diff options
| -rw-r--r-- | drivers/mmc/core/sdio.c | 285 |
1 files changed, 196 insertions, 89 deletions
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 2d24a123f0b..f4c8637fd07 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -218,6 +218,134 @@ static int sdio_enable_hs(struct mmc_card *card) } /* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + + BUG_ON(!host); + WARN_ON(!host->claimed); + + /* + * Inform the card of the voltage + */ + err = mmc_send_io_op_cond(host, host->ocr, &ocr); + if (err) + goto err; + + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, NULL); + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto err; + } + + card->type = MMC_TYPE_SDIO; + + /* + * For native busses: set card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto remove; + + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto remove; + } + + /* + * Read the common registers. + */ + err = sdio_read_cccr(card); + if (err) + goto remove; + + /* + * Read the common CIS tuples. + */ + err = sdio_read_common_cis(card); + if (err) + goto remove; + + if (oldcard) { + int same = (card->cis.vendor == oldcard->cis.vendor && + card->cis.device == oldcard->cis.device); + mmc_remove_card(card); + if (!same) { + err = -ENOENT; + goto err; + } + card = oldcard; + } + + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err) + goto remove; + + /* + * Change to the card's maximum speed. + */ + if (mmc_card_highspeed(card)) { + /* + * The SDIO specification doesn't mention how + * the CIS transfer speed register relates to + * high-speed, but it seems that 50 MHz is + * mandatory. + */ + mmc_set_clock(host, 50000000); + } else { + mmc_set_clock(host, card->cis.max_dtr); + } + + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_wide(card); + if (err) + goto remove; + + if (!oldcard) + host->card = card; + return 0; + +remove: + if (!oldcard) + mmc_remove_card(card); + +err: + return err; +} + +/* * Host is being removed. Free up the current card. */ static void mmc_sdio_remove(struct mmc_host *host) @@ -266,10 +394,74 @@ static void mmc_sdio_detect(struct mmc_host *host) } } +/* + * SDIO suspend. We need to suspend all functions separately. + * Therefore all registered functions must have drivers with suspend + * and resume methods. Failing that we simply remove the whole card. + */ +static void mmc_sdio_suspend(struct mmc_host *host) +{ + int i; + + /* make sure all registered functions can suspend/resume */ + for (i = 0; i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + if (!pmops || !pmops->suspend || !pmops->resume) { + /* just remove the entire card in that case */ + mmc_sdio_remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_release_host(host); + return; + } + } + } + + /* now suspend them */ + for (i = 0; i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + pmops->suspend(&func->dev); + } + } +} + +static void mmc_sdio_resume(struct mmc_host *host) +{ + int i, err; + + BUG_ON(!host); + BUG_ON(!host->card); + + mmc_claim_host(host); + err = mmc_sdio_init_card(host, host->ocr, host->card); + mmc_release_host(host); + if (err) { + mmc_sdio_remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_release_host(host); + return; + } + + /* resume all functions */ + for (i = 0; i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + pmops->resume(&func->dev); + } + } +} static const struct mmc_bus_ops mmc_sdio_ops = { .remove = mmc_sdio_remove, .detect = mmc_sdio_detect, + .suspend = mmc_sdio_suspend, + .resume = mmc_sdio_resume, }; @@ -309,103 +501,18 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) } /* - * Inform the card of the voltage + * Detect and init the card. */ - err = mmc_send_io_op_cond(host, host->ocr, &ocr); + err = mmc_sdio_init_card(host, host->ocr, NULL); if (err) goto err; - - /* - * For SPI, enable CRC as appropriate. - */ - if (mmc_host_is_spi(host)) { - err = mmc_spi_set_crc(host, use_spi_crc); - if (err) - goto err; - } + card = host->card; /* * The number of functions on the card is encoded inside * the ocr. */ - funcs = (ocr & 0x70000000) >> 28; - - /* - * Allocate card structure. - */ - card = mmc_alloc_card(host, NULL); - if (IS_ERR(card)) { - err = PTR_ERR(card); - goto err; - } - - card->type = MMC_TYPE_SDIO; - card->sdio_funcs = funcs; - - host->card = card; - - /* - * For native busses: set card RCA and quit open drain mode. - */ - if (!mmc_host_is_spi(host)) { - err = mmc_send_relative_addr(host, &card->rca); - if (err) - goto remove; - - mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); - } - - /* - * Select card, as all following commands rely on that. - */ - if (!mmc_host_is_spi(host)) { - err = mmc_select_card(card); - if (err) - goto remove; - } - - /* - * Read the common registers. - */ - err = sdio_read_cccr(card); - if (err) - goto remove; - - /* - * Read the common CIS tuples. - */ - err = sdio_read_common_cis(card); - if (err) - goto remove; - - /* - * Switch to high-speed (if supported). - */ - err = sdio_enable_hs(card); - if (err) - goto remove; - - /* - * Change to the card's maximum speed. - */ - if (mmc_card_highspeed(card)) { - /* - * The SDIO specification doesn't mention how - * the CIS transfer speed register relates to - * high-speed, but it seems that 50 MHz is - * mandatory. - */ - mmc_set_clock(host, 50000000); - } else { - mmc_set_clock(host, card->cis.max_dtr); - } - - /* - * Switch to wider bus (if supported). - */ - err = sdio_enable_wide(card); - if (err) - goto remove; + card->sdio_funcs = funcs = (ocr & 0x70000000) >> 28; /* * If needed, disconnect card detection pull-up resistor. |