1..58be715913c 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -4450,7 +4450,7 @@ static int __init rs_init(void)
#if defined(CONFIG_ETRAX_RS485)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
- if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
@@ -4459,7 +4459,7 @@ static int __init rs_init(void)
}
#endif
#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a60edb..d1b41933199 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -26,7 +26,7 @@
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1e96d1f1fe6..723f8231193 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,7 +761,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
memset(buf, 0, retval);
status = 0;
- mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC;
+ mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
spin_lock_irqsave(&xhci->lock, flags);
/* For each port, did anything change? If so, set that bit in buf. */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 54139a2f06c..952e2ded61a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1934,8 +1934,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
int status = -EINPROGRESS;
struct urb_priv *urb_priv;
struct xhci_ep_ctx *ep_ctx;
+ struct list_head *tmp;
u32 trb_comp_code;
int ret = 0;
+ int td_num = 0;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
@@ -1957,6 +1959,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
return -ENODEV;
}
+ /* Count current td numbers if ep->skip is set */
+ if (ep->skip) {
+ list_for_each(tmp, &ep_ring->td_list)
+ td_num++;
+ }
+
event_dma = le64_to_cpu(event->buffer);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
/* Look for common error cases */
@@ -2068,7 +2076,18 @@ static int handle_tx_event(struct xhci_hcd *xhci,
goto cleanup;
}
+ /* We've skipped all the TDs on the ep ring when ep->skip set */
+ if (ep->skip && td_num == 0) {
+ ep->skip = false;
+ xhci_dbg(xhci, "All tds on the ep_ring skipped. "
+ "Clear skip flag.\n");
+ ret = 0;
+ goto cleanup;
+ }
+
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+ if (ep->skip)
+ td_num--;
/* Is this a TRB in the currently executing TD? */
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a8b02..f9a3f62a83b 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
#include <mach/hardware.h>
#include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <mach/cputype.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 817ab60f753..dda920623c6 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -21,7 +21,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 10459d8bd9a..4b24f549f9b 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -24,7 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 8df688748b5..622ad839fd9 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 9fff86f67bd..12cc52a70f9 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index 0f5952cae85..062466402c0 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -26,7 +26,7 @@
#include <linux/delay.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b87e8b83f29..6f8d13c4120 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,7 +23,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
index 564933ffac6..b8fd5b2ec29 100644
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -23,7 +23,7 @@
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index ff0e6d7ab3a..b51b332e5a2 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,7 +29,7 @@ GPIO13 - screen blanking
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "omapfb.h"
static int palmtt_panel_init(struct lcd_panel *panel,
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 5ec4f2d439c..50e00395240 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#include "sdum.h"
#include "fbcommon.h"
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 410fba45378..809cbda03d7 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -494,15 +494,16 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
asminline_call(&cmn_regs, cru_rom_addr);
die_nmi_called = 1;
spin_unlock_irqrestore(&rom_lock, rom_pl);
+
+ if (allow_kdump)
+ hpwdt_stop();
+
if (!is_icru) {
if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
+ panic("An NMI occurred, "
"but unable to determine source.\n");
}
}
-
- if (allow_kdump)
- hpwdt_stop();
panic("An NMI occurred, please see the Integrated "
"Management Log for details.\n");
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
index 7d82adac1cb..102aed0efbf 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -51,16 +51,16 @@ static int ltq_wdt_ok_to_close;
static void
ltq_wdt_enable(void)
{
- ltq_wdt_timeout = ltq_wdt_timeout *
+ unsigned long int timeout = ltq_wdt_timeout *
(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
- if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
- ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+ if (timeout > LTQ_MAX_TIMEOUT)
+ timeout = LTQ_MAX_TIMEOUT;
/* write the first password magic */
ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
/* write the second magic plus the configuration and new timeout */
ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
- LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+ LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR);
}
static void
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index 3066a5127ca..eaca366b723 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -173,7 +173,7 @@ static struct notifier_block epx_c3_notifier = {
.notifier_call = epx_c3_notify_sys,
};
-static const char banner[] __initdata = KERN_INFO PFX
+static const char banner[] __initconst = KERN_INFO PFX
"Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
static int __init watchdog_init(void)
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index d33520d0b4c..1199da0f98c 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -59,7 +59,7 @@ static struct watchdog_device *wdd;
static int watchdog_ping(struct watchdog_device *wddev)
{
- if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (test_bit(WDOG_ACTIVE, &wddev->status)) {
if (wddev->ops->ping)
return wddev->ops->ping(wddev); /* ping the watchdog */
else
@@ -81,12 +81,12 @@ static int watchdog_start(struct watchdog_device *wddev)
{
int err;
- if (!test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (!test_bit(WDOG_ACTIVE, &wddev->status)) {
err = wddev->ops->start(wddev);
if (err < 0)
return err;
- set_bit(WDOG_ACTIVE, &wdd->status);
+ set_bit(WDOG_ACTIVE, &wddev->status);
}
return 0;
}
@@ -105,18 +105,18 @@ static int watchdog_stop(struct watchdog_device *wddev)
{
int err = -EBUSY;
- if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
+ if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) {
pr_info("%s: nowayout prevents watchdog to be stopped!\n",
- wdd->info->identity);
+ wddev->info->identity);
return err;
}
- if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+ if (test_bit(WDOG_ACTIVE, &wddev->status)) {
err = wddev->ops->stop(wddev);
if (err < 0)
return err;
- clear_bit(WDOG_ACTIVE, &wdd->status);
+ clear_bit(WDOG_ACTIVE, &wddev->status);
}
return 0;
}
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index da70f5c32eb..7523719bf8a 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -54,7 +54,7 @@
* This lock protects updates to the following mapping and reference-count
* arrays. The lock does not need to be acquired to read the mapping tables.
*/
-static DEFINE_SPINLOCK(irq_mapping_update_lock);
+static DEFINE_MUTEX(irq_mapping_update_lock);
static LIST_HEAD(xen_irq_list_head);
@@ -631,7 +631,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
int irq = -1;
struct physdev_irq irq_op;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = find_irq_by_gsi(gsi);
if (irq != -1) {
@@ -684,7 +684,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi,
handle_edge_irq, name);
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
@@ -710,7 +710,7 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
{
int irq, ret;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = xen_allocate_irq_dynamic();
if (irq == -1)
@@ -724,10 +724,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
if (ret < 0)
goto error_irq;
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
error_irq:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
xen_free_irq(irq);
return -1;
}
@@ -740,7 +740,7 @@ int xen_destroy_irq(int irq)
struct irq_info *info = info_for_irq(irq);
int rc = -ENOENT;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
desc = irq_to_desc(irq);
if (!desc)
@@ -766,7 +766,7 @@ int xen_destroy_irq(int irq)
xen_free_irq(irq);
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return rc;
}
@@ -776,7 +776,7 @@ int xen_irq_from_pirq(unsigned pirq)
struct irq_info *info;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
list_for_each_entry(info, &xen_irq_list_head, list) {
if (info == NULL || info->type != IRQT_PIRQ)
@@ -787,7 +787,7 @@ int xen_irq_from_pirq(unsigned pirq)
}
irq = -1;
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
@@ -802,7 +802,7 @@ int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = evtchn_to_irq[evtchn];
@@ -818,7 +818,7 @@ int bind_evtchn_to_irq(unsigned int evtchn)
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
@@ -829,7 +829,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
struct evtchn_bind_ipi bind_ipi;
int evtchn, irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = per_cpu(ipi_to_irq, cpu)[ipi];
@@ -853,7 +853,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu)
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
@@ -878,7 +878,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu)
struct evtchn_bind_virq bind_virq;
int evtchn, irq;
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
irq = per_cpu(virq_to_irq, cpu)[virq];
@@ -903,7 +903,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu)
}
out:
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
return irq;
}
@@ -913,7 +913,7 @@ static void unbind_from_irq(unsigned int irq)
struct evtchn_close close;
int evtchn = evtchn_from_irq(irq);
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
if (VALID_EVTCHN(evtchn)) {
close.port = evtchn;
@@ -943,7 +943,7 @@ static void unbind_from_irq(unsigned int irq)
xen_free_irq(irq);
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
}
int bind_evtchn_to_irqhandler(unsigned int evtchn,
@@ -1279,7 +1279,7 @@ void rebind_evtchn_irq(int evtchn, int irq)
will also be masked. */
disable_irq(irq);
- spin_lock(&irq_mapping_update_lock);
+ mutex_lock(&irq_mapping_update_lock);
/* After resume the irq<->evtchn mappings are all cleared out */
BUG_ON(evtchn_to_irq[evtchn] != -1);
@@ -1289,7 +1289,7 @@ void rebind_evtchn_irq(int evtchn, int irq)
xen_irq_info_evtchn_init(irq, evtchn);
- spin_unlock(&irq_mapping_update_lock);
+ mutex_unlock(&irq_mapping_update_lock);
/* new event channels are always bound to cpu 0 */
irq_set_affinity(irq, cpumask_of(0));
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index e0c2807b097..181fa8158a8 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -148,10 +148,10 @@ static int __init amiga_zorro_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, bus);
- /* Register all devices */
pr_info("Zorro: Probing AutoConfig expansion devices: %u device%s\n",
zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+ /* First identify all devices ... */
for (i = 0; i < zorro_num_autocon; i++) {
z = &zorro_autocon[i];
z->id = (z->rom.er_Manufacturer<<16) | (z->rom.er_Product<<8);
@@ -172,6 +172,11 @@ static int __init amiga_zorro_probe(struct platform_device *pdev)
dev_set_name(&z->dev, "%02x", i);
z->dev.parent = &bus->dev;
z->dev.bus = &zorro_bus_type;
+ }
+
+ /* ... then register them */
+ for (i = 0; i < zorro_num_autocon; i++) {
+ z = &zorro_autocon[i];
error = device_register(&z->dev);
if (error) {
dev_err(&bus->dev, "Error registering device %s\n",
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 3c3abff731a..e4e57d59edb 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1036,11 +1036,13 @@ out:
* on error we return an unlocked page and the error value
* on success we return a locked page and 0
*/
-static int prepare_uptodate_page(struct page *page, u64 pos)
+static int prepare_uptodate_page(struct page *page, u64 pos,
+ bool force_uptodate)
{
int ret = 0;
- if ((pos & (PAGE_CACHE_SIZE - 1)) && !PageUptodate(page)) {
+ if (((pos & (PAGE_CACHE_SIZE - 1)) || force_uptodate) &&
+ !PageUptodate(page)) {
ret = btrfs_readpage(NULL, page);
if (ret)
return ret;
@@ -1061,7 +1063,7 @@ static int prepare_uptodate_page(struct page *page, u64 pos)
static noinline int prepare_pages(struct btrfs_root *root, struct file *file,
struct page **pages, size_t num_pages,
loff_t pos, unsigned long first_index,
- size_t write_bytes)
+ size_t write_bytes, bool force_uptodate)
{
struct extent_state *cached_state = NULL;
int i;
@@ -1086,10 +1088,11 @@ again:
}
if (i == 0)
- err = prepare_uptodate_page(pages[i], pos);
+ err = prepare_uptodate_page(pages[i], pos,
+ force_uptodate);
if (i == num_pages - 1)
err = prepare_uptodate_page(pages[i],
- pos + write_bytes);
+ pos + write_bytes, false);
if (err) {
page_cache_release(pages[i]);
faili = i - 1;
@@ -1158,6 +1161,7 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
size_t num_written = 0;
int nrptrs;
int ret = 0;
+ bool force_page_uptodate = false;
nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
@@ -1200,7 +1204,8 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
* contents of pages from loop to loop
*/
ret = prepare_pages(root, file, pages, num_pages,
- pos, first_index, write_bytes);
+ pos, first_index, write_bytes,
+ force_page_uptodate);
if (ret) {
btrfs_delalloc_release_space(inode,
num_pages << PAGE_CACHE_SHIFT);
@@ -1217,12 +1222,15 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file,
if (copied < write_bytes)
nrptrs = 1;
- if (copied == 0)
+ if (copied == 0) {
+ force_page_uptodate = true;
dirty_pages = 0;
- else
+ } else {
+ force_page_uptodate = false;
dirty_pages = (copied + offset +
PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT;
+ }
/*
* If we had a short copy we need to release the excess delaloc
@@ -1817,6 +1825,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin)
goto out;
case SEEK_DATA:
case SEEK_HOLE:
+ if (offset >= i_size_read(inode)) {
+ mutex_unlock(&inode->i_mutex);
+ return -ENXIO;
+ }
+
ret = find_desired_extent(inode, &offset, origin);
if (ret) {
mutex_unlock(&inode->i_mutex);
@@ -1825,11 +1838,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin)
}
if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) {
- ret = -EINVAL;
+ offset = -EINVAL;
goto out;
}
if (offset > inode->i_sb->s_maxbytes) {
- ret = -EINVAL;
+ offset = -EINVAL;
goto out;
}
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 4d14de6d121..b2d004ad66a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4018,7 +4018,8 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
memcpy(&location, dentry->d_fsdata, sizeof(struct btrfs_key));
kfree(dentry->d_fsdata);
dentry->d_fsdata = NULL;
- d_clear_need_lookup(dentry);
+ /* This thing is hashed, drop it for now */
+ d_drop(dentry);
} else {
ret = btrfs_inode_by_name(dir, dentry, &location);
}
@@ -4085,7 +4086,15 @@ static void btrfs_dentry_release(struct dentry *dentry)
static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
- return d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+ struct dentry *ret;
+
+ ret = d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+ if (unlikely(d_need_lookup(dentry))) {
+ spin_lock(&dentry->d_lock);
+ dentry->d_flags &= ~DCACHE_NEED_LOOKUP;
+ spin_unlock(&dentry->d_lock);
+ }
+ return ret;
}
unsigned char btrfs_filetype_table[] = {
@@ -4125,7 +4134,8 @@ static int btrfs_real_readdir(struct file *filp, void *dirent,
/* special case for "." */
if (filp->f_pos == 0) {
- over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR);
+ over = filldir(dirent, ".", 1,
+ filp->f_pos, btrfs_ino(inode), DT_DIR);
if (over)
return 0;
filp->f_pos = 1;
@@ -4134,7 +4144,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent,
if (filp->f_pos == 1) {
u64 pino = parent_ino(filp->f_path.dentry);
over = filldir(dirent, "..", 2,
- 2, pino, DT_DIR);
+ filp->f_pos, pino, DT_DIR);
if (over)
return 0;
filp->f_pos = 2;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 3351b1b2457..538f65a79ec 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2177,6 +2177,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
if (!(src_file->f_mode & FMODE_READ))
goto out_fput;
+ /* don't make the dst file partly checksummed */
+ if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) !=
+ (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM))
+ goto out_fput;
+
ret = -EISDIR;
if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
goto out_fput;
@@ -2226,6 +2231,10 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
goto out_unlock;
}
+ /* truncate page cache pages from target inode range */
+ truncate_inode_pages_range(&inode->i_data, destoff,
+ PAGE_CACHE_ALIGN(destoff + len) - 1);
+
/* do any pending delalloc/csum calc on src, one way or
another, and lock file content */
while (1) {
@@ -2242,10 +2251,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
btrfs_wait_ordered_range(src, off, len);
}
- /* truncate page cache pages from target inode range */
- truncate_inode_pages_range(&inode->i_data, off,
- ALIGN(off + len, PAGE_CACHE_SIZE) - 1);
-
/* clone data */
key.objectid = btrfs_ino(src);
key.type = BTRFS_EXTENT_DATA_KEY;
@@ -2323,7 +2328,12 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
else
new_key.offset = destoff;
- trans = btrfs_start_transaction(root, 1);
+ /*
+ * 1 - adjusting old extent (we may have to split it)
+ * 1 - add new extent
+ * 1 - inode update
+ */
+ trans = btrfs_start_transaction(root, 3);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out;
@@ -2442,7 +2452,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
if (endoff > inode->i_size)
btrfs_i_size_write(inode, endoff);
- BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
btrfs_end_transaction(trans, root);
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index e76bfeb6826..30acd22147e 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -351,9 +351,7 @@ static int
build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp)
{
unsigned int dlen;
- unsigned int wlen;
- unsigned int size = 6 * sizeof(struct ntlmssp2_name);
- __le64 curtime;
+ unsigned int size = 2 * sizeof(struct ntlmssp2_name);
char *defdmname = "WORKGROUP";
unsigned char *blobptr;
struct ntlmssp2_name *attrptr;
@@ -365,15 +363,14 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp)
}
dlen = strlen(ses->domainName);
- wlen = strlen(ses->server->hostname);
- /* The length of this blob is a size which is
- * six times the size of a structure which holds name/size +
- * two times the unicode length of a domain name +
- * two times the unicode length of a server name +
- * size of a timestamp (which is 8 bytes).
+ /*
+ * The length of this blob is two times the size of a
+ * structure (av pair) which holds name/size
+ * ( for NTLMSSP_AV_NB_DOMAIN_NAME followed by NTLMSSP_AV_EOL ) +
+ * unicode length of a netbios domain name
*/
- ses->auth_key.len = size + 2 * (2 * dlen) + 2 * (2 * wlen) + 8;
+ ses->auth_key.len = size + 2 * dlen;
ses->auth_key.response = kzalloc(ses->auth_key.len, GFP_KERNEL);
if (!ses->auth_key.response) {
ses->auth_key.len = 0;
@@ -384,44 +381,15 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp)
blobptr = ses->auth_key.response;
attrptr = (struct ntlmssp2_name *) blobptr;
+ /*
+ * As defined in MS-NTLM 3.3.2, just this av pair field
+ * is sufficient as part of the temp
+ */
attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME);
attrptr->length = cpu_to_le16(2 * dlen);
blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
- blobptr += 2 * dlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_COMPUTER_NAME);
- attrptr->length = cpu_to_le16(2 * wlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
- blobptr += 2 * wlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_DOMAIN_NAME);
- attrptr->length = cpu_to_le16(2 * dlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
-
- blobptr += 2 * dlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_COMPUTER_NAME);
- attrptr->length = cpu_to_le16(2 * wlen);
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
- blobptr += 2 * wlen;
- attrptr = (struct ntlmssp2_name *) blobptr;
-
- attrptr->type = cpu_to_le16(NTLMSSP_AV_TIMESTAMP);
- attrptr->length = cpu_to_le16(sizeof(__le64));
- blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
- curtime = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- memcpy(blobptr, &curtime, sizeof(__le64));
-
return 0;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index f93eb948d07..54b8f1e7da9 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -548,6 +548,12 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb)
struct inode *dir = dentry->d_inode;
struct dentry *child;
+ if (!dir) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOENT);
+ break;
+ }
+
/* skip separators */
while (*s == sep)
s++;
@@ -563,10 +569,6 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb)
mutex_unlock(&dir->i_mutex);
dput(dentry);
dentry = child;
- if (!dentry->d_inode) {
- dput(dentry);
- dentry = ERR_PTR(-ENOENT);
- }
} while (!IS_ERR(dentry));
_FreeXid(xid);
kfree(full_path);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index aac37d99a48..a80f7bd97b9 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -4079,7 +4079,8 @@ int CIFSFindNext(const int xid, struct cifs_tcon *tcon,
T2_FNEXT_RSP_PARMS *parms;
char *response_data;
int rc = 0;
- int bytes_returned, name_len;
+ int bytes_returned;
+ unsigned int name_len;
__u16 params, byte_count;
cFYI(1, "In FindNext");
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 633c246b677..f4af4cc3750 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1298,7 +1298,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
/* ignore */
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
- } else if (strnicmp(data, "rw", 2) == 0) {
+ } else if (strnicmp(data, "rw", 2) == 0 && strlen(data) == 2) {
/* ignore */
} else if (strnicmp(data, "ro", 2) == 0) {
/* ignore */
@@ -1401,7 +1401,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname,
vol->server_ino = 1;
} else if (strnicmp(data, "noserverino", 9) == 0) {
vol->server_ino = 0;
- } else if (strnicmp(data, "rwpidforward", 4) == 0) {
+ } else if (strnicmp(data, "rwpidforward", 12) == 0) {
vol->rwpidforward = 1;
} else if (strnicmp(data, "cifsacl", 7) == 0) {
vol->cifs_acl = 1;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 04da6acde85..12661e1deed 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1134,7 +1134,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode,
return bh;
if (buffer_uptodate(bh))
return bh;
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
@@ -2807,7 +2807,7 @@ make_io:
trace_ext3_load_inode(inode);
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
- submit_bh(READ_META, bh);
+ submit_bh(READ | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
ext3_error(inode->i_sb, "ext3_get_inode_loc",
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 5571708b6a5..0629e09f651 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -922,7 +922,8 @@ restart:
bh = ext3_getblk(NULL, dir, b++, 0, &err);
bh_use[ra_max] = bh;
if (bh)
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO,
+ 1, &bh);
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 18d2558b762..986e2388f03 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -647,7 +647,7 @@ struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode,
return bh;
if (buffer_uptodate(bh))
return bh;
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
@@ -3298,7 +3298,7 @@ make_io:
trace_ext4_load_inode(inode);
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
- submit_bh(READ_META, bh);
+ submit_bh(READ | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
EXT4_ERROR_INODE_BLOCK(inode, block,
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index f8068c7bae9..1c924faeb6c 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -922,7 +922,8 @@ restart:
bh = ext4_getblk(NULL, dir, b++, 0, &err);
bh_use[ra_max] = bh;
if (bh)
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO,
+ 1, &bh);
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 85c62923ee2..59864643436 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -624,9 +624,9 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull)
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
- submit_bh(WRITE_SYNC | REQ_META, bh);
+ submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh);
else
- submit_bh(WRITE_FLUSH_FUA | REQ_META, bh);
+ submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 747238cd9f9..be29858900f 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -37,7 +37,7 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb
{
struct buffer_head *bh, *head;
int nr_underway = 0;
- int write_op = REQ_META |
+ int write_op = REQ_META | REQ_PRIO |
(wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE);
BUG_ON(!PageLocked(page));
@@ -225,7 +225,7 @@ int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags,
}
bh->b_end_io = end_buffer_read_sync;
get_bh(bh);
- submit_bh(READ_SYNC | REQ_META, bh);
+ submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh);
if (!(flags & DIO_WAIT))
return 0;
@@ -435,7 +435,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen)
if (buffer_uptodate(first_bh))
goto out;
if (!buffer_locked(first_bh))
- ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh);
+ ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh);
dblock++;
extlen--;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3bc073a4cf8..079587e5384 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -224,7 +224,7 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent)
bio->bi_end_io = end_bio_io_page;
bio->bi_private = page;
- submit_bio(READ_SYNC | REQ_META, bio);
+ submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio);
wait_on_page_locked(page);
bio_put(bio);
if (!PageUptodate(page)) {
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 42e8d23bc04..0e8bb13381e 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -709,7 +709,7 @@ get_a_page:
set_buffer_uptodate(bh);
if (!buffer_uptodate(bh)) {
- ll_rw_block(READ_META, 1, &bh);
+ ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh))
goto unlock_out;
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index c106ca22e81..d24a9b666a2 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -344,6 +344,7 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
struct inode *root, *inode;
struct qstr str;
struct nls_table *nls = NULL;
+ u64 last_fs_block, last_fs_page;
int err;
err = -EINVAL;
@@ -399,9 +400,13 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
if (!sbi->rsrc_clump_blocks)
sbi->rsrc_clump_blocks = 1;
- err = generic_check_addressable(sbi->alloc_blksz_shift,
- sbi->total_blocks);
- if (err) {
+ err = -EFBIG;
+ last_fs_block = sbi->total_blocks - 1;
+ last_fs_page = (last_fs_block << sbi->alloc_blksz_shift) >>
+ PAGE_CACHE_SHIFT;
+
+ if ((last_fs_block > (sector_t)(~0ULL) >> (sbi->alloc_blksz_shift - 9)) ||
+ (last_fs_page > (pgoff_t)(~0ULL))) {
printk(KERN_ERR "hfs: filesystem size too large.\n");
goto out_free_vhdr;
}
@@ -525,8 +530,8 @@ out_close_cat_tree:
out_close_ext_tree:
hfs_btree_close(sbi->ext_tree);
out_free_vhdr:
- kfree(sbi->s_vhdr);
- kfree(sbi->s_backup_vhdr);
+ kfree(sbi->s_vhdr_buf);
+ kfree(sbi->s_backup_vhdr_buf);
out_unload_nls:
unload_nls(sbi->nls);
unload_nls(nls);
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 10e515a0d45..7daf4b852d1 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -272,9 +272,9 @@ reread:
return 0;
out_free_backup_vhdr:
- kfree(sbi->s_backup_vhdr);
+ kfree(sbi->s_backup_vhdr_buf);
out_free_vhdr:
- kfree(sbi->s_vhdr);
+ kfree(sbi->s_vhdr_buf);
out:
return error;
}
diff --git a/fs/namei.c b/fs/namei.c
index b52bc685465..0b3138de2a3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -721,12 +721,6 @@ static int follow_automount(struct path *path, unsigned flags,
if (!path->dentry->d_op || !path->dentry->d_op->d_automount)
return -EREMOTE;
- /* We don't want to mount if someone supplied AT_NO_AUTOMOUNT
- * and this is the terminal part of the path.
- */
- if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT))
- return -EISDIR; /* we actually want to stop here */
-
/* We don't want to mount if someone's just doing a stat -
* unless they're stat'ing a directory and appended a '/' to
* the name.
@@ -739,7 +733,7 @@ static int follow_automount(struct path *path, unsigned flags,
* of the daemon to instantiate them before they can be used.
*/
if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY |
- LOOKUP_OPEN | LOOKUP_CREATE)) &&
+ LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) &&
path->dentry->d_inode)
return -EISDIR;
@@ -2616,6 +2610,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry)
if (!dir->i_op->rmdir)
return -EPERM;
+ dget(dentry);
mutex_lock(&dentry->d_inode->i_mutex);
error = -EBUSY;
@@ -2636,6 +2631,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry)
out:
mutex_unlock(&dentry->d_inode->i_mutex);
+ dput(dentry);
if (!error)
d_delete(dentry);
return error;
@@ -3025,6 +3021,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
if (error)
return error;
+ dget(new_dentry);
if (target)
mutex_lock(&target->i_mutex);
@@ -3045,6 +3042,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry,
out:
if (target)
mutex_unlock(&target->i_mutex);
+ dput(new_dentry);
if (!error)
if (!(old_dir->i_sb->s_type->fs_flags & FS_RENAME_DOES_D_MOVE))
d_move(old_dentry,new_dentry);
diff --git a/fs/namespace.c b/fs/namespace.c
index 22bfe8273c6..b4febb29d3b 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1757,7 +1757,7 @@ static int do_loopback(struct path *path, char *old_name,
return err;
if (!old_name || !*old_name)
return -EINVAL;
- err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
+ err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path);
if (err)
return err;
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 1ec1a85fa71..3e93e9a1bee 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -56,6 +56,9 @@ enum nfs4_session_state {
NFS4_SESSION_DRAINING,
};
+#define NFS4_RENEW_TIMEOUT 0x01
+#define NFS4_RENEW_DELEGATION_CB 0x02
+
struct nfs4_minor_version_ops {
u32 minor_version;
@@ -225,7 +228,7 @@ struct nfs4_state_recovery_ops {
};
struct nfs4_state_maintenance_ops {
- int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *);
+ int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *, unsigned);
struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *);
int (*renew_lease)(struct nfs_client *, struct rpc_cred *);
};
@@ -237,8 +240,6 @@ extern const struct inode_operations nfs4_dir_inode_operations;
extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *);
extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *);
extern int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred);
-extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *);
-extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *);
extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *);
extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *);
extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc);
@@ -349,6 +350,7 @@ extern void nfs4_close_sync(struct nfs4_state *, fmode_t);
extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t);
extern void nfs4_schedule_lease_recovery(struct nfs_client *);
extern void nfs4_schedule_state_manager(struct nfs_client *);
+extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp);
extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *);
extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
extern void nfs41_handle_recall_slot(struct nfs_client *clp);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 8c77039e7a8..4700fae1ada 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3374,9 +3374,13 @@ static void nfs4_renew_done(struct rpc_task *task, void *calldata)
if (task->tk_status < 0) {
/* Unless we're shutting down, schedule state recovery! */
- if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+ if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0)
+ return;
+ if (task->tk_status != NFS4ERR_CB_PATH_DOWN) {
nfs4_schedule_lease_recovery(clp);
- return;
+ return;
+ }
+ nfs4_schedule_path_down_recovery(clp);
}
do_renew_lease(clp, timestamp);
}
@@ -3386,7 +3390,7 @@ static const struct rpc_call_ops nfs4_renew_ops = {
.rpc_release = nfs4_renew_release,
};
-int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
{
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW],
@@ -3395,9 +3399,11 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred)
};
struct nfs4_renewdata *data;
+ if (renew_flags == 0)
+ return 0;
if (!atomic_inc_not_zero(&clp->cl_count))
return -EIO;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
+ data = kmalloc(sizeof(*data), GFP_NOFS);
if (data == NULL)
return -ENOMEM;
data->client = clp;
@@ -3406,7 +3412,7 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred)
&nfs4_renew_ops, data);
}
-int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
{
struct rpc_message msg = {
.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW],
@@ -5504,11 +5510,13 @@ static struct rpc_task *_nfs41_proc_sequence(struct nfs_client *clp, struct rpc_
return rpc_run_task(&task_setup_data);
}
-static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
{
struct rpc_task *task;
int ret = 0;
+ if ((renew_flags & NFS4_RENEW_TIMEOUT) == 0)
+ return 0;
task = _nfs41_proc_sequence(clp, cred);
if (IS_ERR(task))
ret = PTR_ERR(task);
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index df8e7f3ca56..dc484c0eae7 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -60,6 +60,7 @@ nfs4_renew_state(struct work_struct *work)
struct rpc_cred *cred;
long lease;
unsigned long last, now;
+ unsigned renew_flags = 0;
ops = clp->cl_mvops->state_renewal_ops;
dprintk("%s: start\n", __func__);
@@ -72,18 +73,23 @@ nfs4_renew_state(struct work_struct *work)
last = clp->cl_last_renewal;
now = jiffies;
/* Are we close to a lease timeout? */
- if (time_after(now, last + lease/3)) {
+ if (time_after(now, last + lease/3))
+ renew_flags |= NFS4_RENEW_TIMEOUT;
+ if (nfs_delegations_present(clp))
+ renew_flags |= NFS4_RENEW_DELEGATION_CB;
+
+ if (renew_flags != 0) {
cred = ops->get_state_renewal_cred_locked(clp);
spin_unlock(&clp->cl_lock);
if (cred == NULL) {
- if (!nfs_delegations_present(clp)) {
+ if (!(renew_flags & NFS4_RENEW_DELEGATION_CB)) {
set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
goto out;
}
nfs_expire_all_delegations(clp);
} else {
/* Queue an asynchronous RENEW. */
- ops->sched_state_renewal(clp, cred);
+ ops->sched_state_renewal(clp, cred, renew_flags);
put_rpccred(cred);
goto out_exp;
}
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 72ab97ef3d6..39914be40b0 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1038,6 +1038,12 @@ void nfs4_schedule_lease_recovery(struct nfs_client *clp)
nfs4_schedule_state_manager(clp);
}
+void nfs4_schedule_path_down_recovery(struct nfs_client *clp)
+{
+ nfs_handle_cb_pathdown(clp);
+ nfs4_schedule_state_manager(clp);
+}
+
static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
{
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index b961ceac66b..5b19b6aabe1 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2035,9 +2035,6 @@ static inline void nfs_initialise_sb(struct super_block *sb)
sb->s_blocksize = nfs_block_bits(server->wsize,
&sb->s_blocksize_bits);
- if (server->flags & NFS_MOUNT_NOAC)
- sb->s_flags |= MS_SYNCHRONOUS;
-
sb->s_bdi = &server->backing_dev_info;
nfs_super_set_maxbytes(sb, server->maxfilesize);
@@ -2249,6 +2246,10 @@ static struct dentry *nfs_fs_mount(struct file_system_type *fs_type,
if (server->flags & NFS_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
@@ -2361,6 +2362,10 @@ nfs_xdev_mount(struct file_system_type *fs_type, int flags,
if (server->flags & NFS_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
@@ -2628,6 +2633,10 @@ nfs4_remote_mount(struct file_system_type *fs_type, int flags,
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
@@ -2789,7 +2798,7 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt,
goto out_put_mnt_ns;
ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
- export_path, LOOKUP_FOLLOW, &path);
+ export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
nfs_referral_loop_unprotect();
put_mnt_ns(ns_private);
@@ -2916,6 +2925,10 @@ nfs4_xdev_mount(struct file_system_type *fs_type, int flags,
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
@@ -3003,6 +3016,10 @@ nfs4_remote_referral_mount(struct file_system_type *fs_type, int flags,
if (server->flags & NFS4_MOUNT_UNSHARED)
compare_super = NULL;
+ /* -o noac implies -o sync */
+ if (server->flags & NFS_MOUNT_NOAC)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
if (IS_ERR(s)) {
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index b39b37f8091..c9bd2a6b7d4 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -958,7 +958,7 @@ static int nfs_flush_multi(struct nfs_pageio_descriptor *desc, struct list_head
if (!data)
goto out_bad;
data->pagevec[0] = page;
- nfs_write_rpcsetup(req, data, wsize, offset, desc->pg_ioflags);
+ nfs_write_rpcsetup(req, data, len, offset, desc->pg_ioflags);
list_add(&data->list, res);
requests++;
nbytes -= len;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 25b6a887adb..5afaa58a863 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -877,30 +877,54 @@ struct numa_maps_private {
struct numa_maps md;
};
-static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty)
+static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty,
+ unsigned long nr_pages)
{
int count = page_mapcount(page);
- md->pages++;
+ md->pages += nr_pages;
if (pte_dirty || PageDirty(page))
- md->dirty++;
+ md->dirty += nr_pages;
if (PageSwapCache(page))
- md->swapcache++;
+ md->swapcache += nr_pages;
if (PageActive(page) || PageUnevictable(page))
- md->active++;
+ md->active += nr_pages;
if (PageWriteback(page))
- md->writeback++;
+ md->writeback += nr_pages;
if (PageAnon(page))
- md->anon++;
+ md->anon += nr_pages;
if (count > md->mapcount_max)
md->mapcount_max = count;
- md->node[page_to_nid(page)]++;
+ md->node[page_to_nid(page)] += nr_pages;
+}
+
+static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ struct page *page;
+ int nid;
+
+ if (!pte_present(pte))
+ return NULL;
+
+ page = vm_normal_page(vma, addr, pte);
+ if (!page)
+ return NULL;
+
+ if (PageReserved(page))
+ return NULL;
+
+ nid = page_to_nid(page);
+ if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
+ return NULL;
+
+ return page;
}
static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
@@ -912,26 +936,32 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
pte_t *pte;
md = walk->private;
- orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
- do {
- struct page *page;
- int nid;
+ spin_lock(&walk->mm->page_table_lock);
+ if (pmd_trans_huge(*pmd)) {
+ if (pmd_trans_splitting(*pmd)) {
+ spin_unlock(&walk->mm->page_table_lock);
+ wait_split_huge_page(md->vma->anon_vma, pmd);
+ } else {
+ pte_t huge_pte = *(pte_t *)pmd;
+ struct page *page;
- if (!pte_present(*pte))
- continue;
+ page = can_gather_numa_stats(huge_pte, md->vma, addr);
+ if (page)
+ gather_stats(page, md, pte_dirty(huge_pte),
+ HPAGE_PMD_SIZE/PAGE_SIZE);
+ spin_unlock(&walk->mm->page_table_lock);
+ return 0;
+ }
+ } else {
+ spin_unlock(&walk->mm->page_table_lock);
+ }
- page = vm_normal_page(md->vma, addr, *pte);
+ orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
+ do {
+ struct page *page = can_gather_numa_stats(*pte, md->vma, addr);
if (!page)
continue;
-
- if (PageReserved(page))
- continue;
-
- nid = page_to_nid(page);
- if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
- continue;
-
- gather_stats(page, md, pte_dirty(*pte));
+ gather_stats(page, md, pte_dirty(*pte), 1);
} while (pte++, addr += PAGE_SIZE, addr != end);
pte_unmap_unlock(orig_pte, ptl);
@@ -952,7 +982,7 @@ static int gather_hugetbl_stats(pte_t *pte, unsigned long hmask,
return 0;
md = walk->private;
- gather_stats(page, md, pte_dirty(*pte));
+ gather_stats(page, md, pte_dirty(*pte), 1);
return 0;
}
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index b34bdb25490..10b6be3ca28 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -355,7 +355,7 @@ SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special,
* resolution (think about autofs) and thus deadlocks could arise.
*/
if (cmds == Q_QUOTAON) {
- ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path);
+ ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
if (ret)
pathp = ERR_PTR(ret);
else
diff --git a/fs/stat.c b/fs/stat.c
index ba5316ffac6..78a3aa83c7e 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -81,8 +81,6 @@ int vfs_fstatat(int dfd, const char __user *filename, struct kstat *stat,
if (!(flag & AT_SYMLINK_NOFOLLOW))
lookup_flags |= LOOKUP_FOLLOW;
- if (flag & AT_NO_AUTOMOUNT)
- lookup_flags |= LOOKUP_NO_AUTOMOUNT;
if (flag & AT_EMPTY_PATH)
lookup_flags |= LOOKUP_EMPTY;
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 63e971e2b83..8c37dde4c52 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -1300,6 +1300,7 @@ xfs_end_io_direct_write(
bool is_async)
{
struct xfs_ioend *ioend = iocb->private;
+ struct inode *inode = ioend->io_inode;
/*
* blockdev_direct_IO can return an error even after the I/O
@@ -1331,7 +1332,7 @@ xfs_end_io_direct_write(
}
/* XXX: probably should move into the real I/O completion handler */
- inode_dio_done(ioend->io_inode);
+ inode_dio_done(inode);
}
STATIC ssize_t
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
index 98999cf107c..feb91219674 100644
--- a/include/linux/basic_mmio_gpio.h
+++ b/include/linux/basic_mmio_gpio.h
@@ -63,15 +63,10 @@ static inline struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc)
return container_of(gc, struct bgpio_chip, gc);
}
-int __devexit bgpio_remove(struct bgpio_chip *bgc);
-int __devinit bgpio_init(struct bgpio_chip *bgc,
- struct device *dev,
- unsigned long sz,
- void __iomem *dat,
- void __iomem *set,
- void __iomem *clr,
- void __iomem *dirout,
- void __iomem *dirin,
- bool big_endian);
+int bgpio_remove(struct bgpio_chip *bgc);
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+ unsigned long sz, void __iomem *dat, void __iomem *set,
+ void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+ bool big_endian);
#endif /* __BASIC_MMIO_GPIO_H */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 32f0076e844..71fc53bb8f1 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -124,6 +124,7 @@ enum rq_flag_bits {
__REQ_SYNC, /* request is sync (sync write or read) */
__REQ_META, /* metadata io request */
+ __REQ_PRIO, /* boost priority in cfq */
__REQ_DISCARD, /* request to discard sectors */
__REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */
@@ -161,14 +162,15 @@ enum rq_flag_bits {
#define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER)
#define REQ_SYNC (1 << __REQ_SYNC)
#define REQ_META (1 << __REQ_META)
+#define REQ_PRIO (1 << __REQ_PRIO)
#define REQ_DISCARD (1 << __REQ_DISCARD)
#define REQ_NOIDLE (1 << __REQ_NOIDLE)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
#define REQ_COMMON_MASK \
- (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
- REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
+ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \
+ REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
#define REQ_CLONE_MASK REQ_COMMON_MASK
#define REQ_RAHEAD (1 << __REQ_RAHEAD)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 84b15d54f8c..7fbaa910334 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -873,7 +873,6 @@ struct blk_plug {
struct list_head list;
struct list_head cb_list;
unsigned int should_sort;
- unsigned int count;
};
#define BLK_MAX_REQUEST_COUNT 16
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c2bd68f2277..277f497923a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -162,10 +162,8 @@ struct inodes_stat_t {
#define READA RWA_MASK
#define READ_SYNC (READ | REQ_SYNC)
-#define READ_META (READ | REQ_META)
#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
#define WRITE_ODIRECT (WRITE | REQ_SYNC)
-#define WRITE_META (WRITE | REQ_META)
#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index e807ad687a0..3ad553e8eae 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -80,6 +80,7 @@ extern void irq_domain_del(struct irq_domain *domain);
#endif /* CONFIG_IRQ_DOMAIN */
#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
+extern struct irq_domain_ops irq_domain_simple_ops;
extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
extern void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 2c366b52f50..aace6b8691a 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -553,6 +553,7 @@ struct kvm_ppc_pvinfo {
#define KVM_CAP_SPAPR_TCE 63
#define KVM_CAP_PPC_SMT 64
#define KVM_CAP_PPC_RMA 65
+#define KVM_CAP_S390_GMAP 71
#ifdef KVM_CAP_IRQ_ROUTING
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 3b535db00a9..343bd7661f2 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -39,16 +39,6 @@ extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct mem_cgroup *mem_cont,
int active, int file);
-struct memcg_scanrecord {
- struct mem_cgroup *mem; /* scanend memory cgroup */
- struct mem_cgroup *root; /* scan target hierarchy root */
- int context; /* scanning context (see memcontrol.c) */
- unsigned long nr_scanned[2]; /* the number of scanned pages */
- unsigned long nr_rotated[2]; /* the number of rotated pages */
- unsigned long nr_freed[2]; /* the number of freed pages */
- unsigned long elapsed; /* nsec of time elapsed while scanning */
-};
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
/*
* All "charge" functions with gfp_mask should use GFP_KERNEL or
@@ -127,15 +117,6 @@ mem_cgroup_get_reclaim_stat_from_page(struct page *page);
extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
struct task_struct *p);
-extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct memcg_scanrecord *rec);
-extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct zone *zone,
- struct memcg_scanrecord *rec,
- unsigned long *nr_scanned);
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
extern int do_swap_account;
#endif
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index d12f8d635a8..97cf4f27d64 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -26,7 +26,7 @@ struct wm8994_ldo_pdata {
struct regulator_init_data *init_data;
};
-#define WM8994_CONFIGURE_GPIO 0x8000
+#define WM8994_CONFIGURE_GPIO 0x10000
#define WM8994_DRC_REGS 5
#define WM8994_EQ_REGS 20
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 76fe2c62ae7..409328d1cbb 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -48,11 +48,12 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
*/
#define LOOKUP_FOLLOW 0x0001
#define LOOKUP_DIRECTORY 0x0002
+#define LOOKUP_AUTOMOUNT 0x0004
#define LOOKUP_PARENT 0x0010
#define LOOKUP_REVAL 0x0020
#define LOOKUP_RCU 0x0040
-#define LOOKUP_NO_AUTOMOUNT 0x0080
+
/*
* Intent data
*/
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8c230cbcbb4..9fc01226055 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -621,8 +621,9 @@ struct pci_driver {
extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
enum pcie_bus_config_types {
- PCIE_BUS_PERFORMANCE,
+ PCIE_BUS_TUNE_OFF,
PCIE_BUS_SAFE,
+ PCIE_BUS_PERFORMANCE,
PCIE_BUS_PEER2PEER,
};
diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h
index e07e2742a86..1dc420ba213 100644
--- a/include/linux/ptp_classify.h
+++ b/include/linux/ptp_classify.h
@@ -51,6 +51,7 @@
#define PTP_CLASS_V2_VLAN (PTP_CLASS_V2 | PTP_CLASS_VLAN)
#define PTP_EV_PORT 319
+#define PTP_GEN_BIT 0x08 /* indicates general message, if set in message type */
#define OFF_ETYPE 12
#define OFF_IHL 14
@@ -116,14 +117,20 @@ static inline int ptp_filter_init(struct sock_filter *f, int len)
{OP_OR, 0, 0, PTP_CLASS_IPV6 }, /* */ \
{OP_RETA, 0, 0, 0 }, /* */ \
/*L3x*/ {OP_RETK, 0, 0, PTP_CLASS_NONE }, /* */ \
-/*L40*/ {OP_JEQ, 0, 6, ETH_P_8021Q }, /* f goto L50 */ \
+/*L40*/ {OP_JEQ, 0, 9, ETH_P_8021Q }, /* f goto L50 */ \
{OP_LDH, 0, 0, OFF_ETYPE + 4 }, /* */ \
- {OP_JEQ, 0, 9, ETH_P_1588 }, /* f goto L60 */ \
+ {OP_JEQ, 0, 15, ETH_P_1588 }, /* f goto L60 */ \
+ {OP_LDB, 0, 0, ETH_HLEN + VLAN_HLEN }, /* */ \
+ {OP_AND, 0, 0, PTP_GEN_BIT }, /* */ \
+ {OP_JEQ, 0, 12, 0 }, /* f goto L6x */ \
{OP_LDH, 0, 0, ETH_HLEN + VLAN_HLEN }, /* */ \
{OP_AND, 0, 0, PTP_CLASS_VMASK }, /* */ \
{OP_OR, 0, 0, PTP_CLASS_VLAN }, /* */ \
{OP_RETA, 0, 0, 0 }, /* */ \
-/*L50*/ {OP_JEQ, 0, 4, ETH_P_1588 }, /* f goto L61 */ \
+/*L50*/ {OP_JEQ, 0, 7, ETH_P_1588 }, /* f goto L61 */ \
+ {OP_LDB, 0, 0, ETH_HLEN }, /* */ \
+ {OP_AND, 0, 0, PTP_GEN_BIT }, /* */ \
+ {OP_JEQ, 0, 4, 0 }, /* f goto L6x */ \
{OP_LDH, 0, 0, ETH_HLEN }, /* */ \
{OP_AND, 0, 0, PTP_CLASS_VMASK }, /* */ \
{OP_OR, 0, 0, PTP_CLASS_L2 }, /* */ \
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4ac2c0578e0..41d0237fd44 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1956,7 +1956,6 @@ static inline void disable_sched_clock_irqtime(void) {}
extern unsigned long long
task_sched_runtime(struct task_struct *task);
-extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
/* sched_exec is called by processes performing an exec */
#ifdef CONFIG_SMP
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7b996ed86d5..8bd383caa36 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -524,6 +524,7 @@ static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
+extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask);
extern struct sk_buff *skb_clone(struct sk_buff *skb,
gfp_t priority);
extern struct sk_buff *skb_copy(const struct sk_buff *skb,
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 12b2b18e50c..e16557a357e 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -231,6 +231,8 @@ enum
LINUX_MIB_TCPDEFERACCEPTDROP,
LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
+ LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */
+ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */
__LINUX_MIB_MAX
};
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 14d62490922..c71f84bb62e 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -252,6 +252,12 @@ static inline void lru_cache_add_file(struct page *page)
extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *mask);
extern int __isolate_lru_page(struct page *page, int mode, int file);
+extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ struct zone *zone,
+ unsigned long *nr_scanned);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
extern int remove_mapping(struct address_space *mapping, struct page *page);
diff --git a/include/net/flow.h b/include/net/flow.h
index 78113daadd6..a09447749e2 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -7,6 +7,7 @@
#ifndef _NET_FLOW_H
#define _NET_FLOW_H
+#include <linux/socket.h>
#include <linux/in6.h>
#include <linux/atomic.h>
@@ -68,7 +69,7 @@ struct flowi4 {
#define fl4_ipsec_spi uli.spi
#define fl4_mh_type uli.mht.type
#define fl4_gre_key uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
__u32 mark, __u8 tos, __u8 scope,
@@ -112,7 +113,7 @@ struct flowi6 {
#define fl6_ipsec_spi uli.spi
#define fl6_mh_type uli.mht.type
#define fl6_gre_key uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
struct flowidn {
struct flowi_common __fl_common;
@@ -127,7 +128,7 @@ struct flowidn {
union flowi_uli uli;
#define fld_sport uli.ports.sport
#define fld_dport uli.ports.dport
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
struct flowi {
union {
@@ -161,6 +162,24 @@ static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn)
return container_of(fldn, struct flowi, u.dn);
}
+typedef unsigned long flow_compare_t;
+
+static inline size_t flow_key_size(u16 family)
+{
+ switch (family) {
+ case AF_INET:
+ BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t));
+ return sizeof(struct flowi4) / sizeof(flow_compare_t);
+ case AF_INET6:
+ BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t));
+ return sizeof(struct flowi6) / sizeof(flow_compare_t);
+ case AF_DECnet:
+ BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t));
+ return sizeof(struct flowidn) / sizeof(flow_compare_t);
+ }
+ return 0;
+}
+
#define FLOW_DIR_IN 0
#define FLOW_DIR_OUT 1
#define FLOW_DIR_FWD 2
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 99e6e19b57c..4c0766e201e 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -96,7 +96,8 @@ extern int sysctl_max_syn_backlog;
*/
struct listen_sock {
u8 max_qlen_log;
- /* 3 bytes hole, try to use */
+ u8 synflood_warned;
+ /* 2 bytes hole, try to use */
int qlen;
int qlen_young;
int clock_hand;
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 6506458ccd3..712b3bebeda 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -109,6 +109,7 @@ typedef enum {
SCTP_CMD_SEND_MSG, /* Send the whole use message */
SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */
SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/
+ SCTP_CMD_SET_ASOC, /* Restore association context */
SCTP_CMD_LAST
} sctp_verb_t;
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 149a415d1e0..acc620a4a45 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -431,17 +431,34 @@ extern int tcp_disconnect(struct sock *sk, int flags);
extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
struct ip_options *opt);
+#ifdef CONFIG_SYN_COOKIES
extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb,
__u16 *mss);
+#else
+static inline __u32 cookie_v4_init_sequence(struct sock *sk,
+ struct sk_buff *skb,
+ __u16 *mss)
+{
+ return 0;
+}
+#endif
extern __u32 cookie_init_timestamp(struct request_sock *req);
extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *);
/* From net/ipv6/syncookies.c */
extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb);
+#ifdef CONFIG_SYN_COOKIES
extern __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb,
__u16 *mss);
-
+#else
+static inline __u32 cookie_v6_init_sequence(struct sock *sk,
+ struct sk_buff *skb,
+ __u16 *mss)
+{
+ return 0;
+}
+#endif
/* tcp_output.c */
extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
@@ -460,6 +477,9 @@ extern int tcp_write_wakeup(struct sock *);
extern void tcp_send_fin(struct sock *sk);
extern void tcp_send_active_reset(struct sock *sk, gfp_t priority);
extern int tcp_send_synack(struct sock *);
+extern int tcp_syn_flood_action(struct sock *sk,
+ const struct sk_buff *skb,
+ const char *proto);
extern void tcp_push_one(struct sock *, unsigned int mss_now);
extern void tcp_send_ack(struct sock *sk);
extern void tcp_send_delayed_ack(struct sock *sk);
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 5271a741c3a..498433dd067 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -39,6 +39,7 @@ extern int datagram_recv_ctl(struct sock *sk,
struct sk_buff *skb);
extern int datagram_send_ctl(struct net *net,
+ struct sock *sk,
struct msghdr *msg,
struct flowi6 *fl6,
struct ipv6_txoptions *opt,
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 6bca4cc0063..5f172703eb4 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -298,7 +298,7 @@ DECLARE_EVENT_CLASS(writeback_single_inode_template,
__array(char, name, 32)
__field(unsigned long, ino)
__field(unsigned long, state)
- __field(unsigned long, age)
+ __field(unsigned long, dirtied_when)
__field(unsigned long, writeback_index)
__field(long, nr_to_write)
__field(unsigned long, wrote)
@@ -309,19 +309,19 @@ DECLARE_EVENT_CLASS(writeback_single_inode_template,
dev_name(inode->i_mapping->backing_dev_info->dev), 32);
__entry->ino = inode->i_ino;
__entry->state = inode->i_state;
- __entry->age = (jiffies - inode->dirtied_when) *
- 1000 / HZ;
+ __entry->dirtied_when = inode->dirtied_when;
__entry->writeback_index = inode->i_mapping->writeback_index;
__entry->nr_to_write = nr_to_write;
__entry->wrote = nr_to_write - wbc->nr_to_write;
),
- TP_printk("bdi %s: ino=%lu state=%s age=%lu "
+ TP_printk("bdi %s: ino=%lu state=%s dirtied_when=%lu age=%lu "
"index=%lu to_write=%ld wrote=%lu",
__entry->name,
__entry->ino,
show_inode_state(__entry->state),
- __entry->age,
+ __entry->dirtied_when,
+ (jiffies - __entry->dirtied_when) / HZ,
__entry->writeback_index,
__entry->nr_to_write,
__entry->wrote
diff --git a/init/main.c b/init/main.c
index 9c51ee7adf3..03b408dff82 100644
--- a/init/main.c
+++ b/init/main.c
@@ -209,8 +209,19 @@ early_param("quiet", quiet_kernel);
static int __init loglevel(char *str)
{
- get_option(&str, &console_loglevel);
- return 0;
+ int newlevel;
+
+ /*
+ * Only update loglevel value when a correct setting was passed,
+ * to prevent blind crashes (when loglevel being set to 0) that
+ * are quite hard to debug
+ */
+ if (get_option(&str, &newlevel)) {
+ console_loglevel = newlevel;
+ return 0;
+ }
+
+ return -EINVAL;
}
early_param("loglevel", loglevel);
@@ -370,9 +381,6 @@ static noinline void __init_refok rest_init(void)
preempt_enable_no_resched();
schedule();
- /* At this point, we can enable user mode helper functionality */
- usermodehelper_enable();
-
/* Call into cpu_idle with preempt disabled */
preempt_disable();
cpu_idle();
@@ -722,6 +730,7 @@ static void __init do_basic_setup(void)
driver_init();
init_irq_proc();
do_ctors();
+ usermodehelper_enable();
do_initcalls();
}
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index d5828da3fd3..b57a3776de4 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -29,7 +29,11 @@ void irq_domain_add(struct irq_domain *domain)
*/
for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
- if (d || d->domain) {
+ if (!d) {
+ WARN(1, "error: assigning domain to non existant irq_desc");
+ return;
+ }
+ if (d->domain) {
/* things are broken; just report, don't clean up */
WARN(1, "error: irq_desc already assigned to a domain");
return;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 58f405b581e..c8008dd58ef 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -250,7 +250,7 @@ void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
do {
times->utime = cputime_add(times->utime, t->utime);
times->stime = cputime_add(times->stime, t->stime);
- times->sum_exec_runtime += t->se.sum_exec_runtime;
+ times->sum_exec_runtime += task_sched_runtime(t);
} while_each_thread(tsk, t);
out:
rcu_read_unlock();
@@ -312,7 +312,8 @@ static int cpu_clock_sample_group(const clockid_t which_clock,
cpu->cpu = cputime.utime;
break;
case CPUCLOCK_SCHED:
- cpu->sched = thread_group_sched_runtime(p);
+ thread_group_cputime(p, &cputime);
+ cpu->sched = cputime.sum_exec_runtime;
break;
}
return 0;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 9de3ecfd20f..a70d2a5d8c7 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -744,20 +744,17 @@ int ptrace_request(struct task_struct *child, long request,
break;
si = child->last_siginfo;
- if (unlikely(!si || si->si_code >> 8 != PTRACE_EVENT_STOP))
- break;
-
- child->jobctl |= JOBCTL_LISTENING;
-
- /*
- * If NOTIFY is set, it means event happened between start
- * of this trap and now. Trigger re-trap immediately.
- */
- if (child->jobctl & JOBCTL_TRAP_NOTIFY)
- signal_wake_up(child, true);
-
+ if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) {
+ child->jobctl |= JOBCTL_LISTENING;
+ /*
+ * If NOTIFY is set, it means event happened between
+ * start of this trap and now. Trigger re-trap.
+ */
+ if (child->jobctl & JOBCTL_TRAP_NOTIFY)
+ signal_wake_up(child, true);
+ ret = 0;
+ }
unlock_task_sighand(child, &flags);
- ret = 0;
break;
case PTRACE_DETACH: /* detach a process that was attached. */
diff --git a/kernel/resource.c b/kernel/resource.c
index 3b3cedc5259..c8dc249da5c 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -419,6 +419,9 @@ static int __find_resource(struct resource *root, struct resource *old,
else
tmp.end = root->end;
+ if (tmp.end < tmp.start)
+ goto next;
+
resource_clip(&tmp, constraint->min, constraint->max);
arch_remove_reservations(&tmp);
@@ -436,8 +439,10 @@ static int __find_resource(struct resource *root, struct resource *old,
return 0;
}
}
- if (!this)
+
+next: if (!this || this->end == root->end)
break;
+
if (this != old)
tmp.start = this->end + 1;
this = this->sibling;
diff --git a/kernel/sched.c b/kernel/sched.c
index ec5f472bc5b..b50b0f0c9aa 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3725,30 +3725,6 @@ unsigned long long task_sched_runtime(struct task_struct *p)
}
/*
- * Return sum_exec_runtime for the thread group.
- * In case the task is currently running, return the sum plus current's
- * pending runtime that have not been accounted yet.
- *
- * Note that the thread group might have other running tasks as well,
- * so the return value not includes other pending runtime that other
- * running tasks might have.
- */
-unsigned long long thread_group_sched_runtime(struct task_struct *p)
-{
- struct task_cputime totals;
- unsigned long flags;
- struct rq *rq;
- u64 ns;
-
- rq = task_rq_lock(p, &flags);
- thread_group_cputime(p, &totals);
- ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
- task_rq_unlock(rq, p, &flags);
-
- return ns;
-}
-
-/*
* Account user cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @cputime: the cpu time spent in user space since the last update
@@ -4372,7 +4348,7 @@ static inline void sched_submit_work(struct task_struct *tsk)
blk_schedule_flush_plug(tsk);
}
-asmlinkage void schedule(void)
+asmlinkage void __sched schedule(void)
{
struct task_struct *tsk = current;
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 97540f0c9e4..af1177858be 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1050,7 +1050,7 @@ select_task_rq_rt(struct task_struct *p, int sd_flag, int flags)
*/
if (curr && unlikely(rt_task(curr)) &&
(curr->rt.nr_cpus_allowed < 2 ||
- curr->prio < p->prio) &&
+ curr->prio <= p->prio) &&
(p->rt.nr_cpus_allowed > 1)) {
int target = find_lowest_rq(p);
@@ -1581,7 +1581,7 @@ static void task_woken_rt(struct rq *rq, struct task_struct *p)
p->rt.nr_cpus_allowed > 1 &&
rt_task(rq->curr) &&
(rq->curr->rt.nr_cpus_allowed < 2 ||
- rq->curr->prio < p->prio))
+ rq->curr->prio <= p->prio))
push_rt_tasks(rq);
}
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index e19ce1454ee..e66046456f4 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -655,6 +655,7 @@ static struct genl_ops taskstats_ops = {
.cmd = TASKSTATS_CMD_GET,
.doit = taskstats_user_cmd,
.policy = taskstats_cmd_get_policy,
+ .flags = GENL_ADMIN_PERM,
};
static struct genl_ops cgroupstats_ops = {
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 24dc60d9fa1..5bbfac85866 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -78,6 +78,7 @@ void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk)
#define KB 1024
#define MB (1024*KB)
+#define KB_MASK (~(KB-1))
/*
* fill in extended accounting fields
*/
@@ -95,14 +96,14 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
stats->hiwater_vm = get_mm_hiwater_vm(mm) * PAGE_SIZE / KB;
mmput(mm);
}
- stats->read_char = p->ioac.rchar;
- stats->write_char = p->ioac.wchar;
- stats->read_syscalls = p->ioac.syscr;
- stats->write_syscalls = p->ioac.syscw;
+ stats->read_char = p->ioac.rchar & KB_MASK;
+ stats->write_char = p->ioac.wchar & KB_MASK;
+ stats->read_syscalls = p->ioac.syscr & KB_MASK;
+ stats->write_syscalls = p->ioac.syscw & KB_MASK;
#ifdef CONFIG_TASK_IO_ACCOUNTING
- stats->read_bytes = p->ioac.read_bytes;
- stats->write_bytes = p->ioac.write_bytes;
- stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
+ stats->read_bytes = p->ioac.read_bytes & KB_MASK;
+ stats->write_bytes = p->ioac.write_bytes & KB_MASK;
+ stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes & KB_MASK;
#else
stats->read_bytes = 0;
stats->write_bytes = 0;
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 25fb1b0e53f..1783aabc612 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2412,8 +2412,13 @@ reflush:
for_each_cwq_cpu(cpu, wq) {
struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+ bool drained;
- if (!cwq->nr_active && list_empty(&cwq->delayed_works))
+ spin_lock_irq(&cwq->gcwq->lock);
+ drained = !cwq->nr_active && list_empty(&cwq->delayed_works);
+ spin_unlock_irq(&cwq->gcwq->lock);
+
+ if (drained)
continue;
if (++flush_cnt == 10 ||
diff --git a/lib/sha1.c b/lib/sha1.c
index f33271dd00c..1de509a159c 100644
--- a/lib/sha1.c
+++ b/lib/sha1.c
@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/cryptohash.h>
#include <asm/unaligned.h>
/*
diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c
index e51e2558ca9..a768e6d28bb 100644
--- a/lib/xz/xz_dec_bcj.c
+++ b/lib/xz/xz_dec_bcj.c
@@ -441,8 +441,12 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s,
* next filter in the chain. Apply the BCJ filter on the new data
* in the output buffer. If everything cannot be filtered, copy it
* to temp and rewind the output buffer position accordingly.
+ *
+ * This needs to be always run when temp.size == 0 to handle a special
+ * case where the output buffer is full and the next filter has no
+ * more output coming but hasn't returned XZ_STREAM_END yet.
*/
- if (s->temp.size < b->out_size - b->out_pos) {
+ if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) {
out_start = b->out_pos;
memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size);
b->out_pos += s->temp.size;
@@ -465,16 +469,25 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s,
s->temp.size = b->out_pos - out_start;
b->out_pos -= s->temp.size;
memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size);
+
+ /*
+ * If there wasn't enough input to the next filter to fill
+ * the output buffer with unfiltered data, there's no point
+ * to try decoding more data to temp.
+ */
+ if (b->out_pos + s->temp.size < b->out_size)
+ return XZ_OK;
}
/*
- * If we have unfiltered data in temp, try to fill by decoding more
- * data from the next filter. Apply the BCJ filter on temp. Then we
- * hopefully can fill the actual output buffer by copying filtered
- * data from temp. A mix of filtered and unfiltered data may be left
- * in temp; it will be taken care on the next call to this function.
+ * We have unfiltered data in temp. If the output buffer isn't full
+ * yet, try to fill the temp buffer by decoding more data from the
+ * next filter. Apply the BCJ filter on temp. Then we hopefully can
+ * fill the actual output buffer by copying filtered data from temp.
+ * A mix of filtered and unfiltered data may be left in temp; it will
+ * be taken care on the next call to this function.
*/
- if (s->temp.size > 0) {
+ if (b->out_pos < b->out_size) {
/* Make b->out{,_pos,_size} temporarily point to s->temp. */
s->out = b->out;
s->out_pos = b->out_pos;
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index d6edf8d14f9..a87da524a4a 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -359,6 +359,17 @@ static unsigned long bdi_longest_inactive(void)
return max(5UL * 60 * HZ, interval);
}
+/*
+ * Clear pending bit and wakeup anybody waiting for flusher thread creation or
+ * shutdown
+ */
+static void bdi_clear_pending(struct backing_dev_info *bdi)
+{
+ clear_bit(BDI_pending, &bdi->state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&bdi->state, BDI_pending);
+}
+
static int bdi_forker_thread(void *ptr)
{
struct bdi_writeback *me = ptr;
@@ -390,6 +401,13 @@ static int bdi_forker_thread(void *ptr)
}
spin_lock_bh(&bdi_lock);
+ /*
+ * In the following loop we are going to check whether we have
+ * some work to do without any synchronization with tasks
+ * waking us up to do work for them. So we have to set task
+ * state already here so that we don't miss wakeups coming
+ * after we verify some condition.
+ */
set_current_state(TASK_INTERRUPTIBLE);
list_for_each_entry(bdi, &bdi_list, bdi_list) {
@@ -469,11 +487,13 @@ static int bdi_forker_thread(void *ptr)
spin_unlock_bh(&bdi->wb_lock);
wake_up_process(task);
}
+ bdi_clear_pending(bdi);
break;
case KILL_THREAD:
__set_current_state(TASK_RUNNING);
kthread_stop(task);
+ bdi_clear_pending(bdi);
break;
case NO_ACTION:
@@ -489,16 +509,8 @@ static int bdi_forker_thread(void *ptr)
else
schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
try_to_freeze();
- /* Back to the main loop */
- continue;
+ break;
}
-
- /*
- * Clear pending bit and wakeup anybody waiting to tear us down.
- */
- clear_bit(BDI_pending, &bdi->state);
- smp_mb__after_clear_bit();
- wake_up_bit(&bdi->state, BDI_pending);
}
return 0;
diff --git a/mm/filemap.c b/mm/filemap.c
index 645a080ba4d..7771871fa35 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -827,13 +827,14 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
{
unsigned int i;
unsigned int ret;
- unsigned int nr_found;
+ unsigned int nr_found, nr_skip;
rcu_read_lock();
restart:
nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
(void ***)pages, NULL, start, nr_pages);
ret = 0;
+ nr_skip = 0;
for (i = 0; i < nr_found; i++) {
struct page *page;
repeat:
@@ -856,6 +857,7 @@ repeat:
* here as an exceptional entry: so skip over it -
* we only reach this from invalidate_mapping_pages().
*/
+ nr_skip++;
continue;
}
@@ -876,7 +878,7 @@ repeat:
* If all entries were removed before we could secure them,
* try again, because callers stop trying once 0 is returned.
*/
- if (unlikely(!ret && nr_found))
+ if (unlikely(!ret && nr_found > nr_skip))
goto restart;
rcu_read_unlock();
return ret;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ebd1e86bef1..3508777837c 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -204,50 +204,6 @@ struct mem_cgroup_eventfd_list {
static void mem_cgroup_threshold(struct mem_cgroup *mem);
static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
-enum {
- SCAN_BY_LIMIT,
- SCAN_BY_SYSTEM,
- NR_SCAN_CONTEXT,
- SCAN_BY_SHRINK, /* not recorded now */
-};
-
-enum {
- SCAN,
- SCAN_ANON,
- SCAN_FILE,
- ROTATE,
- ROTATE_ANON,
- ROTATE_FILE,
- FREED,
- FREED_ANON,
- FREED_FILE,
- ELAPSED,
- NR_SCANSTATS,
-};
-
-struct scanstat {
- spinlock_t lock;
- unsigned long stats[NR_SCAN_CONTEXT][NR_SCANSTATS];
- unsigned long rootstats[NR_SCAN_CONTEXT][NR_SCANSTATS];
-};
-
-const char *scanstat_string[NR_SCANSTATS] = {
- "scanned_pages",
- "scanned_anon_pages",
- "scanned_file_pages",
- "rotated_pages",
- "rotated_anon_pages",
- "rotated_file_pages",
- "freed_pages",
- "freed_anon_pages",
- "freed_file_pages",
- "elapsed_ns",
-};
-#define SCANSTAT_WORD_LIMIT "_by_limit"
-#define SCANSTAT_WORD_SYSTEM "_by_system"
-#define SCANSTAT_WORD_HIERARCHY "_under_hierarchy"
-
-
/*
* The memory controller data structure. The memory controller controls both
* page cache and RSS per cgroup. We would eventually like to provide
@@ -313,8 +269,7 @@ struct mem_cgroup {
/* For oom notifier event fd */
struct list_head oom_notify;
- /* For recording LRU-scan statistics */
- struct scanstat scanstat;
+
/*
* Should we move charges of a task when a task is moved into this
* mem_cgroup ? And what type of charges should we move ?
@@ -1678,44 +1633,6 @@ bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
}
#endif
-static void __mem_cgroup_record_scanstat(unsigned long *stats,
- struct memcg_scanrecord *rec)
-{
-
- stats[SCAN] += rec->nr_scanned[0] + rec->nr_scanned[1];
- stats[SCAN_ANON] += rec->nr_scanned[0];
- stats[SCAN_FILE] += rec->nr_scanned[1];
-
- stats[ROTATE] += rec->nr_rotated[0] + rec->nr_rotated[1];
- stats[ROTATE_ANON] += rec->nr_rotated[0];
- stats[ROTATE_FILE] += rec->nr_rotated[1];
-
- stats[FREED] += rec->nr_freed[0] + rec->nr_freed[1];
- stats[FREED_ANON] += rec->nr_freed[0];
- stats[FREED_FILE] += rec->nr_freed[1];
-
- stats[ELAPSED] += rec->elapsed;
-}
-
-static void mem_cgroup_record_scanstat(struct memcg_scanrecord *rec)
-{
- struct mem_cgroup *mem;
- int context = rec->context;
-
- if (context >= NR_SCAN_CONTEXT)
- return;
-
- mem = rec->mem;
- spin_lock(&mem->scanstat.lock);
- __mem_cgroup_record_scanstat(mem->scanstat.stats[context], rec);
- spin_unlock(&mem->scanstat.lock);
-
- mem = rec->root;
- spin_lock(&mem->scanstat.lock);
- __mem_cgroup_record_scanstat(mem->scanstat.rootstats[context], rec);
- spin_unlock(&mem->scanstat.lock);
-}
-
/*
* Scan the hierarchy if needed to reclaim memory. We remember the last child
* we reclaimed from, so that we don't end up penalizing one child extensively
@@ -1740,9 +1657,8 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP;
bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK;
bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT;
- struct memcg_scanrecord rec;
unsigned long excess;
- unsigned long scanned;
+ unsigned long nr_scanned;
excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
@@ -1750,15 +1666,6 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
if (!check_soft && !shrink && root_mem->memsw_is_minimum)
noswap = true;
- if (shrink)
- rec.context = SCAN_BY_SHRINK;
- else if (check_soft)
- rec.context = SCAN_BY_SYSTEM;
- else
- rec.context = SCAN_BY_LIMIT;
-
- rec.root = root_mem;
-
while (1) {
victim = mem_cgroup_select_victim(root_mem);
if (victim == root_mem) {
@@ -1799,23 +1706,14 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
css_put(&victim->css);
continue;
}
- rec.mem = victim;
- rec.nr_scanned[0] = 0;
- rec.nr_scanned[1] = 0;
- rec.nr_rotated[0] = 0;
- rec.nr_rotated[1] = 0;
- rec.nr_freed[0] = 0;
- rec.nr_freed[1] = 0;
- rec.elapsed = 0;
/* we use swappiness of local cgroup */
if (check_soft) {
ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
- noswap, zone, &rec, &scanned);
- *total_scanned += scanned;
+ noswap, zone, &nr_scanned);
+ *total_scanned += nr_scanned;
} else
ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
- noswap, &rec);
- mem_cgroup_record_scanstat(&rec);
+ noswap);
css_put(&victim->css);
/*
* At shrinking usage, we can't check we should stop here or
@@ -3854,18 +3752,14 @@ try_to_free:
/* try to free all pages in this cgroup */
shrink = 1;
while (nr_retries && mem->res.usage > 0) {
- struct memcg_scanrecord rec;
int progress;
if (signal_pending(current)) {
ret = -EINTR;
goto out;
}
- rec.context = SCAN_BY_SHRINK;
- rec.mem = mem;
- rec.root = mem;
progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL,
- false, &rec);
+ false);
if (!progress) {
nr_retries--;
/* maybe some writeback is necessary */
@@ -4709,54 +4603,6 @@ static int mem_control_numa_stat_open(struct inode *unused, struct file *file)
}
#endif /* CONFIG_NUMA */
-static int mem_cgroup_vmscan_stat_read(struct cgroup *cgrp,
- struct cftype *cft,
- struct cgroup_map_cb *cb)
-{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
- char string[64];
- int i;
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_LIMIT);
- cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_LIMIT][i]);
- }
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_SYSTEM);
- cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_SYSTEM][i]);
- }
-
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_LIMIT);
- strcat(string, SCANSTAT_WORD_HIERARCHY);
- cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_LIMIT][i]);
- }
- for (i = 0; i < NR_SCANSTATS; i++) {
- strcpy(string, scanstat_string[i]);
- strcat(string, SCANSTAT_WORD_SYSTEM);
- strcat(string, SCANSTAT_WORD_HIERARCHY);
- cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_SYSTEM][i]);
- }
- return 0;
-}
-
-static int mem_cgroup_reset_vmscan_stat(struct cgroup *cgrp,
- unsigned int event)
-{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
-
- spin_lock(&mem->scanstat.lock);
- memset(&mem->scanstat.stats, 0, sizeof(mem->scanstat.stats));
- memset(&mem->scanstat.rootstats, 0, sizeof(mem->scanstat.rootstats));
- spin_unlock(&mem->scanstat.lock);
- return 0;
-}
-
-
static struct cftype mem_cgroup_files[] = {
{
.name = "usage_in_bytes",
@@ -4827,11 +4673,6 @@ static struct cftype mem_cgroup_files[] = {
.mode = S_IRUGO,
},
#endif
- {
- .name = "vmscan_stat",
- .read_map = mem_cgroup_vmscan_stat_read,
- .trigger = mem_cgroup_reset_vmscan_stat,
- },
};
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -5095,7 +4936,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
atomic_set(&mem->refcnt, 1);
mem->move_charge_at_immigrate = 0;
mutex_init(&mem->thresholds_lock);
- spin_lock_init(&mem->scanstat.lock);
return &mem->css;
free_out:
__mem_cgroup_free(mem);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 8b57173c1dd..9c51f9f58ca 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -636,7 +636,6 @@ static int mbind_range(struct mm_struct *mm, unsigned long start,
struct vm_area_struct *prev;
struct vm_area_struct *vma;
int err = 0;
- pgoff_t pgoff;
unsigned long vmstart;
unsigned long vmend;
@@ -649,9 +648,9 @@ static int mbind_range(struct mm_struct *mm, unsigned long start,
vmstart = max(start, vma->vm_start);
vmend = min(end, vma->vm_end);
- pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags,
- vma->anon_vma, vma->vm_file, pgoff, new_pol);
+ vma->anon_vma, vma->vm_file, vma->vm_pgoff,
+ new_pol);
if (prev) {
vma = prev;
next = vma->vm_next;
@@ -1412,7 +1411,9 @@ asmlinkage long compat_sys_get_mempolicy(int __user *policy,
err = sys_get_mempolicy(policy, nm, nr_bits+1, addr, flags);
if (!err && nmask) {
- err = copy_from_user(bm, nm, alloc_size);
+ unsigned long copy_size;
+ copy_size = min_t(unsigned long, sizeof(bm), alloc_size);
+ err = copy_from_user(bm, nm, copy_size);
/* ensure entire bitmap is zeroed */
err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8);
err |= compat_put_bitmap(nmask, bm, nr_bits);
diff --git a/mm/slub.c b/mm/slub.c
index 9f662d70eb4..7c54fe83a90 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2377,7 +2377,7 @@ static void __slab_free(struct kmem_cache *s, struct page *page,
*/
if (unlikely(!prior)) {
remove_full(s, page);
- add_partial(n, page, 0);
+ add_partial(n, page, 1);
stat(s, FREE_ADD_PARTIAL);
}
}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 7ef0903058e..5016f19e166 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2140,6 +2140,14 @@ struct vm_struct *alloc_vm_area(size_t size)
return NULL;
}
+ /*
+ * If the allocated address space is passed to a hypercall
+ * before being used then we cannot rely on a page fault to
+ * trigger an update of the page tables. So sync all the page
+ * tables here.
+ */
+ vmalloc_sync_all();
+
return area;
}
EXPORT_SYMBOL_GPL(alloc_vm_area);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b7719ec10dc..b55699cd906 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -105,7 +105,6 @@ struct scan_control {
/* Which cgroup do we reclaim from */
struct mem_cgroup *mem_cgroup;
- struct memcg_scanrecord *memcg_record;
/*
* Nodemask of nodes allowed by the caller. If NULL, all nodes
@@ -1349,8 +1348,6 @@ putback_lru_pages(struct zone *zone, struct scan_control *sc,
int file = is_file_lru(lru);
int numpages = hpage_nr_pages(page);
reclaim_stat->recent_rotated[file] += numpages;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_rotated[file] += numpages;
}
if (!pagevec_add(&pvec, page)) {
spin_unlock_irq(&zone->lru_lock);
@@ -1394,10 +1391,6 @@ static noinline_for_stack void update_isolated_counts(struct zone *zone,
reclaim_stat->recent_scanned[0] += *nr_anon;
reclaim_stat->recent_scanned[1] += *nr_file;
- if (!scanning_global_lru(sc)) {
- sc->memcg_record->nr_scanned[0] += *nr_anon;
- sc->memcg_record->nr_scanned[1] += *nr_file;
- }
}
/*
@@ -1511,9 +1504,6 @@ shrink_inactive_list(unsigned long nr_to_scan, struct zone *zone,
nr_reclaimed += shrink_page_list(&page_list, zone, sc);
}
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_freed[file] += nr_reclaimed;
-
local_irq_disable();
if (current_is_kswapd())
__count_vm_events(KSWAPD_STEAL, nr_reclaimed);
@@ -1613,8 +1603,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
}
reclaim_stat->recent_scanned[file] += nr_taken;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_scanned[file] += nr_taken;
__count_zone_vm_events(PGREFILL, zone, pgscanned);
if (file)
@@ -1666,8 +1654,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
* get_scan_ratio.
*/
reclaim_stat->recent_rotated[file] += nr_rotated;
- if (!scanning_global_lru(sc))
- sc->memcg_record->nr_rotated[file] += nr_rotated;
move_active_pages_to_lru(zone, &l_active,
LRU_ACTIVE + file * LRU_FILE);
@@ -1808,23 +1794,15 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc,
u64 fraction[2], denominator;
enum lru_list l;
int noswap = 0;
- int force_scan = 0;
+ bool force_scan = false;
unsigned long nr_force_scan[2];
-
- anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
- file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
- zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
-
- if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) {
- /* kswapd does zone balancing and need to scan this zone */
- if (scanning_global_lru(sc) && current_is_kswapd())
- force_scan = 1;
- /* memcg may have small limit and need to avoid priority drop */
- if (!scanning_global_lru(sc))
- force_scan = 1;
- }
+ /* kswapd does zone balancing and needs to scan this zone */
+ if (scanning_global_lru(sc) && current_is_kswapd())
+ force_scan = true;
+ /* memcg may have small limit and need to avoid priority drop */
+ if (!scanning_global_lru(sc))
+ force_scan = true;
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || (nr_swap_pages <= 0)) {
@@ -1837,6 +1815,11 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc,
goto out;
}
+ anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
+ file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
+ zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
+
if (scanning_global_lru(sc)) {
free = zone_page_state(zone, NR_FREE_PAGES);
/* If we have very few page cache pages,
@@ -2268,10 +2251,9 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
- gfp_t gfp_mask, bool noswap,
- struct zone *zone,
- struct memcg_scanrecord *rec,
- unsigned long *scanned)
+ gfp_t gfp_mask, bool noswap,
+ struct zone *zone,
+ unsigned long *nr_scanned)
{
struct scan_control sc = {
.nr_scanned = 0,
@@ -2281,9 +2263,7 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
.may_swap = !noswap,
.order = 0,
.mem_cgroup = mem,
- .memcg_record = rec,
};
- ktime_t start, end;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
@@ -2292,7 +2272,6 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
sc.may_writepage,
sc.gfp_mask);
- start = ktime_get();
/*
* NOTE: Although we can get the priority field, using it
* here is not a good idea, since it limits the pages we can scan.
@@ -2301,25 +2280,19 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
* the priority and make it zero.
*/
shrink_zone(0, zone, &sc);
- end = ktime_get();
-
- if (rec)
- rec->elapsed += ktime_to_ns(ktime_sub(end, start));
- *scanned = sc.nr_scanned;
trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
+ *nr_scanned = sc.nr_scanned;
return sc.nr_reclaimed;
}
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask,
- bool noswap,
- struct memcg_scanrecord *rec)
+ bool noswap)
{
struct zonelist *zonelist;
unsigned long nr_reclaimed;
- ktime_t start, end;
int nid;
struct scan_control sc = {
.may_writepage = !laptop_mode,
@@ -2328,7 +2301,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
.nr_to_reclaim = SWAP_CLUSTER_MAX,
.order = 0,
.mem_cgroup = mem_cont,
- .memcg_record = rec,
.nodemask = NULL, /* we don't care the placement */
.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK),
@@ -2337,7 +2309,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
.gfp_mask = sc.gfp_mask,
};
- start = ktime_get();
/*
* Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't
* take care of from where we get pages. So the node where we start the
@@ -2352,9 +2323,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
sc.gfp_mask);
nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink);
- end = ktime_get();
- if (rec)
- rec->elapsed += ktime_to_ns(ktime_sub(end, start));
trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 20c18b7694b..d52b13d28e8 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -659,7 +659,7 @@ static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat,
}
#endif
-#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS)
+#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) || defined(CONFIG_NUMA)
#ifdef CONFIG_ZONE_DMA
#define TEXT_FOR_DMA(xx) xx "_dma",
#else
@@ -788,7 +788,7 @@ const char * const vmstat_text[] = {
#endif /* CONFIG_VM_EVENTS_COUNTERS */
};
-#endif /* CONFIG_PROC_FS || CONFIG_SYSFS */
+#endif /* CONFIG_PROC_FS || CONFIG_SYSFS || CONFIG_NUMA */
#ifdef CONFIG_PROC_FS
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 3e2f91ffa4e..05dd35114a2 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -565,7 +565,7 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
struct orig_node *orig_node = NULL;
int data_len = skb->len, ret;
short vid = -1;
- bool do_bcast = false;
+ bool do_bcast;
if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
goto dropped;
@@ -598,15 +598,15 @@ static int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
tt_local_add(soft_iface, ethhdr->h_source);
orig_node = transtable_search(bat_priv, ethhdr->h_dest);
- if (is_multicast_ether_addr(ethhdr->h_dest) ||
- (orig_node && orig_node->gw_flags)) {
+ do_bcast = is_multicast_ether_addr(ethhdr->h_dest);
+ if (do_bcast || (orig_node && orig_node->gw_flags)) {
ret = gw_is_target(bat_priv, skb, orig_node);
if (ret < 0)
goto dropped;
- if (ret == 0)
- do_bcast = true;
+ if (ret)
+ do_bcast = false;
}
/* ethernet packet should be broadcasted */
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index a40170e022e..7ef4eb4435f 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -58,8 +58,8 @@ static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
if (status)
return;
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status);
@@ -76,8 +76,8 @@ static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb)
if (status)
return;
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_conn_check_pending(hdev);
@@ -959,9 +959,8 @@ static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
return;
}
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- !test_and_set_bit(HCI_INQUIRY,
- &hdev->flags))
+ if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 1);
}
@@ -1340,8 +1339,8 @@ static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff
BT_DBG("%s status %d", hdev->name, status);
- if (test_bit(HCI_MGMT, &hdev->flags) &&
- test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+ if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+ test_bit(HCI_MGMT, &hdev->flags))
mgmt_discovering(hdev->id, 0);
hci_req_complete(hdev, HCI_OP_INQUIRY, status);
diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig
index ba6f73eb06c..a9aff9c7d02 100644
--- a/net/bridge/netfilter/Kconfig
+++ b/net/bridge/netfilter/Kconfig
@@ -4,7 +4,7 @@
menuconfig BRIDGE_NF_EBTABLES
tristate "Ethernet Bridge tables (ebtables) support"
- depends on BRIDGE && BRIDGE_NETFILTER
+ depends on BRIDGE && NETFILTER
select NETFILTER_XTABLES
help
ebtables is a general, extensible frame/packet identification
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 7c2fa0a0814..7f9ac0742d1 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -93,10 +93,14 @@ static struct caif_device_entry *caif_device_alloc(struct net_device *dev)
caifdevs = caif_device_list(dev_net(dev));
BUG_ON(!caifdevs);
- caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC);
+ caifd = kzalloc(sizeof(*caifd), GFP_KERNEL);
if (!caifd)
return NULL;
caifd->pcpu_refcnt = alloc_percpu(int);
+ if (!caifd->pcpu_refcnt) {
+ kfree(caifd);
+ return NULL;
+ }
caifd->netdev = dev;
dev_hold(dev);
return caifd;
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 8ce926d3b2c..9b0c32a2690 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -857,7 +857,7 @@ static __exit void can_exit(void)
struct net_device *dev;
if (stats_timer)
- del_timer(&can_stattimer);
+ del_timer_sync(&can_stattimer);
can_remove_proc();
diff --git a/net/can/bcm.c b/net/can/bcm.c
index d6c8ae5b2e6..c84963d2dee 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -344,6 +344,18 @@ static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head,
}
}
+static void bcm_tx_start_timer(struct bcm_op *op)
+{
+ if (op->kt_ival1.tv64 && op->count)
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival1),
+ HRTIMER_MODE_ABS);
+ else if (op->kt_ival2.tv64)
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival2),
+ HRTIMER_MODE_ABS);
+}
+
static void bcm_tx_timeout_tsklet(unsigned long data)
{
struct bcm_op *op = (struct bcm_op *)data;
@@ -365,26 +377,12 @@ static void bcm_tx_timeout_tsklet(unsigned long data)
bcm_send_to_user(op, &msg_head, NULL, 0);
}
- }
-
- if (op->kt_ival1.tv64 && (op->count > 0)) {
-
- /* send (next) frame */
bcm_can_tx(op);
- hrtimer_start(&op->timer,
- ktime_add(ktime_get(), op->kt_ival1),
- HRTIMER_MODE_ABS);
- } else {
- if (op->kt_ival2.tv64) {
+ } else if (op->kt_ival2.tv64)
+ bcm_can_tx(op);
- /* send (next) frame */
- bcm_can_tx(op);
- hrtimer_start(&op->timer,
- ktime_add(ktime_get(), op->kt_ival2),
- HRTIMER_MODE_ABS);
- }
- }
+ bcm_tx_start_timer(op);
}
/*
@@ -964,23 +962,20 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
hrtimer_cancel(&op->timer);
}
- if ((op->flags & STARTTIMER) &&
- ((op->kt_ival1.tv64 && op->count) || op->kt_ival2.tv64)) {
-
+ if (op->flags & STARTTIMER) {
+ hrtimer_cancel(&op->timer);
/* spec: send can_frame when starting timer */
op->flags |= TX_ANNOUNCE;
-
- if (op->kt_ival1.tv64 && (op->count > 0)) {
- /* op->count-- is done in bcm_tx_timeout_handler */
- hrtimer_start(&op->timer, op->kt_ival1,
- HRTIMER_MODE_REL);
- } else
- hrtimer_start(&op->timer, op->kt_ival2,
- HRTIMER_MODE_REL);
}
- if (op->flags & TX_ANNOUNCE)
+ if (op->flags & TX_ANNOUNCE) {
bcm_can_tx(op);
+ if (op->count)
+ op->count--;
+ }
+
+ if (op->flags & STARTTIMER)
+ bcm_tx_start_timer(op);
return msg_head->nframes * CFSIZ + MHSIZ;
}
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 132963abc26..2883ea01e68 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -232,6 +232,7 @@ void ceph_destroy_options(struct ceph_options *opt)
ceph_crypto_key_destroy(opt->key);
kfree(opt->key);
}
+ kfree(opt->mon_addr);
kfree(opt);
}
EXPORT_SYMBOL(ceph_destroy_options);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index c340e2e0765..9918e9eb276 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2307,6 +2307,7 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
m->front_max = front_len;
m->front_is_vmalloc = false;
m->more_to_follow = false;
+ m->ack_stamp = 0;
m->pool = NULL;
/* middle */
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 16836a7df7a..88ad8a2501b 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -217,6 +217,7 @@ struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
INIT_LIST_HEAD(&req->r_unsafe_item);
INIT_LIST_HEAD(&req->r_linger_item);
INIT_LIST_HEAD(&req->r_linger_osd);
+ INIT_LIST_HEAD(&req->r_req_lru_item);
req->r_flags = flags;
WARN_ON((flags & (CEPH_OSD_FLAG_READ|CEPH_OSD_FLAG_WRITE)) == 0);
@@ -816,13 +817,10 @@ static void __register_request(struct ceph_osd_client *osdc,
{
req->r_tid = ++osdc->last_tid;
req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
- INIT_LIST_HEAD(&req->r_req_lru_item);
-
dout("__register_request %p tid %lld\n", req, req->r_tid);
__insert_request(osdc, req);
ceph_osdc_get_request(req);
osdc->num_requests++;
-
if (osdc->num_requests == 1) {
dout(" first request, scheduling timeout\n");
__schedule_osd_timeout(osdc);
diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c
index e97c3588c3e..fd863fe7693 100644
--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -339,6 +339,7 @@ static int __insert_pg_mapping(struct ceph_pg_mapping *new,
struct ceph_pg_mapping *pg = NULL;
int c;
+ dout("__insert_pg_mapping %llx %p\n", *(u64 *)&new->pgid, new);
while (*p) {
parent = *p;
pg = rb_entry(parent, struct ceph_pg_mapping, node);
@@ -366,16 +367,33 @@ static struct ceph_pg_mapping *__lookup_pg_mapping(struct rb_root *root,
while (n) {
pg = rb_entry(n, struct ceph_pg_mapping, node);
c = pgid_cmp(pgid, pg->pgid);
- if (c < 0)
+ if (c < 0) {
n = n->rb_left;
- else if (c > 0)
+ } else if (c > 0) {
n = n->rb_right;
- else
+ } else {
+ dout("__lookup_pg_mapping %llx got %p\n",
+ *(u64 *)&pgid, pg);
return pg;
+ }
}
return NULL;
}
+static int __remove_pg_mapping(struct rb_root *root, struct ceph_pg pgid)
+{
+ struct ceph_pg_mapping *pg = __lookup_pg_mapping(root, pgid);
+
+ if (pg) {
+ dout("__remove_pg_mapping %llx %p\n", *(u64 *)&pgid, pg);
+ rb_erase(&pg->node, root);
+ kfree(pg);
+ return 0;
+ }
+ dout("__remove_pg_mapping %llx dne\n", *(u64 *)&pgid);
+ return -ENOENT;
+}
+
/*
* rbtree of pg pool info
*/
@@ -711,7 +729,6 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
void *start = *p;
int err = -EINVAL;
u16 version;
- struct rb_node *rbp;
ceph_decode_16_safe(p, end, version, bad);
if (version > CEPH_OSDMAP_INC_VERSION) {
@@ -861,7 +878,6 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
}
/* new_pg_temp */
- rbp = rb_first(&map->pg_temp);
ceph_decode_32_safe(p, end, len, bad);
while (len--) {
struct ceph_pg_mapping *pg;
@@ -872,18 +888,6 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
ceph_decode_copy(p, &pgid, sizeof(pgid));
pglen = ceph_decode_32(p);
- /* remove any? */
- while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
- node)->pgid, pgid) <= 0) {
- struct ceph_pg_mapping *cur =
- rb_entry(rbp, struct ceph_pg_mapping, node);
-
- rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
- rb_erase(&cur->node, &map->pg_temp);
- kfree(cur);
- }
-
if (pglen) {
/* insert */
ceph_decode_need(p, end, pglen*sizeof(u32), bad);
@@ -903,17 +907,11 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
}
dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
pglen);
+ } else {
+ /* remove */
+ __remove_pg_mapping(&map->pg_temp, pgid);
}
}
- while (rbp) {
- struct ceph_pg_mapping *cur =
- rb_entry(rbp, struct ceph_pg_mapping, node);
-
- rbp = rb_next(rbp);
- dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
- rb_erase(&cur->node, &map->pg_temp);
- kfree(cur);
- }
/* ignore the rest */
*p = end;
@@ -1046,10 +1044,25 @@ static int *calc_pg_raw(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
struct ceph_pg_mapping *pg;
struct ceph_pg_pool_info *pool;
int ruleno;
- unsigned poolid, ps, pps;
+ unsigned poolid, ps, pps, t;
int preferred;
+ poolid = le32_to_cpu(pgid.pool);
+ ps = le16_to_cpu(pgid.ps);
+ preferred = (s16)le16_to_cpu(pgid.preferred);
+
+ pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
+ if (!pool)
+ return NULL;
+
/* pg_temp? */
+ if (preferred >= 0)
+ t = ceph_stable_mod(ps, le32_to_cpu(pool->v.lpg_num),
+ pool->lpgp_num_mask);
+ else
+ t = ceph_stable_mod(ps, le32_to_cpu(pool->v.pg_num),
+ pool->pgp_num_mask);
+ pgid.ps = cpu_to_le16(t);
pg = __lookup_pg_mapping(&osdmap->pg_temp, pgid);
if (pg) {
*num = pg->len;
@@ -1057,18 +1070,6 @@ static int *calc_pg_raw(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
}
/* crush */
- poolid = le32_to_cpu(pgid.pool);
- ps = le16_to_cpu(pgid.ps);
- preferred = (s16)le16_to_cpu(pgid.preferred);
-
- /* don't forcefeed bad device ids to crush */
- if (preferred >= osdmap->max_osd ||
- preferred >= osdmap->crush->max_devices)
- preferred = -1;
-
- pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
- if (!pool)
- return NULL;
ruleno = crush_find_rule(osdmap->crush, pool->v.crush_ruleset,
pool->v.type, pool->v.size);
if (ruleno < 0) {
@@ -1078,6 +1079,11 @@ static int *calc_pg_raw(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
return NULL;
}
+ /* don't forcefeed bad device ids to crush */
+ if (preferred >= osdmap->max_osd ||
+ preferred >= osdmap->crush->max_devices)
+ preferred = -1;
+
if (preferred >= 0)
pps = ceph_stable_mod(ps,
le32_to_cpu(pool->v.lpgp_num),
diff --git a/net/core/dev.c b/net/core/dev.c
index 17d67b579be..b10ff0a7185 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1515,6 +1515,14 @@ static inline bool is_skb_forwardable(struct net_device *dev,
*/
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
+ if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
+ if (skb_copy_ubufs(skb, GFP_ATOMIC)) {
+ atomic_long_inc(&dev->rx_dropped);
+ kfree_skb(skb);
+ return NET_RX_DROP;
+ }
+ }
+
skb_orphan(skb);
nf_reset(skb);
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index e7ab0c0285b..3231b468bb7 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -384,8 +384,8 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
*/
list_for_each_entry(r, &ops->rules_list, list) {
if (r->action == FR_ACT_GOTO &&
- r->target == rule->pref) {
- BUG_ON(rtnl_dereference(r->ctarget) != NULL);
+ r->target == rule->pref &&
+ rtnl_dereference(r->ctarget) == NULL) {
rcu_assign_pointer(r->ctarget, rule);
if (--ops->unresolved_rules == 0)
break;
diff --git a/net/core/flow.c b/net/core/flow.c
index bf32c33cad3..555a456efb0 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -30,6 +30,7 @@ struct flow_cache_entry {
struct hlist_node hlist;
struct list_head gc_list;
} u;
+ struct net *net;
u16 family;
u8 dir;
u32 genid;
@@ -172,29 +173,26 @@ static void flow_new_hash_rnd(struct flow_cache *fc,
static u32 flow_hash_code(struct flow_cache *fc,
struct flow_cache_percpu *fcp,
- const struct flowi *key)
+ const struct flowi *key,
+ size_t keysize)
{
const u32 *k = (const u32 *) key;
+ const u32 length = keysize * sizeof(flow_compare_t) / sizeof(u32);
- return jhash2(k, (sizeof(*key) / sizeof(u32)), fcp->hash_rnd)
+ return jhash2(k, length, fcp->hash_rnd)
& (flow_cache_hash_size(fc) - 1);
}
-typedef unsigned long flow_compare_t;
-
/* I hear what you're saying, use memcmp. But memcmp cannot make
- * important assumptions that we can here, such as alignment and
- * constant size.
+ * important assumptions that we can here, such as alignment.
*/
-static int flow_key_compare(const struct flowi *key1, const struct flowi *key2)
+static int flow_key_compare(const struct flowi *key1, const struct flowi *key2,
+ size_t keysize)
{
const flow_compare_t *k1, *k1_lim, *k2;
- const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t);
-
- BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t));
k1 = (const flow_compare_t *) key1;
- k1_lim = k1 + n_elem;
+ k1_lim = k1 + keysize;
k2 = (const flow_compare_t *) key2;
@@ -215,6 +213,7 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir,
struct flow_cache_entry *fle, *tfle;
struct hlist_node *entry;
struct flow_cache_object *flo;
+ size_t keysize;
unsigned int hash;
local_bh_disable();
@@ -222,6 +221,11 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir,
fle = NULL;
flo = NULL;
+
+ keysize = flow_key_size(family);
+ if (!keysize)
+ goto nocache;
+
/* Packet really early in init? Making flow_cache_init a
* pre-smp initcall would solve this. --RR */
if (!fcp->hash_table)
@@ -230,11 +234,12 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir,
if (fcp->hash_rnd_recalc)
flow_new_hash_rnd(fc, fcp);
- hash = flow_hash_code(fc, fcp, key);
+ hash = flow_hash_code(fc, fcp, key, keysize);
hlist_for_each_entry(tfle, entry, &fcp->hash_table[hash], u.hlist) {
- if (tfle->family == family &&
+ if (tfle->net == net &&
+ tfle->family == family &&
tfle->dir == dir &&
- flow_key_compare(key, &tfle->key) == 0) {
+ flow_key_compare(key, &tfle->key, keysize) == 0) {
fle = tfle;
break;
}
@@ -246,9 +251,10 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir,
fle = kmem_cache_alloc(flow_cachep, GFP_ATOMIC);
if (fle) {
+ fle->net = net;
fle->family = family;
fle->dir = dir;
- memcpy(&fle->key, key, sizeof(*key));
+ memcpy(&fle->key, key, keysize * sizeof(flow_compare_t));
fle->object = NULL;
hlist_add_head(&fle->u.hlist, &fcp->hash_table[hash]);
fcp->hash_count++;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 27002dffe7e..387703f56fc 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -611,8 +611,21 @@ struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src)
}
EXPORT_SYMBOL_GPL(skb_morph);
-/* skb frags copy userspace buffers to kernel */
-static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
+/* skb_copy_ubufs - copy userspace skb frags buffers to kernel
+ * @skb: the skb to modify
+ * @gfp_mask: allocation priority
+ *
+ * This must be called on SKBTX_DEV_ZEROCOPY skb.
+ * It will copy all frags into kernel and drop the reference
+ * to userspace pages.
+ *
+ * If this function is called from an interrupt gfp_mask() must be
+ * %GFP_ATOMIC.
+ *
+ * Returns 0 on success or a negative error code on failure
+ * to allocate kernel memory to copy to.
+ */
+int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
{
int i;
int num_frags = skb_shinfo(skb)->nr_frags;
@@ -652,6 +665,8 @@ static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
skb_shinfo(skb)->frags[i - 1].page = head;
head = (struct page *)head->private;
}
+
+ skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
return 0;
}
@@ -677,7 +692,6 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask)
if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
if (skb_copy_ubufs(skb, gfp_mask))
return NULL;
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
n = skb + 1;
@@ -803,7 +817,6 @@ struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask)
n = NULL;
goto out;
}
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i];
@@ -896,7 +909,6 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
if (skb_copy_ubufs(skb, gfp_mask))
goto nofrags;
- skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
}
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
get_page(skb_shinfo(skb)->frags[i].page);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 27997d35ebd..a2468363978 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -340,7 +340,7 @@ void ether_setup(struct net_device *dev)
dev->addr_len = ETH_ALEN;
dev->tx_queue_len = 1000; /* Ethernet wants good queues */
dev->flags = IFF_BROADCAST|IFF_MULTICAST;
- dev->priv_flags = IFF_TX_SKB_SHARING;
+ dev->priv_flags |= IFF_TX_SKB_SHARING;
memset(dev->broadcast, 0xFF, ETH_ALEN);
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 1b745d412cf..dd2b9478ddd 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -466,8 +466,13 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
goto out;
if (addr->sin_family != AF_INET) {
+ /* Compatibility games : accept AF_UNSPEC (mapped to AF_INET)
+ * only if s_addr is INADDR_ANY.
+ */
err = -EAFNOSUPPORT;
- goto out;
+ if (addr->sin_family != AF_UNSPEC ||
+ addr->sin_addr.s_addr != htonl(INADDR_ANY))
+ goto out;
}
chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 33e2c35b74b..80106d89d54 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -142,6 +142,14 @@ const struct fib_prop fib_props[RTN_MAX + 1] = {
};
/* Release a nexthop info record */
+static void free_fib_info_rcu(struct rcu_head *head)
+{
+ struct fib_info *fi = container_of(head, struct fib_info, rcu);
+
+ if (fi->fib_metrics != (u32 *) dst_default_metrics)
+ kfree(fi->fib_metrics);
+ kfree(fi);
+}
void free_fib_info(struct fib_info *fi)
{
@@ -156,7 +164,7 @@ void free_fib_info(struct fib_info *fi)
} endfor_nexthops(fi);
fib_info_cnt--;
release_net(fi->fib_net);
- kfree_rcu(fi, rcu);
+ call_rcu(&fi->rcu, free_fib_info_rcu);
}
void fib_release_info(struct fib_info *fi)
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 5c9b9d96391..e59aabd0eae 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp)
return skb;
nlmsg_failure:
+ kfree_skb(skb);
*errp = -EINVAL;
printk(KERN_ERR "ip_queue: error creating packet message\n");
return NULL;
@@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len)
{
struct nf_queue_entry *entry;
- if (vmsg->value > NF_MAX_VERDICT)
+ if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
return -EINVAL;
entry = ipq_find_dequeue_entry(vmsg->id);
@@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg,
break;
case IPQM_VERDICT:
- if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
- status = -EINVAL;
- else
- status = ipq_set_verdict(&pmsg->msg.verdict,
- len - sizeof(*pmsg));
- break;
+ status = ipq_set_verdict(&pmsg->msg.verdict,
+ len - sizeof(*pmsg));
+ break;
default:
status = -EINVAL;
}
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index b14ec7d03b6..4bfad5da94f 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -254,6 +254,8 @@ static const struct snmp_mib snmp4_net_list[] = {
SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
+ SNMP_MIB_ITEM("TCPReqQFullDoCookies", LINUX_MIB_TCPREQQFULLDOCOOKIES),
+ SNMP_MIB_ITEM("TCPReqQFullDrop", LINUX_MIB_TCPREQQFULLDROP),
SNMP_MIB_SENTINEL
};
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ea0d2183df4..21fab3edb92 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1124,7 +1124,7 @@ static int tcp_is_sackblock_valid(struct tcp_sock *tp, int is_dsack,
return 0;
/* ...Then it's D-SACK, and must reside below snd_una completely */
- if (!after(end_seq, tp->snd_una))
+ if (after(end_seq, tp->snd_una))
return 0;
if (!before(start_seq, tp->undo_marker))
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 1c12b8ec849..c34f0151394 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -808,20 +808,38 @@ static void tcp_v4_reqsk_destructor(struct request_sock *req)
kfree(inet_rsk(req)->opt);
}
-static void syn_flood_warning(const struct sk_buff *skb)
+/*
+ * Return 1 if a syncookie should be sent
+ */
+int tcp_syn_flood_action(struct sock *sk,
+ const struct sk_buff *skb,
+ const char *proto)
{
- const char *msg;
+ const char *msg = "Dropping request";
+ int want_cookie = 0;
+ struct listen_sock *lopt;
+
+
#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
+ if (sysctl_tcp_syncookies) {
msg = "Sending cookies";
- else
+ want_cookie = 1;
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES);
+ } else
#endif
- msg = "Dropping request";
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP);
- pr_info("TCP: Possible SYN flooding on port %d. %s.\n",
- ntohs(tcp_hdr(skb)->dest), msg);
+ lopt = inet_csk(sk)->icsk_accept_queue.listen_opt;
+ if (!lopt->synflood_warned) {
+ lopt->synflood_warned = 1;
+ pr_info("%s: Possible SYN flooding on port %d. %s. "
+ " Check SNMP counters.\n",
+ proto, ntohs(tcp_hdr(skb)->dest), msg);
+ }
+ return want_cookie;
}
+EXPORT_SYMBOL(tcp_syn_flood_action);
/*
* Save and compile IPv4 options into the request_sock if needed.
@@ -1235,11 +1253,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
__be32 saddr = ip_hdr(skb)->saddr;
__be32 daddr = ip_hdr(skb)->daddr;
__u32 isn = TCP_SKB_CB(skb)->when;
-#ifdef CONFIG_SYN_COOKIES
int want_cookie = 0;
-#else
-#define want_cookie 0 /* Argh, why doesn't gcc optimize this :( */
-#endif
/* Never answer to SYNs send to broadcast or multicast */
if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
@@ -1250,14 +1264,9 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
* evidently real one.
*/
if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
- if (net_ratelimit())
- syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies) {
- want_cookie = 1;
- } else
-#endif
- goto drop;
+ want_cookie = tcp_syn_flood_action(sk, skb, "TCP");
+ if (!want_cookie)
+ goto drop;
}
/* Accept backlog is full. If we have already queued enough
@@ -1303,9 +1312,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
while (l-- > 0)
*c++ ^= *hash_location++;
-#ifdef CONFIG_SYN_COOKIES
want_cookie = 0; /* not our kind of cookie */
-#endif
tmp_ext.cookie_out_never = 0; /* false */
tmp_ext.cookie_plus = tmp_opt.cookie_plus;
} else if (!tp->rx_opt.cookie_in_always) {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f012ebd87b4..12368c58606 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -374,8 +374,8 @@ static struct inet6_dev * ipv6_add_dev(struct net_device *dev)
"%s(): cannot allocate memory for statistics; dev=%s.\n",
__func__, dev->name));
neigh_parms_release(&nd_tbl, ndev->nd_parms);
- ndev->dead = 1;
- in6_dev_finish_destroy(ndev);
+ dev_put(dev);
+ kfree(ndev);
return NULL;
}
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 9ef1831746e..b46e9f88ce3 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -599,7 +599,7 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb)
return 0;
}
-int datagram_send_ctl(struct net *net,
+int datagram_send_ctl(struct net *net, struct sock *sk,
struct msghdr *msg, struct flowi6 *fl6,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass, int *dontfrag)
@@ -658,7 +658,8 @@ int datagram_send_ctl(struct net *net,
if (addr_type != IPV6_ADDR_ANY) {
int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
- if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+ if (!inet_sk(sk)->transparent &&
+ !ipv6_chk_addr(net, &src_info->ipi6_addr,
strict ? dev : NULL, 0))
err = -EINVAL;
else
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index f3caf1b8d57..54303945019 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -322,8 +322,8 @@ static int fl6_renew(struct ip6_flowlabel *fl, unsigned long linger, unsigned lo
}
static struct ip6_flowlabel *
-fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
- int optlen, int *err_p)
+fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq,
+ char __user *optval, int optlen, int *err_p)
{
struct ip6_flowlabel *fl = NULL;
int olen;
@@ -360,7 +360,7 @@ fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
msg.msg_control = (void*)(fl->opt+1);
memset(&flowi6, 0, sizeof(flowi6));
- err = datagram_send_ctl(net, &msg, &flowi6, fl->opt, &junk,
+ err = datagram_send_ctl(net, sk, &msg, &flowi6, fl->opt, &junk,
&junk, &junk);
if (err)
goto done;
@@ -528,7 +528,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen)
if (freq.flr_label & ~IPV6_FLOWLABEL_MASK)
return -EINVAL;
- fl = fl_create(net, &freq, optval, optlen, &err);
+ fl = fl_create(net, sk, &freq, optval, optlen, &err);
if (fl == NULL)
return err;
sfl1 = kmalloc(sizeof(*sfl1), GFP_KERNEL);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 705c8288628..def0538e241 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -696,8 +696,10 @@ static netdev_tx_t reg_vif_xmit(struct sk_buff *skb,
int err;
err = ip6mr_fib_lookup(net, &fl6, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
dev->stats.tx_bytes += skb->len;
@@ -2052,8 +2054,10 @@ int ip6_mr_input(struct sk_buff *skb)
int err;
err = ip6mr_fib_lookup(net, &fl6, &mrt);
- if (err < 0)
+ if (err < 0) {
+ kfree_skb(skb);
return err;
+ }
read_lock(&mrt_lock);
cache = ip6mr_cache_find(mrt,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 147ede38ab4..2fbda5fc4cc 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -475,7 +475,7 @@ sticky_done:
msg.msg_controllen = optlen;
msg.msg_control = (void*)(opt+1);
- retv = datagram_send_ctl(net, &msg, &fl6, opt, &junk, &junk,
+ retv = datagram_send_ctl(net, sk, &msg, &fl6, opt, &junk, &junk,
&junk);
if (retv)
goto done;
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 24939486328..e63c3972a73 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp)
return skb;
nlmsg_failure:
+ kfree_skb(skb);
*errp = -EINVAL;
printk(KERN_ERR "ip6_queue: error creating packet message\n");
return NULL;
@@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len)
{
struct nf_queue_entry *entry;
- if (vmsg->value > NF_MAX_VERDICT)
+ if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
return -EINVAL;
entry = ipq_find_dequeue_entry(vmsg->id);
@@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg,
break;
case IPQM_VERDICT:
- if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
- status = -EINVAL;
- else
- status = ipq_set_verdict(&pmsg->msg.verdict,
- len - sizeof(*pmsg));
- break;
+ status = ipq_set_verdict(&pmsg->msg.verdict,
+ len - sizeof(*pmsg));
+ break;
default:
status = -EINVAL;
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 6a79f3081bd..343852e5c70 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -817,8 +817,8 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk,
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
- err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
- &tclass, &dontfrag);
+ err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+ &hlimit, &tclass, &dontfrag);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9e69eb0ec6d..fb545edef6e 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -104,6 +104,9 @@ static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old)
struct inet_peer *peer;
u32 *p = NULL;
+ if (!(rt->dst.flags & DST_HOST))
+ return NULL;
+
if (!rt->rt6i_peer)
rt6_bind_peer(rt, 1);
@@ -241,7 +244,9 @@ static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops,
{
struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, flags);
- memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+ if (rt != NULL)
+ memset(&rt->rt6i_table, 0,
+ sizeof(*rt) - sizeof(struct dst_entry));
return rt;
}
@@ -252,6 +257,9 @@ static void ip6_dst_destroy(struct dst_entry *dst)
struct inet6_dev *idev = rt->rt6i_idev;
struct inet_peer *peer = rt->rt6i_peer;
+ if (!(rt->dst.flags & DST_HOST))
+ dst_destroy_metrics_generic(dst);
+
if (idev != NULL) {
rt->rt6i_idev = NULL;
in6_dev_put(idev);
@@ -723,9 +731,7 @@ static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort,
ipv6_addr_copy(&rt->rt6i_gateway, daddr);
}
- rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
- rt->dst.flags |= DST_HOST;
#ifdef CONFIG_IPV6_SUBTREES
if (rt->rt6i_src.plen && saddr) {
@@ -775,9 +781,7 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort,
struct rt6_info *rt = ip6_rt_copy(ort, daddr);
if (rt) {
- rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
- rt->dst.flags |= DST_HOST;
dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst)));
}
return rt;
@@ -1078,12 +1082,15 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
neigh = NULL;
}
- rt->rt6i_idev = idev;
+ rt->dst.flags |= DST_HOST;
+ rt->dst.output = ip6_output;
dst_set_neighbour(&rt->dst, neigh);
atomic_set(&rt->dst.__refcnt, 1);
- ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
- rt->dst.output = ip6_output;
+
+ ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
+ rt->rt6i_dst.plen = 128;
+ rt->rt6i_idev = idev;
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
@@ -1261,6 +1268,14 @@ int ip6_route_add(struct fib6_config *cfg)
if (rt->rt6i_dst.plen == 128)
rt->dst.flags |= DST_HOST;
+ if (!(rt->dst.flags & DST_HOST) && cfg->fc_mx) {
+ u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+ if (!metrics) {
+ err = -ENOMEM;
+ goto out;
+ }
+ dst_init_metrics(&rt->dst, metrics, 0);
+ }
#ifdef CONFIG_IPV6_SUBTREES
ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len);
rt->rt6i_src.plen = cfg->fc_src_len;
@@ -1607,9 +1622,6 @@ void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src,
if (on_link)
nrt->rt6i_flags &= ~RTF_GATEWAY;
- nrt->rt6i_dst.plen = 128;
- nrt->dst.flags |= DST_HOST;
-
ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key);
dst_set_neighbour(&nrt->dst, neigh_clone(neigh));
@@ -1754,9 +1766,10 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort,
if (rt) {
rt->dst.input = ort->dst.input;
rt->dst.output = ort->dst.output;
+ rt->dst.flags |= DST_HOST;
ipv6_addr_copy(&rt->rt6i_dst.addr, dest);
- rt->rt6i_dst.plen = ort->rt6i_dst.plen;
+ rt->rt6i_dst.plen = 128;
dst_copy_metrics(&rt->dst, &ort->dst);
rt->dst.error = ort->dst.error;
rt->rt6i_idev = ort->rt6i_idev;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index d1fb63f4aeb..79cc6469508 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -531,20 +531,6 @@ static int tcp_v6_rtx_synack(struct sock *sk, struct request_sock *req,
return tcp_v6_send_synack(sk, req, rvp);
}
-static inline void syn_flood_warning(struct sk_buff *skb)
-{
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
- printk(KERN_INFO
- "TCPv6: Possible SYN flooding on port %d. "
- "Sending cookies.\n", ntohs(tcp_hdr(skb)->dest));
- else
-#endif
- printk(KERN_INFO
- "TCPv6: Possible SYN flooding on port %d. "
- "Dropping request.\n", ntohs(tcp_hdr(skb)->dest));
-}
-
static void tcp_v6_reqsk_destructor(struct request_sock *req)
{
kfree_skb(inet6_rsk(req)->pktopts);
@@ -1179,11 +1165,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
struct tcp_sock *tp = tcp_sk(sk);
__u32 isn = TCP_SKB_CB(skb)->when;
struct dst_entry *dst = NULL;
-#ifdef CONFIG_SYN_COOKIES
int want_cookie = 0;
-#else
-#define want_cookie 0
-#endif
if (skb->protocol == htons(ETH_P_IP))
return tcp_v4_conn_request(sk, skb);
@@ -1192,14 +1174,9 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
goto drop;
if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
- if (net_ratelimit())
- syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
- if (sysctl_tcp_syncookies)
- want_cookie = 1;
- else
-#endif
- goto drop;
+ want_cookie = tcp_syn_flood_action(sk, skb, "TCPv6");
+ if (!want_cookie)
+ goto drop;
}
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
@@ -1249,9 +1226,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
while (l-- > 0)
*c++ ^= *hash_location++;
-#ifdef CONFIG_SYN_COOKIES
want_cookie = 0; /* not our kind of cookie */
-#endif
tmp_ext.cookie_out_never = 0; /* false */
tmp_ext.cookie_plus = tmp_opt.cookie_plus;
} else if (!tp->rx_opt.cookie_in_always) {
@@ -1408,6 +1383,8 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
#endif
+ newnp->ipv6_ac_list = NULL;
+ newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = inet6_iif(skb);
@@ -1472,6 +1449,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
First: no IPv4 options.
*/
newinet->inet_opt = NULL;
+ newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
/* Clone RX bits */
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 29213b51c49..bb95e8e1c6f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1090,8 +1090,8 @@ do_udp_sendmsg:
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(*opt);
- err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
- &tclass, &dontfrag);
+ err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+ &hlimit, &tclass, &dontfrag);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c
index d0b70dadf73..2615ffc8e78 100644
--- a/net/irda/irsysctl.c
+++ b/net/irda/irsysctl.c
@@ -40,9 +40,9 @@ extern int sysctl_slot_timeout;
extern int sysctl_fast_poll_increase;
extern char sysctl_devname[];
extern int sysctl_max_baud_rate;
-extern int sysctl_min_tx_turn_time;
-extern int sysctl_max_tx_data_size;
-extern int sysctl_max_tx_window;
+extern unsigned int sysctl_min_tx_turn_time;
+extern unsigned int sysctl_max_tx_data_size;
+extern unsigned int sysctl_max_tx_window;
extern int sysctl_max_noreply_time;
extern int sysctl_warn_noreply_time;
extern int sysctl_lap_keepalive_time;
diff --git a/net/irda/qos.c b/net/irda/qos.c
index 1b51bcf4239..4369f7f41bc 100644
--- a/net/irda/qos.c
+++ b/net/irda/qos.c
@@ -60,7 +60,7 @@ int sysctl_max_noreply_time = 12;
* Default is 10us which means using the unmodified value given by the
* peer except if it's 0 (0 is likely a bug in the other stack).
*/
-unsigned sysctl_min_tx_turn_time = 10;
+unsigned int sysctl_min_tx_turn_time = 10;
/*
* Maximum data size to be used in transmission in payload of LAP frame.
* There is a bit of confusion in the IrDA spec :
@@ -75,13 +75,13 @@ unsigned sysctl_min_tx_turn_time = 10;
* bytes frames or all negotiated frame sizes, but you can use the sysctl
* to play with this value anyway.
* Jean II */
-unsigned sysctl_max_tx_data_size = 2042;
+unsigned int sysctl_max_tx_data_size = 2042;
/*
* Maximum transmit window, i.e. number of LAP frames between turn-around.
* This allow to override what the peer told us. Some peers are buggy and
* don't always support what they tell us.
* Jean II */
-unsigned sysctl_max_tx_window = 7;
+unsigned int sysctl_max_tx_window = 7;
static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 3db78b696c5..21070e9bc8d 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -665,7 +665,7 @@ static int __must_check __sta_info_destroy(struct sta_info *sta)
BUG_ON(!sdata->bss);
atomic_dec(&sdata->bss->num_sta_ps);
- __sta_info_clear_tim_bit(sdata->bss, sta);
+ sta_info_clear_tim_bit(sta);
}
local->num_sta--;
diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c
index 2fd4565144d..31d56b23b9e 100644
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -364,6 +364,7 @@ pptp_inbound_pkt(struct sk_buff *skb,
break;
case PPTP_WAN_ERROR_NOTIFY:
+ case PPTP_SET_LINK_INFO:
case PPTP_ECHO_REQUEST:
case PPTP_ECHO_REPLY:
/* I don't have to explain these ;) */
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 37bf94394be..8235b86b4e8 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -409,7 +409,7 @@ static void tcp_options(const struct sk_buff *skb,
if (opsize < 2) /* "silly options" */
return;
if (opsize > length)
- break; /* don't parse partial options */
+ return; /* don't parse partial options */
if (opcode == TCPOPT_SACK_PERM
&& opsize == TCPOLEN_SACK_PERM)
@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff,
BUG_ON(ptr == NULL);
/* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED*4
+ if (length == TCPOLEN_TSTAMP_ALIGNED
&& *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
| (TCPOPT_NOP << 16)
| (TCPOPT_TIMESTAMP << 8)
@@ -469,7 +469,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff,
if (opsize < 2) /* "silly options" */
return;
if (opsize > length)
- break; /* don't parse partial options */
+ return; /* don't parse partial options */
if (opcode == TCPOPT_SACK
&& opsize >= (TCPOLEN_SACK_BASE
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 00bd475eab4..a80b0cb03f1 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -646,8 +646,8 @@ verdicthdr_get(const struct nlattr * const nfqa[])
return NULL;
vhdr = nla_data(nfqa[NFQA_VERDICT_HDR]);
- verdict = ntohl(vhdr->verdict);
- if ((verdict & NF_VERDICT_MASK) > NF_MAX_VERDICT)
+ verdict = ntohl(vhdr->verdict) & NF_VERDICT_MASK;
+ if (verdict > NF_MAX_VERDICT || verdict == NF_STOLEN)
return NULL;
return vhdr;
}
diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c
index 76a083184d8..ed0db15ab00 100644
--- a/net/netfilter/xt_rateest.c
+++ b/net/netfilter/xt_rateest.c
@@ -78,7 +78,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par)
{
struct xt_rateest_match_info *info = par->matchinfo;
struct xt_rateest *est1, *est2;
- int ret = false;
+ int ret = -EINVAL;
if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS |
XT_RATEEST_MATCH_REL)) != 1)
@@ -101,13 +101,12 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par)
if (!est1)
goto err1;
+ est2 = NULL;
if (info->flags & XT_RATEEST_MATCH_REL) {
est2 = xt_rateest_lookup(info->name2);
if (!est2)
goto err2;
- } else
- est2 = NULL;
-
+ }
info->est1 = est1;
info->est2 = est2;
@@ -116,7 +115,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par)
err2:
xt_rateest_put(est1);
err1:
- return -EINVAL;
+ return ret;
}
static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index c698cec0a44..fabb4fafa28 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -961,7 +961,10 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
return 0;
drop_n_acct:
- po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
+ spin_lock(&sk->sk_receive_queue.lock);
+ po->stats.tp_drops++;
+ atomic_inc(&sk->sk_drops);
+ spin_unlock(&sk->sk_receive_queue.lock);
drop_n_restore:
if (skb_head != skb->data && skb_shared(skb)) {
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index 8b77edbab27..4e1de171866 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -84,7 +84,8 @@ static int rds_iw_map_fastreg(struct rds_iw_mr_pool *pool,
static void rds_iw_free_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
struct list_head *unmap_list,
- struct list_head *kill_list);
+ struct list_head *kill_list,
+ int *unpinned);
static void rds_iw_destroy_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
static int rds_iw_get_device(struct rds_sock *rs, struct rds_iw_device **rds_iwdev, struct rdma_cm_id **cm_id)
@@ -499,7 +500,7 @@ static int rds_iw_flush_mr_pool(struct rds_iw_mr_pool *pool, int free_all)
LIST_HEAD(unmap_list);
LIST_HEAD(kill_list);
unsigned long flags;
- unsigned int nfreed = 0, ncleaned = 0, free_goal;
+ unsigned int nfreed = 0, ncleaned = 0, unpinned = 0, free_goal;
int ret = 0;
rds_iw_stats_inc(s_iw_rdma_mr_pool_flush);
@@ -524,7 +525,8 @@ static int rds_iw_flush_mr_pool(struct rds_iw_mr_pool *pool, int free_all)
* will be destroyed by the unmap function.
*/
if (!list_empty(&unmap_list)) {
- ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list, &kill_list);
+ ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list,
+ &kill_list, &unpinned);
/* If we've been asked to destroy all MRs, move those
* that were simply cleaned to the kill list */
if (free_all)
@@ -548,6 +550,7 @@ static int rds_iw_flush_mr_pool(struct rds_iw_mr_pool *pool, int free_all)
spin_unlock_irqrestore(&pool->list_lock, flags);
}
+ atomic_sub(unpinned, &pool->free_pinned);
atomic_sub(ncleaned, &pool->dirty_count);
atomic_sub(nfreed, &pool->item_count);
@@ -828,7 +831,8 @@ static void rds_iw_free_fastreg(struct rds_iw_mr_pool *pool,
static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
struct list_head *unmap_list,
- struct list_head *kill_list)
+ struct list_head *kill_list,
+ int *unpinned)
{
struct rds_iw_mapping *mapping, *next;
unsigned int ncleaned = 0;
@@ -855,6 +859,7 @@ static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
spin_lock_irqsave(&pool->list_lock, flags);
list_for_each_entry_safe(mapping, next, unmap_list, m_list) {
+ *unpinned += mapping->m_sg.len;
list_move(&mapping->m_list, &laundered);
ncleaned++;
}
diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h
index be4505ee67a..b01427924f8 100644
--- a/net/sched/cls_rsvp.h
+++ b/net/sched/cls_rsvp.h
@@ -425,7 +425,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base,
struct rsvp_filter *f, **fp;
struct rsvp_session *s, **sp;
struct tc_rsvp_pinfo *pinfo = NULL;
- struct nlattr *opt = tca[TCA_OPTIONS-1];
+ struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_RSVP_MAX + 1];
struct tcf_exts e;
unsigned int h1, h2;
@@ -439,7 +439,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base,
if (err < 0)
return err;
- err = tcf_exts_validate(tp, tb, tca[TCA_RATE-1], &e, &rsvp_ext_map);
+ err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map);
if (err < 0)
return err;
@@ -449,8 +449,8 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base,
if (f->handle != handle && handle)
goto errout2;
- if (tb[TCA_RSVP_CLASSID-1]) {
- f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+ if (tb[TCA_RSVP_CLASSID]) {
+ f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
tcf_bind_filter(tp, &f->res, base);
}
@@ -462,7 +462,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base,
err = -EINVAL;
if (handle)
goto errout2;
- if (tb[TCA_RSVP_DST-1] == NULL)
+ if (tb[TCA_RSVP_DST] == NULL)
goto errout2;
err = -ENOBUFS;
@@ -471,19 +471,19 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base,
goto errout2;
h2 = 16;
- if (tb[TCA_RSVP_SRC-1]) {
- memcpy(f->src, nla_data(tb[TCA_RSVP_SRC-1]), sizeof(f->src));
+ if (tb[TCA_RSVP_SRC]) {
+ memcpy(f->src, nla_data(tb[TCA_RSVP_SRC]), sizeof(f->src));
h2 = hash_src(f->src);
}
- if (tb[TCA_RSVP_PINFO-1]) {
- pinfo = nla_data(tb[TCA_RSVP_PINFO-1]);
+ if (tb[TCA_RSVP_PINFO]) {
+ pinfo = nla_data(tb[TCA_RSVP_PINFO]);
f->spi = pinfo->spi;
f->tunnelhdr = pinfo->tunnelhdr;
}
- if (tb[TCA_RSVP_CLASSID-1])
- f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+ if (tb[TCA_RSVP_CLASSID])
+ f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
- dst = nla_data(tb[TCA_RSVP_DST-1]);
+ dst = nla_data(tb[TCA_RSVP_DST]);
h1 = hash_dst(dst, pinfo ? pinfo->protocol : 0, pinfo ? pinfo->tunnelid : 0);
err = -ENOMEM;
@@ -642,8 +642,7 @@ nla_put_failure:
return -1;
}
-static struct tcf_proto_ops RSVP_OPS = {
- .next = NULL,
+static struct tcf_proto_ops RSVP_OPS __read_mostly = {
.kind = RSVP_ID,
.classify = rsvp_classify,
.init = rsvp_init,
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 167c880cf8d..76388b083f2 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1689,6 +1689,11 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
case SCTP_CMD_PURGE_ASCONF_QUEUE:
sctp_asconf_queue_teardown(asoc);
break;
+
+ case SCTP_CMD_SET_ASOC:
+ asoc = cmd->obj.asoc;
+ break;
+
default:
pr_warn("Impossible command: %u, %p\n",
cmd->verb, cmd->obj.ptr);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 49b847b00f9..a0f31e6c1c6 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -2047,6 +2047,12 @@ sctp_disposition_t sctp_sf_do_5_2_4_dupcook(const struct sctp_endpoint *ep,
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
+ /* Restore association pointer to provide SCTP command interpeter
+ * with a valid context in case it needs to manipulate
+ * the queues */
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC,
+ SCTP_ASOC((struct sctp_association *)asoc));
+
return retval;
nomem:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e83e7fee3bc..ea40d540a99 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4113,9 +4113,12 @@ static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
if (len % sizeof(u32))
return -EINVAL;
+ if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
+ return -EINVAL;
+
memcpy(settings->akm_suites, data, len);
- for (i = 0; i < settings->n_ciphers_pairwise; i++)
+ for (i = 0; i < settings->n_akm_suites; i++)
if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
return -EINVAL;
}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 02751dbc5a9..68a471ba193 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -852,6 +852,7 @@ static void handle_channel(struct wiphy *wiphy,
return;
}
+ chan->beacon_found = false;
chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
(int) MBI_TO_DBI(power_rule->max_antenna_gain));
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index b7b6ff8be55..dec0fa28372 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -118,6 +118,8 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev)
i++, j++)
request->channels[i] =
&wdev->wiphy->bands[band]->channels[j];
+ request->rates[band] =
+ (1 << wdev->wiphy->bands[band]->n_bitrates) - 1;
}
}
request->n_channels = n_channels;
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index a026b0ef244..54a0dc2e2f8 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -212,6 +212,11 @@ resume:
/* only the first xfrm gets the encap type */
encap_type = 0;
+ if (async && x->repl->check(x, skb, seq)) {
+ XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
+ goto drop_unlock;
+ }
+
x->repl->advance(x, seq);
x->curlft.bytes += skb->len;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 94fdcc7f103..552df27dcf5 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1349,14 +1349,16 @@ static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family)
BUG();
}
xdst = dst_alloc(dst_ops, NULL, 0, 0, 0);
- memset(&xdst->u.rt6.rt6i_table, 0, sizeof(*xdst) - sizeof(struct dst_entry));
- xfrm_policy_put_afinfo(afinfo);
- if (likely(xdst))
+ if (likely(xdst)) {
+ memset(&xdst->u.rt6.rt6i_table, 0,
+ sizeof(*xdst) - sizeof(struct dst_entry));
xdst->flo.ops = &xfrm_bundle_fc_ops;
- else
+ } else
xdst = ERR_PTR(-ENOBUFS);
+ xfrm_policy_put_afinfo(afinfo);
+
return xdst;
}
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 86d0caf91b3..62e90b862a0 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1761,6 +1761,10 @@ static int wait_for_avail(struct snd_pcm_substream *substream,
snd_pcm_uframes_t avail = 0;
long wait_time, tout;
+ init_waitqueue_entry(&wait, current);
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&runtime->tsleep, &wait);
+
if (runtime->no_period_wakeup)
wait_time = MAX_SCHEDULE_TIMEOUT;
else {
@@ -1771,16 +1775,32 @@ static int wait_for_avail(struct snd_pcm_substream *substream,
}
wait_time = msecs_to_jiffies(wait_time * 1000);
}
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&runtime->tsleep, &wait);
+
for (;;) {
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
}
+
+ /*
+ * We need to check if space became available already
+ * (and thus the wakeup happened already) first to close
+ * the race of space already having become available.
+ * This check must happen after been added to the waitqueue
+ * and having current state be INTERRUPTIBLE.
+ */
+ if (is_playback)
+ avail = snd_pcm_playback_avail(runtime);
+ else
+ avail = snd_pcm_capture_avail(runtime);
+ if (avail >= runtime->twake)
+ break;
snd_pcm_stream_unlock_irq(substream);
- tout = schedule_timeout_interruptible(wait_time);
+
+ tout = schedule_timeout(wait_time);
+
snd_pcm_stream_lock_irq(substream);
+ set_current_state(TASK_INTERRUPTIBLE);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SUSPENDED:
err = -ESTRPIPE;
@@ -1806,14 +1826,9 @@ static int wait_for_avail(struct snd_pcm_substream *substream,
err = -EIO;
break;
}
- if (is_playback)
- avail = snd_pcm_playback_avail(runtime);
- else
- avail = snd_pcm_capture_avail(runtime);
- if (avail >= runtime->twake)
- break;
}
_endloop:
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&runtime->tsleep, &wait);
*availp = avail;
return err;
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index f9123f09e83..32b02d90670 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -68,6 +68,7 @@ MODULE_PARM_DESC(enable, "Enable FM801 soundcard.");
module_param_array(tea575x_tuner, int, NULL, 0444);
MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only).");
+#define TUNER_DISABLED (1<<3)
#define TUNER_ONLY (1<<4)
#define TUNER_TYPE_MASK (~TUNER_ONLY & 0xFFFF)
@@ -1150,7 +1151,8 @@ static int snd_fm801_free(struct fm801 *chip)
__end_hw:
#ifdef CONFIG_SND_FM801_TEA575X_BOOL
- snd_tea575x_exit(&chip->tea);
+ if (!(chip->tea575x_tuner & TUNER_DISABLED))
+ snd_tea575x_exit(&chip->tea);
#endif
if (chip->irq >= 0)
free_irq(chip->irq, chip);
@@ -1236,7 +1238,6 @@ static int __devinit snd_fm801_create(struct snd_card *card,
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
if (snd_tea575x_init(&chip->tea)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
- snd_fm801_free(chip);
return -ENODEV;
}
} else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) {
@@ -1251,11 +1252,15 @@ static int __devinit snd_fm801_create(struct snd_card *card,
}
if (tea575x_tuner == 4) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
- snd_fm801_free(chip);
- return -ENODEV;
+ chip->tea575x_tuner = TUNER_DISABLED;
}
}
- strlcpy(chip->tea.card, snd_fm801_tea575x_gpios[(tea575x_tuner & TUNER_TYPE_MASK) - 1].name, sizeof(chip->tea.card));
+ if (!(chip->tea575x_tuner & TUNER_DISABLED)) {
+ strlcpy(chip->tea.card,
+ snd_fm801_tea575x_gpios[(tea575x_tuner &
+ TUNER_TYPE_MASK) - 1].name,
+ sizeof(chip->tea.card));
+ }
#endif
*rchip = chip;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 3e7850c238c..f3aefef3721 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -579,9 +579,13 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux,
return -1;
}
recursive++;
- for (i = 0; i < nums; i++)
+ for (i = 0; i < nums; i++) {
+ unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i]));
+ if (type == AC_WID_PIN || type == AC_WID_AUD_OUT)
+ continue;
if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0)
return i;
+ }
return -1;
}
EXPORT_SYMBOL_HDA(snd_hda_get_conn_index);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index be6982289c0..e9a2a8795d1 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1924,7 +1924,8 @@ static unsigned int azx_via_get_position(struct azx *chip,
}
static unsigned int azx_get_position(struct azx *chip,
- struct azx_dev *azx_dev)
+ struct azx_dev *azx_dev,
+ bool with_check)
{
unsigned int pos;
int stream = azx_dev->substream->stream;
@@ -1940,7 +1941,7 @@ static unsigned int azx_get_position(struct azx *chip,
default:
/* use the position buffer */
pos = le32_to_cpu(*azx_dev->posbuf);
- if (chip->position_fix[stream] == POS_FIX_AUTO) {
+ if (with_check && chip->position_fix[stream] == POS_FIX_AUTO) {
if (!pos || pos == (u32)-1) {
printk(KERN_WARNING
"hda-intel: Invalid position buffer, "
@@ -1964,7 +1965,7 @@ static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream)
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
return bytes_to_frames(substream->runtime,
- azx_get_position(chip, azx_dev));
+ azx_get_position(chip, azx_dev, false));
}
/*
@@ -1987,7 +1988,7 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
return -1; /* bogus (too early) interrupt */
stream = azx_dev->substream->stream;
- pos = azx_get_position(chip, azx_dev);
+ pos = azx_get_position(chip, azx_dev, true);
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index d6c93d92b55..c45f3e69bcf 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -535,7 +535,7 @@ static int add_volume(struct hda_codec *codec, const char *name,
int index, unsigned int pval, int dir,
struct snd_kcontrol **kctlp)
{
- char tmp[32];
+ char tmp[44];
struct snd_kcontrol_new knew =
HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
knew.private_value = pval;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7cabd731716..7a73621a890 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -168,7 +168,7 @@ struct alc_spec {
unsigned int auto_mic_valid_imux:1; /* valid imux for auto-mic */
unsigned int automute:1; /* HP automute enabled */
unsigned int detect_line:1; /* Line-out detection enabled */
- unsigned int automute_lines:1; /* automute line-out as well */
+ unsigned int automute_lines:1; /* automute line-out as well; NOP when automute_hp_lo isn't set */
unsigned int automute_hp_lo:1; /* both HP and LO available */
/* other flags */
@@ -551,7 +551,7 @@ static void update_speakers(struct hda_codec *codec)
if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] ||
spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0])
return;
- if (!spec->automute_lines || !spec->automute)
+ if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines))
on = 0;
else
on = spec->jack_present;
@@ -578,6 +578,10 @@ static void alc_line_automute(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
+ /* check LO jack only when it's different from HP */
+ if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0])
+ return;
+
spec->line_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins);
@@ -803,7 +807,7 @@ static int alc_automute_mode_get(struct snd_kcontrol *kcontrol,
unsigned int val;
if (!spec->automute)
val = 0;
- else if (!spec->automute_lines)
+ else if (!spec->automute_hp_lo || !spec->automute_lines)
val = 1;
else
val = 2;
@@ -824,7 +828,8 @@ static int alc_automute_mode_put(struct snd_kcontrol *kcontrol,
spec->automute = 0;
break;
case 1:
- if (spec->automute && !spec->automute_lines)
+ if (spec->automute &&
+ (!spec->automute_hp_lo || !spec->automute_lines))
return 0;
spec->automute = 1;
spec->automute_lines = 0;
@@ -1320,7 +1325,9 @@ do_sku:
* 15 : 1 --> enable the function "Mute internal speaker
* when the external headphone out jack is plugged"
*/
- if (!spec->autocfg.hp_pins[0]) {
+ if (!spec->autocfg.hp_pins[0] &&
+ !(spec->autocfg.line_out_pins[0] &&
+ spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
hda_nid_t nid;
tmp = (ass >> 11) & 0x3; /* HP to chassis */
if (tmp == 0)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5145b663ef6..987e3cf71a0 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -5630,6 +5630,7 @@ again:
switch (codec->vendor_id) {
case 0x111d76d1:
case 0x111d76d9:
+ case 0x111d76df:
case 0x111d76e5:
case 0x111d7666:
case 0x111d7667:
@@ -6573,6 +6574,7 @@ static const struct hda_codec_preset snd_hda_preset_sigmatel[] = {
{ .id = 0x111d76cc, .name = "92HD89F3", .patch = patch_stac92hd73xx },
{ .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx },
{ .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx },
+ { .id = 0x111d76df, .name = "92HD93BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c
index a118a0fb9d8..5956584ea3a 100644
--- a/sound/soc/blackfin/bf5xx-ad193x.c
+++ b/sound/soc/blackfin/bf5xx-ad193x.c
@@ -103,7 +103,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = {
.cpu_dai_name = "bfin-tdm.0",
.codec_dai_name ="ad193x-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad193x.5",
+ .codec_name = "spi0.5",
.ops = &bf5xx_ad193x_ops,
},
{
@@ -112,7 +112,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = {
.cpu_dai_name = "bfin-tdm.1",
.codec_dai_name ="ad193x-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad193x.5",
+ .codec_name = "spi0.5",
.ops = &bf5xx_ad193x_ops,
},
};
diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c
index 732a247f252..b94eb7ef7d1 100644
--- a/sound/soc/blackfin/bf5xx-ad73311.c
+++ b/sound/soc/blackfin/bf5xx-ad73311.c
@@ -128,7 +128,7 @@ static int snd_ad73311_configure(void)
return 0;
}
-static int bf5xx_probe(struct platform_device *pdev)
+static int bf5xx_probe(struct snd_soc_card *card)
{
int err;
if (gpio_request(GPIO_SE, "AD73311_SE")) {
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 84f4ad56855..9801cd7cfcb 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -431,7 +431,8 @@ static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai,
static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f;
+ u16 reg = snd_soc_read(codec, SSM2602_PWR);
+ reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN);
switch (level) {
case SND_SOC_BIAS_ON:
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index ffa2ffe5ec1..aa091a0d818 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1454,8 +1454,8 @@ static int wm8753_probe(struct snd_soc_codec *codec)
/* set the update bits */
snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
- snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
- snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LADC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RADC, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 1725550c293..d2c315fa1b9 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3479,31 +3479,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
}
EXPORT_SYMBOL_GPL(wm8962_mic_detect);
-#ifdef CONFIG_PM
-static int wm8962_resume(struct snd_soc_codec *codec)
-{
- u16 *reg_cache = codec->reg_cache;
- int i;
-
- /* Restore the registers */
- for (i = 1; i < codec->driver->reg_cache_size; i++) {
- switch (i) {
- case WM8962_SOFTWARE_RESET:
- continue;
- default:
- break;
- }
-
- if (reg_cache[i] != wm8962_reg[i])
- snd_soc_write(codec, i, reg_cache[i]);
- }
-
- return 0;
-}
-#else
-#define wm8962_resume NULL
-#endif
-
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
static int beep_rates[] = {
500, 1000, 2000, 4000,
@@ -4015,7 +3990,6 @@ static int wm8962_remove(struct snd_soc_codec *codec)
static struct snd_soc_codec_driver soc_codec_dev_wm8962 = {
.probe = wm8962_probe,
.remove = wm8962_remove,
- .resume = wm8962_resume,
.set_bias_level = wm8962_set_bias_level,
.reg_cache_size = WM8962_MAX_REGISTER + 1,
.reg_word_size = sizeof(u16),
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index fd0dc46afc3..5c6c2457386 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -369,7 +369,7 @@ static struct snd_soc_platform_driver mpc5200_audio_dma_platform = {
.pcm_free = &psc_dma_free,
};
-static int mpc5200_hpcd_probe(struct of_device *op)
+static int mpc5200_hpcd_probe(struct platform_device *op)
{
phys_addr_t fifo;
struct psc_dma *psc_dma;
@@ -487,7 +487,7 @@ out_unmap:
return ret;
}
-static int mpc5200_hpcd_remove(struct of_device *op)
+static int mpc5200_hpcd_remove(struct platform_device *op)
{
struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
@@ -519,7 +519,7 @@ MODULE_DEVICE_TABLE(of, mpc5200_hpcd_match);
static struct platform_driver mpc5200_hpcd_of_driver = {
.probe = mpc5200_hpcd_probe,
.remove = mpc5200_hpcd_remove,
- .dev = {
+ .driver = {
.owner = THIS_MODULE,
.name = "mpc5200-pcm-audio",
.of_match_table = mpc5200_hpcd_match,
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
index 309c59e6fb6..7945625e0e0 100644
--- a/sound/soc/imx/imx-pcm-fiq.c
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -240,7 +240,6 @@ static int ssi_irq = 0;
static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_card *card = rtd->card->snd_card;
struct snd_soc_dai *dai = rtd->cpu_dai;
struct snd_pcm *pcm = rtd->pcm;
int ret;
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index 8f16cd37c2a..d0bcf3fcea0 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -424,7 +424,7 @@ static __devinit int kirkwood_i2s_dev_probe(struct platform_device *pdev)
if (!priv->mem) {
dev_err(&pdev->dev, "request_mem_region failed\n");
err = -EBUSY;
- goto error_alloc;
+ goto err_alloc;
}
priv->io = ioremap(priv->mem->start, SZ_16K);
diff --git a/sound/soc/omap/mcpdm.c b/sound/soc/omap/mcpdm.c
index 928f0370745..50e59194ad8 100644
--- a/sound/soc/omap/mcpdm.c
+++ b/sound/soc/omap/mcpdm.c
@@ -449,7 +449,7 @@ exit:
return ret;
}
-int __devexit omap_mcpdm_remove(struct platform_device *pdev)
+int omap_mcpdm_remove(struct platform_device *pdev)
{
struct omap_mcpdm *mcpdm_ptr = platform_get_drvdata(pdev);
diff --git a/sound/soc/omap/mcpdm.h b/sound/soc/omap/mcpdm.h
index df3e16fb51f..20c20a8649f 100644
--- a/sound/soc/omap/mcpdm.h
+++ b/sound/soc/omap/mcpdm.h
@@ -150,4 +150,4 @@ extern int omap_mcpdm_request(void);
extern void omap_mcpdm_free(void);
extern int omap_mcpdm_set_offset(int offset1, int offset2);
int __devinit omap_mcpdm_probe(struct platform_device *pdev);
-int __devexit omap_mcpdm_remove(struct platform_device *pdev);
+int omap_mcpdm_remove(struct platform_device *pdev);
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index ebcc2d4d2b1..478d6077845 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int err = 0;
+ if (mcbsp_data->active)
+ if (freq == mcbsp_data->in_freq)
+ return 0;
+ else
+ return -EBUSY;
+
/* The McBSP signal muxing functions are only available on McBSP1 */
if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index b6445757fc5..2b8350b5223 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -196,20 +196,20 @@ static int zylonite_probe(struct snd_soc_card *card)
if (clk_pout) {
pout = clk_get(NULL, "CLK_POUT");
if (IS_ERR(pout)) {
- dev_err(&pdev->dev, "Unable to obtain CLK_POUT: %ld\n",
+ dev_err(card->dev, "Unable to obtain CLK_POUT: %ld\n",
PTR_ERR(pout));
return PTR_ERR(pout);
}
ret = clk_enable(pout);
if (ret != 0) {
- dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+ dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
ret);
clk_put(pout);
return ret;
}
- dev_dbg(&pdev->dev, "MCLK enabled at %luHz\n",
+ dev_dbg(card->dev, "MCLK enabled at %luHz\n",
clk_get_rate(pout));
}
@@ -241,7 +241,7 @@ static int zylonite_resume_pre(struct snd_soc_card *card)
if (clk_pout) {
ret = clk_enable(pout);
if (ret != 0)
- dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+ dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
ret);
}
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index d9f8aded51f..20b7f3b003a 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -203,14 +203,14 @@ static int snd_soc_rbtree_cache_sync(struct snd_soc_codec *codec)
rbnode = rb_entry(node, struct snd_soc_rbtree_node, node);
for (i = 0; i < rbnode->blklen; ++i) {
regtmp = rbnode->base_reg + i;
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, regtmp));
val = snd_soc_rbtree_get_register(rbnode, i);
def = snd_soc_get_cache_val(codec->reg_def_copy, i,
rbnode->word_size);
if (val == def)
continue;
+ WARN_ON(!snd_soc_codec_writable_register(codec, regtmp));
+
codec->cache_bypass = 1;
ret = snd_soc_write(codec, regtmp, val);
codec->cache_bypass = 0;
@@ -563,8 +563,7 @@ static int snd_soc_lzo_cache_sync(struct snd_soc_codec *codec)
lzo_blocks = codec->reg_cache;
for_each_set_bit(i, lzo_blocks[0]->sync_bmp, lzo_blocks[0]->sync_bmp_nbits) {
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, i));
+ WARN_ON(!snd_soc_codec_writable_register(codec, i));
ret = snd_soc_cache_read(codec, i, &val);
if (ret)
return ret;
@@ -823,8 +822,6 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec)
codec_drv = codec->driver;
for (i = 0; i < codec_drv->reg_cache_size; ++i) {
- WARN_ON(codec->writable_register &&
- codec->writable_register(codec, i));
ret = snd_soc_cache_read(codec, i, &val);
if (ret)
return ret;
@@ -832,6 +829,9 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec)
if (snd_soc_get_cache_val(codec->reg_def_copy,
i, codec_drv->reg_word_size) == val)
continue;
+
+ WARN_ON(!snd_soc_codec_writable_register(codec, i));
+
ret = snd_soc_write(codec, i, val);
if (ret)
return ret;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b085d8e8757..ef69f5a0270 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -30,6 +30,7 @@
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <linux/ctype.h>
#include <linux/slab.h>
#include <sound/ac97_codec.h>
#include <sound/core.h>
@@ -1434,9 +1435,20 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card)
"%s", card->name);
snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
"%s", card->long_name ? card->long_name : card->name);
- if (card->driver_name)
- strlcpy(card->snd_card->driver, card->driver_name,
- sizeof(card->snd_card->driver));
+ snprintf(card->snd_card->driver, sizeof(card->snd_card->driver),
+ "%s", card->driver_name ? card->driver_name : card->name);
+ for (i = 0; i < ARRAY_SIZE(card->snd_card->driver); i++) {
+ switch (card->snd_card->driver[i]) {
+ case '_':
+ case '-':
+ case '\0':
+ break;
+ default:
+ if (!isalnum(card->snd_card->driver[i]))
+ card->snd_card->driver[i] = '_';
+ break;
+ }
+ }
if (card->late_probe) {
ret = card->late_probe(card);
@@ -1633,7 +1645,7 @@ int snd_soc_codec_readable_register(struct snd_soc_codec *codec,
if (codec->readable_register)
return codec->readable_register(codec, reg);
else
- return 0;
+ return 1;
}
EXPORT_SYMBOL_GPL(snd_soc_codec_readable_register);
@@ -1651,7 +1663,7 @@ int snd_soc_codec_writable_register(struct snd_soc_codec *codec,
if (codec->writable_register)
return codec->writable_register(codec, reg);
else
- return 0;
+ return 1;
}
EXPORT_SYMBOL_GPL(snd_soc_codec_writable_register);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7e15914b363..d67c637557a 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2763,7 +2763,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend);
/**
* snd_soc_dapm_free - free dapm resources
- * @card: SoC device
+ * @dapm: DAPM context
*
* Free all dapm widgets and resources.
*/
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 38b00131b2f..fa31d9c2abd 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -105,7 +105,7 @@ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
snd_soc_dapm_sync(dapm);
- snd_jack_report(jack->jack, status);
+ snd_jack_report(jack->jack, jack->status);
out:
mutex_unlock(&codec->mutex);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 781d9e61adf..d8f2bf40145 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -530,8 +530,11 @@ snd_usb_audio_probe(struct usb_device *dev,
return chip;
__error:
- if (chip && !chip->num_interfaces)
- snd_card_free(chip->card);
+ if (chip) {
+ if (!chip->num_interfaces)
+ snd_card_free(chip->card);
+ chip->probing = 0;
+ }
mutex_unlock(&register_mutex);
__err_val:
return NULL;
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3b8f7b80376..e9d5c271db6 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -30,6 +30,8 @@ endif
# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
#
# Define NO_DWARF if you do not want debug-info analysis feature at all.
+#
+# Define WERROR=0 to disable treating any warnings as errors.
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
@@ -63,6 +65,11 @@ ifeq ($(ARCH),x86_64)
endif
endif
+# Treat warnings as errors unless directed not to
+ifneq ($(WERROR),0)
+ CFLAGS_WERROR := -Werror
+endif
+
#
# Include saner warnings here, which can catch bugs:
#
@@ -95,7 +102,7 @@ ifndef PERF_DEBUG
CFLAGS_OPTIMIZE = -O6
endif
-CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
+CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
EXTLIBS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
ALL_LDFLAGS = $(LDFLAGS)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 6b0519f885e..f4c3fbee4ba 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -161,6 +161,7 @@ static void config_attr(struct perf_evsel *evsel, struct perf_evlist *evlist)
struct perf_event_attr *attr = &evsel->attr;
int track = !evsel->idx; /* only the first counter needs these */
+ attr->disabled = 1;
attr->inherit = !no_inherit;
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING |
@@ -671,6 +672,8 @@ static int __cmd_record(int argc, const char **argv)
}
}
+ perf_evlist__enable(evsel_list);
+
/*
* Let the child rip
*/
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 55f4c76f282..efe696f936e 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -561,7 +561,7 @@ static int test__basic_mmap(void)
}
err = perf_event__parse_sample(event, attr.sample_type, sample_size,
- false, &sample);
+ false, &sample, false);
if (err) {
pr_err("Can't parse sample, err = %d\n", err);
goto out_munmap;
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index a43433f0830..d28013b7d61 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -191,7 +191,8 @@ static void __zero_source_counters(struct sym_entry *syme)
symbol__annotate_zero_histograms(sym);
}
-static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+static void record_precise_ip(struct sym_entry *syme, struct map *map,
+ int counter, u64 ip)
{
struct annotation *notes;
struct symbol *sym;
@@ -205,8 +206,8 @@ static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
if (pthread_mutex_trylock(&notes->lock))
return;
- ip = syme->map->map_ip(syme->map, ip);
- symbol__inc_addr_samples(sym, syme->map, counter, ip);
+ ip = map->map_ip(map, ip);
+ symbol__inc_addr_samples(sym, map, counter, ip);
pthread_mutex_unlock(&notes->lock);
}
@@ -810,7 +811,7 @@ static void perf_event__process_sample(const union perf_event *event,
evsel = perf_evlist__id2evsel(top.evlist, sample->id);
assert(evsel != NULL);
syme->count[evsel->idx]++;
- record_precise_ip(syme, evsel->idx, ip);
+ record_precise_ip(syme, al.map, evsel->idx, ip);
pthread_mutex_lock(&top.active_symbols_lock);
if (list_empty(&syme->node) || !syme->node.next) {
static bool first = true;
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 3c1b8a63210..437f8ca679a 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -169,12 +169,17 @@ static int perf_event__synthesize_mmap_events(union perf_event *event,
continue;
pbf += n + 3;
if (*pbf == 'x') { /* vm_exec */
+ char anonstr[] = "//anon\n";
char *execname = strchr(bf, '/');
/* Catch VDSO */
if (execname == NULL)
execname = strstr(bf, "[vdso]");
+ /* Catch anonymous mmaps */
+ if ((execname == NULL) && !strstr(bf, "["))
+ execname = anonstr;
+
if (execname == NULL)
continue;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 1d7f66488a8..357a85b8524 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -186,6 +186,6 @@ const char *perf_event__name(unsigned int id);
int perf_event__parse_sample(const union perf_event *event, u64 type,
int sample_size, bool sample_id_all,
- struct perf_sample *sample);
+ struct perf_sample *sample, bool swapped);
#endif /* __PERF_RECORD_H */
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index c12bd476c6f..72e9f4886b6 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -113,6 +113,19 @@ void perf_evlist__disable(struct perf_evlist *evlist)
}
}
+void perf_evlist__enable(struct perf_evlist *evlist)
+{
+ int cpu, thread;
+ struct perf_evsel *pos;
+
+ for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+ list_for_each_entry(pos, &evlist->entries, node) {
+ for (thread = 0; thread < evlist->threads->nr; thread++)
+ ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE);
+ }
+ }
+}
+
int perf_evlist__alloc_pollfd(struct perf_evlist *evlist)
{
int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries;
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index ce85ae9ae57..f3491500274 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -54,6 +54,7 @@ int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite);
void perf_evlist__munmap(struct perf_evlist *evlist);
void perf_evlist__disable(struct perf_evlist *evlist);
+void perf_evlist__enable(struct perf_evlist *evlist);
static inline void perf_evlist__set_maps(struct perf_evlist *evlist,
struct cpu_map *cpus,
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index a03a36b7908..e389815078d 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -7,6 +7,8 @@
* Released under the GPL v2. (and only v2, not any later version)
*/
+#include <byteswap.h>
+#include "asm/bug.h"
#include "evsel.h"
#include "evlist.h"
#include "util.h"
@@ -342,10 +344,20 @@ static bool sample_overlap(const union perf_event *event,
int perf_event__parse_sample(const union perf_event *event, u64 type,
int sample_size, bool sample_id_all,
- struct perf_sample *data)
+ struct perf_sample *data, bool swapped)
{
const u64 *array;
+ /*
+ * used for cross-endian analysis. See git commit 65014ab3
+ * for why this goofiness is needed.
+ */
+ union {
+ u64 val64;
+ u32 val32[2];
+ } u;
+
+
data->cpu = data->pid = data->tid = -1;
data->stream_id = data->id = data->time = -1ULL;
@@ -366,9 +378,16 @@ int perf_event__parse_sample(const union perf_event *event, u64 type,
}
if (type & PERF_SAMPLE_TID) {
- u32 *p = (u32 *)array;
- data->pid = p[0];
- data->tid = p[1];
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ u.val32[1] = bswap_32(u.val32[1]);
+ }
+
+ data->pid = u.val32[0];
+ data->tid = u.val32[1];
array++;
}
@@ -395,8 +414,15 @@ int perf_event__parse_sample(const union perf_event *event, u64 type,
}
if (type & PERF_SAMPLE_CPU) {
- u32 *p = (u32 *)array;
- data->cpu = *p;
+
+ u.val64 = *array;
+ if (swapped) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ }
+
+ data->cpu = u.val32[0];
array++;
}
@@ -423,18 +449,27 @@ int perf_event__parse_sample(const union perf_event *event, u64 type,
}
if (type & PERF_SAMPLE_RAW) {
- u32 *p = (u32 *)array;
+ const u64 *pdata;
+
+ u.val64 = *array;
+ if (WARN_ONCE(swapped,
+ "Endianness of raw data not corrected!\n")) {
+ /* undo swap of u64, then swap on individual u32s */
+ u.val64 = bswap_64(u.val64);
+ u.val32[0] = bswap_32(u.val32[0]);
+ u.val32[1] = bswap_32(u.val32[1]);
+ }
if (sample_overlap(event, array, sizeof(u32)))
return -EFAULT;
- data->raw_size = *p;
- p++;
+ data->raw_size = u.val32[0];
+ pdata = (void *) array + sizeof(u32);
- if (sample_overlap(event, p, data->raw_size))
+ if (sample_overlap(event, pdata, data->raw_size))
return -EFAULT;
- data->raw_data = p;
+ data->raw_data = (void *) pdata;
}
return 0;
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 555fc3864b9..5d732621a46 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -659,7 +659,7 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf)
if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die))
ret = -ENOENT;
}
- if (ret == 0)
+ if (ret >= 0)
ret = convert_variable(&vr_die, pf);
if (ret < 0)
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index cbc8f215d4b..7624324efad 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -803,7 +803,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist,
first = list_entry(evlist->entries.next, struct perf_evsel, node);
err = perf_event__parse_sample(event, first->attr.sample_type,
perf_evsel__sample_size(first),
- sample_id_all, &pevent->sample);
+ sample_id_all, &pevent->sample, false);
if (err)
return PyErr_Format(PyExc_OSError,
"perf: can't parse sample, err=%d", err);
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 170601e67d6..974d0cbee5e 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -162,7 +162,8 @@ static inline int perf_session__parse_sample(struct perf_session *session,
{
return perf_event__parse_sample(event, session->sample_type,
session->sample_size,
- session->sample_id_all, sample);
+ session->sample_id_all, sample,
+ session->header.needs_swap);
}
struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 401e220566f..1ee8f1e40f1 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -151,11 +151,17 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
{
u64 ip_l, ip_r;
+ if (!left->ms.sym && !right->ms.sym)
+ return right->level - left->level;
+
+ if (!left->ms.sym || !right->ms.sym)
+ return cmp_null(left->ms.sym, right->ms.sym);
+
if (left->ms.sym == right->ms.sym)
return 0;
- ip_l = left->ms.sym ? left->ms.sym->start : left->ip;
- ip_r = right->ms.sym ? right->ms.sym->start : right->ip;
+ ip_l = left->ms.sym->start;
+ ip_r = right->ms.sym->start;
return (int64_t)(ip_r - ip_l);
}
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 469c0264ed2..40eeaf07725 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -74,16 +74,104 @@ static void dso__set_sorted_by_name(struct dso *dso, enum map_type type)
bool symbol_type__is_a(char symbol_type, enum map_type map_type)
{
+ symbol_type = toupper(symbol_type);
+
switch (map_type) {
case MAP__FUNCTION:
return symbol_type == 'T' || symbol_type == 'W';
case MAP__VARIABLE:
- return symbol_type == 'D' || symbol_type == 'd';
+ return symbol_type == 'D';
default:
return false;
}
}
+static int prefix_underscores_count(const char *str)
+{
+ const char *tail = str;
+
+ while (*tail == '_')
+ tail++;
+
+ return tail - str;
+}
+
+#define SYMBOL_A 0
+#define SYMBOL_B 1
+
+static int choose_best_symbol(struct symbol *syma, struct symbol *symb)
+{
+ s64 a;
+ s64 b;
+
+ /* Prefer a symbol with non zero length */
+ a = syma->end - syma->start;
+ b = symb->end - symb->start;
+ if ((b == 0) && (a > 0))
+ return SYMBOL_A;
+ else if ((a == 0) && (b > 0))
+ return SYMBOL_B;
+
+ /* Prefer a non weak symbol over a weak one */
+ a = syma->binding == STB_WEAK;
+ b = symb->binding == STB_WEAK;
+ if (b && !a)
+ return SYMBOL_A;
+ if (a && !b)
+ return SYMBOL_B;
+
+ /* Prefer a global symbol over a non global one */
+ a = syma->binding == STB_GLOBAL;
+ b = symb->binding == STB_GLOBAL;
+ if (a && !b)
+ return SYMBOL_A;
+ if (b && !a)
+ return SYMBOL_B;
+
+ /* Prefer a symbol with less underscores */
+ a = prefix_underscores_count(syma->name);
+ b = prefix_underscores_count(symb->name);
+ if (b > a)
+ return SYMBOL_A;
+ else if (a > b)
+ return SYMBOL_B;
+
+ /* If all else fails, choose the symbol with the longest name */
+ if (strlen(syma->name) >= strlen(symb->name))
+ return SYMBOL_A;
+ else
+ return SYMBOL_B;
+}
+
+static void symbols__fixup_duplicate(struct rb_root *symbols)
+{
+ struct rb_node *nd;
+ struct symbol *curr, *next;
+
+ nd = rb_first(symbols);
+
+ while (nd) {
+ curr = rb_entry(nd, struct symbol, rb_node);
+again:
+ nd = rb_next(&curr->rb_node);
+ next = rb_entry(nd, struct symbol, rb_node);
+
+ if (!nd)
+ break;
+
+ if (curr->start != next->start)
+ continue;
+
+ if (choose_best_symbol(curr, next) == SYMBOL_A) {
+ rb_erase(&next->rb_node, symbols);
+ goto again;
+ } else {
+ nd = rb_next(&curr->rb_node);
+ rb_erase(&curr->rb_node, symbols);
+ }
+ }
+}
+
static void symbols__fixup_end(struct rb_root *symbols)
{
struct rb_node *nd, *prevnd = rb_first(symbols);
@@ -438,18 +526,11 @@ int kallsyms__parse(const char *filename, void *arg,
char *line = NULL;
size_t n;
int err = -1;
- u64 prev_start = 0;
- char prev_symbol_type = 0;
- char *prev_symbol_name;
FILE *file = fopen(filename, "r");
if (file == NULL)
goto out_failure;
- prev_symbol_name = malloc(KSYM_NAME_LEN);
- if (prev_symbol_name == NULL)
- goto out_close;
-
err = 0;
while (!feof(file)) {
@@ -470,7 +551,7 @@ int kallsyms__parse(const char *filename, void *arg,
if (len + 2 >= line_len)
continue;
- symbol_type = toupper(line[len]);
+ symbol_type = line[len];
len += 2;
symbol_name = line + len;
len = line_len - len;
@@ -480,24 +561,18 @@ int kallsyms__parse(const char *filename, void *arg,
break;
}
- if (prev_symbol_type) {
- u64 end = start;
- if (end != prev_start)
- --end;
- err = process_symbol(arg, prev_symbol_name,
- prev_symbol_type, prev_start, end);
- if (err)
- break;
- }
-
- memcpy(prev_symbol_name, symbol_name, len + 1);
- prev_symbol_type = symbol_type;
- prev_start = start;
+ /*
+ * module symbols are not sorted so we add all
+ * symbols with zero length and rely on
+ * symbols__fixup_end() to fix it up.
+ */
+ err = process_symbol(arg, symbol_name,
+ symbol_type, start, start);
+ if (err)
+ break;
}
- free(prev_symbol_name);
free(line);
-out_close:
fclose(file);
return err;
@@ -703,6 +778,9 @@ int dso__load_kallsyms(struct dso *dso, const char *filename,
if (dso__load_all_kallsyms(dso, filename, map) < 0)
return -1;
+ symbols__fixup_duplicate(&dso->symbols[map->type]);
+ symbols__fixup_end(&dso->symbols[map->type]);
+
if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
dso->symtab_type = SYMTAB__GUEST_KALLSYMS;
else
@@ -1092,8 +1170,7 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name,
if (dso->has_build_id) {
u8 build_id[BUILD_ID_SIZE];
- if (elf_read_build_id(elf, build_id,
- BUILD_ID_SIZE) != BUILD_ID_SIZE)
+ if (elf_read_build_id(elf, build_id, BUILD_ID_SIZE) < 0)
goto out_elf_end;
if (!dso__build_id_equal(dso, build_id))
@@ -1111,6 +1188,8 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name,
}
opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx);
+ if (opdshdr.sh_type != SHT_PROGBITS)
+ opdsec = NULL;
if (opdsec)
opddata = elf_rawdata(opdsec, NULL);
@@ -1276,6 +1355,7 @@ new_symbol:
* For misannotated, zeroed, ASM function sizes.
*/
if (nr > 0) {
+ symbols__fixup_duplicate(&dso->symbols[map->type]);
symbols__fixup_end(&dso->symbols[map->type]);
if (kmap) {
/*
@@ -1362,8 +1442,8 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size)
ptr = data->d_buf;
while (ptr < (data->d_buf + data->d_size)) {
GElf_Nhdr *nhdr = ptr;
- int namesz = NOTE_ALIGN(nhdr->n_namesz),
- descsz = NOTE_ALIGN(nhdr->n_descsz);
+ size_t namesz = NOTE_ALIGN(nhdr->n_namesz),
+ descsz = NOTE_ALIGN(nhdr->n_descsz);
const char *name;
ptr += sizeof(*nhdr);
@@ -1372,8 +1452,10 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size)
if (nhdr->n_type == NT_GNU_BUILD_ID &&
nhdr->n_namesz == sizeof("GNU")) {
if (memcmp(name, "GNU", sizeof("GNU")) == 0) {
- memcpy(bf, ptr, BUILD_ID_SIZE);
- err = BUILD_ID_SIZE;
+ size_t sz = min(size, descsz);
+ memcpy(bf, ptr, sz);
+ memset(bf + sz, 0, size - sz);
+ err = descsz;
break;
}
}
@@ -1425,7 +1507,7 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size)
while (1) {
char bf[BUFSIZ];
GElf_Nhdr nhdr;
- int namesz, descsz;
+ size_t namesz, descsz;
if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr))
break;
@@ -1434,15 +1516,16 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size)
descsz = NOTE_ALIGN(nhdr.n_descsz);
if (nhdr.n_type == NT_GNU_BUILD_ID &&
nhdr.n_namesz == sizeof("GNU")) {
- if (read(fd, bf, namesz) != namesz)
+ if (read(fd, bf, namesz) != (ssize_t)namesz)
break;
if (memcmp(bf, "GNU", sizeof("GNU")) == 0) {
- if (read(fd, build_id,
- BUILD_ID_SIZE) == BUILD_ID_SIZE) {
+ size_t sz = min(descsz, size);
+ if (read(fd, build_id, sz) == (ssize_t)sz) {
+ memset(build_id + sz, 0, size - sz);
err = 0;
break;
}
- } else if (read(fd, bf, descsz) != descsz)
+ } else if (read(fd, bf, descsz) != (ssize_t)descsz)
break;
} else {
int n = namesz + descsz;