diff options
105 files changed, 11761 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3473f8b8ede..fee7c64ca72 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -298,6 +298,19 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors +config ARCH_STMP3XXX + bool "Freescale STMP3xxx" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select USB_ARCH_HAS_EHCI + help + Support for systems based on the Freescale 3xxx CPUs. + config ARCH_NETX bool "Hilscher NetX based" select CPU_ARM926T @@ -673,6 +686,8 @@ source "arch/arm/mach-s3c6400/Kconfig" source "arch/arm/mach-s3c6410/Kconfig" endif +source "arch/arm/plat-stmp3xxx/Kconfig" + source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-h720x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0c25f2cb73a..2f3cac809e3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -152,6 +152,8 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark +machine-$(CONFIG_ARCH_STMP378X) := stmp378x +machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge @@ -165,6 +167,7 @@ plat-$(CONFIG_PLAT_ORION) := orion plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c +plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig new file mode 100644 index 00000000000..44461f197a1 --- /dev/null +++ b/arch/arm/configs/stmp378x_defconfig @@ -0,0 +1,1141 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 02:44:13 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set +# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +# CONFIG_ARCH_STMP37XX is not set +CONFIG_ARCH_STMP378X=y +# CONFIG_MACH_STMP37XX is not set +CONFIG_MACH_STMP378X=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_OBJECTS=y +CONFIG_DEBUG_OBJECTS_SELFTEST=y +CONFIG_DEBUG_OBJECTS_FREE=y +CONFIG_DEBUG_OBJECTS_TIMERS=y +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SLAB_LEAK=y +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +CONFIG_DEBUG_KOBJECT=y +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_EVENT_TRACER is not set +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig new file mode 100644 index 00000000000..401279d531d --- /dev/null +++ b/arch/arm/configs/stmp37xx_defconfig @@ -0,0 +1,1002 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29.1 +# Mon Apr 20 04:41:26 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-default" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_STMP3XXX=y + +# +# Freescale STMP3xxx implementations +# +CONFIG_ARCH_STMP37XX=y +# CONFIG_ARCH_STMP378X is not set +CONFIG_MACH_STMP37XX=y +# CONFIG_MACH_STMP378X is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=6144 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_STMP_DBG is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# + +# +# Video improvement chips +# +# CONFIG_VIDEO_VIVI is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_BOOT_TRACER=y +# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_STACK_TRACER=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile new file mode 100644 index 00000000000..d156f76b379 --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o +obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot new file mode 100644 index 00000000000..1568ad404d5 --- /dev/null +++ b/arch/arm/mach-stmp378x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S new file mode 100644 index 00000000000..731a92286da --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S @@ -0,0 +1,35 @@ +/* + * Low-level IRQ helper macros for Freescale STMP378X + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT + cmp \irqnr, #0x7f + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h new file mode 100644 index 00000000000..cc59673becd --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/irqs.h @@ -0,0 +1,95 @@ +/* + * Freescale STMP378X interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_BCH 56 +#define IRQ_PXP 57 +#define IRQ_UARTAPP2_TX_DMA 58 +#define IRQ_UARTAPP2_INTERNAL 59 +#define IRQ_UARTAPP2_RX_DMA 60 +#define IRQ_VDAC_DETECT 61 +#define IRQ_VDD5V_DROOP 64 +#define IRQ_DCDC4P2_BO 65 + + +#define NR_REAL_IRQS 128 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* All interrupts are FIQ capable */ +#define FIQ_START IRQ_DEBUG_UART + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h new file mode 100644 index 00000000000..93f952d3596 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/pins.h @@ -0,0 +1,151 @@ +/* + * Freescale STMP378X SoC pin multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16) +#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17) +#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22) +#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26) +#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27) +#define PINID_AUART1_RX STMP3XXX_PINID(0, 28) +#define PINID_AUART1_TX STMP3XXX_PINID(0, 29) +#define PINID_I2C_SCL STMP3XXX_PINID(0, 30) +#define PINID_I2C_SDA STMP3XXX_PINID(0, 31) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_D16 STMP3XXX_PINID(1, 16) +#define PINID_LCD_D17 STMP3XXX_PINID(1, 17) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 18) +#define PINID_LCD_RS STMP3XXX_PINID(1, 19) +#define PINID_LCD_WR STMP3XXX_PINID(1, 20) +#define PINID_LCD_CS STMP3XXX_PINID(1, 21) +#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22) +#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23) +#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24) +#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25) +#define PINID_PWM0 STMP3XXX_PINID(1, 26) +#define PINID_PWM1 STMP3XXX_PINID(1, 27) +#define PINID_PWM2 STMP3XXX_PINID(1, 28) +#define PINID_PWM3 STMP3XXX_PINID(1, 29) +#define PINID_PWM4 STMP3XXX_PINID(1, 30) + +/* Bank 2 */ +#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0) +#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5) +#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6) +#define PINID_ROTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 9) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 10) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 11) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 12) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 13) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 14) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 15) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 21) +#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22) +#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 24) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26) +#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27) +#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 29) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h new file mode 100644 index 00000000000..dbcf85b6ac2 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h @@ -0,0 +1,101 @@ +/* + * stmp378x: APBH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBH +#define _MACH_REGS_APBH + +#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000) +#define REGS_APBH_PHYS 0x80004000 +#define REGS_APBH_SIZE 0x2000 + +#define HW_APBH_CTRL0 0x0 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_SFTRST 0x80000000 + +#define HW_APBH_CTRL1 0x10 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0 + +#define HW_APBH_CTRL2 0x20 + +#define HW_APBH_DEVSEL 0x30 + +#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBH_CHn_NXTCMDAR 0x50 + +#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0 +#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1 +#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2 +#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3 +#define BM_APBH_CHn_CMD_COMMAND 0x00000003 +#define BP_APBH_CHn_CMD_COMMAND 0 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBH_CHn_CMD_XFER_COUNT 16 + +#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBH_CHn_SEMA 0x80 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBH_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h new file mode 100644 index 00000000000..3b934a4d27f --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h @@ -0,0 +1,119 @@ +/* + * stmp378x: APBX register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBX +#define _MACH_REGS_APBX + +#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000) +#define REGS_APBX_PHYS 0x80024000 +#define REGS_APBX_SIZE 0x2000 + +#define HW_APBX_CTRL0 0x0 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +#define BM_APBX_CTRL0_SFTRST 0x80000000 + +#define HW_APBX_CTRL1 0x10 + +#define HW_APBX_CTRL2 0x20 + +#define HW_APBX_CHANNEL_CTRL 0x30 +#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000 +#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16 + +#define HW_APBX_DEVSEL 0x40 + +#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70) +#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70) +#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70) +#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70) +#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70) +#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70) +#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70) +#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70) +#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70) +#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70) +#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70) +#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70) +#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70) +#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70) +#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70) +#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70) + +#define HW_APBX_CHn_NXTCMDAR 0x110 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0 +#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1 +#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2 +#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBX_CHn_CMD_XFER_COUNT 16 + +#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70) +#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70) +#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70) +#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70) +#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70) +#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70) +#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70) +#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70) +#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70) +#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70) +#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70) +#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70) +#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70) +#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70) +#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70) +#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70) + +#define HW_APBX_CHn_BAR 0x130 + +#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70) +#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70) +#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70) +#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70) +#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70) +#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70) +#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70) +#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70) +#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70) +#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70) +#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70) +#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70) +#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70) +#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70) +#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70) +#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70) + +#define HW_APBX_CHn_SEMA 0x140 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBX_CHn_SEMA_PHORE 16 + +#endif + diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h new file mode 100644 index 00000000000..641ac6126f8 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h @@ -0,0 +1,63 @@ +/* + * stmp378x: AUDIOIN register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000) +#define REGS_AUDIOIN_PHYS 0x8004C000 +#define REGS_AUDIOIN_SIZE 0x2000 + +#define HW_AUDIOIN_CTRL 0x0 +#define BM_AUDIOIN_CTRL_RUN 0x00000001 +#define BP_AUDIOIN_CTRL_RUN 0 +#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020 +#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOIN_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOIN_STAT 0x10 + +#define HW_AUDIOIN_ADCSRR 0x20 + +#define HW_AUDIOIN_ADCVOLUME 0x30 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF +#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000 +#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16 + +#define HW_AUDIOIN_ADCDEBUG 0x40 + +#define HW_AUDIOIN_ADCVOL 0x50 +#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F +#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0 +#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030 +#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4 +#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00 +#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8 +#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000 +#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12 +#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000 + +#define HW_AUDIOIN_MICLINE 0x60 + +#define HW_AUDIOIN_ANACLKCTRL 0x70 +#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOIN_DATA 0x80 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h new file mode 100644 index 00000000000..f533e23694a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h @@ -0,0 +1,104 @@ +/* + * stmp378x: AUDIOOUT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000) +#define REGS_AUDIOOUT_PHYS 0x80048000 +#define REGS_AUDIOOUT_SIZE 0x2000 + +#define HW_AUDIOOUT_CTRL 0x0 +#define BM_AUDIOOUT_CTRL_RUN 0x00000001 +#define BP_AUDIOOUT_CTRL_RUN 0 +#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040 +#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOOUT_STAT 0x10 + +#define HW_AUDIOOUT_DACSRR 0x20 +#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF +#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0 +#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000 +#define BP_AUDIOOUT_DACSRR_SRC_INT 16 +#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000 +#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24 +#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000 +#define BP_AUDIOOUT_DACSRR_BASEMULT 28 + +#define HW_AUDIOOUT_DACVOLUME 0x30 +#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100 +#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000 +#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_DACDEBUG 0x40 + +#define HW_AUDIOOUT_HPVOL 0x50 +#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000 +#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000 + +#define HW_AUDIOOUT_PWRDN 0x70 +#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001 +#define BP_AUDIOOUT_PWRDN_HEADPHONE 0 +#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010 +#define BM_AUDIOOUT_PWRDN_ADC 0x00000100 +#define BM_AUDIOOUT_PWRDN_DAC 0x00001000 +#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000 +#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000 + +#define HW_AUDIOOUT_REFCTRL 0x80 +#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0 +#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4 +#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00 +#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8 +#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000 +#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000 +#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000 +#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16 +#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000 +#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000 +#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20 +#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000 +#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000 + +#define HW_AUDIOOUT_ANACTRL 0x90 +#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010 +#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020 + +#define HW_AUDIOOUT_TEST 0xA0 +#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000 +#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22 + +#define HW_AUDIOOUT_BISTCTRL 0xB0 + +#define HW_AUDIOOUT_BISTSTAT0 0xC0 + +#define HW_AUDIOOUT_BISTSTAT1 0xD0 + +#define HW_AUDIOOUT_ANACLKCTRL 0xE0 +#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOOUT_DATA 0xF0 + +#define HW_AUDIOOUT_SPEAKERCTRL 0x100 +#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000 + +#define HW_AUDIOOUT_VERSION 0x200 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h new file mode 100644 index 00000000000..532d2465071 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h @@ -0,0 +1,56 @@ +/* + * stmp378x: BCH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000) +#define REGS_BCH_PHYS 0x8000A000 +#define REGS_BCH_SIZE 0x2000 + +#define HW_BCH_CTRL 0x0 +#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_BCH_CTRL_COMPLETE_IRQ 0 +#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100 + +#define HW_BCH_STATUS0 0x10 +#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_BCH_STATUS0_CORRECTED 0x00000008 +#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00 +#define BP_BCH_STATUS0_STATUS_BLK0 8 +#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_BCH_STATUS0_COMPLETED_CE 16 + +#define HW_BCH_LAYOUTSELECT 0x70 + +#define HW_BCH_FLASH0LAYOUT0 0x80 +#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF +#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0 +#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000 +#define BP_BCH_FLASH0LAYOUT0_ECC0 12 +#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000 +#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16 +#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000 +#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24 +#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF +#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0 +#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000 +#define BP_BCH_FLASH0LAYOUT1_ECCN 12 +#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000 +#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16 + +#define HW_BCH_BLOCKNAME 0x150 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h new file mode 100644 index 00000000000..7c546afd57a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h @@ -0,0 +1,88 @@ +/* + * stmp378x: CLKCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_CLKCTRL +#define _MACH_REGS_CLKCTRL + +#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000) +#define REGS_CLKCTRL_PHYS 0x80040000 +#define REGS_CLKCTRL_SIZE 0x2000 + +#define HW_CLKCTRL_PLLCTRL0 0x0 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 + +#define HW_CLKCTRL_CPU 0x20 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BP_CLKCTRL_CPU_DIV_CPU 0 + +#define HW_CLKCTRL_HBUS 0x30 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BP_CLKCTRL_HBUS_DIV 0 +#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020 + +#define HW_CLKCTRL_XBUS 0x40 + +#define HW_CLKCTRL_XTAL 0x50 +#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000 + +#define HW_CLKCTRL_PIX 0x60 +#define BM_CLKCTRL_PIX_DIV 0x00000FFF +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 + +#define HW_CLKCTRL_SSP 0x70 + +#define HW_CLKCTRL_GPMI 0x80 + +#define HW_CLKCTRL_SPDIF 0x90 + +#define HW_CLKCTRL_EMI 0xA0 +#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F +#define BP_CLKCTRL_EMI_DIV_EMI 0 +#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000 +#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000 +#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000 +#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000 + +#define HW_CLKCTRL_IR 0xB0 + +#define HW_CLKCTRL_SAIF 0xC0 + +#define HW_CLKCTRL_TV 0xD0 + +#define HW_CLKCTRL_ETM 0xE0 + +#define HW_CLKCTRL_FRAC 0xF0 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 + +#define HW_CLKCTRL_FRAC1 0x100 + +#define HW_CLKCTRL_CLKSEQ 0x110 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 + +#define HW_CLKCTRL_RESET 0x120 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +#define BP_CLKCTRL_RESET_DIG 0 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h new file mode 100644 index 00000000000..fdedd00c0e2 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h @@ -0,0 +1,87 @@ +/* + * stmp378x: DCP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000) +#define REGS_DCP_PHYS 0x80028000 +#define REGS_DCP_SIZE 0x2000 + +#define HW_DCP_CTRL 0x0 +#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF +#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0 +#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000 +#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000 +#define BM_DCP_CTRL_CLKGATE 0x40000000 +#define BM_DCP_CTRL_SFTRST 0x80000000 + +#define HW_DCP_STAT 0x10 +#define BM_DCP_STAT_IRQ 0x0000000F +#define BP_DCP_STAT_IRQ 0 + +#define HW_DCP_CHANNELCTRL 0x20 +#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF +#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0 + +#define HW_DCP_CONTEXT 0x50 +#define BM_DCP_PACKET1_INTERRUPT 0x00000001 +#define BP_DCP_PACKET1_INTERRUPT 0 +#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002 +#define BM_DCP_PACKET1_CHAIN 0x00000004 +#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008 +#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020 +#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040 +#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100 +#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200 +#define BM_DCP_PACKET1_OTP_KEY 0x00000400 +#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800 +#define BM_DCP_PACKET1_HASH_INIT 0x00001000 +#define BM_DCP_PACKET1_HASH_TERM 0x00002000 +#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F +#define BP_DCP_PACKET2_CIPHER_SELECT 0 +#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0 +#define BP_DCP_PACKET2_CIPHER_MODE 4 +#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00 +#define BP_DCP_PACKET2_KEY_SELECT 8 +#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000 +#define BP_DCP_PACKET2_HASH_SELECT 16 +#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000 +#define BP_DCP_PACKET2_CIPHER_CFG 24 + +#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40) +#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40) +#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40) +#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40) + +#define HW_DCP_CHnCMDPTR 0x100 + +#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40) +#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40) +#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40) +#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40) + +#define HW_DCP_CHnSEMA 0x110 +#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF +#define BP_DCP_CHnSEMA_INCREMENT 0 + +#define HW_DCP_CH0STAT (0x120 + 0 * 0x40) +#define HW_DCP_CH1STAT (0x120 + 1 * 0x40) +#define HW_DCP_CH2STAT (0x120 + 2 * 0x40) +#define HW_DCP_CH3STAT (0x120 + 3 * 0x40) + +#define HW_DCP_CHnSTAT 0x120 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h new file mode 100644 index 00000000000..5293005523b --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h @@ -0,0 +1,38 @@ +/* + * stmp378x: DIGCTL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000) +#define REGS_DIGCTL_PHYS 0x8001C000 +#define REGS_DIGCTL_SIZE 0x2000 + +#define HW_DIGCTL_CTRL 0x0 +#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004 + +#define HW_DIGCTL_ARMCACHE 0x2B0 +#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003 +#define BP_DIGCTL_ARMCACHE_ITAG_SS 0 +#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030 +#define BP_DIGCTL_ARMCACHE_DTAG_SS 4 +#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300 +#define BP_DIGCTL_ARMCACHE_CACHE_SS 8 +#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000 +#define BP_DIGCTL_ARMCACHE_DRTY_SS 12 +#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000 +#define BP_DIGCTL_ARMCACHE_VALID_SS 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h new file mode 100644 index 00000000000..02851431677 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h @@ -0,0 +1,27 @@ +/* + * stmp378x: DRAM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000) +#define REGS_DRAM_PHYS 0x800E0000 +#define REGS_DRAM_SIZE 0x2000 + +#define HW_DRAM_CTL06 0x18 + +#define HW_DRAM_CTL08 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h new file mode 100644 index 00000000000..da25f7e397e --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h @@ -0,0 +1,45 @@ +/* + * stmp378x: DRI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000) +#define REGS_DRI_PHYS 0x80074000 +#define REGS_DRI_SIZE 0x2000 + +#define HW_DRI_CTRL 0x0 +#define BM_DRI_CTRL_RUN 0x00000001 +#define BP_DRI_CTRL_RUN 0 +#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002 +#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004 +#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008 +#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200 +#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400 +#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800 +#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000 +#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000 +#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000 +#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000 +#define BM_DRI_CTRL_CLKGATE 0x40000000 +#define BM_DRI_CTRL_SFTRST 0x80000000 + +#define HW_DRI_TIMING 0x10 +#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF +#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0 +#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000 +#define BP_DRI_TIMING_PILOT_REP_RATE 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h new file mode 100644 index 00000000000..cc353bec331 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h @@ -0,0 +1,39 @@ +/* + * stmp378x: ECC8 register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000) +#define REGS_ECC8_PHYS 0x80008000 +#define REGS_ECC8_SIZE 0x2000 + +#define HW_ECC8_CTRL 0x0 +#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_ECC8_CTRL_COMPLETE_IRQ 0 +#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100 +#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000 + +#define HW_ECC8_STATUS0 0x10 +#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_ECC8_STATUS0_CORRECTED 0x00000008 +#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00 +#define BP_ECC8_STATUS0_STATUS_AUX 8 +#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_ECC8_STATUS0_COMPLETED_CE 16 + +#define HW_ECC8_STATUS1 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h new file mode 100644 index 00000000000..98773fc33d7 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h @@ -0,0 +1,25 @@ +/* + * stmp378x: EMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000) +#define REGS_EMI_PHYS 0x80020000 +#define REGS_EMI_SIZE 0x2000 + +#define HW_EMI_STAT 0x10 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h new file mode 100644 index 00000000000..2cc8bbe9168 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h @@ -0,0 +1,78 @@ +/* + * stmp378x: GPMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000) +#define REGS_GPMI_PHYS 0x8000C000 +#define REGS_GPMI_SIZE 0x2000 + +#define HW_GPMI_CTRL0 0x0 +#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_GPMI_CTRL0_XFER_COUNT 0 +#define BM_GPMI_CTRL0_CS 0x00300000 +#define BP_GPMI_CTRL0_CS 20 +#define BM_GPMI_CTRL0_LOCK_CS 0x00400000 +#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000 +#define BM_GPMI_CTRL0_ADDRESS 0x000E0000 +#define BP_GPMI_CTRL0_ADDRESS 17 +#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0 +#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1 +#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2 +#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000 +#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000 +#define BP_GPMI_CTRL0_COMMAND_MODE 24 +#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 +#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 +#define BM_GPMI_CTRL0_RUN 0x20000000 +#define BM_GPMI_CTRL0_CLKGATE 0x40000000 +#define BM_GPMI_CTRL0_SFTRST 0x80000000 +#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF +#define BP_GPMI_ECCCTRL_BUFFER_MASK 0 +#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000 +#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000 +#define BP_GPMI_ECCCTRL_ECC_CMD 13 +#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0 +#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1 +#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2 +#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3 + +#define HW_GPMI_CTRL1 0x60 +#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001 +#define BP_GPMI_CTRL1_GPMI_MODE 0 +#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004 +#define BM_GPMI_CTRL1_DEV_RESET 0x00000008 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200 +#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400 +#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000 +#define BP_GPMI_CTRL1_RDN_DELAY 12 +#define BM_GPMI_CTRL1_BCH_MODE 0x00040000 + +#define HW_GPMI_TIMING0 0x70 +#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF +#define BP_GPMI_TIMING0_DATA_SETUP 0 +#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00 +#define BP_GPMI_TIMING0_DATA_HOLD 8 +#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000 +#define BP_GPMI_TIMING0_ADDRESS_SETUP 16 + +#define HW_GPMI_TIMING1 0x80 +#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000 +#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h new file mode 100644 index 00000000000..13a234c9943 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h @@ -0,0 +1,55 @@ +/* + * stmp378x: I2C register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000) +#define REGS_I2C_PHYS 0x80058000 +#define REGS_I2C_SIZE 0x2000 + +#define HW_I2C_CTRL0 0x0 +#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_I2C_CTRL0_XFER_COUNT 0 +#define BM_I2C_CTRL0_DIRECTION 0x00010000 +#define BM_I2C_CTRL0_MASTER_MODE 0x00020000 +#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000 +#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000 +#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000 +#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 +#define BM_I2C_CTRL0_CLKGATE 0x40000000 +#define BM_I2C_CTRL0_SFTRST 0x80000000 + +#define HW_I2C_TIMING0 0x10 + +#define HW_I2C_TIMING1 0x20 + +#define HW_I2C_TIMING2 0x30 + +#define HW_I2C_CTRL1 0x40 +#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001 +#define BP_I2C_CTRL1_SLAVE_IRQ 0 +#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002 +#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004 +#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008 +#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010 +#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020 +#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040 +#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080 +#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000 + +#define HW_I2C_VERSION 0x90 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h new file mode 100644 index 00000000000..f996e80f40e --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h @@ -0,0 +1,45 @@ +/* + * stmp378x: ICOLL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_ICOLL +#define _MACH_REGS_ICOLL + +#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0) +#define REGS_ICOLL_PHYS 0x80000000 +#define REGS_ICOLL_SIZE 0x2000 + +#define HW_ICOLL_VECTOR 0x0 + +#define HW_ICOLL_LEVELACK 0x10 +#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F +#define BP_ICOLL_LEVELACK_IRQLEVELACK 0 + +#define HW_ICOLL_CTRL 0x20 +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BM_ICOLL_CTRL_SFTRST 0x80000000 + +#define HW_ICOLL_STAT 0x70 + +#define HW_ICOLL_INTERRUPTn 0x120 + +#define HW_ICOLL_INTERRUPTn 0x120 +#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ir.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h new file mode 100644 index 00000000000..a5b4ef10fab --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h @@ -0,0 +1,23 @@ +/* + * stmp378x: IR register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000) +#define REGS_IR_PHYS 0x80078000 +#define REGS_IR_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h new file mode 100644 index 00000000000..9cdbef4badc --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h @@ -0,0 +1,195 @@ +/* + * stmp378x: LCDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000) +#define REGS_LCDIF_PHYS 0x80030000 +#define REGS_LCDIF_SIZE 0x2000 + +#define HW_LCDIF_CTRL 0x0 +#define BM_LCDIF_CTRL_RUN 0x00000001 +#define BP_LCDIF_CTRL_RUN 0 +#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020 +#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080 +#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300 +#define BP_LCDIF_CTRL_WORD_LENGTH 8 +#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00 +#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10 +#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000 +#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14 +#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000 +#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000 +#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000 +#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000 +#define BM_LCDIF_CTRL_DVI_MODE 0x00100000 +#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000 +#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21 +#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000 +#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000 +#define BM_LCDIF_CTRL_CLKGATE 0x40000000 +#define BM_LCDIF_CTRL_SFTRST 0x80000000 + +#define HW_LCDIF_CTRL1 0x10 +#define BM_LCDIF_CTRL1_RESET 0x00000001 +#define BP_LCDIF_CTRL1_RESET 0 +#define BM_LCDIF_CTRL1_MODE86 0x00000002 +#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100 +#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200 +#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400 +#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000 +#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000 +#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16 +#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000 +#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000 + +#define HW_LCDIF_TRANSFER_COUNT 0x20 +#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF +#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0 +#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000 +#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16 + +#define HW_LCDIF_CUR_BUF 0x30 + +#define HW_LCDIF_NEXT_BUF 0x40 + +#define HW_LCDIF_TIMING 0x60 + +#define HW_LCDIF_VDCTRL0 0x70 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF +#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000 +#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000 +#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000 +#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000 +#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000 +#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000 +#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000 +#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000 + +#define HW_LCDIF_VDCTRL1 0x80 +#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF +#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0 + +#define HW_LCDIF_VDCTRL2 0x90 +#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF +#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0 +#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000 +#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24 + +#define HW_LCDIF_VDCTRL3 0xA0 +#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF +#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0 +#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000 +#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16 + +#define HW_LCDIF_VDCTRL4 0xB0 +#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF +#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000 + +#define HW_LCDIF_DVICTRL0 0xC0 +#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF +#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0 +#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00 +#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10 +#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000 +#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20 + +#define HW_LCDIF_DVICTRL1 0xD0 +#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF +#define BP_LCDIF_DVICTRL1_F2_START_LINE 0 +#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00 +#define BP_LCDIF_DVICTRL1_F1_END_LINE 10 +#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000 +#define BP_LCDIF_DVICTRL1_F1_START_LINE 20 + +#define HW_LCDIF_DVICTRL2 0xE0 +#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF +#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0 +#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00 +#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10 +#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000 +#define BP_LCDIF_DVICTRL2_F2_END_LINE 20 + +#define HW_LCDIF_DVICTRL3 0xF0 +#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF +#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0 +#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000 +#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16 + +#define HW_LCDIF_DVICTRL4 0x100 +#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF +#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0 +#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00 +#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8 +#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000 +#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16 +#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000 +#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24 + +#define HW_LCDIF_CSC_COEFF0 0x110 +#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003 +#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0 +#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000 +#define BP_LCDIF_CSC_COEFF0_C0 16 + +#define HW_LCDIF_CSC_COEFF1 0x120 +#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF +#define BP_LCDIF_CSC_COEFF1_C1 0 +#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000 +#define BP_LCDIF_CSC_COEFF1_C2 16 + +#define HW_LCDIF_CSC_COEFF2 0x130 +#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF +#define BP_LCDIF_CSC_COEFF2_C3 0 +#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000 +#define BP_LCDIF_CSC_COEFF2_C4 16 + +#define HW_LCDIF_CSC_COEFF3 0x140 +#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF +#define BP_LCDIF_CSC_COEFF3_C5 0 +#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000 +#define BP_LCDIF_CSC_COEFF3_C6 16 + +#define HW_LCDIF_CSC_COEFF4 0x150 +#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF +#define BP_LCDIF_CSC_COEFF4_C7 0 +#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000 +#define BP_LCDIF_CSC_COEFF4_C8 16 + +#define HW_LCDIF_CSC_OFFSET 0x160 +#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF +#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0 +#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000 +#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16 + +#define HW_LCDIF_CSC_LIMIT 0x170 +#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF +#define BP_LCDIF_CSC_LIMIT_Y_MAX 0 +#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00 +#define BP_LCDIF_CSC_LIMIT_Y_MIN 8 +#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000 +#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16 +#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000 +#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24 + +#define HW_LCDIF_STAT 0x1D0 +#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h new file mode 100644 index 00000000000..cb8cb06f827 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h @@ -0,0 +1,99 @@ +/* + * stmp378x: LRADC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000) +#define REGS_LRADC_PHYS 0x80050000 +#define REGS_LRADC_SIZE 0x2000 + +#define HW_LRADC_CTRL0 0x0 +#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF +#define BP_LRADC_CTRL0_SCHEDULE 0 +#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000 +#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000 +#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000 +#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000 +#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000 +#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000 +#define BM_LRADC_CTRL0_CLKGATE 0x40000000 +#define BM_LRADC_CTRL0_SFTRST 0x80000000 + +#define HW_LRADC_CTRL1 0x10 +#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001 +#define BP_LRADC_CTRL1_LRADC0_IRQ 0 +#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020 +#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100 +#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000 +#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000 + +#define HW_LRADC_CTRL2 0x20 +#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000 +#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16 +#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000 +#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000 +#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000 +#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24 + +#define HW_LRADC_CTRL3 0x30 +#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300 +#define BP_LRADC_CTRL3_CYCLE_TIME 8 + +#define HW_LRADC_STATUS 0x40 +#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001 +#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0 + +#define HW_LRADC_CH0 (0x50 + 0 * 0x10) +#define HW_LRADC_CH1 (0x50 + 1 * 0x10) +#define HW_LRADC_CH2 (0x50 + 2 * 0x10) +#define HW_LRADC_CH3 (0x50 + 3 * 0x10) +#define HW_LRADC_CH4 (0x50 + 4 * 0x10) +#define HW_LRADC_CH5 (0x50 + 5 * 0x10) +#define HW_LRADC_CH6 (0x50 + 6 * 0x10) +#define HW_LRADC_CH7 (0x50 + 7 * 0x10) + +#define HW_LRADC_CHn 0x50 +#define BM_LRADC_CHn_VALUE 0x0003FFFF +#define BP_LRADC_CHn_VALUE 0 +#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000 +#define BP_LRADC_CHn_NUM_SAMPLES 24 +#define BM_LRADC_CHn_ACCUMULATE 0x20000000 + +#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10) +#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10) +#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10) +#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10) + +#define HW_LRADC_DELAYn 0xD0 +#define BM_LRADC_DELAYn_DELAY 0x000007FF +#define BP_LRADC_DELAYn_DELAY 0 +#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800 +#define BP_LRADC_DELAYn_LOOP_COUNT 11 +#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000 +#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16 +#define BM_LRADC_DELAYn_KICK 0x00100000 +#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000 +#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24 + +#define HW_LRADC_CTRL4 0x140 +#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000 +#define BP_LRADC_CTRL4_LRADC6SELECT 24 +#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000 +#define BP_LRADC_CTRL4_LRADC7SELECT 28 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h new file mode 100644 index 00000000000..f0af64d9937 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h @@ -0,0 +1,40 @@ +/* + * stmp378x: OCOTP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000) +#define REGS_OCOTP_PHYS 0x8002C000 +#define REGS_OCOTP_SIZE 0x2000 + +#define HW_OCOTP_CTRL 0x0 +#define BM_OCOTP_CTRL_BUSY 0x00000100 +#define BM_OCOTP_CTRL_ERROR 0x00000200 +#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000 +#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000 +#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000 +#define BP_OCOTP_CTRL_WR_UNLOCK 16 + +#define HW_OCOTP_DATA 0x10 + +#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10) +#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10) +#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10) +#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10) + +#define HW_OCOTP_CUSTn 0x20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h new file mode 100644 index 00000000000..50d90ea1b13 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h @@ -0,0 +1,90 @@ +/* + * stmp378x: PINCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_PINCTRL +#define _MACH_REGS_PINCTRL + +#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000) +#define REGS_PINCTRL_PHYS 0x80018000 +#define REGS_PINCTRL_SIZE 0x2000 + +#define HW_PINCTRL_MUXSEL0 0x100 +#define HW_PINCTRL_MUXSEL1 0x110 +#define HW_PINCTRL_MUXSEL2 0x120 +#define HW_PINCTRL_MUXSEL3 0x130 +#define HW_PINCTRL_MUXSEL4 0x140 +#define HW_PINCTRL_MUXSEL5 0x150 +#define HW_PINCTRL_MUXSEL6 0x160 +#define HW_PINCTRL_MUXSEL7 0x170 + +#define HW_PINCTRL_DRIVE0 0x200 +#define HW_PINCTRL_DRIVE1 0x210 +#define HW_PINCTRL_DRIVE2 0x220 +#define HW_PINCTRL_DRIVE3 0x230 +#define HW_PINCTRL_DRIVE4 0x240 +#define HW_PINCTRL_DRIVE5 0x250 +#define HW_PINCTRL_DRIVE6 0x260 +#define HW_PINCTRL_DRIVE7 0x270 +#define HW_PINCTRL_DRIVE8 0x280 +#define HW_PINCTRL_DRIVE9 0x290 +#define HW_PINCTRL_DRIVE10 0x2A0 +#define HW_PINCTRL_DRIVE11 0x2B0 +#define HW_PINCTRL_DRIVE12 0x2C0 +#define HW_PINCTRL_DRIVE13 0x2D0 +#define HW_PINCTRL_DRIVE14 0x2E0 + +#define HW_PINCTRL_PULL0 0x400 +#define HW_PINCTRL_PULL1 0x410 +#define HW_PINCTRL_PULL2 0x420 +#define HW_PINCTRL_PULL3 0x430 + +#define HW_PINCTRL_DOUT0 0x500 +#define HW_PINCTRL_DOUT1 0x510 +#define HW_PINCTRL_DOUT2 0x520 + +#define HW_PINCTRL_DIN0 0x600 +#define HW_PINCTRL_DIN1 0x610 +#define HW_PINCTRL_DIN2 0x620 + +#define HW_PINCTRL_DOE0 0x700 +#define HW_PINCTRL_DOE1 0x710 +#define HW_PINCTRL_DOE2 0x720 + +#define HW_PINCTRL_PIN2IRQ0 0x800 +#define HW_PINCTRL_PIN2IRQ1 0x810 +#define HW_PINCTRL_PIN2IRQ2 0x820 + +#define HW_PINCTRL_IRQEN0 0x900 +#define HW_PINCTRL_IRQEN1 0x910 +#define HW_PINCTRL_IRQEN2 0x920 + +#define HW_PINCTRL_IRQLEVEL0 0xA00 +#define HW_PINCTRL_IRQLEVEL1 0xA10 +#define HW_PINCTRL_IRQLEVEL2 0xA20 + +#define HW_PINCTRL_IRQPOL0 0xB00 +#define HW_PINCTRL_IRQPOL1 0xB10 +#define HW_PINCTRL_IRQPOL2 0xB20 + +#define HW_PINCTRL_IRQSTAT0 0xC00 +#define HW_PINCTRL_IRQSTAT1 0xC10 +#define HW_PINCTRL_IRQSTAT2 0xC20 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h new file mode 100644 index 00000000000..e454c830f07 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h @@ -0,0 +1,63 @@ +/* + * stmp378x: POWER register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_POWER +#define _MACH_REGS_POWER + +#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000) +#define REGS_POWER_PHYS 0x80044000 +#define REGS_POWER_SIZE 0x2000 + +#define HW_POWER_CTRL 0x0 +#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001 +#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0 +#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000 +#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000 +#define BM_POWER_CTRL_CLKGATE 0x40000000 + +#define HW_POWER_5VCTRL 0x10 +#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040 + +#define HW_POWER_MINPWR 0x20 + +#define HW_POWER_CHARGE 0x30 + +#define HW_POWER_VDDDCTRL 0x40 + +#define HW_POWER_VDDACTRL 0x50 + +#define HW_POWER_VDDIOCTRL 0x60 +#define BM_POWER_VDDIOCTRL_TRG 0x0000001F +#define BP_POWER_VDDIOCTRL_TRG 0 + +#define HW_POWER_STS 0xC0 +#define BM_POWER_STS_VBUSVALID 0x00000002 +#define BM_POWER_STS_BVALID 0x00000004 +#define BM_POWER_STS_AVALID 0x00000008 +#define BM_POWER_STS_DC_OK 0x00000200 + +#define HW_POWER_RESET 0x100 + +#define HW_POWER_DEBUG 0x110 +#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002 +#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004 +#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h new file mode 100644 index 00000000000..0d0f9e56ec7 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h @@ -0,0 +1,53 @@ +/* + * stmp378x: PWM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000) +#define REGS_PWM_PHYS 0x80064000 +#define REGS_PWM_SIZE 0x2000 + +#define HW_PWM_CTRL 0x0 +#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004 +#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020 + +#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20) +#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20) +#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20) +#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20) + +#define HW_PWM_ACTIVEn 0x10 +#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF +#define BP_PWM_ACTIVEn_ACTIVE 0 +#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000 +#define BP_PWM_ACTIVEn_INACTIVE 16 + +#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20) +#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20) +#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20) +#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20) + +#define HW_PWM_PERIODn 0x20 +#define BM_PWM_PERIODn_PERIOD 0x0000FFFF +#define BP_PWM_PERIODn_PERIOD 0 +#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000 +#define BP_PWM_PERIODn_ACTIVE_STATE 16 +#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000 +#define BP_PWM_PERIODn_INACTIVE_STATE 18 +#define BM_PWM_PERIODn_CDIV 0x00700000 +#define BP_PWM_PERIODn_CDIV 20 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h new file mode 100644 index 00000000000..54d297896de --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h @@ -0,0 +1,140 @@ +/* + * stmp378x: PXP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000) +#define REGS_PXP_PHYS 0x8002A000 +#define REGS_PXP_SIZE 0x2000 + +#define HW_PXP_CTRL 0x0 +#define BM_PXP_CTRL_ENABLE 0x00000001 +#define BP_PXP_CTRL_ENABLE 0 +#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002 +#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0 +#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4 +#define BM_PXP_CTRL_ROTATE 0x00000300 +#define BP_PXP_CTRL_ROTATE 8 +#define BM_PXP_CTRL_HFLIP 0x00000400 +#define BM_PXP_CTRL_VFLIP 0x00000800 +#define BM_PXP_CTRL_S0_FORMAT 0x0000F000 +#define BP_PXP_CTRL_S0_FORMAT 12 +#define BM_PXP_CTRL_SCALE 0x00040000 +#define BM_PXP_CTRL_CROP 0x00080000 + +#define HW_PXP_STAT 0x10 +#define BM_PXP_STAT_IRQ 0x00000001 +#define BP_PXP_STAT_IRQ 0 + +#define HW_PXP_RGBBUF 0x20 + +#define HW_PXP_RGBSIZE 0x40 +#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF +#define BP_PXP_RGBSIZE_HEIGHT 0 +#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000 +#define BP_PXP_RGBSIZE_WIDTH 12 + +#define HW_PXP_S0BUF 0x50 + +#define HW_PXP_S0UBUF 0x60 + +#define HW_PXP_S0VBUF 0x70 + +#define HW_PXP_S0PARAM 0x80 +#define BM_PXP_S0PARAM_HEIGHT 0x000000FF +#define BP_PXP_S0PARAM_HEIGHT 0 +#define BM_PXP_S0PARAM_WIDTH 0x0000FF00 +#define BP_PXP_S0PARAM_WIDTH 8 +#define BM_PXP_S0PARAM_YBASE 0x00FF0000 +#define BP_PXP_S0PARAM_YBASE 16 +#define BM_PXP_S0PARAM_XBASE 0xFF000000 +#define BP_PXP_S0PARAM_XBASE 24 + +#define HW_PXP_S0BACKGROUND 0x90 + +#define HW_PXP_S0CROP 0xA0 +#define BM_PXP_S0CROP_HEIGHT 0x000000FF +#define BP_PXP_S0CROP_HEIGHT 0 +#define BM_PXP_S0CROP_WIDTH 0x0000FF00 +#define BP_PXP_S0CROP_WIDTH 8 +#define BM_PXP_S0CROP_YBASE 0x00FF0000 +#define BP_PXP_S0CROP_YBASE 16 +#define BM_PXP_S0CROP_XBASE 0xFF000000 +#define BP_PXP_S0CROP_XBASE 24 + +#define HW_PXP_S0SCALE 0xB0 +#define BM_PXP_S0SCALE_XSCALE 0x00003FFF +#define BP_PXP_S0SCALE_XSCALE 0 +#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000 +#define BP_PXP_S0SCALE_YSCALE 16 + +#define HW_PXP_CSCCOEFF0 0xD0 + +#define HW_PXP_CSCCOEFF1 0xE0 + +#define HW_PXP_CSCCOEFF2 0xF0 + +#define HW_PXP_S0COLORKEYLOW 0x180 + +#define HW_PXP_S0COLORKEYHIGH 0x190 + +#define HW_PXP_OL0 (0x200 + 0 * 0x40) +#define HW_PXP_OL1 (0x200 + 1 * 0x40) +#define HW_PXP_OL2 (0x200 + 2 * 0x40) +#define HW_PXP_OL3 (0x200 + 3 * 0x40) +#define HW_PXP_OL4 (0x200 + 4 * 0x40) +#define HW_PXP_OL5 (0x200 + 5 * 0x40) +#define HW_PXP_OL6 (0x200 + 6 * 0x40) +#define HW_PXP_OL7 (0x200 + 7 * 0x40) + +#define HW_PXP_OLn 0x200 + +#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40) +#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40) +#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40) +#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40) +#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40) +#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40) +#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40) +#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40) + +#define HW_PXP_OLnSIZE 0x210 +#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF +#define BP_PXP_OLnSIZE_HEIGHT 0 +#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00 +#define BP_PXP_OLnSIZE_WIDTH 8 + +#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40) +#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40) +#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40) +#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40) +#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40) +#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40) +#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40) +#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40) + +#define HW_PXP_OLnPARAM 0x220 +#define BM_PXP_OLnPARAM_ENABLE 0x00000001 +#define BP_PXP_OLnPARAM_ENABLE 0 +#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006 +#define BP_PXP_OLnPARAM_ALPHA_CNTL 1 +#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008 +#define BM_PXP_OLnPARAM_FORMAT 0x000000F0 +#define BP_PXP_OLnPARAM_FORMAT 4 +#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00 +#define BP_PXP_OLnPARAM_ALPHA 8 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h new file mode 100644 index 00000000000..b8dbd6742d9 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h @@ -0,0 +1,59 @@ +/* + * stmp378x: RTC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000) +#define REGS_RTC_PHYS 0x8005C000 +#define REGS_RTC_SIZE 0x2000 + +#define HW_RTC_CTRL 0x0 +#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001 +#define BP_RTC_CTRL_ALARM_IRQ_EN 0 +#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002 +#define BM_RTC_CTRL_ALARM_IRQ 0x00000004 +#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008 +#define BM_RTC_CTRL_WATCHDOGEN 0x00000010 + +#define HW_RTC_STAT 0x10 +#define BM_RTC_STAT_NEW_REGS 0x0000FF00 +#define BP_RTC_STAT_NEW_REGS 8 +#define BM_RTC_STAT_STALE_REGS 0x00FF0000 +#define BP_RTC_STAT_STALE_REGS 16 +#define BM_RTC_STAT_RTC_PRESENT 0x80000000 + +#define HW_RTC_SECONDS 0x30 + +#define HW_RTC_ALARM 0x40 + +#define HW_RTC_WATCHDOG 0x50 + +#define HW_RTC_PERSISTENT0 0x60 +#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002 +#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004 +#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010 +#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020 +#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080 +#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000 +#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18 + +#define HW_RTC_PERSISTENT1 0x70 +#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF +#define BP_RTC_PERSISTENT1_GENERAL 0 + +#define HW_RTC_VERSION 0xD0 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-saif.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h new file mode 100644 index 00000000000..6df41762c2a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h @@ -0,0 +1,21 @@ +/* + * stmp378x: SAIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SAIF_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h new file mode 100644 index 00000000000..801539848c2 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h @@ -0,0 +1,49 @@ +/* + * stmp378x: SPDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000) +#define REGS_SPDIF_PHYS 0x80054000 +#define REGS_SPDIF_SIZE 0x2000 + +#define HW_SPDIF_CTRL 0x0 +#define BM_SPDIF_CTRL_RUN 0x00000001 +#define BP_SPDIF_CTRL_RUN 0 +#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010 +#define BM_SPDIF_CTRL_CLKGATE 0x40000000 +#define BM_SPDIF_CTRL_SFTRST 0x80000000 + +#define HW_SPDIF_STAT 0x10 + +#define HW_SPDIF_FRAMECTRL 0x20 + +#define HW_SPDIF_SRR 0x30 +#define BM_SPDIF_SRR_RATE 0x000FFFFF +#define BP_SPDIF_SRR_RATE 0 +#define BM_SPDIF_SRR_BASEMULT 0x70000000 +#define BP_SPDIF_SRR_BASEMULT 28 + +#define HW_SPDIF_DEBUG 0x40 + +#define HW_SPDIF_DATA 0x50 + +#define HW_SPDIF_VERSION 0x60 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h new file mode 100644 index 00000000000..28aacf0f58e --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h @@ -0,0 +1,102 @@ +/* + * stmp378x: SSP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000) +#define REGS_SSP1_PHYS 0x80010000 +#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000) +#define REGS_SSP2_PHYS 0x80034000 +#define REGS_SSP_SIZE 0x2000 + +#define HW_SSP_CTRL0 0x0 +#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_ENABLE 0x00010000 +#define BM_SSP_CTRL0_GET_RESP 0x00020000 +#define BM_SSP_CTRL0_LONG_RESP 0x00080000 +#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000 +#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000 +#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000 +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_DATA_XFER 0x01000000 +#define BM_SSP_CTRL0_READ 0x02000000 +#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000 +#define BM_SSP_CTRL0_LOCK_CS 0x08000000 +#define BM_SSP_CTRL0_RUN 0x20000000 +#define BM_SSP_CTRL0_CLKGATE 0x40000000 +#define BM_SSP_CTRL0_SFTRST 0x80000000 + +#define HW_SSP_CMD0 0x10 +#define BM_SSP_CMD0_CMD 0x000000FF +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00 +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000 +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_APPEND_8CYC 0x00100000 +#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF +#define BP_SSP_CMD1_CMD_ARG 0 + +#define HW_SSP_TIMING 0x50 +#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00 +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000 +#define BP_SSP_TIMING_TIMEOUT 16 + +#define HW_SSP_CTRL1 0x60 +#define BM_SSP_CTRL1_SSP_MODE 0x0000000F +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0 +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_POLARITY 0x00000200 +#define BM_SSP_CTRL1_PHASE 0x00000400 +#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000 +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000 +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000 +#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000 + +#define HW_SSP_DATA 0x70 + +#define HW_SSP_SDRESP0 0x80 + +#define HW_SSP_SDRESP1 0x90 + +#define HW_SSP_SDRESP2 0xA0 + +#define HW_SSP_SDRESP3 0xB0 + +#define HW_SSP_STATUS 0xC0 +#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020 +#define BM_SSP_STATUS_TIMEOUT 0x00001000 +#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000 +#define BM_SSP_STATUS_RESP_ERR 0x00008000 +#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000 +#define BM_SSP_STATUS_CARD_DETECT 0x10000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h new file mode 100644 index 00000000000..08343a8b556 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h @@ -0,0 +1,23 @@ +/* + * stmp378x: SYDMA register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000) +#define REGS_SYDMA_PHYS 0x80026000 +#define REGS_SYDMA_SIZE 0x2000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h new file mode 100644 index 00000000000..b5527957c67 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h @@ -0,0 +1,68 @@ +/* + * stmp378x: TIMROT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_TIMROT +#define _MACH_REGS_TIMROT + +#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000) +#define REGS_TIMROT_PHYS 0x80068000 +#define REGS_TIMROT_SIZE 0x2000 + +#define HW_TIMROT_ROTCTRL 0x0 +#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007 +#define BP_TIMROT_ROTCTRL_SELECT_A 0 +#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070 +#define BP_TIMROT_ROTCTRL_SELECT_B 4 +#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100 +#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200 +#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00 +#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10 +#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000 +#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000 +#define BP_TIMROT_ROTCTRL_DIVIDER 16 +#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 + +#define HW_TIMROT_ROTCOUNT 0x10 +#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF +#define BP_TIMROT_ROTCOUNT_UPDOWN 0 + +#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20) +#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20) +#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20) + +#define HW_TIMROT_TIMCTRLn 0x20 +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BP_TIMROT_TIMCTRLn_PRESCALE 4 +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 + +#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20) +#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20) +#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20) + +#define HW_TIMROT_TIMCOUNTn 0x30 + +#endif diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h new file mode 100644 index 00000000000..7f895cb3435 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h @@ -0,0 +1,67 @@ +/* + * stmp378x: TVENC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000) +#define REGS_TVENC_PHYS 0x80038000 +#define REGS_TVENC_SIZE 0x2000 + +#define HW_TVENC_CTRL 0x0 +#define BM_TVENC_CTRL_CLKGATE 0x40000000 +#define BM_TVENC_CTRL_SFTRST 0x80000000 + +#define HW_TVENC_CONFIG 0x10 +#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007 +#define BP_TVENC_CONFIG_ENCD_MODE 0 +#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070 +#define BP_TVENC_CONFIG_SYNC_MODE 4 +#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200 +#define BM_TVENC_CONFIG_CGAIN 0x0000C000 +#define BP_TVENC_CONFIG_CGAIN 14 +#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000 +#define BP_TVENC_CONFIG_YGAIN_SEL 16 +#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000 + +#define HW_TVENC_SYNCOFFSET 0x30 + +#define HW_TVENC_COLORSUB0 0xC0 + +#define HW_TVENC_COLORBURST 0x140 +#define BM_TVENC_COLORBURST_PBA 0x00FF0000 +#define BP_TVENC_COLORBURST_PBA 16 +#define BM_TVENC_COLORBURST_NBA 0xFF000000 +#define BP_TVENC_COLORBURST_NBA 24 + +#define HW_TVENC_MACROVISION0 0x150 + +#define HW_TVENC_MACROVISION1 0x160 + +#define HW_TVENC_MACROVISION2 0x170 + +#define HW_TVENC_MACROVISION3 0x180 + +#define HW_TVENC_MACROVISION4 0x190 + +#define HW_TVENC_DACCTRL 0x1A0 +#define BM_TVENC_DACCTRL_RVAL 0x00000070 +#define BP_TVENC_DACCTRL_RVAL 4 +#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100 +#define BM_TVENC_DACCTRL_PWRUP1 0x00001000 +#define BM_TVENC_DACCTRL_GAINUP 0x00040000 +#define BM_TVENC_DACCTRL_GAINDN 0x00080000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h new file mode 100644 index 00000000000..a251e68bb3a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h @@ -0,0 +1,87 @@ +/* + * stmp378x: UARTAPP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000) +#define REGS_UARTAPP1_PHYS 0x8006C000 +#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000) +#define REGS_UARTAPP2_PHYS 0x8006E000 +#define REGS_UARTAPP_SIZE 0x2000 + +#define HW_UARTAPP_CTRL0 0x0 +#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL0_XFER_COUNT 0 +#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000 +#define BP_UARTAPP_CTRL0_RXTIMEOUT 16 +#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000 +#define BM_UARTAPP_CTRL0_RUN 0x20000000 +#define BM_UARTAPP_CTRL0_SFTRST 0x80000000 +#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL1_XFER_COUNT 0 +#define BM_UARTAPP_CTRL1_RUN 0x10000000 + +#define HW_UARTAPP_CTRL2 0x20 +#define BM_UARTAPP_CTRL2_UARTEN 0x00000001 +#define BP_UARTAPP_CTRL2_UARTEN 0 +#define BM_UARTAPP_CTRL2_TXE 0x00000100 +#define BM_UARTAPP_CTRL2_RXE 0x00000200 +#define BM_UARTAPP_CTRL2_RTS 0x00000800 +#define BM_UARTAPP_CTRL2_RTSEN 0x00004000 +#define BM_UARTAPP_CTRL2_CTSEN 0x00008000 +#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000 +#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000 +#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000 + +#define HW_UARTAPP_LINECTRL 0x30 +#define BM_UARTAPP_LINECTRL_BRK 0x00000001 +#define BP_UARTAPP_LINECTRL_BRK 0 +#define BM_UARTAPP_LINECTRL_PEN 0x00000002 +#define BM_UARTAPP_LINECTRL_EPS 0x00000004 +#define BM_UARTAPP_LINECTRL_STP2 0x00000008 +#define BM_UARTAPP_LINECTRL_FEN 0x00000010 +#define BM_UARTAPP_LINECTRL_WLEN 0x00000060 +#define BP_UARTAPP_LINECTRL_WLEN 5 +#define BM_UARTAPP_LINECTRL_SPS 0x00000080 +#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00 +#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8 +#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000 +#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16 + +#define HW_UARTAPP_INTR 0x50 +#define BM_UARTAPP_INTR_CTSMIS 0x00000002 +#define BM_UARTAPP_INTR_RTIS 0x00000040 +#define BM_UARTAPP_INTR_CTSMIEN 0x00020000 +#define BM_UARTAPP_INTR_RXIEN 0x00100000 +#define BM_UARTAPP_INTR_RTIEN 0x00400000 + +#define HW_UARTAPP_DATA 0x60 + +#define HW_UARTAPP_STAT 0x70 +#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF +#define BP_UARTAPP_STAT_RXCOUNT 0 +#define BM_UARTAPP_STAT_FERR 0x00010000 +#define BM_UARTAPP_STAT_PERR 0x00020000 +#define BM_UARTAPP_STAT_BERR 0x00040000 +#define BM_UARTAPP_STAT_OERR 0x00080000 +#define BM_UARTAPP_STAT_RXFE 0x01000000 +#define BM_UARTAPP_STAT_TXFF 0x02000000 +#define BM_UARTAPP_STAT_TXFE 0x08000000 +#define BM_UARTAPP_STAT_CTS 0x10000000 + +#define HW_UARTAPP_VERSION 0x90 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h new file mode 100644 index 00000000000..b810deb552a --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h @@ -0,0 +1,268 @@ +/* + * stmp378x: UARTDBG register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000) +#define REGS_UARTDBG_PHYS 0x80070000 +#define REGS_UARTDBG_SIZE 0x2000 + +#define HW_UARTDBGDR 0x00000000 +#define BP_UARTDBGDR_UNAVAILABLE 16 +#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE) +#define BP_UARTDBGDR_RESERVED 12 +#define BM_UARTDBGDR_RESERVED 0x0000F000 +#define BF_UARTDBGDR_RESERVED(v) \ + (((v) << 12) & BM_UARTDBGDR_RESERVED) +#define BM_UARTDBGDR_OE 0x00000800 +#define BM_UARTDBGDR_BE 0x00000400 +#define BM_UARTDBGDR_PE 0x00000200 +#define BM_UARTDBGDR_FE 0x00000100 +#define BP_UARTDBGDR_DATA 0 +#define BM_UARTDBGDR_DATA 0x000000FF +#define BF_UARTDBGDR_DATA(v) \ + (((v) << 0) & BM_UARTDBGDR_DATA) +#define HW_UARTDBGRSR_ECR 0x00000004 +#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8 +#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE) +#define BP_UARTDBGRSR_ECR_EC 4 +#define BM_UARTDBGRSR_ECR_EC 0x000000F0 +#define BF_UARTDBGRSR_ECR_EC(v) \ + (((v) << 4) & BM_UARTDBGRSR_ECR_EC) +#define BM_UARTDBGRSR_ECR_OE 0x00000008 +#define BM_UARTDBGRSR_ECR_BE 0x00000004 +#define BM_UARTDBGRSR_ECR_PE 0x00000002 +#define BM_UARTDBGRSR_ECR_FE 0x00000001 +#define HW_UARTDBGFR 0x00000018 +#define BP_UARTDBGFR_UNAVAILABLE 16 +#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGFR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE) +#define BP_UARTDBGFR_RESERVED 9 +#define BM_UARTDBGFR_RESERVED 0x0000FE00 +#define BF_UARTDBGFR_RESERVED(v) \ + (((v) << 9) & BM_UARTDBGFR_RESERVED) +#define BM_UARTDBGFR_RI 0x00000100 +#define BM_UARTDBGFR_TXFE 0x00000080 +#define BM_UARTDBGFR_RXFF 0x00000040 +#define BM_UARTDBGFR_TXFF 0x00000020 +#define BM_UARTDBGFR_RXFE 0x00000010 +#define BM_UARTDBGFR_BUSY 0x00000008 +#define BM_UARTDBGFR_DCD 0x00000004 +#define BM_UARTDBGFR_DSR 0x00000002 +#define BM_UARTDBGFR_CTS 0x00000001 +#define HW_UARTDBGILPR 0x00000020 +#define BP_UARTDBGILPR_UNAVAILABLE 8 +#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGILPR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE) +#define BP_UARTDBGILPR_ILPDVSR 0 +#define BM_UARTDBGILPR_ILPDVSR 0x000000FF +#define BF_UARTDBGILPR_ILPDVSR(v) \ + (((v) << 0) & BM_UARTDBGILPR_ILPDVSR) +#define HW_UARTDBGIBRD 0x00000024 +#define BP_UARTDBGIBRD_UNAVAILABLE 16 +#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIBRD_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE) +#define BP_UARTDBGIBRD_BAUD_DIVINT 0 +#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF +#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \ + (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT) +#define HW_UARTDBGFBRD 0x00000028 +#define BP_UARTDBGFBRD_UNAVAILABLE 8 +#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGFBRD_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE) +#define BP_UARTDBGFBRD_RESERVED 6 +#define BM_UARTDBGFBRD_RESERVED 0x000000C0 +#define BF_UARTDBGFBRD_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGFBRD_RESERVED) +#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0 +#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F +#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \ + (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC) +#define HW_UARTDBGLCR_H 0x0000002c +#define BP_UARTDBGLCR_H_UNAVAILABLE 16 +#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE) +#define BP_UARTDBGLCR_H_RESERVED 8 +#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00 +#define BF_UARTDBGLCR_H_RESERVED(v) \ + (((v) << 8) & BM_UARTDBGLCR_H_RESERVED) +#define BM_UARTDBGLCR_H_SPS 0x00000080 +#define BP_UARTDBGLCR_H_WLEN 5 +#define BM_UARTDBGLCR_H_WLEN 0x00000060 +#define BF_UARTDBGLCR_H_WLEN(v) \ + (((v) << 5) & BM_UARTDBGLCR_H_WLEN) +#define BM_UARTDBGLCR_H_FEN 0x00000010 +#define BM_UARTDBGLCR_H_STP2 0x00000008 +#define BM_UARTDBGLCR_H_EPS 0x00000004 +#define BM_UARTDBGLCR_H_PEN 0x00000002 +#define BM_UARTDBGLCR_H_BRK 0x00000001 +#define HW_UARTDBGCR 0x00000030 +#define BP_UARTDBGCR_UNAVAILABLE 16 +#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGCR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE) +#define BM_UARTDBGCR_CTSEN 0x00008000 +#define BM_UARTDBGCR_RTSEN 0x00004000 +#define BM_UARTDBGCR_OUT2 0x00002000 +#define BM_UARTDBGCR_OUT1 0x00001000 +#define BM_UARTDBGCR_RTS 0x00000800 +#define BM_UARTDBGCR_DTR 0x00000400 +#define BM_UARTDBGCR_RXE 0x00000200 +#define BM_UARTDBGCR_TXE 0x00000100 +#define BM_UARTDBGCR_LBE 0x00000080 +#define BP_UARTDBGCR_RESERVED 3 +#define BM_UARTDBGCR_RESERVED 0x00000078 +#define BF_UARTDBGCR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGCR_RESERVED) +#define BM_UARTDBGCR_SIRLP 0x00000004 +#define BM_UARTDBGCR_SIREN 0x00000002 +#define BM_UARTDBGCR_UARTEN 0x00000001 +#define HW_UARTDBGIFLS 0x00000034 +#define BP_UARTDBGIFLS_UNAVAILABLE 16 +#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIFLS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE) +#define BP_UARTDBGIFLS_RESERVED 6 +#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0 +#define BF_UARTDBGIFLS_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGIFLS_RESERVED) +#define BP_UARTDBGIFLS_RXIFLSEL 3 +#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038 +#define BF_UARTDBGIFLS_RXIFLSEL(v) \ + (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL) +#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7 +#define BP_UARTDBGIFLS_TXIFLSEL 0 +#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007 +#define BF_UARTDBGIFLS_TXIFLSEL(v) \ + (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL) +#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7 +#define HW_UARTDBGIMSC 0x00000038 +#define BP_UARTDBGIMSC_UNAVAILABLE 16 +#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIMSC_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE) +#define BP_UARTDBGIMSC_RESERVED 11 +#define BM_UARTDBGIMSC_RESERVED 0x0000F800 +#define BF_UARTDBGIMSC_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGIMSC_RESERVED) +#define BM_UARTDBGIMSC_OEIM 0x00000400 +#define BM_UARTDBGIMSC_BEIM 0x00000200 +#define BM_UARTDBGIMSC_PEIM 0x00000100 +#define BM_UARTDBGIMSC_FEIM 0x00000080 +#define BM_UARTDBGIMSC_RTIM 0x00000040 +#define BM_UARTDBGIMSC_TXIM 0x00000020 +#define BM_UARTDBGIMSC_RXIM 0x00000010 +#define BM_UARTDBGIMSC_DSRMIM 0x00000008 +#define BM_UARTDBGIMSC_DCDMIM 0x00000004 +#define BM_UARTDBGIMSC_CTSMIM 0x00000002 +#define BM_UARTDBGIMSC_RIMIM 0x00000001 +#define HW_UARTDBGRIS 0x0000003c +#define BP_UARTDBGRIS_UNAVAILABLE 16 +#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGRIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE) +#define BP_UARTDBGRIS_RESERVED 11 +#define BM_UARTDBGRIS_RESERVED 0x0000F800 +#define BF_UARTDBGRIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGRIS_RESERVED) +#define BM_UARTDBGRIS_OERIS 0x00000400 +#define BM_UARTDBGRIS_BERIS 0x00000200 +#define BM_UARTDBGRIS_PERIS 0x00000100 +#define BM_UARTDBGRIS_FERIS 0x00000080 +#define BM_UARTDBGRIS_RTRIS 0x00000040 +#define BM_UARTDBGRIS_TXRIS 0x00000020 +#define BM_UARTDBGRIS_RXRIS 0x00000010 +#define BM_UARTDBGRIS_DSRRMIS 0x00000008 +#define BM_UARTDBGRIS_DCDRMIS 0x00000004 +#define BM_UARTDBGRIS_CTSRMIS 0x00000002 +#define BM_UARTDBGRIS_RIRMIS 0x00000001 +#define HW_UARTDBGMIS 0x00000040 +#define BP_UARTDBGMIS_UNAVAILABLE 16 +#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGMIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE) +#define BP_UARTDBGMIS_RESERVED 11 +#define BM_UARTDBGMIS_RESERVED 0x0000F800 +#define BF_UARTDBGMIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGMIS_RESERVED) +#define BM_UARTDBGMIS_OEMIS 0x00000400 +#define BM_UARTDBGMIS_BEMIS 0x00000200 +#define BM_UARTDBGMIS_PEMIS 0x00000100 +#define BM_UARTDBGMIS_FEMIS 0x00000080 +#define BM_UARTDBGMIS_RTMIS 0x00000040 +#define BM_UARTDBGMIS_TXMIS 0x00000020 +#define BM_UARTDBGMIS_RXMIS 0x00000010 +#define BM_UARTDBGMIS_DSRMMIS 0x00000008 +#define BM_UARTDBGMIS_DCDMMIS 0x00000004 +#define BM_UARTDBGMIS_CTSMMIS 0x00000002 +#define BM_UARTDBGMIS_RIMMIS 0x00000001 +#define HW_UARTDBGICR 0x00000044 +#define BP_UARTDBGICR_UNAVAILABLE 16 +#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGICR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE) +#define BP_UARTDBGICR_RESERVED 11 +#define BM_UARTDBGICR_RESERVED 0x0000F800 +#define BF_UARTDBGICR_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGICR_RESERVED) +#define BM_UARTDBGICR_OEIC 0x00000400 +#define BM_UARTDBGICR_BEIC 0x00000200 +#define BM_UARTDBGICR_PEIC 0x00000100 +#define BM_UARTDBGICR_FEIC 0x00000080 +#define BM_UARTDBGICR_RTIC 0x00000040 +#define BM_UARTDBGICR_TXIC 0x00000020 +#define BM_UARTDBGICR_RXIC 0x00000010 +#define BM_UARTDBGICR_DSRMIC 0x00000008 +#define BM_UARTDBGICR_DCDMIC 0x00000004 +#define BM_UARTDBGICR_CTSMIC 0x00000002 +#define BM_UARTDBGICR_RIMIC 0x00000001 +#define HW_UARTDBGDMACR 0x00000048 +#define BP_UARTDBGDMACR_UNAVAILABLE 16 +#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDMACR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE) +#define BP_UARTDBGDMACR_RESERVED 3 +#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8 +#define BF_UARTDBGDMACR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGDMACR_RESERVED) +#define BM_UARTDBGDMACR_DMAONERR 0x00000004 +#define BM_UARTDBGDMACR_TXDMAE 0x00000002 +#define BM_UARTDBGDMACR_RXDMAE 0x00000001 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h new file mode 100644 index 00000000000..25112c1aa60 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h @@ -0,0 +1,40 @@ +/* + * stmp378x: USBCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTRL_PHYS 0x80080000 +#define REGS_USBCTRL_SIZE 0x2000 + +#define HW_USBCTRL_USBCMD 0x140 +#define BM_USBCTRL_USBCMD_RS 0x00000001 +#define BP_USBCTRL_USBCMD_RS 0 +#define BM_USBCTRL_USBCMD_RST 0x00000002 + +#define HW_USBCTRL_USBINTR 0x148 +#define BM_USBCTRL_USBINTR_UE 0x00000001 +#define BP_USBCTRL_USBINTR_UE 0 + +#define HW_USBCTRL_PORTSC1 0x184 +#define BM_USBCTRL_PORTSC1_PHCD 0x00800000 + +#define HW_USBCTRL_OTGSC 0x1A4 +#define BM_USBCTRL_OTGSC_ID 0x00000100 +#define BM_USBCTRL_OTGSC_IDIS 0x00010000 +#define BM_USBCTRL_OTGSC_IDIE 0x01000000 diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h new file mode 100644 index 00000000000..11f3b732dc9 --- /dev/null +++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h @@ -0,0 +1,37 @@ +/* + * stmp378x: USBPHY register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000) +#define REGS_USBPHY_PHYS 0x8007C000 +#define REGS_USBPHY_SIZE 0x2000 + +#define HW_USBPHY_PWD 0x0 + +#define HW_USBPHY_CTRL 0x30 +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002 +#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010 +#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 +#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 +#define BM_USBPHY_CTRL_CLKGATE 0x40000000 +#define BM_USBPHY_CTRL_SFTRST 0x80000000 + +#define HW_USBPHY_STATUS 0x40 +#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040 +#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100 diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c new file mode 100644 index 00000000000..ddd49a760fd --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x.c @@ -0,0 +1,299 @@ +/* + * Freescale STMP378X platform support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> + +#include <asm/dma.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/pins.h> +#include <mach/pinmux.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/system.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/regs-icoll.h> +#include <mach/regs-apbh.h> +#include <mach/regs-apbx.h> +#include <mach/regs-pxp.h> +#include <mach/regs-i2c.h> + +#include "stmp378x.h" +/* + * IRQ handling + */ +static void stmp378x_ack_irq(unsigned int irq) +{ + /* Tell ICOLL to release IRQ line */ + __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR); + + /* ACK current interrupt */ + __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */, + REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + +static void stmp378x_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE, + REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10); +} + +static void stmp378x_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE, + REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10); +} + +static struct irq_chip stmp378x_chip = { + .ack = stmp378x_ack_irq, + .mask = stmp378x_mask_irq, + .unmask = stmp378x_unmask_irq, +}; + +void __init stmp378x_init_irq(void) +{ + stmp3xxx_init_irq(&stmp378x_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + void __iomem *c1, *c2; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c1 = REGS_APBH_BASE + HW_APBH_CTRL1; + c2 = REGS_APBH_BASE + HW_APBH_CTRL2; + break; + + case STMP3XXX_BUS_APBX: + c1 = REGS_APBX_BASE + HW_APBX_CTRL1; + c2 = REGS_APBX_BASE + HW_APBX_CTRL2; + break; + + default: + return; + } + stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1); + stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + void __iomem *c1, *c2; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c1 = REGS_APBH_BASE + HW_APBH_CTRL1; + c2 = REGS_APBH_BASE + HW_APBH_CTRL2; + break; + + case STMP3XXX_BUS_APBX: + c1 = REGS_APBX_BASE + HW_APBX_CTRL1; + c2 = REGS_APBX_BASE + HW_APBX_CTRL2; + break; + + default: + return; + } + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1); + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int r = 0; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + + case STMP3XXX_BUS_APBX: + r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + void __iomem *c0; + u32 mask; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c0 = REGS_APBH_BASE + HW_APBH_CTRL0; + mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL; + break; + case STMP3XXX_BUS_APBX: + c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL; + mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL; + break; + default: + return; + } + + /* Reset channel and wait for it to complete */ + stmp3xxx_setl(mask, c0); + while (__raw_readl(c0) & mask) + cpu_relax(); +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + u32 mask = 1 << chbit; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze); + +void stmp3xxx_arch_dma_unfreeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + u32 mask = 1 << chbit; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze); + +/* + * The registers are all very closely mapped, so we might as well map them all + * with a single mapping + * + * Logical Physical + * f0000000 80000000 On-chip registers + * f1000000 00000000 32k on-chip SRAM + */ + +static struct map_desc stmp378x_io_desc[] __initdata = { + { + .virtual = (u32)STMP3XXX_REGS_BASE, + .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE), + .length = STMP3XXX_REGS_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = (u32)STMP3XXX_OCRAM_BASE, + .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE), + .length = STMP3XXX_OCRAM_SIZE, + .type = MT_DEVICE, + }, +}; + + +static u64 common_dmamask = DMA_BIT_MASK(32); + +/* + * devices that are present only on stmp378x, not on all 3xxx boards: + * PxP + * I2C + */ +static struct resource pxp_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_PXP_PHYS, + .end = REGS_PXP_PHYS + REGS_PXP_SIZE, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_PXP, + .end = IRQ_PXP, + }, +}; + +struct platform_device stmp378x_pxp = { + .name = "stmp3xxx-pxp", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pxp_resource), + .resource = pxp_resource, +}; + +static struct resource i2c_resources[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_I2C_ERROR, + .end = IRQ_I2C_ERROR, + }, { + .flags = IORESOURCE_MEM, + .start = REGS_I2C_PHYS, + .end = REGS_I2C_PHYS + REGS_I2C_SIZE, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX), + }, +}; + +struct platform_device stmp378x_i2c = { + .name = "i2c_stmp3xxx", + .id = 0, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = i2c_resources, + .num_resources = ARRAY_SIZE(i2c_resources), +}; + +void __init stmp378x_map_io(void) +{ + iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc)); +} diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h new file mode 100644 index 00000000000..0dc15b3c891 --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x.h @@ -0,0 +1,25 @@ +/* + * Freescale STMP37XX/STMP378X internal functions and data declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP378X_H +#define __MACH_STMP378X_H + +void stmp378x_map_io(void); +void stmp378x_init_irq(void); + +extern struct platform_device stmp378x_pxp, stmp378x_i2c; +#endif /* __MACH_STMP378X_COMMON_H */ diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c new file mode 100644 index 00000000000..90d8fe6f10f --- /dev/null +++ b/arch/arm/mach-stmp378x/stmp378x_devb.c @@ -0,0 +1,334 @@ +/* + * Freescale STMP378X development board support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/spi/spi.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pins.h> +#include <mach/pinmux.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/mmc.h> +#include <mach/gpmi.h> + +#include "stmp378x.h" + +static struct platform_device *devices[] = { + &stmp3xxx_dbguart, + &stmp3xxx_appuart, + &stmp3xxx_watchdog, + &stmp3xxx_touchscreen, + &stmp3xxx_rtc, + &stmp3xxx_keyboard, + &stmp3xxx_framebuffer, + &stmp3xxx_backlight, + &stmp3xxx_rotdec, + &stmp3xxx_persistent, + &stmp3xxx_dcp_bootstream, + &stmp3xxx_dcp, + &stmp3xxx_battery, + &stmp378x_pxp, + &stmp378x_i2c, +}; + +static struct pin_desc i2c_pins_desc[] = { + { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, +}; + +static struct pin_group i2c_pins = { + .pins = i2c_pins_desc, + .nr_pins = ARRAY_SIZE(i2c_pins_desc), +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + +static struct pin_desc appuart_pins_0[] = { + { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +}; + +static struct pin_desc appuart_pins_1[] = { +#if 0 /* enable these when second appuart will be connected */ + { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +#endif +}; + +static struct pin_desc mmc_pins_desc[] = { + { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 }, + { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 }, + { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 }, +}; + +static struct pin_group mmc_pins = { + .pins = mmc_pins_desc, + .nr_pins = ARRAY_SIZE(mmc_pins_desc), +}; + +static int stmp3xxxmmc_get_wp(void) +{ + return gpio_get_value(PINID_PWM4); +} + +static int stmp3xxxmmc_hw_init_ssp1(void) +{ + int ret; + + ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc"); + if (ret) + goto out; + + /* Configure write protect GPIO pin */ + ret = gpio_request(PINID_PWM4, "mmc wp"); + if (ret) + goto out_wp; + + gpio_direction_input(PINID_PWM4); + + /* Configure POWER pin as gpio to drive power to MMC slot */ + ret = gpio_request(PINID_PWM3, "mmc power"); + if (ret) + goto out_power; + + gpio_direction_output(PINID_PWM3, 0); + mdelay(100); + + return 0; + +out_power: + gpio_free(PINID_PWM4); +out_wp: + stmp3xxx_release_pin_group(&mmc_pins, "mmc"); +out: + return ret; +} + +static void stmp3xxxmmc_hw_release_ssp1(void) +{ + gpio_free(PINID_PWM3); + gpio_free(PINID_PWM4); + stmp3xxx_release_pin_group(&mmc_pins, "mmc"); +} + +static void stmp3xxxmmc_cmd_pullup_ssp1(int enable) +{ + stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc"); +} + +static unsigned long +stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz) +{ + struct clk *ssp, *parent; + char *p; + long r; + + ssp = clk_get(NULL, "ssp"); + + /* using SSP1, no timeout, clock rate 1 */ + writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) | + BF(0xFFFF, SSP_TIMING_TIMEOUT), + base + HW_SSP_TIMING); + + p = (hz > 1000000) ? "io" : "osc_24M"; + parent = clk_get(NULL, p); + clk_set_parent(ssp, parent); + r = clk_set_rate(ssp, 2 * hz / 1000); + clk_put(parent); + clk_put(ssp); + + return hz; +} + +static struct stmp3xxxmmc_platform_data mmc_data = { + .hw_init = stmp3xxxmmc_hw_init_ssp1, + .hw_release = stmp3xxxmmc_hw_release_ssp1, + .get_wp = stmp3xxxmmc_get_wp, + .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1, + .setclock = stmp3xxxmmc_setclock_ssp1, +}; + + +static struct pin_group appuart_pins[] = { + [0] = { + .pins = appuart_pins_0, + .nr_pins = ARRAY_SIZE(appuart_pins_0), + }, + [1] = { + .pins = appuart_pins_1, + .nr_pins = ARRAY_SIZE(appuart_pins_1), + }, +}; + +static struct pin_desc ssp1_pins_desc[] = { + { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, }, + { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, + { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, + { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, }, +}; + +static struct pin_desc ssp2_pins_desc[] = { + { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, }, + { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, + { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, + { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, }, +}; + +static struct pin_group ssp1_pins = { + .pins = ssp1_pins_desc, + .nr_pins = ARRAY_SIZE(ssp1_pins_desc), +}; + +static struct pin_group ssp2_pins = { + .pins = ssp1_pins_desc, + .nr_pins = ARRAY_SIZE(ssp2_pins_desc), +}; + +static struct pin_desc gpmi_pins_desc[] = { + { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 }, + { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, + { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 }, +}; + +static struct pin_group gpmi_pins = { + .pins = gpmi_pins_desc, + .nr_pins = ARRAY_SIZE(gpmi_pins_desc), +}; + +static struct mtd_partition gpmi_partitions[] = { + [0] = { + .name = "boot", + .size = 10 * SZ_1M, + .offset = 0, + }, + [1] = { + .name = "data", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct gpmi_platform_data gpmi_data = { + .pins = &gpmi_pins, + .nr_parts = ARRAY_SIZE(gpmi_partitions), + .parts = gpmi_partitions, + .part_types = { "cmdline", NULL }, +}; + +static struct spi_board_info spi_board_info[] __initdata = { +#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) + { + .modalias = "enc28j60", + .max_speed_hz = 6 * 1000 * 1000, + .bus_num = 1, + .chip_select = 0, + .platform_data = NULL, + }, +#endif +}; + +static void __init stmp378x_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* init stmp3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + stmp3xxx_appuart.dev.platform_data = appuart_pins; + stmp3xxx_mmc.dev.platform_data = &mmc_data; + stmp3xxx_gpmi.dev.platform_data = &gpmi_data; + stmp3xxx_spi1.dev.platform_data = &ssp1_pins; + stmp3xxx_spi2.dev.platform_data = &ssp2_pins; + stmp378x_i2c.dev.platform_data = &i2c_pins; + + /* register spi devices */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* add board's devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* add devices selected by command line ssp1= and ssp2= options */ + stmp3xxx_ssp1_device_register(); + stmp3xxx_ssp2_device_register(); +} + +MACHINE_START(STMP378X, "STMP378X") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp378x_map_io, + .init_irq = stmp378x_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp378x_devb_init, +MACHINE_END diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile new file mode 100644 index 00000000000..57deffd09fb --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o +obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot new file mode 100644 index 00000000000..1568ad404d5 --- /dev/null +++ b/arch/arm/mach-stmp37xx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x40008000 +params_phys-y := 0x40000100 +initrd_phys-y := 0x40800000 diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S new file mode 100644 index 00000000000..fed2787b6c3 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S @@ -0,0 +1,37 @@ +/* + * Low-level IRQ helper macros for Freescale STMP37XX + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + mov \base, #0xf0000000 @ vm address of IRQ controller + ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT + cmp \irqnr, #0x3f + movne \irqstat, #0 @ Ack this IRQ + strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR + moveqs \irqnr, #0 @ Zero flag set for no IRQ + + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h new file mode 100644 index 00000000000..98f12938550 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h @@ -0,0 +1,99 @@ +/* + * Freescale STMP37XX interrupts + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef _ASM_ARCH_IRQS_H +#define _ASM_ARCH_IRQS_H + +#define IRQ_DEBUG_UART 0 +#define IRQ_COMMS_RX 1 +#define IRQ_COMMS_TX 1 +#define IRQ_SSP2_ERROR 2 +#define IRQ_VDD5V 3 +#define IRQ_HEADPHONE_SHORT 4 +#define IRQ_DAC_DMA 5 +#define IRQ_DAC_ERROR 6 +#define IRQ_ADC_DMA 7 +#define IRQ_ADC_ERROR 8 +#define IRQ_SPDIF_DMA 9 +#define IRQ_SAIF2_DMA 9 +#define IRQ_SPDIF_ERROR 10 +#define IRQ_SAIF1_IRQ 10 +#define IRQ_SAIF2_IRQ 10 +#define IRQ_USB_CTRL 11 +#define IRQ_USB_WAKEUP 12 +#define IRQ_GPMI_DMA 13 +#define IRQ_SSP1_DMA 14 +#define IRQ_SSP_ERROR 15 +#define IRQ_GPIO0 16 +#define IRQ_GPIO1 17 +#define IRQ_GPIO2 18 +#define IRQ_SAIF1_DMA 19 +#define IRQ_SSP2_DMA 20 +#define IRQ_ECC8_IRQ 21 +#define IRQ_RTC_ALARM 22 +#define IRQ_UARTAPP_TX_DMA 23 +#define IRQ_UARTAPP_INTERNAL 24 +#define IRQ_UARTAPP_RX_DMA 25 +#define IRQ_I2C_DMA 26 +#define IRQ_I2C_ERROR 27 +#define IRQ_TIMER0 28 +#define IRQ_TIMER1 29 +#define IRQ_TIMER2 30 +#define IRQ_TIMER3 31 +#define IRQ_BATT_BRNOUT 32 +#define IRQ_VDDD_BRNOUT 33 +#define IRQ_VDDIO_BRNOUT 34 +#define IRQ_VDD18_BRNOUT 35 +#define IRQ_TOUCH_DETECT 36 +#define IRQ_LRADC_CH0 37 +#define IRQ_LRADC_CH1 38 +#define IRQ_LRADC_CH2 39 +#define IRQ_LRADC_CH3 40 +#define IRQ_LRADC_CH4 41 +#define IRQ_LRADC_CH5 42 +#define IRQ_LRADC_CH6 43 +#define IRQ_LRADC_CH7 44 +#define IRQ_LCDIF_DMA 45 +#define IRQ_LCDIF_ERROR 46 +#define IRQ_DIGCTL_DEBUG_TRAP 47 +#define IRQ_RTC_1MSEC 48 +#define IRQ_DRI_DMA 49 +#define IRQ_DRI_ATTENTION 50 +#define IRQ_GPMI_ATTENTION 51 +#define IRQ_IR 52 +#define IRQ_DCP_VMI 53 +#define IRQ_DCP 54 +#define IRQ_RESERVED_55 55 +#define IRQ_RESERVED_56 56 +#define IRQ_RESERVED_57 57 +#define IRQ_RESERVED_58 58 +#define IRQ_RESERVED_59 59 +#define SW_IRQ_60 60 +#define SW_IRQ_61 61 +#define SW_IRQ_62 62 +#define SW_IRQ_63 63 + +#define NR_REAL_IRQS 64 +#define NR_IRQS (NR_REAL_IRQS + 32 * 3) + +/* TIMER and BRNOUT are FIQ capable */ +#define FIQ_START IRQ_TIMER0 + +/* Hard disk IRQ is a GPMI attention IRQ */ +#define IRQ_HARDDISK IRQ_GPMI_ATTENTION + +#endif /* _ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h new file mode 100644 index 00000000000..d56de0c471d --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/pins.h @@ -0,0 +1,147 @@ +/* + * Freescale STMP37XX SoC pin multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_PINS_H +#define __ASM_ARCH_PINS_H + +/* + * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware + * interface this pin belongs to. + */ + +/* Bank 0 */ +#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0) +#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1) +#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2) +#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3) +#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4) +#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5) +#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6) +#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7) +#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8) +#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9) +#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10) +#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11) +#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12) +#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13) +#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14) +#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15) +#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16) +#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17) +#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18) +#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19) +#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20) +#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21) +#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22) +#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23) +#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24) +#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25) +#define PINID_UART2_CTS STMP3XXX_PINID(0, 26) +#define PINID_UART2_RTS STMP3XXX_PINID(0, 27) +#define PINID_UART2_RX STMP3XXX_PINID(0, 28) +#define PINID_UART2_TX STMP3XXX_PINID(0, 29) + +/* Bank 1 */ +#define PINID_LCD_D00 STMP3XXX_PINID(1, 0) +#define PINID_LCD_D01 STMP3XXX_PINID(1, 1) +#define PINID_LCD_D02 STMP3XXX_PINID(1, 2) +#define PINID_LCD_D03 STMP3XXX_PINID(1, 3) +#define PINID_LCD_D04 STMP3XXX_PINID(1, 4) +#define PINID_LCD_D05 STMP3XXX_PINID(1, 5) +#define PINID_LCD_D06 STMP3XXX_PINID(1, 6) +#define PINID_LCD_D07 STMP3XXX_PINID(1, 7) +#define PINID_LCD_D08 STMP3XXX_PINID(1, 8) +#define PINID_LCD_D09 STMP3XXX_PINID(1, 9) +#define PINID_LCD_D10 STMP3XXX_PINID(1, 10) +#define PINID_LCD_D11 STMP3XXX_PINID(1, 11) +#define PINID_LCD_D12 STMP3XXX_PINID(1, 12) +#define PINID_LCD_D13 STMP3XXX_PINID(1, 13) +#define PINID_LCD_D14 STMP3XXX_PINID(1, 14) +#define PINID_LCD_D15 STMP3XXX_PINID(1, 15) +#define PINID_LCD_RESET STMP3XXX_PINID(1, 16) +#define PINID_LCD_RS STMP3XXX_PINID(1, 17) +#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18) +#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19) +#define PINID_LCD_CS STMP3XXX_PINID(1, 20) +#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21) +#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22) +#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23) +#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24) +#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25) +#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26) +#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27) +#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28) + +/* Bank 2 */ +#define PINID_PWM0 STMP3XXX_PINID(2, 0) +#define PINID_PWM1 STMP3XXX_PINID(2, 1) +#define PINID_PWM2 STMP3XXX_PINID(2, 2) +#define PINID_PWM3 STMP3XXX_PINID(2, 3) +#define PINID_PWM4 STMP3XXX_PINID(2, 4) +#define PINID_I2C_SCL STMP3XXX_PINID(2, 5) +#define PINID_I2C_SDA STMP3XXX_PINID(2, 6) +#define PINID_ROTTARYA STMP3XXX_PINID(2, 7) +#define PINID_ROTTARYB STMP3XXX_PINID(2, 8) +#define PINID_EMI_CKE STMP3XXX_PINID(2, 9) +#define PINID_EMI_RASN STMP3XXX_PINID(2, 10) +#define PINID_EMI_CASN STMP3XXX_PINID(2, 11) +#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12) +#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13) +#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14) +#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15) +#define PINID_EMI_A00 STMP3XXX_PINID(2, 16) +#define PINID_EMI_A01 STMP3XXX_PINID(2, 17) +#define PINID_EMI_A02 STMP3XXX_PINID(2, 18) +#define PINID_EMI_A03 STMP3XXX_PINID(2, 19) +#define PINID_EMI_A04 STMP3XXX_PINID(2, 20) +#define PINID_EMI_A05 STMP3XXX_PINID(2, 21) +#define PINID_EMI_A06 STMP3XXX_PINID(2, 22) +#define PINID_EMI_A07 STMP3XXX_PINID(2, 23) +#define PINID_EMI_A08 STMP3XXX_PINID(2, 24) +#define PINID_EMI_A09 STMP3XXX_PINID(2, 25) +#define PINID_EMI_A10 STMP3XXX_PINID(2, 26) +#define PINID_EMI_A11 STMP3XXX_PINID(2, 27) +#define PINID_EMI_A12 STMP3XXX_PINID(2, 28) +#define PINID_EMI_A13 STMP3XXX_PINID(2, 29) +#define PINID_EMI_A14 STMP3XXX_PINID(2, 30) +#define PINID_EMI_WEN STMP3XXX_PINID(2, 31) + +/* Bank 3 */ +#define PINID_EMI_D00 STMP3XXX_PINID(3, 0) +#define PINID_EMI_D01 STMP3XXX_PINID(3, 1) +#define PINID_EMI_D02 STMP3XXX_PINID(3, 2) +#define PINID_EMI_D03 STMP3XXX_PINID(3, 3) +#define PINID_EMI_D04 STMP3XXX_PINID(3, 4) +#define PINID_EMI_D05 STMP3XXX_PINID(3, 5) +#define PINID_EMI_D06 STMP3XXX_PINID(3, 6) +#define PINID_EMI_D07 STMP3XXX_PINID(3, 7) +#define PINID_EMI_D08 STMP3XXX_PINID(3, 8) +#define PINID_EMI_D09 STMP3XXX_PINID(3, 9) +#define PINID_EMI_D10 STMP3XXX_PINID(3, 10) +#define PINID_EMI_D11 STMP3XXX_PINID(3, 11) +#define PINID_EMI_D12 STMP3XXX_PINID(3, 12) +#define PINID_EMI_D13 STMP3XXX_PINID(3, 13) +#define PINID_EMI_D14 STMP3XXX_PINID(3, 14) +#define PINID_EMI_D15 STMP3XXX_PINID(3, 15) +#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16) +#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17) +#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18) +#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19) +#define PINID_EMI_CLK STMP3XXX_PINID(3, 20) +#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21) + +#endif /* __ASM_ARCH_PINS_H */ diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h new file mode 100644 index 00000000000..a323aa9a21f --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h @@ -0,0 +1,97 @@ +/* + * stmp37xx: APBH register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBH +#define _MACH_REGS_APBH + +#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000) + +#define HW_APBH_CTRL0 0x0 +#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBH_CTRL0_RESET_CHANNEL 16 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_SFTRST 0x80000000 + +#define HW_APBH_CTRL1 0x10 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 +#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0 + +#define HW_APBH_DEVSEL 0x20 + +#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBH_CHn_NXTCMDAR 0x50 + +#define BM_APBH_CHn_CMD_MODE 0x00000003 +#define BP_APBH_CHn_CMD_MODE 0x00000001 +#define BV_APBH_CHn_CMD_MODE_NOOP 0 +#define BV_APBH_CHn_CMD_MODE_WRITE 1 +#define BV_APBH_CHn_CMD_MODE_READ 2 +#define BV_APBH_CHn_CMD_MODE_SENSE 3 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBH_CHn_CMD_XFER_COUNT 16 + +#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBH_CHn_SEMA 0x80 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBH_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h new file mode 100644 index 00000000000..6d080cd5b70 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h @@ -0,0 +1,113 @@ +/* + * stmp37xx: APBX register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_APBX +#define _MACH_REGS_APBX + +#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000) + +#define HW_APBX_CTRL0 0x0 +#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000 +#define BP_APBX_CTRL0_RESET_CHANNEL 16 +#define BM_APBX_CTRL0_CLKGATE 0x40000000 +#define BM_APBX_CTRL0_SFTRST 0x80000000 + +#define HW_APBX_CTRL1 0x10 + +#define HW_APBX_DEVSEL 0x20 + +#define HW_APBX_CH0_NXTCMDAR (0x50 + 0 * 0x70) +#define HW_APBX_CH1_NXTCMDAR (0x50 + 1 * 0x70) +#define HW_APBX_CH2_NXTCMDAR (0x50 + 2 * 0x70) +#define HW_APBX_CH3_NXTCMDAR (0x50 + 3 * 0x70) +#define HW_APBX_CH4_NXTCMDAR (0x50 + 4 * 0x70) +#define HW_APBX_CH5_NXTCMDAR (0x50 + 5 * 0x70) +#define HW_APBX_CH6_NXTCMDAR (0x50 + 6 * 0x70) +#define HW_APBX_CH7_NXTCMDAR (0x50 + 7 * 0x70) +#define HW_APBX_CH8_NXTCMDAR (0x50 + 8 * 0x70) +#define HW_APBX_CH9_NXTCMDAR (0x50 + 9 * 0x70) +#define HW_APBX_CH10_NXTCMDAR (0x50 + 10 * 0x70) +#define HW_APBX_CH11_NXTCMDAR (0x50 + 11 * 0x70) +#define HW_APBX_CH12_NXTCMDAR (0x50 + 12 * 0x70) +#define HW_APBX_CH13_NXTCMDAR (0x50 + 13 * 0x70) +#define HW_APBX_CH14_NXTCMDAR (0x50 + 14 * 0x70) +#define HW_APBX_CH15_NXTCMDAR (0x50 + 15 * 0x70) + +#define HW_APBX_CHn_NXTCMDAR 0x50 +#define BM_APBX_CHn_CMD_MODE 0x00000003 +#define BP_APBX_CHn_CMD_MODE 0x00000001 +#define BV_APBX_CHn_CMD_MODE_NOOP 0 +#define BV_APBX_CHn_CMD_MODE_WRITE 1 +#define BV_APBX_CHn_CMD_MODE_READ 2 +#define BV_APBX_CHn_CMD_MODE_SENSE 3 +#define BM_APBX_CHn_CMD_COMMAND 0x00000003 +#define BP_APBX_CHn_CMD_COMMAND 0 +#define BM_APBX_CHn_CMD_CHAIN 0x00000004 +#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000 +#define BP_APBX_CHn_CMD_CMDWORDS 12 +#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BP_APBX_CHn_CMD_XFER_COUNT 16 + +#define HW_APBX_CH0_BAR (0x70 + 0 * 0x70) +#define HW_APBX_CH1_BAR (0x70 + 1 * 0x70) +#define HW_APBX_CH2_BAR (0x70 + 2 * 0x70) +#define HW_APBX_CH3_BAR (0x70 + 3 * 0x70) +#define HW_APBX_CH4_BAR (0x70 + 4 * 0x70) +#define HW_APBX_CH5_BAR (0x70 + 5 * 0x70) +#define HW_APBX_CH6_BAR (0x70 + 6 * 0x70) +#define HW_APBX_CH7_BAR (0x70 + 7 * 0x70) +#define HW_APBX_CH8_BAR (0x70 + 8 * 0x70) +#define HW_APBX_CH9_BAR (0x70 + 9 * 0x70) +#define HW_APBX_CH10_BAR (0x70 + 10 * 0x70) +#define HW_APBX_CH11_BAR (0x70 + 11 * 0x70) +#define HW_APBX_CH12_BAR (0x70 + 12 * 0x70) +#define HW_APBX_CH13_BAR (0x70 + 13 * 0x70) +#define HW_APBX_CH14_BAR (0x70 + 14 * 0x70) +#define HW_APBX_CH15_BAR (0x70 + 15 * 0x70) + +#define HW_APBX_CHn_BAR 0x70 + +#define HW_APBX_CH0_SEMA (0x80 + 0 * 0x70) +#define HW_APBX_CH1_SEMA (0x80 + 1 * 0x70) +#define HW_APBX_CH2_SEMA (0x80 + 2 * 0x70) +#define HW_APBX_CH3_SEMA (0x80 + 3 * 0x70) +#define HW_APBX_CH4_SEMA (0x80 + 4 * 0x70) +#define HW_APBX_CH5_SEMA (0x80 + 5 * 0x70) +#define HW_APBX_CH6_SEMA (0x80 + 6 * 0x70) +#define HW_APBX_CH7_SEMA (0x80 + 7 * 0x70) +#define HW_APBX_CH8_SEMA (0x80 + 8 * 0x70) +#define HW_APBX_CH9_SEMA (0x80 + 9 * 0x70) +#define HW_APBX_CH10_SEMA (0x80 + 10 * 0x70) +#define HW_APBX_CH11_SEMA (0x80 + 11 * 0x70) +#define HW_APBX_CH12_SEMA (0x80 + 12 * 0x70) +#define HW_APBX_CH13_SEMA (0x80 + 13 * 0x70) +#define HW_APBX_CH14_SEMA (0x80 + 14 * 0x70) +#define HW_APBX_CH15_SEMA (0x80 + 15 * 0x70) + +#define HW_APBX_CHn_SEMA 0x80 +#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000 +#define BP_APBX_CHn_SEMA_PHORE 16 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h new file mode 100644 index 00000000000..3b511f947a5 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h @@ -0,0 +1,61 @@ +/* + * stmp37xx: AUDIOIN register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000) + +#define HW_AUDIOIN_CTRL 0x0 +#define BM_AUDIOIN_CTRL_RUN 0x00000001 +#define BP_AUDIOIN_CTRL_RUN 0 +#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020 +#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOIN_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOIN_STAT 0x10 + +#define HW_AUDIOIN_ADCSRR 0x20 + +#define HW_AUDIOIN_ADCVOLUME 0x30 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF +#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0 +#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000 +#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16 + +#define HW_AUDIOIN_ADCDEBUG 0x40 + +#define HW_AUDIOIN_ADCVOL 0x50 +#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F +#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0 +#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030 +#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4 +#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00 +#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8 +#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000 +#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12 +#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000 + +#define HW_AUDIOIN_MICLINE 0x60 + +#define HW_AUDIOIN_ANACLKCTRL 0x70 +#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOIN_DATA 0x80 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h new file mode 100644 index 00000000000..ca1942b8a3e --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h @@ -0,0 +1,111 @@ +/* + * stmp37xx: AUDIOOUT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000) + +#define HW_AUDIOOUT_CTRL 0x0 +#define BM_AUDIOOUT_CTRL_RUN 0x00000001 +#define BP_AUDIOOUT_CTRL_RUN 0 +#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002 +#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004 +#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008 +#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040 +#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000 +#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000 + +#define HW_AUDIOOUT_STAT 0x10 + +#define HW_AUDIOOUT_DACSRR 0x20 +#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF +#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0 +#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000 +#define BP_AUDIOOUT_DACSRR_SRC_INT 16 +#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000 +#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24 +#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000 +#define BP_AUDIOOUT_DACSRR_BASEMULT 28 + +#define HW_AUDIOOUT_DACVOLUME 0x30 +#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100 +#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000 +#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_DACDEBUG 0x40 + +#define HW_AUDIOOUT_HPVOL 0x50 +#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000 +#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000 + +#define HW_AUDIOOUT_PWRDN 0x70 +#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001 +#define BP_AUDIOOUT_PWRDN_HEADPHONE 0 +#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010 +#define BM_AUDIOOUT_PWRDN_ADC 0x00000100 +#define BM_AUDIOOUT_PWRDN_DAC 0x00001000 +#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000 +#define BM_AUDIOOUT_PWRDN_LINEOUT 0x01000000 + +#define HW_AUDIOOUT_REFCTRL 0x80 +#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0 +#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4 +#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00 +#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8 +#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000 +#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000 +#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000 +#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16 +#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000 +#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000 +#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20 +#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000 +#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000 + +#define HW_AUDIOOUT_ANACTRL 0x90 +#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010 +#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020 + +#define HW_AUDIOOUT_TEST 0xA0 +#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000 +#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22 + +#define HW_AUDIOOUT_BISTCTRL 0xB0 + +#define HW_AUDIOOUT_BISTSTAT0 0xC0 + +#define HW_AUDIOOUT_BISTSTAT1 0xD0 + +#define HW_AUDIOOUT_ANACLKCTRL 0xE0 +#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000 + +#define HW_AUDIOOUT_DATA 0xF0 + +#define HW_AUDIOOUT_LINEOUTCTRL 0x100 +#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0x0000001F +#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0 +#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 0x00001F00 +#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 8 +#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 0x00007000 +#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 12 +#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 0x00F00000 +#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 20 +#define BM_AUDIOOUT_LINEOUTCTRL_MUTE 0x01000000 +#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD 0x02000000 + +#define HW_AUDIOOUT_VERSION 0x200 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h new file mode 100644 index 00000000000..47f5c92fdaf --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h @@ -0,0 +1,72 @@ +/* + * stmp37xx: CLKCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_CLKCTRL +#define _MACH_REGS_CLKCTRL + +#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000) + +#define HW_CLKCTRL_PLLCTRL0 0x0 +#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000 + +#define HW_CLKCTRL_CPU 0x20 +#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F +#define BP_CLKCTRL_CPU_DIV_CPU 0 + +#define HW_CLKCTRL_HBUS 0x30 +#define BM_CLKCTRL_HBUS_DIV 0x0000001F +#define BP_CLKCTRL_HBUS_DIV 0 + +#define HW_CLKCTRL_XBUS 0x40 + +#define HW_CLKCTRL_XTAL 0x50 + +#define HW_CLKCTRL_PIX 0x60 +#define BM_CLKCTRL_PIX_DIV 0x00007FFF +#define BP_CLKCTRL_PIX_DIV 0 +#define BM_CLKCTRL_PIX_CLKGATE 0x80000000 + +#define HW_CLKCTRL_SSP 0x70 + +#define HW_CLKCTRL_GPMI 0x80 + +#define HW_CLKCTRL_SPDIF 0x90 + +#define HW_CLKCTRL_EMI 0xA0 + +#define HW_CLKCTRL_IR 0xB0 + +#define HW_CLKCTRL_SAIF 0xC0 + +#define HW_CLKCTRL_FRAC 0xD0 +#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00 +#define BP_CLKCTRL_FRAC_EMIFRAC 8 +#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000 +#define BP_CLKCTRL_FRAC_PIXFRAC 16 +#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000 + +#define HW_CLKCTRL_CLKSEQ 0xE0 +#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002 + +#define HW_CLKCTRL_RESET 0xF0 +#define BM_CLKCTRL_RESET_DIG 0x00000001 +#define BP_CLKCTRL_RESET_DIG 0 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h new file mode 100644 index 00000000000..ba1bbe265c2 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h @@ -0,0 +1,24 @@ +/* + * stmp37xx: DIGCTL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000) + +#define HW_DIGCTL_CTRL 0x0 +#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h new file mode 100644 index 00000000000..3b6d990a3af --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h @@ -0,0 +1,37 @@ +/* + * stmp37xx: ECC8 register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000) + +#define HW_ECC8_CTRL 0x0 +#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001 +#define BP_ECC8_CTRL_COMPLETE_IRQ 0 +#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100 +#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000 + +#define HW_ECC8_STATUS0 0x10 +#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004 +#define BM_ECC8_STATUS0_CORRECTED 0x00000008 +#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00 +#define BP_ECC8_STATUS0_STATUS_AUX 8 +#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000 +#define BP_ECC8_STATUS0_COMPLETED_CE 16 + +#define HW_ECC8_STATUS1 0x20 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h new file mode 100644 index 00000000000..f2b304f5449 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h @@ -0,0 +1,63 @@ +/* + * stmp37xx: GPMI register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000) +#define REGS_GPMI_PHYS 0x8000C000 +#define REGS_GPMI_SIZE 0x2000 + +#define HW_GPMI_CTRL0 0x0 +#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_GPMI_CTRL0_XFER_COUNT 0 +#define BM_GPMI_CTRL0_CS 0x00300000 +#define BP_GPMI_CTRL0_CS 20 +#define BM_GPMI_CTRL0_LOCK_CS 0x00400000 +#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000 +#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000 +#define BP_GPMI_CTRL0_COMMAND_MODE 24 +#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1 +#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2 +#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3 +#define BM_GPMI_CTRL0_RUN 0x20000000 +#define BM_GPMI_CTRL0_CLKGATE 0x40000000 +#define BM_GPMI_CTRL0_SFTRST 0x80000000 +#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000 +#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000 +#define BP_GPMI_ECCCTRL_ECC_CMD 13 + +#define HW_GPMI_CTRL1 0x60 +#define BM_GPMI_CTRL1_GPMI_MODE 0x00000003 +#define BP_GPMI_CTRL1_GPMI_MODE 0 +#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004 +#define BM_GPMI_CTRL1_DEV_RESET 0x00000008 +#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200 +#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400 +#define BM_GPMI_CTRL1_DSAMPLE_TIME 0x00007000 +#define BP_GPMI_CTRL1_DSAMPLE_TIME 12 + +#define HW_GPMI_TIMING0 0x70 +#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF +#define BP_GPMI_TIMING0_DATA_SETUP 0 +#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00 +#define BP_GPMI_TIMING0_DATA_HOLD 8 + +#define HW_GPMI_TIMING1 0x80 +#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000 +#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h new file mode 100644 index 00000000000..35882a9b8bc --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h @@ -0,0 +1,55 @@ +/* + * stmp37xx: I2C register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000) +#define REGS_I2C_PHYS 0x80058000 +#define REGS_I2C_SIZE 0x2000 + +#define HW_I2C_CTRL0 0x0 +#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_I2C_CTRL0_XFER_COUNT 0 +#define BM_I2C_CTRL0_DIRECTION 0x00010000 +#define BM_I2C_CTRL0_MASTER_MODE 0x00020000 +#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000 +#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000 +#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000 +#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000 +#define BM_I2C_CTRL0_CLKGATE 0x40000000 +#define BM_I2C_CTRL0_SFTRST 0x80000000 + +#define HW_I2C_TIMING0 0x10 + +#define HW_I2C_TIMING1 0x20 + +#define HW_I2C_TIMING2 0x30 + +#define HW_I2C_CTRL1 0x40 +#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001 +#define BP_I2C_CTRL1_SLAVE_IRQ 0 +#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002 +#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004 +#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008 +#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010 +#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020 +#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040 +#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080 +#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000 + +#define HW_I2C_VERSION 0x90 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h new file mode 100644 index 00000000000..3b7c92239e2 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h @@ -0,0 +1,43 @@ +/* + * stmp37xx: ICOLL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_ICOLL +#define _MACH_REGS_ICOLL + +#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0) + +#define HW_ICOLL_VECTOR 0x0 + +#define HW_ICOLL_LEVELACK 0x10 + +#define HW_ICOLL_CTRL 0x20 +#define BM_ICOLL_CTRL_CLKGATE 0x40000000 +#define BM_ICOLL_CTRL_SFTRST 0x80000000 + +#define HW_ICOLL_STAT 0x30 + +#define HW_ICOLL_PRIORITY0 (0x60 + 0 * 0x10) +#define HW_ICOLL_PRIORITY1 (0x60 + 1 * 0x10) +#define HW_ICOLL_PRIORITY2 (0x60 + 2 * 0x10) +#define HW_ICOLL_PRIORITY3 (0x60 + 3 * 0x10) + +#define HW_ICOLL_PRIORITYn 0x60 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h new file mode 100644 index 00000000000..72514e8b073 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h @@ -0,0 +1,89 @@ +/* + * stmp37xx: LCDIF register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000) +#define REGS_LCDIF_PHYS 0x80030000 +#define REGS_LCDIF_SIZE 0x2000 + +#define HW_LCDIF_CTRL 0x0 +#define BM_LCDIF_CTRL_COUNT 0x0000FFFF +#define BP_LCDIF_CTRL_COUNT 0 +#define BM_LCDIF_CTRL_RUN 0x00010000 +#define BM_LCDIF_CTRL_WORD_LENGTH 0x00020000 +#define BM_LCDIF_CTRL_DATA_SELECT 0x00040000 +#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00080000 +#define BM_LCDIF_CTRL_VSYNC_MODE 0x00100000 +#define BM_LCDIF_CTRL_DATA_SWIZZLE 0x00600000 +#define BP_LCDIF_CTRL_DATA_SWIZZLE 21 +#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00800000 +#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x06000000 +#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 25 +#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x08000000 +#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x10000000 +#define BM_LCDIF_CTRL_CLKGATE 0x40000000 +#define BM_LCDIF_CTRL_SFTRST 0x80000000 + +#define HW_LCDIF_CTRL1 0x10 +#define BM_LCDIF_CTRL1_RESET 0x00000001 +#define BP_LCDIF_CTRL1_RESET 0 +#define BM_LCDIF_CTRL1_MODE86 0x00000002 +#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100 +#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200 +#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400 +#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800 +#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000 +#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000 +#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16 + +#define HW_LCDIF_TIMING 0x20 + +#define HW_LCDIF_VDCTRL0 0x30 +#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT 0x000003FF +#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000 +#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000 +#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000 +#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000 +#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000 +#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000 +#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000 +#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000 + +#define HW_LCDIF_VDCTRL1 0x40 +#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0x000FFFFF +#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0 +#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 0xFFF00000 +#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 20 + +#define HW_LCDIF_VDCTRL2 0x50 +#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT 0x000007FF +#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT 0 +#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x007FF800 +#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 11 +#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF800000 +#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 23 + +#define HW_LCDIF_VDCTRL3 0x60 +#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x000001FF +#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0 +#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x00FFF000 +#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 12 +#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON 0x01000000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h new file mode 100644 index 00000000000..cc7b4702d1c --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h @@ -0,0 +1,97 @@ +/* + * stmp37xx: LRADC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000) + +#define HW_LRADC_CTRL0 0x0 +#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF +#define BP_LRADC_CTRL0_SCHEDULE 0 +#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000 +#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000 +#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000 +#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000 +#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000 +#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000 +#define BM_LRADC_CTRL0_CLKGATE 0x40000000 +#define BM_LRADC_CTRL0_SFTRST 0x80000000 + +#define HW_LRADC_CTRL1 0x10 +#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001 +#define BP_LRADC_CTRL1_LRADC0_IRQ 0 +#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020 +#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100 +#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000 +#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000 +#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000 + +#define HW_LRADC_CTRL2 0x20 +#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000 +#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16 +#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000 +#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000 +#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000 +#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24 + +#define HW_LRADC_CTRL3 0x30 +#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300 +#define BP_LRADC_CTRL3_CYCLE_TIME 8 + +#define HW_LRADC_STATUS 0x40 +#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001 +#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0 + +#define HW_LRADC_CH0 (0x50 + 0 * 0x10) +#define HW_LRADC_CH1 (0x50 + 1 * 0x10) +#define HW_LRADC_CH2 (0x50 + 2 * 0x10) +#define HW_LRADC_CH3 (0x50 + 3 * 0x10) +#define HW_LRADC_CH4 (0x50 + 4 * 0x10) +#define HW_LRADC_CH5 (0x50 + 5 * 0x10) +#define HW_LRADC_CH6 (0x50 + 6 * 0x10) +#define HW_LRADC_CH7 (0x50 + 7 * 0x10) + +#define HW_LRADC_CHn 0x50 +#define BM_LRADC_CHn_VALUE 0x0003FFFF +#define BP_LRADC_CHn_VALUE 0 +#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000 +#define BP_LRADC_CHn_NUM_SAMPLES 24 +#define BM_LRADC_CHn_ACCUMULATE 0x20000000 + +#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10) +#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10) +#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10) +#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10) + +#define HW_LRADC_DELAYn 0xD0 +#define BM_LRADC_DELAYn_DELAY 0x000007FF +#define BP_LRADC_DELAYn_DELAY 0 +#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800 +#define BP_LRADC_DELAYn_LOOP_COUNT 11 +#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000 +#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16 +#define BM_LRADC_DELAYn_KICK 0x00100000 +#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000 +#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24 + +#define HW_LRADC_CTRL4 0x140 +#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000 +#define BP_LRADC_CTRL4_LRADC6SELECT 24 +#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000 +#define BP_LRADC_CTRL4_LRADC7SELECT 28 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h new file mode 100644 index 00000000000..d5efce2388c --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h @@ -0,0 +1,88 @@ +/* + * stmp37xx: PINCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_PINCTRL +#define _MACH_REGS_PINCTRL + +#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000) + +#define HW_PINCTRL_MUXSEL0 0x100 +#define HW_PINCTRL_MUXSEL1 0x110 +#define HW_PINCTRL_MUXSEL2 0x120 +#define HW_PINCTRL_MUXSEL3 0x130 +#define HW_PINCTRL_MUXSEL4 0x140 +#define HW_PINCTRL_MUXSEL5 0x150 +#define HW_PINCTRL_MUXSEL6 0x160 +#define HW_PINCTRL_MUXSEL7 0x170 + +#define HW_PINCTRL_DRIVE0 0x200 +#define HW_PINCTRL_DRIVE1 0x210 +#define HW_PINCTRL_DRIVE2 0x220 +#define HW_PINCTRL_DRIVE3 0x230 +#define HW_PINCTRL_DRIVE4 0x240 +#define HW_PINCTRL_DRIVE5 0x250 +#define HW_PINCTRL_DRIVE6 0x260 +#define HW_PINCTRL_DRIVE7 0x270 +#define HW_PINCTRL_DRIVE8 0x280 +#define HW_PINCTRL_DRIVE9 0x290 +#define HW_PINCTRL_DRIVE10 0x2A0 +#define HW_PINCTRL_DRIVE11 0x2B0 +#define HW_PINCTRL_DRIVE12 0x2C0 +#define HW_PINCTRL_DRIVE13 0x2D0 +#define HW_PINCTRL_DRIVE14 0x2E0 + +#define HW_PINCTRL_PULL0 0x300 +#define HW_PINCTRL_PULL1 0x310 +#define HW_PINCTRL_PULL2 0x320 +#define HW_PINCTRL_PULL3 0x330 + +#define HW_PINCTRL_DOUT0 0x400 +#define HW_PINCTRL_DOUT1 0x410 +#define HW_PINCTRL_DOUT2 0x420 + +#define HW_PINCTRL_DIN0 0x500 +#define HW_PINCTRL_DIN1 0x510 +#define HW_PINCTRL_DIN2 0x520 + +#define HW_PINCTRL_DOE0 0x600 +#define HW_PINCTRL_DOE1 0x610 +#define HW_PINCTRL_DOE2 0x620 + +#define HW_PINCTRL_PIN2IRQ0 0x700 +#define HW_PINCTRL_PIN2IRQ1 0x710 +#define HW_PINCTRL_PIN2IRQ2 0x720 + +#define HW_PINCTRL_IRQEN0 0x800 +#define HW_PINCTRL_IRQEN1 0x810 +#define HW_PINCTRL_IRQEN2 0x820 + +#define HW_PINCTRL_IRQLEVEL0 0x900 +#define HW_PINCTRL_IRQLEVEL1 0x910 +#define HW_PINCTRL_IRQLEVEL2 0x920 + +#define HW_PINCTRL_IRQPOL0 0xA00 +#define HW_PINCTRL_IRQPOL1 0xA10 +#define HW_PINCTRL_IRQPOL2 0xA20 + +#define HW_PINCTRL_IRQSTAT0 0xB00 +#define HW_PINCTRL_IRQSTAT1 0xB10 +#define HW_PINCTRL_IRQSTAT2 0xB20 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h new file mode 100644 index 00000000000..0e733d74a22 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h @@ -0,0 +1,56 @@ +/* + * stmp37xx: POWER register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_POWER +#define _MACH_REGS_POWER + +#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000) + +#define HW_POWER_CTRL 0x0 +#define BM_POWER_CTRL_CLKGATE 0x40000000 + +#define HW_POWER_5VCTRL 0x10 + +#define HW_POWER_MINPWR 0x20 + +#define HW_POWER_CHARGE 0x30 + +#define HW_POWER_VDDDCTRL 0x40 + +#define HW_POWER_VDDACTRL 0x50 + +#define HW_POWER_VDDIOCTRL 0x60 +#define BM_POWER_VDDIOCTRL_TRG 0x0000001F +#define BP_POWER_VDDIOCTRL_TRG 0 + +#define HW_POWER_STS 0xB0 +#define BM_POWER_STS_VBUSVALID 0x00000002 +#define BM_POWER_STS_BVALID 0x00000004 +#define BM_POWER_STS_AVALID 0x00000008 +#define BM_POWER_STS_DC_OK 0x00000100 + +#define HW_POWER_RESET 0xE0 + +#define HW_POWER_DEBUG 0xF0 +#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002 +#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004 +#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008 + +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h new file mode 100644 index 00000000000..15966a1b62e --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h @@ -0,0 +1,51 @@ +/* + * stmp37xx: PWM register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000) + +#define HW_PWM_CTRL 0x0 +#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004 +#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020 + +#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20) +#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20) +#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20) +#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20) + +#define HW_PWM_ACTIVEn 0x10 +#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF +#define BP_PWM_ACTIVEn_ACTIVE 0 +#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000 +#define BP_PWM_ACTIVEn_INACTIVE 16 + +#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20) +#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20) +#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20) +#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20) + +#define HW_PWM_PERIODn 0x20 +#define BM_PWM_PERIODn_PERIOD 0x0000FFFF +#define BP_PWM_PERIODn_PERIOD 0 +#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000 +#define BP_PWM_PERIODn_ACTIVE_STATE 16 +#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000 +#define BP_PWM_PERIODn_INACTIVE_STATE 18 +#define BM_PWM_PERIODn_CDIV 0x00700000 +#define BP_PWM_PERIODn_CDIV 20 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h new file mode 100644 index 00000000000..fac40edc38a --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h @@ -0,0 +1,57 @@ +/* + * stmp37xx: RTC register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000) +#define REGS_RTC_PHYS 0x8005C000 +#define REGS_RTC_SIZE 0x2000 + +#define HW_RTC_CTRL 0x0 +#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001 +#define BP_RTC_CTRL_ALARM_IRQ_EN 0 +#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002 +#define BM_RTC_CTRL_ALARM_IRQ 0x00000004 +#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008 +#define BM_RTC_CTRL_WATCHDOGEN 0x00000010 + +#define HW_RTC_STAT 0x10 +#define BM_RTC_STAT_NEW_REGS 0x0000FF00 +#define BP_RTC_STAT_NEW_REGS 8 +#define BM_RTC_STAT_STALE_REGS 0x00FF0000 +#define BP_RTC_STAT_STALE_REGS 16 +#define BM_RTC_STAT_RTC_PRESENT 0x80000000 + +#define HW_RTC_SECONDS 0x30 + +#define HW_RTC_ALARM 0x40 + +#define HW_RTC_WATCHDOG 0x50 + +#define HW_RTC_PERSISTENT0 0x60 +#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002 +#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004 +#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010 +#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020 +#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080 +#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000 +#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18 + +#define HW_RTC_PERSISTENT1 0x70 + +#define HW_RTC_VERSION 0xD0 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h new file mode 100644 index 00000000000..cbde891a06c --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h @@ -0,0 +1,101 @@ +/* + * stmp37xx: SSP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_SSP_BASE (STMP3XXX_REGS_BASE + 0x10000) +#define REGS_SSP1_PHYS 0x80010000 +#define REGS_SSP2_PHYS 0x80034000 +#define REGS_SSP_SIZE 0x2000 + +#define HW_SSP_CTRL0 0x0 +#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_ENABLE 0x00010000 +#define BM_SSP_CTRL0_GET_RESP 0x00020000 +#define BM_SSP_CTRL0_LONG_RESP 0x00080000 +#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000 +#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000 +#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000 +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_DATA_XFER 0x01000000 +#define BM_SSP_CTRL0_READ 0x02000000 +#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000 +#define BM_SSP_CTRL0_LOCK_CS 0x08000000 +#define BM_SSP_CTRL0_RUN 0x20000000 +#define BM_SSP_CTRL0_CLKGATE 0x40000000 +#define BM_SSP_CTRL0_SFTRST 0x80000000 + +#define HW_SSP_CMD0 0x10 +#define BM_SSP_CMD0_CMD 0x000000FF +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00 +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000 +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_APPEND_8CYC 0x00100000 +#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF +#define BP_SSP_CMD1_CMD_ARG 0 + +#define HW_SSP_TIMING 0x50 +#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00 +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000 +#define BP_SSP_TIMING_TIMEOUT 16 + +#define HW_SSP_CTRL1 0x60 +#define BM_SSP_CTRL1_SSP_MODE 0x0000000F +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0 +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_POLARITY 0x00000200 +#define BM_SSP_CTRL1_PHASE 0x00000400 +#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000 +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000 +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000 +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000 +#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000 +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000 +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000 +#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000 +#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000 + +#define HW_SSP_DATA 0x70 + +#define HW_SSP_SDRESP0 0x80 + +#define HW_SSP_SDRESP1 0x90 + +#define HW_SSP_SDRESP2 0xA0 + +#define HW_SSP_SDRESP3 0xB0 + +#define HW_SSP_STATUS 0xC0 +#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020 +#define BM_SSP_STATUS_TIMEOUT 0x00001000 +#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000 +#define BM_SSP_STATUS_RESP_ERR 0x00008000 +#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000 +#define BM_SSP_STATUS_CARD_DETECT 0x10000000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h new file mode 100644 index 00000000000..4af0f6edfa7 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h @@ -0,0 +1,49 @@ +/* + * stmp37xx: TIMROT register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _MACH_REGS_TIMROT +#define _MACH_REGS_TIMROT + +#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000) + +#define HW_TIMROT_ROTCTRL 0x0 +#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000 +#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000 + +#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20) +#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20) +#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20) + +#define HW_TIMROT_TIMCTRLn 0x20 +#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030 +#define BP_TIMROT_TIMCTRLn_PRESCALE 4 +#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040 +#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080 +#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000 +#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000 + +#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20) +#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20) +#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20) + +#define HW_TIMROT_TIMCOUNTn 0x30 +#endif diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h new file mode 100644 index 00000000000..0594275d860 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h @@ -0,0 +1,85 @@ +/* + * stmp37xx: UARTAPP register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTAPP_BASE (STMP3XXX_REGS_BASE + 0x6C000) +#define REGS_UARTAPP1_PHYS 0x8006C000 +#define REGS_UARTAPP_SIZE 0x2000 + +#define HW_UARTAPP_CTRL0 0x0 +#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL0_XFER_COUNT 0 +#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000 +#define BP_UARTAPP_CTRL0_RXTIMEOUT 16 +#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000 +#define BM_UARTAPP_CTRL0_RUN 0x20000000 +#define BM_UARTAPP_CTRL0_SFTRST 0x80000000 +#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF +#define BP_UARTAPP_CTRL1_XFER_COUNT 0 +#define BM_UARTAPP_CTRL1_RUN 0x10000000 + +#define HW_UARTAPP_CTRL2 0x20 +#define BM_UARTAPP_CTRL2_UARTEN 0x00000001 +#define BP_UARTAPP_CTRL2_UARTEN 0 +#define BM_UARTAPP_CTRL2_TXE 0x00000100 +#define BM_UARTAPP_CTRL2_RXE 0x00000200 +#define BM_UARTAPP_CTRL2_RTS 0x00000800 +#define BM_UARTAPP_CTRL2_RTSEN 0x00004000 +#define BM_UARTAPP_CTRL2_CTSEN 0x00008000 +#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000 +#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000 +#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000 + +#define HW_UARTAPP_LINECTRL 0x30 +#define BM_UARTAPP_LINECTRL_BRK 0x00000001 +#define BP_UARTAPP_LINECTRL_BRK 0 +#define BM_UARTAPP_LINECTRL_PEN 0x00000002 +#define BM_UARTAPP_LINECTRL_EPS 0x00000004 +#define BM_UARTAPP_LINECTRL_STP2 0x00000008 +#define BM_UARTAPP_LINECTRL_FEN 0x00000010 +#define BM_UARTAPP_LINECTRL_WLEN 0x00000060 +#define BP_UARTAPP_LINECTRL_WLEN 5 +#define BM_UARTAPP_LINECTRL_SPS 0x00000080 +#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00 +#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8 +#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000 +#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16 + +#define HW_UARTAPP_INTR 0x50 +#define BM_UARTAPP_INTR_CTSMIS 0x00000002 +#define BM_UARTAPP_INTR_RTIS 0x00000040 +#define BM_UARTAPP_INTR_CTSMIEN 0x00020000 +#define BM_UARTAPP_INTR_RXIEN 0x00100000 +#define BM_UARTAPP_INTR_RTIEN 0x00400000 + +#define HW_UARTAPP_DATA 0x60 + +#define HW_UARTAPP_STAT 0x70 +#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF +#define BP_UARTAPP_STAT_RXCOUNT 0 +#define BM_UARTAPP_STAT_FERR 0x00010000 +#define BM_UARTAPP_STAT_PERR 0x00020000 +#define BM_UARTAPP_STAT_BERR 0x00040000 +#define BM_UARTAPP_STAT_OERR 0x00080000 +#define BM_UARTAPP_STAT_RXFE 0x01000000 +#define BM_UARTAPP_STAT_TXFF 0x02000000 +#define BM_UARTAPP_STAT_TXFE 0x08000000 +#define BM_UARTAPP_STAT_CTS 0x10000000 + +#define HW_UARTAPP_VERSION 0x90 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h new file mode 100644 index 00000000000..b810deb552a --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h @@ -0,0 +1,268 @@ +/* + * stmp378x: UARTDBG register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000) +#define REGS_UARTDBG_PHYS 0x80070000 +#define REGS_UARTDBG_SIZE 0x2000 + +#define HW_UARTDBGDR 0x00000000 +#define BP_UARTDBGDR_UNAVAILABLE 16 +#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE) +#define BP_UARTDBGDR_RESERVED 12 +#define BM_UARTDBGDR_RESERVED 0x0000F000 +#define BF_UARTDBGDR_RESERVED(v) \ + (((v) << 12) & BM_UARTDBGDR_RESERVED) +#define BM_UARTDBGDR_OE 0x00000800 +#define BM_UARTDBGDR_BE 0x00000400 +#define BM_UARTDBGDR_PE 0x00000200 +#define BM_UARTDBGDR_FE 0x00000100 +#define BP_UARTDBGDR_DATA 0 +#define BM_UARTDBGDR_DATA 0x000000FF +#define BF_UARTDBGDR_DATA(v) \ + (((v) << 0) & BM_UARTDBGDR_DATA) +#define HW_UARTDBGRSR_ECR 0x00000004 +#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8 +#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE) +#define BP_UARTDBGRSR_ECR_EC 4 +#define BM_UARTDBGRSR_ECR_EC 0x000000F0 +#define BF_UARTDBGRSR_ECR_EC(v) \ + (((v) << 4) & BM_UARTDBGRSR_ECR_EC) +#define BM_UARTDBGRSR_ECR_OE 0x00000008 +#define BM_UARTDBGRSR_ECR_BE 0x00000004 +#define BM_UARTDBGRSR_ECR_PE 0x00000002 +#define BM_UARTDBGRSR_ECR_FE 0x00000001 +#define HW_UARTDBGFR 0x00000018 +#define BP_UARTDBGFR_UNAVAILABLE 16 +#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGFR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE) +#define BP_UARTDBGFR_RESERVED 9 +#define BM_UARTDBGFR_RESERVED 0x0000FE00 +#define BF_UARTDBGFR_RESERVED(v) \ + (((v) << 9) & BM_UARTDBGFR_RESERVED) +#define BM_UARTDBGFR_RI 0x00000100 +#define BM_UARTDBGFR_TXFE 0x00000080 +#define BM_UARTDBGFR_RXFF 0x00000040 +#define BM_UARTDBGFR_TXFF 0x00000020 +#define BM_UARTDBGFR_RXFE 0x00000010 +#define BM_UARTDBGFR_BUSY 0x00000008 +#define BM_UARTDBGFR_DCD 0x00000004 +#define BM_UARTDBGFR_DSR 0x00000002 +#define BM_UARTDBGFR_CTS 0x00000001 +#define HW_UARTDBGILPR 0x00000020 +#define BP_UARTDBGILPR_UNAVAILABLE 8 +#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGILPR_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE) +#define BP_UARTDBGILPR_ILPDVSR 0 +#define BM_UARTDBGILPR_ILPDVSR 0x000000FF +#define BF_UARTDBGILPR_ILPDVSR(v) \ + (((v) << 0) & BM_UARTDBGILPR_ILPDVSR) +#define HW_UARTDBGIBRD 0x00000024 +#define BP_UARTDBGIBRD_UNAVAILABLE 16 +#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIBRD_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE) +#define BP_UARTDBGIBRD_BAUD_DIVINT 0 +#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF +#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \ + (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT) +#define HW_UARTDBGFBRD 0x00000028 +#define BP_UARTDBGFBRD_UNAVAILABLE 8 +#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00 +#define BF_UARTDBGFBRD_UNAVAILABLE(v) \ + (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE) +#define BP_UARTDBGFBRD_RESERVED 6 +#define BM_UARTDBGFBRD_RESERVED 0x000000C0 +#define BF_UARTDBGFBRD_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGFBRD_RESERVED) +#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0 +#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F +#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \ + (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC) +#define HW_UARTDBGLCR_H 0x0000002c +#define BP_UARTDBGLCR_H_UNAVAILABLE 16 +#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE) +#define BP_UARTDBGLCR_H_RESERVED 8 +#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00 +#define BF_UARTDBGLCR_H_RESERVED(v) \ + (((v) << 8) & BM_UARTDBGLCR_H_RESERVED) +#define BM_UARTDBGLCR_H_SPS 0x00000080 +#define BP_UARTDBGLCR_H_WLEN 5 +#define BM_UARTDBGLCR_H_WLEN 0x00000060 +#define BF_UARTDBGLCR_H_WLEN(v) \ + (((v) << 5) & BM_UARTDBGLCR_H_WLEN) +#define BM_UARTDBGLCR_H_FEN 0x00000010 +#define BM_UARTDBGLCR_H_STP2 0x00000008 +#define BM_UARTDBGLCR_H_EPS 0x00000004 +#define BM_UARTDBGLCR_H_PEN 0x00000002 +#define BM_UARTDBGLCR_H_BRK 0x00000001 +#define HW_UARTDBGCR 0x00000030 +#define BP_UARTDBGCR_UNAVAILABLE 16 +#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGCR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE) +#define BM_UARTDBGCR_CTSEN 0x00008000 +#define BM_UARTDBGCR_RTSEN 0x00004000 +#define BM_UARTDBGCR_OUT2 0x00002000 +#define BM_UARTDBGCR_OUT1 0x00001000 +#define BM_UARTDBGCR_RTS 0x00000800 +#define BM_UARTDBGCR_DTR 0x00000400 +#define BM_UARTDBGCR_RXE 0x00000200 +#define BM_UARTDBGCR_TXE 0x00000100 +#define BM_UARTDBGCR_LBE 0x00000080 +#define BP_UARTDBGCR_RESERVED 3 +#define BM_UARTDBGCR_RESERVED 0x00000078 +#define BF_UARTDBGCR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGCR_RESERVED) +#define BM_UARTDBGCR_SIRLP 0x00000004 +#define BM_UARTDBGCR_SIREN 0x00000002 +#define BM_UARTDBGCR_UARTEN 0x00000001 +#define HW_UARTDBGIFLS 0x00000034 +#define BP_UARTDBGIFLS_UNAVAILABLE 16 +#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIFLS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE) +#define BP_UARTDBGIFLS_RESERVED 6 +#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0 +#define BF_UARTDBGIFLS_RESERVED(v) \ + (((v) << 6) & BM_UARTDBGIFLS_RESERVED) +#define BP_UARTDBGIFLS_RXIFLSEL 3 +#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038 +#define BF_UARTDBGIFLS_RXIFLSEL(v) \ + (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL) +#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7 +#define BP_UARTDBGIFLS_TXIFLSEL 0 +#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007 +#define BF_UARTDBGIFLS_TXIFLSEL(v) \ + (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL) +#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1 +#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2 +#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3 +#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6 +#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7 +#define HW_UARTDBGIMSC 0x00000038 +#define BP_UARTDBGIMSC_UNAVAILABLE 16 +#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGIMSC_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE) +#define BP_UARTDBGIMSC_RESERVED 11 +#define BM_UARTDBGIMSC_RESERVED 0x0000F800 +#define BF_UARTDBGIMSC_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGIMSC_RESERVED) +#define BM_UARTDBGIMSC_OEIM 0x00000400 +#define BM_UARTDBGIMSC_BEIM 0x00000200 +#define BM_UARTDBGIMSC_PEIM 0x00000100 +#define BM_UARTDBGIMSC_FEIM 0x00000080 +#define BM_UARTDBGIMSC_RTIM 0x00000040 +#define BM_UARTDBGIMSC_TXIM 0x00000020 +#define BM_UARTDBGIMSC_RXIM 0x00000010 +#define BM_UARTDBGIMSC_DSRMIM 0x00000008 +#define BM_UARTDBGIMSC_DCDMIM 0x00000004 +#define BM_UARTDBGIMSC_CTSMIM 0x00000002 +#define BM_UARTDBGIMSC_RIMIM 0x00000001 +#define HW_UARTDBGRIS 0x0000003c +#define BP_UARTDBGRIS_UNAVAILABLE 16 +#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGRIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE) +#define BP_UARTDBGRIS_RESERVED 11 +#define BM_UARTDBGRIS_RESERVED 0x0000F800 +#define BF_UARTDBGRIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGRIS_RESERVED) +#define BM_UARTDBGRIS_OERIS 0x00000400 +#define BM_UARTDBGRIS_BERIS 0x00000200 +#define BM_UARTDBGRIS_PERIS 0x00000100 +#define BM_UARTDBGRIS_FERIS 0x00000080 +#define BM_UARTDBGRIS_RTRIS 0x00000040 +#define BM_UARTDBGRIS_TXRIS 0x00000020 +#define BM_UARTDBGRIS_RXRIS 0x00000010 +#define BM_UARTDBGRIS_DSRRMIS 0x00000008 +#define BM_UARTDBGRIS_DCDRMIS 0x00000004 +#define BM_UARTDBGRIS_CTSRMIS 0x00000002 +#define BM_UARTDBGRIS_RIRMIS 0x00000001 +#define HW_UARTDBGMIS 0x00000040 +#define BP_UARTDBGMIS_UNAVAILABLE 16 +#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGMIS_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE) +#define BP_UARTDBGMIS_RESERVED 11 +#define BM_UARTDBGMIS_RESERVED 0x0000F800 +#define BF_UARTDBGMIS_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGMIS_RESERVED) +#define BM_UARTDBGMIS_OEMIS 0x00000400 +#define BM_UARTDBGMIS_BEMIS 0x00000200 +#define BM_UARTDBGMIS_PEMIS 0x00000100 +#define BM_UARTDBGMIS_FEMIS 0x00000080 +#define BM_UARTDBGMIS_RTMIS 0x00000040 +#define BM_UARTDBGMIS_TXMIS 0x00000020 +#define BM_UARTDBGMIS_RXMIS 0x00000010 +#define BM_UARTDBGMIS_DSRMMIS 0x00000008 +#define BM_UARTDBGMIS_DCDMMIS 0x00000004 +#define BM_UARTDBGMIS_CTSMMIS 0x00000002 +#define BM_UARTDBGMIS_RIMMIS 0x00000001 +#define HW_UARTDBGICR 0x00000044 +#define BP_UARTDBGICR_UNAVAILABLE 16 +#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGICR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE) +#define BP_UARTDBGICR_RESERVED 11 +#define BM_UARTDBGICR_RESERVED 0x0000F800 +#define BF_UARTDBGICR_RESERVED(v) \ + (((v) << 11) & BM_UARTDBGICR_RESERVED) +#define BM_UARTDBGICR_OEIC 0x00000400 +#define BM_UARTDBGICR_BEIC 0x00000200 +#define BM_UARTDBGICR_PEIC 0x00000100 +#define BM_UARTDBGICR_FEIC 0x00000080 +#define BM_UARTDBGICR_RTIC 0x00000040 +#define BM_UARTDBGICR_TXIC 0x00000020 +#define BM_UARTDBGICR_RXIC 0x00000010 +#define BM_UARTDBGICR_DSRMIC 0x00000008 +#define BM_UARTDBGICR_DCDMIC 0x00000004 +#define BM_UARTDBGICR_CTSMIC 0x00000002 +#define BM_UARTDBGICR_RIMIC 0x00000001 +#define HW_UARTDBGDMACR 0x00000048 +#define BP_UARTDBGDMACR_UNAVAILABLE 16 +#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000 +#define BF_UARTDBGDMACR_UNAVAILABLE(v) \ + (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE) +#define BP_UARTDBGDMACR_RESERVED 3 +#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8 +#define BF_UARTDBGDMACR_RESERVED(v) \ + (((v) << 3) & BM_UARTDBGDMACR_RESERVED) +#define BM_UARTDBGDMACR_DMAONERR 0x00000004 +#define BM_UARTDBGDMACR_TXDMAE 0x00000002 +#define BM_UARTDBGDMACR_RXDMAE 0x00000001 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h new file mode 100644 index 00000000000..9145e22df32 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h @@ -0,0 +1,22 @@ +/* + * stmp37xx: USBCTL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBCTL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTL_PHYS 0x80000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h new file mode 100644 index 00000000000..1a2ae9cbdfe --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h @@ -0,0 +1,22 @@ +/* + * stmp37xx: USBCTRL register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000) +#define REGS_USBCTRL_PHYS 0x80080000 diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h new file mode 100644 index 00000000000..b7fce0fbc56 --- /dev/null +++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h @@ -0,0 +1,37 @@ +/* + * stmp37xx: USBPHY register definitions + * + * Copyright (c) 2008 Freescale Semiconductor + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000) + +#define HW_USBPHY_PWD 0x0 + +#define HW_USBPHY_CTRL 0x30 +#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT 0x00000001 +#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT 0 +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002 +#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010 +#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 +#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 +#define BM_USBPHY_CTRL_CLKGATE 0x40000000 +#define BM_USBPHY_CTRL_SFTRST 0x80000000 + +#define HW_USBPHY_STATUS 0x40 +#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040 +#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100 diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c new file mode 100644 index 00000000000..8c7d6fb191a --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx.c @@ -0,0 +1,219 @@ +/* + * Freescale STMP37XX platform support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include <mach/stmp3xxx.h> +#include <mach/dma.h> + +#include <mach/platform.h> +#include <mach/regs-icoll.h> +#include <mach/regs-apbh.h> +#include <mach/regs-apbx.h> +#include "stmp37xx.h" + +/* + * IRQ handling + */ +static void stmp37xx_ack_irq(unsigned int irq) +{ + /* Disable IRQ */ + stmp3xxx_clearl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); + + /* ACK current interrupt */ + __raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + +static void stmp37xx_mask_irq(unsigned int irq) +{ + /* IRQ disable */ + stmp3xxx_clearl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); +} + +static void stmp37xx_unmask_irq(unsigned int irq) +{ + /* IRQ enable */ + stmp3xxx_setl(0x04 << ((irq % 4) * 8), + REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10); +} + +static struct irq_chip stmp37xx_chip = { + .ack = stmp37xx_ack_irq, + .mask = stmp37xx_mask_irq, + .unmask = stmp37xx_unmask_irq, +}; + +void __init stmp37xx_init_irq(void) +{ + stmp3xxx_init_irq(&stmp37xx_chip); +} + +/* + * DMA interrupt handling + */ +void stmp3xxx_arch_dma_enable_interrupt(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)), + REGS_APBH_BASE + HW_APBH_CTRL1); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)), + REGS_APBX_BASE + HW_APBX_CTRL1); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt); + +void stmp3xxx_arch_dma_clear_interrupt(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), + REGS_APBH_BASE + HW_APBH_CTRL1); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), + REGS_APBX_BASE + HW_APBX_CTRL1); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt); + +int stmp3xxx_arch_dma_is_interrupt(int channel) +{ + int r = 0; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + + case STMP3XXX_BUS_APBX: + r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) & + (1 << STMP3XXX_DMA_CHANNEL(channel)); + break; + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt); + +void stmp3xxx_arch_dma_reset_channel(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + /* Reset channel and wait for it to complete */ + stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL, + REGS_APBH_BASE + HW_APBH_CTRL0); + while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) & + (chbit << BP_APBH_CTRL0_RESET_CHANNEL)) + cpu_relax(); + break; + + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL, + REGS_APBX_BASE + HW_APBX_CTRL0); + while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) & + (chbit << BP_APBX_CTRL0_RESET_CHANNEL)) + cpu_relax(); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel); + +void stmp3xxx_arch_dma_freeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze); + +void stmp3xxx_arch_dma_unfreeze(int channel) +{ + unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + case STMP3XXX_BUS_APBX: + stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0); + break; + } +} +EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze); + +/* + * The registers are all very closely mapped, so we might as well map them all + * with a single mapping + * + * Logical Physical + * f0000000 80000000 On-chip registers + * f1000000 00000000 32k on-chip SRAM + */ +static struct map_desc stmp37xx_io_desc[] __initdata = { + { + .virtual = (u32)STMP3XXX_REGS_BASE, + .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE), + .length = SZ_1M, + .type = MT_DEVICE + }, + { + .virtual = (u32)STMP3XXX_OCRAM_BASE, + .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE), + .length = STMP3XXX_OCRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init stmp37xx_map_io(void) +{ + iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc)); +} diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h new file mode 100644 index 00000000000..0b75fb796a6 --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx.h @@ -0,0 +1,24 @@ +/* + * Freescale STMP37XX/STMP378X internal functions and data declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __MACH_STMP37XX_H +#define __MACH_STMP37XX_H + +void stmp37xx_map_io(void); +void stmp37xx_init_irq(void); + +#endif /* __MACH_STMP37XX_H */ diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c new file mode 100644 index 00000000000..394f21ab59e --- /dev/null +++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c @@ -0,0 +1,101 @@ +/* + * Freescale STMP37XX development board support + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/stmp3xxx.h> +#include <mach/pins.h> +#include <mach/pinmux.h> +#include "stmp37xx.h" + +/* + * List of STMP37xx development board specific devices + */ +static struct platform_device *stmp37xx_devb_devices[] = { + &stmp3xxx_dbguart, + &stmp3xxx_appuart, +}; + +static struct pin_desc dbguart_pins_0[] = { + { PINID_PWM0, PIN_FUN3, }, + { PINID_PWM1, PIN_FUN3, }, +}; + +struct pin_desc appuart_pins_0[] = { + { PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, + { PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, }, +}; + +static struct pin_group appuart_pins[] = { + [0] = { + .pins = appuart_pins_0, + .nr_pins = ARRAY_SIZE(appuart_pins_0), + }, + /* 37xx has the only app uart */ +}; + +static struct pin_group dbguart_pins[] = { + [0] = { + .pins = dbguart_pins_0, + .nr_pins = ARRAY_SIZE(dbguart_pins_0), + }, +}; + +static int dbguart_pins_control(int id, int request) +{ + int r = 0; + + if (request) + r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart"); + else + stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart"); + return r; +} + + +static void __init stmp37xx_devb_init(void) +{ + stmp3xxx_pinmux_init(NR_REAL_IRQS); + + /* Init STMP3xxx platform */ + stmp3xxx_init(); + + stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control; + stmp3xxx_appuart.dev.platform_data = appuart_pins; + + /* Add STMP37xx development board devices */ + platform_add_devices(stmp37xx_devb_devices, + ARRAY_SIZE(stmp37xx_devb_devices)); +} + +MACHINE_START(STMP37XX, "STMP37XX") + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = stmp37xx_map_io, + .init_irq = stmp37xx_init_irq, + .timer = &stmp3xxx_timer, + .init_machine = stmp37xx_devb_init, +MACHINE_END diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig new file mode 100644 index 00000000000..2cf37c35951 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Kconfig @@ -0,0 +1,37 @@ +if ARCH_STMP3XXX + +menu "Freescale STMP3xxx implementations" + +choice + prompt "Select STMP3xxx chip family" + +config ARCH_STMP37XX + bool "Freescale SMTP37xx" + select CPU_ARM926T + ---help--- + STMP37xx refers to 3700 through 3769 chips + +config ARCH_STMP378X + bool "Freescale STMP378x" + select CPU_ARM926T + ---help--- + STMP378x refers to 3780 through 3789 chips + +endchoice + +choice + prompt "Select STMP3xxx board type" + +config MACH_STMP37XX + depends on ARCH_STMP37XX + bool "Freescale STMP37xx development board" + +config MACH_STMP378X + depends on ARCH_STMP378X + bool "Freescale STMP378x development board" + +endchoice + +endmenu + +endif diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile new file mode 100644 index 00000000000..31dd518f37a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the linux kernel. +# +# Object file lists. +obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c new file mode 100644 index 00000000000..5d2f19a09e4 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.c @@ -0,0 +1,1135 @@ +/* + * Clock manipulation routines for Freescale STMP37XX/STMP378X + * + * Author: Vitaly Wool <vital@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define DEBUG +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <asm/mach-types.h> +#include <asm/clkdev.h> +#include <mach/platform.h> +#include <mach/regs-clkctrl.h> + +#include "clock.h" + +static DEFINE_SPINLOCK(clocks_lock); + +static struct clk osc_24M; +static struct clk pll_clk; +static struct clk cpu_clk; +static struct clk hclk; + +static int propagate_rate(struct clk *); + +static inline int clk_is_busy(struct clk *clk) +{ + return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit); +} + +static inline int clk_good(struct clk *clk) +{ + return clk && !IS_ERR(clk) && clk->ops; +} + +static int std_clk_enable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg &= ~(1 << clk->enable_shift); + else + clk_reg |= (1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + if (clk->enable_wait) + udelay(clk->enable_wait); + return 0; + } else + return -EINVAL; +} + +static int std_clk_disable(struct clk *clk) +{ + if (clk->enable_reg) { + u32 clk_reg = __raw_readl(clk->enable_reg); + if (clk->enable_negate) + clk_reg |= (1 << clk->enable_shift); + else + clk_reg &= ~(1 << clk->enable_shift); + __raw_writel(clk_reg, clk->enable_reg); + return 0; + } else + return -EINVAL; +} + +static int io_set_rate(struct clk *clk, u32 rate) +{ + u32 reg_frac, clkctrl_frac; + int i, ret = 0, mask = 0x1f; + + clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate; + + if (clkctrl_frac < 18 || clkctrl_frac > 35) { + ret = -EINVAL; + goto out; + } + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift), + clk->scale_reg); + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + } +out: + return ret; +} + +static long io_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + int mask = 0x1f; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + clk->rate = rate; + + return rate; +} + +static long per_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + if (clk->enable_reg && + !(__raw_readl(clk->enable_reg) & clk->enable_shift)) + clk->rate = 0; + else { + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) + rate /= div; + clk->rate = rate; + } + + return clk->rate; +} + +static int per_set_rate(struct clk *clk, u32 rate) +{ + int ret = -EINVAL; + int div = (clk->parent->rate + rate - 1) / rate; + u32 reg_frac; + const int mask = 0xff; + int try = 10; + int i = -1; + + if (div == 0 || div > mask) + goto out; + + reg_frac = __raw_readl(clk->scale_reg); + reg_frac &= ~(mask << clk->scale_shift); + + while (try--) { + __raw_writel(reg_frac | (div << clk->scale_shift), + clk->scale_reg); + + if (clk->busy_reg) { + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + } + if (i) + break; + } + + if (!i) + ret = -ETIMEDOUT; + else + ret = 0; + +out: + if (ret != 0) + printk(KERN_ERR "%s: error %d\n", __func__, ret); + return ret; +} + +static long lcdif_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + long div; + const int mask = 0xff; + + div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask; + if (div) { + rate /= div; + div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) & + BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC; + rate /= div; + } + clk->rate = rate; + + return rate; +} + +static int lcdif_set_rate(struct clk *clk, u32 rate) +{ + int ret = 0; + /* + * On 3700, we can get most timings exact by modifying ref_pix + * and the divider, but keeping the phase timings at 1 (2 + * phases per cycle). + * + * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz, + * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns. + * + * ns_cycle >= 2*18e3/(18*480) = 25/6 + * ns_cycle <= 2*35e3/(18*480) = 875/108 + * + * Multiply the ns_cycle by 'div' to lengthen it until it fits the + * bounds. This is the divider we'll use after ref_pix. + * + * 6 * ns_cycle >= 25 * div + * 108 * ns_cycle <= 875 * div + */ + u32 ns_cycle = 1000000 / rate; + u32 div, reg_val; + u32 lowest_result = (u32) -1; + u32 lowest_div = 0, lowest_fracdiv = 0; + + for (div = 1; div < 256; ++div) { + u32 fracdiv; + u32 ps_result; + int lower_bound = 6 * ns_cycle >= 25 * div; + int upper_bound = 108 * ns_cycle <= 875 * div; + if (!lower_bound) + break; + if (!upper_bound) + continue; + /* + * Found a matching div. Calculate fractional divider needed, + * rounded up. + */ + fracdiv = ((clk->parent->rate / 1000 * 18 / 2) * + ns_cycle + 1000 * div - 1) / + (1000 * div); + if (fracdiv < 18 || fracdiv > 35) { + ret = -EINVAL; + goto out; + } + /* Calculate the actual cycle time this results in */ + ps_result = 6250 * div * fracdiv / 27; + + /* Use the fastest result that doesn't break ns_cycle */ + if (ps_result <= lowest_result) { + lowest_result = ps_result; + lowest_div = div; + lowest_fracdiv = fracdiv; + } + } + + if (div >= 256 || lowest_result == (u32) -1) { + ret = -EINVAL; + goto out; + } + pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz " + "PIXCLK=%uMHz cycle=%u.%03uns\n", + lowest_fracdiv, lowest_div, + 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div, + lowest_result / 1000, lowest_result % 1000); + + /* Program ref_pix phase fractional divider */ + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC; + reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC); + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + + /* Ungate PFD */ + stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX, + REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC); + + /* Program pix divider */ + reg_val = __raw_readl(clk->scale_reg); + reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE); + reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV); + __raw_writel(reg_val, clk->scale_reg); + + /* Wait for divider update */ + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + ret = -ETIMEDOUT; + goto out; + } + } + + /* Switch to ref_pix source */ + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ); + reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX; + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ); + +out: + return ret; +} + + +static int cpu_set_rate(struct clk *clk, u32 rate) +{ + u32 reg_val; + + if (rate < 24000) + return -EINVAL; + else if (rate == 24000) { + /* switch to the 24M source */ + clk_set_parent(clk, &osc_24M); + } else { + int i; + u32 clkctrl_cpu = 1; + u32 c = clkctrl_cpu; + u32 clkctrl_frac = 1; + u32 val; + for ( ; c < 0x40; c++) { + u32 f = (pll_clk.rate*18/c + rate/2) / rate; + int s1, s2; + + if (f < 18 || f > 35) + continue; + s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate; + s2 = pll_clk.rate*18/c/f - rate; + pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2); + if (abs(s1) > abs(s2)) { + clkctrl_cpu = c; + clkctrl_frac = f; + } + if (s2 == 0) + break; + }; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (c == 0x40) { + int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - + rate; + if (abs(d) > 100 || + clkctrl_frac < 18 || clkctrl_frac > 35) + return -EINVAL; + } + + /* 4.6.2 */ + val = __raw_readl(clk->scale_reg); + val &= ~(0x3f << clk->scale_shift); + val |= clkctrl_frac; + clk_set_parent(clk, &osc_24M); + udelay(10); + __raw_writel(val, clk->scale_reg); + /* ungate */ + __raw_writel(1<<7, clk->scale_reg + 8); + /* write clkctrl_cpu */ + clk->saved_div = clkctrl_cpu; + + reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + reg_val &= ~0x3F; + reg_val |= clkctrl_cpu; + __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + clk_set_parent(clk, &pll_clk); + clk->saved_div = 0; + udelay(10); + } + return 0; +} + +static long cpu_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f; + rate = ((rate + 9) / 10) * 10; + clk->rate = rate; + + return rate; +} + +static long cpu_round_rate(struct clk *clk, u32 rate) +{ + unsigned long r = 0; + + if (rate <= 24000) + r = 24000; + else { + u32 clkctrl_cpu = 1; + u32 clkctrl_frac; + do { + clkctrl_frac = + (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate; + if (clkctrl_frac > 35) + continue; + if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 == + rate / 10) + break; + } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate); + if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate) + clkctrl_cpu--; + pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__, + clkctrl_cpu, clkctrl_frac); + if (clkctrl_frac < 18) + clkctrl_frac = 18; + if (clkctrl_frac > 35) + clkctrl_frac = 35; + + r = pll_clk.rate * 18; + r /= clkctrl_frac; + r /= clkctrl_cpu; + r = 10 * ((r + 9) / 10); + } + return r; +} + +static long emi_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate * 18; + + rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f; + rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f; + clk->rate = rate; + + return rate; +} + +static int clkseq_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + int shift = 8; + + /* bypass? */ + if (parent == &osc_24M) + shift = 4; + + if (clk->bypass_reg) { +#ifdef CONFIG_ARCH_STMP378X + u32 hbus_val, cpu_val; + + if (clk == &cpu_clk && shift == 4) { + hbus_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_HBUS); + cpu_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_CPU); + + hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN | + BM_CLKCTRL_HBUS_DIV); + clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + cpu_val |= 1; + + if (machine_is_stmp378x()) { + __raw_writel(hbus_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + __raw_writel(cpu_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + hclk.rate = 0; + } + } else if (clk == &cpu_clk && shift == 8) { + hbus_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_HBUS); + cpu_val = __raw_readl(REGS_CLKCTRL_BASE + + HW_CLKCTRL_CPU); + hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN | + BM_CLKCTRL_HBUS_DIV); + hbus_val |= 2; + cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU; + if (clk->saved_div) + cpu_val |= clk->saved_div; + else + cpu_val |= 2; + + if (machine_is_stmp378x()) { + __raw_writel(hbus_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + __raw_writel(cpu_val, + REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU); + hclk.rate = 0; + } + } +#endif + __raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift); + + ret = 0; + } + + return ret; +} + +static int hbus_set_rate(struct clk *clk, u32 rate) +{ + u8 div = 0; + int is_frac = 0; + u32 clkctrl_hbus; + struct clk *parent = clk->parent; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + parent->rate); + + if (rate > parent->rate) + return -EINVAL; + + if (((parent->rate + rate/2) / rate) * rate != parent->rate && + parent->rate / rate < 32) { + pr_debug("%s: switching to fractional mode\n", __func__); + is_frac = 1; + } + + if (is_frac) + div = (32 * rate + parent->rate / 2) / parent->rate; + else + div = (parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x1f) + return -EINVAL; + + clk_set_parent(&cpu_clk, &osc_24M); + udelay(10); + clkctrl_hbus = __raw_readl(clk->scale_reg); + clkctrl_hbus &= ~0x3f; + clkctrl_hbus |= div; + clkctrl_hbus |= (is_frac << 5); + + __raw_writel(clkctrl_hbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up CPU divisor\n"); + return -ETIMEDOUT; + } + } + clk_set_parent(&cpu_clk, &pll_clk); + __raw_writel(clkctrl_hbus, clk->scale_reg); + udelay(10); + return 0; +} + +static long hbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + if (__raw_readl(clk->scale_reg) & 0x20) { + rate *= __raw_readl(clk->scale_reg) & 0x1f; + rate /= 32; + } else + rate /= __raw_readl(clk->scale_reg) & 0x1f; + clk->rate = rate; + + return rate; +} + +static int xbus_set_rate(struct clk *clk, u32 rate) +{ + u16 div = 0; + u32 clkctrl_xbus; + + pr_debug("%s: rate %d, parent rate %d\n", __func__, rate, + clk->parent->rate); + + div = (clk->parent->rate + rate - 1) / rate; + pr_debug("%s: div calculated is %d\n", __func__, div); + if (!div || div > 0x3ff) + return -EINVAL; + + clkctrl_xbus = __raw_readl(clk->scale_reg); + clkctrl_xbus &= ~0x3ff; + clkctrl_xbus |= div; + __raw_writel(clkctrl_xbus, clk->scale_reg); + if (clk->busy_reg) { + int i; + for (i = 10000; i; i--) + if (!clk_is_busy(clk)) + break; + if (!i) { + printk(KERN_ERR "couldn't set up xbus divisor\n"); + return -ETIMEDOUT; + } + } + return 0; +} + +static long xbus_get_rate(struct clk *clk) +{ + long rate = clk->parent->rate; + + rate /= __raw_readl(clk->scale_reg) & 0x3ff; + clk->rate = rate; + + return rate; +} + + +/* Clock ops */ + +static struct clk_ops std_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = per_get_rate, + .set_rate = per_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops min_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, +}; + +static struct clk_ops cpu_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = cpu_get_rate, + .set_rate = cpu_set_rate, + .round_rate = cpu_round_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops io_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = io_get_rate, + .set_rate = io_set_rate, +}; + +static struct clk_ops hbus_ops = { + .get_rate = hbus_get_rate, + .set_rate = hbus_set_rate, +}; + +static struct clk_ops xbus_ops = { + .get_rate = xbus_get_rate, + .set_rate = xbus_set_rate, +}; + +static struct clk_ops lcdif_ops = { + .enable = std_clk_enable, + .disable = std_clk_disable, + .get_rate = lcdif_get_rate, + .set_rate = lcdif_set_rate, + .set_parent = clkseq_set_parent, +}; + +static struct clk_ops emi_ops = { + .get_rate = emi_get_rate, +}; + +/* List of on-chip clocks */ + +static struct clk osc_24M = { + .flags = FIXED_RATE | ENABLED, + .rate = 24000, +}; + +static struct clk pll_clk = { + .parent = &osc_24M, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0, + .enable_shift = 16, + .enable_wait = 10, + .flags = FIXED_RATE | ENABLED, + .rate = 480000, + .ops = &min_ops, +}; + +static struct clk cpu_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 0, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 7, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU, + .busy_bit = 28, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &cpu_ops, +}; + +static struct clk io_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 24, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &io_ops, +}; + +static struct clk hclk = { + .parent = &cpu_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 7, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS, + .busy_bit = 29, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &hbus_ops, +}; + +static struct clk xclk = { + .parent = &osc_24M, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS, + .busy_bit = 31, + .flags = RATE_PROPAGATES | ENABLED, + .ops = &xbus_ops, +}; + +static struct clk uart_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 31, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk audio_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 30, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk pwm_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 29, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk dri_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 28, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk digctl_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 27, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk timer_clk = { + .parent = &xclk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL, + .enable_shift = 26, + .enable_negate = 1, + .flags = ENABLED, + .ops = &min_ops, +}; + +static struct clk lcdif_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 1, + .flags = NEEDS_SET_PARENT, + .ops = &lcdif_ops, +}; + +static struct clk ssp_clk = { + .parent = &io_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP, + .enable_shift = 31, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 5, + .enable_negate = 1, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk gpmi_clk = { + .parent = &io_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 4, + .flags = NEEDS_SET_PARENT, + .ops = &std_ops, +}; + +static struct clk spdif_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF, + .enable_shift = 31, + .enable_negate = 1, + .ops = &min_ops, +}; + +static struct clk emi_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI, + .enable_shift = 31, + .enable_negate = 1, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC, + .scale_shift = 8, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI, + .busy_bit = 28, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 6, + .flags = ENABLED, + .ops = &emi_ops, +}; + +static struct clk ir_clk = { + .parent = &io_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_IR, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 3, + .ops = &min_ops, +}; + +static struct clk saif_clk = { + .parent = &pll_clk, + .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .busy_bit = 29, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF, + .enable_shift = 31, + .enable_negate = 1, + .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ, + .bypass_shift = 0, + .ops = &std_ops, +}; + +static struct clk usb_clk = { + .parent = &pll_clk, + .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0, + .enable_shift = 18, + .enable_negate = 1, + .ops = &min_ops, +}; + +/* list of all the clocks */ +static struct clk_lookup onchip_clks[] = { + { + .con_id = "osc_24M", + .clk = &osc_24M, + }, { + .con_id = "pll", + .clk = &pll_clk, + }, { + .con_id = "cpu", + .clk = &cpu_clk, + }, { + .con_id = "hclk", + .clk = &hclk, + }, { + .con_id = "xclk", + .clk = &xclk, + }, { + .con_id = "io", + .clk = &io_clk, + }, { + .con_id = "uart", + .clk = &uart_clk, + }, { + .con_id = "audio", + .clk = &audio_clk, + }, { + .con_id = "pwm", + .clk = &pwm_clk, + }, { + .con_id = "dri", + .clk = &dri_clk, + }, { + .con_id = "digctl", + .clk = &digctl_clk, + }, { + .con_id = "timer", + .clk = &timer_clk, + }, { + .con_id = "lcdif", + .clk = &lcdif_clk, + }, { + .con_id = "ssp", + .clk = &ssp_clk, + }, { + .con_id = "gpmi", + .clk = &gpmi_clk, + }, { + .con_id = "spdif", + .clk = &spdif_clk, + }, { + .con_id = "emi", + .clk = &emi_clk, + }, { + .con_id = "ir", + .clk = &ir_clk, + }, { + .con_id = "saif", + .clk = &saif_clk, + }, { + .con_id = "usb", + .clk = &usb_clk, + }, +}; + +static int __init propagate_rate(struct clk *clk) +{ + struct clk_lookup *cl; + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (unlikely(!clk_good(cl->clk))) + continue; + if (cl->clk->parent == clk && cl->clk->ops->get_rate) { + cl->clk->ops->get_rate(cl->clk); + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } + } + + return 0; +} + +/* Exported API */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->ops->get_rate != NULL) + return clk->ops->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->ops->round_rate) + return clk->ops->round_rate(clk, rate); + + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +static inline int close_enough(long rate1, long rate2) +{ + return rate1 && !((rate2 - rate1) * 1000 / rate1); +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (unlikely(!clk_good(clk))) + goto out; + + if (clk->flags & FIXED_RATE || !clk->ops->set_rate) + goto out; + + else if (!close_enough(clk->rate, rate)) { + ret = clk->ops->set_rate(clk, rate); + if (ret < 0) + goto out; + clk->rate = rate; + if (clk->flags & RATE_PROPAGATES) + propagate_rate(clk); + } else + ret = 0; + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_enable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return -EINVAL; + + if (clk->parent) + clk_enable(clk->parent); + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + clk->usage++; + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void local_clk_disable(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return; + + if (clk->usage == 0 && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent) + local_clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + return; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + if ((--clk->usage) == 0 && clk->ops->disable) + clk->ops->disable(clk); + + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + if (clk->parent) + clk_disable(clk->parent); +} +EXPORT_SYMBOL(clk_disable); + +/* Some additional API */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -ENODEV; + unsigned long clocks_flags; + + if (unlikely(!clk_good(clk))) + goto out; + + if (!clk->ops->set_parent) + goto out; + + spin_lock_irqsave(&clocks_lock, clocks_flags); + + ret = clk->ops->set_parent(clk, parent); + if (!ret) { + /* disable if usage count is 0 */ + local_clk_disable(parent); + + parent->usage += clk->usage; + clk->parent->usage -= clk->usage; + + /* disable if new usage count is 0 */ + local_clk_disable(clk->parent); + + clk->parent = parent; + } + spin_unlock_irqrestore(&clocks_lock, clocks_flags); + +out: + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return NULL; + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +static int __init clk_init(void) +{ + struct clk_lookup *cl; + struct clk_ops *ops; + + spin_lock_init(&clocks_lock); + + for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks); + cl++) { + if (cl->clk->flags & ENABLED) + clk_enable(cl->clk); + else + local_clk_disable(cl->clk); + + ops = cl->clk->ops; + + if ((cl->clk->flags & NEEDS_INITIALIZATION) && + ops && ops->set_rate) + ops->set_rate(cl->clk, cl->clk->rate); + + if (cl->clk->flags & FIXED_RATE) { + if (cl->clk->flags & RATE_PROPAGATES) + propagate_rate(cl->clk); + } else { + if (ops && ops->get_rate) + ops->get_rate(cl->clk); + } + + if (cl->clk->flags & NEEDS_SET_PARENT) { + if (ops && ops->set_parent) + ops->set_parent(cl->clk, cl->clk->parent); + } + + clkdev_add(cl); + } + return 0; +} + +arch_initcall(clk_init); diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h new file mode 100644 index 00000000000..a6611e1a351 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/clock.h @@ -0,0 +1,61 @@ +/* + * Clock control driver for Freescale STMP37XX/STMP378X - internal header file + * + * Author: Vitaly Wool <vital@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__ +#define __ARCH_ARM_STMX3XXX_CLOCK_H__ + +#ifndef __ASSEMBLER__ + +struct clk_ops { + int (*enable) (struct clk *); + int (*disable) (struct clk *); + long (*get_rate) (struct clk *); + long (*round_rate) (struct clk *, u32); + int (*set_rate) (struct clk *, u32); + int (*set_parent) (struct clk *, struct clk *); +}; + +struct clk { + struct clk *parent; + u32 rate; + u32 flags; + u8 scale_shift; + u8 enable_shift; + u8 bypass_shift; + u8 busy_bit; + s8 usage; + int enable_wait; + int enable_negate; + u32 saved_div; + void __iomem *enable_reg; + void __iomem *scale_reg; + void __iomem *bypass_reg; + void __iomem *busy_reg; + struct clk_ops *ops; +}; + +#endif /* __ASSEMBLER__ */ + +/* Flags */ +#define RATE_PROPAGATES (1<<0) +#define NEEDS_INITIALIZATION (1<<1) +#define PARENT_SET_RATE (1<<2) +#define FIXED_RATE (1<<3) +#define ENABLED (1<<4) +#define NEEDS_SET_PARENT (1<<5) + +#endif diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c new file mode 100644 index 00000000000..37b8a09148a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/core.c @@ -0,0 +1,128 @@ +/* + * Freescale STMP37XX/STMP378X core routines + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/dma.h> +#include <mach/regs-clkctrl.h> + +static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + u32 c; + int timeout; + + /* the process of software reset of IP block is done + in several steps: + + - clear SFTRST and wait for block is enabled; + - clear clock gating (CLKGATE bit); + - set the SFTRST again and wait for block is in reset; + - clear SFTRST and wait for reset completion. + */ + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + + if (!just_enable) { + c = __raw_readl(hwreg); + c |= (1<<31); /* now again set SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* poll until CLKGATE set */ + if (__raw_readl(hwreg) & (1<<30)) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when resetting\n", + __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<31); /* clear SFTRST */ + __raw_writel(c, hwreg); + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<31)) == 0) + break; + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when enabling " + "after reset\n", __func__, hwreg); + return -ETIME; + } + + c = __raw_readl(hwreg); + c &= ~(1<<30); /* clear CLKGATE */ + __raw_writel(c, hwreg); + } + for (timeout = 1000000; timeout > 0; timeout--) + /* still in SFTRST state ? */ + if ((__raw_readl(hwreg) & (1<<30)) == 0) + break; + + if (timeout <= 0) { + printk(KERN_ERR"%s(%p): timeout when unclockgating\n", + __func__, hwreg); + return -ETIME; + } + + return 0; +} + +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable) +{ + int try = 10; + int r; + + while (try--) { + r = __stmp3xxx_reset_block(hwreg, just_enable); + if (!r) + break; + pr_debug("%s: try %d failed\n", __func__, 10 - try); + } + return r; +} +EXPORT_SYMBOL(stmp3xxx_reset_block); + +struct platform_device stmp3xxx_dbguart = { + .name = "stmp3xxx-dbguart", + .id = -1, +}; + +void __init stmp3xxx_init(void) +{ + /* Turn off auto-slow and other tricks */ + stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS); + + stmp3xxx_dma_init(); +} diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c new file mode 100644 index 00000000000..68fed4b8746 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/devices.c @@ -0,0 +1,389 @@ +/* +* Freescale STMP37XX/STMP378X platform devices +* +* Embedded Alley Solutions, Inc <source@embeddedalley.com> +* +* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. +* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. +*/ + +/* +* The code contained herein is licensed under the GNU General Public +* License. You may obtain a copy of the GNU General Public License +* Version 2 or later at the following locations: +* +* http://www.opensource.org/licenses/gpl-license.html +* http://www.gnu.org/copyleft/gpl.html +*/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <mach/dma.h> +#include <mach/platform.h> +#include <mach/stmp3xxx.h> +#include <mach/regs-lcdif.h> +#include <mach/regs-uartapp.h> +#include <mach/regs-gpmi.h> +#include <mach/regs-usbctrl.h> +#include <mach/regs-ssp.h> +#include <mach/regs-rtc.h> + +static u64 common_dmamask = DMA_BIT_MASK(32); + +static struct resource appuart_resources[] = { + { + .start = IRQ_UARTAPP_INTERNAL, + .end = IRQ_UARTAPP_INTERNAL, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_UARTAPP_RX_DMA, + .end = IRQ_UARTAPP_RX_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_UARTAPP_TX_DMA, + .end = IRQ_UARTAPP_TX_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = REGS_UARTAPP1_PHYS, + .end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE, + .flags = IORESOURCE_MEM, + }, { + /* Rx DMA channel */ + .start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX), + .flags = IORESOURCE_DMA, + }, { + /* Tx DMA channel */ + .start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX), + .end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX), + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device stmp3xxx_appuart = { + .name = "stmp3xxx-appuart", + .id = 0, + .resource = appuart_resources, + .num_resources = ARRAY_SIZE(appuart_resources), + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device stmp3xxx_watchdog = { + .name = "stmp3xxx_wdt", + .id = -1, +}; + +static struct resource ts_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_TOUCH_DETECT, + .end = IRQ_TOUCH_DETECT, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_LRADC_CH5, + .end = IRQ_LRADC_CH5, + }, +}; + +struct platform_device stmp3xxx_touchscreen = { + .name = "stmp3xxx_ts", + .id = -1, + .resource = ts_resource, + .num_resources = ARRAY_SIZE(ts_resource), +}; + +/* +* Keypad device +*/ +struct platform_device stmp3xxx_keyboard = { + .name = "stmp3xxx-keyboard", + .id = -1, +}; + +static struct resource gpmi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_GPMI_PHYS, + .end = REGS_GPMI_PHYS + REGS_GPMI_SIZE, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_GPMI_DMA, + .end = IRQ_GPMI_DMA, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH), + }, +}; + +struct platform_device stmp3xxx_gpmi = { + .name = "gpmi", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = gpmi_resources, + .num_resources = ARRAY_SIZE(gpmi_resources), +}; + +static struct resource mmc1_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = REGS_SSP1_PHYS, + .end = REGS_SSP1_PHYS + REGS_SSP_SIZE, + }, { + .flags = IORESOURCE_DMA, + .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_SSP1_DMA, + .end = IRQ_SSP1_DMA, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_SSP_ERROR, + .end = IRQ_SSP_ERROR, + }, +}; + +struct platform_device stmp3xxx_mmc = { + .name = "stmp3xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = mmc1_resource, + .num_resources = ARRAY_SIZE(mmc1_resource), +}; + +static struct resource usb_resources[] = { + { + .start = REGS_USBCTRL_PHYS, + .end = REGS_USBCTRL_PHYS + SZ_4K, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_USB_CTRL, + .end = IRQ_USB_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_udc = { + .name = "fsl-usb2-udc", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), +}; + +struct platform_device stmp3xxx_ehci = { + .name = "fsl-ehci", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), +}; + +static struct resource rtc_resources[] = { + { + .start = REGS_RTC_PHYS, + .end = REGS_RTC_PHYS + REGS_RTC_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_RTC_ALARM, + .end = IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_RTC_1MSEC, + .end = IRQ_RTC_1MSEC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_rtc = { + .name = "stmp3xxx-rtc", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static struct resource ssp1_resources[] = { + { + .start = REGS_SSP1_PHYS, + .end = REGS_SSP1_PHYS + REGS_SSP_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_SSP1_DMA, + .end = IRQ_SSP1_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH), + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource ssp2_resources[] = { + { + .start = REGS_SSP2_PHYS, + .end = REGS_SSP2_PHYS + REGS_SSP_SIZE, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_SSP2_DMA, + .end = IRQ_SSP2_DMA, + .flags = IORESOURCE_IRQ, + }, { + .start = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH), + .end = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH), + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device stmp3xxx_spi1 = { + .name = "stmp3xxx_ssp", + .id = 1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssp1_resources, + .num_resources = ARRAY_SIZE(ssp1_resources), +}; + +struct platform_device stmp3xxx_spi2 = { + .name = "stmp3xxx_ssp", + .id = 2, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssp2_resources, + .num_resources = ARRAY_SIZE(ssp2_resources), +}; + +static struct resource fb_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_LCDIF_DMA, + .end = IRQ_LCDIF_DMA, + }, { + .flags = IORESOURCE_IRQ, + .start = IRQ_LCDIF_ERROR, + .end = IRQ_LCDIF_ERROR, + }, { + .flags = IORESOURCE_MEM, + .start = REGS_LCDIF_PHYS, + .end = REGS_LCDIF_PHYS + REGS_LCDIF_SIZE, + }, +}; + +struct platform_device stmp3xxx_framebuffer = { + .name = "stmp3xxx-fb", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(fb_resource), + .resource = fb_resource, +}; + +#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2) \ + static char *cmdline_device_##name; \ + static int cmdline_device_##name##_setup(char *dev) \ + { \ + cmdline_device_##name = dev + 1; \ + return 0; \ + } \ + __setup(#name, cmdline_device_##name##_setup); \ + int stmp3xxx_##name##_device_register(void) \ + { \ + struct platform_device *d = NULL; \ + if (!cmdline_device_##name || \ + !strcmp(cmdline_device_##name, #dev1)) \ + d = &stmp3xxx_##dev1; \ + else if (!strcmp(cmdline_device_##name, #dev2)) \ + d = &stmp3xxx_##dev2; \ + else \ + printk(KERN_ERR"Unknown %s assignment '%s'.\n", \ + #name, cmdline_device_##name); \ + return d ? platform_device_register(d) : -ENOENT; \ + } + +CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1) +CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2) + +struct platform_device stmp3xxx_backlight = { + .name = "stmp3xxx-bl", + .id = -1, +}; + +struct platform_device stmp3xxx_rotdec = { + .name = "stmp3xxx-rotdec", + .id = -1, +}; + +struct platform_device stmp3xxx_persistent = { + .name = "stmp3xxx-persistent", + .id = -1, +}; + +struct platform_device stmp3xxx_dcp_bootstream = { + .name = "stmp3xxx-dcpboot", + .id = -1, + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource dcp_resources[] = { + { + .start = IRQ_DCP_VMI, + .end = IRQ_DCP_VMI, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DCP, + .end = IRQ_DCP, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device stmp3xxx_dcp = { + .name = "stmp3xxx-dcp", + .id = -1, + .resource = dcp_resources, + .num_resources = ARRAY_SIZE(dcp_resources), + .dev = { + .dma_mask = &common_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource battery_resource[] = { + { + .flags = IORESOURCE_IRQ, + .start = IRQ_VDD5V, + .end = IRQ_VDD5V, + }, +}; + +struct platform_device stmp3xxx_battery = { + .name = "stmp3xxx-battery", + .resource = battery_resource, + .num_resources = ARRAY_SIZE(battery_resource), +}; diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c new file mode 100644 index 00000000000..d2f497764dc --- /dev/null +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -0,0 +1,463 @@ +/* + * DMA helper routines for Freescale STMP37XX/STMP378X + * + * Author: dmitry pervushin <dpervushin@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/sysdev.h> +#include <linux/cpufreq.h> + +#include <asm/page.h> + +#include <mach/platform.h> +#include <mach/dma.h> +#include <mach/regs-apbx.h> +#include <mach/regs-apbh.h> + +static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command); +static const size_t pool_alignment = 8; +static struct stmp3xxx_dma_user { + void *pool; + int inuse; + const char *name; +} channels[MAX_DMA_CHANNELS]; + +#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS) +#define IS_USED(ch) (channels[ch].inuse) + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name) +{ + struct stmp3xxx_dma_user *user; + int err = 0; + + user = channels + ch; + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (IS_USED(ch)) { + err = -EBUSY; + goto out; + } + /* Create a pool to allocate dma commands from */ + user->pool = dma_pool_create(name, dev, pool_item_size, + pool_alignment, PAGE_SIZE); + if (user->pool == NULL) { + err = -ENOMEM; + goto out; + } + user->name = name; + user->inuse++; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_request); + +int stmp3xxx_dma_release(int ch) +{ + struct stmp3xxx_dma_user *user = channels + ch; + int err = 0; + + if (!IS_VALID_CHANNEL(ch)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(ch)) { + err = -EBUSY; + goto out; + } + BUG_ON(user->pool == NULL); + dma_pool_destroy(user->pool); + user->inuse--; +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_release); + +int stmp3xxx_dma_read_semaphore(int channel) +{ + int sem = -1; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA + + STMP3XXX_DMA_CHANNEL(channel) * 0x70); + sem &= BM_APBH_CHn_SEMA_PHORE; + sem >>= BP_APBH_CHn_SEMA_PHORE; + break; + + case STMP3XXX_BUS_APBX: + sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA + + STMP3XXX_DMA_CHANNEL(channel) * 0x70); + sem &= BM_APBX_CHn_SEMA_PHORE; + sem >>= BP_APBX_CHn_SEMA_PHORE; + break; + default: + BUG(); + } + return sem; +} +EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore); + +int stmp3xxx_dma_allocate_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + struct stmp3xxx_dma_user *user = channels + channel; + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + if (descriptor == NULL) { + err = -EINVAL; + goto out; + } + + /* Allocate memory for a command from the buffer */ + descriptor->command = + dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle); + + /* Check it worked */ + if (!descriptor->command) { + err = -ENOMEM; + goto out; + } + + memset(descriptor->command, 0, pool_item_size); +out: + WARN_ON(err); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_allocate_command); + +int stmp3xxx_dma_free_command(int channel, + struct stmp3xxx_dma_descriptor *descriptor) +{ + int err = 0; + + if (!IS_VALID_CHANNEL(channel)) { + err = -ENODEV; + goto out; + } + if (!IS_USED(channel)) { + err = -EBUSY; + goto out; + } + + /* Return the command memory to the pool */ + dma_pool_free(channels[channel].pool, descriptor->command, + descriptor->handle); + + /* Initialise descriptor so we're not tempted to use it */ + descriptor->command = NULL; + descriptor->handle = 0; + descriptor->virtual_buf_ptr = NULL; + descriptor->next_descr = NULL; + + WARN_ON(err); +out: + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_free_command); + +void stmp3xxx_dma_go(int channel, + struct stmp3xxx_dma_descriptor *head, u32 semaphore) +{ + int ch = STMP3XXX_DMA_CHANNEL(channel); + void __iomem *c, *s; + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch; + s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch; + break; + + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch; + s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch; + break; + + default: + return; + } + + /* Set next command */ + __raw_writel(head->handle, c); + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + __raw_writel(semaphore, s); +} +EXPORT_SYMBOL(stmp3xxx_dma_go); + +int stmp3xxx_dma_running(int channel) +{ + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA + + 0x70 * STMP3XXX_DMA_CHANNEL(channel))) & + BM_APBH_CHn_SEMA_PHORE; + + case STMP3XXX_BUS_APBX: + return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA + + 0x70 * STMP3XXX_DMA_CHANNEL(channel))) & + BM_APBX_CHn_SEMA_PHORE; + default: + BUG(); + return 0; + } +} +EXPORT_SYMBOL(stmp3xxx_dma_running); + +/* + * Circular dma chain management + */ +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain) +{ + int i; + + for (i = 0; i < chain->total_count; i++) + stmp3xxx_dma_free_command( + STMP3XXX_DMA(chain->channel, chain->bus), + &chain->chain[i]); +} +EXPORT_SYMBOL(stmp3xxx_dma_free_chain); + +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items) +{ + int i; + int err = 0; + + if (items == 0) + return err; + + for (i = 0; i < items; i++) { + err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]); + if (err) { + WARN_ON(err); + /* + * Couldn't allocate the whole chain. + * deallocate what has been allocated + */ + if (i) { + do { + stmp3xxx_dma_free_command(ch, + &descriptors + [i]); + } while (i-- >= 0); + } + return err; + } + + /* link them! */ + if (i > 0) { + descriptors[i - 1].next_descr = &descriptors[i]; + descriptors[i - 1].command->next = + descriptors[i].handle; + } + } + + /* make list circular */ + descriptors[items - 1].next_descr = &descriptors[0]; + descriptors[items - 1].command->next = descriptors[0].handle; + + chain->total_count = items; + chain->chain = descriptors; + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = items; + chain->active_count = 0; + chain->cooked_count = 0; + chain->bus = STMP3XXX_DMA_BUS(ch); + chain->channel = STMP3XXX_DMA_CHANNEL(ch); + return err; +} +EXPORT_SYMBOL(stmp3xxx_dma_make_chain); + +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain) +{ + BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus))); + chain->free_index = 0; + chain->active_index = 0; + chain->cooked_index = 0; + chain->free_count = chain->total_count; + chain->active_count = 0; + chain->cooked_count = 0; +} +EXPORT_SYMBOL(stmp37xx_circ_clear_chain); + +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + BUG_ON(chain->cooked_count < count); + + chain->cooked_count -= count; + chain->cooked_index += count; + chain->cooked_index %= chain->total_count; + chain->free_count += count; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_free); + +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count) +{ + void __iomem *c; + u32 mask_clr, mask; + BUG_ON(chain->free_count < count); + + chain->free_count -= count; + chain->free_index += count; + chain->free_index %= chain->total_count; + chain->active_count += count; + + switch (chain->bus) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel; + mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA; + mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA); + break; + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel; + mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA; + mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA); + break; + default: + BUG(); + return; + } + + /* Set counting semaphore (kicks off transfer). Assumes + peripheral has been set up correctly */ + stmp3xxx_clearl(mask_clr, c); + stmp3xxx_setl(mask, c); +} +EXPORT_SYMBOL(stmp37xx_circ_advance_active); + +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain) +{ + unsigned cooked; + + cooked = chain->active_count - + stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus)); + + chain->active_count -= cooked; + chain->active_index += cooked; + chain->active_index %= chain->total_count; + + chain->cooked_count += cooked; + + return cooked; +} +EXPORT_SYMBOL(stmp37xx_circ_advance_cooked); + +void stmp3xxx_dma_set_alt_target(int channel, int function) +{ +#if defined(CONFIG_ARCH_STMP37XX) + unsigned bits = 4; +#elif defined(CONFIG_ARCH_STMP378X) + unsigned bits = 2; +#else +#error wrong arch +#endif + int shift = STMP3XXX_DMA_CHANNEL(channel) * bits; + unsigned mask = (1<<bits) - 1; + void __iomem *c; + + BUG_ON(function < 0 || function >= (1<<bits)); + pr_debug("%s: channel = %d, using mask %x, " + "shift = %d\n", __func__, channel, mask, shift); + + switch (STMP3XXX_DMA_BUS(channel)) { + case STMP3XXX_BUS_APBH: + c = REGS_APBH_BASE + HW_APBH_DEVSEL; + break; + case STMP3XXX_BUS_APBX: + c = REGS_APBX_BASE + HW_APBX_DEVSEL; + break; + default: + BUG(); + } + stmp3xxx_clearl(mask << shift, c); + stmp3xxx_setl(mask << shift, c); +} +EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target); + +void stmp3xxx_dma_suspend(void) +{ + stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0); +} + +void stmp3xxx_dma_resume(void) +{ + stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST, + REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST, + REGS_APBX_BASE + HW_APBX_CTRL0); +} + +#ifdef CONFIG_CPU_FREQ + +struct dma_notifier_block { + struct notifier_block nb; + void *data; +}; + +static int dma_cpufreq_notifier(struct notifier_block *self, + unsigned long phase, void *p) +{ + switch (phase) { + case CPUFREQ_POSTCHANGE: + stmp3xxx_dma_resume(); + break; + + case CPUFREQ_PRECHANGE: + stmp3xxx_dma_suspend(); + break; + + default: + break; + } + + return NOTIFY_DONE; +} + +static struct dma_notifier_block dma_cpufreq_nb = { + .nb = { + .notifier_call = dma_cpufreq_notifier, + }, +}; +#endif /* CONFIG_CPU_FREQ */ + +void __init stmp3xxx_dma_init(void) +{ + stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST, + REGS_APBH_BASE + HW_APBH_CTRL0); + stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST, + REGS_APBX_BASE + HW_APBX_CTRL0); +#ifdef CONFIG_CPU_FREQ + cpufreq_register_notifier(&dma_cpufreq_nb.nb, + CPUFREQ_TRANSITION_NOTIFIER); +#endif /* CONFIG_CPU_FREQ */ +} diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h new file mode 100644 index 00000000000..f9c39772d7c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h new file mode 100644 index 00000000000..b4e205b95f2 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h @@ -0,0 +1,33 @@ +/* + * Freescale STMP37XX/STMP378X CPU type detection + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_CPU_H +#define __ASM_PLAT_CPU_H + +#ifdef CONFIG_ARCH_STMP37XX +#define cpu_is_stmp37xx() (1) +#else +#define cpu_is_stmp37xx() (0) +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define cpu_is_stmp378x() (1) +#else +#define cpu_is_stmp378x() (0) +#endif + +#endif /* __ASM_PLAT_CPU_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S new file mode 100644 index 00000000000..fb3b969bf0a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -0,0 +1,42 @@ +/* + * Debugging macro include header + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical base address + addeq \rx, \rx, #0x00070000 + movne \rx, #0xf0000000 @ virtual base + addne \rx, \rx, #0x00070000 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0] @ data register at 0 + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h new file mode 100644 index 00000000000..7c58557c676 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h @@ -0,0 +1,153 @@ +/* + * Freescale STMP37XX/STMP378X DMA helper interface + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_DMA_H +#define __ASM_PLAT_STMP3XXX_DMA_H + +#include <linux/platform_device.h> +#include <linux/dmapool.h> + +#if !defined(MAX_PIO_WORDS) +#define MAX_PIO_WORDS (15) +#endif + +#define STMP3XXX_BUS_APBH 0 +#define STMP3XXX_BUS_APBX 1 +#define STMP3XXX_DMA_MAX_CHANNEL 16 +#define STMP3XXX_DMA_BUS(dma) ((dma) / 16) +#define STMP3XXX_DMA_CHANNEL(dma) ((dma) % 16) +#define STMP3XXX_DMA(channel, bus) ((bus) * 16 + (channel)) +#define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 32 + +struct stmp3xxx_dma_command { + u32 next; + u32 cmd; + union { + u32 buf_ptr; + u32 alternate; + }; + u32 pio_words[MAX_PIO_WORDS]; +}; + +struct stmp3xxx_dma_descriptor { + struct stmp3xxx_dma_command *command; + dma_addr_t handle; + + /* The virtual address of the buffer pointer */ + void *virtual_buf_ptr; + /* The next descriptor in a the DMA chain (optional) */ + struct stmp3xxx_dma_descriptor *next_descr; +}; + +struct stmp37xx_circ_dma_chain { + unsigned total_count; + struct stmp3xxx_dma_descriptor *chain; + + unsigned free_index; + unsigned free_count; + unsigned active_index; + unsigned active_count; + unsigned cooked_index; + unsigned cooked_count; + + int bus; + unsigned channel; +}; + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->free_index]); +} + +static inline struct stmp3xxx_dma_descriptor + *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain) +{ + return &(chain->chain[chain->cooked_index]); +} + +int stmp3xxx_dma_request(int ch, struct device *dev, const char *name); +int stmp3xxx_dma_release(int ch); +int stmp3xxx_dma_allocate_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +int stmp3xxx_dma_free_command(int ch, + struct stmp3xxx_dma_descriptor *descriptor); +void stmp3xxx_dma_continue(int channel, u32 semaphore); +void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head, + u32 semaphore); +int stmp3xxx_dma_running(int ch); +int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain, + struct stmp3xxx_dma_descriptor descriptors[], + unsigned items); +void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain); +void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain, + unsigned count); +unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain); +int stmp3xxx_dma_read_semaphore(int ch); +void stmp3xxx_dma_init(void); +void stmp3xxx_dma_set_alt_target(int ch, int target); +void stmp3xxx_dma_suspend(void); +void stmp3xxx_dma_resume(void); + +/* + * STMP37xx and STMP378x have different DMA control + * registers layout + */ + +void stmp3xxx_arch_dma_freeze(int ch); +void stmp3xxx_arch_dma_unfreeze(int ch); +void stmp3xxx_arch_dma_reset_channel(int ch); +void stmp3xxx_arch_dma_enable_interrupt(int ch); +void stmp3xxx_arch_dma_clear_interrupt(int ch); +int stmp3xxx_arch_dma_is_interrupt(int ch); + +static inline void stmp3xxx_dma_reset_channel(int ch) +{ + stmp3xxx_arch_dma_reset_channel(ch); +} + + +static inline void stmp3xxx_dma_freeze(int ch) +{ + stmp3xxx_arch_dma_freeze(ch); +} + +static inline void stmp3xxx_dma_unfreeze(int ch) +{ + stmp3xxx_arch_dma_unfreeze(ch); +} + +static inline void stmp3xxx_dma_enable_interrupt(int ch) +{ + stmp3xxx_arch_dma_enable_interrupt(ch); +} + +static inline void stmp3xxx_dma_clear_interrupt(int ch) +{ + stmp3xxx_arch_dma_clear_interrupt(ch); +} + +static inline int stmp3xxx_dma_is_interrupt(int ch) +{ + return stmp3xxx_arch_dma_is_interrupt(ch); +} + +#endif /* __ASM_PLAT_STMP3XXX_DMA_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h new file mode 100644 index 00000000000..a8b57925617 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h @@ -0,0 +1,28 @@ +/* + * Freescale STMP37XX/STMP378X GPIO interface + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#define ARCH_NR_GPIOS (32 * 3) +#define gpio_to_irq(gpio) __gpio_to_irq(gpio) +#define gpio_get_value(gpio) __gpio_get_value(gpio) +#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h new file mode 100644 index 00000000000..e166432910a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h @@ -0,0 +1,12 @@ +#ifndef __MACH_GPMI_H + +#include <linux/mtd/partitions.h> +#include <mach/regs-gpmi.h> + +struct gpmi_platform_data { + void *pins; + int nr_parts; + struct mtd_partition *parts; + const char *part_types[]; +}; +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h new file mode 100644 index 00000000000..47b8978405b --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h @@ -0,0 +1,32 @@ +/* + * This file contains the hardware definitions of the Freescale STMP3XXX + * + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * Where in virtual memory the IO devices (timers, system controllers + * and so on) + */ +#define IO_BASE 0xF0000000 /* VA of IO */ +#define IO_SIZE 0x00100000 /* How much? */ +#define IO_START 0x80000000 /* PA of IO */ + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h new file mode 100644 index 00000000000..d08b1b7f3d1 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/io.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h new file mode 100644 index 00000000000..7b875a07a1a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h @@ -0,0 +1,22 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x40000000) + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h new file mode 100644 index 00000000000..ba81e154376 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h @@ -0,0 +1,14 @@ +#ifndef _MACH_MMC_H +#define _MACH_MMC_H + +#include <mach/regs-ssp.h> + +struct stmp3xxxmmc_platform_data { + int (*get_wp)(void); + unsigned long (*setclock)(void __iomem *base, unsigned long); + void (*cmd_pullup)(int); + int (*hw_init)(void); + void (*hw_release)(void); +}; + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h new file mode 100644 index 00000000000..cc5af82279a --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h @@ -0,0 +1,157 @@ +/* + * Freescale STMP37XX/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __PINMUX_H +#define __PINMUX_H + +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/gpio.h> +#include <asm-generic/gpio.h> + +/* Pin definitions */ +#include "pins.h" +#include <mach/pins.h> + +/* + * Each pin may be routed up to four different HW interfaces + * including GPIO + */ +enum pin_fun { + PIN_FUN1 = 0, + PIN_FUN2, + PIN_FUN3, + PIN_GPIO, +}; + +/* + * Each pin may have different output drive strength in range from + * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths. + */ +enum pin_strength { + PIN_4MA = 0, + PIN_8MA, + PIN_12MA, + PIN_16MA, + PIN_20MA, +}; + +/* + * Each pin can be programmed for 1.8V or 3.3V + */ +enum pin_voltage { + PIN_1_8V = 0, + PIN_3_3V, +}; + +/* + * Structure to define a group of pins and their parameters + */ +struct pin_desc { + unsigned id; + enum pin_fun fun; + enum pin_strength strength; + enum pin_voltage voltage; + unsigned pullup:1; +}; + +struct pin_group { + struct pin_desc *pins; + int nr_pins; +}; + +/* Set pin drive strength */ +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label); + +/* Set pin voltage */ +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label); + +/* Enable pull-up resistor for a pin */ +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label); + +/* + * Request a pin ownership, only one module (identified by @label) + * may own a pin. + */ +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label); + +/* Release pin */ +void stmp3xxx_release_pin(unsigned id, const char *label); + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun); + +/* + * Each bank is associated with a number of registers to control + * pin function, drive strength, voltage and pull-up reigster. The + * number of registers of a given type depends on the number of bits + * describin particular pin. + */ +#define HW_MUXSEL_NUM 2 /* registers per bank */ +#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */ +#define HW_MUXSEL_PIN_NUM 16 /* pins per register */ +#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */ +#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */ + +#define HW_DRIVE_NUM 4 /* registers per bank */ +#define HW_DRIVE_PIN_LEN 4 /* bits per pin */ +#define HW_DRIVE_PIN_NUM 8 /* pins per register */ +#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */ +#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */ +#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */ + + +struct stmp3xxx_pinmux_bank { + struct gpio_chip chip; + + /* Pins allocation map */ + unsigned long pin_map; + + /* Pin owner names */ + const char *pin_labels[32]; + + /* Bank registers */ + void __iomem *hw_muxsel[HW_MUXSEL_NUM]; + void __iomem *hw_drive[HW_DRIVE_NUM]; + void __iomem *hw_pull; + + void __iomem *pin2irq, + *irqlevel, + *irqpolarity, + *irqen, + *irqstat; + + /* HW MUXSEL register function bit values */ + u8 functions[HW_MUXSEL_PINFUN_NUM]; + + /* + * HW DRIVE register strength bit values: + * 0xff - requested strength is not supported for this bank + */ + u8 strengths[HW_DRIVE_PINDRV_NUM]; + + /* GPIO things */ + void __iomem *hw_gpio_in, + *hw_gpio_out, + *hw_gpio_doe; + int irq, virq; +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start); + +#endif /* __PINMUX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h new file mode 100644 index 00000000000..c573318e1ca --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h @@ -0,0 +1,30 @@ +/* + * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PINS_H +#define __ASM_PLAT_PINS_H + +#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin) +#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32) +#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32) + +/* + * Special invalid pin identificator to show a pin doesn't exist + */ +#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF) + +#endif /* __ASM_PLAT_PINS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h new file mode 100644 index 00000000000..7007ddaa91e --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h @@ -0,0 +1,68 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_PLATFORM_H +#define __ASM_PLAT_PLATFORM_H + +#ifndef __ASSEMBLER__ +#include <linux/io.h> +#endif +#include <asm/sizes.h> + +/* Virtual address where registers are mapped */ +#define STMP3XXX_REGS_PHBASE 0x80000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_REGS_BASE 0xF0000000 +#else +#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000 +#endif +#define STMP3XXX_REGS_SIZE SZ_1M + +/* Virtual address where OCRAM is mapped */ +#define STMP3XXX_OCRAM_PHBASE 0x00000000 +#ifdef __ASSEMBLER__ +#define STMP3XXX_OCRAM_BASE 0xf1000000 +#else +#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000 +#endif +#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K) + +#ifdef CONFIG_ARCH_STMP37XX +#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR +#endif + +#ifdef CONFIG_ARCH_STMP378X +#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD +#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR +#endif + +#define HW_STMP3XXX_SET 0x04 +#define HW_STMP3XXX_CLR 0x08 +#define HW_STMP3XXX_TOG 0x0c + +#ifndef __ASSEMBLER__ +static inline void stmp3xxx_clearl(u32 v, void __iomem *r) +{ + __raw_writel(v, r + HW_STMP3XXX_CLR); +} + +static inline void stmp3xxx_setl(u32 v, void __iomem *r) +{ + __raw_writel(v, r + HW_STMP3XXX_SET); +} +#endif + +#define BF(value, field) (((value) << BP_##field) & BM_##field) + +#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h new file mode 100644 index 00000000000..2e300feaa4c --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h @@ -0,0 +1,54 @@ +/* + * Freescale STMP37XX/STMP378X core structure and function declarations + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_STMP3XXX_H +#define __ASM_PLAT_STMP3XXX_H + +#include <linux/irq.h> + +extern struct sys_timer stmp3xxx_timer; + +void stmp3xxx_init_irq(struct irq_chip *chip); +void stmp3xxx_init(void); +int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable); +extern struct platform_device stmp3xxx_dbguart, + stmp3xxx_appuart, + stmp3xxx_watchdog, + stmp3xxx_touchscreen, + stmp3xxx_keyboard, + stmp3xxx_gpmi, + stmp3xxx_mmc, + stmp3xxx_udc, + stmp3xxx_ehci, + stmp3xxx_rtc, + stmp3xxx_spi1, + stmp3xxx_spi2, + stmp3xxx_backlight, + stmp3xxx_rotdec, + stmp3xxx_dcp, + stmp3xxx_dcp_bootstream, + stmp3xxx_persistent, + stmp3xxx_framebuffer, + stmp3xxx_battery; +int stmp3xxx_ssp1_device_register(void); +int stmp3xxx_ssp2_device_register(void); + +struct pin_group; +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label); +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label); + +#endif /* __ASM_PLAT_STMP3XXX_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h new file mode 100644 index 00000000000..28a98888931 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/system.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2005 Sigmatel Inc + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include <asm/proc-fns.h> +#include <mach/platform.h> +#include <mach/regs-clkctrl.h> +#include <mach/regs-power.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + /* Set BATTCHRG to default value */ + __raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE); + + /* Set MINPWR to default value */ + __raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR); + + /* Reset digital side of chip (but not power or RTC) */ + __raw_writel(BM_CLKCTRL_RESET_DIG, + REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET); + + /* Should not return */ +} + +#endif diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h new file mode 100644 index 00000000000..3373985d7a8 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 1999 ARM Limited + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * System time clock is sourced from the 32k clock + */ +#define CLOCK_TICK_RATE (32768) diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h new file mode 100644 index 00000000000..f79f5ee56cd --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h @@ -0,0 +1,53 @@ +/* + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +/* + * Register includes are for when the MMU enabled; we need to define our + * own stuff here for pre-MMU use + */ +#define UARTDBG_BASE 0x80070000 +#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c]) + +/* + * This does not append a newline + */ +static void putc(char c) +{ + /* Wait for TX fifo empty */ + while ((UART(6) & (1<<7)) == 0) + continue; + + /* Write byte */ + UART(0) = c; + + /* Wait for last bit to exit the UART */ + while (UART(6) & (1<<3)) + continue; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h new file mode 100644 index 00000000000..541b880c186 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h @@ -0,0 +1,12 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define VMALLOC_END (0xF0000000) diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c new file mode 100644 index 00000000000..20de4e0401e --- /dev/null +++ b/arch/arm/plat-stmp3xxx/irq.c @@ -0,0 +1,51 @@ +/* + * Freescale STMP37XX/STMP378X common interrupt handling code + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/sysdev.h> + +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/regs-icoll.h> + +void __init stmp3xxx_init_irq(struct irq_chip *chip) +{ + unsigned int i, lv; + + /* Reset the interrupt controller */ + stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true); + + /* Disable all interrupts initially */ + for (i = 0; i < NR_REAL_IRQS; i++) { + chip->mask(i); + set_irq_chip(i, chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + } + + /* Ensure vector is cleared */ + for (lv = 0; lv < 4; lv++) + __raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK); + __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR); + + /* Barrier */ + (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT); +} + diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c new file mode 100644 index 00000000000..d4120038220 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/pinmux.c @@ -0,0 +1,552 @@ +/* + * Freescale STMP378X/STMP378X Pin Multiplexing + * + * Author: Vladislav Buzov <vbuzov@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#define DEBUG +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/sysdev.h> +#include <linux/string.h> +#include <linux/bitops.h> +#include <linux/sysdev.h> +#include <linux/irq.h> + +#include <mach/hardware.h> +#include <mach/platform.h> +#include <mach/regs-pinctrl.h> +#include <mach/pins.h> +#include <mach/pinmux.h> + +#define NR_BANKS ARRAY_SIZE(pinmux_banks) +static struct stmp3xxx_pinmux_bank pinmux_banks[] = { + [0] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0, + .irq = IRQ_GPIO0, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0, + }, + [1] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1, + .irq = IRQ_GPIO1, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1, + }, + [2] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2, + .functions = { 0x0, 0x1, 0x2, 0x3 }, + .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 }, + + .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2, + .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2, + .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2, + .irq = IRQ_GPIO2, + + .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2, + .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2, + .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2, + .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2, + .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2, + }, + [3] = { + .hw_muxsel = { + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6, + REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7, + }, + .hw_drive = { + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13, + REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14, + NULL, + }, + .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3, + .functions = {0x0, 0x1, 0x2, 0x3}, + .strengths = {0x0, 0x1, 0x2, 0x3, 0xff}, + }, +}; + +static inline struct stmp3xxx_pinmux_bank * +stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin) +{ + unsigned b, p; + + b = STMP3XXX_PINID_TO_BANK(id); + p = STMP3XXX_PINID_TO_PINNUM(id); + BUG_ON(b >= NR_BANKS); + if (bank) + *bank = b; + if (pin) + *pin = p; + return &pinmux_banks[b]; +} + +/* Check if requested pin is owned by caller */ +static int stmp3xxx_check_pin(unsigned id, const char *label) +{ + unsigned pin; + struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin); + + if (!test_bit(pin, &pm->pin_map)) { + printk(KERN_WARNING + "%s: Accessing free pin %x, caller %s\n", + __func__, id, label); + + return -EINVAL; + } + + if (label && pm->pin_labels[pin] && + strcmp(label, pm->pin_labels[pin])) { + printk(KERN_WARNING + "%s: Wrong pin owner %x, caller %s owner %s\n", + __func__, id, label, pm->pin_labels[pin]); + + return -EINVAL; + } + return 0; +} + +void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label, + bank, pin, strength); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + val = pbank->strengths[strength]; + if (val == 0xff) { + printk(KERN_WARNING + "%s: strength is not supported for bank %d, caller %s", + __func__, bank, label); + return; + } + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: writing 0x%x to 0x%p register\n", __func__, + val << shift, hwdrive); + stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive); + stmp3xxx_setl(val << shift, hwdrive); +} + +void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage, + const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwdrive; + u32 shift; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label, + bank, pin, voltage); + + hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM]; + shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, HW_DRIVE_PINV_MASK << shift, hwdrive); + if (voltage == PIN_1_8V) + stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive); + else + stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive); +} + +void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwpull; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label, + bank, pin, enable); + + hwpull = pbank->hw_pull; + + if (stmp3xxx_check_pin(id, label)) + return; + + pr_debug("%s: changing 0x%x bit in 0x%p register\n", + __func__, 1 << pin, hwpull); + if (enable) + stmp3xxx_setl(1 << pin, hwpull); + else + stmp3xxx_clearl(1 << pin, hwpull); +} + +int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + int ret = 0; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label, + bank, pin, fun); + + if (test_bit(pin, &pbank->pin_map)) { + printk(KERN_WARNING + "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n", + __func__, bank, pin, label, pbank->pin_labels[pin]); + return -EBUSY; + } + + set_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = label; + + stmp3xxx_set_pin_type(id, fun); + + return ret; +} + +void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun) +{ + struct stmp3xxx_pinmux_bank *pbank; + void __iomem *hwmux; + u32 shift, val; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + + hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + + val = pbank->functions[fun]; + shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN; + pr_debug("%s: writing 0x%x to 0x%p register\n", + __func__, val << shift, hwmux); + stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux); + stmp3xxx_setl(val << shift, hwmux); +} + +void stmp3xxx_release_pin(unsigned id, const char *label) +{ + struct stmp3xxx_pinmux_bank *pbank; + u32 bank, pin; + + pbank = stmp3xxx_pinmux_bank(id, &bank, &pin); + pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin); + + if (stmp3xxx_check_pin(id, label)) + return; + + clear_bit(pin, &pbank->pin_map); + pbank->pin_labels[pin] = NULL; +} + +int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + int err = 0; + + /* Allocate and configure pins */ + for (p = 0; p < pin_group->nr_pins; p++) { + pr_debug("%s: #%d\n", __func__, p); + pin = &pin_group->pins[p]; + + err = stmp3xxx_request_pin(pin->id, pin->fun, label); + if (err) + goto out_err; + + stmp3xxx_pin_strength(pin->id, pin->strength, label); + stmp3xxx_pin_voltage(pin->id, pin->voltage, label); + stmp3xxx_pin_pullup(pin->id, pin->pullup, label); + } + + return 0; + +out_err: + /* Release allocated pins in case of error */ + while (--p >= 0) { + pr_debug("%s: releasing #%d\n", __func__, p); + stmp3xxx_release_pin(pin_group->pins[p].id, label); + } + return err; +} +EXPORT_SYMBOL(stmp3xxx_request_pin_group); + +void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label) +{ + struct pin_desc *pin; + int p; + + for (p = 0; p < pin_group->nr_pins; p++) { + pin = &pin_group->pins[p]; + stmp3xxx_release_pin(pin->id, label); + } +} +EXPORT_SYMBOL(stmp3xxx_release_pin_group); + +static int stmp3xxx_irq_to_gpio(int irq, + struct stmp3xxx_pinmux_bank **bank, unsigned *gpio) +{ + struct stmp3xxx_pinmux_bank *pm; + + for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++) + if (pm->virq <= irq && irq < pm->virq + 32) { + *bank = pm; + *gpio = irq - pm->virq; + return 0; + } + return -ENOENT; +} + +static int stmp3xxx_set_irqtype(unsigned irq, unsigned type) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + int l, p; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + switch (type) { + case IRQ_TYPE_EDGE_RISING: + l = 0; p = 1; break; + case IRQ_TYPE_EDGE_FALLING: + l = 0; p = 0; break; + case IRQ_TYPE_LEVEL_HIGH: + l = 1; p = 1; break; + case IRQ_TYPE_LEVEL_LOW: + l = 1; p = 0; break; + default: + pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n", + __func__, type); + return -ENXIO; + } + + if (l) + stmp3xxx_setl(1 << gpio, pm->irqlevel); + else + stmp3xxx_clearl(1 << gpio, pm->irqlevel); + if (p) + stmp3xxx_setl(1 << gpio, pm->irqpolarity); + else + stmp3xxx_clearl(1 << gpio, pm->irqpolarity); + return 0; +} + +static void stmp3xxx_pin_ack_irq(unsigned irq) +{ + u32 stat; + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stat = __raw_readl(pm->irqstat) & (1 << gpio); + stmp3xxx_clearl(stat, pm->irqstat); +} + +static void stmp3xxx_pin_mask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stmp3xxx_clearl(1 << gpio, pm->irqen); + stmp3xxx_clearl(1 << gpio, pm->pin2irq); +} + +static void stmp3xxx_pin_unmask_irq(unsigned irq) +{ + struct stmp3xxx_pinmux_bank *pm; + unsigned gpio; + + stmp3xxx_irq_to_gpio(irq, &pm, &gpio); + stmp3xxx_setl(1 << gpio, pm->irqen); + stmp3xxx_setl(1 << gpio, pm->pin2irq); +} + +static inline +struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip) +{ + return container_of(chip, struct stmp3xxx_pinmux_bank, chip); +} + +static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + return pm->virq + offset; +} + +static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + unsigned v; + + v = __raw_readl(pm->hw_gpio_in) & (1 << offset); + return v ? 1 : 0; +} + +static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + if (v) + stmp3xxx_setl(1 << offset, pm->hw_gpio_out); + else + stmp3xxx_clearl(1 << offset, pm->hw_gpio_out); +} + +static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + stmp3xxx_setl(1 << offset, pm->hw_gpio_doe); + stmp3xxx_gpio_set(chip, offset, v); + return 0; +} + +static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip); + + stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe); + return 0; +} + +static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio"); +} + +static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + stmp3xxx_release_pin(chip->base + offset, "gpio"); +} + +static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc) +{ + struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq); + int gpio_irq = pm->virq; + u32 stat = __raw_readl(pm->irqstat); + + while (stat) { + if (stat & 1) + irq_desc[gpio_irq].handle_irq(gpio_irq, + &irq_desc[gpio_irq]); + gpio_irq++; + stat >>= 1; + } +} + +static struct irq_chip gpio_irq_chip = { + .ack = stmp3xxx_pin_ack_irq, + .mask = stmp3xxx_pin_mask_irq, + .unmask = stmp3xxx_pin_unmask_irq, + .set_type = stmp3xxx_set_irqtype, +}; + +int __init stmp3xxx_pinmux_init(int virtual_irq_start) +{ + int b, r = 0; + struct stmp3xxx_pinmux_bank *pm; + int virq; + + for (b = 0; b < 3; b++) { + /* only banks 0,1,2 are allowed to GPIO */ + pm = pinmux_banks + b; + pm->chip.base = 32 * b; + pm->chip.ngpio = 32; + pm->chip.owner = THIS_MODULE; + pm->chip.can_sleep = 1; + pm->chip.exported = 1; + pm->chip.to_irq = stmp3xxx_gpio_to_irq; + pm->chip.direction_input = stmp3xxx_gpio_input; + pm->chip.direction_output = stmp3xxx_gpio_output; + pm->chip.get = stmp3xxx_gpio_get; + pm->chip.set = stmp3xxx_gpio_set; + pm->chip.request = stmp3xxx_gpio_request; + pm->chip.free = stmp3xxx_gpio_free; + pm->virq = virtual_irq_start + b * 32; + + for (virq = pm->virq; virq < pm->virq; virq++) { + gpio_irq_chip.mask(virq); + set_irq_chip(virq, &gpio_irq_chip); + set_irq_handler(virq, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); + } + r = gpiochip_add(&pm->chip); + if (r < 0) + break; + set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq); + set_irq_data(pm->irq, pm); + } + return r; +} + +MODULE_AUTHOR("Vladislav Buzov"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c new file mode 100644 index 00000000000..063c7bc0e74 --- /dev/null +++ b/arch/arm/plat-stmp3xxx/timer.c @@ -0,0 +1,189 @@ +/* + * System timer for Freescale STMP37XX/STMP378X + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/mach/time.h> +#include <mach/stmp3xxx.h> +#include <mach/platform.h> +#include <mach/regs-timrot.h> + +static irqreturn_t +stmp3xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* timer 0 */ + if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) & + BM_TIMROT_TIMCTRLn_IRQ) { + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + c->event_handler(c); + } + + /* timer 1 */ + else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1) + & BM_TIMROT_TIMCTRLn_IRQ) { + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + } + + return IRQ_HANDLED; +} + +static cycle_t stmp3xxx_clock_read(struct clocksource *cs) +{ + return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1) + & 0xFFFF0000) >> 16); +} + +static int +stmp3xxx_timrot_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + /* reload the timer */ + __raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + return 0; +} + +static void +stmp3xxx_timrot_set_mode(enum clock_event_mode mode, + struct clock_event_device *dev) +{ +} + +static struct clock_event_device ckevt_timrot = { + .name = "timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = stmp3xxx_timrot_set_next_event, + .set_mode = stmp3xxx_timrot_set_mode, +}; + +static struct clocksource cksrc_stmp3xxx = { + .name = "cksrc_stmp3xxx", + .rating = 250, + .read = stmp3xxx_clock_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 10, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static struct irqaction stmp3xxx_timer_irq = { + .name = "stmp3xxx_timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = stmp3xxx_timer_interrupt, + .dev_id = &ckevt_timrot, +}; + + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init stmp3xxx_init_timer(void) +{ + cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE, + cksrc_stmp3xxx.shift); + ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + ckevt_timrot.shift); + ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot); + ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot); + ckevt_timrot.cpumask = cpumask_of(0); + + stmp3xxx_reset_block(REGS_TIMROT_BASE, false); + + /* clear two timers */ + __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + + /* configure them */ + __raw_writel( + (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + __raw_writel( + (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + + __raw_writel(CLOCK_TICK_RATE / HZ - 1, + REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); + + setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq); + + clocksource_register(&cksrc_stmp3xxx); + clockevents_register_device(&ckevt_timrot); +} + +#ifdef CONFIG_PM + +void stmp3xxx_suspend_timer(void) +{ + stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE, + REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL); +} + +void stmp3xxx_resume_timer(void) +{ + stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE, + REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL); + __raw_writel( + 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0); + __raw_writel( + 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */ + BM_TIMROT_TIMCTRLn_RELOAD | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1); + __raw_writel(CLOCK_TICK_RATE / HZ - 1, + REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0); + __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1); +} + +#else + +#define stmp3xxx_suspend_timer NULL +#define stmp3xxx_resume_timer NULL + +#endif /* CONFIG_PM */ + +struct sys_timer stmp3xxx_timer = { + .init = stmp3xxx_init_timer, + .suspend = stmp3xxx_suspend_timer, + .resume = stmp3xxx_resume_timer, +}; |