diff options
| -rw-r--r-- | drivers/net/wireless/brcm80211/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/Makefile | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/led.c | 126 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/led.h | 36 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h | 4 |
6 files changed, 177 insertions, 2 deletions
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index 1d92d874ebb..747e9317dab 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -12,8 +12,9 @@ config BRCMSMAC select CORDIC ---help--- This module adds support for PCIe wireless adapters based on Broadcom - IEEE802.11n SoftMAC chipsets. If you choose to build a module, it'll - be called brcmsmac.ko. + IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will + be available if you select BCMA_DRIVER_GPIO. If you choose to build a + module, the driver will be called brcmsmac.ko. config BRCMFMAC tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver" diff --git a/drivers/net/wireless/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/brcm80211/brcmsmac/Makefile index d3d4151c3ed..cba19d839b7 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile +++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile @@ -43,6 +43,10 @@ BRCMSMAC_OFILES := \ brcms_trace_events.o \ debug.o +ifdef CONFIG_BCMA_DRIVER_GPIO +BRCMSMAC_OFILES += led.o +endif + MODULEPFX := brcmsmac obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o diff --git a/drivers/net/wireless/brcm80211/brcmsmac/led.c b/drivers/net/wireless/brcm80211/brcmsmac/led.c new file mode 100644 index 00000000000..74b17cecb18 --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmsmac/led.c @@ -0,0 +1,126 @@ +#include <net/mac80211.h> +#include <linux/bcma/bcma_driver_chipcommon.h> +#include <linux/gpio.h> + +#include "mac80211_if.h" +#include "pub.h" +#include "main.h" +#include "led.h" + + /* number of leds */ +#define BRCMS_LED_NO 4 + /* behavior mask */ +#define BRCMS_LED_BEH_MASK 0x7f + /* activelow (polarity) bit */ +#define BRCMS_LED_AL_MASK 0x80 + /* radio enabled */ +#define BRCMS_LED_RADIO 3 + +static void brcms_radio_led_ctrl(struct brcms_info *wl, bool state) +{ + if (wl->radio_led.gpio == -1) + return; + + if (wl->radio_led.active_low) + state = !state; + + if (state) + gpio_set_value(wl->radio_led.gpio, 1); + else + gpio_set_value(wl->radio_led.gpio, 0); +} + + +/* Callback from the LED subsystem. */ +static void brcms_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct brcms_info *wl = container_of(led_dev, + struct brcms_info, led_dev); + brcms_radio_led_ctrl(wl, brightness); +} + +void brcms_led_unregister(struct brcms_info *wl) +{ + if (wl->led_dev.dev) + led_classdev_unregister(&wl->led_dev); + if (wl->radio_led.gpio != -1) + gpio_free(wl->radio_led.gpio); +} + +int brcms_led_register(struct brcms_info *wl) +{ + int i, err; + struct brcms_led *radio_led = &wl->radio_led; + /* get CC core */ + struct bcma_drv_cc *cc_drv = &wl->wlc->hw->d11core->bus->drv_cc; + struct gpio_chip *bcma_gpio = &cc_drv->gpio; + struct ssb_sprom *sprom = &wl->wlc->hw->d11core->bus->sprom; + u8 *leds[] = { &sprom->gpio0, + &sprom->gpio1, + &sprom->gpio2, + &sprom->gpio3 }; + unsigned gpio = -1; + bool active_low = false; + + /* none by default */ + radio_led->gpio = -1; + radio_led->active_low = false; + + if (!bcma_gpio || !gpio_is_valid(bcma_gpio->base)) + return -ENODEV; + + /* find radio enabled LED */ + for (i = 0; i < BRCMS_LED_NO; i++) { + u8 led = *leds[i]; + if ((led & BRCMS_LED_BEH_MASK) == BRCMS_LED_RADIO) { + gpio = bcma_gpio->base + i; + if (led & BRCMS_LED_AL_MASK) + active_low = true; + break; + } + } + + if (gpio == -1 || !gpio_is_valid(gpio)) + return -ENODEV; + + /* request and configure LED gpio */ + err = gpio_request_one(gpio, + active_low ? GPIOF_OUT_INIT_HIGH + : GPIOF_OUT_INIT_LOW, + "radio on"); + if (err) { + wiphy_err(wl->wiphy, "requesting led gpio %d failed (err: %d)\n", + gpio, err); + return err; + } + err = gpio_direction_output(gpio, 1); + if (err) { + wiphy_err(wl->wiphy, "cannot set led gpio %d to output (err: %d)\n", + gpio, err); + return err; + } + + snprintf(wl->radio_led.name, sizeof(wl->radio_led.name), + "brcmsmac-%s:radio", wiphy_name(wl->wiphy)); + + wl->led_dev.name = wl->radio_led.name; + wl->led_dev.default_trigger = + ieee80211_get_radio_led_name(wl->pub->ieee_hw); + wl->led_dev.brightness_set = brcms_led_brightness_set; + err = led_classdev_register(wiphy_dev(wl->wiphy), &wl->led_dev); + + if (err) { + wiphy_err(wl->wiphy, "cannot register led device: %s (err: %d)\n", + wl->radio_led.name, err); + return err; + } + + wiphy_info(wl->wiphy, "registered radio enabled led device: %s gpio: %d\n", + wl->radio_led.name, + gpio); + radio_led->gpio = gpio; + radio_led->active_low = active_low; + + return 0; +} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/led.h b/drivers/net/wireless/brcm80211/brcmsmac/led.h new file mode 100644 index 00000000000..17a0b1f5dbc --- /dev/null +++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2012 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _BRCM_LED_H_ +#define _BRCM_LED_H_ +struct brcms_led { + char name[32]; + unsigned gpio; + bool active_low; +}; + +#ifdef CONFIG_BCMA_DRIVER_GPIO +void brcms_led_unregister(struct brcms_info *wl); +int brcms_led_register(struct brcms_info *wl); +#else +static inline void brcms_led_unregister(struct brcms_info *wl) {}; +static inline int brcms_led_register(struct brcms_info *wl) +{ + return -ENOTSUPP; +}; +#endif + +#endif /* _BRCM_LED_H_ */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index c6451c61407..c70cf7b654c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -34,6 +34,7 @@ #include "mac80211_if.h" #include "main.h" #include "debug.h" +#include "led.h" #define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */ #define BRCMS_FLUSH_TIMEOUT 500 /* msec */ @@ -904,6 +905,7 @@ static void brcms_remove(struct bcma_device *pdev) struct brcms_info *wl = hw->priv; if (wl->wlc) { + brcms_led_unregister(wl); wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false); wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); ieee80211_unregister_hw(hw); @@ -1151,6 +1153,8 @@ static int brcms_bcma_probe(struct bcma_device *pdev) pr_err("%s: brcms_attach failed!\n", __func__); return -ENODEV; } + brcms_led_register(wl); + return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h index 947ccacf43e..4090032e81a 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h @@ -20,8 +20,10 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/workqueue.h> +#include <linux/leds.h> #include "ucode_loader.h" +#include "led.h" /* * Starting index for 5G rates in the * legacy rate table. @@ -81,6 +83,8 @@ struct brcms_info { struct wiphy *wiphy; struct brcms_ucode ucode; bool mute_tx; + struct brcms_led radio_led; + struct led_classdev led_dev; }; /* misc callbacks */ |