diff options
| -rw-r--r-- | arch/sh/boards/Kconfig | 5 | ||||
| -rw-r--r-- | arch/sh/boards/mach-dreamcast/irq.c | 32 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7343/irq.c | 129 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7343/setup.c | 10 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7722/irq.c | 131 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7722/setup.c | 6 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7724/irq.c | 36 | ||||
| -rw-r--r-- | arch/sh/boards/mach-x3proto/gpio.c | 57 | ||||
| -rw-r--r-- | arch/sh/cchips/hd6446x/hd64461.c | 33 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7343.h | 7 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7722.h | 10 | ||||
| -rw-r--r-- | drivers/sh/intc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/sh/intc/dynamic.c | 57 | ||||
| -rw-r--r-- | drivers/sh/intc/virq.c | 4 |
14 files changed, 260 insertions, 259 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 1f56b35d324..7048c03490d 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -44,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 @@ -80,6 +82,8 @@ config SH_7780_SOLUTION_ENGINE config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi @@ -295,6 +299,7 @@ config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 select NO_IOPORT if !PCI + select IRQ_DOMAIN config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index f63d323f411..2789647abeb 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -8,10 +8,11 @@ * This file is part of the LinuxDC project (www.linuxdc.org) * Released under the terms of the GNU GPL v2.0 */ - #include <linux/irq.h> #include <linux/io.h> -#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/export.h> +#include <linux/err.h> #include <mach/sysasic.h> /* @@ -141,26 +142,15 @@ int systemasic_irq_demux(int irq) void systemasic_irq_init(void) { - int i, nid = cpu_to_node(boot_cpu_data); - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) { - unsigned int irq; - - irq = create_irq_nr(i, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for systemasic\n", - __func__, i); - return; - } + int irq_base, i; - if (unlikely(irq != i)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, i); - destroy_irq(irq); - return; - } + irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE, + HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs\n", __func__); + return; + } + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq); - } } diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index fd45ffc4834..7646bf0486c 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -1,86 +1,129 @@ /* - * linux/arch/sh/boards/se/7343/irq.c + * Hitachi UL SolutionEngine 7343 FPGA IRQ Support. * * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2012 Paul Mundt * - * Based on linux/arch/sh/boards/se/7722/irq.c + * Based on linux/arch/sh/boards/se/7343/irq.c * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7343-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <asm/sizes.h> #include <mach-se/mach/se7343.h> -unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; +#define PA_CPLD_BASE_ADDR 0x11400000 +#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */ -static void disable_se7343_irq(struct irq_data *data) -{ - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); -} +static void __iomem *se7343_irq_regs; +struct irq_domain *se7343_irq_domain; -static void enable_se7343_irq(struct irq_data *data) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); -} + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; -static struct irq_chip se7343_irq_chip __read_mostly = { - .name = "SE7343-FPGA", - .irq_mask = disable_se7343_irq, - .irq_unmask = enable_se7343_irq, -}; + chip->irq_mask_ack(data); -static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) + mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG); + + for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit)); + + chip->irq_unmask(data); +} + +static void __init se7343_domain_init(void) { - unsigned short intv = __raw_readw(PA_CPLD_ST); - unsigned int ext_irq = 0; + int i; - intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7343_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7343_irq_domain, i); - generic_handle_irq(se7343_fpga_irq[ext_irq]); + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } } } -/* - * Initialize IRQ setting - */ -void __init init_7343se_IRQ(void) +static void __init se7343_gc_init(void) { - int i, irq; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + irq_base = irq_linear_revmap(se7343_irq_domain, 0); - for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7343_fpga_irq[i] = irq; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; - irq_set_chip_and_handler_name(se7343_fpga_irq[i], - &se7343_irq_chip, - handle_level_irq, - "level"); + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; - irq_set_chip_data(se7343_fpga_irq[i], (void *)i); - } + ct->regs.mask = PA_CPLD_IMSK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } + +/* + * Initialize IRQ setting + */ +void __init init_7343se_IRQ(void) +{ + se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16); + if (unlikely(!se7343_irq_regs)) { + pr_err("Failed to remap CPLD\n"); + return; + } + + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG); + + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + se7343_domain_init(); + se7343_gc_init(); +} diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index d2370af56d7..8ce4f2a202a 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -5,6 +5,7 @@ #include <linux/serial_reg.h> #include <linux/usb/isp116x.h> #include <linux/delay.h> +#include <linux/irqdomain.h> #include <asm/machvec.h> #include <mach-se/mach/se7343.h> #include <asm/heartbeat.h> @@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = { static int __init sh7343se_devices_setup(void) { /* Wire-up dynamic vectors */ - serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA]; - serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB]; - + serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTA); + serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTB); usb_resources[2].start = usb_resources[2].end = - se7343_fpga_irq[SE7343_FPGA_IRQ_USB]; + irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB); return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index aac92f21ebd..f5e2af1bf04 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -1,79 +1,96 @@ /* - * linux/arch/sh/boards/se/7722/irq.c + * Hitachi UL SolutionEngine 7722 FPGA IRQ Support. * * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. + * Copyright (C) 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7722-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/err.h> +#include <asm/sizes.h> #include <mach-se/mach/se7722.h> -unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; +#define IRQ01_BASE_ADDR 0x11800000 +#define IRQ01_MODE_REG 0 +#define IRQ01_STS_REG 4 +#define IRQ01_MASK_REG 8 -static void disable_se7722_irq(struct irq_data *data) -{ - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); -} +static void __iomem *se7722_irq_regs; +struct irq_domain *se7722_irq_domain; -static void enable_se7722_irq(struct irq_data *data) +static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); -} + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; -static struct irq_chip se7722_irq_chip __read_mostly = { - .name = "SE7722-FPGA", - .irq_mask = disable_se7722_irq, - .irq_unmask = enable_se7722_irq, -}; + chip->irq_mask_ack(data); -static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) + mask = ioread16(se7722_irq_regs + IRQ01_STS_REG); + + for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit)); + + chip->irq_unmask(data); +} + +static void __init se7722_domain_init(void) { - unsigned short intv = __raw_readw(IRQ01_STS); - unsigned int ext_irq = 0; + int i; - intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; + se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7722_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7722_irq_domain, i); - generic_handle_irq(se7722_fpga_irq[ext_irq]); + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } } } -/* - * Initialize IRQ setting - */ -void __init init_se7722_IRQ(void) +static void __init se7722_gc_init(void) { - int i, irq; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - __raw_writew(0, IRQ01_MASK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + irq_base = irq_linear_revmap(se7722_irq_domain, 0); - for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7722_fpga_irq[i] = irq; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; - irq_set_chip_and_handler_name(se7722_fpga_irq[i], - &se7722_irq_chip, - handle_level_irq, - "level"); + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; - irq_set_chip_data(se7722_fpga_irq[i], (void *)i); - } + ct->regs.mask = IRQ01_MASK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); @@ -81,3 +98,25 @@ void __init init_se7722_IRQ(void) irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux); irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); } + +/* + * Initialize FPGA IRQs + */ +void __init init_se7722_IRQ(void) +{ + se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16); + if (unlikely(!se7722_irq_regs)) { + printk("Failed to remap IRQ01 regs\n"); + return; + } + + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG); + + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + se7722_domain_init(); + se7722_gc_init(); +} diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 8f7f0550cfd..e04e2bc4698 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -2,6 +2,7 @@ * linux/arch/sh/boards/se/7722/setup.c * * Copyright (C) 2007 Nobuhiro Iwamatsu + * Copyright (C) 2012 Paul Mundt * * Hitachi UL SolutionEngine 7722 Support. * @@ -15,6 +16,7 @@ #include <linux/ata_platform.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/irqdomain.h> #include <linux/smc91x.h> #include <linux/sh_intc.h> #include <mach-se/mach/se7722.h> @@ -143,10 +145,10 @@ static int __init se7722_devices_setup(void) /* Wire-up dynamic vectors */ cf_ide_resources[2].start = cf_ide_resources[2].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0); smc91x_eth_resources[1].start = smc91x_eth_resources[1].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_SMC]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC); return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index c6342ce7768..5d1d3ec9a6c 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -17,8 +17,10 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/export.h> +#include <linux/topology.h> +#include <linux/io.h> +#include <linux/err.h> #include <mach-se/mach/se7724.h> struct fpga_irq { @@ -111,7 +113,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_se7724_IRQ(void) { - int i, nid = cpu_to_node(boot_cpu_data); + int irq_base, i; __raw_writew(0xffff, IRQ0_MR); /* mask all */ __raw_writew(0xffff, IRQ1_MR); /* mask all */ @@ -121,28 +123,16 @@ void __init init_se7724_IRQ(void) __raw_writew(0x0000, IRQ2_SR); /* clear irq */ __raw_writew(0x002a, IRQ_MODE); /* set irq type */ - for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) { - int irq, wanted; - - wanted = SE7724_FPGA_IRQ_BASE + i; - - irq = create_irq_nr(wanted, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for FPGA\n", - __func__, wanted); - return; - } - - if (unlikely(irq != wanted)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, wanted); - destroy_irq(irq); - return; - } + irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE, + SE7724_FPGA_IRQ_NR, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs for FPGA\n", __func__); + return; + } - irq_set_chip_and_handler_name(irq, &se7724_irq_chip, + for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) + irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip, handle_level_irq, "level"); - } irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c index f33b2b57019..3ea65e9b56e 100644 --- a/arch/sh/boards/mach-x3proto/gpio.c +++ b/arch/sh/boards/mach-x3proto/gpio.c @@ -3,7 +3,7 @@ * * Renesas SH-X3 Prototype Baseboard GPIO Support. * - * Copyright (C) 2010 Paul Mundt + * Copyright (C) 2010 - 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/spinlock.h> +#include <linux/irqdomain.h> #include <linux/io.h> #include <mach/ilsel.h> #include <mach/hardware.h> @@ -26,7 +27,7 @@ #define KEYDETR 0xb81c0004 static DEFINE_SPINLOCK(x3proto_gpio_lock); -static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, }; +static struct irq_domain *x3proto_irq_domain; static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) { @@ -49,7 +50,14 @@ static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio) static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) { - return x3proto_gpio_irq_map[gpio]; + int virq; + + if (gpio < chip->ngpio) + virq = irq_create_mapping(x3proto_irq_domain, gpio); + else + virq = -ENXIO; + + return virq; } static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -62,9 +70,8 @@ static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) chip->irq_mask_ack(data); mask = __raw_readw(KEYDETR); - for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS) - generic_handle_irq(x3proto_gpio_to_irq(NULL, pin)); + generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin)); chip->irq_unmask(data); } @@ -78,10 +85,23 @@ struct gpio_chip x3proto_gpio_chip = { .ngpio = NR_BASEBOARD_GPIOS, }; +static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq, + "gpio"); + + return 0; +} + +static struct irq_domain_ops x3proto_gpio_irq_ops = { + .map = x3proto_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + int __init x3proto_gpio_setup(void) { - int ilsel; - int ret, i; + int ilsel, ret; ilsel = ilsel_enable(ILSEL_KEY); if (unlikely(ilsel < 0)) @@ -91,21 +111,10 @@ int __init x3proto_gpio_setup(void) if (unlikely(ret)) goto err_gpio; - for (i = 0; i < NR_BASEBOARD_GPIOS; i++) { - unsigned long flags; - int irq = create_irq(); - - if (unlikely(irq < 0)) { - ret = -EINVAL; - goto err_irq; - } - - spin_lock_irqsave(&x3proto_gpio_lock, flags); - x3proto_gpio_irq_map[i] = irq; - irq_set_chip_and_handler_name(irq, &dummy_irq_chip, - handle_simple_irq, "gpio"); - spin_unlock_irqrestore(&x3proto_gpio_lock, flags); - } + x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS, + &x3proto_gpio_irq_ops, NULL); + if (unlikely(!x3proto_irq_domain)) + goto err_irq; pr_info("registering '%s' support, handling GPIOs %u -> %u, " "bound to IRQ %u\n", @@ -119,10 +128,6 @@ int __init x3proto_gpio_setup(void) return 0; err_irq: - for (; i >= 0; --i) - if (x3proto_gpio_irq_map[i]) - destroy_irq(x3proto_gpio_irq_map[i]); - ret = gpiochip_remove(&x3proto_gpio_chip); if (unlikely(ret)) pr_err("Failed deregistering GPIO\n"); diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c index eb4ea4d44d5..e9735616bdc 100644 --- a/arch/sh/cchips/hd6446x/hd64461.c +++ b/arch/sh/cchips/hd6446x/hd64461.c @@ -73,10 +73,7 @@ static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc) int __init setup_hd64461(void) { - int i, nid = cpu_to_node(boot_cpu_data); - - if (!MACH_HD64461) - return 0; + int irq_base, i; printk(KERN_INFO "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n", @@ -89,28 +86,16 @@ int __init setup_hd64461(void) #endif __raw_writew(0xffff, HD64461_NIMR); - /* IRQ 80 -> 95 belongs to HD64461 */ - for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) { - unsigned int irq; - - irq = create_irq_nr(i, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for HD64461\n", - __func__, i); - return -EBUSY; - } - - if (unlikely(irq != i)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, i); - destroy_irq(irq); - return -EINVAL; - } - - irq_set_chip_and_handler(i, &hd64461_irq_chip, - handle_level_irq); + irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs for HD64461\n", __func__); + return irq_base; } + for (i = 0; i < 16; i++) + irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip, + handle_level_irq); + irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux); irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h index 50b5d575dff..542521c970c 100644 --- a/arch/sh/include/mach-se/mach/se7343.h +++ b/arch/sh/include/mach-se/mach/se7343.h @@ -50,9 +50,6 @@ #define PA_LED 0xb0C00000 /* LED */ #define LED_SHIFT 0 #define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ -#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ -#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ /* Area 5 */ #define PA_EXT5 0x14000000 #define PA_EXT5_SIZE 0x04000000 @@ -135,8 +132,10 @@ #define SE7343_FPGA_IRQ_NR 12 +struct irq_domain; + /* arch/sh/boards/se/7343/irq.c */ -extern unsigned int se7343_fpga_irq[]; +extern struct irq_domain *se7343_irq_domain; void init_7343se_IRQ(void); diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h index 201081ebdbc..637e7ac753f 100644 --- a/arch/sh/include/mach-se/mach/se7722.h +++ b/arch/sh/include/mach-se/mach/se7722.h @@ -81,12 +81,6 @@ #define IRQ0_IRQ evt2irq(0x600) #define IRQ1_IRQ evt2irq(0x620) -#define IRQ01_MODE 0xb1800000 -#define IRQ01_STS 0xb1800004 -#define IRQ01_MASK 0xb1800008 - -/* Bits in IRQ01_* registers */ - #define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ #define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ #define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ @@ -95,8 +89,10 @@ #define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ #define SE7722_FPGA_IRQ_NR 6 +struct irq_domain; + /* arch/sh/boards/se/7722/irq.c */ -extern unsigned int se7722_fpga_irq[]; +extern struct irq_domain *se7722_irq_domain; void init_se7722_IRQ(void); diff --git a/drivers/sh/intc/Makefile b/drivers/sh/intc/Makefile index bb5df868d77..44f006d0947 100644 --- a/drivers/sh/intc/Makefile +++ b/drivers/sh/intc/Makefile @@ -1,4 +1,4 @@ -obj-y := access.o chip.o core.o dynamic.o handle.o virq.o +obj-y := access.o chip.o core.o handle.o virq.o obj-$(CONFIG_INTC_BALANCING) += balancing.o obj-$(CONFIG_INTC_USERIMASK) += userimask.o diff --git a/drivers/sh/intc/dynamic.c b/drivers/sh/intc/dynamic.c deleted file mode 100644 index 14eb01ef5d7..00000000000 --- a/drivers/sh/intc/dynamic.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Dynamic IRQ management - * - * Copyright (C) 2010 Paul Mundt - * - * Modelled after arch/x86/kernel/apic/io_apic.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define pr_fmt(fmt) "intc: " fmt - -#include <linux/irq.h> -#include <linux/bitmap.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include "internals.h" /* only for activate_irq() damage.. */ - -/* - * The IRQ bitmap provides a global map of bound IRQ vectors for a - * given platform. Allocation of IRQs are either static through the CPU - * vector map, or dynamic in the case of board mux vectors or MSI. - * - * As this is a central point for all IRQ controllers on the system, - * each of the available sources are mapped out here. This combined with - * sparseirq makes it quite trivial to keep the vector map tightly packed - * when dynamically creating IRQs, as well as tying in to otherwise - * unused irq_desc positions in the sparse array. - */ - -/* - * Dynamic IRQ allocation and deallocation - */ -unsigned int create_irq_nr(unsigned int irq_want, int node) -{ - int irq = irq_alloc_desc_at(irq_want, node); - if (irq < 0) - return 0; - - activate_irq(irq); - return irq; -} - -int create_irq(void) -{ - int irq = irq_alloc_desc(numa_node_id()); - if (irq >= 0) - activate_irq(irq); - - return irq; -} - -void destroy_irq(unsigned int irq) -{ - irq_free_desc(irq); -} diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c index 93cec21e788..f30ac9354ff 100644 --- a/drivers/sh/intc/virq.c +++ b/drivers/sh/intc/virq.c @@ -219,12 +219,14 @@ restart: if (radix_tree_deref_retry(entry)) goto restart; - irq = create_irq(); + irq = irq_alloc_desc(numa_node_id()); if (unlikely(irq < 0)) { pr_err("no more free IRQs, bailing..\n"); break; } + activate_irq(irq); + pr_info("Setting up a chained VIRQ from %d -> %d\n", irq, entry->pirq); |