diff options
71 files changed, 252 insertions, 152 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index e97a27856b2..4598a47aa0c 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -7,9 +7,9 @@ on-chip controllers onto these pads. Required Properties: - compatible: should be one of the following. - - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller. - - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller. - - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller. + - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. + - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. + - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. - reg: Base address of the pin controller hardware module and length of the address space it occupies. @@ -142,7 +142,7 @@ the following format 'pinctrl{n}' where n is a unique number for the alias. Example: A pin-controller node with pin banks: pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; @@ -185,7 +185,7 @@ Example: A pin-controller node with pin banks: Example 1: A pin-controller node with pin groups. pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; @@ -230,7 +230,7 @@ Example 1: A pin-controller node with pin groups. Example 2: A pin-controller node with external wakeup interrupt controller node. pinctrl_1: pinctrl@11000000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11000000 0x1000>; interrupts = <0 46 0> diff --git a/MAINTAINERS b/MAINTAINERS index f5b9851755a..22b754a8b4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1256,12 +1256,17 @@ M: Tony Prisk <linux@prisktech.co.nz> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-vt8500/ +F: drivers/clocksource/vt8500_timer.c +F: drivers/gpio/gpio-vt8500.c +F: drivers/mmc/host/wmt-sdmmc.c +F: drivers/pwm/pwm-vt8500.c +F: drivers/rtc/rtc-vt8500.c +F: drivers/tty/serial/vt8500_serial.c +F: drivers/usb/host/ehci-vt8500.c +F: drivers/usb/host/uhci-platform.c F: drivers/video/vt8500lcdfb.* F: drivers/video/wm8505fb* F: drivers/video/wmt_ge_rops.* -F: drivers/tty/serial/vt8500_serial.c -F: drivers/rtc/rtc-vt8500.c -F: drivers/mmc/host/wmt-sdmmc.c ARM/ZIPIT Z2 SUPPORT M: Marek Vasut <marek.vasut@gmail.com> @@ -1270,6 +1275,14 @@ S: Maintained F: arch/arm/mach-pxa/z2.c F: arch/arm/mach-pxa/include/mach/z2.h +ARM/ZYNQ ARCHITECTURE +M: Michal Simek <michal.simek@xilinx.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +W: http://wiki.xilinx.com +T: git git://git.xilinx.com/linux-xlnx.git +S: Supported +F: arch/arm/mach-zynq/ + ARM64 PORT (AARCH64 ARCHITECTURE) M: Catalin Marinas <catalin.marinas@arm.com> M: Will Deacon <will.deacon@arm.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f410cb16dd2..09238c83e6d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -260,7 +260,8 @@ config MMU # choice prompt "ARM system type" - default ARCH_MULTIPLATFORM + default ARCH_VERSATILE if !MMU + default ARCH_MULTIPLATFORM if MMU config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" @@ -1449,6 +1450,10 @@ config ISA_DMA bool select ISA_DMA_API +config ARCH_NO_VIRT_TO_BUS + def_bool y + depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK + # Select ISA DMA interface config ISA_DMA_API bool diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 80e29c605d4..4801717566d 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -324,8 +324,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; interrupts = <5 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -335,8 +333,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; interrupts = <6 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -346,8 +342,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; interrupts = <7 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -357,8 +351,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; interrupts = <8 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 8ecca6948d8..d112c3af8ce 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -197,9 +197,9 @@ }; usart3 { - pinctrl_uart3: usart3-0 { + pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC22 periph B with pullup */ + <2 22 0x2 0x1 /* PC22 periph B with pullup */ 2 23 0x2 0x0>; /* PC23 periph B */ }; @@ -402,8 +402,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; interrupts = <5 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -413,8 +411,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; interrupts = <6 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -424,8 +420,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; interrupts = <7 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 42eac1ff3cc..740630f9cd6 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -93,6 +93,7 @@ reg = <0xd0400 0x20>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <12>, <13>, <14>, <60>; }; @@ -103,6 +104,7 @@ reg = <0xd0420 0x20>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <61>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index e31bfc4a6f0..2feffc70814 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -48,13 +48,13 @@ }; pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; }; pinctrl_1: pinctrl@11000000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; @@ -66,7 +66,7 @@ }; pinctrl_2: pinctrl@03860000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x03860000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 8e6115adcd9..099cec79e2a 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -661,7 +661,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <3>; + samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 179a62e46c9..9a878069490 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,13 +37,13 @@ }; pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; }; pinctrl_1: pinctrl@11000000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; @@ -55,14 +55,14 @@ }; pinctrl_2: pinctrl@03860000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x03860000 0x1000>; interrupt-parent = <&combiner>; interrupts = <10 0>; }; pinctrl_3: pinctrl@106E0000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x106E0000 0x1000>; interrupts = <0 72 0>; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 024269de8ee..5f3562ad674 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -86,7 +86,7 @@ }; pinctrl { - compatible = "samsung,pinctrl-exynos5440"; + compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupt-controller; #interrupt-cells = <2>; @@ -154,6 +154,6 @@ rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; - interrupts = <0 16 0>, <0 17 0>; + interrupts = <0 17 0>, <0 16 0>; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d6265ca9711..ff1205ea571 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -866,7 +866,7 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; - clocks = <&clks 117>, <&clks 117>, <&clks 177>; + clocks = <&clks 117>, <&clks 117>, <&clks 190>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index a3d37ec2655..73187173117 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -70,7 +70,7 @@ compatible = "arm,sp805", "arm,primecell"; status = "disabled"; reg = <0 0x2b060000 0 0x1000>; - interrupts = <98>; + interrupts = <0 98 4>; clocks = <&oscclk7>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index cf8071ad22d..dfe371ec274 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -72,7 +72,7 @@ wdt@2a490000 { compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; - interrupts = <98>; + interrupts = <0 98 4>; clocks = <&oscclk6a>, <&oscclk6a>; clock-names = "wdogclk", "apb_pclk"; }; diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 728a43c446f..afb17d630d4 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -83,7 +83,6 @@ CONFIG_USB=y CONFIG_USB_RCAR_PHY=y CONFIG_MMC=y CONFIG_MMC_SDHI=y -CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index b5bc96cb65a..cbd91bce1ca 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -33,6 +33,8 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_MV64XXX=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index caa07db90cf..e319b2c56f1 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -73,7 +73,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 231dca60473..426270fe080 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -66,9 +66,9 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -CONFIG_POWER_SUPPLY=y -CONFIG_AB8500_BM=y -CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +# CONFIG_POWER_SUPPLY is not set +# CONFIG_AB8500_BM is not set +# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 5694a0d6576..58b8c6a0ab1 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -105,7 +105,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg); */ extern void __set_dma_addr(unsigned int chan, void *addr); #define set_dma_addr(chan, addr) \ - __set_dma_addr(chan, bus_to_virt(addr)) + __set_dma_addr(chan, (void *)__bus_to_virt(addr)) /* Set the DMA byte count for this channel * diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 64c770d2419..57870ab313c 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -245,6 +245,7 @@ static inline void *phys_to_virt(phys_addr_t x) #define __bus_to_pfn(x) __phys_to_pfn(x) #endif +#ifdef CONFIG_VIRT_TO_BUS static inline __deprecated unsigned long virt_to_bus(void *x) { return __virt_to_bus((unsigned long)x); @@ -254,6 +255,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x) { return (void *)__bus_to_virt(x); } +#endif /* * Conversion between a struct page and a physical address. diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 1a89824a5f7..0c7e3ad7ba9 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -299,6 +299,7 @@ void exynos4_restart(char mode, const char *cmd) void exynos5_restart(char mode, const char *cmd) { + struct device_node *np; u32 val; void __iomem *addr; @@ -306,8 +307,9 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { - val = (0x10 << 20) | (0x1 << 16); - addr = EXYNOS5440_SWRESET; + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + addr = of_iomap(np, 0) + 0xcc; + val = (0xfff << 20) | (0x1 << 16); } else { pr_err("%s: cannot support non-DT\n", __func__); return; @@ -1031,8 +1033,8 @@ static int __init exynos_init_irq_eint(void) * interrupt support code here can be completely removed. */ static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,pinctrl-exynos4210", }, - { .compatible = "samsung,pinctrl-exynos4x12", }, + { .compatible = "samsung,exynos4210-pinctrl", }, + { .compatible = "samsung,exynos4x12-pinctrl", }, }; struct device_node *pctrl_np, *wkup_np; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index b9b539cac81..5106ab83e59 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -91,8 +91,8 @@ static int exynos_cpu_suspend(unsigned long arg) /* issue the standby signal into the pm unit. */ cpu_do_idle(); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void exynos_pm_prepare(void) @@ -282,6 +282,8 @@ static void exynos_pm_resume(void) if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { tmp |= S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + /* clear the wakeup state register */ + __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ goto early_wakeup; } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0a2349dc701..64b40a4615b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -488,7 +488,7 @@ config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 + depends on REGULATOR_WM8350 = y select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 2c570cdaae7..69858c78f40 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -224,6 +224,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk_prepare_enable(clk[emi_ahb]); + /* Clock source for gpt must be derived from AHB */ + clk_set_parent(clk[per5_sel], clk[ahb]); + clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 1ffe3b534e5..e30369a58e4 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -228,9 +228,12 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2"); clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2"); - clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0"); - clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1"); - clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0"); + clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1"); + clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2"); + clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2"); clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 79197d8b34a..72516658be1 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,10 +1,5 @@ #include <linux/amba/serial.h> -#ifdef CONFIG_ARCH_INTEGRATOR_AP extern struct amba_pl010_data ap_uart_data; -#else -/* Not used without Integrator/AP support anyway */ -struct amba_pl010_data ap_uart_data {}; -#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 39c060f75e4..81461d21871 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -71,7 +71,7 @@ int __init integrator_init(bool is_cp) * hard-code them. The Integator/CP and forward have proper cell IDs. * Else we leave them undefined to the bus driver can autoprobe them. */ - if (!is_cp) { + if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) { rtc_device.periphid = 0x00041030; uart0_device.periphid = 0x00041010; uart1_device.periphid = 0x00041010; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 11e2a414580..592c168f4b6 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -94,7 +94,7 @@ void __iomem *ap_syscon_base; * f1b00000 1b000000 GPIO */ -static struct map_desc ap_io_desc[] __initdata = { +static struct map_desc ap_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), @@ -613,7 +613,6 @@ static struct map_desc ap_io_desc_atag[] __initdata = { static void __init ap_map_io_atag(void) { iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); - ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); ap_map_io(); } @@ -685,6 +684,7 @@ static void __init ap_init(void) platform_device_register(&cfi_flash_device); + ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 7322838c044..01a888d7b0b 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -78,7 +78,7 @@ static void __iomem *intcp_con_base; * fcb00000 cb000000 CP system control */ -static struct map_desc intcp_io_desc[] __initdata = { +static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h index 12da4cacd4a..e8d043a0e99 100644 --- a/arch/arm/mach-msm/proc_comm.h +++ b/arch/arm/mach-msm/proc_comm.h @@ -253,6 +253,6 @@ enum { (((drvstr) & 0xF) << 17)) int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); -void __init proc_comm_boot_wait(void); +void proc_comm_boot_wait(void); #endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 99df4df680f..da93bcbc74c 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -3,7 +3,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a -obj-y += system-controller.o -obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o +obj-y += system-controller.o +obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o +obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 5d3b4f4f81a..8633a43acae 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; -static DEFINE_SPINLOCK(wakeupgen_lock); +static DEFINE_RAW_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; @@ -134,9 +134,9 @@ static void wakeupgen_mask(struct irq_data *d) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]); - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } /* @@ -146,9 +146,9 @@ static void wakeupgen_unmask(struct irq_data *d) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_set(d->irq, irq_target_cpu[d->irq]); - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } #ifdef CONFIG_HOTPLUG_CPU @@ -189,7 +189,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); if (set) { _wakeupgen_save_masks(cpu); _wakeupgen_set_all(cpu, WKG_MASK_ALL); @@ -197,7 +197,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) _wakeupgen_set_all(cpu, WKG_UNMASK_ALL); _wakeupgen_restore_masks(cpu); } - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } #endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b8ad6e632bb..265de51b43d 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -228,7 +228,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int r = 0; if (of_have_populated_dt()) { - np = omap_get_timer_dt(omap_timer_match, NULL); + np = omap_get_timer_dt(omap_timer_match, property); if (!np) return -ENODEV; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index e49b40b4c90..6a7aec6d117 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -23,6 +23,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/gpio.h> +#include <linux/string.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -56,7 +57,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, struct twl4030_platform_data *pmic_data) { omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - strncpy(pmic_i2c_board_info.type, pmic_type, + strlcpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; pmic_i2c_board_info.platform_data = pmic_data; diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h index 2d3f14e3be2..714b6574393 100644 --- a/arch/arm/mach-pxa/include/mach/palmtreo.h +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -38,13 +38,14 @@ #define GPIO_NR_TREO_LCD_POWER 25 /* Treo680 specific GPIOs */ -#ifdef CONFIG_MACH_TREO680 #define GPIO_NR_TREO680_SD_READONLY 33 #define GPIO_NR_TREO680_SD_POWER 42 #define GPIO_NR_TREO680_VIBRATE_EN 44 #define GPIO_NR_TREO680_KEYB_BL 24 #define GPIO_NR_TREO680_BT_EN 43 -#endif /* CONFIG_MACH_TREO680 */ +#define GPIO_NR_TREO680_LCD_POWER 77 +#define GPIO_NR_TREO680_LCD_EN 86 +#define GPIO_NR_TREO680_LCD_EN_N 25 /* Centro685 specific GPIOs */ #define GPIO_NR_CENTRO_SD_POWER 21 diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index b7de471b273..b802f285fe0 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -37,6 +37,7 @@ #define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */ #define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */ #define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */ +#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */ /* * More handy macros for PCMCIA diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 3f3c48f2f7c..577512845a6 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -98,9 +98,6 @@ static unsigned long treo_pin_config[] __initdata = { GPIO96_KP_MKOUT_6, GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - /* Quick Capture Interface */ GPIO84_CIF_FV, GPIO85_CIF_LV, @@ -140,6 +137,12 @@ static unsigned long treo680_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, GPIO99_KP_MKIN_5, + + /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */ + GPIOxx_LCD_16BPP, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, }; #endif /* CONFIG_MACH_TREO680 */ @@ -155,6 +158,9 @@ static unsigned long centro685_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0, GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, }; #endif /* CONFIG_MACH_CENTRO */ @@ -328,7 +334,6 @@ static inline void palmtreo_uhc_init(void) {} /****************************************************************************** * Vibra and LEDs ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 static struct gpio_led treo680_gpio_leds[] = { { .name = "treo680:vibra:vibra", @@ -379,21 +384,17 @@ static struct gpio_led_platform_data centro_gpio_led_info = { static struct platform_device palmtreo_leds = { .name = "leds-gpio", .id = -1, - .dev = { - .platform_data = &treo680_gpio_led_info, - } }; static void __init palmtreo_leds_init(void) { if (machine_is_centro()) palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info; + else if (machine_is_treo680()) + palmtreo_leds.dev.platform_data = &treo680_gpio_led_info; platform_device_register(&palmtreo_leds); } -#else -static inline void palmtreo_leds_init(void) {} -#endif /****************************************************************************** * Machine init @@ -424,10 +425,59 @@ static void __init palmphone_common_init(void) } #ifdef CONFIG_MACH_TREO680 +void __init treo680_gpio_init(void) +{ + unsigned int gpio; + + /* drive all three lcd gpios high initially */ + const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT; + + /* + * LCD GPIO initialization... + */ + + /* + * This is likely the power to the lcd. Toggling it low/high appears to + * turn the lcd off/on. Can be toggled after lcd is initialized without + * any apparent adverse effects to the lcd operation. Note that this + * gpio line is used by the lcd controller as the L_BIAS signal, but + * treo680 configures it as gpio. + */ + gpio = GPIO_NR_TREO680_LCD_POWER; + if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0) + goto fail; + + /* + * These two are called "enables", for lack of a better understanding. + * If either of these are toggled after the lcd is initialized, the + * image becomes degraded. N.B. The IPL shipped with the treo + * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If + * the IPL is ever reprogrammed, this initialization may be need to be + * revisited. + */ + gpio = GPIO_NR_TREO680_LCD_EN; + if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0) + goto fail; + gpio = GPIO_NR_TREO680_LCD_EN_N; + if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0) + goto fail; + + /* driving this low turns LCD on */ + gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0); + + return; + fail: + pr_err("gpio %d initialization failed\n", gpio); + gpio_free(GPIO_NR_TREO680_LCD_POWER); + gpio_free(GPIO_NR_TREO680_LCD_EN); + gpio_free(GPIO_NR_TREO680_LCD_EN_N); +} + static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); palmphone_common_init(); + treo680_gpio_init(); palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); } diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 79923058d10..f38aa890b2c 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); + /* CSMSADRCFG wakes up in its default state (0), so we need to set it */ + __raw_writel(0x2, CSMSADRCFG); } static struct syscore_ops smemc_syscore_ops = { @@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = { static int __init smemc_init(void) { - if (cpu_is_pxa3xx()) + if (cpu_is_pxa3xx()) { + /* + * The only documentation we have on the + * Chip Select Configuration Register (CSMSADRCFG) is that + * it must be programmed to 0x2. + * Moreover, in the bit definitions, the second bit + * (CSMSADRCFG[1]) is called "SETALWAYS". + * Other bits are reserved in this register. + */ + __raw_writel(0x2, CSMSADRCFG); + register_syscore_ops(&smemc_syscore_ops); + } return 0; } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2073f0e6db0..7e2cb880daa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -732,7 +732,7 @@ static inline void spitz_lcd_init(void) {} #endif /****************************************************************************** - * Framebuffer + * NAND Flash ******************************************************************************/ #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) static struct mtd_partition spitz_nand_partitions[] = { @@ -858,7 +858,7 @@ static inline void spitz_nor_init(void) {} #endif /****************************************************************************** - * GPIO expander + * I2C devices ******************************************************************************/ #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) static struct pca953x_platform_data akita_pca953x_pdata = { diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 3445c4f4234..7079a70b1ab 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -226,6 +226,7 @@ config MACH_QT2410 config ARCH_SMDK2410 bool "SMDK2410/A9M2410" select S3C24XX_SMDK + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2410 or the derived module A9M2410 <http://www.fsforth.de> @@ -273,6 +274,7 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2412 power management diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index aeb4a24ff3e..f6b9f2ef01b 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -132,7 +132,7 @@ static struct clk *clk_msysclk_sources[] = { [3] = &clk_mpllref, }; -struct clksrc_clk clk_msysclk = { +static struct clksrc_clk clk_msysclk = { .clk = { .name = "msysclk", .parent = &clk_xtal, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 0c9e9a785ef..6bcf87f65f9 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -197,7 +197,7 @@ static unsigned long s3c24xx_read_idcode_v4(void) static void s3c24xx_default_idle(void) { - unsigned long tmp; + unsigned long tmp = 0; int i; /* idle the system by using the idle mode which will wait for an diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 4135de87d1f..13ed33c6911 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -40,17 +40,17 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL .endm .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2410_UFSTAT_TXFULL .endm @@ -68,18 +68,18 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S index 7615a14773f..6a21beeba1d 100644 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S @@ -31,10 +31,10 @@ @@ try the interrupt offset register, since it is there - ldr \irqstat, [ \base, #INTPND ] + ldr \irqstat, [\base, #INTPND ] teq \irqstat, #0 beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] + ldr \irqnr, [\base, #INTOFFSET ] mov \tmp, #1 tst \irqstat, \tmp, lsl \irqnr bne 1001f diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index bb36d832bd3..c52100ef232 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/i2c/tps65010.h> diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2db9f4..6183a688012 100644 --- a/arch/arm/mach-s3c24xx/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S @@ -30,4 +30,4 @@ h1940_pm_return: mov r0, #S3C2410_PA_GPIO - ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ] + ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO] diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index c60f67a75af..f5dc2b254a5 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -48,7 +48,8 @@ static int s3c2412_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s3c2412_pm_prepare(void) diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 1bd4817b8eb..1a9e8dd194f 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2416.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c @@ -34,7 +34,8 @@ static int s3c2416_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b6388a5a..65200ae72c9 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend) ldr r4, =S3C2410_REFRESH ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + ldr r7, [r4] @ get REFRESH (and ensure in TLB) + ldr r8, [r5] @ get MISCCR (and ensure in TLB) + ldr r9, [r6] @ get CLKCON (and ensure in TLB) orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals @@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend) @@ align next bit of code to cache line .align 5 s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep + streq r7, [r4] @ SDRAM sleep command + streq r8, [r5] @ SDRAM power-down config + streq r9, [r6] @ CPU sleep 1: beq 1b mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418ed714..5adaceb7da1 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -57,12 +57,12 @@ s3c2412_sleep_enter1: * retry, as simply returning causes the system to lock. */ - ldrne r9, [ r1 ] - strne r9, [ r1 ] - ldrne r9, [ r2 ] - strne r9, [ r2 ] - ldrne r9, [ r3 ] - strne r9, [ r3 ] + ldrne r9, [r1] + strne r9, [r1] + ldrne r9, [r2] + strne r9, [r2] + ldrne r9, [r3] + strne r9, [r3] bne s3c2412_sleep_enter1 mov pc, r14 diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index d2e1a16690b..ce849906322 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -296,7 +296,8 @@ static int s3c64xx_cpu_suspend(unsigned long arg) /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } /* mapping of interrupts to parts of the wakeup mask */ diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 9cba18bfe47..97c2a08ad49 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -103,8 +103,8 @@ static int s5p64x0_cpu_suspend(unsigned long arg) "mcr p15, 0, %0, c7, c10, 4\n\t" "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp)); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } /* mapping of interrupts to parts of the wakeup mask */ diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h index 08ff2fda1fb..ef977ea8546 100644 --- a/arch/arm/mach-s5pv210/include/mach/uncompress.h +++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h @@ -19,6 +19,8 @@ static void arch_detect_cpu(void) { /* we do not need to do any cpu detection here at the moment. */ + fifo_mask = S5PV210_UFSTAT_TXMASK; + fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT; } #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 736bfb103cb..2b68a67b6e9 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -104,8 +104,8 @@ static int s5pv210_cpu_suspend(unsigned long arg) "mcr p15, 0, %0, c7, c10, 4\n\t" "wfi" : : "r" (tmp)); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s5pv210_pm_prepare(void) diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index f69f78fc3dd..bca7e60b24d 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,9 +24,6 @@ #include "generic.h" - -#warning "include/asm/arch-sa1100/ide.h needs fixing for lart" - static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 721e7b4275f..d4dcec53171 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -71,13 +71,11 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) db8500_prcmu_early_init(); - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) u8500_clk_init(); - else if (cpu_is_u9540()) - u9540_clk_init(); else if (cpu_is_u8540()) u8540_clk_init(); } diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index b54884bd254..ce9149302cc 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -40,8 +40,10 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev, goto wfi; /* decouple the gic from the A9 cores */ - if (prcmu_gic_decouple()) + if (prcmu_gic_decouple()) { + spin_unlock(&master_lock); goto out; + } /* If an error occur, we will have to recouple the gic * manually */ diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 63d8e9f81b9..1dba3688275 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -25,4 +25,9 @@ config MACH_VERSATILE_DT Include support for the ARM(R) Versatile/PB platform, using the device tree for discovery +config MACH_VERSATILE_AUTO + def_bool y + depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB + select MACH_VERSATILE_DT + endmenu diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a78827b7027..43478c299cc 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -127,7 +127,7 @@ void __init versatile_init_irq(void) writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE); } -static struct map_desc versatile_io_desc[] __initdata = { +static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S index e286daca682..0ff612ac95b 100644 --- a/arch/arm/mach-w90x900/include/mach/entry-macro.S +++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S @@ -19,8 +19,8 @@ mov \base, #AIC_BA - ldr \irqnr, [ \base, #AIC_IPER] - ldr \irqnr, [ \base, #AIC_ISNR] + ldr \irqnr, [\base, #AIC_IPER] + ldr \irqnr, [\base, #AIC_ISNR] cmp \irqnr, #0 .endm diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 4136b20cba3..e06c34bdc34 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2019,7 +2019,7 @@ static int omap_system_dma_probe(struct platform_device *pdev) errata = p->errata; if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels - && (omap_dma_reserve_channels <= dma_lch_count)) + && (omap_dma_reserve_channels < d->lch_count)) d->lch_count = omap_dma_reserve_channels; dma_lch_count = d->lch_count; diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index e686fe76a96..7310bcfb299 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -49,7 +49,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, "number (%u)\n", num); continue; } - if (variant_mask & !(*mpp_list & variant_mask)) { + if (variant_mask && !(*mpp_list & variant_mask)) { printk(KERN_WARNING "orion_mpp_conf: requested MPP%u config " "unavailable on this hardware\n", num); diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index 207e275362a..f3a9cff6d5d 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -14,12 +14,12 @@ /* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S5PV210_UFSTAT_TXMASK .endm .macro fifo_full_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S5PV210_UFSTAT_TXFULL .endm @@ -27,7 +27,7 @@ * most widely re-used */ .macro fifo_level_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm @@ -36,7 +36,7 @@ #endif .macro fifo_full_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2440_UFSTAT_TXFULL .endm @@ -45,11 +45,11 @@ #endif .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] + strb \rd, [\rx, # S3C2410_UTXH] .endm .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -60,7 +60,7 @@ 1001: @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b @@ -68,7 +68,7 @@ .endm .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -79,7 +79,7 @@ b 1002f 1001: @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h index 945a99d5956..1d6cb2b8b09 100644 --- a/arch/arm/plat-samsung/include/plat/fimc-core.h +++ b/arch/arm/plat-samsung/include/plat/fimc-core.h @@ -43,6 +43,8 @@ static inline void s3c_fimc_setname(int id, char *name) s5p_device_fimc3.name = name; break; #endif + default: + break; } } diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 151cc9195cf..9b87f38fc4f 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -374,6 +374,8 @@ static inline void s3c_sdhci_setname(int id, char *name) s3c_device_hsmmc3.name = name; break; #endif + default: + break; } } diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 15070284343..002b1472293 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -51,7 +51,7 @@ void s3c_pm_dbg(const char *fmt, ...) char buff[256]; va_start(va, fmt); - vsprintf(buff, fmt, va); + vsnprintf(buff, sizeof(buff), fmt, va); va_end(va); printascii(buff); @@ -243,6 +243,7 @@ int (*pm_cpu_sleep)(unsigned long); static int s3c_pm_enter(suspend_state_t state) { + int ret; /* ensure the debug is initialised (if enabled) */ s3c_pm_debug_init(); @@ -300,7 +301,9 @@ static int s3c_pm_enter(suspend_state_t state) * we resume as it saves its own register state and restores it * during the resume. */ - cpu_suspend(0, pm_cpu_sleep); + ret = cpu_suspend(0, pm_cpu_sleep); + if (ret) + return ret; /* restore the system state */ diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 87dbd81bdf5..739d016eb27 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,6 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" + select ARCH_HAVE_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 76be7eed79d..b2016ed941a 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3023,9 +3023,9 @@ static __init int samsung_gpiolib_init(void) */ struct device_node *pctrl_np; static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,pinctrl-exynos4210", }, - { .compatible = "samsung,pinctrl-exynos4x12", }, - { .compatible = "samsung,pinctrl-exynos5440", }, + { .compatible = "samsung,exynos4210-pinctrl", }, + { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5440-pinctrl", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) if (pctrl_np && of_device_is_available(pctrl_np)) diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 77048b18439..558c2928f26 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -313,7 +313,7 @@ static void vexpress_sysreg_config_complete(unsigned long data) } -void __init vexpress_sysreg_setup(struct device_node *node) +void vexpress_sysreg_setup(struct device_node *node) { if (WARN_ON(!vexpress_sysreg_base)) return; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 5f8441ef59c..f206df17565 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -944,9 +944,9 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) } static const struct of_device_id samsung_pinctrl_dt_match[] = { - { .compatible = "samsung,pinctrl-exynos4210", + { .compatible = "samsung,exynos4210-pinctrl", .data = (void *)exynos4210_pin_ctrl }, - { .compatible = "samsung,pinctrl-exynos4x12", + { .compatible = "samsung,exynos4x12-pinctrl", .data = (void *)exynos4x12_pin_ctrl }, {}, }; diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h index 51d52e767a1..2a50048c1c4 100644 --- a/include/linux/platform_data/i2c-s3c2410.h +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -15,6 +15,8 @@ #define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ +struct platform_device; + /** * struct s3c2410_platform_i2c - Platform data for s3c I2C. * @bus_num: The bus number to use (if possible). diff --git a/scripts/sortextable.h b/scripts/sortextable.h index e4fd45b7e45..f5eb43d4292 100644 --- a/scripts/sortextable.h +++ b/scripts/sortextable.h @@ -182,7 +182,7 @@ do_func(Elf_Ehdr *ehdr, char const *const fname, table_sort_t custom_sort) _r(&sort_needed_sym->st_value) - _r(&sort_needed_sec->sh_addr); -#if 1 +#if 0 printf("sort done marker at %lx\n", (unsigned long)((char *)sort_done_location - (char *)ehdr)); #endif |