diff options
| -rw-r--r-- | drivers/hwmon/lm83.c | 104 |
1 files changed, 49 insertions, 55 deletions
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 6a8642fa25f..e59e2d1f080 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2006 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -118,21 +118,34 @@ static const u8 LM83_REG_W_HIGH[] = { * Functions declaration */ -static int lm83_attach_adapter(struct i2c_adapter *adapter); -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind); -static int lm83_detach_client(struct i2c_client *client); +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info); +static int lm83_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm83_remove(struct i2c_client *client); static struct lm83_data *lm83_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm83_id[] = { + { "lm83", lm83 }, + { "lm82", lm82 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm83_id); + static struct i2c_driver lm83_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm83", }, - .attach_adapter = lm83_attach_adapter, - .detach_client = lm83_detach_client, + .probe = lm83_probe, + .remove = lm83_remove, + .id_table = lm83_id, + .detect = lm83_detect, + .address_data = &addr_data, }; /* @@ -140,7 +153,6 @@ static struct i2c_driver lm83_driver = { */ struct lm83_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -278,40 +290,15 @@ static const struct attribute_group lm83_group_opt = { * Real code */ -static int lm83_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm83_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm83_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right after the - * LM83-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm83_driver; - new_client->flags = 0; + return -ENODEV; /* Now we do the detection and identification. A negative kind * means that the driver was loaded with no force parameter @@ -335,8 +322,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41) != 0x00)) { dev_dbg(&adapter->dev, - "LM83 detection failed at 0x%02x.\n", address); - goto exit_free; + "LM83 detection failed at 0x%02x.\n", + new_client->addr); + return -ENODEV; } } @@ -361,7 +349,7 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } @@ -372,15 +360,27 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) name = "lm82"; } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static int lm83_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm83_data *data; + int err; + + data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* * Register sysfs hooks * The LM82 can only monitor one external diode which is @@ -389,9 +389,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group))) - goto exit_detach; + goto exit_free; - if (kind == lm83) { + if (id->driver_data == lm83) { if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group_opt))) goto exit_remove_files; @@ -408,26 +408,20 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm83_group); sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm83_detach_client(struct i2c_client *client) +static int lm83_remove(struct i2c_client *client) { struct lm83_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm83_group); sysfs_remove_group(&client->dev.kobj, &lm83_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } |