diff options
22 files changed, 1966 insertions, 176 deletions
diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.txt new file mode 100644 index 00000000000..f9b56b72b78 --- /dev/null +++ b/Documentation/power/regulator/design.txt @@ -0,0 +1,33 @@ +Regulator API design notes +========================== + +This document provides a brief, partially structured, overview of some +of the design considerations which impact the regulator API design. + +Safety +------ + + - Errors in regulator configuration can have very serious consequences + for the system, potentially including lasting hardware damage. + - It is not possible to automatically determine the power confugration + of the system - software-equivalent variants of the same chip may + have different power requirments, and not all components with power + requirements are visible to software. + + => The API should make no changes to the hardware state unless it has + specific knowledge that these changes are safe to do perform on + this particular system. + +Consumer use cases +------------------ + + - The overwhelming majority of devices in a system will have no + requirement to do any runtime configuration of their power beyond + being able to turn it on or off. + + - Many of the power supplies in the system will be shared between many + different consumers. + + => The consumer API should be structured so that these use cases are + very easy to handle and so that consumers will work with shared + supplies without any additional effort. diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index ce3487d99ab..63728fed620 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -87,7 +87,7 @@ static struct platform_device regulator_devices[] = { }, }; /* register regulator 1 device */ -platform_device_register(&wm8350_regulator_devices[0]); +platform_device_register(®ulator_devices[0]); /* register regulator 2 device */ -platform_device_register(&wm8350_regulator_devices[1]); +platform_device_register(®ulator_devices[1]); diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index 0cded696ca0..ffd185bb605 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -29,7 +29,7 @@ Some terms used in this document:- o PMIC - Power Management IC. An IC that contains numerous regulators - and often contains other susbsystems. + and often contains other subsystems. o Consumer - Electronic device that is supplied power by a regulator. @@ -168,4 +168,4 @@ relevant to non SoC devices and is split into the following four interfaces:- userspace via sysfs. This could be used to help monitor device power consumption and status. - See Documentation/ABI/testing/regulator-sysfs.txt + See Documentation/ABI/testing/sysfs-class-regulator diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt index 4200accb9bb..3f8b528f237 100644 --- a/Documentation/power/regulator/regulator.txt +++ b/Documentation/power/regulator/regulator.txt @@ -10,8 +10,9 @@ Registration Drivers can register a regulator by calling :- -struct regulator_dev *regulator_register(struct device *dev, - struct regulator_desc *regulator_desc); +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + struct device *dev, struct regulator_init_data *init_data, + void *driver_data); This will register the regulators capabilities and operations to the regulator core. diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 2dc42bbf6fe..bcbb161bde0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1,6 +1,5 @@ menuconfig REGULATOR bool "Voltage and Current Regulator Support" - default n help Generic Voltage and Current Regulator support. @@ -30,7 +29,6 @@ config REGULATOR_DEBUG config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" - default n help This driver provides support for fixed voltage regulators, useful for systems which use a combination of software @@ -38,7 +36,6 @@ config REGULATOR_FIXED_VOLTAGE config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" - default n help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for @@ -49,17 +46,15 @@ config REGULATOR_VIRTUAL_CONSUMER config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" - default n help There are some classes of devices that are controlled entirely - from user space. Usersapce consumer driver provides ability to + from user space. Userspace consumer driver provides ability to control power supplies for such devices. If unsure, say no. config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" - default n help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable @@ -69,7 +64,6 @@ config REGULATOR_BQ24022 config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" depends on I2C - default n help This driver controls a Maxim 1586 or 1587 voltage output regulator via I2C bus. The provided regulator is suitable @@ -147,5 +141,21 @@ config REGULATOR_AB3100 AB3100 analog baseband dealing with power regulators for the system. +config REGULATOR_TPS65023 + tristate "TI TPS65023 Power regulators" + depends on I2C + help + This driver supports TPS65023 voltage regulator chips. TPS65023 provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + +config REGULATOR_TPS6507X + tristate "TI TPS6507X Power regulators" + depends on I2C + help + This driver supports TPS6507X voltage regulator chips. TPS6507X provides + three step-down converters and two general-purpose LDO voltage regulators. + It supports TI's software based Class-2 SmartReflex implementation. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 768b3316d6e..4257a868377 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -23,4 +23,7 @@ obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o +obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o +obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 91ba9bfaa70..744ea1d0b59 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -37,7 +37,7 @@ static int has_full_constraints; */ struct regulator_map { struct list_head list; - struct device *dev; + const char *dev_name; /* The dev_name() for the consumer */ const char *supply; struct regulator_dev *regulator; }; @@ -232,7 +232,7 @@ static ssize_t regulator_name_show(struct device *dev, struct regulator_dev *rdev = dev_get_drvdata(dev); const char *name; - if (rdev->constraints->name) + if (rdev->constraints && rdev->constraints->name) name = rdev->constraints->name; else if (rdev->desc->name) name = rdev->desc->name; @@ -280,8 +280,13 @@ static ssize_t regulator_state_show(struct device *dev, struct device_attribute *attr, char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); + ssize_t ret; + + mutex_lock(&rdev->mutex); + ret = regulator_print_state(buf, _regulator_is_enabled(rdev)); + mutex_unlock(&rdev->mutex); - return regulator_print_state(buf, _regulator_is_enabled(rdev)); + return ret; } static DEVICE_ATTR(state, 0444, regulator_state_show, NULL); @@ -857,23 +862,39 @@ out: * set_consumer_device_supply: Bind a regulator to a symbolic supply * @rdev: regulator source * @consumer_dev: device the supply applies to + * @consumer_dev_name: dev_name() string for device supply applies to * @supply: symbolic name for supply * * Allows platform initialisation code to map physical regulator * sources to symbolic names for supplies for use by devices. Devices * should use these symbolic names to request regulators, avoiding the * need to provide board-specific regulator names as platform data. + * + * Only one of consumer_dev and consumer_dev_name may be specified. */ static int set_consumer_device_supply(struct regulator_dev *rdev, - struct device *consumer_dev, const char *supply) + struct device *consumer_dev, const char *consumer_dev_name, + const char *supply) { struct regulator_map *node; + int has_dev; + + if (consumer_dev && consumer_dev_name) + return -EINVAL; + + if (!consumer_dev_name && consumer_dev) + consumer_dev_name = dev_name(consumer_dev); if (supply == NULL) return -EINVAL; + if (consumer_dev_name != NULL) + has_dev = 1; + else + has_dev = 0; + list_for_each_entry(node, ®ulator_map_list, list) { - if (consumer_dev != node->dev) + if (consumer_dev_name != node->dev_name) continue; if (strcmp(node->supply, supply) != 0) continue; @@ -886,30 +907,45 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, return -EBUSY; } - node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); if (node == NULL) return -ENOMEM; node->regulator = rdev; - node->dev = consumer_dev; node->supply = supply; + if (has_dev) { + node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); + if (node->dev_name == NULL) { + kfree(node); + return -ENOMEM; + } + } + list_add(&node->list, ®ulator_map_list); return 0; } static void unset_consumer_device_supply(struct regulator_dev *rdev, - struct device *consumer_dev) + const char *consumer_dev_name, struct device *consumer_dev) { struct regulator_map *node, *n; + if (consumer_dev && !consumer_dev_name) + consumer_dev_name = dev_name(consumer_dev); + list_for_each_entry_safe(node, n, ®ulator_map_list, list) { - if (rdev == node->regulator && - consumer_dev == node->dev) { - list_del(&node->list); - kfree(node); - return; - } + if (rdev != node->regulator) + continue; + + if (consumer_dev_name && node->dev_name && + strcmp(consumer_dev_name, node->dev_name)) + continue; + + list_del(&node->list); + kfree(node->dev_name); + kfree(node); + return; } } @@ -920,6 +956,7 @@ static void unset_regulator_supplies(struct regulator_dev *rdev) list_for_each_entry_safe(node, n, ®ulator_map_list, list) { if (rdev == node->regulator) { list_del(&node->list); + kfree(node->dev_name); kfree(node); return; } @@ -1001,35 +1038,33 @@ overflow_err: return NULL; } -/** - * regulator_get - lookup and obtain a reference to a regulator. - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. - * - * Returns a struct regulator corresponding to the regulator producer, - * or IS_ERR() condition containing errno. - * - * Use of supply names configured via regulator_set_device_supply() is - * strongly encouraged. It is recommended that the supply name used - * should match the name used for the supply and/or the relevant - * device pins in the datasheet. - */ -struct regulator *regulator_get(struct device *dev, const char *id) +/* Internal regulator request function */ +static struct regulator *_regulator_get(struct device *dev, const char *id, + int exclusive) { struct regulator_dev *rdev; struct regulator_map *map; struct regulator *regulator = ERR_PTR(-ENODEV); + const char *devname = NULL; + int ret; if (id == NULL) { printk(KERN_ERR "regulator: get() with no identifier\n"); return regulator; } + if (dev) + devname = dev_name(dev); + mutex_lock(®ulator_list_mutex); list_for_each_entry(map, ®ulator_map_list, list) { - if (dev == map->dev && - strcmp(map->supply, id) == 0) { + /* If the mapping has a device set up it must match */ + if (map->dev_name && + (!devname || strcmp(map->dev_name, devname))) + continue; + + if (strcmp(map->supply, id) == 0) { rdev = map->regulator; goto found; } @@ -1038,6 +1073,16 @@ struct regulator *regulator_get(struct device *dev, const char *id) return regulator; found: + if (rdev->exclusive) { + regulator = ERR_PTR(-EPERM); + goto out; + } + + if (exclusive && rdev->open_count) { + regulator = ERR_PTR(-EBUSY); + goto out; + } + if (!try_module_get(rdev->owner)) goto out; @@ -1047,13 +1092,70 @@ found: module_put(rdev->owner); } + rdev->open_count++; + if (exclusive) { + rdev->exclusive = 1; + + ret = _regulator_is_enabled(rdev); + if (ret > 0) + rdev->use_count = 1; + else + rdev->use_count = 0; + } + out: mutex_unlock(®ulator_list_mutex); + return regulator; } + +/** + * regulator_get - lookup and obtain a reference to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. + * + * Use of supply names configured via regulator_set_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. + */ +struct regulator *regulator_get(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, 0); +} EXPORT_SYMBOL_GPL(regulator_get); /** + * regulator_get_exclusive - obtain exclusive access to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. Other consumers will be + * unable to obtain this reference is held and the use count for the + * regulator will be initialised to reflect the current state of the + * regulator. + * + * This is intended for use by consumers which cannot tolerate shared + * use of the regulator such as those which need to force the + * regulator off for correct operation of the hardware they are + * controlling. + * + * Use of supply names configured via regulator_set_device_supply() is + * strongly encouraged. It is recommended that the supply name used + * should match the name used for the supply and/or the relevant + * device pins in the datasheet. + */ +struct regulator *regulator_get_exclusive(struct device *dev, const char *id) +{ + return _regulator_get(dev, id, 1); +} +EXPORT_SYMBOL_GPL(regulator_get_exclusive); + +/** * regulator_put - "free" the regulator source * @regulator: regulator source * @@ -1081,21 +1183,29 @@ void regulator_put(struct regulator *regulator) list_del(®ulator->list); kfree(regulator); + rdev->open_count--; + rdev->exclusive = 0; + module_put(rdev->owner); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_put); +static int _regulator_can_change_status(struct regulator_dev *rdev) +{ + if (!rdev->constraints) + return 0; + + if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS) + return 1; + else + return 0; +} + /* locks held by regulator_enable() */ static int _regulator_enable(struct regulator_dev *rdev) { - int ret = -EINVAL; - - if (!rdev->constraints) { - printk(KERN_ERR "%s: %s has no constraints\n", - __func__, rdev->desc->name); - return ret; - } + int ret; /* do we need to enable the supply regulator first */ if (rdev->supply) { @@ -1108,24 +1218,35 @@ static int _regulator_enable(struct regulator_dev *rdev) } /* check voltage and requested load before enabling */ - if (rdev->desc->ops->enable) { - - if (rdev->constraints && - (rdev->constraints->valid_ops_mask & - REGULATOR_CHANGE_DRMS)) - drms_uA_update(rdev); - - ret = rdev->desc->ops->enable(rdev); - if (ret < 0) { - printk(KERN_ERR "%s: failed to enable %s: %d\n", + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) + drms_uA_update(rdev); + + if (rdev->use_count == 0) { + /* The regulator may on if it's not switchable or left on */ + ret = _regulator_is_enabled(rdev); + if (ret == -EINVAL || ret == 0) { + if (!_regulator_can_change_status(rdev)) + return -EPERM; + + if (rdev->desc->ops->enable) { + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) + return ret; + } else { + return -EINVAL; + } + } else if (ret < 0) { + printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", __func__, rdev->desc->name, ret); return ret; } - rdev->use_count++; - return ret; + /* Fallthrough on positive return values - already enabled */ } - return ret; + rdev->use_count++; + + return 0; } /** @@ -1165,7 +1286,8 @@ static int _regulator_disable(struct regulator_dev *rdev) if (rdev->use_count == 1 && !rdev->constraints->always_on) { /* we are last user */ - if (rdev->desc->ops->disable) { + if (_regulator_can_change_status(rdev) && + rdev->desc->ops->disable) { ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to disable %s\n", @@ -1265,20 +1387,11 @@ EXPORT_SYMBOL_GPL(regulator_force_disable); static int _regulator_is_enabled(struct regulator_dev *rdev) { - int ret; - - mutex_lock(&rdev->mutex); - /* sanity check */ - if (!rdev->desc->ops->is_enabled) { - ret = -EINVAL; - goto out; - } + if (!rdev->desc->ops->is_enabled) + return -EINVAL; - ret = rdev->desc->ops->is_enabled(rdev); -out: - mutex_unlock(&rdev->mutex); - return ret; + return rdev->desc->ops->is_enabled(rdev); } /** @@ -1295,7 +1408,13 @@ out: */ int regulator_is_enabled(struct regulator *regulator) { - return _regulator_is_enabled(regulator->rdev); + int ret; + + mutex_lock(®ulator->rdev->mutex); + ret = _regulator_is_enabled(regulator->rdev); + mutex_unlock(®ulator->rdev->mutex); + + return ret; } EXPORT_SYMBOL_GPL(regulator_is_enabled); @@ -1350,6 +1469,35 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector) EXPORT_SYMBOL_GPL(regulator_list_voltage); /** + * regulator_is_supported_voltage - check if a voltage range can be supported + * + * @regulator: Regulator to check. + * @min_uV: Minimum required voltage in uV. + * @max_uV: Maximum required voltage in uV. + * + * Returns a boolean or a negative error code. + */ +int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ + int i, voltages, ret; + + ret = regulator_count_voltages(regulator); + if (ret < 0) + return ret; + voltages = ret; + + for (i = 0; i < voltages; i++) { + ret = regulator_list_voltage(regulator, i); + + if (ret >= min_uV && ret <= max_uV) + return 1; + } + + return 0; +} + +/** * regulator_set_voltage - set regulator output voltage * @regulator: regulator source * @min_uV: Minimum required voltage in uV @@ -2091,11 +2239,13 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, for (i = 0; i < init_data->num_consumer_supplies; i++) { ret = set_consumer_device_supply(rdev, init_data->consumer_supplies[i].dev, + init_data->consumer_supplies[i].dev_name, init_data->consumer_supplies[i].supply); if (ret < 0) { for (--i; i >= 0; i--) unset_consumer_device_supply(rdev, - init_data->consumer_supplies[i].dev); + init_data->consumer_supplies[i].dev_name, + init_data->consumer_supplies[i].dev); goto scrub; } } @@ -2130,6 +2280,7 @@ void regulator_unregister(struct regulator_dev *rdev) return; mutex_lock(®ulator_list_mutex); + WARN_ON(rdev->open_count); unset_regulator_supplies(rdev); list_del(&rdev->list); if (rdev->supply) @@ -2277,14 +2428,14 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (c->name) + if (c && c->name) name = c->name; else if (rdev->desc->name) name = rdev->desc->name; else name = "regulator"; - if (!ops->disable || c->always_on) + if (!ops->disable || (c && c->always_on)) continue; mutex_lock(&rdev->mutex); diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index b8b89ef10a8..aa224d936e0 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -64,6 +64,14 @@ #define DA9034_MDTV2 (0x33) #define DA9034_MVRC (0x34) +/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */ +#define DA9035_OVER3 (0x12) +#define DA9035_VCC2 (0x1f) +#define DA9035_3DTV1 (0x2c) +#define DA9035_3DTV2 (0x2d) +#define DA9035_3VRC (0x2e) +#define DA9035_AUTOSKIP (0x2f) + struct da903x_regulator_info { struct regulator_desc desc; @@ -79,6 +87,10 @@ struct da903x_regulator_info { int enable_bit; }; +static int da9034_ldo12_data[] = { 1700, 1750, 1800, 1850, 1900, 1950, + 2000, 2050, 2700, 2750, 2800, 2850, + 2900, 2950, 3000, 3050 }; + static inline struct device *to_da903x_dev(struct regulator_dev *rdev) { return rdev_get_dev(rdev)->parent->parent; @@ -162,6 +174,17 @@ static int da903x_is_enabled(struct regulator_dev *rdev) return !!(reg_val & (1 << info->enable_bit)); } +static int da903x_list_voltage(struct regulator_dev *rdev, unsigned selector) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + ret = info->min_uV + info->step_uV * selector; + if (ret > info->max_uV) + return -EINVAL; + return ret; +} + /* DA9030 specific operations */ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) @@ -278,7 +301,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, } val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; - val = (val > 7 || val < 20) ? 8 : val - 12; + val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val); val <<= info->vol_shift; mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; @@ -305,9 +328,18 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) return info->min_uV + info->step_uV * val; } +static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + if (selector > ARRAY_SIZE(da9034_ldo12_data)) + return -EINVAL; + return da9034_ldo12_data[selector] * 1000; +} + static struct regulator_ops da903x_regulator_ldo_ops = { .set_voltage = da903x_set_ldo_voltage, .get_voltage = da903x_get_voltage, + .list_voltage = da903x_list_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -317,6 +349,7 @@ static struct regulator_ops da903x_regulator_ldo_ops = { static struct regulator_ops da9030_regulator_ldo14_ops = { .set_voltage = da9030_set_ldo14_voltage, .get_voltage = da9030_get_ldo14_voltage, + .list_voltage = da903x_list_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -326,6 +359,7 @@ static struct regulator_ops da9030_regulator_ldo14_ops = { static struct regulator_ops da9030_regulator_ldo1_15_ops = { .set_voltage = da9030_set_ldo1_15_voltage, .get_voltage = da903x_get_voltage, + .list_voltage = da903x_list_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -334,6 +368,7 @@ static struct regulator_ops da9030_regulator_ldo1_15_ops = { static struct regulator_ops da9034_regulator_dvc_ops = { .set_voltage = da9034_set_dvc_voltage, .get_voltage = da903x_get_voltage, + .list_voltage = da903x_list_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -343,6 +378,7 @@ static struct regulator_ops da9034_regulator_dvc_ops = { static struct regulator_ops da9034_regulator_ldo12_ops = { .set_voltage = da9034_set_ldo12_voltage, .get_voltage = da9034_get_ldo12_voltage, + .list_voltage = da9034_list_ldo12_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -355,6 +391,7 @@ static struct regulator_ops da9034_regulator_ldo12_ops = { .ops = &da903x_regulator_ldo_ops, \ .type = REGULATOR_VOLTAGE, \ .id = _pmic##_ID_LDO##_id, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ .owner = THIS_MODULE, \ }, \ .min_uV = (min) * 1000, \ @@ -367,24 +404,25 @@ static struct regulator_ops da9034_regulator_ldo12_ops = { .enable_bit = (ebit), \ } -#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +#define DA903x_DVC(_pmic, _id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ { \ .desc = { \ .name = #_id, \ .ops = &da9034_regulator_dvc_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = DA9034_ID_##_id, \ + .id = _pmic##_ID_##_id, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ .owner = THIS_MODULE, \ }, \ .min_uV = (min) * 1000, \ .max_uV = (max) * 1000, \ .step_uV = (step) * 1000, \ - .vol_reg = DA9034_##vreg, \ + .vol_reg = _pmic##_##vreg, \ .vol_shift = (0), \ .vol_nbits = (nbits), \ - .update_reg = DA9034_##ureg, \ + .update_reg = _pmic##_##ureg, \ .update_bit = (ubit), \ - .enable_reg = DA9034_##ereg, \ + .enable_reg = _pmic##_##ereg, \ .enable_bit = (ebit), \ } @@ -394,8 +432,22 @@ static struct regulator_ops da9034_regulator_ldo12_ops = { #define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) +#define DA9030_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9030, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + +#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9034, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + +#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ + DA903x_DVC(DA9035, _id, min, max, step, vreg, nbits, ureg, ubit, \ + ereg, ebit) + static struct da903x_regulator_info da903x_regulator_info[] = { /* DA9030 */ + DA9030_DVC(BUCK2, 850, 1625, 25, BUCK2DVM1, 5, BUCK2DVM1, 7, RCTL11, 0), + DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), @@ -417,9 +469,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = { DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ /* DA9034 */ - DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), - DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), - DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2), DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), @@ -435,6 +487,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = { DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ + + /* DA9035 */ + DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3), }; static inline struct da903x_regulator_info *find_regulator_info(int id) @@ -462,8 +517,10 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) } /* Workaround for the weird LDO12 voltage setting */ - if (ri->desc.id == DA9034_ID_LDO12) + if (ri->desc.id == DA9034_ID_LDO12) { ri->desc.ops = &da9034_regulator_ldo12_ops; + ri->desc.n_voltages = ARRAY_SIZE(da9034_ldo12_data); + } if (ri->desc.id == DA9030_ID_LDO14) ri->desc.ops = &da9030_regulator_ldo14_ops; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index cdc674fb46c..f8b295700d7 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -5,6 +5,9 @@ * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros <ext-roger.quadros@nokia.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the @@ -20,20 +23,45 @@ #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/fixed.h> +#include <linux/gpio.h> struct fixed_voltage_data { struct regulator_desc desc; struct regulator_dev *dev; int microvolts; + int gpio; + unsigned enable_high:1; + unsigned is_enabled:1; }; static int fixed_voltage_is_enabled(struct regulator_dev *dev) { - return 1; + struct fixed_voltage_data *data = rdev_get_drvdata(dev); + + return data->is_enabled; } static int fixed_voltage_enable(struct regulator_dev *dev) { + struct fixed_voltage_data *data = rdev_get_drvdata(dev); + + if (gpio_is_valid(data->gpio)) { + gpio_set_value_cansleep(data->gpio, data->enable_high); + data->is_enabled = 1; + } + + return 0; +} + +static int fixed_voltage_disable(struct regulator_dev *dev) +{ + struct fixed_voltage_data *data = rdev_get_drvdata(dev); + + if (gpio_is_valid(data->gpio)) { + gpio_set_value_cansleep(data->gpio, !data->enable_high); + data->is_enabled = 0; + } + return 0; } @@ -58,6 +86,7 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev, static struct regulator_ops fixed_voltage_ops = { .is_enabled = fixed_voltage_is_enabled, .enable = fixed_voltage_enable, + .disable = fixed_voltage_disable, .get_voltage = fixed_voltage_get_voltage, .list_voltage = fixed_voltage_list_voltage, }; @@ -70,12 +99,14 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev) drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL); if (drvdata == NULL) { + dev_err(&pdev->dev, "Failed to allocate device data\n"); ret = -ENOMEM; goto err; } drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); if (drvdata->desc.name == NULL) { + dev_err(&pdev->dev, "Failed to allocate supply name\n"); ret = -ENOMEM; goto err; } @@ -85,12 +116,62 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev) drvdata->desc.n_voltages = 1; drvdata->microvolts = config->microvolts; + drvdata->gpio = config->gpio; + + if (gpio_is_valid(config->gpio)) { + drvdata->enable_high = config->enable_high; + + /* FIXME: Remove below print warning + * + * config->gpio must be set to -EINVAL by platform code if + * GPIO control is not required. However, early adopters + * not requiring GPIO control may forget to initialize + * config->gpio to -EINVAL. This will cause GPIO 0 to be used + * for GPIO control. + * + * This warning will be removed once there are a couple of users + * for this driver. + */ + if (!config->gpio) + dev_warn(&pdev->dev, + "using GPIO 0 for regulator enable control\n"); + + ret = gpio_request(config->gpio, config->supply_name); + if (ret) { + dev_err(&pdev->dev, + "Could not obtain regulator enable GPIO %d: %d\n", + config->gpio, ret); + goto err_name; + } + + /* set output direction without changing state + * to prevent glitch + */ + drvdata->is_enabled = config->enabled_at_boot; + ret = drvdata->is_enabled ? + config->enable_high : !config->enable_high; + + ret = gpio_direction_output(config->gpio, ret); + if (ret) { + dev_err(&pdev->dev, + "Could not configure regulator enable GPIO %d direction: %d\n", + config->gpio, ret); + goto err_gpio; + } + + } else { + /* Regulator without GPIO control is considered + * always enabled + */ + drvdata->is_enabled = 1; + } drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev, config->init_data, drvdata); if (IS_ERR(drvdata->dev)) { ret = PTR_ERR(drvdata->dev); - goto err_name; + dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); + goto err_gpio; } platform_set_drvdata(pdev, drvdata); @@ -100,6 +181,9 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev) return 0; +err_gpio: + if (gpio_is_valid(config->gpio)) + gpio_free(config->gpio); err_name: kfree(drvdata->desc.name); err: @@ -115,6 +199,9 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev) kfree(drvdata->desc.name); kfree(drvdata); + if (gpio_is_valid(drvdata->gpio)) + gpio_free(drvdata->gpio); + return 0; } diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index a61018a2769..7803a320543 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -541,7 +541,7 @@ static struct i2c_driver lp3971_i2c_driver = { static int __init lp3971_module_init(void) { - int ret = -ENODEV; + int ret; ret = i2c_add_driver(&lp3971_i2c_driver); if (ret != 0) diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c index 8e14900eb68..0803ffe6236 100644 --- a/drivers/regulator/pcf50633-regulator.c +++ b/drivers/regulator/pcf50633-regulator.c @@ -24,11 +24,12 @@ #include <linux/mfd/pcf50633/core.h> #include <linux/mfd/pcf50633/pmic.h> -#define PCF50633_REGULATOR(_name, _id) \ +#define PCF50633_REGULATOR(_name, _id, _n) \ { \ .name = _name, \ .id = _id, \ .ops = &pcf50633_regulator_ops, \ + .n_voltages = _n, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ } @@ -149,33 +150,20 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev, return pcf50633_reg_write(pcf, regnr, volt_bits); } -static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) +static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id, + u8 bits) { - struct pcf50633 *pcf; - int regulator_id, millivolts, volt_bits; - u8 regnr; - - pcf = rdev_get_drvdata(rdev);; + int millivolts; - regulator_id = rdev_get_id(rdev); - if (regulator_id >= PCF50633_NUM_REGULATORS) - return -EINVAL; - - regnr = pcf50633_regulator_registers[regulator_id]; - - volt_bits = pcf50633_reg_read(pcf, regnr); - if (volt_bits < 0) - return -1; - - switch (regulator_id) { + switch (id) { case PCF50633_REGULATOR_AUTO: - millivolts = auto_voltage_value(volt_bits); + millivolts = auto_voltage_value(bits); break; case PCF50633_REGULATOR_DOWN1: - millivolts = down_voltage_value(volt_bits); + millivolts = down_voltage_value(bits); break; case PCF50633_REGULATOR_DOWN2: - millivolts = down_voltage_value(volt_bits); + millivolts = down_voltage_value(bits); break; case PCF50633_REGULATOR_LDO1: case PCF50633_REGULATOR_LDO2: @@ -184,7 +172,7 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) case PCF50633_REGULATOR_LDO5: case PCF50633_REGULATOR_LDO6: case PCF50633_REGULATOR_HCLDO: - millivolts = ldo_voltage_value(volt_bits); + millivolts = ldo_voltage_value(bits); break; default: return -EINVAL; @@ -193,6 +181,49 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) return millivolts * 1000; } +static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pcf50633 *pcf; + int regulator_id; + u8 volt_bits, regnr; + + pcf = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + if (regulator_id >= PCF50633_NUM_REGULATORS) + return -EINVAL; + + regnr = pcf50633_regulator_registers[regulator_id]; + + volt_bits = pcf50633_reg_read(pcf, regnr); + + return pcf50633_regulator_voltage_value(regulator_id, volt_bits); +} + +static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev, + unsigned int index) +{ + struct pcf50633 *pcf; + int regulator_id; + + pcf = rdev_get_drvdata(rdev); + + regulator_id = rdev_get_id(rdev); + + switch (regulator_id) { + case PCF50633_REGULATOR_AUTO: + index += 0x2f; + break; + case PCF50633_REGULATOR_HCLDO: + index += 0x01; + break; + default: + break; + } + + return pcf50633_regulator_voltage_value(regulator_id, index); +} + static int pcf50633_regulator_enable(struct regulator_dev *rdev) { struct pcf50633 *pcf = rdev_get_drvdata(rdev); @@ -246,6 +277,7 @@ static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev) static struct regulator_ops pcf50633_regulator_ops = { .set_voltage = pcf50633_regulator_set_voltage, .get_voltage = pcf50633_regulator_get_voltage, + .list_voltage = pcf50633_regulator_list_voltage, .enable = pcf50633_regulator_enable, .disable = pcf50633_regulator_disable, .is_enabled = pcf50633_regulator_is_enabled, @@ -253,27 +285,27 @@ static struct regulator_ops pcf50633_regulator_ops = { static struct regulator_desc regulators[] = { [PCF50633_REGULATOR_AUTO] = - PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO), + PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 80), [PCF50633_REGULATOR_DOWN1] = - PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1), + PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 95), [PCF50633_REGULATOR_DOWN2] = - PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2), + PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 95), [PCF50633_REGULATOR_LDO1] = - PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1), + PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 27), [PCF50633_REGULATOR_LDO2] = - PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2), + PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 27), [PCF50633_REGULATOR_LDO3] = - PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3), + PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 27), [PCF50633_REGULATOR_LDO4] = - PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4), + PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 27), [PCF50633_REGULATOR_LDO5] = - PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5), + PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 27), [PCF50633_REGULATOR_LDO6] = - PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6), + PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 27), [PCF50633_REGULATOR_HCLDO] = - PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO), + PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 26), [PCF50633_REGULATOR_MEMLDO] = - PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO), + PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 0), }; static int __devinit pcf50633_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c new file mode 100644 index 00000000000..07fda0a75ad --- /dev/null +++ b/drivers/regulator/tps65023-regulator.c @@ -0,0 +1,632 @@ +/* + * tps65023-regulator.c + * + * Supports TPS65023 Regulator + * + * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/delay.h> + +/* Register definitions */ +#define TPS65023_REG_VERSION 0 +#define TPS65023_REG_PGOODZ 1 +#define TPS65023_REG_MASK 2 +#define TPS65023_REG_REG_CTRL 3 +#define TPS65023_REG_CON_CTRL 4 +#define TPS65023_REG_CON_CTRL2 5 +#define TPS65023_REG_DEF_CORE 6 +#define TPS65023_REG_DEFSLEW 7 +#define TPS65023_REG_LDO_CTRL 8 + +/* PGOODZ bitfields */ +#define TPS65023_PGOODZ_PWRFAILZ BIT(7) +#define TPS65023_PGOODZ_LOWBATTZ BIT(6) +#define TPS65023_PGOODZ_VDCDC1 BIT(5) +#define TPS65023_PGOODZ_VDCDC2 BIT(4) +#define TPS65023_PGOODZ_VDCDC3 BIT(3) +#define TPS65023_PGOODZ_LDO2 BIT(2) +#define TPS65023_PGOODZ_LDO1 BIT(1) + +/* MASK bitfields */ +#define TPS65023_MASK_PWRFAILZ BIT(7) +#define TPS65023_MASK_LOWBATTZ BIT(6) +#define TPS65023_MASK_VDCDC1 BIT(5) +#define TPS65023_MASK_VDCDC2 BIT(4) +#define TPS65023_MASK_VDCDC3 BIT(3) +#define TPS65023_MASK_LDO2 BIT(2) +#define TPS65023_MASK_LDO1 BIT(1) + +/* REG_CTRL bitfields */ +#define TPS65023_REG_CTRL_VDCDC1_EN BIT(5) +#define TPS65023_REG_CTRL_VDCDC2_EN BIT(4) +#define TPS65023_REG_CTRL_VDCDC3_EN BIT(3) +#define TPS65023_REG_CTRL_LDO2_EN BIT(2) +#define TPS65023_REG_CTRL_LDO1_EN BIT(1) + +/* LDO_CTRL bitfields */ +#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4) +#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0xF0 >> ((ldo_id)*4)) + +/* Number of step-down converters available */ +#define TPS65023_NUM_DCDC 3 +/* Number of LDO voltage regulators available */ +#define TPS65023_NUM_LDO 2 +/* Number of total regulators available */ +#define TPS65023_NUM_REGULATOR (TPS65023_NUM_DCDC + TPS65023_NUM_LDO) + +/* DCDCs */ +#define TPS65023_DCDC_1 0 +#define TPS65023_DCDC_2 1 +#define TPS65023_DCDC_3 2 +/* LDOs */ +#define TPS65023_LDO_1 3 +#define TPS65023_LDO_2 4 + +#define TPS65023_MAX_REG_ID TPS65023_LDO_2 + +/* Supported voltage values for regulators */ +static const u16 VDCDC1_VSEL_table[] = { + 800, 825, 850, 875, + 900, 925, 950, 975, + 1000, 1025, 1050, 1075, + 1100, 1125, 1150, 1175, + 1200, 1225, 1250, 1275, + 1300, 1325, 1350, 1375, + 1400, 1425, 1450, 1475, + 1500, 1525, 1550, 1600, +}; + +static const u16 LDO1_VSEL_table[] = { + 1000, 1100, 1300, 1800, + 2200, 2600, 2800, 3150, +}; + +static const u16 LDO2_VSEL_table[] = { + 1050, 1200, 1300, 1800, + 2500, 2800, 3000, 3300, +}; + +static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table), + 0, 0, ARRAY_SIZE(LDO1_VSEL_table), + ARRAY_SIZE(LDO2_VSEL_table)}; + +/* Regulator specific details */ +struct tps_info { + const char *name; + unsigned min_uV; + unsigned max_uV; + bool fixed; + u8 table_len; + const u16 *table; +}; + +/* PMIC details */ +struct tps_pmic { + struct regulator_desc desc[TPS65023_NUM_REGULATOR]; + struct i2c_client *client; + struct regulator_dev *rdev[TPS65023_NUM_REGULATOR]; + const struct tps_info *info[TPS65023_NUM_REGULATOR]; + struct mutex io_lock; +}; + +static inline int tps_65023_read(struct tps_pmic *tps, u8 reg) +{ + return i2c_smbus_read_byte_data(tps->client, reg); +} + +static inline int tps_65023_write(struct tps_pmic *tps, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(tps->client, reg, val); +} + +static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask) +{ + int err, data; + + mutex_lock(&tps->io_lock); + + data = tps_65023_read(tps, reg); + if (data < 0) { + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + err = data; + goto out; + } + + data |= mask; + err = tps_65023_write(tps, reg, data); + if (err) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps->io_lock); + return err; +} + +static int tps_65023_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask) +{ + int err, data; + + mutex_lock(&tps->io_lock); + + data = tps_65023_read(tps, reg); + if (data < 0) { + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + err = data; + goto out; + } + + data &= ~mask; + + err = tps_65023_write(tps, reg, data); + if (err) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps->io_lock); + return err; + +} + +static int tps_65023_reg_read(struct tps_pmic *tps, u8 reg) +{ + int data; + + mutex_lock(&tps->io_lock); + + data = tps_65023_read(tps, reg); + if (data < 0) + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + + mutex_unlock(&tps->io_lock); + return data; +} + +static int tps_65023_reg_write(struct tps_pmic *tps, u8 reg, u8 val) +{ + int err; + + mutex_lock(&tps->io_lock); + + err = tps_65023_write(tps, reg, val); + if (err < 0) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + + mutex_unlock(&tps->io_lock); + return err; +} + +static int tps65023_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) + return -EINVAL; + + shift = TPS65023_NUM_REGULATOR - dcdc; + data = tps_65023_reg_read(tps, TPS65023_REG_REG_CTRL); + + if (data < 0) + return data; + else + return (data & 1<<shift) ? 1 : 0; +} + +static int tps65023_ldo_is_enabled(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + shift = (ldo == TPS65023_LDO_1 ? 1 : 2); + data = tps_65023_reg_read(tps, TPS65023_REG_REG_CTRL); + + if (data < 0) + return data; + else + return (data & 1<<shift) ? 1 : 0; +} + +static int tps65023_dcdc_enable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) + return -EINVAL; + + shift = TPS65023_NUM_REGULATOR - dcdc; + return tps_65023_set_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift); +} + +static int tps65023_dcdc_disable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) + return -EINVAL; + + shift = TPS65023_NUM_REGULATOR - dcdc; + return tps_65023_clear_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift); +} + +static int tps65023_ldo_enable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + shift = (ldo == TPS65023_LDO_1 ? 1 : 2); + return tps_65023_set_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift); +} + +static int tps65023_ldo_disable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + shift = (ldo == TPS65023_LDO_1 ? 1 : 2); + return tps_65023_clear_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift); +} + +static int tps65023_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, dcdc = rdev_get_id(dev); + + if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) + return -EINVAL; + + if (dcdc == TPS65023_DCDC_1) { + data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE); + if (data < 0) + return data; + data &= (tps->info[dcdc]->table_len - 1); + return tps->info[dcdc]->table[data] * 1000; + } else + return tps->info[dcdc]->min_uV; +} + +static int tps65023_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + int vsel; + + if (dcdc != TPS65023_DCDC_1) + return -EINVAL; + + if (min_uV < tps->info[dcdc]->min_uV + || min_uV > tps->info[dcdc]->max_uV) + return -EINVAL; + if (max_uV < tps->info[dcdc]->min_uV + || max_uV > tps->info[dcdc]->max_uV) + return -EINVAL; + + for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) { + int mV = tps->info[dcdc]->table[vsel]; + int uV = mV * 1000; + + /* Break at the first in-range value */ + if (min_uV <= uV && uV <= max_uV) + break; + } + + /* write to the register in case we found a match */ + if (vsel == tps->info[dcdc]->table_len) + return -EINVAL; + else + return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel); +} + +static int tps65023_ldo_get_voltage(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, ldo = rdev_get_id(dev); + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + data = tps_65023_reg_read(tps, TPS65023_REG_LDO_CTRL); + if (data < 0) + return data; + + data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1)); + data &= (tps->info[ldo]->table_len - 1); + return tps->info[ldo]->table[data] * 1000; +} + +static int tps65023_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, vsel, ldo = rdev_get_id(dev); + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV) + return -EINVAL; + if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV) + return -EINVAL; + + for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) { + int mV = tps->info[ldo]->table[vsel]; + int uV = mV * 1000; + + /* Break at the first in-range value */ + if (min_uV <= uV && uV <= max_uV) + break; + } + + if (vsel == tps->info[ldo]->table_len) + return -EINVAL; + + data = tps_65023_reg_read(tps, TPS65023_REG_LDO_CTRL); + if (data < 0) + return data; + + data &= TPS65023_LDO_CTRL_LDOx_MASK(ldo - TPS65023_LDO_1); + data |= (vsel << (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1))); + return tps_65023_reg_write(tps, TPS65023_REG_LDO_CTRL, data); +} + +static int tps65023_dcdc_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + + if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) + return -EINVAL; + + if (dcdc == TPS65023_DCDC_1) { + if (selector >= tps->info[dcdc]->table_len) + return -EINVAL; + else + return tps->info[dcdc]->table[selector] * 1000; + } else + return tps->info[dcdc]->min_uV; +} + +static int tps65023_ldo_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + + if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2) + return -EINVAL; + + if (selector >= tps->info[ldo]->table_len) + return -EINVAL; + else + return tps->info[ldo]->table[selector] * 1000; +} + +/* Operations permitted on VDCDCx */ +static struct regulator_ops tps65023_dcdc_ops = { + .is_enabled = tps65023_dcdc_is_enabled, + .enable = tps65023_dcdc_enable, + .disable = tps65023_dcdc_disable, + .get_voltage = tps65023_dcdc_get_voltage, + .set_voltage = tps65023_dcdc_set_voltage, + .list_voltage = tps65023_dcdc_list_voltage, +}; + +/* Operations permitted on LDOx */ +static struct regulator_ops tps65023_ldo_ops = { + .is_enabled = tps65023_ldo_is_enabled, + .enable = tps65023_ldo_enable, + .disable = tps65023_ldo_disable, + .get_voltage = tps65023_ldo_get_voltage, + .set_voltage = tps65023_ldo_set_voltage, + .list_voltage = tps65023_ldo_list_voltage, +}; + +static +int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + static int desc_id; + const struct tps_info *info = (void *)id->driver_data; + struct regulator_init_data *init_data; + struct regulator_dev *rdev; + struct tps_pmic *tps; + int i; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + /** + * init_data points to array of regulator_init structures + * coming from the board-evm file. + */ + init_data = client->dev.platform_data; + + if (!init_data) + return -EIO; + + tps = kzalloc(sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + mutex_init(&tps->io_lock); + + /* common for all regulators */ + tps->client = client; + + for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) { + /* Store regulator specific information */ + tps->info[i] = info; + + tps->desc[i].name = info->name; + tps->desc[i].id = desc_id++; + tps->desc[i].n_voltages = num_voltages[i]; + tps->desc[i].ops = (i > TPS65023_DCDC_3 ? + &tps65023_ldo_ops : &tps65023_dcdc_ops); + tps->desc[i].type = REGULATOR_VOLTAGE; + tps->desc[i].owner = THIS_MODULE; + + /* Register the regulators */ + rdev = regulator_register(&tps->desc[i], &client->dev, + init_data, tps); + if (IS_ERR(rdev)) { + dev_err(&client->dev, "failed to register %s\n", + id->name); + + /* Unregister */ + while (i) + regulator_unregister(tps->rdev[--i]); + + tps->client = NULL; + + /* clear the client data in i2c */ + i2c_set_clientdata(client, NULL); + kfree(tps); + return PTR_ERR(rdev); + } + + /* Save regulator for cleanup */ + tps->rdev[i] = rdev; + } + + i2c_set_clientdata(client, tps); + + return 0; +} + +/** + * tps_65023_remove - TPS65023 driver i2c remove handler + * @client: i2c driver client device structure + * + * Unregister TPS driver as an i2c client device driver + */ +static int __devexit tps_65023_remove(struct i2c_client *client) +{ + struct tps_pmic *tps = i2c_get_clientdata(client); + int i; + + for (i = 0; i < TPS65023_NUM_REGULATOR; i++) + regulator_unregister(tps->rdev[i]); + + tps->client = NULL; + + /* clear the client data in i2c */ + i2c_set_clientdata(client, NULL); + kfree(tps); + + return 0; +} + +static const struct tps_info tps65023_regs[] = { + { + .name = "VDCDC1", + .min_uV = 800000, + .max_uV = 1600000, + .table_len = ARRAY_SIZE(VDCDC1_VSEL_table), + .table = VDCDC1_VSEL_table, + }, + { + .name = "VDCDC2", + .min_uV = 3300000, + .max_uV = 3300000, + .fixed = 1, + }, + { + .name = "VDCDC3", + .min_uV = 1800000, + .max_uV = 1800000, + .fixed = 1, + }, + { + .name = "LDO1", + .min_uV = 1000000, + .max_uV = 3150000, + .table_len = ARRAY_SIZE(LDO1_VSEL_table), + .table = LDO1_VSEL_table, + }, + { + .name = "LDO2", + .min_uV = 1050000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(LDO2_VSEL_table), + .table = LDO2_VSEL_table, + }, +}; + +static const struct i2c_device_id tps_65023_id[] = { + {.name = "tps65023", + .driver_data = (unsigned long) tps65023_regs,}, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, tps_65023_id); + +static struct i2c_driver tps_65023_i2c_driver = { + .driver = { + .name = "tps65023", + .owner = THIS_MODULE, + }, + .probe = tps_65023_probe, + .remove = __devexit_p(tps_65023_remove), + .id_table = tps_65023_id, +}; + +/** + * tps_65023_init + * + * Module init function + */ +static int __init tps_65023_init(void) +{ + return i2c_add_driver(&tps_65023_i2c_driver); +} +subsys_initcall(tps_65023_init); + +/** + * tps_65023_cleanup + * + * Module exit function + */ +static void __exit tps_65023_cleanup(void) +{ + i2c_del_driver(&tps_65023_i2c_driver); +} +module_exit(tps_65023_cleanup); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TPS65023 voltage regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c new file mode 100644 index 00000000000..f8a6dfbef75 --- /dev/null +++ b/drivers/regulator/tps6507x-regulator.c @@ -0,0 +1,714 @@ +/* + * tps6507x-regulator.c + * + * Regulator driver for TPS65073 PMIC + * + * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/delay.h> + +/* Register definitions */ +#define TPS6507X_REG_PPATH1 0X01 +#define TPS6507X_REG_INT 0X02 +#define TPS6507X_REG_CHGCONFIG0 0X03 +#define TPS6507X_REG_CHGCONFIG1 0X04 +#define TPS6507X_REG_CHGCONFIG2 0X05 +#define TPS6507X_REG_CHGCONFIG3 0X06 +#define TPS6507X_REG_REG_ADCONFIG 0X07 +#define TPS6507X_REG_TSCMODE 0X08 +#define TPS6507X_REG_ADRESULT_1 0X09 +#define TPS6507X_REG_ADRESULT_2 0X0A +#define TPS6507X_REG_PGOOD 0X0B +#define TPS6507X_REG_PGOODMASK 0X0C +#define TPS6507X_REG_CON_CTRL1 0X0D +#define TPS6507X_REG_CON_CTRL2 0X0E +#define TPS6507X_REG_CON_CTRL3 0X0F +#define TPS6507X_REG_DEFDCDC1 0X10 +#define TPS6507X_REG_DEFDCDC2_LOW 0X11 +#define TPS6507X_REG_DEFDCDC2_HIGH 0X12 +#define TPS6507X_REG_DEFDCDC3_LOW 0X13 +#define TPS6507X_REG_DEFDCDC3_HIGH 0X14 +#define TPS6507X_REG_DEFSLEW 0X15 +#define TPS6507X_REG_LDO_CTRL1 0X16 +#define TPS6507X_REG_DEFLDO2 0X17 +#define TPS6507X_REG_WLED_CTRL1 0X18 +#define TPS6507X_REG_WLED_CTRL2 0X19 + +/* CON_CTRL1 bitfields */ +#define TPS6507X_CON_CTRL1_DCDC1_ENABLE BIT(4) +#define TPS6507X_CON_CTRL1_DCDC2_ENABLE BIT(3) +#define TPS6507X_CON_CTRL1_DCDC3_ENABLE BIT(2) +#define TPS6507X_CON_CTRL1_LDO1_ENABLE BIT(1) +#define TPS6507X_CON_CTRL1_LDO2_ENABLE BIT(0) + +/* DEFDCDC1 bitfields */ +#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN BIT(7) +#define TPS6507X_DEFDCDC1_DCDC1_MASK 0X3F + +/* DEFDCDC2_LOW bitfields */ +#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK 0X3F + +/* DEFDCDC2_HIGH bitfields */ +#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK 0X3F + +/* DEFDCDC3_LOW bitfields */ +#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK 0X3F + +/* DEFDCDC3_HIGH bitfields */ +#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK 0X3F + +/* TPS6507X_REG_LDO_CTRL1 bitfields */ +#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK 0X0F + +/* TPS6507X_REG_DEFLDO2 bitfields */ +#define TPS6507X_REG_DEFLDO2_LDO2_MASK 0X3F + +/* VDCDC MASK */ +#define TPS6507X_DEFDCDCX_DCDC_MASK 0X3F + +/* DCDC's */ +#define TPS6507X_DCDC_1 0 +#define TPS6507X_DCDC_2 1 +#define TPS6507X_DCDC_3 2 +/* LDOs */ +#define TPS6507X_LDO_1 3 +#define TPS6507X_LDO_2 4 + +#define TPS6507X_MAX_REG_ID TPS6507X_LDO_2 + +/* Number of step-down converters available */ +#define TPS6507X_NUM_DCDC 3 +/* Number of LDO voltage regulators available */ +#define TPS6507X_NUM_LDO 2 +/* Number of total regulators available */ +#define TPS6507X_NUM_REGULATOR (TPS6507X_NUM_DCDC + TPS6507X_NUM_LDO) + +/* Supported voltage values for regulators (in milliVolts) */ +static const u16 VDCDCx_VSEL_table[] = { + 725, 750, 775, 800, + 825, 850, 875, 900, + 925, 950, 975, 1000, + 1025, 1050, 1075, 1100, + 1125, 1150, 1175, 1200, + 1225, 1250, 1275, 1300, + 1325, 1350, 1375, 1400, + 1425, 1450, 1475, 1500, + 1550, 1600, 1650, 1700, + 1750, 1800, 1850, 1900, + 1950, 2000, 2050, 2100, + 2150, 2200, 2250, 2300, + 2350, 2400, 2450, 2500, + 2550, 2600, 2650, 2700, + 2750, 2800, 2850, 2900, + 3000, 3100, 3200, 3300, +}; + +static const u16 LDO1_VSEL_table[] = { + 1000, 1100, 1200, 1250, + 1300, 1350, 1400, 1500, + 1600, 1800, 2500, 2750, + 2800, 3000, 3100, 3300, +}; + +static const u16 LDO2_VSEL_table[] = { + 725, 750, 775, 800, + 825, 850, 875, 900, + 925, 950, 975, 1000, + 1025, 1050, 1075, 1100, + 1125, 1150, 1175, 1200, + 1225, 1250, 1275, 1300, + 1325, 1350, 1375, 1400, + 1425, 1450, 1475, 1500, + 1550, 1600, 1650, 1700, + 1750, 1800, 1850, 1900, + 1950, 2000, 2050, 2100, + 2150, 2200, 2250, 2300, + 2350, 2400, 2450, 2500, + 2550, 2600, 2650, 2700, + 2750, 2800, 2850, 2900, + 3000, 3100, 3200, 3300, +}; + +static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDCx_VSEL_table), + ARRAY_SIZE(VDCDCx_VSEL_table), + ARRAY_SIZE(VDCDCx_VSEL_table), + ARRAY_SIZE(LDO1_VSEL_table), + ARRAY_SIZE(LDO2_VSEL_table)}; + +struct tps_info { + const char *name; + unsigned min_uV; + unsigned max_uV; + u8 table_len; + const u16 *table; +}; + +struct tps_pmic { + struct regulator_desc desc[TPS6507X_NUM_REGULATOR]; + struct i2c_client *client; + struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR]; + const struct tps_info *info[TPS6507X_NUM_REGULATOR]; + struct mutex io_lock; +}; + +static inline int tps_6507x_read(struct tps_pmic *tps, u8 reg) +{ + return i2c_smbus_read_byte_data(tps->client, reg); +} + +static inline int tps_6507x_write(struct tps_pmic *tps, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(tps->client, reg, val); +} + +static int tps_6507x_set_bits(struct tps_pmic *tps, u8 reg, u8 mask) +{ + int err, data; + + mutex_lock(&tps->io_lock); + + data = tps_6507x_read(tps, reg); + if (data < 0) { + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + err = data; + goto out; + } + + data |= mask; + err = tps_6507x_write(tps, reg, data); + if (err) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps->io_lock); + return err; +} + +static int tps_6507x_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask) +{ + int err, data; + + mutex_lock(&tps->io_lock); + + data = tps_6507x_read(tps, reg); + if (data < 0) { + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + err = data; + goto out; + } + + data &= ~mask; + err = tps_6507x_write(tps, reg, data); + if (err) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + +out: + mutex_unlock(&tps->io_lock); + return err; +} + +static int tps_6507x_reg_read(struct tps_pmic *tps, u8 reg) +{ + int data; + + mutex_lock(&tps->io_lock); + + data = tps_6507x_read(tps, reg); + if (data < 0) + dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg); + + mutex_unlock(&tps->io_lock); + return data; +} + +static int tps_6507x_reg_write(struct tps_pmic *tps, u8 reg, u8 val) +{ + int err; + + mutex_lock(&tps->io_lock); + + err = tps_6507x_write(tps, reg, val); + if (err < 0) + dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg); + + mutex_unlock(&tps->io_lock); + return err; +} + +static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - dcdc; + data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1); + + if (data < 0) + return data; + else + return (data & 1<<shift) ? 1 : 0; +} + +static int tps6507x_ldo_is_enabled(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - ldo; + data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1); + + if (data < 0) + return data; + else + return (data & 1<<shift) ? 1 : 0; +} + +static int tps6507x_dcdc_enable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - dcdc; + return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift); +} + +static int tps6507x_dcdc_disable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + u8 shift; + + if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - dcdc; + return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift); +} + +static int tps6507x_ldo_enable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - ldo; + return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift); +} + +static int tps6507x_ldo_disable(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + u8 shift; + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + + shift = TPS6507X_MAX_REG_ID - ldo; + return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift); +} + +static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, dcdc = rdev_get_id(dev); + u8 reg; + + switch (dcdc) { + case TPS6507X_DCDC_1: + reg = TPS6507X_REG_DEFDCDC1; + break; + case TPS6507X_DCDC_2: + reg = TPS6507X_REG_DEFDCDC2_LOW; + break; + case TPS6507X_DCDC_3: + reg = TPS6507X_REG_DEFDCDC3_LOW; + break; + default: + return -EINVAL; + } + + data = tps_6507x_reg_read(tps, reg); + if (data < 0) + return data; + + data &= TPS6507X_DEFDCDCX_DCDC_MASK; + return tps->info[dcdc]->table[data] * 1000; +} + +static int tps6507x_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, vsel, dcdc = rdev_get_id(dev); + u8 reg; + + switch (dcdc) { + case TPS6507X_DCDC_1: + reg = TPS6507X_REG_DEFDCDC1; + break; + case TPS6507X_DCDC_2: + reg = TPS6507X_REG_DEFDCDC2_LOW; + break; + case TPS6507X_DCDC_3: + reg = TPS6507X_REG_DEFDCDC3_LOW; + break; + default: + return -EINVAL; + } + + if (min_uV < tps->info[dcdc]->min_uV + || min_uV > tps->info[dcdc]->max_uV) + return -EINVAL; + if (max_uV < tps->info[dcdc]->min_uV + || max_uV > tps->info[dcdc]->max_uV) + return -EINVAL; + + for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) { + int mV = tps->info[dcdc]->table[vsel]; + int uV = mV * 1000; + + /* Break at the first in-range value */ + if (min_uV <= uV && uV <= max_uV) + break; + } + + /* write to the register in case we found a match */ + if (vsel == tps->info[dcdc]->table_len) + return -EINVAL; + + data = tps_6507x_reg_read(tps, reg); + if (data < 0) + return data; + + data &= ~TPS6507X_DEFDCDCX_DCDC_MASK; + data |= vsel; + + return tps_6507x_reg_write(tps, reg, data); +} + +static int tps6507x_ldo_get_voltage(struct regulator_dev *dev) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, ldo = rdev_get_id(dev); + u8 reg, mask; + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + else { + reg = (ldo == TPS6507X_LDO_1 ? + TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2); + mask = (ldo == TPS6507X_LDO_1 ? + TPS6507X_REG_LDO_CTRL1_LDO1_MASK : + TPS6507X_REG_DEFLDO2_LDO2_MASK); + } + + data = tps_6507x_reg_read(tps, reg); + if (data < 0) + return data; + + data &= mask; + return tps->info[ldo]->table[data] * 1000; +} + +static int tps6507x_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int data, vsel, ldo = rdev_get_id(dev); + u8 reg, mask; + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + else { + reg = (ldo == TPS6507X_LDO_1 ? + TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2); + mask = (ldo == TPS6507X_LDO_1 ? + TPS6507X_REG_LDO_CTRL1_LDO1_MASK : + TPS6507X_REG_DEFLDO2_LDO2_MASK); + } + + if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV) + return -EINVAL; + if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV) + return -EINVAL; + + for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) { + int mV = tps->info[ldo]->table[vsel]; + int uV = mV * 1000; + + /* Break at the first in-range value */ + if (min_uV <= uV && uV <= max_uV) + break; + } + + if (vsel == tps->info[ldo]->table_len) + return -EINVAL; + + data = tps_6507x_reg_read(tps, reg); + if (data < 0) + return data; + + data &= ~mask; + data |= vsel; + + return tps_6507x_reg_write(tps, reg, data); +} + +static int tps6507x_dcdc_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int dcdc = rdev_get_id(dev); + + if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3) + return -EINVAL; + + if (selector >= tps->info[dcdc]->table_len) + return -EINVAL; + else + return tps->info[dcdc]->table[selector] * 1000; +} + +static int tps6507x_ldo_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct tps_pmic *tps = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev); + + if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2) + return -EINVAL; + + if (selector >= tps->info[ldo]->table_len) + return -EINVAL; + else + return tps->info[ldo]->table[selector] * 1000; +} + +/* Operations permitted on VDCDCx */ +static struct regulator_ops tps6507x_dcdc_ops = { + .is_enabled = tps6507x_dcdc_is_enabled, + .enable = tps6507x_dcdc_enable, + .disable = tps6507x_dcdc_disable, + .get_voltage = tps6507x_dcdc_get_voltage, + .set_voltage = tps6507x_dcdc_set_voltage, + .list_voltage = tps6507x_dcdc_list_voltage, +}; + +/* Operations permitted on LDOx */ +static struct regulator_ops tps6507x_ldo_ops = { + .is_enabled = tps6507x_ldo_is_enabled, + .enable = tps6507x_ldo_enable, + .disable = tps6507x_ldo_disable, + .get_voltage = tps6507x_ldo_get_voltage, + .set_voltage = tps6507x_ldo_set_voltage, + .list_voltage = tps6507x_ldo_list_voltage, +}; + +static +int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + static int desc_id; + const struct tps_info *info = (void *)id->driver_data; + struct regulator_init_data *init_data; + struct regulator_dev *rdev; + struct tps_pmic *tps; + int i; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + /** + * init_data points to array of regulator_init structures + * coming from the board-evm file. + */ + init_data = client->dev.platform_data; + + if (!init_data) + return -EIO; + + tps = kzalloc(sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + mutex_init(&tps->io_lock); + + /* common for all regulators */ + tps->client = client; + + for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) { + /* Register the regulators */ + tps->info[i] = info; + tps->desc[i].name = info->name; + tps->desc[i].id = desc_id++; + tps->desc[i].n_voltages = num_voltages[i]; + tps->desc[i].ops = (i > TPS6507X_DCDC_3 ? + &tps6507x_ldo_ops : &tps6507x_dcdc_ops); + tps->desc[i].type = REGULATOR_VOLTAGE; + tps->desc[i].owner = THIS_MODULE; + + rdev = regulator_register(&tps->desc[i], + &client->dev, init_data, tps); + if (IS_ERR(rdev)) { + dev_err(&client->dev, "failed to register %s\n", + id->name); + + /* Unregister */ + while (i) + regulator_unregister(tps->rdev[--i]); + + tps->client = NULL; + + /* clear the client data in i2c */ + i2c_set_clientdata(client, NULL); + + kfree(tps); + return PTR_ERR(rdev); + } + + /* Save regulator for cleanup */ + tps->rdev[i] = rdev; + } + + i2c_set_clientdata(client, tps); + + return 0; +} + +/** + * tps_6507x_remove - TPS6507x driver i2c remove handler + * @client: i2c driver client device structure + * + * Unregister TPS driver as an i2c client device driver + */ +static int __devexit tps_6507x_remove(struct i2c_client *client) +{ + struct tps_pmic *tps = i2c_get_clientdata(client); + int i; + + for (i = 0; i < TPS6507X_NUM_REGULATOR; i++) + regulator_unregister(tps->rdev[i]); + + tps->client = NULL; + + /* clear the client data in i2c */ + i2c_set_clientdata(client, NULL); + kfree(tps); + + return 0; +} + +static const struct tps_info tps6507x_regs[] = { + { + .name = "VDCDC1", + .min_uV = 725000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VDCDCx_VSEL_table), + .table = VDCDCx_VSEL_table, + }, + { + .name = "VDCDC2", + .min_uV = 725000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VDCDCx_VSEL_table), + .table = VDCDCx_VSEL_table, + }, + { + .name = "VDCDC3", + .min_uV = 725000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VDCDCx_VSEL_table), + .table = VDCDCx_VSEL_table, + }, + { + .name = "LDO1", + .min_uV = 1000000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(LDO1_VSEL_table), + .table = LDO1_VSEL_table, + }, + { + .name = "LDO2", + .min_uV = 725000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(LDO2_VSEL_table), + .table = LDO2_VSEL_table, + }, +}; + +static const struct i2c_device_id tps_6507x_id[] = { + {.name = "tps6507x", + .driver_data = (unsigned long) tps6507x_regs,}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps_6507x_id); + +static struct i2c_driver tps_6507x_i2c_driver = { + .driver = { + .name = "tps6507x", + .owner = THIS_MODULE, + }, + .probe = tps_6507x_probe, + .remove = __devexit_p(tps_6507x_remove), + .id_table = tps_6507x_id, +}; + +/** + * tps_6507x_init + * + * Module init function + */ +static int __init tps_6507x_init(void) +{ + return i2c_add_driver(&tps_6507x_i2c_driver); +} +subsys_initcall(tps_6507x_init); + +/** + * tps_6507x_cleanup + * + * Module exit function + */ +static void __exit tps_6507x_cleanup(void) +{ + i2c_del_driver(&tps_6507x_i2c_driver); +} +module_exit(tps_6507x_cleanup); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TPS6507x voltage regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c index 06d2fa96a8b..44917da4ac9 100644 --- a/drivers/regulator/userspace-consumer.c +++ b/drivers/regulator/userspace-consumer.c @@ -93,16 +93,21 @@ static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(name, 0444, reg_show_name, NULL); static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state); -static struct device_attribute *attributes[] = { - &dev_attr_name, - &dev_attr_state, +static struct attribute *attributes[] = { + &dev_attr_name.attr, + &dev_attr_state.attr, + NULL, +}; + +static const struct attribute_group attr_group = { + .attrs = attributes, }; static int regulator_userspace_consumer_probe(struct platform_device *pdev) { struct regulator_userspace_consumer_data *pdata; struct userspace_consumer_data *drvdata; - int ret, i; + int ret; pdata = pdev->dev.platform_data; if (!pdata) @@ -125,31 +130,29 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev) goto err_alloc_supplies; } - for (i = 0; i < ARRAY_SIZE(attributes); i++) { - ret = device_create_file(&pdev->dev, attributes[i]); - if (ret != 0) - goto err_create_attrs; - } + ret = sysfs_create_group(&pdev->dev.kobj, &attr_group); + if (ret != 0) + goto err_create_attrs; - if (pdata->init_on) + if (pdata->init_on) { ret = regulator_bulk_enable(drvdata->num_supplies, drvdata->supplies); - - drvdata->enabled = pdata->init_on; - - if (ret) { - dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret); - goto err_create_attrs; + if (ret) { + dev_err(&pdev->dev, + "Failed to set initial state: %d\n", ret); + goto err_enable; + } } + drvdata->enabled = pdata->init_on; platform_set_drvdata(pdev, drvdata); return 0; -err_create_attrs: - for (i = 0; i < ARRAY_SIZE(attributes); i++) - device_remove_file(&pdev->dev, attributes[i]); +err_enable: + sysfs_remove_group(&pdev->dev.kobj, &attr_group); +err_create_attrs: regulator_bulk_free(drvdata->num_supplies, drvdata->supplies); err_alloc_supplies: @@ -160,10 +163,8 @@ err_alloc_supplies: static int regulator_userspace_consumer_remove(struct platform_device *pdev) { struct userspace_consumer_data *data = platform_get_drvdata(pdev); - int i; - for (i = 0; i < ARRAY_SIZE(attributes); i++) - device_remove_file(&pdev->dev, attributes[i]); + sysfs_remove_group(&pdev->dev.kobj, &attr_group); if (data->enabled) regulator_bulk_disable(data->num_supplies, data->supplies); diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c index e7db5664722..addc032c84b 100644 --- a/drivers/regulator/virtual.c +++ b/drivers/regulator/virtual.c @@ -27,71 +27,81 @@ struct virtual_consumer_data { unsigned int mode; }; -static void update_voltage_constraints(struct virtual_consumer_data *data) +static void update_voltage_constraints(struct device *dev, + struct virtual_consumer_data *data) { int ret; if (data->min_uV && data->max_uV && data->min_uV <= data->max_uV) { + dev_dbg(dev, "Requesting %d-%duV\n", + data->min_uV, data->max_uV); ret = regulator_set_voltage(data->regulator, - data->min_uV, data->max_uV); + data->min_uV, data->max_uV); if (ret != 0) { - printk(KERN_ERR "regulator_set_voltage() failed: %d\n", - ret); + dev_err(dev, + "regulator_set_voltage() failed: %d\n", ret); return; } } if (data->min_uV && data->max_uV && !data->enabled) { + dev_dbg(dev, "Enabling regulator\n"); ret = regulator_enable(data->regulator); if (ret == 0) data->enabled = 1; else - printk(KERN_ERR "regulator_enable() failed: %d\n", + dev_err(dev, "regulator_enable() failed: %d\n", ret); } if (!(data->min_uV && data->max_uV) && data->enabled) { + dev_dbg(dev, "Disabling regulator\n"); ret = regulator_disable(data->regulator); if (ret == 0) data->enabled = 0; else - printk(KERN_ERR "regulator_disable() failed: %d\n", + dev_err(dev, "regulator_disable() failed: %d\n", ret); } } -static void update_current_limit_constraints(struct virtual_consumer_data - *data) +static void update_current_limit_constraints(struct device *dev, + struct virtual_consumer_data *data) { int ret; if (data->max_uA && data->min_uA <= data->max_uA) { + dev_dbg(dev, "Requesting %d-%duA\n", + data->min_uA, data->max_uA); ret = regulator_set_current_limit(data->regulator, data->min_uA, data->max_uA); if (ret != 0) { - pr_err("regulator_set_current_limit() failed: %d\n", - ret); + dev_err(dev, + "regulator_set_current_limit() failed: %d\n", + ret); return; } } if (data->max_uA && !data->enabled) { + dev_dbg(dev, "Enabling regulator\n"); ret = regulator_enable(data->regulator); if (ret == 0) data->enabled = 1; else - printk(KERN_ERR "regulator_enable() failed: %d\n", + dev_err(dev, "regulator_enable() failed: %d\n", ret); } if (!(data->min_uA && data->max_uA) && data->enabled) { + dev_dbg(dev, "Disabling regulator\n"); ret = regulator_disable(data->regulator); if (ret == 0) data->enabled = 0; else - printk(KERN_ERR "regulator_disable() failed: %d\n", + dev_err(dev, "regulator_disable() failed: %d\n", ret); } } @@ -115,7 +125,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); data->min_uV = val; - update_voltage_constraints(data); + update_voltage_constraints(dev, data); mutex_unlock(&data->lock); @@ -141,7 +151,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); data->max_uV = val; - update_voltage_constraints(data); + update_voltage_constraints(dev, data); mutex_unlock(&data->lock); @@ -167,7 +177,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); data->min_uA = val; - update_current_limit_constraints(data); + update_current_limit_constraints(dev, data); mutex_unlock(&data->lock); @@ -193,7 +203,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); data->max_uA = val; - update_current_limit_constraints(data); + update_current_limit_constraints(dev, data); mutex_unlock(&data->lock); @@ -276,8 +286,7 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev) drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL); if (drvdata == NULL) { - ret = -ENOMEM; - goto err; + return -ENOMEM; } mutex_init(&drvdata->lock); @@ -285,13 +294,18 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev) drvdata->regulator = regulator_get(&pdev->dev, reg_id); if (IS_ERR(drvdata->regulator)) { ret = PTR_ERR(drvdata->regulator); + dev_err(&pdev->dev, "Failed to obtain supply '%s': %d\n", + reg_id, ret); goto err; } for (i = 0; i < ARRAY_SIZE(attributes); i++) { ret = device_create_file(&pdev->dev, attributes[i]); - if (ret != 0) - goto err; + if (ret != 0) { + dev_err(&pdev->dev, "Failed to create attr %d: %d\n", + i, ret); + goto err_regulator; + } } drvdata->mode = regulator_get_mode(drvdata->regulator); @@ -300,6 +314,8 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev) return 0; +err_regulator: + regulator_put(drvdata->regulator); err: for (i = 0; i < ARRAY_SIZE(attributes); i++) device_remove_file(&pdev->dev, attributes[i]); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 17a00b0fafd..768bd0e5b48 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1419,6 +1419,8 @@ int wm8350_register_regulator(struct wm8350 *wm8350, int reg, { struct platform_device *pdev; int ret; + if (reg < 0 || reg >= NUM_WM8350_REGULATORS) + return -EINVAL; if (wm8350->pmic.pdev[reg]) return -EBUSY; diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h index 115dbe96508..c63b65c9442 100644 --- a/include/linux/mfd/da903x.h +++ b/include/linux/mfd/da903x.h @@ -1,7 +1,7 @@ #ifndef __LINUX_PMIC_DA903X_H #define __LINUX_PMIC_DA903X_H -/* Unified sub device IDs for DA9030/DA9034 */ +/* Unified sub device IDs for DA9030/DA9034/DA9035 */ enum { DA9030_ID_LED_1, DA9030_ID_LED_2, @@ -57,6 +57,8 @@ enum { DA9034_ID_LDO13, DA9034_ID_LDO14, DA9034_ID_LDO15, + + DA9035_ID_BUCK3, }; /* diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 277f4b964df..490c5b37b6d 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -125,6 +125,8 @@ struct regulator_bulk_data { /* regulator get and put */ struct regulator *__must_check regulator_get(struct device *dev, const char *id); +struct regulator *__must_check regulator_get_exclusive(struct device *dev, + const char *id); void regulator_put(struct regulator *regulator); /* regulator output control and status */ @@ -144,6 +146,8 @@ void regulator_bulk_free(int num_consumers, int regulator_count_voltages(struct regulator *regulator); int regulator_list_voltage(struct regulator *regulator, unsigned selector); +int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ce1be708ca1..31f2055eae2 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -37,7 +37,8 @@ enum regulator_status { * * @enable: Configure the regulator as enabled. * @disable: Configure the regulator as disabled. - * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. + * @is_enabled: Return 1 if the regulator is enabled, 0 if not. + * May also return negative errno. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. @@ -162,6 +163,8 @@ struct regulator_desc { struct regulator_dev { struct regulator_desc *desc; int use_count; + int open_count; + int exclusive; /* lists we belong to */ struct list_head list; /* list of all regulators */ diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 91b4da31f1b..e94a4a1c7c8 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -5,6 +5,9 @@ * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros <ext-roger.quadros@nokia.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the @@ -16,9 +19,30 @@ struct regulator_init_data; +/** + * struct fixed_voltage_config - fixed_voltage_config structure + * @supply_name: Name of the regulator supply + * @microvolts: Output voltage of regulator + * @gpio: GPIO to use for enable control + * set to -EINVAL if not used + * @enable_high: Polarity of enable GPIO + * 1 = Active high, 0 = Active low + * @enabled_at_boot: Whether regulator has been enabled at + * boot or not. 1 = Yes, 0 = No + * This is used to keep the regulator at + * the default state + * @init_data: regulator_init_data + * + * This structure contains fixed voltage regulator configuration + * information that must be passed by platform code to the fixed + * voltage regulator driver. + */ struct fixed_voltage_config { const char *supply_name; int microvolts; + int gpio; + unsigned enable_high:1; + unsigned enabled_at_boot:1; struct regulator_init_data *init_data; }; diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index bac64fa390f..87f5f176d4e 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -41,7 +41,7 @@ struct regulator; #define REGULATOR_CHANGE_DRMS 0x10 /** - * struct regulator_state - regulator state during low power syatem states + * struct regulator_state - regulator state during low power system states * * This describes a regulators state during a system wide low power state. * @@ -117,25 +117,37 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; - /* constriant flags */ + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ - unsigned apply_uV:1; /* apply uV constraint iff min == max */ + unsigned apply_uV:1; /* apply uV constraint if min == max */ }; /** * struct regulator_consumer_supply - supply -> device mapping * - * This maps a supply name to a device. + * This maps a supply name to a device. Only one of dev or dev_name + * can be specified. Use of dev_name allows support for buses which + * make struct device available late such as I2C and is the preferred + * form. * * @dev: Device structure for the consumer. + * @dev_name: Result of dev_name() for the consumer. * @supply: Name for the supply. */ struct regulator_consumer_supply { struct device *dev; /* consumer */ + const char *dev_name; /* dev_name() for consumer */ const char *supply; /* consumer supply - e.g. "vcc" */ }; +/* Initialize struct regulator_consumer_supply */ +#define REGULATOR_SUPPLY(_name, _dev_name) \ +{ \ + .supply = _name, \ + .dev_name = _dev_name, \ +} + /** * struct regulator_init_data - regulator platform initialisation data. * @@ -166,6 +178,12 @@ struct regulator_init_data { int regulator_suspend_prepare(suspend_state_t state); +#ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); +#else +static inline void regulator_has_full_constraints(void) +{ +} +#endif #endif diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 44563192bf1..de9a7fae20b 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -36,7 +36,7 @@ * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) * @name: regulator cute name (example for V3: "vcc_core") - * @platform_data: regulator init data (contraints, supplies, ...) + * @platform_data: regulator init data (constraints, supplies, ...) */ struct max1586_subdev_data { int id; @@ -46,7 +46,7 @@ struct max1586_subdev_data { /** * max1586_platform_data - platform data for max1586 - * @num_subdevs: number of regultors used (may be 1 or 2) + * @num_subdevs: number of regulators used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. * @v3_gain: gain on the V3 voltage output multiplied by 1e6. |