diff options
-rw-r--r-- | drivers/net/tulip/dmfe.c | 62 |
1 files changed, 25 insertions, 37 deletions
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 28a5c51b43a..2e5c99941f3 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -257,9 +257,6 @@ struct dmfe_board_info { u8 wol_mode; /* user WOL settings */ struct timer_list timer; - /* System defined statistic counter */ - struct net_device_stats stats; - /* Driver defined statistic counter */ unsigned long tx_fifo_underrun; unsigned long tx_loss_carrier; @@ -316,7 +313,6 @@ static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control static int dmfe_open(struct DEVICE *); static int dmfe_start_xmit(struct sk_buff *, struct DEVICE *); static int dmfe_stop(struct DEVICE *); -static struct net_device_stats * dmfe_get_stats(struct DEVICE *); static void dmfe_set_filter_mode(struct DEVICE *); static const struct ethtool_ops netdev_ethtool_ops; static u16 read_srom_word(long ,int); @@ -351,6 +347,19 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *); /* DM910X network board routine ---------------------------- */ +static const struct net_device_ops netdev_ops = { + .ndo_open = dmfe_open, + .ndo_stop = dmfe_stop, + .ndo_start_xmit = dmfe_start_xmit, + .ndo_set_multicast_list = dmfe_set_filter_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_dmfe, +#endif +}; + /* * Search DM910X board ,allocate space and register it */ @@ -442,14 +451,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, dev->base_addr = db->ioaddr; dev->irq = pdev->irq; pci_set_drvdata(pdev, dev); - dev->open = &dmfe_open; - dev->hard_start_xmit = &dmfe_start_xmit; - dev->stop = &dmfe_stop; - dev->get_stats = &dmfe_get_stats; - dev->set_multicast_list = &dmfe_set_filter_mode; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = &poll_dmfe; -#endif + dev->netdev_ops = &netdev_ops; dev->ethtool_ops = &netdev_ethtool_ops; netif_carrier_off(dev); spin_lock_init(&db->lock); @@ -867,15 +869,15 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) /* A packet sent completed */ db->tx_packet_cnt--; - db->stats.tx_packets++; + dev->stats.tx_packets++; /* Transmit statistic counter */ if ( tdes0 != 0x7fffffff ) { /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ - db->stats.collisions += (tdes0 >> 3) & 0xf; - db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + dev->stats.collisions += (tdes0 >> 3) & 0xf; + dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; if (tdes0 & TDES0_ERR_MASK) { - db->stats.tx_errors++; + dev->stats.tx_errors++; if (tdes0 & 0x0002) { /* UnderRun */ db->tx_fifo_underrun++; @@ -969,13 +971,13 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) if (rdes0 & 0x8000) { /* This is a error packet */ //printk(DRV_NAME ": rdes0: %lx\n", rdes0); - db->stats.rx_errors++; + dev->stats.rx_errors++; if (rdes0 & 1) - db->stats.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; if (rdes0 & 2) - db->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; if (rdes0 & 0x80) - db->stats.rx_length_errors++; + dev->stats.rx_length_errors++; } if ( !(rdes0 & 0x8000) || @@ -1008,8 +1010,8 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); - db->stats.rx_packets++; - db->stats.rx_bytes += rxlen; + dev->stats.rx_packets++; + dev->stats.rx_bytes += rxlen; } } else { /* Reuse SKB buffer when the packet is error */ @@ -1024,20 +1026,6 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) db->rx_ready_ptr = rxptr; } - -/* - * Get statistics from driver. - */ - -static struct net_device_stats * dmfe_get_stats(struct DEVICE *dev) -{ - struct dmfe_board_info *db = netdev_priv(dev); - - DMFE_DBUG(0, "dmfe_get_stats", 0); - return &db->stats; -} - - /* * Set DM910X multicast address */ @@ -1161,7 +1149,7 @@ static void dmfe_timer(unsigned long data) /* Operating Mode Check */ if ( (db->dm910x_chk_mode & 0x1) && - (db->stats.rx_packets > MAX_CHECK_PACKET) ) + (dev->stats.rx_packets > MAX_CHECK_PACKET) ) db->dm910x_chk_mode = 0x4; /* Dynamic reset DM910X : system error or transmit time-out */ |