diff options
671 files changed, 10135 insertions, 7672 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt new file mode 100644 index 00000000000..aabca4f8340 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -0,0 +1,38 @@ +* Advanced Interrupt Controller (AIC) + +Required properties: +- compatible: Should be "atmel,<chip>-aic" +- interrupt-controller: Identifies the node as an interrupt controller. +- interrupt-parent: For single AIC system, it is an empty property. +- #interrupt-cells: The number of cells to define the interrupts. It sould be 2. + The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + Default flag for internal sources should be set to 4 (active high). +- reg: Should contain AIC registers location and length + +Examples: + /* + * AIC + */ + aic: interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + #interrupt-cells = <2>; + reg = <0xfffff000 0x200>; + }; + + /* + * An interrupt generating device that is wired to an AIC. + */ + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt new file mode 100644 index 00000000000..1aeaf6f2a1b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -0,0 +1,32 @@ +Atmel AT91 device tree bindings. +================================ + +PIT Timer required properties: +- compatible: Should be "atmel,at91sam9260-pit" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for the PIT which is the IRQ line + shared across all System Controller members. + +TC/TCLIB Timer required properties: +- compatible: Should be "atmel,<chip>-pit". + <chip> can be "at91rm9200" or "at91sam9x5" +- reg: Should contain registers location and length +- interrupts: Should contain all interrupts for the TC block + Note that you can specify several interrupt cells if the TC + block has one interrupt per channel. + +Examples: + +One interrupt per TC block: + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + }; + +One interrupt per TC channel in a TC block: + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffdc000 0x100>; + interrupts = <26 4 27 4 28 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 54bdddadf1c..bfbc771a65f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -28,3 +28,25 @@ Required root node properties: i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; + +Generic i.MX boards +------------------- + +No iomux setup is done for these boards, so this must have been configured +by the bootloader for boards to work with the generic bindings. + +i.MX27 generic board +Required root node properties: + - compatible = "fsl,imx27"; + +i.MX51 generic board +Required root node properties: + - compatible = "fsl,imx51"; + +i.MX53 generic board +Required root node properties: + - compatible = "fsl,imx53"; + +i.MX6q generic board +Required root node properties: + - compatible = "fsl,imx6q"; diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl.txt new file mode 100644 index 00000000000..d8de933e9d8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl.txt @@ -0,0 +1,6 @@ +Marvell Platforms Device Tree Bindings +---------------------------------------------------- + +PXA168 Aspenite Board +Required root node properties: + - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/emc.txt new file mode 100644 index 00000000000..09335f8eee0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/emc.txt @@ -0,0 +1,100 @@ +Embedded Memory Controller + +Properties: +- name : Should be emc +- #address-cells : Should be 1 +- #size-cells : Should be 0 +- compatible : Should contain "nvidia,tegra20-emc". +- reg : Offset and length of the register set for the device +- nvidia,use-ram-code : If present, the sub-nodes will be addressed + and chosen using the ramcode board selector. If omitted, only one + set of tables can be present and said tables will be used + irrespective of ram-code configuration. + +Child device nodes describe the memory settings for different configurations and clock rates. + +Example: + + emc@7000f400 { + #address-cells = < 1 >; + #size-cells = < 0 >; + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f4000 0x200>; + } + + +Embedded Memory Controller ram-code table + +If the emc node has the nvidia,use-ram-code property present, then the +next level of nodes below the emc table are used to specify which settings +apply for which ram-code settings. + +If the emc node lacks the nvidia,use-ram-code property, this level is omitted +and the tables are stored directly under the emc node (see below). + +Properties: + +- name : Should be emc-tables +- nvidia,ram-code : the binary representation of the ram-code board strappings + for which this node (and children) are valid. + + + +Embedded Memory Controller configuration table + +This is a table containing the EMC register settings for the various +operating speeds of the memory controller. They are always located as +subnodes of the emc controller node. + +There are two ways of specifying which tables to use: + +* The simplest is if there is just one set of tables in the device tree, + and they will always be used (based on which frequency is used). + This is the preferred method, especially when firmware can fill in + this information based on the specific system information and just + pass it on to the kernel. + +* The slightly more complex one is when more than one memory configuration + might exist on the system. The Tegra20 platform handles this during + early boot by selecting one out of possible 4 memory settings based + on a 2-pin "ram code" bootstrap setting on the board. The values of + these strappings can be read through a register in the SoC, and thus + used to select which tables to use. + +Properties: +- name : Should be emc-table +- compatible : Should contain "nvidia,tegra20-emc-table". +- reg : either an opaque enumerator to tell different tables apart, or + the valid frequency for which the table should be used (in kHz). +- clock-frequency : the clock frequency for the EMC at which this + table should be used (in kHz). +- nvidia,emc-registers : a 46 word array of EMC registers to be programmed + for operation at the 'clock-frequency' setting. + The order and contents of the registers are: + RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT, + WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR, + PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW, + TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE, + ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE, + ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0, + CFG_CLKTRIM_1, CFG_CLKTRIM_2 + + emc-table@166000 { + reg = <166000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 166000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; + + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 333000 >; + nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 >; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt new file mode 100644 index 00000000000..b5846e21cc2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -0,0 +1,19 @@ +NVIDIA Tegra Power Management Controller (PMC) + +Properties: +- name : Should be pmc +- compatible : Should contain "nvidia,tegra<chip>-pmc". +- reg : Offset and length of the register set for the device +- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and then + fed into the ARM GIC. The PMC is not involved in the detection or + handling of this interrupt signal, merely its inversion. + +Example: + +pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + nvidia,invert-interrupt; +}; diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt new file mode 100644 index 00000000000..ec8b50cbb2e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vexpress.txt @@ -0,0 +1,146 @@ +ARM Versatile Express boards family +----------------------------------- + +ARM's Versatile Express platform consists of a motherboard and one +or more daughterboards (tiles). The motherboard provides a set of +peripherals. Processor and RAM "live" on the tiles. + +The motherboard and each core tile should be described by a separate +Device Tree source file, with the tile's description including +the motherboard file using a /include/ directive. As the motherboard +can be initialized in one of two different configurations ("memory +maps"), care must be taken to include the correct one. + +Required properties in the root node: +- compatible value: + compatible = "arm,vexpress,<model>", "arm,vexpress"; + where <model> is the full tile model name (as used in the tile's + Technical Reference Manual), eg.: + - for Coretile Express A5x2 (V2P-CA5s): + compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; + - for Coretile Express A9x4 (V2P-CA9): + compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; + If a tile comes in several variants or can be used in more then one + configuration, the compatible value should be: + compatible = "arm,vexpress,<model>,<variant>", \ + "arm,vexpress,<model>", "arm,vexpress"; + eg: + - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1: + compatible = "arm,vexpress,v2p-ca15,tc1", \ + "arm,vexpress,v2p-ca15", "arm,vexpress"; + - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM: + compatible = "arm,vexpress,v2f-2xv6,ca7x3", \ + "arm,vexpress,v2f-2xv6", "arm,vexpress"; + +Optional properties in the root node: +- tile model name (use name from the tile's Technical Reference + Manual, eg. "V2P-CA5s") + model = "<model>"; +- tile's HBI number (unique ARM's board model ID, visible on the + PCB's silkscreen) in hexadecimal transcription: + arm,hbi = <0xhbi> + eg: + - for Coretile Express A5x2 (V2P-CA5s) HBI-0191: + arm,hbi = <0x191>; + - Coretile Express A9x4 (V2P-CA9) HBI-0225: + arm,hbi = <0x225>; + +Top-level standard "cpus" node is required. It must contain a node +with device_type = "cpu" property for every available core, eg.: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + }; + }; + +The motherboard description file provides a single "motherboard" node +using 2 address cells corresponding to the Static Memory Bus used +between the motherboard and the tile. The first cell defines the Chip +Select (CS) line number, the second cell address offset within the CS. +All interrupt lines between the motherboard and the tile are active +high and are described using single cell. + +Optional properties of the "motherboard" node: +- motherboard's memory map variant: + arm,v2m-memory-map = "<name>"; + where name is one of: + - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also + referred to as "ARM Cortex-A Series memory map": + arm,v2m-memory-map = "rs1"; + When this property is missing, the motherboard is using the original + memory map (also known as the "Legacy memory map", primarily used + with the original CoreTile Express A9x4) with peripherals on CS7. + +Motherboard .dtsi files provide a set of labelled peripherals that +can be used to obtain required phandle in the tile's "aliases" node: +- UARTs, note that the numbers correspond to the physical connectors + on the motherboard's back panel: + v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3 +- I2C controllers: + v2m_i2c_dvi and v2m_i2c_pcie +- SP804 timers: + v2m_timer01 and v2m_timer23 + +Current Linux implementation requires a "arm,v2m_timer" alias +pointing at one of the motherboard's SP804 timers, if it is to be +used as the system timer. This alias should be defined in the +motherboard files. + +The tile description must define "ranges", "interrupt-map-mask" and +"interrupt-map" properties to translate the motherboard's address +and interrupt space into one used by the tile's processor. + +Abbreviated example: + +/dts-v1/; + +/ { + model = "V2P-CA5s"; + arm,hbi = <0x225>; + compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + }; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + motherboard { + /* CS0 is visible at 0x08000000 */ + ranges = <0 0 0x08000000 0x04000000>; + interrupt-map-mask = <0 0 63>; + /* Active high IRQ 0 is connected to GIC's SPI0 */ + interrupt-map = <0 0 0 &gic 0 0 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt new file mode 100644 index 00000000000..90fa7da525b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt @@ -0,0 +1,30 @@ +* NVIDIA Tegra APB DMA controller + +Required properties: +- compatible: Should be "nvidia,<chip>-apbdma" +- reg: Should contain DMA registers location and length. This shuld include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts. + +Examples: + +apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 + 0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04 + 0 148 0x04 + 0 149 0x04 + 0 150 0x04 + 0 151 0x04 >; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt new file mode 100644 index 00000000000..66efc804806 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt @@ -0,0 +1,20 @@ +* Atmel GPIO controller (PIO) + +Required properties: +- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5. +- reg: Should contain GPIO controller registers location and length +- interrupts: Should be the port interrupt shared by all the pins. +- #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- gpio-controller: Marks the device node as a GPIO controller. + +Example: + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + }; + diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt index eb4b530d64e..50b363c5b88 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt @@ -2,7 +2,25 @@ NVIDIA Tegra 2 GPIO controller Required properties: - compatible : "nvidia,tegra20-gpio" +- reg : Physical base address and length of the controller's registers. +- interrupts : The interrupt outputs from the controller. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - gpio-controller : Marks the device node as a GPIO controller. + +Example: + +gpio: gpio@6000d000 { + compatible = "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 >; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt new file mode 100644 index 00000000000..1e34cfe5ebe --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -0,0 +1,23 @@ +* Marvell PXA GPIO controller + +Required properties: +- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all gpio pins, if +- interrupt-name : Should be the name of irq resource. + one number. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be one. It is the pin number. + +Example: + + gpio: gpio@d4019000 { + compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + reg = <0xd4019000 0x1000>; + interrupts = <49>, <17>, <18>; + interrupt-name = "gpio_mux", "gpio0", "gpio1"; + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt new file mode 100644 index 00000000000..071eb3caae9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt @@ -0,0 +1,37 @@ +* I2C + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a + compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. + For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required + as shown in the example below. + +Recommended properties : + + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling + status register of i2c controller instead. + - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. + +Examples: + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + }; + diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt new file mode 100644 index 00000000000..0cda19ad485 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt @@ -0,0 +1,17 @@ +* Marvell Real Time Clock controller + +Required properties: +- compatible: should be "mrvl,sa1100-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: Should be two. The first interrupt number is the rtc alarm + interrupt and the second interrupt number is the rtc hz interrupt. +- interrupt-names: Assign name of irq resource. + +Example: + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5>, <6>; + interrupt-name = "rtc 1Hz", "rtc alarm"; + }; diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt new file mode 100644 index 00000000000..d744340de88 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mrvl-serial.txt @@ -0,0 +1,4 @@ +PXA UART controller + +Required properties: +- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart". diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index a0ffac029a0..1bea46a54b1 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -510,17 +510,3 @@ Why: The pci_scan_bus_parented() interface creates a new root bus. The convert to using pci_scan_root_bus() so they can supply a list of bus resources when the bus is created. Who: Bjorn Helgaas <bhelgaas@google.com> - ----------------------------- - -What: The CAP9 SoC family will be removed -When: 3.4 -Files: arch/arm/mach-at91/at91cap9.c - arch/arm/mach-at91/at91cap9_devices.c - arch/arm/mach-at91/include/mach/at91cap9.h - arch/arm/mach-at91/include/mach/at91cap9_matrix.h - arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - arch/arm/mach-at91/board-cap9adk.c -Why: The code is not actively maintained and platforms are now hard to find. -Who: Nicolas Ferre <nicolas.ferre@atmel.com> - Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> diff --git a/MAINTAINERS b/MAINTAINERS index 57dd0f56cd3..f096b0d8e97 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -269,7 +269,6 @@ S: Orphan F: drivers/platform/x86/wmi.c AD1889 ALSA SOUND DRIVER -M: Kyle McMartin <kyle@mcmartin.ca> M: Thibaut Varene <T-Bone@parisc-linux.org> W: http://wiki.parisc-linux.org/AD1889 L: linux-parisc@vger.kernel.org @@ -3047,7 +3046,6 @@ F: drivers/hwspinlock/hwspinlock_* F: include/linux/hwspinlock.h HARMONY SOUND DRIVER -M: Kyle McMartin <kyle@mcmartin.ca> L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* @@ -3791,7 +3789,7 @@ F: Documentation/kdump/ KERNEL AUTOMOUNTER v4 (AUTOFS4) M: Ian Kent <raven@themaw.net> -L: autofs@linux.kernel.org +L: autofs@vger.kernel.org S: Maintained F: fs/autofs4/ @@ -4696,7 +4694,7 @@ NTFS FILESYSTEM M: Anton Altaparmakov <anton@tuxera.com> L: linux-ntfs-dev@lists.sourceforge.net W: http://www.tuxera.com/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git S: Supported F: Documentation/filesystems/ntfs.txt F: fs/ntfs/ @@ -5009,9 +5007,8 @@ F: Documentation/blockdev/paride.txt F: drivers/block/paride/ PARISC ARCHITECTURE -M: Kyle McMartin <kyle@mcmartin.ca> -M: Helge Deller <deller@gmx.de> M: "James E.J. Bottomley" <jejb@parisc-linux.org> +M: Helge Deller <deller@gmx.de> L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ @@ -5870,7 +5867,7 @@ S: Maintained F: drivers/mmc/host/sdhci-spear.c SECURITY SUBSYSTEM -M: James Morris <jmorris@namei.org> +M: James Morris <james.l.morris@oracle.com> L: linux-security-module@vger.kernel.org (suggested Cc:) T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git W: http://security.wiki.kernel.org/ @@ -5883,7 +5880,7 @@ S: Supported SELINUX SECURITY MODULE M: Stephen Smalley <sds@tycho.nsa.gov> -M: James Morris <jmorris@namei.org> +M: James Morris <james.l.morris@oracle.com> M: Eric Paris <eparis@parisplace.org> L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://selinuxproject.org @@ -7283,7 +7280,7 @@ WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck <wim@iguana.be> L: linux-watchdog@vger.kernel.org W: http://www.linux-watchdog.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git +T: git git://www.linux-watchdog.org/linux-watchdog.git S: Maintained F: Documentation/watchdog/ F: drivers/watchdog/ @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a48aecc17ea..cabd8f556a1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -322,9 +322,10 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP + select IRQ_DOMAIN help This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 and AT91CAP9 processors. + AT91SAM9 processors. config ARCH_BCMRING bool "Broadcom BCMRING" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e0d236d7ff7..b895a2a92da 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -81,47 +81,14 @@ choice prompt "Kernel low-level debugging port" depends on DEBUG_LL - config DEBUG_LL_UART_NONE - bool "No low-level debugging UART" - help - Say Y here if your platform doesn't provide a UART option - below. This relies on your platform choosing the right UART - definition internally in order for low-level debugging to - work. - - config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - help - Say Y here if you want the debug print routines to direct - their output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - Note that the system will appear to hang during boot if there - is nothing connected to read from the DCC. - config AT91_DEBUG_LL_DBGU0 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" depends on HAVE_AT91_DBGU0 config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and cap9" + bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 - config DEBUG_FOOTBRIDGE_COM1 - bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the 8250 at PCI COM1. - - config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct - their output to the serial port in the DC21285 (Footbridge). - config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -136,6 +103,20 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -206,38 +187,42 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q. - config DEBUG_S3C_UART0 - depends on PLAT_SAMSUNG - bool "Use S3C UART 0 for low-level debug" + config DEBUG_MSM_UART1 + bool "Kernel low-level debugging messages via MSM UART1" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 0. The port must have been initialised - by the boot-loader before use. - - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + their output to the first serial port on MSM devices. - config DEBUG_S3C_UART1 - depends on PLAT_SAMSUNG - bool "Use S3C UART 1 for low-level debug" + config DEBUG_MSM_UART2 + bool "Kernel low-level debugging messages via MSM UART2" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 help Say Y here if you want the debug print routines to direct - their output to UART 1. The port must have been initialised - by the boot-loader before use. + their output to the second serial port on MSM devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM_UART3 + bool "Kernel low-level debugging messages via MSM UART3" + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on MSM devices. - config DEBUG_S3C_UART2 - depends on PLAT_SAMSUNG - bool "Use S3C UART 2 for low-level debug" + config DEBUG_MSM8660_UART + bool "Kernel low-level debugging messages via MSM 8660 UART" + depends on ARCH_MSM8X60 + select MSM_HAS_DEBUG_UART_HS help Say Y here if you want the debug print routines to direct - their output to UART 2. The port must have been initialised - by the boot-loader before use. + their output to the serial port on MSM 8660 devices. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_MSM8960_UART + bool "Kernel low-level debugging messages via MSM 8960 UART" + depends on ARCH_MSM8960 + select MSM_HAS_DEBUG_UART_HS + help + Say Y here if you want the debug print routines to direct + their output to the serial port on MSM 8960 devices. config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" @@ -255,42 +240,57 @@ choice their output to the standard serial port on the RealView PB1176 platform. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_S3C_UART0 + depends on PLAT_SAMSUNG + bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to UART 0. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART1 + depends on PLAT_SAMSUNG + bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + their output to UART 1. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_S3C_UART2 + depends on PLAT_SAMSUNG + bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + their output to UART 2. The port must have been initialised + by the boot-loader before use. - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS + The uncompressor code port configuration is now handled + by CONFIG_S3C_LOWLEVEL_UART_PORT. + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. endchoice diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 07603b8c950..a100db03ec9 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -23,6 +23,11 @@ serial4 = &usart3; serial5 = &usart4; serial6 = &usart5; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + tcb0 = &tcb0; + tcb1 = &tcb1; }; cpus { cpu@0 { @@ -47,24 +52,69 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <1>; + #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; interrupt-parent; reg = <0xfffff000 0x200>; }; + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 18 4 19 4>; + }; + + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffdc000 0x100>; + interrupts = <26 4 27 4 28 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1>; + interrupts = <1 4>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6>; + interrupts = <6 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -73,7 +123,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7>; + interrupts = <7 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -82,7 +132,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8>; + interrupts = <8 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -91,7 +141,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23>; + interrupts = <23 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -100,7 +150,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24>; + interrupts = <24 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -109,7 +159,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25>; + interrupts = <25 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -118,7 +168,7 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21>; + interrupts = <21 4>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts new file mode 100644 index 00000000000..e64eb932083 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -0,0 +1,37 @@ +/* + * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x5.dtsi" +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fffa005300a..f779667159b 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -22,6 +22,13 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + gpio4 = &pioE; + tcb0 = &tcb0; + tcb1 = &tcb1; }; cpus { cpu@0 { @@ -46,30 +53,94 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <1>; + #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; interrupt-parent; reg = <0xfffff000 0x200>; }; + pit: timer@fffffd30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffd30 0xf>; + interrupts = <1 4>; + }; + + + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + }; + + tcb1: timer@fffd4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffd4000 0x100>; + interrupts = <18 4>; + }; + dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21>; + interrupts = <21 4>; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <4 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <5 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <5 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1>; + interrupts = <1 4>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7>; + interrupts = <7 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -78,7 +149,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8>; + interrupts = <8 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -87,7 +158,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9>; + interrupts = <9 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -96,7 +167,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10>; + interrupts = <10 4>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -105,7 +176,7 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25>; + interrupts = <25 4>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a387e7704ce..15e25f903ca 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -37,4 +37,76 @@ }; }; }; + + leds { + compatible = "gpio-leds"; + + d8 { + label = "d8"; + gpios = <&pioD 30 0>; + linux,default-trigger = "heartbeat"; + }; + + d6 { + label = "d6"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + d7 { + label = "d7"; + gpios = <&pioD 31 1>; + linux,default-trigger = "mmc0"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + left_click { + label = "left_click"; + gpios = <&pioB 6 1>; + linux,code = <272>; + gpio-key,wakeup; + }; + + right_click { + label = "right_click"; + gpios = <&pioB 7 1>; + linux,code = <273>; + gpio-key,wakeup; + }; + + left { + label = "Joystick Left"; + gpios = <&pioB 14 1>; + linux,code = <105>; + }; + + right { + label = "Joystick Right"; + gpios = <&pioB 15 1>; + linux,code = <106>; + }; + + up { + label = "Joystick Up"; + gpios = <&pioB 16 1>; + linux,code = <103>; + }; + + down { + label = "Joystick Down"; + gpios = <&pioB 17 1>; + linux,code = <108>; + }; + + enter { + label = "Joystick Press"; + gpios = <&pioB 18 1>; + linux,code = <28>; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi new file mode 100644 index 00000000000..a02e636d8a5 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -0,0 +1,176 @@ +/* + * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC + * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, + * AT91SAM9X25, AT91SAM9X35 SoC + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91SAM9x5 family SoC"; + compatible = "atmel,at91sam9x5"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory@20000000 { + reg = <0x20000000 0x10000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <2>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + interrupt-parent; + reg = <0xfffff000 0x200>; + }; + + pit: timer@fffffe30 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe30 0xf>; + interrupts = <1 4>; + }; + + tcb0: timer@f8008000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8008000 0x100>; + interrupts = <17 4>; + }; + + tcb1: timer@f800c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf800c000 0x100>; + interrupts = <17 4>; + }; + + dma0: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <20 4>; + }; + + dma1: dma-controller@ffffee00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffee00 0x200>; + interrupts = <21 4>; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x100>; + interrupts = <2 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x100>; + interrupts = <3 4>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4>; + status = "disabled"; + }; + + usart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x200>; + interrupts = <5 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart1: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x200>; + interrupts = <6 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + usart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x200>; + interrupts = <7 4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <24 4>; + status = "disabled"; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf8030000 0x100>; + interrupts = <27 4>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi new file mode 100644 index 00000000000..64ae3e89025 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -0,0 +1,29 @@ +/* + * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + memory@20000000 { + reg = <0x20000000 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + pb18 { + label = "pb18"; + gpios = <&pioB 18 1>; + linux,default-trigger = "heartbeat"; + }; + + pd21 { + label = "pd21"; + gpios = <&pioD 21 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts new file mode 100644 index 00000000000..a51a08fc2af --- /dev/null +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -0,0 +1,76 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "Phytec pcm038"; + compatible = "phytec,imx27-pcm038", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + uart@1000b000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + uart@1000c000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + + i2c@1001d000 { + clock-frequency = <400000>; + status = "okay"; + at24@4c { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + lm75@4a { + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + }; + }; + + nor_flash@c0000000 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0xc0000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi new file mode 100644 index 00000000000..bc5e7d5ddd5 --- /dev/null +++ b/arch/arm/boot/dts/imx27.dtsi @@ -0,0 +1,217 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + avic: avic-interrupt-controller@e0000000 { + compatible = "fsl,imx27-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10040000 0x1000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + clock-frequency = <26000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aipi@10000000 { /* AIPI1 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x10000000>; + ranges; + + wdog@10002000 { + compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; + reg = <0x10002000 0x4000>; + interrupts = <27>; + status = "disabled"; + }; + + uart1: uart@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + uart2: uart@1000b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000b000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + uart3: uart@1000c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000c000 0x1000>; + interrupts = <18>; + status = "disabled"; + }; + + uart4: uart@1000d000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000d000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + cspi1: cspi@1000e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000e000 0x1000>; + interrupts = <16>; + status = "disabled"; + }; + + cspi2: cspi@1000f000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000f000 0x1000>; + interrupts = <15>; + status = "disabled"; + }; + + i2c1: i2c@10012000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + reg = <0x10012000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + + gpio1: gpio@10015000 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015000 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@10015100 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015100 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@10015200 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015200 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@10015300 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015300 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@10015400 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015400 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@10015500 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015500 0x100>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + cspi3: cspi@10017000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x10017000 0x1000>; + interrupts = <6>; + status = "disabled"; + }; + + uart5: uart@1001b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001b000 0x1000>; + interrupts = <49>; + status = "disabled"; + }; + + uart6: uart@1001c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001c000 0x1000>; + interrupts = <48>; + status = "disabled"; + }; + + i2c2: i2c@1001d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + reg = <0x1001d000 0x1000>; + interrupts = <1>; + status = "disabled"; + }; + + fec: fec@1002b000 { + compatible = "fsl,imx27-fec"; + reg = <0x1002b000 0x4000>; + interrupts = <50>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 564cb8c19f1..9949e6060de 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -56,8 +56,95 @@ compatible = "fsl,mc13892"; spi-max-frequency = <6000000>; reg = <0>; - mc13xxx-irq-gpios = <&gpio1 8 0>; - fsl,mc13xxx-uses-regulator; + interrupt-parent = <&gpio1>; + interrupts = <8>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; }; flash: at45db321d@1 { diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index c3977e0478b..ce1c8238c89 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -36,11 +36,13 @@ usdhc@02198000 { /* uSDHC3 */ cd-gpios = <&gpio6 11 0>; wp-gpios = <&gpio6 14 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ fsl,card-wired; + vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -50,6 +52,18 @@ }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 08d920de728..4663a4e5a28 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -32,18 +32,52 @@ usdhc@02198000 { /* uSDHC3 */ cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; + vmmc-supply = <®_3p3v>; status = "okay"; }; uart2: uart@021e8000 { status = "okay"; }; + + i2c@021a0000 { /* I2C1 */ + status = "okay"; + clock-frequency = <100000>; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts new file mode 100644 index 00000000000..e762facb3fa --- /dev/null +++ b/arch/arm/boot/dts/pxa168-aspenite.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "pxa168.dtsi" + +/ { + model = "Marvell PXA168 Aspenite Development Board"; + compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; + }; + + memory { + reg = <0x00000000 0x04000000>; + }; + + soc { + apb@d4000000 { + uart1: uart@d4017000 { + status = "okay"; + }; + twsi1: i2c@d4011000 { + status = "okay"; + }; + rtc: rtc@d4010000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi new file mode 100644 index 00000000000..d32d5128f22 --- /dev/null +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + i2c0 = &twsi1; + i2c1 = &twsi2; + }; + + intc: intc-interrupt-controller@d4282000 { + compatible = "mrvl,mmp-intc", "mrvl,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + apb@d4000000 { /* APB */ + compatible = "mrvl,apb-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + uart1: uart@d4017000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + uart2: uart@d4018000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <28>; + status = "disabled"; + }; + + uart3: uart@d4026000 { + compatible = "mrvl,mmp-uart", "mrvl,pxa-uart"; + reg = <0xd4026000 0x1000>; + interrupts = <29>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + reg = <0xd4019000 0x1000>; + interrupts = <49>; + interrupt-names = "gpio_mux"; + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4025000 { + compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c"; + reg = <0xd4025000 0x1000>; + interrupts = <58>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <5 6>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 70c41fc897d..73263501f58 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -33,4 +33,22 @@ i2c@7000d000 { clock-frequency = <100000>; }; + + sdhci@78000000 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + }; + + sdhci@78000200 { + status = "disable"; + }; + + sdhci@78000400 { + status = "disable"; + }; + + sdhci@78000400 { + support-8bit; + }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 80afa1b70b8..6e8447dc020 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -10,19 +10,25 @@ reg = < 0x00000000 0x40000000 >; }; + pmc@7000f400 { + nvidia,invert-interrupt; + }; + i2c@7000c000 { clock-frequency = <400000>; - codec: wm8903@1a { + wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; - interrupts = < 347 >; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; gpio-controller; #gpio-cells = <2>; - /* 0x8000 = Not configured */ - gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >; + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; }; }; @@ -38,13 +44,32 @@ clock-frequency = <400000>; }; - sound { - compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903"; + i2s@70002a00 { + status = "disable"; + }; - spkr-en-gpios = <&codec 2 0>; - hp-det-gpios = <&gpio 178 0>; - int-mic-en-gpios = <&gpio 184 0>; - ext-mic-en-gpios = <&gpio 185 0>; + sound { + compatible = "nvidia,tegra-audio-wm8903-harmony", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Harmony"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; serial@70006000 { diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 825d2957da0..3c1ff5a43fb 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -12,6 +12,13 @@ i2c@7000c000 { clock-frequency = <400000>; + + alc5632: alc5632@1e { + compatible = "realtek,alc5632"; + reg = <0x1e>; + gpio-controller; + #gpio-cells = <2>; + }; }; i2c@7000c400 { @@ -37,6 +44,30 @@ clock-frequency = <400000>; }; + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-alc5632-paz00", + "nvidia,tegra-audio-alc5632"; + + nvidia,model = "Compal PAZ00"; + + nvidia,audio-routing = + "Int Spk", "SPKOUT", + "Int Spk", "SPKOUTN", + "Headset Mic", "MICBIAS1", + "MIC1", "Headset Mic", + "Headset Stereophone", "HPR", + "Headset Stereophone", "HPL", + "DMICDAT", "Digital Mic"; + + nvidia,audio-codec = <&alc5632>; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; + serial@70006000 { clock-frequency = <216000000>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index b55a02e34ba..876d5c92ce3 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -13,6 +13,20 @@ i2c@7000c000 { clock-frequency = <400000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + }; }; i2c@7000c400 { @@ -32,6 +46,32 @@ }; }; + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-seaboard", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Seaboard"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1R", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + }; + serial@70006000 { status = "disable"; }; @@ -93,4 +133,42 @@ gpio-key,wakeup; }; }; + + emc@7000f400 { + emc-table@190000 { + reg = < 190000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 190000 >; + nvidia,emc-registers = < 0x0000000c 0x00000026 + 0x00000009 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x0000059f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000b 0x000000c8 + 0x00000003 0x00000007 0x00000004 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xa06204ae + 0x007dc010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + + emc-table@380000 { + reg = < 380000 >; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = < 380000 >; + nvidia,emc-registers = < 0x00000017 0x0000004b + 0x00000012 0x00000006 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000b5f + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe044048b + 0x007d8010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 >; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index 3b3ee7db99f..252476867b5 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -26,6 +26,18 @@ status = "disable"; }; + i2s@70002800 { + status = "disable"; + }; + + i2s@70002a00 { + status = "disable"; + }; + + das@70000c00 { + status = "disable"; + }; + serial@70006000 { clock-frequency = < 216000000 >; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index c7d3b87f29d..2dcff8728e9 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -12,6 +12,20 @@ i2c@7000c000 { clock-frequency = <400000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = < 187 0x04 >; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + }; }; i2c@7000c400 { @@ -26,6 +40,34 @@ clock-frequency = <400000>; }; + i2s@70002a00 { + status = "disable"; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-ventana", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Ventana"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + }; + serial@70006000 { status = "disable"; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 3da7afd4532..d2bc7e7ad06 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -12,6 +17,33 @@ < 0x50040100 0x0100 >; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 56 0x04 + 0 57 0x04>; + }; + + apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -44,18 +76,18 @@ interrupts = < 0 53 0x04 >; }; - i2s@70002800 { + tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = < 0 13 0x04 >; - dma-channel = < 2 >; + nvidia,dma-request-selector = < &apbdma 2 >; }; - i2s@70002a00 { + tegra_i2s2: i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; interrupts = < 0 3 0x04 >; - dma-channel = < 1 >; + nvidia,dma-request-selector = < &apbdma 1 >; }; das@70000c00 { @@ -120,6 +152,13 @@ interrupts = < 0 91 0x04 >; }; + emc@7000f400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x200>; + }; + sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index ee7db9892e0..e957051f864 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,11 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + pmc@7000f400 { + compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -12,6 +17,51 @@ < 0x50040100 0x0100 >; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04>; + }; + + apbdma: dma@6000a000 { + compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = < 0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 >; + }; + i2c@7000c000 { #address-cells = <1>; #size-cells = <0>; @@ -55,7 +105,14 @@ gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >; + interrupts = < 0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04 >; #gpio-cells = <2>; gpio-controller; }; diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts index f04b535477f..d74545a2a77 100644 --- a/arch/arm/boot/dts/usb_a9g20.dts +++ b/arch/arm/boot/dts/usb_a9g20.dts @@ -32,4 +32,27 @@ }; }; }; + + leds { + compatible = "gpio-leds"; + + user_led { + label = "user_led"; + gpios = <&pioB 21 1>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user_pb { + label = "user_pb"; + gpios = <&pioB 10 1>; + linux,code = <28>; + gpio-key,wakeup; + }; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi new file mode 100644 index 00000000000..16076e2d093 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -0,0 +1,201 @@ +/* + * ARM Ltd. Versatile Express + * + * Motherboard Express uATX + * V2M-P1 + * + * HBI-0190D + * + * RS1 memory map ("ARM Cortex-A Series memory map" in the board's + * Technical Reference Manual) + * + * WARNING! The hardware described in this file is independent from the + * original variant (vexpress-v2m.dtsi), but there is a strong + * correspondence between the two configurations. + * + * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT + * CHANGES TO vexpress-v2m.dtsi! + */ + +/ { + aliases { + arm,v2m_timer = &v2m_timer01; + }; + + motherboard { + compatible = "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + psram@1,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <1 0x00000000 0x02000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + + usb@2,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <2 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + }; + + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@030000 { + compatible = "arm,versatile-i2c"; + reg = <0x030000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + }; + + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@160000 { + compatible = "arm,versatile-i2c"; + reg = <0x160000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; + + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + }; + + compact-flash@1a0000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a0000 0x100 + 0x1a0100 0xf00>; + reg-shift = <2>; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi new file mode 100644 index 00000000000..a6c9c7c82d5 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -0,0 +1,200 @@ +/* + * ARM Ltd. Versatile Express + * + * Motherboard Express uATX + * V2M-P1 + * + * HBI-0190D + * + * Original memory map ("Legacy memory map" in the board's + * Technical Reference Manual) + * + * WARNING! The hardware described in this file is independent from the + * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong + * correspondence between the two configurations. + * + * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT + * CHANGES TO vexpress-v2m-rs1.dtsi! + */ + +/ { + aliases { + arm,v2m_timer = &v2m_timer01; + }; + + motherboard { + compatible = "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <1 0x00000000 0x04000000>; + bank-width = <4>; + }; + + psram@2,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <2 0x00000000 0x02000000>; + bank-width = <4>; + }; + + vram@3,00000000 { + compatible = "arm,vexpress-vram"; + reg = <3 0x00000000 0x00800000>; + }; + + ethernet@3,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <3 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + + usb@3,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <3 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; + + iofpga@7,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 7 0 0x20000>; + + sysreg@00000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x00000 0x1000>; + }; + + sysctl@01000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x01000 0x1000>; + }; + + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@02000 { + compatible = "arm,versatile-i2c"; + reg = <0x02000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; + + aaci@04000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x04000 0x1000>; + interrupts = <11>; + }; + + mmci@05000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x05000 0x1000>; + interrupts = <9 10>; + }; + + kmi@06000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x06000 0x1000>; + interrupts = <12>; + }; + + kmi@07000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x07000 0x1000>; + interrupts = <13>; + }; + + v2m_serial0: uart@09000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x09000 0x1000>; + interrupts = <5>; + }; + + v2m_serial1: uart@0a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a000 0x1000>; + interrupts = <6>; + }; + + v2m_serial2: uart@0b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b000 0x1000>; + interrupts = <7>; + }; + + v2m_serial3: uart@0c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c000 0x1000>; + interrupts = <8>; + }; + + wdt@0f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f000 0x1000>; + interrupts = <0>; + }; + + v2m_timer01: timer@11000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x11000 0x1000>; + interrupts = <2>; + }; + + v2m_timer23: timer@12000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x12000 0x1000>; + }; + + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@16000 { + compatible = "arm,versatile-i2c"; + reg = <0x16000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; + + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; + }; + + rtc@17000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x17000 0x1000>; + interrupts = <4>; + }; + + compact-flash@1a000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a000 0x100 + 0x1a100 0xf00>; + reg-shift = <2>; + }; + + clcd@1f000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f000 0x1000>; + interrupts = <14>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts new file mode 100644 index 00000000000..941b161ab78 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -0,0 +1,157 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 (version with Test Chip 1) + * Cortex-A15 MPCore (V2P-CA15) + * + * HBI-0237A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15"; + arm,hbi = <0x237>; + compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x2b0a0000 0x1000>; + }; + + wdt@2b060000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x2b060000 0x1000>; + interrupts = <98>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x100>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x7ffd0000 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ffb0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x7ffb0000 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts new file mode 100644 index 00000000000..6905e66d474 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -0,0 +1,162 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A5x2 + * Cortex-A5 MPCore (V2P-CA5s) + * + * HBI-0225B + */ + +/dts-v1/; + +/ { + model = "V2P-CA5s"; + arm,hbi = <0x225>; + compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + hdlcd@2a110000 { + compatible = "arm,hdlcd"; + reg = <0x2a110000 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2a150000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x2a150000 0x1000>; + }; + + memory-controller@2a190000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x2a190000 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a5-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x2c000600 0x38>; + interrupts = <1 2 0x304>, + <1 3 0x304>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + L2: cache-controller@2c0f0000 { + compatible = "arm,pl310-cache"; + reg = <0x2c0f0000 0x1000>; + interrupts = <0 84 4>; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts new file mode 100644 index 00000000000..da778693be5 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -0,0 +1,192 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A9x4 + * Cortex-A9 MPCore (V2P-CA9) + * + * HBI-0191B + */ + +/dts-v1/; + +/ { + model = "V2P-CA9"; + arm,hbi = <0x191>; + compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupts = <0 44 4>; + }; + + memory-controller@100e0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0x100e0000 0x1000>; + }; + + memory-controller@100e1000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0x100e1000 0x1000>; + interrupts = <0 45 4>, + <0 46 4>; + }; + + timer@100e4000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x100e4000 0x1000>; + interrupts = <0 48 4>, + <0 49 4>; + }; + + watchdog@100e5000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x100e5000 0x1000>; + interrupts = <0 51 4>; + }; + + scu@1e000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1e000000 0x58>; + }; + + timer@1e000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1e000600 0x20>; + interrupts = <1 2 0xf04>, + <1 3 0xf04>; + }; + + gic: interrupt-controller@1e001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000100 0x100>; + }; + + L2: cache-controller@1e00a000 { + compatible = "arm,pl310-cache"; + reg = <0x1e00a000 0x1000>; + interrupts = <0 43 4>; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + motherboard { + ranges = <0 0 0x40000000 0x04000000>, + <1 0 0x44000000 0x04000000>, + <2 0 0x48000000 0x04000000>, + <3 0 0x4c000000 0x04000000>, + <7 0 0x10000000 0x00020000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m.dtsi" diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index d1bcd7b13eb..fb1f1cfce60 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -320,13 +320,6 @@ err0: return -EBUSY; } -/* - * If we set up a device for bus mastering, we need to check the latency - * timer as we don't have even crappy BIOSes to set it properly. - * The implementation is from arch/i386/pci/i386.c - */ -unsigned int pcibios_max_latency = 255; - /* ITE bridge requires setting latency timer to avoid early bus access termination by PCI bus master devices */ diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index d8e44a43047..ff3ad224482 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; - int ret = 0, active = thrd->req_running; + int ret = 0, active; if (!thrd || thrd->free || thrd->dmac->state == DYING) return -EINVAL; pl330 = thrd->dmac; + active = thrd->req_running; spin_lock_irqsave(&pl330->lock, flags); diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig deleted file mode 100644 index 8826eb218e7..00000000000 --- a/arch/arm/configs/at91cap9_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91CAP9=y -CONFIG_MACH_AT91CAP9ADK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 62f8095d46d..23371b17b23 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -137,6 +137,11 @@ disable_irq .endm + .macro save_and_disable_irqs_notrace, oldcpsr + mrs \oldcpsr, cpsr + disable_irq_notrace + .endm + /* * Restore interrupt state previously stored in a register. We don't * guarantee that this will preserve the flags. diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index c0f4e7bf22d..d6030ff599d 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -9,7 +9,12 @@ * * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview * can have 16-bit or 32-bit selectable via a bit in the control register. + * + * Every SP804 contains two identical timers. */ +#define TIMER_1_BASE 0x00 +#define TIMER_2_BASE 0x20 + #define TIMER_LOAD 0x00 /* ACVR rw */ #define TIMER_VALUE 0x04 /* ACVR ro */ #define TIMER_CTRL 0x08 /* ACVR rw */ diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h index 575fa8186ca..c1821385abf 100644 --- a/arch/arm/include/asm/hardware/pl330.h +++ b/arch/arm/include/asm/hardware/pl330.h @@ -41,7 +41,7 @@ enum pl330_dstcachectrl { DCCTRL1, /* Bufferable only */ DCCTRL2, /* Cacheable, but do not allocate */ DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, + DINVALID1, /* AWCACHE = 0x1000 */ DINVALID2, DCCTRL6, /* Cacheable write-through, allocate on writes only */ DCCTRL7, /* Cacheable write-back, allocate on writes only */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index ce280b8d613..cb8d638924f 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -22,6 +22,7 @@ #include <asm/hw_breakpoint.h> #include <asm/ptrace.h> #include <asm/types.h> +#include <asm/system.h> #ifdef __KERNEL__ #define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index e4c96cc6ec0..424aa458c48 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -110,6 +110,7 @@ extern void cpu_init(void); void soft_restart(unsigned long); extern void (*arm_pm_restart)(char str, const char *cmd); +extern void (*arm_pm_idle)(void); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 971d65c253a..008e7ce766a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void); static volatile int hlt_counter; -#include <mach/system.h> - void disable_hlt(void) { hlt_counter++; @@ -181,13 +179,17 @@ void cpu_idle_wait(void) EXPORT_SYMBOL_GPL(cpu_idle_wait); /* - * This is our default idle handler. We need to disable - * interrupts here to ensure we don't miss a wakeup call. + * This is our default idle handler. */ + +void (*arm_pm_idle)(void); + static void default_idle(void) { - if (!need_resched()) - arch_idle(); + if (arm_pm_idle) + arm_pm_idle(); + else + cpu_do_idle(); local_irq_enable(); } @@ -215,6 +217,10 @@ void cpu_idle(void) cpu_die(); #endif + /* + * We need to disable interrupts here + * to ensure we don't miss a wakeup call. + */ local_irq_disable(); #ifdef CONFIG_PL310_ERRATA_769419 wmb(); @@ -222,19 +228,18 @@ void cpu_idle(void) if (hlt_counter) { local_irq_enable(); cpu_relax(); - } else { + } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) pm_idle(); start_critical_timings(); /* - * This will eventually be removed - pm_idle - * functions should always return with IRQs - * enabled. + * pm_idle functions must always + * return with IRQs enabled. */ WARN_ON(irqs_disabled()); + } else local_irq_enable(); - } } leds_event(led_idle_end); rcu_idle_exit(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index e33870ff0ac..ede6443c34d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/regset.h> +#include <linux/audit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +#ifdef __ARMEB__ +#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB +#else +#define AUDIT_ARCH_NR AUDIT_ARCH_ARM +#endif + asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) { unsigned long ip; @@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) if (!ip) audit_syscall_exit(regs); else - audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0, + audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); if (!test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 4285daa077b..7a79b24597b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = { static int twd_cpufreq_init(void) { - if (!IS_ERR(twd_clk)) + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) return cpufreq_register_notifier(&twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 71feb00a1e9..e55cdcbd81f 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -102,13 +102,13 @@ config ARCH_AT91SAM9G45 select HAVE_AT91_DBGU1 select AT91_SAM9G45_RESET -config ARCH_AT91CAP9 - bool "AT91CAP9" +config ARCH_AT91SAM9X5 + bool "AT91SAM9x5 family" select CPU_ARM926T select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_NET_MACB - select HAVE_AT91_DBGU1 + select HAVE_AT91_DBGU0 select AT91_SAM9G45_RESET config ARCH_AT91X40 @@ -447,21 +447,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT91CAP9 - -comment "AT91CAP9 Board Type" - -config MACH_AT91CAP9ADK - bool "Atmel AT91CAP9A-DK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -544,7 +529,7 @@ config AT91_EARLY_DBGU0 depends on HAVE_AT91_DBGU0 config AT91_EARLY_DBGU1 - bool "DBGU on 9263, 9g45 and cap9" + bool "DBGU on 9263 and 9g45" depends on HAVE_AT91_DBGU1 config AT91_EARLY_USART0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 705e1fbded3..8512e53bed9 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_d obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -81,9 +81,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o -# AT91CAP9 board-specific support -obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 8ddafadfdc7..0da66ca4a4f 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,11 +3,7 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM -ifeq ($(CONFIG_ARCH_AT91CAP9),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70410000 -else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) +ifeq ($(CONFIG_ARCH_AT91SAM9G45),y) zreladdr-y += 0x70008000 params_phys-y := 0x70000100 initrd_phys-y := 0x70410000 @@ -17,4 +13,10 @@ params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb +# Keep dtb files sorted alphabetically for each SoC +# sam9g20 +dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb +# sam9x5 +dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c deleted file mode 100644 index a42edc25a87..00000000000 --- a/arch/arm/mach-at91/at91cap9.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/module.h> - -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91_pmc.h> - -#include "soc.h" -#include "generic.h" -#include "clock.h" -#include "sam9_smc.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioABCD_clk = { - .name = "pioABCD_clk", - .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb0_clk = { - .name = "mpb0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb1_clk = { - .name = "mpb1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb2_clk = { - .name = "mpb2_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb3_clk = { - .name = "mpb3_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mpb4_clk = { - .name = "mpb4_clk", - .pmc_mask = 1 << AT91CAP9_ID_MPB4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91CAP9_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91CAP9_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91CAP9_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91CAP9_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91CAP9_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91CAP9_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91CAP9_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91CAP9_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91CAP9_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91CAP9_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91CAP9_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk aestdes_clk = { - .name = "aestdes_clk", - .pmc_mask = 1 << AT91CAP9_ID_AESTDES, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91CAP9_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91CAP9_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91CAP9_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91CAP9_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udphs_clk = { - .name = "udphs_clk", - .pmc_mask = 1 << AT91CAP9_ID_UDPHS, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91CAP9_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioABCD_clk, - &mpb0_clk, - &mpb1_clk, - &mpb2_clk, - &mpb3_clk, - &mpb4_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &aestdes_clk, - &adc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &udphs_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioABCD_clk), - CLKDEV_CON_ID("pioB", &pioABCD_clk), - CLKDEV_CON_ID("pioC", &pioABCD_clk), - CLKDEV_CON_ID("pioD", &pioABCD_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91cap9_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} - -static struct clk_lookup console_clock_lookup; - -void __init at91cap9_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91cap9_gpio[] __initdata = { - { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOA, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOB, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOC, - }, { - .id = AT91CAP9_ID_PIOABCD, - .regbase = AT91CAP9_BASE_PIOD, - } -}; - -/* -------------------------------------------------------------------- - * AT91CAP9 processor initialization - * -------------------------------------------------------------------- */ - -static void __init at91cap9_map_io(void) -{ - at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); -} - -static void __init at91cap9_ioremap_registers(void) -{ - at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); - at91_ioremap_rstc(AT91CAP9_BASE_RSTC); - at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); - at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); -} - -static void __init at91cap9_initialize(void) -{ - arm_pm_restart = at91sam9g45_restart; - at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91cap9_gpio, 4); - - /* Remember the silicon revision */ - if (cpu_is_at91cap9_revB()) - system_rev = 0xB; - else if (cpu_is_at91cap9_revC()) - system_rev = 0xC; -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A, B, C and D */ - 0, /* MP Block Peripheral 0 */ - 0, /* MP Block Peripheral 1 */ - 0, /* MP Block Peripheral 2 */ - 0, /* MP Block Peripheral 3 */ - 0, /* MP Block Peripheral 4 */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, /* Advanced Encryption Standard, Triple DES*/ - 0, /* Analog-to-Digital Converter */ - 0, /* Image Sensor Interface */ - 3, /* LCD Controller */ - 0, /* DMA Controller */ - 2, /* USB Device Port */ - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -struct at91_init_soc __initdata at91cap9_soc = { - .map_io = at91cap9_map_io, - .default_irq_priority = at91cap9_default_irq_priority, - .ioremap_registers = at91cap9_ioremap_registers, - .register_clocks = at91cap9_register_clocks, - .init = at91cap9_initialize, -}; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c deleted file mode 100644 index d298fb7cb21..00000000000 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ /dev/null @@ -1,1273 +0,0 @@ -/* - * arch/arm/mach-at91/at91cap9_devices.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <video/atmel_lcdc.h> - -#include <mach/board.h> -#include <mach/cpu.h> -#include <mach/at91cap9.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91CAP9_UHP_BASE, - .end = AT91CAP9_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_UHP, - .end = AT91CAP9_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], 0); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB HS Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE) - -static struct resource usba_udc_resources[] = { - [0] = { - .start = AT91CAP9_UDPHS_FIFO, - .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_UDPHS, - .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AT91CAP9_ID_UDPHS, - .end = AT91CAP9_ID_UDPHS, - .flags = IORESOURCE_IRQ, - }, -}; - -#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ - [idx] = { \ - .name = nam, \ - .index = idx, \ - .fifo_size = maxpkt, \ - .nr_banks = maxbk, \ - .can_dma = dma, \ - .can_isoc = isoc, \ - } - -static struct usba_ep_data usba_udc_ep[] = { - EP("ep0", 0, 64, 1, 0, 0), - EP("ep1", 1, 1024, 3, 1, 1), - EP("ep2", 2, 1024, 3, 1, 1), - EP("ep3", 3, 1024, 2, 1, 1), - EP("ep4", 4, 1024, 2, 1, 1), - EP("ep5", 5, 1024, 2, 1, 0), - EP("ep6", 6, 1024, 2, 1, 0), - EP("ep7", 7, 1024, 2, 0, 0), -}; - -#undef EP - -/* - * pdata doesn't have room for any endpoints, so we need to - * append room for the ones we need right after it. - */ -static struct { - struct usba_platform_data pdata; - struct usba_ep_data ep[8]; -} usba_udc_data; - -static struct platform_device at91_usba_udc_device = { - .name = "atmel_usba_udc", - .id = -1, - .dev = { - .platform_data = &usba_udc_data.pdata, - }, - .resource = usba_udc_resources, - .num_resources = ARRAY_SIZE(usba_udc_resources), -}; - -void __init at91_add_device_usba(struct usba_platform_data *data) -{ - if (cpu_is_at91cap9_revB()) { - irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS | - AT91_MATRIX_UDPHS_BYPASS_LOCK); - } - else - at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS); - - /* - * Invalid pins are 0 on AT91, but the usba driver is shared - * with AVR32, which use negative values instead. Once/if - * gpio_is_valid() is ported to AT91, revisit this code. - */ - usba_udc_data.pdata.vbus_pin = -EINVAL; - usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep); - memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep)); - - if (data && gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - usba_udc_data.pdata.vbus_pin = data->vbus_pin; - } - - /* Pullup pin is handled internally by USB device peripheral */ - - platform_device_register(&at91_usba_udc_device); -} -#else -void __init at91_add_device_usba(struct usba_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91CAP9_BASE_EMAC, - .end = AT91CAP9_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_EMAC, - .end = AT91CAP9_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91cap9_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI0, - .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI0, - .end = AT91CAP9_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc0_device = { - .name = "at91_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_MCI1, - .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_MCI1, - .end = AT91CAP9_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_mmc1_device = { - .name = "at91_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - - mmc0_data = *data; - platform_device_register(&at91cap9_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA16, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA17, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA18, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 1); - } - - mmc1_data = *data; - platform_device_register(&at91cap9_mmc1_device); - } -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_BASE_ECC, - .end = AT91CAP9_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91cap9_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91cap9_twi_device = { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TWI, - .end = AT91CAP9_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TWI, - .end = AT91CAP9_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_twi_device = { - .name = "at91_i2c", - .id = -1, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91cap9_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI0, - .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI0, - .end = AT91CAP9_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SPI1, - .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SPI1, - .end = AT91CAP9_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91cap9_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91cap9_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91CAP9_BASE_TCB0, - .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_TCB, - .end = AT91CAP9_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91cap9_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91CAP9_BASE_RTT, - .end = AT91CAP9_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at91cap9_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91CAP9_BASE_WDT, - .end = AT91CAP9_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91cap9_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91cap9_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - -static struct resource pwm_resources[] = { - [0] = { - .start = AT91CAP9_BASE_PWMC, - .end = AT91CAP9_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_PWMC, - .end = AT91CAP9_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_pwm0_device = { - .name = "atmel_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */ - - pwm_mask = mask; - - platform_device_register(&at91cap9_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91CAP9_BASE_AC97C, - .end = AT91CAP9_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_AC97C, - .end = AT91CAP9_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ac97_device = { - .name = "atmel_ac97c", - .id = 1, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91cap9_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_info lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91CAP9_LCDC_BASE, - .end = AT91CAP9_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_LCDC, - .end = AT91CAP9_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) -{ - if (!data) - return; - - if (cpu_is_at91cap9_revB()) - irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC0, - .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC0, - .end = AT91CAP9_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc0_device = { - .name = "ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_SSC1, - .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_SSC1, - .end = AT91CAP9_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91cap9_ssc1_device = { - .name = "ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91CAP9_ID_SSC0: - pdev = &at91cap9_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91CAP9_ID_SSC1: - pdev = &at91cap9_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91CAP9_BASE_DBGU, - .end = AT91CAP9_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US0, - .end = AT91CAP9_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US0, - .end = AT91CAP9_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US1, - .end = AT91CAP9_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US1, - .end = AT91CAP9_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91CAP9_BASE_US2, - .end = AT91CAP9_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91CAP9_ID_US2, - .end = AT91CAP9_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91cap9_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91cap9_dbgu_device; - configure_dbgu_pins(); - break; - case AT91CAP9_ID_US0: - pdev = &at91cap9_uart0_device; - configure_usart0_pins(pins); - break; - case AT91CAP9_ID_US1: - pdev = &at91cap9_uart1_device; - configure_usart1_pins(pins); - break; - case AT91CAP9_ID_US2: - pdev = &at91cap9_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(at91_uarts[portnr]->id); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 99c3174e24a..0df1045311e 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -289,13 +289,22 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { } }; +static void at91rm9200_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); +} + static void at91rm9200_restart(char mode, const char *cmd) { /* * Perform a hardware reset with the use of the Watchdog timer. */ - at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); + at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + at91_st_write(AT91_ST_CR, AT91_ST_WDRST); } /* -------------------------------------------------------------------- @@ -310,10 +319,13 @@ static void __init at91rm9200_map_io(void) static void __init at91rm9200_ioremap_registers(void) { + at91rm9200_ioremap_st(AT91RM9200_BASE_ST); + at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256); } static void __init at91rm9200_initialize(void) { + arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 97676bdae99..99ce5c955e3 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include <mach/board.h> #include <mach/at91rm9200.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" @@ -241,15 +242,15 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect = 4; /* can only use EBI ChipSelect 4 */ /* CF takes over CS4, CS5, CS6 */ - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); + csa = at91_ramc_read(0, AT91_EBI_CSA); + at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); /* * Static memory controller timing adjustments. * REVISIT: these timings are in terms of MCK cycles, so * when MCK changes (cpufreq etc) so must these values... */ - at91_sys_write(AT91_SMC_CSR(4), + at91_ramc_write(0, AT91_SMC_CSR(4), AT91_SMC_ACSS_STD | AT91_SMC_DBW_16 | AT91_SMC_BAT @@ -407,11 +408,11 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) return; /* enable the address range of CS3 */ - csa = at91_sys_read(AT91_EBI_CSA); - at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); + csa = at91_ramc_read(0, AT91_EBI_CSA); + at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ - at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN + at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN | AT91_SMC_NWS_(5) | AT91_SMC_TDF_(1) | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */ @@ -1114,7 +1115,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index a028cdf8f97..dd7f782b0b9 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -43,9 +43,9 @@ static inline unsigned long read_CRTR(void) { unsigned long x1, x2; - x1 = at91_sys_read(AT91_ST_CRTR); + x1 = at91_st_read(AT91_ST_CRTR); do { - x2 = at91_sys_read(AT91_ST_CRTR); + x2 = at91_st_read(AT91_ST_CRTR); if (x1 == x2) break; x1 = x2; @@ -58,7 +58,7 @@ static inline unsigned long read_CRTR(void) */ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) { - u32 sr = at91_sys_read(AT91_ST_SR) & irqmask; + u32 sr = at91_st_read(AT91_ST_SR) & irqmask; /* * irqs should be disabled here, but as the irq is shared they are only @@ -110,22 +110,22 @@ static void clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) { /* Disable and flush pending timer interrupts */ - at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); - (void) at91_sys_read(AT91_ST_SR); + at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); + at91_st_read(AT91_ST_SR); last_crtr = read_CRTR(); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: /* PIT for periodic irqs; fixed rate of 1/HZ */ irqmask = AT91_ST_PITS; - at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); + at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); break; case CLOCK_EVT_MODE_ONESHOT: /* ALM for oneshot irqs, set by next_event() * before 32 seconds have passed */ irqmask = AT91_ST_ALMS; - at91_sys_write(AT91_ST_RTAR, last_crtr); + at91_st_write(AT91_ST_RTAR, last_crtr); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -133,7 +133,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) irqmask = 0; break; } - at91_sys_write(AT91_ST_IER, irqmask); + at91_st_write(AT91_ST_IER, irqmask); } static int @@ -156,12 +156,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) alm = read_CRTR(); /* Cancel any pending alarm; flush any pending IRQ */ - at91_sys_write(AT91_ST_RTAR, alm); - (void) at91_sys_read(AT91_ST_SR); + at91_st_write(AT91_ST_RTAR, alm); + at91_st_read(AT91_ST_SR); /* Schedule alarm by writing RTAR. */ alm += delta; - at91_sys_write(AT91_ST_RTAR, alm); + at91_st_write(AT91_ST_RTAR, alm); return status; } @@ -175,15 +175,24 @@ static struct clock_event_device clkevt = { .set_mode = clkevt32k_mode, }; +void __iomem *at91_st_base; + +void __init at91rm9200_ioremap_st(u32 addr) +{ + at91_st_base = ioremap(addr, 256); + if (!at91_st_base) + panic("Impossible to ioremap ST\n"); +} + /* * ST (system timer) module supports both clockevents and clocksource. */ void __init at91rm9200_timer_init(void) { /* Disable all timer interrupts, and clear any pending ones */ - at91_sys_write(AT91_ST_IDR, + at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); - (void) at91_sys_read(AT91_ST_SR); + at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); @@ -192,7 +201,7 @@ void __init at91rm9200_timer_init(void) * directly for the clocksource and all clockevents, after adjusting * its prescaler from the 1 Hz default. */ - at91_sys_write(AT91_ST_RTMR, 1); + at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index d4036ba4361..14b5a9c9a51 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -208,6 +209,13 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + /* more tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -309,27 +317,27 @@ static void __init at91sam9xe_map_io(void) static void __init at91sam9260_map_io(void) { - if (cpu_is_at91sam9xe()) { + if (cpu_is_at91sam9xe()) at91sam9xe_map_io(); - } else if (cpu_is_at91sam9g20()) { - at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE); - at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE); - } else { - at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE); - at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE); - } + else if (cpu_is_at91sam9g20()) + at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE); + else + at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); } static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); + at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); } static void __init at91sam9260_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5a24f0b4554..7e5651ee9f8 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -21,6 +21,7 @@ #include <mach/cpu.h> #include <mach/at91sam9260.h> #include <mach/at91sam9260_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -422,8 +423,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -641,7 +642,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) static struct resource tcb0_resources[] = { [0] = { .start = AT91SAM9260_BASE_TCB0, - .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1, + .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -671,7 +672,7 @@ static struct platform_device at91sam9260_tcb0_device = { static struct resource tcb1_resources[] = { [0] = { .start = AT91SAM9260_BASE_TCB1, - .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1, + .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -698,8 +699,25 @@ static struct platform_device at91sam9260_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9260_tcb0_device); platform_device_register(&at91sam9260_tcb1_device); } @@ -717,18 +735,42 @@ static struct resource rtt_resources[] = { .start = AT91SAM9260_BASE_RTT, .end = AT91SAM9260_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, - } + }, { + .flags = IORESOURCE_MEM, + }, }; static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; + +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9260_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9260_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9260_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9260_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9260_rtt_device); } @@ -1139,7 +1181,6 @@ static inline void configure_usart5_pins(void) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { @@ -1264,7 +1305,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); switch (data->chipselect) { case 4: @@ -1287,7 +1328,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) return; } - at91_sys_write(AT91_MATRIX_EBICSA, csa); + at91_matrix_write(AT91_MATRIX_EBICSA, csa); if (gpio_is_valid(data->rst_pin)) { at91_set_multi_drive(data->rst_pin, 0); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 023c2ff138d..684c5dfd92a 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -282,12 +283,15 @@ static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); + at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX); } static void __init at91sam9261_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 1e28bed8f42..096da87dc00 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,6 +24,7 @@ #include <mach/board.h> #include <mach/at91sam9261.h> #include <mach/at91sam9261_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -236,8 +237,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -603,6 +604,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9261_BASE_RTT, .end = AT91SAM9261_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -610,11 +613,32 @@ static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9261_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9261_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9261_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9261_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9261_rtt_device); } @@ -991,7 +1015,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 75e876c258a..0b4fa5a7f68 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -12,6 +12,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -302,13 +303,17 @@ static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); + at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); + at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX); } static void __init at91sam9263_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 366a7765635..53688c46f95 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -23,6 +23,7 @@ #include <mach/board.h> #include <mach/at91sam9263.h> #include <mach/at91sam9263_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include "generic.h" @@ -409,7 +410,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) * we assume SMC timings are configured by board code, * except True IDE where timings are controlled by driver */ - ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); switch (data->chipselect) { case 4: at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ @@ -428,7 +429,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) data->chipselect); return; } - at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); if (gpio_is_valid(data->det_pin)) { at91_set_gpio_input(data->det_pin, 1); @@ -496,8 +497,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); + at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -891,7 +892,8 @@ static struct platform_device at91sam9263_isi_device = { .num_resources = ARRAY_SIZE(isi_resources), }; -void __init at91_add_device_isi(void) +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) { at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ @@ -904,14 +906,20 @@ void __init at91_add_device_isi(void) at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + + /* TODO: register the PCK for ISI_MCK and set its parent */ + } } #else -void __init at91_add_device_isi(void) {} +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} #endif @@ -959,6 +967,8 @@ static struct resource rtt0_resources[] = { .start = AT91SAM9263_BASE_RTT0, .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -966,7 +976,6 @@ static struct platform_device at91sam9263_rtt0_device = { .name = "at91_rtt", .id = 0, .resource = rtt0_resources, - .num_resources = ARRAY_SIZE(rtt0_resources), }; static struct resource rtt1_resources[] = { @@ -974,6 +983,8 @@ static struct resource rtt1_resources[] = { .start = AT91SAM9263_BASE_RTT1, .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -981,11 +992,53 @@ static struct platform_device at91sam9263_rtt1_device = { .name = "at91_rtt", .id = 1, .resource = rtt1_resources, - .num_resources = ARRAY_SIZE(rtt1_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + struct platform_device *pdev; + struct resource *r; + + switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { + case 0: + /* + * The second resource is needed only for the chosen RTT: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 1; + pdev = &at91sam9263_rtt0_device; + r = rtt0_resources; + break; + case 1: + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 2; + pdev = &at91sam9263_rtt1_device; + r = rtt1_resources; + break; + default: + pr_err("at91sam9263: only supports 2 RTT (%d)\n", + CONFIG_RTC_DRV_AT91SAM9_RTT); + return; + } + + pdev->name = "rtc-at91sam9"; + r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + r[1].end = r[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9263_rtt0_device.num_resources = 1; + at91sam9263_rtt1_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9263_rtt0_device); platform_device_register(&at91sam9263_rtt1_device); } @@ -1371,7 +1424,6 @@ static inline void configure_usart2_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index d89ead740a9..a94758b4273 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -14,6 +14,9 @@ #include <linux/kernel.h> #include <linux/clk.h> #include <linux/clockchips.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91sam926x_pit_interrupt + .handler = at91sam926x_pit_interrupt, + .irq = AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) @@ -149,6 +153,51 @@ static void at91sam926x_pit_reset(void) pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); } +#ifdef CONFIG_OF +static struct of_device_id pit_timer_ids[] = { + { .compatible = "atmel,at91sam9260-pit" }, + { /* sentinel */ } +}; + +static int __init of_at91sam926x_pit_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, pit_timer_ids); + if (!np) + goto err; + + pit_base_addr = of_iomap(np, 0); + if (!pit_base_addr) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) { + pr_crit("AT91: PIT: Unable to get IRQ from DT\n"); + goto ioremap_err; + } + at91sam926x_pit_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(pit_base_addr); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91sam926x_pit_init(void) +{ + return -EINVAL; +} +#endif + /* * Set up both clocksource and clockevent support. */ @@ -156,6 +205,10 @@ static void __init at91sam926x_pit_init(void) { unsigned long pit_rate; unsigned bits; + int ret; + + /* For device tree enabled device: initialize here */ + of_at91sam926x_pit_init(); /* * Use our actual MCK to figure out how many MCK/16 ticks per @@ -177,7 +230,9 @@ static void __init at91sam926x_pit_init(void) clocksource_register_hz(&pit_clk, pit_rate); /* Set up irq handler */ - setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); + ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq); + if (ret) + pr_crit("AT91: PIT: Unable to setup IRQ\n"); /* Set up and register clockevents */ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift); @@ -193,6 +248,15 @@ static void at91sam926x_pit_suspend(void) void __init at91sam926x_ioremap_pit(u32 addr) { +#if defined(CONFIG_OF) + struct device_node *np = + of_find_matching_node(NULL, pit_timer_ids); + + if (np) { + of_node_put(np); + return; + } +#endif pit_base_addr = ioremap(addr, 16); if (!pit_base_addr) diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index 518e4237717..7af2e108b8a 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -15,16 +15,17 @@ #include <linux/linkage.h> #include <mach/hardware.h> -#include <mach/at91sam9_sdramc.h> +#include <mach/at91_ramc.h> #include <mach/at91_rstc.h> .arm .globl at91sam9_alt_restart -at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, =at91_rstc_base - ldr r1, [r1] +at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants + ldr r0, [r0] + ldr r4, =at91_rstc_base + ldr r1, [r4] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -37,6 +38,3 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r4, [r1, #AT91_RSTC_CR] @ reset processor b . - -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 1cb6a96b1c1..0014573dfe1 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -229,6 +229,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk), + /* more tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -331,12 +334,16 @@ static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512); + at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); + at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX); } static void __init at91sam9g45_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b7582dd10dc..4320b209678 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -14,6 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> @@ -24,11 +25,15 @@ #include <mach/board.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> #include <mach/atmel-mci.h> +#include <media/atmel-isi.h> + #include "generic.h" +#include "clock.h" /* -------------------------------------------------------------------- @@ -38,10 +43,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 8, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9G45_BASE_DMA, @@ -56,12 +57,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9g45_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -69,9 +69,15 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); - dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask); - platform_device_register(&at_hdmac_device); +#if defined(CONFIG_OF) + struct device_node *of_node = + of_find_node_by_name(NULL, "dma-controller"); + + if (of_node) + of_node_put(of_node); + else +#endif + platform_device_register(&at_hdmac_device); } #else void __init at91_add_device_hdmac(void) {} @@ -552,8 +558,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -869,6 +875,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} #endif +/* -------------------------------------------------------------------- + * Image Sensor Interface + * -------------------------------------------------------------------- */ +#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE) +static u64 isi_dmamask = DMA_BIT_MASK(32); +static struct isi_platform_data isi_data; + +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9G45_BASE_ISI, + .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9G45_ID_ISI, + .end = AT91SAM9G45_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9g45_isi_device = { + .name = "atmel_isi", + .id = 0, + .dev = { + .dma_mask = &isi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &isi_data, + }, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +static struct clk_lookup isi_mck_lookups[] = { + CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL), +}; + +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) +{ + struct clk *pck; + struct clk *parent; + + if (!data) + return; + isi_data = *data; + + at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */ + + platform_device_register(&at91sam9g45_isi_device); + + if (use_pck_as_mck) { + at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */ + + pck = clk_get(NULL, "pck1"); + parent = clk_get(NULL, "plla"); + + BUG_ON(IS_ERR(pck) || IS_ERR(parent)); + + if (clk_set_parent(pck, parent)) { + pr_err("Failed to set PCK's parent\n"); + } else { + /* Register PCK as ISI_MCK */ + isi_mck_lookups[0].clk = pck; + clkdev_add_table(isi_mck_lookups, + ARRAY_SIZE(isi_mck_lookups)); + } + + clk_put(pck); + clk_put(parent); + } +} +#else +void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck) {} +#endif + /* -------------------------------------------------------------------- * LCD Controller @@ -956,7 +1052,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} static struct resource tcb0_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB0, - .end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -977,7 +1073,7 @@ static struct platform_device at91sam9g45_tcb0_device = { static struct resource tcb1_resources[] = { [0] = { .start = AT91SAM9G45_BASE_TCB1, - .end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1, + .end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -994,8 +1090,25 @@ static struct platform_device at91sam9g45_tcb1_device = { .num_resources = ARRAY_SIZE(tcb1_resources), }; +#if defined(CONFIG_OF) +static struct of_device_id tcb_ids[] = { + { .compatible = "atmel,at91rm9200-tcb" }, + { /*sentinel*/ } +}; +#endif + static void __init at91_add_device_tc(void) { +#if defined(CONFIG_OF) + struct device_node *np; + + np = of_find_matching_node(NULL, tcb_ids); + if (np) { + of_node_put(np); + return; + } +#endif + platform_device_register(&at91sam9g45_tcb0_device); platform_device_register(&at91sam9g45_tcb1_device); } @@ -1098,6 +1211,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9G45_BASE_RTT, .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -1105,11 +1220,32 @@ static struct platform_device at91sam9g45_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9g45_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9g45_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9g45_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9g45_rtt_device); } @@ -1564,7 +1700,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S index 0468be10980..9d457182c86 100644 --- a/arch/arm/mach-at91/at91sam9g45_reset.S +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -12,7 +12,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> -#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91_ramc.h> #include <mach/at91_rstc.h> .arm @@ -20,9 +20,10 @@ .globl at91sam9g45_restart at91sam9g45_restart: - ldr r0, .at91_va_base_sdramc0 @ preload constants - ldr r1, =at91_rstc_base - ldr r1, [r1] + ldr r5, =at91_ramc_base @ preload constants + ldr r0, [r5] + ldr r4, =at91_rstc_base + ldr r1, [r4] mov r2, #1 mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN @@ -35,6 +36,3 @@ at91sam9g45_restart: str r4, [r1, #AT91_RSTC_CR] @ reset processor b . - -.at91_va_base_sdramc0: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d2c91a841cb..63d9372eb18 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -11,6 +11,7 @@ #include <linux/module.h> +#include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -287,12 +288,15 @@ static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); + at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); + at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX); } static void __init at91sam9rl_initialize(void) { + arm_pm_idle = at91sam9_idle; arm_pm_restart = at91sam9_alt_restart; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 61908dce978..eda72e83037 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,6 +20,7 @@ #include <mach/board.h> #include <mach/at91sam9rl.h> #include <mach/at91sam9rl_matrix.h> +#include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <mach/at_hdmac.h> @@ -33,10 +34,6 @@ #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE) static u64 hdmac_dmamask = DMA_BIT_MASK(32); -static struct at_dma_platform_data atdma_pdata = { - .nr_channels = 2, -}; - static struct resource hdmac_resources[] = { [0] = { .start = AT91SAM9RL_BASE_DMA, @@ -51,12 +48,11 @@ static struct resource hdmac_resources[] = { }; static struct platform_device at_hdmac_device = { - .name = "at_hdmac", + .name = "at91sam9rl_dma", .id = -1, .dev = { .dma_mask = &hdmac_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &atdma_pdata, }, .resource = hdmac_resources, .num_resources = ARRAY_SIZE(hdmac_resources), @@ -64,7 +60,6 @@ static struct platform_device at_hdmac_device = { void __init at91_add_device_hdmac(void) { - dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask); platform_device_register(&at_hdmac_device); } #else @@ -271,8 +266,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) if (!data) return; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* enable pin */ if (gpio_is_valid(data->enable_pin)) @@ -688,6 +683,8 @@ static struct resource rtt_resources[] = { .start = AT91SAM9RL_BASE_RTT, .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1, .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_MEM, } }; @@ -695,11 +692,32 @@ static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", .id = 0, .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), }; +#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) +static void __init at91_add_device_rtt_rtc(void) +{ + at91sam9rl_rtt_device.name = "rtc-at91sam9"; + /* + * The second resource is needed: + * GPBR will serve as the storage for RTC time offset + */ + at91sam9rl_rtt_device.num_resources = 2; + rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; + rtt_resources[1].end = rtt_resources[1].start + 3; +} +#else +static void __init at91_add_device_rtt_rtc(void) +{ + /* Only one resource is needed: RTT not used as RTC */ + at91sam9rl_rtt_device.num_resources = 1; +} +#endif + static void __init at91_add_device_rtt(void) { + at91_add_device_rtt_rtc(); platform_device_register(&at91sam9rl_rtt_device); } @@ -1134,7 +1152,6 @@ static inline void configure_usart3_pins(unsigned pins) } static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c new file mode 100644 index 00000000000..a34d96afa74 --- /dev/null +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -0,0 +1,368 @@ +/* + * Chip-specific setup code for the AT91SAM9x5 family + * + * Copyright (C) 2010-2012 Atmel Corporation. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/at91sam9x5.h> +#include <mach/at91_pmc.h> +#include <mach/cpu.h> +#include <mach/board.h> + +#include "soc.h" +#include "generic.h" +#include "clock.h" +#include "sam9_smc.h" + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioAB_clk = { + .name = "pioAB_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pioCD_clk = { + .name = "pioCD_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk smd_clk = { + .name = "smd_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SMD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART2, + .type = CLK_TYPE_PERIPHERAL, +}; +/* USART3 clock - Only for sam9g25/sam9x25 */ +static struct clk usart3_clk = { + .name = "usart3_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_USART3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi0_clk = { + .name = "twi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi1_clk = { + .name = "twi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi2_clk = { + .name = "twi2_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TWI2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart0_clk = { + .name = "uart0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uart1_clk = { + .name = "uart1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UART1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb0_clk = { + .name = "tcb0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwm_clk = { + .name = "pwm_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_PWM, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma0_clk = { + .name = "dma0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma1_clk = { + .name = "dma1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_DMA1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk uhphs_clk = { + .name = "uhphs_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */ +static struct clk macb0_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */ +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* isi clock - Only for sam9g25 */ +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +/* emac1 clock - Only for sam9x25 */ +static struct clk macb1_clk = { + .name = "pclk", + .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc_clk = { + .name = "ssc_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_SSC, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can0 clock - Only for sam9x35 */ +static struct clk can0_clk = { + .name = "can0_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN0, + .type = CLK_TYPE_PERIPHERAL, +}; +/* can1 clock - Only for sam9x35 */ +static struct clk can1_clk = { + .name = "can1_clk", + .pmc_mask = 1 << AT91SAM9X5_ID_CAN1, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioAB_clk, + &pioCD_clk, + &smd_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &twi0_clk, + &twi1_clk, + &twi2_clk, + &mmc0_clk, + &spi0_clk, + &spi1_clk, + &uart0_clk, + &uart1_clk, + &tcb0_clk, + &pwm_clk, + &adc_clk, + &dma0_clk, + &dma1_clk, + &uhphs_clk, + &udphs_clk, + &mmc1_clk, + &ssc_clk, + // irq0 +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_ID("pioA", &pioAB_clk), + CLKDEV_CON_ID("pioB", &pioAB_clk), + CLKDEV_CON_ID("pioC", &pioCD_clk), + CLKDEV_CON_ID("pioD", &pioCD_clk), + /* additional fake clock for macb_hclk */ + CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), + CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), +}; + +/* + * The two programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; + +static void __init at91sam9x5_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25()) + clk_register(&usart3_clk); + + if (cpu_is_at91sam9g25() + || cpu_is_at91sam9x25() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&macb0_clk); + + if (cpu_is_at91sam9g15() + || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35()) + clk_register(&lcdc_clk); + + if (cpu_is_at91sam9g25()) + clk_register(&isi_clk); + + if (cpu_is_at91sam9x25()) + clk_register(&macb1_clk); + + if (cpu_is_at91sam9x25() + || cpu_is_at91sam9x35()) { + clk_register(&can0_clk); + clk_register(&can1_clk); + } + + clk_register(&pck0); + clk_register(&pck1); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 processor initialization + * -------------------------------------------------------------------- */ + +static void __init at91sam9x5_map_io(void) +{ + at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); +} + +static void __init at91sam9x5_ioremap_registers(void) +{ + at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512); +} + +void __init at91sam9x5_initialize(void) +{ + arm_pm_restart = at91sam9g45_restart; + at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); + + /* Register GPIO subsystem (using DT) */ + at91_gpio_init(NULL, 0); +} + +/* -------------------------------------------------------------------- + * AT91SAM9x5 devices (temporary before modification of code) + * -------------------------------------------------------------------- */ +void __init at91_add_device_nand(struct atmel_nand_data *data) {} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A and B */ + 1, /* Parallel IO Controller C and D */ + 4, /* Soft Modem */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ + 6, /* Two-Wire Interface 0 */ + 6, /* Two-Wire Interface 1 */ + 6, /* Two-Wire Interface 2 */ + 0, /* Multimedia Card Interface 0 */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 5, /* UART 0 */ + 5, /* UART 1 */ + 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ + 0, /* Pulse Width Modulation Controller */ + 0, /* ADC Controller */ + 0, /* DMA Controller 0 */ + 0, /* DMA Controller 1 */ + 2, /* USB Host High Speed port */ + 2, /* USB Device High speed port */ + 3, /* Ethernet MAC 0 */ + 3, /* LDC Controller or Image Sensor Interface */ + 0, /* Multimedia Card Interface 1 */ + 3, /* Ethernet MAC 1 */ + 4, /* Synchronous Serial Interface */ + 4, /* CAN Controller 0 */ + 4, /* CAN Controller 1 */ + 0, /* Advanced Interrupt Controller (IRQ0) */ +}; + +struct at91_init_soc __initdata at91sam9x5_soc = { + .map_io = at91sam9x5_map_io, + .default_irq_priority = at91sam9x5_default_irq_priority, + .ioremap_registers = at91sam9x5_ioremap_registers, + .register_clocks = at91sam9x5_register_clocks, + .init = at91sam9x5_initialize, +}; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 56ba3bd035a..5400a1d6503 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> +#include <asm/proc-fns.h> #include <asm/mach/arch.h> #include <mach/at91x40.h> #include <mach/at91_st.h> @@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } +static void at91x40_idle(void) +{ + /* + * Disable the processor clock. The processor will be automatically + * re-enabled by an interrupt or by a reset. + */ + __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR); + cpu_do_idle(); +} + void __init at91x40_initialize(unsigned long main_clock) { + arm_pm_idle = at91x40_idle; at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) | (1 << AT91X40_ID_IRQ2); } diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index dfff2895f4b..6ca680a1d5d 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -28,6 +28,12 @@ #include <asm/mach/time.h> #include <mach/at91_tc.h> +#define at91_tc_read(field) \ + __raw_readl(AT91_TC + field) + +#define at91_tc_write(field, value) \ + __raw_writel(value, AT91_TC + field); + /* * 3 counter/timer units present. */ @@ -37,12 +43,12 @@ static unsigned long at91x40_gettimeoffset(void) { - return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128)); + return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128)); } static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) { - at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR); + at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR); timer_tick(); return IRQ_HANDLED; } @@ -57,20 +63,20 @@ void __init at91x40_timer_init(void) { unsigned int v; - at91_sys_write(AT91_TC + AT91_TC_BCR, 0); - v = at91_sys_read(AT91_TC + AT91_TC_BMR); + at91_tc_write(AT91_TC_BCR, 0); + v = at91_tc_read(AT91_TC_BMR); v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE; - at91_sys_write(AT91_TC + AT91_TC_BMR, v); + at91_tc_write(AT91_TC_BMR, v); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG)); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4)); setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq); - at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); + at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); } struct sys_timer at91x40_timer = { diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c deleted file mode 100644 index ac3de4f7c31..00000000000 --- a/arch/arm/mach-at91/board-cap9adk.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cap9adk.c - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/fb.h> -#include <linux/mtd/physmap.h> - -#include <video/atmel_lcdc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/board.h> -#include <mach/at91cap9_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init cap9adk_init_early(void) -{ - /* Initialize processor: 12 MHz crystal */ - at91_initialize(12000000); - - /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ - at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); - /* ... POWER LED always on */ - at91_set_gpio_output(AT91_PIN_PC29, 1); - - /* Setup the serial ports and console */ - at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */ - at91_set_serial_console(0); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cap9adk_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB HS Device port - */ -static struct usba_platform_data __initdata cap9adk_usba_udc_data = { - .vbus_pin = AT91_PIN_PB31, -}; - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init cap9adk_add_device_ts(void) -{ - at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */ - at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */ -} -#else -static void __init cap9adk_add_device_ts(void) {} -#endif - - -/* - * SPI devices. - */ -static struct spi_board_info cap9adk_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PC4, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata cap9adk_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cap9adk_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata cap9adk_nand_partitions[] = { - { - .name = "NAND partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cap9adk_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = -EINVAL, - .enable_pin = AT91_PIN_PD15, - .parts = cap9adk_nand_partitions, - .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), -}; - -static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 2, - .ncs_write_setup = 1, - .nwe_setup = 2, - - .ncs_read_pulse = 6, - .nrd_pulse = 4, - .ncs_write_pulse = 6, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 1, -}; - -static void __init cap9adk_add_device_nand(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (cap9adk_nand_data.bus_width_16) - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cap9adk_nand_smc_config); - - at91_add_device_nand(&cap9adk_nand_data); -} - - -/* - * NOR flash - */ -static struct mtd_partition cap9adk_nor_partitions[] = { - { - .name = "NOR partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cap9adk_nor_data = { - .width = 2, - .parts = cap9adk_nor_partitions, - .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions), -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_8M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cap9adk_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cap9adk_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata cap9adk_nor_smc_config = { - .ncs_read_setup = 2, - .nrd_setup = 4, - .ncs_write_setup = 2, - .nwe_setup = 4, - - .ncs_read_pulse = 10, - .nrd_pulse = 8, - .ncs_write_pulse = 10, - .nwe_pulse = 8, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static __init void cap9adk_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cap9adk_nor_smc_config); - - platform_device_register(&cap9adk_nor_flash); -} - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ -} - -/* Driver datas */ -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = { - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data; -#endif - - -/* - * AC97 - */ -static struct ac97c_platform_data cap9adk_ac97_data = { - .reset_pin = -EINVAL, -}; - - -static void __init cap9adk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cap9adk_usbh_data); - /* USB HS */ - at91_add_device_usba(&cap9adk_usba_udc_data); - /* SPI */ - at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); - /* Touchscreen */ - cap9adk_add_device_ts(); - /* MMC */ - at91_add_device_mmc(1, &cap9adk_mmc_data); - /* Ethernet */ - at91_add_device_eth(&cap9adk_macb_data); - /* NAND */ - cap9adk_add_device_nand(); - /* NOR Flash */ - cap9adk_add_device_nor(); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LCD Controller */ - at91_add_device_lcdc(&cap9adk_lcdc_data); - /* AC97 */ - at91_add_device_ac97(&cap9adk_ac97_data); -} - -MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") - /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .init_early = cap9adk_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cap9adk_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 9ab3d1ea326..989e1c5a9ca 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/at91sam9_smc.h> #include <mach/at91sam9260_matrix.h> +#include <mach/at91_matrix.h> #include "sam9_smc.h" #include "generic.h" @@ -238,8 +239,8 @@ static __init void cpu9krea_add_device_nor(void) { unsigned long csa; - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); + csa = at91_matrix_read(AT91_MATRIX_EBICSA); + at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); /* configure chip-select 0 (NOR) */ sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 368e1427ad9..e094cc81fe2 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index bb6b434ec0c..583b72472ad 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/gpio.h> -#include <linux/irqdomain.h> +#include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -38,12 +38,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91_initialize(12000000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* det_pin is not connected */ @@ -88,15 +82,17 @@ static void __init ek_add_device_nand(void) at91_add_device_nand(&ek_nand_data); } -static const struct of_device_id aic_of_match[] __initconst = { - { .compatible = "atmel,at91rm9200-aic", }, - {}, +static const struct of_device_id irq_of_match[] __initconst = { + + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, + { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, + { /*sentinel*/ } }; static void __init at91_dt_init_irq(void) { - irq_domain_generate_simple(aic_of_match, 0xfffff000, 0); - at91_init_irq_default(); + of_irq_init(irq_of_match); } static void __init at91_dt_device_init(void) @@ -109,6 +105,7 @@ static void __init at91_dt_device_init(void) static const char *at91_dt_board_compat[] __initdata = { "atmel,at91sam9m10g45ek", + "atmel,at91sam9x5ek", "calao,usb-a9g20", NULL }; diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 07ef35b0ec2..f23aabef855 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,6 +26,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" @@ -110,7 +111,7 @@ static void __init eco920_board_init(void) at91_add_device_mmc(0, &eco920_mmc_data); platform_device_register(&eco920_flash); - at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) + at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) | AT91_SMC_RWSETUP_(1) | AT91_SMC_DBW_8 | AT91_SMC_WSEN @@ -122,7 +123,7 @@ static void __init eco920_board_init(void) at91_set_deglitch(AT91_PIN_PA23, 1); /* Initialization of the Static Memory Controller for Chip Select 3 */ - at91_sys_write(AT91_SMC_CSR(3), + at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_DBW_16 | /* 16 bit */ AT91_SMC_WSEN | AT91_SMC_NWS_(5) | /* wait states */ diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index eec02cd57ce..1815152001f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-at91/board-flexibity.c * - * Copyright (C) 2010 Flexibity + * Copyright (C) 2010-2011 Flexibity * Copyright (C) 2005 SAN People * Copyright (C) 2006 Atmel * @@ -62,6 +62,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = { .pullup_pin = -EINVAL, /* pull-up driven by UDC */ }; +/* I2C devices */ +static struct i2c_board_info __initdata flexibity_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1307", 0x68), + }, +}; + /* SPI devices */ static struct spi_board_info flexibity_spi_devices[] = { { /* DataFlash chip */ @@ -141,6 +148,9 @@ static void __init flexibity_board_init(void) at91_add_device_usbh(&flexibity_usbh_data); /* USB Device */ at91_add_device_udc(&flexibity_udc_data); + /* I2C */ + at91_add_device_i2c(flexibity_i2c_devices, + ARRAY_SIZE(flexibity_i2c_devices)); /* SPI */ at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index d75a4a2ad9c..bb991458201 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/cpu.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab024fa11d5..59e35dd1486 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -39,6 +39,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 782f37946af..9083df04e7e 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index ef7c12a9224..11cbaa8946f 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -41,6 +41,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ea0d1b9c2b7..57497e2b887 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -24,11 +24,13 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/leds.h> -#include <linux/clk.h> #include <linux/atmel-mci.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <video/atmel_lcdc.h> +#include <media/soc_camera.h> +#include <media/atmel-isi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -185,6 +187,71 @@ static void __init ek_add_device_nand(void) /* + * ISI + */ +static struct isi_platform_data __initdata isi_data = { + .frate = ISI_CFG1_FRATE_CAPTURE_ALL, + /* to use codec and preview path simultaneously */ + .full_mode = 1, + .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10, + /* ISI_MCK is provided by programmable clock or external clock */ + .mck_hz = 25000000, +}; + + +/* + * soc-camera OV2640 + */ +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) +static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link) +{ + /* ISI board for ek using default 8-bits connection */ + return SOCAM_DATAWIDTH_8; +} + +static int i2c_camera_power(struct device *dev, int on) +{ + /* enable or disable the camera */ + pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE"); + at91_set_gpio_output(AT91_PIN_PD13, !on); + + if (!on) + goto out; + + /* If enabled, give a reset impulse */ + at91_set_gpio_output(AT91_PIN_PD12, 0); + msleep(20); + at91_set_gpio_output(AT91_PIN_PD12, 1); + msleep(100); + +out: + return 0; +} + +static struct i2c_board_info i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &i2c_camera, + .i2c_adapter_id = 0, + .power = i2c_camera_power, + .query_bus_param = isi_camera_query_bus_param, +}; + +static struct platform_device isi_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, +}; +#endif + + +/* * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) @@ -377,7 +444,12 @@ static struct gpio_led ek_pwm_led[] = { #endif }; - +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_SOC_CAMERA_OV2640) || \ + defined(CONFIG_SOC_CAMERA_OV2640_MODULE) + &isi_ov2640, +#endif +}; static void __init ek_board_init(void) { @@ -399,6 +471,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* I2C */ at91_add_device_i2c(0, NULL, 0); + /* ISI, using programmable clock as ISI_MCK */ + at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* Touch Screen */ @@ -410,6 +484,8 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); + /* Other platform devices */ + platform_add_devices(devices, ARRAY_SIZE(devices)); } MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 4770db08e5a..3c2e3fcc310 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -145,11 +145,11 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { /* Audio codec */ I2C_BOARD_INFO("tlv320aic23", 0x1a), }, - { +}; + +static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = { /* RTC */ I2C_BOARD_INFO("isl1208", 0x6f), - .irq = gpio_to_irq(AT91_PIN_PA31), - }, }; static void __init snapper9260_add_device_nand(void) @@ -163,6 +163,10 @@ static void __init snapper9260_board_init(void) { at91_add_device_i2c(snapper9260_i2c_devices, ARRAY_SIZE(snapper9260_i2c_devices)); + + snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); + i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); + at91_add_device_serial(); at91_add_device_usbh(&snapper9260_usbh_data); at91_add_device_udc(&snapper9260_udc_data); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index bbd553e1cd9..52f460768f7 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> #include <mach/cpu.h> #include "generic.h" @@ -393,7 +394,7 @@ static void yl9200_init_video(void) at91_set_A_periph(AT91_PIN_PC6, 0); /* Initialization of the Static Memory Controller for Chip Select 2 */ - at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ + at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */ | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */ | AT91_SMC_TDF_(0x100) /* float time */ ); diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 61873f3aa92..be51ca7f694 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -28,9 +28,12 @@ #include <mach/at91_pmc.h> #include <mach/cpu.h> +#include <asm/proc-fns.h> + #include "clock.h" #include "generic.h" +void __iomem *at91_pmc_base; /* * There's a lot more which can be done with clocks, including cpufreq @@ -47,26 +50,38 @@ /* * Chips have some kind of clocks : group them by functionality */ -#define cpu_has_utmi() ( cpu_is_at91cap9() \ - || cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45()) +#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ - || cpu_is_at91sam9g45()) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45())) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5())) -#define cpu_has_upll() (cpu_is_at91sam9g45()) +#define cpu_has_upll() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) /* USB host HS & FS */ #define cpu_has_uhp() (!cpu_is_at91sam9rl()) /* USB device FS only */ #define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45())) + || cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5())) + +#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) + +#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ + || cpu_is_at91sam9x5()) + +#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5()) static LIST_HEAD(clocks); static DEFINE_SPINLOCK(clk_lock); @@ -111,11 +126,11 @@ static void pllb_mode(struct clk *clk, int is_on) value = 0; // REVISIT: Add work-around for AT91RM9200 Errata #26 ? - at91_sys_write(AT91_CKGR_PLLBR, value); + at91_pmc_write(AT91_CKGR_PLLBR, value); do { cpu_relax(); - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); } static struct clk pllb = { @@ -130,31 +145,24 @@ static struct clk pllb = { static void pmc_sys_mode(struct clk *clk, int is_on) { if (is_on) - at91_sys_write(AT91_PMC_SCER, clk->pmc_mask); + at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask); else - at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); + at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask); } static void pmc_uckr_mode(struct clk *clk, int is_on) { - unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR); - - if (cpu_is_at91sam9g45()) { - if (is_on) - uckr |= AT91_PMC_BIASEN; - else - uckr &= ~AT91_PMC_BIASEN; - } + unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR); if (is_on) { is_on = AT91_PMC_LOCKU; - at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); + at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); } else - at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); + at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); do { cpu_relax(); - } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); + } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); } /* USB function clocks (PLLB must be 48 MHz) */ @@ -190,9 +198,9 @@ struct clk mck = { static void pmc_periph_mode(struct clk *clk, int is_on) { if (is_on) - at91_sys_write(AT91_PMC_PCER, clk->pmc_mask); + at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); else - at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask); + at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); } static struct clk __init *at91_css_to_clk(unsigned long css) @@ -210,11 +218,24 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return &utmi_clk; else if (cpu_has_pllb()) return &pllb; + break; + /* alternate PMC: can use master clock */ + case AT91_PMC_CSS_MASTER: + return &mck; } return NULL; } +static int pmc_prescaler_divider(u32 reg) +{ + if (cpu_has_alt_prescaler()) { + return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET); + } else { + return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET); + } +} + static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -316,12 +337,22 @@ int clk_set_rate(struct clk *clk, unsigned long rate) { unsigned long flags; unsigned prescale; + unsigned long prescale_offset, css_mask; unsigned long actual; if (!clk_is_programmable(clk)) return -EINVAL; if (clk->users) return -EBUSY; + + if (cpu_has_alt_prescaler()) { + prescale_offset = PMC_ALT_PRES_OFFSET; + css_mask = AT91_PMC_ALT_PCKR_CSS; + } else { + prescale_offset = PMC_PRES_OFFSET; + css_mask = AT91_PMC_CSS; + } + spin_lock_irqsave(&clk_lock, flags); actual = clk->parent->rate_hz; @@ -329,10 +360,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (actual && actual <= rate) { u32 pckr; - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - pckr &= AT91_PMC_CSS; /* clock selection */ - pckr |= prescale << 2; - at91_sys_write(AT91_PMC_PCKR(clk->id), pckr); + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); + pckr &= css_mask; /* keep clock selection */ + pckr |= prescale << prescale_offset; + at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr); clk->rate_hz = actual; break; } @@ -366,7 +397,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent) clk->rate_hz = parent->rate_hz; clk->parent = parent; - at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id); + at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id); spin_unlock_irqrestore(&clk_lock, flags); return 0; @@ -378,11 +409,17 @@ static void __init init_programmable_clock(struct clk *clk) { struct clk *parent; u32 pckr; + unsigned int css_mask; + + if (cpu_has_alt_prescaler()) + css_mask = AT91_PMC_ALT_PCKR_CSS; + else + css_mask = AT91_PMC_CSS; - pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - parent = at91_css_to_clk(pckr & AT91_PMC_CSS); + pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); + parent = at91_css_to_clk(pckr & css_mask); clk->parent = parent; - clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2)); + clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr); } #endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ @@ -396,19 +433,24 @@ static int at91_clk_show(struct seq_file *s, void *unused) u32 scsr, pcsr, uckr = 0, sr; struct clk *clk; - seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); - seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR)); - seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); - seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); - seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); + scsr = at91_pmc_read(AT91_PMC_SCSR); + pcsr = at91_pmc_read(AT91_PMC_PCSR); + sr = at91_pmc_read(AT91_PMC_SR); + seq_printf(s, "SCSR = %8x\n", scsr); + seq_printf(s, "PCSR = %8x\n", pcsr); + seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); + seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); + seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); if (cpu_has_pllb()) - seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR)); - if (cpu_has_utmi()) - seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR)); - seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); + seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR)); + if (cpu_has_utmi()) { + uckr = at91_pmc_read(AT91_CKGR_UCKR); + seq_printf(s, "UCKR = %8x\n", uckr); + } + seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); if (cpu_has_upll()) - seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB)); - seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); + seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); + seq_printf(s, "SR = %8x\n", sr); seq_printf(s, "\n"); @@ -596,16 +638,14 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) if (cpu_is_at91rm9200()) { uhpck.pmc_mask = AT91RM9200_PMC_UHP; udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); + at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91cap9()) { - uhpck.pmc_mask = AT91CAP9_PMC_UHP; } - at91_sys_write(AT91_CKGR_PLLBR, 0); + at91_pmc_write(AT91_CKGR_PLLBR, 0); udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); @@ -622,13 +662,13 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Setup divider by 10 to reach 48 MHz */ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; - at91_sys_write(AT91_PMC_USB, usbr); + at91_pmc_write(AT91_PMC_USB, usbr); /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; uhpck.rate_hz = utmi_clk.rate_hz; - uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); + uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); } int __init at91_clock_init(unsigned long main_clock) @@ -637,6 +677,10 @@ int __init at91_clock_init(unsigned long main_clock) int i; int pll_overclock = false; + at91_pmc_base = ioremap(AT91_PMC, 256); + if (!at91_pmc_base) + panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); + /* * When the bootloader initialized the main oscillator correctly, * there's no problem using the cycle counter. But if it didn't, @@ -645,14 +689,14 @@ int __init at91_clock_init(unsigned long main_clock) */ if (!main_clock) { do { - tmp = at91_sys_read(AT91_CKGR_MCFR); + tmp = at91_pmc_read(AT91_CKGR_MCFR); } while (!(tmp & AT91_PMC_MAINRDY)); main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); } main_clk.rate_hz = main_clock; /* report if PLLA is more than mildly overclocked */ - plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR)); + plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); if (cpu_has_300M_plla()) { if (plla.rate_hz > 300000000) pll_overclock = true; @@ -666,8 +710,8 @@ int __init at91_clock_init(unsigned long main_clock) if (pll_overclock) pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - if (cpu_is_at91sam9g45()) { - mckr = at91_sys_read(AT91_PMC_MCKR); + if (cpu_has_plladiv2()) { + mckr = at91_pmc_read(AT91_PMC_MCKR); plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */ } @@ -688,6 +732,10 @@ int __init at91_clock_init(unsigned long main_clock) * (obtain the USB High Speed 480 MHz when input is 12 MHz) */ utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; + + /* UTMI bias and PLL are managed at the same time */ + if (cpu_has_upll()) + utmi_clk.pmc_mask |= AT91_PMC_BIASEN; } /* @@ -703,10 +751,10 @@ int __init at91_clock_init(unsigned long main_clock) * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. */ - mckr = at91_sys_read(AT91_PMC_MCKR); + mckr = at91_pmc_read(AT91_PMC_MCKR); mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); freq = mck.parent->rate_hz; - freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */ + freq /= pmc_prescaler_divider(mckr); /* prescale */ if (cpu_is_at91rm9200()) { mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } else if (cpu_is_at91sam9g20()) { @@ -714,13 +762,19 @@ int __init at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ if (mckr & AT91_PMC_PDIV) freq /= 2; /* processor clock division */ - } else if (cpu_is_at91sam9g45()) { + } else if (cpu_has_mdiv3()) { mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } else { mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ } + if (cpu_has_alt_prescaler()) { + /* Programmable clocks can use MCK */ + mck.type |= CLK_TYPE_PRIMARY; + mck.id = 4; + } + /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) at91_clk_add(standard_pmc_clocks[i]); @@ -770,9 +824,15 @@ static int __init at91_clock_reset(void) pr_debug("Clocks: disable unused %s\n", clk->name); } - at91_sys_write(AT91_PMC_PCDR, pcdr); - at91_sys_write(AT91_PMC_SCDR, scdr); + at91_pmc_write(AT91_PMC_PCDR, pcdr); + at91_pmc_write(AT91_PMC_SCDR, scdr); return 0; } late_initcall(at91_clock_reset); + +void at91sam9_idle(void) +{ + at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); + cpu_do_idle(); +} diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index a851e6c9842..555d956b3a5 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -39,20 +39,15 @@ static int at91_enter_idle(struct cpuidle_device *dev, { struct timeval before, after; int idle_time; - u32 saved_lpr; local_irq_disable(); do_gettimeofday(&before); if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (index == 1) { - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - saved_lpr = sdram_selfrefresh_enable(); - cpu_do_idle(); - sdram_selfrefresh_disable(saved_lpr); - } + else if (index == 1) + at91_standby(); + do_gettimeofday(&after); local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 594133451c0..459f01a4a54 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -9,6 +9,7 @@ */ #include <linux/clkdev.h> +#include <linux/of.h> /* Map io */ extern void __init at91_map_io(void); @@ -25,9 +26,13 @@ extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); +extern int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent); + /* Timer */ struct sys_timer; +extern void at91rm9200_ioremap_st(u32 addr); extern struct sys_timer at91rm9200_timer; extern void at91sam926x_ioremap_pit(u32 addr); extern struct sys_timer at91sam926x_timer; @@ -45,7 +50,6 @@ extern void __init at91sam9261_set_console_clock(int id); extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); -extern void __init at91cap9_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); #else @@ -57,6 +61,9 @@ struct device; extern void at91_irq_suspend(void); extern void at91_irq_resume(void); +/* idle */ +extern void at91sam9_idle(void); + /* reset */ extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); @@ -65,6 +72,12 @@ extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); +/* Matrix */ +extern void at91_ioremap_matrix(u32 base_addr); + +/* Ram Controler */ +extern void at91_ioremap_ramc(int id, u32 addr, u32 size); + /* GPIO */ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */ @@ -75,5 +88,7 @@ struct at91_gpio_bank { }; extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks); extern void __init at91_gpio_irq_setup(void); +extern int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent); extern int at91_extern_irq; diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 74d6783eeab..325837a264c 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/errno.h> +#include <linux/device.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -20,6 +21,10 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> #include <mach/hardware.h> #include <mach/at91_pio.h> @@ -29,9 +34,12 @@ struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ - int id; /* ID of register bank */ - void __iomem *regbase; /* Base of register bank */ + int pioc_hwirq; /* PIO bank interrupt identifier on AIC */ + int pioc_virq; /* PIO bank Linux virtual interrupt */ + int pioc_idx; /* PIO bank index */ + void __iomem *regbase; /* PIO bank virtual address */ struct clk *clock; /* associated clock */ + struct irq_domain *domain; /* associated irq domain */ }; #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) @@ -43,8 +51,9 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \ +#define AT91_GPIO_CHIP(name, nr_gpio) \ { \ .chip = { \ .label = name, \ @@ -53,20 +62,28 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ - .base = base_gpio, \ + .to_irq = at91_gpiolib_to_irq, \ .ngpio = nr_gpio, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 0x00, 32), - AT91_GPIO_CHIP("pioB", 0x20, 32), - AT91_GPIO_CHIP("pioC", 0x40, 32), - AT91_GPIO_CHIP("pioD", 0x60, 32), - AT91_GPIO_CHIP("pioE", 0x80, 32), + AT91_GPIO_CHIP("pioA", 32), + AT91_GPIO_CHIP("pioB", 32), + AT91_GPIO_CHIP("pioC", 32), + AT91_GPIO_CHIP("pioD", 32), + AT91_GPIO_CHIP("pioE", 32), }; static int gpio_banks; +static unsigned long at91_gpio_caps; + +/* All PIO controllers support PIO3 features */ +#define AT91_GPIO_CAP_PIO3 (1 << 0) + +#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3) + +/*--------------------------------------------------------------------------*/ static inline void __iomem *pin_to_controller(unsigned pin) { @@ -83,6 +100,25 @@ static inline unsigned pin_to_mask(unsigned pin) } +static char peripheral_function(void __iomem *pio, unsigned mask) +{ + char ret = 'X'; + u8 select; + + if (pio) { + if (has_pio3()) { + select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask); + select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1); + ret = 'A' + select; + } else { + ret = __raw_readl(pio + PIO_ABSR) & mask ? + 'B' : 'A'; + } + } + + return ret; +} + /*--------------------------------------------------------------------------*/ /* Not all hardware capabilities are exposed through these calls; they @@ -130,7 +166,14 @@ int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_ASR); + if (has_pio3()) { + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, + pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); + } else { + __raw_writel(mask, pio + PIO_ASR); + } __raw_writel(mask, pio + PIO_PDR); return 0; } @@ -150,7 +193,14 @@ int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) __raw_writel(mask, pio + PIO_IDR); __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); - __raw_writel(mask, pio + PIO_BSR); + if (has_pio3()) { + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, + pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask, + pio + PIO_ABCDSR2); + } else { + __raw_writel(mask, pio + PIO_BSR); + } __raw_writel(mask, pio + PIO_PDR); return 0; } @@ -158,8 +208,50 @@ EXPORT_SYMBOL(at91_set_B_periph); /* - * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and - * configure it for an input. + * mux the pin to the "C" internal peripheral role. + */ +int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_C_periph); + + +/* + * mux the pin to the "D" internal peripheral role. + */ +int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1); + __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_D_periph); + + +/* + * mux the pin to the gpio controller (instead of "A", "B", "C" + * or "D" peripheral), and configure it for an input. */ int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) { @@ -179,8 +271,8 @@ EXPORT_SYMBOL(at91_set_gpio_input); /* - * mux the pin to the gpio controller (instead of "A" or "B" peripheral), - * and configure it for an output. + * mux the pin to the gpio controller (instead of "A", "B", "C" + * or "D" peripheral), and configure it for an output. */ int __init_or_module at91_set_gpio_output(unsigned pin, int value) { @@ -210,12 +302,37 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on) if (!pio) return -EINVAL; + + if (has_pio3() && is_on) + __raw_writel(mask, pio + PIO_IFSCDR); __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); return 0; } EXPORT_SYMBOL(at91_set_deglitch); /* + * enable/disable the debounce filter; + */ +int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + if (is_on) { + __raw_writel(mask, pio + PIO_IFSCER); + __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR); + __raw_writel(mask, pio + PIO_IFER); + } else { + __raw_writel(mask, pio + PIO_IFDR); + } + return 0; +} +EXPORT_SYMBOL(at91_set_debounce); + +/* * enable/disable the multi-driver; This is only valid for output and * allows the output pin to run as an open collector output. */ @@ -233,6 +350,41 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) EXPORT_SYMBOL(at91_set_multi_drive); /* + * enable/disable the pull-down. + * If pull-up already enabled while calling the function, we disable it. + */ +int __init_or_module at91_set_pulldown(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + /* Disable pull-up anyway */ + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_pulldown); + +/* + * disable Schmitt trigger + */ +int __init_or_module at91_disable_schmitt_trig(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio || !has_pio3()) + return -EINVAL; + + __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT); + return 0; +} +EXPORT_SYMBOL(at91_disable_schmitt_trig); + +/* * assuming the pin is muxed as a gpio output, set its value. */ int at91_set_gpio_value(unsigned pin, int value) @@ -273,9 +425,9 @@ static u32 backups[MAX_GPIO_BANKS]; static int gpio_irq_set_wake(struct irq_data *d, unsigned state) { - unsigned pin = irq_to_gpio(d->irq); - unsigned mask = pin_to_mask(pin); - unsigned bank = pin / 32; + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + unsigned mask = 1 << d->hwirq; + unsigned bank = at91_gpio->pioc_idx; if (unlikely(bank >= MAX_GPIO_BANKS)) return -EINVAL; @@ -285,7 +437,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state) else wakeups[bank] &= ~mask; - irq_set_irq_wake(gpio_chip[bank].id, state); + irq_set_irq_wake(at91_gpio->pioc_virq, state); return 0; } @@ -301,9 +453,10 @@ void at91_gpio_suspend(void) __raw_writel(backups[i], pio + PIO_IDR); __raw_writel(wakeups[i], pio + PIO_IER); - if (!wakeups[i]) + if (!wakeups[i]) { + clk_unprepare(gpio_chip[i].clock); clk_disable(gpio_chip[i].clock); - else { + } else { #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); #endif @@ -318,8 +471,10 @@ void at91_gpio_resume(void) for (i = 0; i < gpio_banks; i++) { void __iomem *pio = gpio_chip[i].regbase; - if (!wakeups[i]) - clk_enable(gpio_chip[i].clock); + if (!wakeups[i]) { + if (clk_prepare(gpio_chip[i].clock) == 0) + clk_enable(gpio_chip[i].clock); + } __raw_writel(wakeups[i], pio + PIO_IDR); __raw_writel(backups[i], pio + PIO_IER); @@ -335,7 +490,10 @@ void at91_gpio_resume(void) * To use any AT91_PIN_* as an externally triggered IRQ, first call * at91_set_gpio_input() then maybe enable its glitch filter. * Then just request_irq() with the pin ID; it works like any ARM IRQ - * handler, though it always triggers on rising and falling edges. + * handler. + * First implementation always triggers on rising and falling edges + * whereas the newer PIO3 can be additionally configured to trigger on + * level, edge with any polarity. * * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after * configuring them with at91_set_a_periph() or at91_set_b_periph(). @@ -344,9 +502,9 @@ void at91_gpio_resume(void) static void gpio_irq_mask(struct irq_data *d) { - unsigned pin = irq_to_gpio(d->irq); - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; if (pio) __raw_writel(mask, pio + PIO_IDR); @@ -354,9 +512,9 @@ static void gpio_irq_mask(struct irq_data *d) static void gpio_irq_unmask(struct irq_data *d) { - unsigned pin = irq_to_gpio(d->irq); - void __iomem *pio = pin_to_controller(pin); - unsigned mask = pin_to_mask(pin); + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; if (pio) __raw_writel(mask, pio + PIO_IER); @@ -373,23 +531,66 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) } } +/* Alternate irq type for PIO3 support */ +static int alt_gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << d->hwirq; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + __raw_writel(mask, pio + PIO_ESR); + __raw_writel(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_FALLING: + __raw_writel(mask, pio + PIO_ESR); + __raw_writel(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_LOW: + __raw_writel(mask, pio + PIO_LSR); + __raw_writel(mask, pio + PIO_FELLSR); + break; + case IRQ_TYPE_LEVEL_HIGH: + __raw_writel(mask, pio + PIO_LSR); + __raw_writel(mask, pio + PIO_REHLSR); + break; + case IRQ_TYPE_EDGE_BOTH: + /* + * disable additional interrupt modes: + * fall back to default behavior + */ + __raw_writel(mask, pio + PIO_AIMDR); + return 0; + case IRQ_TYPE_NONE: + default: + pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq)); + return -EINVAL; + } + + /* enable additional interrupt modes */ + __raw_writel(mask, pio + PIO_AIMER); + + return 0; +} + static struct irq_chip gpio_irqchip = { .name = "GPIO", .irq_disable = gpio_irq_mask, .irq_mask = gpio_irq_mask, .irq_unmask = gpio_irq_unmask, - .irq_set_type = gpio_irq_type, + /* .irq_set_type is set dynamically */ .irq_set_wake = gpio_irq_set_wake, }; static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - unsigned irq_pin; struct irq_data *idata = irq_desc_get_irq_data(desc); struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; - u32 isr; + unsigned long isr; + int n; /* temporarily mask (level sensitive) parent IRQ */ chip->irq_ack(idata); @@ -407,13 +608,10 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) continue; } - irq_pin = gpio_to_irq(at91_gpio->chip.base); - - while (isr) { - if (isr & 1) - generic_handle_irq(irq_pin); - irq_pin++; - isr >>= 1; + n = find_first_bit(&isr, BITS_PER_LONG); + while (n < BITS_PER_LONG) { + generic_handle_irq(irq_find_mapping(at91_gpio->domain, n)); + n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } chip->irq_unmask(idata); @@ -424,6 +622,33 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) #ifdef CONFIG_DEBUG_FS +static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask) +{ + char *trigger = NULL; + char *polarity = NULL; + + if (__raw_readl(pio + PIO_IMR) & mask) { + if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) { + trigger = "edge"; + polarity = "both"; + } else { + if (__raw_readl(pio + PIO_ELSR) & mask) { + trigger = "level"; + polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? + "high" : "low"; + } else { + trigger = "edge"; + polarity = __raw_readl(pio + PIO_FRLHSR) & mask ? + "rising" : "falling"; + } + } + seq_printf(s, "IRQ:%s-%s\t", trigger, polarity); + } else { + seq_printf(s, "GPIO:%s\t\t", + __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + } +} + static int at91_gpio_show(struct seq_file *s, void *unused) { int bank, j; @@ -431,7 +656,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused) /* print heading */ seq_printf(s, "Pin\t"); for (bank = 0; bank < gpio_banks; bank++) { - seq_printf(s, "PIO%c\t", 'A' + bank); + seq_printf(s, "PIO%c\t\t", 'A' + bank); }; seq_printf(s, "\n\n"); @@ -445,11 +670,10 @@ static int at91_gpio_show(struct seq_file *s, void *unused) unsigned mask = pin_to_mask(pin); if (__raw_readl(pio + PIO_PSR) & mask) - seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + gpio_printf(s, pio, mask); else - seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); - - seq_printf(s, "\t"); + seq_printf(s, "%c\t\t", + peripheral_function(pio, mask)); } seq_printf(s, "\n"); @@ -488,46 +712,152 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; +#if defined(CONFIG_OF) +static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct at91_gpio_chip *at91_gpio = h->host_data; + + irq_set_lockdep_class(virq, &gpio_lock_class); + + /* + * Can use the "simple" and not "edge" handler since it's + * shorter, and the AIC handles interrupts sanely. + */ + irq_set_chip_and_handler(virq, &gpio_irqchip, + handle_simple_irq); + set_irq_flags(virq, IRQF_VALID); + irq_set_chip_data(virq, at91_gpio); + + return 0; +} + +static struct irq_domain_ops at91_gpio_ops = { + .map = at91_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent) +{ + struct at91_gpio_chip *prev = NULL; + int alias_idx = of_alias_get_id(node, "gpio"); + struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; + + /* Setup proper .irq_set_type function */ + if (has_pio3()) + gpio_irqchip.irq_set_type = alt_gpio_irq_type; + else + gpio_irqchip.irq_set_type = gpio_irq_type; + + /* Disable irqs of this PIO controller */ + __raw_writel(~0, at91_gpio->regbase + PIO_IDR); + + /* Setup irq domain */ + at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, + &at91_gpio_ops, at91_gpio); + if (!at91_gpio->domain) + panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", + at91_gpio->pioc_idx); + + /* Setup chained handler */ + if (at91_gpio->pioc_idx) + prev = &gpio_chip[at91_gpio->pioc_idx - 1]; + + /* The toplevel handler handles one bank of GPIOs, except + * on some SoC it can handles up to three... + * We only set up the handler for the first of the list. + */ + if (prev && prev->next == at91_gpio) + return 0; + + at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), + at91_gpio->pioc_hwirq); + irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); + irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); + + return 0; +} +#else +int __init at91_gpio_of_irq_setup(struct device_node *node, + struct device_node *parent) +{ + return -EINVAL; +} +#endif + +/* + * irqdomain initialization: pile up irqdomains on top of AIC range + */ +static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio) +{ + int irq_base; + + irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0); + if (irq_base < 0) + panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n", + at91_gpio->pioc_idx, irq_base); + at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio, + irq_base, 0, + &irq_domain_simple_ops, NULL); + if (!at91_gpio->domain) + panic("at91_gpio.%d: couldn't allocate irq domain.\n", + at91_gpio->pioc_idx); +} + /* * Called from the processor-specific init to enable GPIO interrupt support. */ void __init at91_gpio_irq_setup(void) { - unsigned pioc, irq = gpio_to_irq(0); + unsigned pioc; + int gpio_irqnbr = 0; struct at91_gpio_chip *this, *prev; + /* Setup proper .irq_set_type function */ + if (has_pio3()) + gpio_irqchip.irq_set_type = alt_gpio_irq_type; + else + gpio_irqchip.irq_set_type = gpio_irq_type; + for (pioc = 0, this = gpio_chip, prev = NULL; pioc++ < gpio_banks; prev = this, this++) { - unsigned id = this->id; - unsigned i; + int offset; __raw_writel(~0, this->regbase + PIO_IDR); - for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32; - i++, irq++) { - irq_set_lockdep_class(irq, &gpio_lock_class); + /* setup irq domain for this GPIO controller */ + at91_gpio_irqdomain(this); + + for (offset = 0; offset < this->chip.ngpio; offset++) { + unsigned int virq = irq_find_mapping(this->domain, offset); + irq_set_lockdep_class(virq, &gpio_lock_class); /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. */ - irq_set_chip_and_handler(irq, &gpio_irqchip, + irq_set_chip_and_handler(virq, &gpio_irqchip, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); + set_irq_flags(virq, IRQF_VALID); + irq_set_chip_data(virq, this); + + gpio_irqnbr++; } /* The toplevel handler handles one bank of GPIOs, except - * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in - * the list, so we only set up that handler. + * on some SoC it can handles up to three... + * We only set up the handler for the first of the list. */ if (prev && prev->next == this) continue; - irq_set_chip_data(id, this); - irq_set_chained_handler(id, gpio_irq_handler); + this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq); + irq_set_chip_data(this->pioc_virq, this); + irq_set_chained_handler(this->pioc_virq, gpio_irq_handler); } - pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks); + pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks); } /* gpiolib support */ @@ -593,48 +923,175 @@ static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) at91_get_gpio_value(pin) ? "set" : "clear"); else - seq_printf(s, "[periph %s]\n", - __raw_readl(pio + PIO_ABSR) & - mask ? "B" : "A"); + seq_printf(s, "[periph %c]\n", + peripheral_function(pio, mask)); } } } +static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + int virq; + + if (offset < chip->ngpio) + virq = irq_create_mapping(at91_gpio->domain, offset); + else + virq = -ENXIO; + + dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", + chip->label, offset + chip->base, virq); + return virq; +} + +static int __init at91_gpio_setup_clk(int idx) +{ + struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; + + /* retreive PIO controller's clock */ + at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); + if (IS_ERR(at91_gpio->clock)) { + pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx); + goto err; + } + + if (clk_prepare(at91_gpio->clock)) + goto clk_prep_err; + + /* enable PIO controller's clock */ + if (clk_enable(at91_gpio->clock)) { + pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx); + goto clk_err; + } + + return 0; + +clk_err: + clk_unprepare(at91_gpio->clock); +clk_prep_err: + clk_put(at91_gpio->clock); +err: + return -EINVAL; +} + +#ifdef CONFIG_OF_GPIO +static void __init of_at91_gpio_init_one(struct device_node *np) +{ + int alias_idx; + struct at91_gpio_chip *at91_gpio; + + if (!np) + return; + + alias_idx = of_alias_get_id(np, "gpio"); + if (alias_idx >= MAX_GPIO_BANKS) { + pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", + alias_idx, MAX_GPIO_BANKS); + return; + } + + at91_gpio = &gpio_chip[alias_idx]; + at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; + + at91_gpio->regbase = of_iomap(np, 0); + if (!at91_gpio->regbase) { + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", + alias_idx); + return; + } + + /* Get the interrupts property */ + if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { + pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", + alias_idx); + goto ioremap_err; + } + + /* Get capabilities from compatibility property */ + if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) + at91_gpio_caps |= AT91_GPIO_CAP_PIO3; + + /* Setup clock */ + if (at91_gpio_setup_clk(alias_idx)) + goto ioremap_err; + + at91_gpio->chip.of_node = np; + gpio_banks = max(gpio_banks, alias_idx + 1); + at91_gpio->pioc_idx = alias_idx; + return; + +ioremap_err: + iounmap(at91_gpio->regbase); +} + +static int __init of_at91_gpio_init(void) +{ + struct device_node *np = NULL; + + /* + * This isn't ideal, but it gets things hooked up until this + * driver is converted into a platform_device + */ + for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") + of_at91_gpio_init_one(np); + + return gpio_banks > 0 ? 0 : -EINVAL; +} +#else +static int __init of_at91_gpio_init(void) +{ + return -EINVAL; +} +#endif + +static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) +{ + struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; + + at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->pioc_hwirq = pioc_hwirq; + at91_gpio->pioc_idx = idx; + + at91_gpio->regbase = ioremap(regbase, 512); + if (!at91_gpio->regbase) { + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx); + return; + } + + if (at91_gpio_setup_clk(idx)) + goto ioremap_err; + + gpio_banks = max(gpio_banks, idx + 1); + return; + +ioremap_err: + iounmap(at91_gpio->regbase); +} + /* * Called from the processor-specific init to enable GPIO pin support. */ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) { - unsigned i; + unsigned i; struct at91_gpio_chip *at91_gpio, *last = NULL; BUG_ON(nr_banks > MAX_GPIO_BANKS); - gpio_banks = nr_banks; + if (of_at91_gpio_init() < 0) { + /* No GPIO controller found in device tree */ + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); + } - for (i = 0; i < nr_banks; i++) { + for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; - at91_gpio->id = data[i].id; - at91_gpio->chip.base = i * 32; - - at91_gpio->regbase = ioremap(data[i].regbase, 512); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i); - continue; - } - - at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label); - if (!at91_gpio->clock) { - pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i); - continue; - } - - /* enable PIO controller's clock */ - clk_enable(at91_gpio->clock); - - /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ - if (last && last->id == at91_gpio->id) + /* + * GPIO controller are grouped on some SoC: + * PIOC, PIOD and PIOE can share the same IRQ line + */ + if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq) last->next = at91_gpio; last = at91_gpio; diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h new file mode 100644 index 00000000000..02fae9de746 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_matrix.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +#ifndef __MACH_AT91_MATRIX_H__ +#define __MACH_AT91_MATRIX_H__ + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_matrix_base; + +#define at91_matrix_read(field) \ + __raw_readl(at91_matrix_base + field) + +#define at91_matrix_write(field, value) \ + __raw_writel(value, at91_matrix_base + field); + +#else +.extern at91_matrix_base +#endif + +#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h index c6a31bf8a5c..732b11c37f1 100644 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ b/arch/arm/mach-at91/include/mach/at91_pio.h @@ -40,10 +40,35 @@ #define PIO_PUER 0x64 /* Pull-up Enable Register */ #define PIO_PUSR 0x68 /* Pull-up Status Register */ #define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ #define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ #define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ +#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ +#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ +#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ +#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ +#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ +#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ #define PIO_OWER 0xa0 /* Output Write Enable Register */ #define PIO_OWDR 0xa4 /* Output Write Disable Register */ #define PIO_OWSR 0xa8 /* Output Write Status Register */ +#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ +#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ +#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ +#define PIO_ESR 0xc0 /* Edge Select Register */ +#define PIO_LSR 0xc4 /* Level Select Register */ +#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ +#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ +#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ +#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ +#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ + +#define ABCDSR_PERIPH_A 0x0 +#define ABCDSR_PERIPH_B 0x1 +#define ABCDSR_PERIPH_C 0x2 +#define ABCDSR_PERIPH_D 0x3 #endif diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index e46f93e34aa..36604782a78 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -16,17 +16,27 @@ #ifndef AT91_PMC_H #define AT91_PMC_H -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_pmc_base; -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define at91_pmc_read(field) \ + __raw_readl(at91_pmc_base + field) + +#define at91_pmc_write(field, value) \ + __raw_writel(value, at91_pmc_base + field) +#else +.extern at91_aic_base +#endif + +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ + +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -36,27 +46,31 @@ #define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ #define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ #define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ +#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ #define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ #define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ #define AT91_PMC_DIV (0xff << 0) /* Divider */ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ @@ -67,27 +81,37 @@ #define AT91_PMC_USBDIV_4 (2 << 28) #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ #define AT91_PMC_CSS_SLOW (0 << 0) #define AT91_PMC_CSS_MAIN (1 << 0) #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) #define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ -#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) -#define AT91_PMC_PRES_2 (1 << 2) -#define AT91_PMC_PRES_4 (2 << 2) -#define AT91_PMC_PRES_8 (3 << 2) -#define AT91_PMC_PRES_16 (4 << 2) -#define AT91_PMC_PRES_32 (5 << 2) -#define AT91_PMC_PRES_64 (6 << 2) +#define PMC_PRES_OFFSET 2 +#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) +#define PMC_ALT_PRES_OFFSET 4 +#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ +#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ #define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ #define AT91RM9200_PMC_MDIV_2 (1 << 8) #define AT91RM9200_PMC_MDIV_3 (2 << 8) #define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) #define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ @@ -99,35 +123,55 @@ #define AT91_PMC_PLLADIV2_OFF (0 << 12) #define AT91_PMC_PLLADIV2_ON (1 << 12) -#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ #define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ #define AT91_PMC_USBS_PLLA (0 << 0) #define AT91_PMC_USBS_UPLL (1 << 0) #define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ +#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ +#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ +#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) + +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ +#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ #define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ #define AT91_PMC_CSSMCK_CSS (0 << 8) #define AT91_PMC_CSSMCK_MCK (1 << 8) -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ +#define AT91_PMC_SR 0x68 /* Status Register */ #define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ +#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ +#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ + +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ +#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ +#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ +#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ -#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */ -#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ +#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ +#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ -#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */ +#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */ +#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */ +#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV) +#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h new file mode 100644 index 00000000000..d8aeb278614 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91_ramc.h @@ -0,0 +1,32 @@ +/* + * Header file for the Atmel RAM Controller + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __AT91_RAMC_H__ +#define __AT91_RAMC_H__ + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_ramc_base[]; + +#define at91_ramc_read(id, field) \ + __raw_readl(at91_ramc_base[id] + field) + +#define at91_ramc_write(id, field, value) \ + __raw_writel(value, at91_ramc_base[id] + field) +#else +.extern at91_ramc_base +#endif + +#define AT91_MEMCTRL_MC 0 +#define AT91_MEMCTRL_SDRAMC 1 +#define AT91_MEMCTRL_DDRSDR 2 + +#include <mach/at91rm9200_sdramc.h> +#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91sam9_sdramc.h> + +#endif /* __AT91_RAMC_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h index 8847173e410..969aac27109 100644 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ b/arch/arm/mach-at91/include/mach/at91_st.h @@ -16,34 +16,46 @@ #ifndef AT91_ST_H #define AT91_ST_H -#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_st_base; + +#define at91_st_read(field) \ + __raw_readl(at91_st_base + field) + +#define at91_st_write(field, value) \ + __raw_writel(value, at91_st_base + field); +#else +.extern at91_st_base +#endif + +#define AT91_ST_CR 0x00 /* Control Register */ #define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ -#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ +#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ #define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ -#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ +#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ #define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ #define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ #define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ -#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ +#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ #define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ -#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ +#define AT91_ST_SR 0x10 /* Status Register */ #define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ #define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ #define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ #define AT91_ST_ALMS (1 << 3) /* Alarm Status */ -#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ -#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ -#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ +#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ +#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ -#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ +#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ #define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ -#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ +#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ #define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h deleted file mode 100644 index 61d952902f2..00000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (cpu_is_at91cap9_revB() ? \ - (0xfffffd50 - AT91_BASE_SYS) : \ - (0xfffffd60 - AT91_BASE_SYS)) - -#define AT91CAP9_BASE_ECC 0xffffe200 -#define AT91CAP9_BASE_DMA 0xffffec00 -#define AT91CAP9_BASE_SMC 0xffffe800 -#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1 -#define AT91CAP9_BASE_PIOA 0xfffff200 -#define AT91CAP9_BASE_PIOB 0xfffff400 -#define AT91CAP9_BASE_PIOC 0xfffff600 -#define AT91CAP9_BASE_PIOD 0xfffff800 -#define AT91CAP9_BASE_RSTC 0xfffffd00 -#define AT91CAP9_BASE_SHDWC 0xfffffd10 -#define AT91CAP9_BASE_RTT 0xfffffd20 -#define AT91CAP9_BASE_PIT 0xfffffd30 -#define AT91CAP9_BASE_WDT 0xfffffd40 - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h deleted file mode 100644 index 4b9d4aff4b4..00000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index bacb5114181..603e6aac2a4 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -77,26 +77,22 @@ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ -#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ -#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ - #define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */ #define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */ #define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */ #define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */ #define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */ +#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */ #define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ +#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */ #define AT91_USART0 AT91RM9200_BASE_US0 #define AT91_USART1 AT91RM9200_BASE_US1 #define AT91_USART2 AT91RM9200_BASE_US2 #define AT91_USART3 AT91RM9200_BASE_US3 -#define AT91_MATRIX 0 /* not supported */ - /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h index d34e4ed8934..aeaadfb452a 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h @@ -17,10 +17,10 @@ #define AT91RM9200_MC_H /* Memory Controller */ -#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ +#define AT91_MC_RCR 0x00 /* MC Remap Control Register */ #define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ -#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ +#define AT91_MC_ASR 0x04 /* MC Abort Status Register */ #define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ #define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ #define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ @@ -40,16 +40,16 @@ #define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ #define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ -#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ +#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */ -#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ +#define AT91_MC_MPR 0x0c /* MC Master Priority Register */ #define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ #define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ #define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ #define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ /* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ +#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */ #define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ #define AT91_EBI_CS0A_SMC (0 << 0) #define AT91_EBI_CS0A_BFC (1 << 0) @@ -66,7 +66,7 @@ #define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ /* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ +#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */ #define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ #define AT91_SMC_NWS_(x) ((x) << 0) #define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ @@ -87,52 +87,8 @@ #define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ #define AT91_SMC_RWHOLD_(x) ((x) << 28) -/* SDRAM Controller registers */ -#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91_SDRAMC_MODE_NOP (1 << 0) -#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91_SDRAMC_MODE_LMR (3 << 0) -#define AT91_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 4) -#define AT91_SDRAMC_DBW_16 (1 << 4) - -#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ -#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ -#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ - /* Burst Flash Controller register */ -#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ +#define AT91_BFC_MR 0xc0 /* Mode Register */ #define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ #define AT91_BFC_BFCOM_DISABLED (0 << 0) #define AT91_BFC_BFCOM_ASYNC (1 << 0) diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h new file mode 100644 index 00000000000..aa047f458f1 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h @@ -0,0 +1,63 @@ +/* + * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Memory Controllers (SDRAMC only) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91RM9200_SDRAMC_H +#define AT91RM9200_SDRAMC_H + +/* SDRAM Controller registers */ +#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ +#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) +#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) +#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) +#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) +#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) +#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ +#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) +#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) + +#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ +#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ + +#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ +#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91RM9200_SDRAMC_NC_8 (0 << 0) +#define AT91RM9200_SDRAMC_NC_9 (1 << 0) +#define AT91RM9200_SDRAMC_NC_10 (2 << 0) +#define AT91RM9200_SDRAMC_NC_11 (3 << 0) +#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91RM9200_SDRAMC_NR_11 (0 << 2) +#define AT91RM9200_SDRAMC_NR_12 (1 << 2) +#define AT91RM9200_SDRAMC_NR_13 (2 << 2) +#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91RM9200_SDRAMC_NB_2 (0 << 4) +#define AT91RM9200_SDRAMC_NB_4 (1 << 4) +#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) +#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ +#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ +#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ +#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ +#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ +#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ + +#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ +#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ +#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ +#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ +#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ +#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index fa5ca278ade..08ae9afd00f 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -78,15 +78,12 @@ #define AT91SAM9260_BASE_ADC 0xfffe0000 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - #define AT91SAM9260_BASE_ECC 0xffffe800 +#define AT91SAM9260_BASE_SDRAMC 0xffffea00 #define AT91SAM9260_BASE_SMC 0xffffec00 +#define AT91SAM9260_BASE_MATRIX 0xffffee00 #define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 @@ -96,6 +93,7 @@ #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 #define AT91SAM9260_BASE_WDT 0xfffffd40 +#define AT91SAM9260_BASE_GPBR 0xfffffd50 #define AT91_USART0 AT91SAM9260_BASE_US0 #define AT91_USART1 AT91SAM9260_BASE_US1 @@ -115,6 +113,8 @@ #define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ #define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ #define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ +#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */ +#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */ #define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ @@ -128,6 +128,8 @@ #define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ #define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ #define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ +#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */ +#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ #define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h index 020f02ed921..f459df42062 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h @@ -15,12 +15,12 @@ #ifndef AT91SAM9260_MATRIX_H #define AT91SAM9260_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -28,11 +28,11 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -43,11 +43,11 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -55,11 +55,11 @@ #define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ #define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 7cde2d36570..44fbdc12ee6 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -63,14 +63,11 @@ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - #define AT91SAM9261_BASE_SMC 0xffffec00 +#define AT91SAM9261_BASE_MATRIX 0xffffee00 +#define AT91SAM9261_BASE_SDRAMC 0xffffea00 #define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 @@ -80,6 +77,7 @@ #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 #define AT91SAM9261_BASE_WDT 0xfffffd40 +#define AT91SAM9261_BASE_GPBR 0xfffffd50 #define AT91_USART0 AT91SAM9261_BASE_US0 #define AT91_USART1 AT91SAM9261_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h index 69c6501915d..a50cdf8b8ca 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h @@ -15,15 +15,15 @@ #ifndef AT91SAM9261_MATRIX_H #define AT91SAM9261_MATRIX_H -#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ +#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -31,7 +31,7 @@ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) #define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ +#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -43,7 +43,7 @@ #define AT91_MATRIX_DTCM_32 (6 << 4) #define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) @@ -58,7 +58,7 @@ #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ +#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ #define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 5949abda962..d96cbb2e03c 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -72,18 +72,15 @@ #define AT91SAM9263_BASE_2DGE 0xfffc8000 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) -#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - #define AT91SAM9263_BASE_ECC0 0xffffe000 +#define AT91SAM9263_BASE_SDRAMC0 0xffffe200 #define AT91SAM9263_BASE_SMC0 0xffffe400 #define AT91SAM9263_BASE_ECC1 0xffffe600 +#define AT91SAM9263_BASE_SDRAMC1 0xffffe800 #define AT91SAM9263_BASE_SMC1 0xffffea00 +#define AT91SAM9263_BASE_MATRIX 0xffffec00 #define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1 #define AT91SAM9263_BASE_PIOA 0xfffff200 #define AT91SAM9263_BASE_PIOB 0xfffff400 @@ -96,6 +93,7 @@ #define AT91SAM9263_BASE_PIT 0xfffffd30 #define AT91SAM9263_BASE_WDT 0xfffffd40 #define AT91SAM9263_BASE_RTT1 0xfffffd50 +#define AT91SAM9263_BASE_GPBR 0xfffffd60 #define AT91_USART0 AT91SAM9263_BASE_US0 #define AT91_USART1 AT91SAM9263_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h index 9b3efd3eb2f..ebb5fdb565e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h @@ -15,15 +15,15 @@ #ifndef AT91SAM9263_MATRIX_H #define AT91SAM9263_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -31,14 +31,14 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -49,22 +49,22 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -75,7 +75,7 @@ #define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ #define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -86,7 +86,7 @@ #define AT91_MATRIX_RCB7 (1 << 7) #define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -96,7 +96,7 @@ #define AT91_MATRIX_DTCM_16 (5 << 4) #define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ #define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) @@ -114,7 +114,7 @@ #define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) #define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ +#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ #define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index e2f8da8ce5b..0210797abf2 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -59,7 +59,6 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ @@ -76,7 +75,6 @@ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ -#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -94,11 +92,9 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ -#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 #define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ @@ -106,16 +102,10 @@ #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ -#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ #define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ @@ -131,10 +121,4 @@ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h index 100f5a59292..3d085a9a745 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -82,10 +82,4 @@ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_SDRAMC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_SDRAMC##num + reg, value) - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index dd9c95ea086..d052abcff85 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -84,17 +84,14 @@ #define AT91SAM9G45_BASE_TC5 0xfffd4080 /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ -#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - #define AT91SAM9G45_BASE_ECC 0xffffe200 +#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400 +#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600 #define AT91SAM9G45_BASE_DMA 0xffffec00 #define AT91SAM9G45_BASE_SMC 0xffffe800 +#define AT91SAM9G45_BASE_MATRIX 0xffffea00 #define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1 #define AT91SAM9G45_BASE_PIOA 0xfffff200 #define AT91SAM9G45_BASE_PIOB 0xfffff400 @@ -107,6 +104,7 @@ #define AT91SAM9G45_BASE_PIT 0xfffffd30 #define AT91SAM9G45_BASE_WDT 0xfffffd40 #define AT91SAM9G45_BASE_RTC 0xfffffdb0 +#define AT91SAM9G45_BASE_GPBR 0xfffffd60 #define AT91_USART0 AT91SAM9G45_BASE_US0 #define AT91_USART1 AT91SAM9G45_BASE_US1 diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h index c972d60e0ae..b76e2ed2fbc 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h @@ -15,18 +15,18 @@ #ifndef AT91SAM9G45_MATRIX_H #define AT91SAM9G45_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -37,14 +37,14 @@ #define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) #define AT91_MATRIX_ULBT_128 (7 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ #define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -52,22 +52,22 @@ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) #define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -81,7 +81,7 @@ #define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ #define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -95,7 +95,7 @@ #define AT91_MATRIX_RCB10 (1 << 10) #define AT91_MATRIX_RCB11 (1 << 11) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_32 (6 << 0) @@ -107,12 +107,12 @@ #define AT91_MATRIX_TCM_NO_WS (0x0 << 11) #define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) -#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ +#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ #define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ #define AT91C_VDEC_SEL_OFF (0 << 0) #define AT91C_VDEC_SEL_ON (1 << 0) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) #define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) @@ -138,13 +138,13 @@ #define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) #define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ #define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ #define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) #define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) #define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ #define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ #define AT91_MATRIX_WPSR_NO_WPV (0 << 0) #define AT91_MATRIX_WPSR_WPV (1 << 0) diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index d7bead7118d..e0073eb1014 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -69,15 +69,13 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9RL_BASE_DMA 0xffffe600 #define AT91SAM9RL_BASE_ECC 0xffffe800 +#define AT91SAM9RL_BASE_SDRAMC 0xffffea00 #define AT91SAM9RL_BASE_SMC 0xffffec00 +#define AT91SAM9RL_BASE_MATRIX 0xffffee00 #define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0 #define AT91SAM9RL_BASE_PIOA 0xfffff400 #define AT91SAM9RL_BASE_PIOB 0xfffff600 @@ -88,6 +86,7 @@ #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 #define AT91SAM9RL_BASE_WDT 0xfffffd40 +#define AT91SAM9RL_BASE_GPBR 0xfffffd60 #define AT91SAM9RL_BASE_RTC 0xfffffe00 #define AT91_USART0 AT91SAM9RL_BASE_US0 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h index 5f9149071fe..6d160adadaf 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h @@ -14,12 +14,12 @@ #ifndef AT91SAM9RL_MATRIX_H #define AT91SAM9RL_MATRIX_H -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ #define AT91_MATRIX_ULBT_INFINITE (0 << 0) #define AT91_MATRIX_ULBT_SINGLE (1 << 0) @@ -27,12 +27,12 @@ #define AT91_MATRIX_ULBT_EIGHT (3 << 0) #define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ #define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ #define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) @@ -43,12 +43,12 @@ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ #define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ #define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ #define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ @@ -56,7 +56,7 @@ #define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ #define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_RCB2 (1 << 2) @@ -64,7 +64,7 @@ #define AT91_MATRIX_RCB4 (1 << 4) #define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ +#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ #define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ #define AT91_MATRIX_ITCM_0 (0 << 0) #define AT91_MATRIX_ITCM_16 (5 << 0) @@ -74,7 +74,7 @@ #define AT91_MATRIX_DTCM_16 (5 << 4) #define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ +#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h new file mode 100644 index 00000000000..a297a77d88e --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -0,0 +1,79 @@ +/* + * Chip-specific header file for the AT91SAM9x5 family + * + * Copyright (C) 2009-2012 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9x5 datasheet. + * + * Licensed under GPLv2 or later. + */ + +#ifndef AT91SAM9X5_H +#define AT91SAM9X5_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define AT91SAM9X5_ID_USART0 5 /* USART 0 */ +#define AT91SAM9X5_ID_USART1 6 /* USART 1 */ +#define AT91SAM9X5_ID_USART2 7 /* USART 2 */ +#define AT91SAM9X5_ID_USART3 8 /* USART 3 */ +#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */ +#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */ +#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define AT91SAM9X5_ID_UART0 15 /* UART 0 */ +#define AT91SAM9X5_ID_UART1 16 /* UART 1 */ +#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */ +#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */ +#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */ +#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */ +#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */ +#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */ +#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */ +#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */ +#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */ +#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */ +#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */ +#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */ +#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */ +#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9X5_BASE_USART0 0xf801c000 +#define AT91SAM9X5_BASE_USART1 0xf8020000 +#define AT91SAM9X5_BASE_USART2 0xf8024000 + +/* + * System Peripherals + */ +#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800 + +/* + * Base addresses for early serial code (uncompress.h) + */ +#define AT91_DBGU AT91_BASE_DBGU0 +#define AT91_USART0 AT91SAM9X5_BASE_USART0 +#define AT91_USART1 AT91SAM9X5_BASE_USART1 +#define AT91_USART2 AT91SAM9X5_BASE_USART2 + +/* + * Internal Memory. + */ +#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */ + +#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h new file mode 100644 index 00000000000..a606d396647 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h @@ -0,0 +1,53 @@ +/* + * Matrix-centric header file for the AT91SAM9x5 family + * + * Copyright (C) 2009-2012 Atmel Corporation. + * + * Only EBI related registers. + * Write Protect register definitions may be useful. + * + * Licensed under GPLv2 or later. + */ + +#ifndef AT91SAM9X5_MATRIX_H +#define AT91SAM9X5_MATRIX_H + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) +#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index a57829f4fd1..90680217064 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -28,18 +28,18 @@ #define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ /* - * System Peripherals (offset from AT91_BASE_SYS) + * System Peripherals */ #define AT91_BASE_SYS 0xffc00000 -#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */ -#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */ -#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */ -#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */ -#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */ -#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ -#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ +#define AT91_EBI 0xffe00000 /* External Bus Interface */ +#define AT91_SF 0xfff00000 /* Special Function */ +#define AT91_USART1 0xfffcc000 /* USART 1 */ +#define AT91_USART0 0xfffd0000 /* USART 0 */ +#define AT91_TC 0xfffe0000 /* Timer Counter */ +#define AT91_PIOA 0xffff0000 /* PIO Controller A */ +#define AT91_PS 0xffff4000 /* Power Save */ +#define AT91_WD 0xffff8000 /* Watchdog Timer */ /* * The AT91x40 series doesn't have a debug unit like the other AT91 parts. diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 3b33f07b1e1..dc8d6d4f17c 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -107,6 +107,8 @@ struct atmel_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ + u8 correction_cap; /* PMECC correction capability */ + u16 sector_size; /* Sector size for PMECC */ struct mtd_partition *parts; unsigned int num_parts; }; @@ -179,7 +181,9 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); extern void __init at91_add_device_ac97(struct ac97c_platform_data *data); /* ISI */ -extern void __init at91_add_device_isi(void); +struct isi_platform_data; +extern void __init at91_add_device_isi(struct isi_platform_data *data, + bool use_pck_as_mck); /* Touchscreen Controller */ struct at91_tsadcc_data { diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index f6ce936dba2..0118c333855 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,7 +25,6 @@ #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 #define ARCH_ID_AT91SAM9XE256 0x329a93a0 @@ -51,10 +50,6 @@ #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -/* PMC revision */ -#define ARCH_REVISION_CAP9_B 0x399 -#define ARCH_REVISION_CAP9_C 0x601 - /* RM9200 type */ #define ARCH_REVISON_9200_BGA (0 << 0) #define ARCH_REVISON_9200_PQFP (1 << 0) @@ -63,9 +58,6 @@ enum at91_soc_type { /* 920T */ AT91_SOC_RM9200, - /* CAP */ - AT91_SOC_CAP9, - /* SAM92xx */ AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, @@ -86,9 +78,6 @@ enum at91_soc_subtype { /* RM9200 */ AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, - /* CAP9 */ - AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, - /* SAM9260 */ AT91_SOC_SAM9XE, @@ -195,16 +184,6 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9x25() (0) #endif -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) -#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) -#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) -#else -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index e3fd225121c..eed465ab0dd 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -191,10 +191,15 @@ extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup); +extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup); extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); +extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div); extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); +extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on); +extern int __init_or_module at91_disable_schmitt_trig(unsigned pin); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); @@ -204,18 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -/*-------------------------------------------------------------------------*/ - -/* wrappers for "new style" GPIO calls. the old AT91-specific ones should - * eventually be removed (along with this errno.h inclusion), and the - * gpio request/free calls should probably be implemented. - */ - -#include <asm/errno.h> - -#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS) -#define irq_to_gpio(irq) (irq - NR_AIC_IRQS) - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 2d0e4e99856..e9e29a6c386 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -19,7 +19,7 @@ /* DBGU base */ /* rm9200, 9260/9g20, 9261/9g10, 9rl */ #define AT91_BASE_DBGU0 0xfffff200 -/* 9263, 9g45, cap9 */ +/* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 #if defined(CONFIG_ARCH_AT91RM9200) @@ -34,8 +34,8 @@ #include <mach/at91sam9rl.h> #elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9.h> +#elif defined(CONFIG_ARCH_AT91SAM9X5) +#include <mach/at91sam9x5.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> #else @@ -59,9 +59,10 @@ /* * On all at91 have the Advanced Interrupt Controller starts at address - * 0xfffff000 + * 0xfffff000 and the Power Management Controller starts at 0xfffffc00 */ #define AT91_AIC 0xfffff000 +#define AT91_PMC 0xfffffc00 /* * Peripheral identifiers/interrupts. diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 4ca09ef7ca2..4003001eca3 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -28,22 +28,4 @@ #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) -#ifndef __ASSEMBLY__ - -static inline unsigned int at91_sys_read(unsigned int reg_offset) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - return __raw_readl(addr + reg_offset); -} - -static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - __raw_writel(value, addr + reg_offset); -} - -#endif - #endif diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h deleted file mode 100644 index cbd64f3bcec..00000000000 --- a/arch/arm/mach-at91/include/mach/system.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/hardware.h> -#include <mach/at91_st.h> -#include <mach/at91_dbgu.h> -#include <mach/at91_pmc.h> - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -#ifdef AT91_PS - at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU); -#else - at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#endif -#ifndef CONFIG_CPU_ARM920T - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Post-RM9200 processors need this in conjunction with the above - * to save power when idle. - */ - cpu_do_idle(); -#endif -} - -#endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index be6b639ecd7..cfcfcbe3626 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -24,6 +24,12 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/types.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -34,22 +40,24 @@ #include <asm/mach/map.h> void __iomem *at91_aic_base; +static struct irq_domain *at91_aic_domain; +static struct device_node *at91_aic_np; static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ - at91_aic_write(AT91_AIC_IDCR, 1 << d->irq); + at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ - at91_aic_write(AT91_AIC_IECR, 1 << d->irq); + at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); } unsigned int at91_extern_irq; -#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq) +#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) static int at91_aic_set_type(struct irq_data *d, unsigned type) { @@ -63,13 +71,13 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQ_TYPE_LEVEL_LOW: - if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */ + if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else return -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: - if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */ + if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else return -EINVAL; @@ -78,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) return -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype); + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); return 0; } @@ -90,13 +98,13 @@ static u32 backups; static int at91_aic_set_wake(struct irq_data *d, unsigned value) { - if (unlikely(d->irq >= 32)) + if (unlikely(d->hwirq >= NR_AIC_IRQS)) return -EINVAL; if (value) - wakeups |= (1 << d->irq); + wakeups |= (1 << d->hwirq); else - wakeups &= ~(1 << d->irq); + wakeups &= ~(1 << d->hwirq); return 0; } @@ -127,46 +135,112 @@ static struct irq_chip at91_aic_chip = { .irq_set_wake = at91_aic_set_wake, }; +static void __init at91_aic_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC_DCR, 0); + + /* Disable and clear all interrupts initially */ + at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); + at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); +} + +#if defined(CONFIG_OF) +static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC_SVR(hw), virq); + + /* Active Low interrupt, without priority */ + at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops at91_aic_irq_ops = { + .map = at91_aic_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + at91_aic_base = of_iomap(node, 0); + at91_aic_np = node; + + at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + &at91_aic_irq_ops, NULL); + if (!at91_aic_domain) + panic("Unable to add AIC irq domain (DT)\n"); + + irq_set_default_host(at91_aic_domain); + + at91_aic_hw_init(NR_AIC_IRQS); + + return 0; +} +#endif + /* * Initialize the AIC interrupt controller. */ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) { unsigned int i; + int irq_base; at91_aic_base = ioremap(AT91_AIC, 512); - if (!at91_aic_base) - panic("Impossible to ioremap AT91_AIC\n"); + panic("Unable to ioremap AIC registers\n"); + + /* Add irq domain for AIC */ + irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + if (irq_base < 0) { + WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); + irq_base = 0; + } + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + irq_base, 0, + &irq_domain_simple_ops, NULL); + + if (!at91_aic_domain) + panic("Unable to add AIC irq domain\n"); + + irq_set_default_host(at91_aic_domain); /* * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ for (i = 0; i < NR_AIC_IRQS; i++) { - /* Put irq number in Source Vector Register: */ + /* Put hardware irq number in Source Vector Register: */ at91_aic_write(AT91_AIC_SVR(i), i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - - /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */ - if (i < 8) - at91_aic_write(AT91_AIC_EOICR, 0); } - /* - * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS - * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU - */ - at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS); - - /* No debugging in AIC: Debug (Protect) Control Register */ - at91_aic_write(AT91_AIC_DCR, 0); - - /* Disable and clear all interrupts initially */ - at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF); - at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); + at91_aic_hw_init(NR_AIC_IRQS); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1606379ac28..6c9d5e69ac2 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void) unsigned long scsr; int i; - scsr = at91_sys_read(AT91_PMC_SCSR); + scsr = at91_pmc_read(AT91_PMC_SCSR); /* USB must not be using PLLB */ if (cpu_is_at91rm9200()) { @@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void) pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); return 0; } - } else if (cpu_is_at91cap9()) { - if ((scsr & AT91CAP9_PMC_UHP) != 0) { - pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS @@ -165,7 +160,7 @@ static int at91_pm_verify_clocks(void) if ((scsr & (AT91_PMC_PCK0 << i)) == 0) continue; - css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; if (css != AT91_PMC_CSS_SLOW) { pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); return 0; @@ -193,23 +188,36 @@ int at91_suspend_entering_slow_clock(void) EXPORT_SYMBOL(at91_suspend_entering_slow_clock); -static void (*slow_clock)(void); +static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, + void __iomem *ramc1, int memctrl); #ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void); +extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, + void __iomem *ramc1, int memctrl); extern u32 at91_slow_clock_sz; #endif +void __iomem *at91_ramc_base[2]; + +void __init at91_ioremap_ramc(int id, u32 addr, u32 size) +{ + if (id < 0 || id > 1) { + pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id); + BUG(); + } + at91_ramc_base[id] = ioremap(addr, size); + if (!at91_ramc_base[id]) + panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr); +} static int at91_pm_enter(suspend_state_t state) { - u32 saved_lpr; at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", /* remember all the always-wake irqs */ - (at91_sys_read(AT91_PMC_PCSR) + (at91_pmc_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) | (at91_extern_irq)) @@ -234,11 +242,18 @@ static int at91_pm_enter(suspend_state_t state) * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { + int memctrl = AT91_MEMCTRL_SDRAMC; + + if (cpu_is_at91rm9200()) + memctrl = AT91_MEMCTRL_MC; + else if (cpu_is_at91sam9g45()) + memctrl = AT91_MEMCTRL_DDRSDR; #ifdef CONFIG_AT91_SLOW_CLOCK /* copy slow_clock handler to SRAM, and call it */ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); #endif - slow_clock(); + slow_clock(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], memctrl); break; } else { pr_info("AT91: PM - no slow clock mode enabled ...\n"); @@ -259,16 +274,7 @@ static int at91_pm_enter(suspend_state_t state) * For ARM 926 based chips, this requirement is weaker * as at91sam9 can access a RAM in self-refresh mode. */ - asm volatile ( "mov r0, #0\n\t" - "b 1f\n\t" - ".align 5\n\t" - "1: mcr p15, 0, r0, c7, c10, 4\n\t" - : /* no output */ - : /* no input */ - : "r0"); - saved_lpr = sdram_selfrefresh_enable(); - wait_for_interrupt_enable(); - sdram_selfrefresh_disable(saved_lpr); + at91_standby(); break; case PM_SUSPEND_ON: @@ -316,7 +322,7 @@ static int __init at91_pm_init(void) #ifdef CONFIG_ARCH_AT91RM9200 /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - at91_sys_write(AT91_SDRAMC_LPR, 0); + at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); #endif suspend_set_ops(&at91_pm_ops); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 7eb40d24242..89f56f3a802 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -1,5 +1,19 @@ +/* + * AT91 Power Management + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __ARCH_ARM_MACH_AT91_PM +#define __ARCH_ARM_MACH_AT91_PM + +#include <mach/at91_ramc.h> #ifdef CONFIG_ARCH_AT91RM9200 -#include <mach/at91rm9200_mc.h> +#include <mach/at91rm9200_sdramc.h> /* * The AT91RM9200 goes into self-refresh mode with this command, and will @@ -11,51 +25,37 @@ * still in self-refresh is "not recommended", but seems to work. */ -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91rm9200_standby(void) { - u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); - - at91_sys_write(AT91_SDRAMC_LPR, 0); - at91_sys_write(AT91_SDRAMC_SRR, 1); - return saved_lpr; + u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); + + asm volatile( + "b 1f\n\t" + ".align 5\n\t" + "1: mcr p15, 0, %0, c7, c10, 4\n\t" + " str %0, [%1, %2]\n\t" + " str %3, [%1, %4]\n\t" + " mcr p15, 0, %0, c7, c0, 4\n\t" + " str %5, [%1, %2]" + : + : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + "r" (1), "r" (AT91RM9200_SDRAMC_SRR), + "r" (lpr)); } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \ - : : "r" (0)) - -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91sam9_ddrsdr.h> - - -static inline u32 sdram_selfrefresh_enable(void) -{ - u32 saved_lpr, lpr; - - saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); - - lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); - return saved_lpr; -} - -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91rm9200_standby #elif defined(CONFIG_ARCH_AT91SAM9G45) -#include <mach/at91sam9_ddrsdr.h> /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ -static u32 saved_lpr1; - -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9g45_standby(void) { - /* Those tow values allow us to delay self-refresh activation + /* Those two values allow us to delay self-refresh activation * to the maximum. */ u32 lpr0, lpr1; - u32 saved_lpr0; + u32 saved_lpr0, saved_lpr1; saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; @@ -69,18 +69,15 @@ static inline u32 sdram_selfrefresh_enable(void) at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); - return saved_lpr0; + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#define sdram_selfrefresh_disable(saved_lpr0) \ - do { \ - at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ - at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ - } while (0) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9g45_standby #else -#include <mach/at91sam9_sdramc.h> #ifdef CONFIG_ARCH_AT91SAM9263 /* @@ -90,18 +87,23 @@ static inline u32 sdram_selfrefresh_enable(void) #warning Assuming EB1 SDRAM controller is *NOT* used #endif -static inline u32 sdram_selfrefresh_enable(void) +static inline void at91sam9_standby(void) { u32 saved_lpr, lpr; saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); - return saved_lpr; + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | + AT91_SDRAMC_LPCB_SELF_REFRESH); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr); } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) -#define wait_for_interrupt_enable() cpu_do_idle() +#define at91_standby at91sam9_standby + +#endif #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 92dfb846139..db5452123f1 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -15,15 +15,7 @@ #include <linux/linkage.h> #include <mach/hardware.h> #include <mach/at91_pmc.h> - -#if defined(CONFIG_ARCH_AT91RM9200) -#include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) -#include <mach/at91sam9_ddrsdr.h> -#else -#include <mach/at91sam9_sdramc.h> -#endif +#include <mach/at91_ramc.h> #ifdef CONFIG_ARCH_AT91SAM9263 @@ -47,17 +39,23 @@ #define PLLALOCK_TIMEOUT 1000 #define PLLBLOCK_TIMEOUT 1000 +pmc .req r0 +sdramc .req r1 +ramc1 .req r2 +memctrl .req r3 +tmp1 .req r4 +tmp2 .req r5 /* * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy - mov r4, #MCKRDY_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #MCKRDY_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_MCKRDY + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY beq 1b 2: .endm @@ -66,12 +64,12 @@ * Wait until master oscillator has stabilized. */ .macro wait_moscrdy - mov r4, #MOSCRDY_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #MOSCRDY_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_MOSCS + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS beq 1b 2: .endm @@ -80,12 +78,12 @@ * Wait until PLLA has locked. */ .macro wait_pllalock - mov r4, #PLLALOCK_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #PLLALOCK_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_LOCKA + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA beq 1b 2: .endm @@ -94,80 +92,98 @@ * Wait until PLLB has locked. */ .macro wait_pllblock - mov r4, #PLLBLOCK_TIMEOUT -1: sub r4, r4, #1 - cmp r4, #0 + mov tmp2, #PLLBLOCK_TIMEOUT +1: sub tmp2, tmp2, #1 + cmp tmp2, #0 beq 2f - ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)] - tst r3, #AT91_PMC_LOCKB + ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKB beq 1b 2: .endm .text +/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + */ ENTRY(at91_slow_clock) /* Save registers on stack */ - stmfd sp!, {r0 - r12, lr} + stmfd sp!, {r4 - r12, lr} /* * Register usage: - * R1 = Base address of AT91_PMC - * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R3 = temporary register + * R0 = Base address of AT91_PMC + * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R2 = Base address of second RAM Controller or 0 if not present + * R3 = Memory controller * R4 = temporary register - * R5 = Base address of second RAM Controller or 0 if not present + * R5 = temporary register */ - ldr r1, .at91_va_base_pmc - ldr r2, .at91_va_base_sdramc - ldr r5, .at91_va_base_ramc1 /* Drain write buffer */ - mov r0, #0 - mcr p15, 0, r0, c7, c10, 4 + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + cmp memctrl, #AT91_MEMCTRL_MC + bne ddr_sr_enable -#ifdef CONFIG_ARCH_AT91RM9200 + /* + * at91rm9200 Memory controller + */ /* Put SDRAM in self-refresh mode */ - mov r3, #1 - str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) + mov tmp1, #1 + str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] + b sdr_sr_done + + /* + * DDRSDR Memory controller + */ +ddr_sr_enable: + cmp memctrl, #AT91_MEMCTRL_DDRSDR + bne sdr_sr_enable /* prepare for DDRAM self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR] - str r3, .saved_sam9_lpr - bic r3, #AT91_DDRSDRC_LPCB - orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] + str tmp1, .saved_sam9_lpr + bic tmp1, #AT91_DDRSDRC_LPCB + orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* figure out if we use the second ram controller */ - cmp r5, #0 - ldrne r4, [r5, #AT91_DDRSDRC_LPR] - strne r4, .saved_sam9_lpr1 - bicne r4, #AT91_DDRSDRC_LPCB - orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH + cmp ramc1, #0 + ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + strne tmp2, .saved_sam9_lpr1 + bicne tmp2, #AT91_DDRSDRC_LPCB + orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* Enable DDRAM self-refresh mode */ - str r3, [r2, #AT91_DDRSDRC_LPR] - strne r4, [r5, #AT91_DDRSDRC_LPR] -#else + str tmp1, [sdramc, #AT91_DDRSDRC_LPR] + strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + + b sdr_sr_done + + /* + * SDRAMC Memory controller + */ +sdr_sr_enable: /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR] - str r3, .saved_sam9_lpr + ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] + str tmp1, .saved_sam9_lpr - bic r3, #AT91_SDRAMC_LPCB - orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR] -#endif + bic tmp1, #AT91_SDRAMC_LPCB + orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH + str tmp1, [sdramc, #AT91_SDRAMC_LPR] +sdr_sr_done: /* Save Master clock setting */ - ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] - str r3, .saved_mckr + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ - bic r3, r3, #AT91_PMC_CSS - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy @@ -177,61 +193,61 @@ ENTRY(at91_slow_clock) * * See AT91RM9200 errata #27 and #28 for details. */ - mov r3, #0 - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + mov tmp1, #0 + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy #endif /* Save PLLA setting and disable it */ - ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] - str r3, .saved_pllar + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar - mov r3, #AT91_PMC_PLLCOUNT - orr r3, r3, #(1 << 29) /* bit 29 always set */ - str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] /* Save PLLB setting and disable it */ - ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] - str r3, .saved_pllbr + ldr tmp1, [pmc, #AT91_CKGR_PLLBR] + str tmp1, .saved_pllbr - mov r3, #AT91_PMC_PLLCOUNT - str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + mov tmp1, #AT91_PMC_PLLCOUNT + str tmp1, [pmc, #AT91_CKGR_PLLBR] /* Turn off the main oscillator */ - ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] - bic r3, r3, #AT91_PMC_MOSCEN - str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + str tmp1, [pmc, #AT91_CKGR_MOR] /* Wait for interrupt */ - mcr p15, 0, r0, c7, c0, 4 + mcr p15, 0, tmp1, c7, c0, 4 /* Turn on the main oscillator */ - ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] - orr r3, r3, #AT91_PMC_MOSCEN - str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy /* Restore PLLB setting */ - ldr r3, .saved_pllbr - str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + ldr tmp1, .saved_pllbr + str tmp1, [pmc, #AT91_CKGR_PLLBR] - tst r3, #(AT91_PMC_MUL & 0xff0000) + tst tmp1, #(AT91_PMC_MUL & 0xff0000) bne 1f - tst r3, #(AT91_PMC_MUL & ~0xff0000) + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) beq 2f 1: wait_pllblock 2: /* Restore PLLA setting */ - ldr r3, .saved_pllar - str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] - tst r3, #(AT91_PMC_MUL & 0xff0000) + tst tmp1, #(AT91_PMC_MUL & 0xff0000) bne 3f - tst r3, #(AT91_PMC_MUL & ~0xff0000) + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) beq 4f 3: wait_pllalock @@ -244,11 +260,11 @@ ENTRY(at91_slow_clock) * * See AT91RM9200 errata #27 and #28 for details. */ - ldr r3, .saved_mckr - tst r3, #AT91_PMC_PRES + ldr tmp1, .saved_mckr + tst tmp1, #AT91_PMC_PRES beq 2f - and r3, r3, #AT91_PMC_PRES - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] + and tmp1, tmp1, #AT91_PMC_PRES + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy #endif @@ -256,32 +272,45 @@ ENTRY(at91_slow_clock) /* * Restore master clock setting */ -2: ldr r3, .saved_mckr - str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)] +2: ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy -#ifdef CONFIG_ARCH_AT91RM9200 - /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) + /* + * at91rm9200 Memory controller + * Do nothing - self-refresh is automatically disabled. + */ + cmp memctrl, #AT91_MEMCTRL_MC + beq ram_restored + + /* + * DDRSDR Memory controller + */ + cmp memctrl, #AT91_MEMCTRL_DDRSDR + bne sdr_en_restore /* Restore LPR on AT91 with DDRAM */ - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR] + ldr tmp1, .saved_sam9_lpr + str tmp1, [sdramc, #AT91_DDRSDRC_LPR] /* if we use the second ram controller */ - cmp r5, #0 - ldrne r4, .saved_sam9_lpr1 - strne r4, [r5, #AT91_DDRSDRC_LPR] + cmp ramc1, #0 + ldrne tmp2, .saved_sam9_lpr1 + strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] + + b ram_restored -#else + /* + * SDRAMC Memory controller + */ +sdr_en_restore: /* Restore LPR on AT91 with SDRAM */ - ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR] -#endif + ldr tmp1, .saved_sam9_lpr + str tmp1, [sdramc, #AT91_SDRAMC_LPR] +ram_restored: /* Restore registers, and return */ - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r4 - r12, pc} .saved_mckr: @@ -299,27 +328,5 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr1: .word 0 -.at91_va_base_pmc: - .word AT91_VA_BASE_SYS + AT91_PMC - -#ifdef CONFIG_ARCH_AT91RM9200 -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 -#else -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -#endif - -.at91_va_base_ramc1: -#if defined(CONFIG_ARCH_AT91SAM9G45) - .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 -#else - .word 0 -#endif - ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 69d3fc4c46f..372396c2ecb 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -86,20 +86,6 @@ static void __init soc_detect(u32 dbgu_base) socid = cidr & ~AT91_CIDR_VERSION; switch (socid) { - case ARCH_ID_AT91CAP9: { -#ifdef CONFIG_AT91_PMC_UNIT - u32 pmc_ver = at91_sys_read(AT91_PMC_VER); - - if (pmc_ver == ARCH_REVISION_CAP9_B) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; - else if (pmc_ver == ARCH_REVISION_CAP9_C) - at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; -#endif - at91_soc_initdata.type = AT91_SOC_CAP9; - at91_boot_soc = at91cap9_soc; - break; - } - case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; at91_boot_soc = at91rm9200_soc; @@ -200,7 +186,6 @@ static void __init soc_detect(u32 dbgu_base) static const char *soc_name[] = { [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_CAP9] = "at91cap9", [AT91_SOC_SAM9260] = "at91sam9260", [AT91_SOC_SAM9261] = "at91sam9261", [AT91_SOC_SAM9263] = "at91sam9263", @@ -221,8 +206,6 @@ EXPORT_SYMBOL(at91_get_soc_type); static const char *soc_subtype_name[] = { [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", - [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", [AT91_SOC_SAM9XE] = "at91sam9xe", [AT91_SOC_SAM9G45ES] = "at91sam9g45es", [AT91_SOC_SAM9M10] = "at91sam9m10", @@ -293,6 +276,15 @@ void __init at91_ioremap_rstc(u32 base_addr) panic("Impossible to ioremap at91_rstc_base\n"); } +void __iomem *at91_matrix_base; + +void __init at91_ioremap_matrix(u32 base_addr) +{ + at91_matrix_base = ioremap(base_addr, 512); + if (!at91_matrix_base) + panic("Impossible to ioremap at91_matrix_base\n"); +} + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 4588ae6f7ac..5db4aa45404 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -13,7 +13,6 @@ struct at91_init_soc { }; extern struct at91_init_soc at91_boot_soc; -extern struct at91_init_soc at91cap9_soc; extern struct at91_init_soc at91rm9200_soc; extern struct at91_init_soc at91sam9260_soc; extern struct at91_init_soc at91sam9261_soc; @@ -27,10 +26,6 @@ static inline int at91_soc_is_enabled(void) return at91_boot_soc.init != NULL; } -#if !defined(CONFIG_ARCH_AT91CAP9) -#define at91cap9_soc at91_boot_soc -#endif - #if !defined(CONFIG_ARCH_AT91RM9200) #define at91rm9200_soc at91_boot_soc #endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 6b67b7e8426..22e4e0a28ad 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -52,27 +52,8 @@ #include <mach/csp/chipcHw_inline.h> #include <mach/csp/tmrHw_reg.h> -#define AMBA_DEVICE(name, initname, base, plat, size) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = initname, \ - .platform_data = plat \ - }, \ - .res = { \ - .start = MM_ADDR_IO_##base, \ - .end = MM_ADDR_IO_##base + (size) - 1, \ - .flags = IORESOURCE_MEM \ - }, \ - .dma_mask = ~0, \ - .irq = { \ - IRQ_##base \ - } \ -} - - -AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); -AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); +static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL); +static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL); static struct clk pll1_clk = { .name = "PLL1", diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h deleted file mode 100644 index cb78250db64..00000000000 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index ab1711b9b4d..8736c1acc16 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd) { soft_restart(0); } + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + __asm__ __volatile__( + "mov r0, r0\n\ + mov r0, r0"); +} + +static int __init clps711x_idle_init(void) +{ + arm_pm_idle = clps711x_idle; + return 0; +} + +arch_initcall(clps711x_idle_init); diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h deleted file mode 100644 index 23d6ef8c84d..00000000000 --- a/arch/arm/mach-clps711x/include/mach/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-clps711x/include/mach/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/clps7111.h> - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h deleted file mode 100644 index 9e56b7dc133..00000000000 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright 2000 Deep Blue Solutions Ltd - * Copyright 2003 ARM Limited - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h deleted file mode 100644 index fcb7a015aba..00000000000 --- a/arch/arm/mach-davinci/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/common.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h deleted file mode 100644 index 3027954f616..00000000000 --- a/arch/arm/mach-dove/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 294aad07f7a..804c9122b7b 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = { &am79c961_device, }; +/* + * EBSA110 idling methodology: + * + * We can not execute the "wait for interrupt" instruction since that + * will stop our MCLK signal (which provides the clock for the glue + * logic, and therefore the timer interrupt). + * + * Instead, we spin, polling the IRQ_STAT register for the occurrence + * of any interrupt with core clock down to the memory clock. + */ +static void ebsa110_idle(void) +{ + const char *irq_stat = (char *)0xff000000; + + /* disable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); + + /* wait for an interrupt to occur */ + while (!*irq_stat); + + /* enable clock switching */ + asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); +} + static int __init ebsa110_init(void) { + arm_pm_idle = ebsa110_idle; return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h deleted file mode 100644 index 2e4af65edb6..00000000000 --- a/arch/arm/mach-ebsa110/include/mach/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#endif diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a679..903edb02fe4 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = { .set_mctrl = ep93xx_uart_set_mctrl, }; -static struct amba_device uart1_device = { - .dev = { - .init_name = "apb:uart1", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART1_PHYS_BASE, - .end = EP93XX_UART1_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART1, NO_IRQ }, - .periphid = 0x00041010, -}; - -static struct amba_device uart2_device = { - .dev = { - .init_name = "apb:uart2", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART2_PHYS_BASE, - .end = EP93XX_UART2_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART2, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, + { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); -static struct amba_device uart3_device = { - .dev = { - .init_name = "apb:uart3", - .platform_data = &ep93xx_uart_data, - }, - .res = { - .start = EP93XX_UART3_PHYS_BASE, - .end = EP93XX_UART3_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_EP93XX_UART3, NO_IRQ }, - .periphid = 0x00041010, -}; +static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, + { IRQ_EP93XX_UART2 }, &ep93xx_uart_data); +static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, + { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { { diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h deleted file mode 100644 index b5bec7cb9b5..00000000000 --- a/arch/arm/mach-ep93xx/include/mach/system.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/system.h - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 6de298c5d2d..93fa2d532e4 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = { }, }; -static void exynos_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init); int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); - - /* set idle function */ - pm_idle = exynos_idle; - return device_register(&exynos4_dev); } diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index b10fcd270f0..91370def4a7 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device exynos4_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma0_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0, + {IRQ_PDMA0}, &exynos4_pdma0_pdata); u8 pdma1_peri[] = { DMACH_PCM0_RX, @@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device exynos4_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &exynos4_pdma1_pdata, - }, - .res = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1, + {IRQ_PDMA1}, &exynos4_pdma1_pdata); static int __init exynos4_dma_init(void) { @@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void) dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask); - amba_device_register(&exynos4_device_pdma1, &iomem_resource); + amba_device_register(&exynos4_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h deleted file mode 100644 index 0063a6de3dc..00000000000 --- a/arch/arm/mach-exynos/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/system.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h deleted file mode 100644 index a174a5841bc..00000000000 --- a/arch/arm/mach-footbridge/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile index c5b24b95a76..7355c0bbcb5 100644 --- a/arch/arm/mach-gemini/Makefile +++ b/arch/arm/mach-gemini/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := irq.o mm.o time.o devices.o gpio.o +obj-y := irq.o mm.o time.o devices.o gpio.o idle.o # Board-specific support obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c new file mode 100644 index 00000000000..92bbd6bb600 --- /dev/null +++ b/arch/arm/mach-gemini/idle.c @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-gemini/idle.c + */ + +#include <linux/init.h> +#include <asm/system.h> +#include <asm/proc-fns.h> + +static void gemini_idle(void) +{ + /* + * Because of broken hardware we have to enable interrupts or the CPU + * will never wakeup... Acctualy it is not very good to enable + * interrupts first since scheduler can miss a tick, but there is + * no other way around this. Platforms that needs it for power saving + * should call enable_hlt() in init code, since by default it is + * disabled. + */ + local_irq_enable(); + cpu_do_idle(); +} + +static int __init gemini_idle_init(void) +{ + arm_pm_idle = gemini_idle; + return 0; +} + +arch_initcall(gemini_idle_init); diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h index 4d9c1f87247..a33b5a1f8ab 100644 --- a/arch/arm/mach-gemini/include/mach/system.h +++ b/arch/arm/mach-gemini/include/mach/system.h @@ -14,20 +14,6 @@ #include <mach/hardware.h> #include <mach/global_reg.h> -static inline void arch_idle(void) -{ - /* - * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable - * interrupts here since scheduler can miss a tick, but there is - * no other way around this. Platforms that needs it for power saving - * should call enable_hlt() in init code, since by default it is - * disabled. - */ - local_irq_enable(); - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { __raw_writel(RESET_GLOBAL | RESET_CPU1, diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index 9485a8fdf85..ca70e5fcc7a 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -73,8 +73,8 @@ void __init gemini_init_irq(void) unsigned int i, mode = 0, level = 0; /* - * Disable arch_idle() by default since it is buggy - * For more info see arch/arm/mach-gemini/include/mach/system.h + * Disable the idle handler by default since it is buggy + * For more info see arch/arm/mach-gemini/idle.c */ disable_hlt(); diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index f8a2f6bb548..e756d1ac00c 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd) { CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; } + +static void h720x__idle(void) +{ + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); +} + +static int __init h720x_idle_init(void) +{ + arm_pm_idle = h720x__idle; + return 0; +} + +arch_initcall(h720x_idle_init); diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h deleted file mode 100644 index 16ac46e239a..00000000000 --- a/arch/arm/mach-h720x/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-h720x/include/mach/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * arch/arm/mach-h720x/include/mach/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include <mach/hardware.h> - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - -#endif diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h deleted file mode 100644 index b1d8b5fbe37..00000000000 --- a/arch/arm/mach-highbank/include/mach/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright 2010-2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4defb97bbfc..85433b93004 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -376,6 +376,14 @@ config MACH_IMX27IPCAM Include support for IMX27 IPCAM platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX27_DT + bool "Support i.MX27 platforms from device tree" + select SOC_IMX27 + select USE_OF + help + Include support for Freescale i.MX27 based platforms + using the device tree for discovery + endif if ARCH_IMX_V6_V7 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 55db9c488f2..4ffeca7ee25 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o +obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o # i.MX31 based machines obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 6dfdbcc83af..3851d8a2787 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -38,5 +38,8 @@ zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 +dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb +dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ + imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ imx6q-sabrelite.dtb diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 88fe00a146e..01ae3a45bd7 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/clkdev.h> +#include <linux/of.h> #include <asm/div64.h> @@ -764,3 +765,20 @@ int __init mx27_clocks_init(unsigned long fref) return 0; } +#ifdef CONFIG_OF +int __init mx27_clocks_init_dt(void) +{ + struct device_node *np; + u32 fref = 26000000; /* default */ + + for_each_compatible_node(np, NULL, "fixed-clock") { + if (!of_device_is_compatible(np, "fsl,imx-osc26m")) + continue; + + if (!of_property_read_u32(np, "clock-frequency", &fref)) + break; + } + + return mx27_clocks_init(fref); +} +#endif diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c new file mode 100644 index 00000000000..861ceb8232d --- /dev/null +++ b/arch/arm/mach-imx/imx27-dt.c @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mx27.h> + +static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), + OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), + { /* sentinel */ } +}; + +static int __init imx27_avic_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + irq_domain_add_simple(np, 0); + return 0; +} + +static int __init imx27_gpio_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + + irq_domain_add_simple(np, gpio_irq_base); + + return 0; +} + +static const struct of_device_id imx27_irq_match[] __initconst = { + { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, }, + { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, }, + { /* sentinel */ } +}; + +static void __init imx27_dt_init(void) +{ + of_irq_init(imx27_irq_match); + + of_platform_populate(NULL, of_default_bus_match_table, + imx27_auxdata_lookup, NULL); +} + +static void __init imx27_timer_init(void) +{ + mx27_clocks_init_dt(); +} + +static struct sys_timer imx27_timer = { + .init = imx27_timer_init, +}; + +static const char *imx27_dt_board_compat[] __initdata = { + "fsl,imx27", + NULL +}; + +DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") + .map_io = mx27_map_io, + .init_early = imx27_init_early, + .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, + .timer = &imx27_timer, + .init_machine = imx27_dt_init, + .dt_compat = imx27_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 1e03ef42faa..5cca573964f 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -104,6 +104,7 @@ static struct sys_timer imx51_timer = { static const char *imx51_dt_board_compat[] __initdata = { "fsl,imx51-babbage", + "fsl,imx51", NULL }; diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index fd5be0f20fb..4172279b390 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -114,6 +114,7 @@ static const char *imx53_dt_board_compat[] __initdata = { "fsl,imx53-evk", "fsl,imx53-qsb", "fsl,imx53-smd", + "fsl,imx53", NULL }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 6075d4d62dd..379b1a9cd22 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -129,6 +129,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q", NULL, }; diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7..8404ee72555 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -34,31 +34,29 @@ static void imx3_idle(void) { unsigned long reg = 0; - if (!need_resched()) - __asm__ __volatile__( - /* disable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #0x00001000\n" - "bic %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - /* invalidate I cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c5, 0\n" - /* clear and invalidate D cache */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c14, 0\n" - /* WFI */ - "mov %0, #0\n" - "mcr p15, 0, %0, c7, c0, 4\n" - "nop\n" "nop\n" "nop\n" "nop\n" - "nop\n" "nop\n" "nop\n" - /* enable I and D cache */ - "mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #0x00001000\n" - "orr %0, %0, #0x00000004\n" - "mcr p15, 0, %0, c1, c0, 0\n" - : "=r" (reg)); - local_irq_enable(); + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); } static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, @@ -134,8 +132,8 @@ void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; + arm_pm_idle = imx3_idle; } void __init mx31_init_irq(void) @@ -197,7 +195,7 @@ void __init imx35_init_early(void) mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); - pm_idle = imx3_idle; + arm_pm_idle = imx3_idle; imx_ioremap = imx3_ioremap; } diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea381..49549a72dc7 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk; static void imx5_idle(void) { - if (!need_resched()) { - /* gpc clock is needed for SRPG */ - if (gpc_dvfs_clk == NULL) { - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - if (IS_ERR(gpc_dvfs_clk)) - goto err0; - } - clk_enable(gpc_dvfs_clk); - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - if (tzic_enable_wake()) - goto err1; - cpu_do_idle(); -err1: - clk_disable(gpc_dvfs_clk); + /* gpc clock is needed for SRPG */ + if (gpc_dvfs_clk == NULL) { + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + if (IS_ERR(gpc_dvfs_clk)) + return; } -err0: - local_irq_enable(); + clk_enable(gpc_dvfs_clk); + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + if (tzic_enable_wake() != 0) + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); } /* @@ -108,7 +102,7 @@ void __init imx51_init_early(void) mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); - pm_idle = imx5_idle; + arm_pm_idle = imx5_idle; } void __init imx53_init_early(void) diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index e455d2f855b..6fcffa7db97 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> #include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) @@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state) cscr &= 0xFFFFFFFC; __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); /* Executes WFI */ - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 019f0ab08f6..15b87f26ac9 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -35,67 +35,23 @@ static struct amba_pl010_data integrator_uart_data; -static struct amba_device rtc_device = { - .dev = { - .init_name = "mb:15", - }, - .res = { - .start = INTEGRATOR_RTC_BASE, - .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_RTCINT, NO_IRQ }, -}; +#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } +#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } +#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 } +#define KMI0_IRQ { IRQ_KMIINT0 } +#define KMI1_IRQ { IRQ_KMIINT1 } -static struct amba_device uart0_device = { - .dev = { - .init_name = "mb:16", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART0_BASE, - .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(rtc, "mb:15", 0, + INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); -static struct amba_device uart1_device = { - .dev = { - .init_name = "mb:17", - .platform_data = &integrator_uart_data, - }, - .res = { - .start = INTEGRATOR_UART1_BASE, - .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_UARTINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart0, "mb:16", 0, + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); -static struct amba_device kmi0_device = { - .dev = { - .init_name = "mb:18", - }, - .res = { - .start = KMI0_BASE, - .end = KMI0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT0, NO_IRQ }, -}; +static AMBA_APB_DEVICE(uart1, "mb:17", 0, + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); -static struct amba_device kmi1_device = { - .dev = { - .init_name = "mb:19", - }, - .res = { - .start = KMI1_BASE, - .end = KMI1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_KMIINT1, NO_IRQ }, -}; +static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL); static struct amba_device *amba_devs[] __initdata = { &rtc_device, diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 8cbb75a96bd..3e538da6cb1 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev) pc_base = dev->resource.start + idev->offset; - d = kzalloc(sizeof(struct amba_device), GFP_KERNEL); + d = amba_device_alloc(NULL, pc_base, SZ_4K); if (!d) continue; dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12); d->dev.parent = &dev->dev; - d->res.start = dev->resource.start + idev->offset; - d->res.end = d->res.start + SZ_4K - 1; - d->res.flags = IORESOURCE_MEM; d->irq[0] = dev->irq; d->irq[1] = dev->irq; d->periphid = idev->id; d->dev.platform_data = idev->platform_data; - ret = amba_device_register(d, &dev->resource); + ret = amba_device_add(d, &dev->resource); if (ret) { dev_err(&d->dev, "unable to register device: %d\n", ret); - kfree(d); + amba_device_put(d); } } diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h deleted file mode 100644 index 901514eba4a..00000000000 --- a/arch/arm/mach-integrator/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index a8b6aa6003f..be9ead4a3bc 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -static struct amba_device mmc_device = { - .dev = { - .init_name = "mb:1c", - .platform_data = &mmc_data, - }, - .res = { - .start = INTEGRATOR_CP_MMC_BASE, - .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, - .periphid = 0, -}; +#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } +#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } -static struct amba_device aaci_device = { - .dev = { - .init_name = "mb:1d", - }, - .res = { - .start = INTEGRATOR_CP_AACI_BASE, - .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_CP_AACIINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE, + INTEGRATOR_CP_MMC_IRQS, &mmc_data); + +static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE, + INTEGRATOR_CP_AACI_IRQS, NULL); /* @@ -425,21 +407,8 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static struct amba_device clcd_device = { - .dev = { - .init_name = "mb:c0", - .coherent_dma_mask = ~0, - .platform_data = &clcd_data, - }, - .res = { - .start = INTCP_PA_CLCD_BASE, - .end = INTCP_PA_CLCD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = { IRQ_CP_CLCDCINT, NO_IRQ }, - .periphid = 0, -}; +static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE, + { IRQ_CP_CLCDCINT }, &clcd_data); static struct amba_device *amba_devs[] __initdata = { &mmc_device, diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h deleted file mode 100644 index 1f31ed3f8ae..00000000000 --- a/arch/arm/mach-iop13xx/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop13xx/include/mach/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h deleted file mode 100644 index 4a88727bca9..00000000000 --- a/arch/arm/mach-iop32x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h deleted file mode 100644 index 4f98e765397..00000000000 --- a/arch/arm/mach-iop33x/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h deleted file mode 100644 index a7fb08b2b8e..00000000000 --- a/arch/arm/mach-ixp2000/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 0923bb905cc..7c1495e4fe7 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = { void __init ixp23xx_sys_init(void) { + /* by default, the idle code is disabled */ + disable_hlt(); + *IXP23XX_EXP_UNIT_FUSE |= 0xf; platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); } diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h deleted file mode 100644 index 277dda7334b..00000000000 --- a/arch/arm/mach-ixp23xx/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3841ab4146b..a6329a0a8ec 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void) { int i = 0; + /* + * ixp4xx does not implement the XScale PWRMODE register + * so it must not call cpu_do_idle(). + */ + disable_hlt(); + /* Route all sources to IRQ instead of FIQ */ *IXP4XX_ICLR = 0x0; diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h deleted file mode 100644 index 140a9bef446..00000000000 --- a/arch/arm/mach-ixp4xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -static inline void arch_idle(void) -{ - /* ixp4xx does not implement the XScale PWRMODE register, - * so it must not call cpu_do_idle() here. - */ -#if 0 - cpu_do_idle(); -#endif -} diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h deleted file mode 100644 index 5fddde002b5..00000000000 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h deleted file mode 100644 index 59fe992395b..00000000000 --- a/arch/arm/mach-ks8695/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h index 2667f52e3b0..9e3b90df32e 100644 --- a/arch/arm/mach-lpc32xx/include/mach/irqs.h +++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h @@ -61,7 +61,7 @@ */ #define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1) #define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2) -#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4) +#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4) #define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6) #define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7) #define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8) diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h deleted file mode 100644 index bf176c99152..00000000000 --- a/arch/arm/mach-lpc32xx/include/mach/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/system.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 4eae566dfdc..c74de01ab5b 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = { .event_group = &lpc32xx_event_pin_regs, .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT, }, + [IRQ_LPC32XX_GPI_28] = { + .event_group = &lpc32xx_event_pin_regs, + .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT, + }, [IRQ_LPC32XX_GPIO_00] = { .event_group = &lpc32xx_event_int_regs, .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT, @@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state) if (state) eventreg |= lpc32xx_events[d->irq].mask; - else + else { eventreg &= ~lpc32xx_events[d->irq].mask; + /* + * When disabling the wakeup, clear the latched + * event + */ + __raw_writel(lpc32xx_events[d->irq].mask, + lpc32xx_events[d->irq]. + event_group->rawstat_reg); + } + __raw_writel(eventreg, lpc32xx_events[d->irq].event_group->enab_reg); @@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void) /* Setup SIC1 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE)); + __raw_writel(SIC1_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE)); /* Setup SIC2 */ __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); - __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE)); + __raw_writel(SIC2_ATR_DEFAULT, + LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE)); /* Configure supported IRQ's */ for (i = 0; i < NR_IRQS; i++) { diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bfee5b45510..5d51c102c25 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = { .remove = lpc32xx_clcd_remove, }; -static struct amba_device lpc32xx_clcd_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:clcd", - .platform_data = &lpc32xx_clcd_data, - }, - .res = { - .start = LPC32XX_LCD_BASE, - .end = (LPC32XX_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_LCD, NO_IRQ}, -}; +static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0, + LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data); /* * AMBA SSP (SPI) @@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = { .enable_dma = 0, }; -static struct amba_device lpc32xx_ssp0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "dev:ssp0", - .platform_data = &lpc32xx_ssp0_data, - }, - .res = { - .start = LPC32XX_SSP0_BASE, - .end = (LPC32XX_SSP0_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - .dma_mask = ~0, - .irq = {IRQ_LPC32XX_SSP0, NO_IRQ}, -}; +static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0, + LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data); /* AT25 driver registration */ static int __init phy3250_spi_board_register(void) diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 429cfdbb2b3..f2735281616 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -88,6 +88,7 @@ struct uartinit { char *uart_ck_name; u32 ck_mode_mask; void __iomem *pdiv_clk_reg; + resource_size_t mapbase; }; static struct uartinit uartinit_data[] __initdata = { @@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5), .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL, + .mapbase = LPC32XX_UART5_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT @@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3), .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL, + .mapbase = LPC32XX_UART3_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT @@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4), .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL, + .mapbase = LPC32XX_UART4_BASE, }, #endif #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT @@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = { .ck_mode_mask = LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6), .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL, + .mapbase = LPC32XX_UART6_BASE, }, #endif }; @@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void) /* pre-UART clock divider set to 1 */ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg); + + /* + * Force a flush of the RX FIFOs to work around a + * HW bug + */ + puart = uartinit_data[i].mapbase; + __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); + __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart)); + j = LPC32XX_SUART_FIFO_SIZE; + while (j--) + tmp = __raw_readl( + LPC32XX_UART_DLL_FIFO(puart)); + __raw_writel(0, LPC32XX_UART_IIR_FCR(puart)); } /* This needs to be done after all UART clocks are setup */ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE); - for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) { + for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { /* Force a flush of the RX FIFOs to work around a HW bug */ puart = serial_std_platform_data[i].mapbase; __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart)); diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 323d4c9e9f4..5a90b9a3ab6 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -2,6 +2,16 @@ if ARCH_MMP menu "Marvell PXA168/910/MMP2 Implmentations" +config MACH_MMP_DT + bool "Support MMP2 platforms from device tree" + select CPU_PXA168 + select CPU_PXA910 + select USE_OF + help + Include support for Marvell MMP2 based platforms using + the device tree. Needn't select any other machine while + MACH_MMP_DT is enabled. + config MACH_ASPENITE bool "Marvell's PXA168 Aspenite Development Board" select CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index ba254a71691..4fc0ff5dc96 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o +obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o obj-$(CONFIG_MACH_GPLUGD) += gplugd.o diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb7606012..3588a558415 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -17,7 +17,6 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h deleted file mode 100644 index 1d001eab81e..00000000000 --- a/arch/arm/mach-mmp/include/mach/system.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_SYSTEM_H -#define __ASM_MACH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} -#endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c new file mode 100644 index 00000000000..67075395e40 --- /dev/null +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -0,0 +1,75 @@ +/* + * linux/arch/arm/mach-mmp/mmp-dt.c + * + * Copyright (C) 2012 Marvell Technology Group Ltd. + * Author: Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <mach/irqs.h> + +#include "common.h" + +extern struct sys_timer pxa168_timer; +extern void __init icu_init_irq(void); + +static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), + OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), + OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), + {} +}; + +static int __init mmp_intc_add_irq_domain(struct device_node *np, + struct device_node *parent) +{ + irq_domain_add_simple(np, 0); + return 0; +} + +static int __init mmp_gpio_add_irq_domain(struct device_node *np, + struct device_node *parent) +{ + irq_domain_add_simple(np, IRQ_GPIO_START); + return 0; +} + +static const struct of_device_id mmp_irq_match[] __initconst = { + { .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, }, + { .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, }, + {} +}; + +static void __init mmp_dt_init(void) +{ + + of_irq_init(mmp_irq_match); + + of_platform_populate(NULL, of_default_bus_match_table, + mmp_auxdata_lookup, NULL); +} + +static const char *pxa168_dt_board_compat[] __initdata = { + "mrvl,pxa168-aspenite", + NULL, +}; + +DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") + .map_io = mmp_map_io, + .init_irq = icu_init_irq, + .timer = &pxa168_timer, + .init_machine = mmp_dt_init, + .dt_compat = pxa168_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 7bc17eaa12e..e3d3533a5a3 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -24,7 +24,6 @@ #include <mach/dma.h> #include <mach/devices.h> #include <mach/mfp.h> -#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <mach/pxa168.h> @@ -65,6 +64,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); +static APBC_CLK(rtc, PXA168_RTC, 8, 32768); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); @@ -93,6 +93,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"), + INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; static int __init pxa168_init(void) diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 8e3b5af04a5..bc97170125b 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S deleted file mode 100644 index 6a94f052713..00000000000 --- a/arch/arm/mach-msm/idle.S +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/mach-msm/include/mach/idle.S - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - -ENTRY(arch_idle) -#ifdef CONFIG_MSM7X00A_IDLE - mrc p15, 0, r1, c1, c0, 0 /* read current CR */ - bic r0, r1, #(1 << 2) /* clear dcache bit */ - bic r0, r0, #(1 << 12) /* clear icache bit */ - mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ - - mov r0, #0 /* prepare wfi value */ - mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ - mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ - mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ - - mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ -#endif - mov pc, lr diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c new file mode 100644 index 00000000000..0c9e13c6574 --- /dev/null +++ b/arch/arm/mach-msm/idle.c @@ -0,0 +1,49 @@ +/* arch/arm/mach-msm/idle.c + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <asm/system.h> + +static void msm_idle(void) +{ +#ifdef CONFIG_MSM7X00A_IDLE + asm volatile ( + + "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" + "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" + "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" + "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" + + "mov r0, #0 /* prepare wfi value */ \n\t" + "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" + "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" + "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" + + "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" + + : : : "r0","r1" ); +#endif +} + +static int __init msm_idle_init(void) +{ + arm_pm_idle = msm_idle; + return 0; +} + +arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h index 311db2b35da..f5fb2ec87ff 100644 --- a/arch/arm/mach-msm/include/mach/system.h +++ b/arch/arm/mach-msm/include/mach/system.h @@ -12,7 +12,6 @@ * GNU General Public License for more details. * */ -void arch_idle(void); /* low level hardware reset hook -- for example, hitting the * PSHOLD line on the PMIC to hard reset the system diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h deleted file mode 100644 index 8c3a5387cec..00000000000 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c..01faffec306 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -77,16 +77,18 @@ err: int __init mxs_add_amba_device(const struct amba_device *dev) { - struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + struct amba_device *adev = amba_device_alloc(dev->dev.init_name, + dev->res.start, resource_size(&dev->res)); if (!adev) { pr_err("%s: failed to allocate memory", __func__); return -ENOMEM; } - *adev = *dev; + adev->irq[0] = dev->irq[0]; + adev->irq[1] = dev->irq[1]; - return amba_device_register(adev, &iomem_resource); + return amba_device_add(adev, &iomem_resource); } struct device mxs_apbh_bus = { diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c index a559db09b49..a5479f76604 100644 --- a/arch/arm/mach-mxs/devices/amba-duart.c +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = { \ .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ .flags = IORESOURCE_MEM, \ }, \ - .irq = {soc ## _INT_DUART, NO_IRQ}, \ + .irq = {soc ## _INT_DUART}, \ } #ifdef CONFIG_SOC_IMX23 diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h deleted file mode 100644 index e7ad1bb2942..00000000000 --- a/arch/arm/mach-mxs/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_MXS_SYSTEM_H__ -#define __MACH_MXS_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __MACH_MXS_SYSTEM_H__ */ diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c index fb042da29bd..a9b4bbcdafb 100644 --- a/arch/arm/mach-mxs/pm.c +++ b/arch/arm/mach-mxs/pm.c @@ -15,13 +15,12 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/system.h> static int mxs_suspend_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: - arch_idle(); + cpu_do_idle(); break; default: diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index b9913234bbf..2cdf6ef69be 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -92,18 +92,7 @@ void clk_put(struct clk *clk) { } -static struct amba_device fb_device = { - .dev = { - .init_name = "fb", - .coherent_dma_mask = ~0, - }, - .res = { - .start = 0x00104000, - .end = 0x00104fff, - .flags = IORESOURCE_MEM, - }, - .irq = { NETX_IRQ_LCD, NO_IRQ }, -}; +static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) { diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h deleted file mode 100644 index b38fa36d58c..00000000000 --- a/arch/arm/mach-netx/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/system.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif - diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 7c878bf0034..f6f74adbe8c 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void) #endif } -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE, + { IRQ_UART0 }, NULL); -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; +static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE, + { IRQ_UART1 }, NULL); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 65df7b4fdd3..27f43a46985 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = { GPIO_DEVICE(3), }; -static struct amba_device cpu8815_amba_rng = { - .dev = { - .init_name = "rng", - }, - __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), -}; +static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL); static struct platform_device *platform_devs[] __initdata = { cpu8815_platform_gpio + 0, @@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = { }; static struct amba_device *amba_devs[] __initdata = { - &cpu8815_amba_rng + &cpu8815_amba_rng_device }; static int __init cpu8815_init(void) diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h deleted file mode 100644 index 25e198b8976..00000000000 --- a/arch/arm/mach-nomadik/include/mach/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * mach-nomadik/include/mach/system.h - * - * Copyright (C) 2008 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 309369ea697..be2002f42de 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -416,13 +416,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { omap1_usb_init(&innovator1510_usb_config); - innovator_config[1].data = &innovator1510_lcd_config; + innovator_config[0].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { omap1_usb_init(&h2_usb_config); - innovator_config[1].data = &innovator1610_lcd_config; + innovator_config[0].data = &innovator1610_lcd_config; } #endif omap_board_config = innovator_config; diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h deleted file mode 100644 index a6c1b3a16df..00000000000 --- a/arch/arm/mach-omap1/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 89ea20ca0cc..0c2c3669d59 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -42,9 +42,9 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/atomic.h> #include <asm/irq.h> -#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -108,13 +108,7 @@ void omap1_pm_idle(void) __u32 use_idlect1 = arm_idlect1_mask; int do_sleep = 0; - local_irq_disable(); local_fiq_disable(); - if (need_resched()) { - local_fiq_enable(); - local_irq_enable(); - return; - } #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle @@ -157,14 +151,12 @@ void omap1_pm_idle(void) omap_writel(saved_idlect1, ARM_IDLECT1); local_fiq_enable(); - local_irq_enable(); return; } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); local_fiq_enable(); - local_irq_enable(); } /* @@ -583,8 +575,6 @@ static void omap_pm_init_proc(void) #endif /* DEBUG && CONFIG_PROC_FS */ -static void (*saved_idle)(void) = NULL; - /* * omap_pm_prepare - Do preliminary suspend work. * @@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL; static int omap_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ - saved_idle = pm_idle; - pm_idle = NULL; + disable_hlt(); return 0; } @@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state) static void omap_pm_finish(void) { - pm_idle = saved_idle; + enable_hlt(); } @@ -687,7 +676,7 @@ static int __init omap_pm_init(void) return -ENODEV; } - pm_idle = omap1_pm_idle; + arm_pm_idle = omap1_pm_idle; if (cpu_is_omap7xx()) setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 72ce50ecf32..3fdfaeb4ce2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -363,8 +363,8 @@ config OMAP3_SDRC_AC_TIMING going on could result in system crashes; config OMAP4_ERRATA_I688 - bool "OMAP4 errata: Async Bridge Corruption (BROKEN)" - depends on ARCH_OMAP4 && BROKEN + bool "OMAP4 errata: Async Bridge Corruption" + depends on ARCH_OMAP4 select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 42a4d11fad2..67226271760 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; +#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); +#else + pr_warn("MMC: notify cover event not available\n"); +#endif } static int n8x0_mmc_late_init(struct device *dev) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bead149..c877236a844 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1; platform_device_register(&leds_gpio); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index dd8c9906b1a..99604d36430 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -132,6 +132,7 @@ void omap3_map_io(void); void am33xx_map_io(void); void omap4_map_io(void); void ti81xx_map_io(void); +void omap_barriers_init(void); /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index cfdbb86bc84..72e018b9b26 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct timespec ts_preidle, ts_postidle, ts_idle; u32 cpu1_state; int idle_time; - int new_state_idx; int cpu_id = smp_processor_id(); /* Used to keep track of the total time in idle */ @@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev, */ cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { - new_state_idx = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]); + index = drv->safe_state_index; + cx = cpuidle_get_statedata(&dev->states_usage[index]); } if (index > 0) diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index 9c442e290cc..ce91aad4cda 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin"); #define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000) #define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000) -static struct amba_device omap3_etb_device = { - .dev = { - .init_name = "etb", - }, - .res = { - .start = ETB_BASE, - .end = ETB_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x000bb907, -}; - -static struct amba_device omap3_etm_device = { - .dev = { - .init_name = "etm", - }, - .res = { - .start = ETM_BASE, - .end = ETM_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .periphid = 0x102bb921, -}; +static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL); +static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL); static int __init emu_init(void) { @@ -66,4 +45,3 @@ static int __init emu_init(void) } subsys_initcall(emu_init); - diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 997033129d2..bbb870c04a5 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <plat/board.h> #include <plat/gpmc.h> @@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; +static struct regulator_consumer_supply gpmc_smsc911x_supply[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + +/* Generic regulator definition to satisfy smsc911x */ +static struct regulator_init_data gpmc_smsc911x_reg_init_data = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply), + .consumer_supplies = gpmc_smsc911x_supply, +}; + +static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = { + .supply_name = "gpmc_smsc911x", + .microvolts = 3300000, + .gpio = -EINVAL, + .startup_delay = 0, + .enable_high = 0, + .enabled_at_boot = 1, + .init_data = &gpmc_smsc911x_reg_init_data, +}; + +/* + * Platform device id of 42 is a temporary fix to avoid conflicts + * with other reg-fixed-voltage devices. The real fix should + * involve the driver core providing a way of dynamically + * assigning a unique id on registration for platform devices + * in the same name space. + */ +static struct platform_device gpmc_smsc911x_regulator = { + .name = "reg-fixed-voltage", + .id = 42, + .dev = { + .platform_data = &gpmc_smsc911x_fixed_reg_data, + }, +}; + /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) gpmc_cfg = board_data; + ret = platform_device_register(&gpmc_smsc911x_regulator); + if (ret < 0) { + pr_err("Unable to register smsc911x regulators: %d\n", ret); + return; + } + if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { pr_err("Failed to request GPMC mem region\n"); return; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b40c2889529..19dd1657245 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } +static int omap_hsmmc_done; #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) @@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) { u32 reg; + if (omap_hsmmc_done) + return; + + omap_hsmmc_done = 1; + if (!cpu_is_omap44xx()) { if (cpu_is_omap2430()) { control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h deleted file mode 100644 index d488721ab90..00000000000 --- a/arch/arm/mach-omap2/include/mach/system.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/system.h - */ - -#include <plat/system.h> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index eb50c29fb64..fb11b44fbde 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); + omap_barriers_init(); } #endif diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 609ea2ded7e..2cc1aa004b9 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_iva_priv, }; +#endif -struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; +#ifdef CONFIG_ARCH_OMAP2 +struct omap_mbox *omap2_mboxes[] = { + &mbox_dsp_info, +#ifdef CONFIG_SOC_OMAP2420 + &mbox_iva_info, +#endif + NULL +}; #endif #if defined(CONFIG_ARCH_OMAP4) @@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void) platform_driver_unregister(&omap2_mbox_driver); } -module_init(omap2_mbox_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap2_mbox_init); module_exit(omap2_mbox_exit); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fb8bc9fa43b..611a0e3d54c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init +static int omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 40a8fbc07e4..ebc59509131 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -24,6 +24,7 @@ #include <plat/irqs.h> #include <plat/sram.h> +#include <plat/omap-secure.h> #include <mach/hardware.h> #include <mach/omap-wakeupgen.h> @@ -43,6 +44,9 @@ static void __iomem *sar_ram_base; void __iomem *dram_sync, *sram_sync; +static phys_addr_t paddr; +static u32 size; + void omap_bus_sync(void) { if (dram_sync && sram_sync) { @@ -52,18 +56,20 @@ void omap_bus_sync(void) } } -static int __init omap_barriers_init(void) +/* Steal one page physical memory for barrier implementation */ +int __init omap_barrier_reserve_memblock(void) { - struct map_desc dram_io_desc[1]; - phys_addr_t paddr; - u32 size; - - if (!cpu_is_omap44xx()) - return -ENODEV; size = ALIGN(PAGE_SIZE, SZ_1M); paddr = arm_memblock_steal(size, SZ_1M); + return 0; +} + +void __init omap_barriers_init(void) +{ + struct map_desc dram_io_desc[1]; + dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; @@ -75,9 +81,10 @@ static int __init omap_barriers_init(void) pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n", (long long) paddr, dram_io_desc[0].virtual); - return 0; } -core_initcall(omap_barriers_init); +#else +void __init omap_barriers_init(void) +{} #endif void __init gic_init_irq(void) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index ad4f6939416..44551edd835 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, freq = clk->rate; clk_put(clk); + rcu_read_lock(); opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { + rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); + rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 23de98d0384..a4eb5c28043 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -226,7 +226,6 @@ static int omap2_can_sleep(void) static void omap2_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); if (!omap2_can_sleep()) { @@ -243,7 +242,6 @@ static void omap2_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -462,7 +460,7 @@ static int __init omap2_pm_init(void) } suspend_set_ops(&omap_pm_ops); - pm_idle = omap2_pm_idle; + arm_pm_idle = omap2_pm_idle; return 0; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fc698757892..b77df735fa6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -418,10 +418,9 @@ void omap_sram_idle(void) static void omap3_pm_idle(void) { - local_irq_disable(); local_fiq_disable(); - if (omap_irq_pending() || need_resched()) + if (omap_irq_pending()) goto out; trace_power_start(POWER_CSTATE, 1, smp_processor_id()); @@ -434,7 +433,6 @@ static void omap3_pm_idle(void) out: local_fiq_enable(); - local_irq_enable(); } #ifdef CONFIG_SUSPEND @@ -848,7 +846,7 @@ static int __init omap3_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - pm_idle = omap3_pm_idle; + arm_pm_idle = omap3_pm_idle; omap3_idle_init(); /* diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index c264ef7219c..c840689df24 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) * omap_default_idle - OMAP4 default ilde routine.' * * Implements OMAP4 memory, IO ordering requirements which can't be addressed - * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and * by secondary CPU with CONFIG_CPUIDLE. */ static void omap_default_idle(void) { - local_irq_disable(); local_fiq_disable(); omap_do_wfi(); local_fiq_enable(); - local_irq_enable(); } /** @@ -255,8 +253,8 @@ static int __init omap4_pm_init(void) suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ - /* Overwrite the default arch_idle() */ - pm_idle = omap_default_idle; + /* Overwrite the default cpu_do_idle() */ + arm_pm_idle = omap_default_idle; omap4_idle_init(); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 860118ab43e..873b51d494e 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,7 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include <mach/system.h> #include <plat/common.h> #include <plat/prcm.h> #include <plat/irqs.h> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 771dc781b74..f51348dafaf 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { struct omap_hwmod *oh[2]; - struct omap_device *od; + struct platform_device *pdev; int bus_id = -1; int i; @@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) return; } - od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, + pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2, (void *)&usbhs_data, sizeof(usbhs_data), omap_uhhtll_latency, ARRAY_SIZE(omap_uhhtll_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s,%s\n", USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME); return; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index c005e2f5e38..57db2038b23 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP if (cpu_is_omap3630()) { omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; @@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void) omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } +#endif if (cpu_is_omap3517() || cpu_is_omap3505()) voltdms = voltagedomains_am35xx; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 4e11d022595..c3115f6853d 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ +#ifdef CONFIG_PM_OPP omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; +#endif for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h deleted file mode 100644 index 825a2650cef..00000000000 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/system.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h deleted file mode 100644 index 1a5d8cb57df..00000000000 --- a/arch/arm/mach-picoxcell/include/mach/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching and wait for interrupt - * tricks. - */ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h deleted file mode 100644 index 60cfe718809..00000000000 --- a/arch/arm/mach-pnx4008/include/mach/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * arch/arm/mach-pnx4008/include/mach/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h deleted file mode 100644 index 2c7d2a9d0c9..00000000000 --- a/arch/arm/mach-prima2/include/mach/system.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-prima2/include/mach/system.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fb9b62dcf4c..208eef1c048 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -45,6 +45,7 @@ #include <mach/hx4700.h> #include <mach/irda.h> +#include <sound/ak4641.h> #include <video/platform_lcd.h> #include <video/w100fb.h> @@ -765,6 +766,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = { }; /* + * Asahi Kasei AK4641 on I2C + */ + +static struct ak4641_platform_data ak4641_info = { + .gpio_power = GPIO27_HX4700_CODEC_ON, + .gpio_npdn = GPIO109_HX4700_CODEC_nPDN, +}; + +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("ak4641", 0x12), + .platform_data = &ak4641_info, + }, +}; + +static struct platform_device audio = { + .name = "hx4700-audio", + .id = -1, +}; + + +/* * PCMCIA */ @@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = { &gpio_vbus, &power_supply, &strataflash, + &audio, &pcmcia, }; @@ -827,6 +851,7 @@ static void __init hx4700_init(void) pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h deleted file mode 100644 index c5afacd3cc0..00000000000 --- a/arch/arm/mach-pxa/include/mach/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 91e4f6c0376..00d6eacab8e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,7 +25,6 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index aed6cbcf386..c1673b3441d 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> #include <asm/mach/map.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index febc809ed5a..5aded5e6148 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <linux/mfd/88pm860x.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 8d5168d253a..30989baf7f2 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = { #define MAXCTRL_SEL_SH 4 #define MAXCTRL_STR (1u << 7) +extern int max1111_read_channel(int); /* * Read MAX1111 ADC */ @@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel) if (machine_is_tosa()) return 0; - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 34cbdac5152..438f02fe122 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm) static unsigned long spitz_charger_wakeup(void) { unsigned long ret; - ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT) + ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT) << GPIO_bit(SPITZ_GPIO_KEY_INT)) - | (!gpio_get_value(SPITZ_GPIO_SYNC) - << GPIO_bit(SPITZ_GPIO_SYNC)); + | gpio_get_value(SPITZ_GPIO_SYNC)); return ret; } diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 735b57aaf2d..f8f2c0ac4c0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -28,21 +28,11 @@ #include <asm/setup.h> #include <asm/leds.h> -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = REALVIEW_##base##_BASE, \ - .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) struct machine_desc; diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 5c3c625e3e0..708f84156f2 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) #define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ -#define IRQ_PB1176_GPIO0 -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h deleted file mode 100644 index 471b671159c..00000000000 --- a/arch/arm/mach-realview/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 9578145f2df..157e1bc6e83 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } +#define GPIO2_IRQ { IRQ_EB_GPIO2 } +#define GPIO3_IRQ { IRQ_EB_GPIO3 } -#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_EB_AACI } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_EB_KMI0 } +#define KMI1_IRQ { IRQ_EB_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } +#define EB_SMC_IRQ { } +#define MPMC_IRQ { } +#define EB_CLCD_IRQ { IRQ_EB_CLCD } +#define DMAC_IRQ { IRQ_EB_DMA } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } +#define SCTL_IRQ { } +#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } +#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } +#define GPIO1_IRQ { IRQ_EB_GPIO1 } +#define EB_RTC_IRQ { IRQ_EB_RTC } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } +#define SCI_IRQ { IRQ_EB_SCI } +#define EB_UART0_IRQ { IRQ_EB_UART0 } +#define EB_UART1_IRQ { IRQ_EB_UART1 } +#define EB_UART2_IRQ { IRQ_EB_UART2 } +#define EB_UART3_IRQ { IRQ_EB_UART3 } +#define EB_SSP_IRQ { IRQ_EB_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); +AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index e4abe94fb11..b1d7cafa1a6 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = { /* * RealView PB1176 AMBA devices */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } +#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } +#define AACI_IRQ { IRQ_PB1176_AACI } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PB1176_KMI0 } +#define KMI1_IRQ { IRQ_PB1176_KMI1 } +#define PB1176_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } +#define SCTL_IRQ { } +#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } +#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } +#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } +#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } +#define SCI_IRQ { IRQ_PB1176_SCI } +#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } +#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } +#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } +#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); +AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); +APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart0_device, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 2147335f66f..ae7fe54f6eb 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB11MPCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } +#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } +#define AACI_IRQ { IRQ_TC11MP_AACI } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_TC11MP_KMI0 } +#define KMI1_IRQ { IRQ_TC11MP_KMI1 } +#define PB11MP_SMC_IRQ { } +#define MPMC_IRQ { } +#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } +#define DMAC_IRQ { IRQ_PB11MP_DMAC } +#define SCTL_IRQ { } +#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } +#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } +#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } +#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } +#define SCI_IRQ { IRQ_PB11MP_SCI } +#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } +#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } +#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } +#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } +#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 25b2e59296f..59650174e6e 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBA8Core AMBA devices */ -#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } +#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } +#define AACI_IRQ { IRQ_PBA8_AACI } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBA8_KMI0 } +#define KMI1_IRQ { IRQ_PBA8_KMI1 } +#define PBA8_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } +#define DMAC_IRQ { IRQ_PBA8_DMAC } +#define SCTL_IRQ { } +#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } +#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } +#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } +#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } +#define SCI_IRQ { IRQ_PBA8_SCI } +#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } +#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } +#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } +#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } +#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index ac715645b86..1cd9956f587 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PBXCore AMBA devices */ -#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } +#define GPIO2_IRQ { IRQ_PBX_GPIO2 } +#define GPIO3_IRQ { IRQ_PBX_GPIO3 } +#define AACI_IRQ { IRQ_PBX_AACI } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } +#define KMI0_IRQ { IRQ_PBX_KMI0 } +#define KMI1_IRQ { IRQ_PBX_KMI1 } +#define PBX_SMC_IRQ { } +#define MPMC_IRQ { } +#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } +#define DMAC_IRQ { IRQ_PBX_DMAC } +#define SCTL_IRQ { } +#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } +#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } +#define GPIO1_IRQ { IRQ_PBX_GPIO1 } +#define PBX_RTC_IRQ { IRQ_PBX_RTC } +#define SCI_IRQ { IRQ_PBX_SCI } +#define PBX_UART0_IRQ { IRQ_PBX_UART0 } +#define PBX_UART1_IRQ { IRQ_PBX_UART1 } +#define PBX_UART2_IRQ { IRQ_PBX_UART2 } +#define PBX_UART3_IRQ { IRQ_PBX_UART3 } +#define PBX_SSP_IRQ { IRQ_PBX_SSP } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); +APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); +APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); +APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); +AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); +APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); +APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); +APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); +APB_DEVICE(sci0, "dev:sci0", SCI, NULL); +APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); +APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); +APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); +APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); +AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h deleted file mode 100644 index 359bab94b6a..00000000000 --- a/arch/arm/mach-rpc/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h deleted file mode 100644 index 5e215c1a5c8..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/io.h> -#include <mach/hardware.h> - -#include <mach/map.h> -#include <mach/idle.h> - -#include <mach/regs-clock.h> - -void (*s3c24xx_idle)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index aff6e85a97c..c6eac987109 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -32,8 +32,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> - #include <plat/cpu-freq.h> #include <mach/regs-clock.h> @@ -164,7 +162,7 @@ void __init s3c2412_map_io(void) /* set our idle function */ - s3c24xx_idle = s3c2412_idle; + arm_pm_idle = s3c2412_idle; /* register our io-tables */ diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 5287d2808d3..08bb0355159 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -44,7 +44,6 @@ #include <asm/proc-fns.h> #include <asm/irq.h> -#include <mach/idle.h> #include <mach/regs-s3c2443-clock.h> #include <plat/gpio-core.h> @@ -88,8 +87,6 @@ int __init s3c2416_init(void) { printk(KERN_INFO "S3C2416: Initializing architecture\n"); - /* s3c24xx_idle = s3c2416_idle; */ - /* change WDT IRQ number */ s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h deleted file mode 100644 index 353ed4389ae..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/system.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - system implementation - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 52b89a37644..9143f8b1996 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -146,15 +146,12 @@ static void s5p64x0_idle(void) { unsigned long val; - if (!need_resched()) { - val = __raw_readl(S5P64X0_PWR_CFG); - val &= ~(0x3 << 5); - val |= (0x1 << 5); - __raw_writel(val, S5P64X0_PWR_CFG); + val = __raw_readl(S5P64X0_PWR_CFG); + val &= ~(0x3 << 5); + val |= (0x1 << 5); + __raw_writel(val, S5P64X0_PWR_CFG); - cpu_do_idle(); - } - local_irq_enable(); + cpu_do_idle(); } /* @@ -286,7 +283,7 @@ int __init s5p64x0_init(void) printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n"); /* set idle function */ - pm_idle = s5p64x0_idle; + arm_pm_idle = s5p64x0_idle; return device_register(&s5p64x0_dev); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index f820c074440..f7f68ad7791 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = { .peri_id = s5p6450_pdma_peri, }; -struct amba_device s5p64x0_device_pdma = { - .dev = { - .init_name = "dma-pl330", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .res = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA, + {IRQ_DMA0}, NULL); static int __init s5p64x0_dma_init(void) { if (soc_is_s5p6450()) { dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata; } else { dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask); - s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; + s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata; } - amba_device_register(&s5p64x0_device_pdma, &iomem_resource); + amba_device_register(&s5p64x0_pdma_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h deleted file mode 100644 index cf26e0954a2..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/system.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index c9095730a7f..ff71e2d467c 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = { } }; -static void s5pc100_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - /* * s5pc100_map_io * @@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init); int __init s5pc100_init(void) { printk(KERN_INFO "S5PC100: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pc100_idle; - return device_register(&s5pc100_dev); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index c841f4d313f..96b1ab3dcd4 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pc100_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma0_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0, + {IRQ_PDMA0}, &s5pc100_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pc100_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pc100_pdma1_pdata, - }, - .res = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1, + {IRQ_PDMA1}, &s5pc100_pdma1_pdata); static int __init s5pc100_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); - amba_device_register(&s5pc100_device_pdma1, &iomem_resource); + amba_device_register(&s5pc100_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h deleted file mode 100644 index afc96c29851..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/system.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - system implementation - * - * Based on mach-s3c6400/include/mach/system.h - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 9c1bcdcc12c..4c9e9027df9 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { } }; -static void s5pv210_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - void s5pv210_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init); int __init s5pv210_init(void) { printk(KERN_INFO "S5PV210: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5pv210_idle; - return device_register(&s5pv210_dev); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index a6113e0267f..f6885d247d1 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = { .peri_id = pdma0_peri, }; -struct amba_device s5pv210_device_pdma0 = { - .dev = { - .init_name = "dma-pl330.0", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma0_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA0, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0, + {IRQ_PDMA0}, &s5pv210_pdma0_pdata); u8 pdma1_peri[] = { DMACH_UART0_RX, @@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = { .peri_id = pdma1_peri, }; -struct amba_device s5pv210_device_pdma1 = { - .dev = { - .init_name = "dma-pl330.1", - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv210_pdma1_pdata, - }, - .res = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_PDMA1, NO_IRQ}, - .periphid = 0x00041330, -}; +AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1, + {IRQ_PDMA1}, &s5pv210_pdma1_pdata); static int __init s5pv210_dma_init(void) { dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); - amba_device_register(&s5pv210_device_pdma1, &iomem_resource); + amba_device_register(&s5pv210_pdma1_device, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h deleted file mode 100644 index bf288ced860..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/system.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h deleted file mode 100644 index e17b208f76d..00000000000 --- a/arch/arm/mach-sa1100/include/mach/system.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/system.h - * - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a851c254ad6..6a2a7f2c255 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -149,10 +149,16 @@ static struct sys_timer shark_timer = { .init = shark_timer_init, }; +static void shark_init_early(void) +{ + disable_hlt(); +} + MACHINE_START(SHARK, "Shark") /* Maintainer: Alexander Schulz */ .atag_offset = 0x3000, .map_io = shark_map_io, + .init_early = shark_init_early, .init_irq = shark_init_irq, .timer = &shark_timer, .dma_zone_size = SZ_4M, diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h deleted file mode 100644 index 1b2f2c5050a..00000000000 --- a/arch/arm/mach-shark/include/mach/system.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-shark/include/mach/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75e..068b754bc34 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include <linux/serial_sci.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> @@ -37,7 +38,6 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> -#include <linux/dma-mapping.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { @@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f75..eeb4d966458 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb..c8e7ca23fc0 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8..a2813247b45 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> -#include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/dma-mapping.h> @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -208,6 +193,16 @@ */ /* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + +/* * FIXME !! * * gpio_no_direction @@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { @@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1423,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e1..7727cca6136 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a968..cad57578cee 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h index 956ac18ddbf..3bbcb3fa077 100644 --- a/arch/arm/mach-shmobile/include/mach/system.h +++ b/arch/arm/mach-shmobile/include/mach/system.h @@ -1,11 +1,6 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e..9857595eaa7 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c index 963532f2b2c..d14c9b04807 100644 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ b/arch/arm/mach-shmobile/pfc-r8a7779.c @@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = { FN_AUDATA3, 0, 0, 0 } }, { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, + 3, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { /* IP4_31_29 [3] */ FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6ac..336093f9210 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> +#include <mach/irqs.h> #include <mach/sh7372.h> #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 0d159d64a34..2d0d4212be4 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) /* enable cache coherency */ modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3) + if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, __io(WUPCR)); /* wake up */ else __raw_writel(1 << cpu, __io(SRESCR)); /* reset */ diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h deleted file mode 100644 index 92cee6335c9..00000000000 --- a/arch/arm/mach-spear3xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/system.h - * - * SPEAr3xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a5e46b4ade2..9da50e281e9 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = SPEAR300_GPIO1_INT_BASE, }; -struct amba_device spear300_gpio1_device = { - .dev = { - .init_name = "gpio1", - .platform_data = &gpio1_plat_data, - }, - .res = { - .start = SPEAR300_GPIO_BASE, - .end = SPEAR300_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, + {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); /* spear300 routines */ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 10af45da86a..b1733c37f20 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = { .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -struct amba_device spear3xx_gpio_device = { - .dev = { - .init_name = "gpio", - .platform_data = &gpio_plat_data, - }, - .res = { - .start = SPEAR3XX_ICM3_GPIO_BASE, - .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, + {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); /* uart device registration */ -struct amba_device spear3xx_uart_device = { - .dev = { - .init_name = "uart", - }, - .res = { - .start = SPEAR3XX_ICM1_UART_BASE, - .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, -}; +AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, + {SPEAR3XX_IRQ_UART}, NULL); /* Do spear3xx familiy common initialization part here */ void __init spear3xx_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h deleted file mode 100644 index 0b1d2be81cf..00000000000 --- a/arch/arm/mach-spear6xx/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/system.h - * - * SPEAr6xx Machine family specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_SYSTEM_H -#define __MACH_SYSTEM_H - -#include <plat/system.h> - -#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index e0f6628c8b2..b997b1b10ba 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -34,7 +34,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_0, NO_IRQ}, + .irq = {IRQ_UART_0}, }, { .dev = { .init_name = "uart1", @@ -44,7 +44,7 @@ struct amba_device uart_device[] = { .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART_1, NO_IRQ}, + .irq = {IRQ_UART_1}, } }; @@ -73,7 +73,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, + .irq = {IRQ_LOCAL_GPIO}, }, { .dev = { .init_name = "gpio1", @@ -84,7 +84,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + .irq = {IRQ_BASIC_GPIO}, }, { .dev = { .init_name = "gpio2", @@ -95,7 +95,7 @@ struct amba_device gpio_device[] = { .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_APPL_GPIO, NO_IRQ}, + .irq = {IRQ_APPL_GPIO}, } }; diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index a2eb90169ae..2db20da1d58 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -27,7 +27,6 @@ #include <asm/hardware/gic.h> #include <mach/iomap.h> -#include <mach/system.h> #include "board.h" #include "clock.h" @@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) #ifdef CONFIG_ARCH_TEGRA_2x_SOC void __init tegra20_init_early(void) { + disable_hlt(); /* idle WFI usage needs to be confirmed */ + tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h deleted file mode 100644 index a312988bf6f..00000000000 --- a/arch/arm/mach-tegra/include/mach/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/system.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_SYSTEM_H -#define __MACH_TEGRA_SYSTEM_H - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700..b9865605da0 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = { #endif }; -static struct amba_device uart0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart0", /* Slow device at 0x3000 offset */ - .platform_data = &uart0_plat_data, - }, - .res = { - .start = U300_UART0_BASE, - .end = U300_UART0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART0, NO_IRQ }, -}; +/* Slow device at 0x3000 offset */ +static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE, + { IRQ_U300_UART0 }, &uart0_plat_data); /* The U335 have an additional UART1 on the APP CPU */ #ifdef CONFIG_MACH_U300_BS335 @@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = { #endif }; -static struct amba_device uart1_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "uart1", /* Fast device at 0x7000 offset */ - .platform_data = &uart1_plat_data, - }, - .res = { - .start = U300_UART1_BASE, - .end = U300_UART1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { IRQ_U300_UART1, NO_IRQ }, -}; +/* Fast device at 0x7000 offset */ +static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE, + { IRQ_U300_UART1 }, &uart1_plat_data); #endif -static struct amba_device pl172_device = { - .dev = { - .init_name = "pl172", /* AHB device at 0x4000 offset */ - .platform_data = NULL, - }, - .res = { - .start = U300_EMIF_CFG_BASE, - .end = U300_EMIF_CFG_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; +/* AHB device at 0x4000 offset */ +static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL); /* * Everything within this next ifdef deals with external devices connected to * the APP SPI bus. */ -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", /* Fast device at 0x6000 offset */ - }, - .res = { - .start = U300_SPI_BASE, - .end = U300_SPI_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_SPI, NO_IRQ }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x6000 offset */ +static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE, + { IRQ_U300_SPI }, NULL); -static struct amba_device mmcsd_device = { - .dev = { - .init_name = "mmci", /* Fast device at 0x1000 offset */ - .platform_data = NULL, /* Added later */ - }, - .res = { - .start = U300_MMCSD_BASE, - .end = U300_MMCSD_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }, - /* - * This device has a DMA channel but the Linux driver does not use - * it currently. - */ -}; +/* Fast device at 0x1000 offset */ +#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 } + +static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE, + U300_MMCSD_IRQS, NULL); /* * The order of device declaration may be important, since some devices diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h deleted file mode 100644 index 574d46e3829..00000000000 --- a/arch/arm/mach-u300/include/mach/system.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/system.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * System shutdown and reset functions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -static inline void arch_idle(void) -{ - cpu_do_idle(); -} diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index c563e5418d8..898a64517b0 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base, struct amba_device *dev; int ret; - dev = kzalloc(sizeof *dev, GFP_KERNEL); + dev = amba_device_alloc(name, base, SZ_4K); if (!dev) return ERR_PTR(-ENOMEM); - dev->dev.init_name = name; - - dev->res.start = base; - dev->res.end = base + SZ_4K - 1; - dev->res.flags = IORESOURCE_MEM; - dev->dma_mask = DMA_BIT_MASK(32); dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dev->irq[0] = irq; - dev->irq[1] = NO_IRQ; dev->periphid = periphid; dev->dev.platform_data = pdata; - ret = amba_device_register(dev, &iomem_resource); + ret = amba_device_add(dev, &iomem_resource); if (ret) { - kfree(dev); + amba_device_put(dev); return ERR_PTR(ret); } diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h deleted file mode 100644 index 258e5c919c2..00000000000 --- a/arch/arm/mach-ux500/include/mach/system.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 008ce22b9a0..0968772aedb 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -585,58 +585,58 @@ static struct pl022_ssp_controller ssp0_plat_data = { .num_chipselect = 1, }; -#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_IRQ { IRQ_AACI } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } -#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ } -#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ } +#define KMI0_IRQ { IRQ_SIC_KMI0 } +#define KMI1_IRQ { IRQ_SIC_KMI1 } /* * These devices are connected directly to the multi-layer AHB switch */ -#define SMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } -#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define SMC_IRQ { } +#define MPMC_IRQ { } +#define CLCD_IRQ { IRQ_CLCDINT } +#define DMAC_IRQ { IRQ_DMAINT } /* * These devices are connected via the core APB bridge */ -#define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } -#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } -#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } -#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define SCTL_IRQ { } +#define WATCHDOG_IRQ { IRQ_WDOGINT } +#define GPIO0_IRQ { IRQ_GPIOINT0 } +#define GPIO1_IRQ { IRQ_GPIOINT1 } +#define RTC_IRQ { IRQ_RTCINT } /* * These devices are connected via the DMA APB bridge */ -#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } -#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } -#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } -#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } -#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SCI_IRQ { IRQ_SCIINT } +#define UART0_IRQ { IRQ_UARTINT0 } +#define UART1_IRQ { IRQ_UARTINT1 } +#define UART2_IRQ { IRQ_UARTINT2 } +#define SSP_IRQ { IRQ_SSPINT } /* FPGA Primecells */ -AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); -AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); -AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); -AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +APB_DEVICE(aaci, "fpga:04", AACI, NULL); +APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data); +APB_DEVICE(kmi0, "fpga:06", KMI0, NULL); +APB_DEVICE(kmi1, "fpga:07", KMI1, NULL); /* DevChip Primecells */ -AMBA_DEVICE(smc, "dev:00", SMC, NULL); -AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL); -AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); -AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); -AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); -AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); -AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); -AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); -AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); -AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); -AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); -AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); +AHB_DEVICE(smc, "dev:00", SMC, NULL); +AHB_DEVICE(mpmc, "dev:10", MPMC, NULL); +AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AHB_DEVICE(dmac, "dev:30", DMAC, NULL); +APB_DEVICE(sctl, "dev:e0", SCTL, NULL); +APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data); +APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data); +APB_DEVICE(rtc, "dev:e8", RTC, NULL); +APB_DEVICE(sci0, "dev:f0", SCI, NULL); +APB_DEVICE(uart0, "dev:f1", UART0, NULL); +APB_DEVICE(uart1, "dev:f2", UART1, NULL); +APB_DEVICE(uart2, "dev:f3", UART2, NULL); +APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 2ef2f555f31..683e60776a8 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev); extern struct of_dev_auxdata versatile_auxdata_lookup[]; #endif -#define AMBA_DEVICE(name,busid,base,plat) \ -static struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = VERSATILE_##base##_BASE, \ - .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0, \ - .irq = base##_IRQ, \ -} +#define APB_DEVICE(name, busid, base, plat) \ +static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) + +#define AHB_DEVICE(name, busid, base, plat) \ +static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat) #endif diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h deleted file mode 100644 index f3fa347895f..00000000000 --- a/arch/arm/mach-versatile/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 9581c197500..19738331bd3 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = { .irq_base = IRQ_GPIO3_START, }; -#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ } -#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ } +#define UART3_IRQ { IRQ_SIC_UART3 } +#define SCI1_IRQ { IRQ_SIC_SCI3 } #define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B } /* * These devices are connected via the core APB bridge */ -#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } -#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO2_IRQ { IRQ_GPIOINT2 } +#define GPIO3_IRQ { IRQ_GPIOINT3 } /* * These devices are connected via the DMA APB bridge */ /* FPGA Primecells */ -AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); -AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL); -AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); +APB_DEVICE(uart3, "fpga:09", UART3, NULL); +APB_DEVICE(sci1, "fpga:0a", SCI1, NULL); +APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data); /* DevChip Primecells */ -AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); -AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); +APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data); +APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data); static struct amba_device *amba_devs[] __initdata = { &uart3_device, diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9b3d0fbaee7..cf8730d35e7 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,14 +1,55 @@ menu "Versatile Express platform type" depends on ARCH_VEXPRESS +config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + bool + select ARM_ERRATA_720789 + select ARM_ERRATA_751472 + select PL310_ERRATA_753970 if CACHE_PL310 + help + Provides common dependencies for Versatile Express platforms + based on Cortex-A5 and Cortex-A9 processors. In order to + build a working kernel, you must also enable relevant core + tile support or Flattened Device Tree based support options. + config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" + select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + select ARM_GIC select CPU_V7 + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + +config ARCH_VEXPRESS_DT + bool "Device Tree support for Versatile Express platforms" + select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA select ARM_GIC - select ARM_ERRATA_720789 - select ARM_ERRATA_751472 - select ARM_ERRATA_753970 + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR + select CPU_V7 select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select USE_OF + help + New Versatile Express platforms require Flattened Device Tree to + be passed to the kernel. + + This option enables support for systems using Cortex processor based + ARM core and logic (FPGA) tiles on the Versatile Express motherboard, + for example: + + - CoreTile Express A5x2 (V2P-CA5s) + - CoreTile Express A9x4 (V2P-CA9) + - CoreTile Express A15x2 (V2P-CA15) + - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs + (Soft Macrocell Models) + - Versatile Express RTSMs (Models) + + You must boot using a Flattened Device Tree in order to use these + platforms. The traditional (ATAGs) boot method is not usable on + these boards with this option. + + If your bootloader supports Flattened Device Tree based booting, + say Y here. endmenu diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot index 8630b3d10a4..909f85ebf5f 100644 --- a/arch/arm/mach-vexpress/Makefile.boot +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -1,3 +1,9 @@ +# Those numbers are used only by the non-DT V2P-CA9 platform +# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y zreladdr-y += 0x60008000 params_phys-y := 0x60000100 initrd_phys-y := 0x60800000 + +dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \ + vexpress-v2p-ca9.dtb \ + vexpress-v2p-ca15-tc1.dtb diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f4397159c17..a3a4980770b 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -1,19 +1,7 @@ -#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) -#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) +/* 2MB large area for motherboard's peripherals static mapping */ +#define V2M_PERIPH 0xf8000000 -#define AMBA_DEVICE(name,busid,base,plat) \ -struct amba_device name##_device = { \ - .dev = { \ - .coherent_dma_mask = ~0UL, \ - .init_name = busid, \ - .platform_data = plat, \ - }, \ - .res = { \ - .start = base, \ - .end = base + SZ_4K - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - .dma_mask = ~0UL, \ - .irq = IRQ_##base, \ - /* .dma = DMA_##base,*/ \ -} +/* Tile's peripherals static mappings should start here */ +#define V2T_PERIPH 0xf8200000 + +void vexpress_dt_smp_map_io(void); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index b1e87c184e5..73791f01029 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -30,57 +30,29 @@ #include <plat/clcd.h> -#define V2M_PA_CS7 0x10000000 - static struct map_desc ct_ca9x4_io_desc[] __initdata = { { - .virtual = __MMIO_P2V(CT_CA9X4_MPIC), - .pfn = __phys_to_pfn(CT_CA9X4_MPIC), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER), - .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = __MMIO_P2V(CT_CA9X4_L2CC), - .pfn = __phys_to_pfn(CT_CA9X4_L2CC), - .length = SZ_4K, - .type = MT_DEVICE, + .virtual = V2T_PERIPH, + .pfn = __phys_to_pfn(CT_CA9X4_MPIC), + .length = SZ_8K, + .type = MT_DEVICE, }, }; static void __init ct_ca9x4_map_io(void) { + iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); #ifdef CONFIG_LOCAL_TIMERS - twd_base = MMIO_P2V(A9_MPCORE_TWD); + twd_base = ioremap(A9_MPCORE_TWD, SZ_32); #endif - iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } static void __init ct_ca9x4_init_irq(void) { - gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST), - MMIO_P2V(A9_MPCORE_GIC_CPU)); -} - -#if 0 -static void __init ct_ca9x4_timer_init(void) -{ - writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); - writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); - - sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1"); - sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0, - "ct-timer0"); + gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K), + ioremap(A9_MPCORE_GIC_CPU, SZ_256)); } -static struct sys_timer ct_ca9x4_timer = { - .init = ct_ca9x4_timer_init, -}; -#endif - static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) { v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); @@ -109,10 +81,10 @@ static struct clcd_board ct_ca9x4_clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); -static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); -static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); -static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); +static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL); +static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL); +static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL); static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { &clcd_device, @@ -201,7 +173,7 @@ static void __init ct_ca9x4_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC); + void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K); /* set RAM latencies to 1 cycle for this core tile. */ writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); @@ -217,9 +189,17 @@ static void __init ct_ca9x4_init(void) } #ifdef CONFIG_SMP +static void *ct_ca9x4_scu_base __initdata; + static void __init ct_ca9x4_init_cpu_map(void) { - int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + int i, ncores; + + ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128); + if (WARN_ON(!ct_ca9x4_scu_base)) + return; + + ncores = scu_get_core_count(ct_ca9x4_scu_base); if (ncores > nr_cpu_ids) { pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", @@ -235,7 +215,7 @@ static void __init ct_ca9x4_init_cpu_map(void) static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) { - scu_enable(MMIO_P2V(A9_MPCORE_SCU)); + scu_enable(ct_ca9x4_scu_base); } #endif diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index a34d3d4faae..84acf8439d4 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -22,9 +22,6 @@ #define CT_CA9X4_SYSWDT (0x1e007000) #define CT_CA9X4_L2CC (0x1e00a000) -#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000) -#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020) - #define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) #define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) #define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) @@ -35,7 +32,7 @@ * Interrupts. Those in {} are for AMBA devices */ #define IRQ_CT_CA9X4_CLCDC { 76 } -#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_DMC { 0 } #define IRQ_CT_CA9X4_SMC { 77, 78 } #define IRQ_CT_CA9X4_TIMER0 80 #define IRQ_CT_CA9X4_TIMER1 81 diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index fd9e6c7ea49..fa8224794e0 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -10,12 +10,34 @@ * published by the Free Software Foundation. */ -#define DEBUG_LL_UART_OFFSET 0x00009000 +#define DEBUG_LL_PHYS_BASE 0x10000000 +#define DEBUG_LL_UART_OFFSET 0x00009000 + +#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000 +#define DEBUG_LL_UART_OFFSET_RS1 0x00090000 + +#define DEBUG_LL_VIRT_BASE 0xf8000000 .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #0xf8000000 @ virtual base - orr \rp, \rp, #0x10000000 @ physical base + + @ Make an educated guess regarding the memory map: + @ - the original A9 core tile, which has MPCore peripherals + @ located at 0x1e000000, should use UART at 0x10009000 + @ - all other (RS1 complaint) tiles use UART mapped + @ at 0x1c090000 + mrc p15, 4, \tmp, c15, c0, 0 + cmp \tmp, #0x1e000000 + + @ Original memory map + moveq \rp, #DEBUG_LL_UART_OFFSET + orreq \rv, \rp, #DEBUG_LL_VIRT_BASE + orreq \rp, \rp, #DEBUG_LL_PHYS_BASE + + @ RS1 memory map + movne \rp, #DEBUG_LL_UART_OFFSET_RS1 + orrne \rv, \rp, #DEBUG_LL_VIRT_BASE + orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 + .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h index 7054cbfc9de..4b10ee7657a 100644 --- a/arch/arm/mach-vexpress/include/mach/irqs.h +++ b/arch/arm/mach-vexpress/include/mach/irqs.h @@ -1,4 +1,4 @@ #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 -#define NR_IRQS 128 +#define NR_IRQS 256 diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h index 0a3a3751840..31a92890893 100644 --- a/arch/arm/mach-vexpress/include/mach/motherboard.h +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -39,33 +39,30 @@ #define V2M_CF (V2M_PA_CS7 + 0x0001a000) #define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) -#define V2M_SYS_ID (V2M_SYSREGS + 0x000) -#define V2M_SYS_SW (V2M_SYSREGS + 0x004) -#define V2M_SYS_LED (V2M_SYSREGS + 0x008) -#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024) -#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030) -#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030) -#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034) -#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038) -#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038) -#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c) -#define V2M_SYS_MCI (V2M_SYSREGS + 0x048) -#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c) -#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058) -#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c) -#define V2M_SYS_MISC (V2M_SYSREGS + 0x060) -#define V2M_SYS_DMA (V2M_SYSREGS + 0x064) -#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084) -#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088) -#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) -#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) -#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) - -#define V2M_TIMER0 (V2M_TIMER01 + 0x000) -#define V2M_TIMER1 (V2M_TIMER01 + 0x020) - -#define V2M_TIMER2 (V2M_TIMER23 + 0x000) -#define V2M_TIMER3 (V2M_TIMER23 + 0x020) +/* + * Offsets from SYSREGS base + */ +#define V2M_SYS_ID 0x000 +#define V2M_SYS_SW 0x004 +#define V2M_SYS_LED 0x008 +#define V2M_SYS_100HZ 0x024 +#define V2M_SYS_FLAGS 0x030 +#define V2M_SYS_FLAGSSET 0x030 +#define V2M_SYS_FLAGSCLR 0x034 +#define V2M_SYS_NVFLAGS 0x038 +#define V2M_SYS_NVFLAGSSET 0x038 +#define V2M_SYS_NVFLAGSCLR 0x03c +#define V2M_SYS_MCI 0x048 +#define V2M_SYS_FLASH 0x03c +#define V2M_SYS_CFGSW 0x058 +#define V2M_SYS_24MHZ 0x05c +#define V2M_SYS_MISC 0x060 +#define V2M_SYS_DMA 0x064 +#define V2M_SYS_PROCID0 0x084 +#define V2M_SYS_PROCID1 0x088 +#define V2M_SYS_CFGDATA 0x0a0 +#define V2M_SYS_CFGCTRL 0x0a4 +#define V2M_SYS_CFGSTAT 0x0a8 /* @@ -117,6 +114,13 @@ int v2m_cfg_write(u32 devfn, u32 data); int v2m_cfg_read(u32 devfn, u32 *data); +void v2m_flags_set(u32 data); + +/* + * Miscellaneous + */ +#define SYS_MISC_MASTERSITE (1 << 14) +#define SYS_PROCIDx_HBI_MASK 0xfff /* * Core tile IDs diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h deleted file mode 100644 index f653a8e265b..00000000000 --- a/arch/arm/mach-vexpress/include/mach/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-vexpress/include/mach/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h index 7972c5748d0..7dab5596b86 100644 --- a/arch/arm/mach-vexpress/include/mach/uncompress.h +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -22,7 +22,27 @@ #define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) #define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) -#define get_uart_base() (0x10000000 + 0x00009000) +#define UART_BASE 0x10009000 +#define UART_BASE_RS1 0x1c090000 + +static unsigned long get_uart_base(void) +{ + unsigned long mpcore_periph; + + /* + * Make an educated guess regarding the memory map: + * - the original A9 core tile, which has MPCore peripherals + * located at 0x1e000000, should use UART at 0x10009000 + * - all other (RS1 complaint) tiles use UART mapped + * at 0x1c090000 + */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph)); + + if (mpcore_periph == 0x1e000000) + return UART_BASE; + else + return UART_BASE_RS1; +} /* * This does not append a newline diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 124ffb16909..14ba1128ae8 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,21 +12,168 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_fdt.h> + +#include <asm/smp_scu.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> #include <mach/motherboard.h> -#define V2M_PA_CS7 0x10000000 #include "core.h" extern void versatile_secondary_startup(void); +#if defined(CONFIG_OF) + +static enum { + GENERIC_SCU, + CORTEX_A9_SCU, +} vexpress_dt_scu __initdata = GENERIC_SCU; + +static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = { + .virtual = V2T_PERIPH, + /* .pfn set in vexpress_dt_init_cortex_a9_scu() */ + .length = SZ_128, + .type = MT_DEVICE, +}; + +static void *vexpress_dt_cortex_a9_scu_base __initdata; + +const static char *vexpress_dt_cortex_a9_match[] __initconst = { + "arm,cortex-a5-scu", + "arm,cortex-a9-scu", + NULL +}; + +static int __init vexpress_dt_find_scu(unsigned long node, + const char *uname, int depth, void *data) +{ + if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) { + phys_addr_t phys_addr; + __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL); + + if (WARN_ON(!reg)) + return -EINVAL; + + phys_addr = be32_to_cpup(reg); + vexpress_dt_scu = CORTEX_A9_SCU; + + vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr); + iotable_init(&vexpress_dt_cortex_a9_scu_map, 1); + vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256); + if (WARN_ON(!vexpress_dt_cortex_a9_scu_base)) + return -EFAULT; + } + + return 0; +} + +void __init vexpress_dt_smp_map_io(void) +{ + if (initial_boot_params) + WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL)); +} + +static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname, + int depth, void *data) +{ + static int prev_depth = -1; + static int nr_cpus = -1; + + if (prev_depth > depth && nr_cpus > 0) + return nr_cpus; + + if (nr_cpus < 0 && strcmp(uname, "cpus") == 0) + nr_cpus = 0; + + if (nr_cpus >= 0) { + const char *device_type = of_get_flat_dt_prop(node, + "device_type", NULL); + + if (device_type && strcmp(device_type, "cpu") == 0) + nr_cpus++; + } + + prev_depth = depth; + + return 0; +} + +static void __init vexpress_dt_smp_init_cpus(void) +{ + int ncores = 0, i; + + switch (vexpress_dt_scu) { + case GENERIC_SCU: + ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL); + break; + case CORTEX_A9_SCU: + ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base); + break; + default: + WARN_ON(1); + break; + } + + if (ncores < 2) + return; + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + for (i = 0; i < ncores; ++i) + set_cpu_possible(i, true); + + set_smp_cross_call(gic_raise_softirq); +} + +static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + switch (vexpress_dt_scu) { + case GENERIC_SCU: + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + break; + case CORTEX_A9_SCU: + scu_enable(vexpress_dt_cortex_a9_scu_base); + break; + default: + WARN_ON(1); + break; + } +} + +#else + +static void __init vexpress_dt_smp_init_cpus(void) +{ + WARN_ON(1); +} + +void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) +{ + WARN_ON(1); +} + +#endif + /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ void __init smp_init_cpus(void) { - ct_desc->init_cpu_map(); + if (ct_desc) + ct_desc->init_cpu_map(); + else + vexpress_dt_smp_init_cpus(); + } void __init platform_smp_prepare_cpus(unsigned int max_cpus) @@ -35,7 +182,10 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - ct_desc->smp_enable(max_cpus); + if (ct_desc) + ct_desc->smp_enable(max_cpus); + else + vexpress_dt_smp_prepare_cpus(max_cpus); /* * Write the address of secondary startup into the @@ -43,7 +193,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(virt_to_phys(versatile_secondary_startup), - MMIO_P2V(V2M_SYS_FLAGSSET)); + v2m_flags_set(virt_to_phys(versatile_secondary_startup)); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b4a28ca0e50..47cdcca5a7e 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -6,6 +6,10 @@ #include <linux/amba/mmci.h> #include <linux/io.h> #include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/smsc911x.h> @@ -21,6 +25,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/sp810.h> #include <asm/hardware/gic.h> @@ -40,29 +46,45 @@ static struct map_desc v2m_io_desc[] __initdata = { { - .virtual = __MMIO_P2V(V2M_PA_CS7), + .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(V2M_PA_CS7), .length = SZ_128K, .type = MT_DEVICE, }, }; -static void __init v2m_timer_init(void) +static void __iomem *v2m_sysreg_base; + +static void __init v2m_sysctl_init(void __iomem *base) { u32 scctrl; + if (WARN_ON(!base)) + return; + /* Select 1MHz TIMCLK as the reference clock for SP804 timers */ - scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL)); + scctrl = readl(base + SCCTRL); scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK; scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK; - writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL)); + writel(scctrl, base + SCCTRL); +} + +static void __init v2m_sp804_init(void __iomem *base, unsigned int irq) +{ + if (WARN_ON(!base || irq == NO_IRQ)) + return; + + writel(0, base + TIMER_1_BASE + TIMER_CTRL); + writel(0, base + TIMER_2_BASE + TIMER_CTRL); - writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); - writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); + sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1"); + sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0"); +} - sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1"); - sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0, - "v2m-timer0"); +static void __init v2m_timer_init(void) +{ + v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K)); + v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } static struct sys_timer v2m_timer = { @@ -82,14 +104,14 @@ int v2m_cfg_write(u32 devfn, u32 data) devfn |= SYS_CFG_START | SYS_CFG_WRITE; spin_lock(&v2m_cfg_lock); - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); - writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); + writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT); - writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); - writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA); + writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); do { - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); } while (val == 0); spin_unlock(&v2m_cfg_lock); @@ -103,22 +125,28 @@ int v2m_cfg_read(u32 devfn, u32 *data) devfn |= SYS_CFG_START; spin_lock(&v2m_cfg_lock); - writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); - writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT); + writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL); mb(); do { cpu_relax(); - val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT); } while (val == 0); - *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); + *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA); spin_unlock(&v2m_cfg_lock); return !!(val & SYS_CFG_ERR); } +void __init v2m_flags_set(u32 data) +{ + writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR); + writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET); +} + static struct resource v2m_pcie_i2c_resource = { .start = V2M_SERIAL_BUS_PCI, @@ -204,7 +232,7 @@ static struct platform_device v2m_usb_device = { static void v2m_flash_set_vpp(struct platform_device *pdev, int on) { - writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); + writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH); } static struct physmap_flash_data v2m_flash_data = { @@ -258,7 +286,7 @@ static struct platform_device v2m_cf_device = { static unsigned int v2m_mmci_status(struct device *dev) { - return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0); + return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0); } static struct mmci_platform_data v2m_mmci_data = { @@ -266,16 +294,16 @@ static struct mmci_platform_data v2m_mmci_data = { .status = v2m_mmci_status, }; -static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); -static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); -static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); -static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); -static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); -static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); -static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); -static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); -static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); -static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); +static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL); +static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data); +static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL); +static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL); +static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL); +static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL); +static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL); +static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL); +static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL); +static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL); static struct amba_device *v2m_amba_devs[] __initdata = { &aaci_device, @@ -371,7 +399,7 @@ static void __init v2m_init_early(void) { ct_desc->init_early(); clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); + versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); } static void v2m_power_off(void) @@ -400,20 +428,23 @@ static void __init v2m_populate_ct_desc(void) u32 current_tile_id; ct_desc = NULL; - current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK; + current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0) + & V2M_CT_ID_MASK; for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i) if (ct_descs[i]->id == current_tile_id) ct_desc = ct_descs[i]; if (!ct_desc) - panic("vexpress: failed to populate core tile description " - "for tile ID 0x%8x\n", current_tile_id); + panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n" + "You may need a device tree blob or a different kernel to boot on this board.\n", + current_tile_id); } static void __init v2m_map_io(void) { iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K); v2m_populate_ct_desc(); ct_desc->map_io(); } @@ -452,3 +483,205 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, .restart = v2m_restart, MACHINE_END + +#if defined(CONFIG_ARCH_VEXPRESS_DT) + +static struct map_desc v2m_rs1_io_desc __initdata = { + .virtual = V2M_PERIPH, + .pfn = __phys_to_pfn(0x1c000000), + .length = SZ_2M, + .type = MT_DEVICE, +}; + +static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, + int depth, void *data) +{ + const char **map = data; + + if (strcmp(uname, "motherboard") != 0) + return 0; + + *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); + + return 1; +} + +void __init v2m_dt_map_io(void) +{ + const char *map = NULL; + + of_scan_flat_dt(v2m_dt_scan_memory_map, &map); + + if (map && strcmp(map, "rs1") == 0) + iotable_init(&v2m_rs1_io_desc, 1); + else + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + +#if defined(CONFIG_SMP) + vexpress_dt_smp_map_io(); +#endif +} + +static struct clk_lookup v2m_dt_lookups[] = { + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* SP804 timers */ + .dev_id = "sp804", + .con_id = "v2m-timer0", + .clk = &v2m_sp804_clk, + }, { /* SP804 timers */ + .dev_id = "sp804", + .con_id = "v2m-timer1", + .clk = &v2m_sp804_clk, + }, { /* PL180 MMCI */ + .dev_id = "mb:mmci", /* 10005000.mmci */ + .clk = &osc2_clk, + }, { /* PL050 KMI0 */ + .dev_id = "10006000.kmi", + .clk = &osc2_clk, + }, { /* PL050 KMI1 */ + .dev_id = "10007000.kmi", + .clk = &osc2_clk, + }, { /* PL011 UART0 */ + .dev_id = "10009000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART1 */ + .dev_id = "1000a000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART2 */ + .dev_id = "1000b000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART3 */ + .dev_id = "1000c000.uart", + .clk = &osc2_clk, + }, { /* SP805 WDT */ + .dev_id = "1000f000.wdt", + .clk = &v2m_ref_clk, + }, { /* PL111 CLCD */ + .dev_id = "1001f000.clcd", + .clk = &osc1_clk, + }, + /* RS1 memory map */ + { /* PL180 MMCI */ + .dev_id = "mb:mmci", /* 1c050000.mmci */ + .clk = &osc2_clk, + }, { /* PL050 KMI0 */ + .dev_id = "1c060000.kmi", + .clk = &osc2_clk, + }, { /* PL050 KMI1 */ + .dev_id = "1c070000.kmi", + .clk = &osc2_clk, + }, { /* PL011 UART0 */ + .dev_id = "1c090000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART1 */ + .dev_id = "1c0a0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART2 */ + .dev_id = "1c0b0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART3 */ + .dev_id = "1c0c0000.uart", + .clk = &osc2_clk, + }, { /* SP805 WDT */ + .dev_id = "1c0f0000.wdt", + .clk = &v2m_ref_clk, + }, { /* PL111 CLCD */ + .dev_id = "1c1f0000.clcd", + .clk = &osc1_clk, + }, +}; + +void __init v2m_dt_init_early(void) +{ + struct device_node *node; + u32 dt_hbi; + + node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); + v2m_sysreg_base = of_iomap(node, 0); + if (WARN_ON(!v2m_sysreg_base)) + return; + + /* Confirm board type against DT property, if available */ + if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { + u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC); + u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ? + V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); + u32 hbi = id & SYS_PROCIDx_HBI_MASK; + + if (WARN_ON(dt_hbi != hbi)) + pr_warning("vexpress: DT HBI (%x) is not matching " + "hardware (%x)!\n", dt_hbi, hbi); + } + + clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups)); + versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000); +} + +static struct of_device_id vexpress_irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + {} +}; + +static void __init v2m_dt_init_irq(void) +{ + of_irq_init(vexpress_irq_match); +} + +static void __init v2m_dt_timer_init(void) +{ + struct device_node *node; + const char *path; + int err; + + node = of_find_compatible_node(NULL, NULL, "arm,sp810"); + v2m_sysctl_init(of_iomap(node, 0)); + + err = of_property_read_string(of_aliases, "arm,v2m_timer", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0)); +} + +static struct sys_timer v2m_dt_timer = { + .init = v2m_dt_timer_init, +}; + +static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", + &v2m_flash_data), + OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), + /* RS1 memory map */ + OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", + &v2m_flash_data), + OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), + {} +}; + +static void __init v2m_dt_init(void) +{ + l2x0_of_init(0x00400000, 0xfe0fffff); + of_platform_populate(NULL, of_default_bus_match_table, + v2m_dt_auxdata_lookup, NULL); + pm_power_off = v2m_power_off; +} + +const static char *v2m_dt_match[] __initconst = { + "arm,vexpress", + NULL, +}; + +DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") + .dt_compat = v2m_dt_match, + .map_io = v2m_dt_map_io, + .init_early = v2m_dt_init_early, + .init_irq = v2m_dt_init_irq, + .timer = &v2m_dt_timer, + .init_machine = v2m_dt_init, + .handle_irq = gic_handle_irq, + .restart = v2m_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h index d6c757eaf26..58fa8010ee6 100644 --- a/arch/arm/mach-vt8500/include/mach/system.h +++ b/arch/arm/mach-vt8500/include/mach/system.h @@ -7,11 +7,6 @@ /* PM Software Reset request register */ #define VT8500_PMSR_VIRT 0xf8130060 -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - static inline void arch_reset(char mode, const char *cmd) { writel(1, VT8500_PMSR_VIRT); diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 78110befb7a..db82568a998 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = { void __init nuc900_board_init(struct platform_device **device, int size) { + disable_hlt(); platform_add_devices(device, size); platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev)); spi_register_board_info(nuc900_spi_board_info, diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h deleted file mode 100644 index 2aaeb931161..00000000000 --- a/arch/arm/mach-w90x900/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/system.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * Based on arch/arm/mach-s3c2410/include/mach/system.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -static void arch_idle(void) -{ -} diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h deleted file mode 100644 index 8e88e0b8d2b..00000000000 --- a/arch/arm/mach-zynq/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-zynq/include/mach/system.h - * - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_SYSTEM_H__ -#define __MACH_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1a3ca248816..7edef912163 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -631,7 +631,8 @@ comment "Processor Features" config ARM_LPAE bool "Support for the Large Physical Address Extension" - depends on MMU && CPU_V7 + depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ + !CPU_32v4 && !CPU_32v3 help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7a24d39661f..a655d3da386 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -55,7 +55,7 @@ loop1: cmp r1, #2 @ see what cache we have at this level blt skip @ skip if no cache, or just i-cache #ifdef CONFIG_PREEMPT - save_and_disable_irqs r9 @ make cssr&csidr read atomic + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic #endif mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr isb @ isb to sych the new cssr&csidr diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 1bf0df81bdc..16d10a807a6 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -65,6 +65,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx27_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); extern int mx53_clocks_init_dt(void); extern int mx6q_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h deleted file mode 100644 index 13ad0df2e86..00000000000 --- a/arch/arm/plat-mxc/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 06383b51e65..4de7d1e79e7 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -69,6 +69,7 @@ void __init omap_reserve(void) omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); } void __init omap_init_consistent_dma_size(void) diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 3047ff923a6..8c7994ce986 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h deleted file mode 100644 index 8e5ebd74b12..00000000000 --- a/arch/arm/plat-omap/include/plat/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 21f1fda8b66..32a09931350 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -32,6 +32,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/regs-clock.h> #include <asm/irq.h> #include <asm/cacheflush.h> @@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void) return __raw_readl(S3C2410_GSTATUS1); } +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { + arm_pm_idle = s3c24xx_default_idle; + /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h deleted file mode 100644 index 86c6f83b44c..00000000000 --- a/arch/arm/plat-spear/include/plat/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/system.h - * - * SPEAr platform specific architecture functions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_SYSTEM_H -#define __PLAT_SYSTEM_H - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c index 0fb3961999b..e1566879315 100644 --- a/arch/arm/plat-versatile/localtimer.c +++ b/arch/arm/plat-versatile/localtimer.c @@ -11,16 +11,42 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/clockchips.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/smp_twd.h> #include <asm/localtimer.h> #include <mach/irqs.h> +const static struct of_device_id twd_of_match[] __initconst = { + { .compatible = "arm,cortex-a9-twd-timer", }, + { .compatible = "arm,cortex-a5-twd-timer", }, + { .compatible = "arm,arm11mp-twd-timer", }, + { }, +}; + /* * Setup the local clock events for a CPU. */ int __cpuinit local_timer_setup(struct clock_event_device *evt) { +#if defined(CONFIG_OF) + static int dt_node_probed; + + /* Look for TWD node only once */ + if (!dt_node_probed) { + struct device_node *node = of_find_matching_node(NULL, + twd_of_match); + + if (node) + twd_base = of_iomap(node, 0); + + dt_node_probed = 1; + } +#endif + if (!twd_base) + return -ENXIO; + evt->irq = IRQ_LOCALTIMER; twd_timer_setup(evt); return 0; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 402a7bb7266..889c544688c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1055,8 +1055,6 @@ struct platform_device *__init at32_add_device_usart(unsigned int id) return at32_usarts[id]; } -struct platform_device *atmel_default_console_device; - void __init at32_setup_serial_console(unsigned int usart_id) { atmel_default_console_device = at32_usarts[usart_id]; diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 8181293115e..16a24b14146 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -30,9 +30,6 @@ #define cpu_is_at91sam9261() (0) #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) -#define cpu_is_at91cap9() (0) -#define cpu_is_at91cap9_revB() (0) -#define cpu_is_at91cap9_revC() (0) #define cpu_is_at91sam9g10() (0) #define cpu_is_at91sam9g20() (0) #define cpu_is_at91sam9g45() (0) diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile index ecca820e604..6891257d514 100644 --- a/arch/c6x/boot/Makefile +++ b/arch/c6x/boot/Makefile @@ -13,7 +13,7 @@ obj-y += linked_dtb.o endif $(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call cmd,dtc) + $(call if_changed_dep,dtc) quiet_cmd_cp = CP $< $@$2 cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h index 756bde4fb4f..3c793682e5d 100644 --- a/arch/m68k/include/asm/mcf_pgtable.h +++ b/arch/m68k/include/asm/mcf_pgtable.h @@ -78,7 +78,8 @@ | CF_PAGE_READABLE \ | CF_PAGE_WRITABLE \ | CF_PAGE_EXEC \ - | CF_PAGE_SYSTEM) + | CF_PAGE_SYSTEM \ + | CF_PAGE_SHARED) #define PAGE_COPY __pgprot(CF_PAGE_VALID \ | CF_PAGE_ACCESSED \ diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c index babd5a97cdc..875b800ef0d 100644 --- a/arch/m68k/mm/mcfmmu.c +++ b/arch/m68k/mm/mcfmmu.c @@ -87,7 +87,7 @@ void __init paging_init(void) int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) { - unsigned long flags, mmuar; + unsigned long flags, mmuar, mmutr; struct mm_struct *mm; pgd_t *pgd; pmd_t *pmd; @@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word) if (!pte_dirty(*pte) && !KMAPAREA(mmuar)) set_pte(pte, pte_wrprotect(*pte)); - mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | - (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK) - >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V); + mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V; + if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE)) + mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT; + mmu_write(MMUTR, mmutr); mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) | ((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X); diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index 863889fc31c..281e38c2b6c 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -136,7 +136,7 @@ Luser_return: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ + moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */ jne Lwork_to_do /* still work to do */ Lreturn: @@ -148,8 +148,6 @@ Lwork_to_do: btst #TIF_NEED_RESCHED,%d1 jne reschedule - /* GERG: do we need something here for TRACEing?? */ - Lsignal_return: subql #4,%sp /* dummy return address */ SAVE_SWITCH_STACK diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h index 054537c5f9c..e612ce4512c 100644 --- a/arch/openrisc/include/asm/ptrace.h +++ b/arch/openrisc/include/asm/ptrace.h @@ -77,7 +77,6 @@ struct pt_regs { long syscallno; /* Syscall number (used by strace) */ long dummy; /* Cheap alignment fix */ }; -#endif /* __ASSEMBLY__ */ /* TODO: Rename this to REDZONE because that's what it is */ #define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */ @@ -87,6 +86,13 @@ struct pt_regs { #define user_stack_pointer(regs) ((unsigned long)(regs)->sp) #define profile_pc(regs) instruction_pointer(regs) +static inline long regs_return_value(struct pt_regs *regs) +{ + return regs->gpr[11]; +} + +#endif /* __ASSEMBLY__ */ + /* * Offsets used by 'ptrace' system call interface. */ diff --git a/arch/openrisc/kernel/init_task.c b/arch/openrisc/kernel/init_task.c index 45744a38492..ca534082d5f 100644 --- a/arch/openrisc/kernel/init_task.c +++ b/arch/openrisc/kernel/init_task.c @@ -17,6 +17,7 @@ #include <linux/init_task.h> #include <linux/mqueue.h> +#include <linux/export.h> static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c index 59b30233833..4bfead22095 100644 --- a/arch/openrisc/kernel/irq.c +++ b/arch/openrisc/kernel/irq.c @@ -23,6 +23,7 @@ #include <linux/irq.h> #include <linux/seq_file.h> #include <linux/kernel_stat.h> +#include <linux/export.h> #include <linux/irqflags.h> diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c index 656b94beab8..7259047d5f9 100644 --- a/arch/openrisc/kernel/ptrace.c +++ b/arch/openrisc/kernel/ptrace.c @@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; - /* Are these regs right??? */ - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->syscallno, - regs->gpr[3], regs->gpr[4], - regs->gpr[5], regs->gpr[6]); + audit_syscall_entry(audit_arch(), regs->syscallno, + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); return ret ? : regs->syscallno; } @@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) { int step; - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]), - regs->gpr[11]); + audit_syscall_exit(regs); step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 55cca1dac43..19ab7b2ea1c 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -31,7 +31,11 @@ ifdef CONFIG_64BIT UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 WIDTH := 64 + +# FIXME: if no default set, should really try to locate dynamically +ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := hppa64-linux-gnu- +endif else # 32-bit WIDTH := endif diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4f80cf1ce77..3e57a00b8cb 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1213,7 +1213,7 @@ do_user_signal: /* r10 contains MSR_KERNEL here */ stw r3,_TRAP(r1) 2: addi r3,r1,STACK_FRAME_OVERHEAD mr r4,r9 - bl do_signal + bl do_notify_resume REST_NVGPRS(r1) b recheck diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d834425186a..866462cbe2d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -751,12 +751,16 @@ user_work: andi. r0,r4,_TIF_NEED_RESCHED beq 1f + li r5,1 + TRACE_AND_RESTORE_IRQ(r5); bl .schedule b .ret_from_except_lite 1: bl .save_nvgprs + li r5,1 + TRACE_AND_RESTORE_IRQ(r5); addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_signal + bl .do_notify_resume b .ret_from_except unrecov_restore: diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3844ca7c509..15c5a4f6de0 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -774,8 +774,8 @@ alignment_common: program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD DISABLE_INTS + addi r3,r1,STACK_FRAME_OVERHEAD bl .program_check_exception b .ret_from_except diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 2300426e531..ac6e437b102 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -11,6 +11,7 @@ #include <linux/tracehook.h> #include <linux/signal.h> +#include <linux/key.h> #include <asm/hw_breakpoint.h> #include <asm/uaccess.h> #include <asm/unistd.h> @@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, } } -static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) +static int do_signal(struct pt_regs *regs) { + sigset_t *oldset; siginfo_t info; int signr; struct k_sigaction ka; @@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; - else if (!oldset) + else oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); @@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) return ret; } -void do_signal(struct pt_regs *regs, unsigned long thread_info_flags) +void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { if (thread_info_flags & _TIF_SIGPENDING) - do_signal_pending(NULL, regs); + do_signal(regs); if (thread_info_flags & _TIF_NOTIFY_RESUME) { clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); } } diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index 6c0ddfc0603..8dde973aaaf 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); +extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size, int is_32); diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c index 71bd105f386..0ba103ae83a 100644 --- a/arch/powerpc/platforms/wsp/smp.c +++ b/arch/powerpc/platforms/wsp/smp.c @@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr) static int __init smp_a2_probe(void) { - return cpus_weight(cpu_possible_map); + return num_possible_cpus(); } static struct smp_ops_t a2_smp_ops = { diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index d1727584230..6d99a5fcc09 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -227,6 +227,9 @@ config COMPAT config SYSVIPC_COMPAT def_bool y if COMPAT && SYSVIPC +config KEYS_COMPAT + def_bool y if COMPAT && KEYS + config AUDIT_ARCH def_bool y diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index 2e49748b27d..234f1d859ce 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -172,13 +172,6 @@ static inline int is_compat_task(void) return is_32bit_task(); } -#else - -static inline int is_compat_task(void) -{ - return 0; -} - #endif static inline void __user *arch_compat_alloc_user_space(long len) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 18c51df9fe0..ff605a39cf4 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper) ENTRY(sys32_poll_wrapper) llgtr %r2,%r2 # struct pollfd * llgfr %r3,%r3 # unsigned int - lgfr %r4,%r4 # long + lgfr %r4,%r4 # int jg sys_poll # branch to system call ENTRY(sys32_setresgid16_wrapper) diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index 39f8fd4438f..c383ce440d9 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/gfp.h> #include <linux/slab.h> -#include <linux/crash_dump.h> #include <linux/bootmem.h> #include <linux/elf.h> #include <asm/ipl.h> diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3201ae44799..e795933eb2c 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <asm/timer.h> #include <asm/nmi.h> -#include <asm/compat.h> #include <asm/smp.h> #include "entry.h" @@ -76,7 +75,6 @@ static void default_idle(void) if (test_thread_flag(TIF_MCCK_PENDING)) { local_mcck_enable(); local_irq_enable(); - s390_handle_mcck(); return; } trace_hardirqs_on(); @@ -93,10 +91,12 @@ void cpu_idle(void) for (;;) { tick_nohz_idle_enter(); rcu_idle_enter(); - while (!need_resched()) + while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING)) default_idle(); rcu_idle_exit(); tick_nohz_idle_exit(); + if (test_thread_flag(TIF_MCCK_PENDING)) + s390_handle_mcck(); preempt_enable_no_resched(); schedule(); preempt_disable(); diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 9d82ed4bcb2..61f95489d70 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -20,8 +20,8 @@ #include <linux/regset.h> #include <linux/tracehook.h> #include <linux/seccomp.h> +#include <linux/compat.h> #include <trace/syscall.h> -#include <asm/compat.h> #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 354de0763ef..3b2efc81f34 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -46,6 +46,7 @@ #include <linux/kexec.h> #include <linux/crash_dump.h> #include <linux/memory.h> +#include <linux/compat.h> #include <asm/ipl.h> #include <asm/uaccess.h> @@ -59,7 +60,6 @@ #include <asm/ptrace.h> #include <asm/sections.h> #include <asm/ebcdic.h> -#include <asm/compat.h> #include <asm/kvm_virtio.h> #include <asm/diag.h> diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index a8ba840294f..2d421d90fad 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -30,7 +30,6 @@ #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/lowcore.h> -#include <asm/compat.h> #include "entry.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index fa02f443f5f..14da278febb 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -113,11 +113,14 @@ static void fixup_clock_comparator(unsigned long long delta) static int s390_next_ktime(ktime_t expires, struct clock_event_device *evt) { + struct timespec ts; u64 nsecs; - nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset())); + ts.tv_sec = ts.tv_nsec = 0; + monotonic_to_bootbased(&ts); + nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires)); do_div(nsecs, 125); - S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9); + S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9); set_clock_comparator(S390_lowcore.clock_comparator); return 0; } diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 354dd39073e..e8fcd928dc7 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -36,7 +36,6 @@ #include <asm/pgtable.h> #include <asm/irq.h> #include <asm/mmu_context.h> -#include <asm/compat.h> #include "../kernel/entry.h" #ifndef CONFIG_64BIT diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 5d633019d8f..50236610de8 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end) #ifdef CONFIG_MEMORY_HOTPLUG int arch_add_memory(int nid, u64 start, u64 size) { - struct pglist_data *pgdat; + unsigned long zone_start_pfn, zone_end_pfn, nr_pages; + unsigned long start_pfn = PFN_DOWN(start); + unsigned long size_pages = PFN_DOWN(size); struct zone *zone; int rc; - pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; - rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size)); + for_each_zone(zone) { + if (zone_idx(zone) != ZONE_MOVABLE) { + /* Add range within existing zone limits */ + zone_start_pfn = zone->zone_start_pfn; + zone_end_pfn = zone->zone_start_pfn + + zone->spanned_pages; + } else { + /* Add remaining range to ZONE_MOVABLE */ + zone_start_pfn = start_pfn; + zone_end_pfn = start_pfn + size_pages; + } + if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn) + continue; + nr_pages = (start_pfn + size_pages > zone_end_pfn) ? + zone_end_pfn - start_pfn : size_pages; + rc = __add_pages(nid, zone, start_pfn, nr_pages); + if (rc) + break; + start_pfn += nr_pages; + size_pages -= nr_pages; + if (!size_pages) + break; + } if (rc) vmem_remove_mapping(start, size); return rc; diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index f09c74881b7..a0155c02e32 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -29,8 +29,8 @@ #include <linux/mman.h> #include <linux/module.h> #include <linux/random.h> +#include <linux/compat.h> #include <asm/pgalloc.h> -#include <asm/compat.h> static unsigned long stack_maxrandom_size(void) { diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 9a4d02f64f1..51b0738e13d 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -574,7 +574,7 @@ static inline void page_table_free_pgste(unsigned long *table) page = pfn_to_page(__pa(table) >> PAGE_SHIFT); mp = (struct gmap_pgtable *) page->index; BUG_ON(!list_empty(&mp->mapper)); - pgtable_page_ctor(page); + pgtable_page_dtor(page); atomic_set(&page->_mapcount, -1); kfree(mp); __free_page(page); diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154dd21..24b1ee410da 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -169,6 +169,11 @@ static struct resource sh_eth_giga1_resources[] = { .end = 0xfee00fff, .flags = IORESOURCE_MEM, }, { + /* TSU */ + .start = 0xfee01800, + .end = 0xfee01fff, + .flags = IORESOURCE_MEM, + }, { .start = 316, .end = 316, .flags = IORESOURCE_IRQ, @@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - } -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { - .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95c2b6..ebd0f818a25 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -22,6 +22,7 @@ #include <linux/i2c.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <media/ov772x.h> #include <media/soc_camera.h> #include <media/soc_camera_platform.h> diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 033ef2ba621..cde7c0085ce 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -29,9 +29,11 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/sh_eth.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> #include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <media/mt9t112.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 2a18b06abda..5b382e1afae 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -22,6 +22,7 @@ #include <linux/input/sh_keysc.h> #include <linux/i2c.h> #include <linux/usb/r8a66597.h> +#include <linux/videodev2.h> #include <media/rj54n1cb0c.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 68c3d6f4289..d37ba272052 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -21,9 +21,11 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <media/ov772x.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <asm/clock.h> #include <asm/machvec.h> diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 036fe1adaef..2b07fc01695 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -24,6 +24,7 @@ #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> #include <linux/sh_eth.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <sound/sh_fsi.h> diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index fa7b978cc72..fb8f1499074 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -74,7 +74,7 @@ struct pci_errors { { SH4_PCIINT_MLCK, "master lock error" }, { SH4_PCIINT_TABT, "target-target abort" }, { SH4_PCIINT_TRET, "target retry time out" }, - { SH4_PCIINT_MFDE, "master function disable erorr" }, + { SH4_PCIINT_MFDE, "master function disable error" }, { SH4_PCIINT_PRTY, "address parity error" }, { SH4_PCIINT_SERR, "SERR" }, { SH4_PCIINT_TWDP, "data parity error for target write" }, diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0daec1..071bcb4d4bf 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -3,9 +3,10 @@ * * This file is released under the GPLv2 */ +#ifndef __ASM_SH_DEVICE_H +#define __ASM_SH_DEVICE_H -struct dev_archdata { -}; +#include <asm-generic/device.h> struct platform_device; /* allocate contiguous memory chunk and fill in struct resource */ @@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, void plat_early_device_setup(void); -struct pdev_archdata { -}; +#endif /* __ASM_SH_DEVICE_H */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a5064..70bd96646f4 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), - CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), + CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7b2da6b3a1..2875e8be4f7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -133,7 +133,7 @@ static struct resource spi0_resources[] = { [0] = { .start = 0xfe002000, .end = 0xfe0020ff, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, [1] = { .start = 86, @@ -661,6 +661,25 @@ static struct platform_device spi0_device = { .resource = spi0_resources, }; +static struct resource spi1_resources[] = { + { + .start = 0xffd8ee70, + .end = 0xffd8eeff, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + { + .start = 54, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device spi1_device = { + .name = "sh_spi", + .id = 1, + .num_resources = ARRAY_SIZE(spi1_resources), + .resource = spi1_resources, +}; + static struct resource usb_ehci_resources[] = { [0] = { .start = 0xfe4f1000, @@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = { &dma2_device, &dma3_device, &spi0_device, + &spi1_device, &usb_ehci_device, &usb_ohci_device, }; diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 3147a9a6fb8..f624174bf23 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) mp_ops->prepare_cpus(max_cpus); #ifndef CONFIG_HOTPLUG_CPU - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); #endif } diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c index 4649a6ff0cf..772caffba22 100644 --- a/arch/sh/kernel/topology.c +++ b/arch/sh/kernel/topology.c @@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu) * Presently all SH-X3 SMP cores are multi-cores, so just keep it * simple until we have a method for determining topology.. */ - return cpu_possible_map; + return *cpu_possible_mask; } const struct cpumask *cpu_coregroup_mask(unsigned int cpu) diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c index ae08cbbfa56..949e2d3138a 100644 --- a/arch/sh/mm/cache-sh2a.c +++ b/arch/sh/mm/cache-sh2a.c @@ -23,6 +23,7 @@ #define MAX_OCACHE_PAGES 32 #define MAX_ICACHE_PAGES 32 +#ifdef CONFIG_CACHE_WRITEBACK static void sh2a_flush_oc_line(unsigned long v, int way) { unsigned long addr = (v & 0x000007f0) | (way << 11); @@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way) __raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr); } } +#endif static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v) { diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index a850b4d8d14..247904945d3 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size; extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); -extern void __math_state_restore(struct task_struct *); extern void math_state_restore(void); extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); +DECLARE_PER_CPU(struct task_struct *, fpu_owner_task); + extern user_regset_active_fn fpregs_active, xfpregs_active; extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get, xstateregs_get; @@ -269,6 +270,16 @@ static inline int fpu_restore_checking(struct fpu *fpu) static inline int restore_fpu_checking(struct task_struct *tsk) { + /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception + is pending. Clear the x87 state here by setting it to fixed + values. "m" is a random variable that should be in L1 */ + alternative_input( + ASM_NOP8 ASM_NOP2, + "emms\n\t" /* clear stack tags */ + "fildl %P[addr]", /* set F?P to defined value */ + X86_FEATURE_FXSAVE_LEAK, + [addr] "m" (tsk->thread.fpu.has_fpu)); + return fpu_restore_checking(&tsk->thread.fpu); } @@ -279,19 +290,21 @@ static inline int restore_fpu_checking(struct task_struct *tsk) */ static inline int __thread_has_fpu(struct task_struct *tsk) { - return tsk->thread.has_fpu; + return tsk->thread.fpu.has_fpu; } /* Must be paired with an 'stts' after! */ static inline void __thread_clear_has_fpu(struct task_struct *tsk) { - tsk->thread.has_fpu = 0; + tsk->thread.fpu.has_fpu = 0; + percpu_write(fpu_owner_task, NULL); } /* Must be paired with a 'clts' before! */ static inline void __thread_set_has_fpu(struct task_struct *tsk) { - tsk->thread.has_fpu = 1; + tsk->thread.fpu.has_fpu = 1; + percpu_write(fpu_owner_task, tsk); } /* @@ -336,30 +349,36 @@ typedef struct { int preload; } fpu_switch_t; * We don't do that yet, so "fpu_lazy_restore()" always returns * false, but some day.. */ -#define fpu_lazy_restore(tsk) (0) -#define fpu_lazy_state_intact(tsk) do { } while (0) +static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu) +{ + return new == percpu_read_stable(fpu_owner_task) && + cpu == new->thread.fpu.last_cpu; +} -static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new) +static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu) { fpu_switch_t fpu; fpu.preload = tsk_used_math(new) && new->fpu_counter > 5; if (__thread_has_fpu(old)) { - if (__save_init_fpu(old)) - fpu_lazy_state_intact(old); - __thread_clear_has_fpu(old); - old->fpu_counter++; + if (!__save_init_fpu(old)) + cpu = ~0; + old->thread.fpu.last_cpu = cpu; + old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */ /* Don't change CR0.TS if we just switch! */ if (fpu.preload) { + new->fpu_counter++; __thread_set_has_fpu(new); prefetch(new->thread.fpu.state); } else stts(); } else { old->fpu_counter = 0; + old->thread.fpu.last_cpu = ~0; if (fpu.preload) { - if (fpu_lazy_restore(new)) + new->fpu_counter++; + if (fpu_lazy_restore(new, cpu)) fpu.preload = 0; else prefetch(new->thread.fpu.state); @@ -377,8 +396,10 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta */ static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu) { - if (fpu.preload) - __math_state_restore(new); + if (fpu.preload) { + if (unlikely(restore_fpu_checking(new))) + __thread_fpu_end(new); + } } /* @@ -451,8 +472,10 @@ static inline void kernel_fpu_begin(void) __save_init_fpu(me); __thread_clear_has_fpu(me); /* We do 'stts()' in kernel_fpu_end() */ - } else + } else { + percpu_write(fpu_owner_task, NULL); clts(); + } } static inline void kernel_fpu_end(void) diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 096c975e099..461ce432b1c 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap) static inline void perf_events_lapic_init(void) { } #endif +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) + extern void amd_pmu_enable_virt(void); + extern void amd_pmu_disable_virt(void); +#else + static inline void amd_pmu_enable_virt(void) { } + static inline void amd_pmu_disable_virt(void) { } +#endif + #endif /* _ASM_X86_PERF_EVENT_H */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index f7c89e231c6..58545c97d07 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -374,6 +374,8 @@ union thread_xstate { }; struct fpu { + unsigned int last_cpu; + unsigned int has_fpu; union thread_xstate *state; }; @@ -454,7 +456,6 @@ struct thread_struct { unsigned long trap_no; unsigned long error_code; /* floating point and extended processor state */ - unsigned long has_fpu; struct fpu fpu; #ifdef CONFIG_X86_32 /* Virtual 86 mode info */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d43cad74f16..c0f7d68d318 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1044,6 +1044,9 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) = DEFINE_PER_CPU(unsigned int, irq_count) = -1; +DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); +EXPORT_PER_CPU_SYMBOL(fpu_owner_task); + /* * Special IST stacks which the CPU switches to when it calls * an IST-marked descriptor entry. Up to 7 stacks (hardware @@ -1111,6 +1114,8 @@ void debug_stack_reset(void) DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); +DEFINE_PER_CPU(struct task_struct *, fpu_owner_task); +EXPORT_PER_CPU_SYMBOL(fpu_owner_task); #ifdef CONFIG_CC_STACKPROTECTOR DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary); diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 6b45e5e7a90..73d08ed98a6 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb) l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } -static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, - int index) +static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index) { int node; @@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info); #define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y])) #ifdef CONFIG_SMP -static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) + +static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index) { - struct _cpuid4_info *this_leaf, *sibling_leaf; - unsigned long num_threads_sharing; - int index_msb, i, sibling; + struct _cpuid4_info *this_leaf; + int ret, i, sibling; struct cpuinfo_x86 *c = &cpu_data(cpu); - if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) { + ret = 0; + if (index == 3) { + ret = 1; for_each_cpu(i, cpu_llc_shared_mask(cpu)) { if (!per_cpu(ici_cpuid4_info, i)) continue; @@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) set_bit(sibling, this_leaf->shared_cpu_map); } } - return; + } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) { + ret = 1; + for_each_cpu(i, cpu_sibling_mask(cpu)) { + if (!per_cpu(ici_cpuid4_info, i)) + continue; + this_leaf = CPUID4_INFO_IDX(i, index); + for_each_cpu(sibling, cpu_sibling_mask(cpu)) { + if (!cpu_online(sibling)) + continue; + set_bit(sibling, this_leaf->shared_cpu_map); + } + } } + + return ret; +} + +static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + unsigned long num_threads_sharing; + int index_msb, i; + struct cpuinfo_x86 *c = &cpu_data(cpu); + + if (c->x86_vendor == X86_VENDOR_AMD) { + if (cache_shared_amd_cpu_map_setup(cpu, index)) + return; + } + this_leaf = CPUID4_INFO_IDX(cpu, index); num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 786e76a8632..e4eeaaf58a4 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) sprintf(name, "threshold_bank%i", bank); +#ifdef CONFIG_SMP if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ i = cpumask_first(cpu_llc_shared_mask(cpu)); @@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; } +#endif b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); if (!b) { diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 8944062f46e..c30c807ddc7 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -147,7 +147,9 @@ struct cpu_hw_events { /* * AMD specific bits */ - struct amd_nb *amd_nb; + struct amd_nb *amd_nb; + /* Inverted mask of bits to clear in the perf_ctr ctrl registers */ + u64 perf_ctr_virt_mask; void *kfree_on_online; }; @@ -417,9 +419,11 @@ void x86_pmu_disable_all(void); static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc, u64 enable_mask) { + u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask); + if (hwc->extra_reg.reg) wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config); - wrmsrl(hwc->config_base, hwc->config | enable_mask); + wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask); } void x86_pmu_enable_all(int added); diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 0397b23be8e..67250a52430 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -1,4 +1,5 @@ #include <linux/perf_event.h> +#include <linux/export.h> #include <linux/types.h> #include <linux/init.h> #include <linux/slab.h> @@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu) struct amd_nb *nb; int i, nb_id; - if (boot_cpu_data.x86_max_cores < 2) + cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; + + if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15) return; nb_id = amd_get_nb_id(cpu); @@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { .put_event_constraints = amd_put_event_constraints, .cpu_prepare = amd_pmu_cpu_prepare, - .cpu_starting = amd_pmu_cpu_starting, .cpu_dead = amd_pmu_cpu_dead, #endif + .cpu_starting = amd_pmu_cpu_starting, }; __init int amd_pmu_init(void) @@ -621,3 +624,33 @@ __init int amd_pmu_init(void) return 0; } + +void amd_pmu_enable_virt(void) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + cpuc->perf_ctr_virt_mask = 0; + + /* Reload all events */ + x86_pmu_disable_all(); + x86_pmu_enable_all(0); +} +EXPORT_SYMBOL_GPL(amd_pmu_enable_virt); + +void amd_pmu_disable_virt(void) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + /* + * We only mask out the Host-only bit so that host-only counting works + * when SVM is disabled. If someone sets up a guest-only counter when + * SVM is disabled the Guest-only bits still gets set and the counter + * will not count anything. + */ + cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY; + + /* Reload all events */ + x86_pmu_disable_all(); + x86_pmu_enable_all(0); +} +EXPORT_SYMBOL_GPL(amd_pmu_disable_virt); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 3fe8239fd8f..1333d985177 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1532,10 +1532,17 @@ ENTRY(nmi) pushq_cfi %rdx /* + * If %cs was not the kernel segment, then the NMI triggered in user + * space, which means it is definitely not nested. + */ + cmpl $__KERNEL_CS, 16(%rsp) + jne first_nmi + + /* * Check the special variable on the stack to see if NMIs are * executing. */ - cmp $1, -8(%rsp) + cmpl $1, -8(%rsp) je nested_nmi /* diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index ac0417be913..73465aab28f 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -360,7 +360,6 @@ out: static enum ucode_state request_microcode_user(int cpu, const void __user *buf, size_t size) { - pr_info("AMD microcode update via /dev/cpu/microcode not supported\n"); return UCODE_ERROR; } diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 80bfe1ab003..c08d1ff12b7 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -214,6 +214,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, task_user_gs(p) = get_user_gs(regs); + p->fpu_counter = 0; p->thread.io_bitmap_ptr = NULL; tsk = current; err = -ENOMEM; @@ -303,7 +304,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ - fpu = switch_fpu_prepare(prev_p, next_p); + fpu = switch_fpu_prepare(prev_p, next_p, cpu); /* * Reload esp0. diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 1fd94bc4279..cfa5c90c01d 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -286,6 +286,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, set_tsk_thread_flag(p, TIF_FORK); + p->fpu_counter = 0; p->thread.io_bitmap_ptr = NULL; savesegment(gs, p->thread.gsindex); @@ -388,7 +389,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) unsigned fsindex, gsindex; fpu_switch_t fpu; - fpu = switch_fpu_prepare(prev_p, next_p); + fpu = switch_fpu_prepare(prev_p, next_p, cpu); /* * Reload esp0, LDT and the page table pointer: diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 77da5b475ad..4bbe04d9674 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -571,37 +571,6 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void) } /* - * This gets called with the process already owning the - * FPU state, and with CR0.TS cleared. It just needs to - * restore the FPU register state. - */ -void __math_state_restore(struct task_struct *tsk) -{ - /* We need a safe address that is cheap to find and that is already - in L1. We've just brought in "tsk->thread.has_fpu", so use that */ -#define safe_address (tsk->thread.has_fpu) - - /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception - is pending. Clear the x87 state here by setting it to fixed - values. safe_address is a random variable that should be in L1 */ - alternative_input( - ASM_NOP8 ASM_NOP2, - "emms\n\t" /* clear stack tags */ - "fildl %P[addr]", /* set F?P to defined value */ - X86_FEATURE_FXSAVE_LEAK, - [addr] "m" (safe_address)); - - /* - * Paranoid restore. send a SIGSEGV if we fail to restore the state. - */ - if (unlikely(restore_fpu_checking(tsk))) { - __thread_fpu_end(tsk); - force_sig(SIGSEGV, tsk); - return; - } -} - -/* * 'math_state_restore()' saves the current math information in the * old math state array, and gets the new ones from the current task * @@ -631,7 +600,14 @@ void math_state_restore(void) } __thread_fpu_begin(tsk); - __math_state_restore(tsk); + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(tsk))) { + __thread_fpu_end(tsk); + force_sig(SIGSEGV, tsk); + return; + } tsk->fpu_counter++; } diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 5fa553babe5..e385214711c 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -29,6 +29,7 @@ #include <linux/ftrace_event.h> #include <linux/slab.h> +#include <asm/perf_event.h> #include <asm/tlbflush.h> #include <asm/desc.h> #include <asm/kvm_para.h> @@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage) wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT); cpu_svm_disable(); + + amd_pmu_disable_virt(); } static int svm_hardware_enable(void *garbage) @@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage) svm_init_erratum_383(); + amd_pmu_enable_virt(); + return 0; } diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 12eb07bfb26..4172af8ceeb 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void) /* Prevent unwanted bits from being set in PTEs. */ __supported_pte_mask &= ~_PAGE_GLOBAL; +#if 0 if (!xen_initial_domain()) +#endif __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); __supported_pte_mask |= _PAGE_IOMAP; @@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void) pgd = (pgd_t *)xen_start_info->pt_base; - if (!xen_initial_domain()) - __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); - - __supported_pte_mask |= _PAGE_IOMAP; /* Don't do the full vcpu_info placement stuff until we have a possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 58a0e46c404..95c1cf60c66 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val) static pteval_t xen_pte_val(pte_t pte) { pteval_t pteval = pte.pte; - +#if 0 /* If this is a WC pte, convert back from Xen WC to Linux WC */ if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) { WARN_ON(!pat_enabled); pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT; } - +#endif if (xen_initial_domain() && (pteval & _PAGE_IOMAP)) return pteval; @@ -463,7 +463,7 @@ void xen_set_pat(u64 pat) static pte_t xen_make_pte(pteval_t pte) { phys_addr_t addr = (pte & PTE_PFN_MASK); - +#if 0 /* If Linux is trying to set a WC pte, then map to the Xen WC. * If _PAGE_PAT is set, then it probably means it is really * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope @@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte) if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT) pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT; } - +#endif /* * Unprivileged domains are allowed to do IOMAPpings for * PCI passthrough, but not map ISA space. The ISA diff --git a/block/partitions/ldm.c b/block/partitions/ldm.c index bd8ae788f68..e507cfbd044 100644 --- a/block/partitions/ldm.c +++ b/block/partitions/ldm.c @@ -2,7 +2,7 @@ * ldm - Support for Windows Logical Disk Manager (Dynamic Disks) * * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org> - * Copyright (c) 2001-2007 Anton Altaparmakov + * Copyright (c) 2001-2012 Anton Altaparmakov * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> * * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads @@ -1341,20 +1341,17 @@ found: ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num); return false; } - if (f->map & (1 << rec)) { ldm_error ("Duplicate VBLK, part %d.", rec); f->map &= 0x7F; /* Mark the group as broken */ return false; } - f->map |= (1 << rec); - + if (!rec) + memcpy(f->data, data, VBLK_SIZE_HEAD); data += VBLK_SIZE_HEAD; size -= VBLK_SIZE_HEAD; - - memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size); - + memcpy(f->data + VBLK_SIZE_HEAD + rec * size, data, size); return true; } diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 54eaf96ab21..01c2cf4efcd 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -497,37 +497,22 @@ static void amba_device_release(struct device *dev) } /** - * amba_device_register - register an AMBA device - * @dev: AMBA device to register - * @parent: parent memory resource + * amba_device_add - add a previously allocated AMBA device structure + * @dev: AMBA device allocated by amba_device_alloc + * @parent: resource parent for this devices resources * - * Setup the AMBA device, reading the cell ID if present. - * Claim the resource, and register the AMBA device with - * the Linux device manager. + * Claim the resource, and read the device cell ID if not already + * initialized. Register the AMBA device with the Linux device + * manager. */ -int amba_device_register(struct amba_device *dev, struct resource *parent) +int amba_device_add(struct amba_device *dev, struct resource *parent) { u32 size; void __iomem *tmp; int i, ret; - device_initialize(&dev->dev); - - /* - * Copy from device_add - */ - if (dev->dev.init_name) { - dev_set_name(&dev->dev, "%s", dev->dev.init_name); - dev->dev.init_name = NULL; - } - - dev->dev.release = amba_device_release; - dev->dev.bus = &amba_bustype; - dev->dev.dma_mask = &dev->dma_mask; - dev->res.name = dev_name(&dev->dev); - - if (!dev->dev.coherent_dma_mask && dev->dma_mask) - dev_warn(&dev->dev, "coherent dma mask is unset\n"); + WARN_ON(dev->irq[0] == (unsigned int)-1); + WARN_ON(dev->irq[1] == (unsigned int)-1); ret = request_resource(parent, &dev->res); if (ret) @@ -582,9 +567,9 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_release; - if (dev->irq[0] != NO_IRQ) + if (dev->irq[0] && dev->irq[0] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq0); - if (ret == 0 && dev->irq[1] != NO_IRQ) + if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ) ret = device_create_file(&dev->dev, &dev_attr_irq1); if (ret == 0) return ret; @@ -596,6 +581,74 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) err_out: return ret; } +EXPORT_SYMBOL_GPL(amba_device_add); + +static void amba_device_initialize(struct amba_device *dev, const char *name) +{ + device_initialize(&dev->dev); + if (name) + dev_set_name(&dev->dev, "%s", name); + dev->dev.release = amba_device_release; + dev->dev.bus = &amba_bustype; + dev->dev.dma_mask = &dev->dma_mask; + dev->res.name = dev_name(&dev->dev); +} + +/** + * amba_device_alloc - allocate an AMBA device + * @name: sysfs name of the AMBA device + * @base: base of AMBA device + * @size: size of AMBA device + * + * Allocate and initialize an AMBA device structure. Returns %NULL + * on failure. + */ +struct amba_device *amba_device_alloc(const char *name, resource_size_t base, + size_t size) +{ + struct amba_device *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev) { + amba_device_initialize(dev, name); + dev->res.start = base; + dev->res.end = base + size - 1; + dev->res.flags = IORESOURCE_MEM; + } + + return dev; +} +EXPORT_SYMBOL_GPL(amba_device_alloc); + +/** + * amba_device_register - register an AMBA device + * @dev: AMBA device to register + * @parent: parent memory resource + * + * Setup the AMBA device, reading the cell ID if present. + * Claim the resource, and register the AMBA device with + * the Linux device manager. + */ +int amba_device_register(struct amba_device *dev, struct resource *parent) +{ + amba_device_initialize(dev, dev->dev.init_name); + dev->dev.init_name = NULL; + + if (!dev->dev.coherent_dma_mask && dev->dma_mask) + dev_warn(&dev->dev, "coherent dma mask is unset\n"); + + return amba_device_add(dev, parent); +} + +/** + * amba_device_put - put an AMBA device + * @dev: AMBA device to put + */ +void amba_device_put(struct amba_device *dev) +{ + put_device(&dev->dev); +} +EXPORT_SYMBOL_GPL(amba_device_put); /** * amba_device_unregister - unregister an AMBA device diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 5d1d0764513..e8cd652d201 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) out_unmap_both: pci_set_drvdata(dev, NULL); - pci_iounmap(dev, card->config_regs); - out_unmap_config: pci_iounmap(dev, card->buffers); + out_unmap_config: + pci_iounmap(dev, card->config_regs); out_release_regions: pci_release_regions(dev); out: diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c index c1dc4d86c22..1f3c1a7d132 100644 --- a/drivers/block/nvme.c +++ b/drivers/block/nvme.c @@ -41,6 +41,8 @@ #include <linux/types.h> #include <linux/version.h> +#include <asm-generic/io-64-nonatomic-lo-hi.h> + #define NVME_Q_DEPTH 1024 #define SQ_SIZE(depth) (depth * sizeof(struct nvme_command)) #define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion)) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f00f596c102..789c9b579ae 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0a5c, 0x21e3) }, + { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, { } /* Terminating entry */ @@ -726,9 +727,6 @@ static int btusb_send_frame(struct sk_buff *skb) usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_tx_complete, skb); - if (skb->priority >= HCI_PRIO_MAX - 1) - urb->transfer_flags = URB_ISO_ASAP; - hdev->stat.acl_tx++; break; diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 55d0f95f82f..32cb929b8eb 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -19,6 +19,8 @@ * - Two channels combine to create a free-running 32 bit counter * with a base rate of 5+ MHz, packaged as a clocksource (with * resolution better than 200 nsec). + * - Some chips support 32 bit counter. A single channel is used for + * this 32 bit free-running counter. the second channel is not used. * * - The third channel may be used to provide a 16-bit clockevent * source, used in either periodic or oneshot mode. This runs @@ -54,6 +56,11 @@ static cycle_t tc_get_cycles(struct clocksource *cs) return (upper << 16) | lower; } +static cycle_t tc_get_cycles32(struct clocksource *cs) +{ + return __raw_readl(tcaddr + ATMEL_TC_REG(0, CV)); +} + static struct clocksource clksrc = { .name = "tcb_clksrc", .rating = 200, @@ -209,6 +216,48 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) #endif +static void __init tcb_setup_dual_chan(struct atmel_tc *tc, int mck_divisor_idx) +{ + /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */ + __raw_writel(mck_divisor_idx /* likely divide-by-8 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP /* free-run */ + | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */ + | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */ + tcaddr + ATMEL_TC_REG(0, CMR)); + __raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA)); + __raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC)); + __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */ + __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR)); + + /* channel 1: waveform mode, input TIOA0 */ + __raw_writel(ATMEL_TC_XC1 /* input: TIOA0 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP, /* free-run */ + tcaddr + ATMEL_TC_REG(1, CMR)); + __raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */ + __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR)); + + /* chain channel 0 to channel 1*/ + __raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR); + /* then reset all the timers */ + __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); +} + +static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idx) +{ + /* channel 0: waveform mode, input mclk/8 */ + __raw_writel(mck_divisor_idx /* likely divide-by-8 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP, /* free-run */ + tcaddr + ATMEL_TC_REG(0, CMR)); + __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */ + __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR)); + + /* then reset all the timers */ + __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); +} + static int __init tcb_clksrc_init(void) { static char bootinfo[] __initdata @@ -260,34 +309,19 @@ static int __init tcb_clksrc_init(void) divided_rate / 1000000, ((divided_rate + 500000) % 1000000) / 1000); - /* tclib will give us three clocks no matter what the - * underlying platform supports. - */ - clk_enable(tc->clk[1]); - - /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */ - __raw_writel(best_divisor_idx /* likely divide-by-8 */ - | ATMEL_TC_WAVE - | ATMEL_TC_WAVESEL_UP /* free-run */ - | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */ - | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */ - tcaddr + ATMEL_TC_REG(0, CMR)); - __raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA)); - __raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC)); - __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */ - __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR)); - - /* channel 1: waveform mode, input TIOA0 */ - __raw_writel(ATMEL_TC_XC1 /* input: TIOA0 */ - | ATMEL_TC_WAVE - | ATMEL_TC_WAVESEL_UP, /* free-run */ - tcaddr + ATMEL_TC_REG(1, CMR)); - __raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */ - __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR)); - - /* chain channel 0 to channel 1, then reset all the timers */ - __raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR); - __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); + if (tc->tcb_config && tc->tcb_config->counter_width == 32) { + /* use apropriate function to read 32 bit counter */ + clksrc.read = tc_get_cycles32; + /* setup ony channel 0 */ + tcb_setup_single_chan(tc, best_divisor_idx); + } else { + /* tclib will give us three clocks no matter what the + * underlying platform supports. + */ + clk_enable(tc->clk[1]); + /* setup both channel 0 & 1 */ + tcb_setup_dual_chan(tc, best_divisor_idx); + } /* and away we go! */ clocksource_register_hz(&clksrc, divided_rate); diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 7dbc4a83c45..78a666d1e5f 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -1,7 +1,7 @@ config CPU_IDLE bool "CPU idle PM support" - default ACPI + default y if ACPI || PPC_PSERIES help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform diff --git a/drivers/crypto/mv_cesa.c b/drivers/crypto/mv_cesa.c index 597235a2f8f..0d40cf66b3c 100644 --- a/drivers/crypto/mv_cesa.c +++ b/drivers/crypto/mv_cesa.c @@ -714,6 +714,7 @@ static int mv_hash_final(struct ahash_request *req) { struct mv_req_hash_ctx *ctx = ahash_request_ctx(req); + ahash_request_set_crypt(req, NULL, req->result, 0); mv_update_hash_req_ctx(ctx, 1, 0); return mv_handle_req(&req->base); } diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index aa08497a075..73f55e2008c 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -15,6 +15,8 @@ #include <linux/io.h> #include "edac_core.h" +#include <asm-generic/io-64-nonatomic-lo-hi.h> + #define I3200_REVISION "1.1" #define EDAC_MOD_STR "i3200_edac" @@ -101,19 +103,6 @@ struct i3200_priv { static int nr_channels; -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - static int how_many_channels(struct pci_dev *pdev) { unsigned char capid0_8b; /* 8th byte of CAPID0 */ diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c index d620b078425..618bd4d87d2 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_connector.c +++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c @@ -28,6 +28,7 @@ #include "drmP.h" #include "drm_crtc_helper.h" +#include <drm/exynos_drm.h> #include "exynos_drm_drv.h" #include "exynos_drm_encoder.h" @@ -44,8 +45,9 @@ struct exynos_drm_connector { /* convert exynos_video_timings to drm_display_mode */ static inline void convert_to_display_mode(struct drm_display_mode *mode, - struct fb_videomode *timing) + struct exynos_drm_panel_info *panel) { + struct fb_videomode *timing = &panel->timing; DRM_DEBUG_KMS("%s\n", __FILE__); mode->clock = timing->pixclock / 1000; @@ -60,6 +62,8 @@ convert_to_display_mode(struct drm_display_mode *mode, mode->vsync_start = mode->vdisplay + timing->upper_margin; mode->vsync_end = mode->vsync_start + timing->vsync_len; mode->vtotal = mode->vsync_end + timing->lower_margin; + mode->width_mm = panel->width_mm; + mode->height_mm = panel->height_mm; if (timing->vmode & FB_VMODE_INTERLACED) mode->flags |= DRM_MODE_FLAG_INTERLACE; @@ -148,16 +152,18 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector) connector->display_info.raw_edid = edid; } else { struct drm_display_mode *mode = drm_mode_create(connector->dev); - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; - if (display_ops->get_timing) - timing = display_ops->get_timing(manager->dev); + if (display_ops->get_panel) + panel = display_ops->get_panel(manager->dev); else { drm_mode_destroy(connector->dev, mode); return 0; } - convert_to_display_mode(mode, timing); + convert_to_display_mode(mode, panel); + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 661a03571d0..d08a55896d5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -193,6 +193,9 @@ int exynos_drm_subdrv_register(struct exynos_drm_subdrv *subdrv) return err; } + /* setup possible_clones. */ + exynos_drm_encoder_setup(drm_dev); + /* * if any specific driver such as fimd or hdmi driver called * exynos_drm_subdrv_register() later than drm_load(), diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e3861ac4929..de818831a51 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -307,9 +307,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, */ event->pipe = exynos_crtc->pipe; - list_add_tail(&event->base.link, - &dev_priv->pageflip_event_list); - ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); @@ -318,6 +315,9 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, goto out; } + list_add_tail(&event->base.link, + &dev_priv->pageflip_event_list); + crtc->fb = fb; ret = exynos_drm_crtc_update(crtc); if (ret) { diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 35889ca255e..58820ebd355 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -33,6 +33,7 @@ #include "exynos_drm_drv.h" #include "exynos_drm_crtc.h" +#include "exynos_drm_encoder.h" #include "exynos_drm_fbdev.h" #include "exynos_drm_fb.h" #include "exynos_drm_gem.h" @@ -99,6 +100,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags) if (ret) goto err_vblank; + /* setup possible_clones. */ + exynos_drm_encoder_setup(dev); + /* * create and configure fb helper and also exynos specific * fbdev object. @@ -141,16 +145,21 @@ static int exynos_drm_unload(struct drm_device *dev) } static void exynos_drm_preclose(struct drm_device *dev, - struct drm_file *file_priv) + struct drm_file *file) { - struct exynos_drm_private *dev_priv = dev->dev_private; + DRM_DEBUG_DRIVER("%s\n", __FILE__); - /* - * drm framework frees all events at release time, - * so private event list should be cleared. - */ - if (!list_empty(&dev_priv->pageflip_event_list)) - INIT_LIST_HEAD(&dev_priv->pageflip_event_list); +} + +static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file) +{ + DRM_DEBUG_DRIVER("%s\n", __FILE__); + + if (!file->driver_priv) + return; + + kfree(file->driver_priv); + file->driver_priv = NULL; } static void exynos_drm_lastclose(struct drm_device *dev) @@ -195,6 +204,7 @@ static struct drm_driver exynos_drm_driver = { .unload = exynos_drm_unload, .preclose = exynos_drm_preclose, .lastclose = exynos_drm_lastclose, + .postclose = exynos_drm_postclose, .get_vblank_counter = drm_vblank_count, .enable_vblank = exynos_drm_crtc_enable_vblank, .disable_vblank = exynos_drm_crtc_disable_vblank, diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index e685e1e3305..13540de90bf 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -136,7 +136,7 @@ struct exynos_drm_overlay { * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI. * @is_connected: check for that display is connected or not. * @get_edid: get edid modes from display driver. - * @get_timing: get timing object from display driver. + * @get_panel: get panel object from display driver. * @check_timing: check if timing is valid or not. * @power_on: display device on or off. */ @@ -145,7 +145,7 @@ struct exynos_drm_display_ops { bool (*is_connected)(struct device *dev); int (*get_edid)(struct device *dev, struct drm_connector *connector, u8 *edid, int len); - void *(*get_timing)(struct device *dev); + void *(*get_panel)(struct device *dev); int (*check_timing)(struct device *dev, void *timing); int (*power_on)(struct device *dev, int mode); }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 86b93dde219..ef4754f1519 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -195,6 +195,40 @@ static struct drm_encoder_funcs exynos_encoder_funcs = { .destroy = exynos_drm_encoder_destroy, }; +static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder) +{ + struct drm_encoder *clone; + struct drm_device *dev = encoder->dev; + struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder); + struct exynos_drm_display_ops *display_ops = + exynos_encoder->manager->display_ops; + unsigned int clone_mask = 0; + int cnt = 0; + + list_for_each_entry(clone, &dev->mode_config.encoder_list, head) { + switch (display_ops->type) { + case EXYNOS_DISPLAY_TYPE_LCD: + case EXYNOS_DISPLAY_TYPE_HDMI: + clone_mask |= (1 << (cnt++)); + break; + default: + continue; + } + } + + return clone_mask; +} + +void exynos_drm_encoder_setup(struct drm_device *dev) +{ + struct drm_encoder *encoder; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + encoder->possible_clones = exynos_drm_encoder_clones(encoder); +} + struct drm_encoder * exynos_drm_encoder_create(struct drm_device *dev, struct exynos_drm_manager *manager, diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h index 97b087a51cb..eb7d2316847 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h @@ -30,6 +30,7 @@ struct exynos_drm_manager; +void exynos_drm_encoder_setup(struct drm_device *dev); struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev, struct exynos_drm_manager *mgr, unsigned int possible_crtcs); diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index d7ae29d2f3d..3508700e529 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -195,66 +195,6 @@ out: return ret; } -static bool -exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb, - struct drm_fb_helper_surface_size *sizes) -{ - if (fb->width != sizes->surface_width) - return false; - if (fb->height != sizes->surface_height) - return false; - if (fb->bits_per_pixel != sizes->surface_bpp) - return false; - if (fb->depth != sizes->surface_depth) - return false; - - return true; -} - -static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper, - struct drm_fb_helper_surface_size *sizes) -{ - struct drm_device *dev = helper->dev; - struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper); - struct exynos_drm_gem_obj *exynos_gem_obj; - struct drm_framebuffer *fb = helper->fb; - struct drm_mode_fb_cmd2 mode_cmd = { 0 }; - unsigned long size; - - DRM_DEBUG_KMS("%s\n", __FILE__); - - if (exynos_drm_fbdev_is_samefb(fb, sizes)) - return 0; - - mode_cmd.width = sizes->surface_width; - mode_cmd.height = sizes->surface_height; - mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3); - mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, - sizes->surface_depth); - - if (exynos_fbdev->exynos_gem_obj) - exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj); - - if (fb->funcs->destroy) - fb->funcs->destroy(fb); - - size = mode_cmd.pitches[0] * mode_cmd.height; - exynos_gem_obj = exynos_drm_gem_create(dev, size); - if (IS_ERR(exynos_gem_obj)) - return PTR_ERR(exynos_gem_obj); - - exynos_fbdev->exynos_gem_obj = exynos_gem_obj; - - helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, - &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { - DRM_ERROR("failed to create drm framebuffer.\n"); - return PTR_ERR(helper->fb); - } - - return exynos_drm_fbdev_update(helper, helper->fb); -} - static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, struct drm_fb_helper_surface_size *sizes) { @@ -262,6 +202,10 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, DRM_DEBUG_KMS("%s\n", __FILE__); + /* + * with !helper->fb, it means that this funcion is called first time + * and after that, the helper->fb would be used as clone mode. + */ if (!helper->fb) { ret = exynos_drm_fbdev_create(helper, sizes); if (ret < 0) { @@ -274,12 +218,6 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, * because register_framebuffer() should be called. */ ret = 1; - } else { - ret = exynos_drm_fbdev_recreate(helper, sizes); - if (ret < 0) { - DRM_ERROR("failed to reconfigure fbdev\n"); - return ret; - } } return ret; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index b6a737d196a..360adf2bba0 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -89,7 +89,7 @@ struct fimd_context { bool suspended; struct mutex lock; - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; }; static bool fimd_display_is_connected(struct device *dev) @@ -101,13 +101,13 @@ static bool fimd_display_is_connected(struct device *dev) return true; } -static void *fimd_get_timing(struct device *dev) +static void *fimd_get_panel(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); DRM_DEBUG_KMS("%s\n", __FILE__); - return ctx->timing; + return ctx->panel; } static int fimd_check_timing(struct device *dev, void *timing) @@ -131,7 +131,7 @@ static int fimd_display_power_on(struct device *dev, int mode) static struct exynos_drm_display_ops fimd_display_ops = { .type = EXYNOS_DISPLAY_TYPE_LCD, .is_connected = fimd_display_is_connected, - .get_timing = fimd_get_timing, + .get_panel = fimd_get_panel, .check_timing = fimd_check_timing, .power_on = fimd_display_power_on, }; @@ -193,7 +193,8 @@ static void fimd_apply(struct device *subdrv_dev) static void fimd_commit(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - struct fb_videomode *timing = ctx->timing; + struct exynos_drm_panel_info *panel = ctx->panel; + struct fb_videomode *timing = &panel->timing; u32 val; if (ctx->suspended) @@ -604,7 +605,12 @@ static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc) } if (is_checked) { - drm_vblank_put(drm_dev, crtc); + /* + * call drm_vblank_put only in case that drm_vblank_get was + * called. + */ + if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0) + drm_vblank_put(drm_dev, crtc); /* * don't off vblank if vblank_disable_allowed is 1, @@ -781,7 +787,7 @@ static int __devinit fimd_probe(struct platform_device *pdev) struct fimd_context *ctx; struct exynos_drm_subdrv *subdrv; struct exynos_drm_fimd_pdata *pdata; - struct fb_videomode *timing; + struct exynos_drm_panel_info *panel; struct resource *res; int win; int ret = -EINVAL; @@ -794,9 +800,9 @@ static int __devinit fimd_probe(struct platform_device *pdev) return -EINVAL; } - timing = &pdata->timing; - if (!timing) { - dev_err(dev, "timing is null.\n"); + panel = &pdata->panel; + if (!panel) { + dev_err(dev, "panel is null.\n"); return -EINVAL; } @@ -858,16 +864,16 @@ static int __devinit fimd_probe(struct platform_device *pdev) goto err_req_irq; } - ctx->clkdiv = fimd_calc_clkdiv(ctx, timing); + ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing); ctx->vidcon0 = pdata->vidcon0; ctx->vidcon1 = pdata->vidcon1; ctx->default_win = pdata->default_win; - ctx->timing = timing; + ctx->panel = panel; - timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv; + panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv; DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n", - timing->pixclock, ctx->clkdiv); + panel->timing.pixclock, ctx->clkdiv); subdrv = &ctx->subdrv; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ac24cff3977..93846e810e3 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -712,7 +712,12 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc) } if (is_checked) - drm_vblank_put(drm_dev, crtc); + /* + * call drm_vblank_put only in case that drm_vblank_get was + * called. + */ + if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0) + drm_vblank_put(drm_dev, crtc); spin_unlock_irqrestore(&drm_dev->event_lock, flags); } @@ -779,15 +784,15 @@ static void mixer_win_reset(struct mixer_context *ctx) mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST, MXR_STATUS_BURST_MASK); - /* setting default layer priority: layer1 > video > layer0 + /* setting default layer priority: layer1 > layer0 > video * because typical usage scenario would be + * layer1 - OSD * layer0 - framebuffer * video - video overlay - * layer1 - OSD */ - val = MXR_LAYER_CFG_GRP0_VAL(1); - val |= MXR_LAYER_CFG_VP_VAL(2); - val |= MXR_LAYER_CFG_GRP1_VAL(3); + val = MXR_LAYER_CFG_GRP1_VAL(3); + val |= MXR_LAYER_CFG_GRP0_VAL(2); + val |= MXR_LAYER_CFG_VP_VAL(1); mixer_reg_write(res, MXR_LAYER_CFG, val); /* setting background color */ @@ -1044,7 +1049,7 @@ static int mixer_remove(struct platform_device *pdev) platform_get_drvdata(pdev); struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx; - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); mixer_resource_poweroff(ctx); mixer_resources_cleanup(ctx); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c3afb783cb9..03c53fcf865 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3028,6 +3028,20 @@ #define DISP_TILE_SURFACE_SWIZZLING (1<<13) #define DISP_FBC_WM_DIS (1<<15) +/* GEN7 chicken */ +#define GEN7_COMMON_SLICE_CHICKEN1 0x7010 +# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) + +#define GEN7_L3CNTLREG1 0xB01C +#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C + +#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030 +#define GEN7_WA_L3_CHICKEN_MODE 0x20000000 + +/* WaCatErrorRejectionIssue */ +#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 +#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) + /* PCH */ /* south display engine interrupt */ @@ -3618,6 +3632,7 @@ #define GT_FIFO_NUM_RESERVED_ENTRIES 20 #define GEN6_UCGCTL2 0x9404 +# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 00fbff5ddd8..f851db7be2c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4680,8 +4680,17 @@ sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane, crtc = intel_get_crtc_for_plane(dev, plane); clock = crtc->mode.clock; + if (!clock) { + *sprite_wm = 0; + return false; + } line_time_us = (sprite_width * 1000) / clock; + if (!line_time_us) { + *sprite_wm = 0; + return false; + } + line_count = (latency_ns / line_time_us + 1000) / 1000; line_size = sprite_width * pixel_size; @@ -6175,7 +6184,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) int i; /* The clocks have to be on to load the palette. */ - if (!crtc->enabled) + if (!crtc->enabled || !intel_crtc->active) return; /* use legacy palette for Ironlake */ @@ -6561,7 +6570,7 @@ intel_framebuffer_create_for_mode(struct drm_device *dev, mode_cmd.height = mode->vdisplay; mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp); - mode_cmd.pixel_format = 0; + mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); return intel_framebuffer_create(dev, &mode_cmd, obj); } @@ -8184,8 +8193,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ if (intel_enable_rc6(dev_priv->dev)) - rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | - GEN6_RC_CTL_RC6_ENABLE; + rc6_mask = GEN6_RC_CTL_RC6_ENABLE | + ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0); I915_WRITE(GEN6_RC_CONTROL, rc6_mask | @@ -8463,12 +8472,32 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating workaround. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); I915_WRITE(IVB_CHICKEN3, CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | CHICKEN3_DGMG_DONE_FIX_DISABLE); + /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */ + I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, + GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); + + /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ + I915_WRITE(GEN7_L3CNTLREG1, + GEN7_WA_FOR_GEN7_L3_CONTROL); + I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, + GEN7_WA_L3_CHICKEN_MODE); + + /* This is required by WaCatErrorRejectionIssue */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + for_each_pipe(pipe) { I915_WRITE(DSPCNTR(pipe), I915_READ(DSPCNTR(pipe)) | diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 1ab842c6032..536191540b0 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -301,7 +301,7 @@ static int init_ring_common(struct intel_ring_buffer *ring) I915_WRITE_CTL(ring, ((ring->size - PAGE_SIZE) & RING_NR_PAGES) - | RING_REPORT_64K | RING_VALID); + | RING_VALID); /* If the head is still not zero, the ring is dead */ if ((I915_READ_CTL(ring) & RING_VALID) == 0 || @@ -1132,18 +1132,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) struct drm_device *dev = ring->dev; struct drm_i915_private *dev_priv = dev->dev_private; unsigned long end; - u32 head; - - /* If the reported head position has wrapped or hasn't advanced, - * fallback to the slow and accurate path. - */ - head = intel_read_status_page(ring, 4); - if (head > ring->head) { - ring->head = head; - ring->space = ring_space(ring); - if (ring->space >= n) - return 0; - } trace_i915_ring_wait_begin(ring); if (drm_core_check_feature(dev, DRIVER_GEM)) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 9be353b894c..f58254a3fb0 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3223,6 +3223,7 @@ int evergreen_resume(struct radeon_device *rdev) r = evergreen_startup(rdev); if (r) { DRM_ERROR("evergreen startup failed on resume\n"); + rdev->accel_working = false; return r; } diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index db09065e68f..2509c505acb 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1547,6 +1547,7 @@ int cayman_resume(struct radeon_device *rdev) r = cayman_startup(rdev); if (r) { DRM_ERROR("cayman startup failed on resume\n"); + rdev->accel_working = false; return r; } return r; diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 18cd84fae99..333cde9d4e7 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3928,6 +3928,8 @@ static int r100_startup(struct radeon_device *rdev) int r100_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_disable(rdev); @@ -3947,7 +3949,11 @@ int r100_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r100_startup(rdev); + r = r100_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r100_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 3fc0d29a5f3..6829638cca4 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1431,6 +1431,8 @@ static int r300_startup(struct radeon_device *rdev) int r300_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -1452,7 +1454,11 @@ int r300_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r300_startup(rdev); + r = r300_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r300_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 666e28fe509..b14323053ba 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -291,6 +291,8 @@ static int r420_startup(struct radeon_device *rdev) int r420_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -316,7 +318,11 @@ int r420_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r420_startup(rdev); + r = r420_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r420_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 4ae1615e752..25084e824db 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -218,6 +218,8 @@ static int r520_startup(struct radeon_device *rdev) int r520_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -237,7 +239,11 @@ int r520_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r520_startup(rdev); + r = r520_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r520_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 4f08e5e6ee9..fbcd84803b6 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2529,6 +2529,7 @@ int r600_resume(struct radeon_device *rdev) r = r600_startup(rdev); if (r) { DRM_ERROR("r600 startup failed on resume\n"); + rdev->accel_working = false; return r; } diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 38ce5d0427e..387fcc9f03e 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1304,6 +1304,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx, h0 = G_038004_TEX_HEIGHT(word1) + 1; d0 = G_038004_TEX_DEPTH(word1); nfaces = 1; + array = 0; switch (G_038000_DIM(word0)) { case V_038000_SQ_TEX_DIM_1D: case V_038000_SQ_TEX_DIM_2D: diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 9e72daeeddc..1f53ae74ada 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -3020,6 +3020,9 @@ radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); uint32_t bios_2_scratch; + if (ASIC_IS_DCE4(rdev)) + return; + if (rdev->family >= CHIP_R600) bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH); else diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e7cb3ab0924..8b3d8ed52ff 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1117,13 +1117,23 @@ static int radeon_dp_get_modes(struct drm_connector *connector) (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) { struct drm_display_mode *mode; - if (!radeon_dig_connector->edp_on) - atombios_set_edp_panel_power(connector, - ATOM_TRANSMITTER_ACTION_POWER_ON); - ret = radeon_ddc_get_modes(radeon_connector); - if (!radeon_dig_connector->edp_on) - atombios_set_edp_panel_power(connector, - ATOM_TRANSMITTER_ACTION_POWER_OFF); + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + if (!radeon_dig_connector->edp_on) + atombios_set_edp_panel_power(connector, + ATOM_TRANSMITTER_ACTION_POWER_ON); + ret = radeon_ddc_get_modes(radeon_connector); + if (!radeon_dig_connector->edp_on) + atombios_set_edp_panel_power(connector, + ATOM_TRANSMITTER_ACTION_POWER_OFF); + } else { + /* need to setup ddc on the bridge */ + if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) != + ENCODER_OBJECT_ID_NONE) { + if (encoder) + radeon_atom_ext_encoder_setup_ddc(encoder); + } + ret = radeon_ddc_get_modes(radeon_connector); + } if (ret > 0) { if (encoder) { @@ -1134,7 +1144,6 @@ static int radeon_dp_get_modes(struct drm_connector *connector) return ret; } - encoder = radeon_best_single_encoder(connector); if (!encoder) return 0; diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 435a3d970ab..e64bec488ed 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -453,6 +453,10 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) int r; radeon_mutex_lock(&rdev->cs_mutex); + if (!rdev->accel_working) { + radeon_mutex_unlock(&rdev->cs_mutex); + return -EBUSY; + } /* initialize parser */ memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 010dad8b66a..c58a036233f 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -597,13 +597,13 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev, if (bo_va == NULL) return 0; - list_del(&bo_va->bo_list); mutex_lock(&vm->mutex); radeon_mutex_lock(&rdev->cs_mutex); radeon_vm_bo_update_pte(rdev, vm, bo, NULL); radeon_mutex_unlock(&rdev->cs_mutex); list_del(&bo_va->vm_list); mutex_unlock(&vm->mutex); + list_del(&bo_va->bo_list); kfree(bo_va); return 0; diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 30a4c5014c8..92c9ea4751f 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -500,8 +500,11 @@ static char radeon_debugfs_ib_names[RADEON_IB_POOL_SIZE][32]; int radeon_debugfs_ring_init(struct radeon_device *rdev) { #if defined(CONFIG_DEBUG_FS) - return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, - ARRAY_SIZE(radeon_debugfs_ring_info_list)); + if (rdev->family >= CHIP_CAYMAN) + return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, + ARRAY_SIZE(radeon_debugfs_ring_info_list)); + else + return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1); #else return 0; #endif diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index b0ce84a20a6..866a05be75f 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -442,6 +442,8 @@ static int rs400_startup(struct radeon_device *rdev) int rs400_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs400_gart_disable(rdev); /* Resume clock before doing reset */ @@ -462,7 +464,11 @@ int rs400_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs400_startup(rdev); + r = rs400_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs400_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index c05865e5521..4fc700684dc 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -876,6 +876,8 @@ static int rs600_startup(struct radeon_device *rdev) int rs600_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs600_gart_disable(rdev); /* Resume clock before doing reset */ @@ -894,7 +896,11 @@ int rs600_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs600_startup(rdev); + r = rs600_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs600_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 4f24a0fa8c8..f68dff2fadc 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -659,6 +659,8 @@ static int rs690_startup(struct radeon_device *rdev) int rs690_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs400_gart_disable(rdev); /* Resume clock before doing reset */ @@ -677,7 +679,11 @@ int rs690_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs690_startup(rdev); + r = rs690_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs690_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 880637fd194..959bf4483be 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -424,6 +424,8 @@ static int rv515_startup(struct radeon_device *rdev) int rv515_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -443,7 +445,11 @@ int rv515_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rv515_startup(rdev); + r = rv515_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rv515_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index a1668b659dd..c049c0c5184 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1139,6 +1139,7 @@ int rv770_resume(struct radeon_device *rdev) r = rv770_startup(rdev); if (r) { DRM_ERROR("r600 startup failed on resume\n"); + rdev->accel_working = false; return r; } diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c index eedca3cf996..dd87ae96c26 100644 --- a/drivers/hwmon/ads1015.c +++ b/drivers/hwmon/ads1015.c @@ -271,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client, continue; err = device_create_file(&client->dev, &ads1015_in[k].dev_attr); if (err) - goto exit_free; + goto exit_remove; } data->hwmon_dev = hwmon_device_register(&client->dev); @@ -285,7 +285,6 @@ static int ads1015_probe(struct i2c_client *client, exit_remove: for (k = 0; k < ADS1015_CHANNELS; ++k) device_remove_file(&client->dev, &ads1015_in[k].dev_attr); -exit_free: kfree(data); exit: return err; diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index f609b5727ba..6aa5a9fad87 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -178,6 +178,16 @@ static inline void f75375_write16(struct i2c_client *client, u8 reg, i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF)); } +static void f75375_write_pwm(struct i2c_client *client, int nr) +{ + struct f75375_data *data = i2c_get_clientdata(client); + if (data->kind == f75387) + f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]); + else + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), + data->pwm[nr]); +} + static struct f75375_data *f75375_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -254,6 +264,36 @@ static inline u16 rpm_to_reg(int rpm) return 1500000 / rpm; } +static bool duty_mode_enabled(u8 pwm_enable) +{ + switch (pwm_enable) { + case 0: /* Manual, duty mode (full speed) */ + case 1: /* Manual, duty mode */ + case 4: /* Auto, duty mode */ + return true; + case 2: /* Auto, speed mode */ + case 3: /* Manual, speed mode */ + return false; + default: + BUG(); + } +} + +static bool auto_mode_enabled(u8 pwm_enable) +{ + switch (pwm_enable) { + case 0: /* Manual, duty mode (full speed) */ + case 1: /* Manual, duty mode */ + case 3: /* Manual, speed mode */ + return false; + case 2: /* Auto, speed mode */ + case 4: /* Auto, duty mode */ + return true; + default: + BUG(); + } +} + static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -287,6 +327,11 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr, if (err < 0) return err; + if (auto_mode_enabled(data->pwm_enable[nr])) + return -EINVAL; + if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr])) + return -EINVAL; + mutex_lock(&data->update_lock); data->fan_target[nr] = rpm_to_reg(val); f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]); @@ -307,9 +352,13 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, if (err < 0) return err; + if (auto_mode_enabled(data->pwm_enable[nr]) || + !duty_mode_enabled(data->pwm_enable[nr])) + return -EINVAL; + mutex_lock(&data->update_lock); data->pwm[nr] = SENSORS_LIMIT(val, 0, 255); - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]); + f75375_write_pwm(client, nr); mutex_unlock(&data->update_lock); return count; } @@ -327,11 +376,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) struct f75375_data *data = i2c_get_clientdata(client); u8 fanmode; - if (val < 0 || val > 3) + if (val < 0 || val > 4) return -EINVAL; fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); if (data->kind == f75387) { + /* For now, deny dangerous toggling of duty mode */ + if (duty_mode_enabled(data->pwm_enable[nr]) != + duty_mode_enabled(val)) + return -EOPNOTSUPP; /* clear each fanX_mode bit before setting them properly */ fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr)); fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr)); @@ -340,19 +393,19 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); break; - case 2: /* AUTOMATIC*/ - fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); + case 2: /* Automatic, speed mode */ break; case 3: /* fan speed */ fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); break; + case 4: /* Automatic, pwm */ + fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); + break; } } else { /* clear each fanX_mode bit before setting them properly */ @@ -361,8 +414,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) case 0: /* full speed */ fanmode |= (3 << FAN_CTRL_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (3 << FAN_CTRL_MODE(nr)); @@ -372,11 +423,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) break; case 3: /* fan speed */ break; + case 4: /* Automatic pwm */ + return -EINVAL; } } f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); data->pwm_enable[nr] = val; + if (val == 0) + f75375_write_pwm(client, nr); return 0; } @@ -727,14 +782,17 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1); duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1); - if (manu && duty) - /* speed */ + if (!manu && duty) + /* auto, pwm */ + data->pwm_enable[nr] = 4; + else if (manu && !duty) + /* manual, speed */ data->pwm_enable[nr] = 3; - else if (!manu && duty) - /* automatic */ + else if (!manu && !duty) + /* automatic, speed */ data->pwm_enable[nr] = 2; else - /* manual */ + /* manual, pwm */ data->pwm_enable[nr] = 1; } else { if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr)))) @@ -759,9 +817,11 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]); set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]); for (nr = 0; nr < 2; nr++) { + if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) || + !duty_mode_enabled(f75375s_pdata->pwm_enable[nr])) + continue; data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255); - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); + f75375_write_pwm(client, nr); } } @@ -788,7 +848,7 @@ static int f75375_probe(struct i2c_client *client, if (err) goto exit_free; - if (data->kind == f75375) { + if (data->kind != f75373) { err = sysfs_chmod_file(&client->dev.kobj, &sensor_dev_attr_pwm1_mode.dev_attr.attr, S_IRUGO | S_IWUSR); diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index e10a092c603..a6760bacd91 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -72,8 +72,8 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END }; static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; -#define FAN_FROM_REG(val, div, rpm_range) ((val) == 0 ? -1 : \ - (val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val))) +#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \ + 0 : (rpm_ranges[rpm_range] * 30) / (val)) #define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255) /* @@ -333,7 +333,7 @@ static ssize_t show_fan_input(struct device *dev, return PTR_ERR(data); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], - data->ppr, data->rpm_range)); + data->rpm_range)); } static ssize_t show_alarm(struct device *dev, @@ -429,9 +429,9 @@ static int max6639_init_client(struct i2c_client *client) struct max6639_data *data = i2c_get_clientdata(client); struct max6639_platform_data *max6639_info = client->dev.platform_data; - int i = 0; + int i; int rpm_range = 1; /* default: 4000 RPM */ - int err = 0; + int err; /* Reset chip to default values, see below for GCONFIG setup */ err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG, @@ -446,11 +446,6 @@ static int max6639_init_client(struct i2c_client *client) else data->ppr = 2; data->ppr -= 1; - err = i2c_smbus_write_byte_data(client, - MAX6639_REG_FAN_PPR(i), - data->ppr << 5); - if (err) - goto exit; if (max6639_info) rpm_range = rpm_range_to_reg(max6639_info->rpm_range); @@ -458,6 +453,13 @@ static int max6639_init_client(struct i2c_client *client) for (i = 0; i < 2; i++) { + /* Set Fan pulse per revolution */ + err = i2c_smbus_write_byte_data(client, + MAX6639_REG_FAN_PPR(i), + data->ppr << 6); + if (err) + goto exit; + /* Fans config PWM, RPM */ err = i2c_smbus_write_byte_data(client, MAX6639_REG_FAN_CONFIG1(i), diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c index beaf5a8d9c4..9b97a5b3cf3 100644 --- a/drivers/hwmon/pmbus/max34440.c +++ b/drivers/hwmon/pmbus/max34440.c @@ -82,7 +82,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page, case PMBUS_VIRT_RESET_TEMP_HISTORY: ret = pmbus_write_word_data(client, page, MAX34440_MFR_TEMPERATURE_PEAK, - 0xffff); + 0x8000); break; default: ret = -ENODATA; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 7e78f7c8785..3d471d56bf1 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -72,6 +72,7 @@ #define MXS_I2C_QUEUESTAT (0x70) #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 +#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F #define MXS_I2C_QUEUECMD (0x80) @@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int ret; int flags; - init_completion(&i2c->cmd_complete); - dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); if (msg->len == 0) return -EINVAL; + init_completion(&i2c->cmd_complete); + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; if (msg->flags & I2C_M_RD) @@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; + bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) else i2c->cmd_err = 0; - complete(&i2c->cmd_complete); + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); + return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index d6036465099..f6733267fa9 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -29,6 +29,8 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/i2c-pxa.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/err.h> @@ -1044,23 +1046,60 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = { .functionality = i2c_pxa_functionality, }; -static int i2c_pxa_probe(struct platform_device *dev) +static struct of_device_id i2c_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, + { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, + { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, + {} +}; +MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); + +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) { - struct pxa_i2c *i2c; - struct resource *res; - struct i2c_pxa_platform_data *plat = dev->dev.platform_data; - const struct platform_device_id *id = platform_get_device_id(dev); - enum pxa_i2c_types i2c_type = id->driver_data; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(i2c_pxa_dt_ids, &pdev->dev); int ret; - int irq; - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - irq = platform_get_irq(dev, 0); - if (res == NULL || irq < 0) - return -ENODEV; + if (!of_id) + return 1; + ret = of_alias_get_id(np, "i2c"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + pdev->id = ret; + if (of_get_property(np, "mrvl,i2c-polling", NULL)) + i2c->use_pio = 1; + if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) + i2c->fast_mode = 1; + *i2c_types = (u32)(of_id->data); + return 0; +} - if (!request_mem_region(res->start, resource_size(res), res->name)) - return -ENOMEM; +static int i2c_pxa_probe_pdata(struct platform_device *pdev, + struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) +{ + struct i2c_pxa_platform_data *plat = pdev->dev.platform_data; + const struct platform_device_id *id = platform_get_device_id(pdev); + + *i2c_types = id->driver_data; + if (plat) { + i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; + } + return 0; +} + +static int i2c_pxa_probe(struct platform_device *dev) +{ + struct i2c_pxa_platform_data *plat = dev->dev.platform_data; + enum pxa_i2c_types i2c_type; + struct pxa_i2c *i2c; + struct resource *res = NULL; + int ret, irq; i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { @@ -1068,6 +1107,24 @@ static int i2c_pxa_probe(struct platform_device *dev) goto emalloc; } + ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); + if (ret > 0) + ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); + if (ret < 0) + goto eclk; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + irq = platform_get_irq(dev, 0); + if (res == NULL || irq < 0) { + ret = -ENODEV; + goto eclk; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + ret = -ENOMEM; + goto eclk; + } + i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; @@ -1109,21 +1166,16 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->slave_addr = I2C_PXA_SLAVE_ADDR; -#ifdef CONFIG_I2C_PXA_SLAVE if (plat) { +#ifdef CONFIG_I2C_PXA_SLAVE i2c->slave_addr = plat->slave_addr; i2c->slave = plat->slave; - } #endif - - clk_enable(i2c->clk); - - if (plat) { i2c->adap.class = plat->class; - i2c->use_pio = plat->use_pio; - i2c->fast_mode = plat->fast_mode; } + clk_enable(i2c->clk); + if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { @@ -1234,6 +1286,7 @@ static struct platform_driver i2c_pxa_driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, .pm = I2C_PXA_DEV_PM_OPS, + .of_match_table = i2c_pxa_dt_ids, }, .id_table = i2c_pxa_id_table, }; diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c index 288da5c1499..103dbd92e25 100644 --- a/drivers/iommu/omap-iommu-debug.c +++ b/drivers/iommu/omap-iommu-debug.c @@ -44,7 +44,8 @@ static ssize_t debug_read_ver(struct file *file, char __user *userbuf, static ssize_t debug_read_regs(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; + struct omap_iommu *obj = dev_to_omap_iommu(dev); char *p, *buf; ssize_t bytes; @@ -67,7 +68,8 @@ static ssize_t debug_read_regs(struct file *file, char __user *userbuf, static ssize_t debug_read_tlb(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; + struct omap_iommu *obj = dev_to_omap_iommu(dev); char *p, *buf; ssize_t bytes, rest; @@ -97,7 +99,8 @@ static ssize_t debug_write_pagetable(struct file *file, struct iotlb_entry e; struct cr_regs cr; int err; - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; + struct omap_iommu *obj = dev_to_omap_iommu(dev); char buf[MAXCOLUMN], *p = buf; count = min(count, sizeof(buf)); @@ -184,7 +187,8 @@ out: static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; + struct omap_iommu *obj = dev_to_omap_iommu(dev); char *p, *buf; size_t bytes; @@ -212,7 +216,8 @@ static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf, static ssize_t debug_read_mmap(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; + struct omap_iommu *obj = dev_to_omap_iommu(dev); char *p, *buf; struct iovm_struct *tmp; int uninitialized_var(i); @@ -254,7 +259,7 @@ static ssize_t debug_read_mmap(struct file *file, char __user *userbuf, static ssize_t debug_read_mem(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; char *p, *buf; struct iovm_struct *area; ssize_t bytes; @@ -268,8 +273,8 @@ static ssize_t debug_read_mem(struct file *file, char __user *userbuf, mutex_lock(&iommu_debug_lock); - area = omap_find_iovm_area(obj, (u32)ppos); - if (IS_ERR(area)) { + area = omap_find_iovm_area(dev, (u32)ppos); + if (!area) { bytes = -EINVAL; goto err_out; } @@ -287,7 +292,7 @@ err_out: static ssize_t debug_write_mem(struct file *file, const char __user *userbuf, size_t count, loff_t *ppos) { - struct omap_iommu *obj = file->private_data; + struct device *dev = file->private_data; struct iovm_struct *area; char *p, *buf; @@ -305,8 +310,8 @@ static ssize_t debug_write_mem(struct file *file, const char __user *userbuf, goto err_out; } - area = omap_find_iovm_area(obj, (u32)ppos); - if (IS_ERR(area)) { + area = omap_find_iovm_area(dev, (u32)ppos); + if (!area) { count = -EINVAL; goto err_out; } @@ -350,7 +355,7 @@ DEBUG_FOPS(mem); { \ struct dentry *dent; \ dent = debugfs_create_file(#attr, mode, parent, \ - obj, &debug_##attr##_fops); \ + dev, &debug_##attr##_fops); \ if (!dent) \ return -ENOMEM; \ } @@ -362,20 +367,29 @@ static int iommu_debug_register(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_iommu *obj = platform_get_drvdata(pdev); + struct omap_iommu_arch_data *arch_data; struct dentry *d, *parent; if (!obj || !obj->dev) return -EINVAL; + arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL); + if (!arch_data) + return -ENOMEM; + + arch_data->iommu_dev = obj; + + dev->archdata.iommu = arch_data; + d = debugfs_create_dir(obj->name, iommu_debug_root); if (!d) - return -ENOMEM; + goto nomem; parent = d; d = debugfs_create_u8("nr_tlb_entries", 400, parent, (u8 *)&obj->nr_tlb_entries); if (!d) - return -ENOMEM; + goto nomem; DEBUG_ADD_FILE_RO(ver); DEBUG_ADD_FILE_RO(regs); @@ -385,6 +399,22 @@ static int iommu_debug_register(struct device *dev, void *data) DEBUG_ADD_FILE(mem); return 0; + +nomem: + kfree(arch_data); + return -ENOMEM; +} + +static int iommu_debug_unregister(struct device *dev, void *data) +{ + if (!dev->archdata.iommu) + return 0; + + kfree(dev->archdata.iommu); + + dev->archdata.iommu = NULL; + + return 0; } static int __init iommu_debug_init(void) @@ -411,6 +441,7 @@ module_init(iommu_debug_init) static void __exit iommu_debugfs_exit(void) { debugfs_remove_recursive(iommu_debug_root); + omap_foreach_iommu_device(NULL, iommu_debug_unregister); } module_exit(iommu_debugfs_exit) diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c index d8edd979d01..6899dcd02df 100644 --- a/drivers/iommu/omap-iommu.c +++ b/drivers/iommu/omap-iommu.c @@ -1223,7 +1223,8 @@ static int __init omap_iommu_init(void) return platform_driver_register(&omap_iommu_driver); } -module_init(omap_iommu_init); +/* must be ready before omap3isp is probed */ +subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index 86b28579f0c..ea1e6545df3 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,8 +4,8 @@ menu "Texas Instruments WL128x FM driver (ST based)" config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL - select TI_ST if NET && GPIOLIB + depends on VIDEO_V4L2 && RFKILL && GPIOLIB + select TI_ST if NET help Choose Y here if you have this FM radio chip. diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 3aeb29a7ce1..7f26fdf2e54 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -47,7 +47,7 @@ #define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>" #define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" #define MOD_NAME "imon" -#define MOD_VERSION "0.9.3" +#define MOD_VERSION "0.9.4" #define DISPLAY_MINOR_BASE 144 #define DEVICE_NAME "lcd%d" @@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf0) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf0) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); } @@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf1) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf1) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); } @@ -2242,7 +2260,7 @@ find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(rx_urb); rx_urb_alloc_failed: - dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret); return NULL; } diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index e5eb56a5b61..6510110f53d 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -154,10 +154,20 @@ static int device_authorization(struct hdpvr_device *dev) } #endif + dev->fw_ver = dev->usbc_buf[1]; + v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n", - dev->usbc_buf[1], &dev->usbc_buf[2]); + dev->fw_ver, &dev->usbc_buf[2]); + + if (dev->fw_ver > 0x15) { + dev->options.brightness = 0x80; + dev->options.contrast = 0x40; + dev->options.hue = 0xf; + dev->options.saturation = 0x40; + dev->options.sharpness = 0x80; + } - switch (dev->usbc_buf[1]) { + switch (dev->fw_ver) { case HDPVR_FIRMWARE_VERSION: dev->flags &= ~HDPVR_FLAG_AC3_CAP; break; @@ -169,7 +179,7 @@ static int device_authorization(struct hdpvr_device *dev) default: v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might" " not work.\n"); - if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3) + if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3) dev->flags |= HDPVR_FLAG_AC3_CAP; else dev->flags &= ~HDPVR_FLAG_AC3_CAP; @@ -270,6 +280,8 @@ static const struct hdpvr_options hdpvr_default_options = { .bitrate_mode = HDPVR_CONSTANT, .gop_mode = HDPVR_SIMPLE_IDR_GOP, .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC, + /* original picture controls for firmware version <= 0x15 */ + /* updated in device_authorization() for newer firmware */ .brightness = 0x86, .contrast = 0x80, .hue = 0x80, diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index 087f7c08cb8..11ffe9cc178 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -283,12 +283,13 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev) hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00); + dev->status = STATUS_STREAMING; + INIT_WORK(&dev->worker, hdpvr_transmit_buffers); queue_work(dev->workqueue, &dev->worker); v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev, "streaming started\n"); - dev->status = STATUS_STREAMING; return 0; } @@ -722,21 +723,39 @@ static const s32 supported_v4l2_ctrls[] = { }; static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc, - int ac3) + int ac3, int fw_ver) { int err; + if (fw_ver > 0x15) { + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + } + } else { + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + } + } + switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86); - case V4L2_CID_CONTRAST: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_SHARPNESS: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill( qc, V4L2_MPEG_AUDIO_ENCODING_AAC, @@ -794,7 +813,8 @@ static int vidioc_queryctrl(struct file *file, void *private_data, if (qc->id == supported_v4l2_ctrls[i]) return fill_queryctrl(&dev->options, qc, - dev->flags & HDPVR_FLAG_AC3_CAP); + dev->flags & HDPVR_FLAG_AC3_CAP, + dev->fw_ver); if (qc->id < supported_v4l2_ctrls[i]) break; diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index d6439db1d18..fea3c692699 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -113,6 +113,7 @@ struct hdpvr_device { /* usb control transfer buffer and lock */ struct mutex usbc_mutex; u8 *usbc_buf; + u8 fw_ver; }; static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev) diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index a74a79701d3..eaabc27f0fa 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -1407,7 +1407,7 @@ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event) static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc) { struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); - struct video_device *vdev = &ccdc->subdev.devnode; + struct video_device *vdev = ccdc->subdev.devnode; struct v4l2_event event; memset(&event, 0, sizeof(event)); diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c index 4bcfc375973..c8d8e38d0d8 100644 --- a/drivers/misc/atmel_tclib.c +++ b/drivers/misc/atmel_tclib.c @@ -6,12 +6,10 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/export.h> - -/* Number of bytes to reserve for the iomem resource */ -#define ATMEL_TC_IOMEM_SIZE 256 - +#include <linux/of.h> /* * This is a thin library to solve the problem of how to portably allocate @@ -48,10 +46,17 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name) struct atmel_tc *tc; struct platform_device *pdev = NULL; struct resource *r; + size_t size; spin_lock(&tc_list_lock); list_for_each_entry(tc, &tc_list, node) { - if (tc->pdev->id == block) { + if (tc->pdev->dev.of_node) { + if (of_alias_get_id(tc->pdev->dev.of_node, "tcb") + == block) { + pdev = tc->pdev; + break; + } + } else if (tc->pdev->id == block) { pdev = tc->pdev; break; } @@ -61,11 +66,15 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name) goto fail; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name); if (!r) goto fail; - tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE); + size = resource_size(r); + r = request_mem_region(r->start, size, name); + if (!r) + goto fail; + + tc->regs = ioremap(r->start, size); if (!tc->regs) goto fail_ioremap; @@ -76,7 +85,7 @@ out: return tc; fail_ioremap: - release_mem_region(r->start, ATMEL_TC_IOMEM_SIZE); + release_mem_region(r->start, size); fail: tc = NULL; goto out; @@ -96,7 +105,7 @@ void atmel_tc_free(struct atmel_tc *tc) spin_lock(&tc_list_lock); if (tc->regs) { iounmap(tc->regs); - release_mem_region(tc->iomem->start, ATMEL_TC_IOMEM_SIZE); + release_mem_region(tc->iomem->start, resource_size(tc->iomem)); tc->regs = NULL; tc->iomem = NULL; } @@ -104,6 +113,30 @@ void atmel_tc_free(struct atmel_tc *tc) } EXPORT_SYMBOL_GPL(atmel_tc_free); +#if defined(CONFIG_OF) +static struct atmel_tcb_config tcb_rm9200_config = { + .counter_width = 16, +}; + +static struct atmel_tcb_config tcb_sam9x5_config = { + .counter_width = 32, +}; + +static const struct of_device_id atmel_tcb_dt_ids[] = { + { + .compatible = "atmel,at91rm9200-tcb", + .data = &tcb_rm9200_config, + }, { + .compatible = "atmel,at91sam9x5-tcb", + .data = &tcb_sam9x5_config, + }, { + /* sentinel */ + } +}; + +MODULE_DEVICE_TABLE(of, atmel_tcb_dt_ids); +#endif + static int __init tc_probe(struct platform_device *pdev) { struct atmel_tc *tc; @@ -129,6 +162,14 @@ static int __init tc_probe(struct platform_device *pdev) return -EINVAL; } + /* Now take SoC information if available */ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(atmel_tcb_dt_ids, pdev->dev.of_node); + if (match) + tc->tcb_config = match->data; + } + tc->clk[0] = clk; tc->clk[1] = clk_get(&pdev->dev, "t1_clk"); if (IS_ERR(tc->clk[1])) @@ -153,7 +194,10 @@ static int __init tc_probe(struct platform_device *pdev) } static struct platform_driver tc_driver = { - .driver.name = "atmel_tcb", + .driver = { + .name = "atmel_tcb", + .of_match_table = of_match_ptr(atmel_tcb_dt_ids), + }, }; static int __init tc_init(void) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 947faa5d2ce..efdb81d21c4 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -86,7 +86,6 @@ static inline int at91mci_is_mci1rev2xx(void) { return ( cpu_is_at91sam9260() || cpu_is_at91sam9263() - || cpu_is_at91cap9() || cpu_is_at91sam9rl() || cpu_is_at91sam9g10() || cpu_is_at91sam9g20() diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d955ffaf44..304f2f98b68 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1325,7 +1325,7 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret) goto unmap; - if (dev->irq[1] == NO_IRQ) + if (dev->irq[1] == NO_IRQ || !dev->irq[1]) host->singleirq = true; else { ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 04a3f1b756a..192b0d118df 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) spin_unlock_irqrestore(&priv->cmdreg_lock, flags); } +static int sja1000_is_absent(struct sja1000_priv *priv) +{ + return (priv->read_reg(priv, REG_MOD) == 0xFF); +} + static int sja1000_probe_chip(struct net_device *dev) { struct sja1000_priv *priv = netdev_priv(dev); - if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) { + if (priv->reg_base && sja1000_is_absent(priv)) { printk(KERN_INFO "%s: probing @0x%lX failed\n", DRV_NAME, dev->base_addr); return 0; @@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) { n++; status = priv->read_reg(priv, REG_SR); + /* check for absent controller due to hw unplug */ + if (status == 0xFF && sja1000_is_absent(priv)) + return IRQ_NONE; if (isrc & IRQ_WUI) dev_warn(dev->dev.parent, "wakeup interrupt\n"); @@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while (status & SR_RBS) { sja1000_rx(dev); status = priv->read_reg(priv, REG_SR); + /* check for absent controller */ + if (status == 0xFF && sja1000_is_absent(priv)) + return IRQ_NONE; } } if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index b8591246eb4..1ff3c6df35a 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb, dev_info(&adapter->pdev->dev, "tx locked\n"); return NETDEV_TX_LOCKED; } - if (skb->mark == 0x01) - type = atl1c_trans_high; - else - type = atl1c_trans_normal; if (atl1c_tpd_avail(adapter, type) < tpd_req) { /* no enough descriptor, just stop queue */ diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 3fb66d09ece..cab87456a34 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void) return err; } -static inline void __exit b44_pci_exit(void) +static inline void b44_pci_exit(void) { #ifdef CONFIG_B44_PCI ssb_pcihost_unregister(&b44_pci_driver); diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index dd3a0a232ea..818a573669e 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr, fl6.flowi6_oif = dst_addr->sin6_scope_id; *dst = ip6_route_output(&init_net, NULL, &fl6); - if (*dst) + if ((*dst)->error) { + dst_release(*dst); + *dst = NULL; + return -ENETUNREACH; + } else return 0; #endif diff --git a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h index c2c0680a114..ac37cacc613 100644 --- a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h +++ b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h @@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc, CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0; *fcoe_enc_error = (desc->flags & CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0; - *fcoe_eof = (u8)((desc->checksum_fcoe >> + *fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >> CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) & CQ_ENET_RQ_DESC_FCOE_EOF_MASK); *checksum = 0; diff --git a/drivers/net/ethernet/cisco/enic/enic_pp.c b/drivers/net/ethernet/cisco/enic/enic_pp.c index 22bf03a1829..c347b6236f8 100644 --- a/drivers/net/ethernet/cisco/enic/enic_pp.c +++ b/drivers/net/ethernet/cisco/enic/enic_pp.c @@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf) struct enic_port_profile *pp; struct vic_provinfo *vp; const u8 oui[3] = VIC_PROVINFO_CISCO_OUI; - const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX); + const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX); char uuid_str[38]; char client_mac_str[18]; u8 *client_mac; diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 27d651a80f3..55cbf65512c 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu) ((new_mtu) < IPV6_MIN_MTU)) return -EINVAL; - if (new_mtu > 4000) { - jme->reg_rxcs &= ~RXCS_FIFOTHNP; - jme->reg_rxcs |= RXCS_FIFOTHNP_64QW; - jme_restart_rx_engine(jme); - } else { - jme->reg_rxcs &= ~RXCS_FIFOTHNP; - jme->reg_rxcs |= RXCS_FIFOTHNP_128QW; - jme_restart_rx_engine(jme); - } netdev->mtu = new_mtu; netdev_update_features(netdev); + jme_restart_rx_engine(jme); jme_reset_link(jme); return 0; diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 4304072bd3c..3efc897c991 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -730,7 +730,7 @@ enum jme_rxcs_values { RXCS_RETRYCNT_60 = 0x00000F00, RXCS_DEFAULT = RXCS_FIFOTHTP_128T | - RXCS_FIFOTHNP_128QW | + RXCS_FIFOTHNP_16QW | RXCS_DMAREQSZ_128B | RXCS_RETRYGAP_256ns | RXCS_RETRYCNT_32, diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 8fa41f3082c..9129ace0256 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector) struct mlx4_priv *priv = mlx4_priv(dev); int vec = 0, err = 0, i; - spin_lock(&priv->msix_ctl.pool_lock); + mutex_lock(&priv->msix_ctl.pool_lock); for (i = 0; !vec && i < dev->caps.comp_pool; i++) { if (~priv->msix_ctl.pool_bm & 1ULL << i) { priv->msix_ctl.pool_bm |= 1ULL << i; @@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector) eq_set_ci(&priv->eq_table.eq[vec], 1); } } - spin_unlock(&priv->msix_ctl.pool_lock); + mutex_unlock(&priv->msix_ctl.pool_lock); if (vec) { *vector = vec; @@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec) if (likely(i >= 0)) { /*sanity check , making sure were not trying to free irq's Belonging to a legacy EQ*/ - spin_lock(&priv->msix_ctl.pool_lock); + mutex_lock(&priv->msix_ctl.pool_lock); if (priv->msix_ctl.pool_bm & 1ULL << i) { free_irq(priv->eq_table.eq[vec].irq, &priv->eq_table.eq[vec]); priv->msix_ctl.pool_bm &= ~(1ULL << i); } - spin_unlock(&priv->msix_ctl.pool_lock); + mutex_unlock(&priv->msix_ctl.pool_lock); } } diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 8a21e10952e..9ea7cabcaf3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -685,7 +685,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, return err; } -static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port) +int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port) { struct mlx4_cmd_mailbox *outbox = ptr; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 678558b502f..d498f049c74 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev, for (port = 0; port < dev->caps.num_ports; port++) { /* Change the port type only if the new type is different * from the current, and not set to Auto */ - if (port_types[port] != dev->caps.port_type[port + 1]) { + if (port_types[port] != dev->caps.port_type[port + 1]) change = 1; - dev->caps.port_type[port + 1] = port_types[port]; - } } if (change) { mlx4_unregister_device(dev); for (port = 1; port <= dev->caps.num_ports; port++) { mlx4_CLOSE_PORT(dev, port); + dev->caps.port_type[port] = port_types[port - 1]; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, " @@ -986,6 +985,9 @@ static int map_bf_area(struct mlx4_dev *dev) resource_size_t bf_len; int err = 0; + if (!dev->caps.bf_reg_size) + return -ENXIO; + bf_start = pci_resource_start(dev->pdev, 2) + (dev->caps.num_uars << PAGE_SHIFT); bf_len = pci_resource_len(dev->pdev, 2) - @@ -1825,7 +1827,7 @@ slave_start: goto err_master_mfunc; priv->msix_ctl.pool_bm = 0; - spin_lock_init(&priv->msix_ctl.pool_lock); + mutex_init(&priv->msix_ctl.pool_lock); mlx4_enable_msi_x(dev); if ((mlx4_is_mfunc(dev)) && diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index c92269f8c05..28f8251561f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -697,7 +697,7 @@ struct mlx4_sense { struct mlx4_msix_ctl { u64 pool_bm; - spinlock_t pool_lock; + struct mutex pool_lock; }; struct mlx4_steer { diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 8deeef98280..25a80d71fb2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -304,7 +304,7 @@ static int mlx4_HW2SW_MPT(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED); } -static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, +int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, u32 *base_mridx) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -320,14 +320,14 @@ static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, } EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range); -static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt) +void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt) { struct mlx4_priv *priv = mlx4_priv(dev); mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt); } EXPORT_SYMBOL_GPL(mlx4_mr_release_range); -static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, +int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, u64 iova, u64 size, u32 access, int npages, int page_shift, struct mlx4_mr *mr) { @@ -457,7 +457,7 @@ int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access, } EXPORT_SYMBOL_GPL(mlx4_mr_alloc); -static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr) +void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr) { int err; @@ -852,7 +852,7 @@ err_free: } EXPORT_SYMBOL_GPL(mlx4_fmr_alloc); -static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, +int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, u32 access, int max_pages, int max_maps, u8 page_shift, struct mlx4_fmr *fmr) { @@ -954,7 +954,7 @@ int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr) } EXPORT_SYMBOL_GPL(mlx4_fmr_free); -static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr) +int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr) { if (fmr->maps) return -EBUSY; diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index 231176fcd2b..2784bc706f1 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -1545,7 +1545,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev) netdev->irq = platform_get_irq(pdev, 0); - if (netdev->irq < 0) { + if ((int)netdev->irq < 0) { err = netdev->irq; goto err_get_irq; } diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index aca34986176..fc52fca7419 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struct efx_rx_queue *rx_queue) if (unlikely(!skb)) return -ENOMEM; - /* Adjust the SKB for padding and checksum */ + /* Adjust the SKB for padding */ skb_reserve(skb, NET_IP_ALIGN); rx_buf->len = skb_len - NET_IP_ALIGN; rx_buf->is_page = false; - skb->ip_summed = CHECKSUM_UNNECESSARY; rx_buf->dma_addr = pci_map_single(efx->pci_dev, skb->data, rx_buf->len, @@ -496,6 +495,7 @@ static void efx_rx_packet_gro(struct efx_channel *channel, EFX_BUG_ON_PARANOID(!checksummed); rx_buf->u.skb = NULL; + skb->ip_summed = CHECKSUM_UNNECESSARY; gro_result = napi_gro_receive(napi, skb); } diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 4fa0bcb25df..4b2f54565f6 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1009,7 +1009,7 @@ static void emac_rx_handler(void *token, int len, int status) int ret; /* free and bail if we are shutting down */ - if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) { + if (unlikely(!netif_running(ndev))) { dev_kfree_skb_any(skb); return; } @@ -1038,7 +1038,9 @@ static void emac_rx_handler(void *token, int len, int status) recycle: ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, skb_tailroom(skb), GFP_KERNEL); - if (WARN_ON(ret < 0)) + + WARN_ON(ret == -ENOMEM); + if (unlikely(ret < 0)) dev_kfree_skb_any(skb); } diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c81f136ae67..0856e1b7a84 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -30,16 +30,16 @@ #include <asm/irq.h> #include <asm/uaccess.h> -MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers"); +MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); MODULE_AUTHOR("Michael Barkowski"); MODULE_LICENSE("GPL"); -/* IP101A/IP1001 */ -#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ -#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ -#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ -#define IP101A_APS_ON 2 /* IP101A APS Mode bit */ +/* IP101A/G - IP1001 */ +#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ +#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ +#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ +#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ static int ip175c_config_init(struct phy_device *phydev) { @@ -98,20 +98,24 @@ static int ip175c_config_init(struct phy_device *phydev) static int ip1xx_reset(struct phy_device *phydev) { - int err, bmcr; + int bmcr; /* Software Reset PHY */ bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; bmcr |= BMCR_RESET; - err = phy_write(phydev, MII_BMCR, bmcr); - if (err < 0) - return err; + bmcr = phy_write(phydev, MII_BMCR, bmcr); + if (bmcr < 0) + return bmcr; do { bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; } while (bmcr & BMCR_RESET); - return err; + return 0; } static int ip1001_config_init(struct phy_device *phydev) @@ -124,7 +128,10 @@ static int ip1001_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); + if (c < 0) + return c; c |= IP1001_APS_ON; + c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); if (c < 0) return c; @@ -132,14 +139,19 @@ static int ip1001_config_init(struct phy_device *phydev) /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (c < 0) + return c; + c |= IP1001_PHASE_SEL_MASK; c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + if (c < 0) + return c; } - return c; + return 0; } -static int ip101a_config_init(struct phy_device *phydev) +static int ip101a_g_config_init(struct phy_device *phydev) { int c; @@ -149,7 +161,7 @@ static int ip101a_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); - c |= IP101A_APS_ON; + c |= IP101A_G_APS_ON; return c; } @@ -191,6 +203,7 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -199,13 +212,14 @@ static struct phy_driver ip1001_driver = { .driver = { .owner = THIS_MODULE,}, }; -static struct phy_driver ip101a_driver = { +static struct phy_driver ip101a_g_driver = { .phy_id = 0x02430c54, - .name = "ICPlus IP101A", + .name = "ICPlus IP101A/G", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .config_init = &ip101a_config_init, + .flags = PHY_HAS_INTERRUPT, + .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .suspend = genphy_suspend, @@ -221,7 +235,7 @@ static int __init icplus_init(void) if (ret < 0) return -ENODEV; - ret = phy_driver_register(&ip101a_driver); + ret = phy_driver_register(&ip101a_g_driver); if (ret < 0) return -ENODEV; @@ -231,7 +245,7 @@ static int __init icplus_init(void) static void __exit icplus_exit(void) { phy_driver_unregister(&ip1001_driver); - phy_driver_unregister(&ip101a_driver); + phy_driver_unregister(&ip101a_g_driver); phy_driver_unregister(&ip175c_driver); } @@ -241,6 +255,7 @@ module_exit(icplus_exit); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { 0x02430d80, 0x0ffffff0 }, { 0x02430d90, 0x0ffffff0 }, + { 0x02430c54, 0x0ffffff0 }, { } }; diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index edfa15d2e79..486b4048850 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp) continue; } if (PPP_MP_CB(p)->sequence != seq) { + u32 oldseq; /* Fragment `seq' is missing. If it is after minseq, it might arrive later, so stop here. */ if (seq_after(seq, minseq)) break; /* Fragment `seq' is lost, keep going. */ lost = 1; + oldseq = seq; seq = seq_before(minseq, PPP_MP_CB(p)->sequence)? minseq + 1: PPP_MP_CB(p)->sequence; + + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "lost frag %u..%u\n", + oldseq, seq-1); + goto again; } @@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp) struct sk_buff *tmp2; skb_queue_reverse_walk_from_safe(list, p, tmp2) { + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "discarding frag %u\n", + PPP_MP_CB(p)->sequence); __skb_unlink(p, list); kfree_skb(p); } @@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp) /* If we have discarded any fragments, signal a receive error. */ if (PPP_MP_CB(head)->sequence != ppp->nextseq) { + skb_queue_walk_safe(list, p, tmp) { + if (p == head) + break; + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "discarding frag %u\n", + PPP_MP_CB(p)->sequence); + __skb_unlink(p, list); + kfree_skb(p); + } + if (ppp->debug & 1) netdev_printk(KERN_DEBUG, ppp->dev, " missed pkts %u..%u\n", diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 41a61efc331..90a30026a93 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -573,6 +573,13 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* * WHITELIST!!! * diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 304fe78ff60..e1324b4a0f6 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1632,7 +1632,7 @@ static int hso_get_count(struct tty_struct *tty, struct hso_serial *serial = get_serial_by_tty(tty); struct hso_tiocmget *tiocmget = serial->tiocmget; - memset(&icount, 0, sizeof(struct serial_icounter_struct)); + memset(icount, 0, sizeof(struct serial_icounter_struct)); if (!tiocmget) return -ENOENT; diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index f701d412708..c3197ce0e2a 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -316,6 +316,11 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { + /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */ + USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, +}, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, @@ -349,6 +354,13 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = OLYMPUS_MXL_INFO, }, + +/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, +}, { }, // END }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index de7fc345148..3dcd3857a36 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -843,8 +843,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, /* for simplicity, don't copy L4 headers */ ctx->l4_hdr_size = 0; } - ctx->copy_size = ctx->eth_ip_hdr_size + - ctx->l4_hdr_size; + ctx->copy_size = min(ctx->eth_ip_hdr_size + + ctx->l4_hdr_size, skb->len); } else { ctx->eth_ip_hdr_size = 0; ctx->l4_hdr_size = 0; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 635b592ad96..a427a16bb73 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1346,7 +1346,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, fc = hdr->frame_control; for (i = 0; i < sc->hw->max_rates; i++) { struct ieee80211_tx_rate *rate = &tx_info->status.rates[i]; - if (!rate->count) + if (rate->idx < 0 || !rate->count) break; final_ts_idx = i; diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index c3b6c4652cd..5b2972b43b0 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -841,7 +841,12 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, ret = mwifiex_set_rf_channel(priv, channel, priv->adapter->channel_type); - ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */ + /* As this is new association, clear locally stored + * keys and security related flags */ + priv->sec_info.wpa_enabled = false; + priv->sec_info.wpa2_enabled = false; + priv->wep_key_curr_index = 0; + ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); if (mode == NL80211_IFTYPE_ADHOC) { /* "privacy" is set only for ad-hoc mode */ @@ -886,6 +891,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, dev_dbg(priv->adapter->dev, "info: setting wep encryption" " with key len %d\n", sme->key_len); + priv->wep_key_curr_index = sme->key_idx; ret = mwifiex_set_encode(priv, sme->key, sme->key_len, sme->key_idx, 0); } diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 20fbebd49db..343ad29e211 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -253,7 +253,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (!of_device_is_available(node)) return NULL; - dev = kzalloc(sizeof(*dev), GFP_KERNEL); + dev = amba_device_alloc(NULL, 0, 0); if (!dev) return NULL; @@ -283,14 +283,14 @@ static struct amba_device *of_amba_device_create(struct device_node *node, if (ret) goto err_free; - ret = amba_device_register(dev, &iomem_resource); + ret = amba_device_add(dev, &iomem_resource); if (ret) goto err_free; return dev; err_free: - kfree(dev); + amba_device_put(dev); return NULL; } #else /* CONFIG_ARM_AMBA */ diff --git a/drivers/parisc/iommu-helpers.h b/drivers/parisc/iommu-helpers.h index a9c46cc2db3..8c33491b21f 100644 --- a/drivers/parisc/iommu-helpers.h +++ b/drivers/parisc/iommu-helpers.h @@ -1,3 +1,5 @@ +#include <linux/prefetch.h> + /** * iommu_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir. * @ioc: The I/O Controller. diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 4902206f53d..1dd68f50263 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -26,6 +26,7 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/at91_ramc.h> /* @@ -156,7 +157,7 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) /* * Use 16 bit accesses unless/until we need 8-bit i/o space. */ - csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW; + csr = at91_ramc_read(0, AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW; /* * NOTE: this CF controller ignores IOIS16, so we can't really do @@ -175,7 +176,7 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) csr |= AT91_SMC_DBW_16; pr_debug("%s: 16bit i/o bus\n", driver_name); } - at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr); + at91_ramc_write(0, AT91_SMC_CSR(cf->board->chipselect), csr); io->start = cf->socket.io_offset; io->stop = io->start + SZ_2K - 1; diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index a87e2728b2c..64d433ec4fc 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -328,21 +328,15 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) goto err1; } - if (ret) { - while (--i >= 0) - soc_pcmcia_remove_one(&sinfo->skt[i]); - kfree(sinfo); - clk_put(clk); - } else { - pxa2xx_configure_sockets(&dev->dev); - dev_set_drvdata(&dev->dev, sinfo); - } + pxa2xx_configure_sockets(&dev->dev); + dev_set_drvdata(&dev->dev, sinfo); return 0; err1: while (--i >= 0) soc_pcmcia_remove_one(&sinfo->skt[i]); + clk_put(clk); kfree(sinfo); err0: return ret; diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 42a7d603c87..7481146a5b4 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -33,6 +33,8 @@ #include <linux/mutex.h> #include <asm/bios_ebda.h> +#include <asm-generic/io-64-nonatomic-lo-hi.h> + static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); @@ -83,19 +85,6 @@ static void __iomem *rtl_cmd_addr; static u8 rtl_cmd_type; static u8 rtl_cmd_width; -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len) { if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 809a3ae943c..88a98cff5a4 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -77,6 +77,8 @@ #include <asm/processor.h> #include "intel_ips.h" +#include <asm-generic/io-64-nonatomic-lo-hi.h> + #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32 /* @@ -344,19 +346,6 @@ struct ips_driver { static bool ips_gpu_turbo_enabled(struct ips_driver *ips); -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - /** * ips_cpu_busy - is CPU busy? * @ips: IPS driver struct diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index df33530cec4..28b81ae4cf7 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -196,7 +196,7 @@ static const unsigned int LDO12_suspend_table[] = { }; static const unsigned int LDO13_table[] = { - 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, 0, + 1200000, 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, }; static const unsigned int LDO13_suspend_table[] = { @@ -389,10 +389,10 @@ static struct pm8607_regulator_info pm8607_regulator_info[] = { PM8607_LDO( 7, LDO7, 0, 3, SUPPLIES_EN12, 1), PM8607_LDO( 8, LDO8, 0, 3, SUPPLIES_EN12, 2), PM8607_LDO( 9, LDO9, 0, 3, SUPPLIES_EN12, 3), - PM8607_LDO(10, LDO10, 0, 3, SUPPLIES_EN12, 4), + PM8607_LDO(10, LDO10, 0, 4, SUPPLIES_EN12, 4), PM8607_LDO(12, LDO12, 0, 4, SUPPLIES_EN12, 5), PM8607_LDO(13, VIBRATOR_SET, 1, 3, VIBRATOR_SET, 0), - PM8607_LDO(14, LDO14, 0, 4, SUPPLIES_EN12, 6), + PM8607_LDO(14, LDO14, 0, 3, SUPPLIES_EN12, 6), }; static int __devinit pm8607_regulator_probe(struct platform_device *pdev) diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index ee3c122c059..729fb843a2f 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -57,6 +57,7 @@ struct sam9_rtc { void __iomem *rtt; struct rtc_device *rtcdev; u32 imr; + void __iomem *gpbr; }; #define rtt_readl(rtc, field) \ @@ -65,9 +66,9 @@ struct sam9_rtc { __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field) #define gpbr_readl(rtc) \ - at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR) + __raw_readl((rtc)->gpbr) #define gpbr_writel(rtc, val) \ - at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val)) + __raw_writel((val), (rtc)->gpbr) /* * Read current time and date in RTC @@ -287,16 +288,19 @@ static const struct rtc_class_ops at91_rtc_ops = { /* * Initialize and install RTC driver */ -static int __init at91_rtc_probe(struct platform_device *pdev) +static int __devinit at91_rtc_probe(struct platform_device *pdev) { - struct resource *r; + struct resource *r, *r_gpbr; struct sam9_rtc *rtc; int ret; u32 mr; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) + r_gpbr = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!r || !r_gpbr) { + dev_err(&pdev->dev, "need 2 ressources\n"); return -ENODEV; + } rtc = kzalloc(sizeof *rtc, GFP_KERNEL); if (!rtc) @@ -314,6 +318,13 @@ static int __init at91_rtc_probe(struct platform_device *pdev) goto fail; } + rtc->gpbr = ioremap(r_gpbr->start, resource_size(r_gpbr)); + if (!rtc->gpbr) { + dev_err(&pdev->dev, "failed to map gpbr registers, aborting.\n"); + ret = -ENOMEM; + goto fail_gpbr; + } + mr = rtt_readl(rtc, MR); /* unless RTT is counting at 1 Hz, re-initialize it */ @@ -340,7 +351,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev) if (ret) { dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); rtc_device_unregister(rtc->rtcdev); - goto fail; + goto fail_register; } /* NOTE: sam9260 rev A silicon has a ROM bug which resets the @@ -356,6 +367,8 @@ static int __init at91_rtc_probe(struct platform_device *pdev) return 0; fail_register: + iounmap(rtc->gpbr); +fail_gpbr: iounmap(rtc->rtt); fail: platform_set_drvdata(pdev, NULL); @@ -366,7 +379,7 @@ fail: /* * Disable and remove the RTC driver */ -static int __exit at91_rtc_remove(struct platform_device *pdev) +static int __devexit at91_rtc_remove(struct platform_device *pdev) { struct sam9_rtc *rtc = platform_get_drvdata(pdev); u32 mr = rtt_readl(rtc, MR); @@ -377,6 +390,7 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) rtc_device_unregister(rtc->rtcdev); + iounmap(rtc->gpbr); iounmap(rtc->rtt); platform_set_drvdata(pdev, NULL); kfree(rtc); @@ -440,63 +454,20 @@ static int at91_rtc_resume(struct platform_device *pdev) #endif static struct platform_driver at91_rtc_driver = { - .driver.name = "rtc-at91sam9", - .driver.owner = THIS_MODULE, - .remove = __exit_p(at91_rtc_remove), + .probe = at91_rtc_probe, + .remove = __devexit_p(at91_rtc_remove), .shutdown = at91_rtc_shutdown, .suspend = at91_rtc_suspend, .resume = at91_rtc_resume, + .driver = { + .name = "rtc-at91sam9", + .owner = THIS_MODULE, + }, }; -/* Chips can have more than one RTT module, and they can be used for more - * than just RTCs. So we can't just register as "the" RTT driver. - * - * A normal approach in such cases is to create a library to allocate and - * free the modules. Here we just use bus_find_device() as like such a - * library, binding directly ... no runtime "library" footprint is needed. - */ -static int __init at91_rtc_match(struct device *dev, void *v) -{ - struct platform_device *pdev = to_platform_device(dev); - int ret; - - /* continue searching if this isn't the RTT we need */ - if (strcmp("at91_rtt", pdev->name) != 0 - || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT) - goto fail; - - /* else we found it ... but fail unless we can bind to the RTC driver */ - if (dev->driver) { - dev_dbg(dev, "busy, can't use as RTC!\n"); - goto fail; - } - dev->driver = &at91_rtc_driver.driver; - if (device_attach(dev) == 0) { - dev_dbg(dev, "can't attach RTC!\n"); - goto fail; - } - ret = at91_rtc_probe(pdev); - if (ret == 0) - return true; - - dev_dbg(dev, "RTC probe err %d!\n", ret); -fail: - return false; -} - static int __init at91_rtc_init(void) { - int status; - struct device *rtc; - - status = platform_driver_register(&at91_rtc_driver); - if (status) - return status; - rtc = bus_find_device(&platform_bus_type, NULL, - NULL, at91_rtc_match); - if (!rtc) - platform_driver_unregister(&at91_rtc_driver); - return rtc ? 0 : -ENODEV; + return platform_driver_register(&at91_rtc_driver); } module_init(at91_rtc_init); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 70880be2601..2617b1ed470 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -18,12 +18,12 @@ #include <linux/hdreg.h> /* HDIO_GETGEO */ #include <linux/bio.h> #include <linux/module.h> +#include <linux/compat.h> #include <linux/init.h> #include <asm/debug.h> #include <asm/idals.h> #include <asm/ebcdic.h> -#include <asm/compat.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/cio.h> diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index f1a2016829f..792c69e78fe 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -13,6 +13,7 @@ #define KMSG_COMPONENT "dasd" #include <linux/interrupt.h> +#include <linux/compat.h> #include <linux/major.h> #include <linux/fs.h> #include <linux/blkpg.h> diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 934458ad55e..e71a50d4b22 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -87,6 +87,7 @@ struct raw3215_info { struct tty_struct *tty; /* pointer to tty structure if present */ struct raw3215_req *queued_read; /* pointer to queued read requests */ struct raw3215_req *queued_write;/* pointer to queued write requests */ + struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */ wait_queue_head_t empty_wait; /* wait queue for flushing */ struct timer_list timer; /* timer for delayed output */ int line_pos; /* position on the line (for tabs) */ @@ -334,19 +335,23 @@ static inline void raw3215_try_io(struct raw3215_info *raw) } /* + * Call tty_wakeup from tasklet context + */ +static void raw3215_wakeup(unsigned long data) +{ + struct raw3215_info *raw = (struct raw3215_info *) data; + tty_wakeup(raw->tty); +} + +/* * Try to start the next IO and wake up processes waiting on the tty. */ static void raw3215_next_io(struct raw3215_info *raw) { - struct tty_struct *tty; - raw3215_mk_write_req(raw); raw3215_try_io(raw); - tty = raw->tty; - if (tty != NULL && - RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) { - tty_wakeup(tty); - } + if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) + tasklet_schedule(&raw->tlet); } /* @@ -682,6 +687,7 @@ static int raw3215_probe (struct ccw_device *cdev) return -ENOMEM; } init_waitqueue_head(&raw->empty_wait); + tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw); dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; @@ -901,6 +907,7 @@ static int __init con3215_init(void) raw->flags |= RAW3215_FIXED; init_waitqueue_head(&raw->empty_wait); + tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw); /* Request the console irq */ if (raw3215_startup(raw) != 0) { @@ -966,6 +973,7 @@ static void tty3215_close(struct tty_struct *tty, struct file * filp) tty->closing = 1; /* Shutdown the terminal */ raw3215_shutdown(raw); + tasklet_kill(&raw->tlet); tty->closing = 0; raw->tty = NULL; } diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index e71298158f9..911704571b9 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -11,6 +11,7 @@ #include <linux/console.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/compat.h> #include <linux/module.h> #include <linux/list.h> #include <linux/slab.h> diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c index 75bde6a8b7d..89c03e6b1c0 100644 --- a/drivers/s390/char/vmcp.c +++ b/drivers/s390/char/vmcp.c @@ -13,6 +13,7 @@ #include <linux/fs.h> #include <linux/init.h> +#include <linux/compat.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/slab.h> diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c index 0c87b0fc771..8f9a1a38449 100644 --- a/drivers/s390/cio/chsc_sch.c +++ b/drivers/s390/cio/chsc_sch.c @@ -8,6 +8,7 @@ */ #include <linux/slab.h> +#include <linux/compat.h> #include <linux/device.h> #include <linux/module.h> #include <linux/uaccess.h> diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index 303dde09d29..fab2c2592a9 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -11,6 +11,7 @@ #define KMSG_COMPONENT "zfcp" #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt +#include <linux/compat.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/miscdevice.h> diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 53a31c753cb..20c4557f5ab 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -364,10 +364,7 @@ static void release_controller(struct kref *kref) struct rdac_controller *ctlr; ctlr = container_of(kref, struct rdac_controller, kref); - flush_workqueue(kmpath_rdacd); - spin_lock(&list_lock); list_del(&ctlr->node); - spin_unlock(&list_lock); kfree(ctlr); } @@ -376,20 +373,17 @@ static struct rdac_controller *get_controller(int index, char *array_name, { struct rdac_controller *ctlr, *tmp; - spin_lock(&list_lock); - list_for_each_entry(tmp, &ctlr_list, node) { if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) && (tmp->index == index) && (tmp->host == sdev->host)) { kref_get(&tmp->kref); - spin_unlock(&list_lock); return tmp; } } ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); if (!ctlr) - goto done; + return NULL; /* initialize fields of controller */ memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN); @@ -405,8 +399,7 @@ static struct rdac_controller *get_controller(int index, char *array_name, INIT_WORK(&ctlr->ms_work, send_mode_select); INIT_LIST_HEAD(&ctlr->ms_head); list_add(&ctlr->node, &ctlr_list); -done: - spin_unlock(&list_lock); + return ctlr; } @@ -517,9 +510,12 @@ static int initialize_controller(struct scsi_device *sdev, index = 0; else index = 1; + + spin_lock(&list_lock); h->ctlr = get_controller(index, array_name, array_id, sdev); if (!h->ctlr) err = SCSI_DH_RES_TEMP_UNAVAIL; + spin_unlock(&list_lock); } return err; } @@ -906,7 +902,9 @@ static int rdac_bus_attach(struct scsi_device *sdev) return 0; clean_ctlr: + spin_lock(&list_lock); kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); failed: kfree(scsi_dh_data); @@ -921,14 +919,19 @@ static void rdac_bus_detach( struct scsi_device *sdev ) struct rdac_dh_data *h; unsigned long flags; - spin_lock_irqsave(sdev->request_queue->queue_lock, flags); scsi_dh_data = sdev->scsi_dh_data; + h = (struct rdac_dh_data *) scsi_dh_data->buf; + if (h->ctlr && h->ctlr->ms_queued) + flush_workqueue(kmpath_rdacd); + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); sdev->scsi_dh_data = NULL; spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); - h = (struct rdac_dh_data *) scsi_dh_data->buf; + spin_lock(&list_lock); if (h->ctlr) kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); kfree(scsi_dh_data); module_put(THIS_MODULE); sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 67b169b7a5b..b538f0883fd 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4613,11 +4613,13 @@ static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd) ENTER; ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata; - dev_err(&ioa_cfg->pdev->dev, - "Adapter being reset as a result of error recovery.\n"); + if (!ioa_cfg->in_reset_reload) { + dev_err(&ioa_cfg->pdev->dev, + "Adapter being reset as a result of error recovery.\n"); - if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) - ioa_cfg->sdt_state = GET_DUMP; + if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) + ioa_cfg->sdt_state = GET_DUMP; + } rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV); @@ -4907,7 +4909,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) struct ipr_ioa_cfg *ioa_cfg; struct ipr_resource_entry *res; struct ipr_cmd_pkt *cmd_pkt; - u32 ioasc; + u32 ioasc, int_reg; int op_found = 0; ENTER; @@ -4920,7 +4922,17 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) */ if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead) return FAILED; - if (!res || !ipr_is_gscsi(res)) + if (!res) + return FAILED; + + /* + * If we are aborting a timed out op, chances are that the timeout was caused + * by a still not detected EEH error. In such cases, reading a register will + * trigger the EEH recovery infrastructure. + */ + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); + + if (!ipr_is_gscsi(res)) return FAILED; list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) { diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 1a65d651423..418391b1c36 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1848,9 +1848,11 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) if (state == SCIC_RESET || state == SCIC_INITIALIZING || state == SCIC_INITIALIZED) { + u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version : + ISCI_ROM_VER_1_0; if (sci_oem_parameters_validate(&ihost->oem_parameters, - pci_info->orom->hdr.version)) + oem_version)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; return SCI_SUCCESS; diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 0b2c9558366..a78036f5e1a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -4548,7 +4548,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n", ioc->name, __func__); r = 0; - goto out; + goto out_unlocked; } if (mpt2sas_fwfault_debug) @@ -4604,6 +4604,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); mutex_unlock(&ioc->reset_in_progress_mutex); + out_unlocked: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name, __func__)); return r; diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index b31a8e3841d..d4ed9eb5265 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -69,10 +69,10 @@ #ifndef SCSI_OSD_MAJOR # define SCSI_OSD_MAJOR 260 #endif -#define SCSI_OSD_MAX_MINOR 64 +#define SCSI_OSD_MAX_MINOR MINORMASK static const char osd_name[] = "osd"; -static const char *osd_version_string = "open-osd 0.2.0"; +static const char *osd_version_string = "open-osd 0.2.1"; MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>"); MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko"); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index a2f1b3043df..9f41b3b4358 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1036,8 +1036,7 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr, vha->device_flags & DFLG_NO_CABLE) len = snprintf(buf, PAGE_SIZE, "Link Down\n"); else if (atomic_read(&vha->loop_state) != LOOP_READY || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + qla2x00_reset_active(vha)) len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n"); else { len = snprintf(buf, PAGE_SIZE, "Link Up - "); @@ -1359,8 +1358,7 @@ qla2x00_thermal_temp_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "\n"); temp = frac = 0; - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + if (qla2x00_reset_active(vha)) ql_log(ql_log_warn, vha, 0x707b, "ISP reset active.\n"); else if (!vha->hw->flags.eeh_busy) @@ -1379,8 +1377,7 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr, int rval = QLA_FUNCTION_FAILED; uint16_t state[5]; - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + if (qla2x00_reset_active(vha)) ql_log(ql_log_warn, vha, 0x707c, "ISP reset active.\n"); else if (!vha->hw->flags.eeh_busy) @@ -1693,9 +1690,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) if (IS_FWI2_CAPABLE(ha)) { rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma); } else if (atomic_read(&base_vha->loop_state) == LOOP_READY && - !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) && - !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) && - !ha->dpc_active) { + !qla2x00_reset_active(vha) && !ha->dpc_active) { /* Must be in a 'READY' state for statistics retrieval. */ rval = qla2x00_get_link_status(base_vha, base_vha->loop_id, stats, stats_dma); diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index b1d0f936bf2..1682e2e4201 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job) goto exit_fcp_prio_cfg; } - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ret = -EBUSY; - goto exit_fcp_prio_cfg; - } - /* Get the sub command */ oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; @@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) dma_addr_t rsp_data_dma; uint32_t rsp_data_len; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n"); - return -EBUSY; - } - if (!vha->flags.online) { ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n"); return -EIO; @@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job) int rval = 0; uint32_t flag; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n"); - return -EBUSY; - } - if (!IS_QLA84XX(ha)) { ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n"); return -EINVAL; @@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job) uint32_t flag; uint32_t fw_ver; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) - return -EBUSY; - if (!IS_QLA84XX(ha)) { ql_dbg(ql_dbg_user, vha, 0x7032, "Not 84xx, exiting.\n"); @@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) uint32_t data_len = 0; uint32_t dma_direction = DMA_NONE; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7039, - "Abort active or needed.\n"); - return -EBUSY; - } - if (!IS_QLA84XX(ha)) { ql_log(ql_log_warn, vha, 0x703a, "Not 84xx, exiting.\n"); @@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) bsg_job->reply->reply_payload_rcv_len = 0; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n"); - return -EBUSY; - } - if (!IS_IIDMA_CAPABLE(vha->hw)) { ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n"); return -EINVAL; @@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) vha = shost_priv(host); } + if (qla2x00_reset_active(vha)) { + ql_dbg(ql_dbg_user, vha, 0x709f, + "BSG: ISP abort active/needed -- cmd=%d.\n", + bsg_job->request->msgcode); + bsg_job->reply->result = (DID_ERROR << 16); + bsg_job->job_done(bsg_job); + return -EBUSY; + } + ql_dbg(ql_dbg_user, vha, 0x7000, "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode); diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 7c54624b5b1..45cbf0ba624 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -19,7 +19,8 @@ * | DPC Thread | 0x401c | | * | Async Events | 0x5057 | 0x5052 | * | Timer Routines | 0x6011 | 0x600e,0x600f | - * | User Space Interactions | 0x709e | | + * | User Space Interactions | 0x709e | 0x7018,0x702e | + * | | | 0x7039,0x7045 | * | Task Management | 0x803c | 0x8025-0x8026 | * | | | 0x800b,0x8039 | * | AER/EEH | 0x900f | | diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index a6a4eebce4a..af1003f9de1 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -44,6 +44,7 @@ * ISP2100 HBAs. */ #define MAILBOX_REGISTER_COUNT_2100 8 +#define MAILBOX_REGISTER_COUNT_2200 24 #define MAILBOX_REGISTER_COUNT 32 #define QLA2200A_RISC_ROM_VER 4 diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 9902834e0b7..7cc4f36cd53 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -131,3 +131,16 @@ qla2x00_hba_err_chk_enabled(srb_t *sp) } return 0; } + +static inline int +qla2x00_reset_active(scsi_qla_host_t *vha) +{ + scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev); + + /* Test appropriate base-vha and vha flags. */ + return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) || + test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); +} diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e804585cc59..349843ea32f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2090,7 +2090,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, break; case CT_IOCB_TYPE: qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE); - clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags); break; case ELS_IOCB_TYPE: qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 34344d3f865..08f1d01bdc1 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -342,6 +342,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + /* Allow next mbx cmd to come in. */ + complete(&ha->mbx_cmd_comp); if (ha->isp_ops->abort_isp(vha)) { /* Failed. retry later. */ set_bit(ISP_ABORT_NEEDED, @@ -350,6 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); ql_dbg(ql_dbg_mbx, base_vha, 0x101f, "Finished abort_isp.\n"); + goto mbx_done; } } } @@ -358,6 +361,7 @@ premature_exit: /* Allow next mbx cmd to come in. */ complete(&ha->mbx_cmd_comp); +mbx_done: if (rval) { ql_dbg(ql_dbg_mbx, base_vha, 0x1020, "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n", @@ -2581,7 +2585,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha) ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__); mcp->mb[0] = MBC_STOP_FIRMWARE; - mcp->out_mb = MBX_0; + mcp->mb[1] = 0; + mcp->out_mb = MBX_1|MBX_0; mcp->in_mb = MBX_0; mcp->tov = 5; mcp->flags = 0; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 1cd46cd7ff9..270ba3130fd 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -1165,19 +1165,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha) qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); else qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); - - /* reset ms */ - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val |= (1 << 1); - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - msleep(20); - - /* unreset ms */ - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val &= ~(1 << 1); - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - msleep(20); - qla82xx_rom_unlock(ha); /* Read the signature value from the flash. @@ -3392,7 +3379,7 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) QLA82XX_CRB_PEG_NET_3 + 0x3c), qla82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c)); - if (LSW(MSB(halt_status)) == 0x67) + if (((halt_status & 0x1fffff00) >> 8) == 0x67) ql_log(ql_log_warn, vha, 0xb052, "Firmware aborted with " "error code 0x00006700. Device is " diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4ed1e4a96b9..036030c9533 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -625,6 +625,12 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) cmd->result = DID_NO_CONNECT << 16; goto qc24_fail_command; } + + if (!fcport) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&base_vha->loop_state) == LOOP_DEAD) { @@ -877,6 +883,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) spin_unlock_irqrestore(&ha->hardware_lock, flags); if (ha->isp_ops->abort_command(sp)) { + ret = FAILED; ql_dbg(ql_dbg_taskm, vha, 0x8003, "Abort command mbx failed cmd=%p.\n", cmd); } else { @@ -1124,7 +1131,6 @@ static int qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *vha = shost_priv(cmd->device->host); - fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; struct qla_hw_data *ha = vha->hw; int ret = FAILED; unsigned int id, lun; @@ -1133,15 +1139,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) id = cmd->device->id; lun = cmd->device->lun; - if (!fcport) { - return ret; - } - - ret = fc_block_scsi_eh(cmd); - if (ret != 0) - return ret; - ret = FAILED; - ql_log(ql_log_info, vha, 0x8018, "ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun); @@ -2047,7 +2044,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_data_off = ~0; ha->isp_ops = &qla2100_isp_ops; } else if (IS_QLA2200(ha)) { - ha->mbx_count = MAILBOX_REGISTER_COUNT; + ha->mbx_count = MAILBOX_REGISTER_COUNT_2200; req_length = REQUEST_ENTRY_CNT_2200; rsp_length = RESPONSE_ENTRY_CNT_2100; ha->max_loop_id = SNS_LAST_LOOP_ID_2100; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 23f33a6d52d..29d780c3804 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.12-k" +#define QLA2XXX_VERSION "8.03.07.13-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 78f1111158d..65253dfbe96 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -10,6 +10,8 @@ #include "ql4_def.h" #include "ql4_glbl.h" +#include <asm-generic/io-64-nonatomic-lo-hi.h> + #define MASK(n) DMA_BIT_MASK(n) #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff)) #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff)) @@ -655,27 +657,6 @@ static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha, return 0; } -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - -#ifndef writeq -static inline void writeq(__u64 val, volatile void __iomem *addr) -{ - writel(val, addr); - writel(val >> 32, addr+4); -} -#endif - static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha, u64 off, void *data, int size) { diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index bf8bf79e6a1..c4670642d02 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -7,6 +7,7 @@ #include <linux/pm_runtime.h> #include <linux/export.h> +#include <linux/async.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -92,6 +93,19 @@ static int scsi_bus_resume_common(struct device *dev) return err; } +static int scsi_bus_prepare(struct device *dev) +{ + if (scsi_is_sdev_device(dev)) { + /* sd probing uses async_schedule. Wait until it finishes. */ + async_synchronize_full(); + + } else if (scsi_is_host_device(dev)) { + /* Wait until async scanning is finished */ + scsi_complete_async_scans(); + } + return 0; +} + static int scsi_bus_suspend(struct device *dev) { return scsi_bus_suspend_common(dev, PMSG_SUSPEND); @@ -110,6 +124,7 @@ static int scsi_bus_poweroff(struct device *dev) #else /* CONFIG_PM_SLEEP */ #define scsi_bus_resume_common NULL +#define scsi_bus_prepare NULL #define scsi_bus_suspend NULL #define scsi_bus_freeze NULL #define scsi_bus_poweroff NULL @@ -218,6 +233,7 @@ void scsi_autopm_put_host(struct Scsi_Host *shost) #endif /* CONFIG_PM_RUNTIME */ const struct dev_pm_ops scsi_bus_pm_ops = { + .prepare = scsi_bus_prepare, .suspend = scsi_bus_suspend, .resume = scsi_bus_resume_common, .freeze = scsi_bus_freeze, diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 68eadd1c67f..be4fa6d179b 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -109,6 +109,7 @@ extern void scsi_exit_procfs(void); #endif /* CONFIG_PROC_FS */ /* scsi_scan.c */ +extern int scsi_complete_async_scans(void); extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int, unsigned int, unsigned int, int); extern void scsi_forget_host(struct Scsi_Host *); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 89da43f73c0..29c4c048097 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1815,6 +1815,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data) } spin_unlock(&async_scan_lock); + scsi_autopm_put_host(shost); scsi_host_put(shost); kfree(data); } @@ -1841,7 +1842,6 @@ static int do_scan_async(void *_data) do_scsi_scan_host(shost); scsi_finish_async_scan(data); - scsi_autopm_put_host(shost); return 0; } @@ -1869,7 +1869,7 @@ void scsi_scan_host(struct Scsi_Host *shost) p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no); if (IS_ERR(p)) do_scan_async(data); - /* scsi_autopm_put_host(shost) is called in do_scan_async() */ + /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */ } EXPORT_SYMBOL(scsi_scan_host); diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 45fee368b09..92d314a73f6 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk) return -EINVAL; } - clk->parent = clk->parent_table[val]; + clk_reparent(clk, clk->parent_table[val]); if (!clk->parent) { pr_err("sh_clk_init_parent: unable to set parent"); return -EINVAL; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 10605ecc99a..f9a6be7a9be 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1526,6 +1526,8 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns) atmel_pops.set_wake = fns->set_wake; } +struct platform_device *atmel_default_console_device; /* the serial console device */ + #ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void atmel_console_putchar(struct uart_port *port, int ch) { diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 5c8e3bba6c8..cdf4b2bfad8 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -36,6 +36,7 @@ #include <linux/circ_buf.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -44,6 +45,8 @@ #include <linux/io.h> #include <linux/slab.h> +#define PXA_NAME_LEN 8 + struct uart_pxa_port { struct uart_port port; unsigned char ier; @@ -51,7 +54,7 @@ struct uart_pxa_port { unsigned char mcr; unsigned int lsr_break_flag; struct clk *clk; - char *name; + char name[PXA_NAME_LEN]; }; static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) @@ -781,6 +784,31 @@ static const struct dev_pm_ops serial_pxa_pm_ops = { }; #endif +static struct of_device_id serial_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-uart", }, + { .compatible = "mrvl,mmp-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); + +static int serial_pxa_probe_dt(struct platform_device *pdev, + struct uart_pxa_port *sport) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + return 0; +} + static int serial_pxa_probe(struct platform_device *dev) { struct uart_pxa_port *sport; @@ -808,20 +836,16 @@ static int serial_pxa_probe(struct platform_device *dev) sport->port.irq = irqres->start; sport->port.fifosize = 64; sport->port.ops = &serial_pxa_pops; - sport->port.line = dev->id; sport->port.dev = &dev->dev; sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; sport->port.uartclk = clk_get_rate(sport->clk); - switch (dev->id) { - case 0: sport->name = "FFUART"; break; - case 1: sport->name = "BTUART"; break; - case 2: sport->name = "STUART"; break; - case 3: sport->name = "HWUART"; break; - default: - sport->name = "???"; - break; - } + ret = serial_pxa_probe_dt(dev, sport); + if (ret > 0) + sport->port.line = dev->id; + else if (ret < 0) + goto err_clk; + snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); sport->port.membase = ioremap(mmres->start, resource_size(mmres)); if (!sport->port.membase) { @@ -829,7 +853,7 @@ static int serial_pxa_probe(struct platform_device *dev) goto err_clk; } - serial_pxa_ports[dev->id] = sport; + serial_pxa_ports[sport->port.line] = sport; uart_add_one_port(&serial_pxa_reg, &sport->port); platform_set_drvdata(dev, sport); @@ -866,6 +890,7 @@ static struct platform_driver serial_pxa_driver = { #ifdef CONFIG_PM .pm = &serial_pxa_pm_ops, #endif + .of_match_table = serial_pxa_dt_ids, }, }; diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index d136b8f4c8a..81e2c0d9c17 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; dev->current_state = PCI_D0; - if (!dev->irq) { + /* The xHCI driver supports MSI and MSI-X, + * so don't fail if the BIOS doesn't provide a legacy IRQ. + */ + if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", pci_name(dev)); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index eb19cba34ac..e1282328fc2 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd, && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); - /* enable irqs just before we start the controller */ - if (usb_hcd_is_primary_hcd(hcd)) { + /* enable irqs just before we start the controller, + * if the BIOS provides legacy PCI irqs. + */ + if (usb_hcd_is_primary_hcd(hcd) && irqnum) { retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); if (retval) goto err_request_irq; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a0613d8f9be..265c2f675d0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_INIT3) goto init3; - /* After a resume, port power should still be on. + /* The superspeed hub except for root hub has to use Hub Depth + * value as an offset into the route string to locate the bits + * it uses to determine the downstream port number. So hub driver + * should send a set hub depth request to superspeed hub after + * the superspeed hub is set configuration in initialization or + * reset procedure. + * + * After a resume, port power should still be on. * For any other type of activation, turn it on. */ if (type != HUB_RESUME) { + if (hdev->parent && hub_is_superspeed(hdev)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(hub->intfdev, + "set hub depth failed\n"); + } /* Speed up system boot by using a delayed_work for the * hub's initial power-up delays. This is pretty awkward @@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub, goto fail; } - if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) { - ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), - HUB_SET_DEPTH, USB_RT_HUB, - hdev->level - 1, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - - if (ret < 0) { - message = "can't set hub depth"; - goto fail; - } - } - /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, * but the hub can/will return fewer bytes here. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7ecb68a6741..85ae4b46bb6 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -137,7 +137,7 @@ choice config USB_AT91 tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45 + depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45 help Many Atmel AT91 processors (such as the AT91RM2000) have a full speed USB Device Port with support for five configurable @@ -150,7 +150,7 @@ config USB_AT91 config USB_ATMEL_USBA tristate "Atmel USBA" select USB_GADGET_DUALSPEED - depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 143a7256b59..f99b3dc745b 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -41,6 +41,7 @@ #include <mach/board.h> #include <mach/cpu.h> #include <mach/at91sam9261_matrix.h> +#include <mach/at91_matrix.h> #include "at91_udc.h" @@ -910,9 +911,9 @@ static void pullup(struct at91_udc *udc, int is_on) } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) { u32 usbpucr; - usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR); + usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR); usbpucr |= AT91_MATRIX_USBPUCR_PUON; - at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr); + at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr); } } else { stop_activity(udc); @@ -928,9 +929,9 @@ static void pullup(struct at91_udc *udc, int is_on) } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) { u32 usbpucr; - usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR); + usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR); usbpucr &= ~AT91_MATRIX_USBPUCR_PUON; - at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr); + at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr); } clk_off(udc); } diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index e2fb6d583bd..ce9dffb0515 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -332,12 +332,12 @@ static int vbus_is_present(struct usba_udc *udc) static void toggle_bias(int is_on) { - unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR); + unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR); if (is_on) - at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN); + at91_pmc_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN); else - at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN)); + at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN)); } #else diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 77afabc77f9..8e855eb0bf8 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -448,10 +448,11 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ - gpio = irq_to_gpio(irq); for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { - if (pdata->overcurrent_pin[port] == gpio) + if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { + gpio = pdata->overcurrent_pin[port]; break; + } } if (port == ARRAY_SIZE(pdata->overcurrent_pin)) { diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ac53a662a6a..7732d69e49e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -872,7 +872,17 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && + pdev->class != PCI_CLASS_SERIAL_USB_OHCI && + pdev->class != PCI_CLASS_SERIAL_USB_EHCI && + pdev->class != PCI_CLASS_SERIAL_USB_XHCI) + return; + if (pci_enable_device(pdev) < 0) { + dev_warn(&pdev->dev, "Can't enable PCI device, " + "BIOS handoff failed.\n"); + return; + } if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) @@ -881,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) quirk_usb_disable_ehci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); + pci_disable_device(pdev); } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 35e257f79c7..557b6f32db8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + portsc = xhci_readl(xhci, xhci->usb2_ports[i]); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 36cbe2226a4..383fc857491 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, } /* - * Convert bInterval expressed in frames (in 1-255 range) to exponent of + * Convert bInterval expressed in microframes (in 1-255 range) to exponent of * microframes, rounded down to nearest power of 2. */ -static unsigned int xhci_parse_frame_interval(struct usb_device *udev, - struct usb_host_endpoint *ep) +static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, + struct usb_host_endpoint *ep, unsigned int desc_interval, + unsigned int min_exponent, unsigned int max_exponent) { unsigned int interval; - interval = fls(8 * ep->desc.bInterval) - 1; - interval = clamp_val(interval, 3, 10); - if ((1 << interval) != 8 * ep->desc.bInterval) + interval = fls(desc_interval) - 1; + interval = clamp_val(interval, min_exponent, max_exponent); + if ((1 << interval) != desc_interval) dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", ep->desc.bEndpointAddress, 1 << interval, - 8 * ep->desc.bInterval); + desc_interval); return interval; } +static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval, 0, 15); +} + + +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval * 8, 3, 10); +} + /* Return the polling or NAK interval. * * The polling interval is expressed in "microframes". If xHCI's Interval field @@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, /* Max NAK rate */ if (usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_bulk(&ep->desc)) { - interval = ep->desc.bInterval; + interval = xhci_parse_microframe_interval(udev, ep); break; } /* Fall through - SS and HS isoc/int have same decoding */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6bbe3c3a711..c939f5fdef9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* hcd->irq is -1, we have MSI */ return 0; + if (!pdev->irq) { + xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); + return -EINVAL; + } + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8dbf51a43c4..08a5575724c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -136,6 +136,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ + { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ + { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 39ed1f46cec..b54afceb961 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -788,7 +788,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), @@ -803,7 +802,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, @@ -828,7 +826,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, @@ -836,7 +833,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), @@ -846,7 +842,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) }, @@ -865,8 +860,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, @@ -887,28 +880,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, @@ -1083,127 +1066,27 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 8468eb769a2..75b838eff17 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -165,7 +165,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { @@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 2aac1953993..f140f1b9d5c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -49,6 +49,10 @@ #define MTS_MT9234ZBA_PRODUCT_ID 0xF115 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 +/* Abbott Diabetics vendor and product ids */ +#define ABBOTT_VENDOR_ID 0x1a61 +#define ABBOTT_PRODUCT_ID 0x3410 + /* Commands */ #define TI_GET_VERSION 0x01 #define TI_GET_PORT_STATUS 0x02 diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3dd7da9fd50..db51ba16dc0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us) struct Scsi_Host *host = us_to_host(us); /* If the device is really gone, cut short reset delays */ - if (us->pusb_dev->state == USB_STATE_NOTATTACHED) + if (us->pusb_dev->state == USB_STATE_NOTATTACHED) { set_bit(US_FLIDX_DISCONNECTING, &us->dflags); + wake_up(&us->delay_wait); + } - /* Prevent SCSI-scanning (if it hasn't started yet) - * and wait for the SCSI-scanning thread to stop. + /* Prevent SCSI scanning (if it hasn't started yet) + * or wait for the SCSI-scanning routine to stop. */ - set_bit(US_FLIDX_DONT_SCAN, &us->dflags); - wake_up(&us->delay_wait); - wait_for_completion(&us->scanning_done); + cancel_delayed_work_sync(&us->scan_dwork); + + /* Balance autopm calls if scanning was cancelled */ + if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags)) + usb_autopm_put_interface_no_suspend(us->pusb_intf); /* Removing the host will perform an orderly shutdown: caches * synchronized, disks spun down, etc. @@ -823,53 +827,28 @@ static void release_everything(struct us_data *us) scsi_host_put(us_to_host(us)); } -/* Thread to carry out delayed SCSI-device scanning */ -static int usb_stor_scan_thread(void * __us) +/* Delayed-work routine to carry out SCSI-device scanning */ +static void usb_stor_scan_dwork(struct work_struct *work) { - struct us_data *us = (struct us_data *)__us; + struct us_data *us = container_of(work, struct us_data, + scan_dwork.work); struct device *dev = &us->pusb_intf->dev; - dev_dbg(dev, "device found\n"); - - set_freezable(); + dev_dbg(dev, "starting scan\n"); - /* - * Wait for the timeout to expire or for a disconnect - * - * We can't freeze in this thread or we risk causing khubd to - * fail to freeze, but we can't be non-freezable either. Nor can - * khubd freeze while waiting for scanning to complete as it may - * hold the device lock, causing a hang when suspending devices. - * So instead of using wait_event_freezable(), explicitly test - * for (DONT_SCAN || freezing) in interruptible wait and proceed - * if any of DONT_SCAN, freezing or timeout has happened. - */ - if (delay_use > 0) { - dev_dbg(dev, "waiting for device to settle " - "before scanning\n"); - wait_event_interruptible_timeout(us->delay_wait, - test_bit(US_FLIDX_DONT_SCAN, &us->dflags) || - freezing(current), delay_use * HZ); + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) { + mutex_lock(&us->dev_mutex); + us->max_lun = usb_stor_Bulk_max_lun(us); + mutex_unlock(&us->dev_mutex); } + scsi_scan_host(us_to_host(us)); + dev_dbg(dev, "scan complete\n"); - /* If the device is still connected, perform the scanning */ - if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) { - - /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == USB_PR_BULK && - !(us->fflags & US_FL_SINGLE_LUN)) { - mutex_lock(&us->dev_mutex); - us->max_lun = usb_stor_Bulk_max_lun(us); - mutex_unlock(&us->dev_mutex); - } - scsi_scan_host(us_to_host(us)); - dev_dbg(dev, "scan complete\n"); - - /* Should we unbind if no devices were detected? */ - } + /* Should we unbind if no devices were detected? */ usb_autopm_put_interface(us->pusb_intf); - complete_and_exit(&us->scanning_done, 0); + clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags); } static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) @@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus, init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); - init_completion(&us->scanning_done); + INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork); /* Associate the us_data structure with the USB device */ result = associate_dev(us, intf); @@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1); /* Second part of general USB mass-storage probing */ int usb_stor_probe2(struct us_data *us) { - struct task_struct *th; int result; struct device *dev = &us->pusb_intf->dev; @@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; } - /* Start up the thread for delayed SCSI-device scanning */ - th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); - if (IS_ERR(th)) { - dev_warn(dev, - "Unable to start the device-scanning thread\n"); - complete(&us->scanning_done); - quiesce_and_remove_host(us); - result = PTR_ERR(th); - goto BadDevice; - } - + /* Submit the delayed_work for SCSI-device scanning */ usb_autopm_get_interface_no_resume(us->pusb_intf); - wake_up_process(th); + set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); + if (delay_use > 0) + dev_dbg(dev, "waiting for device to settle before scanning\n"); + queue_delayed_work(system_freezable_wq, &us->scan_dwork, + delay_use * HZ); return 0; /* We come here if there are any problems */ diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 7b0f2113632..75f70f04f37 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -47,6 +47,7 @@ #include <linux/blkdev.h> #include <linux/completion.h> #include <linux/mutex.h> +#include <linux/workqueue.h> #include <scsi/scsi_host.h> struct us_data; @@ -72,7 +73,7 @@ struct us_unusual_dev { #define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ -#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */ #define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ #define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ @@ -147,8 +148,8 @@ struct us_data { /* mutual exclusion and synchronization structures */ struct completion cmnd_ready; /* to sleep thread on */ struct completion notify; /* thread begin/end */ - wait_queue_head_t delay_wait; /* wait during scan, reset */ - struct completion scanning_done; /* wait for scan thread */ + wait_queue_head_t delay_wait; /* wait during reset */ + struct delayed_work scan_dwork; /* for async scanning */ /* subdriver information */ void *extra; /* Any extra data */ diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index 74d29b55290..408a9927be9 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -12,7 +12,7 @@ config PANEL_GENERIC_DPI config PANEL_DVI tristate "DVI output" - depends on OMAP2_DSS_DPI + depends on OMAP2_DSS_DPI && I2C help Driver for external monitors, connected via DVI. The driver uses i2c to read EDID information from the monitor. diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c index 052dc874cd3..87b3e25294c 100644 --- a/drivers/video/omap2/dss/apply.c +++ b/drivers/video/omap2/dss/apply.c @@ -1276,6 +1276,9 @@ int dss_ovl_enable(struct omap_overlay *ovl) spin_unlock_irqrestore(&data_lock, flags); + /* wait for overlay to be enabled */ + wait_pending_extra_info_updates(); + mutex_unlock(&apply_lock); return 0; @@ -1313,6 +1316,9 @@ int dss_ovl_disable(struct omap_overlay *ovl) spin_unlock_irqrestore(&data_lock, flags); + /* wait for the overlay to be disabled */ + wait_pending_extra_info_updates(); + mutex_unlock(&apply_lock); return 0; diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index d7aa3b05652..a36b934b2db 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -165,9 +165,25 @@ static int hdmi_runtime_get(void) DSSDBG("hdmi_runtime_get\n"); + /* + * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled. + * This should be removed later. + */ + r = dss_runtime_get(); + if (r < 0) + goto err_get_dss; + r = pm_runtime_get_sync(&hdmi.pdev->dev); WARN_ON(r < 0); - return r < 0 ? r : 0; + if (r < 0) + goto err_get_hdmi; + + return 0; + +err_get_hdmi: + dss_runtime_put(); +err_get_dss: + return r; } static void hdmi_runtime_put(void) @@ -178,6 +194,12 @@ static void hdmi_runtime_put(void) r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); + + /* + * HACK: This is added to complement the dss_runtime_get() call in + * hdmi_runtime_get(). This should be removed later. + */ + dss_runtime_put(); } int hdmi_init_display(struct omap_dss_device *dssdev) diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 2d72334ca3d..6847a478b45 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -479,14 +479,7 @@ int ti_hdmi_4xxx_read_edid(struct hdmi_ip_data *ip_data, bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data) { - int r; - - void __iomem *base = hdmi_core_sys_base(ip_data); - - /* HPD */ - r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1); - - return r == 1; + return gpio_get_value(ip_data->hpd_gpio); } static void hdmi_core_init(struct hdmi_core_video_config *video_cfg, diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f9975100d56..3a3fdc62c75 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c index d5aaca9cfa7..8497727d66d 100644 --- a/drivers/video/via/hw.c +++ b/drivers/video/via/hw.c @@ -1810,7 +1810,11 @@ static void hw_init(void) break; } + /* magic required on VX900 for correct modesetting on IGA1 */ + via_write_reg_mask(VIACR, 0x45, 0x00, 0x01); + /* probably this should go to the scaling code one day */ + via_write_reg_mask(VIACR, 0xFD, 0, 0x80); /* VX900 hw scale on IGA2 */ viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters)); /* Fill VPIT Parameters */ diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 95aeedf198f..958e5129c60 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -367,29 +367,45 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev) #ifdef CONFIG_PM static int virtballoon_freeze(struct virtio_device *vdev) { + struct virtio_balloon *vb = vdev->priv; + /* * The kthread is already frozen by the PM core before this * function is called. */ + while (vb->num_pages) + leak_balloon(vb, vb->num_pages); + update_balloon_size(vb); + /* Ensure we don't get any more requests from the host */ vdev->config->reset(vdev); vdev->config->del_vqs(vdev); return 0; } +static int restore_common(struct virtio_device *vdev) +{ + struct virtio_balloon *vb = vdev->priv; + int ret; + + ret = init_vqs(vdev->priv); + if (ret) + return ret; + + fill_balloon(vb, towards_target(vb)); + update_balloon_size(vb); + return 0; +} + static int virtballoon_thaw(struct virtio_device *vdev) { - return init_vqs(vdev->priv); + return restore_common(vdev); } static int virtballoon_restore(struct virtio_device *vdev) { struct virtio_balloon *vb = vdev->priv; - struct page *page, *page2; - - /* We're starting from a clean slate */ - vb->num_pages = 0; /* * If a request wasn't complete at the time of freezing, this @@ -397,12 +413,7 @@ static int virtballoon_restore(struct virtio_device *vdev) */ vb->need_stats_update = 0; - /* We don't have these pages in the balloon anymore! */ - list_for_each_entry_safe(page, page2, &vb->pages, lru) { - list_del(&page->lru); - totalram_pages++; - } - return init_vqs(vdev->priv); + return restore_common(vdev); } #endif diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 877b107f77a..df9e8f0e327 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1098,7 +1098,7 @@ config BOOKE_WDT_DEFAULT_TIMEOUT For Freescale Book-E processors, this is a number between 0 and 63. For other Book-E processors, this is a number between 0 and 3. - The value can be overidden by the wdt_period command-line parameter. + The value can be overridden by the wdt_period command-line parameter. # PPC64 Architecture diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index b3046dc4b56..7ceefd29ae1 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -51,7 +51,7 @@ static unsigned long at91wdt_busy; */ static inline void at91_wdt_stop(void) { - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN); + at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN); } /* @@ -59,9 +59,9 @@ static inline void at91_wdt_stop(void) */ static inline void at91_wdt_start(void) { - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | + at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); + at91_st_write(AT91_ST_CR, AT91_ST_WDRST); } /* @@ -69,7 +69,7 @@ static inline void at91_wdt_start(void) */ static inline void at91_wdt_reload(void) { - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); + at91_st_write(AT91_ST_CR, AT91_ST_WDRST); } /* ......................................................................... */ diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 337265b4730..7c0fdfca264 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -198,9 +198,13 @@ static long booke_wdt_ioctl(struct file *file, booke_wdt_period = tmp; #endif booke_wdt_set(); - return 0; + /* Fall */ case WDIOC_GETTIMEOUT: +#ifdef CONFIG_FSL_BOOKE + return put_user(period_to_sec(booke_wdt_period), p); +#else return put_user(booke_wdt_period, p); +#endif default: return -ENOTTY; } diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 8464ea1c36a..3c166d3f4e5 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -231,7 +231,7 @@ static int __devinit cru_detect(unsigned long map_entry, cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE; - set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE)); + set_memory_x((unsigned long)bios32_map, 2); asminline_call(&cmn_regs, bios32_entrypoint); if (cmn_regs.u1.ral != 0) { @@ -250,7 +250,8 @@ static int __devinit cru_detect(unsigned long map_entry, cru_rom_addr = ioremap(cru_physical_address, cru_length); if (cru_rom_addr) { - set_memory_x((unsigned long)cru_rom_addr, cru_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT); retval = 0; } } diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 8e210aafdfd..dfae030a7ef 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -264,7 +264,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev) wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (wdt_mem == NULL) { printk(KERN_INFO MODULE_NAME - "failed to get memory region resouce\n"); + "failed to get memory region resource\n"); return -ENOENT; } diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 4bc3744e14e..404172f02c9 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -312,18 +312,26 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) dev = &pdev->dev; wdt_dev = &pdev->dev; - /* get the memory region for the watchdog timer */ - wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (wdt_mem == NULL) { dev_err(dev, "no memory resource specified\n"); return -ENOENT; } + wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (wdt_irq == NULL) { + dev_err(dev, "no irq resource specified\n"); + ret = -ENOENT; + goto err; + } + + /* get the memory region for the watchdog timer */ + size = resource_size(wdt_mem); if (!request_mem_region(wdt_mem->start, size, pdev->name)) { dev_err(dev, "failed to get memory region\n"); - return -EBUSY; + ret = -EBUSY; + goto err; } wdt_base = ioremap(wdt_mem->start, size); @@ -335,29 +343,17 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) DBG("probe: mapped wdt_base=%p\n", wdt_base); - wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (wdt_irq == NULL) { - dev_err(dev, "no irq resource specified\n"); - ret = -ENOENT; - goto err_map; - } - - ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev); - if (ret != 0) { - dev_err(dev, "failed to install irq (%d)\n", ret); - goto err_map; - } - wdt_clock = clk_get(&pdev->dev, "watchdog"); if (IS_ERR(wdt_clock)) { dev_err(dev, "failed to find watchdog clock source\n"); ret = PTR_ERR(wdt_clock); - goto err_irq; + goto err_map; } clk_enable(wdt_clock); - if (s3c2410wdt_cpufreq_register() < 0) { + ret = s3c2410wdt_cpufreq_register(); + if (ret < 0) { printk(KERN_ERR PFX "failed to register cpufreq\n"); goto err_clk; } @@ -378,12 +374,18 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) "cannot start\n"); } + ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev); + if (ret != 0) { + dev_err(dev, "failed to install irq (%d)\n", ret); + goto err_cpufreq; + } + watchdog_set_nowayout(&s3c2410_wdd, nowayout); ret = watchdog_register_device(&s3c2410_wdd); if (ret) { dev_err(dev, "cannot register watchdog (%d)\n", ret); - goto err_cpufreq; + goto err_irq; } if (tmr_atboot && started == 0) { @@ -408,23 +410,26 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) return 0; + err_irq: + free_irq(wdt_irq->start, pdev); + err_cpufreq: s3c2410wdt_cpufreq_deregister(); err_clk: clk_disable(wdt_clock); clk_put(wdt_clock); - - err_irq: - free_irq(wdt_irq->start, pdev); + wdt_clock = NULL; err_map: iounmap(wdt_base); err_req: release_mem_region(wdt_mem->start, size); - wdt_mem = NULL; + err: + wdt_irq = NULL; + wdt_mem = NULL; return ret; } @@ -432,18 +437,18 @@ static int __devexit s3c2410wdt_remove(struct platform_device *dev) { watchdog_unregister_device(&s3c2410_wdd); + free_irq(wdt_irq->start, dev); + s3c2410wdt_cpufreq_deregister(); clk_disable(wdt_clock); clk_put(wdt_clock); wdt_clock = NULL; - free_irq(wdt_irq->start, dev); - wdt_irq = NULL; - iounmap(wdt_base); release_mem_region(wdt_mem->start, resource_size(wdt_mem)); + wdt_irq = NULL; wdt_mem = NULL; return 0; } diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index d8d8e7ba6a1..eb1cc92cd67 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -110,6 +110,7 @@ struct autofs_sb_info { int sub_version; int min_proto; int max_proto; + int compat_daemon; unsigned long exp_timeout; unsigned int type; int reghost_enabled; diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 76741d8d778..85f1fcdb30e 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -385,6 +385,7 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp, sbi->pipefd = pipefd; sbi->pipe = pipe; sbi->catatonic = 0; + sbi->compat_daemon = is_compat_task(); } out: mutex_unlock(&sbi->wq_mutex); diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 450f529a4ea..1feb68ecef9 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -124,6 +124,7 @@ start: /* Negative dentry - try next */ if (!simple_positive(q)) { spin_unlock(&p->d_lock); + lock_set_subclass(&q->d_lock.dep_map, 0, _RET_IP_); p = q; goto again; } @@ -186,6 +187,7 @@ again: /* Negative dentry - try next */ if (!simple_positive(ret)) { spin_unlock(&p->d_lock); + lock_set_subclass(&ret->d_lock.dep_map, 0, _RET_IP_); p = ret; goto again; } diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c index e16980b00b8..06858d95512 100644 --- a/fs/autofs4/inode.c +++ b/fs/autofs4/inode.c @@ -19,6 +19,7 @@ #include <linux/parser.h> #include <linux/bitops.h> #include <linux/magic.h> +#include <linux/compat.h> #include "autofs_i.h" #include <linux/module.h> @@ -224,6 +225,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent) set_autofs_type_indirect(&sbi->type); sbi->min_proto = 0; sbi->max_proto = 0; + sbi->compat_daemon = is_compat_task(); mutex_init(&sbi->wq_mutex); mutex_init(&sbi->pipe_mutex); spin_lock_init(&sbi->fs_lock); diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c index da8876d38a7..9c098db4334 100644 --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -91,7 +91,24 @@ static int autofs4_write(struct autofs_sb_info *sbi, return (bytes > 0); } - + +/* + * The autofs_v5 packet was misdesigned. + * + * The packets are identical on x86-32 and x86-64, but have different + * alignment. Which means that 'sizeof()' will give different results. + * Fix it up for the case of running 32-bit user mode on a 64-bit kernel. + */ +static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi) +{ + size_t pktsz = sizeof(struct autofs_v5_packet); +#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT) + if (sbi->compat_daemon > 0) + pktsz -= 4; +#endif + return pktsz; +} + static void autofs4_notify_daemon(struct autofs_sb_info *sbi, struct autofs_wait_queue *wq, int type) @@ -155,8 +172,7 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi, { struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet; - pktsz = sizeof(*packet); - + pktsz = autofs_v5_packet_size(sbi); packet->wait_queue_token = wq->wait_queue_token; packet->len = wq->name.len; memcpy(packet->name, wq->name.name, wq->name.len); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index bcb884e2d61..07d096c4992 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1421,7 +1421,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t, for (i = 1; i < view->n; ++i) { const struct user_regset *regset = &view->regsets[i]; do_thread_regset_writeback(t->task, regset); - if (regset->core_note_type && + if (regset->core_note_type && regset->get && (!regset->active || regset->active(t->task, regset))) { int ret; size_t size = regset->n * regset->size; diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 633c701a287..98f6bf10bbd 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -892,6 +892,8 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, if (eb != eb_in) free_extent_buffer(eb); ret = inode_ref_info(parent, 0, fs_root, path, &found_key); + if (ret > 0) + ret = -ENOENT; if (ret) break; next_inum = found_key.offset; diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index b669a7d8e49..d986824bb2b 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -644,7 +644,7 @@ static struct btrfsic_dev_state *btrfsic_dev_state_hashtable_lookup( static int btrfsic_process_superblock(struct btrfsic_state *state, struct btrfs_fs_devices *fs_devices) { - int ret; + int ret = 0; struct btrfs_super_block *selected_super; struct list_head *dev_head = &fs_devices->devices; struct btrfs_device *device; diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 14f1c5a0b2d..d02c27cd14c 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -588,6 +588,8 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, page_offset(bio->bi_io_vec->bv_page), PAGE_CACHE_SIZE); read_unlock(&em_tree->lock); + if (!em) + return -EIO; compressed_len = em->block_len; cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS); diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 27ebe61d3cc..80b6486fd5e 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -886,7 +886,7 @@ struct btrfs_block_rsv { u64 reserved; struct btrfs_space_info *space_info; spinlock_t lock; - unsigned int full:1; + unsigned int full; }; /* diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 811d9f918b1..534266fe505 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2260,6 +2260,12 @@ int open_ctree(struct super_block *sb, goto fail_sb_buffer; } + if (sectorsize < PAGE_SIZE) { + printk(KERN_WARNING "btrfs: Incompatible sector size " + "found on %s\n", sb->s_id); + goto fail_sb_buffer; + } + mutex_lock(&fs_info->chunk_mutex); ret = btrfs_read_sys_array(tree_root); mutex_unlock(&fs_info->chunk_mutex); @@ -2301,6 +2307,12 @@ int open_ctree(struct super_block *sb, btrfs_close_extra_devices(fs_devices); + if (!fs_devices->latest_bdev) { + printk(KERN_CRIT "btrfs: failed to read devices on %s\n", + sb->s_id); + goto fail_tree_roots; + } + retry_root_backup: blocksize = btrfs_level_size(tree_root, btrfs_super_root_level(disk_super)); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 283af7a676a..37e0a800d34 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3312,7 +3312,8 @@ commit_trans: } data_sinfo->bytes_may_use += bytes; trace_btrfs_space_reservation(root->fs_info, "space_info", - (u64)data_sinfo, bytes, 1); + (u64)(unsigned long)data_sinfo, + bytes, 1); spin_unlock(&data_sinfo->lock); return 0; @@ -3333,7 +3334,8 @@ void btrfs_free_reserved_data_space(struct inode *inode, u64 bytes) spin_lock(&data_sinfo->lock); data_sinfo->bytes_may_use -= bytes; trace_btrfs_space_reservation(root->fs_info, "space_info", - (u64)data_sinfo, bytes, 0); + (u64)(unsigned long)data_sinfo, + bytes, 0); spin_unlock(&data_sinfo->lock); } @@ -3611,12 +3613,15 @@ static int may_commit_transaction(struct btrfs_root *root, if (space_info != delayed_rsv->space_info) return -ENOSPC; + spin_lock(&space_info->lock); spin_lock(&delayed_rsv->lock); - if (delayed_rsv->size < bytes) { + if (space_info->bytes_pinned + delayed_rsv->size < bytes) { spin_unlock(&delayed_rsv->lock); + spin_unlock(&space_info->lock); return -ENOSPC; } spin_unlock(&delayed_rsv->lock); + spin_unlock(&space_info->lock); commit: trans = btrfs_join_transaction(root); @@ -3695,9 +3700,9 @@ again: if (used + orig_bytes <= space_info->total_bytes) { space_info->bytes_may_use += orig_bytes; trace_btrfs_space_reservation(root->fs_info, - "space_info", - (u64)space_info, - orig_bytes, 1); + "space_info", + (u64)(unsigned long)space_info, + orig_bytes, 1); ret = 0; } else { /* @@ -3766,9 +3771,9 @@ again: if (used + num_bytes < space_info->total_bytes + avail) { space_info->bytes_may_use += orig_bytes; trace_btrfs_space_reservation(root->fs_info, - "space_info", - (u64)space_info, - orig_bytes, 1); + "space_info", + (u64)(unsigned long)space_info, + orig_bytes, 1); ret = 0; } else { wait_ordered = true; @@ -3913,8 +3918,8 @@ static void block_rsv_release_bytes(struct btrfs_fs_info *fs_info, spin_lock(&space_info->lock); space_info->bytes_may_use -= num_bytes; trace_btrfs_space_reservation(fs_info, "space_info", - (u64)space_info, - num_bytes, 0); + (u64)(unsigned long)space_info, + num_bytes, 0); space_info->reservation_progress++; spin_unlock(&space_info->lock); } @@ -4105,7 +4110,7 @@ static u64 calc_global_metadata_size(struct btrfs_fs_info *fs_info) num_bytes += div64_u64(data_used + meta_used, 50); if (num_bytes * 3 > meta_used) - num_bytes = div64_u64(meta_used, 3); + num_bytes = div64_u64(meta_used, 3) * 2; return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10); } @@ -4132,14 +4137,14 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) block_rsv->reserved += num_bytes; sinfo->bytes_may_use += num_bytes; trace_btrfs_space_reservation(fs_info, "space_info", - (u64)sinfo, num_bytes, 1); + (u64)(unsigned long)sinfo, num_bytes, 1); } if (block_rsv->reserved >= block_rsv->size) { num_bytes = block_rsv->reserved - block_rsv->size; sinfo->bytes_may_use -= num_bytes; trace_btrfs_space_reservation(fs_info, "space_info", - (u64)sinfo, num_bytes, 0); + (u64)(unsigned long)sinfo, num_bytes, 0); sinfo->reservation_progress++; block_rsv->reserved = block_rsv->size; block_rsv->full = 1; @@ -4192,7 +4197,8 @@ void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans, if (!trans->bytes_reserved) return; - trace_btrfs_space_reservation(root->fs_info, "transaction", (u64)trans, + trace_btrfs_space_reservation(root->fs_info, "transaction", + (u64)(unsigned long)trans, trans->bytes_reserved, 0); btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved); trans->bytes_reserved = 0; @@ -4710,9 +4716,9 @@ static int btrfs_update_reserved_bytes(struct btrfs_block_group_cache *cache, space_info->bytes_reserved += num_bytes; if (reserve == RESERVE_ALLOC) { trace_btrfs_space_reservation(cache->fs_info, - "space_info", - (u64)space_info, - num_bytes, 0); + "space_info", + (u64)(unsigned long)space_info, + num_bytes, 0); space_info->bytes_may_use -= num_bytes; } } @@ -7886,9 +7892,16 @@ int btrfs_trim_fs(struct btrfs_root *root, struct fstrim_range *range) u64 start; u64 end; u64 trimmed = 0; + u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy); int ret = 0; - cache = btrfs_lookup_block_group(fs_info, range->start); + /* + * try to trim all FS space, our block group may start from non-zero. + */ + if (range->len == total_bytes) + cache = btrfs_lookup_first_block_group(fs_info, range->start); + else + cache = btrfs_lookup_block_group(fs_info, range->start); while (cache) { if (cache->key.objectid >= (range->start + range->len)) { diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index fcf77e1ded4..a55fbe6252d 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -513,6 +513,15 @@ hit_next: WARN_ON(state->end < start); last_end = state->end; + if (state->end < end && !need_resched()) + next_node = rb_next(&state->rb_node); + else + next_node = NULL; + + /* the state doesn't have the wanted bits, go ahead */ + if (!(state->state & bits)) + goto next; + /* * | ---- desired range ---- | * | state | or @@ -565,20 +574,15 @@ hit_next: goto out; } - if (state->end < end && prealloc && !need_resched()) - next_node = rb_next(&state->rb_node); - else - next_node = NULL; - set |= clear_state_bit(tree, state, &bits, wake); +next: if (last_end == (u64)-1) goto out; start = last_end + 1; if (start <= end && next_node) { state = rb_entry(next_node, struct extent_state, rb_node); - if (state->start == start) - goto hit_next; + goto hit_next; } goto search_again; @@ -961,8 +965,6 @@ hit_next: set_state_bits(tree, state, &bits); clear_state_bit(tree, state, &clear_bits, 0); - - merge_state(tree, state); if (last_end == (u64)-1) goto out; @@ -1007,7 +1009,6 @@ hit_next: if (state->end <= end) { set_state_bits(tree, state, &bits); clear_state_bit(tree, state, &clear_bits, 0); - merge_state(tree, state); if (last_end == (u64)-1) goto out; start = last_end + 1; @@ -1068,8 +1069,6 @@ hit_next: set_state_bits(tree, prealloc, &bits); clear_state_bit(tree, prealloc, &clear_bits, 0); - - merge_state(tree, prealloc); prealloc = NULL; goto out; } @@ -2154,13 +2153,46 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page, "this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode, failrec->this_mirror, num_copies, failrec->in_validation); - tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror, - failrec->bio_flags, 0); - return 0; + ret = tree->ops->submit_bio_hook(inode, read_mode, bio, + failrec->this_mirror, + failrec->bio_flags, 0); + return ret; } /* lots and lots of room for performance fixes in the end_bio funcs */ +int end_extent_writepage(struct page *page, int err, u64 start, u64 end) +{ + int uptodate = (err == 0); + struct extent_io_tree *tree; + int ret; + + tree = &BTRFS_I(page->mapping->host)->io_tree; + + if (tree->ops && tree->ops->writepage_end_io_hook) { + ret = tree->ops->writepage_end_io_hook(page, start, + end, NULL, uptodate); + if (ret) + uptodate = 0; + } + + if (!uptodate && tree->ops && + tree->ops->writepage_io_failed_hook) { + ret = tree->ops->writepage_io_failed_hook(NULL, page, + start, end, NULL); + /* Writeback already completed */ + if (ret == 0) + return 1; + } + + if (!uptodate) { + clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS); + ClearPageUptodate(page); + SetPageError(page); + } + return 0; +} + /* * after a writepage IO is done, we need to: * clear the uptodate bits on error @@ -2172,13 +2204,11 @@ static int bio_readpage_error(struct bio *failed_bio, struct page *page, */ static void end_bio_extent_writepage(struct bio *bio, int err) { - int uptodate = err == 0; struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1; struct extent_io_tree *tree; u64 start; u64 end; int whole_page; - int ret; do { struct page *page = bvec->bv_page; @@ -2195,28 +2225,9 @@ static void end_bio_extent_writepage(struct bio *bio, int err) if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); - if (tree->ops && tree->ops->writepage_end_io_hook) { - ret = tree->ops->writepage_end_io_hook(page, start, - end, NULL, uptodate); - if (ret) - uptodate = 0; - } - - if (!uptodate && tree->ops && - tree->ops->writepage_io_failed_hook) { - ret = tree->ops->writepage_io_failed_hook(bio, page, - start, end, NULL); - if (ret == 0) { - uptodate = (err == 0); - continue; - } - } - if (!uptodate) { - clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS); - ClearPageUptodate(page); - SetPageError(page); - } + if (end_extent_writepage(page, err, start, end)) + continue; if (whole_page) end_page_writeback(page); @@ -2779,9 +2790,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, delalloc_start = delalloc_end + 1; continue; } - tree->ops->fill_delalloc(inode, page, delalloc_start, - delalloc_end, &page_started, - &nr_written); + ret = tree->ops->fill_delalloc(inode, page, + delalloc_start, + delalloc_end, + &page_started, + &nr_written); + BUG_ON(ret); /* * delalloc_end is already one less than the total * length, so we don't subtract one from @@ -2818,8 +2832,12 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, if (tree->ops && tree->ops->writepage_start_hook) { ret = tree->ops->writepage_start_hook(page, start, page_end); - if (ret == -EAGAIN) { - redirty_page_for_writepage(wbc, page); + if (ret) { + /* Fixup worker will requeue */ + if (ret == -EBUSY) + wbc->pages_skipped++; + else + redirty_page_for_writepage(wbc, page); update_nr_written(page, wbc, nr_written); unlock_page(page); ret = 0; @@ -3289,7 +3307,7 @@ int try_release_extent_mapping(struct extent_map_tree *map, len = end - start + 1; write_lock(&map->lock); em = lookup_extent_mapping(map, start, len); - if (IS_ERR_OR_NULL(em)) { + if (!em) { write_unlock(&map->lock); break; } @@ -3853,10 +3871,9 @@ int clear_extent_buffer_uptodate(struct extent_io_tree *tree, num_pages = num_extent_pages(eb->start, eb->len); clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags); - if (eb_straddles_pages(eb)) { - clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1, - cached_state, GFP_NOFS); - } + clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1, + cached_state, GFP_NOFS); + for (i = 0; i < num_pages; i++) { page = extent_buffer_page(eb, i); if (page) diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index bc6a042cb6f..cecc3518c12 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -319,4 +319,5 @@ struct btrfs_mapping_tree; int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start, u64 length, u64 logical, struct page *page, int mirror_num); +int end_extent_writepage(struct page *page, int err, u64 start, u64 end); #endif diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 33a7890b1f4..1195f09761f 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -26,8 +26,8 @@ struct extent_map { unsigned long flags; struct block_device *bdev; atomic_t refs; - unsigned int in_tree:1; - unsigned int compress_type:4; + unsigned int in_tree; + unsigned int compress_type; }; struct extent_map_tree { diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 859ba2dd889..e8d06b6b919 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1605,6 +1605,14 @@ static long btrfs_fallocate(struct file *file, int mode, return -EOPNOTSUPP; /* + * Make sure we have enough space before we do the + * allocation. + */ + ret = btrfs_check_data_free_space(inode, len); + if (ret) + return ret; + + /* * wait for ordered IO before we have any locks. We'll loop again * below with the locks held. */ @@ -1667,27 +1675,12 @@ static long btrfs_fallocate(struct file *file, int mode, if (em->block_start == EXTENT_MAP_HOLE || (cur_offset >= inode->i_size && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) { - - /* - * Make sure we have enough space before we do the - * allocation. - */ - ret = btrfs_check_data_free_space(inode, last_byte - - cur_offset); - if (ret) { - free_extent_map(em); - break; - } - ret = btrfs_prealloc_file_range(inode, mode, cur_offset, last_byte - cur_offset, 1 << inode->i_blkbits, offset + len, &alloc_hint); - /* Let go of our reservation. */ - btrfs_free_reserved_data_space(inode, last_byte - - cur_offset); if (ret < 0) { free_extent_map(em); break; @@ -1715,6 +1708,8 @@ static long btrfs_fallocate(struct file *file, int mode, &cached_state, GFP_NOFS); out: mutex_unlock(&inode->i_mutex); + /* Let go of our reservation. */ + btrfs_free_reserved_data_space(inode, len); return ret; } @@ -1761,7 +1756,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) start - root->sectorsize, root->sectorsize, 0); if (IS_ERR(em)) { - ret = -ENXIO; + ret = PTR_ERR(em); goto out; } last_end = em->start + em->len; @@ -1773,7 +1768,7 @@ static int find_desired_extent(struct inode *inode, loff_t *offset, int origin) while (1) { em = btrfs_get_extent_fiemap(inode, NULL, 0, start, len, 0); if (IS_ERR(em)) { - ret = -ENXIO; + ret = PTR_ERR(em); break; } diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index c2f20594c9f..710ea380c7e 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -777,6 +777,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, spin_lock(&block_group->lock); if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) { spin_unlock(&block_group->lock); + btrfs_free_path(path); goto out; } spin_unlock(&block_group->lock); diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 213ffa86ce1..ee15d88b33d 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -438,7 +438,8 @@ int btrfs_save_ino_cache(struct btrfs_root *root, trans->bytes_reserved); if (ret) goto out; - trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans, + trace_btrfs_space_reservation(root->fs_info, "ino_cache", + (u64)(unsigned long)trans, trans->bytes_reserved, 1); again: inode = lookup_free_ino_inode(root, path); @@ -500,7 +501,8 @@ again: out_put: iput(inode); out_release: - trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans, + trace_btrfs_space_reservation(root->fs_info, "ino_cache", + (u64)(unsigned long)trans, trans->bytes_reserved, 0); btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved); out: diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 32214fe0f7e..892b34785cc 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1555,6 +1555,7 @@ static void btrfs_writepage_fixup_worker(struct btrfs_work *work) struct inode *inode; u64 page_start; u64 page_end; + int ret; fixup = container_of(work, struct btrfs_writepage_fixup, work); page = fixup->page; @@ -1582,12 +1583,21 @@ again: page_end, &cached_state, GFP_NOFS); unlock_page(page); btrfs_start_ordered_extent(inode, ordered, 1); + btrfs_put_ordered_extent(ordered); goto again; } - BUG(); + ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); + if (ret) { + mapping_set_error(page->mapping, ret); + end_extent_writepage(page, ret, page_start, page_end); + ClearPageChecked(page); + goto out; + } + btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state); ClearPageChecked(page); + set_page_dirty(page); out: unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end, &cached_state, GFP_NOFS); @@ -1630,7 +1640,7 @@ static int btrfs_writepage_start_hook(struct page *page, u64 start, u64 end) fixup->work.func = btrfs_writepage_fixup_worker; fixup->page = page; btrfs_queue_worker(&root->fs_info->fixup_workers, &fixup->work); - return -EAGAIN; + return -EBUSY; } static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, @@ -4575,7 +4585,8 @@ int btrfs_add_link(struct btrfs_trans_handle *trans, ret = btrfs_insert_dir_item(trans, root, name, name_len, parent_inode, &key, btrfs_inode_type(inode), index); - BUG_ON(ret); + if (ret) + goto fail_dir_item; btrfs_i_size_write(parent_inode, parent_inode->i_size + name_len * 2); @@ -4583,6 +4594,23 @@ int btrfs_add_link(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, root, parent_inode); } return ret; + +fail_dir_item: + if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { + u64 local_index; + int err; + err = btrfs_del_root_ref(trans, root->fs_info->tree_root, + key.objectid, root->root_key.objectid, + parent_ino, &local_index, name, name_len); + + } else if (add_backref) { + u64 local_index; + int err; + + err = btrfs_del_inode_ref(trans, root, name, name_len, + ino, parent_ino, &local_index); + } + return ret; } static int btrfs_add_nondir(struct btrfs_trans_handle *trans, @@ -6696,8 +6724,10 @@ int btrfs_create_subvol_root(struct btrfs_trans_handle *trans, int err; u64 index = 0; - inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid, - new_dirid, S_IFDIR | 0700, &index); + inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, + new_dirid, new_dirid, + S_IFDIR | (~current_umask() & S_IRWXUGO), + &index); if (IS_ERR(inode)) return PTR_ERR(inode); inode->i_op = &btrfs_dir_inode_operations; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 03bb62a9ee2..d8b54715c2d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -861,6 +861,7 @@ static int cluster_pages_for_defrag(struct inode *inode, int i_done; struct btrfs_ordered_extent *ordered; struct extent_state *cached_state = NULL; + struct extent_io_tree *tree; gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping); if (isize == 0) @@ -871,18 +872,34 @@ static int cluster_pages_for_defrag(struct inode *inode, num_pages << PAGE_CACHE_SHIFT); if (ret) return ret; -again: - ret = 0; i_done = 0; + tree = &BTRFS_I(inode)->io_tree; /* step one, lock all the pages */ for (i = 0; i < num_pages; i++) { struct page *page; +again: page = find_or_create_page(inode->i_mapping, - start_index + i, mask); + start_index + i, mask); if (!page) break; + page_start = page_offset(page); + page_end = page_start + PAGE_CACHE_SIZE - 1; + while (1) { + lock_extent(tree, page_start, page_end, GFP_NOFS); + ordered = btrfs_lookup_ordered_extent(inode, + page_start); + unlock_extent(tree, page_start, page_end, GFP_NOFS); + if (!ordered) + break; + + unlock_page(page); + btrfs_start_ordered_extent(inode, ordered, 1); + btrfs_put_ordered_extent(ordered); + lock_page(page); + } + if (!PageUptodate(page)) { btrfs_readpage(NULL, page); lock_page(page); @@ -893,15 +910,22 @@ again: break; } } + isize = i_size_read(inode); file_end = (isize - 1) >> PAGE_CACHE_SHIFT; - if (!isize || page->index > file_end || - page->mapping != inode->i_mapping) { + if (!isize || page->index > file_end) { /* whoops, we blew past eof, skip this page */ unlock_page(page); page_cache_release(page); break; } + + if (page->mapping != inode->i_mapping) { + unlock_page(page); + page_cache_release(page); + goto again; + } + pages[i] = page; i_done++; } @@ -924,25 +948,6 @@ again: lock_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end - 1, 0, &cached_state, GFP_NOFS); - ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1); - if (ordered && - ordered->file_offset + ordered->len > page_start && - ordered->file_offset < page_end) { - btrfs_put_ordered_extent(ordered); - unlock_extent_cached(&BTRFS_I(inode)->io_tree, - page_start, page_end - 1, - &cached_state, GFP_NOFS); - for (i = 0; i < i_done; i++) { - unlock_page(pages[i]); - page_cache_release(pages[i]); - } - btrfs_wait_ordered_range(inode, page_start, - page_end - page_start); - goto again; - } - if (ordered) - btrfs_put_ordered_extent(ordered); - clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start, page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING, 0, 0, &cached_state, @@ -1327,6 +1332,12 @@ static noinline int btrfs_ioctl_snap_create_transid(struct file *file, goto out; } + if (name[0] == '.' && + (namelen == 1 || (name[1] == '.' && namelen == 2))) { + ret = -EEXIST; + goto out; + } + if (subvol) { ret = btrfs_mksubvol(&file->f_path, name, namelen, NULL, transid, readonly); diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 9770cc5bfb7..abc0fbffa51 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1367,7 +1367,8 @@ out: } static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev, - u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length) + u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length, + u64 dev_offset) { struct btrfs_mapping_tree *map_tree = &sdev->dev->dev_root->fs_info->mapping_tree; @@ -1391,7 +1392,8 @@ static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev, goto out; for (i = 0; i < map->num_stripes; ++i) { - if (map->stripes[i].dev == sdev->dev) { + if (map->stripes[i].dev == sdev->dev && + map->stripes[i].physical == dev_offset) { ret = scrub_stripe(sdev, map, i, chunk_offset, length); if (ret) goto out; @@ -1487,7 +1489,7 @@ int scrub_enumerate_chunks(struct scrub_dev *sdev, u64 start, u64 end) break; } ret = scrub_chunk(sdev, chunk_tree, chunk_objectid, - chunk_offset, length); + chunk_offset, length, found_key.offset); btrfs_put_block_group(cache); if (ret) break; diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 287a6728b1a..04b77e3ceb7 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -327,7 +327,8 @@ again: if (num_bytes) { trace_btrfs_space_reservation(root->fs_info, "transaction", - (u64)h, num_bytes, 1); + (u64)(unsigned long)h, + num_bytes, 1); h->block_rsv = &root->fs_info->trans_block_rsv; h->bytes_reserved = num_bytes; } @@ -915,7 +916,11 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, dentry->d_name.name, dentry->d_name.len, parent_inode, &key, BTRFS_FT_DIR, index); - BUG_ON(ret); + if (ret) { + pending->error = -EEXIST; + dput(parent); + goto fail; + } btrfs_i_size_write(parent_inode, parent_inode->i_size + dentry->d_name.len * 2); @@ -993,12 +998,9 @@ static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans, { struct btrfs_pending_snapshot *pending; struct list_head *head = &trans->transaction->pending_snapshots; - int ret; - list_for_each_entry(pending, head, list) { - ret = create_pending_snapshot(trans, fs_info, pending); - BUG_ON(ret); - } + list_for_each_entry(pending, head, list) + create_pending_snapshot(trans, fs_info, pending); return 0; } diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0b4e2af7954..ef41f285a47 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -459,12 +459,23 @@ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices) { struct btrfs_device *device, *next; + struct block_device *latest_bdev = NULL; + u64 latest_devid = 0; + u64 latest_transid = 0; + mutex_lock(&uuid_mutex); again: /* This is the initialized path, it is safe to release the devices. */ list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) { - if (device->in_fs_metadata) + if (device->in_fs_metadata) { + if (!latest_transid || + device->generation > latest_transid) { + latest_devid = device->devid; + latest_transid = device->generation; + latest_bdev = device->bdev; + } continue; + } if (device->bdev) { blkdev_put(device->bdev, device->mode); @@ -487,6 +498,10 @@ again: goto again; } + fs_devices->latest_bdev = latest_bdev; + fs_devices->latest_devid = latest_devid; + fs_devices->latest_trans = latest_transid; + mutex_unlock(&uuid_mutex); return 0; } @@ -1953,7 +1968,7 @@ static int btrfs_relocate_chunk(struct btrfs_root *root, em = lookup_extent_mapping(em_tree, chunk_offset, 1); read_unlock(&em_tree->lock); - BUG_ON(em->start > chunk_offset || + BUG_ON(!em || em->start > chunk_offset || em->start + em->len < chunk_offset); map = (struct map_lookup *)em->bdev; @@ -4356,6 +4371,20 @@ int btrfs_read_sys_array(struct btrfs_root *root) return -ENOMEM; btrfs_set_buffer_uptodate(sb); btrfs_set_buffer_lockdep_class(root->root_key.objectid, sb, 0); + /* + * The sb extent buffer is artifical and just used to read the system array. + * btrfs_set_buffer_uptodate() call does not properly mark all it's + * pages up-to-date when the page is larger: extent does not cover the + * whole page and consequently check_page_uptodate does not find all + * the page's extents up-to-date (the hole beyond sb), + * write_extent_buffer then triggers a WARN_ON. + * + * Regular short extents go through mark_extent_buffer_dirty/writeback cycle, + * but sb spans only this function. Add an explicit SetPageUptodate call + * to silence the warning eg. on PowerPC 64. + */ + if (PAGE_CACHE_SIZE > BTRFS_SUPER_INFO_SIZE) + SetPageUptodate(sb->first_page); write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE); array_size = btrfs_super_sys_array_size(super_copy); diff --git a/fs/compat.c b/fs/compat.c index fa9d721ecfe..07880bae28a 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -131,41 +131,35 @@ asmlinkage long compat_sys_utimes(const char __user *filename, struct compat_tim static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf) { - compat_ino_t ino = stat->ino; - typeof(ubuf->st_uid) uid = 0; - typeof(ubuf->st_gid) gid = 0; - int err; + struct compat_stat tmp; - SET_UID(uid, stat->uid); - SET_GID(gid, stat->gid); + if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev)) + return -EOVERFLOW; - if ((u64) stat->size > MAX_NON_LFS || - !old_valid_dev(stat->dev) || - !old_valid_dev(stat->rdev)) + memset(&tmp, 0, sizeof(tmp)); + tmp.st_dev = old_encode_dev(stat->dev); + tmp.st_ino = stat->ino; + if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino) return -EOVERFLOW; - if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino) + tmp.st_mode = stat->mode; + tmp.st_nlink = stat->nlink; + if (tmp.st_nlink != stat->nlink) return -EOVERFLOW; - - if (clear_user(ubuf, sizeof(*ubuf))) - return -EFAULT; - - err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev); - err |= __put_user(ino, &ubuf->st_ino); - err |= __put_user(stat->mode, &ubuf->st_mode); - err |= __put_user(stat->nlink, &ubuf->st_nlink); - err |= __put_user(uid, &ubuf->st_uid); - err |= __put_user(gid, &ubuf->st_gid); - err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev); - err |= __put_user(stat->size, &ubuf->st_size); - err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime); - err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec); - err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime); - err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec); - err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime); - err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec); - err |= __put_user(stat->blksize, &ubuf->st_blksize); - err |= __put_user(stat->blocks, &ubuf->st_blocks); - return err; + SET_UID(tmp.st_uid, stat->uid); + SET_GID(tmp.st_gid, stat->gid); + tmp.st_rdev = old_encode_dev(stat->rdev); + if ((u64) stat->size > MAX_NON_LFS) + return -EOVERFLOW; + tmp.st_size = stat->size; + tmp.st_atime = stat->atime.tv_sec; + tmp.st_atime_nsec = stat->atime.tv_nsec; + tmp.st_mtime = stat->mtime.tv_sec; + tmp.st_mtime_nsec = stat->mtime.tv_nsec; + tmp.st_ctime = stat->ctime.tv_sec; + tmp.st_ctime_nsec = stat->ctime.tv_nsec; + tmp.st_blocks = stat->blocks; + tmp.st_blksize = stat->blksize; + return copy_to_user(ubuf, &tmp, sizeof(tmp)) ? -EFAULT : 0; } asmlinkage long compat_sys_newstat(const char __user * filename, diff --git a/fs/dcache.c b/fs/dcache.c index 16a53cc2cc0..138be96e25b 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -104,7 +104,7 @@ static unsigned int d_hash_shift __read_mostly; static struct hlist_bl_head *dentry_hashtable __read_mostly; -static inline struct hlist_bl_head *d_hash(struct dentry *parent, +static inline struct hlist_bl_head *d_hash(const struct dentry *parent, unsigned long hash) { hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES; @@ -1717,8 +1717,9 @@ EXPORT_SYMBOL(d_add_ci); * child is looked up. Thus, an interlocking stepping of sequence lock checks * is formed, giving integrity down the path walk. */ -struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, - unsigned *seq, struct inode **inode) +struct dentry *__d_lookup_rcu(const struct dentry *parent, + const struct qstr *name, + unsigned *seqp, struct inode **inode) { unsigned int len = name->len; unsigned int hash = name->hash; @@ -1748,6 +1749,7 @@ struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, * See Documentation/filesystems/path-lookup.txt for more details. */ hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) { + unsigned seq; struct inode *i; const char *tname; int tlen; @@ -1756,7 +1758,7 @@ struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, continue; seqretry: - *seq = read_seqcount_begin(&dentry->d_seq); + seq = read_seqcount_begin(&dentry->d_seq); if (dentry->d_parent != parent) continue; if (d_unhashed(dentry)) @@ -1771,7 +1773,7 @@ seqretry: * edge of memory when walking. If we could load this * atomically some other way, we could drop this check. */ - if (read_seqcount_retry(&dentry->d_seq, *seq)) + if (read_seqcount_retry(&dentry->d_seq, seq)) goto seqretry; if (unlikely(parent->d_flags & DCACHE_OP_COMPARE)) { if (parent->d_op->d_compare(parent, *inode, @@ -1788,6 +1790,7 @@ seqretry: * order to do anything useful with the returned dentry * anyway. */ + *seqp = seq; *inode = i; return dentry; } @@ -2968,7 +2971,7 @@ __setup("dhash_entries=", set_dhash_entries); static void __init dcache_init_early(void) { - int loop; + unsigned int loop; /* If hashes are distributed across NUMA nodes, defer * hash allocation until vmalloc space is available. @@ -2986,13 +2989,13 @@ static void __init dcache_init_early(void) &d_hash_mask, 0); - for (loop = 0; loop < (1 << d_hash_shift); loop++) + for (loop = 0; loop < (1U << d_hash_shift); loop++) INIT_HLIST_BL_HEAD(dentry_hashtable + loop); } static void __init dcache_init(void) { - int loop; + unsigned int loop; /* * A constructor could be added for stable state like the lists, @@ -3016,7 +3019,7 @@ static void __init dcache_init(void) &d_hash_mask, 0); - for (loop = 0; loop < (1 << d_hash_shift); loop++) + for (loop = 0; loop < (1U << d_hash_shift); loop++) INIT_HLIST_BL_HEAD(dentry_hashtable + loop); } diff --git a/fs/direct-io.c b/fs/direct-io.c index 4a588dbd11b..f4aadd15b61 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -173,7 +173,7 @@ void inode_dio_wait(struct inode *inode) if (atomic_read(&inode->i_dio_count)) __inode_dio_wait(inode); } -EXPORT_SYMBOL_GPL(inode_dio_wait); +EXPORT_SYMBOL(inode_dio_wait); /* * inode_dio_done - signal finish of a direct I/O requests @@ -187,7 +187,7 @@ void inode_dio_done(struct inode *inode) if (atomic_dec_and_test(&inode->i_dio_count)) wake_up_bit(&inode->i_state, __I_DIO_WAKEUP); } -EXPORT_SYMBOL_GPL(inode_dio_done); +EXPORT_SYMBOL(inode_dio_done); /* * How many pages are in the queue? diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index 349209dc6a9..3a06f4043df 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -429,7 +429,7 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf, goto memdup; } else if (count < MIN_MSG_PKT_SIZE || count > MAX_MSG_PKT_SIZE) { printk(KERN_WARNING "%s: Acceptable packet size range is " - "[%d-%lu], but amount of data written is [%zu].", + "[%d-%zu], but amount of data written is [%zu].", __func__, MIN_MSG_PKT_SIZE, MAX_MSG_PKT_SIZE, count); return -EINVAL; } diff --git a/fs/eventpoll.c b/fs/eventpoll.c index aabdfc38cf2..ea54cdef04d 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -320,6 +320,11 @@ static inline int ep_is_linked(struct list_head *p) return !list_empty(p); } +static inline struct eppoll_entry *ep_pwq_from_wait(wait_queue_t *p) +{ + return container_of(p, struct eppoll_entry, wait); +} + /* Get the "struct epitem" from a wait queue pointer */ static inline struct epitem *ep_item_from_wait(wait_queue_t *p) { @@ -467,6 +472,18 @@ static void ep_poll_safewake(wait_queue_head_t *wq) put_cpu(); } +static void ep_remove_wait_queue(struct eppoll_entry *pwq) +{ + wait_queue_head_t *whead; + + rcu_read_lock(); + /* If it is cleared by POLLFREE, it should be rcu-safe */ + whead = rcu_dereference(pwq->whead); + if (whead) + remove_wait_queue(whead, &pwq->wait); + rcu_read_unlock(); +} + /* * This function unregisters poll callbacks from the associated file * descriptor. Must be called with "mtx" held (or "epmutex" if called from @@ -481,7 +498,7 @@ static void ep_unregister_pollwait(struct eventpoll *ep, struct epitem *epi) pwq = list_first_entry(lsthead, struct eppoll_entry, llink); list_del(&pwq->llink); - remove_wait_queue(pwq->whead, &pwq->wait); + ep_remove_wait_queue(pwq); kmem_cache_free(pwq_cache, pwq); } } @@ -842,6 +859,17 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k struct epitem *epi = ep_item_from_wait(wait); struct eventpoll *ep = epi->ep; + if ((unsigned long)key & POLLFREE) { + ep_pwq_from_wait(wait)->whead = NULL; + /* + * whead = NULL above can race with ep_remove_wait_queue() + * which can do another remove_wait_queue() after us, so we + * can't use __remove_wait_queue(). whead->lock is held by + * the caller. + */ + list_del_init(&wait->task_list); + } + spin_lock_irqsave(&ep->lock, flags); /* diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 376816fcd04..351a3e79778 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -167,14 +167,19 @@ void gfs2_glock_add_to_lru(struct gfs2_glock *gl) spin_unlock(&lru_lock); } -static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl) +static void __gfs2_glock_remove_from_lru(struct gfs2_glock *gl) { - spin_lock(&lru_lock); if (!list_empty(&gl->gl_lru)) { list_del_init(&gl->gl_lru); atomic_dec(&lru_count); clear_bit(GLF_LRU, &gl->gl_flags); } +} + +static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl) +{ + spin_lock(&lru_lock); + __gfs2_glock_remove_from_lru(gl); spin_unlock(&lru_lock); } @@ -217,11 +222,12 @@ void gfs2_glock_put(struct gfs2_glock *gl) struct gfs2_sbd *sdp = gl->gl_sbd; struct address_space *mapping = gfs2_glock2aspace(gl); - if (atomic_dec_and_test(&gl->gl_ref)) { + if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) { + __gfs2_glock_remove_from_lru(gl); + spin_unlock(&lru_lock); spin_lock_bucket(gl->gl_hash); hlist_bl_del_rcu(&gl->gl_list); spin_unlock_bucket(gl->gl_hash); - gfs2_glock_remove_from_lru(gl); GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders)); GLOCK_BUG_ON(gl, mapping && mapping->nrpages); trace_gfs2_glock_put(gl); diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index a7d611b93f0..56987460cda 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -391,10 +391,6 @@ static int alloc_dinode(struct gfs2_inode *dip, u64 *no_addr, u64 *generation) int error; int dblocks = 1; - error = gfs2_rindex_update(sdp); - if (error) - fs_warn(sdp, "rindex update returns %d\n", error); - error = gfs2_inplace_reserve(dip, RES_DINODE); if (error) goto out; @@ -1043,6 +1039,7 @@ static int gfs2_unlink(struct inode *dir, struct dentry *dentry) rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr); if (!rgd) goto out_inodes; + gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2); diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 6aacf3f230a..24f609c9ef9 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -800,6 +800,11 @@ static int init_inodes(struct gfs2_sbd *sdp, int undo) fs_err(sdp, "can't get quota file inode: %d\n", error); goto fail_rindex; } + + error = gfs2_rindex_update(sdp); + if (error) + goto fail_qinode; + return 0; fail_qinode: diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 981bfa32121..49ada95209d 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -683,16 +683,21 @@ int gfs2_rindex_update(struct gfs2_sbd *sdp) struct gfs2_glock *gl = ip->i_gl; struct gfs2_holder ri_gh; int error = 0; + int unlock_required = 0; /* Read new copy from disk if we don't have the latest */ if (!sdp->sd_rindex_uptodate) { mutex_lock(&sdp->sd_rindex_mutex); - error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh); - if (error) - return error; + if (!gfs2_glock_is_locked_by_me(gl)) { + error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh); + if (error) + return error; + unlock_required = 1; + } if (!sdp->sd_rindex_uptodate) error = gfs2_ri_update(ip); - gfs2_glock_dq_uninit(&ri_gh); + if (unlock_required) + gfs2_glock_dq_uninit(&ri_gh); mutex_unlock(&sdp->sd_rindex_mutex); } diff --git a/fs/inode.c b/fs/inode.c index fb10d86ffad..d3ebdbe723d 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1651,7 +1651,7 @@ __setup("ihash_entries=", set_ihash_entries); */ void __init inode_init_early(void) { - int loop; + unsigned int loop; /* If hashes are distributed across NUMA nodes, defer * hash allocation until vmalloc space is available. @@ -1669,13 +1669,13 @@ void __init inode_init_early(void) &i_hash_mask, 0); - for (loop = 0; loop < (1 << i_hash_shift); loop++) + for (loop = 0; loop < (1U << i_hash_shift); loop++) INIT_HLIST_HEAD(&inode_hashtable[loop]); } void __init inode_init(void) { - int loop; + unsigned int loop; /* inode slab cache */ inode_cachep = kmem_cache_create("inode_cache", @@ -1699,7 +1699,7 @@ void __init inode_init(void) &i_hash_mask, 0); - for (loop = 0; loop < (1 << i_hash_shift); loop++) + for (loop = 0; loop < (1U << i_hash_shift); loop++) INIT_HLIST_HEAD(&inode_hashtable[loop]); } diff --git a/fs/namei.c b/fs/namei.c index 208c6aa4a98..e2ba62820a0 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1095,8 +1095,10 @@ static struct dentry *d_inode_lookup(struct dentry *parent, struct dentry *dentr struct dentry *old; /* Don't create child dentry for a dead directory. */ - if (unlikely(IS_DEADDIR(inode))) + if (unlikely(IS_DEADDIR(inode))) { + dput(dentry); return ERR_PTR(-ENOENT); + } old = inode->i_op->lookup(inode, dentry, nd); if (unlikely(old)) { @@ -1372,6 +1374,34 @@ static inline int can_lookup(struct inode *inode) return 1; } +unsigned int full_name_hash(const unsigned char *name, unsigned int len) +{ + unsigned long hash = init_name_hash(); + while (len--) + hash = partial_name_hash(*name++, hash); + return end_name_hash(hash); +} +EXPORT_SYMBOL(full_name_hash); + +/* + * We know there's a real path component here of at least + * one character. + */ +static inline unsigned long hash_name(const char *name, unsigned int *hashp) +{ + unsigned long hash = init_name_hash(); + unsigned long len = 0, c; + + c = (unsigned char)*name; + do { + len++; + hash = partial_name_hash(c, hash); + c = (unsigned char)name[len]; + } while (c && c != '/'); + *hashp = end_name_hash(hash); + return len; +} + /* * Name resolution. * This is the basic name resolution function, turning a pathname into @@ -1392,31 +1422,22 @@ static int link_path_walk(const char *name, struct nameidata *nd) /* At this point we know we have a real path component. */ for(;;) { - unsigned long hash; struct qstr this; - unsigned int c; + long len; int type; err = may_lookup(nd); if (err) break; + len = hash_name(name, &this.hash); this.name = name; - c = *(const unsigned char *)name; - - hash = init_name_hash(); - do { - name++; - hash = partial_name_hash(c, hash); - c = *(const unsigned char *)name; - } while (c && (c != '/')); - this.len = name - (const char *) this.name; - this.hash = end_name_hash(hash); + this.len = len; type = LAST_NORM; - if (this.name[0] == '.') switch (this.len) { + if (name[0] == '.') switch (len) { case 2: - if (this.name[1] == '.') { + if (name[1] == '.') { type = LAST_DOTDOT; nd->flags |= LOOKUP_JUMPED; } @@ -1435,12 +1456,18 @@ static int link_path_walk(const char *name, struct nameidata *nd) } } - /* remove trailing slashes? */ - if (!c) + if (!name[len]) goto last_component; - while (*++name == '/'); - if (!*name) + /* + * If it wasn't NUL, we know it was '/'. Skip that + * slash, and continue until no more slashes. + */ + do { + len++; + } while (unlikely(name[len] == '/')); + if (!name[len]) goto last_component; + name += len; err = walk_component(nd, &next, &this, type, LOOKUP_FOLLOW); if (err < 0) @@ -1773,24 +1800,21 @@ static struct dentry *lookup_hash(struct nameidata *nd) struct dentry *lookup_one_len(const char *name, struct dentry *base, int len) { struct qstr this; - unsigned long hash; unsigned int c; WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex)); this.name = name; this.len = len; + this.hash = full_name_hash(name, len); if (!len) return ERR_PTR(-EACCES); - hash = init_name_hash(); while (len--) { c = *(const unsigned char *)name++; if (c == '/' || c == '\0') return ERR_PTR(-EACCES); - hash = partial_name_hash(c, hash); } - this.hash = end_name_hash(hash); /* * See if the low-level filesystem might want * to use its own hash.. diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f0c849c98fe..ec9f6ef6c5d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3575,8 +3575,8 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu } if (npages > 1) { /* for decoding across pages */ - args.acl_scratch = alloc_page(GFP_KERNEL); - if (!args.acl_scratch) + res.acl_scratch = alloc_page(GFP_KERNEL); + if (!res.acl_scratch) goto out_free; } args.acl_len = npages * PAGE_SIZE; @@ -3612,8 +3612,8 @@ out_free: for (i = 0; i < npages; i++) if (pages[i]) __free_page(pages[i]); - if (args.acl_scratch) - __free_page(args.acl_scratch); + if (res.acl_scratch) + __free_page(res.acl_scratch); return ret; } @@ -4883,8 +4883,10 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) clp->cl_rpcclient->cl_auth->au_flavor); res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL); - if (unlikely(!res.server_scope)) - return -ENOMEM; + if (unlikely(!res.server_scope)) { + status = -ENOMEM; + goto out; + } status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (!status) @@ -4901,12 +4903,13 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) clp->server_scope = NULL; } - if (!clp->server_scope) + if (!clp->server_scope) { clp->server_scope = res.server_scope; - else - kfree(res.server_scope); + goto out; + } } - + kfree(res.server_scope); +out: dprintk("<-- %s status= %d\n", __func__, status); return status; } @@ -5008,37 +5011,53 @@ int nfs4_proc_get_lease_time(struct nfs_client *clp, struct nfs_fsinfo *fsinfo) return status; } +static struct nfs4_slot *nfs4_alloc_slots(u32 max_slots, gfp_t gfp_flags) +{ + return kcalloc(max_slots, sizeof(struct nfs4_slot), gfp_flags); +} + +static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl, + struct nfs4_slot *new, + u32 max_slots, + u32 ivalue) +{ + struct nfs4_slot *old = NULL; + u32 i; + + spin_lock(&tbl->slot_tbl_lock); + if (new) { + old = tbl->slots; + tbl->slots = new; + tbl->max_slots = max_slots; + } + tbl->highest_used_slotid = -1; /* no slot is currently used */ + for (i = 0; i < tbl->max_slots; i++) + tbl->slots[i].seq_nr = ivalue; + spin_unlock(&tbl->slot_tbl_lock); + kfree(old); +} + /* - * Reset a slot table + * (re)Initialise a slot table */ -static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs, - int ivalue) +static int nfs4_realloc_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs, + u32 ivalue) { struct nfs4_slot *new = NULL; - int i; - int ret = 0; + int ret = -ENOMEM; dprintk("--> %s: max_reqs=%u, tbl->max_slots %d\n", __func__, max_reqs, tbl->max_slots); /* Does the newly negotiated max_reqs match the existing slot table? */ if (max_reqs != tbl->max_slots) { - ret = -ENOMEM; - new = kmalloc(max_reqs * sizeof(struct nfs4_slot), - GFP_NOFS); + new = nfs4_alloc_slots(max_reqs, GFP_NOFS); if (!new) goto out; - ret = 0; - kfree(tbl->slots); } - spin_lock(&tbl->slot_tbl_lock); - if (new) { - tbl->slots = new; - tbl->max_slots = max_reqs; - } - for (i = 0; i < tbl->max_slots; ++i) - tbl->slots[i].seq_nr = ivalue; - spin_unlock(&tbl->slot_tbl_lock); + ret = 0; + + nfs4_add_and_init_slots(tbl, new, max_reqs, ivalue); dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__, tbl, tbl->slots, tbl->max_slots); out: @@ -5061,36 +5080,6 @@ static void nfs4_destroy_slot_tables(struct nfs4_session *session) } /* - * Initialize slot table - */ -static int nfs4_init_slot_table(struct nfs4_slot_table *tbl, - int max_slots, int ivalue) -{ - struct nfs4_slot *slot; - int ret = -ENOMEM; - - BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE); - - dprintk("--> %s: max_reqs=%u\n", __func__, max_slots); - - slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_NOFS); - if (!slot) - goto out; - ret = 0; - - spin_lock(&tbl->slot_tbl_lock); - tbl->max_slots = max_slots; - tbl->slots = slot; - tbl->highest_used_slotid = -1; /* no slot is currently used */ - spin_unlock(&tbl->slot_tbl_lock); - dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__, - tbl, tbl->slots, tbl->max_slots); -out: - dprintk("<-- %s: return %d\n", __func__, ret); - return ret; -} - -/* * Initialize or reset the forechannel and backchannel tables */ static int nfs4_setup_session_slot_tables(struct nfs4_session *ses) @@ -5101,25 +5090,16 @@ static int nfs4_setup_session_slot_tables(struct nfs4_session *ses) dprintk("--> %s\n", __func__); /* Fore channel */ tbl = &ses->fc_slot_table; - if (tbl->slots == NULL) { - status = nfs4_init_slot_table(tbl, ses->fc_attrs.max_reqs, 1); - if (status) /* -ENOMEM */ - return status; - } else { - status = nfs4_reset_slot_table(tbl, ses->fc_attrs.max_reqs, 1); - if (status) - return status; - } + status = nfs4_realloc_slot_table(tbl, ses->fc_attrs.max_reqs, 1); + if (status) /* -ENOMEM */ + return status; /* Back channel */ tbl = &ses->bc_slot_table; - if (tbl->slots == NULL) { - status = nfs4_init_slot_table(tbl, ses->bc_attrs.max_reqs, 0); - if (status) - /* Fore and back channel share a connection so get - * both slot tables or neither */ - nfs4_destroy_slot_tables(ses); - } else - status = nfs4_reset_slot_table(tbl, ses->bc_attrs.max_reqs, 0); + status = nfs4_realloc_slot_table(tbl, ses->bc_attrs.max_reqs, 0); + if (status && tbl->slots == NULL) + /* Fore and back channel share a connection so get + * both slot tables or neither */ + nfs4_destroy_slot_tables(ses); return status; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index a53f33b4ac3..45392032e7b 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1132,6 +1132,8 @@ void nfs4_schedule_stateid_recovery(const struct nfs_server *server, struct nfs4 { struct nfs_client *clp = server->nfs_client; + if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags)) + nfs_async_inode_return_delegation(state->inode, &state->stateid); nfs4_state_mark_reclaim_nograce(clp, state); nfs4_schedule_state_manager(clp); } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 95e92e43840..33bd8d0f745 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -2522,7 +2522,6 @@ static void nfs4_xdr_enc_getacl(struct rpc_rqst *req, struct xdr_stream *xdr, xdr_inline_pages(&req->rq_rcv_buf, replen << 2, args->acl_pages, args->acl_pgbase, args->acl_len); - xdr_set_scratch_buffer(xdr, page_address(args->acl_scratch), PAGE_SIZE); encode_nops(&hdr); } @@ -6032,6 +6031,10 @@ nfs4_xdr_dec_getacl(struct rpc_rqst *rqstp, struct xdr_stream *xdr, struct compound_hdr hdr; int status; + if (res->acl_scratch != NULL) { + void *p = page_address(res->acl_scratch); + xdr_set_scratch_buffer(xdr, p, PAGE_SIZE); + } status = decode_compound_hdr(xdr, &hdr); if (status) goto out; diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index f14fde2b03d..e0281992ddc 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -1,7 +1,7 @@ /** * attrib.c - NTFS attribute operations. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2007 Anton Altaparmakov + * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc. * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -345,10 +345,10 @@ LCN ntfs_attr_vcn_to_lcn_nolock(ntfs_inode *ni, const VCN vcn, unsigned long flags; bool is_retry = false; + BUG_ON(!ni); ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, %s_locked.", ni->mft_no, (unsigned long long)vcn, write_locked ? "write" : "read"); - BUG_ON(!ni); BUG_ON(!NInoNonResident(ni)); BUG_ON(vcn < 0); if (!ni->runlist.rl) { @@ -469,9 +469,9 @@ runlist_element *ntfs_attr_find_vcn_nolock(ntfs_inode *ni, const VCN vcn, int err = 0; bool is_retry = false; + BUG_ON(!ni); ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, with%s ctx.", ni->mft_no, (unsigned long long)vcn, ctx ? "" : "out"); - BUG_ON(!ni); BUG_ON(!NInoNonResident(ni)); BUG_ON(vcn < 0); if (!ni->runlist.rl) { diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 382857f9c7d..3014a36a255 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -1,7 +1,7 @@ /** * mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc. + * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc. * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -1367,7 +1367,7 @@ static int ntfs_mft_bitmap_extend_allocation_nolock(ntfs_volume *vol) ntfs_error(vol->sb, "Failed to merge runlists for mft " "bitmap."); if (ntfs_cluster_free_from_rl(vol, rl2)) { - ntfs_error(vol->sb, "Failed to dealocate " + ntfs_error(vol->sb, "Failed to deallocate " "allocated cluster.%s", es); NVolSetErrors(vol); } @@ -1805,7 +1805,7 @@ static int ntfs_mft_data_extend_allocation_nolock(ntfs_volume *vol) ntfs_error(vol->sb, "Failed to merge runlists for mft data " "attribute."); if (ntfs_cluster_free_from_rl(vol, rl2)) { - ntfs_error(vol->sb, "Failed to dealocate clusters " + ntfs_error(vol->sb, "Failed to deallocate clusters " "from the mft data attribute.%s", es); NVolSetErrors(vol); } diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index 5a4a8af5c40..f907611cca7 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -1,7 +1,7 @@ /* * super.c - NTFS kernel super block handling. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc. + * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc. * Copyright (c) 2001,2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -1239,7 +1239,6 @@ static int check_windows_hibernation_status(ntfs_volume *vol) { MFT_REF mref; struct inode *vi; - ntfs_inode *ni; struct page *page; u32 *kaddr, *kend; ntfs_name *name = NULL; @@ -1290,7 +1289,6 @@ static int check_windows_hibernation_status(ntfs_volume *vol) "is not the system volume.", i_size_read(vi)); goto iput_out; } - ni = NTFS_I(vi); page = ntfs_map_page(vi->i_mapping, 0); if (IS_ERR(page)) { ntfs_error(vol->sb, "Failed to read from hiberfil.sys."); diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index be244692550..a9856e3eaaf 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -1053,7 +1053,7 @@ static int ocfs2_rename(struct inode *old_dir, handle_t *handle = NULL; struct buffer_head *old_dir_bh = NULL; struct buffer_head *new_dir_bh = NULL; - nlink_t old_dir_nlink = old_dir->i_nlink; + u32 old_dir_nlink = old_dir->i_nlink; struct ocfs2_dinode *old_di; struct ocfs2_dir_lookup_result old_inode_dot_dot_res = { NULL, }; struct ocfs2_dir_lookup_result target_lookup_res = { NULL, }; diff --git a/fs/quota/quota.c b/fs/quota/quota.c index 7898cd688a0..fc2c4388d12 100644 --- a/fs/quota/quota.c +++ b/fs/quota/quota.c @@ -292,11 +292,26 @@ static int do_quotactl(struct super_block *sb, int type, int cmd, qid_t id, } } +/* Return 1 if 'cmd' will block on frozen filesystem */ +static int quotactl_cmd_write(int cmd) +{ + switch (cmd) { + case Q_GETFMT: + case Q_GETINFO: + case Q_SYNC: + case Q_XGETQSTAT: + case Q_XGETQUOTA: + case Q_XQUOTASYNC: + return 0; + } + return 1; +} + /* * look up a superblock on which quota ops will be performed * - use the name of a block device to find the superblock thereon */ -static struct super_block *quotactl_block(const char __user *special) +static struct super_block *quotactl_block(const char __user *special, int cmd) { #ifdef CONFIG_BLOCK struct block_device *bdev; @@ -309,7 +324,10 @@ static struct super_block *quotactl_block(const char __user *special) putname(tmp); if (IS_ERR(bdev)) return ERR_CAST(bdev); - sb = get_super(bdev); + if (quotactl_cmd_write(cmd)) + sb = get_super_thawed(bdev); + else + sb = get_super(bdev); bdput(bdev); if (!sb) return ERR_PTR(-ENODEV); @@ -361,7 +379,7 @@ SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special, pathp = &path; } - sb = quotactl_block(special); + sb = quotactl_block(special, cmds); if (IS_ERR(sb)) { ret = PTR_ERR(sb); goto out; diff --git a/fs/select.c b/fs/select.c index d33418fdc85..e782258d0de 100644 --- a/fs/select.c +++ b/fs/select.c @@ -912,7 +912,7 @@ static long do_restart_poll(struct restart_block *restart_block) } SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds, - long, timeout_msecs) + int, timeout_msecs) { struct timespec end_time, *to = NULL; int ret; diff --git a/fs/signalfd.c b/fs/signalfd.c index 492465b451d..7ae2a574cb2 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -30,6 +30,21 @@ #include <linux/signalfd.h> #include <linux/syscalls.h> +void signalfd_cleanup(struct sighand_struct *sighand) +{ + wait_queue_head_t *wqh = &sighand->signalfd_wqh; + /* + * The lockless check can race with remove_wait_queue() in progress, + * but in this case its caller should run under rcu_read_lock() and + * sighand_cachep is SLAB_DESTROY_BY_RCU, we can safely return. + */ + if (likely(!waitqueue_active(wqh))) + return; + + /* wait_queue_t->func(POLLFREE) should do remove_wait_queue() */ + wake_up_poll(wqh, POLLHUP | POLLFREE); +} + struct signalfd_ctx { sigset_t sigmask; }; diff --git a/fs/super.c b/fs/super.c index 6015c02296b..6277ec6cb60 100644 --- a/fs/super.c +++ b/fs/super.c @@ -634,6 +634,28 @@ rescan: EXPORT_SYMBOL(get_super); /** + * get_super_thawed - get thawed superblock of a device + * @bdev: device to get the superblock for + * + * Scans the superblock list and finds the superblock of the file system + * mounted on the device. The superblock is returned once it is thawed + * (or immediately if it was not frozen). %NULL is returned if no match + * is found. + */ +struct super_block *get_super_thawed(struct block_device *bdev) +{ + while (1) { + struct super_block *s = get_super(bdev); + if (!s || s->s_frozen == SB_UNFROZEN) + return s; + up_read(&s->s_umount); + vfs_check_frozen(s, SB_FREEZE_WRITE); + put_super(s); + } +} +EXPORT_SYMBOL(get_super_thawed); + +/** * get_active_super - get an active reference to the superblock of a device * @bdev: device to get the superblock for * diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index cbcb7bea38e..53db20ee3e7 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -139,10 +139,10 @@ xfs_qm_adjust_dqtimers( if (!d->d_btimer) { if ((d->d_blk_softlimit && - (be64_to_cpu(d->d_bcount) >= + (be64_to_cpu(d->d_bcount) > be64_to_cpu(d->d_blk_softlimit))) || (d->d_blk_hardlimit && - (be64_to_cpu(d->d_bcount) >= + (be64_to_cpu(d->d_bcount) > be64_to_cpu(d->d_blk_hardlimit)))) { d->d_btimer = cpu_to_be32(get_seconds() + mp->m_quotainfo->qi_btimelimit); @@ -151,10 +151,10 @@ xfs_qm_adjust_dqtimers( } } else { if ((!d->d_blk_softlimit || - (be64_to_cpu(d->d_bcount) < + (be64_to_cpu(d->d_bcount) <= be64_to_cpu(d->d_blk_softlimit))) && (!d->d_blk_hardlimit || - (be64_to_cpu(d->d_bcount) < + (be64_to_cpu(d->d_bcount) <= be64_to_cpu(d->d_blk_hardlimit)))) { d->d_btimer = 0; } @@ -162,10 +162,10 @@ xfs_qm_adjust_dqtimers( if (!d->d_itimer) { if ((d->d_ino_softlimit && - (be64_to_cpu(d->d_icount) >= + (be64_to_cpu(d->d_icount) > be64_to_cpu(d->d_ino_softlimit))) || (d->d_ino_hardlimit && - (be64_to_cpu(d->d_icount) >= + (be64_to_cpu(d->d_icount) > be64_to_cpu(d->d_ino_hardlimit)))) { d->d_itimer = cpu_to_be32(get_seconds() + mp->m_quotainfo->qi_itimelimit); @@ -174,10 +174,10 @@ xfs_qm_adjust_dqtimers( } } else { if ((!d->d_ino_softlimit || - (be64_to_cpu(d->d_icount) < + (be64_to_cpu(d->d_icount) <= be64_to_cpu(d->d_ino_softlimit))) && (!d->d_ino_hardlimit || - (be64_to_cpu(d->d_icount) < + (be64_to_cpu(d->d_icount) <= be64_to_cpu(d->d_ino_hardlimit)))) { d->d_itimer = 0; } @@ -185,10 +185,10 @@ xfs_qm_adjust_dqtimers( if (!d->d_rtbtimer) { if ((d->d_rtb_softlimit && - (be64_to_cpu(d->d_rtbcount) >= + (be64_to_cpu(d->d_rtbcount) > be64_to_cpu(d->d_rtb_softlimit))) || (d->d_rtb_hardlimit && - (be64_to_cpu(d->d_rtbcount) >= + (be64_to_cpu(d->d_rtbcount) > be64_to_cpu(d->d_rtb_hardlimit)))) { d->d_rtbtimer = cpu_to_be32(get_seconds() + mp->m_quotainfo->qi_rtbtimelimit); @@ -197,10 +197,10 @@ xfs_qm_adjust_dqtimers( } } else { if ((!d->d_rtb_softlimit || - (be64_to_cpu(d->d_rtbcount) < + (be64_to_cpu(d->d_rtbcount) <= be64_to_cpu(d->d_rtb_softlimit))) && (!d->d_rtb_hardlimit || - (be64_to_cpu(d->d_rtbcount) < + (be64_to_cpu(d->d_rtbcount) <= be64_to_cpu(d->d_rtb_hardlimit)))) { d->d_rtbtimer = 0; } diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 15ff5392fb6..0ed9ee77937 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1981,7 +1981,7 @@ xfs_qm_dqcheck( if (!errs && ddq->d_id) { if (ddq->d_blk_softlimit && - be64_to_cpu(ddq->d_bcount) >= + be64_to_cpu(ddq->d_bcount) > be64_to_cpu(ddq->d_blk_softlimit)) { if (!ddq->d_btimer) { if (flags & XFS_QMOPT_DOWARN) @@ -1992,7 +1992,7 @@ xfs_qm_dqcheck( } } if (ddq->d_ino_softlimit && - be64_to_cpu(ddq->d_icount) >= + be64_to_cpu(ddq->d_icount) > be64_to_cpu(ddq->d_ino_softlimit)) { if (!ddq->d_itimer) { if (flags & XFS_QMOPT_DOWARN) @@ -2003,7 +2003,7 @@ xfs_qm_dqcheck( } } if (ddq->d_rtb_softlimit && - be64_to_cpu(ddq->d_rtbcount) >= + be64_to_cpu(ddq->d_rtbcount) > be64_to_cpu(ddq->d_rtb_softlimit)) { if (!ddq->d_rtbtimer) { if (flags & XFS_QMOPT_DOWARN) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index eafbcff81f3..711a86e39ff 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -813,11 +813,11 @@ xfs_qm_export_dquot( (XFS_IS_OQUOTA_ENFORCED(mp) && (dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) && dst->d_id != 0) { - if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) && + if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) && (dst->d_blk_softlimit > 0)) { ASSERT(dst->d_btimer != 0); } - if (((int) dst->d_icount >= (int) dst->d_ino_softlimit) && + if (((int) dst->d_icount > (int) dst->d_ino_softlimit) && (dst->d_ino_softlimit > 0)) { ASSERT(dst->d_itimer != 0); } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 329b06aba1c..7adcdf15ae0 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -1151,8 +1151,8 @@ xfs_trans_add_item( { struct xfs_log_item_desc *lidp; - ASSERT(lip->li_mountp = tp->t_mountp); - ASSERT(lip->li_ailp = tp->t_mountp->m_ail); + ASSERT(lip->li_mountp == tp->t_mountp); + ASSERT(lip->li_ailp == tp->t_mountp->m_ail); lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS); diff --git a/fs/xfs/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c index 4d00ee67792..c4ba366d24e 100644 --- a/fs/xfs/xfs_trans_dquot.c +++ b/fs/xfs/xfs_trans_dquot.c @@ -649,12 +649,12 @@ xfs_trans_dqresv( * nblks. */ if (hardlimit > 0ULL && - hardlimit <= nblks + *resbcountp) { + hardlimit < nblks + *resbcountp) { xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN); goto error_return; } if (softlimit > 0ULL && - softlimit <= nblks + *resbcountp) { + softlimit < nblks + *resbcountp) { if ((timer != 0 && get_seconds() > timer) || (warns != 0 && warns >= warnlimit)) { xfs_quota_warn(mp, dqp, @@ -677,11 +677,13 @@ xfs_trans_dqresv( if (!softlimit) softlimit = q->qi_isoftlimit; - if (hardlimit > 0ULL && count >= hardlimit) { + if (hardlimit > 0ULL && + hardlimit < ninos + count) { xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN); goto error_return; } - if (softlimit > 0ULL && count >= softlimit) { + if (softlimit > 0ULL && + softlimit < ninos + count) { if ((timer != 0 && get_seconds() > timer) || (warns != 0 && warns >= warnlimit)) { xfs_quota_warn(mp, dqp, diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h new file mode 100644 index 00000000000..a6806a94250 --- /dev/null +++ b/include/asm-generic/io-64-nonatomic-hi-lo.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_ +#define _ASM_IO_64_NONATOMIC_HI_LO_H_ + +#include <linux/io.h> +#include <asm-generic/int-ll64.h> + +#ifndef readq +static inline __u64 readq(const volatile void __iomem *addr) +{ + const volatile u32 __iomem *p = addr; + u32 low, high; + + high = readl(p + 1); + low = readl(p); + + return low + ((u64)high << 32); +} +#endif + +#ifndef writeq +static inline void writeq(__u64 val, volatile void __iomem *addr) +{ + writel(val >> 32, addr + 4); + writel(val, addr); +} +#endif + +#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */ diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h new file mode 100644 index 00000000000..ca546b1ff8b --- /dev/null +++ b/include/asm-generic/io-64-nonatomic-lo-hi.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_ +#define _ASM_IO_64_NONATOMIC_LO_HI_H_ + +#include <linux/io.h> +#include <asm-generic/int-ll64.h> + +#ifndef readq +static inline __u64 readq(const volatile void __iomem *addr) +{ + const volatile u32 __iomem *p = addr; + u32 low, high; + + low = readl(p); + high = readl(p + 1); + + return low + ((u64)high << 32); +} +#endif + +#ifndef writeq +static inline void writeq(__u64 val, volatile void __iomem *addr) +{ + writel(val, addr); + writel(val >> 32, addr + 4); +} +#endif + +#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */ diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h index 8a3d4fde260..6afd7d6a989 100644 --- a/include/asm-generic/iomap.h +++ b/include/asm-generic/iomap.h @@ -70,7 +70,7 @@ extern void ioport_unmap(void __iomem *); /* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */ struct pci_dev; extern void pci_iounmap(struct pci_dev *dev, void __iomem *); -#else +#elif defined(CONFIG_GENERIC_IOMAP) struct pci_dev; static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { } diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h index e58fcf89137..ce37349860f 100644 --- a/include/asm-generic/pci_iomap.h +++ b/include/asm-generic/pci_iomap.h @@ -25,7 +25,7 @@ extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port, #define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr)) #endif -#else +#elif defined(CONFIG_GENERIC_PCI_IOMAP) static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) { return NULL; diff --git a/include/asm-generic/poll.h b/include/asm-generic/poll.h index 44bce836d35..9ce7f44aebd 100644 --- a/include/asm-generic/poll.h +++ b/include/asm-generic/poll.h @@ -28,6 +28,8 @@ #define POLLRDHUP 0x2000 #endif +#define POLLFREE 0x4000 /* currently only for epoll */ + struct pollfd { int fd; short events; diff --git a/include/drm/Kbuild b/include/drm/Kbuild index a5c0e10fd47..1e38a19d68f 100644 --- a/include/drm/Kbuild +++ b/include/drm/Kbuild @@ -2,6 +2,7 @@ header-y += drm.h header-y += drm_fourcc.h header-y += drm_mode.h header-y += drm_sarea.h +header-y += exynos_drm.h header-y += i810_drm.h header-y += i915_drm.h header-y += mga_drm.h diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 5e120f1c5cd..1ed3aae893a 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -97,15 +97,30 @@ struct drm_exynos_plane_set_zpos { #define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS DRM_IOWR(DRM_COMMAND_BASE + \ DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos) +#ifdef __KERNEL__ + /** - * Platform Specific Structure for DRM based FIMD. + * A structure for lcd panel information. * * @timing: default video mode for initializing + * @width_mm: physical size of lcd width. + * @height_mm: physical size of lcd height. + */ +struct exynos_drm_panel_info { + struct fb_videomode timing; + u32 width_mm; + u32 height_mm; +}; + +/** + * Platform Specific Structure for DRM based FIMD. + * + * @panel: default panel info for initializing * @default_win: default window layer number to be used for UI. * @bpp: default bit per pixel. */ struct exynos_drm_fimd_pdata { - struct fb_videomode timing; + struct exynos_drm_panel_info panel; u32 vidcon0; u32 vidcon1; unsigned int default_win; @@ -139,4 +154,5 @@ struct exynos_drm_hdmi_pdata { unsigned int bpp; }; -#endif +#endif /* __KERNEL__ */ +#endif /* _EXYNOS_DRM_H_ */ diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 724c69c40bb..a9fab831caf 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -60,6 +60,9 @@ extern struct bus_type amba_bustype; int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); +struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); +void amba_device_put(struct amba_device *); +int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); @@ -89,4 +92,37 @@ void amba_release_regions(struct amba_device *); #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) #define amba_part(d) AMBA_PART_BITS((d)->periphid) +#define __AMBA_DEV(busid, data, mask) \ + { \ + .coherent_dma_mask = mask, \ + .init_name = busid, \ + .platform_data = data, \ + } + +/* + * APB devices do not themselves have the ability to address memory, + * so DMA masks should be zero (much like USB peripheral devices.) + * The DMA controller DMA masks should be used instead (much like + * USB host controllers in conventional PCs.) + */ +#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, 0), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * AHB devices are DMA capable, so set their DMA masks + */ +#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, ~0ULL), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .dma_mask = ~0ULL, \ + .irq = irqs, \ + .periphid = id, \ +} + #endif diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h index 53ba65e30ca..1d14b1dc1ae 100644 --- a/include/linux/atmel_tc.h +++ b/include/linux/atmel_tc.h @@ -34,10 +34,19 @@ struct clk; /** + * struct atmel_tcb_config - SoC data for a Timer/Counter Block + * @counter_width: size in bits of a timer counter register + */ +struct atmel_tcb_config { + size_t counter_width; +}; + +/** * struct atmel_tc - information about a Timer/Counter Block * @pdev: physical device * @iomem: resource associated with the I/O register * @regs: mapping through which the I/O registers can be accessed + * @tcb_config: configuration data from SoC * @irq: irq for each of the three channels * @clk: internal clock source for each of the three channels * @node: list node, for tclib internal use @@ -54,6 +63,7 @@ struct atmel_tc { struct platform_device *pdev; struct resource *iomem; void __iomem *regs; + struct atmel_tcb_config *tcb_config; int irq[3]; struct clk *clk[3]; struct list_head node; diff --git a/include/linux/compat.h b/include/linux/compat.h index 41c9f6515f4..7e05fcee75a 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -561,5 +561,9 @@ asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, unsigned long liovcnt, const struct compat_iovec __user *rvec, unsigned long riovcnt, unsigned long flags); +#else + +#define is_compat_task() (0) + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ diff --git a/include/linux/dcache.h b/include/linux/dcache.h index d64a55b23af..4270bedd230 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -54,18 +54,17 @@ extern struct dentry_stat_t dentry_stat; static inline int dentry_cmp(const unsigned char *cs, size_t scount, const unsigned char *ct, size_t tcount) { - int ret; if (scount != tcount) return 1; + do { - ret = (*cs != *ct); - if (ret) - break; + if (*cs != *ct) + return 1; cs++; ct++; tcount--; } while (tcount); - return ret; + return 0; } /* Name hashing routines. Initial hash value */ @@ -89,14 +88,7 @@ static inline unsigned long end_name_hash(unsigned long hash) } /* Compute the hash for a name string. */ -static inline unsigned int -full_name_hash(const unsigned char *name, unsigned int len) -{ - unsigned long hash = init_name_hash(); - while (len--) - hash = partial_name_hash(*name++, hash); - return end_name_hash(hash); -} +extern unsigned int full_name_hash(const unsigned char *, unsigned int); /* * Try to keep struct dentry aligned on 64 byte cachelines (this will @@ -309,7 +301,8 @@ extern struct dentry *d_ancestor(struct dentry *, struct dentry *); extern struct dentry *d_lookup(struct dentry *, struct qstr *); extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *); extern struct dentry *__d_lookup(struct dentry *, struct qstr *); -extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name, +extern struct dentry *__d_lookup_rcu(const struct dentry *parent, + const struct qstr *name, unsigned *seq, struct inode **inode); /** diff --git a/include/linux/digsig.h b/include/linux/digsig.h index b01558b1581..6f85a070bb4 100644 --- a/include/linux/digsig.h +++ b/include/linux/digsig.h @@ -30,7 +30,7 @@ enum digest_algo { struct pubkey_hdr { uint8_t version; /* key format version */ - time_t timestamp; /* key made, always 0 for now */ + uint32_t timestamp; /* key made, always 0 for now */ uint8_t algo; uint8_t nmpi; char mpi[0]; @@ -38,7 +38,7 @@ struct pubkey_hdr { struct signature_hdr { uint8_t version; /* signature format version */ - time_t timestamp; /* signature made */ + uint32_t timestamp; /* signature made */ uint8_t algo; uint8_t hash; uint8_t keyid[8]; diff --git a/include/linux/fs.h b/include/linux/fs.h index 386da09f229..69cd5bb640f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2496,6 +2496,7 @@ extern void get_filesystem(struct file_system_type *fs); extern void put_filesystem(struct file_system_type *fs); extern struct file_system_type *get_fs_type(const char *name); extern struct super_block *get_super(struct block_device *); +extern struct super_block *get_super_thawed(struct block_device *); extern struct super_block *get_active_super(struct block_device *bdev); extern void drop_super(struct super_block *sb); extern void iterate_supers(void (*)(struct super_block *, void *), void *); diff --git a/include/linux/if_link.h b/include/linux/if_link.h index c52d4b5f872..4b24ff453ae 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -137,6 +137,7 @@ enum { IFLA_AF_SPEC, IFLA_GROUP, /* Group the device belongs to */ IFLA_NET_NS_FD, + IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ __IFLA_MAX }; diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index 8797ed16feb..4dd5bd6994a 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -285,8 +285,8 @@ struct ebt_table { struct module *me; }; -#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \ - ~(__alignof__(struct ebt_replace)-1)) +#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \ + ~(__alignof__(struct _xt_align)-1)) extern struct ebt_table *ebt_register_table(struct net *net, const struct ebt_table *table); extern void ebt_unregister_table(struct net *net, struct ebt_table *table); diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a764cef06b7..d6ba9a12591 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -614,7 +614,6 @@ struct nfs_getaclargs { size_t acl_len; unsigned int acl_pgbase; struct page ** acl_pages; - struct page * acl_scratch; struct nfs4_sequence_args seq_args; }; @@ -624,6 +623,7 @@ struct nfs_getaclres { size_t acl_len; size_t acl_data_offset; int acl_flags; + struct page * acl_scratch; struct nfs4_sequence_res seq_res; }; diff --git a/include/linux/regset.h b/include/linux/regset.h index 8abee655622..686f37327a4 100644 --- a/include/linux/regset.h +++ b/include/linux/regset.h @@ -335,8 +335,11 @@ static inline int copy_regset_to_user(struct task_struct *target, { const struct user_regset *regset = &view->regsets[setno]; + if (!regset->get) + return -EOPNOTSUPP; + if (!access_ok(VERIFY_WRITE, data, size)) - return -EIO; + return -EFAULT; return regset->get(target, regset, offset, size, NULL, data); } @@ -358,8 +361,11 @@ static inline int copy_regset_from_user(struct task_struct *target, { const struct user_regset *regset = &view->regsets[setno]; + if (!regset->set) + return -EOPNOTSUPP; + if (!access_ok(VERIFY_READ, data, size)) - return -EIO; + return -EFAULT; return regset->set(target, regset, offset, size, NULL, data); } diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 8e872ead88b..577592ea0ea 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -602,6 +602,9 @@ struct tcamsg { #define TCA_ACT_TAB 1 /* attr type must be >=1 */ #define TCAA_MAX 1 +/* New extended info filters for IFLA_EXT_MASK */ +#define RTEXT_FILTER_VF (1 << 0) + /* End of information exported to user level */ #ifdef __KERNEL__ diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index 3ff4961da9b..247399b2979 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -61,13 +61,16 @@ static inline void signalfd_notify(struct task_struct *tsk, int sig) wake_up(&tsk->sighand->signalfd_wqh); } +extern void signalfd_cleanup(struct sighand_struct *sighand); + #else /* CONFIG_SIGNALFD */ static inline void signalfd_notify(struct task_struct *tsk, int sig) { } +static inline void signalfd_cleanup(struct sighand_struct *sighand) { } + #endif /* CONFIG_SIGNALFD */ #endif /* __KERNEL__ */ #endif /* _LINUX_SIGNALFD_H */ - diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 50db9b04a55..ae86adee374 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1465,6 +1465,16 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) } #endif /* NET_SKBUFF_DATA_USES_OFFSET */ +static inline void skb_mac_header_rebuild(struct sk_buff *skb) +{ + if (skb_mac_header_was_set(skb)) { + const unsigned char *old_mac = skb_mac_header(skb); + + skb_set_mac_header(skb, -skb->mac_len); + memmove(skb_mac_header(skb), old_mac, skb->mac_len); + } +} + static inline int skb_checksum_start_offset(const struct sk_buff *skb) { return skb->csum_start - skb_headroom(skb); diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 515669fa3c1..8ec1153ff57 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -624,7 +624,7 @@ asmlinkage long sys_socketpair(int, int, int, int __user *); asmlinkage long sys_socketcall(int call, unsigned long __user *args); asmlinkage long sys_listen(int, int); asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds, - long timeout); + int timeout); asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp); asmlinkage long sys_old_select(struct sel_arg_struct __user *arg); diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 31fdb4c6ee3..0b83acd3360 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -61,12 +61,6 @@ #define USB_PORT_FEAT_TEST 21 #define USB_PORT_FEAT_INDICATOR 22 #define USB_PORT_FEAT_C_PORT_L1 23 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 /* * Port feature selectors added by USB 3.0 spec. @@ -75,8 +69,8 @@ #define USB_PORT_FEAT_LINK_STATE 5 #define USB_PORT_FEAT_U1_TIMEOUT 23 #define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_LINK_STATE 25 -#define USB_PORT_FEAT_C_CONFIG_ERR 26 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 #define USB_PORT_FEAT_BH_PORT_RESET 28 #define USB_PORT_FEAT_C_BH_PORT_RESET 29 diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index abaad6ed9b8..4a82ca0bb0b 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -256,4 +256,6 @@ void l2cap_exit(void); int sco_init(void); void sco_exit(void); +void bt_sock_reclassify_lock(struct sock *sk, int proto); + #endif /* __BLUETOOTH_H */ diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index ea9231f4935..453893b3120 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -540,7 +540,7 @@ void hci_conn_put_device(struct hci_conn *conn); static inline void hci_conn_hold(struct hci_conn *conn) { atomic_inc(&conn->refcnt); - cancel_delayed_work_sync(&conn->disc_work); + cancel_delayed_work(&conn->disc_work); } static inline void hci_conn_put(struct hci_conn *conn) @@ -559,9 +559,9 @@ static inline void hci_conn_put(struct hci_conn *conn) } else { timeo = msecs_to_jiffies(10); } - cancel_delayed_work_sync(&conn->disc_work); + cancel_delayed_work(&conn->disc_work); queue_delayed_work(conn->hdev->workqueue, - &conn->disc_work, jiffies + timeo); + &conn->disc_work, timeo); } } diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 68f58915069..b1664ed884e 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -611,7 +611,7 @@ static inline void l2cap_set_timer(struct l2cap_chan *chan, { BT_DBG("chan %p state %d timeout %ld", chan, chan->state, timeout); - if (!__cancel_delayed_work(work)) + if (!cancel_delayed_work(work)) l2cap_chan_hold(chan); schedule_delayed_work(work, timeout); } @@ -619,20 +619,20 @@ static inline void l2cap_set_timer(struct l2cap_chan *chan, static inline void l2cap_clear_timer(struct l2cap_chan *chan, struct delayed_work *work) { - if (__cancel_delayed_work(work)) + if (cancel_delayed_work(work)) l2cap_chan_put(chan); } #define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t)) #define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer) #define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \ - L2CAP_DEFAULT_RETRANS_TO); + msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO)); #define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer) #define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \ - L2CAP_DEFAULT_MONITOR_TO); + msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO)); #define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer) #define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \ - L2CAP_DEFAULT_ACK_TO); + msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO)); #define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer) static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2) @@ -834,7 +834,7 @@ int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid); struct l2cap_chan *l2cap_chan_create(struct sock *sk); void l2cap_chan_close(struct l2cap_chan *chan, int reason); void l2cap_chan_destroy(struct l2cap_chan *chan); -inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, +int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst); int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len, u32 priority); diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 8a2b0ae7dbd..ab86036bbf0 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -209,7 +209,7 @@ extern struct nf_conntrack_tuple_hash * __nf_conntrack_find(struct net *net, u16 zone, const struct nf_conntrack_tuple *tuple); -extern void nf_conntrack_hash_insert(struct nf_conn *ct); +extern int nf_conntrack_hash_check_insert(struct nf_conn *ct); extern void nf_ct_delete_from_lists(struct nf_conn *ct); extern void nf_ct_insert_dying_list(struct nf_conn *ct); diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h index 678f1ffaf84..37029390197 100644 --- a/include/net/rtnetlink.h +++ b/include/net/rtnetlink.h @@ -6,7 +6,7 @@ typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *); typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *); -typedef u16 (*rtnl_calcit_func)(struct sk_buff *); +typedef u16 (*rtnl_calcit_func)(struct sk_buff *, struct nlmsghdr *); extern int __rtnl_register(int protocol, int msgtype, rtnl_doit_func, rtnl_dumpit_func, diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h index 6ba596b07a7..e33ed1bfa11 100644 --- a/include/trace/events/sched.h +++ b/include/trace/events/sched.h @@ -370,56 +370,6 @@ TRACE_EVENT(sched_stat_runtime, (unsigned long long)__entry->vruntime) ); -#ifdef CREATE_TRACE_POINTS -static inline u64 trace_get_sleeptime(struct task_struct *tsk) -{ -#ifdef CONFIG_SCHEDSTATS - u64 block, sleep; - - block = tsk->se.statistics.block_start; - sleep = tsk->se.statistics.sleep_start; - tsk->se.statistics.block_start = 0; - tsk->se.statistics.sleep_start = 0; - - return block ? block : sleep ? sleep : 0; -#else - return 0; -#endif -} -#endif - -/* - * Tracepoint for accounting sleeptime (time the task is sleeping - * or waiting for I/O). - */ -TRACE_EVENT(sched_stat_sleeptime, - - TP_PROTO(struct task_struct *tsk, u64 now), - - TP_ARGS(tsk, now), - - TP_STRUCT__entry( - __array( char, comm, TASK_COMM_LEN ) - __field( pid_t, pid ) - __field( u64, sleeptime ) - ), - - TP_fast_assign( - memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN); - __entry->pid = tsk->pid; - __entry->sleeptime = trace_get_sleeptime(tsk); - __entry->sleeptime = __entry->sleeptime ? - now - __entry->sleeptime : 0; - ) - TP_perf_assign( - __perf_count(__entry->sleeptime); - ), - - TP_printk("comm=%s pid=%d sleeptime=%Lu [ns]", - __entry->comm, __entry->pid, - (unsigned long long)__entry->sleeptime) -); - /* * Tracepoint for showing priority inheritance modifying a tasks * priority. diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index b7971d6f38b..ee706ce44aa 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -651,10 +651,10 @@ int __init init_hw_breakpoint(void) err_alloc: for_each_possible_cpu(err_cpu) { - if (err_cpu == cpu) - break; for (i = 0; i < TYPE_MAX; i++) kfree(per_cpu(nr_task_bp_pinned[i], cpu)); + if (err_cpu == cpu) + break; } return -ENOMEM; diff --git a/kernel/fork.c b/kernel/fork.c index b77fd559c78..e2cd3e2a5ae 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -66,6 +66,7 @@ #include <linux/user-return-notifier.h> #include <linux/oom.h> #include <linux/khugepaged.h> +#include <linux/signalfd.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -935,8 +936,10 @@ static int copy_sighand(unsigned long clone_flags, struct task_struct *tsk) void __cleanup_sighand(struct sighand_struct *sighand) { - if (atomic_dec_and_test(&sighand->count)) + if (atomic_dec_and_test(&sighand->count)) { + signalfd_cleanup(sighand); kmem_cache_free(sighand_cachep, sighand); + } } diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c index 342d8f44e40..0119b9d467a 100644 --- a/kernel/irq/autoprobe.c +++ b/kernel/irq/autoprobe.c @@ -53,7 +53,7 @@ unsigned long probe_irq_on(void) if (desc->irq_data.chip->irq_set_type) desc->irq_data.chip->irq_set_type(&desc->irq_data, IRQ_TYPE_PROBE); - irq_startup(desc); + irq_startup(desc, false); } raw_spin_unlock_irq(&desc->lock); } @@ -70,7 +70,7 @@ unsigned long probe_irq_on(void) raw_spin_lock_irq(&desc->lock); if (!desc->action && irq_settings_can_probe(desc)) { desc->istate |= IRQS_AUTODETECT | IRQS_WAITING; - if (irq_startup(desc)) + if (irq_startup(desc, false)) desc->istate |= IRQS_PENDING; } raw_spin_unlock_irq(&desc->lock); diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index f7c543a801d..fb7db75ee0c 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -157,19 +157,22 @@ static void irq_state_set_masked(struct irq_desc *desc) irqd_set(&desc->irq_data, IRQD_IRQ_MASKED); } -int irq_startup(struct irq_desc *desc) +int irq_startup(struct irq_desc *desc, bool resend) { + int ret = 0; + irq_state_clr_disabled(desc); desc->depth = 0; if (desc->irq_data.chip->irq_startup) { - int ret = desc->irq_data.chip->irq_startup(&desc->irq_data); + ret = desc->irq_data.chip->irq_startup(&desc->irq_data); irq_state_clr_masked(desc); - return ret; + } else { + irq_enable(desc); } - - irq_enable(desc); - return 0; + if (resend) + check_irq_resend(desc, desc->irq_data.irq); + return ret; } void irq_shutdown(struct irq_desc *desc) @@ -330,6 +333,24 @@ out_unlock: } EXPORT_SYMBOL_GPL(handle_simple_irq); +/* + * Called unconditionally from handle_level_irq() and only for oneshot + * interrupts from handle_fasteoi_irq() + */ +static void cond_unmask_irq(struct irq_desc *desc) +{ + /* + * We need to unmask in the following cases: + * - Standard level irq (IRQF_ONESHOT is not set) + * - Oneshot irq which did not wake the thread (caused by a + * spurious interrupt or a primary handler handling it + * completely). + */ + if (!irqd_irq_disabled(&desc->irq_data) && + irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot) + unmask_irq(desc); +} + /** * handle_level_irq - Level type irq handler * @irq: the interrupt number @@ -362,8 +383,8 @@ handle_level_irq(unsigned int irq, struct irq_desc *desc) handle_irq_event(desc); - if (!irqd_irq_disabled(&desc->irq_data) && !(desc->istate & IRQS_ONESHOT)) - unmask_irq(desc); + cond_unmask_irq(desc); + out_unlock: raw_spin_unlock(&desc->lock); } @@ -417,6 +438,9 @@ handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc) preflow_handler(desc); handle_irq_event(desc); + if (desc->istate & IRQS_ONESHOT) + cond_unmask_irq(desc); + out_eoi: desc->irq_data.chip->irq_eoi(&desc->irq_data); out_unlock: @@ -625,7 +649,7 @@ __irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, irq_settings_set_noprobe(desc); irq_settings_set_norequest(desc); irq_settings_set_nothread(desc); - irq_startup(desc); + irq_startup(desc, true); } out: irq_put_desc_busunlock(desc, flags); diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index b7952316016..40378ff877e 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -67,7 +67,7 @@ extern int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, extern void __disable_irq(struct irq_desc *desc, unsigned int irq, bool susp); extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume); -extern int irq_startup(struct irq_desc *desc); +extern int irq_startup(struct irq_desc *desc, bool resend); extern void irq_shutdown(struct irq_desc *desc); extern void irq_enable(struct irq_desc *desc); extern void irq_disable(struct irq_desc *desc); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index a9a9dbe49fe..32313c08444 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1027,7 +1027,7 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) desc->istate |= IRQS_ONESHOT; if (irq_settings_can_autoenable(desc)) - irq_startup(desc); + irq_startup(desc, true); else /* Undo nested disables: */ desc->depth = 1; diff --git a/kernel/pid.c b/kernel/pid.c index ce8e00deacc..9f08dfabaf1 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -543,12 +543,12 @@ struct pid *find_ge_pid(int nr, struct pid_namespace *ns) */ void __init pidhash_init(void) { - int i, pidhash_size; + unsigned int i, pidhash_size; pid_hash = alloc_large_system_hash("PID", sizeof(*pid_hash), 0, 18, HASH_EARLY | HASH_SMALL, &pidhash_shift, NULL, 4096); - pidhash_size = 1 << pidhash_shift; + pidhash_size = 1U << pidhash_shift; for (i = 0; i < pidhash_size; i++) INIT_HLIST_HEAD(&pid_hash[i]); diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5255c9d2e05..33a0676ea74 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1932,7 +1932,6 @@ static void finish_task_switch(struct rq *rq, struct task_struct *prev) local_irq_enable(); #endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */ finish_lock_switch(rq, prev); - trace_sched_stat_sleeptime(current, rq->clock); fire_sched_in_preempt_notifiers(current); if (mm) @@ -6729,7 +6728,7 @@ int __init sched_create_sysfs_power_savings_entries(struct device *dev) static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action & ~CPU_TASKS_FROZEN) { + switch (action) { case CPU_ONLINE: case CPU_DOWN_FAILED: cpuset_update_active_cpus(); @@ -6742,7 +6741,7 @@ static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action, static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action, void *hcpu) { - switch (action & ~CPU_TASKS_FROZEN) { + switch (action) { case CPU_DOWN_PREPARE: cpuset_update_active_cpus(); return NOTIFY_OK; diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 7c6414fc669..aca16b843b7 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -1003,6 +1003,7 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se) if (unlikely(delta > se->statistics.sleep_max)) se->statistics.sleep_max = delta; + se->statistics.sleep_start = 0; se->statistics.sum_sleep_runtime += delta; if (tsk) { @@ -1019,6 +1020,7 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se) if (unlikely(delta > se->statistics.block_max)) se->statistics.block_max = delta; + se->statistics.block_start = 0; se->statistics.sum_sleep_runtime += delta; if (tsk) { diff --git a/mm/memblock.c b/mm/memblock.c index 77b5f227e1d..99f28559950 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -99,9 +99,6 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t start, phys_addr_t this_start, this_end, cand; u64 i; - /* align @size to avoid excessive fragmentation on reserved array */ - size = round_up(size, align); - /* pump up @end */ if (end == MEMBLOCK_ALLOC_ACCESSIBLE) end = memblock.current_limit; @@ -731,6 +728,9 @@ static phys_addr_t __init memblock_alloc_base_nid(phys_addr_t size, { phys_addr_t found; + /* align @size to avoid excessive fragmentation on reserved array */ + size = round_up(size, align); + found = memblock_find_in_range_node(0, max_addr, size, align, nid); if (found && !memblock_reserve(found, size)) return found; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 6728a7ae6f2..228d6461c12 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4414,6 +4414,9 @@ static void mem_cgroup_usage_unregister_event(struct cgroup *cgrp, */ BUG_ON(!thresholds); + if (!thresholds->primary) + goto unlock; + usage = mem_cgroup_usage(memcg, type == _MEMSWAP); /* Check if a threshold crossed before removing */ @@ -4462,7 +4465,7 @@ swap_buffers: /* To be sure that nobody uses thresholds */ synchronize_rcu(); - +unlock: mutex_unlock(&memcg->thresholds_lock); } diff --git a/mm/nommu.c b/mm/nommu.c index b982290fd96..f59e170fceb 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -696,9 +696,11 @@ static void add_vma_to_mm(struct mm_struct *mm, struct vm_area_struct *vma) if (vma->vm_file) { mapping = vma->vm_file->f_mapping; + mutex_lock(&mapping->i_mmap_mutex); flush_dcache_mmap_lock(mapping); vma_prio_tree_insert(vma, &mapping->i_mmap); flush_dcache_mmap_unlock(mapping); + mutex_unlock(&mapping->i_mmap_mutex); } /* add the VMA to the tree */ @@ -760,9 +762,11 @@ static void delete_vma_from_mm(struct vm_area_struct *vma) if (vma->vm_file) { mapping = vma->vm_file->f_mapping; + mutex_lock(&mapping->i_mmap_mutex); flush_dcache_mmap_lock(mapping); vma_prio_tree_remove(vma, &mapping->i_mmap); flush_dcache_mmap_unlock(mapping); + mutex_unlock(&mapping->i_mmap_mutex); } /* remove from the MM's tree and list */ @@ -775,8 +779,6 @@ static void delete_vma_from_mm(struct vm_area_struct *vma) if (vma->vm_next) vma->vm_next->vm_prev = vma->vm_prev; - - vma->vm_mm = NULL; } /* @@ -2052,6 +2054,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size, high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; down_write(&nommu_region_sem); + mutex_lock(&inode->i_mapping->i_mmap_mutex); /* search for VMAs that fall within the dead zone */ vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap, @@ -2059,6 +2062,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size, /* found one - only interested if it's shared out of the page * cache */ if (vma->vm_flags & VM_SHARED) { + mutex_unlock(&inode->i_mapping->i_mmap_mutex); up_write(&nommu_region_sem); return -ETXTBSY; /* not quite true, but near enough */ } @@ -2086,6 +2090,7 @@ int nommu_shrink_inode_mappings(struct inode *inode, size_t size, } } + mutex_unlock(&inode->i_mapping->i_mmap_mutex); up_write(&nommu_region_sem); return 0; } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d2186ecb36f..a13ded1938f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5236,6 +5236,7 @@ void *__init alloc_large_system_hash(const char *tablename, max = ((unsigned long long)nr_all_pages << PAGE_SHIFT) >> 4; do_div(max, bucketsize); } + max = min(max, 0x80000000ULL); if (numentries > max) numentries = max; diff --git a/net/atm/clip.c b/net/atm/clip.c index c12c2582457..127fe70a1ba 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -46,8 +46,8 @@ static struct net_device *clip_devs; static struct atm_vcc *atmarpd; -static struct neigh_table clip_tbl; static struct timer_list idle_timer; +static const struct neigh_ops clip_neigh_ops; static int to_atmarpd(enum atmarp_ctrl_type type, int itf, __be32 ip) { @@ -123,6 +123,8 @@ static int neigh_check_cb(struct neighbour *n) struct atmarp_entry *entry = neighbour_priv(n); struct clip_vcc *cv; + if (n->ops != &clip_neigh_ops) + return 0; for (cv = entry->vccs; cv; cv = cv->next) { unsigned long exp = cv->last_use + cv->idle_timeout; @@ -154,10 +156,10 @@ static int neigh_check_cb(struct neighbour *n) static void idle_timer_check(unsigned long dummy) { - write_lock(&clip_tbl.lock); - __neigh_for_each_release(&clip_tbl, neigh_check_cb); + write_lock(&arp_tbl.lock); + __neigh_for_each_release(&arp_tbl, neigh_check_cb); mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ); - write_unlock(&clip_tbl.lock); + write_unlock(&arp_tbl.lock); } static int clip_arp_rcv(struct sk_buff *skb) diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index ef92864ac62..72eb187a5f6 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -71,19 +71,16 @@ static const char *const bt_slock_key_strings[BT_MAX_PROTO] = { "slock-AF_BLUETOOTH-BTPROTO_AVDTP", }; -static inline void bt_sock_reclassify_lock(struct socket *sock, int proto) +void bt_sock_reclassify_lock(struct sock *sk, int proto) { - struct sock *sk = sock->sk; - - if (!sk) - return; - + BUG_ON(!sk); BUG_ON(sock_owned_by_user(sk)); sock_lock_init_class_and_name(sk, bt_slock_key_strings[proto], &bt_slock_key[proto], bt_key_strings[proto], &bt_lock_key[proto]); } +EXPORT_SYMBOL(bt_sock_reclassify_lock); int bt_sock_register(int proto, const struct net_proto_family *ops) { @@ -145,7 +142,8 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto, if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) { err = bt_proto[proto]->create(net, sock, proto, kern); - bt_sock_reclassify_lock(sock, proto); + if (!err) + bt_sock_reclassify_lock(sock->sk, proto); module_put(bt_proto[proto]->owner); } diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 3db432473ad..07bc69ed949 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -635,6 +635,10 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) { struct hci_cp_auth_requested cp; + + /* encrypt must be pending if auth is also pending */ + set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend); + cp.handle = cpu_to_le16(conn->handle); hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 9de93714213..5aeb6249119 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -640,7 +640,8 @@ static int hci_dev_do_close(struct hci_dev *hdev) /* Reset device */ skb_queue_purge(&hdev->cmd_q); atomic_set(&hdev->cmd_cnt, 1); - if (!test_bit(HCI_RAW, &hdev->flags)) { + if (!test_bit(HCI_RAW, &hdev->flags) && + test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) { set_bit(HCI_INIT, &hdev->flags); __hci_request(hdev, hci_reset_req, 0, msecs_to_jiffies(250)); diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index faf0b11ac1d..32d338c30e6 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1018,10 +1018,10 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err) hci_chan_del(conn->hchan); if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) - __cancel_delayed_work(&conn->info_timer); + cancel_delayed_work_sync(&conn->info_timer); if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &hcon->pend)) { - __cancel_delayed_work(&conn->security_timer); + cancel_delayed_work_sync(&conn->security_timer); smp_chan_destroy(conn); } @@ -1120,7 +1120,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr return c1; } -inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst) +int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst) { struct sock *sk = chan->sk; bdaddr_t *src = &bt_sk(sk)->src; @@ -2574,7 +2574,7 @@ static inline int l2cap_command_rej(struct l2cap_conn *conn, struct l2cap_cmd_hd if ((conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) && cmd->ident == conn->info_ident) { - __cancel_delayed_work(&conn->info_timer); + cancel_delayed_work(&conn->info_timer); conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE; conn->info_ident = 0; @@ -2970,7 +2970,8 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr default: sk->sk_err = ECONNRESET; - __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT); + __set_chan_timer(chan, + msecs_to_jiffies(L2CAP_DISC_REJ_TIMEOUT)); l2cap_send_disconn_req(conn, chan, ECONNRESET); goto done; } @@ -3120,7 +3121,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE) return 0; - __cancel_delayed_work(&conn->info_timer); + cancel_delayed_work(&conn->info_timer); if (result != L2CAP_IR_SUCCESS) { conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE; @@ -4478,7 +4479,8 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt) if (encrypt == 0x00) { if (chan->sec_level == BT_SECURITY_MEDIUM) { __clear_chan_timer(chan); - __set_chan_timer(chan, L2CAP_ENC_TIMEOUT); + __set_chan_timer(chan, + msecs_to_jiffies(L2CAP_ENC_TIMEOUT)); } else if (chan->sec_level == BT_SECURITY_HIGH) l2cap_chan_close(chan, ECONNREFUSED); } else { @@ -4499,7 +4501,7 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) if (hcon->type == LE_LINK) { smp_distribute_keys(conn, 0); - __cancel_delayed_work(&conn->security_timer); + cancel_delayed_work(&conn->security_timer); } rcu_read_lock(); @@ -4546,7 +4548,8 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) L2CAP_CONN_REQ, sizeof(req), &req); } else { __clear_chan_timer(chan); - __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); + __set_chan_timer(chan, + msecs_to_jiffies(L2CAP_DISC_TIMEOUT)); } } else if (chan->state == BT_CONNECT2) { struct l2cap_conn_rsp rsp; @@ -4566,7 +4569,8 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) } } else { l2cap_state_change(chan, BT_DISCONN); - __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); + __set_chan_timer(chan, + msecs_to_jiffies(L2CAP_DISC_TIMEOUT)); res = L2CAP_CR_SEC_BLOCK; stat = L2CAP_CS_NO_INFO; } diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index c61d967012b..401d9428ae4 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -849,6 +849,8 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(void *data) if (!sk) return NULL; + bt_sock_reclassify_lock(sk, BTPROTO_L2CAP); + l2cap_sock_init(sk, parent); return l2cap_pi(sk)->chan; @@ -1002,7 +1004,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p INIT_LIST_HEAD(&bt_sk(sk)->accept_q); sk->sk_destruct = l2cap_sock_destruct; - sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT; + sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT); sock_reset_flag(sk, SOCK_ZAPPED); diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 501649bf559..8a602388f1e 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1164,12 +1164,18 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci) break; case BT_DISCONN: - /* When socket is closed and we are not RFCOMM - * initiator rfcomm_process_rx already calls - * rfcomm_session_put() */ - if (s->sock->sk->sk_state != BT_CLOSED) - if (list_empty(&s->dlcs)) - rfcomm_session_put(s); + /* rfcomm_session_put is called later so don't do + * anything here otherwise we will mess up the session + * reference counter: + * + * (a) when we are the initiator dlc_unlink will drive + * the reference counter to 0 (there is no initial put + * after session_add) + * + * (b) when we are not the initiator rfcomm_rx_process + * will explicitly call put to balance the initial hold + * done after session add. + */ break; } } diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index f066678faee..22169c3f148 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -956,6 +956,8 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc * if (!sk) goto done; + bt_sock_reclassify_lock(sk, BTPROTO_RFCOMM); + rfcomm_sock_init(sk, parent); bacpy(&bt_sk(sk)->src, &src); bacpy(&bt_sk(sk)->dst, &dst); diff --git a/net/core/neighbour.c b/net/core/neighbour.c index e287346e093..2a83914b027 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -826,6 +826,8 @@ next_elt: write_unlock_bh(&tbl->lock); cond_resched(); write_lock_bh(&tbl->lock); + nht = rcu_dereference_protected(tbl->nht, + lockdep_is_held(&tbl->lock)); } /* Cycle through all hash buckets every base_reachable_time/2 ticks. * ARP entry timeouts range from 1/2 base_reachable_time to 3/2 diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 65aebd45002..606a6e8f367 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -60,7 +60,6 @@ struct rtnl_link { }; static DEFINE_MUTEX(rtnl_mutex); -static u16 min_ifinfo_dump_size; void rtnl_lock(void) { @@ -724,10 +723,11 @@ static void copy_rtnl_link_stats64(void *v, const struct rtnl_link_stats64 *b) } /* All VF info */ -static inline int rtnl_vfinfo_size(const struct net_device *dev) +static inline int rtnl_vfinfo_size(const struct net_device *dev, + u32 ext_filter_mask) { - if (dev->dev.parent && dev_is_pci(dev->dev.parent)) { - + if (dev->dev.parent && dev_is_pci(dev->dev.parent) && + (ext_filter_mask & RTEXT_FILTER_VF)) { int num_vfs = dev_num_vf(dev->dev.parent); size_t size = nla_total_size(sizeof(struct nlattr)); size += nla_total_size(num_vfs * sizeof(struct nlattr)); @@ -766,7 +766,8 @@ static size_t rtnl_port_size(const struct net_device *dev) return port_self_size; } -static noinline size_t if_nlmsg_size(const struct net_device *dev) +static noinline size_t if_nlmsg_size(const struct net_device *dev, + u32 ext_filter_mask) { return NLMSG_ALIGN(sizeof(struct ifinfomsg)) + nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */ @@ -784,8 +785,9 @@ static noinline size_t if_nlmsg_size(const struct net_device *dev) + nla_total_size(4) /* IFLA_MASTER */ + nla_total_size(1) /* IFLA_OPERSTATE */ + nla_total_size(1) /* IFLA_LINKMODE */ - + nla_total_size(4) /* IFLA_NUM_VF */ - + rtnl_vfinfo_size(dev) /* IFLA_VFINFO_LIST */ + + nla_total_size(ext_filter_mask + & RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */ + + rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */ + rtnl_port_size(dev) /* IFLA_VF_PORTS + IFLA_PORT_SELF */ + rtnl_link_get_size(dev) /* IFLA_LINKINFO */ + rtnl_link_get_af_size(dev); /* IFLA_AF_SPEC */ @@ -868,7 +870,7 @@ static int rtnl_port_fill(struct sk_buff *skb, struct net_device *dev) static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, int type, u32 pid, u32 seq, u32 change, - unsigned int flags) + unsigned int flags, u32 ext_filter_mask) { struct ifinfomsg *ifm; struct nlmsghdr *nlh; @@ -941,10 +943,11 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, goto nla_put_failure; copy_rtnl_link_stats64(nla_data(attr), stats); - if (dev->dev.parent) + if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF)) NLA_PUT_U32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent)); - if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent) { + if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent + && (ext_filter_mask & RTEXT_FILTER_VF)) { int i; struct nlattr *vfinfo, *vf; @@ -1048,6 +1051,8 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) struct net_device *dev; struct hlist_head *head; struct hlist_node *node; + struct nlattr *tb[IFLA_MAX+1]; + u32 ext_filter_mask = 0; s_h = cb->args[0]; s_idx = cb->args[1]; @@ -1055,6 +1060,12 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) rcu_read_lock(); cb->seq = net->dev_base_seq; + nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, + ifla_policy); + + if (tb[IFLA_EXT_MASK]) + ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) { idx = 0; head = &net->dev_index_head[h]; @@ -1064,7 +1075,8 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, 0, - NLM_F_MULTI) <= 0) + NLM_F_MULTI, + ext_filter_mask) <= 0) goto out; nl_dump_check_consistent(cb, nlmsg_hdr(skb)); @@ -1100,6 +1112,7 @@ const struct nla_policy ifla_policy[IFLA_MAX+1] = { [IFLA_VF_PORTS] = { .type = NLA_NESTED }, [IFLA_PORT_SELF] = { .type = NLA_NESTED }, [IFLA_AF_SPEC] = { .type = NLA_NESTED }, + [IFLA_EXT_MASK] = { .type = NLA_U32 }, }; EXPORT_SYMBOL(ifla_policy); @@ -1509,8 +1522,6 @@ errout: if (send_addr_notify) call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); - min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev), - min_ifinfo_dump_size); return err; } @@ -1842,6 +1853,7 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) struct net_device *dev = NULL; struct sk_buff *nskb; int err; + u32 ext_filter_mask = 0; err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy); if (err < 0) @@ -1850,6 +1862,9 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) if (tb[IFLA_IFNAME]) nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ); + if (tb[IFLA_EXT_MASK]) + ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + ifm = nlmsg_data(nlh); if (ifm->ifi_index > 0) dev = __dev_get_by_index(net, ifm->ifi_index); @@ -1861,12 +1876,12 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) if (dev == NULL) return -ENODEV; - nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL); + nskb = nlmsg_new(if_nlmsg_size(dev, ext_filter_mask), GFP_KERNEL); if (nskb == NULL) return -ENOBUFS; err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid, - nlh->nlmsg_seq, 0, 0); + nlh->nlmsg_seq, 0, 0, ext_filter_mask); if (err < 0) { /* -EMSGSIZE implies BUG in if_nlmsg_size */ WARN_ON(err == -EMSGSIZE); @@ -1877,8 +1892,31 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) return err; } -static u16 rtnl_calcit(struct sk_buff *skb) +static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh) { + struct net *net = sock_net(skb->sk); + struct net_device *dev; + struct nlattr *tb[IFLA_MAX+1]; + u32 ext_filter_mask = 0; + u16 min_ifinfo_dump_size = 0; + + nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy); + + if (tb[IFLA_EXT_MASK]) + ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]); + + if (!ext_filter_mask) + return NLMSG_GOODSIZE; + /* + * traverse the list of net devices and compute the minimum + * buffer size based upon the filter mask. + */ + list_for_each_entry(dev, &net->dev_base_head, dev_list) { + min_ifinfo_dump_size = max_t(u16, min_ifinfo_dump_size, + if_nlmsg_size(dev, + ext_filter_mask)); + } + return min_ifinfo_dump_size; } @@ -1913,13 +1951,11 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change) int err = -ENOBUFS; size_t if_info_size; - skb = nlmsg_new((if_info_size = if_nlmsg_size(dev)), GFP_KERNEL); + skb = nlmsg_new((if_info_size = if_nlmsg_size(dev, 0)), GFP_KERNEL); if (skb == NULL) goto errout; - min_ifinfo_dump_size = max_t(u16, if_info_size, min_ifinfo_dump_size); - - err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0); + err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0, 0); if (err < 0) { /* -EMSGSIZE implies BUG in if_nlmsg_size() */ WARN_ON(err == -EMSGSIZE); @@ -1977,7 +2013,7 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) return -EOPNOTSUPP; calcit = rtnl_get_calcit(family, type); if (calcit) - min_dump_alloc = calcit(skb); + min_dump_alloc = calcit(skb, nlh); __rtnl_unlock(); rtnl = net->rtnl; diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 6b3ca5ba445..38673d2860e 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -65,7 +65,7 @@ it is infeasible task. The most general solutions would be to keep skb->encapsulation counter (sort of local ttl), and silently drop packet when it expires. It is a good - solution, but it supposes maintaing new variable in ALL + solution, but it supposes maintaining new variable in ALL skb, even if no tunneling is used. Current solution: xmit_recursion breaks dead loops. This is a percpu @@ -91,14 +91,14 @@ One of them is to parse packet trying to detect inner encapsulation made by our node. It is difficult or even impossible, especially, - taking into account fragmentation. TO be short, tt is not solution at all. + taking into account fragmentation. TO be short, ttl is not solution at all. Current solution: The solution was UNEXPECTEDLY SIMPLE. We force DF flag on tunnels with preconfigured hop limit, that is ALL. :-) Well, it does not remove the problem completely, but exponential growth of network traffic is changed to linear (branches, that exceed pmtu are pruned) and tunnel mtu - fastly degrades to value <68, where looping stops. + rapidly degrades to value <68, where looping stops. Yes, it is not good if there exists a router in the loop, which does not force DF, even when encapsulating packets have DF set. But it is not our problem! Nobody could accuse us, we made @@ -457,8 +457,8 @@ static void ipgre_err(struct sk_buff *skb, u32 info) GRE tunnels with enabled checksum. Tell them "thank you". Well, I wonder, rfc1812 was written by Cisco employee, - what the hell these idiots break standrads established - by themself??? + what the hell these idiots break standards established + by themselves??? */ const struct iphdr *iph = (const struct iphdr *)skb->data; diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index aea5a199c37..b072386cee2 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -630,6 +630,7 @@ static int ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num); + err = -EOPNOTSUPP; if (flags & MSG_OOB) goto out; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 37755ccc0e9..22ef5f9fd2f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3240,7 +3240,8 @@ void __init tcp_init(void) { struct sk_buff *skb = NULL; unsigned long limit; - int i, max_share, cnt; + int max_share, cnt; + unsigned int i; unsigned long jiffy = jiffies; BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb)); @@ -3283,7 +3284,7 @@ void __init tcp_init(void) &tcp_hashinfo.bhash_size, NULL, 64 * 1024); - tcp_hashinfo.bhash_size = 1 << tcp_hashinfo.bhash_size; + tcp_hashinfo.bhash_size = 1U << tcp_hashinfo.bhash_size; for (i = 0; i < tcp_hashinfo.bhash_size; i++) { spin_lock_init(&tcp_hashinfo.bhash[i].lock); INIT_HLIST_HEAD(&tcp_hashinfo.bhash[i].chain); diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c index 63418185f52..e3db3f91511 100644 --- a/net/ipv4/xfrm4_mode_beet.c +++ b/net/ipv4/xfrm4_mode_beet.c @@ -110,10 +110,7 @@ static int xfrm4_beet_input(struct xfrm_state *x, struct sk_buff *skb) skb_push(skb, sizeof(*iph)); skb_reset_network_header(skb); - - memmove(skb->data - skb->mac_len, skb_mac_header(skb), - skb->mac_len); - skb_set_mac_header(skb, -skb->mac_len); + skb_mac_header_rebuild(skb); xfrm4_beet_make_header(skb); diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index 534972e114a..ed4bf11ef9f 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -66,7 +66,6 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb) static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) { - const unsigned char *old_mac; int err = -EINVAL; if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP) @@ -84,10 +83,9 @@ static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) if (!(x->props.flags & XFRM_STATE_NOECN)) ipip_ecn_decapsulate(skb); - old_mac = skb_mac_header(skb); - skb_set_mac_header(skb, -skb->mac_len); - memmove(skb_mac_header(skb), old_mac, skb->mac_len); skb_reset_network_header(skb); + skb_mac_header_rebuild(skb); + err = 0; out: diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index c7e95c8c579..5aa3981a392 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -1926,8 +1926,10 @@ static int ip6mr_forward2(struct net *net, struct mr6_table *mrt, }; dst = ip6_route_output(net, NULL, &fl6); - if (!dst) + if (dst->error) { + dst_release(dst); goto out_free; + } skb_dst_drop(skb); skb_dst_set(skb, dst); diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index d8f02ef88e5..c964958ac47 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1545,9 +1545,10 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh, &saddr_buf, &ipv6_hdr(skb)->saddr, dev->ifindex); dst = ip6_route_output(net, NULL, &fl6); - if (dst == NULL) + if (dst->error) { + dst_release(dst); return; - + } dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0); if (IS_ERR(dst)) return; diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c index a81ce945075..9949a356d62 100644 --- a/net/ipv6/xfrm6_mode_beet.c +++ b/net/ipv6/xfrm6_mode_beet.c @@ -80,7 +80,6 @@ static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb) static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb) { struct ipv6hdr *ip6h; - const unsigned char *old_mac; int size = sizeof(struct ipv6hdr); int err; @@ -90,10 +89,7 @@ static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb) __skb_push(skb, size); skb_reset_network_header(skb); - - old_mac = skb_mac_header(skb); - skb_set_mac_header(skb, -skb->mac_len); - memmove(skb_mac_header(skb), old_mac, skb->mac_len); + skb_mac_header_rebuild(skb); xfrm6_beet_make_header(skb); diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c index 261e6e6f487..9f2095b19ad 100644 --- a/net/ipv6/xfrm6_mode_tunnel.c +++ b/net/ipv6/xfrm6_mode_tunnel.c @@ -63,7 +63,6 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb) static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) { int err = -EINVAL; - const unsigned char *old_mac; if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6) goto out; @@ -80,10 +79,9 @@ static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) if (!(x->props.flags & XFRM_STATE_NOECN)) ipip6_ecn_decapsulate(skb); - old_mac = skb_mac_header(skb); - skb_set_mac_header(skb, -skb->mac_len); - memmove(skb_mac_header(skb), old_mac, skb->mac_len); skb_reset_network_header(skb); + skb_mac_header_rebuild(skb); + err = 0; out: diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 2406b3e7393..d86217d56bd 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -63,14 +63,14 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : "" int res = scnprintf(buf, sizeof(buf), - "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", + "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s", TEST(AUTH), TEST(ASSOC), TEST(PS_STA), TEST(PS_DRIVER), TEST(AUTHORIZED), TEST(SHORT_PREAMBLE), TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT), TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL), TEST(UAPSD), TEST(SP), TEST(TDLS_PEER), - TEST(TDLS_PEER_AUTH)); + TEST(TDLS_PEER_AUTH), TEST(RATE_CONTROL)); #undef TEST return simple_read_from_buffer(userbuf, count, ppos, buf, res); } diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 5a5a7767d54..ad64f4d5271 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -336,7 +336,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, int i; u32 mask; - if (sta) { + if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) { ista = &sta->sta; priv_sta = sta->rate_ctrl_priv; } diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 168427b0ffd..80cfc006dd7 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -41,7 +41,7 @@ static inline void rate_control_tx_status(struct ieee80211_local *local, struct ieee80211_sta *ista = &sta->sta; void *priv_sta = sta->rate_ctrl_priv; - if (!ref) + if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) return; ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb); @@ -62,6 +62,7 @@ static inline void rate_control_rate_init(struct sta_info *sta) sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; ref->ops->rate_init(ref->priv, sband, ista, priv_sta); + set_sta_flag(sta, WLAN_STA_RATE_CONTROL); } static inline void rate_control_rate_update(struct ieee80211_local *local, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 6f77f12dc3f..bfed851d0d3 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -52,6 +52,7 @@ * @WLAN_STA_SP: Station is in a service period, so don't try to * reply to other uAPSD trigger frames or PS-Poll. * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame. + * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, @@ -71,6 +72,7 @@ enum ieee80211_sta_info_flags { WLAN_STA_UAPSD, WLAN_STA_SP, WLAN_STA_4ADDR_EVENT, + WLAN_STA_RATE_CONTROL, }; enum ieee80211_sta_state { diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 611c3359b94..2555816e778 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -232,6 +232,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc, __be16 dport = 0; /* destination port to forward */ unsigned int flags; struct ip_vs_conn_param param; + const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) }; union nf_inet_addr snet; /* source network of the client, after masking */ @@ -267,7 +268,6 @@ ip_vs_sched_persist(struct ip_vs_service *svc, { int protocol = iph.protocol; const union nf_inet_addr *vaddr = &iph.daddr; - const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) }; __be16 vport = 0; if (dst_port == svc->port) { diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 76613f5a55c..ed86a3be678 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -404,19 +404,49 @@ static void __nf_conntrack_hash_insert(struct nf_conn *ct, &net->ct.hash[repl_hash]); } -void nf_conntrack_hash_insert(struct nf_conn *ct) +int +nf_conntrack_hash_check_insert(struct nf_conn *ct) { struct net *net = nf_ct_net(ct); unsigned int hash, repl_hash; + struct nf_conntrack_tuple_hash *h; + struct hlist_nulls_node *n; u16 zone; zone = nf_ct_zone(ct); - hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); - repl_hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + hash = hash_conntrack(net, zone, + &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple); + repl_hash = hash_conntrack(net, zone, + &ct->tuplehash[IP_CT_DIR_REPLY].tuple); + + spin_lock_bh(&nf_conntrack_lock); + /* See if there's one in the list already, including reverse */ + hlist_nulls_for_each_entry(h, n, &net->ct.hash[hash], hnnode) + if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, + &h->tuple) && + zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h))) + goto out; + hlist_nulls_for_each_entry(h, n, &net->ct.hash[repl_hash], hnnode) + if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_REPLY].tuple, + &h->tuple) && + zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h))) + goto out; + + add_timer(&ct->timeout); + nf_conntrack_get(&ct->ct_general); __nf_conntrack_hash_insert(ct, hash, repl_hash); + NF_CT_STAT_INC(net, insert); + spin_unlock_bh(&nf_conntrack_lock); + + return 0; + +out: + NF_CT_STAT_INC(net, insert_failed); + spin_unlock_bh(&nf_conntrack_lock); + return -EEXIST; } -EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert); +EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert); /* Confirm a connection given skb; places it in hash table */ int diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 9307b033c0c..30c9d4ca021 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1367,15 +1367,12 @@ ctnetlink_create_conntrack(struct net *net, u16 zone, nf_ct_protonum(ct)); if (helper == NULL) { rcu_read_unlock(); - spin_unlock_bh(&nf_conntrack_lock); #ifdef CONFIG_MODULES if (request_module("nfct-helper-%s", helpname) < 0) { - spin_lock_bh(&nf_conntrack_lock); err = -EOPNOTSUPP; goto err1; } - spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); helper = __nf_conntrack_helper_find(helpname, nf_ct_l3num(ct), @@ -1468,8 +1465,10 @@ ctnetlink_create_conntrack(struct net *net, u16 zone, if (tstamp) tstamp->start = ktime_to_ns(ktime_get_real()); - add_timer(&ct->timeout); - nf_conntrack_hash_insert(ct); + err = nf_conntrack_hash_check_insert(ct); + if (err < 0) + goto err2; + rcu_read_unlock(); return ct; @@ -1490,6 +1489,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, struct nf_conntrack_tuple otuple, rtuple; struct nf_conntrack_tuple_hash *h = NULL; struct nfgenmsg *nfmsg = nlmsg_data(nlh); + struct nf_conn *ct; u_int8_t u3 = nfmsg->nfgen_family; u16 zone; int err; @@ -1510,27 +1510,22 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, return err; } - spin_lock_bh(&nf_conntrack_lock); if (cda[CTA_TUPLE_ORIG]) - h = __nf_conntrack_find(net, zone, &otuple); + h = nf_conntrack_find_get(net, zone, &otuple); else if (cda[CTA_TUPLE_REPLY]) - h = __nf_conntrack_find(net, zone, &rtuple); + h = nf_conntrack_find_get(net, zone, &rtuple); if (h == NULL) { err = -ENOENT; if (nlh->nlmsg_flags & NLM_F_CREATE) { - struct nf_conn *ct; enum ip_conntrack_events events; ct = ctnetlink_create_conntrack(net, zone, cda, &otuple, &rtuple, u3); - if (IS_ERR(ct)) { - err = PTR_ERR(ct); - goto out_unlock; - } + if (IS_ERR(ct)) + return PTR_ERR(ct); + err = 0; - nf_conntrack_get(&ct->ct_general); - spin_unlock_bh(&nf_conntrack_lock); if (test_bit(IPS_EXPECTED_BIT, &ct->status)) events = IPCT_RELATED; else @@ -1545,23 +1540,19 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, ct, NETLINK_CB(skb).pid, nlmsg_report(nlh)); nf_ct_put(ct); - } else - spin_unlock_bh(&nf_conntrack_lock); + } return err; } /* implicit 'else' */ - /* We manipulate the conntrack inside the global conntrack table lock, - * so there's no need to increase the refcount */ err = -EEXIST; + ct = nf_ct_tuplehash_to_ctrack(h); if (!(nlh->nlmsg_flags & NLM_F_EXCL)) { - struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h); - + spin_lock_bh(&nf_conntrack_lock); err = ctnetlink_change_conntrack(ct, cda); + spin_unlock_bh(&nf_conntrack_lock); if (err == 0) { - nf_conntrack_get(&ct->ct_general); - spin_unlock_bh(&nf_conntrack_lock); nf_conntrack_eventmask_report((1 << IPCT_REPLY) | (1 << IPCT_ASSURED) | (1 << IPCT_HELPER) | @@ -1570,15 +1561,10 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, (1 << IPCT_MARK), ct, NETLINK_CB(skb).pid, nlmsg_report(nlh)); - nf_ct_put(ct); - } else - spin_unlock_bh(&nf_conntrack_lock); - - return err; + } } -out_unlock: - spin_unlock_bh(&nf_conntrack_lock); + nf_ct_put(ct); return err; } diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c index b3a7db678b8..ce60cf0f6c1 100644 --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -203,6 +203,27 @@ err: return status; } +#ifdef CONFIG_BRIDGE_NETFILTER +/* When called from bridge netfilter, skb->data must point to MAC header + * before calling skb_gso_segment(). Else, original MAC header is lost + * and segmented skbs will be sent to wrong destination. + */ +static void nf_bridge_adjust_skb_data(struct sk_buff *skb) +{ + if (skb->nf_bridge) + __skb_push(skb, skb->network_header - skb->mac_header); +} + +static void nf_bridge_adjust_segmented_data(struct sk_buff *skb) +{ + if (skb->nf_bridge) + __skb_pull(skb, skb->network_header - skb->mac_header); +} +#else +#define nf_bridge_adjust_skb_data(s) do {} while (0) +#define nf_bridge_adjust_segmented_data(s) do {} while (0) +#endif + int nf_queue(struct sk_buff *skb, struct list_head *elem, u_int8_t pf, unsigned int hook, @@ -212,7 +233,7 @@ int nf_queue(struct sk_buff *skb, unsigned int queuenum) { struct sk_buff *segs; - int err; + int err = -EINVAL; unsigned int queued; if (!skb_is_gso(skb)) @@ -228,23 +249,25 @@ int nf_queue(struct sk_buff *skb, break; } + nf_bridge_adjust_skb_data(skb); segs = skb_gso_segment(skb, 0); /* Does not use PTR_ERR to limit the number of error codes that can be * returned by nf_queue. For instance, callers rely on -ECANCELED to mean * 'ignore this hook'. */ if (IS_ERR(segs)) - return -EINVAL; - + goto out_err; queued = 0; err = 0; do { struct sk_buff *nskb = segs->next; segs->next = NULL; - if (err == 0) + if (err == 0) { + nf_bridge_adjust_segmented_data(segs); err = __nf_queue(segs, elem, pf, hook, indev, outdev, okfn, queuenum); + } if (err == 0) queued++; else @@ -252,11 +275,12 @@ int nf_queue(struct sk_buff *skb, segs = nskb; } while (segs); - /* also free orig skb if only some segments were queued */ - if (unlikely(err && queued)) - err = 0; - if (err == 0) + if (queued) { kfree_skb(skb); + return 0; + } + out_err: + nf_bridge_adjust_segmented_data(skb); return err; } diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c index 3aae66facf9..4d505790283 100644 --- a/net/netfilter/xt_TEE.c +++ b/net/netfilter/xt_TEE.c @@ -152,9 +152,10 @@ tee_tg_route6(struct sk_buff *skb, const struct xt_tee_tginfo *info) fl6.flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) | (iph->flow_lbl[1] << 8) | iph->flow_lbl[2]; dst = ip6_route_output(net, NULL, &fl6); - if (dst == NULL) + if (dst->error) { + dst_release(dst); return false; - + } skb_dst_drop(skb); skb_dst_set(skb, dst); skb->dev = dst->dev; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index e83d61ca78c..5da548fa7ae 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -501,9 +501,8 @@ tfifo_dequeue: /* if more time remaining? */ if (cb->time_to_send <= psched_get_time()) { - skb = qdisc_dequeue_tail(sch); - if (unlikely(!skb)) - goto qdisc_dequeue; + __skb_unlink(skb, &sch->q); + sch->qstats.backlog -= qdisc_pkt_len(skb); #ifdef CONFIG_NET_CLS_ACT /* @@ -539,7 +538,6 @@ deliver: qdisc_watchdog_schedule(&q->watchdog, cb->time_to_send); } -qdisc_dequeue: if (q->qdisc) { skb = q->qdisc->ops->dequeue(q->qdisc); if (skb) diff --git a/scripts/coccicheck b/scripts/coccicheck index 3c2776466d8..823e972149e 100755 --- a/scripts/coccicheck +++ b/scripts/coccicheck @@ -9,15 +9,10 @@ if [ "$C" = "1" -o "$C" = "2" ]; then # FLAGS="-ignore_unknown_options -very_quiet" # OPTIONS=$* - if [ "$KBUILD_EXTMOD" = "" ] ; then - # Workaround for Coccinelle < 0.2.3 - FLAGS="-I $srctree/include -very_quiet" - shift $(( $# - 1 )) - OPTIONS=$1 - else - echo M= is not currently supported when C=1 or C=2 - exit 1 - fi +# Workaround for Coccinelle < 0.2.3 + FLAGS="-I $srctree/include -very_quiet" + shift $(( $# - 1 )) + OPTIONS=$1 else ONLINE=0 FLAGS="-very_quiet" diff --git a/scripts/depmod.sh b/scripts/depmod.sh index a2723568594..2ae48170314 100755 --- a/scripts/depmod.sh +++ b/scripts/depmod.sh @@ -9,12 +9,6 @@ fi DEPMOD=$1 KERNELRELEASE=$2 -if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then - echo "Warning: you may need to install module-init-tools" >&2 - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2 - sleep 1 -fi - if ! test -r System.map -a -x "$DEPMOD"; then exit 0 fi diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index d0de2a2c3a2..b89efe6e4c8 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -46,11 +46,37 @@ struct devtable { void *function; }; +#define ___cat(a,b) a ## b +#define __cat(a,b) ___cat(a,b) + +/* we need some special handling for this host tool running eventually on + * Darwin. The Mach-O section handling is a bit different than ELF section + * handling. The differnces in detail are: + * a) we have segments which have sections + * b) we need a API call to get the respective section symbols */ +#if defined(__MACH__) +#include <mach-o/getsect.h> + +#define INIT_SECTION(name) do { \ + unsigned long name ## _len; \ + char *__cat(pstart_,name) = getsectdata("__TEXT", \ + #name, &__cat(name,_len)); \ + char *__cat(pstop_,name) = __cat(pstart_,name) + \ + __cat(name, _len); \ + __cat(__start_,name) = (void *)__cat(pstart_,name); \ + __cat(__stop_,name) = (void *)__cat(pstop_,name); \ + } while (0) +#define SECTION(name) __attribute__((section("__TEXT, " #name))) + +struct devtable **__start___devtable, **__stop___devtable; +#else +#define INIT_SECTION(name) /* no-op for ELF */ +#define SECTION(name) __attribute__((section(#name))) + /* We construct a table of pointers in an ELF section (pointers generally * go unpadded by gcc). ld creates boundary syms for us. */ extern struct devtable *__start___devtable[], *__stop___devtable[]; -#define ___cat(a,b) a ## b -#define __cat(a,b) ___cat(a,b) +#endif /* __MACH__ */ #if __GNUC__ == 3 && __GNUC_MINOR__ < 3 # define __used __attribute__((__unused__)) @@ -65,8 +91,8 @@ extern struct devtable *__start___devtable[], *__stop___devtable[]; (type *)NULL, \ (char *)NULL)), \ sizeof(type), (function) }; \ - static struct devtable *__attribute__((section("__devtable"))) \ - __used __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__) + static struct devtable *SECTION(__devtable) __used \ + __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__) #define ADD(str, sep, cond, field) \ do { \ @@ -1080,6 +1106,7 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, do_pnp_card_entries(symval, sym->st_size, mod); else { struct devtable **p; + INIT_SECTION(__devtable); for (p = __start___devtable; p < __stop___devtable; p++) { if (sym_is(name, namelen, (*p)->device_id)) { diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 2bd594e6d1b..9adb667dd31 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1494,6 +1494,13 @@ static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) return 0; } +#ifndef R_ARM_CALL +#define R_ARM_CALL 28 +#endif +#ifndef R_ARM_JUMP24 +#define R_ARM_JUMP24 29 +#endif + static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) { unsigned int r_typ = ELF_R_TYPE(r->r_info); @@ -1505,6 +1512,8 @@ static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) (elf->symtab_start + ELF_R_SYM(r->r_info)); break; case R_ARM_PC24: + case R_ARM_CALL: + case R_ARM_JUMP24: /* From ARM ABI: ((S + A) | T) - P */ r->r_addend = (int)(long)(elf->hdr + sechdr->sh_offset + diff --git a/scripts/package/builddeb b/scripts/package/builddeb index f6cbc3ddb68..3c6c0b14c80 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -238,14 +238,14 @@ EOF fi # Build header package -(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$) -(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$) -(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$) +(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > "$objtree/debian/hdrsrcfiles") +(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> "$objtree/debian/hdrsrcfiles") +(cd $objtree; find .config Module.symvers include scripts -type f >> "$objtree/debian/hdrobjfiles") destdir=$kernel_headers_dir/usr/src/linux-headers-$version mkdir -p "$destdir" -(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -) -(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -) -rm -f /tmp/files$$ /tmp/objfiles$$ +(cd $srctree; tar -c -f - -T "$objtree/debian/hdrsrcfiles") | (cd $destdir; tar -xf -) +(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -) +rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles" arch=$(dpkg --print-architecture) cat <<EOF >> debian/control diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 95ffa6a9db6..496f14c1a73 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -2684,10 +2684,9 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); if (err < 0) goto out_err; + opl3->private_data = chip; } - opl3->private_data = chip; - sprintf(card->longname, "%s at 0x%lx, irq %i", card->shortname, chip->ctrl_io, chip->irq); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c2c65f63bf0..684307372d7 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1759,7 +1759,11 @@ static void put_vol_mute(struct hda_codec *codec, struct hda_amp_info *info, parm = ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT; parm |= direction == HDA_OUTPUT ? AC_AMP_SET_OUTPUT : AC_AMP_SET_INPUT; parm |= index << AC_AMP_SET_INDEX_SHIFT; - parm |= val; + if ((val & HDA_AMP_MUTE) && !(info->amp_caps & AC_AMPCAP_MUTE) && + (info->amp_caps & AC_AMPCAP_MIN_MUTE)) + ; /* set the zero value as a fake mute */ + else + parm |= val; snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, parm); info->vol[ch] = val; } @@ -2026,7 +2030,7 @@ int snd_hda_mixer_amp_tlv(struct snd_kcontrol *kcontrol, int op_flag, val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT); val1 += ofs; val1 = ((int)val1) * ((int)val2); - if (min_mute) + if (min_mute || (caps & AC_AMPCAP_MIN_MUTE)) val2 |= TLV_DB_SCALE_MUTE; if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv)) return -EFAULT; @@ -5114,7 +5118,7 @@ static int fill_audio_out_name(struct hda_codec *codec, hda_nid_t nid, const char *pfx = "", *sfx = ""; /* handle as a speaker if it's a fixed line-out */ - if (!strcmp(name, "Line-Out") && attr == INPUT_PIN_ATTR_INT) + if (!strcmp(name, "Line Out") && attr == INPUT_PIN_ATTR_INT) name = "Speaker"; /* check the location */ switch (attr) { @@ -5173,7 +5177,7 @@ int snd_hda_get_pin_label(struct hda_codec *codec, hda_nid_t nid, switch (get_defcfg_device(def_conf)) { case AC_JACK_LINE_OUT: - return fill_audio_out_name(codec, nid, cfg, "Line-Out", + return fill_audio_out_name(codec, nid, cfg, "Line Out", label, maxlen, indexp); case AC_JACK_SPEAKER: return fill_audio_out_name(codec, nid, cfg, "Speaker", diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index e9f71dc0d46..f0f1943a4b2 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -298,6 +298,9 @@ enum { #define AC_AMPCAP_MUTE (1<<31) /* mute capable */ #define AC_AMPCAP_MUTE_SHIFT 31 +/* driver-specific amp-caps: using bits 24-30 */ +#define AC_AMPCAP_MIN_MUTE (1 << 30) /* min-volume = mute */ + /* Connection list */ #define AC_CLIST_LENGTH (0x7f<<0) #define AC_CLIST_LONG (1<<7) diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index bc5a993d114..c83ccdba1e5 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -609,7 +609,7 @@ static int add_output(struct hda_codec *codec, hda_nid_t dac, int idx, "Front Speaker", "Surround Speaker", "Bass Speaker" }; static const char * const line_outs[] = { - "Front Line-Out", "Surround Line-Out", "Bass Line-Out" + "Front Line Out", "Surround Line Out", "Bass Line Out" }; fix_volume_caps(codec, dac); @@ -635,7 +635,7 @@ static int add_output(struct hda_codec *codec, hda_nid_t dac, int idx, if (num_ctls > 1) name = line_outs[idx]; else - name = "Line-Out"; + name = "Line Out"; break; } diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index a7a5733aa4d..d29d6d37790 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3482,7 +3482,7 @@ static int cx_automute_mode_info(struct snd_kcontrol *kcontrol, "Disabled", "Enabled" }; static const char * const texts3[] = { - "Disabled", "Speaker Only", "Line-Out+Speaker" + "Disabled", "Speaker Only", "Line Out+Speaker" }; const char * const *texts; @@ -4079,7 +4079,8 @@ static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename, err = snd_hda_ctl_add(codec, nid, kctl); if (err < 0) return err; - if (!(query_amp_caps(codec, nid, hda_dir) & AC_AMPCAP_MUTE)) + if (!(query_amp_caps(codec, nid, hda_dir) & + (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE))) break; } return 0; @@ -4379,6 +4380,22 @@ static const struct snd_pci_quirk cxt_fixups[] = { {} }; +/* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches + * can be created (bko#42825) + */ +static void add_cx5051_fake_mutes(struct hda_codec *codec) +{ + static hda_nid_t out_nids[] = { + 0x10, 0x11, 0 + }; + hda_nid_t *p; + + for (p = out_nids; *p; p++) + snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT, + AC_AMPCAP_MIN_MUTE | + query_amp_caps(codec, *p, HDA_OUTPUT)); +} + static int patch_conexant_auto(struct hda_codec *codec) { struct conexant_spec *spec; @@ -4397,6 +4414,9 @@ static int patch_conexant_auto(struct hda_codec *codec) case 0x14f15045: spec->single_adc_amp = 1; break; + case 0x14f15051: + add_cx5051_fake_mutes(codec); + break; } apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1358987c49d..f286bb8fda1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -80,6 +80,8 @@ enum { ALC_AUTOMUTE_MIXER, /* mute/unmute mixer widget AMP */ }; +#define MAX_VOL_NIDS 0x40 + struct alc_spec { /* codec parameterization */ const struct snd_kcontrol_new *mixers[5]; /* mixer arrays */ @@ -118,8 +120,8 @@ struct alc_spec { const hda_nid_t *capsrc_nids; hda_nid_t dig_in_nid; /* digital-in NID; optional */ hda_nid_t mixer_nid; /* analog-mixer NID */ - DECLARE_BITMAP(vol_ctls, 0x20 << 1); - DECLARE_BITMAP(sw_ctls, 0x20 << 1); + DECLARE_BITMAP(vol_ctls, MAX_VOL_NIDS << 1); + DECLARE_BITMAP(sw_ctls, MAX_VOL_NIDS << 1); /* capture setup for dynamic dual-adc switch */ hda_nid_t cur_adc; @@ -800,7 +802,7 @@ static int alc_automute_mode_info(struct snd_kcontrol *kcontrol, "Disabled", "Enabled" }; static const char * const texts3[] = { - "Disabled", "Speaker Only", "Line-Out+Speaker" + "Disabled", "Speaker Only", "Line Out+Speaker" }; const char * const *texts; @@ -1854,7 +1856,7 @@ static const char * const alc_slave_vols[] = { "Headphone Playback Volume", "Speaker Playback Volume", "Mono Playback Volume", - "Line-Out Playback Volume", + "Line Out Playback Volume", "CLFE Playback Volume", "Bass Speaker Playback Volume", "PCM Playback Volume", @@ -1871,7 +1873,7 @@ static const char * const alc_slave_sws[] = { "Speaker Playback Switch", "Mono Playback Switch", "IEC958 Playback Switch", - "Line-Out Playback Switch", + "Line Out Playback Switch", "CLFE Playback Switch", "Bass Speaker Playback Switch", "PCM Playback Switch", @@ -3149,7 +3151,10 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) static inline unsigned int get_ctl_pos(unsigned int data) { hda_nid_t nid = get_amp_nid_(data); - unsigned int dir = get_amp_direction_(data); + unsigned int dir; + if (snd_BUG_ON(nid >= MAX_VOL_NIDS)) + return 0; + dir = get_amp_direction_(data); return (nid << 1) | dir; } @@ -3792,7 +3797,7 @@ static void alc_auto_init_input_src(struct hda_codec *codec) else nums = spec->num_adc_nids; for (c = 0; c < nums; c++) - alc_mux_select(codec, 0, spec->cur_mux[c], true); + alc_mux_select(codec, c, spec->cur_mux[c], true); } /* add mic boosts if needed */ @@ -4436,12 +4441,20 @@ static void alc889_fixup_dac_route(struct hda_codec *codec, const struct alc_fixup *fix, int action) { if (action == ALC_FIXUP_ACT_PRE_PROBE) { + /* fake the connections during parsing the tree */ hda_nid_t conn1[2] = { 0x0c, 0x0d }; hda_nid_t conn2[2] = { 0x0e, 0x0f }; snd_hda_override_conn_list(codec, 0x14, 2, conn1); snd_hda_override_conn_list(codec, 0x15, 2, conn1); snd_hda_override_conn_list(codec, 0x18, 2, conn2); snd_hda_override_conn_list(codec, 0x1a, 2, conn2); + } else if (action == ALC_FIXUP_ACT_PROBE) { + /* restore the connections */ + hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 }; + snd_hda_override_conn_list(codec, 0x14, 5, conn); + snd_hda_override_conn_list(codec, 0x15, 5, conn); + snd_hda_override_conn_list(codec, 0x18, 5, conn); + snd_hda_override_conn_list(codec, 0x1a, 5, conn); } } diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 6345df131a0..9dbb5735d77 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4629,7 +4629,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec) unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN; if (no_hp_sensing(spec, i)) continue; - if (presence) + if (1 /*presence*/) stac92xx_set_pinctl(codec, cfg->hp_pins[i], val); #if 0 /* FIXME */ /* Resetting the pinctl like below may lead to (a sort of) regressions diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 5ef70b5d27e..278c0a0575f 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -146,13 +146,10 @@ static const struct snd_kcontrol_new ak4642_snd_controls[] = { SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC, 0, 0xFF, 1, out_tlv), - - SOC_SINGLE("Headphone Switch", PW_MGMT2, 6, 1, 0), }; -static const struct snd_kcontrol_new ak4642_hpout_mixer_controls[] = { - SOC_DAPM_SINGLE("DACH", MD_CTL4, 0, 1, 0), -}; +static const struct snd_kcontrol_new ak4642_headphone_control = + SOC_DAPM_SINGLE("Switch", PW_MGMT2, 6, 1, 0); static const struct snd_kcontrol_new ak4642_lout_mixer_controls[] = { SOC_DAPM_SINGLE("DACL", SG_SL1, 4, 1, 0), @@ -165,13 +162,12 @@ static const struct snd_soc_dapm_widget ak4642_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("HPOUTR"), SND_SOC_DAPM_OUTPUT("LINEOUT"), - SND_SOC_DAPM_MIXER("HPOUTL Mixer", PW_MGMT2, 5, 0, - &ak4642_hpout_mixer_controls[0], - ARRAY_SIZE(ak4642_hpout_mixer_controls)), + SND_SOC_DAPM_PGA("HPL Out", PW_MGMT2, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("HPR Out", PW_MGMT2, 4, 0, NULL, 0), + SND_SOC_DAPM_SWITCH("Headphone Enable", SND_SOC_NOPM, 0, 0, + &ak4642_headphone_control), - SND_SOC_DAPM_MIXER("HPOUTR Mixer", PW_MGMT2, 4, 0, - &ak4642_hpout_mixer_controls[0], - ARRAY_SIZE(ak4642_hpout_mixer_controls)), + SND_SOC_DAPM_PGA("DACH", MD_CTL4, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("LINEOUT Mixer", PW_MGMT1, 3, 0, &ak4642_lout_mixer_controls[0], @@ -184,12 +180,17 @@ static const struct snd_soc_dapm_widget ak4642_dapm_widgets[] = { static const struct snd_soc_dapm_route ak4642_intercon[] = { /* Outputs */ - {"HPOUTL", NULL, "HPOUTL Mixer"}, - {"HPOUTR", NULL, "HPOUTR Mixer"}, + {"HPOUTL", NULL, "HPL Out"}, + {"HPOUTR", NULL, "HPR Out"}, {"LINEOUT", NULL, "LINEOUT Mixer"}, - {"HPOUTL Mixer", "DACH", "DAC"}, - {"HPOUTR Mixer", "DACH", "DAC"}, + {"HPL Out", NULL, "Headphone Enable"}, + {"HPR Out", NULL, "Headphone Enable"}, + + {"Headphone Enable", "Switch", "DACH"}, + + {"DACH", NULL, "DAC"}, + {"LINEOUT Mixer", "DACL", "DAC"}, }; diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 29c4b02c479..0ac228b7dc0 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2564,7 +2564,7 @@ static int dsp2_event(struct snd_soc_dapm_widget *w, return 0; } -static const char *st_text[] = { "None", "Right", "Left" }; +static const char *st_text[] = { "None", "Left", "Right" }; static const struct soc_enum str_enum = SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text); diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index 01d1f749cf0..b6adbed6e50 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -112,7 +112,7 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) break; case SND_SOC_DAIFMT_DSP_A: /* data on rising edge of bclk, frame high 1clk before data */ - strcr |= SSI_STCR_TFSL | SSI_STCR_TEFS; + strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS; break; } diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 1f55ded4047..1315663c1c0 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3068,9 +3068,13 @@ static void soc_dapm_shutdown_codec(struct snd_soc_dapm_context *dapm) * standby. */ if (powerdown) { - snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_PREPARE); + if (dapm->bias_level == SND_SOC_BIAS_ON) + snd_soc_dapm_set_bias_level(dapm, + SND_SOC_BIAS_PREPARE); dapm_seq_run(dapm, &down_list, 0, false); - snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_STANDBY); + if (dapm->bias_level == SND_SOC_BIAS_PREPARE) + snd_soc_dapm_set_bias_level(dapm, + SND_SOC_BIAS_STANDBY); } } @@ -3083,7 +3087,9 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card) list_for_each_entry(codec, &card->codec_dev_list, list) { soc_dapm_shutdown_codec(&codec->dapm); - snd_soc_dapm_set_bias_level(&codec->dapm, SND_SOC_BIAS_OFF); + if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) + snd_soc_dapm_set_bias_level(&codec->dapm, + SND_SOC_BIAS_OFF); } } diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 2cf87f5afed..fde9a7a29cb 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -311,8 +311,10 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) spin_lock(&dev->spinlock); - if (dev->input_panic || dev->output_panic) + if (dev->input_panic || dev->output_panic) { ptr = SNDRV_PCM_POS_XRUN; + goto unlock; + } if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ptr = bytes_to_frames(sub->runtime, @@ -321,6 +323,7 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) ptr = bytes_to_frames(sub->runtime, dev->audio_in_buf_pos[index]); +unlock: spin_unlock(&dev->spinlock); return ptr; } diff --git a/sound/usb/card.h b/sound/usb/card.h index a39edcc32a9..da5fa1ac4ed 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -1,6 +1,7 @@ #ifndef __USBAUDIO_CARD_H #define __USBAUDIO_CARD_H +#define MAX_NR_RATES 1024 #define MAX_PACKS 20 #define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */ #define MAX_URBS 8 diff --git a/sound/usb/format.c b/sound/usb/format.c index e09aba19375..ddfef57c4c9 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -209,8 +209,6 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof return 0; } -#define MAX_UAC2_NR_RATES 1024 - /* * Helper function to walk the array of sample rate triplets reported by * the device. The problem is that we need to parse whole array first to @@ -255,7 +253,7 @@ static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets, fp->rates |= snd_pcm_rate_to_rate_bit(rate); nr_rates++; - if (nr_rates >= MAX_UAC2_NR_RATES) { + if (nr_rates >= MAX_NR_RATES) { snd_printk(KERN_ERR "invalid uac2 rates\n"); break; } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index a3ddac0deff..27817266867 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -132,10 +132,14 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip, unsigned *rate_table = NULL; fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); - if (! fp) { + if (!fp) { snd_printk(KERN_ERR "cannot memdup\n"); return -ENOMEM; } + if (fp->nr_rates > MAX_NR_RATES) { + kfree(fp); + return -EINVAL; + } if (fp->nr_rates > 0) { rate_table = kmemdup(fp->rate_table, sizeof(int) * fp->nr_rates, GFP_KERNEL); diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 2044324b755..2a6f33cd888 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -74,6 +74,7 @@ static pid_t perf_event__get_comm_tgid(pid_t pid, char *comm, size_t len) if (size >= len) size = len - 1; memcpy(comm, name, size); + comm[size] = '\0'; } else if (memcmp(bf, "Tgid:", 5) == 0) { char *tgids = bf + 5; diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 3f16e08a5c8..ea32a061f1c 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -349,6 +349,10 @@ struct perf_evsel *perf_evlist__id2evsel(struct perf_evlist *evlist, u64 id) hlist_for_each_entry(sid, pos, head, node) if (sid->id == id) return sid->evsel; + + if (!perf_evlist__sample_id_all(evlist)) + return list_entry(evlist->entries.next, struct perf_evsel, node); + return NULL; } diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 29cb6545981..e33554a562b 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -1867,6 +1867,12 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev, tev->point.symbol); ret = -ENOENT; goto error; + } else if (tev->point.offset > sym->end - sym->start) { + pr_warning("Offset specified is greater than size of %s\n", + tev->point.symbol); + ret = -ENOENT; + goto error; + } return 1; diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 5d732621a46..74bd2e63c4b 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -672,7 +672,7 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr, bool retprobe, struct probe_trace_point *tp) { - Dwarf_Addr eaddr; + Dwarf_Addr eaddr, highaddr; const char *name; /* Copy the name of probe point */ @@ -683,6 +683,16 @@ static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr, dwarf_diename(sp_die)); return -ENOENT; } + if (dwarf_highpc(sp_die, &highaddr) != 0) { + pr_warning("Failed to get end address of %s\n", + dwarf_diename(sp_die)); + return -ENOENT; + } + if (paddr > highaddr) { + pr_warning("Offset specified is greater than size of %s\n", + dwarf_diename(sp_die)); + return -EINVAL; + } tp->symbol = strdup(name); if (tp->symbol == NULL) return -ENOMEM; diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 62a134dc421..9507c4b251a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -3244,9 +3244,11 @@ sub make_min_config { $in_bisect = 1; my $failed = 0; - build "oldconfig"; - start_monitor_and_boot or $failed = 1; - end_monitor; + build "oldconfig" or $failed = 1; + if (!$failed) { + start_monitor_and_boot or $failed = 1; + end_monitor; + } $in_bisect = 0; |