diff options
| -rw-r--r-- | arch/avr32/kernel/asm-offsets.c | 2 | ||||
| -rw-r--r-- | arch/avr32/kernel/entry-avr32b.S | 275 | ||||
| -rw-r--r-- | arch/avr32/kernel/ptrace.c | 271 | ||||
| -rw-r--r-- | arch/avr32/kernel/vmlinux.lds.S | 2 | ||||
| -rw-r--r-- | include/asm-avr32/processor.h | 3 | ||||
| -rw-r--r-- | include/asm-avr32/thread_info.h | 12 |
6 files changed, 334 insertions, 231 deletions
diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c index 97d86586566..078cd33f467 100644 --- a/arch/avr32/kernel/asm-offsets.c +++ b/arch/avr32/kernel/asm-offsets.c @@ -21,5 +21,7 @@ void foo(void) OFFSET(TI_flags, thread_info, flags); OFFSET(TI_cpu, thread_info, cpu); OFFSET(TI_preempt_count, thread_info, preempt_count); + OFFSET(TI_rar_saved, thread_info, rar_saved); + OFFSET(TI_rsr_saved, thread_info, rsr_saved); OFFSET(TI_restart_block, thread_info, restart_block); } diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index d7b93f12d8f..df6c747658c 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -264,16 +264,7 @@ syscall_exit_work: 3: bld r1, TIF_BREAKPOINT brcc syscall_exit_cont - mfsr r3, SYSREG_TLBEHI - lddsp r2, sp[REG_PC] - andl r3, 0xff, COH - lsl r3, 1 - sbr r3, 30 - sbr r3, 0 - mtdr OCD_BWA2A, r2 - mtdr OCD_BWC2A, r3 - rjmp syscall_exit_cont - + rjmp enter_monitor_mode /* The slow path of the TLB miss handler */ page_table_not_present: @@ -288,11 +279,16 @@ page_not_present: rjmp ret_from_exception /* This function expects to find offending PC in SYSREG_RAR_EX */ + .type save_full_context_ex, @function + .align 2 save_full_context_ex: + mfsr r11, SYSREG_RAR_EX + sub r9, pc, . - debug_trampoline mfsr r8, SYSREG_RSR_EX + cp.w r9, r11 + breq 3f mov r12, r8 andh r8, (MODE_MASK >> 16), COH - mfsr r11, SYSREG_RAR_EX brne 2f 1: pushm r11, r12 /* PC and SR */ @@ -303,6 +299,21 @@ save_full_context_ex: stdsp sp[4], r10 /* replace saved SP */ rjmp 1b + /* + * The debug handler set up a trampoline to make us + * automatically enter monitor mode upon return, but since + * we're saving the full context, we must assume that the + * exception handler might want to alter the return address + * and/or status register. So we need to restore the original + * context and enter monitor mode manually after the exception + * has been handled. + */ +3: get_thread_info r8 + ld.w r11, r8[TI_rar_saved] + ld.w r12, r8[TI_rsr_saved] + rjmp 1b + .size save_full_context_ex, . - save_full_context_ex + /* Low-level exception handlers */ handle_critical: pushm r12 @@ -439,6 +450,7 @@ do_fpe_ll: ret_from_exception: mask_interrupts lddsp r4, sp[REG_SR] + andh r4, (MODE_MASK >> 16), COH brne fault_resume_kernel @@ -515,34 +527,76 @@ fault_exit_work: 2: bld r1, TIF_BREAKPOINT brcc fault_resume_user - mfsr r3, SYSREG_TLBEHI - lddsp r2, sp[REG_PC] - andl r3, 0xff, COH - lsl r3, 1 - sbr r3, 30 - sbr r3, 0 - mtdr OCD_BWA2A, r2 - mtdr OCD_BWC2A, r3 - rjmp fault_resume_user - - /* If we get a debug trap from privileged context we end up here */ -handle_debug_priv: - /* Fix up LR and SP in regs. r1 contains the mode we came from */ - mfsr r2, SYSREG_SR - mov r3, r2 - bfins r2, r1, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE - mtsr SYSREG_SR, r2 + rjmp enter_monitor_mode + + .section .kprobes.text, "ax", @progbits + .type handle_debug, @function +handle_debug: + sub sp, 4 /* r12_orig */ + stmts --sp, r0-lr + mfsr r8, SYSREG_RAR_DBG + mfsr r9, SYSREG_RSR_DBG + unmask_exceptions + pushm r8-r9 + bfextu r9, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE + brne debug_fixup_regs + +.Ldebug_fixup_cont: +#ifdef CONFIG_TRACE_IRQFLAGS + rcall trace_hardirqs_off +#endif + mov r12, sp + rcall do_debug + mov sp, r12 + + lddsp r2, sp[REG_SR] + bfextu r3, r2, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE + brne debug_resume_kernel + + get_thread_info r0 + ld.w r1, r0[TI_flags] + mov r2, _TIF_DBGWORK_MASK + tst r1, r2 + brne debug_exit_work + + bld r1, TIF_SINGLE_STEP + brcc 1f + mfdr r4, OCD_DC + sbr r4, OCD_DC_SS_BIT + mtdr OCD_DC, r4 + +1: popm r10,r11 + mask_exceptions + mtsr SYSREG_RSR_DBG, r11 + mtsr SYSREG_RAR_DBG, r10 +#ifdef CONFIG_TRACE_IRQFLAGS + rcall trace_hardirqs_on +1: +#endif + ldmts sp++, r0-lr + sub sp, -4 + retd + .size handle_debug, . - handle_debug + + /* Mode of the trapped context is in r9 */ + .type debug_fixup_regs, @function +debug_fixup_regs: + mfsr r8, SYSREG_SR + mov r10, r8 + bfins r8, r9, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE + mtsr SYSREG_SR, r8 sub pc, -2 stdsp sp[REG_LR], lr - mtsr SYSREG_SR, r3 + mtsr SYSREG_SR, r10 sub pc, -2 - sub r10, sp, -FRAME_SIZE_FULL - stdsp sp[REG_SP], r10 - mov r12, sp - rcall do_debug_priv + sub r8, sp, -FRAME_SIZE_FULL + stdsp sp[REG_SP], r8 + rjmp .Ldebug_fixup_cont + .size debug_fixup_regs, . - debug_fixup_regs - /* Now, put everything back */ - ssrf SR_EM_BIT + .type debug_resume_kernel, @function +debug_resume_kernel: + mask_exceptions popm r10, r11 mtsr SYSREG_RAR_DBG, r10 mtsr SYSREG_RSR_DBG, r11 @@ -553,93 +607,44 @@ handle_debug_priv: 1: #endif mfsr r2, SYSREG_SR - mov r3, r2 - bfins r2, r1, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE + mov r1, r2 + bfins r2, r3, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE mtsr SYSREG_SR, r2 sub pc, -2 popm lr - mtsr SYSREG_SR, r3 + mtsr SYSREG_SR, r1 sub pc, -2 sub sp, -4 /* skip SP */ popm r0-r12 sub sp, -4 retd + .size debug_resume_kernel, . - debug_resume_kernel + .type debug_exit_work, @function +debug_exit_work: /* - * At this point, everything is masked, that is, interrupts, - * exceptions and debugging traps. We might get called from - * interrupt or exception context in some rare cases, but this - * will be taken care of by do_debug(), so we're not going to - * do a 100% correct context save here. + * We must return from Monitor Mode using a retd, and we must + * not schedule since that involves the D bit in SR getting + * cleared by something other than the debug hardware. This + * may cause undefined behaviour according to the Architecture + * manual. + * + * So we fix up the return address and status and return to a + * stub below in Exception mode. From there, we can follow the + * normal exception return path. + * + * The real return address and status registers are stored on + * the stack in the way the exception return path understands, + * so no need to fix anything up there. */ -handle_debug: - sub sp, 4 /* r12_orig */ - stmts --sp, r0-lr - mfsr r0, SYSREG_RAR_DBG - mfsr r1, SYSREG_RSR_DBG -#ifdef CONFIG_TRACE_IRQFLAGS - rcall trace_hardirqs_off -#endif - unmask_exceptions - stm --sp, r0, r1 - bfextu r1, r1, SYSREG_MODE_OFFSET, SYSREG_MODE_SIZE - brne handle_debug_priv - - mov r12, sp - rcall do_debug - - lddsp r10, sp[REG_SR] - andh r10, (MODE_MASK >> 16), COH - breq debug_resume_user - -debug_restore_all: - popm r10,r11 - mask_exceptions - mtsr SYSREG_RSR_DBG, r11 - mtsr SYSREG_RAR_DBG, r10 -#ifdef CONFIG_TRACE_IRQFLAGS - bld r11, SYSREG_GM_OFFSET - brcc 1f - rcall trace_hardirqs_on -1: -#endif - ldmts sp++, r0-lr - sub sp, -4 + sub r8, pc, . - fault_exit_work + mtsr SYSREG_RAR_DBG, r8 + mov r9, 0 + orh r9, hi(SR_EM | SR_GM | MODE_EXCEPTION) + mtsr SYSREG_RSR_DBG, r9 + sub pc, -2 retd - -debug_resume_user: - get_thread_info r0 - mask_interrupts - - ld.w r1, r0[TI_flags] - andl r1, _TIF_DBGWORK_MASK, COH - breq debug_restore_all - -1: bld r1, TIF_NEED_RESCHED - brcc 2f - unmask_interrupts - rcall schedule - mask_interrupts - ld.w r1, r0[TI_flags] - rjmp 1b - -2: mov r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK - tst r1, r2 - breq 3f - unmask_interrupts - mov r12, sp - mov r11, r0 - rcall do_notify_resume - mask_interrupts - ld.w r1, r0[TI_flags] - rjmp 1b - -3: bld r1, TIF_SINGLE_STEP - brcc debug_restore_all - mfdr r2, OCD_DC - sbr r2, OCD_DC_SS_BIT - mtdr OCD_DC, r2 - rjmp debug_restore_all + .size debug_exit_work, . - debug_exit_work .set rsr_int0, SYSREG_RSR_INT0 .set rsr_int1, SYSREG_RSR_INT1 @@ -764,3 +769,53 @@ cpu_idle_enable_int_and_exit: IRQ_LEVEL 1 IRQ_LEVEL 2 IRQ_LEVEL 3 + + .section .kprobes.text, "ax", @progbits + .type enter_monitor_mode, @function +enter_monitor_mode: + /* + * We need to enter monitor mode to do a single step. The + * monitor code will alter the return address so that we + * return directly to the user instead of returning here. + */ + breakpoint + rjmp breakpoint_failed + + .size enter_monitor_mode, . - enter_monitor_mode + + .type debug_trampoline, @function + .global debug_trampoline +debug_trampoline: + /* + * Save the registers on the stack so that the monitor code + * can find them easily. + */ + sub sp, 4 /* r12_orig */ + stmts --sp, r0-lr + get_thread_info r0 + ld.w r8, r0[TI_rar_saved] + ld.w r9, r0[TI_rsr_saved] + pushm r8-r9 + + /* + * The monitor code will alter the return address so we don't + * return here. + */ + breakpoint + rjmp breakpoint_failed + .size debug_trampoline, . - debug_trampoline + + .type breakpoint_failed, @function +breakpoint_failed: + /* + * Something went wrong. Perhaps the debug hardware isn't + * enabled? + */ + lda.w r12, msg_breakpoint_failed + mov r11, sp + mov r10, 9 /* SIGKILL */ + call die +1: rjmp 1b + +msg_breakpoint_failed: + .asciz "Failed to enter Debug Mode" diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c index 0de9a6eeb5b..002369e4409 100644 --- a/arch/avr32/kernel/ptrace.c +++ b/arch/avr32/kernel/ptrace.c @@ -30,20 +30,22 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk) static void ptrace_single_step(struct task_struct *tsk) { - pr_debug("ptrace_single_step: pid=%u, SR=0x%08lx\n", - tsk->pid, tsk->thread.cpu_context.sr); - if (!(tsk->thread.cpu_context.sr & SR_D)) { - /* - * Set a breakpoint at the current pc to force the - * process into debug mode. The syscall/exception - * exit code will set a breakpoint at the return - * address when this flag is set. - */ - pr_debug("ptrace_single_step: Setting TIF_BREAKPOINT\n"); - set_tsk_thread_flag(tsk, TIF_BREAKPOINT); - } + pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n", + tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr); - /* The monitor code will do the actual step for us */ + /* + * We can't schedule in Debug mode, so when TIF_BREAKPOINT is + * set, the system call or exception handler will do a + * breakpoint to enter monitor mode before returning to + * userspace. + * + * The monitor code will then notice that TIF_SINGLE_STEP is + * set and return to userspace with single stepping enabled. + * The CPU will then enter monitor mode again after exactly + * one instruction has been executed, and the monitor code + * will then send a SIGTRAP to the process. + */ + set_tsk_thread_flag(tsk, TIF_BREAKPOINT); set_tsk_thread_flag(tsk, TIF_SINGLE_STEP); } @@ -55,23 +57,7 @@ static void ptrace_single_step(struct task_struct *tsk) void ptrace_disable(struct task_struct *child) { clear_tsk_thread_flag(child, TIF_SINGLE_STEP); -} - -/* - * Handle hitting a breakpoint - */ -static void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) -{ - siginfo_t info; - - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_BRKPT; - info.si_addr = (void __user *)instruction_pointer(regs); - - pr_debug("ptrace_break: Sending SIGTRAP to PID %u (pc = 0x%p)\n", - tsk->pid, info.si_addr); - force_sig_info(SIGTRAP, &info, tsk); + clear_tsk_thread_flag(child, TIF_BREAKPOINT); } /* @@ -84,9 +70,6 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long offset, unsigned long *regs; unsigned long value; - pr_debug("ptrace_read_user(%p, %#lx, %p)\n", - tsk, offset, data); - if (offset & 3 || offset >= sizeof(struct user)) { printk("ptrace_read_user: invalid offset 0x%08lx\n", offset); return -EIO; @@ -98,6 +81,9 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long offset, if (offset < sizeof(struct pt_regs)) value = regs[offset / sizeof(regs[0])]; + pr_debug("ptrace_read_user(%s[%u], %#lx, %p) -> %#lx\n", + tsk->comm, tsk->pid, offset, data, value); + return put_user(value, data); } @@ -111,8 +97,11 @@ static int ptrace_write_user(struct task_struct *tsk, unsigned long offset, { unsigned long *regs; + pr_debug("ptrace_write_user(%s[%u], %#lx, %#lx)\n", + tsk->comm, tsk->pid, offset, value); + if (offset & 3 || offset >= sizeof(struct user)) { - printk("ptrace_write_user: invalid offset 0x%08lx\n", offset); + pr_debug(" invalid offset 0x%08lx\n", offset); return -EIO; } @@ -155,9 +144,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; - pr_debug("arch_ptrace(%ld, %d, %#lx, %#lx)\n", - request, child->pid, addr, data); - pr_debug("ptrace: Enabling monitor mode...\n"); ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT)); @@ -241,20 +227,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - pr_debug("sys_ptrace returning %d (DC = 0x%08lx)\n", - ret, ocd_read(DC)); return ret; } asmlinkage void syscall_trace(void) { - pr_debug("syscall_trace called\n"); if (!test_thread_flag(TIF_SYSCALL_TRACE)) return; if (!(current->ptrace & PT_PTRACED)) return; - pr_debug("syscall_trace: notifying parent\n"); /* The 0x80 provides a way for the tracing parent to * distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) @@ -273,86 +255,143 @@ asmlinkage void syscall_trace(void) } } -asmlinkage void do_debug_priv(struct pt_regs *regs) -{ - unsigned long dc, ds; - unsigned long die_val; - - ds = ocd_read(DS); - - pr_debug("do_debug_priv: pc = %08lx, ds = %08lx\n", regs->pc, ds); - - if (ds & (1 << OCD_DS_SSS_BIT)) - die_val = DIE_SSTEP; - else - die_val = DIE_BREAKPOINT; - - if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP) == NOTIFY_STOP) - return; - - if (likely(ds & (1 << OCD_DS_SSS_BIT))) { - extern void itlb_miss(void); - extern void tlb_miss_common(void); - struct thread_info *ti; - - dc = ocd_read(DC); - dc &= ~(1 << OCD_DC_SS_BIT); - ocd_write(DC, dc); - - ti = current_thread_info(); - set_ti_thread_flag(ti, TIF_BREAKPOINT); - - /* The TLB miss handlers don't check thread flags */ - if ((regs->pc >= (unsigned long)&itlb_miss) - && (regs->pc <= (unsigned long)&tlb_miss_common)) { - ocd_write(BWA2A, sysreg_read(RAR_EX)); - ocd_write(BWC2A, 0x40000001 | (get_asid() << 1)); - } - - /* - * If we're running in supervisor mode, the breakpoint - * will take us where we want directly, no need to - * single step. - */ - if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR) - set_ti_thread_flag(ti, TIF_SINGLE_STEP); - } else { - panic("Unable to handle debug trap at pc = %08lx\n", - regs->pc); - } -} - /* - * Handle breakpoints, single steps and other debuggy things. To keep - * things simple initially, we run with interrupts and exceptions - * disabled all the time. + * debug_trampoline() is an assembly stub which will store all user + * registers on the stack and execute a breakpoint instruction. + * + * If we single-step into an exception handler which runs with + * interrupts disabled the whole time so it doesn't have to check for + * pending work, its return address will be modified so that it ends + * up returning to debug_trampoline. + * + * If the exception handler decides to store the user context and + * enable interrupts after all, it will restore the original return + * address and status register value. Before it returns, it will + * notice that TIF_BREAKPOINT is set and execute a breakpoint + * instruction. */ -asmlinkage void do_debug(struct pt_regs *regs) -{ - unsigned long dc, ds; +extern void debug_trampoline(void); - ds = ocd_read(DS); - pr_debug("do_debug: pc = %08lx, ds = %08lx\n", regs->pc, ds); +asmlinkage struct pt_regs *do_debug(struct pt_regs *regs) +{ + struct thread_info *ti; + unsigned long trampoline_addr; + u32 status; + u32 ctrl; + int code; + + status = ocd_read(DS); + ti = current_thread_info(); + code = TRAP_BRKPT; + + pr_debug("do_debug: status=0x%08x PC=0x%08lx SR=0x%08lx tif=0x%08lx\n", + status, regs->pc, regs->sr, ti->flags); + + if (!user_mode(regs)) { + unsigned long die_val = DIE_BREAKPOINT; + + if (status & (1 << OCD_DS_SSS_BIT)) + die_val = DIE_SSTEP; + + if (notify_die(die_val, "ptrace", regs, 0, 0, SIGTRAP) + == NOTIFY_STOP) + return regs; + + if ((status & (1 << OCD_DS_SWB_BIT)) + && test_and_clear_ti_thread_flag( + ti, TIF_BREAKPOINT)) { + /* + * Explicit breakpoint from trampoline or + * exception/syscall/interrupt handler. + * + * The real saved regs are on the stack right + * after the ones we saved on entry. + */ + regs++; + pr_debug(" -> TIF_BREAKPOINT done, adjusted regs:" + "PC=0x%08lx SR=0x%08lx\n", + regs->pc, regs->sr); + BUG_ON(!user_mode(regs)); + + if (test_thread_flag(TIF_SINGLE_STEP)) { + pr_debug("Going to do single step...\n"); + return regs; + } + + /* + * No TIF_SINGLE_STEP means we're done + * stepping over a syscall. Do the trap now. + */ + code = TRAP_TRACE; + } else if ((status & (1 << OCD_DS_SSS_BIT)) + && test_ti_thread_flag(ti, TIF_SINGLE_STEP)) { + + pr_debug("Stepped into something, " + "setting TIF_BREAKPOINT...\n"); + set_ti_thread_flag(ti, TIF_BREAKPOINT); + + /* + * We stepped into an exception, interrupt or + * syscall handler. Some exception handlers + * don't check for pending work, so we need to + * set up a trampoline just in case. + * + * The exception entry code will undo the + * trampoline stuff if it does a full context + * save (which also means that it'll check for + * pending work later.) + */ + if ((regs->sr & MODE_MASK) == MODE_EXCEPTION) { + trampoline_addr + = (unsigned long)&debug_trampoline; + + pr_debug("Setting up trampoline...\n"); + ti->rar_saved = sysreg_read(RAR_EX); + ti->rsr_saved = sysreg_read(RSR_EX); + sysreg_write(RAR_EX, trampoline_addr); + sysreg_write(RSR_EX, (MODE_EXCEPTION + | SR_EM | SR_GM)); + BUG_ON(ti->rsr_saved & MODE_MASK); + } + + /* + * If we stepped into a system call, we + * shouldn't do a single step after we return + * since the return address is right after the + * "scall" instruction we were told to step + * over. + */ + if ((regs->sr & MODE_MASK) == MODE_SUPERVISOR) { + pr_debug("Supervisor; no single step\n"); + clear_ti_thread_flag(ti, TIF_SINGLE_STEP); + } + + ctrl = ocd_read(DC); + ctrl &= ~(1 << OCD_DC_SS_BIT); + ocd_write(DC, ctrl); + + return regs; + } else { + printk(KERN_ERR "Unexpected OCD_DS value: 0x%08x\n", + status); + printk(KERN_ERR "Thread flags: 0x%08lx\n", ti->flags); + die("Unhandled debug trap in kernel mode", + regs, SIGTRAP); + } + } else if (status & (1 << OCD_DS_SSS_BIT)) { + /* Single step in user mode */ + code = TRAP_TRACE; - if (test_thread_flag(TIF_BREAKPOINT)) { - pr_debug("TIF_BREAKPOINT set\n"); - /* We're taking care of it */ - clear_thread_flag(TIF_BREAKPOINT); - ocd_write(BWC2A, 0); + ctrl = ocd_read(DC); + ctrl &= ~(1 << OCD_DC_SS_BIT); + ocd_write(DC, ctrl); } - if (test_thread_flag(TIF_SINGLE_STEP)) { - pr_debug("TIF_SINGLE_STEP set, ds = 0x%08lx\n", ds); - if (ds & (1 << OCD_DS_SSS_BIT)) { - dc = ocd_read(DC); - dc &= ~(1 << OCD_DC_SS_BIT); - ocd_write(DC, dc); + pr_debug("Sending SIGTRAP: code=%d PC=0x%08lx SR=0x%08lx\n", + code, regs->pc, regs->sr); - clear_thread_flag(TIF_SINGLE_STEP); - ptrace_break(current, regs); - } - } else { - /* regular breakpoint */ - ptrace_break(current, regs); - } + clear_thread_flag(TIF_SINGLE_STEP); + _exception(SIGTRAP, regs, code, instruction_pointer(regs)); + + return regs; } diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index ce9ac965988..11f08e35a2e 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -77,10 +77,10 @@ SECTIONS . = 0x100; *(.scall.text) *(.irq.text) + KPROBES_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT - KPROBES_TEXT *(.fixup) *(.gnu.warning) _etext = .; diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h index 6a64833756a..a52576b25af 100644 --- a/include/asm-avr32/processor.h +++ b/include/asm-avr32/processor.h @@ -139,6 +139,9 @@ extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl); extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp, struct pt_regs *regs, const char *log_lvl); +#define task_pt_regs(p) \ + ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1) + #define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc) #define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp) diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h index 67e7aae89e1..184b574289b 100644 --- a/include/asm-avr32/thread_info.h +++ b/include/asm-avr32/thread_info.h @@ -25,6 +25,11 @@ struct thread_info { unsigned long flags; /* low level flags */ __u32 cpu; __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ + __u32 rar_saved; /* return address... */ + __u32 rsr_saved; /* ...and status register + saved by debug handler + when setting up + trampoline */ struct restart_block restart_block; __u8 supervisor_stack[0]; }; @@ -78,8 +83,8 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_BREAKPOINT 4 /* true if we should break after return */ -#define TIF_SINGLE_STEP 5 /* single step after next break */ +#define TIF_BREAKPOINT 4 /* enter monitor mode on return */ +#define TIF_SINGLE_STEP 5 /* single step in progress */ #define TIF_MEMDIE 6 #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ @@ -89,7 +94,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) -#define _TIF_BREAKPOINT (1 << TIF_BREAKPOINT) #define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP) #define _TIF_MEMDIE (1 << TIF_MEMDIE) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) @@ -108,6 +112,6 @@ static inline struct thread_info *current_thread_info(void) /* work to do on any return to userspace */ #define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE)) /* work to do on return from debug mode */ -#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK | (1 << TIF_SINGLE_STEP)) +#define _TIF_DBGWORK_MASK (_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT)) #endif /* __ASM_AVR32_THREAD_INFO_H */ |