diff options
-rw-r--r-- | drivers/char/agp/intel-agp.h | 1 | ||||
-rw-r--r-- | drivers/char/agp/intel-gtt.c | 56 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_gem_tiling.c | 16 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/i915_irq.c | 6 | ||||
-rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 95 |
5 files changed, 127 insertions, 47 deletions
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index c195bfeade1..5feebe2800e 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -130,6 +130,7 @@ #define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) #define I915_IFPADDR 0x60 +#define I830_HIC 0x70 /* Intel 965G registers */ #define I965_MSAC 0x62 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index fab3d3265ad..0d09b537bb9 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/pagemap.h> #include <linux/agp_backend.h> +#include <linux/delay.h> #include <asm/smp.h> #include "agp.h" #include "intel-agp.h" @@ -70,12 +71,8 @@ static struct _intel_private { u32 __iomem *gtt; /* I915G */ bool clear_fake_agp; /* on first access via agp, fill with scratch */ int num_dcache_entries; - union { - void __iomem *i9xx_flush_page; - void *i8xx_flush_page; - }; + void __iomem *i9xx_flush_page; char *i81x_gtt_table; - struct page *i8xx_page; struct resource ifp_resource; int resource_valid; struct page *scratch_page; @@ -722,28 +719,6 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - if (intel_private.i8xx_flush_page) { - kunmap(intel_private.i8xx_flush_page); - intel_private.i8xx_flush_page = NULL; - } - - __free_page(intel_private.i8xx_page); - intel_private.i8xx_page = NULL; -} - -static void intel_i830_setup_flush(void) -{ - /* return if we've already set the flush mechanism up */ - if (intel_private.i8xx_page) - return; - - intel_private.i8xx_page = alloc_page(GFP_KERNEL); - if (!intel_private.i8xx_page) - return; - - intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page); - if (!intel_private.i8xx_flush_page) - i830_cleanup(); } /* The chipset_flush interface needs to get data that has already been @@ -758,14 +733,27 @@ static void intel_i830_setup_flush(void) */ static void i830_chipset_flush(void) { - unsigned int *pg = intel_private.i8xx_flush_page; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* Forcibly evict everything from the CPU write buffers. + * clflush appears to be insufficient. + */ + wbinvd_on_all_cpus(); + + /* Now we've only seen documents for this magic bit on 855GM, + * we hope it exists for the other gen2 chipsets... + * + * Also works as advertised on my 845G. + */ + writel(readl(intel_private.registers+I830_HIC) | (1<<31), + intel_private.registers+I830_HIC); - memset(pg, 0, 1024); + while (readl(intel_private.registers+I830_HIC) & (1<<31)) { + if (time_after(jiffies, timeout)) + break; - if (cpu_has_clflush) - clflush_cache_range(pg, 1024); - else if (wbinvd_on_all_cpus() != 0) - printk(KERN_ERR "Timed out waiting for cache flush.\n"); + udelay(50); + } } static void i830_write_entry(dma_addr_t addr, unsigned int entry, @@ -849,8 +837,6 @@ static int i830_setup(void) intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE; - intel_i830_setup_flush(); - return 0; } diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 22a32b9932c..79a04fde69b 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) static bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { - int tile_width; + int tile_width, tile_height; /* Linear is always fine */ if (tiling_mode == I915_TILING_NONE) @@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) } } + if (IS_GEN2(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) + tile_height = 32; + else + tile_height = 8; + /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even + * number of tile rows. */ + if (IS_GEN2(dev)) + tile_height *= 2; + + /* Size needs to be aligned to a full tile row */ + if (size & (tile_height * stride - 1)) + return false; + /* 965+ just needs multiples of tile width */ if (INTEL_INFO(dev)->gen >= 4) { if (stride & (tile_width - 1)) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 97f946dcc1a..8a9e08bf1cf 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work) struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; + DRM_DEBUG_KMS("running encoder hotplug functions\n"); + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->hot_plug) encoder->hot_plug(encoder); @@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev) } else { hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; - hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK; - I915_WRITE(FDI_RXA_IMR, 0); - I915_WRITE(FDI_RXB_IMR, 0); + hotplug_mask |= SDE_AUX_MASK; } dev_priv->pch_irq_mask = ~hotplug_mask; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3b006536b3d..e79b25bbee6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || atomic_read(&obj->pending_flip) == 0); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. */ ret = i915_gem_object_flush_gpu(obj, false); - if (ret) { - i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + (void) ret; } ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, @@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) atomic_read(&obj->pending_flip) == 0); } +static bool intel_crtc_driving_pch(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + /* + * If there's a non-PCH eDP on this crtc, it must be DP_A, and that + * must be driven by its own crtc; no sharing is possible. + */ + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_EDP: + if (!intel_encoder_is_pch_edp(&encoder->base)) + return false; + continue; + } + } + + return true; +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + bool is_pch_port = false; if (intel_crtc->active) return; @@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } - ironlake_fdi_enable(crtc); + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else { + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); + } /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_flush_display_plane(dev, plane); } + /* Skip the PCH stuff if possible */ + if (!is_pch_port) + goto done; + /* For PCH output, training FDI link */ if (IS_GEN6(dev)) gen6_fdi_link_train(crtc); @@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); - +done: intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); @@ -6496,7 +6575,7 @@ static void ironlake_disable_rc6(struct drm_device *dev) POSTING_READ(RSTDBYCTL); } - ironlake_disable_rc6(dev); + ironlake_teardown_rc6(dev); } static int ironlake_setup_rc6(struct drm_device *dev) |