diff options
| -rw-r--r-- | arch/arm/mach-omap1/fpga.c (renamed from arch/arm/mach-omap/fpga.c) | 0 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/irq.c (renamed from arch/arm/mach-omap/irq.c) | 17 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/time.c (renamed from arch/arm/mach-omap/time.c) | 32 |
3 files changed, 38 insertions, 11 deletions
diff --git a/arch/arm/mach-omap/fpga.c b/arch/arm/mach-omap1/fpga.c index 7c08f6c2e1d..7c08f6c2e1d 100644 --- a/arch/arm/mach-omap/fpga.c +++ b/arch/arm/mach-omap1/fpga.c diff --git a/arch/arm/mach-omap/irq.c b/arch/arm/mach-omap1/irq.c index f01c99266a8..a11b6d80735 100644 --- a/arch/arm/mach-omap/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -56,6 +56,7 @@ struct omap_irq_bank { unsigned long base_reg; unsigned long trigger_map; + unsigned long wake_enable; }; static unsigned int irq_bank_count = 0; @@ -105,6 +106,19 @@ static void omap_mask_ack_irq(unsigned int irq) omap_ack_irq(irq); } +static int omap_wake_irq(unsigned int irq, unsigned int enable) +{ + int bank = IRQ_BANK(irq); + + if (enable) + irq_banks[bank].wake_enable |= IRQ_BIT(irq); + else + irq_banks[bank].wake_enable &= ~IRQ_BIT(irq); + + return 0; +} + + /* * Allows tuning the IRQ type and priority * @@ -145,7 +159,7 @@ static struct omap_irq_bank omap1510_irq_banks[] = { static struct omap_irq_bank omap1610_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xfffff7ff }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, }; #endif @@ -154,6 +168,7 @@ static struct irqchip omap_irq_chip = { .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, + .wake = omap_wake_irq, }; void __init omap_init_irq(void) diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap1/time.c index dd34e9f4c41..d540539c9bb 100644 --- a/arch/arm/mach-omap/time.c +++ b/arch/arm/mach-omap1/time.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap/time.c + * linux/arch/arm/mach-omap1/time.c * * OMAP Timers * @@ -58,17 +58,9 @@ struct sys_timer omap_timer; * MPU timer * --------------------------------------------------------------------------- */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - /* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c, * converted to use kHz by Kevin Hilman */ /* convert from cycles(64bits) => nanoseconds (64bits) @@ -255,6 +247,13 @@ unsigned long long sched_clock(void) #define OMAP_32K_TIMER_TCR 0x04 #define OMAP_32K_TICKS_PER_HZ (32768 / HZ) +#if (32768 % HZ) != 0 +/* We cannot ignore modulo. + * Potential error can be as high as several percent. + */ +#define OMAP_32K_TICK_MODULO (32768 % HZ) +static unsigned modulo_count = 0; /* Counts 1/HZ units */ +#endif /* * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 @@ -331,6 +330,19 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, now = omap_32k_sync_timer_read(); while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { +#ifdef OMAP_32K_TICK_MODULO + /* Modulo addition may put omap_32k_last_tick ahead of now + * and cause unwanted repetition of the while loop. + */ + if (unlikely(now - omap_32k_last_tick == ~0)) + break; + + modulo_count += OMAP_32K_TICK_MODULO; + if (modulo_count > HZ) { + ++omap_32k_last_tick; + modulo_count -= HZ; + } +#endif omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; timer_tick(regs); } @@ -407,7 +419,7 @@ static __init void omap_init_32k_timer(void) * Timer initialization * --------------------------------------------------------------------------- */ -void __init omap_timer_init(void) +static void __init omap_timer_init(void) { #if defined(CONFIG_OMAP_MPU_TIMER) omap_init_mpu_timer(); |